-- ***************************************************************** -- DLINKSW-DHCP-SERVER-MIB.mib : DHCP Server MIB -- -- Copyright (c) 2013 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKSW-DHCP-SERVER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE,IpAddress,Unsigned32,Counter64 FROM SNMPv2-SMI RowStatus,MacAddress,TruthValue,DateAndTime,DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; dlinkSwDhcpServerMIB MODULE-IDENTITY LAST-UPDATED "201309030000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "The MIB module for managing DHCP Server." REVISION "201309030000Z" DESCRIPTION "Initial version of this MIB." ::= { dlinkIndustrialCommon 39 } -- ----------------------------------------------------------------------------- dDhcpServerMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwDhcpServerMIB 0 } dDhcpServerMIBObjects OBJECT IDENTIFIER ::= { dlinkSwDhcpServerMIB 1 } dDhcpServerMIBConformance OBJECT IDENTIFIER ::= { dlinkSwDhcpServerMIB 2 } -- ----------------------------------------------------------------------------- dDhcpServerGblCfg OBJECT IDENTIFIER ::= { dDhcpServerMIBObjects 1} dDhcpServiceEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables the DHCP server and relay service on the device." DEFVAL { false } ::= { dDhcpServerGblCfg 1 } dDhcpServerPingPktNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of PING packets the DHCP server sends to an IP address before assigning this address to a requesting client. Setting this object to 0 will disable the PING operation." DEFVAL { 2 } ::= { dDhcpServerGblCfg 2 } dDhcpServerPingTimeOut OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the amount of time in millisecond the DHCP server must wait before timing out a ping packet. The specified value should be multiple of 100." DEFVAL { 500 } ::= { dDhcpServerGblCfg 3 } dDhcpSExcludedAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSExcludedAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configurations about a range of IP addresses that the DHCP server should not assign to DHCP client." ::= { dDhcpServerGblCfg 4 } dDhcpSExcludedAddressEntry OBJECT-TYPE SYNTAX DDhcpSExcludedAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning information about an IP address range that the DHCP server should not assign to DHCP client." INDEX { dDhcpSExcludedAddressVrfName, dDhcpSExcludedAddressBeginAddr, dDhcpSExcludedAddressEndAddr } ::= { dDhcpSExcludedAddressTable 1 } DDhcpSExcludedAddressEntry ::= SEQUENCE { dDhcpSExcludedAddressVrfName DisplayString, dDhcpSExcludedAddressBeginAddr IpAddress, dDhcpSExcludedAddressEndAddr IpAddress, dDhcpSExcludedAddressRowStatus RowStatus } dDhcpSExcludedAddressVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of virtual routing and forwarding (VRF). When the VRF is not specified (zero length string), the corresponding configuration is used for global address space." DEFVAL { "" } ::= { dDhcpSExcludedAddressEntry 1 } dDhcpSExcludedAddressBeginAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first address of this address range." ::= { dDhcpSExcludedAddressEntry 2 } dDhcpSExcludedAddressEndAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The last address of this address range." ::= { dDhcpSExcludedAddressEntry 3 } dDhcpSExcludedAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSExcludedAddressEntry 99 } -- ----------------------------------------------------------------------------- dDhcpServerClass OBJECT IDENTIFIER ::= { dDhcpServerMIBObjects 2 } dDhcpServerUseClassEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables the DHCP server to use DHCP classes during address allocation or use DHCP classes option to locate the addresses." ::= { dDhcpServerClass 1 } dDhcpSClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of classes for DHCP server. This table is used to create and delete DHCP class." ::= { dDhcpServerClass 2 } dDhcpSClassEntry OBJECT-TYPE SYNTAX DDhcpSClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in DHCP class table contaning objects for creating or deleting a class for the DHCP server or relay." INDEX { dDhcpSClassName } ::= { dDhcpSClassTable 1 } DDhcpSClassEntry ::= SEQUENCE { dDhcpSClassName DisplayString, dDhcpSClassRowStatus RowStatus } dDhcpSClassName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the class name of the corresponding entry." ::= { dDhcpSClassEntry 1 } dDhcpSClassRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create new rows in this table and to delete existing rows." ::= { dDhcpSClassEntry 99 } -- ----------------------------------------------------------------------------- dDhcpSClassOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSClassOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DHCP option configuratoins for DHCP Relay and Server classes." ::= { dDhcpServerClass 3 } dDhcpSClassOptionEntry OBJECT-TYPE SYNTAX DDhcpSClassOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains a DHCP option configuration of a DHCP class." INDEX { dDhcpSClassName, dDhcpSClassOptionCode, dDhcpSClassOptionPatternValue, dDhcpSClassOptionWildcardMatch, dDhcpSClassOptionMaskValue } ::= { dDhcpSClassOptionTable 1 } DDhcpSClassOptionEntry ::= SEQUENCE { dDhcpSClassOptionCode INTEGER, dDhcpSClassOptionPatternValue OCTET STRING, dDhcpSClassOptionWildcardMatch TruthValue, dDhcpSClassOptionMaskValue OCTET STRING, dDhcpSClassOptionRowStatus RowStatus } dDhcpSClassOptionCode OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DHCP option code. The list of supported option code is project dependent. The following are some common used option codes: 60: vendor class identifier; 61: Client identifier; 77: user class; 82: Relay agent information option; 124: vendor-identifying vendor class; 125: vendor-identifying vendor-specific information." ::= { dDhcpSClassOptionEntry 1 } dDhcpSClassOptionPatternValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the pattern of the corresponding DHCP option. Multiple option patterns can be specified for a DHCP class." ::= { dDhcpSClassOptionEntry 2 } dDhcpSClassOptionWildcardMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates whether matching the remaining bits of the option. A value of 'false' means the bit length of dDhcpSClassOptionPatternValue should be the same as bit length of the option." ::= { dDhcpSClassOptionEntry 3 } dDhcpSClassOptionMaskValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the hex bit mask for masking of the dDhcpSClassOptionPatternValue. The masked pattern bits will be matched. The masked pattern of every octet only supports: '00'H - indicates the corresponding octet will not be checked. 'FF'H - indicates the corresponding input octet must be same as the value of dDhcpSClassOptionPatternValue. If this object is a zero length string means the mask is not specified, all octets specified by dDhcpSClassOptionPatternValue will be checked. " ::= { dDhcpSClassOptionEntry 4 } dDhcpSClassOptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSClassOptionEntry 99 } -- ----------------------------------------------------------------------------- dDhcpServerPoolMgmt OBJECT IDENTIFIER ::= { dDhcpServerMIBObjects 3 } dDhcpSPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and delete DHCP pool." ::= { dDhcpServerPoolMgmt 1 } dDhcpSPoolEntry OBJECT-TYPE SYNTAX DDhcpSPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in DHCP Pool table contaning objects for creating or deleting a global pool for the DHCP server or relay." INDEX { dDhcpSPoolName } ::= { dDhcpSPoolTable 1 } DDhcpSPoolEntry ::= SEQUENCE { dDhcpSPoolName DisplayString, dDhcpSPoolRowStatus RowStatus } dDhcpSPoolName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the DHCP pool name of the corresponding entry." ::= { dDhcpSPoolEntry 1 } dDhcpSPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create new rows in this table and to delete existing rows." ::= { dDhcpSPoolEntry 99 } -- ----------------------------------------------------------------------------- dDhcpSPoolCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DHCP server pool informations." ::= { dDhcpServerPoolMgmt 2 } dDhcpSPoolCfgEntry OBJECT-TYPE SYNTAX DDhcpSPoolCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning DHCP server pool information." INDEX { dDhcpSPoolName } ::= { dDhcpSPoolCfgTable 1 } DDhcpSPoolCfgEntry ::= SEQUENCE { dDhcpSPoolCfgDomainName DisplayString, dDhcpSPoolCfgNetBIOSNodeType INTEGER, dDhcpSPoolCfgLeaseState INTEGER, dDhcpSPoolCfgLeaseDay INTEGER, dDhcpSPoolCfgLeaseHour INTEGER, dDhcpSPoolCfgLeaseMinute INTEGER, dDhcpSPoolCfgBootFile DisplayString, dDhcpSPoolCfgNextServer IpAddress, dDhcpSPoolCfgVrfName DisplayString } dDhcpSPoolCfgDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The domain name for the client if the server allocates the address for the client from this pool." DEFVAL { "" } ::= { dDhcpSPoolCfgEntry 1 } dDhcpSPoolCfgNetBIOSNodeType OBJECT-TYPE SYNTAX INTEGER { notSpecified(0), broadcast(1), peertopeer(2), mixed(3), hybid(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The NetBIOS node type for a Microsoft DHCP client. The value 'notSpecified' indicates NetBIOS node type is not configured for the corresponding entry." DEFVAL { notSpecified } ::= { dDhcpSPoolCfgEntry 2 } dDhcpSPoolCfgLeaseState OBJECT-TYPE SYNTAX INTEGER{ predefined(1), infinite(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The pool lease state. When configured to 'infinite', the following objects: dDhcpSPoolCfgLeaseDay, dDhcpSPoolCfgLeaseHour and dDhcpSPoolCfgLeaseMinute will be reverted to default value and not be used for lease time." DEFVAL { predefined } ::= { dDhcpSPoolCfgEntry 3 } dDhcpSPoolCfgLeaseDay OBJECT-TYPE SYNTAX INTEGER(0..365) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of days for the duration of lease." DEFVAL { 1 } ::= { dDhcpSPoolCfgEntry 4 } dDhcpSPoolCfgLeaseHour OBJECT-TYPE SYNTAX INTEGER(0..23) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of hours for the duration of lease." DEFVAL { 0 } ::= { dDhcpSPoolCfgEntry 5 } dDhcpSPoolCfgLeaseMinute OBJECT-TYPE SYNTAX INTEGER(0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of minutes for the duration of lease." DEFVAL { 0 } ::= { dDhcpSPoolCfgEntry 6 } dDhcpSPoolCfgBootFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the file that is used as a boot image." DEFVAL { "" } ::= { dDhcpSPoolCfgEntry 7 } dDhcpSPoolCfgNextServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the next server to be used in the DHCP client boot process. The server is typically a TFTP server. A length of zero indicates the next server is unspecified." DEFVAL { ''H } ::= { dDhcpSPoolCfgEntry 8 } dDhcpSPoolCfgVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the VRF for DHCP pool. The zero length string means the VRF name is not specified." DEFVAL { "" } ::= { dDhcpSPoolCfgEntry 9 } -- ----------------------------------------------------------------------------- dDhcpSPoolAddrAllocTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolAddrAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information indicates the address allocation for DHCP server." ::= { dDhcpServerPoolMgmt 3 } dDhcpSPoolAddrAllocEntry OBJECT-TYPE SYNTAX DDhcpSPoolAddrAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning the network configuration for DHCP pool." INDEX { dDhcpSPoolName, dDhcpSPoolAddrAllocNetwork } ::= { dDhcpSPoolAddrAllocTable 1 } DDhcpSPoolAddrAllocEntry ::= SEQUENCE { dDhcpSPoolAddrAllocNetwork IpAddress, dDhcpSPoolAddrAllocNetworkMask IpAddress, dDhcpSPoolAddrAllocRowStatus RowStatus } dDhcpSPoolAddrAllocNetwork OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The network address of the corresponding entry. The number of network configuration can be supported in a pool is project dependent." ::= { dDhcpSPoolAddrAllocEntry 1 } dDhcpSPoolAddrAllocNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The network address mask of the corresponding entry." ::= { dDhcpSPoolAddrAllocEntry 2 } dDhcpSPoolAddrAllocRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolAddrAllocEntry 99} -- ----------------------------------------------------------------------------- dDhcpSPoolManualBindTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolManualBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information indicates the manual binding information for DHCP pool." ::= { dDhcpServerPoolMgmt 4 } dDhcpSPoolManualBindEntry OBJECT-TYPE SYNTAX DDhcpSPoolManualBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning the manual binding information for DHCP pool." INDEX { dDhcpSPoolName } ::= { dDhcpSPoolManualBindTable 1 } DDhcpSPoolManualBindEntry ::= SEQUENCE { dDhcpSPoolManualBindHostIp IpAddress, dDhcpSPoolManualBindHostIpMask IpAddress, dDhcpSPoolManualBindHAddr MacAddress, dDhcpSPoolManualBindClientId OCTET STRING, dDhcpSPoolManualBindRowStatus RowStatus } dDhcpSPoolManualBindHostIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP address of the manual binding entry in a DHCP address pool. The user cannot configure the manual binding entry in the address pool that has been configured with network." ::= { dDhcpSPoolManualBindEntry 1 } dDhcpSPoolManualBindHostIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the mask the network part of the host address." ::= { dDhcpSPoolManualBindEntry 2 } dDhcpSPoolManualBindHAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the hardware address of the manual binding entry in a DHCP address pool." ::= { dDhcpSPoolManualBindEntry 3 } dDhcpSPoolManualBindClientId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates DHCP client ID of the manual binding entry in a DHCP address pool." ::= { dDhcpSPoolManualBindEntry 4 } dDhcpSPoolManualBindRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolManualBindEntry 99} -- ----------------------------------------------------------------------------- dDhcpSPoolClassAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolClassAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains address range configuration of a DHCP pool class." ::= { dDhcpServerPoolMgmt 5 } dDhcpSPoolClassAddrEntry OBJECT-TYPE SYNTAX DDhcpSPoolClassAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "By using DHCP class, DHCP server using option configuration to further determine which IP addresses to allocate to clients. The first two index elements identify the pool class to which this address range belongs. " INDEX { dDhcpSPoolName, dDhcpSClassName, dDhcpSPoolClassAddrBeginAddr, dDhcpSPoolClassAddrEndAddr } ::= { dDhcpSPoolClassAddrTable 1 } DDhcpSPoolClassAddrEntry ::= SEQUENCE { dDhcpSPoolClassAddrBeginAddr IpAddress, dDhcpSPoolClassAddrEndAddr IpAddress, dDhcpSPoolClassAddrRowStatus RowStatus } dDhcpSPoolClassAddrBeginAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The start address of this class address range. A special address 0.0.0.0 indicates there is no address range is configured for this pool class. When a valid address range is configured, the entry of 0.0.0.0 will be removed. " ::= { dDhcpSPoolClassAddrEntry 1 } dDhcpSPoolClassAddrEndAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The end address of this class address range." ::= { dDhcpSPoolClassAddrEntry 2 } dDhcpSPoolClassAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolClassAddrEntry 99} -- ----------------------------------------------------------------------------- dDhcpSPoolOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of option configurations for DHCP pools." ::= { dDhcpServerPoolMgmt 6 } dDhcpSPoolOptionEntry OBJECT-TYPE SYNTAX DDhcpSPoolOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning a DHCP option configuration of a DHCP class." INDEX { dDhcpSPoolName, dDhcpSPoolOptionCode } ::= { dDhcpSPoolOptionTable 1 } DDhcpSPoolOptionEntry ::= SEQUENCE { dDhcpSPoolOptionCode INTEGER, dDhcpSPoolOptionType INTEGER, dDhcpSPoolOptionValue DisplayString, dDhcpSPoolOptionRowStatus RowStatus } dDhcpSPoolOptionCode OBJECT-TYPE SYNTAX INTEGER (2..254) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the code of DHCP option. Some options can be configured by other objects (e.g. option 1 which is used to configure Subnet Mask can be configured by dDhcpSPoolAddrAllocEntry and then should not be configured by this object." ::= { dDhcpSPoolOptionEntry 1 } dDhcpSPoolOptionType OBJECT-TYPE SYNTAX INTEGER { string(1), hex(2), ip(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of dDhcpSPoolOptionValue. string(1): The type of option value is character string. hex(2) : The type of option value is hexadecimal string. ip(3) : The type of option value is IP list." ::= { dDhcpSPoolOptionEntry 2 } dDhcpSPoolOptionValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of the corresponding DHCP option." ::= { dDhcpSPoolOptionEntry 3 } dDhcpSPoolOptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolOptionEntry 99 } -- ----------------------------------------------------------------------------- dDhcpSPoolDefaultRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of default router IP configuration for DHCP client." ::= { dDhcpServerPoolMgmt 7 } dDhcpSPoolDefaultRouterEntry OBJECT-TYPE SYNTAX DDhcpSPoolDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contaning default router configuration." INDEX { dDhcpSPoolName, dDhcpSPoolDefaultRouterIndex } ::= { dDhcpSPoolDefaultRouterTable 1 } DDhcpSPoolDefaultRouterEntry ::= SEQUENCE { dDhcpSPoolDefaultRouterIndex Unsigned32, dDhcpSPoolDefaultRouterAddr IpAddress, dDhcpSPoolDefaultRouterRowStatus RowStatus } dDhcpSPoolDefaultRouterIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The default router index." ::= { dDhcpSPoolDefaultRouterEntry 1 } dDhcpSPoolDefaultRouterAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the default router." ::= { dDhcpSPoolDefaultRouterEntry 2 } dDhcpSPoolDefaultRouterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolDefaultRouterEntry 99} -- ----------------------------------------------------------------------------- dDhcpSPoolDnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DNS server configurations." ::= { dDhcpServerPoolMgmt 8 } dDhcpSPoolDnsServerEntry OBJECT-TYPE SYNTAX DDhcpSPoolDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing DNS server configuration for DHCP pool." INDEX { dDhcpSPoolName, dDhcpSPoolDnsServerIndex } ::= { dDhcpSPoolDnsServerTable 1 } DDhcpSPoolDnsServerEntry ::= SEQUENCE { dDhcpSPoolDnsServerIndex Unsigned32, dDhcpSPoolDnsServerAddr IpAddress, dDhcpSPoolDnsServerRowStatus RowStatus } dDhcpSPoolDnsServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DNS server index." ::= { dDhcpSPoolDnsServerEntry 1 } dDhcpSPoolDnsServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the DNS server." ::= { dDhcpSPoolDnsServerEntry 2 } dDhcpSPoolDnsServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolDnsServerEntry 99} -- ----------------------------------------------------------------------------- dDhcpSPoolWinsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSPoolWinsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of WINS (Windows Internet Name Service) server configurations." ::= { dDhcpServerPoolMgmt 9 } dDhcpSPoolWinsServerEntry OBJECT-TYPE SYNTAX DDhcpSPoolWinsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing WINS server configuration." INDEX { dDhcpSPoolName, dDhcpSPoolWinsServerIndex } ::= { dDhcpSPoolWinsServerTable 1 } DDhcpSPoolWinsServerEntry ::= SEQUENCE { dDhcpSPoolWinsServerIndex Unsigned32, dDhcpSPoolWinsServerAddr IpAddress, dDhcpSPoolWinsServerRowStatus RowStatus } dDhcpSPoolWinsServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this WINS server." ::= { dDhcpSPoolWinsServerEntry 1 } dDhcpSPoolWinsServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the WINS server." ::= { dDhcpSPoolWinsServerEntry 2 } dDhcpSPoolWinsServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dDhcpSPoolWinsServerEntry 99} -- ----------------------------------------------------------------------------- dDhcpServerInfo OBJECT IDENTIFIER ::= { dDhcpServerMIBObjects 4} dDhcpServerPktStatistics OBJECT IDENTIFIER ::= { dDhcpServerInfo 1 } dDhcpServerClearStatistics OBJECT-TYPE SYNTAX INTEGER{ clear(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to reset all DHCP server counters when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned." DEFVAL { noOp } ::= { dDhcpServerPktStatistics 1 } dDhcpServerRecvBootRequest OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received BootRequest packets." ::= { dDhcpServerPktStatistics 2 } dDhcpServerRecvMalformedPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received malformed packets." ::= { dDhcpServerPktStatistics 3 } dDhcpServerRecvRenewPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received packets used to extend leases." ::= { dDhcpServerPktStatistics 4 } dDhcpServerRecvDiscover OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received DHCPDISCOVER packets." ::= { dDhcpServerPktStatistics 5 } dDhcpServerRecvRequest OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received DHCPREQUEST packets." ::= { dDhcpServerPktStatistics 6 } dDhcpServerRecvDecline OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received DHCPDECLINE packets." ::= { dDhcpServerPktStatistics 7 } dDhcpServerRecvRelease OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received DHCPRELEASE packets." ::= { dDhcpServerPktStatistics 8 } dDhcpServerRecvInform OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received DHCPRINFORM packets." ::= { dDhcpServerPktStatistics 9 } dDhcpServerSendBootReply OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sent BootReply packets." ::= { dDhcpServerPktStatistics 10 } dDhcpServerSendOffer OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sent DHCPOFFER packets." ::= { dDhcpServerPktStatistics 11 } dDhcpServerSendAck OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sent DHCPACK packets." ::= { dDhcpServerPktStatistics 12 } dDhcpServerSendNak OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sent DHCPNAK packets." ::= { dDhcpServerPktStatistics 13 } -- ----------------------------------------------------------------------------- dDhcpServerBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpServerBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information regarding binding information of a pool of IP addresses." ::= { dDhcpServerInfo 2 } dDhcpServerBindingEntry OBJECT-TYPE SYNTAX DDhcpServerBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An address binding entry." INDEX { dDhcpSPoolName, dDhcpServerBindingVrfName, dDhcpServerBindingIpAddress } ::= { dDhcpServerBindingTable 1 } DDhcpServerBindingEntry ::= SEQUENCE { dDhcpServerBindingVrfName DisplayString, dDhcpServerBindingIpAddress IpAddress, dDhcpSBindingHwAddrOrClientId OCTET STRING, dDhcpServerBindingState INTEGER, dDhcpServerBindingLeaseExpire DateAndTime, dDhcpServerBindingClear INTEGER } dDhcpServerBindingVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of virtual routing and forwarding(VRF). If this object is a zero length string, the corresponding entry is for global routing and forwarding space." ::= { dDhcpServerBindingEntry 1 } dDhcpServerBindingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address which has been assigned to a specified client." ::= { dDhcpServerBindingEntry 2 } dDhcpSBindingHwAddrOrClientId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the hardware address or client identifier of the DHCP client. The first octet of this object contains the hardware type of the DHCP client. The remaining octets contain the hardware address of the client. If the first octet is 0 (zero) indicates the remaining octets contain other than a hardware address. For more information about the client identifier, please see RFC 2132, DHCP Options and BOOTP Vendor Extensions, section 9.14." ::= { dDhcpServerBindingEntry 3 } dDhcpServerBindingState OBJECT-TYPE SYNTAX INTEGER { manual(1), automatic(2), offering(3), bootp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this binding." ::= { dDhcpServerBindingEntry 4 } dDhcpServerBindingLeaseExpire OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the expiration of the lease expiration time of the binding entry. The special value of all '00'Hs indicates that the lease will never be expired (infinite)." ::= { dDhcpServerBindingEntry 5 } dDhcpServerBindingClear OBJECT-TYPE SYNTAX INTEGER { noOp(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear this entry. No action is taken if this object is set to 'noOp'. The value of this object when read is always 'noOp'." ::= { dDhcpServerBindingEntry 6 } -- ----------------------------------------------------------------------------- dDhcpSConflictIpTable OBJECT-TYPE SYNTAX SEQUENCE OF DDhcpSConflictIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of conflict IP addresses while DHCP Server attempts to assign the IP address to client." ::= { dDhcpServerInfo 3 } dDhcpSConflictIpEntry OBJECT-TYPE SYNTAX DDhcpSConflictIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP address conflict means a duplication of use of the same IP address by two hosts." INDEX { dDhcpSPoolName, dDhcpSConflictIpVrfName, dDhcpSConflictIpAddr } ::= { dDhcpSConflictIpTable 1 } DDhcpSConflictIpEntry ::= SEQUENCE { dDhcpSConflictIpVrfName DisplayString, dDhcpSConflictIpAddr IpAddress, dDhcpSConflictIpDetectMethod INTEGER, dDhcpSConflictIpDetectTime DateAndTime, dDhcpSConflictIpClear INTEGER } dDhcpSConflictIpVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of virtual routing and forwarding (VRF). If this object is zero length string, the corresponding entry is for global routing and forwarding space." ::= { dDhcpSConflictIpEntry 1 } dDhcpSConflictIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the IP address which is duplicated and used by more than one host." ::= { dDhcpSConflictIpEntry 2 } dDhcpSConflictIpDetectMethod OBJECT-TYPE SYNTAX INTEGER { ping(1), gratuitousArp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The server detects conflicts using ping. The client detects conflicts using gratuitous Address Resolution Protocol (ARP)." ::= { dDhcpSConflictIpEntry 3 } dDhcpSConflictIpDetectTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which a DHCP address conflict detected." ::= { dDhcpSConflictIpEntry 4 } dDhcpSConflictIpClear OBJECT-TYPE SYNTAX INTEGER { noOp(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear this entry. No action is taken if this object is set to 'noOp'. The value of this object when read is always 'noOp'." ::= { dDhcpSConflictIpEntry 5 } -- *************************************************************************** -- Conformance -- *************************************************************************** dDhcpServerCompliances OBJECT IDENTIFIER ::= { dDhcpServerMIBConformance 1 } dDhcpServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKSW-DHCP-SERVER-MIB." MODULE -- this module MANDATORY-GROUPS { dDhcpSGblCfgGroup, dDhcpSClassGroup, dDhcpSClassCfgGroup, dDhcpSPoolGroup, dDhcpSPoolCfgGroup, dDhcpSPoolNetworkCfgGroup, dDhcpSPoolManualBindingGroup, dDhcpSStatisticsGroup, dDhcpSGeneralInfoGroup } OBJECT dDhcpSPoolCfgVrfName MIN-ACCESS read-only DESCRIPTION "Create/Write access is required only if the agent supports virtual routing and forwarding(VRF)." ::= { dDhcpServerCompliances 1 } dDhcpServerGroups OBJECT IDENTIFIER ::= { dDhcpServerMIBConformance 2 } dDhcpSGblCfgGroup OBJECT-GROUP OBJECTS { dDhcpServiceEnabled, dDhcpServerPingTimeOut, dDhcpServerPingPktNumber, dDhcpSExcludedAddressRowStatus } STATUS current DESCRIPTION "A collection of objects providing global configuration about DHCP server." ::= { dDhcpServerGroups 1 } dDhcpSClassGroup OBJECT-GROUP OBJECTS { dDhcpServerUseClassEnabled, dDhcpSClassRowStatus } STATUS current DESCRIPTION "A collection of objects providing DHCP class configuration." ::= { dDhcpServerGroups 2 } dDhcpSClassCfgGroup OBJECT-GROUP OBJECTS { dDhcpSClassOptionRowStatus, dDhcpSPoolClassAddrRowStatus } STATUS current DESCRIPTION "A collection of objects providing DHCP relay agent configuration of a class or address range of a class under a DHCP pool." ::= { dDhcpServerGroups 3 } dDhcpSPoolGroup OBJECT-GROUP OBJECTS { dDhcpSPoolRowStatus } STATUS current DESCRIPTION "This group is used to create/delete DHCP pools." ::= { dDhcpServerGroups 4 } dDhcpSPoolCfgGroup OBJECT-GROUP OBJECTS { dDhcpSPoolCfgDomainName, dDhcpSPoolCfgNetBIOSNodeType, dDhcpSPoolCfgLeaseState, dDhcpSPoolCfgLeaseDay, dDhcpSPoolCfgLeaseHour, dDhcpSPoolCfgLeaseMinute, dDhcpSPoolCfgBootFile, dDhcpSPoolCfgNextServer, dDhcpSPoolCfgVrfName, dDhcpSPoolOptionType, dDhcpSPoolOptionValue, dDhcpSPoolOptionRowStatus, dDhcpSPoolDefaultRouterAddr, dDhcpSPoolDefaultRouterRowStatus, dDhcpSPoolDnsServerAddr, dDhcpSPoolDnsServerRowStatus, dDhcpSPoolWinsServerAddr, dDhcpSPoolWinsServerRowStatus } STATUS current DESCRIPTION "A collection of objects providing DHCP pool configuration." ::= { dDhcpServerGroups 5 } dDhcpSPoolNetworkCfgGroup OBJECT-GROUP OBJECTS { dDhcpSPoolAddrAllocNetworkMask, dDhcpSPoolAddrAllocRowStatus } STATUS current DESCRIPTION "A collection of objects providing network configuration for DHCP pools." ::= { dDhcpServerGroups 6 } dDhcpSPoolManualBindingGroup OBJECT-GROUP OBJECTS { dDhcpSPoolManualBindHostIp, dDhcpSPoolManualBindHostIpMask, dDhcpSPoolManualBindHAddr, dDhcpSPoolManualBindClientId, dDhcpSPoolManualBindRowStatus } STATUS current DESCRIPTION "A collection of objects providing manual binding configuration for DHCP pools." ::= { dDhcpServerGroups 7 } dDhcpSStatisticsGroup OBJECT-GROUP OBJECTS { dDhcpServerClearStatistics, dDhcpServerRecvBootRequest, dDhcpServerRecvMalformedPkt, dDhcpServerRecvRenewPkt, dDhcpServerRecvDiscover, dDhcpServerRecvRequest, dDhcpServerRecvDecline, dDhcpServerRecvRelease, dDhcpServerRecvInform, dDhcpServerSendBootReply, dDhcpServerSendOffer, dDhcpServerSendAck, dDhcpServerSendNak } STATUS current DESCRIPTION "A collection of objects for management of DHCP statistics." ::= { dDhcpServerGroups 8 } dDhcpSGeneralInfoGroup OBJECT-GROUP OBJECTS { dDhcpSBindingHwAddrOrClientId, dDhcpServerBindingState, dDhcpServerBindingLeaseExpire, dDhcpServerBindingClear, dDhcpSConflictIpDetectMethod, dDhcpSConflictIpDetectTime, dDhcpSConflictIpClear } STATUS current DESCRIPTION "A collection of objects providing general DHCP information, e.g binding database, conflict IP address." ::= { dDhcpServerGroups 9 } END