CTRON-SSR-L2-MIB DEFINITIONS ::= BEGIN -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific schema to access SSR Layer 2 processing subsystem.. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright June 1998 Cabletron Systems IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks FROM SNMPv2-SMI PhysAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ssrMibs FROM CTRON-SSR-SMI-MIB; l2MIB MODULE-IDENTITY LAST-UPDATED "9802090000Z" ORGANIZATION "Cabletron Systems, Inc." CONTACT-INFO "Cabletron Systems, Inc. 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 (603) 332-9400 support@ctron.com http://www.ctron.com" DESCRIPTION "This module defines a schema to access SSR Layer 2 processing subsystem. This mib is no longer supported on ssr platforms. features of this mib now exist in standard mibs. RMON I RFC 1757 provides Layer 2 information and ctron-ssr-policy mib to program filter tables." REVISION "9909220000Z" DESCRIPTION "Firmware release 3.0 introduces full rmon I and II. this enterprise mib is now obsolete." ::= { ssrMibs 500 } -- The L2 Information Group l2Group OBJECT IDENTIFIER ::= { ssrMibs 2 } l2LearnedEntryDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The total number of Forwarding Database entries, which have been or would have been learned, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent." REFERENCE "RFC 1493 dot1dTp group dot1dTpLearnedEntryDiscards" ::= { l2Group 1 } l2LearnedMacEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The total number of MAC entries. The total number is equal to the number of unique VLAN id and MAC address pairs on the switch." ::= { l2Group 2 } l2LearnedFlowEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The total number of Flow entries. The total number is equal to the number of unique VLAN id, source MAC address and destination MAC address 3-tuple on the switch." ::= { l2Group 3 } -- The L2-Flow and Forward Database Table -- This L2 table contains information on all the layer 2 -- flows the switch is obsoletely processing. l2ForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of L2 flow entries." ::= { l2Group 4 } l2ForwardEntry OBJECT-TYPE SYNTAX L2ForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry containing the L2 flow" INDEX { l2ForwardFilterId, l2ForwardDstMacAddr, l2ForwardSrcMacAddr, l2ForwardVlanId } ::= { l2ForwardTable 1 } L2ForwardEntry ::= SEQUENCE { l2ForwardFilterId INTEGER, l2ForwardDstMacAddr PhysAddress, l2ForwardSrcMacAddr PhysAddress, l2ForwardVlanId INTEGER, l2ForwardDstPort INTEGER, l2ForwardInPorts OCTET STRING } l2ForwardFilterId OBJECT-TYPE SYNTAX INTEGER (0..14) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "A filter number which is used to get the next row from the L2 Forwarding table. A zero implies no filter. When a number is used, the index(s) specified in the first GET_NEXT is used as a filter for future GET_NEXT's using the same FilterId." -- DEFVAL { 0 } ::= { l2ForwardEntry 1 } l2ForwardDstMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The destination MAC address which has been learned." ::= { l2ForwardEntry 2 } l2ForwardSrcMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The source MAC address, which is present in case of a Flow, that has been learned by the switch." ::= { l2ForwardEntry 3 } l2ForwardVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The VLAN the destination MAC address belongs to." ::= { l2ForwardEntry 4 } l2ForwardDstPort OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The physical port number in the shelf/Chassis to which the frame will be forwarded. A zero implies that the frame destined to this destination MAC address will be forwarded to multiple ports. This implies a Multicast or unknown Unicast frame." ::= { l2ForwardEntry 5 } l2ForwardInPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The set of physical ports to which this entry is contained in the L2 tables. Each octet within the value of this object specifies a set of eight ports. The first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port and the most significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length. The maximum number of ports/card-module is sysHwModuleNumPorts." ::= { l2ForwardEntry 6 } -- The L2-Flow Priority Table -- This L2 table contains information on all the layer 2 -- flow priorities/Quality of Service. l2PriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF L2PriorityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of L2 flow entries." ::= { l2Group 5 } l2PriorityEntry OBJECT-TYPE SYNTAX L2PriorityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry containing the L2 flow." INDEX { l2PriorityIndex } ::= { l2PriorityTable 1 } L2PriorityEntry ::= SEQUENCE { l2PriorityIndex INTEGER, l2PriorityDesc OCTET STRING, l2PriorityDstMacAddr PhysAddress, l2PrioritySrcMacAddr PhysAddress, l2PriorityVlanId INTEGER, l2PriorityInPorts OCTET STRING, l2Priority INTEGER } l2PriorityIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) -- TODO verify this MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A unique index into the L2 priority table." ::= { l2PriorityEntry 1 } l2PriorityDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..25)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A string used to identify the flow by name." ::= { l2PriorityEntry 2 } l2PriorityDstMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The destination MAC address which has been learned." ::= { l2PriorityEntry 3 } l2PrioritySrcMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The source MAC address, which is present in case of a Flow, that has been learned by the switch." ::= { l2PriorityEntry 4 } l2PriorityVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The VLAN the destination MAC address belongs to." ::= { l2PriorityEntry 5 } l2PriorityInPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The set of physical ports which allow this source MAC address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length. The maximum number of ports per Module/Card is sysHwModuleNumPorts." ::= { l2PriorityEntry 6 } l2Priority OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3), control(4) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The priority for this L2 flow. There are four priority levels: low, medium, high and control. The highest priority class is reserved for router control traffic, which leaves three classes, high, medium, and low for normal data flows. Buffered traffic in higher priority classes is sent ahead of pending traffic in lower priority classes, which allows latency and throughput demands to be maintained for the higher priority traffic. To prevent low priority traffic from waiting indefinitely as higher priority traffic fills the wire, a weighted fair queuing mechanism provides adjustable minimum bandwidth guarantees at each output port, thereby ensuring that some traffic from each priority class always gets through." ::= { l2PriorityEntry 7 } -- The L2 Filter Table -- This L2 table contains information on all the layer 2 -- address filters, static entries & address locks l2FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF L2FilterEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of L2 filters." ::= { l2Group 6 } l2FilterEntry OBJECT-TYPE SYNTAX L2FilterEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry containing the L2 filter." INDEX { l2FilterIndex } ::= { l2FilterTable 1 } L2FilterEntry ::= SEQUENCE { l2FilterIndex INTEGER, l2FilterDesc OCTET STRING, l2FilterType INTEGER, l2FilterRestrictions INTEGER, l2FilterDstMacAddr PhysAddress, l2FilterSrcMacAddr PhysAddress, l2FilterVlanId INTEGER, l2FilterInPorts OCTET STRING, l2FilterOutPorts OCTET STRING } l2FilterIndex OBJECT-TYPE SYNTAX INTEGER (0..7) -- TODO verify this MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A unique index into the table." ::= { l2FilterEntry 1 } l2FilterDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..25)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A string used to identify the filter by an name." ::= { l2FilterEntry 2 } l2FilterType OBJECT-TYPE SYNTAX INTEGER { staticEntry(1), addressFilter(2), addressLock(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The types of filters, as explained below. static-entry Based on the restrictions and the presence of source, destination MAC address they can be of three types : source-static-entry - All frames with a source address equal to srcMAC, coming through any of the inPorts will be allowed/disallowed to go to any port that is a member of the outPorts list. destination-static-entry - All frames with a destination address equal to dstMAC, coming through any of the inPorts will be allowed/ disallowed/forced to go to any port that is a member of the outPorts list. flow-static-entry - All frames with a source address equal to srcMAC and a destination address equal to dstMAC, coming through any of the inPorts list will be allowed/disallowed to go to any port that is a member of the outPorts list. address-filter Based on the restrictions and the presence of source, destination MAC address they can be of three types : source-address-filter - All frames with a source address equal to srcMAC, coming through any of the inPorts will be filtered out. destination-address-filter - All frames with a destination address equal to dstMAC, coming through any of the inPorts will be filtered out. flow-filter - All frames with a source address equal to srcMAC and a destination address equal to dstMAC, coming through any of the inPorts list will be filtered out. address-lock This locks a source address to a port. It allows learning of srcMAC addresses only on any of the ports in inPorts." ::= { l2FilterEntry 3 } l2FilterRestrictions OBJECT-TYPE SYNTAX INTEGER { allow(1), disallow(2), force(3), none(4) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The restrictions which are applied when the filterType is static-entry." ::= { l2FilterEntry 4 } l2FilterSrcMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The source MAC address, which is present in case of a Flow, that has been learned by the switch." ::= { l2FilterEntry 5 } l2FilterDstMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The destination MAC address which has been learned." ::= { l2FilterEntry 6 } l2FilterVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The VLAN the destination MAC address belongs to." ::= { l2FilterEntry 7 } l2FilterInPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The set of physical ports which allow this source MAC address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length. The maximum number of ports/card-module is sysHwModuleNumPorts." ::= { l2FilterEntry 8 } l2FilterOutPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The set of ports which allow this destination MAC address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length." ::= { l2FilterEntry 9 } -- The L2 Port Security Table -- This L2 table contains information on all the layer 2 -- port security filters. l2PortSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF L2PortSecurityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of L2 port security filters." ::= { l2Group 7 } l2PortSecurityEntry OBJECT-TYPE SYNTAX L2PortSecurityEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry containing the L2 filter." INDEX { l2PortSecurityIndex } ::= { l2PortSecurityTable 1 } L2PortSecurityEntry ::= SEQUENCE { l2PortSecurityIndex INTEGER, l2PortSecurityDesc OCTET STRING, l2PortSecurityType INTEGER, l2PortSecurityVlanId INTEGER, l2PortSecurityInPorts OCTET STRING } l2PortSecurityIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) -- TODO: verify this MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A unique index into the table." ::= { l2PortSecurityEntry 1 } l2PortSecurityDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..25)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "A string used to identify the filter by a name." ::= { l2PortSecurityEntry 2 } l2PortSecurityType OBJECT-TYPE SYNTAX INTEGER { sourceSecure(1), destinationSecure(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The security filters are of two types : source-secure For all the ports in inPorts forward only those frames that match source-static-entry filter from the l2FilterTable. destination-secure For all the ports in inPorts forward only those frames that match destination-static-entry filter from the l2FilterTable." ::= { l2PortSecurityEntry 3 } l2PortSecurityVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The VLAN the destination MAC address belongs to." ::= { l2PortSecurityEntry 4 } l2PortSecurityInPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The set of physical ports which allow this source MAC address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered port, and the most significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of zeroes of appropriate length." ::= { l2PortSecurityEntry 5 } -- Port Table l2PortTable OBJECT-TYPE SYNTAX SEQUENCE OF L2PortEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains information about every physical port that is associated with this transparent bridge." ::= { l2Group 8 } l2PortEntry OBJECT-TYPE SYNTAX L2PortEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of information for each physical port." INDEX { l2Port } ::= { l2PortTable 1 } L2PortEntry ::= SEQUENCE { l2Port INTEGER, l2PortAgingStatus INTEGER, l2PortAgingTime INTEGER, l2PortDemandAgeHiBound INTEGER, l2PortDemandAgeLowBound INTEGER, l2PortDemandAgeCount Counter32, l2PortLearnedEntryDiscards Counter32, l2PortSrcEntries Counter32, l2PortDstEntries Counter32, l2PortMgmtEntries Counter32, l2PortMaxInfo INTEGER, l2PortInFrames Counter32, l2PortOutFrames Counter32 } l2Port OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The port number of the port for which this entry contains Transparent bridging management information." ::= { l2PortEntry 1 } l2PortAgingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled (2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Whether aging is enabled or not on this port." ::= { l2PortEntry 2 } l2PortAgingTime OBJECT-TYPE SYNTAX INTEGER (5..1000000) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The time-out period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds." REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" ::= { l2PortEntry 3 } l2PortDemandAgeHiBound OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "When the number of MAC entries on a physical port's L2 table reaches the l2PortDemandAgeHiBound (95% full), a number of MAC entries based on l2PortDemandAgeLowBound percentage will be removed (aged-out) from the table." ::= { l2PortEntry 4 } l2PortDemandAgeLowBound OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The l2PortDemandAgeLowBound value determines how many MAC entries need to be aged-out. See l2PortDemandAgeHiBound. Default value is 85%. Example: if - L2 table capacity = 10,000 entries - l2PortDemandAgeHiBound = 95% - l2PortDemandAgeLowBound = 85% When the L2 table reaches 95% capacity (9500 MAC entries), 10% of the entries will be aged-out." ::= { l2PortEntry 5 } l2PortDemandAgeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of times demand aging has taken place on this physical port." ::= { l2PortEntry 6 } l2PortLearnedEntryDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The total number of L2 Port table entries, which have been or would have been learned, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the L2 port table is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent." ::= { l2PortEntry 7 } l2PortSrcEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of MAC addresses/Flow entries that reside on this ports L2 table as a source (i.e. for a flow entry the source and destination MAC address's lie on the same LAN segment)." ::= { l2PortEntry 8 } l2PortDstEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of MAC addresses/Flow entries that reside on this ports L2 table as a destination (i.e. for a flow entry the destination MAC address was not learned as a source)." ::= { l2PortEntry 9 } l2PortMgmtEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of user configured entries, including filters, bridge management addresses etc." ::= { l2PortEntry 10 } l2PortMaxInfo OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The maximum size of the info/data (non-MAC) field that this port will receive or transmit. See RFC 1493 for similar OID called dot1dTpPortMaxInfo." ::= { l2PortEntry 11 } l2PortInFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { l2PortEntry 12 } l2PortOutFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { l2PortEntry 13 } -- Port L2 Forward Table l2PortForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF L2PortForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains information about the Forward/Flow Table that is associated with this port." ::= { l2Group 9 } l2PortForwardEntry OBJECT-TYPE SYNTAX L2PortForwardEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of Flow/Forward information for this port." INDEX { l2PortForwardPort, l2PortForwardIndex } ::= { l2PortForwardTable 1 } L2PortForwardEntry ::= SEQUENCE { l2PortForwardPort INTEGER, l2PortForwardIndex INTEGER, l2PortForwardDstMacAddr PhysAddress, l2PortForwardSrcMacAddr PhysAddress, l2PortForwardVlanId INTEGER, l2PortForwardDstPort INTEGER, l2PortForwardStatus INTEGER, l2PortForwardLastDetectedTime TimeTicks } l2PortForwardPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The port number of the port for which this entry contains Transparent bridging management information." ::= { l2PortForwardEntry 1 } l2PortForwardIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "A unique index into the Flow/Forward database table." ::= { l2PortForwardEntry 2 } l2PortForwardDstMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The destination MAC address which has been learned." ::= { l2PortForwardEntry 3 } l2PortForwardSrcMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The source MAC address, which is present in case of a Flow, that has been learned by the switch." ::= { l2PortForwardEntry 4 } l2PortForwardVlanId OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The VLAN the destination MAC address belongs to." ::= { l2PortForwardEntry 5 } l2PortForwardDstPort OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The physical port number to which the frame will be forwarded. A zero implies that the frame destined to this destination MAC address will be forwarded to multiple ports. This implies a Multicast or unknown Unicast frame." ::= { l2PortForwardEntry 6 } l2PortForwardStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress." ::= { l2PortForwardEntry 7 } l2PortForwardLastDetectedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The time (in hundredths of a second) since the last time this MAC address was detected by this port." ::= { l2PortForwardEntry 8 } -- ### Compliance ### l2Conformance OBJECT IDENTIFIER ::= { l2MIB 2 } l2Compliances OBJECT IDENTIFIER ::= { l2Conformance 1 } l2Groups OBJECT IDENTIFIER ::= { l2Conformance 2 } l2ComplianceV10 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for the SSR-L2-MIB." MODULE -- this module MANDATORY-GROUPS { l2ConfGroupV10 } ::= { l2ConfGroupV10 1 } l2ConfGroupV10 OBJECT-GROUP OBJECTS { l2LearnedEntryDiscards, l2LearnedMacEntries, l2LearnedFlowEntries, l2ForwardFilterId, l2ForwardDstMacAddr, l2ForwardSrcMacAddr, l2ForwardVlanId, l2ForwardDstPort, l2ForwardInPorts, l2PriorityIndex, l2PriorityDesc, l2PriorityDstMacAddr, l2PrioritySrcMacAddr, l2PriorityVlanId, l2PriorityInPorts, l2Priority, l2FilterIndex, l2FilterDesc, l2FilterType, l2FilterRestrictions, l2FilterSrcMacAddr, l2FilterDstMacAddr, l2FilterVlanId, l2FilterInPorts, l2FilterOutPorts, l2PortSecurityIndex, l2PortSecurityDesc, l2PortSecurityType, l2PortSecurityVlanId, l2PortSecurityInPorts, l2Port, l2PortAgingStatus, l2PortAgingTime, l2PortDemandAgeHiBound, l2PortDemandAgeLowBound, l2PortDemandAgeCount, l2PortLearnedEntryDiscards, l2PortSrcEntries, l2PortDstEntries, l2PortMgmtEntries, l2PortMaxInfo, l2PortInFrames, l2PortOutFrames, l2PortForwardPort, l2PortForwardIndex, l2PortForwardDstMacAddr, l2PortForwardSrcMacAddr, l2PortForwardVlanId, l2PortForwardDstPort, l2PortForwardStatus, l2PortForwardLastDetectedTime } STATUS obsolete DESCRIPTION "A set of managed objects that make up version 1.0 of the SSR Layer 2 mib." ::= { l2Groups 1 } END