CTRON-PRIORITY-CLASSIFY-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- ct-priority-classify-mib.txt -- Revision: 01.00.02 -- Part Number: -- Date: "200203121855Z" Tue Mar 12 18:55 GMT 2002 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@cabletron.com -- -- This module provides authoritative definitions for Cabletron's -- enterprise-specific Priority classification MIB. -- -- This module will be extended, as required. -- -- ------------------------------------------------------------- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- -- Copyright 1999-2002 Cabletron Systems -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- PortList -- FROM Q-BRIDGE-MIB ctPriorityExt FROM CTRON-MIB-NAMES; ctPriClassify MODULE-IDENTITY LAST-UPDATED "200203121855Z" -- Tue Mar 12 18:55 GMT 2002 ORGANIZATION "Cabletron Systems, Inc" CONTACT-INFO " Cabletron Systems, Inc. Postal: 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 Phone: (603) 332-9400 Email: support@cabletron.com Web: http://www.cabletron.com" DESCRIPTION "The Cabletron Priority Classify MIB module for controlling Cabletron specific priority classification criteria based on packet content." ::= { ctPriorityExt 6 } ctPriClassifyObjects OBJECT IDENTIFIER ::= { ctPriClassify 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- CtPriClassifyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each enumerated value represents a unique classification type. Different types have different rules regarding how data is interpreted during classification. These rules are spelled out in the comments preceding each type." SYNTAX INTEGER { -- ----------------------------------------------------- -- DESCRIPTION: The EtherType field which is present -- in Ethernet II type packets. -- LIMITATIONS: -- DataVal: INTEGER(1526..65535) -- DataMask: Mask not used (0) -- ----------------------------------------------------- etherType(1), -- ----------------------------------------------------- -- DESCRIPTION: The DSAP/SSAP pair present in 802.3 -- framed packets -- LIMITATIONS: -- DataVal: INTEGER(0..65535) further limitations -- may exist on an implementation by -- implementation basis (DSAP must equal -- SSAP for example) -- DataMask: Mask not used (0) -- ----------------------------------------------------- llcDsapSsap(2), -- ----------------------------------------------------- -- DESCRIPTION: The Type of Service field present in IP -- packets (3 bits of precedence, plus -- bits for delay, throughput, and reli- -- ability) -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipTypeOfService(3), -- ----------------------------------------------------- -- DESCRIPTION: The IP Protocol field (ref. RFC 1700) -- examples include (TCP,UDP,ICMP,etc) -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipProtocolType(4), -- ----------------------------------------------------- -- DESCRIPTION: Transmission control used by IPX -- routers, set to zero before network -- transmision. -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipxClassOfService(5), -- ----------------------------------------------------- -- DESCRIPTION: IPX packet type, administered by Novell -- 0 ...... Hello or SAP -- 1 ...... RIP -- 2 ...... Echo Packet -- 3 ...... Error Packet -- 4 ...... Netware 386 or SAP -- 5 ...... Sequenced Packet Protocol -- 17 ..... Netware 286 -- 16-31 .. Experimental protocols -- LIMITATIONS: -- DataVal: INTEGER(0..31) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipxPacketType(6), -- ----------------------------------------------------- -- DESCRIPTION: This group represents IP addresses -- which are present in packets using -- the IP protocol. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address. Additional entries fail. -- -- DataVal: Each octet of an IP address uses one -- octet of this Unsigned32 value starting -- with the most significant octet (e.g., -- an IP address of 170.187.204.221 is -- represented by a value of 0xaabbccdd. -- -- DataMask: Follows the same form as DataVal -- (e.g., 255.255.240.0 is 0x00000fff) -- Remember that DataMask is one's -- complement. Also, starting with the -- most significant bit, only one "0 to 1" -- transition may occur. (e.g., 0x000fefff -- is not valid. -- ----------------------------------------------------- ipAddressSource(7), -- Source IP address only. ipAddressDestination(8), -- Destination IP address only. ipAddressBilateral(9), -- Both Source and Dest IP. -- ----------------------------------------------------- -- DESCRIPTION: The network number assigned to this -- IPX network (zero is the local network) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same Network Number unique -- only one entry from this group may -- exist for a given Network Number -- Additional entries fail. -- -- DataVal: INTEGER -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipxNetworkSource(10), ipxNetworkDestination(11), ipxNetworkBilateral(12), -- ----------------------------------------------------- -- DESCRIPTION: Describes a UDP/IP port(socket). These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same port unique, only one -- entry from this group may exist for a -- given port. Additional entries fail. -- -- DataVal: INTEGER(0..65535) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipUdpPortSource(13), ipUdpPortDestination(14), ipUdpPortBilateral(15), -- ----------------------------------------------------- -- DESCRIPTION: Describes a TCP/IP port(socket). These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same port unique, only one -- entry from this group may exist for a -- given port. Additional entries fail. -- -- DataVal: INTEGER(0..65535) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipTcpPortSource(16), ipTcpPortDestination(17), ipTcpPortBilateral(18), -- ----------------------------------------------------- -- DESCRIPTION: Describes a IPX socket. These -- values are used by higher protocols -- to target specific applications among -- hosts -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same port unique, only one -- entry from this group may exist for a -- given port. Additional entries fail. -- -- DataVal: INTEGER(0..65535) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipxSocketSource(19), ipxSocketDestination(20), ipxSocketBilateral(21), -- ----------------------------------------------------- -- DESCRIPTION: Describes a MAC address. These -- values uniquely describe nodes on a -- OSI Layer 2 network. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same MAC address unique, only -- one entry from this group may exist for -- a given port. Additional entries fail. -- -- DataVal: INTEGER holding the first 4 bytes of -- the 6 byte MAC address. -- DataMask: INTEGER holding the last 2 bytes of -- the 6 byte MAC address in the 2 most -- significant bytes of the INTEGER, the -- two least significant bytes must be -- zero. -- Example: MAC address is 00-12-34-56-78-9A, -- DataVal is 00123456 -- DataMask is 789A0000 -- ----------------------------------------------------- macAddressSource(22), macAddressDestination(23), macAddressBilateral(24), -- ----------------------------------------------------- -- DESCRIPTION: Describes IP Fragments. IP frames -- which exceed the MTU of the media on -- which they travel may be fragmented -- into smaller packets. These packets -- no longer contain the UDP/TCP port -- numbers, although they do still -- contain the IP addresses from the -- original frame. -- -- LIMITATIONS: -- DataVal: Val not used (0) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipFragments(25) } -- ------------------------------------------------------------- -- The PortList TEXTUAL-CONVENTION is from the Q-BRIDGE-MIB -- as defined in draft-ietf-bridge-bridgemib-05.txt. -- When Q-BRIDGE-MIB is officially adopted, this definition -- should be removed and added to IMPORTS above. That of course -- assumes that these definitions do not change in a manner such -- that they are incompatible with the existing definitions. -- ------------------------------------------------------------- PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING -- ------------------------------------------------------------- -- Priority Classification Group -- ------------------------------------------------------------- ctPriClassifyStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Priority Classification feature to be globally enabled/disabled. A value of disable(2), functionally supersedes the RowStatus of individual entries in the ctPriClassifyTable, but does not change their actual RowStatus value." DEFVAL { disable } ::= { ctPriClassifyObjects 1} ctPriClassifyMaxEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries allowed in the ctPriClassifyTable." ::= { ctPriClassifyObjects 2} ctPriClassifyNumEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of entries in the ctPriClassifyTable." ::= { ctPriClassifyObjects 3} -- ------------------------------------------------------------- -- Priority Classification Table -- ------------------------------------------------------------- ctPriClassifyTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPriClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing configuration information for each Priority classification configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { ctPriClassifyObjects 4 } ctPriClassifyEntry OBJECT-TYPE SYNTAX CtPriClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a particular entry of ctPriClassifyTable." INDEX { ctPriClassifyPriority, ctPriClassifyDataMeaning, ctPriClassifyDataVal, ctPriClassifyDataMask } ::= { ctPriClassifyTable 1 } CtPriClassifyEntry ::= SEQUENCE { ctPriClassifyPriority INTEGER, ctPriClassifyDataMeaning CtPriClassifyType, ctPriClassifyDataVal Unsigned32, ctPriClassifyDataMask Unsigned32, ctPriClassifyIngressList PortList, ctPriClassifyRowStatus RowStatus, ctPriClassifyRowInfo DisplayString, ctPriClassifyTOSStatus INTEGER, ctPriClassifyTOSValue INTEGER } ctPriClassifyPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority for this entry. Any packet meeting the classification criteria specified by this conceptual row will be given the priority indicated by this object." ::= { ctPriClassifyEntry 1 } ctPriClassifyDataMeaning OBJECT-TYPE SYNTAX CtPriClassifyType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The meaning of the ctPriClassifyDataVal leaf for this conceptual row. The ctPriClassifyDataVal specifies a particular value which, when compared to packet data, is used to classify that packet to a particular priority. The part of the packet (if any), to which this data comparison applies, is determined by this object. For example, the value ipAddressBilateral(8) means that the value ctPriClassifyDataVal for this entry is an IP address. It further means that the given IP address will be compared against both source and destination IP address fields in a packet. Such an entry obviously would not not match against any non-IP packets. Additionally, the value of this leaf will impose certain implicit ranges and interpretations of data contained within the ctPriClassifyDataVal leaf for this entry. The specific limitations of each type should be spelled out in the comments for that type." ::= { ctPriClassifyEntry 2 } ctPriClassifyDataVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The data value associated with ctPriClassifyDataMeaning. The explicit range of this value is any unsigned 32-bit integer(0..4294967295). This range may vary, however, depending upon the value of ctPriClassifyDataMeaning. Illegal values should not be allowed." ::= { ctPriClassifyEntry 3 } ctPriClassifyDataMask OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the one's complement of a 32-bit mask. This mask is applicable to the data comparison of ctPriClassifyDataVal. The mask is applied to the actual packet data under consideration through a logical bitwise AND operation. This result is then compared to the data. For example, we want to classify according to a bilateral IP address of 134.141.0.0 with a mask of 255.255.240.0. This would be reflected by the following values: ctPriClassifyDataMeaning: ipAddressBilateral(8) ctPriClassifyDataVal: 0x868d0000 ctPriClassifyDataMask: 0x00000fff Again there are contextual implications for this leaf depending upon the value of ctPriClassifyDataMeaning. Not all types will use the mask, and others will impose restrictions. This value should however be a true indication of the masking operation. In other words, data types that don't use a mask should only allow a value of zero, indicating that all data bits are significant in the comparison. The specific restrictions of each type should be spelled out in the comments for that type. Illegal values should not be allowed." ::= { ctPriClassifyEntry 4 } ctPriClassifyIngressList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports on which this classification rule applies. Classification occurs on ingress. An agent implementation should allow a set operation of this object to create a row if it does not exist." DEFVAL { '0000'H } ::= { ctPriClassifyEntry 5 } ctPriClassifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides both control and status for the associated conceptual row in the table. Rows can be created in two ways. createAndGo - The specified row will be created and activated if the instance is allowable. If not, an inconsistentValue exception will be returned and the row will not be created. This provides the most optimal method of creating an active row, but provides the user no explanation if the row cannot be created. createAndWait - The specified row will be created and put in the notInService state if the instance is allowable. A subsequent activation of this row will bring it into the active state. If the instance is not allowable, the row will be created and put in the notReady state. A subsequent activation of this row will fail. Since the inappropriate information is always contained in the indexing leaves, activation will never succeed and the row should be removed by the management station. When a row is in the notReady state, the ctPriClassifyRowInfo may be retrieved to obtain a plain English explanation of why this row cannot be activated. createAndWait is the preferred method for this reason. Both methods described above leave ctPriClassifyIngressList in it's default state, requiring an additional set operation in order to modify it. An even more optimal twist on the createAndWait method is to set the ctPriClassifyIngressList to it's desired value as a method for row creation. This will essentially cause an implicit createAndWait since it too will leave the row in either the notInService or notReady state. This leaves only activation or error analysis as the last step. Any rows left in the notReady or notInService state for more than 5 minutes should be automatically removed by the agent implementation." ::= { ctPriClassifyEntry 6 } ctPriClassifyRowInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides info about this row in the form of an ASCII string, suitable for display purposes. The intended purpose of this object is to provide an 'agent-specific' explanation as to why the ctPriClassifyRowStatus for this conceptual row is in the 'notReady' state. A management station should read this object and display it to the user in this case. A conceptual row that does not fall into this category may simply return a single NULL, but may also provide any useful info of its choice. A management station may attempt to display such info if it so chooses, but is under no burden to do so." ::= { ctPriClassifyEntry 7 } ctPriClassifyTOSStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether an IP Type Of Service (TOS) value, defined by ctPriClassifyTOSValue, should be written into the TOS field of the IP header for any packet matching the classification specified by this conceptual row. This object may be set to enable only for the conceptual rows whose ctPriClassifyDataMeaning and ctPriClassifyDataVal have the following values: ctPriClassifyDataMeaning ctPriClassifyDataVal ------------------------ -------------------- etherType(1) 0x0800 (IP) llcDsapSsap(2) 0x0606 (IP) ipTypeOfService(3) any ipProtocolType(4) any ipAddressSource(7) any ipAddressDestination(8) any ipAddressBilateral(9) any ipUdpPortSource(13) any ipUdpPortDestination(14) any ipUdpPortBilateral(15) any ipTdpPortSource(16) any ipTdpPortDestination(17) any ipTdpPortBilateral(18) any ipFrag(25) not applicable A conceptual row that does not fall into these categories may be set to disable(2) and will return disable(2)." ::= { ctPriClassifyEntry 8 } ctPriClassifyTOSValue OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to be written into the IP TOS field of the IP header of any packet that matches the classification specified by the conceptual row." ::= { ctPriClassifyEntry 9 } -- ------------------------------------------------------------- -- Supported Ability Table -- ------------------------------------------------------------- ctPriClassifyAbilityTable OBJECT-TYPE SYNTAX SEQUENCE OF CtPriClassifyAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information for each of the priority classification types. Types for which there is no corresponding row are not supported by this device." ::= { ctPriClassifyObjects 5 } ctPriClassifyAbilityEntry OBJECT-TYPE SYNTAX CtPriClassifyAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a particular entry of ctPriClassifyAbilityTable." INDEX { ctPriClassifyAbility } ::= { ctPriClassifyAbilityTable 1 } CtPriClassifyAbilityEntry ::= SEQUENCE { ctPriClassifyAbility CtPriClassifyType, ctPriClassifyPorts PortList } ctPriClassifyAbility OBJECT-TYPE SYNTAX CtPriClassifyType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority classification type associated with this entry." ::= { ctPriClassifyAbilityEntry 1 } ctPriClassifyPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports on which the classification type specified by ctPriClassifyAbility is supported." ::= { ctPriClassifyAbilityEntry 2 } ctPriClassifyTableLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the sysUpTime at which the last change was made to the ctPriClassifyTable." ::= { ctPriClassifyObjects 6} -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- ctPriClassifyConformance OBJECT IDENTIFIER ::= { ctPriClassify 2 } ctPriClassifyGroups OBJECT IDENTIFIER ::= { ctPriClassifyConformance 1 } ctPriClassifyCompliances OBJECT IDENTIFIER ::= { ctPriClassifyConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- ctPriClassifyBaseGroup OBJECT-GROUP OBJECTS { ctPriClassifyStatus, ctPriClassifyMaxEntries, ctPriClassifyNumEntries, ctPriClassifyIngressList, ctPriClassifyRowStatus, ctPriClassifyRowInfo, ctPriClassifyTOSStatus, ctPriClassifyTOSValue, ctPriClassifyPorts, ctPriClassifyTableLastChange } STATUS current DESCRIPTION "A collection of objects providing device level control and status information for Priority classification." ::= { ctPriClassifyGroups 1 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- ctPriClassifyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support Priority classification." MODULE MANDATORY-GROUPS { ctPriClassifyBaseGroup } ::= { ctPriClassifyCompliances 1 } END