EQUIPMENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI DateAndTime, TruthValue ,DisplayString,RowStatus FROM SNMPv2-TC PortList FROM Q-BRIDGE-MIB swTimeRangeMgmtRangeName FROM TIMERANGE-MIB AgentNotifyLevel, dlink-common-mgmt FROM DLINK-ID-REC-MIB; swEquipmentMIB MODULE-IDENTITY LAST-UPDATED "201104200000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION " equipments MIB." ::= { dlink-common-mgmt 11 } MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order, copy from RFC1493 -- ----------------------------------------------------------------------------- -- OID Tree Allocation -- ----------------------------------------------------------------------------- swEquipment OBJECT IDENTIFIER ::= { swEquipmentMIB 1 } swEquipmentNotify OBJECT IDENTIFIER ::= { swEquipmentMIB 2 } -- ----------------------------------------------------------------------------- -- Object Definition -- ----------------------------------------------------------------------------- swEquipmentCapacity OBJECT-TYPE SYNTAX BITS { fanCapable(0), -- redundantPowerCapable(1), -- tempteratureDetection(2), stackingCapable(3), chassisCapable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the equipment capability supported in the system." ::= { swEquipment 1 } -- ----------------------------------------------------------------------------- swFanTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the fan warning event trap state." ::= { swEquipment 4 } swPowerTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the power warning event trap state." ::= { swEquipment 5 } swPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF SwPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of power information values." ::= { swEquipment 6 } swPowerEntry OBJECT-TYPE SYNTAX SwPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of power information values." INDEX { swPowerUnitIndex , swPowerID} ::= { swPowerTable 1 } SwPowerEntry ::= SEQUENCE { swPowerUnitIndex INTEGER, swPowerID INTEGER, swPowerStatus INTEGER } swPowerUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the unit ID in the System." ::= { swPowerEntry 1 } swPowerID OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the power 1 : main power 2 : redundant power ." ::= { swPowerEntry 2 } swPowerStatus OBJECT-TYPE SYNTAX INTEGER { other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current power status. lowVoltage : The voltage of the power unit is too low. overCurrent: The current of the power unit is too high. working : The power unit is working normally. fail : The power unit has failed. connect : The power unit is connected but not powered on. disconnect : The power unit is not connected." ::= { swPowerEntry 3 } -- ----------------------------------------------------------------------------- swFanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of fan information values." ::= { swEquipment 7 } swFanEntry OBJECT-TYPE SYNTAX SwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of fan information values." INDEX { swFanUnitIndex, swFanID} ::= { swFanTable 1 } SwFanEntry ::= SEQUENCE { swFanUnitIndex INTEGER, swFanID INTEGER, swFanStatus INTEGER, swFanPostion INTEGER, swFanNumber INTEGER, swFanSpeed INTEGER } swFanUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the unit ID in the System." ::= { swFanEntry 1 } swFanID OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the unit ID." ::= { swFanEntry 2 } swFanStatus OBJECT-TYPE SYNTAX INTEGER { other(0), working(1), fail(2), speed-0(3), speed-low(4), speed-middle(5), speed-high(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current fan status. speed-0 : If the fan function is normal and the fan does not spin due to the temperature not reaching the threshold, the status of the fan is speed 0. speed-low : Fan spin using the lowest speed. speed-middle: Fan spin using the middle speed. speed-high : Fan spin using the highest speed." ::= { swFanEntry 3 } swFanPostion OBJECT-TYPE SYNTAX INTEGER { other(1), left(2), right(3), back(4), cpu(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the position of the fan." ::= { swFanEntry 4 } swFanNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the fan number." ::= { swFanEntry 5 } swFanSpeed OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the fan work speed(RPM)." ::= { swFanEntry 6 } -- ----------------------------------------------------------------------------- swTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF SwTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature values." ::= { swEquipment 8 } swTemperatureEntry OBJECT-TYPE SYNTAX SwTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of temperature values." INDEX { swTemperatureUnitIndex } ::= { swTemperatureTable 1 } SwTemperatureEntry ::= SEQUENCE { swTemperatureUnitIndex INTEGER, swTemperatureCurrent INTEGER, swTemperatureHighThresh INTEGER, swTemperatureLowThresh INTEGER } swTemperatureUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the unit ID in the System." ::= { swTemperatureEntry 1 } swTemperatureCurrent OBJECT-TYPE SYNTAX INTEGER(-500..500) MAX-ACCESS read-only STATUS current DESCRIPTION "The shelf current temperature." ::= { swTemperatureEntry 2 } swTemperatureHighThresh OBJECT-TYPE SYNTAX INTEGER (-500..500) MAX-ACCESS read-write STATUS current DESCRIPTION "The high threshold of shelf temperature." ::= { swTemperatureEntry 3 } swTemperatureLowThresh OBJECT-TYPE SYNTAX INTEGER(-500..500) MAX-ACCESS read-write STATUS current DESCRIPTION "The low threshold of shelf temperature." ::= { swTemperatureEntry 4 } -- ----------------------------------------------------------------------------- swUnitMgmt OBJECT IDENTIFIER ::= { swEquipment 9 } swUnitStackingVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the version of this stacking system." ::= { swUnitMgmt 1 } swUnitMaxSupportedUnits OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of units that are supported in the system." ::= { swUnitMgmt 2 } swUnitNumOfUnit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of units." ::= { swUnitMgmt 3 } swUnitMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF SwUnitMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the unit information." ::= { swUnitMgmt 4 } swUnitMgmtEntry OBJECT-TYPE SYNTAX SwUnitMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of management information for each unit in the system." INDEX { swUnitMgmtId } ::= { swUnitMgmtTable 1 } SwUnitMgmtEntry ::= SEQUENCE { swUnitMgmtId INTEGER, swUnitMgmtMacAddr MacAddress, swUnitMgmtStartPort INTEGER, swUnitMgmtPortRange INTEGER, swUnitMgmtFrontPanelLedStatus OCTET STRING, swUnitMgmtCtrlMode INTEGER, swUnitMgmtCurrentMode INTEGER, swUnitMgmtVersion DisplayString, swUnitMgmtModuleName DisplayString, swUnitMgmtPromVersion DisplayString, swUnitMgmtFirmwareVersion DisplayString, swUnitMgmtHardwareVersion DisplayString, swUnitMgmtPriority INTEGER, swUnitMgmtUserSetState INTEGER, swUnitMgmtExistState INTEGER, swUnitMgmtBoxId INTEGER, swUnitMgmtSerialNumber DisplayString } swUnitMgmtId OBJECT-TYPE SYNTAX INTEGER (1..13) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the specific entry in the stacking/chassis table." ::= { swUnitMgmtEntry 1 } swUnitMgmtMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of this unit." ::= { swUnitMgmtEntry 2 } swUnitMgmtStartPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the starting port of this unit." ::= { swUnitMgmtEntry 3 } swUnitMgmtPortRange OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total ports of this unit." ::= { swUnitMgmtEntry 4 } swUnitMgmtFrontPanelLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a set of system LED indicators. The first four octets are defined as a system LED. The first LED is a power LED. The second LED in the stacking module is a master LED but in the chassis is a status LED. The third LED is a console LED. The fourth LED is an RPS (Redundancy Power Supply) LED. The other octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presented as the link/activity LED. The second byte is presented as the speed LED. system LED: 01 = fail/error/non existence. 02 = work normal. link/activity LED : The most significant bit is used for blinking/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be set to 0. Note: For the DGS-3700, the first five octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. The fourth LED is the management port LED. The fifth LED is the fan LED. For the DGS-3200-10 and DGS-3200-16, the first three octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. For the DGS-3200-24, the first three octets are defined as the system LED, the definition of the first three octets is the same as the DGS-3200-10 and DGS-3200-16, the fourth LED is the SD card LED. The following description is for the SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully." ::= { swUnitMgmtEntry 5 } swUnitMgmtCtrlMode OBJECT-TYPE SYNTAX INTEGER { other(1), auto(2), stand-alone(3), master(4), slave(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the stacking mode the user configured for the unit. This object can only be configured when the device is in standalone mode. other (1) - This object indicates the stacking mode that the user has configured for the unit. This object can only be configured when the device is in standalone mode. auto (2) - The system will auto-assign a stacking role to this unit to be: standalone(3), master(4), or slave(5). standalone (3) - The unit is forced to be in standalone mode. master (4) - The unit is forced to be in master mode. If this unit is selected to be a master, the unit can modify the configuration of the stacking system. slave (5) - The unit is forced to be in slave mode. If this unit is selected to be a slave, it can only view the configuration of the stacking system." ::= { swUnitMgmtEntry 6 } swUnitMgmtCurrentMode OBJECT-TYPE SYNTAX INTEGER { other(1), auto(2), stand-alone(3), master(4), slave(5), backup-master(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current stacking role of this unit." ::= { swUnitMgmtEntry 7 } swUnitMgmtVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the version of this stacking unit." ::= { swUnitMgmtEntry 8 } swUnitMgmtModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing the stacking unit module name. " ::= { swUnitMgmtEntry 9 } swUnitMgmtPromVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing the PROM version of the stacking unit. " ::= { swUnitMgmtEntry 10 } swUnitMgmtFirmwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing the firmware version of the stacking unit. " ::= { swUnitMgmtEntry 11 } swUnitMgmtHardwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing the hardware version of the stacking unit. " ::= { swUnitMgmtEntry 12 } swUnitMgmtPriority OBJECT-TYPE SYNTAX INTEGER(1..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority of the stacking unit. " ::= { swUnitMgmtEntry 13 } swUnitMgmtUserSetState OBJECT-TYPE SYNTAX INTEGER { other(1), auto(2), user(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the user set state of this unit." ::= { swUnitMgmtEntry 14 } swUnitMgmtExistState OBJECT-TYPE SYNTAX INTEGER { exist(1), no-exist(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of existence of this unit." ::= { swUnitMgmtEntry 15 } swUnitMgmtBoxId OBJECT-TYPE SYNTAX INTEGER { box-1(1), box-2(2), box-3(3), box-4(4), box-5(5), box-6(6), box-7(7), box-8(8), box-9(9), box-10(10), box-11(11), box-12(12), auto(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "The box ID of the stacking unit. When show, it shows the current box ID of this unit; When set, it sets the new box ID, and the new box ID will take effect after the next boot." ::= { swUnitMgmtEntry 16 } swUnitMgmtSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A text string containing the serial number of the stacking unit." ::= { swUnitMgmtEntry 17 } swUnitTopology OBJECT-TYPE SYNTAX INTEGER { stand-alone(1), duplex-chain(2), duplex-ring(3), star(4), unstable(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The stacking topology state." ::= { swUnitMgmt 5 } swUnitStackMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the stacking mode supported in the system." ::= { swUnitMgmt 6 } swUnitStackForceMasterRole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the stack force master role mode supported in the system." ::= { swUnitMgmt 7 } swUnitStackTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the stacking trap state." DEFVAL {enabled} ::= { swUnitMgmt 8 } swUnitStackLogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the stacking log state." DEFVAL {enabled} ::= { swUnitMgmt 9 } -- ----------------------------------------------------------------------------- -- swExternalAlarmMgmt -- ----------------------------------------------------------------------------- swExternalAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF SwExternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the status of each of the alarm channels by this agent." ::= { swEquipment 10 } swExternalAlarmEntry OBJECT-TYPE SYNTAX SwExternalAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing objects with the status of each alarm channel." INDEX { swExternalAlarmChannel } ::= { swExternalAlarmTable 1 } SwExternalAlarmEntry ::= SEQUENCE { swExternalAlarmChannel INTEGER, swExternalAlarmMessage DisplayString, swExternalAlarmStatus INTEGER } swExternalAlarmChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the alarm channel." ::= { swExternalAlarmEntry 1 } swExternalAlarmMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated." ::= { swExternalAlarmEntry 2 } swExternalAlarmStatus OBJECT-TYPE SYNTAX INTEGER { alarming(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the current status of each alarm channel." ::= { swExternalAlarmEntry 3 } -- -------------------------------------------------------------------------------- -- swEquipmentPowerSaving -- -------------------------------------------------------------------------------- swEquipmentPowerSaving OBJECT IDENTIFIER ::= { swEquipment 11 } swEquipPowerSavingLinkDetectState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the equipment reduced power consumption state." ::= { swEquipmentPowerSaving 1 } swEquipPowerSavingLenDetect OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the equipment reduced power consumption state with a link partner." ::= { swEquipmentPowerSaving 2 } swEquipPowerSavingHiberState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the power saving state of system hibernation." DEFVAL {disabled} ::= { swEquipmentPowerSaving 3 } swEquipPowerSavingPortLEDState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the power saving state of port LED." DEFVAL {disabled} ::= { swEquipmentPowerSaving 4 } swEquipPowerSavingPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the power saving state of port." DEFVAL {disabled} ::= { swEquipmentPowerSaving 5 } -- ----------------------------------------------------------------------------- swEquipPowerSavingScheduleCtrl OBJECT IDENTIFIER ::= { swEquipmentPowerSaving 6 } -- ----------------------------------------------------------------------------- swEquipPowerSavingHibernationTable OBJECT-TYPE SYNTAX SEQUENCE OF SwEquipPowerSavingHibernationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the system hibernation configurations of the power saving." ::= { swEquipPowerSavingScheduleCtrl 1 } swEquipPowerSavingHibernationEntry OBJECT-TYPE SYNTAX SwEquipPowerSavingHibernationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the system hibernation configurations of the power saving." INDEX { swTimeRangeMgmtRangeName } ::= { swEquipPowerSavingHibernationTable 1 } SwEquipPowerSavingHibernationEntry ::= SEQUENCE { swEquipPowerSavingHiberRowStatus RowStatus } swEquipPowerSavingHiberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swEquipPowerSavingHibernationEntry 100 } -- ----------------------------------------------------------------------------- swEquipPowerSavingPortLedTable OBJECT-TYPE SYNTAX SEQUENCE OF SwEquipPowerSavingPortLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the port LED configurations of the power saving." ::= { swEquipPowerSavingScheduleCtrl 2 } swEquipPowerSavingPortLedEntry OBJECT-TYPE SYNTAX SwEquipPowerSavingPortLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the port LED configurations of the power saving." INDEX { swTimeRangeMgmtRangeName} ::= { swEquipPowerSavingPortLedTable 1 } SwEquipPowerSavingPortLedEntry ::= SEQUENCE { swEquipPowerSavingPortLedRowStatus RowStatus } swEquipPowerSavingPortLedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swEquipPowerSavingPortLedEntry 100 } -- ----------------------------------------------------------------------------- swEquipPowerSavingPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwEquipPowerSavingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the port configurations of the power saving." ::= { swEquipPowerSavingScheduleCtrl 3 } swEquipPowerSavingPortEntry OBJECT-TYPE SYNTAX SwEquipPowerSavingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the port configurations of the power saving." INDEX { swEquipPowerSavingPortIndex, swTimeRangeMgmtRangeName } ::= { swEquipPowerSavingPortTable 1 } SwEquipPowerSavingPortEntry ::= SEQUENCE { swEquipPowerSavingPortIndex INTEGER, swEquipPowerSavingPortRowStatus RowStatus } swEquipPowerSavingPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the module's port number.(1..Max port number in the module)." ::= { swEquipPowerSavingPortEntry 1 } swEquipPowerSavingPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swEquipPowerSavingPortEntry 100 } -- -------------------------------------------------------------------------------- -- swEquipEeeMgmt -- -------------------------------------------------------------------------------- swEquipEeeMgmt OBJECT IDENTIFIER ::= { swEquipmentPowerSaving 20 } swEquipEeeState OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the EEE state of all ports. Note: If the port's bit has a value of '1', specifies the EEE (Energy Efficient Ethernet) state of this port is 'Enabled', otherwise, if the port's bit has a value of '0', specifies the EEE state of this port is 'Disabled'." ::= { swEquipEeeMgmt 1 } -- -------------------------------------------------------------------------------- -- swEquipmentTemperatureCtrl -- -------------------------------------------------------------------------------- swEquipmentTemperatureCtrl OBJECT IDENTIFIER ::= { swEquipment 12 } swTemperatureTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable the warning temperature trap." ::= { swEquipmentTemperatureCtrl 1 } swTemperatureLogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable the warning temperature log." ::= { swEquipmentTemperatureCtrl 2 } -- ----------------------------------------------------------------------------- -- swEquipmentLEDCtrl OBJECT IDENTIFIER ::= { swEquipment 13 } -- ----------------------------------------------------------------------------- swEquipmentLEDCtrl OBJECT IDENTIFIER ::= { swEquipment 13 } swEquipmentPortLEDState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the LED admin state of all ports." DEFVAL {enabled} ::= { swEquipmentLEDCtrl 1 } -- ----------------------------------------------------------------------------- -- swExternalAlarmStackingMgmt -- ----------------------------------------------------------------------------- swExternalAlarmStackingTable OBJECT-TYPE SYNTAX SEQUENCE OF SwExternalAlarmStackingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the status of each of the alarm channels by this agent." ::= { swEquipment 15 } swExternalAlarmStackingEntry OBJECT-TYPE SYNTAX SwExternalAlarmStackingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing objects with the status of each alarm channel." INDEX { swExternalAlarmStackingUnitIndex, swExternalAlarmStackingChannel } ::= { swExternalAlarmStackingTable 1 } SwExternalAlarmStackingEntry ::= SEQUENCE { swExternalAlarmStackingUnitIndex INTEGER, swExternalAlarmStackingChannel INTEGER, swExternalAlarmStackingMessage DisplayString, swExternalAlarmStackingStatus INTEGER } swExternalAlarmStackingUnitIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the unit ID in the System.." ::= { swExternalAlarmStackingEntry 1 } swExternalAlarmStackingChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of the alarm channel." ::= { swExternalAlarmStackingEntry 2 } swExternalAlarmStackingMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated." ::= { swExternalAlarmStackingEntry 3 } swExternalAlarmStackingStatus OBJECT-TYPE SYNTAX INTEGER { alarming(1), normal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the current status of each alarm channel." ::= { swExternalAlarmStackingEntry 4 } -- ----------------------------------------------------------------------------- swEquipmentNotifyMgmt OBJECT IDENTIFIER ::= { swEquipmentNotify 1 } swEquipmentNotification OBJECT IDENTIFIER ::= { swEquipmentNotify 2 } swEquipUnitNotification OBJECT IDENTIFIER ::= { swEquipmentNotification 1 } swEquipPowerNotification OBJECT IDENTIFIER ::= { swEquipmentNotification 2 } swEquipFanNotification OBJECT IDENTIFIER ::= { swEquipmentNotification 3 } swEquipTemperatureNotification OBJECT IDENTIFIER ::= { swEquipmentNotification 4 } swEquipExternalAlarmNotification OBJECT IDENTIFIER ::= { swEquipmentNotification 5 } swEquipUnitNotifyMgmt OBJECT IDENTIFIER ::= { swEquipmentNotifyMgmt 1 } swEquipPowerNotifyMgmt OBJECT IDENTIFIER ::= { swEquipmentNotifyMgmt 2 } swEquipFanNotifyMgmt OBJECT IDENTIFIER ::= { swEquipmentNotifyMgmt 3 } swEquipTemperatureNotifyMgmt OBJECT IDENTIFIER ::= { swEquipmentNotifyMgmt 4 } -- ----------------------------------------------------------------------------- swUnitInsertSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swUnitInsert detection level." ::= { swEquipUnitNotifyMgmt 1 } swUnitRemoveSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swUnitRemove detection level." ::= { swEquipUnitNotifyMgmt 2 } swUnitFailureSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swUnitFailure detection level." ::= { swEquipUnitNotifyMgmt 3 } -- ----------------------------------------------------------------------------- swPowerStatusChgSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swPowerStatusChg detection level." ::= { swEquipPowerNotifyMgmt 1 } swPowerFailureSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swPowerFailure detection level." ::= { swEquipPowerNotifyMgmt 2 } swPowerRecoverSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swPowerRecover detection level." ::= { swEquipPowerNotifyMgmt 3 } -- ----------------------------------------------------------------------------- swFanFailureSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swFanFailure detection level." ::= { swEquipFanNotifyMgmt 1 } swFanRecoverSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swFanRecover detection level." ::= { swEquipFanNotifyMgmt 2 } -- ----------------------------------------------------------------------------- swHighTemperatureSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swHighTemperature detection level." ::= { swEquipTemperatureNotifyMgmt 1 } swHighTemperatureRecoverSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swHighTemperatureRecover detection level." ::= { swEquipTemperatureNotifyMgmt 2 } swLowTemperatureSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swLowTemperature detection level." ::= { swEquipTemperatureNotifyMgmt 3 } swLowTemperatureRecoverSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the swLowTemperatureRecover detection level." ::= { swEquipTemperatureNotifyMgmt 4 } -- ----------------------------------------------------------------------------- swEquipUnitNotifyPrefix OBJECT IDENTIFIER ::= { swEquipUnitNotification 0 } swUnitInsert NOTIFICATION-TYPE OBJECTS { swUnitMgmtId, swUnitMgmtMacAddr } STATUS current DESCRIPTION "Unit Hot Insert notification." ::= { swEquipUnitNotifyPrefix 1 } swUnitRemove NOTIFICATION-TYPE OBJECTS { swUnitMgmtId, swUnitMgmtMacAddr } STATUS current DESCRIPTION "Unit Hot Remove notification." ::= { swEquipUnitNotifyPrefix 2 } swUnitFailure NOTIFICATION-TYPE OBJECTS { swUnitMgmtId } STATUS current DESCRIPTION "Unit Failure notification." ::= { swEquipUnitNotifyPrefix 3 } swUnitTPChange NOTIFICATION-TYPE OBJECTS { swStackTopologyType, swUnitMgmtId, swUnitMgmtMacAddr } STATUS current DESCRIPTION "The stacking topology change notification." ::= { swEquipUnitNotifyPrefix 4 } swUnitRoleChange NOTIFICATION-TYPE OBJECTS { swStackRoleChangeType, swUnitMgmtId } STATUS current DESCRIPTION "The stacking unit role change notification." ::= { swEquipUnitNotifyPrefix 5 } -- ----------------------------------------------------------------------------- swEquipPowerNotifyPerfix OBJECT IDENTIFIER ::= { swEquipPowerNotification 0 } swPowerStatusChg NOTIFICATION-TYPE OBJECTS { swPowerUnitIndex, swPowerID, swPowerStatus } STATUS current DESCRIPTION "Power Status change notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> overCurrent. lowVoltage -> working. lowVoltage -> disconnect. lowVoltage -> connect. overCurrent -> lowVoltage. overCurrent -> working. overCurrent -> disconnect. overCurrent -> connect. working -> lowVoltage. working -> overCurrent. working -> connect. working -> disconnect. fail -> connect. fail -> disconnect. connect -> lowVoltage. connect -> overCurrent. connect -> working. connect -> disconnect. disconnect -> lowVoltage. disconnect -> overCurrent. disconnect -> working. disconnect -> connect." ::= { swEquipPowerNotifyPerfix 1 } swPowerFailure NOTIFICATION-TYPE OBJECTS { swPowerUnitIndex, swPowerID, swPowerStatus } STATUS current DESCRIPTION "Power Failure notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> fail. overCurrent -> fail. working -> fail. connect -> fail. disconnect -> fail." ::= { swEquipPowerNotifyPerfix 2 } swPowerRecover NOTIFICATION-TYPE OBJECTS {swPowerUnitIndex, swPowerID, swPowerStatus } STATUS current DESCRIPTION "Power Recover notification. The notification is issued when the swPowerStatus changes in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> working." ::= { swEquipPowerNotifyPerfix 3 } -- ----------------------------------------------------------------------------- swEquipFanNotifyPrefix OBJECT IDENTIFIER ::= { swEquipFanNotification 0 } swFanFailure NOTIFICATION-TYPE OBJECTS { swFanUnitIndex, swFanID } STATUS current DESCRIPTION "Fan Failure notification." ::= { swEquipFanNotifyPrefix 1 } swFanRecover NOTIFICATION-TYPE OBJECTS { swFanUnitIndex, swFanID } STATUS current DESCRIPTION "Fan Recover notification." ::= { swEquipFanNotifyPrefix 2 } -- ----------------------------------------------------------------------------- swEquipTemperatureNotifyPrefix OBJECT IDENTIFIER ::= { swEquipTemperatureNotification 0 } swHighTemperature NOTIFICATION-TYPE OBJECTS { swTemperatureUnitIndex, swTemperSensorID, swTemperatureCurrent } STATUS current DESCRIPTION "High Temperature notification." ::= { swEquipTemperatureNotifyPrefix 1 } swHighTemperatureRecover NOTIFICATION-TYPE OBJECTS { swTemperatureUnitIndex, swTemperSensorID, swTemperatureCurrent } STATUS current DESCRIPTION "High Temperature notification." ::= { swEquipTemperatureNotifyPrefix 2 } swLowTemperature NOTIFICATION-TYPE OBJECTS { swTemperatureUnitIndex, swTemperSensorID, swTemperatureCurrent } STATUS current DESCRIPTION "Low Temperature notification." ::= { swEquipTemperatureNotifyPrefix 3 } swLowTemperatureRecover NOTIFICATION-TYPE OBJECTS { swTemperatureUnitIndex, swTemperSensorID, swTemperatureCurrent } STATUS current DESCRIPTION "Low Temperature notification." ::= { swEquipTemperatureNotifyPrefix 4 } -- ----------------------------------------------------------------------------- swEquipExternalAlarmNotifyPrefix OBJECT IDENTIFIER ::= { swEquipExternalAlarmNotification 0 } swExternalAlarm NOTIFICATION-TYPE OBJECTS { swExternalAlarmChannel, swExternalAlarmMessage } STATUS current DESCRIPTION "The notice of an Alarm in the specified channel." ::= { swEquipExternalAlarmNotifyPrefix 1 } swExternalAlarmStacking NOTIFICATION-TYPE OBJECTS { swExternalAlarmStackingUnitIndex, swExternalAlarmStackingChannel, swExternalAlarmStackingMessage } STATUS current DESCRIPTION "The notice of an Alarm in the specified channel." ::= { swEquipExternalAlarmNotifyPrefix 2 } --- ----------------------------------------------------------------------------- swNotificationBindings OBJECT IDENTIFIER ::= { swEquipmentNotify 3 } --- ----------------------------------------------------------------------------- swEquipTemperNotifyBindings OBJECT IDENTIFIER ::= { swNotificationBindings 1 } swTemperSensorID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the ID of the temperature sensor in the unit." ::= { swEquipTemperNotifyBindings 1 } swEquipUnitNotifyBindings OBJECT IDENTIFIER ::= { swNotificationBindings 2 } swStackTopologyType OBJECT-TYPE SYNTAX INTEGER { chain(1), ring(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the MAC address of the switch." ::= { swEquipUnitNotifyBindings 1 } swStackRoleChangeType OBJECT-TYPE SYNTAX INTEGER { backup-to-master(1), slave-to-master(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the role information of the switch." ::= { swEquipUnitNotifyBindings 2 } END