-- ***************************************************************** -- DLINKSW-CABLE-DIAG-MIB.mib : Cable Diagnostic MIB -- -- Copyright (c) 2013 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKSW-CABLE-DIAG-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY,OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; dlinkSwCableDiagMIB MODULE-IDENTITY LAST-UPDATED "201301180000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "The MIB module for determining the status of the cables attached to the device." REVISION "201301180000Z" DESCRIPTION " This is the first version of this MIB file. " ::= {dlinkIndustrialCommon 58} DlinkCableDiagStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared. ok(1) - The pair or cable has no error. open(2) - The cable in the error pair does not have a connection at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. " SYNTAX INTEGER { other(0), ok(1), open(2), short(3), openOrShort(4), crosstalk(5), unKnown(6), noCable(7), shutdown(8) } -- ----------------------------------------------------------------------------- dCableDiagNotifications OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 0 } dCableDiagObjects OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 1 } dCableDiagConformance OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 2 } -- ----------------------------------------------------------------------------- -- Notifications -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- Objects -- ----------------------------------------------------------------------------- dCableDiagIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DCableDiagIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains a list of information about test on the device's interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test." ::= { dCableDiagObjects 1 } dCableDiagIfEntry OBJECT-TYPE SYNTAX DCableDiagIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dCableDiagIfTable, contains the testing controls on an interface." INDEX { ifIndex } ::= { dCableDiagIfTable 1 } DCableDiagIfEntry ::= SEQUENCE { dCableDiagIfAction INTEGER } dCableDiagIfAction OBJECT-TYPE SYNTAX INTEGER { noOp(1), test(2), clear(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object control the action to be executed on the interface. noOp(1) - No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. test(2) - Start the test on the interface. clear(3) - Clear all the test results on the interface. The value of the following objects of the entry will become 'other'. -- dCableDiagResultPair1Status -- dCableDiagResultPair2Status -- dCableDiagResultPair3Status -- dCableDiagResultPair4Status The value of the following objects of the entry will become -1 (unavailable) -- dCableDiagResultPair1Length -- dCableDiagResultPair2Length -- dCableDiagResultPair3Length -- dCableDiagResultPair4Length The value of dCableDiagResultStatus of the entry will become 'notRun'. " ::= { dCableDiagIfEntry 1 } -- ----------------------------------------------------------------------------- dCableDiagResultTable OBJECT-TYPE SYNTAX SEQUENCE OF DCableDiagResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains a list of interface's cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port. " ::= { dCableDiagObjects 2 } dCableDiagResultEntry OBJECT-TYPE SYNTAX DCableDiagResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in dCableDiagResultTable contains cable situation of an interface." INDEX { ifIndex } ::= { dCableDiagResultTable 1 } DCableDiagResultEntry ::= SEQUENCE { dCableDiagResultPair1Status DlinkCableDiagStatus, dCableDiagResultPair2Status DlinkCableDiagStatus, dCableDiagResultPair3Status DlinkCableDiagStatus, dCableDiagResultPair4Status DlinkCableDiagStatus, dCableDiagResultPair1Length Integer32, dCableDiagResultPair2Length Integer32, dCableDiagResultPair3Length Integer32, dCableDiagResultPair4Length Integer32, dCableDiagResultStatus INTEGER } dCableDiagResultPair1Status OBJECT-TYPE SYNTAX DlinkCableDiagStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of pair 1 of the cable." ::= { dCableDiagResultEntry 1 } dCableDiagResultPair2Status OBJECT-TYPE SYNTAX DlinkCableDiagStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of pair 2 of the cable." ::= { dCableDiagResultEntry 2 } dCableDiagResultPair3Status OBJECT-TYPE SYNTAX DlinkCableDiagStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of pair 3 of the cable." ::= { dCableDiagResultEntry 3 } dCableDiagResultPair4Status OBJECT-TYPE SYNTAX DlinkCableDiagStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of pair 4 of the cable." ::= { dCableDiagResultEntry 4 } dCableDiagResultPair1Length OBJECT-TYPE SYNTAX Integer32 UNITS "meters" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approximate length or length to the failure of pair 1 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable." ::= { dCableDiagResultEntry 5 } dCableDiagResultPair2Length OBJECT-TYPE SYNTAX Integer32 UNITS "meters" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approximate length or length to the failure of pair 2 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable." ::= { dCableDiagResultEntry 6 } dCableDiagResultPair3Length OBJECT-TYPE SYNTAX Integer32 UNITS "meters" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approximate length or length to the failure of pair 3 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable." ::= { dCableDiagResultEntry 7 } dCableDiagResultPair4Length OBJECT-TYPE SYNTAX Integer32 UNITS "meters" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approximate length or length to the failure of pair 4 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable." ::= { dCableDiagResultEntry 8 } dCableDiagResultStatus OBJECT-TYPE SYNTAX INTEGER { notRun(0), processing(1), lastTestOk(2), lastTestFailed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of cable diagnostics on the interface. notRun(0) - the cable diagnostics has never been run for this interface or the previous result is cleared. processing(1) - the cable diagnostics is currently running on the interface. lastTestOk(2) - the last cable diagnostics was performed successfully on the interface. lastTestFailed(3) - the last cable diagnostics failed on the interface." ::= { dCableDiagResultEntry 9 } -- ----------------------------------------------------------------------------- -- Conformance -- ----------------------------------------------------------------------------- dCableDiagCompliances OBJECT IDENTIFIER ::= { dCableDiagConformance 1 } dCableDiagCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKSW-CABLE-DIAG-MIB." MODULE -- this module MANDATORY-GROUPS { dCableDiagBasicGroup } ::= { dCableDiagCompliances 1 } dCableDiagGroups OBJECT IDENTIFIER ::= { dCableDiagCompliances 2 } dCableDiagBasicGroup OBJECT-GROUP OBJECTS { dCableDiagIfAction, dCableDiagResultPair1Status, dCableDiagResultPair2Status, dCableDiagResultPair3Status, dCableDiagResultPair4Status, dCableDiagResultPair1Length, dCableDiagResultPair2Length, dCableDiagResultPair3Length, dCableDiagResultPair4Length, dCableDiagResultStatus } STATUS current DESCRIPTION "This group contains the collection of objects related to configuration and information of fundamental cable diagnostics feature." ::= { dCableDiagGroups 1 } END