CTRON-SFPS-SFLSP-MIB DEFINITIONS ::= BEGIN -- sfps-sflsp-mib.txt -- Revision: 0.0.06 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- -- This module provides authoritative definitions for Cabletron's -- enterprise specific Fast Packet Switching Services API MIB. -- -- This module will be extended, as required. -- -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 93 Cabletron Systems -- IMPORTS OBJECT-TYPE FROM RFC-1212 -- DisplayString -- FROM RFC1213-MIB -- enterprises, TimeTicks, IpAddress, Counter, Gauge FROM RFC1155-SMI -- These Objects are defined in the file sfps-inc.mib.txt.0.0.1 vlanSflspGeneralVariables, vlanSflspLsdb, vlanSflspInterfaces, vlanSflspIfMetric, vlanSflspNeighbors, vlanSflspArea, vlanSflsp1stHop, vlanSflspTracePathAPI, vlanSflspTracePathInternal, vlanSflspLSDBFlood, vlanSflspLSPStats FROM CTRON-SFPS-INCLUDE-MIB; SfpsAddress ::= OCTET STRING (SIZE (6)) -- this will map to a MAC address -- SFLSP vlanSflspGeneralSwitchID OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying the switch in the Switch Fabric. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to zeroes." ::= { vlanSflspGeneralVariables 1 } vlanSflspGeneralAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of the SFLSP in the switch. The value 'enabled' denotes that the SFLSP Process is active on at least one interface; 'disabled' disables it on all interfaces. " ::= { vlanSflspGeneralVariables 2 } vlanSflspGeneralVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current version number of the SFLSP protocol is 2 " ::= { vlanSflspGeneralVariables 3 } vlanSflspGeneralAreaBRStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether this switch is an area border switch " ::= { vlanSflspGeneralVariables 4 } vlanSflspGeneralASBRStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether this switch is an Autonomous System border switch. " ::= { vlanSflspGeneralVariables 5 } vlanSflspGeneralTOSSupport OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The switch's support for type-of-service switching. Currently, this is set to false, indicating no type-of-service switching." ::= { vlanSflspGeneralVariables 6 } vlanSflspGeneralOrgNewLSAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of new link-state advertisements that have been originated. This number is incremented each time the switch originates a new LSA." ::= { vlanSflspGeneralVariables 7 } vlanSflspGeneralRcvNewLSAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of link-state advertisements received determined to be new. instantiations. This number does not include newer instantiations of self-originated link-state advertisements." ::= { vlanSflspGeneralVariables 8 } vlanSflspGeneralMaxOnQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of events on the queue" ::= { vlanSflspGeneralVariables 9 } vlanSflspGeneralCurOnQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current number of events on the queue" ::= { vlanSflspGeneralVariables 10 } vlanSflspGeneralMaxTimeUs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum length of time to process events on the queue" ::= { vlanSflspGeneralVariables 11 } vlanSflspGeneralCurTimeUs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current length of time to process events on the queue" ::= { vlanSflspGeneralVariables 12 } vlanSflspGeneralMaxEvents OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of events processed at once" ::= { vlanSflspGeneralVariables 13 } vlanSflspGeneralMaxTimeOccurred OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Maximum length of time occurred at this time" ::= { vlanSflspGeneralVariables 14 } vlanSflspGeneralMaxOnQOccurred OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of events on the queue occurred at this time" ::= { vlanSflspGeneralVariables 15 } vlanSflspGeneralTotalSwLinks OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total number of switch links in our database" ::= { vlanSflspGeneralVariables 16 } vlanSflspGeneralLastChangeDet OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Timestamp of last run of spf due to change detected in topology " ::= { vlanSflspGeneralVariables 17 } vlanSflspGeneralFloodMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspGeneralVariables 18 } vlanSflspGeneralLowestMac OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspGeneralVariables 19 } vlanSflspGeneralRootId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspGeneralVariables 20 } vlanSflspGeneralFloodAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vlanSflspGeneralVariables 21 } --LSDB vlanSflspLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SFLSP Process's Links State Database. " ::= { vlanSflspLsdb 1 } vlanSflspLsdbEntry OBJECT-TYPE SYNTAX VlanSflspLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A single Link State Advertisement" INDEX { vlanSflspLsdbAreaID, vlanSflspLsdbType, vlanSflspLsdbLSID, vlanSflspLsdbSwitchID } ::= { vlanSflspLsdbTable 1 } VlanSflspLsdbEntry ::= SEQUENCE { vlanSflspLsdbAreaID INTEGER, vlanSflspLsdbType INTEGER, vlanSflspLsdbLSID OCTET STRING, vlanSflspLsdbSwitchID OCTET STRING, vlanSflspLsdbSequence INTEGER, vlanSflspLsdbAge INTEGER, vlanSflspLsdbChecksum INTEGER, vlanSflspLsdbAdvertisement OCTET STRING, vlanSflspLsdbUsedInSPF INTEGER } vlanSflspLsdbAreaID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit identifier of the Area from which the LSA was received. " ::= { vlanSflspLsdbEntry 1 } vlanSflspLsdbType OBJECT-TYPE SYNTAX INTEGER { switch-link(1), connection-link(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the link state advertisement. Each link state type has a seperate advertisement format. " ::= { vlanSflspLsdbEntry 2 } vlanSflspLsdbLSID OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The Link State ID is an LS Type Specific field containing either a switch ID or a switch port name; it identifies the piece of the routing domain that is being described by the advertisement. " ::= { vlanSflspLsdbEntry 3 } vlanSflspLsdbSwitchID OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying the orignating switch in the Switch Fabric. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to zeroes." ::= { vlanSflspLsdbEntry 4 } vlanSflspLsdbSequence OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence numbers the more recent the advertisement. " ::= { vlanSflspLsdbEntry 5 } vlanSflspLsdbAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the age of the link state advertisement in seconds ." ::= { vlanSflspLsdbEntry 6 } vlanSflspLsdbChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating th checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. " ::= { vlanSflspLsdbEntry 7 } vlanSflspLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The entire Link State Advertisement, including its header. " ::= { vlanSflspLsdbEntry 8 } vlanSflspLsdbUsedInSPF OBJECT-TYPE SYNTAX INTEGER { -- false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { vlanSflspLsdbEntry 9 } -- interfaces vlanSflspInterfacesTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspInterfacesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SFLSP Interface Table describes the interfaces from the viewpoint of SFLSP. " ::= { vlanSflspInterfaces 1 } vlanSflspInterfacesEntry OBJECT-TYPE SYNTAX VlanSflspInterfacesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SFLSP Interfaces Entry describes one interface from the viewpoint of SFLSP " INDEX { vlanSflspInterfacesIFAddress, vlanSflspInterfacesSwAddressLess } ::= { vlanSflspInterfacesTable 1 } VlanSflspInterfacesEntry ::= SEQUENCE { vlanSflspInterfacesIFAddress SfpsAddress, vlanSflspInterfacesSwAddressLess INTEGER, vlanSflspInterfacesAreaID IpAddress, vlanSflspInterfacesIfType INTEGER, vlanSflspInterfacesAdminStatus INTEGER, vlanSflspInterfacesSwPriority INTEGER, vlanSflspInterfacesTransDelay INTEGER, vlanSflspInterfacesReTransInterval INTEGER, vlanSflspInterfacesHelloInterval INTEGER, vlanSflspInterfacesDeadInterval INTEGER, vlanSflspInterfacesPollInterval INTEGER, vlanSflspInterfacesState INTEGER, vlanSflspInterfacesDS SfpsAddress, vlanSflspInterfacesBDS SfpsAddress, vlanSflspInterfacesEvents Counter, vlanSflspInterfacesAuthKey SfpsAddress } vlanSflspInterfacesIFAddress OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying the port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the interface." ::= { vlanSflspInterfacesEntry 1 } vlanSflspInterfacesSwAddressLess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address. " ::= { vlanSflspInterfacesEntry 2 } vlanSflspInterfacesAreaID OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the SFLSP backbone. " ::= { vlanSflspInterfacesEntry 3 } vlanSflspInterfacesIfType OBJECT-TYPE SYNTAX INTEGER { brodcast(1), nbma(2), point-to-point(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The SFLSP interface type. Currently all interfaces are handled as broadcast type. " ::= { vlanSflspInterfacesEntry 4 } vlanSflspInterfacesAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The SFLSP interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to SFLSP. " ::= { vlanSflspInterfacesEntry 5 } vlanSflspInterfacesSwPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used in the designated switch election algorithm. By default all switches are eligible with a priority of 1. " ::= { vlanSflspInterfacesEntry 6 } vlanSflspInterfacesTransDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link-state update packet over this interface. " ::= { vlanSflspInterfacesEntry 7 } vlanSflspInterfacesReTransInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when re- transmitting database description and link-state request packets. " ::= { vlanSflspInterfacesEntry 8 } vlanSflspInterfacesHelloInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The lenght of time, in seconds, between the Hello packets that the switch sends on the interface. This value must be the same for all switches attached to a common network. " ::= { vlanSflspInterfacesEntry 9 } vlanSflspInterfacesDeadInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a switch's Hello packets have not been seen before it's neighbors declare the switch down. This should be some multiple of the Hello interval. This value must be the same for all switches attached to a common network. " ::= { vlanSflspInterfacesEntry 10 } vlanSflspInterfacesPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. " ::= { vlanSflspInterfacesEntry 11 } vlanSflspInterfacesState OBJECT-TYPE SYNTAX INTEGER { down(1), loopback(2), waiting(3), point-to-point(4), dr(5), bdr(6), dr-other(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The SFLSP Interface State. " ::= { vlanSflspInterfacesEntry 12 } vlanSflspInterfacesDS OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "An octet string uniquely identifying the designated switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address." ::= { vlanSflspInterfacesEntry 13 } vlanSflspInterfacesBDS OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "An octet string uniquely identifying the backup designated switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address." ::= { vlanSflspInterfacesEntry 14 } vlanSflspInterfacesEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this SFLSP interface has changed its state, or an error has occured. " ::= { vlanSflspInterfacesEntry 15 } vlanSflspInterfacesAuthKey OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-write STATUS mandatory DESCRIPTION "THe Authentification Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. " ::= { vlanSflspInterfacesEntry 16 } -- IfMetric vlanSflspIfMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The TOS metrics for a non-virtual interface indentified by the interface index." ::= { vlanSflspIfMetric 1 } vlanSflspIfMetricEntry OBJECT-TYPE SYNTAX VlanSflspIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A particular TOS metric for a non-virtual interface identified by the interface index." INDEX { vlanSflspIfMetricIfAddress, vlanSflspIfMetricIfTOSType } ::= { vlanSflspIfMetricTable 1 } VlanSflspIfMetricEntry ::= SEQUENCE { vlanSflspIfMetricIfAddress OCTET STRING, vlanSflspIfMetricIfTOSType INTEGER, vlanSflspIfMetricIfMetric INTEGER, vlanSflspIfMetricIfStatus INTEGER } vlanSflspIfMetricIfAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying the port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the interface." ::= { vlanSflspIfMetricEntry 1 } vlanSflspIfMetricIfTOSType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The type of service metric being referenced. On row creation, this can be derived from the instance.." ::= { vlanSflspIfMetricEntry 2 } vlanSflspIfMetricIfMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'. " ::= { vlanSflspIfMetricEntry 3 } vlanSflspIfMetricIfStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent " ::= { vlanSflspIfMetricEntry 4 } -- Neighbors vlanSflspNeighborsTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspNeighborsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of non-virtual neighbor information ." ::= { vlanSflspNeighbors 1 } vlanSflspNeighborsEntry OBJECT-TYPE SYNTAX VlanSflspNeighborsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single neighbor. " INDEX { vlanSflspNeighborsPortName } ::= { vlanSflspNeighborsTable 1 } VlanSflspNeighborsEntry ::= SEQUENCE { vlanSflspNeighborsPortName OCTET STRING, vlanSflspNeighborsSwitchID OCTET STRING, vlanSflspNeighborsOptions INTEGER, vlanSflspNeighborsPriority INTEGER, vlanSflspNeighborsState INTEGER, vlanSflspNeighborsEvents Counter, vlanSflspNeighborsLSRetransQLen Gauge, vlanSflspNeighborsHELLOsRcvd INTEGER, vlanSflspNeighborsDBDsRcvd INTEGER, vlanSflspNeighborsLSUsRcvd INTEGER, vlanSflspNeighborsLSRsRcvd INTEGER, vlanSflspNeighborsLSACKsRcvd INTEGER, vlanSflspNeighborsHELLOsSent INTEGER, vlanSflspNeighborsDBDsSent INTEGER, vlanSflspNeighborsLSUsSent INTEGER, vlanSflspNeighborsLSRsSent INTEGER, vlanSflspNeighborsLSACKsSent INTEGER, vlanSflspNeighborsNBMAStatus INTEGER, vlanSflspNeighborsFULLTimeSec TimeTicks } vlanSflspNeighborsPortName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying the neighbor's port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the neighbor's interface." ::= { vlanSflspNeighborsEntry 1 } vlanSflspNeighborsSwitchID OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "An octet string uniquely identifying the neighboring switch in the Switch Fabric. By convention, to ensure uniqueness this should default to the base mac address." ::= { vlanSflspNeighborsEntry 2 } vlanSflspNeighborsOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric ." ::= { vlanSflspNeighborsEntry 3 } vlanSflspNeighborsPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The priority of this neighbor in the designated switch election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated switch on this particular network." ::= { vlanSflspNeighborsEntry 4 } vlanSflspNeighborsState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), two-way(4), exchange(5), exchange-start(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION " The State of the relationship with this Neighbor." ::= { vlanSflspNeighborsEntry 5 } vlanSflspNeighborsEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this neighbor relationship has changed state, or an error has occurred. " ::= { vlanSflspNeighborsEntry 6 } vlanSflspNeighborsLSRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " The current length of the retransmission queue." ::= { vlanSflspNeighborsEntry 7 } vlanSflspNeighborsHELLOsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hello packets received from this neighbor" ::= { vlanSflspNeighborsEntry 8 } vlanSflspNeighborsDBDsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of database description packets received from this neighbor" ::= { vlanSflspNeighborsEntry 9 } vlanSflspNeighborsLSUsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state update packets received from this neighbor" ::= { vlanSflspNeighborsEntry 10 } vlanSflspNeighborsLSRsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state request packets received from this neighbor" ::= { vlanSflspNeighborsEntry 11 } vlanSflspNeighborsLSACKsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state acknowledgement packets received from this neighbor" ::= { vlanSflspNeighborsEntry 12 } vlanSflspNeighborsHELLOsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hello packets sent to this neighbor" ::= { vlanSflspNeighborsEntry 13 } vlanSflspNeighborsDBDsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of database description packets sent to this neighbor" ::= { vlanSflspNeighborsEntry 14 } vlanSflspNeighborsLSUsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state update packets sent to this neighbor" ::= { vlanSflspNeighborsEntry 15 } vlanSflspNeighborsLSRsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state request packets sent to this neighbor" ::= { vlanSflspNeighborsEntry 16 } vlanSflspNeighborsLSACKsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of link state acknowledgement packets sent to this neighbor" ::= { vlanSflspNeighborsEntry 17 } vlanSflspNeighborsNBMAStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-only STATUS mandatory DESCRIPTION " The variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependant." ::= { vlanSflspNeighborsEntry 18 } vlanSflspNeighborsFULLTimeSec OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Neighbor went to FULL state at this time " ::= { vlanSflspNeighborsEntry 19 } -- Area vlanSflspAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parameters and cumulative statistics of the switches attached areas." ::= { vlanSflspArea 1 } vlanSflspAreaEntry OBJECT-TYPE SYNTAX VlanSflspAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parameters and cumulative statistics of one of the switches attached areas." INDEX { vlanSflspAreaAreaID } ::= { vlanSflspAreaTable 1 } VlanSflspAreaEntry ::= SEQUENCE { vlanSflspAreaAreaID IpAddress, vlanSflspAreaAuthType INTEGER, vlanSflspAreaSPFRuns Counter, vlanSflspAreaABRCount Gauge, vlanSflspAreaASBRCount Gauge, vlanSflspAreaAreaLSACnt Gauge, vlanSflspAreaAreaCheckSum INTEGER, vlanSflspAreaLastSpfRun TimeTicks } vlanSflspAreaAreaID OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 10 byte octet string uniquely identifying an area." ::= { vlanSflspAreaEntry 1 } vlanSflspAreaAuthType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis." ::= { vlanSflspAreaEntry 2 } vlanSflspAreaSPFRuns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm." ::= { vlanSflspAreaEntry 3 } vlanSflspAreaABRCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of area border switches reachable within this area. This is initially zero, and is calculated in each SPF Pass." ::= { vlanSflspAreaEntry 4 } vlanSflspAreaASBRCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Autonomous System border switches reachable within this area. This is initially zero, and is calculated in each LSP Pass." ::= { vlanSflspAreaEntry 5 } vlanSflspAreaAreaLSACnt OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's" ::= { vlanSflspAreaEntry 6 } vlanSflspAreaAreaCheckSum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a switches link state database, and to compare the link-state database of two switches." ::= { vlanSflspAreaEntry 7 } vlanSflspAreaLastSpfRun OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp of last run of spf" ::= { vlanSflspAreaEntry 8 } -- 1stHop vlanSflsp1stHopTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflsp1stHopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the SecureFast path next-hop table. It reports various information about the next switch port address on the path to a particular destination switch port address." ::= { vlanSflsp1stHop 1 } vlanSflsp1stHopEntry OBJECT-TYPE SYNTAX VlanSflsp1stHopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry describes the next hop switch port addresses for each destination switch port address." INDEX { vlanSflsp1stHopDestSwitch } ::= { vlanSflsp1stHopTable 1 } VlanSflsp1stHopEntry ::= SEQUENCE { vlanSflsp1stHopDestSwitch OCTET STRING, vlanSflsp1stHopPath11stHop OCTET STRING, vlanSflsp1stHopPath21stHop OCTET STRING, vlanSflsp1stHopPath31stHop OCTET STRING } vlanSflsp1stHopDestSwitch OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the index to the table, representing destination switch port addresses for each port address within the switch fabric." ::= { vlanSflsp1stHopEntry 1 } vlanSflsp1stHopPath11stHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The 1st hop of the 1st path to the destination switch" ::= { vlanSflsp1stHopEntry 2 } vlanSflsp1stHopPath21stHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The 1st host of the 2nd path to the destination switch" ::= { vlanSflsp1stHopEntry 3 } vlanSflsp1stHopPath31stHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The 1st hop of the 3rd path to the destination switch" ::= { vlanSflsp1stHopEntry 4 } -- Trace Path vlanSflspTracePathAPIDest OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This is the switch address for which a path list will be requested in the sfTracePathTable." ::= { vlanSflspTracePathAPI 1 } vlanSflspTracePathAPIID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is an ID to uniquely identify the path list request in the sfTracePathTable." ::= { vlanSflspTracePathAPI 2 } vlanSflspTracePathAPIType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative control of the trace path request entry in the sfTracePathTable. It is used to create or delete a trace path request entry." ::= { vlanSflspTracePathAPI 3 } vlanSflspTracePathAPIAction OBJECT-TYPE SYNTAX INTEGER { other(1), activate(2), suspend(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to be performed by the trace path request entry in the sfTracePathTable." ::= { vlanSflspTracePathAPI 4 } -- Trace Path vlanSflspTracePathTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspTracePathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table allows the determination of paths to known destinations using the same internal methods used by the switch to program these paths. It is indexed by destination switch address and a request identifier. If successful, the resulting path, which consists of a list of switch port addresses, is reported in the sfTracePathReqHopTable." ::= { vlanSflspTracePathInternal 1 } vlanSflspTracePathEntry OBJECT-TYPE SYNTAX VlanSflspTracePathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An SF Trace Path Table entry containing objects for a particular destination switch." INDEX { vlanSflspTracePathDest, vlanSflspTracePathID } ::= { vlanSflspTracePathTable 1 } VlanSflspTracePathEntry ::= SEQUENCE { vlanSflspTracePathDest OCTET STRING, vlanSflspTracePathID INTEGER, vlanSflspTracePathAction INTEGER, vlanSflspTracePathStatus INTEGER } vlanSflspTracePathDest OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The switch address of the requested destination." ::= { vlanSflspTracePathEntry 1 } vlanSflspTracePathID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for this path request." ::= { vlanSflspTracePathEntry 2 } vlanSflspTracePathAction OBJECT-TYPE SYNTAX INTEGER { other(1), activate(2), suspend(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to be performed by this trace path entry." ::= { vlanSflspTracePathEntry 3 } vlanSflspTracePathStatus OBJECT-TYPE SYNTAX INTEGER { other(1), success(2), failed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The results of a trace path request. A result of success(4) means the device has determined at least one path to the destination." ::= { vlanSflspTracePathEntry 4 } -- Trace Path List vlanSflspTracePathListTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspTracePathListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the SecureFast Trace Path List table." ::= { vlanSflspTracePathInternal 2 } vlanSflspTracePathListEntry OBJECT-TYPE SYNTAX VlanSflspTracePathListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the switch port addresses of each hop of each path traversed for a particular destination switch. These paths correspond to trace path requests in the sfTracePathReqTable." INDEX { vlanSflspTracePathListDest, vlanSflspTracePathListID, vlanSflspTracePathListPathNum, vlanSflspTracePathListHopNum } ::= { vlanSflspTracePathListTable 1 } VlanSflspTracePathListEntry ::= SEQUENCE { vlanSflspTracePathListDest OCTET STRING, vlanSflspTracePathListID INTEGER, vlanSflspTracePathListPathNum INTEGER, vlanSflspTracePathListHopNum INTEGER, vlanSflspTracePathListHopAddr OCTET STRING } vlanSflspTracePathListDest OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The switch address of the destination for this trace path entry, corresponding to a requested destination in the sfTracePathReqTable." ::= { vlanSflspTracePathListEntry 1 } vlanSflspTracePathListID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier corresponding to the identifier in a trace path request in the sfTracePathReqTable." ::= { vlanSflspTracePathListEntry 2 } vlanSflspTracePathListPathNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of this path in the table of networks traversed. This value represents a unique path id when there are multiple paths to a single destination." ::= { vlanSflspTracePathListEntry 3 } vlanSflspTracePathListHopNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The hop number in this path." ::= { vlanSflspTracePathListEntry 4 } vlanSflspTracePathListHopAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The switch port address of this hop on the path." ::= { vlanSflspTracePathListEntry 5 } -- vlanSflspLSDBFloodTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSflspLSDBFloodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFlood 1 } vlanSflspLSDBFloodEntry OBJECT-TYPE SYNTAX VlanSflspLSDBFloodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { vlanSflspLSDBFloodAreaID, vlanSflspLSDBFloodType, vlanSflspLSDBFloodLSID, vlanSflspLSDBFloodAdvSwitchID } ::= { vlanSflspLSDBFloodTable 1 } VlanSflspLSDBFloodEntry ::= SEQUENCE { vlanSflspLSDBFloodAreaID INTEGER, vlanSflspLSDBFloodType INTEGER, vlanSflspLSDBFloodLSID SfpsAddress, vlanSflspLSDBFloodAdvSwitchID SfpsAddress, vlanSflspLSDBFloodSequence INTEGER, vlanSflspLSDBFloodAge INTEGER, vlanSflspLSDBFloodChecksum INTEGER, vlanSflspLSDBFloodAdvertisement SfpsAddress, vlanSflspLSDBFloodUsedInSPF INTEGER, vlanSflspLSDBFloodEverUsed INTEGER } vlanSflspLSDBFloodAreaID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 1 } vlanSflspLSDBFloodType OBJECT-TYPE SYNTAX INTEGER { switchLink(1), connectionLink(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 2 } vlanSflspLSDBFloodLSID OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 3 } vlanSflspLSDBFloodAdvSwitchID OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 4 } vlanSflspLSDBFloodSequence OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 5 } vlanSflspLSDBFloodAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 6 } vlanSflspLSDBFloodChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 7 } vlanSflspLSDBFloodAdvertisement OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 8 } vlanSflspLSDBFloodUsedInSPF OBJECT-TYPE SYNTAX INTEGER { -- false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 9 } vlanSflspLSDBFloodEverUsed OBJECT-TYPE SYNTAX INTEGER { -- false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSDBFloodEntry 10 } --SFLSP Statistics vlanSflspLSPStatsMaxOnQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 1 } vlanSflspLSPStatsCurOnQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 2 } vlanSflspLSPStatsMaxTimeUs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 3 } vlanSflspLSPStatsCurTimeUs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 4 } vlanSflspLSPStatsMaxTimeOccurred OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 5 } vlanSflspLSPStatsMaxOnQOccurred OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 6 } vlanSflspLSPStatsTotalSwLinks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 7 } vlanSflspLSPStatsLastChangeDet OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 8 } vlanSflspLSPStatsNumSPFRuns OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 9 } vlanSflspLSPStatsNumFULLNbrs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 10 } vlanSflspLSPStatsNumIntfs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 11 } vlanSflspLSPStatsNum1stHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 12 } vlanSflspLSPStatsNumUpdates OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 13 } vlanSflspLSPStatsLastUpdateRecvd OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanSflspLSPStats 14 } END