-- ********************************************************************* -- DLINKSW-NETWORK-ACCESS-MIB: Network Access Authentication -- configuration and information MIB -- -- Copyright (c) 2013 D-Link Corporation, all rights reserved. -- -- ******************************************************************* DLINKSW-NETWORK-ACCESS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MacAddress, TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB ifIndex FROM IF-MIB VlanIdOrNone FROM Q-BRIDGE-MIB Dlink2kVlanList FROM DLINKSW-TC-MIB dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; dlinkSwNetworkAccessAuthMIB MODULE-IDENTITY LAST-UPDATED "201307180000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "This MIB module defines objects for Network Access Authentication in the system. Network Access Authentication provides generic configurations for authentication methods in the system and manages the failover sequence of these methods in a flexible manner." REVISION "201307180000Z" DESCRIPTION "This is the first version of the MIB file for 'Network Access Authentication.' functionality. " ::= { dlinkIndustrialCommon 151 } -- Textual Conventions DlinkAuthMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication methods and protocols supported in Network Access Authentication. other : other methods no defined here. 'other' is a read-only value and cannot be used in set operation. dot1x : 802.1X Protocol. macAuth : MAC-based Access Control. webAuth : Web-based Access Control. jwac : Japanese Web Authentication. " SYNTAX INTEGER { other(1), dot1x(2), macAuth(3), webAuth(4), jwac(5) } DlinkAuthMethodList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication methods being used by Network Access Authentication. This object is a bit map, with each bit representing a different authentication type as identified below. A 1-bit indicates the authentication method is used. A 0-bit indicates the authentication method is not used. dot1x : 802.1X Protocol. macAuth : MAC-based Access Control. webAuth : Web-based Access Control. jwac : Japanese Web Authentication. " SYNTAX BITS { dot1x(0), macAuth(1), webAuth(2), jwac(3) } DlinkAuthHostMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication mode of a controlled port. multiHost : If a port is operated in multi-host mode, once a host is authenticated, all remaining hosts are also authenticated in a single domain. multiAuth : If a port is operated in multi-auth mode, each host is authenticated separately in a single domain." SYNTAX INTEGER { multiHost(1), multiAuth(2) } DlinkCompAuthMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The compound authentication mode of a controlled port. any : The host needs pass one of the authentication methods (802.1X, MAC-based Access Control, WAC and JWAC). macJwac : MAC-based Access Control will be verified first. If a client passed MAC authentication, JWAC will be verified. The host needs pass both authentication methods. macWac : MAC-based Access Control will be verified first. If a client passed MAC authentication, WAC will be verified. The host needs pass both authentication methods. " SYNTAX INTEGER { any(1), macJwac(2), macWac(3) } -- ----------------------------------------------------------------------------- dNetAccessAuthMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwNetworkAccessAuthMIB 0 } dNetAccessAuthMIBObjects OBJECT IDENTIFIER ::= { dlinkSwNetworkAccessAuthMIB 1 } dNetAccessAuthMIBConformance OBJECT IDENTIFIER ::= { dlinkSwNetworkAccessAuthMIB 2 } -- ----------------------------------------------------------------------------- dNetAuthSystem OBJECT IDENTIFIER ::= { dNetAccessAuthMIBObjects 1 } dNetAuthAuthenticator OBJECT IDENTIFIER ::= { dNetAccessAuthMIBObjects 2 } dNetAuthSession OBJECT IDENTIFIER ::= { dNetAccessAuthMIBObjects 3 } dNetAuthUser OBJECT IDENTIFIER ::= { dNetAccessAuthMIBObjects 4 } -- ----------------------------------------------------------------------------- dnaMacMoveMode OBJECT-TYPE SYNTAX INTEGER { deny(1), permit(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether to allow authenticated hosts to do roaming across different switch ports. deny : When a host is authenticated on one port, that address is not allowed to move on another authenticated manager-enabled port of the device. permit: Authenticated hosts are allowed to move from one port to another on the same device. When a host moves to a new port, the authenticated session on the original port is deleted, and the host is re-authenticated on the new port." ::= { dNetAuthSystem 1 } dnaAuthorizationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the state of acceptance of the authorized configuration. When authorization is enabled for authentication, the authorized attributes (for example VLAN, 802.1p default priority, bandwidth, and ACL) will be accepted." ::= { dNetAuthSystem 2 } dnaMacFormatCase OBJECT-TYPE SYNTAX INTEGER { uppercase(1), lowercase(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the format of the authentication MAC address. uppercase: Using uppercase format, the formatted is: AA-BB-CC-DD-EE-FF. lowercase: Using lowercase format, the formatted is: aa-bb-cc-dd-ee-ff." DEFVAL { uppercase } ::= { dNetAuthSystem 3 } dnaMacFormatDelimiter OBJECT-TYPE SYNTAX INTEGER { none(1), hyphen(2), colon(3), dot(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the delimiter format of authentication MAC address. none: Not using any delimiter, the format is: AABBCCDDEEFF hyphen: Using '-' as delimiter, the format is: AA-BB-CC-DD-EE-FF colon: Using ':' as delimiter, the format is: AA:BB:CC:DD:EE:FF dot: Using '.' as delimiter, the format is: AA.BB.CC.DD.EE.FF" DEFVAL { none } ::= { dNetAuthSystem 4 } dnaMacFormatDelimiterNumber OBJECT-TYPE SYNTAX Integer32 ( 1 | 2 | 5 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the delimiter number of authentication MAC address. 1: single delimiter, the format is: AABBCC.DDEEFF 2: double delimiter, the format is: AABB.CCDD.EEFF 5: multiple delimiter, the format is: AA.BB.CC.DD.EE.FF Note: while dnaMacFormatDelimiter is none(1), the delimiter number will not take effect." ::= { dNetAuthSystem 5 } -- ----------------------------------------------------------------------------- dnaMaxAuthedUserLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum authenticated users of the system." ::= { dNetAuthAuthenticator 1 } dnaPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a list of configurations for ports. An entry will exist for every interface which supports Network Access Authentication feature." ::= { dNetAuthAuthenticator 2 } dnaPortConfigEntry OBJECT-TYPE SYNTAX DnaPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains port-specific configuration for Network Access Authentication." INDEX { ifIndex } ::= { dnaPortConfigTable 1 } DnaPortConfigEntry ::= SEQUENCE { dnaPortMaxAuthedUserLimit Unsigned32, dnaPortAuthHostMode DlinkAuthHostMode, dnaPortAuthVlansFirst2K Dlink2kVlanList, dnaPortAuthVlansSecond2K Dlink2kVlanList, dnaPortReauthEnabled TruthValue, dnaPortReauthInterval Unsigned32, dnaPortRestartInterval Unsigned32, dnaPortInactivityTimeout Integer32, dnaPortGuestVlanid VlanIdOrNone } dnaPortMaxAuthedUserLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum authenticated users of this port." ::= { dnaPortConfigEntry 1 } dnaPortAuthHostMode OBJECT-TYPE SYNTAX DlinkAuthHostMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the authentication host mode of the entry." ::= { dnaPortConfigEntry 2 } dnaPortAuthVlansFirst2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN needs authentication." ::= { dnaPortConfigEntry 3 } dnaPortAuthVlansSecond2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN needs authentication." ::= { dnaPortConfigEntry 4 } dnaPortReauthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the periodic re-authentication is enabled." ::= { dnaPortConfigEntry 5 } dnaPortReauthInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the re-authentication interval, after which the port will be re-authenticated if value of the corresponding instance of dnaPortReauthEnabled is 'true'. A value of zero indicates that the re-authentication interval is based on AAA server when this port is authenticated. Besides, the action (re-authenticate or initialize) to take after expiration of the timer is also based on server. " ::= { dnaPortConfigEntry 6 } dnaPortRestartInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized." ::= { dnaPortConfigEntry 7 } dnaPortInactivityTimeout OBJECT-TYPE SYNTAX Integer32 (-1 | 0 | 1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the period of time that a client associating with this port is allowed to be inactive before being terminated. A value of zero indicates that inactivity timeout is disabled on this port. A value of -1 indicates that inactivity timeout is based on AAA server when this port is authenticated." ::= { dnaPortConfigEntry 8 } dnaPortGuestVlanid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the VLAN ID of guest VLAN on the interface. The guest VLAN allows the user access within the guest VLAN before it is authenticated. A value of zero for this object indicates guest VLAN is not configured for the interface." ::= { dnaPortConfigEntry 9 } -- ----------------------------------------------------------------------------- dnaPortMethodTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaPortMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains a list of authentication methods information on ports. An entry will exist for every port which supports Network Access Authentication feature." ::= { dNetAuthAuthenticator 3 } dnaPortMethodEntry OBJECT-TYPE SYNTAX DnaPortMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains configuration and information of authentication methods for a particular port." INDEX { ifIndex } ::= { dnaPortMethodTable 1 } DnaPortMethodEntry ::= SEQUENCE { dnaPortMethodAvailable DlinkAuthMethodList, dnaPortMethodCompAuthMode DlinkCompAuthMode } dnaPortMethodAvailable OBJECT-TYPE SYNTAX DlinkAuthMethodList MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the currently effective authentication methods on the port. e.g: The dnaPortMethodCompAuthMode of the interface is set to any(1), but only dot1x is running on this interface, macAuth, webAuth and jwac are disabled, only the bit of dot1x is '1'." ::= { dnaPortMethodEntry 1 } dnaPortMethodCompAuthMode OBJECT-TYPE SYNTAX DlinkCompAuthMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the compound authentication mode on the port." ::= { dnaPortMethodEntry 2 } -- ----------------------------------------------------------------------------- dnaSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains a list of authentication sessions. An entry is created when an authentication session has been successfully created within Network Access Authentication. An entry is deleted when an authentication session has been removed." ::= { dNetAuthSession 1 } dnaSessionEntry OBJECT-TYPE SYNTAX DnaSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains management information for a particular authentication session." INDEX { ifIndex, dnaSessionId } ::= { dnaSessionTable 1 } DnaSessionEntry ::= SEQUENCE { dnaSessionId Unsigned32, dnaSessionClientMacAddress MacAddress, dnaSessionClientAddrType InetAddressType, dnaSessionClientAddress InetAddress, dnaSessionStatus INTEGER, dnaSessionAuthUserName SnmpAdminString, dnaSessionAuthorizedBy DlinkAuthMethod, dnaSessionAuthVlan VlanIdOrNone, dnaSessionAccountingID SnmpAdminString, dnaSessionAssignVid VlanIdOrNone, dnaSessionAssignPriority Integer32, dnaSessionAssignIngressBandwidth Integer32, dnaSessionAssignEgressBandwidth Integer32, dnaSessionTimeout Unsigned32, dnaSessionTimeLeft Unsigned32, dnaSessionInactivityTimeout Unsigned32, dnaSessionInactivityTimeLeft Unsigned32, dnaSessionTerminateSession INTEGER } dnaSessionId OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 0xffffffff) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates a unique identifier of the authentication session." ::= { dnaSessionEntry 1 } dnaSessionClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the MAC address of the device associates with the authentication session." ::= { dnaSessionEntry 2 } dnaSessionClientAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of Internet address of the client associates with the authentication session. This object is meaningful only when the corresponding dnaSessionAuthorizedBy is webAuth or jwac." ::= { dnaSessionEntry 3 } dnaSessionClientAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Internet address of the client associates with the authentication session. This object is meaningful only when the corresponding dnaSessionAuthorizedBy is webAuth or jwac." ::= { dnaSessionEntry 4 } dnaSessionStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), authenticating(2), noMethod(3), authenticationSuccess(4), authenticationFailed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the authentication session. idle : the session has been initialized and no method has run yet. authenticating : an authentication method is running for this session. noMethod : no authentication method has provided a result for this session. authenticationSuccess: an authentication method has resulted in authentication success for this session. authenticationFailed: an authentication method has resulted in authentication failed for this session." ::= { dnaSessionEntry 5 } dnaSessionAuthUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the user name of the authentication session. This object is meaningless when the corresponding dnaSessionAuthorizedBy is macAuth and a zero length string will be returned." ::= { dnaSessionEntry 6 } dnaSessionAuthorizedBy OBJECT-TYPE SYNTAX DlinkAuthMethod MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the method which authorizes the authentication session." ::= { dnaSessionEntry 7 } dnaSessionAuthVlan OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not applicable." ::= { dnaSessionEntry 8 } dnaSessionAccountingID OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the accounting session ID that using to accounting after authenticated." ::= { dnaSessionEntry 9 } dnaSessionAssignVid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the effectively assigned VLAN ID that are authorized after host pass authenticated. A value of zero indicates that no valid VLAN ID is authorized." ::= { dnaSessionEntry 10 } dnaSessionAssignPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the effectively assigned priority that is authorized after host pass authenticated. A value of -1 indicates that no valid priority is authorized." ::= { dnaSessionEntry 11 } dnaSessionAssignIngressBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the effectively assigned ingress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid ingress is authorized." ::= { dnaSessionEntry 12 } dnaSessionAssignEgressBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the effectively assigned egress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid egress is authorized." ::= { dnaSessionEntry 13 } dnaSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the session timeout used by Network Access Authentication for the authentication session." ::= { dnaSessionEntry 14 } dnaSessionTimeLeft OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the leftover time of the authentication session." ::= { dnaSessionEntry 15 } dnaSessionInactivityTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the inactivity timeout used by Network Access Authentication for the authentication session." ::= { dnaSessionEntry 16 } dnaSessionInactivityTimeLeft OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the leftover time of the inactivity timer of the authentication session." ::= { dnaSessionEntry 17 } dnaSessionTerminateSession OBJECT-TYPE SYNTAX INTEGER { terminate(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object terminates the authentication session, when set to 'terminate'. Setting this object to 'false' has no effect. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned." ::= { dnaSessionEntry 99 } -- ----------------------------------------------------------------------------- dnaSessionMethodInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaSessionMethodInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains a list of authenticating state information of methods for every authentication session. An entry exists for every authentication method that can initiate the authentication session within Network Access Authentication." ::= { dNetAuthSession 2 } dnaSessionMethodInfoEntry OBJECT-TYPE SYNTAX DnaSessionMethodInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains information for a particular effective authentication method which is associated with a session on an interface." INDEX { ifIndex, dnaSessionId, dnaSessionMethod } ::= { dnaSessionMethodInfoTable 1 } DnaSessionMethodInfoEntry ::= SEQUENCE { dnaSessionMethod DlinkAuthMethod, dnaSessionMethodState INTEGER } dnaSessionMethod OBJECT-TYPE SYNTAX DlinkAuthMethod MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the authentication method of the entry." ::= { dnaSessionMethodInfoEntry 1 } dnaSessionMethodState OBJECT-TYPE SYNTAX INTEGER { notInitiated(1), inProgress(2), authcSuccess(3), authcFailed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of this authentication method. notInitiated : The method hasn't initiated the authentication process yet. inProgress : The authentication method is in progress. authcSuccess: The session has been authenticated by the method. authcFailed : The session has failed to be authenticated by the method. " ::= { dnaSessionMethodInfoEntry 2 } -- ----------------------------------------------------------------------------- dnaSessionTerminateIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaSessionTerminateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to terminate authentication sessions by interface." ::= { dNetAuthSession 3 } dnaSessionTerminateIfEntry OBJECT-TYPE SYNTAX DnaSessionTerminateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry is used to terminate authentication sessions by specifying authentication methods per Network Access Authentication managed port." INDEX { ifIndex } ::= { dnaSessionTerminateIfTable 1 } DnaSessionTerminateIfEntry ::= SEQUENCE { dnaSessionTerminateIfMethodList DlinkAuthMethodList } dnaSessionTerminateIfMethodList OBJECT-TYPE SYNTAX DlinkAuthMethodList MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to terminate authentication sessions by methods on an interface by setting the corresponding bit to '1'. This object always returns '00'H when read." ::= { dnaSessionTerminateIfEntry 1 } -- ----------------------------------------------------------------------------- dnaSessionTerminateMethod OBJECT-TYPE SYNTAX DlinkAuthMethod MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to terminate the authentication sessions by setting this object to valid value. Setting this object to 'other' has no effect. When read, the value 'other' is returned." ::= { dNetAuthSession 4 } dnaSessionTerminateAll OBJECT-TYPE SYNTAX INTEGER { terminateAll(1), noOp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to terminate all authentication sessions by setting this object to 'terminateAll'. Setting this object to 'noOp' has no effect. When read, the value 'noOp' is returned." ::= { dNetAuthSession 5 } -- ----------------------------------------------------------------------------- dnaUserTable OBJECT-TYPE SYNTAX SEQUENCE OF DnaUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table contains a list of users in the local database for authentication." ::= { dNetAuthUser 1 } dnaUserEntry OBJECT-TYPE SYNTAX DnaUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consists of information for an account." INDEX { dnaUserName } ::= { dnaUserTable 1 } DnaUserEntry ::= SEQUENCE { dnaUserName DisplayString, dnaUserPassword DisplayString, dnaUserTargetVlanid VlanIdOrNone, dnaUserRowStatus RowStatus } dnaUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the username for this user account." ::= { dnaUserEntry 1 } dnaUserPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the password in clear text form for this user account. When read, a zero length string will be returned for security reasons. " ::= { dnaUserEntry 2 } dnaUserTargetVlanid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VLAN ID to be assigned for this user account." ::= { dnaUserEntry 3 } dnaUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object manages this user account." ::= { dnaUserEntry 99 } -- Conformanceance dnaMIBCompliances OBJECT IDENTIFIER ::= { dNetAccessAuthMIBConformance 1 } dnaMIBGroups OBJECT IDENTIFIER ::= { dNetAccessAuthMIBConformance 2 } dnaCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement DLINKSW-NETWORK-ACCESS-MIB." MODULE -- this module MANDATORY-GROUPS { dnaAuthPortConfigGroup, dnaPortMethodGroup, dnaSessionGroup, dnaSessionMethodInfoGroup } GROUP dnaMacMoveConfigGroup DESCRIPTION "This group is mandatory in devices which provide MAC move configuration for Network Access Authentication." GROUP dnaAuthzConfigGroup DESCRIPTION "This group is mandatory in devices which provide authorization configuration for Network Access Authentication." GROUP dnaMacFormatGroup DESCRIPTION "This group is mandatory in devices which provide MAC format configuration for Network Access Authentication." GROUP dnaGuestVlanGroup DESCRIPTION "This group is mandatory in devices which provide guest VLAN configuration for Network Access Authentication." GROUP dnaAuthenticationVlanGroup DESCRIPTION "This group is mandatory only for the platform which supports the feature of per VLAN authentication." GROUP dnaMaxAuthedUserLimitGroup DESCRIPTION "This group is mandatory in devices which provide maximum authenticated user for Network Access Authentication." GROUP dnaAccountUserGroup DESCRIPTION "This group is mandatory in devices which provide the feature to terminate authentication session for Network Access Authentication." GROUP dnaSessionTerminateGroup DESCRIPTION "This group is mandatory in devices which provide terminate authentication session for Network Access Authentication." ::= { dnaMIBCompliances 1 } -- Units of Conformanceance dnaAuthPortConfigGroup OBJECT-GROUP OBJECTS { dnaPortAuthHostMode, dnaPortReauthEnabled, dnaPortReauthInterval, dnaPortRestartInterval, dnaPortInactivityTimeout } STATUS current DESCRIPTION "A collection of objects that provides port-specific configuration of Network Access Authentication." ::= { dnaMIBGroups 1 } dnaPortMethodGroup OBJECT-GROUP OBJECTS { dnaPortMethodAvailable, dnaPortMethodCompAuthMode } STATUS current DESCRIPTION "A collection of objects provides authentication methods configuration for Network Access Authentication." ::= { dnaMIBGroups 2 } dnaSessionGroup OBJECT-GROUP OBJECTS { dnaSessionClientMacAddress, dnaSessionClientAddrType, dnaSessionClientAddress, dnaSessionStatus, dnaSessionAuthUserName, dnaSessionAuthorizedBy, dnaSessionAuthVlan, dnaSessionAccountingID, dnaSessionAssignVid, dnaSessionAssignPriority, dnaSessionAssignIngressBandwidth, dnaSessionAssignEgressBandwidth, dnaSessionTimeout, dnaSessionTimeLeft, dnaSessionInactivityTimeout, dnaSessionInactivityTimeLeft } STATUS current DESCRIPTION "A collection of objects that provides authentication session management information for Network Access Authentication." ::= { dnaMIBGroups 3 } dnaSessionMethodInfoGroup OBJECT-GROUP OBJECTS { dnaSessionMethodState } STATUS current DESCRIPTION "A collection of objects that provides authentication session state information per authentication methods." ::= { dnaMIBGroups 4 } dnaMacMoveConfigGroup OBJECT-GROUP OBJECTS { dnaMacMoveMode } STATUS current DESCRIPTION "A collection of objects providing MAC move configuration for Network Access Authentication on the device." ::= { dnaMIBGroups 5 } dnaAuthzConfigGroup OBJECT-GROUP OBJECTS { dnaAuthorizationEnabled } STATUS current DESCRIPTION "A collection of objects provides authorization configuration for Network Access Authentication on the device." ::= { dnaMIBGroups 6 } dnaMacFormatGroup OBJECT-GROUP OBJECTS { dnaMacFormatCase, dnaMacFormatDelimiter, dnaMacFormatDelimiterNumber } STATUS current DESCRIPTION "A collection of objects provides MAC format configuration for Network Access Authentication on the device." ::= { dnaMIBGroups 7 } dnaMaxAuthedUserLimitGroup OBJECT-GROUP OBJECTS { dnaMaxAuthedUserLimit, dnaPortMaxAuthedUserLimit } STATUS current DESCRIPTION "A collection of objects provides configuration of upper limits for authenticated user." ::= { dnaMIBGroups 8 } dnaGuestVlanGroup OBJECT-GROUP OBJECTS { dnaPortGuestVlanid } STATUS current DESCRIPTION "A collection of objects providing guest VLAN configuration for Network Access Authentication on the device." ::= { dnaMIBGroups 9 } dnaAuthenticationVlanGroup OBJECT-GROUP OBJECTS { dnaPortAuthVlansFirst2K, dnaPortAuthVlansSecond2K } STATUS current DESCRIPTION "A collection of objects provides for the platform which supports the feature of per VLAN authentication." ::= { dnaMIBGroups 10 } dnaSessionTerminateGroup OBJECT-GROUP OBJECTS { dnaSessionTerminateSession, dnaSessionTerminateIfMethodList, dnaSessionTerminateMethod, dnaSessionTerminateAll } STATUS current DESCRIPTION "A collection of objects providing terminate authentication session information for Network Access Authentication on the device." ::= { dnaMIBGroups 11 } dnaAccountUserGroup OBJECT-GROUP OBJECTS { dnaUserPassword, dnaUserTargetVlanid, dnaUserRowStatus } STATUS current DESCRIPTION "A collection of objects providing local account information for Network Access Authentication on the device." ::= { dnaMIBGroups 12 } END