-- ***************************************************************** -- FORCE10-TRAP-ALRM-MIB -- -- -- Copyright (c) 2003-2005 by Force10 Networks, Inc. -- All rights reserved. -- ***************************************************************** -- FORCE10-TRAP-EVENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32,IpAddress, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus,DateAndTime, DisplayString,RowPointer FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF f10Mgmt FROM FORCE10-SMI ; f10TrapEventMib MODULE-IDENTITY LAST-UPDATED "200510050000Z" ORGANIZATION "Force10 Networks, Inc." CONTACT-INFO "Force10 Networks, Inc 1440 McCarthy Blvd Milpitas, CA 95035 (408) 571-3500 support@force10networks.com http://www.force10networks.com" DESCRIPTION "Force10 Trap Alarm MIB. Force10 Trap Event MIB allows users to track or to view the trap events logged by the system. There are two types of trap event tables, hostory trap event table and active trap event table. All the traps sent by the system are logged to history trap event table. The trap that need action will logged to active trap event table; 'Card down' trap event will go to the active trap event table, and the trap will be cleared as soon as 'Card Up' event is issued. " ::= { f10Mgmt 6 } f10TrapEventObjects OBJECT IDENTIFIER ::= { f10TrapEventMib 1 } f10HistoryTrapEvent OBJECT IDENTIFIER ::= { f10TrapEventObjects 1 } f10ActiveTrapEvent OBJECT IDENTIFIER ::= { f10TrapEventObjects 2 } f10TrapVarbindEvent OBJECT IDENTIFIER ::= { f10TrapEventObjects 3 } -- TEXTUAL-CONVENTION -- Status -- mandatory -- Descr f10ChassisTrapEventId OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The f10ChassisTrapEventId used the timestamp as the ID to uniquely identify the current trap event table. Each time a NMS connect to F10 Chassis, it should verify its f10ChassisTrapEventId. If the ID is different, it should refresh its history and active tables. But, if the f10ChassisTrapEventId is the same, then it should query the f10LastTrapEventSeqId and update its history and active tables from its own f10LastTrapEventSeqId to the chassis f10LastTrapEventSeqId. " ::= { f10HistoryTrapEvent 1 } f10LastTrapEventSeqId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " f10LastTrapEventSeqId is a sequential ID indicated the number of traps sent by the syatem since chassis is loaded. The same id can also be used as the index to the history and active tables. Anytime, if an NMS dropped its connection with F10 Chassis, it should sync up its history tables from its own f10LastTrapEventSeqId to the chassis f10LastTrapEventSeqId. " ::= { f10HistoryTrapEvent 2 } f10MaxHistoryTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " f10MaxHistoryTableSize is the maximum rows in history table. This also limits the active/varbind tables. Whenever there is a chance of overflow, the oldest entry will be deleted form the history table. Respective entry from active table also will be deleted and the corresponding varbind entries will be deleted from varbind table. " ::= { f10HistoryTrapEvent 3 } f10HistoryTrapEventTable OBJECT-TYPE SYNTAX SEQUENCE OF F10HistoryTrapEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of history trap event table." ::= { f10HistoryTrapEvent 4 } f10HistoryTrapEventEntry OBJECT-TYPE SYNTAX F10HistoryTrapEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of history trap event table. " INDEX { historyTrapEventSeqId } ::= { f10HistoryTrapEventTable 1 } F10HistoryTrapEventEntry ::= SEQUENCE { historyTrapEventSeqId Integer32, historyTrapEventSeverity Integer32, historyTrapEventType Integer32, historyTrapEventMsg DisplayString, historyTrapEventOid RowPointer, historyTrapEventSlotPort Integer32, historyTrapEventTimeStamp TimeTicks } historyTrapEventSeqId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " historyTrapEventSeqId is a sequential ID and the index to history trap table. " ::= { f10HistoryTrapEventEntry 1 } historyTrapEventSeverity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The trap severity level. " ::= { f10HistoryTrapEventEntry 2 } historyTrapEventType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The trap category type. " ::= { f10HistoryTrapEventEntry 3 } historyTrapEventMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The message or the description of the trap. " ::= { f10HistoryTrapEventEntry 4 } historyTrapEventOid OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of this trap. " ::= { f10HistoryTrapEventEntry 5 } historyTrapEventSlotPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The slot or port number that relate to this trap. for example if card is down, this field will have the card slot number. " ::= { f10HistoryTrapEventEntry 6 } historyTrapEventTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The timestamp when the trap is sent. " ::= { f10HistoryTrapEventEntry 7 } -- End of historyTrapEventTable -- Active Trap Event table. f10ActiveTrapEventTable OBJECT-TYPE SYNTAX SEQUENCE OF F10ActiveTrapEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of active trap event table." ::= { f10ActiveTrapEvent 1 } f10ActiveTrapEventEntry OBJECT-TYPE SYNTAX F10ActiveTrapEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of active trap event table. " INDEX { activeTrapEventSeqId } ::= { f10ActiveTrapEventTable 1 } F10ActiveTrapEventEntry ::= SEQUENCE { activeTrapEventSeqId Integer32, activeTrapEventSeverity Integer32, activeTrapEventType Integer32, activeTrapEventMsg DisplayString, activeTrapEventOid RowPointer, activeTrapEventSlotPort Integer32, activeTrapEventTimeStamp TimeTicks } activeTrapEventSeqId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " activeTrapEventSeqId is a sequential ID and the index to active trap table. " ::= { f10ActiveTrapEventEntry 1 } activeTrapEventSeverity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The trap severity level. " ::= { f10ActiveTrapEventEntry 2 } activeTrapEventType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The trap category type. " ::= { f10ActiveTrapEventEntry 3 } activeTrapEventMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The message or the description of the trap. " ::= { f10ActiveTrapEventEntry 4 } activeTrapEventOid OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of this trap. " ::= { f10ActiveTrapEventEntry 5 } activeTrapEventSlotPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The numeric iof slot or port that relate to this trap. for example if card is down, this field will have the card slot number. " ::= { f10ActiveTrapEventEntry 6 } activeTrapEventTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The timestamp when the trap is sent. " ::= { f10ActiveTrapEventEntry 7 } -- End of ActiveTrapEventTable -- Trap Event varbind table. f10TrapEventVarbindTable OBJECT-TYPE SYNTAX SEQUENCE OF F10TrapEventVarbindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of trap event varbind table." ::= { f10TrapVarbindEvent 1 } f10TrapEventVarbindEntry OBJECT-TYPE SYNTAX F10TrapEventVarbindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of trap event varbind table. " INDEX { trapEventVarbindSeqId, trapEventVarbindId } ::= { f10TrapEventVarbindTable 1 } F10TrapEventVarbindEntry ::= SEQUENCE { trapEventVarbindSeqId Integer32, trapEventVarbindId Integer32, trapEventVarbindOid OBJECT IDENTIFIER, trapEventVarbindType Integer32, trapEventVarbindValue DisplayString } trapEventVarbindSeqId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " trapEventVarbindSeqId is a sequential ID and the index to varbind trap table. " ::= { f10TrapEventVarbindEntry 1 } trapEventVarbindId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " trapEventVarbindId is the ID and the index to history trap table. " ::= { f10TrapEventVarbindEntry 2 } trapEventVarbindOid OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of this trap. " ::= { f10TrapEventVarbindEntry 3 } trapEventVarbindType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The trap category type. " ::= { f10TrapEventVarbindEntry 4 } trapEventVarbindValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " This is the result or data in this trap. " ::= { f10TrapEventVarbindEntry 5 } END