-- Revision 3.01 10/21/2018 MERIDIAN2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, enterprises FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC; endRunTechnologies MODULE-IDENTITY LAST-UPDATED "1810210000Z" ORGANIZATION "EndRun Technologies LLC" CONTACT-INFO "Technical Support 1-877-749-3878, support@endruntechnologies.com" DESCRIPTION "EndRun Technologies Enterprise MIB" ::= { endRunTechnologiesMIB 0 } endRunTechnologiesMIB OBJECT IDENTIFIER ::= { enterprises 13827 } -- Meridian2 GPS Product Group meridian2GPS OBJECT IDENTIFIER ::= { endRunTechnologiesMIB 14 } gntp OBJECT IDENTIFIER ::= { meridian2GPS 1 } gntptrap OBJECT IDENTIFIER ::= { gntp 0 } gps OBJECT IDENTIFIER ::= { meridian2GPS 2 } gpstrap OBJECT IDENTIFIER ::= { gps 0 } gCPUIO OBJECT IDENTIFIER ::= { meridian2GPS 3 } gPlugInOptions OBJECT IDENTIFIER ::= { meridian2GPS 4 } goptSlot1 OBJECT IDENTIFIER ::= { gPlugInOptions 1 } goptSlot2 OBJECT IDENTIFIER ::= { gPlugInOptions 2 } goptSlot3 OBJECT IDENTIFIER ::= { gPlugInOptions 3 } goptSlot4 OBJECT IDENTIFIER ::= { gPlugInOptions 4 } goptSlot5 OBJECT IDENTIFIER ::= { gPlugInOptions 5 } gptp0 OBJECT IDENTIFIER ::= { meridian2GPS 5 } gptp1 OBJECT IDENTIFIER ::= { meridian2GPS 6 } -- gntp branch of the Meridian2 GPS subtree gntpTrapLeapIndBitsChange NOTIFICATION-TYPE OBJECTS { gntpLeapIndBits } STATUS current DESCRIPTION "A gntpTrapNTPLeapIndBitsChange trap signifies that the value of the leap indicator bits contained in the NTP reply packets sent by the time server has changed. The current value of these bits is contained in the included gntpLeapIndBits. The decimal value of these bits ranges from 0 to 3: 0 is the no fault, no leap warning condition 1 is the no fault, leap second insertion warning condition 2 is the no fault, leap second deletion warning condition 3 is the unsynchronized, alarm condition" ::= { gntptrap 1 } gntpTrapStratumChange NOTIFICATION-TYPE OBJECTS { gntpStratum } STATUS current DESCRIPTION "A gntpTrapStratumChange trap signifies that the value of the stratum field contained in the NTP reply packets sent by the time server has changed. The current value is contained in the included variable, gntpStratum. The decimal value of this field ranges from 1 to 16: 1 is the synchronized, actively locked to the reference UTC source stratum 2 is the synchronized, actively locked to a network stratum 1 server stratum 16 is the unsynchronized stratum level" ::= { gntptrap 2 } gntpTimeSinceRst OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time since NTP daemon restart." ::= { gntp 1 } gntpIRQsHandled OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Interrupts handled by the NTP daemon." ::= { gntp 2 } gntpRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP request packets received by the NTP daemon." ::= { gntp 3 } gntpRxPktsByIRQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP request packets received via IRQ by the NTP daemon." ::= { gntp 4 } gntpTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP reply packets transmitted by the NTP daemon." ::= { gntp 5 } gntpSentPktsPerSecond OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NTP reply packets sent per second by the NTP daemon." ::= { gntp 6 } gntpUnSentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP reply packets unsent by the NTP daemon." ::= { gntp 7 } gntpIgnoredPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP request packets ignored by the NTP daemon." ::= { gntp 8 } gntpDroppedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of NTP request packets dropped by the NTP daemon." ::= { gntp 9 } gntpAuthFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of authentication failures detected by the NTP daemon." ::= { gntp 10 } gntpTimeFigureOfMerit OBJECT-TYPE SYNTAX INTEGER { lessthan100ns (3), lessthan1us (4), lessthan10us (5), lessthan100us (6), lessthan1ms (7), lessthan10ms (8), greaterthan10ms (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates the current estimate of the worst case time error. It is a logarithmic scale, with each increment indicating a tenfold increase in the worst case time error boundaries. The scale is referenced to a worst case time error of 100 picoseconds, equivalent to a TFOM of zero. During normal locked operation with GPS the TFOM is 3 and implies a worst case time error of 100 nanoseconds. During periods of signal loss, the GPS sub-system will compute an extrapolated worst case time error. One hour after the worst case time error has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server will cease to send stratum 1 reply packets and an Alarm LED will be energized." ::= { gntp 11 } gntpLeapIndBits OBJECT-TYPE SYNTAX INTEGER { noFaultorLeap (0), leapInsWarning (1), leapDelWarning (2), unSynchronized (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a status code indicating: normal operation, a leap second to be inserted in the last minute of the current day, a leap second to be deleted in the last second of the day or an alarm condition indicating loss of timing synchronization. The leap indicator field of NTP reply packets sent from this server is set to gntpLeapIndBits." ::= { gntp 12 } gntpSyncSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string identifying the synchronization source for this NTP server. It is one of GPS, an IP address of a stratum 1 server, or NONE. If it is NONE, then the server is not synchronized, has its Leap Indicator Bits in the Alarm state and is running at Stratum 16. If it is an IP address, then the server is operating as a stratum 2 server synchronized to the network connected stratum 1 server whose IP address is shown. Check the Stratum, Leap Indicator Bits and Time Figure of Merit for further information. NTP reply packets from this server will have the reference identifier field set to gntpSyncSource if it is GPS. Otherwise it will be set to either an IP address or 0.0.0.0 (NONE)." ::= { gntp 13 } gntpOffsetToGPSReference OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string containing the floating value of the current offset in units of seconds of the NTP server CPU clock to the GPS reference time. Positive values imply that the NTP server clock is ahead of the GPS reference time." ::= { gntp 14 } gntpStratum OBJECT-TYPE SYNTAX INTEGER { gntpStratumOne (1), gntpStratumTwo (2), gntpStratumUnsync (16) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is an integer showing the current stratum level being reported by the NTP daemon in its reply packets to clients. If it is 1, then the server is fully synchronized and delivering Stratum 1 accuracy. If it is greater than 1 and less than 16, it is synchronized to a network connected NTP server operating at one stratum lower. If it is 16, then the server is unambiguously unsynchronized. NTP clients on the network should be configured to not use the time from this server if the stratum is 16." ::= { gntp 15 } gntpVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string showing the system root file system firmware version." ::= { gntp 16 } gntpKernelVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string showing the system Linux kernel firmware version." ::= { gntp 17 } gntpOscType OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string showing the installed oscillator type. It is one of TCXO, MS-OCXO, HS-OCXO, US-OCXO, Rubidium, HS-Rubidium, US-Rubidium, Cesium or US-Cesium." ::= { gntp 18 } gntpTimeMode OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an ASCII string showing the time mode of operation for any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It DOES NOT indicate the time mode of the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC. It can be LOCAL, GPS or UTC." ::= { gntp 19 } gntpLocalOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the local time offset configured for any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT indicate the local time offset of the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC. Its units are half-hours, ranging from -25 to 25, where negative values imply that the local time is behind UTC." ::= { gntp 20 } gntpDSTStartMonth OBJECT-TYPE SYNTAX INTEGER { disabled (0), jan (1), feb (2), mar (3), apr (4), may (5), jun (6), jul (7), aug (8), sep (9), oct (10), nov (11), dec (12) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the month that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC." ::= { gntp 21 } gntpDSTStartSunday OBJECT-TYPE SYNTAX INTEGER { disabled (0), firstSunday (1), secondSunday (2), thirdSunday (3), fourthSunday (4), lastSunday (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the Sunday of the month that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC." ::= { gntp 22 } gntpDSTStartHour OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the hour that Daylight Savings Time begins. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC. It ranges from 0 to 23, where 0 is midnight." ::= { gntp 23 } gntpDSTStopMonth OBJECT-TYPE SYNTAX INTEGER { disabled (0), jan (1), feb (2), mar (3), apr (4), may (5), jun (6), jul (7), aug (8), sep (9), oct (10), nov (11), dec (12) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the month that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC." ::= { gntp 24 } gntpDSTStopSunday OBJECT-TYPE SYNTAX INTEGER { disabled (0), firstSunday (1), secondSunday (2), thirdSunday (3), fourthSunday (4), lastSunday (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the Sunday of the month that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC." ::= { gntp 25 } gntpDSTStopHour OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the hour that Daylight Savings Time ends. It affects the local time operation of any optional IRIG timecode outputs or the optional front panel vacuum fluorescent display. It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the NTP sub-system. Both of these are ALWAYS UTC. It ranges from 0 to 23, where 0 is midnight." ::= { gntp 26 } gntpCPUDieTemperature OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current CPU internal die temperature, in units of Celsius degrees in floating point notation." ::= { gntp 27 } gntpCPUFreeMemory OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the CPU Free Memory in kiloBytes." ::= { gntp 28 } gntpCPULoadAveragePerCent OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the CPU Load Average as percent of total load." ::= { gntp 29 } -- gps branch of the Meridian2 GPS subtree gpsTrapFaultStatusChange NOTIFICATION-TYPE OBJECTS { gpsFaultStatus } STATUS current DESCRIPTION "A gpsTrapFaultStatusChange trap signifies that the value of the least significant two nibbles of th fault status word reported by the GPS sub-system has changed. The current value is contained in the included gpsFaultStatus." ::= { gpstrap 1 } gpsTrapFault2StatusChange NOTIFICATION-TYPE OBJECTS { gpsFault2Status } STATUS current DESCRIPTION "A gpsTrapFault2StatusChange trap signifies that the value of the most significant two nibbles of the fault status word reported by the GPS sub-system has changed. The current value is contained in the included gpsFault2Status." ::= { gpstrap 2 } gpsTrapTimeFigureOfMeritChange NOTIFICATION-TYPE OBJECTS { gpsTimeFigureOfMerit } STATUS current DESCRIPTION "A gpsTrapTimeFigureOfMeritChange trap signifies that the value of the TFOM reported by the GPS sub-system has changed. The current value is contained in the included gpsTimeFigureOfMerit." ::= { gpstrap 3 } gpsFaultStatus OBJECT-TYPE SYNTAX BITS { gpsReceiverFlt (0), gpsNTPNotPolling (1), gpsRefTimeFlt (2), gpsReceiverCommFlt (3), gpsFLASHWriteFlt (4), gpsFPGACfgFlt (5), gpsNoSignalTimeout (6), gpsDACNearLimit (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the least significant two nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 7: DAC controlling the TCXO is near the high or low limit. Bit 6: Time Figure of Merit has been >= TFOM Fault Level for 1 hour. Bit 5: Field Programmable Gate Array (FPGA) did not configure properly. Bit 4: FLASH memory had a write fault. Bit 3: GPS receiver communication fault. Bit 2: GPS reference time fault (fails sanity checks). Bit 1: NTP daemon is not polling the GPS reference clock. Bit 0: GPS receiver fault. ATTENTION: This object is deprecated for use in snmpget queries due to a defect in reporting for one specific combination of bits. It remains in this MIB for use with the gpsTrapFaultStatusChange object, where it reports accurately. Use the new gpsFaultNibble0Status and gpsFaultNibble1Status objects for querying via snmpget." ::= { gps 1 } gpsFault2Status OBJECT-TYPE SYNTAX BITS { gpsSysPwrOvld (0), gpsNotUsed1 (1), gpsHP5071a (2), gpsPlugInOpts (3), gpsAntennaFlt (4), gpsOscPLLFlt (5), gpsSecPwrSplyFlt (6), gpsPriPwrSplyFlt (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the most significant two nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 7: Primary Redundant Power Supply is Faulting. Bit 6: Secondary Redundant Power Supply is Faulting. Bit 5: Oscillator PLL Faulting. Bit 4: GPS Antenna or Feedline is Shorted or Open. Bit 3: Plug-In Option Fault. Bit 2: HP5071A Cesium Option Fault. Bit 1: Not Used. Bit 0: Installed System Power Exceeds Maximum. ATTENTION: This object is deprecated for use in snmpget queries due to a defect in reporting for one specific combination of bits. It remains in this MIB for use with the gpsTrapFaultStatusChange object, where it reports accurately. Use the new gpsFaultNibble2Status and gpsFaultNibble3Status objects for querying via snmpget." ::= { gps 2 } gpsReceiverFaultNibble0Status OBJECT-TYPE SYNTAX BITS { gpsFLASHWriteFlt (0), gpsFPGACfgFlt (1), gpsNoSignalTimeout (2), gpsDACNearLimit (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the least significant nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the cdmastat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: GPS Receiver Main Oscillator Frequency Control DAC near high or low limit. Bit 2: Time Figure of Merit has been >= TFOM Fault Level for 1 hour. Bit 1: Field Programmable Gate Array (FPGA) Configuration Fault. Bit 0: FLASH Memory Write Fault." ::= { gps 3 } gpsReceiverFaultNibble1Status OBJECT-TYPE SYNTAX BITS { gpsMainOscFlt (0), gpsRefTimeFlt (1), gpsSynthFlt (2), gpsSynthNearLimit (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the second nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the cdmastat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: GPS Receiver Local Oscillator Synthesizer Fault. Bit 2: GPS Receiver Local Oscillator Synthesizer Near Tuning Limit. Bit 1: GPS Decoded Time Fails Sanity Checks. Bit 0: GPS Receiver Main Oscillator Fault." ::= { gps 4 } gpsReceiverFaultNibble2Status OBJECT-TYPE SYNTAX BITS { gpsNotUsed0 (0), gpsOscPLLFlt (1), gpsAntennaOpen (2), gpsAntennaShort (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the third nibble of the GPS receiver fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: GPS antenna is shorted. Bit 2: GPS antenna is open. Bit 1: Oscillator PLL Faulting. Bit 0: Not Used." ::= { gps 5 } gpsReceiverFaultNibble3Status OBJECT-TYPE SYNTAX BITS { gpsNotUsed0 (0), gpsNotUsed1 (1), gpsNotUsed2 (2), gpsNotUsed3 (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the most significant nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: Not Used. Bit 2: Not Used. Bit 1: Not Used. Bit 0: Not Used." ::= { gps 6} gpsTimeFigureOfMerit OBJECT-TYPE SYNTAX INTEGER { lessthan100ns (3), lessthan1us (4), lessthan10us (5), lessthan100us (6), lessthan1ms (7), lessthan10ms (8), greaterthan10ms (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates the current estimate of the worst case time error. It is a logarithmic scale, with each increment indicating a tenfold increase in the worst case time error boundaries. The scale is referenced to a worst case time error of 100 picoseconds, equivalent to a TFOM of zero. During normal locked operation the TFOM is 3 and implies a worst case time error of 100 nanoseconds. During periods of signal loss, the GPS sub-system will compute an extrapolated worst case time error. One hour after the worst case time error has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server will cease to send stratum 1 reply packets and an Alarm LED will be energized." ::= { gps 7 } gpsSigProcState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current GPS signal processor state. One of WRM, ACQ, LKG or LKD with WRM indicating either an OCXO or Rubidium is warming up, ACQ indicating the acquisition state and LKD the fully locked on state. This is the status of the lock of the main system timing signals to the GPS Receiver." ::= { gps 8 } gpsReceiverSigProcState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current GPS Receiver signal processor state. One of ACQ, DET, LKG, TKG or LKD with ACQ indicating the acquisition state and LKD the fully locked on state." ::= { gps 9 } gpsNumTrackSats OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of GPS satellites being tracked." ::= { gps 10 } gpsAGC OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Current 8 bit, Automatic Gain Control (AGC) DAC value. Typical values are around 150, but antenna cable length, preamplifiers and signal splitters will affect this parameter. More positive values have the effect of increasing the RF gain." ::= { gps 11 } gpsAvgCarrierToNoiseRatiodB OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current average carrier to noise ratio of all tracked satellites, in units of dB. Values less than 35 indicate weak signal conditions." ::= { gps 12 } gpsChannelTrkStat1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 1 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 13 } gpsChannelTrkStat2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 2 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 14 } gpsChannelTrkStat3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 3 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 15 } gpsChannelTrkStat4 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 4 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 16 } gpsChannelTrkStat5 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 5 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 17 } gpsChannelTrkStat6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 6 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 18 } gpsChannelTrkStat7 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 7 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 19 } gpsChannelTrkStat8 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 8 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 20 } gpsChannelTrkStat9 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 9 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 21 } gpsChannelTrkStat10 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 10 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 22 } gpsChannelTrkStat11 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 11 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 23 } gpsChannelTrkStat12 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel 12 tracking status of the GPS receiver. Information includes the Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0, then no satellite is being tracked in this channel." ::= { gps 24 } gpsLastPositionFix OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "WGS-84 latitude, longitude and height above the reference ellipsoid of the GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as much as 100 meters. This value is the last instantaneous position fix as reported by the GPS receiver. It is not averaged. The Dilution of Precision metrics, PDOP, HDOP, VDOP and TDOP are also shown. The last item, OORCnt is the Out-Of-Range count of fixes that are too far from the current user-entered or averaged reference position. If this value is non-zero, then the TRAIM algorithm is functioning to ensure that system time and output signals are not affected by erroneous data currently being received from the satellites." ::= { gps 25 } gpsReferencePosition OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "WGS-84 latitude, longitude and height above the reference ellipsoid of the GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as much as 100 meters. When the GPS Dynamic Mode is OFF or Static, this value is the result of a 24 hour average of fixes that is used to establish the precise timing reference position. It may also have been user-entered. The RMS PDOP and Average Count for the current position average are also shown. These will be zero if the unit is not operating in the position average mode." ::= { gps 26 } gpsRefPosSource OBJECT-TYPE SYNTAX DisplayString(SIZE(0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string indicating the source of the GPS antenna reference position. It is one of: USR (user-supplied), AVG (automatically determined by averaging thousands of 3-D position fixes), DYN (current un-averaged 3-D position fix, operation is in dynamic mode), UNK (unknown)." ::= { gps 27 } gpsCurrentLeapSeconds OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the current difference in seconds between GPS time and UTC time. GPS time is ahead of UTC time by this amount." ::= { gps 28 } gpsFutureLeapSeconds OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the future difference in seconds between GPS time and UTC time. Leap seconds may be inserted or deleted from the UTC timescale twice during the year: Dec 31 and June 30 at UTC midnight. If this value is the same as gpsCurrentLeapSeconds, then no leap second insertion or deletion will occur at the next possible time. If it is different, then the change will take affect at the next possible time. GPS time will be ahead of UTC time by this amount." ::= { gps 29 } gpsAlmanacLS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, LS is the current difference in seconds between GPS time and UTC time as contained in the GPS Almanac UTC data. GPS time is ahead of UTC time by this amount. For more detailed information, consult the GPS-ICD-200." ::= { gps 30 } gpsAlmanacLSF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, LSF is the future difference in seconds between GPS time and UTC time as contained in the GPS Almanac UTC data. Leap seconds may be inserted or deleted from the UTC timescale twice during the year: Dec 31 and June 30 at UTC midnight. If this value is the same as gpsAlmLS, then no leap second insertion or deletion will occur at the next possible time. If it is different, then the change will take affect at the time defined by the GPS Almanac parameters, WN_lsf and DN. GPS time will be ahead of UTC time by this amount. For more detailed information, consult the GPS-ICD-200." ::= { gps 31 } gpsAlmanacUTCWNlsf OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, WN_lsf is the GPS Week Number during which the UTC leap second offset to GPS time will transition to the Leap Second Future value. The GPS week numbers began on January 6, 1980 with week number 0. If a leap second has recently been inserted, this week number could be in the past, in which case the current and future leap seconds values will be equal. For more detailed information, consult the GPS-ICD-200." ::= { gps 32 } gpsAlmanacUTCDN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, DN is the Day Number of the week in which the UTC leap second offset to GPS time will transition to the Leap Second Future value. The GPS day numbers begin on Sunday with day number 1. The leap second insertion occurs at the end of the given day. For more detailed information, consult the GPS-ICD-200." ::= { gps 33 } gpsAlmanacA0 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the value of the a0 coefficient of the linear fit of the UTC offset to GPS time. a0 is the constant term in the equation, in units of seconds, in scientific floating point notation. The GPS and UTC timescales are separated by leap seconds and another small error, typically less than 10 nanoseconds, which is estimated using this linear fit. For more detailed information, consult the GPS-ICD-200." ::= { gps 34 } gpsAlmanacA1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the value of the a1 coefficient of the linear fit of the UTC offset to GPS time. a1 is the slope term in the equation, in units of seconds per second, in scientific floating point notation. The GPS and UTC timescales are separated by leap seconds and another small error, typically less than 10 nanoseconds, which is estimated using this linear fit. For more detailed information, consult the GPS-ICD-200." ::= { gps 35 } gpsAlmanacUTCWNt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, WN_t is the GPS Week Number during which the reference time for the linear fit equation defined by a0 and a1 occurs. It is used along with t_ot to calculate a value of GPS seconds to offset the linear fit in the time domain. For more detailed information, consult the GPS-ICD-200." ::= { gps 36 } gpsAlmanacUTCtot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, t_ot is the second of the GPS week WN_t at which time the linear fit equation defined by a0 and a1 will evaluate to a0. The seconds range from 0 at the beginning of day number 1 to 604799 at the end of day number 7. For more detailed information, consult the GPS-ICD-200." ::= { gps 37 } gpsGPSminusUTCOffsetPicoSecs OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, (GPS - UTC) is the current sub-seconds offset of the GPS timescale to the UTC timescale, computed using the received GPS almanac parameters (WN_t, t_ot, a0 and a1) and the current GPS week number and time-of-week. The units are in picoseconds. This value must be added to the current leap seconds offset to fully quantify the amount that the GPS timescale is ahead of the UTC timescale. For more detailed information, consult the GPS-ICD-200." ::= { gps 38 } gpsSubsystemVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the GPS subsystem firmware and FPGA versions." ::= { gps 39 } gpsReceiverVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the GPS receiver firmware and FPGA versions." ::= { gps 40 } gpsDynamicMode OBJECT-TYPE SYNTAX INTEGER { gpsDynModeOFF (0), gpsDynModeON (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The GPS dynamic mode is either on or off. When it is off, the server is assumed to be in a static installation. In this case, single satellite mode of operation is supported and Timing Receiver Autonomous Integrity Monitoring (TRAIM) is supported. When the setting is on, the server is assumed to be on a moving platform. In this case, minimum four satellite, 3-D operation is required and the TRAIM functionality is minimal." ::= { gps 41 } gpsCalibrationDelayNanoSecs OBJECT-TYPE SYNTAX INTEGER (-500000..500000) MAX-ACCESS read-only STATUS current DESCRIPTION "Signed integer representing the current calibration delay being applied to the timing outputs, in units of nanoseconds. Positive values indicate that the timing outputs are advanced." ::= { gps 42 } gpsCoastDuration OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Unsigned integer representing the current elapsed time since the unit lost GPS reception in units of seconds." ::= { gps 43 } gpsEstimatedTimeError OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the magnitude of the estimated time error since the unit lost GPS reception, in units of seconds in scientific floating point notation. While locked, the value is the magnitude of the measured time error relative to GPS." ::= { gps 44 } gpsMeasuredTimeError OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the measured time error of the timing outputs relative to GPS, in units of seconds in scientific floating point notation. While coasting, the value is the last measured value prior to losing GPS reception." ::= { gps 45 } gpsMeasurementTimeDeviation OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the time deviation (TDEV) of the GPS measurement data, in units of seconds in scientific floating point notation. While coasting, the value is the last computed value prior to losing GPS reception." ::= { gps 46 } gpsOSCDAC OBJECT-TYPE SYNTAX INTEGER (0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "Current 20 bit, System Voltage Controlled Oscillator DAC value. Typical range is 320000 to 640000, where more positive numbers have the effect of raising the oscillator frequency." ::= { gps 47 } gpsMeasuredOscillatorAgeing OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the ageing rate per day of the installed osc- illator, in scientific floating point notation. It is computed via linear regression and requires several hours following initial lock to GPS to see the first update. While coasting, the value is the last computed value prior to losing GPS reception." ::= { gps 48 } gpsControlLoopTimeConstant OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current equivalent averaging time of the oscillator control loop, in units of seconds in floating point notation. The value is dynamically updated based on the stability of the oscillator." ::= { gps 49 } gpsInternalTemperature OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current internal chassis temperature, in units of Celsius degrees in floating point notation. A value is only available when the installed oscillator is an OCXO or Rubidium." ::= { gps 50 } gpsAntennaFaultMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The GPS antenna fault mask is either on or off. When it is off, the server will set the Antenna Fault Bit in the Fault Status Byte if an improper antenna impedance is detected. When the setting is on, the server will not set the Antenna Fault Bit in the Fault Status Byte if an improper antenna impedance is detected." ::= { gps 51 } gpsSignalLossFaultMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The GPS signal loss fault mask is either on or off. When it is off, the server will set the Signal Loss Fault Bit in the Fault Status Byte one hour after TFOM reaches the TFOM Fault Level. When the setting is on, the server will not set the Signal Loss Fault Bit in the Fault Status Byte one hour or more after TFOM reaches TFOM Fault level." ::= { gps 52 } gpsPrimaryPowerFaultAlarmMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Primary Power input fault alarm mask is either on or off. When it is on, the server will not assert an Alarm condition on a fault in the Primary Power supply. Unlike other fault masks, the fault condition will continue to be visible in the Fault Status Byte. This mask capability is useful when performing system tests when only a single power input is available and an alarm would be undesirable. When the setting is off, the server will assert an Alarm condition in addition to setting the appropriate bit in the Fault Status Byte." ::= { gps 53 } gpsSecondaryPowerFaultAlarmMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Secondary Power input fault alarm mask is either on or off. When it is on, the server will not assert an Alarm condition on a fault in the Secondary Power supply. Unlike other fault masks, the fault condition will continue to be visible in the Fault Status Byte. This mask capability is useful when performing system tests when only a single power input is available and an alarm would be undesirable. When the setting is off, the server will assert an Alarm condition in addition to setting the appropriate bit in the Fault Status Byte." ::= { gps 54 } gpsTimeFigureOfMeritFaultLevel OBJECT-TYPE SYNTAX INTEGER { lessthan1us (4), lessthan10us (5), lessthan100us (6), lessthan1ms (7), lessthan10ms (8), greaterthan10ms (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Time Figure of Merit (TFOM) Fault Level ranges from 4 to 9 and indicates the current threshold TFOM value for setting the Signal Loss Bit in the Fault Status byte. During normal locked operation the TFOM is 3 and implies a worst case time error of 100 nanoseconds. The factory default TFOM Fault Level is 9. During periods of signal loss, the GPS sub-system will compute an extrapolated worst case time error. One hour after the worst case time error has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server will cease to send stratum 1 reply packets and an Alarm LED will be energized." ::= { gps 55 } gpsInhibitOutputsMode OBJECT-TYPE SYNTAX INTEGER { gpsInhibitOutputsModeOFF (0), gpsInhibitOutputsModeON (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Inhibit Outputs mode is either on or off. When it is on, the timebase will inhibit the timing signal outputs prior to initial lock to the GPS receiver. When it is off, all timings outputs will be on at all times, even prior to to initial lock." ::= { gps 56 } gpsAlmanacIonoAlpha0 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient alpha0 in floating point notation." ::= { gps 57 } gpsAlmanacIonoAlpha1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient alpha1 in floating point notation." ::= { gps 58 } gpsAlmanacIonoAlpha2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient alpha2 in floating point notation." ::= { gps 59 } gpsAlmanacIonoAlpha3 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient alpha3 in floating point notation." ::= { gps 60 } gpsAlmanacIonoBeta0 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient beta0 in floating point notation." ::= { gps 61 } gpsAlmanacIonoBeta1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient beta1 in floating point notation." ::= { gps 62 } gpsAlmanacIonoBeta2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient beta2 in floating point notation." ::= { gps 63 } gpsAlmanacIonoBeta3 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current GPS broadcast ionospheric model coefficient beta3 in floating point notation." ::= { gps 64 } gpsAlmanacIonoWNa OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, WN_a is the GPS Week Number of the almanac containing the current set of Ionospheric model coefficients. For more detailed information, consult the GPS-ICD-200." ::= { gps 65 } gpsAlmanacIonotoa OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value, t_oa is the second of the GPS week WN_a of the almanac containing the current set of Ionospheric model coefficients. For more detailed information, consult the GPS-ICD-200." ::= { gps 66 } gpsRTICMode OBJECT-TYPE SYNTAX INTEGER { gpsRTICModeOFF (0), gpsRTICModeON (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the operating mode of the optional Real-Time Ionospheric Correction algorithm, which when On, indicates that the Real-Time Ionospheric Correction delay measurements are enabled to be used in the time transfer calculations to compensate for the GPS signal delay through the ionosphere. When Off, it is not active and the standard GPS broadcast Klobuchar model delay is used in the time transfer calculations." ::= { gps 67 } gpsRTICValid OBJECT-TYPE SYNTAX INTEGER { gpsRTICValidFALSE (0), gpsRTICValidTRUE (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the Validity state of the optional Real-Time Ionospheric Correction algorithm, which when True, indicates that the Real-Time Ionospheric Correction delay measurements are valid and could be used in the time transfer calculations to compensate for the GPS signal delay through the ionosphere. When False, they are not valid and the standard GPS broadcast Klobuchar model delay must be used in the time transfer calculations. A twenty-four hour period of continuous satellite tracking is required before the Real-Time Ionospheric Correction algorithm will set this validity indicator to the True state." ::= { gps 68 } gpsKlobucharEnsembleDelay OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current ensemble ionospheric delay as calculated using the standard GPS broadcast Klobuchar model, in units of nanoseconds, in floating point notation." ::= { gps 69 } gpsRTICEnsembleDelay OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string representing the current ensemble ionospheric delay as calculated using the optional Real-Time Ionospheric Correction algorithm, in units of nanoseconds, in floating point notation. If the Real-Time Ionospheric Correction option is not installed, NOT_INSTALLED is returned." ::= { gps 70 } gpsFaultNibble0Status OBJECT-TYPE SYNTAX BITS { gpsFLASHWriteFlt (0), gpsFPGACfgFlt (1), gpsNoSignalTimeout (2), gpsDACNearLimit (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the least significant nibbles of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: DAC controlling the TCXO is near the high or low limit. Bit 2: Time Figure of Merit has been >= TFOM Fault Level for 1 hour. Bit 1: Field Programmable Gate Array (FPGA) did not configure properly. Bit 0: FLASH memory had a write fault." ::= { gps 71 } gpsFaultNibble1Status OBJECT-TYPE SYNTAX BITS { gpsReceiverFlt (0), gpsNTPNotPolling (1), gpsRefTimeFlt (2), gpsReceiverCommFlt (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the second nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: GPS receiver communication fault. Bit 2: GPS reference time fault (fails sanity checks). Bit 1: NTP daemon is not polling the GPS reference clock. Bit 0: GPS receiver fault." ::= { gps 72 } gpsFaultNibble2Status OBJECT-TYPE SYNTAX BITS { gpsAntennaFlt (0), gpsOscPLLFlt (1), gpsSecPwrSplyFlt (2), gpsPriPwrSplyFlt (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the third nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: Primary Redundant Power Supply is Faulting. Bit 2: Secondary Redundant Power Supply is Faulting. Bit 1: Oscillator PLL Faulting. Bit 0: GPS Antenna or Feedline is Shorted or Open." ::= { gps 73 } gpsFaultNibble3Status OBJECT-TYPE SYNTAX BITS { gpsSysPwrOvld (0), gpsNotUsed1 (1), gpsHP5071a (2), gpsPlugInOpts (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the most significant nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the User's Manual for the fault status field returned by the gpsstat command. Each bit indicates a fault when set. Currently defined fault states encoded in this value: Bit 3: Plug-In Option Fault. Bit 2: HP5071A Cesium Option Fault. Bit 1: Not Used. Bit 0: Installed System Power Exceeds Maximum." ::= { gps 74 } gpsHP5071AOperNibble0Status OBJECT-TYPE SYNTAX BITS { csNotUsed0 (0), csNotUsed1 (1), csNotUsed2 (2), csCalibrating (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the least significant nibble of the optional HP5071A Cesium Operation status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the HP5071A User's Manual for the Operation status register. Each bit indicates a state when set. NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble2Status and gpsHP5071AOperNibble3Status OIDs, that is an indication of an RS-232 communications fault with the HP5071A. Currently defined states encoded in this value: Bit 3: HP5071A is in Calibrating State. Bit 2: Not Used. Bit 1: Not Used. Bit 0: Not Used." ::= { gps 75 } gpsHP5071AOperNibble2Status OBJECT-TYPE SYNTAX BITS { csFatal (0), csNormal (1), csOnBattery (2), csStandby (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the third nibble of the optional HP5071A Cesium Operation status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the HP5071A User's Manual for the Operation status register. Each bit indicates an Operation state when set. NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble0Status and gpsHP5071AOperNible3Status OIDs, that is an indication of an RS-232 communications fault with the HP5071A. Currently defined states encoded in this value: Bit 3: HP5071A is operating in Standby mode. Bit 2: HP5071A is operating on Battery power. Bit 1: HP5071A is operating Normally. Bit 0: HP5071A has a Fatal error." ::= { gps 76 } gpsHP5071AOperNibble3Status OBJECT-TYPE SYNTAX BITS { csNotUsed0 (0), csNotUsed1 (1), csNotUsed2 (2), csSteered (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the most significant nibble of the optional HP5071A Cesium Operation status word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the HP5071A User's Manual for the Operation status register. Each bit indicates an Operation state when set. NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble0Status and gpsHP5071AOperNibble2Status OIDs, that is an indication of an RS-232 communications fault with the HP5071A. Currently defined states encoded in this value: Bit 3: HP5071A is operating with Steered frequency. Bit 2: Not Used. Bit 1: Not Used. Bit 0: Not Used." ::= { gps 77 } gpsHP5071AQuesNibble0Data OBJECT-TYPE SYNTAX BITS { csNotUsed0 (0), csTime (1), csNotUsed2 (2), csNotUsed3 (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the least significant nibble of the optional HP5071A Cesium Questionable Data word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the HP5071A User's Manual for the Questionable status register. Each bit indicates a Questionable state when set. Currently defined states encoded in this value: Bit 3: Not Used. Bit 2: Not Used. Bit 1: HP5071A Time-of-Day Clock has not been set. Bit 0: Not Used." ::= { gps 78 } gpsHP5071AQuesNibble1Data OBJECT-TYPE SYNTAX BITS { csNotUsed0 (0), csPhase (1), csFrequency (2), csNotUsed3 (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a bit string contained in one character representing the second nibble of the optional HP5071A Cesium Questionable Data word. Unfortunately, SNMP numbers the bits in the reverse order, so that the enumerated values are backwards from the description contained in the HP5071A User's Manual for the Questionable status register. Each bit indicates a Questionable state when set. Currently defined states encoded in this value: Bit 3: Not Used. Bit 2: HP5071A Frequency is unlocked. Bit 1: HP5071A Phase has perturbations. Bit 0: Not Used." ::= { gps 79 } gpsHP5071ACsBeamI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium Beam current in uA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 80 } gpsHP5071ACFieldI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium C-Field current in mA, typical range is 10.0 to 14.05 mA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 81 } gpsHP5071AIonPumpI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium Ion Pump current in uA, typical range is 0 to 40 uA. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 82 } gpsHP5071AEMultiplierV OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium Electron-Multiplier voltage, typical range is 1000 to 2553 V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 83 } gpsHP5071ACsOvenV OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium Oven voltage, typical range is 0 to 10V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 84 } gpsHP5071ASignalGainPerCent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium Signal Gain in percent of maximum, typical range is 14.4 to 58 %. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 85 } gpsHP5071ARFAmplitude1PerCent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium microwave RF Amplitude 1 in percent of maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 86 } gpsHP5071ARFAmplitude2PerCent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Cesium microwave RF Amplitude 2 in percent of maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 87 } gpsHP5071AOscillatorOvenV OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Reference Oscillator Oven voltage, typical range is -5 to -10 V. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 88 } gpsHP5071AOscillatorControlPerCent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Reference Oscillator Control in percent of maximum, typical range is -95 to +95 %. It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not installed." ::= { gps 89 } -- gCPUIO branch of the Meridian2 GPS subtree gsysio1PPSWidth OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the status of the Settable PulseWidth, 1PPS Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing the current pulsewidth setting." ::= { gCPUIO 1 } gsysioTimeCodeFormat OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the status of the Selectable Format, Time Code Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing the current time code output format setting." ::= { gCPUIO 2 } gsysioSynthesizerHz OBJECT-TYPE SYNTAX INTEGER (0..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Integer showing the current frequency setting of the 1 Hz resolution, Direct Digital Synthesizer (DDS) Output, system-wide I/O signal. If this option is not installed the value is -1, otherwise the value ranges from 0 to 10000000 Hz." ::= { gCPUIO 3 } gsysioSerialTimeOutputBaudrate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Baudrate of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of 4800, 9600, 19200 or 57600." ::= { gCPUIO 4 } gsysioSerialTimeOutputFormat OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Format of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of SYSPLEX, TRUETIME, NENA0, NENA1, NENA8, ENDRUN, ENDRUNX or NMEA." ::= { gCPUIO 5 } gsysioSerialTimeOutputParity OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the Parity of the Serial Time Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing one of ODD, EVEN or NONE." ::= { gCPUIO 6 } gsysioSerialTimeNMEASentence1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the first NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Meridian2 when the Serial Time Output Format is set to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL, GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE." ::= { gCPUIO 7 } gsysioSerialTimeNMEASentence2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the second NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Meridian2 when the Serial Time Output Format is set to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL, GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE." ::= { gCPUIO 8 } gsysioSerialTimeNMEASentence3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the third NMEA sentence selected for output from the Serial Time Output, system-wide I/O signal. This sentence is only output from the Meridian2 when the Serial Time Output Format is set to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL, GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE." ::= { gCPUIO 9 } gcpuioConnA OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the status of the CPU I/O Connector A. It may be NOT INSTALLED, or a string showing the current I/O selection." ::= { gCPUIO 10 } gcpuioConnB OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the status of the CPU I/O Connector B. It may be NOT INSTALLED, or a string showing the current I/O selection." ::= { gCPUIO 11 } gcpuioConnC OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string showing the status of the CPU I/O Connector C. It may be NOT INSTALLED, or a string showing the current I/O selection." ::= { gCPUIO 12 } -- gPlugInOptions branch of the Meridian2 GPS subtree goptSlot1Desc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and serial number of any detected Plug-In." ::= { goptSlot1 1 } goptSlot1A OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot." ::= { goptSlot1 2 } goptSlot1B OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot." ::= { goptSlot1 3 } goptSlot1C OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot1 4} goptSlot1D OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot." ::= { goptSlot1 5 } goptSlot1E OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot." ::= { goptSlot1 6} goptSlot1F OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot." ::= { goptSlot1 7 } goptSlot2Desc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and serial number of any detected Plug-In." ::= { goptSlot2 1 } goptSlot2A OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot." ::= { goptSlot2 2 } goptSlot2B OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot." ::= { goptSlot2 3 } goptSlot2C OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot2 4} goptSlot2D OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot." ::= { goptSlot2 5 } goptSlot2E OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot." ::= { goptSlot2 6} goptSlot2F OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot." ::= { goptSlot2 7 } goptSlot3Desc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and serial number of any detected Plug-In." ::= { goptSlot3 1 } goptSlot3A OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot." ::= { goptSlot3 2 } goptSlot3B OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot." ::= { goptSlot3 3 } goptSlot3C OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot3 4} goptSlot3D OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot." ::= { goptSlot3 5 } goptSlot3E OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot." ::= { goptSlot3 6} goptSlot3F OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot." ::= { goptSlot3 7 } goptSlot4Desc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and serial number of any detected Plug-In." ::= { goptSlot4 1 } goptSlot4A OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot." ::= { goptSlot4 2 } goptSlot4B OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot4 3 } goptSlot4C OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot4 4} goptSlot4D OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot." ::= { goptSlot4 5 } goptSlot4E OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot." ::= { goptSlot4 6} goptSlot4F OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot." ::= { goptSlot4 7 } goptSlot5Desc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the Plug-In Option that is installed in this slot, or NOT INSTALLED if no Plug-In is detected. It includes the part number and serial number of any detected Plug-In." ::= { goptSlot5 1 } goptSlot5A OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port A on the Plug-In Option in this slot." ::= { goptSlot5 2 } goptSlot5B OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port B on the Plug-In Option in this slot." ::= { goptSlot5 3 } goptSlot5C OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port C on the Plug-In Option in this slot." ::= { goptSlot5 4} goptSlot5D OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port D on the Plug-In Option in this slot." ::= { goptSlot5 5 } goptSlot5E OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port E on the Plug-In Option in this slot." ::= { goptSlot5 6} goptSlot5F OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string that describes the current setting for BNC I/O Port F on the Plug-In Option in this slot." ::= { goptSlot5 7 } -- ptp branch of the Meridian2 GPS subtree gptp0Version OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the Version of the Precise Time Protocol, which is 2." ::= { gptp0 1 } gptp0SyncInterval OBJECT-TYPE SYNTAX INTEGER { msec8 (-7), msec16 (-6), msec31 (-5), msec63 (-4), msec125 (-3), msec250 (-2), msec500 (-1), sec1 (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the log base 2 of the PTP Sync Interval in seconds. Values range from -7 to 0, which covers the range from 1/128 to 1 second." ::= { gptp0 2 } gptp0AnnounceInterval OBJECT-TYPE SYNTAX INTEGER { sec1 (0), sec2 (1), sec4 (2), sec8 (3), sec16 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the log base 2 of the PTP Announce Interval in seconds. Values range from 0 to 4, which covers the range from 1 to 16 seconds." ::= { gptp0 3 } gptp0Priority1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Priority1 parameter. It ranges from 0 to 255." ::= { gptp0 4 } gptp0Priority2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Priority2 parameter. It ranges from 0 to 255." ::= { gptp0 5 } gptp0DelayMechanism OBJECT-TYPE SYNTAX INTEGER { e2e (0), p2p (1), disabled (254) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled." ::= { gptp0 6 } gptp0Domain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Domain parameter. It ranges from 0 to 255." ::= { gptp0 7} gptp0TimeMode OBJECT-TYPE SYNTAX INTEGER { utc (0), ptp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Mode, one of UTC or PTP." ::= { gptp0 8 } gptp0TTL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255." ::= { gptp0 9 } gptp0ClockClass OBJECT-TYPE SYNTAX INTEGER { lockedPTP (6), holdoverPTP (7), lockedARB (13), holdoverARB (14), unlockedPTP (52), unlockedARB (58) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked on either the PTP or arbitrary, i.e. UTC time scale." ::= { gptp0 10 } gptp0TimeScale OBJECT-TYPE SYNTAX INTEGER { arb (0), ptp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Scale, one of ARB or PTP. When operating in other than PTP Time Mode, this value is always ARB, arbitrary." ::= { gptp0 11 } gptp0PortState OBJECT-TYPE SYNTAX INTEGER { init (1), faulty (2), disabled (3), listening (4), preMaster (5), master (6), passive (7), unCalibrated (8), slave (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Port State, one of Initializing, Faulty, Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or Slave." ::= { gptp0 12 } gptp0TimeSource OBJECT-TYPE SYNTAX INTEGER { atom (16), gps (32), radio (48), ptp (64), ntp (80), hand (96), other (144), oscillator (160) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP, NTP, Hand, Other or Oscillator." ::= { gptp0 13 } gptp0UTCOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the UTC offset from Atomic Time in seconds. It is currently 35 seconds." ::= { gptp0 14 } gptp0UTCOffsetValid OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the validity of the UTC offset from Atomic Time in seconds. It is either False or True." ::= { gptp0 15 } gptp0ClockAccuracy OBJECT-TYPE SYNTAX INTEGER { nsec25 (32), nsec100 (33), nsec250 (34), nsec1000 (35), nsec2500 (36), usec10 (37), usec25 (38), usec100 (39), usec250 (40), usec1000 (41), usec2500 (42), msec10 (43), unknown (254) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Clock Accuracy, with values ranging from 25 nanoseconds to Unknown." ::= { gptp0 16 } gptp0Leap59 OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the Leap 59 second indicator, which when True, indicates that a UTC leap second deletion event is imminent. It is either False or True." ::= { gptp0 17 } gptp0Leap61 OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the Leap 61 second indicator, which when True, indicates that a UTC leap second insertion event is imminent. It is either False or True." ::= { gptp0 18 } gptp0TimeTraceable OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the PTP Time Traceable indicator, which when True, indicates that the time of the PTP synchronization messages is traceable to the designated time scale. It is either False or True." ::= { gptp0 19 } gptp0FreqTraceable OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the PTP Frequency Traceable indicator, which when True, indicates that the frequency of the PTP synchronization messages is traceable to the designated time scale. It is either False or True." ::= { gptp0 20 } gptp1Version OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the Version of the Precise Time Protocol, which is 2." ::= { gptp1 1 } gptp1SyncInterval OBJECT-TYPE SYNTAX INTEGER { msec8 (-7), msec16 (-6), msec31 (-5), msec63 (-4), msec125 (-3), msec250 (-2), msec500 (-1), sec1 (0) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the log base 2 of the PTP Sync Interval in seconds. Values range from -7 to 0, which covers the range from 1/128 to 1 second." ::= { gptp1 2 } gptp1AnnounceInterval OBJECT-TYPE SYNTAX INTEGER { sec1 (0), sec2 (1), sec4 (2), sec8 (3), sec16 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the log base 2 of the PTP Announce Interval in seconds. Values range from 0 to 4, which covers the range from 1 to 16 seconds." ::= { gptp1 3 } gptp1Priority1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Priority1 parameter. It ranges from 0 to 255." ::= { gptp1 4 } gptp1Priority2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Priority2 parameter. It ranges from 0 to 255." ::= { gptp1 5 } gptp1DelayMechanism OBJECT-TYPE SYNTAX INTEGER { e2e (0), p2p (1), disabled (254) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled." ::= { gptp1 6 } gptp1Domain OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP Domain parameter. It ranges from 0 to 255." ::= { gptp1 7} gptp1TimeMode OBJECT-TYPE SYNTAX INTEGER { utc (0), ptp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Mode, one of UTC or PTP." ::= { gptp1 8 } gptp1TTL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255." ::= { gptp1 9 } gptp1ClockClass OBJECT-TYPE SYNTAX INTEGER { lockedPTP (6), holdoverPTP (7), lockedARB (13), holdoverARB (14), unlockedPTP (52), unlockedARB (58) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked on either the PTP or arbitrary, i.e. UTC time scale." ::= { gptp1 10 } gptp1TimeScale OBJECT-TYPE SYNTAX INTEGER { arb (0), ptp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Scale, one of ARB or PTP. When operating in other than PTP Time Mode, this value is always ARB, arbitrary." ::= { gptp1 11 } gptp1PortState OBJECT-TYPE SYNTAX INTEGER { init (1), faulty (2), disabled (3), listening (4), preMaster (5), master (6), passive (7), unCalibrated (8), slave (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Port State, one of Initializing, Faulty, Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or Slave." ::= { gptp1 12 } gptp1TimeSource OBJECT-TYPE SYNTAX INTEGER { atom (16), gps (32), radio (48), ptp (64), ntp (80), hand (96), other (144), oscillator (160) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP, NTP, Hand, Other or Oscillator." ::= { gptp1 13 } gptp1UTCOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This value is the UTC offset from Atomic Time in seconds. It is currently 35 seconds." ::= { gptp1 14 } gptp1UTCOffsetValid OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the validity of the UTC offset from Atomic Time in seconds. It is either False or True." ::= { gptp1 15 } gptp1ClockAccuracy OBJECT-TYPE SYNTAX INTEGER { nsec25 (32), nsec100 (33), nsec250 (34), nsec1000 (35), nsec2500 (36), usec10 (37), usec25 (38), usec100 (39), usec250 (40), usec1000 (41), usec2500 (42), msec10 (43), unknown (254) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the PTP Clock Accuracy, with values ranging from 25 nanoseconds to Unknown." ::= { gptp1 16 } gptp1Leap59 OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the Leap 59 second indicator, which when True, indicates that a UTC leap second deletion event is imminent. It is either False or True." ::= { gptp1 17 } gptp1Leap61 OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the Leap 61 second indicator, which when True, indicates that a UTC leap second insertion event is imminent. It is either False or True." ::= { gptp1 18 } gptp1TimeTraceable OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the PTP Time Traceable indicator, which when True, indicates that the time of the PTP synchronization messages is traceable to the designated time scale. It is either False or True." ::= { gptp1 19 } gptp1FreqTraceable OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value maps to the state of the PTP Frequency Traceable indicator, which when True, indicates that the frequency of the PTP synchronization messages is traceable to the designated time scale. It is either False or True." ::= { gptp1 20 } END