-- *****************************************************************
-- DLINKSW-LACP-EXT-MIB.mib : D-Link Link Aggregation Control Extenstions MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--   
-- *****************************************************************    

DLINKSW-LACP-EXT-MIB DEFINITIONS ::= BEGIN    

	IMPORTS
        MODULE-IDENTITY , OBJECT-TYPE, Integer32	
        	FROM SNMPv2-SMI    	
       	RowStatus           
       		FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP
		    FROM SNMPv2-CONF
       	InterfaceIndex
            FROM IF-MIB  
       	PortList
            FROM Q-BRIDGE-MIB	
	    dlinkIndustrialCommon
        	FROM DLINK-ID-REC-MIB;    
        	
	dlinkSwLacpExtMIB MODULE-IDENTITY
        LAST-UPDATED "201301180000Z"
        ORGANIZATION "D-Link Corp."
        CONTACT-INFO
            "        D-Link Corporation
             Postal: No. 289, Sinhu 3rd Rd., Neihu District,
             Taipei City 114, Taiwan, R.O.C
             Tel:     +886-2-66000123
             E-mail: tsd@dlink.com.tw
            "
        DESCRIPTION
            "The MIB module for managing D-Link LACP extensions which are
            not covered by standard MIBs."
        REVISION	"201301180000Z"
        DESCRIPTION
        	"Initial revision of this MIB module."
    ::= { dlinkIndustrialCommon 4 }
 
    dLacpExtMIBNotifications 	OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 0 }	
    dLacpExtMIBObjects 		    OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 1 }	 
    dLacpExtMIBConformance 		OBJECT IDENTIFIER ::= { dlinkSwLacpExtMIB 2 }
       

-----------------------------------------------
--	Lacp Objects
-----------------------------------------------
    dLacpExtLoadBalanceAlgorithm OBJECT-TYPE
        SYNTAX  INTEGER {
                dstIp(1),
                dstMac(2),
                srcDstIp(3),
                srcDstMac(4),
                srcIp(5),
                srcMac(6)
            }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object configures load balance algorithm that the switch uses
            to distribute packets across ports in the same channel.
            dstIp(1)  -	Specify that the switch should examine the destination
                        IP address.
            dstMac(2) -	Specify that the switch should examine the destination
                        MAC address.
            srcDstIp(3) - Specify that the switch should examine the source 
                       and destination IP address.
            srcDstMac(4) - Specify that the switch should examine the source and
                       destination MAC address.
            srcIp(5) - Specify that the switch should examine the source IP 
                       address.
            srcMac(6) -	Specify that the switch should examine the source MAC
                       address.            
            "
        ::= { dLacpExtMIBObjects 1 }

    dLacpExtGroupTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF DLacpExtGroupEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "This table consists of a list of channel group information."
        ::= { dLacpExtMIBObjects 2 }

    dLacpExtGroupEntry OBJECT-TYPE
        SYNTAX          DLacpExtGroupEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "An entry presents a channel group information, which is not 
            covered by standard MIB(s)."
        INDEX  { dLacpExtGroupChannelNo }
        ::= { dLacpExtGroupTable 1 }

    DLacpExtGroupEntry ::=
        SEQUENCE {
            dLacpExtGroupChannelNo          Integer32,
            dLacpExtGroupIfIndex            InterfaceIndex,
            dLacpExtGroupType               INTEGER,
            dLacpExtGroupMemberPorts        PortList,            
            dLacpExtGroupActiveMemberPorts  PortList,
            dLacpExtGroupRowStatus          RowStatus
        }

    dLacpExtGroupChannelNo OBJECT-TYPE
        SYNTAX          Integer32 (1 .. 255)  
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "This object indicates the channel group ID. "
        ::= { dLacpExtGroupEntry 1 }
        
    dLacpExtGroupIfIndex OBJECT-TYPE
        SYNTAX          InterfaceIndex  
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "The ifIndex of the channel group."
        ::= { dLacpExtGroupEntry 2 }
    
    dLacpExtGroupType OBJECT-TYPE
        SYNTAX  INTEGER {              
            static(1),
            lacp(2)
        }
       	MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the type of channel group.
            "
        ::= { dLacpExtGroupEntry 3 }    

    dLacpExtGroupMemberPorts OBJECT-TYPE
        SYNTAX          PortList
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
            "This object indicates the ports which are grouped into this
            channel group.
	        "
        ::= { dLacpExtGroupEntry 4 }
     
    dLacpExtGroupActiveMemberPorts OBJECT-TYPE
        SYNTAX          PortList
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "This object indicates the operational bundled ports in this
            channel group.
            "	
        ::= { dLacpExtGroupEntry 5 }
        
    dLacpExtGroupRowStatus OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { dLacpExtGroupEntry 6 }
                              
-----------------------------------------------
--	Lacp Conformance
-----------------------------------------------
    dLacpExtCompliances   	OBJECT IDENTIFIER ::= { dLacpExtMIBConformance 1 }
	 
	
    dLacpExtCompliance MODULE-COMPLIANCE
    	STATUS current
    	DESCRIPTION
        	"The compliance statement for entities which implement the 
			DLINKSW-LACP-EXT-MIB."      		 
        MODULE
	    MANDATORY-GROUPS {
		    dLacpExtAlgGroup,
		    dLacpExtChannelGrpInfoGroup
		}
	    ::= { dLacpExtCompliances 1 }
	
	dLacpExtGroups   		OBJECT IDENTIFIER ::= { dLacpExtMIBConformance 2 }      
	       
    dLacpExtAlgGroup OBJECT-GROUP
  		OBJECTS {
	         dLacpExtLoadBalanceAlgorithm
            }
	    STATUS          current
	    DESCRIPTION
	        "A collection of objects providing information about the algorithm of
	        link aggregation load sharing."
	    ::= { dLacpExtGroups 1 }

    dLacpExtChannelGrpInfoGroup OBJECT-GROUP
  		OBJECTS {	   
  		    dLacpExtGroupIfIndex,     
            dLacpExtGroupType,        
            dLacpExtGroupMemberPorts,
            dLacpExtGroupActiveMemberPorts,
            dLacpExtGroupRowStatus   
        }
	    STATUS current
	    DESCRIPTION
	        "A collection of objects providing configuration of channel groups."
	    ::= { dLacpExtGroups 2 }

            
END