-- ***************************************************************** -- DLINKSW-IP-EXT-MIB.mib : IP Extension MIB -- -- Copyright (c) 2013 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKSW-IP-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI RowStatus, TruthValue, DisplayString, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetPortNumber, InetAddressType, InetAddress, InetAddressIPv4, InetAddressIPv6, InetAddressPrefixLength FROM INET-ADDRESS-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; dlinkSwIpExtMIB MODULE-IDENTITY LAST-UPDATED "201309180000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "This MIB is an extension to the standard IP-MIB." REVISION "201308060000Z" DESCRIPTION "Initial version of this MIB." REVISION "201308290000Z" DESCRIPTION "1.Add dIpExtGratuitousARPDadReplyEnabled." REVISION "201309180000Z" DESCRIPTION "1.Remove dIpExtDhcpClientIfRowStatus(Note:follow IP interface). 2.Update dIpExtDhcpClientIfLeaseDay value range(Note:follow UIS)." ::= { dlinkIndustrialCommon 75 } -- ----------------------------------------------------------------------------- dIpExtMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 0 } dIpExtMIBObjects OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 1 } dIpExtMIBConformance OBJECT IDENTIFIER ::= { dlinkSwIpExtMIB 2 } -- ----------------------------------------------------------------------------- dIpExtGratuitousARPTrap NOTIFICATION-TYPE OBJECTS { dIpExtGratuitousARPIpAddr, dIpExtGratuitousARPMacAddr, dIpExtGratuitousARPPortNumber, dIpExtIfCfgIfIndex } STATUS current DESCRIPTION "This trap is sent when there is an IP address conflict." ::={dIpExtMIBNotifications 1} -- ----------------------------------------------------------------------------- dIpExtGenArpMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 1} dIpExtClearArpCacheAll OBJECT-TYPE SYNTAX INTEGER { clear(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear all dynamic ARP entries from the table when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned." DEFVAL { noOp } ::= { dIpExtGenArpMgmt 1 } dIpExtClearArpCacheByIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ifIndex of the interface on which the dynamic ARP entries will be cleared. When read, a value of 0 is returned." ::= { dIpExtGenArpMgmt 2 } dIpExtTotalArpEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of ARP entries." ::= { dIpExtGenArpMgmt 3 } -- ----------------------------------------------------------------------------- dIpExtGratuitousArpMgmt OBJECT IDENTIFIER ::={ dIpExtMIBObjects 2 } dIpExtGratuitousARPSendRequestEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable transmission of gratuitous ARP request. The device will send out the packet when an IP interface becomes link up or when the IP address of an interface is configured or modified." DEFVAL { false } ::={ dIpExtGratuitousArpMgmt 1} dIpExtGratuitousARPLearningEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable learning of an ARP entry in the ARP cache based on the received gratuitous ARP packet. If the device receives a gratuitous ARP request/reply packet and the sender's IP address is in its ARP table, it should update the ARP entry. " DEFVAL { true } ::={ dIpExtGratuitousArpMgmt 2} dIpExtGratuitousARPDadReplyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable/disable sending of gratuitous ARP request while duplicate IP address is detected." DEFVAL { false } ::={ dIpExtGratuitousArpMgmt 3} dIpExtGratuitousARPTrapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the state of the gratuitous ARP trap. The switch can trap the IP conflict events to inform the administrator. By default, the trap is disabled." DEFVAL { false } ::={dIpExtGratuitousArpMgmt 4} dIpExtGratuitousARPNotifyInfo OBJECT IDENTIFIER ::= {dIpExtGratuitousArpMgmt 5 } dIpExtGratuitousARPIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A duplicate IP address with the switch already exists." ::={dIpExtGratuitousARPNotifyInfo 1} dIpExtGratuitousARPMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the MAC address of the device which has the duplicate IP address." ::={dIpExtGratuitousARPNotifyInfo 2} dIpExtGratuitousARPPortNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the the port number." ::={dIpExtGratuitousARPNotifyInfo 3} -- ----------------------------------------------------------------------------- dIpExtIpv6NeighborDiscoverMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 3} dIpExtClearAllIpv6Neighbors OBJECT-TYPE SYNTAX INTEGER { clear(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear dynamic neighbor cache entries associated with all interfaces when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned." DEFVAL { noOp } ::= { dIpExtIpv6NeighborDiscoverMgmt 1 } dIpExtClearIpv6NeighborsByIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ifIndex of the interface on which the dynamic neighbor cache entries will be cleared. When read, a value of 0 is returned." ::= { dIpExtIpv6NeighborDiscoverMgmt 2 } dIpExtTotalIpv6Neighbors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of dynamic neighbor cache entries." ::= { dIpExtIpv6NeighborDiscoverMgmt 3 } -- ----------------------------------------------------------------------------- dIpExtInterfaceMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 4} dIpExtIpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtIpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table provides the mechanism to create or delete layer 3 interfaces. It is expected that user first creates a row in this table, followed by configuring the row in dIpExtIfCfgTable via the corresponding ifIndex. " ::= { dIpExtInterfaceMgmt 1 } dIpExtIpIfEntry OBJECT-TYPE SYNTAX DIpExtIpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row instance contains the information of the layer 3 interface. Creating/deleting entries in this table causes corresponding entries be created/deleted in ifTable/ifXTable." INDEX { dIpExtIpIfType, dIpExtIpIfNumber } ::= { dIpExtIpIfTable 1 } DIpExtIpIfEntry ::= SEQUENCE { dIpExtIpIfType INTEGER, dIpExtIpIfNumber Unsigned32, dIpExtIpIfIndex InterfaceIndex, dIpExtIpIfRowStatus RowStatus } dIpExtIpIfType OBJECT-TYPE SYNTAX INTEGER { loopback(1), vlan(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the type of the interface. 'loopback' - The software only interface which always stays in up status. 'vlan' - VLAN interface. " ::= { dIpExtIpIfEntry 1 } dIpExtIpIfNumber OBJECT-TYPE SYNTAX Unsigned32 (0 .. 65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface ID within the type. " ::= { dIpExtIpIfEntry 2 } dIpExtIpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface is determined by the agent. " ::= { dIpExtIpIfEntry 3 } dIpExtIpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dIpExtIpIfEntry 4 } -- ----------------------------------------------------------------------------- dIpExtIfCfgTableNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of entries present in the dIpExtIfCfgTable." ::= { dIpExtInterfaceMgmt 2 } dIpExtIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains extended per-interface information." ::= { dIpExtInterfaceMgmt 3 } dIpExtIfCfgEntry OBJECT-TYPE SYNTAX DIpExtIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table is created as a side effect of row addition in the dIpExtIpIfTable. " INDEX { dIpExtIfCfgIfIndex } ::= { dIpExtIfCfgTable 1 } DIpExtIfCfgEntry ::= SEQUENCE { dIpExtIfCfgIfIndex InterfaceIndex, dIpExtIfCfgDhcpEnabled TruthValue, dIpExtIfCfgArpTimeout Unsigned32, dIpExtIfCfgProxyArpEnabled TruthValue, dIpExtIfCfgLocalProxyArpEnabled TruthValue, dIpExtIfCfgDirectedBcastEnabled TruthValue, dIpExtIfCfgDirectedBcastAcl DisplayString, dIpExtIfCfgGratuitousARPSendInterval Unsigned32, dIpExtIfCfgIpMtu Unsigned32, dIpExtIfCfgDADTransmits Unsigned32 } dIpExtIfCfgIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. " ::= { dIpExtIfCfgEntry 1 } dIpExtIfCfgDhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates whether acquire an IP address configuration on the interface from the DHCP protocol." DEFVAL { false } ::= { dIpExtIfCfgEntry 2 } dIpExtIfCfgArpTimeout OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..65535) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ARP aging time in unit of minute for dynamic ARP entries on the corresponding interface. Setting this variable to 0 the ARP entries will not be aged out." DEFVAL { 240 } ::= { dIpExtIfCfgEntry 3 } dIpExtIfCfgProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the state of proxy ARP on the corresponding interface." DEFVAL { false } ::= { dIpExtIfCfgEntry 4 } dIpExtIfCfgLocalProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the state of local proxy ARP on the corresponding interface." DEFVAL { false } ::= { dIpExtIfCfgEntry 5 } dIpExtIfCfgDirectedBcastEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the state of the conversion of IP directed broadcasts on the corresponding interface." DEFVAL { false } ::= { dIpExtIfCfgEntry 6 } dIpExtIfCfgDirectedBcastAcl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the name of a standard IP access list." ::= { dIpExtIfCfgEntry 7 } dIpExtIfCfgGratuitousARPSendInterval OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval of regularly sending the gratuitous ARP request message in unit of second on the corresponding interface. A value of zero indicates the gratuitous ARP will not be regularly sent." DEFVAL { 0 } ::= { dIpExtIfCfgEntry 8 } dIpExtIfCfgIpMtu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The MTU is the largest size of the IP datagram which may be transferred using a specific data link connection. The MTU value is a design parameter of a LAN and is a mutually agreed value (i.e. both ends of a link agree to use the same specific value) for most WAN links. The MTU range is based on the chip of the current device." DEFVAL { 1500 } ::= { dIpExtIfCfgEntry 9 } dIpExtIfCfgDADTransmits OBJECT-TYPE SYNTAX Unsigned32 ( 0..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the number of Neighbor Solicitations to send during Duplicate Address Detection (DAD). A value of zero indicates DAD is disabled. " DEFVAL { 1 } ::= { dIpExtIfCfgEntry 10 } -- ----------------------------------------------------------------------------- dIpExtIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this entity's IP addresses. This is the enhancement of the ipAddressTable in IP-MIB. Creating/deleting entries in this table causes corresponding entries be created/deleted in ipAddressTable." ::= { dIpExtInterfaceMgmt 4 } dIpExtIpAddressEntry OBJECT-TYPE SYNTAX DIpExtIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The addressing information for one of this entity's IP addresses. " INDEX { dIpExtIpAddressType, dIpExtIpAddress, dIpExtIpAddressIfIndex } ::= { dIpExtIpAddressTable 1 } DIpExtIpAddressEntry ::= SEQUENCE { dIpExtIpAddressType InetAddressType, dIpExtIpAddress InetAddress, dIpExtIpAddressIfIndex InterfaceIndex, dIpExtIpAddressPrefixLength InetAddressPrefixLength, dIpExtIpAddressCategory INTEGER, dIpExtIpAddressRowStatus RowStatus } dIpExtIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Internet address type of entry." ::= { dIpExtIpAddressEntry 1 } dIpExtIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { dIpExtIpAddressEntry 2 } dIpExtIpAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex value which uniquely identifies the interface to which this entry is applicable. " ::= { dIpExtIpAddressEntry 3 } dIpExtIpAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the prefix associated with the IP address of this entry. " ::= { dIpExtIpAddressEntry 4 } dIpExtIpAddressCategory OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), linkLocal(3), eui64(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP address category of this entry. The 'primary' and 'secondary' are valid for IPv4 address. Although multiple IPv4 addresses can be created for an interface, at most one of these addresses is the primary IPv4 address, and the rest are secondary IPv4 address. 'linkLocal' and 'eui64' are valid for IPv6 address. 'linkLocal' - The IPv6 address is a link local address. 'eui64' - The IPv6 address is formed by EUI-64 interface ID. The corresponding prefix length must be smaller than 64. " ::= { dIpExtIpAddressEntry 5 } dIpExtIpAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to manage creation and deletion of rows in this table. " ::= { dIpExtIpAddressEntry 6 } -- ----------------------------------------------------------------------------- dIpExtIpAddrBaseGenPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtAddrBaseGenPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the configuration of IPv6 address based on a general prefix. " ::= { dIpExtInterfaceMgmt 5 } dIpExtIpAddrBaseGenPrefixEntry OBJECT-TYPE SYNTAX DIpExtAddrBaseGenPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the association of general prefix for configuring IPv6 address on an interface. " INDEX { dIpExtIpAddrBasePrefixIfIndex, dIpExtIpAddrBasePrefixName } ::= { dIpExtIpAddrBaseGenPrefixTable 1 } DIpExtAddrBaseGenPrefixEntry ::= SEQUENCE { dIpExtIpAddrBasePrefixIfIndex InterfaceIndex, dIpExtIpAddrBasePrefixName DisplayString, dIpExtIpAddrBasePrefixSubBits InetAddressIPv6, dIpExtIpAddrBasePrefixLength InetAddressPrefixLength, dIpExtIpAddrBasePrefixRowStatus RowStatus } dIpExtIpAddrBasePrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex value which uniquely identifies the interface to which this entry is applicable. " ::= { dIpExtIpAddrBaseGenPrefixEntry 1 } dIpExtIpAddrBasePrefixName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the general prefix name which will be used to configure the IPv6 address on the interface. " ::= { dIpExtIpAddrBaseGenPrefixEntry 2 } dIpExtIpAddrBasePrefixSubBits OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the sub-prefix part and host part of the IPv6 address. " ::= { dIpExtIpAddrBaseGenPrefixEntry 3 } dIpExtIpAddrBasePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the prefix associated with the IP address of this entry. " ::= { dIpExtIpAddrBaseGenPrefixEntry 4 } dIpExtIpAddrBasePrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to manage creation and deletion of rows in this table. " ::= { dIpExtIpAddrBaseGenPrefixEntry 5 } -- ----------------------------------------------------------------------------- dIpExtPrefixMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 5} dIpExtIpv6GneralPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtIpv6GneralPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the creation and removal of IPv6 general prefixes. " ::= { dIpExtPrefixMgmt 1 } dIpExtIpv6GneralPrefixEntry OBJECT-TYPE SYNTAX DIpExtIpv6GneralPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consists of information of an IPv6 general prefix." INDEX { dIpExtGneralPrefixName } ::= { dIpExtIpv6GneralPrefixTable 1 } DIpExtIpv6GneralPrefixEntry ::= SEQUENCE { dIpExtGneralPrefixName DisplayString, dIpExtGneralPrefixType INTEGER, dIpExtGneralPrefix InetAddressIPv6, dIpExtGneralPrefixLength InetAddressPrefixLength, dIpExtGeneralPrefix6to4IfIndex InterfaceIndex, dIpExtGeneralPrefixRowStatus RowStatus } dIpExtGneralPrefixName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex value which uniquely identifies the interface to which this entry is applicable. " ::= { dIpExtIpv6GneralPrefixEntry 1 } dIpExtGneralPrefixType OBJECT-TYPE SYNTAX INTEGER { normal(1), ipv6ToIpv4(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of the prefix configuration. 'normal' - This general prefix is configured by dIpExtGneralPrefix and dIpExtGneralPrefixLength. 'ipv6ToIpv4' - The general prefix is configured by the interface (dIpExtGeneralPrefix6to4IfIndex) whose IPv4 address will be used to form a general prefix used for 6to4 tunnel. " ::= { dIpExtIpv6GneralPrefixEntry 2 } dIpExtGneralPrefix OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the prefix of the entry. This object is meaningless when dIpExtGneralPrefixType is not 'normal'. " ::= { dIpExtIpv6GneralPrefixEntry 3 } dIpExtGneralPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the prefix associated with the general prefix of this entry. This object is meaningless when dIpExtGneralPrefixType is not 'normal'. " ::= { dIpExtIpv6GneralPrefixEntry 4 } dIpExtGeneralPrefix6to4IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates ifIndex of the interface whose IPv4 address will be used to form a general prefix used for 6to4 tunnel. This object is meaningless when dIpExtGneralPrefixType is not 'ipv6ToIpv4'. " ::= { dIpExtIpv6GneralPrefixEntry 5 } dIpExtGeneralPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of IPv6 general prefixes. " ::= { dIpExtIpv6GneralPrefixEntry 6 } -- ----------------------------------------------------------------------------- dIpExtIpv6PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtIpv6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the creation and removal of IPv6 prefixes to be placed in Prefix Information options in Router Advertisement messages sent from the interface. This is the enhancement of the ipAddressPrefixTable in IP-MIB. " ::= { dIpExtPrefixMgmt 2 } dIpExtIpv6PrefixEntry OBJECT-TYPE SYNTAX DIpExtIpv6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 interface prefix entry." INDEX { dIpExtIpv6PrefixIfIndex, dIpExtIpv6Prefix, dIpExtIpv6PrefixLength } ::= { dIpExtIpv6PrefixTable 1 } DIpExtIpv6PrefixEntry ::= SEQUENCE { dIpExtIpv6PrefixIfIndex InterfaceIndex, dIpExtIpv6Prefix InetAddressIPv6, dIpExtIpv6PrefixLength InetAddressPrefixLength, dIpExtIpv6PrefixValidLifetime Unsigned32, dIpExtIpv6PrefixPreferLifetime Unsigned32, dIpExtIpv6PrefixOnLinkFlag TruthValue, dIpExtIpv6PrefixAutonomousFlag TruthValue, dIpExtIpv6PrefixRowStatus RowStatus } dIpExtIpv6PrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex value which uniquely identifies the interface to which this entry is applicable. " ::= { dIpExtIpv6PrefixEntry 1 } dIpExtIpv6Prefix OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix of the entry." ::= { dIpExtIpv6PrefixEntry 2 } dIpExtIpv6PrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length of the entry." ::= { dIpExtIpv6PrefixEntry 3 } dIpExtIpv6PrefixValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the valid life time in seconds of the entry. A value of 4,294,967,295 represents infinity. " DEFVAL { 2592000 } ::= { dIpExtIpv6PrefixEntry 4 } dIpExtIpv6PrefixPreferLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the preferred life time in seconds of the entry. A value of 4,294,967,295 represents infinity. " DEFVAL { 604800 } ::= { dIpExtIpv6PrefixEntry 5 } dIpExtIpv6PrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination; otherwise, the value is 'false(2)'. The default for IPv4 prefixes is 'true(1)'." DEFVAL { false } ::= { dIpExtIpv6PrefixEntry 6 } dIpExtIpv6PrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e., can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address. The default for IPv4 prefixes is 'false(2)'." DEFVAL { true } ::= { dIpExtIpv6PrefixEntry 7 } dIpExtIpv6PrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to control the addition and removal of IPv6 interface prefixes for RA messages." ::= { dIpExtIpv6PrefixEntry 8 } -- ----------------------------------------------------------------------------- dIpExtDhcpClientMgmt OBJECT IDENTIFIER ::={ dIpExtMIBObjects 6 } dIpExtDhcpClientIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtDhcpClientIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains a list of DHCP client configuration of interfaces." ::= { dIpExtDhcpClientMgmt 1 } dIpExtDhcpClientIfEntry OBJECT-TYPE SYNTAX DIpExtDhcpClientIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is created to configure DHCP client per-interface settings to different value from default value. When an entry is deleted, all the settings are reverted to default value." INDEX { dIpExtDhcpClientIfIndex } ::= { dIpExtDhcpClientIfTable 1 } DIpExtDhcpClientIfEntry ::= SEQUENCE { dIpExtDhcpClientIfIndex InterfaceIndex, dIpExtDhcpClientIfClassIdType INTEGER, dIpExtDhcpClientIfClassIdValue DisplayString, dIpExtDhcpClientIfClientIdIfIdx InterfaceIndex, dIpExtDhcpClientIfLeaseDay Integer32, dIpExtDhcpClientIfLeaseHour Unsigned32, dIpExtDhcpClientIfLeaseMinute Unsigned32, dIpExtDhcpClientIfHostName DisplayString } dIpExtDhcpClientIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface. Only VLAN interfaces are valid interfaces." ::= { dIpExtDhcpClientIfEntry 1 } dIpExtDhcpClientIfClassIdType OBJECT-TYPE SYNTAX INTEGER { ascii(1), hex(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the type of class id which is defined by dIpExtDhcpClientIfClassIdValue. The value means : ascii(1)- The dIpExtDhcpClientIfClassIdValue is ascii string. hex(2) - The dIpExtDhcpClientIfClassIdValue is a string of HEX number. " ::= { dIpExtDhcpClientIfEntry 2 } dIpExtDhcpClientIfClassIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of vendor class identifier (option 60) to be sent with the DHCP DISCOVER message. An dIpExtDhcpClientIfClassIdValue value is always interpreted within the context of an dIpExtDhcpClientIfClassIdType value. If dIpExtDhcpClientIfClassIdType is 'hex', this object is a HEX string value, which is restricted to hexadecimal character set." ::= { dIpExtDhcpClientIfEntry 3 } dIpExtDhcpClientIfClientIdIfIdx OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates ifIndex of the VLAN interface whose hexadecimal MAC address will be used as the client ID to be sent with the DISCOVER message. " ::= { dIpExtDhcpClientIfEntry 4 } dIpExtDhcpClientIfHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the host name. The host name must start with a letter, end with a letter or digit, and only with interior characters letters, digits, and hyphens. " ::= { dIpExtDhcpClientIfEntry 5 } dIpExtDhcpClientIfLeaseDay OBJECT-TYPE SYNTAX Integer32 (-1 | 0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of days for the duration of preferred lease time. Value of -1 indicates that preferred lease time is unspecified. This value is checked when an IP address is acquired from a DHCP server. " DEFVAL { -1 } ::= { dIpExtDhcpClientIfEntry 6 } dIpExtDhcpClientIfLeaseHour OBJECT-TYPE SYNTAX Unsigned32 (0..23) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of hours for the duration of preferred lease time." DEFVAL { 0 } ::= { dIpExtDhcpClientIfEntry 7 } dIpExtDhcpClientIfLeaseMinute OBJECT-TYPE SYNTAX Unsigned32 (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of minutes for the duration of preferred lease time." DEFVAL { 0 } ::= { dIpExtDhcpClientIfEntry 8 } dIpExtDhcpClientAutoconfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of automatically getting the configuration information from a TFTP server connected to the device." ::= { dIpExtDhcpClientMgmt 2 } -- ----------------------------------------------------------------------------- dIpExtUdpForwardMgmt OBJECT IDENTIFIER ::={dIpExtMIBObjects 7} dIpExtUdpFwdPortTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtUdpFwdPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of a list of UDP ports to forward UDP packets. " ::= { dIpExtUdpForwardMgmt 1 } dIpExtUdpFwdPortEntry OBJECT-TYPE SYNTAX DIpExtUdpFwdPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is created/deleted to enable/disable forwarding of a specific UDP service type of packets." INDEX { dIpExtUdpFwdPortNumber } ::= { dIpExtUdpFwdPortTable 1 } DIpExtUdpFwdPortEntry ::= SEQUENCE { dIpExtUdpFwdPortNumber InetPortNumber, dIpExtUdpFwdPortRowStatus RowStatus } dIpExtUdpFwdPortNumber OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The UDP port number of the entry. " ::= { dIpExtUdpFwdPortEntry 1 } dIpExtUdpFwdPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dIpExtUdpFwdPortEntry 2 } -- ----------------------------------------------------------------------------- dIpExtUdpHelperAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF DIpExtUdpHelperAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table consists of a list of target addresses for forwarding of UDP broadcast packets. " ::= { dIpExtUdpForwardMgmt 2 } dIpExtUdpHelperAddrEntry OBJECT-TYPE SYNTAX DIpExtUdpHelperAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An target IP address for forwarding of the UDP broadcast packet on an interface. " INDEX { dIpExtUdpHelperIfIndex, dIpExtUdpHelperAddrType, dIpExtUdpHelperAddr } ::= { dIpExtUdpHelperAddrTable 1 } DIpExtUdpHelperAddrEntry ::= SEQUENCE { dIpExtUdpHelperIfIndex InterfaceIndex, dIpExtUdpHelperAddrType InetAddressType, dIpExtUdpHelperAddr InetAddress, dIpExtUdpHelperAddrRowStatus RowStatus } dIpExtUdpHelperIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the interface on which the entry is configured. Only VLAN interfaces are valid interfaces." ::= { dIpExtUdpHelperAddrEntry 1 } dIpExtUdpHelperAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of UDP helper address." ::= { dIpExtUdpHelperAddrEntry 2 } dIpExtUdpHelperAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP address of the server. " ::= { dIpExtUdpHelperAddrEntry 3 } dIpExtUdpHelperAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { dIpExtUdpHelperAddrEntry 4 } -- *************************************************************************** -- Conformance -- *************************************************************************** dIpExtCompliances OBJECT IDENTIFIER ::= { dIpExtMIBConformance 1 } dIpExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKSW-IP-EXT-MIB." MODULE -- this module MANDATORY-GROUPS { dIpExtBasicGroup } GROUP dIpExtBasicIpv6OnlyGroup DESCRIPTION "This group is required only if IPv6 is implemented by the agent." GROUP dIpExtGeneralPrefixGroup DESCRIPTION "This group is required only if general prefix is implemented by the agent." OBJECT dIpExtGeneralPrefix6to4IfIndex MIN-ACCESS read-only DESCRIPTION "Create/Write access is required only if the agent supports forming a general prefix for 6to4 tunnel." GROUP dIpExtGratuitousArpGroup DESCRIPTION "This group is required only if Gratuitous ARP feature is implemented by the agent." GROUP dIpExtProxyArpGroup DESCRIPTION "This group is required only if Proxy ARP feature is implemented by the agent." OBJECT dIpExtIfCfgLocalProxyArpEnabled MIN-ACCESS read-only DESCRIPTION "Create/Write access is required only if the agent supports local Proxy ARP." GROUP dIpExtDirectedBroadcastGroup DESCRIPTION "This group is required only if IP directed broadcast is implemented by the agent." GROUP dIpExtDhcpClientGroup DESCRIPTION "This group is required only if IP DHCP client is implemented by the agent." GROUP dIpExtUdpForwardGroup DESCRIPTION "This group is required only if UDP forwarder is implemented by the agent." ::= { dIpExtCompliances 1 } dIpExtGroups OBJECT IDENTIFIER ::= { dIpExtMIBConformance 2 } dIpExtBasicGroup OBJECT-GROUP OBJECTS { dIpExtClearArpCacheAll, dIpExtClearArpCacheByIf, dIpExtTotalArpEntries, dIpExtIpIfIndex, dIpExtIpIfRowStatus, dIpExtIfCfgTableNumber, dIpExtIfCfgDhcpEnabled, dIpExtIfCfgArpTimeout, dIpExtIfCfgIpMtu, dIpExtIpAddressPrefixLength, dIpExtIpAddressCategory, dIpExtIpAddressRowStatus } STATUS current DESCRIPTION "This group contains the collection of objects related to IP/ARP settings which are not covered by standard IP-MIB." ::= { dIpExtGroups 1 } dIpExtBasicIpv6OnlyGroup OBJECT-GROUP OBJECTS { dIpExtClearAllIpv6Neighbors, dIpExtClearIpv6NeighborsByIf, dIpExtTotalIpv6Neighbors, dIpExtIfCfgDADTransmits } STATUS current DESCRIPTION "This group contains the collection of objects related to fundamental IPv6 feature." ::= { dIpExtGroups 2 } dIpExtGeneralPrefixGroup OBJECT-GROUP OBJECTS { dIpExtIpAddrBasePrefixSubBits, dIpExtIpAddrBasePrefixLength, dIpExtIpAddrBasePrefixRowStatus, dIpExtGneralPrefixType, dIpExtGneralPrefix, dIpExtGneralPrefixLength, dIpExtGeneralPrefix6to4IfIndex, dIpExtGeneralPrefixRowStatus } STATUS current DESCRIPTION "This group contains the collection of objects related to general prefix configuration." ::= { dIpExtGroups 3 } dIpExtRaPrefixGroup OBJECT-GROUP OBJECTS { dIpExtIpv6Prefix, dIpExtIpv6PrefixLength, dIpExtIpv6PrefixValidLifetime, dIpExtIpv6PrefixPreferLifetime, dIpExtIpv6PrefixOnLinkFlag, dIpExtIpv6PrefixAutonomousFlag, dIpExtIpv6PrefixRowStatus } STATUS current DESCRIPTION "This group contains the collection of objects related to the configuration of IPv6 prefix which are advertised in RA." ::= { dIpExtGroups 4 } dIpExtGratuitousArpGroup OBJECT-GROUP OBJECTS { dIpExtIfCfgGratuitousARPSendInterval, dIpExtGratuitousARPSendRequestEnabled, dIpExtGratuitousARPLearningEnabled } STATUS current DESCRIPTION "This group contains the collection of objects related to Gratuitous ARP feature." ::= { dIpExtGroups 5 } dIpExtProxyArpGroup OBJECT-GROUP OBJECTS { dIpExtIfCfgProxyArpEnabled, dIpExtIfCfgLocalProxyArpEnabled } STATUS current DESCRIPTION "This group contains the collection of objects related to Proxy ARP." ::= { dIpExtGroups 6 } dIpExtDirectedBroadcastGroup OBJECT-GROUP OBJECTS { dIpExtIfCfgDirectedBcastEnabled, dIpExtIfCfgDirectedBcastAcl } STATUS current DESCRIPTION "This group contains the collection of objects related to IP directed broadcasts feature." ::= { dIpExtGroups 7 } dIpExtDhcpClientGroup OBJECT-GROUP OBJECTS { dIpExtDhcpClientIfClassIdType, dIpExtDhcpClientIfClassIdValue, dIpExtDhcpClientIfClientIdIfIdx, dIpExtDhcpClientIfHostName, dIpExtDhcpClientIfLeaseDay, dIpExtDhcpClientIfLeaseHour, dIpExtDhcpClientIfLeaseMinute } STATUS current DESCRIPTION "This group contains the collection of objects related to DHCP client." ::= { dIpExtGroups 8 } dIpExtUdpForwardGroup OBJECT-GROUP OBJECTS { dIpExtUdpFwdPortRowStatus, dIpExtUdpHelperAddrRowStatus } STATUS current DESCRIPTION "This group contains the collection of objects related to UDP forwarding feature." ::= { dIpExtGroups 9 } END