CTRON-SSR-CONFIG-MIB DEFINITIONS ::= BEGIN -- This module provides authoritative definitions for Cabletron's -- enterprise-specific SNMP API to manage SmartSwitch Router -- configuration files and system images. -- -- This module will be extended, as required. -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright June 1998-2000 Cabletron Systems IMPORTS OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI ssrMibs FROM CTRON-SSR-SMI-MIB DisplayString, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ssrConfigMIB MODULE-IDENTITY LAST-UPDATED "200007150000Z" -- June 15, 2000 ORGANIZATION "Cabletron Systems, Inc" CONTACT-INFO "Enterasys Networks 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 (603) 332-9400 support@enterasys.com http://www.enterasys.com" DESCRIPTION "This mib module defines an SNMP API to manage SmartSwitch Router configuration files and system images" REVISION "200007150000Z" DESCRIPTION "Revision #3. Update contact information for Enterasys Networks as this mib is found on the Riverstione RS product line as well as Enterasys SSR product line." REVISION "200002200000Z" DESCRIPTION "Revision #2. add two objects to obtain current prom and firmware version." REVISION "9808170000Z" DESCRIPTION "Revision #1. Provide startup configuration file retrieval, startup log and append new commands." ::= { ssrMibs 230 } SSRErrorCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero defining the operation completion status." SYNTAX INTEGER { noStatus(1), timeout(2), networkError(3), noSpace(4), invalidConfig(5), commandCompleted(6), internalError(7), tftpServerError(8) } -- The Config Management Group cfgGroup OBJECT IDENTIFIER ::= { ssrMibs 231 } cfgTransferOp OBJECT-TYPE SYNTAX INTEGER { noop(1), sendConfigToAgent(2), receiveConfigFromAgent(3), receiveBootlogFromAgent(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Tranfer operation to be performed. Configuration files are ASCII NVT text files describing the operation of the shelf. Send operations use tftp to transfer a file from the manager to agent. Receive operations use tftp to transfer the file from the agent to the manager. Default value is no operation or noop." ::= { cfgGroup 1 } cfgManagerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address of the Manager to be used by the agent for for cfgTransferOp operations. Default value is 0.0.0.0. Address must be a unicast address that is reachable from the agent and no firewalls/acls preventing tftp datagrams from being transferred." ::= { cfgGroup 2 } cfgFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The file name to be retrieved from the tftp server at host cfgManagerAddress or to be written to. Default value is blank. Length of filename string must not exceed 255 alpha-numeric characters, no spaces in filenames." ::= { cfgGroup 3 } cfgActivateTransfer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Activate the file transfer operation with a value of True(1) or stop it with False(2). Poll cfgTransferStatus for current status. Default value is False. cfgFileName, cfgManagerAddress and cfgTransferOp must be valid prior to setting this object to True. This object is equivalent to the CLI command: copy tftp-server to startup if cfgRequestOp == sendConfig" ::= { cfgGroup 4 } cfgTransferStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), sending(2), receiving(3), transferComplete(4), error(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the transfer task. Default state is idle. sending indicates a file transfer (agent->mgr) in progress. receiving indicates sending a file from Manager to agent. transferComplete indicates a successful transfer. error indicates a failed transfer. See cfgLastError to diagnose why the transfer failed." ::= { cfgGroup 5 } cfgActivateFile OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Once a transfer to the SmartSwitchRouter is complete, Set this object to True to activate the new configuration. If activateConfigFile operation was successful, this object performs the CLI equivalent to these commands: negate all existing commands, copy scratchpad to active, copy scratchpad to startup" ::= { cfgGroup 6 } cfgLastError OBJECT-TYPE SYNTAX SSRErrorCode MAX-ACCESS read-only STATUS current DESCRIPTION "A reason code for the last transfer operation. Poll this value when doing sets against cfgMakeActive for config files obtain status." ::= { cfgGroup 7 } cfgLastErrorReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string representation of cfgLastError which may contain addtional details." ::= { cfgGroup 8 } -- Current system software image description cfgActiveImageVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Version string of the current image executing on this control module. This is the same description as the system show version command. example: 1.1.0.0" ::= { cfgGroup 9 } cfgActiveImageBootLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The URL location string from whence the current image was loaded. example: slot0:boot/ssr8.tar.gz/" ::= { cfgGroup 10 } -- Conformance statements configConformance OBJECT IDENTIFIER ::= { ssrConfigMIB 3 } configCompliances OBJECT IDENTIFIER ::= { configConformance 1 } configGroups OBJECT IDENTIFIER ::= { configConformance 2 } configCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for SNMP entities which implement the SmartSwitch Router Config Management MIB." MODULE -- this module MANDATORY-GROUPS { configGroup10 } ::= { configCompliances 1 } configCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the SmartSwitch Router Config Management MIB." MODULE -- this module MANDATORY-GROUPS { configGroup20 } ::= { configCompliances 2 } -- MIB groupings configGroup10 OBJECT-GROUP OBJECTS { cfgTransferOp, cfgManagerAddress, cfgFileName, cfgActivateTransfer, cfgTransferStatus, cfgActivateFile, cfgLastError, cfgLastErrorReason } STATUS deprecated DESCRIPTION "The collection of objects which are used to represent version 1.0 file transfer operations in the SmartSwitch Router." ::= { configGroups 1 } configGroup20 OBJECT-GROUP OBJECTS { cfgTransferOp, cfgManagerAddress, cfgFileName, cfgActivateTransfer, cfgTransferStatus, cfgActivateFile, cfgLastError, cfgLastErrorReason, cfgActiveImageVersion, cfgActiveImageBootLocation } STATUS current DESCRIPTION "The collection of objects which are used to represent version 2.0 configuration operations in the SmartSwitch Router version." ::= { configGroups 2 } END