IDKT-F2-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32,
    Counter32                   FROM SNMPv2-SMI
    OBJECT-GROUP                FROM SNMPv2-CONF
    dkt                         FROM DKT-MIB
    MacAddress                  FROM SNMPv2-TC;

f2MIB MODULE-IDENTITY
    LAST-UPDATED  "201504210000Z"
    ORGANIZATION "DKT A/S"
    CONTACT-INFO
        "postal:  DKT A/S
                  Fanoevej 6
                  DK-4060 Kirke Saaby
                  Denmark

         email:   info@dktcomega.com"
    DESCRIPTION   "DKT 797xx series MIB."
    ::= { dkt 15 }

f2SwitchEngine OBJECT IDENTIFIER ::= { f2MIB 1 }

f2IGMPSnooping OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled."
    ::= { f2SwitchEngine 1 }

f2MTU OBJECT-TYPE
    SYNTAX      INTEGER (0..8960)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes)"
    ::= { f2SwitchEngine 2 }

f2FWDTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF F2FWDMacAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Get learned MAC addresses from LAN side of switch engine"
    ::= { f2SwitchEngine 3 }

f2FWDMacAddressEntry OBJECT-TYPE
    SYNTAX      F2FWDMacAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Learned MAC address from LAN side of switch engine"
    ::= { f2FWDTable 1 }

F2FWDMacAddressEntry ::= SEQUENCE {
    F2FWDMacAddress OCTET STRING
}

F2FWDMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MAC address from LAN"
    ::= { f2FWDMacAddressEntry 1 }

f2Ports OBJECT IDENTIFIER ::= { f2MIB 2 }

f2CPUPort OBJECT IDENTIFIER ::= { f2Ports 1 }

f2CPUPortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2CPUPort 1 }

f2CPUPortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port."
    ::= { f2CPUPort 2 }


f2CPUPortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2CPUPort 3 }


f2CPUPortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2CPUPort 4 }


f2CPUPortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Status for CPU port. Always 1 for enabled."
    ::= { f2CPUPort 5 }


f2WANPort OBJECT IDENTIFIER ::= { f2Ports 2 }

f2WANPortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2WANPort 1 }

f2WANPortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
    ::= { f2WANPort 2 }


f2WANPortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2WANPort 3 }


f2WANPortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2WANPort 4 }


f2WANPortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Status for WAN port. Always 1 for enabled."
    ::= { f2WANPort 5 }



f2LAN1Port OBJECT IDENTIFIER ::= { f2Ports 3 }

f2LAN1PortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2LAN1Port 1 }

f2LAN1PortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
    ::= { f2LAN1Port 2 }


f2LAN1PortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2LAN1Port 3 }


f2LAN1PortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2LAN1Port 4 }


f2LAN1PortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled."
    ::= { f2LAN1Port 5 }



f2LAN2Port OBJECT IDENTIFIER ::= { f2Ports 4 }

f2LAN2PortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2LAN2Port 1 }

f2LAN2PortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
    ::= { f2LAN2Port 2 }


f2LAN2PortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2LAN2Port 3 }


f2LAN2PortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2LAN2Port 4 }


f2LAN2PortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled."
    ::= { f2LAN2Port 5 }



f2LAN3Port OBJECT IDENTIFIER ::= { f2Ports 5 }

f2LAN3PortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2LAN3Port 1 }

f2LAN3PortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
    ::= { f2LAN3Port 2 }


f2LAN3PortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2LAN3Port 3 }


f2LAN3PortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2LAN3Port 4 }


f2LAN3PortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled."
    ::= { f2LAN3Port 5 }


f2LAN4Port OBJECT IDENTIFIER ::= { f2Ports 6 }

f2LAN4PortAutoNegotiation OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays auto negotiation state for the port."
    ::= { f2LAN4Port 1 }

f2LAN4PortSpeedMode OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..10))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)"
    ::= { f2LAN4Port 2 }


f2LAN4PortLinkStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the Link status for the port"
    ::= { f2LAN4Port 3 }


f2LAN4PortFlowControl OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control"
    ::= { f2LAN4Port 4 }


f2LAN4PortEnable OBJECT-TYPE
    SYNTAX      INTEGER (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled."
    ::= { f2LAN4Port 5 }




f2ModuleGroup OBJECT-GROUP
        OBJECTS {
                f2SwitchEngine,
                f2IGMPSnooping,
                f2MTU,
                f2Ports,
                f2CPUPort,
                f2CPUPortAutoNegotiation, f2CPUPortSpeedMode, f2CPUPortLinkStatus, f2CPUPortFlowControl, f2CPUPortEnable, 
                f2WANPort,
                f2WANPortAutoNegotiation, f2WANPortSpeedMode, f2WANPortLinkStatus, f2WANPortFlowControl, f2WANPortEnable, 
                f2LAN1Port,
                f2LAN1PortAutoNegotiation, f2LAN1PortSpeedMode, f2LAN1PortLinkStatus, f2LAN1PortFlowControl, f2LAN1PortEnable, 
                f2LAN2Port,
                f2LAN2PortAutoNegotiation, f2LAN2PortSpeedMode, f2LAN2PortLinkStatus, f2LAN2PortFlowControl, f2LAN2PortEnable, 
                f2LAN3Port,
                f2LAN3PortAutoNegotiation, f2LAN3PortSpeedMode, f2LAN3PortLinkStatus, f2LAN3PortFlowControl, f2LAN3PortEnable, 
                f2LAN4Port,
                f2LAN4PortAutoNegotiation, f2LAN4PortSpeedMode, f2LAN4PortLinkStatus, f2LAN4PortFlowControl, f2LAN4PortEnable
        }
    STATUS current
    DESCRIPTION
        "The objects are related to the DKT 797xx series module, MIB rev 09."
    ::= { f2MIB 3 }


END