-- ***************************************************************** -- DLINKSW-DHCP-RELAY-MIB.mib : DHCP Relay MIB -- -- Copyright (c) 2012 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKSW-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, TruthValue, RowStatus FROM SNMPv2-TC InterfaceIndex FROM IF-MIB dlinkIndustrialCommon FROM DLINK-ID-REC-MIB Dlink2kVlanList FROM DLINKSW-TC-MIB; dlinkSwDhcpRelayMIB MODULE-IDENTITY LAST-UPDATED "201309260000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "This MIB module defines objects for BOOTP/DHCP relay." REVISION "201307190000Z" DESCRIPTION "This is the first version of the MIB file for 'BOOTP/DHCP Relay' functionality." REVISION "201309090000Z" DESCRIPTION "1.Update dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length(Note:follow UIS). 2.Remove dDhcpRIfIgnoreBootpRowStatus and add dDhcpRIfIgnoreBootpEnabled(Note:follow IP interface). 3.Remove dDhcpRIfAgentInfoChkRowStatus and modify dDhcpRIfAgentInfoChkState SYNTAX(Note:follow IP interface). 4.Remove dDhcpRIfAgentInfoInsertRowStatus and modify dDhcpRIfAgentInfoInsertState SYNTAX(Note:follow IP interface). 5.Remove dDhcpRIfAgentInfoPolicyRowStatus(Note:follow IP interface). 6.Remove dDhcpRIfAgentInfoTrustRowStatus and add dDhcpRIfAgentInfoTrustEnabled(Note:follow IP interface)." REVISION "201309260000Z" DESCRIPTION "1.Modify dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length for IWL test. 2.Update dDhcpRVlanLocalRelayCrlSecond2K description " ::= { dlinkIndustrialCommon 23 } -- ----------------------------------------------------------------------------- dDhcpRelayMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 0 } dDhcpRelayMIBObjects OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 1 } dDhcpRelayMIBConformance OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 2 } -- ----------------------------------------------------------------------------- dDhcpRelayGeneral OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 1 } dDhcpRelayAgentInfoCheckEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the DHCP relay agent validates the relay agent information option in the received DHCP reply packet." DEFVAL { false } ::= { dDhcpRelayGeneral 1 } dDhcpRelayAgentInfoInsertEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the DHCP relay agent inserts relay agent information option (option 82)." DEFVAL { false } ::= { dDhcpRelayGeneral 2 } dDhcpRelayAgentInfoPolicy OBJECT-TYPE SYNTAX INTEGER { drop(1), keep(2), replace(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the re-forwarding policy of DHCP relay agent information option 82. drop (1) - discards the packet that already has the relay option. keep (2) - the DHCP requests packet that already has the relay option is left unchanged and directly relayed to the DHCP server. replace (3) - the DHCP requests packet that already has the relay option will be replaced by a new option." DEFVAL { keep } ::= { dDhcpRelayGeneral 3 } dDhcpRelayInfoTrustAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the DHCP relay agent trusts the DHCP relay information for all interfaces." DEFVAL { false } ::= { dDhcpRelayGeneral 4 } dDhcpRelaySmartRelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of smart relay function. By default, the relay agent sets the gateway address field of the packet to the primary address of the interface. When the received interface of the packet has secondary addresses and smart relay is enabled, relay agent will count the number that a client retries sending of the DISCOVER message. The relay agent will switch the gateway address to secondary address of the received interface after three retries. " DEFVAL { false } ::= { dDhcpRelayGeneral 5 } dDhcpROption82RemoteIdType OBJECT-TYPE SYNTAX INTEGER { default(1), userDefined(2), vendor2(4), vendor3(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of remote ID sub-option. default(1) - MAC address of VLAN 1. userDefined(2) - The value of dDhcpROption82RemoteID is used. vendor2(4) - System Name. vendor3(5) - The value of dDhcpRPortIfOp82RemIdVendor3Cfg of the corresponding entry is used." ::= { dDhcpRelayGeneral 6 } dDhcpROption82RemoteIdUserDef OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the global user defined string as the remote ID of the device. This object can be modified when dDhcpROption82RemoteIdType is set to 'userDefined'. When read, a zero length string is returned when dDhcpROption82RemoteIdType is not 'userDefined'." ::= { dDhcpRelayGeneral 7 } dDhcpROption82CircuitIdType OBJECT-TYPE SYNTAX INTEGER { default(1), userDefined(2), vendor1(3), vendor2(4), vendor3(5), vendor4(6), vendor5(7), vendor6(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of circuit ID sub-option. default(1) - VLAN ID, Module ID and Port Number. userDefined(2) - The value of dDhcpROption82CircuitID is used. vendor1(3) - VLAN ID, Slot ID, Port Number and MAC address of VLAN 1. vendor2(4) - Port Number. vendor3(5) - The value of dDhcpRPortIfOp82CirIdVendor3Cfg of the corresponding entry is used. vendor4(6) - System Name, Module ID, Port Number and Client's VLAN ID. vendor5(7) - System Name, 'eth', Chassis ID, Slot ID, Port Number and Client's VLAN ID. vendor6(8) - 'Ethernet', Chassis ID, Slot ID, Port Number, Client's VLAN ID and System Name. " ::= { dDhcpRelayGeneral 8 } dDhcpROption82CircuitIdUserDef OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the global user defined string as the circuit ID. This object can be modified when dDhcpROption82CircuitIdType is set to 'userDefined'. When read, a zero length string is returned when dDhcpROption82CircuitIdType is not 'userDefined'." ::= { dDhcpRelayGeneral 9 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- dDhcpRPoolObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 2 } dDhcpRPoolClassRelayTargetTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRPoolClassRelayTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains relay target class configuration for DHCP pools." ::= { dDhcpRPoolObjects 1 } dDhcpRPoolClassRelayTargetEntry OBJECT-TYPE SYNTAX DDhcpRPoolClassRelayTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By using DHCP class, DHCP relay uses option configuration to further determine which DHCP relay target for relaying the packet that matches the value pattern of option defined in the class." INDEX { dDhcpRPoClRelayTargetPoolName, dDhcpRPoClRelayTargetClassName, dDhcpRPoClRelayTargetVrfName, dDhcpRPoClRelayTargetAddr } ::= { dDhcpRPoolClassRelayTargetTable 1 } DDhcpRPoolClassRelayTargetEntry ::= SEQUENCE { dDhcpRPoClRelayTargetPoolName DisplayString, dDhcpRPoClRelayTargetClassName DisplayString, dDhcpRPoClRelayTargetVrfName DisplayString, dDhcpRPoClRelayTargetAddr IpAddress, dDhcpRPoClRelayTargetRowStatus RowStatus } dDhcpRPoClRelayTargetPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a DHCP pool. The value must be same as an entry in dDhcpSPoolTable identified by dDhcpSPoolName." REFERENCE "dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB." ::= { dDhcpRPoolClassRelayTargetEntry 1 } dDhcpRPoClRelayTargetClassName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a DHCP class. The value must be same as an entry in dDhcpSClassTable identified by dDhcpSClassName." REFERENCE "dDhcpSClassName is defined in DLINKSW-DHCP-SERVER-MIB." ::= { dDhcpRPoolClassRelayTargetEntry 2 } dDhcpRPoClRelayTargetVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of virtual routing and forwarding (VRF). If this object is a zero length string, the relay target is in global routing and forwarding space." ::= { dDhcpRPoolClassRelayTargetEntry 3 } dDhcpRPoClRelayTargetAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the target server for the class." ::= { dDhcpRPoolClassRelayTargetEntry 4 } dDhcpRPoClRelayTargetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages this entry." ::= { dDhcpRPoolClassRelayTargetEntry 99 } -- ----------------------------------------------------------------------------- dDhcpRPoolRelayDestTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRPoolRelayDestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains DHCP relay destination IP address of DHCP pools." ::= { dDhcpRPoolObjects 2 } dDhcpRPoolRelayDestEntry OBJECT-TYPE SYNTAX DDhcpRPoolRelayDestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By using DHCP class, DHCP relay uses option configuration to further determine which IP addresses to allocate to clients." INDEX { dDhcpRPoolRelayDestPoolName, dDhcpRPoolRelayDestVrfName, dDhcpRPoolRelayDestAddr } ::= { dDhcpRPoolRelayDestTable 1 } DDhcpRPoolRelayDestEntry ::= SEQUENCE { dDhcpRPoolRelayDestPoolName DisplayString, dDhcpRPoolRelayDestVrfName DisplayString, dDhcpRPoolRelayDestAddr IpAddress, dDhcpRPoolRelayDestRowStatus RowStatus } dDhcpRPoolRelayDestPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a DHCP pool. The value must be same as an entry in dDhcpSPoolTable identified by dDhcpSPoolName." REFERENCE "dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB." ::= { dDhcpRPoolRelayDestEntry 1 } dDhcpRPoolRelayDestVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of virtual routing and forwarding(VRF). If this object is a zero length string, the destination DHCP server IP address is in global routing and forwarding space." ::= { dDhcpRPoolRelayDestEntry 2 } dDhcpRPoolRelayDestAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address of the relay destination for the pool." ::= { dDhcpRPoolRelayDestEntry 3 } dDhcpRPoolRelayDestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages this entry." ::= { dDhcpRPoolRelayDestEntry 99 } -- ----------------------------------------------------------------------------- dDhcpRPoolRelaySourceTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRPoolRelaySourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the configuration of the source subnet that the client packets come from." ::= { dDhcpRPoolObjects 3 } dDhcpRPoolRelaySourceEntry OBJECT-TYPE SYNTAX DDhcpRPoolRelaySourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry identifying a surce subnet that the client packets come from." INDEX { dDhcpRPoolRelaySourcePoolName, dDhcpRPoolRelaySourceSubnet, dDhcpRPoolRelaySourceSubnetMask } ::= { dDhcpRPoolRelaySourceTable 1 } DDhcpRPoolRelaySourceEntry ::= SEQUENCE { dDhcpRPoolRelaySourcePoolName DisplayString, dDhcpRPoolRelaySourceSubnet IpAddress, dDhcpRPoolRelaySourceSubnetMask IpAddress, dDhcpRPoolRelaySourceRowStatus RowStatus } dDhcpRPoolRelaySourcePoolName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a DHCP pool. The value must be same as an entry in dDhcpSPoolTable identified by dDhcpSPoolName." REFERENCE "dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB." ::= { dDhcpRPoolRelaySourceEntry 1 } dDhcpRPoolRelaySourceSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the source subnet of the client packets come from of the corresponding entry." ::= { dDhcpRPoolRelaySourceEntry 2 } dDhcpRPoolRelaySourceSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the network mask of the source subnet for the corresponding entry." ::= { dDhcpRPoolRelaySourceEntry 3 } dDhcpRPoolRelaySourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages this entry." ::= { dDhcpRPoolRelaySourceEntry 99} -- ----------------------------------------------------------------------------- dDhcpRelayIfObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 3 } dDhcpRIfIgnoreBootpTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRIfIgnoreBootpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about the BOOTP/DHCP relay will ignore BOOTP packet on an interface. An entry is created/removed when ignoring the BOOTP request packets is enabled or disabled on an interface via CLI or by issuing appropriate sets to this table using snmp. " ::= { dDhcpRelayIfObjects 1 } dDhcpRIfIgnoreBootpEntry OBJECT-TYPE SYNTAX DDhcpRIfIgnoreBootpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the dDhcpRelayAddrTable." INDEX { dDhcpRIfIgnoreBootpIfIndex } ::= { dDhcpRIfIgnoreBootpTable 1 } DDhcpRIfIgnoreBootpEntry ::= SEQUENCE { dDhcpRIfIgnoreBootpIfIndex InterfaceIndex, dDhcpRIfIgnoreBootpEnabled TruthValue } dDhcpRIfIgnoreBootpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces for this object." ::= { dDhcpRIfIgnoreBootpEntry 1 } dDhcpRIfIgnoreBootpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the interface ignore the bootp packet or not." ::= { dDhcpRIfIgnoreBootpEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRIfAgentInfoChkTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRIfAgentInfoChkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about the DHCP relay validates the relay agent information (option 82) in the received DHCP reply packet on an interface. An entry is created/removed when checking option 82 is or not configured on an interface via CLI or by issuing appropriate sets to this table using snmp. If checking option 82 is not configured for an interface, the global setting, dDhcpRelayAgentInfoCheckEnabled takes effect. If checking option 82 is configured for an interface, the interface setting takes effect." ::= { dDhcpRelayIfObjects 2 } dDhcpRIfAgentInfoChkEntry OBJECT-TYPE SYNTAX DDhcpRIfAgentInfoChkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the dDhcpRIfInfoChkTable." INDEX { dDhcpRIfAgentInfoChkIfIndex } ::= { dDhcpRIfAgentInfoChkTable 1 } DDhcpRIfAgentInfoChkEntry ::= SEQUENCE { dDhcpRIfAgentInfoChkIfIndex InterfaceIndex, dDhcpRIfAgentInfoChkState INTEGER } dDhcpRIfAgentInfoChkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces for this object." ::= { dDhcpRIfAgentInfoChkEntry 1 } dDhcpRIfAgentInfoChkState OBJECT-TYPE SYNTAX INTEGER{enabled(1), disabled(2), none(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the DHCP relay agent validates the relay agent information option in the received DHCP reply packet on the corresponding interface." ::= { dDhcpRIfAgentInfoChkEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRIfAgentInfoInsertTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRIfAgentInfoInsertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about whether insert option 82 for an interface during relay of DHCP request packets. An entry is created/removed when the insertion of option 82 is or not configured on an interface via CLI or by issuing appropriate sets to this table using snmp. If the insertion of option 82 is not configured for an interface, the global setting, dDhcpRelayAgentInfoInsertEnabled takes effect. If checking option 82 is configured for an interface, the interface setting takes effect." ::= { dDhcpRelayIfObjects 3 } dDhcpRIfAgentInfoInsertEntry OBJECT-TYPE SYNTAX DDhcpRIfAgentInfoInsertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the dDhcpRIfAgentInfoInsertTable." INDEX { dDhcpRIfAgentInfoInsertIfIndex } ::= { dDhcpRIfAgentInfoInsertTable 1 } DDhcpRIfAgentInfoInsertEntry ::= SEQUENCE { dDhcpRIfAgentInfoInsertIfIndex InterfaceIndex, dDhcpRIfAgentInfoInsertState INTEGER } dDhcpRIfAgentInfoInsertIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces for this object." ::= { dDhcpRIfAgentInfoInsertEntry 1 } dDhcpRIfAgentInfoInsertState OBJECT-TYPE SYNTAX INTEGER{enabled(1), disabled(2), none(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether insert option 82 for an interface during relay of DHCP request packets." ::= { dDhcpRIfAgentInfoInsertEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRIfAgentInfoPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRIfAgentInfoPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about relay agent information re-forwarding policy for the DHCP relay agent on an interface. An entry is created/removed when the re-forwarding policy is or not configured on an interface via CLI or by issuing appropriate sets to this table using snmp. If the re-forwarding policy is not configured for an interface, the global setting, dDhcpRelayAgentInfoPolicy takes effect. If re-forwarding policy is configured for an interface, the interface setting takes effect." ::= { dDhcpRelayIfObjects 4 } dDhcpRIfAgentInfoPolicyEntry OBJECT-TYPE SYNTAX DDhcpRIfAgentInfoPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the dDhcpRIfAgentInfoPolicyTable." INDEX { dDhcpRIfAgentInfoPolicyIfIndex } ::= { dDhcpRIfAgentInfoPolicyTable 1 } DDhcpRIfAgentInfoPolicyEntry ::= SEQUENCE { dDhcpRIfAgentInfoPolicyIfIndex InterfaceIndex, dDhcpRIfAgentInfoPolicyAction INTEGER } dDhcpRIfAgentInfoPolicyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces for this object." ::= { dDhcpRIfAgentInfoPolicyEntry 1 } dDhcpRIfAgentInfoPolicyAction OBJECT-TYPE SYNTAX INTEGER { drop(1), keep(2), replace(3), none(4)} MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the re-forwarding policy of DHCP relay agent information option 82 for the corresponding interface. drop (1) - discards the packet that already has the relay option. keep (2) - the DHCP requests packet that already has the relay option is left unchanged and directly relayed to the DHCP server. replace (3) - the DHCP requests packet that already has the relay option will be replaced by a new option. none (4) - not configure the policy action on the interface. " ::= { dDhcpRIfAgentInfoPolicyEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRIfAgentInfoTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRIfAgentInfoTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about the relay agent trusts the relay information on an interface. An entry is created/removed when the trusting relay information is enabled/disabled on an interface via CLI or by issuing appropriate sets to this table using snmp. If dDhcpRelayInfoTrustAll is 'true', the dhcp relay information is trusted for all interfaces. If dDhcpRelayInfoTrustAll is 'false', the trust state on an interface is determined whether the corresponding interface exists in this table. If exists, the corresponding interface is trusted, otherwise, the interface is not trusted. When relay information is trusted on an interface, the arriving packets with giaddr==0 (this relay agent is the first relay of this DHCP request packet) but with relay agent information option present will be accepted. If it is un-trusted, these packets will be dropped." ::= { dDhcpRelayIfObjects 5 } dDhcpRIfAgentInfoTrustEntry OBJECT-TYPE SYNTAX DDhcpRIfAgentInfoTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the dDhcpRIfAgentInfoTrustTable." INDEX { dDhcpRIfAgentInfoTrustIfIndex } ::= { dDhcpRIfAgentInfoTrustTable 1 } DDhcpRIfAgentInfoTrustEntry ::= SEQUENCE { dDhcpRIfAgentInfoTrustIfIndex InterfaceIndex, dDhcpRIfAgentInfoTrustEnabled TruthValue } dDhcpRIfAgentInfoTrustIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces for this object." ::= { dDhcpRIfAgentInfoTrustEntry 1 } dDhcpRIfAgentInfoTrustEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the interface is trusted on the not." ::= { dDhcpRIfAgentInfoTrustEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRelayPortIfOption82Objects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 4 } dDhcpRPortIfOp82RemIdTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRPortIfOp82RemIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the remote ID sub-option of Option 82 for physical port or port channel interface." ::={ dDhcpRelayPortIfOption82Objects 1} dDhcpRPortIfOp82RemIdEntry OBJECT-TYPE SYNTAX DDhcpRPortIfOp82RemIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in dDhcpRPortIfOption82RemIdTable containing the configuration about the remote ID sub-option of Option 82 for the corresponding interface." INDEX { dDhcpRPortIfOp82RemIdIfIndex } ::={ dDhcpRPortIfOp82RemIdTable 1 } DDhcpRPortIfOp82RemIdEntry ::= SEQUENCE{ dDhcpRPortIfOp82RemIdIfIndex InterfaceIndex, dDhcpRPortIfOp82RemIdVendor3Cfg DisplayString } dDhcpRPortIfOp82RemIdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the ifIndex value of the port or port channel. Only physical port and port channel interface will appear in this table." ::= { dDhcpRPortIfOp82RemIdEntry 1 } dDhcpRPortIfOp82RemIdVendor3Cfg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the per port/port channel user defined string as remote ID. This object is used when dDhcpROption82RemoteIdType is set to 'vendor3'." ::= { dDhcpRPortIfOp82RemIdEntry 2 } dDhcpRPortIfOp82CirIdTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpRPortIfOp82CirIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the circuit ID sub-option of Option 82 for physical port or port channel interface." ::={ dDhcpRelayPortIfOption82Objects 2} dDhcpRPortIfOp82CirIdEntry OBJECT-TYPE SYNTAX DDhcpRPortIfOp82CirIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in dDhcpRPortIfOp82CirIdTable containing the configuration about the circuit ID sub-option of Option 82 for the corresponding interface." INDEX { dDhcpRPortIfOp82CirIdIfIndex} ::={ dDhcpRPortIfOp82CirIdTable 1 } DDhcpRPortIfOp82CirIdEntry ::= SEQUENCE{ dDhcpRPortIfOp82CirIdIfIndex InterfaceIndex, dDhcpRPortIfOp82CirIdVendor3Cfg DisplayString } dDhcpRPortIfOp82CirIdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the ifIndex value of the port or port channel. Only physical port and port channel interface will appear in this table." ::= { dDhcpRPortIfOp82CirIdEntry 1 } dDhcpRPortIfOp82CirIdVendor3Cfg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the per port/port channel user defined string as circuit ID. This object is used when dDhcpROption82CircuitIdType is set to 'vendor3'." ::= { dDhcpRPortIfOp82CirIdEntry 2 } -- ----------------------------------------------------------------------------- dDhcpRelayVlanObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 5 } dDhcpRVlanLocalRelayCrlFirst2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the DHCP Local Relay enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay. " ::= { dDhcpRelayVlanObjects 1 } dDhcpRVlanLocalRelayCrlSecond2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the DHCP Local Relay enabled VLAN in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay. " ::= { dDhcpRelayVlanObjects 2 } -- ----------------------------------------------------------------------------- -- *************************************************************************** -- Conformance -- *************************************************************************** dDhcpRelayCompliances OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 1 } dDhcpRelayCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINK-DHCP-RELAY-IPV4-MIB." MODULE -- this module MANDATORY-GROUPS { dDhcpRGblCfgGroup, dDhcpRPoolCfgGroup, dDhcpRInterfaceGroup } GROUP dDhcpROp82SuboptionGroup DESCRIPTION "This group is required only for implementations that support sub-options configuration of option 82." GROUP dDhcpRVlanCfgGroup DESCRIPTION "This group is required only for implementations that support DHCP Local Relay for per VLAN." ::= { dDhcpRelayCompliances 1 } dDhcpRelayGroups OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 2 } dDhcpRGblCfgGroup OBJECT-GROUP OBJECTS { dDhcpRelayAgentInfoCheckEnabled, dDhcpRelayAgentInfoInsertEnabled, dDhcpRelayAgentInfoPolicy, dDhcpRelayInfoTrustAll, dDhcpRelaySmartRelay } STATUS current DESCRIPTION "A collection of objects providing global configuration about DHCP relay." ::= { dDhcpRelayGroups 1 } dDhcpRPoolCfgGroup OBJECT-GROUP OBJECTS { dDhcpRPoClRelayTargetRowStatus, dDhcpRPoolRelayDestRowStatus, dDhcpRPoolRelaySourceRowStatus } STATUS current DESCRIPTION "A collection of objects providing DHCP pool configuration." ::= { dDhcpRelayGroups 2 } dDhcpRInterfaceGroup OBJECT-GROUP OBJECTS { dDhcpRIfIgnoreBootpEnabled, dDhcpRIfAgentInfoChkState, dDhcpRIfAgentInfoInsertState, dDhcpRIfAgentInfoPolicyAction, dDhcpRIfAgentInfoTrustEnabled } STATUS current DESCRIPTION "A collection of objects providing per interface configuration of DHCP Relay." ::= { dDhcpRelayGroups 3 } dDhcpROp82SuboptionGroup OBJECT-GROUP OBJECTS { dDhcpROption82RemoteIdType, dDhcpROption82RemoteIdUserDef, dDhcpROption82CircuitIdType, dDhcpROption82CircuitIdUserDef, dDhcpRPortIfOp82RemIdVendor3Cfg, dDhcpRPortIfOp82CirIdVendor3Cfg } STATUS current DESCRIPTION "A collection of objects providing sub-options configuration of option 82." ::= { dDhcpRelayGroups 4 } dDhcpRVlanCfgGroup OBJECT-GROUP OBJECTS { dDhcpRVlanLocalRelayCrlFirst2K, dDhcpRVlanLocalRelayCrlSecond2K } STATUS current DESCRIPTION "A collection of objects which are used to configure as well as show information regarding the feature enabling on each VLAN." ::= { dDhcpRelayGroups 5 } END