-- File Name : DRAGONWAVE-HCP-MIB.mib -- Version : 1.3.10 -- Date : December, 2015 -- Author : DragonWave Inc. DRAGONWAVE-HCP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Counter32, Counter64, Unsigned32, IpAddress, Integer32 FROM SNMPv2-SMI RowStatus, DateAndTime, DisplayString FROM SNMPv2-TC ifIndex FROM RFC1213-MIB horizon FROM HORIZON-MIB horizonEquipmentOutTrapsCounter FROM HORIZON-EQUIPMENT-LOG-MIB InetAddressPrefixLength, InetAddress, InetAddressType FROM INET-ADDRESS-MIB; hzCpModIdentity MODULE-IDENTITY LAST-UPDATED "201403281023Z" ORGANIZATION "Dragonwave Inc." CONTACT-INFO "http://www.dragonwaveinc.com 600-411 Legget Drive Ottawa, Ontario Canada, K2K 3C9 Tel : 613-599-9991 Fax: 613-599-4265 Support: 613-271-7010" DESCRIPTION "This specifies the contact information and the revision tracking information for the MIB module version." REVISION "201301171109Z" DESCRIPTION "The MIB module for Dragonwave HCP product." REVISION "201403281028Z" DESCRIPTION "Added PM Rspi Threshold table." REVISION "201411241712Z" DESCRIPTION "Added support for IPv6 auto discovery. Added PM Adv Threshold table." REVISION "201512101712Z" DESCRIPTION "Added a new hzCpConfigChanged trap." ::= { horizonCompactPlus 1000 } -- Important!! For HP OpenView, the following OID definition for ISO must be commented out, -- otherwise it won't compile. HP openView has already defined ISO. -- iso OBJECT IDENTIFIER ::= { 1 } horizonCompactPlus OBJECT IDENTIFIER ::= { horizon 5 } -- -- Node definitions -- hzCpSystem OBJECT IDENTIFIER ::= { horizonCompactPlus 1 } -- ------------- -- hzCpSystem -- ------------- hzCpSysGeneral OBJECT IDENTIFIER ::= { hzCpSystem 1 } hzCpSysSpeed OBJECT IDENTIFIER ::= { hzCpSystem 2 } hzCpSysUpgradeSpeed OBJECT IDENTIFIER ::= { hzCpSysSpeed 3 } hzCpSysDowngradeSpeed OBJECT IDENTIFIER ::= { hzCpSysSpeed 4 } hzCpInventory OBJECT IDENTIFIER ::= { hzCpSystem 3 } -- ---------------------------- -- hzCpInventory -- ---------------------------- hzCpHwInventory OBJECT IDENTIFIER ::= { hzCpInventory 1 } hzCpSwInventory OBJECT IDENTIFIER ::= { hzCpInventory 2 } hzCpPeerSysInfo OBJECT IDENTIFIER ::= { hzCpSystem 4 } hzCpSysRedundancy OBJECT IDENTIFIER ::= { hzCpSystem 5 } hzCpRedundancyLinkSwitchParameters OBJECT IDENTIFIER ::= { hzCpSysRedundancy 6 } hzCpRedundancyLinkMonitorParameters OBJECT IDENTIFIER ::= { hzCpSysRedundancy 7 } hzCpPartnerSysInfo OBJECT IDENTIFIER ::= { hzCpSysRedundancy 8 } hzCpPeerPartnerSysInfo OBJECT IDENTIFIER ::= { hzCpSysRedundancy 9 } hzCpPartnerCommunication OBJECT IDENTIFIER ::= { hzCpSysRedundancy 10 } hzCpRedundancyStatus OBJECT IDENTIFIER ::= { hzCpSysRedundancy 11 } hzCpSysDiagnostics OBJECT IDENTIFIER ::= { hzCpSystem 6 } -- ------------- -- hzCpSysDiagnostics -- ------------- hzCpLoopback OBJECT IDENTIFIER ::= { hzCpSysDiagnostics 1 } hzCpHitlessAamDiagnostics OBJECT IDENTIFIER ::= { hzCpSysDiagnostics 2 } hzCpSysLicensedFeatureGroups OBJECT IDENTIFIER ::= { hzCpSystem 7 } hzCpPeerAuthentication OBJECT IDENTIFIER ::= { hzCpSystem 8 } hzCpCalendar OBJECT IDENTIFIER ::= { hzCpSystem 9 } hzCpSntp OBJECT IDENTIFIER ::= { hzCpSystem 10 } hzCpSyncE OBJECT IDENTIFIER ::= { hzCpSystem 11 } hzCpBac OBJECT IDENTIFIER ::= { hzCpSystem 12 } hzCpEcfmVsm OBJECT IDENTIFIER ::= { hzCpSystem 13 } hzCpBandwidthVsm OBJECT IDENTIFIER ::= { hzCpEcfmVsm 1 } hzCpPM OBJECT IDENTIFIER ::= { hzCpSystem 14 } hzCpManagement OBJECT IDENTIFIER ::= { horizonCompactPlus 2 } hzCpNetworkManagementInterface OBJECT IDENTIFIER ::= { hzCpManagement 4 } hzCpNetMgmtInterfaceVlan OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 1 } hzCpNetMgmtIpv4 OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 2 } -- Reserved hzCpNetMgmttIpv6 OBJECT IDENTIFIER ::= { hzCpNetworkManagementInterface 3 } hzCpSnmp OBJECT IDENTIFIER ::= { hzCpManagement 5 } hzCpTrapConfig OBJECT IDENTIFIER ::= { hzCpManagement 6 } -- ---------------------------- -- TRAP ENABLE -- ---------------------------- hzCpTrapEnable OBJECT IDENTIFIER ::= { hzCpTrapConfig 3 } hzCpRadius OBJECT IDENTIFIER ::= { hzCpManagement 7 } hzCpManagementSessions OBJECT IDENTIFIER ::= { hzCpManagement 8 } hzCpHttp OBJECT IDENTIFIER ::= { hzCpManagement 9 } hzCpHttpSecure OBJECT IDENTIFIER ::= { hzCpHttp 2 } hzCpNetworkInterface OBJECT IDENTIFIER ::= { horizonCompactPlus 3 } hzCpEnetPort OBJECT IDENTIFIER ::= { hzCpNetworkInterface 1 } hzCpEnetAggregatedStats OBJECT IDENTIFIER ::= { hzCpEnetPort 4 } hzCpEnetAggregatedLcStats OBJECT IDENTIFIER ::= { hzCpEnetPort 6 } hzCpWirelessInterface OBJECT IDENTIFIER ::= { horizonCompactPlus 4 } -- ---------------------------- -- hzCpWirelessInterface -- ---------------------------- hzCpWirelessInterfaceNames OBJECT IDENTIFIER ::= { hzCpWirelessInterface 1 } hzCpWirelessInterfaceModems OBJECT IDENTIFIER ::= { hzCpWirelessInterface 2 } hzCpWirelessAggregateStats OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceModems 3 } hzCpWirelessAggregateLcStats OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceModems 5 } -- hzCpWirelessInterfaceIF OBJECT IDENTIFIER ::= { hzCpWirelessInterface 3 } hzCpWirelessInterfaceRadios OBJECT IDENTIFIER ::= { hzCpWirelessInterface 4 } hzCpWirelessInterfaceRadioFrequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterface 5 } hzCpWirelessInterfaceRadio1Frequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadioFrequencies 1 } -- -------------------------------------- -- hzCpWirelessInterfaceRadioFrequencies -- -------------------------------------- hzCpRadio1ProgrammedFrequency OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadio1Frequencies 4 } -- hzCpWirelessInterfaceRadio2Frequencies OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadioFrequencies 2 } -- hzCpRadio2ProgrammedFrequency OBJECT IDENTIFIER ::= { hzCpWirelessInterfaceRadio2Frequencies 5 } hzCpWirelessInterfaceAntenna OBJECT IDENTIFIER ::= { hzCpWirelessInterface 6 } hzCpAlarms OBJECT IDENTIFIER ::= { horizonCompactPlus 5 } hzCpThresholdAlarmConfig OBJECT IDENTIFIER ::= { hzCpAlarms 1 } -- -- hzCpThresholdAlarmConfig -- hzCpAggregatedThresholdAlarm OBJECT IDENTIFIER ::= { hzCpThresholdAlarmConfig 1 } hzCpQBasedThresholdAlarm OBJECT IDENTIFIER ::= { hzCpThresholdAlarmConfig 2 } hzCpQos OBJECT IDENTIFIER ::= { horizonCompactPlus 6 } hzCpRapidLinkShutdown OBJECT IDENTIFIER ::= { horizonCompactPlus 7 } hzCpLogs OBJECT IDENTIFIER ::= { horizonCompactPlus 8 } hzCpSysLog OBJECT IDENTIFIER ::= { hzCpLogs 4 } hzCpAtpc OBJECT IDENTIFIER ::= { horizonCompactPlus 9 } hzCpHitlessAam OBJECT IDENTIFIER ::= { horizonCompactPlus 10 } hzCpSnmpNotifications OBJECT IDENTIFIER ::= { horizonCompactPlus 11 } -- ---------------------------- -- hzCpGeneral -- ---------------------------- hzCpResetSystem OBJECT-TYPE SYNTAX INTEGER { reset (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Writing '1' to this object resets the system." ::= { hzCpSysGeneral 1 } hzCpSaveMIB OBJECT-TYPE SYNTAX INTEGER { save (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Writing '1' or 'save' to this object save all MIB values." ::= { hzCpSysGeneral 2 } hzCpOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), testing (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the system. Testing indicates that no operational packets can be passed." ::= { hzCpSysGeneral 3 } -- ---------------------------- -- hzCpSysSpeed -- ---------------------------- hzCpSystemCurrentSpeed OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Changes the working speed of the system." ::= { hzCpSysSpeed 1 } hzCpSystemLicensedSpeed OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps." ::= { hzCpSysSpeed 2 } -- ---------------------------- -- hzCpSysUpgradeSpeed -- ---------------------------- hzCpLicensedSpeedUpgradeSpeedAndKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enter your key here along with the maximum speed for that key to upgrade the system speed. Format: [speed] [key] Example: 800 abc123" ::= { hzCpSysUpgradeSpeed 1 } hzCpLicensedSpeedCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system." ::= { hzCpSysUpgradeSpeed 2 } -- ---------------------------- -- hzQtmSysDowngradeSpeed -- ---------------------------- hzCpLicensedSpeedDowngradeSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reduce your licensed speed by entering a speed to this object and take note of the generated key in hzCpLicensedSpeedConfirmationKey. Format: [speed] Example: 200" ::= { hzCpSysDowngradeSpeed 1 } hzCpLicensedSpeedCountUsedForKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system." ::= { hzCpSysDowngradeSpeed 2 } hzCpLicensedSpeedConfirmationKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object will show a 'key' after successfully downgrading the license speed." ::= { hzCpSysDowngradeSpeed 3 } hzCpSysDowngradeSpeedDecrement OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the difference for the dropped speed." ::= { hzCpSysDowngradeSpeed 4 } -- ---------------------------- -- hzCpHwInventory -- ---------------------------- hzCpFrequencyFilePartNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Part Number of the Frequency File" ::= { hzCpHwInventory 1 } hzCpUnitSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Serial Number of the Unit." ::= { hzCpHwInventory 2 } hzCpUnitAssemblyNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing the Assembly Number of the Unit." ::= { hzCpHwInventory 3 } hzCpModemSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Serial no of the Modem." ::= { hzCpHwInventory 4 } hzCpModemAssemblyNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing assembly no of the Modem." ::= { hzCpHwInventory 5 } hzCpPsuSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Serial no of the PSU." ::= { hzCpHwInventory 6 } hzCpPsuAssemblyNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing assembly no of the PSU." ::= { hzCpHwInventory 7 } hzCpRfSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Serial no of the RF." ::= { hzCpHwInventory 8 } hzCpRfAssemblyNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing assembly no of the RF." ::= { hzCpHwInventory 9 } hzCpDiplexerSerialNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing Serial no of the Diplexer." ::= { hzCpHwInventory 10 } hzCpDiplexerAssemblyNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing assembly no of the Diplexer." ::= { hzCpHwInventory 11 } hzCpSystemCleiNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing system CLEI code." ::= { hzCpHwInventory 12 } -- ---------------------------- -- hzCpSwInventory -- ---------------------------- hzCpSwInventoryTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSwInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains the software inventory." ::= { hzCpSwInventory 1 } hzCpSwInventoryEntry OBJECT-TYPE SYNTAX HzCpSwInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Software inventory entry." INDEX { hzCpSwInvBank } ::= { hzCpSwInventoryTable 1 } HzCpSwInventoryEntry ::= SEQUENCE { hzCpSwInvBank INTEGER, hzCpSwInvStatus INTEGER, hzCpSwInvOmniRelease DisplayString, hzCpSwInvFrequencyFileVersion DisplayString, hzCpSwInvMibVersion DisplayString, hzCpSwInvBootloaderVersion DisplayString } hzCpSwInvBank OBJECT-TYPE SYNTAX INTEGER { bank-A (1), bank-B (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Software bank in the flash. " ::= { hzCpSwInventoryEntry 1 } hzCpSwInvStatus OBJECT-TYPE SYNTAX INTEGER { active (1), standby (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Software bank status. " ::= { hzCpSwInventoryEntry 2 } hzCpSwInvOmniRelease OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the Omni." ::= { hzCpSwInventoryEntry 3 } hzCpSwInvFrequencyFileVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the frequency file." ::= { hzCpSwInventoryEntry 4 } hzCpSwInvMibVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the system MIB." ::= { hzCpSwInventoryEntry 5 } hzCpSwInvBootloaderVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the bootloader." ::= { hzCpSwInventoryEntry 6 } -- ---------------------- -- hzCpPeerSysInfo -- --------------------- hzCpPeerMacAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address of the peer network interface card." ::= { hzCpPeerSysInfo 1 } hzCpPeerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the peer network interface card." ::= { hzCpPeerSysInfo 2 } hzCpPeerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask for the peer network interface card." ::= { hzCpPeerSysInfo 3 } hzCpPeerDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway address of the peer node." ::= { hzCpPeerSysInfo 4 } hzCpPeerIpv6Prefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IPv6 prefix." ::= { hzCpPeerSysInfo 5 } hzCpPeerIpv6Domain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IPv6 domain." ::= { hzCpPeerSysInfo 6 } hzCpPeerIpv6Address OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IPv6 address." ::= { hzCpPeerSysInfo 7 } hzCpPeerIpv6GatewayDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IPv6 gateway domain." ::= { hzCpPeerSysInfo 8 } hzCpPeerIpv6GatewayAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IPv6 gateway address." ::= { hzCpPeerSysInfo 9 } -- ---------------------------- -- hzCpSysRedundancy -- ---------------------------- hzCpRedundancyMode OBJECT-TYPE SYNTAX INTEGER { off (1), primary-hsb (2), secondary-hsb (3), primary-x2 (4), secondary-x2 (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "allows the user to set system redundancy mode: [ off | primary-hsb | secondary-hsb | primary-x2 | secondary-x2 ]" ::= { hzCpSysRedundancy 1 } hzCpRedundancySwitchMode OBJECT-TYPE SYNTAX INTEGER { auto (1), force-active (2), force-standby (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to override the active link. User can force the link to stay on either force-active, force-standby, auto or manual." ::= { hzCpSysRedundancy 2 } hzCpRedundancyStandbyEnetState OBJECT-TYPE SYNTAX INTEGER { off (1), on (2), pulse (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to set standby payload port state." ::= { hzCpSysRedundancy 3 } hzCpRedundancyStateSwitch OBJECT-TYPE SYNTAX INTEGER { on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to switch redundancy state." ::= { hzCpSysRedundancy 4 } hzCpRedundancyMgmtSource OBJECT-TYPE SYNTAX INTEGER { local-node (1), active-node (2), standby-node (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to local-node, each node is managed locally through specified management interface. When set to standby-node, the management traffic for the partner is processed through the standby node interface." ::= { hzCpSysRedundancy 5 } hzCpRedundancyPrimaryTimeInActiveState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time, in miliseconds, given to the primary unit to establish a link once it becomes active." ::= { hzCpRedundancyLinkSwitchParameters 1 } hzCpRedundancyPrimarySwitchErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percent of allowed bad blocks, on the primary unit, needed to establish a link." ::= { hzCpRedundancyLinkSwitchParameters 2 } hzCpRedundancySecondaryTimeInActiveState OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time, in miliseconds, given to the secondary unit to establish a link once it becomes active." ::= { hzCpRedundancyLinkSwitchParameters 3 } hzCpRedundancySecondarySwitchErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percent of allowed bad blocks, on the secondary unit, needed to establish a link." ::= { hzCpRedundancyLinkSwitchParameters 4 } hzCpRedundancyFaultPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The period of time, in milliseconds, for which the Fault Threshold is applied." ::= { hzCpRedundancyLinkMonitorParameters 1 } hzCpRedundancyFaultThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum percentage of the bad blocks allowed in specified Fault Sample Period to maintain link when in active state." ::= { hzCpRedundancyLinkMonitorParameters 2 } hzCpPartnerMacAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address of the partner node." ::= { hzCpPartnerSysInfo 1 } hzCpPartnerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the partner node." ::= { hzCpPartnerSysInfo 2 } hzCpPartnerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask for the partner node." ::= { hzCpPartnerSysInfo 3 } hzCpPartnerDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway address of the partner node." ::= { hzCpPartnerSysInfo 4 } hzCpPartnerIpv6Prefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix of the partner node." ::= { hzCpPartnerSysInfo 5 } hzCpPartnerIpv6Domain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 domain of the partner node." ::= { hzCpPartnerSysInfo 6 } hzCpPartnerIpv6Address OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the partner node." ::= { hzCpPartnerSysInfo 7 } hzCpPartnerIpv6GatewayDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 gateway domain of the partner node." ::= { hzCpPartnerSysInfo 8 } hzCpPartnerIpv6GatewayAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 gateway address of the partner node." ::= { hzCpPartnerSysInfo 9 } hzCpPeerPartnerMacAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 1 } hzCpPeerPartnerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 2 } hzCpPeerPartnerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask for the partner's peer node." ::= { hzCpPeerPartnerSysInfo 3 } hzCpPeerPartnerDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway address of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 4 } hzCpPeerPartnerIpv6Prefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 5 } hzCpPeerPartnerIpv6Domain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 domain of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 6 } hzCpPeerPartnerIpv6Address OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 7 } hzCpPeerPartnerIpv6GatewayDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 gateway domain of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 8 } hzCpPeerPartnerIpv6GatewayAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 gateway address of the partner's peer node." ::= { hzCpPeerPartnerSysInfo 9 } hzCpPartnerAutoDiscovery OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disables or enables the partner's auto discovery." ::= { hzCpPartnerCommunication 1 } hzCpPartnerMacAddressOverride OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC Address for partner to be used when the auto discovery is disabled." ::= { hzCpPartnerCommunication 2 } hzCpPartnerVlanTagging OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disables or enables the VLAN tagging for partner's communication. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to." ::= { hzCpPartnerCommunication 3 } hzCpPartnerVlanTagId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN Tag Id (1...4095) for partner's communication." ::= { hzCpPartnerCommunication 4 } hzCpPartnerVlanTagPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The priority for VLAN tagging (0...7) for partner's communication." ::= { hzCpPartnerCommunication 5 } hzCpRedundancyUserTrafficStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the redundancy user traffic status." ::= { hzCpRedundancyStatus 1 } hzCpRedundancyWirelessLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the redundancy wireless link status." ::= { hzCpRedundancyStatus 2 } hzCpRedundancyEnetCrossLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the redundancy ethernet cross link status. Primary node is active and processing user traffic at one end of the link, and secondary node is active at the other end of the link resulting in end to end cross connection to user network equipment." ::= { hzCpRedundancyStatus 3 } hzCpRedundancyPortGroupStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the redundancy port group status." ::= { hzCpRedundancyStatus 4 } -- ---------------------------- -- hzCpLoopback -- ---------------------------- hzCpLoopbackType OBJECT-TYPE SYNTAX INTEGER { off (1), radioNonNetwork (2), radioNetwork (3), networkNearEnd (4), networkFarEnd (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "What the user sets is cached until the loopback is started. The get returns the running status of the active loopback type. " ::= { hzCpLoopback 1 } hzCpLoopbackTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The loopback timeout period." ::= { hzCpLoopback 2 } hzCpLoopbackNetworkMac OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for network loopback." ::= { hzCpLoopback 3 } hzCpLoopbackNetworkQueue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The user queue used for far-end network loopback." ::= { hzCpLoopback 4 } hzCpLoopbackNetworkPort OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The user enet port used for network loopback." ::= { hzCpLoopback 5 } hzCpLoopbackStart OBJECT-TYPE SYNTAX INTEGER { start (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Start the loopback by writing '1' to this object." ::= { hzCpLoopback 6 } hzCpLoopbackStop OBJECT-TYPE SYNTAX INTEGER { stop (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Stop the loopback by writing '1' to this object." ::= { hzCpLoopback 7 } -- ---------------------------- -- hzCpHitlessAamDiagnostics -- ---------------------------- hzCpHitlessAamModemTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpHitlessAamModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Modems" ::= { hzCpHitlessAamDiagnostics 1 } hzCpHitlessAamModemEntry OBJECT-TYPE SYNTAX HzCpHitlessAamModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Wireless Interface Modem" INDEX { hzCpHitlessAamModemIndex } ::= { hzCpHitlessAamModemTable 1 } HzCpHitlessAamModemEntry ::= SEQUENCE { hzCpHitlessAamModemIndex INTEGER, hzCpHitlessAamModemDiagnose INTEGER, hzCpHitlessAamModemDiagnosticResult DisplayString } hzCpHitlessAamModemIndex OBJECT-TYPE SYNTAX INTEGER { modem-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpHitlessAamModemEntry 1 } hzCpHitlessAamModemDiagnose OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem. Poll the hzCpHitlessAamModemDiagnosticResult object to determine the results." ::= { hzCpHitlessAamModemEntry 2 } hzCpHitlessAamModemDiagnosticResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The result from Hitless AAM Diagnostic is read from this object." ::= { hzCpHitlessAamModemEntry 3 } hzCpCodeCheckCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A counter representing the number of queue-freezup error correction that has encountered in the system." ::= { hzCpSysDiagnostics 3 } -- ---------------------------- -- hzCpSysLicensedFeatureGroups -- ---------------------------- hzCpSysUpgradeFeatureGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSysUpgradeFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of system upgrade feature groups." ::= { hzCpSysLicensedFeatureGroups 1 } hzCpSysUpgradeFeatureGroupsEntry OBJECT-TYPE SYNTAX HzCpSysUpgradeFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system upgrade feature group entry containing all licensed feature groups." INDEX { hzCpUpgradeLicensedFeatureIndex } ::= { hzCpSysUpgradeFeatureGroupsTable 1 } HzCpSysUpgradeFeatureGroupsEntry ::= SEQUENCE { hzCpUpgradeLicensedFeatureIndex INTEGER, hzCpUpgradeLicensedFeatureKey DisplayString, hzCpUpgradeLicensedFeatureCount Integer32 } hzCpUpgradeLicensedFeatureIndex OBJECT-TYPE SYNTAX INTEGER { rls (1), eoamEcfmLldp (2), hitlessAam (3), bac (4), encryption (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each licensed group. " ::= { hzCpSysUpgradeFeatureGroupsEntry 1 } hzCpUpgradeLicensedFeatureKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The key required for upgrading a feature." ::= { hzCpSysUpgradeFeatureGroupsEntry 2 } hzCpUpgradeLicensedFeatureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times the licensed feature has been changed successfully." ::= { hzCpSysUpgradeFeatureGroupsEntry 3 } hzCpSysDowngradeFeatureGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSysDowngradeFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of system downgrade system groups." ::= { hzCpSysLicensedFeatureGroups 2 } hzCpSysDowngradeFeatureGroupsEntry OBJECT-TYPE SYNTAX HzCpSysDowngradeFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system downgrade feature group entry containing all licensed feature groups." INDEX { hzCpDowngradeLicensedFeatureIndex } ::= { hzCpSysDowngradeFeatureGroupsTable 1 } HzCpSysDowngradeFeatureGroupsEntry ::= SEQUENCE { hzCpDowngradeLicensedFeatureIndex INTEGER, hzCpDowngradeLicensedFeature INTEGER, hzCpDowngradeLicensedFeatureCount Integer32, hzCpDowngradeLicensedFeatureKey DisplayString } hzCpDowngradeLicensedFeatureIndex OBJECT-TYPE SYNTAX INTEGER { rls (1), eoamEcfmLldp (2), hitlessAam (3), bac (4), encryption (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each licensed group. " ::= { hzCpSysDowngradeFeatureGroupsEntry 1 } hzCpDowngradeLicensedFeature OBJECT-TYPE SYNTAX INTEGER { downgrade (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Downgrading a licensed feature." ::= { hzCpSysDowngradeFeatureGroupsEntry 2 } hzCpDowngradeLicensedFeatureCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times the licensed feature has been downgraded." ::= { hzCpSysDowngradeFeatureGroupsEntry 3 } hzCpDowngradeLicensedFeatureKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The key generated after downgrading a licensed feature." ::= { hzCpSysDowngradeFeatureGroupsEntry 4 } hzCpSysLicensedFeatureGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSysLicensedFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of licensed feature groups." ::= { hzCpSysLicensedFeatureGroups 3 } hzCpSysLicensedFeatureGroupsEntry OBJECT-TYPE SYNTAX HzCpSysLicensedFeatureGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system feature group entry containing all licensed feature groups." INDEX { hzCpSysLicensedFeatureGroupIndex } ::= { hzCpSysLicensedFeatureGroupsTable 1 } HzCpSysLicensedFeatureGroupsEntry ::= SEQUENCE { hzCpSysLicensedFeatureGroupIndex INTEGER, hzCpSysLicensedFeatureGroup DisplayString, hzCpSysLicensedFeatureGroupStatus INTEGER } hzCpSysLicensedFeatureGroupIndex OBJECT-TYPE SYNTAX INTEGER { rls (1), eoamEcfmLldp (2), hitlessAam (3), bac (4), encryption (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each licensed group. " ::= { hzCpSysLicensedFeatureGroupsEntry 1 } hzCpSysLicensedFeatureGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the licensed feature group." ::= { hzCpSysLicensedFeatureGroupsEntry 2 } hzCpSysLicensedFeatureGroupStatus OBJECT-TYPE SYNTAX INTEGER { unlicensed (1), licensed (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the feature group is unlicensed or licensed." ::= { hzCpSysLicensedFeatureGroupsEntry 3 } -- - ---------------------------- -- hzCpAuthentication -- ---------------------------- hzCpPeerAuthenticationUniqueKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..34)) MAX-ACCESS read-write STATUS current DESCRIPTION "The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique." ::= { hzCpPeerAuthentication 1 } hzCpPeerAuthenticationMode OBJECT-TYPE SYNTAX INTEGER { none (1), unique (2), group (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the authentication mode for the system. If configured for unique authentication, a node only exchanges user traffic with one other node. The serial number is used in this case. If configured for group authentication, a node exchanges user traffic with another node of the same group and uses the authentication keys. " DEFVAL { none } ::= { hzCpPeerAuthentication 2 } hzCpPeerAuthenticationFailureAction OBJECT-TYPE SYNTAX INTEGER { blockTraffic (1), passTraffic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will allow all user traffic to be sent and recieved " DEFVAL { blockTraffic } ::= { hzCpPeerAuthentication 3 } hzCpPeerAuthenticationStatus OBJECT-TYPE SYNTAX INTEGER { notAuthenticated (1), authenticated (2), explicitAuthenticationFailure (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated means authentication is off or the system has not communicated yet with the other node, explicit authentication failure means authentication is on and authentication has failed" ::= { hzCpPeerAuthentication 4 } hzCpPeerAuthenticationGroupKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..34)) MAX-ACCESS read-write STATUS current DESCRIPTION "The serial number of the group that this node will communicate within. This is only used when authentication mode is set to group." ::= { hzCpPeerAuthentication 5 } -- -- hzCpCalendar -- hzCpDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99)" ::= { hzCpCalendar 1 } hzCpTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string in the format as follows: aa:bb:cc.ddd Where aa = hour of day ( range 00 to 23 ) bb = minute of hour ( range 00 to 59 ) cc = second of minute( range 00 to 59 ) ddd = thousandths of second (range 000 to 999)" ::= { hzCpCalendar 2 } hzCpDateAndTimeForLastTimeChange OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Date and Time for the last System time adjustment" ::= { hzCpCalendar 3 } hzCpLastTimeChange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last System time adjustment in hundredths of seconds" ::= { hzCpCalendar 4 } hzCpCumulativeTimeChange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cumulative System time adjustmen in hundredths of seconds" ::= { hzCpCalendar 5 } -- -- hzCpSntp -- hzCpSntpEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether SNTP feature is enabled." DEFVAL { enabled } ::= { hzCpSntp 1 } hzCpSntpOffset OBJECT-TYPE SYNTAX Integer32 (-140..140) MAX-ACCESS read-write STATUS current DESCRIPTION "System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour." DEFVAL { -40 } ::= { hzCpSntp 2 } hzCpSntpServerDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSntpServerDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table containing SNTP server entries" ::= { hzCpSntp 3 } hzCpSntpServerDepEntry OBJECT-TYPE SYNTAX HzCpSntpServerDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Contains the SNTP server information" INDEX { hzCpSntpServerIpAddressDep } ::= { hzCpSntpServerDepTable 1 } HzCpSntpServerDepEntry ::= SEQUENCE { hzCpSntpServerIndexDep Integer32, hzCpSntpServerIpAddressDep IpAddress, hzCpSntpServerStatusDep INTEGER, hzCpSntpServerStratumDep Integer32 } hzCpSntpServerIndexDep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each server." ::= { hzCpSntpServerDepEntry 1 } hzCpSntpServerIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the SNTP server. This object is deprecated by hzCpSntpServerAddress. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSntpServerDepEntry 2 } hzCpSntpServerStatusDep OBJECT-TYPE SYNTAX INTEGER { good (1), failed (2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The status of the SNTP server." ::= { hzCpSntpServerDepEntry 3 } hzCpSntpServerStratumDep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies the stratum of a server, 0 for failed server" ::= { hzCpSntpServerDepEntry 4 } hzCpSntpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSntpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing SNTP server entries" ::= { hzCpSntp 4 } hzCpSntpServerEntry OBJECT-TYPE SYNTAX HzCpSntpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the SNTP server information" INDEX { hzCpSntpServerIndex } ::= { hzCpSntpServerTable 1 } HzCpSntpServerEntry ::= SEQUENCE { hzCpSntpServerIndex Integer32, hzCpSntpServerDomain InetAddressType, hzCpSntpServerAddress InetAddress, hzCpSntpServerStatus INTEGER, hzCpSntpServerStratum Integer32 } hzCpSntpServerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each server." ::= { hzCpSntpServerEntry 1 } hzCpSntpServerDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates SNTP server inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpSntpServerEntry 2 } hzCpSntpServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates SNTP server inet address octet string. " ::= { hzCpSntpServerEntry 3 } hzCpSntpServerStatus OBJECT-TYPE SYNTAX INTEGER { good (1), failed (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the SNTP server." ::= { hzCpSntpServerEntry 4 } hzCpSntpServerStratum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the stratum of a server, 0 for failed server" ::= { hzCpSntpServerEntry 5 } hzCpSntpRestoreDefault OBJECT-TYPE SYNTAX INTEGER { restore (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restores SNTP servers to default Addresses." ::= { hzCpSntp 5 } hzCpSyncEState OBJECT-TYPE SYNTAX INTEGER { off (1), manual (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "In manual mode, syncE source will use primary clock source and when the primary source has loss of lock, the syncE goes into holdover. The primary source will be used again after it comes back. In auto mode, if the current source has trouble, it will try to recover from the other source." ::= { hzCpSyncE 1 } hzCpSyncEPrimarySource OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4), wp1 (5), free-run (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects which port to be used as syncE master clock source." ::= { hzCpSyncE 2 } hzCpSyncESecondarySource OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4), wp1 (5), free-run (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects which port to be used as syncE secondary when the master syncE is not available." ::= { hzCpSyncE 3 } hzCpSyncEMemberPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enter a string indicating all SyncE member ports. Example: p1 p4 Port options: p1 p2 p3 p4 wp1" ::= { hzCpSyncE 4 } hzCpSyncEForcedHoldover OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when holdover is the time in sec. The single quote marks i.e. ' ' are not used in the command." ::= { hzCpSyncE 5 } hzCpSyncERevertive OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command." ::= { hzCpSyncE 6 } hzCpSyncEClockSource OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4), wp1 (5), free-run (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves Synce clock source." ::= { hzCpSyncE 7 } hzCpSyncEAcquisitionStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Retrieves Synce acquisition status." ::= { hzCpSyncE 8 } hzCpSyncEWanderFilter OBJECT-TYPE SYNTAX INTEGER { option1 (1), option2 (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a badwidth between 1 and10 Hz. " ::= { hzCpSyncE 9 } hzCpBacRecordAvgPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds. " ::= { hzCpBac 1 } hzCpBacTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpBacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing BAC entries" ::= { hzCpBac 2 } hzCpBacEntry OBJECT-TYPE SYNTAX HzCpBacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the BAC information for all queues" INDEX { hzCpBacQIndex } ::= { hzCpBacTable 1 } HzCpBacEntry ::= SEQUENCE { hzCpBacQIndex INTEGER, hzCpBacQEnable INTEGER, hzCpBacQBlockSize Integer32, hzCpBacRecordLogging INTEGER, hzCpBacUncompressedRatio DisplayString, hzCpBacGain DisplayString } hzCpBacQIndex OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each of the 8 Queues." ::= { hzCpBacEntry 1 } hzCpBacQEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure queue compression state to disable/enable." ::= { hzCpBacEntry 2 } hzCpBacQBlockSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000> " ::= { hzCpBacEntry 3 } hzCpBacRecordLogging OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog." ::= { hzCpBacEntry 4 } hzCpBacUncompressedRatio OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in data over specified average period in percentage." ::= { hzCpBacEntry 5 } hzCpBacGain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all bytes compressed and bytes uncompressed calculated over an average period." ::= { hzCpBacEntry 6 } hzCpBwVsmVendorOui OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "As string representing the vendor OUI code. Example: 00-00-0C for Cisco" ::= { hzCpBandwidthVsm 1 } hzCpBwVsmMdLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Maintenanc level of Bandwidth VSM. The valid range is between 0-7. By default, the BW-VSM is associated with Maintenance Level 0." ::= { hzCpBandwidthVsm 2 } hzCpBwVsmWaitTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The wait time before sending vendor specific message." ::= { hzCpBandwidthVsm 3 } hzCpBwVsmPeriod OBJECT-TYPE SYNTAX INTEGER { one-sec (1), ten-sec (2), one-min (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the VSM transmission period. The default value is 10 seconds." ::= { hzCpBandwidthVsm 4 } hzCpBwVsmVlanTag OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bandwidth VSM can be configured to be transmitted with a configurable valid VLAN tag. By default, the BW-VSM will be sent untagged." ::= { hzCpBandwidthVsm 5 } hzCpBwVsmVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the VSM VLAN Id." ::= { hzCpBandwidthVsm 6 } hzCpBwVsmVlanPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the VSM priority. The valid range is between 1-7 and the default priority is 7." ::= { hzCpBandwidthVsm 7 } hzCpBwVsmPortList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The vendor specific message will only be sent out through the specified ports in the list. Port options: a comma-separted list of ports p1 to p4 Example: p1,p2" ::= { hzCpBandwidthVsm 8 } hzCpBwVsmState OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This enables or disables vendor specific messaging." ::= { hzCpBandwidthVsm 9 } hzCpPmRspiThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpPmRspiThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring table for Radio Synchronous Physical Interface thresholds." ::= { hzCpPM 1 } hzCpPmRspiThresholdEntry OBJECT-TYPE SYNTAX HzCpPmRspiThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains information for Radio Synchronous Physical Interface thresholds." INDEX { hzCpPmRspiThrIndex } ::= { hzCpPmRspiThresholdTable 1 } HzCpPmRspiThresholdEntry ::= SEQUENCE { hzCpPmRspiThrIndex Integer32, hzCpPmRLT1 Integer32, hzCpPmRLT2 Integer32, hzCpPmRLT3 Integer32, hzCpPmRLT4 Integer32, hzCpPmTLT1 Integer32, hzCpPmTLT2 Integer32, hzCpPmRspiThrRowStatus RowStatus } hzCpPmRspiThrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to PM RSPI Threshold table." ::= { hzCpPmRspiThresholdEntry 1 } hzCpPmRLT1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Receive Level Threshold 1, represents the number of seconds below the first threshold." ::= { hzCpPmRspiThresholdEntry 2 } hzCpPmRLT2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Receive Level Threshold 2, represents the number of seconds below the second threshold." ::= { hzCpPmRspiThresholdEntry 3 } hzCpPmRLT3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Receive Level Threshold 3, represents the number of seconds below the third threshold." ::= { hzCpPmRspiThresholdEntry 4 } hzCpPmRLT4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Receive Level Threshold 4, represents the number of seconds below the fourth threshold." ::= { hzCpPmRspiThresholdEntry 5 } hzCpPmTLT1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit Level Threshold 1, represents the number of seconds below the first threshold." ::= { hzCpPmRspiThresholdEntry 6 } hzCpPmTLT2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit Level Threshold 2, represents the number of seconds below the second threshold." ::= { hzCpPmRspiThresholdEntry 7 } hzCpPmRspiThrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for applying all RSPI thresholds simultaneously." ::= { hzCpPmRspiThresholdEntry 8 } hzCpPmAdvThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpPmAdvThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Monitoring table for Capacity thresholds." ::= { hzCpPM 2 } hzCpPmAdvThresholdEntry OBJECT-TYPE SYNTAX HzCpPmAdvThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains information for Capacity thresholds." INDEX { hzCpPmAdvThrIndex } ::= { hzCpPmAdvThresholdTable 1 } HzCpPmAdvThresholdEntry ::= SEQUENCE { hzCpPmAdvThrIndex Integer32, hzCpPmAdvTxHitsT1 Integer32, hzCpPmAdvRxHitsT1 Integer32, hzCpPmAdvRowStatus RowStatus } hzCpPmAdvThrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to PM Capacity Threshold table." ::= { hzCpPmAdvThresholdEntry 1 } hzCpPmAdvTxHitsT1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit Hits Threshold 1." ::= { hzCpPmAdvThresholdEntry 2 } hzCpPmAdvRxHitsT1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Receive Hits Threshold 1." ::= { hzCpPmAdvThresholdEntry 3 } hzCpPmAdvRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for applying all Capacity thresholds simultaneously." ::= { hzCpPmAdvThresholdEntry 4 } -- -- NetworkManagement -- hzCpMacAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address of the system." ::= { hzCpManagement 1 } hzCpTelnetAccessMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Telnet access is allowed." DEFVAL { enabled } ::= { hzCpManagement 2 } hzCpSshAccessMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ssh access is allowed." DEFVAL { enabled } ::= { hzCpManagement 3 } hzCpNetMgmtPortList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Describes the network management interface connection options. Enter a string indicating the management port. Example: p3 Port options: p1 or p2 or p3 or p4 or dp1 or dp2 or dp3 or dp4 Note: Need to set hzCpNetMgmtAppyToSystem if you want the changes to take effect in the system." ::= { hzCpNetMgmtInterfaceVlan 1 } hzCpNetMgmtVlanTagId OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN Tag Id (1...4095). Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtInterfaceVlan 2 } hzCpNetMgmtVlanTagPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority for VLAN tagging (0...7) Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtInterfaceVlan 3 } hzCpNetMgmtVlanTagging OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disables or enables VLAN tagging. VLAN tagging is the practice of inserting a VLAN Id into a packet header in order to identify which VLAN the packets belongs to. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtInterfaceVlan 4 } hzCpNetMgmtDscpPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Differentiated Serices Code Point (DSCP) priority to classify and prioritize types of traffic (0...63) Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtInterfaceVlan 5 } hzCpIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtIpv4 1 } hzCpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtIpv4 2 } hzCpDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default gateway for the system. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmtIpv4 3 } hzCpIpv6Domain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ipv6 inet address type. " ::= { hzCpNetMgmttIpv6 1 } hzCpIpv6Address OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates ipv6 inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmttIpv6 2 } hzCpIpv6Prefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates ipv6 prefix. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmttIpv6 3 } hzCpIpv6GatewayDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ipv6 gateway inet address type. " ::= { hzCpNetMgmttIpv6 4 } hzCpIpv6GatewayAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates ipv6 gateway inet address octet string. Note: Changing this option doesn't get applied to the system unless hzCpNetMgmtAppyToSystem is set." ::= { hzCpNetMgmttIpv6 5 } hzCpIpv6LinkLocalDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ipv6 link local inet address type. " ::= { hzCpNetMgmttIpv6 6 } hzCpIpv6LinkLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ipv6 link local inet address octet string. " ::= { hzCpNetMgmttIpv6 7 } hzCpNetMgmtApplyToSystem OBJECT-TYPE SYNTAX INTEGER { apply (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If system allows, setting this oid applies all network management interface changes to the system and a system reset can be avoided." ::= { hzCpNetworkManagementInterface 4 } -- -- SNMP MANAGERS -- hzCpSnmpUserAccess OBJECT-TYPE SYNTAX INTEGER { explicitManagers (1), any (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager with any-community-name will be able to gain SNMP access to the system" ::= { hzCpSnmp 1 } hzCpSnmpManagerAnyCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string name used by the 'any' manager." ::= { hzCpSnmp 2 } hzCpSnmpSetRequests OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether SNMP SET requests are allowed." ::= { hzCpSnmp 3 } hzCpSnmpManagersDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpManagersDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table containing snmp manager entries" ::= { hzCpSnmp 4 } hzCpSnmpManagersDepEntry OBJECT-TYPE SYNTAX HzCpSnmpManagersDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Contains the snmp manager information" INDEX { hzCpSnmpManagersIndexDep } ::= { hzCpSnmpManagersDepTable 1 } HzCpSnmpManagersDepEntry ::= SEQUENCE { hzCpSnmpManagersIndexDep Integer32, hzCpSnmpManagerIpAddressDep IpAddress, hzCpSnmpManagerCommunityNameDep DisplayString, hzCpSnmpManagerActivatedDep INTEGER } hzCpSnmpManagersIndexDep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each manager." ::= { hzCpSnmpManagersDepEntry 1 } hzCpSnmpManagerIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by hzCpSnmpManagerAddress. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSnmpManagersDepEntry 2 } hzCpSnmpManagerCommunityNameDep OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The community string name used by the manager." ::= { hzCpSnmpManagersDepEntry 3 } hzCpSnmpManagerActivatedDep OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies whether a specific manager is allowed to access the system. This object is deprecated by hzCpSnmpManagersActivated. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSnmpManagersDepEntry 4 } hzCpSnmpV3ManagersTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpV3ManagersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing snmp V3 manager entries" ::= { hzCpSnmp 5 } hzCpSnmpV3ManagersEntry OBJECT-TYPE SYNTAX HzCpSnmpV3ManagersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the snmp v3 manager information" INDEX { hzCpSnmpV3ManagersIndex } ::= { hzCpSnmpV3ManagersTable 1 } HzCpSnmpV3ManagersEntry ::= SEQUENCE { hzCpSnmpV3ManagersIndex Integer32, hzCpSnmpV3ManagerUserName DisplayString, hzCpSnmpV3ManagerAuthProtocol INTEGER, hzCpSnmpV3ManagerAuthPassword DisplayString, hzCpSnmpV3ManagerPrivProtocol INTEGER, hzCpSnmpV3ManagerPrivPassword DisplayString, hzCpSnmpV3ManagerActivated INTEGER } hzCpSnmpV3ManagersIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each v3 manager." ::= { hzCpSnmpV3ManagersEntry 1 } hzCpSnmpV3ManagerUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user name of the v3 Manager." ::= { hzCpSnmpV3ManagersEntry 2 } hzCpSnmpV3ManagerAuthProtocol OBJECT-TYPE SYNTAX INTEGER { noAuth (1), md5 (2), sha (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication alogorithm used by the v3 manager." ::= { hzCpSnmpV3ManagersEntry 3 } hzCpSnmpV3ManagerAuthPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication password of the v3 Manager." ::= { hzCpSnmpV3ManagersEntry 4 } hzCpSnmpV3ManagerPrivProtocol OBJECT-TYPE SYNTAX INTEGER { noPriv (1), des (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy encryption alogorithm used by the v3 manager." ::= { hzCpSnmpV3ManagersEntry 5 } hzCpSnmpV3ManagerPrivPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy password of the v3 Manager." ::= { hzCpSnmpV3ManagersEntry 6 } hzCpSnmpV3ManagerActivated OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether a specific v3 manager is allowed to access the system" ::= { hzCpSnmpV3ManagersEntry 7 } hzCpSnmpAccessMode OBJECT-TYPE SYNTAX INTEGER { off (1), v1 (2), v2c (3), v3 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the running SNMP version on the system." ::= { hzCpSnmp 6 } hzCpSnmpManagersTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpManagersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing snmp manager entries" ::= { hzCpSnmp 7 } hzCpSnmpManagersEntry OBJECT-TYPE SYNTAX HzCpSnmpManagersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the snmp manager information" INDEX { hzCpSnmpManagersIndex } ::= { hzCpSnmpManagersTable 1 } HzCpSnmpManagersEntry ::= SEQUENCE { hzCpSnmpManagersIndex Integer32, hzCpSnmpManagerDomain InetAddressType, hzCpSnmpManagerAddress InetAddress, hzCpSnmpManagerCommunityName DisplayString, hzCpSnmpManagersPrefixLength InetAddressPrefixLength, hzCpSnmpManagerActivated INTEGER } hzCpSnmpManagersIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each manager." ::= { hzCpSnmpManagersEntry 1 } hzCpSnmpManagerDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates snmp manager inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpSnmpManagersEntry 2 } hzCpSnmpManagerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates snmp manager inet address octet string. " ::= { hzCpSnmpManagersEntry 3 } hzCpSnmpManagerCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string name used by the manager." ::= { hzCpSnmpManagersEntry 4 } hzCpSnmpManagersPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-write STATUS current DESCRIPTION "The Ip Address prefix length. The valid range for IPV4 Address is 1-32 and for IPV6 is 1-128." ::= { hzCpSnmpManagersEntry 5 } hzCpSnmpManagerActivated OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether a specific manager is allowed to access the system. This object deprecates hzCpSnmpManagerActivatedDep." ::= { hzCpSnmpManagersEntry 32 } -- -- TRAP INFORMATION HOSTS, ENABLE/DISABLE -- hzCpSnmpTrapHostDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpTrapHostDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table containing SNMP trap host entries." ::= { hzCpTrapConfig 1 } hzCpSnmpTrapHostDepEntry OBJECT-TYPE SYNTAX HzCpSnmpTrapHostDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The snmp trap host entry containing all the trap host information" INDEX { hzCpSnmpTrapHostIndexDep } ::= { hzCpSnmpTrapHostDepTable 1 } HzCpSnmpTrapHostDepEntry ::= SEQUENCE { hzCpSnmpTrapHostIndexDep Integer32, hzCpSnmpTrapHostIpAddressDep IpAddress, hzCpSnmpTrapHostCommunityNameDep DisplayString, hzCpSnmpTrapHostActivatedDep INTEGER } hzCpSnmpTrapHostIndexDep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each trap host. " ::= { hzCpSnmpTrapHostDepEntry 1 } hzCpSnmpTrapHostIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSnmpTrapHostDepEntry 2 } hzCpSnmpTrapHostCommunityNameDep OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The community string name used in Traps." ::= { hzCpSnmpTrapHostDepEntry 3 } hzCpSnmpTrapHostActivatedDep OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by hzCpSnmpTrapHostActivated. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSnmpTrapHostDepEntry 4 } -- -- SNMP V3 TRAP HOST TABLE -- hzCpSnmpV3TrapHostsDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpV3TrapHostsDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table containing snmp V3 trap host entries" ::= { hzCpTrapConfig 2 } hzCpSnmpV3TrapHostsDepEntry OBJECT-TYPE SYNTAX HzCpSnmpV3TrapHostsDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Contains the snmp v3 trap host information" INDEX { hzCpSnmpV3TrapHostsIndexDep } ::= { hzCpSnmpV3TrapHostsDepTable 1 } HzCpSnmpV3TrapHostsDepEntry ::= SEQUENCE { hzCpSnmpV3TrapHostsIndexDep Integer32, hzCpSnmpV3TrapHostIpAddressDep IpAddress, hzCpSnmpV3TrapHostUserNameDep DisplayString, hzCpSnmpV3TrapHostAuthProtocolDep INTEGER, hzCpSnmpV3TrapHostAuthPasswordDep DisplayString, hzCpSnmpV3TrapHostPrivProtocolDep INTEGER, hzCpSnmpV3TrapHostPrivPasswordDep DisplayString, hzCpSnmpV3TrapHostActivatedDep INTEGER } hzCpSnmpV3TrapHostsIndexDep OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 1 } hzCpSnmpV3TrapHostIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by hzCpSnmpV3TrapHostAddress. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSnmpV3TrapHostsDepEntry 2 } hzCpSnmpV3TrapHostUserNameDep OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The user name of the v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 3 } hzCpSnmpV3TrapHostAuthProtocolDep OBJECT-TYPE SYNTAX INTEGER { noAuth (1), md5 (2), sha (3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The authentication alogorithm used by the v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 4 } hzCpSnmpV3TrapHostAuthPasswordDep OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The authentication password of the v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 5 } hzCpSnmpV3TrapHostPrivProtocolDep OBJECT-TYPE SYNTAX INTEGER { noPriv (1), des (2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The privacy encryption alogorithm used by the v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 6 } hzCpSnmpV3TrapHostPrivPasswordDep OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The privacy password of the v3 trap host." ::= { hzCpSnmpV3TrapHostsDepEntry 7 } hzCpSnmpV3TrapHostActivatedDep OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies whether a specific v3 trap host is allowed to access the system" ::= { hzCpSnmpV3TrapHostsDepEntry 8 } hzCpColdStartTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 1 } hzCpLinkDownTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 2 } hzCpPeerAuthenticationFailureTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 3 } hzCpHitlessAamConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 4 } hzCpHitlessAamModulationLoweredTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 5 } hzCpHitlessAamModulationChangedEventTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" ::= { hzCpTrapEnable 6 } hzCpAtpcConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 7 } hzCpAtpcAutoDisabledTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 8 } hzCpNoSntpServersReachableTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 9 } hzCpFrequencyFileInvalidTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 10 } hzCpAggregateDroppedFramesThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 11 } hzCpQueueDroppedFramesThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 12 } hzCpBwUtilizationThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 13 } hzCpQueueDepthThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 14 } hzCpRlsConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 15 } hzCpRlsShutdownActivatedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 16 } hzCpRlsQueueBasedShutdownActivatedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 17 } hzCpModemRxLossOfSignalLockTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 18 } hzCpModemSnrBelowThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 19 } hzCpModemEqualizerStressThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 20 } hzCpRslBelowThresholdTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 21 } hzCpRadioSynthLostLockTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 22 } hzCpRadioCalTableNotAvailableTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 23 } hzCpRadioDrainCurrentOutOfLimitTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 24 } hzCpRadioPowerAmplifierTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 25 } hzCpTemperatureOutOfLimitTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 26 } hzCpRedundancyConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 27 } hzCpRedundancyActiveOnSecondaryTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 28 } hzCpRedundancyOperatingInForcedSwitchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 29 } hzCpRedundancyEnetCrossLinkTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 30 } hzCpRedundancyActiveUsingPartnerWLinkTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 31 } hzCpRedundancyStandbyWLinkInUseTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 32 } hzCpRedundancyStandbyOnPrimaryTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 33 } hzCpX2DeliveringHalfCapacityTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 34 } hzCpBncCableSignalNotDetectedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 35 } hzCpEthernetSpeedReducedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 36 } hzCpSynceLostLockTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" ::= { hzCpTrapEnable 37 } hzCpSynceSecondarySourceInUseTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" ::= { hzCpTrapEnable 38 } hzCpUserSessionTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not. " DEFVAL { disabled } ::= { hzCpTrapEnable 39 } hzCpInvalidSystemConfigTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 40 } hzCpMibChangeNotSavedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 41 } hzCpTransmitterLossOfSyncTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 42 } hzCpRadioLinearityCalErrorTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" ::= { hzCpTrapEnable 43 } hzCpSynceConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 44 } hzCpCryptoPowerUpTestsFailedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { enabled } ::= { hzCpTrapEnable 45 } hzCpCryptoConfigMismatchTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" DEFVAL { disabled } ::= { hzCpTrapEnable 46 } hzCpSystemTimeChangeTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not" ::= { hzCpTrapEnable 47 } hzCpCodeCheckTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not." ::= { hzCpTrapEnable 48 } hzCpConfigChangedTrap OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this trap is to be sent or not." ::= { hzCpTrapEnable 49 } hzCpSnmpTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing SNMP trap host entries." ::= { hzCpTrapConfig 4 } hzCpSnmpTrapHostEntry OBJECT-TYPE SYNTAX HzCpSnmpTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The snmp trap host entry containing all the trap host information" INDEX { hzCpSnmpTrapHostIndex } ::= { hzCpSnmpTrapHostTable 1 } HzCpSnmpTrapHostEntry ::= SEQUENCE { hzCpSnmpTrapHostIndex Integer32, hzCpSnmpTrapHostDomain InetAddressType, hzCpSnmpTrapHostAddress InetAddress, hzCpSnmpTrapHostCommunityName DisplayString, hzCpSnmpTrapHostActivated INTEGER } hzCpSnmpTrapHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each trap host. " ::= { hzCpSnmpTrapHostEntry 1 } hzCpSnmpTrapHostDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates snmp trap host inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpSnmpTrapHostEntry 2 } hzCpSnmpTrapHostAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates snmp trap host inet address octet string. This object deprecates hzCpSnmpTrapHostIpAddressDep." ::= { hzCpSnmpTrapHostEntry 3 } hzCpSnmpTrapHostCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community string name used in Traps." ::= { hzCpSnmpTrapHostEntry 4 } hzCpSnmpTrapHostActivated OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether traps are to be sent to this specific host or not. This object deprecates hzCpSnmpTrapHostActivatedDep." ::= { hzCpSnmpTrapHostEntry 32 } -- -- SNMP V3 TRAP HOST TABLE -- hzCpSnmpV3TrapHostsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSnmpV3TrapHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing snmp V3 trap host entries" ::= { hzCpTrapConfig 5 } hzCpSnmpV3TrapHostsEntry OBJECT-TYPE SYNTAX HzCpSnmpV3TrapHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the snmp v3 trap host information" INDEX { hzCpSnmpV3TrapHostsIndex } ::= { hzCpSnmpV3TrapHostsTable 1 } HzCpSnmpV3TrapHostsEntry ::= SEQUENCE { hzCpSnmpV3TrapHostsIndex Integer32, hzCpSnmpV3TrapHostDomain InetAddressType, hzCpSnmpV3TrapHostAddress InetAddress, hzCpSnmpV3TrapHostUserName DisplayString, hzCpSnmpV3TrapHostAuthProtocol INTEGER, hzCpSnmpV3TrapHostAuthPassword DisplayString, hzCpSnmpV3TrapHostPrivProtocol INTEGER, hzCpSnmpV3TrapHostPrivPassword DisplayString, hzCpSnmpV3TrapHostActivated INTEGER } hzCpSnmpV3TrapHostsIndex OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 1 } hzCpSnmpV3TrapHostDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates v3 trap host inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpSnmpV3TrapHostsEntry 2 } hzCpSnmpV3TrapHostAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates snmp v3 trap host inet address octet string. This object deprecates hzCpSnmpV3TrapHostIpAddressDep." ::= { hzCpSnmpV3TrapHostsEntry 3 } hzCpSnmpV3TrapHostUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user name of the v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 4 } hzCpSnmpV3TrapHostAuthProtocol OBJECT-TYPE SYNTAX INTEGER { noAuth (1), md5 (2), sha (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication alogorithm used by the v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 5 } hzCpSnmpV3TrapHostAuthPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The authentication password of the v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 6 } hzCpSnmpV3TrapHostPrivProtocol OBJECT-TYPE SYNTAX INTEGER { noPriv (1), des (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy encryption alogorithm used by the v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 7 } hzCpSnmpV3TrapHostPrivPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The privacy password of the v3 trap host." ::= { hzCpSnmpV3TrapHostsEntry 8 } hzCpSnmpV3TrapHostActivated OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether v3 traps are to be sent to this specific host or not. This object deprecates hzCpSnmpV3TrapHostActivatedDep." ::= { hzCpSnmpV3TrapHostsEntry 32 } -- -- hzCpRadius -- hzCpRadiusSuperUserAuthentication OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If strict mode is off, the super user can login when radius is turned off or unreachable." DEFVAL { off } ::= { hzCpRadius 1 } hzCpRadiusServerTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Timeout period for authentication requests" ::= { hzCpRadius 2 } hzCpRadiusServerDeadTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Time to declare an unresponsive server 'dead'" ::= { hzCpRadius 3 } hzCpRadiusServerReTransmit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of retransmits to an unresponsive server" ::= { hzCpRadius 4 } hzCpRadiusServerDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRadiusServerDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table containing radius server entries" ::= { hzCpRadius 5 } hzCpRadiusServerDepEntry OBJECT-TYPE SYNTAX HzCpRadiusServerDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Contains the SNTP server information" INDEX { hzCpRadiusServerIndexDep } ::= { hzCpRadiusServerDepTable 1 } HzCpRadiusServerDepEntry ::= SEQUENCE { hzCpRadiusServerIndexDep Integer32, hzCpRadiusCfgdHostIpAddressDep IpAddress, hzCpRadiusCfgdHostKeyDep DisplayString } hzCpRadiusServerIndexDep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each radius server." ::= { hzCpRadiusServerDepEntry 1 } hzCpRadiusCfgdHostIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the configured radius server. This object is deprecated by hzCpRadiusCfgdHostAddress. The value is 0.0.0.0 if not available or not applicable. " ::= { hzCpRadiusServerDepEntry 2 } hzCpRadiusCfgdHostKeyDep OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The key of the configured radius server." ::= { hzCpRadiusServerDepEntry 3 } hzCpRadiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRadiusServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing radius server entries" ::= { hzCpRadius 6 } hzCpRadiusServerEntry OBJECT-TYPE SYNTAX HzCpRadiusServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the SNTP server information" INDEX { hzCpRadiusServerIndex } ::= { hzCpRadiusServerTable 1 } HzCpRadiusServerEntry ::= SEQUENCE { hzCpRadiusServerIndex Integer32, hzCpRadiusCfgdHostDomain InetAddressType, hzCpRadiusCfgdHostAddress InetAddress, hzCpRadiusCfgdHostKey DisplayString } hzCpRadiusServerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each radius server." ::= { hzCpRadiusServerEntry 1 } hzCpRadiusCfgdHostDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates configured radius radius inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpRadiusServerEntry 2 } hzCpRadiusCfgdHostAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates configured radius server inet address octet string. This object deprecates hzCpRadiusCfgdHostIpAddressDep." ::= { hzCpRadiusServerEntry 3 } hzCpRadiusCfgdHostKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The key of the configured radius server." ::= { hzCpRadiusServerEntry 4 } -- ------------------------------ -- hzCpManagementSessions -- ------------------------------ hzCpUserSessionUserTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpUserSessionUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of user sessions" ::= { hzCpManagementSessions 1 } hzCpUserSessionUserEntry OBJECT-TYPE SYNTAX HzCpUserSessionUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User session entry" INDEX { hzCpUserSessionUserIndex } ::= { hzCpUserSessionUserTable 1 } HzCpUserSessionUserEntry ::= SEQUENCE { hzCpUserSessionUserIndex INTEGER, hzCpUserSessionUserName DisplayString, hzCpUserSessionUserConnectionType DisplayString, hzCpUserSessionUserState INTEGER } hzCpUserSessionUserIndex OBJECT-TYPE SYNTAX INTEGER { user1 (1), user2 (2), user3 (3), user4 (4), user5 (5), user6 (6), user7 (7), user8 (8), user9 (9), user10 (10), user11 (11), user12 (12), user13 (13), user14 (14), user15 (15), user16 (16), user17 (17), user18 (18), user19 (19), user20 (20) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each user." ::= { hzCpUserSessionUserEntry 1 } hzCpUserSessionUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress." ::= { hzCpUserSessionUserEntry 2 } hzCpUserSessionUserConnectionType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment." ::= { hzCpUserSessionUserEntry 3 } hzCpUserSessionUserState OBJECT-TYPE SYNTAX INTEGER { informationNotAvailable (1), sessionTerminated (2), sessionInProgress (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system." ::= { hzCpUserSessionUserEntry 4 } -- -- HTTPS group -- hzCpHttpEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether HTTP is enabled." DEFVAL { disabled } ::= { hzCpHttp 1 } hzCpHttpSecureCertificateStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the HTTPS certificate status" ::= { hzCpHttpSecure 1 } hzCpHttpSecureAccessForAdminUsers OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the HTTPS access requirement for Admin user group." ::= { hzCpHttpSecure 2 } hzCpHttpSecureAccessForNocUsers OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the HTTPS access requirement for Noc user group." ::= { hzCpHttpSecure 3 } hzCpHttpSecureAccessForSuperUsers OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the HTTPS access requirement for Super user group." ::= { hzCpHttpSecure 4 } hzCpEnetPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for enet port configuration" ::= { hzCpEnetPort 1 } hzCpEnetPortConfigEntry OBJECT-TYPE SYNTAX HzCpEnetPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for enet port configuration" INDEX { hzCpEnetPortIndex } ::= { hzCpEnetPortConfigTable 1 } HzCpEnetPortConfigEntry ::= SEQUENCE { hzCpEnetPortIndex INTEGER, hzCpEnetPortName DisplayString, hzCpEnetPortAutoNegotiation INTEGER, hzCpEnetPortSpeed INTEGER, hzCpEnetPortDuplex INTEGER, hzCpEnetPortMedia INTEGER, hzCpEnetPortAdminState INTEGER, hzCpEnetPortPauseFrame INTEGER, hzCpEnetPortMaxFrameSize Integer32, hzCpEnetPortOpticalTransceiverState INTEGER, hzCpEnetPortState INTEGER, hzCpEnetPayloadState INTEGER } hzCpEnetPortIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each enet port." ::= { hzCpEnetPortConfigEntry 1 } -- -- PORT CONFIG -- hzCpEnetPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the port interface name" ::= { hzCpEnetPortConfigEntry 2 } hzCpEnetPortAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex. " ::= { hzCpEnetPortConfigEntry 3 } hzCpEnetPortSpeed OBJECT-TYPE SYNTAX INTEGER { x10M (1), x100M (2), x1000M (3), auto (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the port interface speed ." ::= { hzCpEnetPortConfigEntry 4 } hzCpEnetPortDuplex OBJECT-TYPE SYNTAX INTEGER { full (1), half (2), auto (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Configure the port interface duplex." ::= { hzCpEnetPortConfigEntry 5 } hzCpEnetPortMedia OBJECT-TYPE SYNTAX INTEGER { copper (1), fiber (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the port interface media type." ::= { hzCpEnetPortConfigEntry 6 } hzCpEnetPortAdminState OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the admin status of the port." ::= { hzCpEnetPortConfigEntry 7 } hzCpEnetPortPauseFrame OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. When PAUSE is not enabled, no pause frames will be generated by the system. " DEFVAL { off } ::= { hzCpEnetPortConfigEntry 8 } hzCpEnetPortMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (1600..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "For port the default maximum frame size is 1600 bytes. The settable maximum frame size must be a multiple of 128. If the chosen maximum frame size is not a multiple of 128, its closest number which is a multiple of 128 is actually used. The settable lowest maximum frame size is 1664, and the settable highest maximum frame size is 9600. If the chosen maximum frame size is out of this range, the default maximum frame size of 1600 is used. " DEFVAL { 1600 } ::= { hzCpEnetPortConfigEntry 9 } hzCpEnetPortOpticalTransceiverState OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled. This option is valid for port1 only if media type is configured as fiber." DEFVAL { off } ::= { hzCpEnetPortConfigEntry 10 } hzCpEnetPortState OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables enet-port3 or enet-port4." ::= { hzCpEnetPortConfigEntry 11 } hzCpEnetPayloadState OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables payload on a specific port. If payload state is disabled for that port, it's considered as purely management." ::= { hzCpEnetPortConfigEntry 12 } hzCpEnetPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for enet port status" ::= { hzCpEnetPort 2 } hzCpEnetPortStatusEntry OBJECT-TYPE SYNTAX HzCpEnetPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for enet port status" INDEX { hzCpEnetPortStatusIndex } ::= { hzCpEnetPortStatusTable 1 } HzCpEnetPortStatusEntry ::= SEQUENCE { hzCpEnetPortStatusIndex INTEGER, hzCpEnetPortLinkStatus INTEGER, hzCpEnetPortAutoNegotiationStatus INTEGER, hzCpEnetPortSpeedStatus INTEGER, hzCpEnetPortDuplexStatus INTEGER, hzCpEnetPortMediaStatus INTEGER } hzCpEnetPortStatusIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each enet port." ::= { hzCpEnetPortStatusEntry 1 } -- -- PORT STATUS -- hzCpEnetPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { down (1), up (2), invalid (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port link status." ::= { hzCpEnetPortStatusEntry 2 } hzCpEnetPortAutoNegotiationStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2), invalid (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port AutoNegotiation status." ::= { hzCpEnetPortStatusEntry 3 } hzCpEnetPortSpeedStatus OBJECT-TYPE SYNTAX INTEGER { x10M (1), x100M (2), x1000M (3), auto (4), invalid (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port interface speed status." ::= { hzCpEnetPortStatusEntry 4 } hzCpEnetPortDuplexStatus OBJECT-TYPE SYNTAX INTEGER { full (1), half (2), auto (3), invalid (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port interface duplex status." ::= { hzCpEnetPortStatusEntry 5 } hzCpEnetPortMediaStatus OBJECT-TYPE SYNTAX INTEGER { copper (1), fiber (2), auto (3), invalid (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port interface media status." ::= { hzCpEnetPortStatusEntry 6 } hzCpEnetPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for enet port stats" ::= { hzCpEnetPort 3 } hzCpEnetPortStatsEntry OBJECT-TYPE SYNTAX HzCpEnetPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for enet port stats" INDEX { hzCpEnetPortStatsIndex } ::= { hzCpEnetPortStatsTable 1 } HzCpEnetPortStatsEntry ::= SEQUENCE { hzCpEnetPortStatsIndex INTEGER, hzCpEnetPortTxFrames Counter64, hzCpEnetPortTxBytes Counter64, hzCpEnetPortRxFramesOk Counter64, hzCpEnetPortRxBytesOk Counter64, hzCpEnetPortRxFramesLengthErrors Counter64, hzCpEnetPortRxFramesCrcErrors Counter64, hzCpEnetPortRxDiscarded Counter64 } hzCpEnetPortStatsIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each enet port." ::= { hzCpEnetPortStatsEntry 1 } hzCpEnetPortTxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { hzCpEnetPortStatsEntry 2 } hzCpEnetPortTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { hzCpEnetPortStatsEntry 3 } hzCpEnetPortRxFramesOk OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received on the interface, including framing characters." ::= { hzCpEnetPortStatsEntry 4 } hzCpEnetPortRxBytesOk OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { hzCpEnetPortStatsEntry 5 } hzCpEnetPortRxFramesLengthErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { hzCpEnetPortStatsEntry 6 } hzCpEnetPortRxFramesCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received via the interface which were discarded because of rx frames CRC errors." ::= { hzCpEnetPortStatsEntry 7 } hzCpEnetPortRxDiscarded OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { hzCpEnetPortStatsEntry 8 } hzCpEnetAggTxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated port egress frames." ::= { hzCpEnetAggregatedStats 1 } hzCpEnetAggTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated port egress bytes." ::= { hzCpEnetAggregatedStats 2 } hzCpEnetAggRxFramesOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated port ingress frames." ::= { hzCpEnetAggregatedStats 3 } hzCpEnetAggRxBytesOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated port ingress bytes." ::= { hzCpEnetAggregatedStats 4 } hzCpEnetAggRxFramesLengthError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated frames received that were discarded due to length error." ::= { hzCpEnetAggregatedStats 5 } hzCpEnetAggPortRxFramesCrcError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated frames received that were discarded due to CRC error. " ::= { hzCpEnetAggregatedStats 6 } hzCpEnetAggPortRxFramesDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of aggregated frames received that were discarded due to an error. " ::= { hzCpEnetAggregatedStats 7 } hzCpEnetAggBWUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The carried load over link capacity for port." ::= { hzCpEnetAggregatedStats 8 } hzCpEnetAggIngressDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs" ::= { hzCpEnetAggregatedStats 9 } hzCpEnetAggEgressDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs." ::= { hzCpEnetAggregatedStats 10 } hzCpEnetAggFramesInQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetAggFramesInQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of enet aggregate frames." ::= { hzCpEnetAggregatedStats 11 } hzCpEnetAggFramesInQueueEntry OBJECT-TYPE SYNTAX HzCpEnetAggFramesInQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of enet aggregate frames." INDEX { hzCpEnetAggFramesInQueueIndex } ::= { hzCpEnetAggFramesInQueueTable 1 } HzCpEnetAggFramesInQueueEntry ::= SEQUENCE { hzCpEnetAggFramesInQueueIndex INTEGER, hzCpEnetAggFramesInQueue Counter64, hzCpEnetAggFramesInQueueDiscarded Counter64 } hzCpEnetAggFramesInQueueIndex OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each of the 8 queues." ::= { hzCpEnetAggFramesInQueueEntry 1 } hzCpEnetAggFramesInQueue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of frames in queues." ::= { hzCpEnetAggFramesInQueueEntry 2 } hzCpEnetAggFramesInQueueDiscarded OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of frames received in queues that were discarded due to an error. One possible reason is lack of buffer space." ::= { hzCpEnetAggFramesInQueueEntry 3 } hzCpEnetPortLcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetPortLcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for enet port stats" ::= { hzCpEnetPort 5 } hzCpEnetPortLcStatsEntry OBJECT-TYPE SYNTAX HzCpEnetPortLcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for enet port stats" INDEX { hzCpEnetPortLcStatsIndex } ::= { hzCpEnetPortLcStatsTable 1 } HzCpEnetPortLcStatsEntry ::= SEQUENCE { hzCpEnetPortLcStatsIndex INTEGER, hzCpEnetPortLcTxFrames Counter32, hzCpEnetPortLcTxBytes Counter32, hzCpEnetPortLcRxFramesOk Counter32, hzCpEnetPortLcRxBytesOk Counter32, hzCpEnetPortLcRxFramesLengthErrors Counter32, hzCpEnetPortLcRxFramesCrcErrors Counter32, hzCpEnetPortLcRxDiscarded Counter32 } hzCpEnetPortLcStatsIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each enet port." ::= { hzCpEnetPortLcStatsEntry 1 } hzCpEnetPortLcTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { hzCpEnetPortLcStatsEntry 2 } hzCpEnetPortLcTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { hzCpEnetPortLcStatsEntry 3 } hzCpEnetPortLcRxFramesOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing total number of bytes received on the interface, including framing characters." ::= { hzCpEnetPortLcStatsEntry 4 } hzCpEnetPortLcRxBytesOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { hzCpEnetPortLcStatsEntry 5 } hzCpEnetPortLcRxFramesLengthErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { hzCpEnetPortLcStatsEntry 6 } hzCpEnetPortLcRxFramesCrcErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the number of packets received via the interface which were discarded because of rx frames CRC errors." ::= { hzCpEnetPortLcStatsEntry 7 } hzCpEnetPortLcRxDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { hzCpEnetPortLcStatsEntry 8 } hzCpEnetAggLcTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated port egress frames." ::= { hzCpEnetAggregatedLcStats 1 } hzCpEnetAggLcTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated port egress bytes." ::= { hzCpEnetAggregatedLcStats 2 } hzCpEnetAggLcRxFramesOK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated port ingress frames." ::= { hzCpEnetAggregatedLcStats 3 } hzCpEnetAggLcRxBytesOK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated port ingress bytes." ::= { hzCpEnetAggregatedLcStats 4 } hzCpEnetAggLcRxFramesLengthError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to length error." ::= { hzCpEnetAggregatedLcStats 5 } hzCpEnetAggLcRxFramesCrcError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to CRC error." ::= { hzCpEnetAggregatedLcStats 6 } hzCpEnetAggLcRxFramesDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of aggregated frames received that were discarded due to an error." ::= { hzCpEnetAggregatedLcStats 7 } hzCpEnetAggLcBWUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the carried load over link capacity for port." ::= { hzCpEnetAggregatedLcStats 8 } hzCpEnetAggLcIngressDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs" ::= { hzCpEnetAggregatedLcStats 9 } hzCpEnetAggLcEgressDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs." ::= { hzCpEnetAggregatedLcStats 10 } hzCpEnetAggLcFramesInQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetAggLcFramesInQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of enet aggregate frames." ::= { hzCpEnetAggregatedLcStats 11 } hzCpEnetAggLcFramesInQueueEntry OBJECT-TYPE SYNTAX HzCpEnetAggLcFramesInQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of enet aggregate frames." INDEX { hzCpEnetAggLcFramesInQueueIndex } ::= { hzCpEnetAggLcFramesInQueueTable 1 } HzCpEnetAggLcFramesInQueueEntry ::= SEQUENCE { hzCpEnetAggLcFramesInQueueIndex INTEGER, hzCpEnetAggLcFramesInQueue Counter32, hzCpEnetAggLcFramesInQueueDiscarded Counter32 } hzCpEnetAggLcFramesInQueueIndex OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each of the 8 queues." ::= { hzCpEnetAggLcFramesInQueueEntry 1 } hzCpEnetAggLcFramesInQueue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of frames in queues." ::= { hzCpEnetAggLcFramesInQueueEntry 2 } hzCpEnetAggLcFramesInQueueDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of frames received in queues that were discarded due to an error. One possible reason is lack of buffer space." ::= { hzCpEnetAggLcFramesInQueueEntry 3 } hzCpEnetPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpEnetPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of enet port vlan setting." ::= { hzCpEnetPort 7 } hzCpEnetPortVlanEntry OBJECT-TYPE SYNTAX HzCpEnetPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of enet port vlan setting." INDEX { hzCpEnetPortVlanIndex } ::= { hzCpEnetPortVlanTable 1 } HzCpEnetPortVlanEntry ::= SEQUENCE { hzCpEnetPortVlanIndex INTEGER, hzCpEnetPortDefaultVlanId Integer32, hzCpEnetPortDefaultVlanPriority Integer32 } hzCpEnetPortVlanIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name identifying each enet port." ::= { hzCpEnetPortVlanEntry 1 } hzCpEnetPortDefaultVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates default VLAN Tag Id (1...4095) per port." ::= { hzCpEnetPortVlanEntry 2 } hzCpEnetPortDefaultVlanPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated default VLAN tagging priority (0...7) per port." ::= { hzCpEnetPortVlanEntry 3 } -- ----------------------------- -- hzCpWirelessInterfaceNames -- ----------------------------- hzCpWirelessInterfaceNameTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpWirelessInterfaceNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Modems" ::= { hzCpWirelessInterfaceNames 1 } hzCpWirelessInterfaceNameEntry OBJECT-TYPE SYNTAX HzCpWirelessInterfaceNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Wireless Interface Modem" INDEX { hzCpWirelessInterfaceNameIndex } ::= { hzCpWirelessInterfaceNameTable 1 } HzCpWirelessInterfaceNameEntry ::= SEQUENCE { hzCpWirelessInterfaceNameIndex INTEGER, hzCpWirelessInterfaceName DisplayString } hzCpWirelessInterfaceNameIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1), wireless-port-2 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each Wireless Interface." ::= { hzCpWirelessInterfaceNameEntry 1 } hzCpWirelessInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the functionality of the Wireless Interface." ::= { hzCpWirelessInterfaceNameEntry 2 } -- ---------------- -- hzCpModemTable -- ---------------- hzCpModemTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Modems" ::= { hzCpWirelessInterfaceModems 1 } hzCpModemEntry OBJECT-TYPE SYNTAX HzCpModemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Wireless Interface Modem" INDEX { hzCpModemIndex } ::= { hzCpModemTable 1 } HzCpModemEntry ::= SEQUENCE { hzCpModemIndex INTEGER, hzCpModemOperStatus INTEGER, hzCpModemChannelizedRSL Integer32, hzCpModemChannelizedRSLUnsignedInt Integer32, hzCpModemModulationType INTEGER, hzCpModemRxSpeed Integer32, hzCpModemTxSpeed Integer32, hzCpModemSNR Integer32, hzCpModemEbToNoiseRatio Integer32, hzCpModemEqualizerStress Integer32 } hzCpModemIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpModemEntry 1 } hzCpModemOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), testing (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. Testing indicates that no operational packets can be passed." ::= { hzCpModemEntry 2 } hzCpModemChannelizedRSL OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm" ::= { hzCpModemEntry 3 } hzCpModemChannelizedRSLUnsignedInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBm" ::= { hzCpModemEntry 4 } hzCpModemModulationType OBJECT-TYPE SYNTAX INTEGER { qpsk (1), qam16 (2), qam32 (3), qam64 (4), qam128 (5), qam256 (6), qam512 (7), qam1024 (8), qam2048 (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The modulation type of the modem, distinguished according to the physical/link protocol." ::= { hzCpModemEntry 5 } hzCpModemRxSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps" ::= { hzCpModemEntry 6 } hzCpModemTxSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps" ::= { hzCpModemEntry 7 } hzCpModemSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SNR value in dB. Divide the value by 10 to get the actual SNR." ::= { hzCpModemEntry 8 } hzCpModemEbToNoiseRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio" ::= { hzCpModemEntry 9 } hzCpModemEqualizerStress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working." ::= { hzCpModemEntry 10 } -- ---------------------------- -- hzCpWirelessInterfaceModems -- ---------------------------- hzCpWirelessPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpWirelessPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Modem Statistics" ::= { hzCpWirelessInterfaceModems 2 } hzCpWirelessPortStatsEntry OBJECT-TYPE SYNTAX HzCpWirelessPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a Wireless Interface Modem" INDEX { hzCpWirelessPortStatsIndex } ::= { hzCpWirelessPortStatsTable 1 } HzCpWirelessPortStatsEntry ::= SEQUENCE { hzCpWirelessPortStatsIndex INTEGER, hzCpWirelessPortTxBlocks Counter64, hzCpWirelessPortRxBlocksOKs Counter64, hzCpWirelessPortRxBlocksErrors Counter64 } hzCpWirelessPortStatsIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1), wireless-port-2 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode." ::= { hzCpWirelessPortStatsEntry 1 } hzCpWirelessPortTxBlocks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Modem blocks transmitted." ::= { hzCpWirelessPortStatsEntry 2 } hzCpWirelessPortRxBlocksOKs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Modem blocks received." ::= { hzCpWirelessPortStatsEntry 3 } hzCpWirelessPortRxBlocksErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Modem blocks received in error." ::= { hzCpWirelessPortStatsEntry 4 } hzCpWirelessAggTxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Ethernet Combiner frames sent." ::= { hzCpWirelessAggregateStats 1 } hzCpWirelessAggRxFramesOK OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of good Ethernet Combiner frames received." ::= { hzCpWirelessAggregateStats 2 } hzCpWirelessAggRxFramesErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Ethernet Combiner frames received in error." ::= { hzCpWirelessAggregateStats 3 } hzCpWirelessAggRxFramesDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The current count of Ethernet Combiner frames in the queue that were discarded." ::= { hzCpWirelessAggregateStats 4 } hzCpWirelessPortLcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpWirelessPortLcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Modem Statistics" ::= { hzCpWirelessInterfaceModems 4 } hzCpWirelessPortLcStatsEntry OBJECT-TYPE SYNTAX HzCpWirelessPortLcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for a Wireless Interface Modem" INDEX { hzCpWirelessPortLcStatsIndex } ::= { hzCpWirelessPortLcStatsTable 1 } HzCpWirelessPortLcStatsEntry ::= SEQUENCE { hzCpWirelessPortLcStatsIndex INTEGER, hzCpWirelessPortLcTxBlocks Counter32, hzCpWirelessPortLcRxBlocksOKs Counter32, hzCpWirelessPortLcRxBlocksErrors Counter32 } hzCpWirelessPortLcStatsIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1), wireless-port-2 (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. Wireless-port-1 contains the local aggregate wireless statistics and wireless-port-2 contains the partner aggregate wireless statistics only in redundancy configuration mode." ::= { hzCpWirelessPortLcStatsEntry 1 } hzCpWirelessPortLcTxBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Modem blocks transmitted." ::= { hzCpWirelessPortLcStatsEntry 2 } hzCpWirelessPortLcRxBlocksOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Modem blocks received." ::= { hzCpWirelessPortLcStatsEntry 3 } hzCpWirelessPortLcRxBlocksErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Modem blocks received in error." ::= { hzCpWirelessPortLcStatsEntry 4 } hzCpWirelessAggLcTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Ethernet Combiner frames sent." ::= { hzCpWirelessAggregateLcStats 1 } hzCpWirelessAggLcRxFramesOK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of good Ethernet Combiner frames received." ::= { hzCpWirelessAggregateLcStats 2 } hzCpWirelessAggLcRxFramesErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Ethernet Combiner frames received in error." ::= { hzCpWirelessAggregateLcStats 3 } hzCpWirelessAggLcRxFramesDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A low capacity 32-bit counter representing the current count of Ethernet Combiner frames in the queue that were discarded." ::= { hzCpWirelessAggregateLcStats 4 } -- -- RADIO INFORMATION -- hzCpRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Wireless Interface Radios" ::= { hzCpWirelessInterfaceRadios 1 } hzCpRadioEntry OBJECT-TYPE SYNTAX HzCpRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Wireless Interface Radio" INDEX { hzCpRadioIndex } ::= { hzCpRadioTable 1 } HzCpRadioEntry ::= SEQUENCE { hzCpRadioIndex INTEGER, hzCpRadioDescription DisplayString, hzCpRadioOperStatus INTEGER, hzCpRadioTxGain Integer32, hzCpRadioRxGain Integer32, hzCpRadioReset Integer32, hzCpRadioTransmitPowerdBm Integer32, hzCpRadioPowerOption INTEGER, hzCpRadioTxState INTEGER, hzCpRadioActualTxState INTEGER, hzCpRadioTemperature Integer32, hzCpRadioMaxTransmitPowerdBm Integer32, hzCpRadioActualTransmitPowerdBm Integer32 } hzCpRadioIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpRadioEntry 1 } hzCpRadioDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the radio." ::= { hzCpRadioEntry 2 } hzCpRadioOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), testing (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may be in progress" ::= { hzCpRadioEntry 3 } hzCpRadioTxGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gain of the radio in the transmit chain. Indicates the gain in dB." ::= { hzCpRadioEntry 4 } hzCpRadioRxGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gain of the radio in the receive chain. Indicates the gain in dB." ::= { hzCpRadioEntry 5 } hzCpRadioReset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Writing 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be polled by the user after this object is written to, to verify that the radio card has been reset." ::= { hzCpRadioEntry 6 } hzCpRadioTransmitPowerdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This defines the programmed transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. Notes: - If HAAM is enabled, transmit power cannot be changed. - Programmed and Actual transmit power may differ - see hzCpRadioActualTransmitPower." DEFVAL { 0 } ::= { hzCpRadioEntry 7 } hzCpRadioPowerOption OBJECT-TYPE SYNTAX INTEGER { normal (1), highPower (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the power option of the radio: normal or high power." ::= { hzCpRadioEntry 8 } hzCpRadioTxState OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the power option of the radio: normal or high power." ::= { hzCpRadioEntry 9 } hzCpRadioActualTxState OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the actual transmit state of the radio." ::= { hzCpRadioEntry 10 } hzCpRadioTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius." ::= { hzCpRadioEntry 11 } hzCpRadioMaxTransmitPowerdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum Transmit Power allowed." ::= { hzCpRadioEntry 12 } hzCpRadioActualTransmitPowerdBm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the actual transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. This value will be undefined: - If the radio is operational and muted. - If the radio is not operational. - If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99." ::= { hzCpRadioEntry 13 } hzCpRadio1FreqGroupSelected OBJECT-TYPE SYNTAX INTEGER { txLow (1), txHigh (2), none (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency group selected for Radio 1. The frequency subbands are divided into frequency groups txHigh and txLow. A system must have one node configured to txLow and the other node configure to txHigh" ::= { hzCpWirelessInterfaceRadio1Frequencies 1 } hzCpRadio1BandTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRadio1BandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of radio bands for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band" ::= { hzCpWirelessInterfaceRadio1Frequencies 2 } hzCpRadio1BandEntry OBJECT-TYPE SYNTAX HzCpRadio1BandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A radio band entry containing all the radio band values" INDEX { hzCpRadio1BandIndex } ::= { hzCpRadio1BandTable 1 } HzCpRadio1BandEntry ::= SEQUENCE { hzCpRadio1BandIndex Integer32, hzCpRadio1BandId Integer32, hzCpRadio1BandName DisplayString, hzCpRadio1BandProgrammed INTEGER } hzCpRadio1BandIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each radio band. " ::= { hzCpRadio1BandEntry 1 } hzCpRadio1BandId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "radio band ID. Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes." ::= { hzCpRadio1BandEntry 2 } hzCpRadio1BandName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The radio band name." ::= { hzCpRadio1BandEntry 3 } hzCpRadio1BandProgrammed OBJECT-TYPE SYNTAX INTEGER { active (1), notActive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system." DEFVAL { notActive } ::= { hzCpRadio1BandEntry 4 } hzCpRadio1FreqTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRadio1FreqEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of txHigh frequency settings for Radio 1" ::= { hzCpWirelessInterfaceRadio1Frequencies 3 } hzCpRadio1FreqEntry OBJECT-TYPE SYNTAX HzCpRadio1FreqEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A TX-High or TX-Low Frequency entry containing all the frequency values" INDEX { hzCpRadio1FreqIndex } ::= { hzCpRadio1FreqTable 1 } HzCpRadio1FreqEntry ::= SEQUENCE { hzCpRadio1FreqIndex Integer32, hzCpRadio1FreqChannelIndex DisplayString, hzCpRadio1FreqTransmitRfFrequency Integer32, hzCpRadio1FreqReceiveRfFrequency Integer32, hzCpRadio1FreqProgrammed INTEGER } hzCpRadio1FreqIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each frequency channel. " ::= { hzCpRadio1FreqEntry 1 } hzCpRadio1FreqChannelIndex OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The channel index for the frequency." ::= { hzCpRadio1FreqEntry 2 } hzCpRadio1FreqTransmitRfFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The RF TX frequency in KHz." ::= { hzCpRadio1FreqEntry 3 } hzCpRadio1FreqReceiveRfFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The RF RX frequency in KHz." ::= { hzCpRadio1FreqEntry 4 } hzCpRadio1FreqProgrammed OBJECT-TYPE SYNTAX INTEGER { active (1), notActive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system." DEFVAL { notActive } ::= { hzCpRadio1FreqEntry 5 } hzCpRadio1ProgrammedFrequencyChannel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The channel that has been programmed for Radio 1." ::= { hzCpRadio1ProgrammedFrequency 1 } hzCpRadio1ProgrammedFrequencyTxRf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The programmed RF TX frequency in KHz." ::= { hzCpRadio1ProgrammedFrequency 2 } hzCpRadio1ProgrammedFrequencyRxRf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The RF RX frequency in KHz." ::= { hzCpRadio1ProgrammedFrequency 3 } hzCpSystemModeTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpSystemModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of system mode settings. Radio Band needs to be configured before the system mode." ::= { hzCpWirelessInterfaceRadioFrequencies 2 } hzCpSystemModeEntry OBJECT-TYPE SYNTAX HzCpSystemModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system mode entry containing all the system mode values" INDEX { hzCpSystemModeIndex } ::= { hzCpSystemModeTable 1 } HzCpSystemModeEntry ::= SEQUENCE { hzCpSystemModeIndex Integer32, hzCpSystemModeId Integer32, hzCpSystemModeName DisplayString, hzCpSystemModeProgrammed INTEGER } hzCpSystemModeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each system mode. " ::= { hzCpSystemModeEntry 1 } hzCpSystemModeId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "System mode Id. " ::= { hzCpSystemModeEntry 2 } hzCpSystemModeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The system mode name." ::= { hzCpSystemModeEntry 3 } hzCpSystemModeProgrammed OBJECT-TYPE SYNTAX INTEGER { active (1), notActive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the operating system mode for the modem. Notes: Set Radio Band before System Mode Only 1 index may be selected. Changing this option might require a system reset unless the user has permission to set hzCpApplyFrequencyChangesToSystem after the changes." DEFVAL { notActive } ::= { hzCpSystemModeEntry 4 } hzCpApplyFrequencyChangesToSystem OBJECT-TYPE SYNTAX INTEGER { apply (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If system allows, setting this oid applies the radio band, system mode and frequency changes dynamilcally and a system reset can be avoided. " ::= { hzCpWirelessInterfaceRadioFrequencies 3 } -- ---------------------------- -- hzCpWirelessInterfaceAntenna -- ---------------------------- hzCpAntennaDiameter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the diameter of the antenna represented in inches." ::= { hzCpWirelessInterfaceAntenna 1 } hzCpAntennaTilt OBJECT-TYPE SYNTAX INTEGER { unknown (1), vertical (2), horizontal (3), flat (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the position of the antenna for radio 1." ::= { hzCpWirelessInterfaceAntenna 2 } hzCpDroppedFramesThresholdParams OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command." ::= { hzCpAggregatedThresholdAlarm 1 } hzCpBwUtilizationThresholdParams OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command." ::= { hzCpAggregatedThresholdAlarm 2 } hzCpQBasedThresholdAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpQBasedThresholdAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Q based Threshold Alarm settings" ::= { hzCpQBasedThresholdAlarm 1 } hzCpQBasedThresholdAlarmEntry OBJECT-TYPE SYNTAX HzCpQBasedThresholdAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry based queues." INDEX { hzCpQBasedThresholdIndex } ::= { hzCpQBasedThresholdAlarmTable 1 } HzCpQBasedThresholdAlarmEntry ::= SEQUENCE { hzCpQBasedThresholdIndex INTEGER, hzCpQBasedDepthThresholdParams DisplayString, hzCpQBasedDroppedFramesThresholdParams DisplayString } hzCpQBasedThresholdIndex OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for one of the 8 queues" ::= { hzCpQBasedThresholdAlarmEntry 1 } hzCpQBasedDepthThresholdParams OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded." ::= { hzCpQBasedThresholdAlarmEntry 2 } hzCpQBasedDroppedFramesThresholdParams OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded." ::= { hzCpQBasedThresholdAlarmEntry 3 } hzCpWirelessInterfaceThresholdAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpWirelessInterfaceThresholdAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of wireless threshold crossing alarms" ::= { hzCpThresholdAlarmConfig 3 } hzCpWirelessInterfaceThresholdAlarmEntry OBJECT-TYPE SYNTAX HzCpWirelessInterfaceThresholdAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of wireless threshold crossing alarm" INDEX { hzCpWirelessInterfaceThresholdAlarmIndex } ::= { hzCpWirelessInterfaceThresholdAlarmTable 1 } HzCpWirelessInterfaceThresholdAlarmEntry ::= SEQUENCE { hzCpWirelessInterfaceThresholdAlarmIndex INTEGER, hzCpWirelessInterfaceRslThresholdParams DisplayString, hzCpWirelessInterfaceSnrThreshold DisplayString } hzCpWirelessInterfaceThresholdAlarmIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for each wireless port" ::= { hzCpWirelessInterfaceThresholdAlarmEntry 1 } hzCpWirelessInterfaceRslThresholdParams OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command." ::= { hzCpWirelessInterfaceThresholdAlarmEntry 2 } hzCpWirelessInterfaceSnrThreshold OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "A read-write string specifing the modem SNR threshold." ::= { hzCpWirelessInterfaceThresholdAlarmEntry 3 } hzCpAlarmConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpAlarmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of alarm configuration" ::= { hzCpAlarms 2 } hzCpAlarmConfigEntry OBJECT-TYPE SYNTAX HzCpAlarmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of alarm configuration" INDEX { hzCpAlarmConfigIndex, hzCpAlarmInstanceIndex } ::= { hzCpAlarmConfigTable 1 } HzCpAlarmConfigEntry ::= SEQUENCE { hzCpAlarmConfigIndex INTEGER, hzCpAlarmInstanceIndex Unsigned32, hzCpAlarmConfigSeverity INTEGER, hzCpAlarmConfigState INTEGER } hzCpAlarmConfigIndex OBJECT-TYPE SYNTAX INTEGER { linkDown (1), peerAuthenticationFailure (2), haamConfigMismatch (3), haamOnLowModulation (4), atpcConfigMismatch (5), atpcAutoDisabled (6), sntpUnreachable (7), freqFileInvalid (8), aggregateDroppedFramesThreshold (9), queueDroppedFramesThreshold (10), bwUtilizationThreshold (11), queueDepthThreshold (12), rlsConfigMismatch (13), rlsShutdownActivated (14), rlsQBasedShutdown (15), modemRxLossOfSignal (16), modemSnrBelowThreshold (17), modemEqStressAboveThreshold (18), rslBelowThershold (19), radioSynthLostLock (20), radioCalTableUnavailable (21), radioCurrentOutOfLimits (22), radioPowerAmp (23), tempOutOfLimits (24), redundancyConfigMismatch (25), redundancyActiveOnSecondary (26), redundancyOperatingInForcedSwitch (27), redundancyEnetCrossLinkActive (28), redundancyActiveUsingPartnerWLink (29), redundancyStandbyWLinkInUse (30), redundancyStandbyOnPrimary (31), x2DeliveringHalfCapacity (32), bncSignalNotDetected (33), ethernetSpeedReduced (34), synceLostLock (35), synceSecondarySourceInUse (36), invalidSysConfig (37), mibChangeNotSaved (38), transmitterLossOfSync (39), radioLinearityCalError (40), synceConfigMismatch (41), cryptoPowerUpTestsFailed (42), cyptoConfigMismatch (43) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each alarm." ::= { hzCpAlarmConfigEntry 1 } hzCpAlarmInstanceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each instance of an alarm." ::= { hzCpAlarmConfigEntry 2 } hzCpAlarmConfigSeverity OBJECT-TYPE SYNTAX INTEGER { minor (1), major (2), critical (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of the alarm as minor, major or critical." ::= { hzCpAlarmConfigEntry 3 } hzCpAlarmConfigState OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the alarm which can be either enabled or disabled." ::= { hzCpAlarmConfigEntry 4 } hzCpAlarmStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of alarm status" ::= { hzCpAlarms 3 } hzCpAlarmStatusEntry OBJECT-TYPE SYNTAX HzCpAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of alarm status" INDEX { hzCpAlarmStatusIndex, hzCpAlarmStatusInstanceIndex } ::= { hzCpAlarmStatusTable 1 } HzCpAlarmStatusEntry ::= SEQUENCE { hzCpAlarmStatusIndex INTEGER, hzCpAlarmStatusInstanceIndex Unsigned32, hzCpAlarmStatus INTEGER, hzCpAlarmRaisedDateAndTime DateAndTime, hzCpAlarmClearedDateAndTime DateAndTime } hzCpAlarmStatusIndex OBJECT-TYPE SYNTAX INTEGER { linkDown (1), peerAuthenticationFailure (2), haamConfigMismatch (3), haamOnLowModulation (4), atpcConfigMismatch (5), atpcAutoDisabled (6), sntpUnreachable (7), freqFileInvalid (8), aggregateDroppedFramesThreshold (9), queueDroppedFramesThreshold (10), bwUtilizationThreshold (11), queueDepthThreshold (12), rlsConfigMismatch (13), rlsShutdownActivated (14), rlsQBasedShutdown (15), modemRxLossOfSignal (16), modemSnrBelowThreshold (17), modemEqStressAboveThreshold (18), rslBelowThershold (19), radioSynthLostLock (20), radioCalTableUnavailable (21), radioCurrentOutOfLimits (22), radioPowerAmp (23), tempOutOfLimits (24), redundancyConfigMismatch (25), redundancyActiveOnSecondary (26), redundancyOperatingInForcedSwitch (27), redundancyEnetCrossLinkActive (28), redundancyActiveUsingPartnerWLink (29), redundancyStandbyWLinkInUse (30), redundancyStandbyOnPrimary (31), x2DeliveringHalfCapacity (32), bncSignalNotDetected (33), ethernetSpeedReduced (34), synceLostLock (35), synceSecondarySourceInUse (36), invalidSysConfig (37), mibChangeNotSaved (38), transmitterLossOfSync (39), radioLinearityCalError (40), synceConfigMismatch (41), cryptoPowerUpTestsFailed (42), cryptoConfigMismatch (43) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each alarm." ::= { hzCpAlarmStatusEntry 1 } hzCpAlarmStatusInstanceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each instance of an alarm." ::= { hzCpAlarmStatusEntry 2 } hzCpAlarmStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the alarm exists or not." ::= { hzCpAlarmStatusEntry 3 } hzCpAlarmRaisedDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the date and time when the alarm was raised. If the alarm never occured, the value shows as zero." ::= { hzCpAlarmStatusEntry 4 } hzCpAlarmClearedDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the date and time when the alarm was cleared. If the alarm never occured, the value shows as zero." ::= { hzCpAlarmStatusEntry 5 } -- -- Giga Ethernet Qos -- hzCpQosEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether QOS is enabled." DEFVAL { disabled } ::= { hzCpQos 1 } hzCpCosType OBJECT-TYPE SYNTAX INTEGER { cosVlan (1), cosQinQiTag (2), cosQinQoTag (3), cosDscp (4), cosMplsExp (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag." DEFVAL { cosVlan } ::= { hzCpQos 2 } -- -- 802.1p priorities assignment. -- hzCpCosQinQiTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100." ::= { hzCpQos 3 } hzCpCosQinQoTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100." ::= { hzCpQos 4 } -- -- Queue operation mode -- hzCpCosExpediteQueue OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs must be equal to 100%. In this mode higher priority queues will be serviced first until that queue is emptied or the defined CIR is reached." DEFVAL { disabled } ::= { hzCpQos 5 } -- -- user queues configuration. -- hzCpCosQueueCIR OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled any queue can be assigned 100% bandwidth. When expedite queue is disabled the sum of CIR of all queues should be 100." ::= { hzCpQos 6 } hzCpCosQueueCBS OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Comitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Minimum CBS assignable to any queue is 1." ::= { hzCpQos 7 } -- -- hzCpCosWfq -- hzCpQosPolicy OBJECT-TYPE SYNTAX INTEGER { strict-priority (1), wfq (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Qos policy." ::= { hzCpQos 8 } hzCpCosWfqWeight OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the queues proportional to their weight. The weights have values from 0-15, where 0 is the lowest weight and 15 is the highest weight. Setting the Cos weight example: 1 2 3 4." ::= { hzCpQos 9 } hzCpCosNumPriorityQueues OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "When expedite queue is enabled, user can set the number of priority queues. The default value for number of priority queues are 2, maximum is 4 and minimum is 1. " ::= { hzCpQos 10 } hzCpCosCutThroughQueue OBJECT-TYPE SYNTAX INTEGER { off (1), q1 (2), q2 (3), q3 (4), q4 (5), q5 (6), q6 (7), q7 (8), q8 (9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Cut through queue can be enabled or disabled. Any one of the 8 queues can be selected as cut through queue." ::= { hzCpQos 11 } hzCpQosPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpQosPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Qos Settings per port" ::= { hzCpQos 12 } hzCpQosPortConfigEntry OBJECT-TYPE SYNTAX HzCpQosPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Qos setting per port" INDEX { hzCpCosPortIndex } ::= { hzCpQosPortConfigTable 1 } HzCpQosPortConfigEntry ::= SEQUENCE { hzCpCosPortIndex INTEGER, hzCpCosQueueMapping DisplayString, hzCpCosDefaultValue Integer32 } hzCpCosPortIndex OBJECT-TYPE SYNTAX INTEGER { enet-port-1 (1), enet-port-2 (2), enet-port-3 (3), enet-port-4 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name identifying each enet port" ::= { hzCpQosPortConfigEntry 1 } hzCpCosQueueMapping OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User queue assignments for CoS values 0 to 7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. CoS to queue mapping example: 1 7 2 8 3 6 1 4." ::= { hzCpQosPortConfigEntry 2 } hzCpCosDefaultValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Default CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag." DEFVAL { 0 } ::= { hzCpQosPortConfigEntry 3 } hzCpCosUserFlowDepTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpCosUserFlowDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of Cos user flow setting" ::= { hzCpQos 13 } hzCpCosUserFlowDepEntry OBJECT-TYPE SYNTAX HzCpCosUserFlowDepEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry of Cos user flow setting" INDEX { hzCpCosUserFlowIndexDep } ::= { hzCpCosUserFlowDepTable 1 } HzCpCosUserFlowDepEntry ::= SEQUENCE { hzCpCosUserFlowIndexDep INTEGER, hzCpCosUserFlowStateDep DisplayString } hzCpCosUserFlowIndexDep OBJECT-TYPE SYNTAX INTEGER { flow1 (1), flow2 (2), flow3 (3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by hzCpCosUserFlowMappingIndex." ::= { hzCpCosUserFlowDepEntry 1 } hzCpCosUserFlowStateDep OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is deprecated by entries in hzCpCosUserFlowMappingTable." ::= { hzCpCosUserFlowDepEntry 2 } hzCpCosUserClassTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpCosUserClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Cos user class setting." ::= { hzCpQos 14 } hzCpCosUserClassEntry OBJECT-TYPE SYNTAX HzCpCosUserClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Cos user class setting." INDEX { hzCpCosUserClassIndex } ::= { hzCpCosUserClassTable 1 } HzCpCosUserClassEntry ::= SEQUENCE { hzCpCosUserClassIndex INTEGER, hzCpCosUserClassOffset Integer32, hzCpCosUserClassValue DisplayString, hzCpCosUserClassMask DisplayString } hzCpCosUserClassIndex OBJECT-TYPE SYNTAX INTEGER { c1 (1), c2 (2), c3 (3), c4 (4), c5 (5), c6 (6), c7 (7), c8 (8), c9 (9), c10 (10), c11 (11), c12 (12), c13 (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name specifying user class group." ::= { hzCpCosUserClassEntry 1 } hzCpCosUserClassOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the user class offset. The valid range is 0-31." ::= { hzCpCosUserClassEntry 2 } hzCpCosUserClassValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string specifying the user class value in hex format. The string must hold even number of characters." ::= { hzCpCosUserClassEntry 3 } hzCpCosUserClassMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string specifying the user class mask in hex format. The string must hold even number of characters and have the same length as the user class value." ::= { hzCpCosUserClassEntry 4 } hzCpCosUserFlowFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpCosUserFlowFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Cos user flow filter setting." ::= { hzCpQos 15 } hzCpCosUserFlowFilterEntry OBJECT-TYPE SYNTAX HzCpCosUserFlowFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Cos user flow filter setting." INDEX { hzCpCosUserFlowFilterIndex } ::= { hzCpCosUserFlowFilterTable 1 } HzCpCosUserFlowFilterEntry ::= SEQUENCE { hzCpCosUserFlowFilterIndex INTEGER, hzCpCosUserFlowFilter DisplayString } hzCpCosUserFlowFilterIndex OBJECT-TYPE SYNTAX INTEGER { flow1 (1), flow2 (2), flow3 (3), flow4 (4), flow5 (5), flow6 (6), flow7 (7), flow8 (8), flow9 (9), flow10 (10), flow11 (11), flow12 (12), flow13 (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name specifying user flow group." ::= { hzCpCosUserFlowFilterEntry 1 } hzCpCosUserFlowFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string specifying the user class combination. For example a user flow can be configured to include c1 c5. If a user class hasn't been assigned a value and mask, the class can't be part of the user flow filter. " ::= { hzCpCosUserFlowFilterEntry 2 } hzCpCosUserFlowMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpCosUserFlowMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Cos user flow mapping setting." ::= { hzCpQos 16 } hzCpCosUserFlowMappingEntry OBJECT-TYPE SYNTAX HzCpCosUserFlowMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Cos user flow mapping setting." INDEX { hzCpCosUserFlowMappingIndex } ::= { hzCpCosUserFlowMappingTable 1 } HzCpCosUserFlowMappingEntry ::= SEQUENCE { hzCpCosUserFlowMappingIndex INTEGER, hzCpCosUserFlowEnable INTEGER, hzCpCosUserFlowP1Queue INTEGER, hzCpCosUserFlowP1TargetPort INTEGER, hzCpCosUserFlowP2Queue INTEGER, hzCpCosUserFlowP2TargetPort INTEGER, hzCpCosUserFlowP3Queue INTEGER, hzCpCosUserFlowP3TargetPort INTEGER, hzCpCosUserFlowP4Queue INTEGER, hzCpCosUserFlowP4TargetPort INTEGER } hzCpCosUserFlowMappingIndex OBJECT-TYPE SYNTAX INTEGER { flow1 (1), flow2 (2), flow3 (3), flow4 (4), flow5 (5), flow6 (6), flow7 (7), flow8 (8), flow9 (9), flow10 (10), flow11 (11), flow12 (12), flow13 (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name specifying user flow group." ::= { hzCpCosUserFlowMappingEntry 1 } hzCpCosUserFlowEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables a CoS user flow." ::= { hzCpCosUserFlowMappingEntry 2 } hzCpCosUserFlowP1Queue OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the selected queue for P1." ::= { hzCpCosUserFlowMappingEntry 3 } hzCpCosUserFlowP1TargetPort OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the target egress port for P1." ::= { hzCpCosUserFlowMappingEntry 4 } hzCpCosUserFlowP2Queue OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the selected queue for P2." ::= { hzCpCosUserFlowMappingEntry 5 } hzCpCosUserFlowP2TargetPort OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the target egress port for P2." ::= { hzCpCosUserFlowMappingEntry 6 } hzCpCosUserFlowP3Queue OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the selected queue for P3." ::= { hzCpCosUserFlowMappingEntry 7 } hzCpCosUserFlowP3TargetPort OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the target egress port for P3." ::= { hzCpCosUserFlowMappingEntry 8 } hzCpCosUserFlowP4Queue OBJECT-TYPE SYNTAX INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the selected queue for P4." ::= { hzCpCosUserFlowMappingEntry 9 } hzCpCosUserFlowP4TargetPort OBJECT-TYPE SYNTAX INTEGER { p1 (1), p2 (2), p3 (3), p4 (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the target egress port for P4." ::= { hzCpCosUserFlowMappingEntry 10 } hzCpRlsMode OBJECT-TYPE SYNTAX INTEGER { off (1), basic (2), advanced (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Off, when the RLS feature is disabled. Basic when the feature is enabled but hard fault monitor is disabled. Advanced when the feature is enabled and hard fault monitor is enabled. Changing this option requires a system reset." ::= { hzCpRapidLinkShutdown 1 } hzCpRlsLinkControl OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Returns RLS user control for re-enabling failed link. If manual, then user has to explicitly enable the link. " DEFVAL { auto } ::= { hzCpRapidLinkShutdown 2 } hzCpApplyRlsMonitorParametersToSystem OBJECT-TYPE SYNTAX INTEGER { apply (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'." ::= { hzCpRapidLinkShutdown 3 } hzCpRlsLinkEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Returns RLS global link enable status as on or off. If off, the link will be shutdown." ::= { hzCpRapidLinkShutdown 4 } hzCpRlsPortGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the RLS port group configuration setting. Options are the port list and any/all. For example: p1,p3 any - RLS will trigger if either p1 or p3 is down. or p1,p2,p3 all - RLS will trigger only if all p1,p2 and p3 are down. " ::= { hzCpRapidLinkShutdown 5 } hzCpRlsShutdownPolicy OBJECT-TYPE SYNTAX INTEGER { port-down (1), eoam-msg (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicated whether to shutdown the port or send an EOAM message when RLS is triggered." ::= { hzCpRapidLinkShutdown 6 } hzCpRlsSoftFaultMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRlsSoftFaultMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of RLS Soft Fault Monitor Parameters" ::= { hzCpRapidLinkShutdown 7 } hzCpRlsSoftFaultMonitorEntry OBJECT-TYPE SYNTAX HzCpRlsSoftFaultMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RLS Parameters for Soft Fault Monitoring" INDEX { hzCpRlsSoftFaultMonitorIndex } ::= { hzCpRlsSoftFaultMonitorTable 1 } HzCpRlsSoftFaultMonitorEntry ::= SEQUENCE { hzCpRlsSoftFaultMonitorIndex INTEGER, hzCpRlsEstablishErredFrameThreshold Integer32, hzCpRlsShutdownErredFrameThreshold Integer32, hzCpRlsEstablishNumberOfSamples Integer32, hzCpRlsShutdownNumberOfSamples Integer32, hzCpRlsEstablishSamplePeriod Integer32, hzCpRlsShutdownSamplePeriod Integer32, hzCpRlsQuickShutdownSamplePeriod Integer32 } hzCpRlsSoftFaultMonitorIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpRlsSoftFaultMonitorEntry 1 } hzCpRlsEstablishErredFrameThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum erred blocks, per sample, allowed for link establishment." ::= { hzCpRlsSoftFaultMonitorEntry 2 } hzCpRlsShutdownErredFrameThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum erred blocks, per sample, allowed before link shutdown." ::= { hzCpRlsSoftFaultMonitorEntry 3 } hzCpRlsEstablishNumberOfSamples OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of consecutive good samples required before link is established." ::= { hzCpRlsSoftFaultMonitorEntry 4 } hzCpRlsShutdownNumberOfSamples OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of consecutive erred samples before link is shutdown." ::= { hzCpRlsSoftFaultMonitorEntry 5 } hzCpRlsEstablishSamplePeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold." ::= { hzCpRlsSoftFaultMonitorEntry 6 } hzCpRlsShutdownSamplePeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold." ::= { hzCpRlsSoftFaultMonitorEntry 7 } hzCpRlsQuickShutdownSamplePeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of milliseconds required to classify samples as erred." ::= { hzCpRlsSoftFaultMonitorEntry 8 } hzCpRlsHardFaultMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRlsHardFaultMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of RLS Hard Fault Monitor Parameters" ::= { hzCpRapidLinkShutdown 8 } hzCpRlsHardFaultMonitorEntry OBJECT-TYPE SYNTAX HzCpRlsHardFaultMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RLS Parameters for Hard Fault Monitoring" INDEX { hzCpRlsHardFaultMonitorIndex } ::= { hzCpRlsHardFaultMonitorTable 1 } HzCpRlsHardFaultMonitorEntry ::= SEQUENCE { hzCpRlsHardFaultMonitorIndex INTEGER, hzCpRlsHardFaultSamplePeriod Integer32, hzCpRlsHardFaultThreshold Integer32 } hzCpRlsHardFaultMonitorIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpRlsHardFaultMonitorEntry 1 } hzCpRlsHardFaultSamplePeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The period of time, in milliseconds, for which the rlsFaultThreshold is applied." ::= { hzCpRlsHardFaultMonitorEntry 2 } hzCpRlsHardFaultThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of the rlsFaultSamplePeriodMilliSeconds period which must be degraded before the link is set to the 'impaired' state." ::= { hzCpRlsHardFaultMonitorEntry 3 } hzCpRlsReceiveSignalLevelMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRlsReceiveSignalLevelMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of RLS RSL Monitor Parameters" ::= { hzCpRapidLinkShutdown 9 } hzCpRlsReceiveSignalLevelMonitorEntry OBJECT-TYPE SYNTAX HzCpRlsReceiveSignalLevelMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RLS RSL Monitor Parameters" INDEX { hzCpRlsReceiveSignalLevelMonitorIndex } ::= { hzCpRlsReceiveSignalLevelMonitorTable 1 } HzCpRlsReceiveSignalLevelMonitorEntry ::= SEQUENCE { hzCpRlsReceiveSignalLevelMonitorIndex INTEGER, hzCpRlsMakeRslMonitorRslValue DisplayString, hzCpRlsMakeRslMonitorPeriod Integer32 } hzCpRlsReceiveSignalLevelMonitorIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpRlsReceiveSignalLevelMonitorEntry 1 } hzCpRlsMakeRslMonitorRslValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active." ::= { hzCpRlsReceiveSignalLevelMonitorEntry 2 } hzCpRlsMakeRslMonitorPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The desired period, in seconds. When Link is inactive and if RSL is higher than the desiredthreshold for this period, the link will become active." ::= { hzCpRlsReceiveSignalLevelMonitorEntry 3 } hzCpRlsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpRlsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of RLS Parameters and states" ::= { hzCpRapidLinkShutdown 10 } hzCpRlsStatusEntry OBJECT-TYPE SYNTAX HzCpRlsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RLS Parameters and states" INDEX { hzCpRlsStatusIndex } ::= { hzCpRlsStatusTable 1 } HzCpRlsStatusEntry ::= SEQUENCE { hzCpRlsStatusIndex INTEGER, hzCpRlsOption DisplayString, hzCpRlsState DisplayString, hzCpRlsMismatchState DisplayString, hzCpRlsDegradeMonitorState DisplayString, hzCpRlsHardFaultMonitorState DisplayString, hzCpRlsMakeRslThresholdState DisplayString, hzCpRlsPeerRslState DisplayString, hzCpRlsRadioInterfaceState DisplayString, hzCpRlsNetworkInterfaceState DisplayString, hzCpRlsUserConfiguredEstablishFer DisplayString, hzCpRlsMinimumAchievableEstablishFer DisplayString, hzCpRlsUserConfiguredShutdownFer DisplayString, hzCpRlsMinimumAchievableShutdownFer DisplayString, hzCpRlsUserConfiguredEstablishMonitorTime Integer32, hzCpRlsActualEstablishMonitorTime Integer32, hzCpRlsUserConfiguredShutdownMonitorTime Integer32, hzCpRlsActualShutdownMonitorTime Integer32 } hzCpRlsStatusIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpRlsStatusEntry 1 } hzCpRlsOption OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; Off: Entire RLS feature disabled." ::= { hzCpRlsStatusEntry 2 } hzCpRlsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Rapid Link Shutdown State. If the state is activated, that means link is down; If the state is inactivated, that means that link is up." ::= { hzCpRlsStatusEntry 3 } hzCpRlsMismatchState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matched with peer." ::= { hzCpRlsStatusEntry 4 } hzCpRlsDegradeMonitorState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade Monitor is asserting the link up." ::= { hzCpRlsStatusEntry 5 } hzCpRlsHardFaultMonitorState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard Fault Monitor is asserting the link up." ::= { hzCpRlsStatusEntry 6 } hzCpRlsMakeRslThresholdState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal level is above the threshold value." ::= { hzCpRlsStatusEntry 7 } hzCpRlsPeerRslState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Peer RSL State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS." ::= { hzCpRlsStatusEntry 8 } hzCpRlsRadioInterfaceState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that means the radio interface is operational." ::= { hzCpRlsStatusEntry 9 } hzCpRlsNetworkInterfaceState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state is up, that means the network interface (Ethernet/PHY) is operational." ::= { hzCpRlsStatusEntry 10 } hzCpRlsUserConfiguredEstablishFer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'." ::= { hzCpRlsStatusEntry 11 } hzCpRlsMinimumAchievableEstablishFer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'." ::= { hzCpRlsStatusEntry 12 } hzCpRlsUserConfiguredShutdownFer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'." ::= { hzCpRlsStatusEntry 13 } hzCpRlsMinimumAchievableShutdownFer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'." ::= { hzCpRlsStatusEntry 14 } hzCpRlsUserConfiguredEstablishMonitorTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user" ::= { hzCpRlsStatusEntry 15 } hzCpRlsActualEstablishMonitorTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER'must be achieved to bring link into service, it's a multiple of the establish sample period required to observe the FER" ::= { hzCpRlsStatusEntry 16 } hzCpRlsUserConfiguredShutdownMonitorTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user." ::= { hzCpRlsStatusEntry 17 } hzCpRlsActualShutdownMonitorTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of the shutdown sample period required to observe the FER" ::= { hzCpRlsStatusEntry 18 } -- -- hzCpLogs -- hzCpEventLogEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether event log is enabled." DEFVAL { enabled } ::= { hzCpLogs 1 } hzCpPerfmLogEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether performance log is enabled." DEFVAL { enabled } ::= { hzCpLogs 2 } hzCpPerfmLogInterval OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds)." ::= { hzCpLogs 3 } hzCpSysLogEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether sys log is enabled." ::= { hzCpSysLog 1 } hzCpSysLogIpAddressDep OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the IP address of sys log. This object is deprecated by hzCpSysLogHostAddress. The value is 0.0.0.0 if not available or not applicable." ::= { hzCpSysLog 2 } hzCpSysLogHostDomain OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates sys log host inet address type. Valid types are ipv4 or ipv6. " ::= { hzCpSysLog 3 } hzCpSysLogHostAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates sys log host inet address octet string. This object deprecates hzCpSysLogIpAddressDep." ::= { hzCpSysLog 4 } -- ---------------------------- -- hzCpAtpc -- ---------------------------- hzCpAtpcEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled." DEFVAL { off } ::= { hzCpAtpc 1 } hzCpAtpcStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), disabledAuto (2), running (3), runningToggling (4), suspended (5), suspendedLostComm (6), suspendedRadioDown (7), suspendedRadioMuted (8), suspendedRadioLoopback (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual condition of ATPC: disabled Configuration is set to off. disabledAuto Feature was automatically disabled and is transmitting at coordinated power. running Feature is running normally. runningToggling Feature is toggling between maximum and minimum power to recover from a loss of mod sync. suspended Feature was suspended. suspendedLostComm Feature is suspended because communication is lost with peer ATPC. suspendedRadioDown Feature is suspended because the radio is down. suspendedRadioMuted Feature is suspended because the radio is muted. suspendedRadioLoopback Feature is suspended because the radio is in loopback mode." ::= { hzCpAtpc 2 } hzCpAtpcCoordinatedPowerDbm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value is the coordinated power offset from the configured transmit power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dBm." DEFVAL { 0 } ::= { hzCpAtpc 3 } hzCpAtpcCoordinatedPwrEnable OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled." DEFVAL { disabled } ::= { hzCpAtpc 4 } hzCpAtpcMinTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the minimum ATPC transmit power in dBm x 10. Valid range -990..100." ::= { hzCpAtpc 5 } hzCpAtpcMaxTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the maximum ATPC transmit power in dBm x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power." ::= { hzCpAtpc 6 } -- ---------------------------- -- hzCpHitlessAam -- ---------------------------- hzCpHitlessAamEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'." DEFVAL { off } ::= { hzCpHitlessAam 1 } hzCpHitlessAamManualMode OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Read or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'." ::= { hzCpHitlessAam 2 } hzCpHitlessAamWaitToRestore OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Read or set the Hitless Automatic Adaptive Modulation (HAAM) wait to restore duration time in seconds." ::= { hzCpHitlessAam 3 } hzCpHitlessAamOrgSpecEoamMsg OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turns on or off the Hitless Automatic Adaptive Modulation (HAAM) Organizational Specific EOAM message to peer." ::= { hzCpHitlessAam 4 } -- ---------------- -- hzCpHitlessAamTable -- ---------------- hzCpHitlessAamTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpHitlessAamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Hitless Aam." ::= { hzCpHitlessAam 5 } hzCpHitlessAamEntry OBJECT-TYPE SYNTAX HzCpHitlessAamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hitless Aam Status and Configurations." INDEX { hzCpWirelessPortIndex } ::= { hzCpHitlessAamTable 1 } HzCpHitlessAamEntry ::= SEQUENCE { hzCpWirelessPortIndex INTEGER, hzCpHitlessAamCurrentMode DisplayString } hzCpWirelessPortIndex OBJECT-TYPE SYNTAX INTEGER { wireless-port-1 (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each interface. " ::= { hzCpHitlessAamEntry 1 } hzCpHitlessAamCurrentMode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only string specifing the currently running Hitless AAM Mode." ::= { hzCpHitlessAamEntry 2 } hzCpHitlessAamModeTable OBJECT-TYPE SYNTAX SEQUENCE OF HzCpHitlessAamModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of HitlessAam available modes." ::= { hzCpHitlessAam 6 } hzCpHitlessAamModeEntry OBJECT-TYPE SYNTAX HzCpHitlessAamModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A HAAM mode entry containing all the HAAM system mode values" INDEX { hzCpHitlessAamModeIndex } ::= { hzCpHitlessAamModeTable 1 } HzCpHitlessAamModeEntry ::= SEQUENCE { hzCpHitlessAamModeIndex Integer32, hzCpHitlessAammModeName DisplayString, hzCpHitlessAamModeRange INTEGER } hzCpHitlessAamModeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each Hitless Aam mode. " ::= { hzCpHitlessAamModeEntry 1 } hzCpHitlessAammModeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Hitless Aam mode name." ::= { hzCpHitlessAamModeEntry 2 } hzCpHitlessAamModeRange OBJECT-TYPE SYNTAX INTEGER { notAllowed (1), allowed (2), max (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Hitless Aam available and max system mode. Only max option is allowed to be set in this release." DEFVAL { notAllowed } ::= { hzCpHitlessAamModeEntry 3 } -- NOTIFICATION_TYPE -- for generic traps real trap value of linkDown is 2. hzCpLinkDown NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, ifIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration." ::= { hzCpSnmpNotifications 1 } -- for generic traps real trap value of linkup is 3. hzCpLinkUp NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, ifIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up." ::= { hzCpSnmpNotifications 2 } hzCpPeerAuthenticationFailure NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link." ::= { hzCpSnmpNotifications 3 } hzCpPeerAuthenticationFailureCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. The peer node is now authenticated." ::= { hzCpSnmpNotifications 4 } hzCpHitlessAamConfigMisMatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Hitless Automatic Adaptive modulation configuration mismatch" ::= { hzCpSnmpNotifications 5 } hzCpHitlessAamConfigMisMatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Hitless Automatic Adaptive modulation configuration mismatch cleared" ::= { hzCpSnmpNotifications 6 } hzCpHitlessAamModulationLowered NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Hitless Automatic Adaptive modulation on and system running on lowest modulation" ::= { hzCpSnmpNotifications 7 } hzCpHitlessAamModulationLoweredCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Hitless Automatic Adaptive modulation on system running on higher modulation" ::= { hzCpSnmpNotifications 8 } hzCpHitlessAamModulationChangedEvent NOTIFICATION-TYPE OBJECTS { hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Hitless Automatic Adaptive has changed modulation." ::= { hzCpSnmpNotifications 9 } hzCpAtpcConfigMismatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "ATPC configuration mismatch in the Horizon Compact Plus systems. ATPC is enabled at one system, but disabled at the other system." ::= { hzCpSnmpNotifications 10 } hzCpAtpcConfigMismatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "ATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC." ::= { hzCpSnmpNotifications 11 } hzCpAtpcAutoDisabled NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "ATPC auto-disabled (transmitting at coordinated power)." ::= { hzCpSnmpNotifications 12 } hzCpAtpcAutoDisabledCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "ATPC has been enabled." ::= { hzCpSnmpNotifications 13 } hzCpNoSntpServersReachable NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Can't reach any of the SNTP servers" ::= { hzCpSnmpNotifications 14 } hzCpNoSntpServersReachableCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "At least one of SNTP servers is reachable" ::= { hzCpSnmpNotifications 15 } hzCpFrequencyFileInvalid NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "This trap is generated when the executing frequency file is invalid." ::= { hzCpSnmpNotifications 16 } hzCpAggregateDroppedFramesThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The ethernet dropped frames threshold has been detected above its threshold value." ::= { hzCpSnmpNotifications 17 } hzCpAggregateDroppedFramesThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. The ethernet dropped frames threshold is now below its threshold value." ::= { hzCpSnmpNotifications 18 } hzCpQueueDroppedFramesThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpQBasedThresholdIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The ethernet queue based dropped frames threshold has been detected above its threshold value." ::= { hzCpSnmpNotifications 19 } hzCpQueueDroppedFramesThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpQBasedThresholdIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. The ethernet queue based dropped frames threshold is now below its threshold value." ::= { hzCpSnmpNotifications 20 } hzCpBwUtilizationThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The ethernet bandwidth threshold has been detected above its threshold value." ::= { hzCpSnmpNotifications 21 } hzCpBwUtilizationThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. The ethernet bandwidth threshold is now below its threshold value." ::= { hzCpSnmpNotifications 22 } hzCpQueueDepthThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpQBasedThresholdIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The ethernet queue depth threshold has been detected above its threshold value." ::= { hzCpSnmpNotifications 23 } hzCpQueueDepthThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpQBasedThresholdIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. The ethernet queue depth threshold is now below its threshold value." ::= { hzCpSnmpNotifications 24 } hzCpRlsConfigMismatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "RLS Configuration mismatch" ::= { hzCpSnmpNotifications 25 } hzCpRlsConfigMismatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. " ::= { hzCpSnmpNotifications 26 } hzCpRlsShutdownActivated NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "RLS shutdown activated" ::= { hzCpSnmpNotifications 27 } hzCpRlsShutdownActivatedCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "RLS shutdown activated condition has cleared." ::= { hzCpSnmpNotifications 28 } hzCpRlsQueueBasedShutdownActivated NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "RLS Queue-Based shutdown is activated" ::= { hzCpSnmpNotifications 29 } hzCpRlsQueueBasedShutdownActivatedCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "RLS Queue-Based shutdown is not activated" ::= { hzCpSnmpNotifications 30 } hzCpModemRxLossOfSignalLock NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link." ::= { hzCpSnmpNotifications 31 } hzCpModemRxLossOfSignalLockCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Loss of signal lock from demodulator condition has cleared." ::= { hzCpSnmpNotifications 32 } hzCpModemSnrBelowThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes." ::= { hzCpSnmpNotifications 33 } hzCpModemSnrBelowThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "SNR performance back to normal." ::= { hzCpSnmpNotifications 34 } hzCpModemEqualizerStressThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Equalizer Stress measured within the demodulator exceeds the threshold value." ::= { hzCpSnmpNotifications 35 } hzCpModemEqualizerStressThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Equalizer Stress measured within the demodulator is within the threshold value." ::= { hzCpSnmpNotifications 36 } hzCpRslBelowThreshold NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The RSL has been detected below its minimum threshold." ::= { hzCpSnmpNotifications 37 } hzCpRslBelowThresholdCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpModemIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The condition has cleared. RSL is now above its minimum threshold." ::= { hzCpSnmpNotifications 38 } hzCpRadioSynthLostLock NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit" ::= { hzCpSnmpNotifications 39 } hzCpRadioSynthLostLockCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "The radio PLDRO/LO lost lock condition has cleared." ::= { hzCpSnmpNotifications 40 } hzCpRadioCalTableNotAvailable NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Temp comp table not available." ::= { hzCpSnmpNotifications 41 } hzCpRadioCalTableNotAvailableCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Cal table is now available." ::= { hzCpSnmpNotifications 42 } hzCpRadioDrainCurrentOutOfLimit NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio current out of limits." ::= { hzCpSnmpNotifications 43 } hzCpRadioDrainCurrentOutOfLimitCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio current out of limits cleared." ::= { hzCpSnmpNotifications 44 } hzCpRadioPowerAmplifier NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio power amplifier" ::= { hzCpSnmpNotifications 45 } hzCpRadioPowerAmplifierCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpRadioIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio power amplifier cleared" ::= { hzCpSnmpNotifications 46 } hzCpTemperatureOutOfLimit NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio temperature out of limits." ::= { hzCpSnmpNotifications 47 } hzCpTemperatureOutOfLimitCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio temperature out of limits cleared." ::= { hzCpSnmpNotifications 48 } hzCpRedundancyConfigMismatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundancy configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer." ::= { hzCpSnmpNotifications 49 } hzCpRedundancyConfigMismatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundancy configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer." ::= { hzCpSnmpNotifications 50 } hzCpRedundancyActiveOnSecondary NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Secondary unit is processing the user traffic." ::= { hzCpSnmpNotifications 51 } hzCpRedundancyActiveOnSecondaryCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Secondary unit processing the user traffic condition is cleared." ::= { hzCpSnmpNotifications 52 } hzCpRedundancyOperatingInForcedSwitch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundancy operating in either forced-active or forced-standby switch mode." ::= { hzCpSnmpNotifications 53 } hzCpRedundancyOperatingInForcedSwitchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundancy operating in either forced-active or forced-standby switch mode condition is cleared." ::= { hzCpSnmpNotifications 54 } hzCpRedundancyEnetCrossLink NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundnacy cross link." ::= { hzCpSnmpNotifications 55 } hzCpRedundancyEnetCrossLinkCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Redundancy cross link is cleared." ::= { hzCpSnmpNotifications 56 } hzCpRedundancyActiveUsingPartnerWLink NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Node is active but using its standby partner's radio to transport the data to the other end f the link. This alarm is raised on the active node." ::= { hzCpSnmpNotifications 57 } hzCpRedundancyActiveUsingPartnerWLinkCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Active node using partner wireless link condition is cleared." ::= { hzCpSnmpNotifications 58 } hzCpRedundancyStandbyWLinkInUse NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "This alarm is raised on the standby node (primary or secondary) when it's radio is used by the partner node for transporting the data to the other end of the link." ::= { hzCpSnmpNotifications 59 } hzCpRedundancyStandbyWLinkInUseCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Standby node wirless link is not used by the partner any more." ::= { hzCpSnmpNotifications 60 } hzCpRedundancyStandbyOnPrimary NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Primary node is in standby mode." ::= { hzCpSnmpNotifications 61 } hzCpRedundancyStandbyOnPrimaryCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Primary node in standby condition is cleared." ::= { hzCpSnmpNotifications 62 } hzCpX2DeliveringHalfCapacity NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "X2 operation is using single wireless link. System throughput is reduced to half." ::= { hzCpSnmpNotifications 63 } hzCpX2DeliveringHalfCapacityCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "X2 operation is back to two wireless links." ::= { hzCpSnmpNotifications 64 } hzCpBncCableSignalNotDetected NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "BNC signal is not detected. The cable may be disconnected." ::= { hzCpSnmpNotifications 65 } hzCpBncCableSignalNotDetectedCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "BNC signal error condition is cleared." ::= { hzCpSnmpNotifications 66 } hzCpEthernetSpeedReduced NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, ifIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Ethernet Speed negotiated below the Max Speed." ::= { hzCpSnmpNotifications 67 } hzCpEthernetSpeedReducedCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, ifIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Ethernet speed is set back to Max Speed." ::= { hzCpSnmpNotifications 68 } hzCpSynceLostLock NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce clock PLL lost lock" ::= { hzCpSnmpNotifications 69 } hzCpSynceLostLockCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce clock PLL restored from lost of lock" ::= { hzCpSnmpNotifications 70 } hzCpSynceSecondarySourceInUse NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce clock selected secondary source" ::= { hzCpSnmpNotifications 71 } hzCpSynceSecondarySourceInUseCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce clock selected primary source" ::= { hzCpSnmpNotifications 72 } hzCpUserSession NOTIFICATION-TYPE OBJECTS { hzCpUserSessionUserName, hzCpUserSessionUserConnectionType, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "A person has logged in to an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap." ::= { hzCpSnmpNotifications 73 } hzCpUserSessionCleared NOTIFICATION-TYPE OBJECTS { hzCpUserSessionUserName, hzCpUserSessionUserConnectionType, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap." ::= { hzCpSnmpNotifications 74 } hzCpInvalidSystemConfig NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Overall system Configuration is not valid." ::= { hzCpSnmpNotifications 75 } hzCpInvalidSystemConfigCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "System configuration is valid." ::= { hzCpSnmpNotifications 76 } hzCpMibChangeNotSaved NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Mib has been changed but not saved." ::= { hzCpSnmpNotifications 77 } hzCpMibChangeNotSavedCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Mib has been saved." ::= { hzCpSnmpNotifications 78 } hzCpTransmitterLossOfSync NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "System has detected an internal fault." ::= { hzCpSnmpNotifications 79 } hzCpTransmitterLossOfSyncCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Internal fault has cleared." ::= { hzCpSnmpNotifications 80 } hzCpRadioLinearityCalError NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio linearity calibration error." ::= { hzCpSnmpNotifications 81 } hzCpRadioLinearityCalErrorCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Radio linearity calibration error is cleared." ::= { hzCpSnmpNotifications 82 } hzCpSynceConfigMismatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce configuration mismatch with peer." ::= { hzCpSnmpNotifications 83 } hzCpSynceConfigMismatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Synce configuration mismatch is cleared." ::= { hzCpSnmpNotifications 84 } hzCpCryptoPowerUpTestsFailed NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Crypto power up tests failed." ::= { hzCpSnmpNotifications 85 } hzCpCryptoConfigMismatch NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Crypto configuration mismatch either with partner or peer. Alarm instance 2 indicates partner and 3 indicates peer." ::= { hzCpSnmpNotifications 86 } hzCpCryptoConfigMismatchCleared NOTIFICATION-TYPE OBJECTS { hzCpAlarmConfigSeverity, hzCpAlarmInstanceIndex, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "Crypto configuration mismatch is cleared. Alarm instance 2 indicates partner and 3 indicates peer." ::= { hzCpSnmpNotifications 87 } hzCpSystemTimeChange NOTIFICATION-TYPE OBJECTS { hzCpDateAndTimeForLastTimeChange, hzCpLastTimeChange, horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "System Date Time changed" ::= { hzCpSnmpNotifications 88 } hzCpCodeCheck NOTIFICATION-TYPE OBJECTS { horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "A code check correction event has occured in the system." ::= { hzCpSnmpNotifications 89 } hzCpConfigChanged NOTIFICATION-TYPE OBJECTS { horizonEquipmentOutTrapsCounter } STATUS current DESCRIPTION "" ::= { hzCpSnmpNotifications 90 } END