-- ***************************************************************** -- DLINKSW-ERROR-DISABLE-MIB.mib : Error Disable MIB -- -- Copyright (c) 2013 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKSW-ERROR-DISABLE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB VlanId, VlanIdOrNone FROM Q-BRIDGE-MIB dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; dlinkSwErrDisableMIB MODULE-IDENTITY LAST-UPDATED "201307080000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "This MIB module defines objects for error disabled." REVISION "201305020000Z" DESCRIPTION "This is the first version of the MIB file." REVISION "201307080000Z" DESCRIPTION "Modified the object dErrDisIfStatusDisReason to dErrDisIfStatusDisReasonIndex, make this object to be the third index of dErrDisIfStatusEntry, to display more than one reason on a port or vlan interface if more than one reason is recocovering on the port or vlan interface." REVISION "201404110000Z" DESCRIPTION "Add scheduledShutdown and scheduledHibernation into DErrDisReasonID. Modify description of dErrDisIfStatusTimeLeft, using 0xFFFFFFFF to indicates no automatic recovery." ::= { dlinkIndustrialCommon 45 } -- -- Textual conventions -- DErrDisReasonID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving " SYNTAX INTEGER { loopbackDetect(1), l2ptGuard(2), psecureViolation(3), stormControl(4), bpduProtect(5), arpRateLimit(6), dhcpRateLimit(7), ddm(8), scheduledShutdown(9), scheduledHibernation(10) } -- ----------------------------------------------------------------------------- dErrDisableMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwErrDisableMIB 0 } dErrDisableMIBObjects OBJECT IDENTIFIER ::= { dlinkSwErrDisableMIB 1 } dErrDisableMIBConformance OBJECT IDENTIFIER ::= { dlinkSwErrDisableMIB 2 } -- ----------------------------------------------------------------------------- dErrDisRecoveryTable OBJECT-TYPE SYNTAX SEQUENCE OF DErrDisRecoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the recovery mechanism for the features with error-disable functionality. Transceiver monitoring module (the DErrDisReasonID is 'ddm') can also put a SFP port which is in abnormal status in error disabled state. This error disable cannot be auto recovered but can only be manually recovered. As a result, there is no entry for error cause is 'ddm' in this table. " ::= { dErrDisableMIBObjects 1 } dErrDisRecoveryEntry OBJECT-TYPE SYNTAX DErrDisRecoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is created for each feature which has error-disable functionality." INDEX { dErrDisRecoveryIndex } ::= { dErrDisRecoveryTable 1 } DErrDisRecoveryEntry ::= SEQUENCE { dErrDisRecoveryIndex DErrDisReasonID, dErrDisRecoveryEnable TruthValue, dErrDisRecoveryInterval Integer32 } dErrDisRecoveryIndex OBJECT-TYPE SYNTAX DErrDisReasonID MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the cause of error-disable." ::= { dErrDisRecoveryEntry 1 } dErrDisRecoveryEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the system can automatically recover a system entity that has been disabled by the cause." DEFVAL { false } ::= { dErrDisRecoveryEntry 2 } dErrDisRecoveryInterval OBJECT-TYPE SYNTAX Integer32 (5..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation." DEFVAL { 300 } ::= { dErrDisRecoveryEntry 3 } -- ----------------------------------------------------------------------------- dErrDisIfStatusTableNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of entries present in the dErrDisIfStatusTable." ::= { dErrDisableMIBObjects 2 } dErrDisIfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DErrDisIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides next recovery timeout information about an interface disabled by a feature." ::= { dErrDisableMIBObjects 3 } dErrDisIfStatusEntry OBJECT-TYPE SYNTAX DErrDisIfStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry indicates next recovery timeout information about an interface or (interface, vlan) disabled by a feature." INDEX { dErrDisIfStatusIfIndex, dErrDisIfStatusVlanIndex, dErrDisIfStatusDisReasonIndex } ::= { dErrDisIfStatusTable 1 } DErrDisIfStatusEntry ::= SEQUENCE { dErrDisIfStatusIfIndex InterfaceIndex, dErrDisIfStatusVlanIndex VlanIdOrNone, dErrDisIfStatusDisReasonIndex DErrDisReasonID, dErrDisIfStatusTimeLeft Unsigned32 } dErrDisIfStatusIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the interface index of the interface disabled by a feature." ::= { dErrDisIfStatusEntry 1 } dErrDisIfStatusVlanIndex OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the VLAN in the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object is 0." ::= { dErrDisIfStatusEntry 2 } dErrDisIfStatusDisReasonIndex OBJECT-TYPE SYNTAX DErrDisReasonID MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the reason which cause the interface disabled." ::= { dErrDisIfStatusEntry 3 } dErrDisIfStatusTimeLeft OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time left that the interface will be automatically recovered. Value 0xFFFFFFFF indicates the interface won't be automatically recovered." ::= { dErrDisIfStatusEntry 4 } -- ----------------------------------------------------------------------------- dErrDisNotificationEnable OBJECT-TYPE SYNTAX BITS { errDisableAsserted(0), errDisableCleared(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. errDisableAsserted(0) - Controls the notifications for a port/vlan entering into error disabled state. errDisableCleared(1) - Controls the notifications for a port/vlan exiting from error disabled state. " ::= { dErrDisableMIBObjects 4 } dErrDisNotifRate OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "notifications per minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A value of 0 indicates that an SNMP Notification is generated for every error disabled event." DEFVAL { 0 } ::= { dErrDisableMIBObjects 5 } -- ----------------------------------------------------------------------------- dErrDisNotifyInfo OBJECT IDENTIFIER ::= { dErrDisableMIBObjects 6 } dErrDisNotifyInfoPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the port number of error disabled port." ::= { dErrDisNotifyInfo 1 } dErrDisNotifyInfoLoopDetectedVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VLAN ID that has detected a loopback." ::= { dErrDisNotifyInfo 2 } dErrDisNotifyInfoReasonID OBJECT-TYPE SYNTAX DErrDisReasonID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the condition which cause a port/vlan enter into error disabled state." ::= { dErrDisNotifyInfo 3 } -- *************************************************************************** -- Notifications -- *************************************************************************** dErrDisNotifyPortDisabledAssert NOTIFICATION-TYPE OBJECTS { dErrDisNotifyInfoPortIfIndex, dErrDisNotifyInfoReasonID } STATUS current DESCRIPTION "The trap is sent when a port enters into error disabled state." ::= { dErrDisableMIBNotifications 1 } dErrDisNotifyPortDisabledClear NOTIFICATION-TYPE OBJECTS { dErrDisNotifyInfoPortIfIndex, dErrDisNotifyInfoReasonID } STATUS current DESCRIPTION "The trap is sent when a port loop restarts after the interval time." ::= { dErrDisableMIBNotifications 2 } dErrDisNotifyVlanDisabledAssert NOTIFICATION-TYPE OBJECTS { dErrDisNotifyInfoPortIfIndex, dErrDisNotifyInfoReasonID, dErrDisNotifyInfoLoopDetectedVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID loop occurs." ::= { dErrDisableMIBNotifications 3 } dErrDisNotifyVlanDisabledClear NOTIFICATION-TYPE OBJECTS { dErrDisNotifyInfoPortIfIndex, dErrDisNotifyInfoReasonID, dErrDisNotifyInfoLoopDetectedVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID restarts after the interval time." ::= { dErrDisableMIBNotifications 4 } -- *************************************************************************** -- Conformance -- *************************************************************************** dErrDisMIBCompliances OBJECT IDENTIFIER ::= { dErrDisableMIBConformance 1 } dErrDisMIBGroups OBJECT IDENTIFIER ::= { dErrDisableMIBConformance 2 } dErrDisMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKSW-ERROR-DISABLE-MIB." MODULE -- this module MANDATORY-GROUPS { dErrDisRecoveryCfgGroup, dErrDisIfStatusGroup, dErrDisNotifyCfgGroup, dErrDisNotificationGroup } ::= { dErrDisMIBCompliances 1 } dErrDisRecoveryCfgGroup OBJECT-GROUP OBJECTS { dErrDisRecoveryEnable, dErrDisRecoveryInterval } STATUS current DESCRIPTION "A collection of objects to configure the error recovery of the error-disable feature." ::= { dErrDisMIBGroups 1 } dErrDisIfStatusGroup OBJECT-GROUP OBJECTS { dErrDisIfStatusTableNum, dErrDisIfStatusTimeLeft } STATUS current DESCRIPTION "A collection of objects which indicate error-disable interface status." ::= { dErrDisMIBGroups 2 } dErrDisNotifyCfgGroup OBJECT-GROUP OBJECTS { dErrDisNotificationEnable, dErrDisNotifRate, dErrDisNotifyInfoPortIfIndex, dErrDisNotifyInfoReasonID, dErrDisNotifyInfoLoopDetectedVID } STATUS current DESCRIPTION "A collection of objects to configure the error recovery of the error-disable feature." ::= { dErrDisMIBGroups 3 } dErrDisNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { dErrDisNotifyPortDisabledAssert, dErrDisNotifyPortDisabledClear, dErrDisNotifyVlanDisabledAssert, dErrDisNotifyVlanDisabledClear } STATUS current DESCRIPTION "The collection of notifications used for monitoring ErrDisable status" ::= { dErrDisMIBGroups 4 } END