DKT-GE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
    Counter32                   FROM SNMPv2-SMI
    OBJECT-GROUP				FROM SNMPv2-CONF
    dkt                         FROM DKT-MIB;

geMIB MODULE-IDENTITY
    LAST-UPDATED  "200901140000Z"
    ORGANIZATION "DKT A/S"
    CONTACT-INFO
        "postal:  DKT A/S
                  Fanoevej 6
                  DK-4060 Kirke Saaby
                  Denmark

         email:   info@dktcomega.com"
    DESCRIPTION   "DKT Gigabit MIB."
    ::= { dkt 14 }

geSwitchEngine OBJECT IDENTIFIER ::= { geMIB 1 }


geATU OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..20480))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Dumps the Address Translation Unit (ATU) Switch table in semi colon format" 
    ::= { geSwitchEngine 1 }

geUnicastDelete
 OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table."
    ::= { geSwitchEngine 2 }

geMulticastDelete
 OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Removes a multicast IP address from the Address Translation Unit (ATU) Switch table."
    ::= { geSwitchEngine 3 }

geIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port"
    ::= { geSwitchEngine 4 }

geVTU OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..9600))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Dumps the VLAN Table Unit (VTU) Switch table in semi colon format"  
    ::= { geSwitchEngine 5 }

geVLANCreate OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE"
    ::= { geSwitchEngine 6 }

geVLANDelete OBJECT-TYPE
    SYNTAX	INTEGER (0..4095)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Deletes a VLAN, input parameter is VLAN VID: 0 - 4095"
    ::= { geSwitchEngine 7 }

geClearVTU OBJECT-TYPE
    SYNTAX	INTEGER (1)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table"
    ::= { geSwitchEngine 8 }

geDumpPIRLBuckets OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Dumps a list of the active buckets."
    ::= { geSwitchEngine 9 }

geVLANProviderMode OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled.  NOTE: Provider VLAN ID should be setup in port default VID for the originating port."
    ::= { geSwitchEngine 10 }

gePorts OBJECT IDENTIFIER ::= { geMIB 2 }

geCPUPort OBJECT IDENTIFIER ::= { gePorts 1 }

geCPUPortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 1 }

geCPUPortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO"
    ::= { geCPUPort 2 }


geCPUPortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geCPUPort 3 }


geCPUPortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 4 }


geCPUPortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 5 }


geCPUPortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 6 }

geCPUPortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 7 }


geCPUPortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 8 }


geCPUPortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geCPUPort 9 }


geCPUPortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geCPUPort 10 }


geCPUPortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geCPUPort 11 }


geCPUPortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geCPUPort 12 }


geCPUPortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 13 }


geCPUPortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geCPUPort 14 }


geCPUPortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geCPUPort 15 }


geCPUPortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geCPUPort 16 }


geCPUPortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geCPUPort 17 }


geCPUPortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geCPUPort 18 }


geCPUPortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geCPUPort 19 }




geWANPort OBJECT IDENTIFIER ::= { gePorts 2 }

geWANPortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 1 }

geWANPortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
    ::= { geWANPort 2 }


geWANPortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geWANPort 3 }


geWANPortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 4 }


geWANPortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 5 }


geWANPortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 6 }

geWANPortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 7 }


geWANPortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 8 }


geWANPortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geWANPort 9 }


geWANPortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geWANPort 10 }


geWANPortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geWANPort 11 }


geWANPortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geWANPort 12 }


geWANPortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 13 }


geWANPortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geWANPort 14 }


geWANPortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geWANPort 15 }


geWANPortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geWANPort 16 }


geWANPortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geWANPort 17 }


geWANPortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geWANPort 18 }


geWANPortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geWANPort 19 }

geWANPortArpMirroring OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Mirror ARP packets seen on the port to the CPU port."
    ::= { geWANPort 20 }


geLAN1Port OBJECT IDENTIFIER ::= { gePorts 3 }

geLAN1PortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 1 }

geLAN1PortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
    ::= { geLAN1Port 2 }


geLAN1PortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geLAN1Port 3 }


geLAN1PortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 4 }


geLAN1PortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 5 }


geLAN1PortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 6 }

geLAN1PortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 7 }


geLAN1PortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 8 }


geLAN1PortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geLAN1Port 9 }


geLAN1PortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geLAN1Port 10 }


geLAN1PortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geLAN1Port 11 }


geLAN1PortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geLAN1Port 12 }


geLAN1PortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 13 }


geLAN1PortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geLAN1Port 14 }


geLAN1PortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geLAN1Port 15 }


geLAN1PortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geLAN1Port 16 }


geLAN1PortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geLAN1Port 17 }


geLAN1PortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geLAN1Port 18 }


geLAN1PortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geLAN1Port 19 }

geLAN1PortArpMirroring OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Mirror ARP packets seen on the port to the CPU port."
    ::= { geLAN1Port 20 }



geLAN2Port OBJECT IDENTIFIER ::= { gePorts 4 }

geLAN2PortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 1 }

geLAN2PortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
    ::= { geLAN2Port 2 }


geLAN2PortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geLAN2Port 3 }


geLAN2PortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 4 }


geLAN2PortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 5 }


geLAN2PortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 6 }

geLAN2PortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 7 }


geLAN2PortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 8 }


geLAN2PortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geLAN2Port 9 }


geLAN2PortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geLAN2Port 10 }


geLAN2PortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geLAN2Port 11 }


geLAN2PortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geLAN2Port 12 }


geLAN2PortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 13 }


geLAN2PortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geLAN2Port 14 }


geLAN2PortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geLAN2Port 15 }


geLAN2PortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geLAN2Port 16 }


geLAN2PortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geLAN2Port 17 }


geLAN2PortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geLAN2Port 18 }


geLAN2PortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geLAN2Port 19 }

geLAN2PortArpMirroring OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Mirror ARP packets seen on the port to the CPU port."
    ::= { geLAN2Port 20 }



geLAN3Port OBJECT IDENTIFIER ::= { gePorts 5 }

geLAN3PortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 1 }

geLAN3PortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
    ::= { geLAN3Port 2 }


geLAN3PortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geLAN3Port 3 }


geLAN3PortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 4 }


geLAN3PortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 5 }


geLAN3PortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 6 }

geLAN3PortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 7 }


geLAN3PortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 8 }


geLAN3PortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geLAN3Port 9 }


geLAN3PortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geLAN3Port 10 }


geLAN3PortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geLAN3Port 11 }


geLAN3PortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geLAN3Port 12 }


geLAN3PortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 13 }


geLAN3PortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geLAN3Port 14 }


geLAN3PortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geLAN3Port 15 }


geLAN3PortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geLAN3Port 16 }


geLAN3PortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geLAN3Port 17 }


geLAN3PortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geLAN3Port 18 }


geLAN3PortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geLAN3Port 19 }

geLAN3PortArpMirroring OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Mirror ARP packets seen on the port to the CPU port."
    ::= { geLAN3Port 20 }



geLAN4Port OBJECT IDENTIFIER ::= { gePorts 6 }

geLAN4PortAutoNegotiation OBJECT-TYPE
    SYNTAX	INTEGER (0..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 1 }

geLAN4PortSpeedMode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..10))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION  
	"Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD)"
    ::= { geLAN4Port 2 }


geLAN4PortLinkStatus OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Gets the Link status for the port"
    ::= { geLAN4Port 3 }


geLAN4PortFlowControl OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables flow control on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 4 }


geLAN4PortIEEEQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 5 }


geLAN4PortIPQoSPriority OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 6 }

geLAN4PortQoSPortMapRule OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces queue priority for a port. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 7 }


geLAN4PortVIDNRLEnable OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 8 }


geLAN4PortDisablePIRL2Bucket OBJECT-TYPE
    SYNTAX	INTEGER (0..4)
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4."
    ::= { geLAN4Port 9 }


geLAN4PortEgressRateLimitation OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the egress limitation rate for the port. Input parameter is value in kbps"
    ::= { geLAN4Port 10 }


geLAN4PortIngressRateLimitation OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)"
    ::= { geLAN4Port 11 }


geLAN4PortDefaultVLAN OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095"
    ::= { geLAN4Port 12 }


geLAN4PortForceDefaultVID OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 13 }


geLAN4PortVLANPortMode OBJECT-TYPE
    SYNTAX	INTEGER (0..3)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Sets the 802.1Q mode for the ingress port.
       Mode either 0=disable,
                   1=fallback,
                   2=check,
                   3=secure"
    ::= { geLAN4Port 14 }


geLAN4PortBlockAllUnknown OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID."
    ::= { geLAN4Port 15 }


geLAN4PortIGMPSnooping OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable."
    ::= { geLAN4Port 16 }


geLAN4PortAddUnicast OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..100))
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff"
    ::= { geLAN4Port 17 }


geLAN4PortAddMulticast OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	write-only
    STATUS	current
    DESCRIPTION
	"Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd"
    ::= { geLAN4Port 18 }


geLAN4PortMtu OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The MTU size of the port."
    ::= { geLAN4Port 19 }

geLAN4PortArpMirroring OBJECT-TYPE
    SYNTAX	INTEGER (0..1)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Mirror ARP packets seen on the port to the CPU port."
    ::= { geLAN4Port 20 }




geModuleGroup OBJECT-GROUP
	OBJECTS {
		geSwitchEngine,
		geATU,
		geUnicastDelete,
		geMulticastDelete,
		geIGMPSnooping,
		geVTU,
		geVLANCreate,
		geVLANDelete,
		geClearVTU,
		geVLANProviderMode,
		gePorts,
		geDumpPIRLBuckets,
		geCPUPort,
		geCPUPortAutoNegotiation, geCPUPortSpeedMode, geCPUPortLinkStatus, geCPUPortFlowControl, geCPUPortIEEEQoSPriority, geCPUPortIPQoSPriority, geCPUPortQoSPortMapRule, geCPUPortVIDNRLEnable, geCPUPortDisablePIRL2Bucket, geCPUPortEgressRateLimitation, geCPUPortIngressRateLimitation, geCPUPortDefaultVLAN, geCPUPortForceDefaultVID, geCPUPortVLANPortMode, geCPUPortBlockAllUnknown, geCPUPortIGMPSnooping, geCPUPortAddUnicast, geCPUPortAddMulticast, geCPUPortMtu, 
		geWANPort,
		geWANPortAutoNegotiation, geWANPortSpeedMode, geWANPortLinkStatus, geWANPortFlowControl, geWANPortIEEEQoSPriority, geWANPortIPQoSPriority, geWANPortQoSPortMapRule, geWANPortVIDNRLEnable, geWANPortDisablePIRL2Bucket, geWANPortEgressRateLimitation, geWANPortIngressRateLimitation, geWANPortDefaultVLAN, geWANPortForceDefaultVID, geWANPortVLANPortMode, geWANPortBlockAllUnknown, geWANPortIGMPSnooping, geWANPortAddUnicast, geWANPortAddMulticast,  geWANPortMtu, geWANPortArpMirroring, 
		geLAN1Port,
		geLAN1PortAutoNegotiation, geLAN1PortSpeedMode, geLAN1PortLinkStatus, geLAN1PortFlowControl, geLAN1PortIEEEQoSPriority, geLAN1PortIPQoSPriority, geLAN1PortQoSPortMapRule, geLAN1PortVIDNRLEnable, geLAN1PortDisablePIRL2Bucket, geLAN1PortEgressRateLimitation, geLAN1PortIngressRateLimitation, geLAN1PortDefaultVLAN, geLAN1PortForceDefaultVID, geLAN1PortVLANPortMode, geLAN1PortBlockAllUnknown, geLAN1PortIGMPSnooping, geLAN1PortAddUnicast, geLAN1PortAddMulticast,  geLAN1PortMtu, geLAN1PortArpMirroring, 
		geLAN2Port,
		geLAN2PortAutoNegotiation, geLAN2PortSpeedMode, geLAN2PortLinkStatus, geLAN2PortFlowControl, geLAN2PortIEEEQoSPriority, geLAN2PortIPQoSPriority, geLAN2PortQoSPortMapRule, geLAN2PortVIDNRLEnable, geLAN2PortDisablePIRL2Bucket, geLAN2PortEgressRateLimitation, geLAN2PortIngressRateLimitation, geLAN2PortDefaultVLAN, geLAN2PortForceDefaultVID, geLAN2PortVLANPortMode, geLAN2PortBlockAllUnknown, geLAN2PortIGMPSnooping, geLAN2PortAddUnicast, geLAN2PortAddMulticast,  geLAN2PortMtu, geLAN2PortArpMirroring, 
		geLAN3Port,
		geLAN3PortAutoNegotiation, geLAN3PortSpeedMode, geLAN3PortLinkStatus, geLAN3PortFlowControl, geLAN3PortIEEEQoSPriority, geLAN3PortIPQoSPriority, geLAN3PortQoSPortMapRule, geLAN3PortVIDNRLEnable, geLAN3PortDisablePIRL2Bucket, geLAN3PortEgressRateLimitation, geLAN3PortIngressRateLimitation, geLAN3PortDefaultVLAN, geLAN3PortForceDefaultVID, geLAN3PortVLANPortMode, geLAN3PortBlockAllUnknown, geLAN3PortIGMPSnooping, geLAN3PortAddUnicast, geLAN3PortAddMulticast,  geLAN3PortMtu, geLAN3PortArpMirroring, 
		geLAN4Port,
		geLAN4PortAutoNegotiation, geLAN4PortSpeedMode, geLAN4PortLinkStatus, geLAN4PortFlowControl, geLAN4PortIEEEQoSPriority, geLAN4PortIPQoSPriority, geLAN4PortQoSPortMapRule, geLAN4PortVIDNRLEnable, geLAN4PortDisablePIRL2Bucket, geLAN4PortEgressRateLimitation, geLAN4PortIngressRateLimitation, geLAN4PortDefaultVLAN, geLAN4PortForceDefaultVID, geLAN4PortVLANPortMode, geLAN4PortBlockAllUnknown, geLAN4PortIGMPSnooping, geLAN4PortAddUnicast, geLAN4PortAddMulticast,  geLAN4PortMtu, geLAN4PortArpMirroring 
	}
    STATUS current
    DESCRIPTION
        "The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00."
    ::= { geMIB 4 }


END