-- -- Copyright (c) 2002 by EqualLogic, Inc. -- -- All rights reserved. This software may not be copied, disclosed, -- transferred, or used except in accordance with a license granted -- by EqualLogic, Inc. This software embodies proprietary information -- and trade secrets of EqualLogic, Inc. -- SCSI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32, Counter64, Gauge32, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TimeStamp, TruthValue, RowStatus, RowPointer, AutonomousType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; scsiModule MODULE-IDENTITY LAST-UPDATED "200202250000Z" -- 25 February 2002 ORGANIZATION "IETF" CONTACT-INFO " Michele Hallak-Stamler Sanrad Intelligent Network 32 Habarzel Street Tel Aviv, Israel Phone: +972 3 7674809 E-mail: michele@sanrad.com Yaron Lederman Siliquent Technologies Ltd. 33 Bezalel Street Ramat Gan, Israel Phone: +972 3 7552320 E-mail: yaronl@siliquent.com Mark Bakke Postal: Cisco Systems, Inc 6450 Wedgwood Road, Suite 130 Maple Grove, MN USA 55311 Phone: +1 763-398-1000 Fax: +1 763-398-1001 E-mail: mbakke@cisco.com Marjorie Krueger Postal: Hewlett-Packard Networked Storage Architecture Networked Storage Solutions Org. 8000 Foothills Blvd. Roseville, CA 95747 Phone: +1 916-785-2656 Phone: +1 916-785-0391 E-mail: marjorie_krueger@hp.com Keith McCloghrie Cisco Systems, Inc. Postal: 170 West Tasman Drive San Jose, CA USA 95134 Phone: +1 408 526-5260 E-mail: kzm@cisco.com " DESCRIPTION "The SCSI MIB" -- Revision History REVISION "200202250000Z" DESCRIPTION " Initial version published as RFC nnnn." ::= { mib-2 999} -- must be changed in the future ---------------------- Textual Conventions ------------------------- ScsiLUNOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " This Textual Convention represents either a SCSI Logical Unit Number (LUN) or a zero-length string. Objects defined with this syntax must specify the meaning of the zero-length string. The format of a LUN is: - a zero-length octet string or - a string of two octets if the underlying transport protocol is SBP-3 or SPI-4 using data group transfers or - a string of eight octets for all other cases." SYNTAX OCTET STRING (SIZE (0 | 2 | 8)) ScsiIndexValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " An arbitrary integer value, greater than zero, for use as a unique index value." SYNTAX Unsigned32(1..4294967295) ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the ScsiIndexValue convention. The latter defines a greater than zero value used to identify an index. This extension permits the additional value of zero and is applicable only to indices of SCSI port. Usage of the zero is object-specific and must therefore be defined as part of the description of any object, which uses this syntax. Examples of the usage of zero might include situations where index was unknown, or when none or all indices need to be referenced." SYNTAX Unsigned32(0..4294967295) ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the ScsiIndexValue convention. The latter defines a greater than zero value used to identify an index. This extension permits the additional value of zero. Usage of the zero is object- specific and must therefore be defined as part of the description of any object, which uses this syntax. Examples of the usage of zero might include situations where index was unknown, or when none or all indices need to be referenced." SYNTAX Unsigned32(0..4294967295) ScsiIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention represents a generic SCSI device or port identifier. The format depends on the transport used: - SPI: only bits:0-3 for a port identifier (LSB is 0 and MSB is 3). Other bits must be zero. - SPI: identifier of a device is a zero-length octet string. - FCP: 3 bytes for a port identifier - FCP: identifier of a device is a zero-length octet string. - SRP: 16 bytes for a port identifier. - SRP: it is a zero-length octet string for a device identifier. - iSCSI: 256 bytes for a device identifier. - iSCSI: 258 bytes for a target port identifier. - iSCSI: 262 bytes for an initiator port identifier. - SBP: it is a zero-length octet string for a device identifier. - SBP: 2 bytes for an initiator port identifier. - SBP: 11 bytes for a target port identifier. " SYNTAX OCTET STRING (SIZE (0 | 1 | 2 | 3| 11 | 16 | 256| 258|262)) ScsiName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " This Textual Convention represents a generic SCSI device or port name. The format depends on the transport used: - SPI: it is a zero-length octet string for a device or port name. - FCP: 8 bytes for a port name. - FCP: it is a zero-length octet string for a device name. - SRP: 16 bytes for a port name. - SRP: it is a zero-length octet string for a device name. - iSCSI: 256 bytes for a device name. - iSCSI: 258 bytes for a target port name. - iSCSI: 262 bytes for an initiator port name. - SBP: it is a zero-length octet string for a device name. - SBP: 8 bytes for an initiator port name. - SBP: 11 bytes for a target port name. " SYNTAX OCTET STRING (SIZE (0 | 8 | 11 |16 | 256 | 258| 262)) ScsiNameIdOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " This Textual Convention represents either the SCSI name of a logical unit or a zero-length string. Objects defined with this syntax must specify the meaning of the zero-length string. The format of the name of a LU is: - a zero-length octet string or - a string of eight octets." SYNTAX OCTET STRING (SIZE (0 | 8)) ScsiDeviceOrPort ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This type specifies whether a particular configuration is applicable to a port or to a device." SYNTAX INTEGER { device(1), port(2), other(3) } ScsiIdCodeSet ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies the code set in use with this identifier. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32(0..15) ScsiIdAssociation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies what the identifier is associated with (e.g, with the addressed physical/logical device or with a particular port). The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32(0..3) ScsiIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies the type of the identifier. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32(0..15) ScsiIdValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention represents an identifier. The objects of type ScsiIdCodeSet, ScsIdAssociation, ScsiIdType, define together the format. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX OCTET STRING (SIZE (0..255)) HrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value for a software module's row in the Host Resources MIB's hrSWInstalledTable. A zero value indicates that no row in the hrSWInstalledTable is applicable." REFERENCE "hrSWInstalledTable is defined in the Host Resources MIB, RFC 2790." SYNTAX Integer32 (0..2147483647) ----------------------- Structure of the MIB ---------------------- scsiObjects OBJECT IDENTIFIER ::= { scsiModule 1 } scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 } scsiConformance OBJECT IDENTIFIER ::= { scsiModule 3 } scsiTransportTypes OBJECT IDENTIFIER ::= { scsiObjects 1 } scsiGeneral OBJECT IDENTIFIER ::= { scsiObjects 2 } scsiInitiator OBJECT IDENTIFIER ::= { scsiObjects 3 } scsiTarget OBJECT IDENTIFIER ::= { scsiObjects 4 } scsiLogicalUnit OBJECT IDENTIFIER ::= { scsiObjects 5 } -- Transport Types scsiTranportOther OBJECT IDENTIFIER ::= { scsiTransportTypes 1 } scsiTranportSPI OBJECT IDENTIFIER ::= { scsiTransportTypes 2 } scsiTransportFCP OBJECT IDENTIFIER ::= { scsiTransportTypes 3 } scsiTransportSRP OBJECT IDENTIFIER ::= { scsiTransportTypes 4 } scsiTransportISCSI OBJECT IDENTIFIER ::= { scsiTransportTypes 5 } scsiTransportSBP OBJECT IDENTIFIER ::= { scsiTransportTypes 6 } ----------------------- Instance Table ----------------------------- scsiInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI instances present on the system. The SCSI Instance is the top-level entity, to which everything else belongs. An SNMP agent could represent more than one instance if it represents either a stack of devices, or virtual partitions of a larger device, or a host running multiple SCSI implementations from different vendors." ::= { scsiGeneral 1 } scsiInstanceEntry OBJECT-TYPE SYNTAX ScsiInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI instance." INDEX { scsiInstIndex } ::= { scsiInstanceTable 1 } ScsiInstanceEntry::= SEQUENCE { scsiInstIndex ScsiIndexValue, scsiInstAlias SnmpAdminString, scsiInstSoftwareIndex HrSWInstalledIndexOrZero, scsiInstVendorVersion SnmpAdminString, scsiInstScsiNotificationsEnable TruthValue } scsiInstIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents an arbitrary integer used to uniquely identify a particular SCSI instance." ::= { scsiInstanceEntry 1 } scsiInstAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents an administrative string, configured by the administrator. It can be a zero-length string." ::= { scsiInstanceEntry 2 } scsiInstSoftwareIndex OBJECT-TYPE SYNTAX HrSWInstalledIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If this management instance corresponds to an installed software module, then this object's value is the value of the hrSWInstalledIndex of that module. If there is no correspondence to an installed software module (or no module which has a hrSWInstalledIndex value), then the value of this object is zero." REFERENCE "hrSWInstalledIndex is defined in the Host Resources MIB, RFC 2790." ::= { scsiInstanceEntry 3 } scsiInstVendorVersion OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents a text string set by the manufacturer describing the version of this instance. The format of this string is determined solely by the manufacturer, and is for informational purposes only. It is unrelated to the SCSI specification version numbers." ::= { scsiInstanceEntry 4 } scsiInstScsiNotificationsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable/disable sending all the notifications defined in this MIB." DEFVAL { true } ::= { scsiInstanceEntry 5 } scsiDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI Devices present on the system." ::= { scsiGeneral 2 } scsiDeviceEntry OBJECT-TYPE SYNTAX ScsiDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI Device included in this SCSI manageable instance." INDEX { scsiInstIndex, scsiDeviceIndex } ::= { scsiDeviceTable 1 } ScsiDeviceEntry::= SEQUENCE { scsiDeviceIndex ScsiIndexValue, scsiDeviceAlias SnmpAdminString, scsiDeviceRole BITS, scsiDevicePortNumber Unsigned32, scsiDeviceResets Counter32 } scsiDeviceIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object is an arbitrary integer used to uniquely identify a particular device within a particular SCSI instance." ::= { scsiDeviceEntry 1 } scsiDeviceAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents is an admistrative name for this device. If no name is assigned, the value of this object is the zero-length string." ::= { scsiDeviceEntry 2 } scsiDeviceRole OBJECT-TYPE SYNTAX BITS { target(0), initiator(1) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object determines whether this device is acting as an initiator device, or as a target device or as both." ::= { scsiDeviceEntry 3 } scsiDevicePortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of ports contained in this device." ::= { scsiDeviceEntry 4 } scsiDeviceResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of times that this device has reset." ::= { scsiDeviceEntry 5 } ----------------------- Port Table --------------------------------- scsiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI Ports for each SCSI device in each instance." ::= { scsiGeneral 3 } scsiPortEntry OBJECT-TYPE SYNTAX ScsiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI port of a particular SCSI device in a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex } ::= { scsiPortTable 1 } ScsiPortEntry ::= SEQUENCE { scsiPortIndex ScsiIndexValue, scsiPortRole BITS, scsiPortTrnsptPtr OCTET STRING, -- was RowPointer, scsiPortBusyStatuses Counter32 } scsiPortIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular port of a given device within a particular SCSI instance." ::= { scsiPortEntry 1 } scsiPortRole OBJECT-TYPE SYNTAX BITS { target(0), initiator(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this port is acting as an initiator port, or as a target port or as both." ::= { scsiPortEntry 2 } scsiPortTrnsptPtr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a pointer to the corresponding row in the scsiTrnsptTable" ::= { scsiPortEntry 3 } scsiPortBusyStatuses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of port busy status sent or received by this port. Note: Initiator ports only receive busy status and target ports only send busy status." ::= { scsiPortEntry 4 } scsiTrnsptTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiTrnsptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of transports in use with each SCSI device." ::= { scsiGeneral 5 } scsiTrnsptEntry OBJECT-TYPE SYNTAX ScsiTrnsptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing parameters applicable to a transport used by a particular device of a particular SCSI manageable instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiTrnsptIndex} ::= { scsiTrnsptTable 1 } ScsiTrnsptEntry ::= SEQUENCE { scsiTrnsptIndex ScsiIndexValue, scsiTrnsptType OCTET STRING, -- was AutonomousType, scsiTrnsptPointer OCTET STRING, -- was RowPointer, scsiTrnsptDevName ScsiName } scsiTrnsptIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular transport within a given device within a particular SCSI instance." ::= { scsiTrnsptEntry 1 } scsiTrnsptType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) -- was AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the type of transport for this particular transport." ::= { scsiTrnsptEntry 2 } scsiTrnsptPointer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents a pointer to a conceptual row in a 'transport' MIB allowing a manager to get useful information for the transport described by this entry. For example, if the transport of this device is iSCSI, this object will point to the iSCSI Instance of the iSCSI MIB. If there is no MIB for this transport, this object has the value 0.0." ::= { scsiTrnsptEntry 3 } scsiTrnsptDevName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the name of this device in one of the format(s) appropriate for this type of transport." ::= { scsiTrnsptEntry 4 } ----------------------- Initiator Device Table --------------------- scsiIntrDevTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiIntrDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information for each local initiator device." ::= { scsiInitiator 1} scsiIntrDevEntry OBJECT-TYPE SYNTAX ScsiIntrDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to an initiator device within a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex } ::= { scsiIntrDevTable 1 } ScsiIntrDevEntry ::= SEQUENCE { scsiIntrDevTgtAccessMode INTEGER, scsiIntrDevOutResets Counter32 } scsiIntrDevTgtAccessMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), autoEnable(2), manualEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether a discovered target is immediately authorized or not: - autoEnable (2) means that when an initiator discovers a target, it can use it immediately, - manualEnable (3) means that the initiator must wait for an operator to set scsiIntrDscTgtConfigured = true before it is authorized." ::= { scsiIntrDevEntry 1 } scsiIntrDevOutResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of resets sent by this initiator." ::= { scsiIntrDevEntry 2 } -- The following section describes managed objects related to -- initiator ports. scsiIntrPrtTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the initiator ports of local SCSI Initiator or Target/Initiator devices." ::= { scsiInitiator 3 } scsiIntrPrtEntry OBJECT-TYPE SYNTAX ScsiIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular initiator port of a particular device within a SCSI instance. " INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex } ::= { scsiIntrPrtTable 1 } ScsiIntrPrtEntry ::= SEQUENCE { scsiIntrPrtName ScsiName, scsiIntrPrtIdentifier ScsiIdentifier, scsiIntrPrtOutCommands Counter32, scsiIntrPrtWrittenMegaBytes Counter32, scsiIntrPrtReadMegaBytes Counter32, scsiIntrPrtHSOutCommands Counter64 } scsiIntrPrtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the name of the port assigned for use by the SCSI protocol. The format will depend of the type of transport this port is using." ::= { scsiIntrPrtEntry 1 } scsiIntrPrtIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the identifier of the port in one of the format(s) appropriate for the type of transport in use." ::= { scsiIntrPrtEntry 2 } scsiIntrPrtOutCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by this initiator." ::= { scsiIntrPrtEntry 3 } scsiIntrPrtWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes sent by this initiator." ::= { scsiIntrPrtEntry 4 } scsiIntrPrtReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes received by this initiator." ::= { scsiIntrPrtEntry 5 } scsiIntrPrtHSOutCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by this initiator device. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { scsiIntrPrtEntry 6 } scsiRemoteTarget OBJECT IDENTIFIER ::= { scsiInitiator 4 } -- Targets discovered or authorized to attach each of the initiator -- ports of each initiator device of each instance. scsiDscTgtTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiDscTgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) target ports that are authorized to attach to each local initiator port of this SCSI instance." ::= { scsiRemoteTarget 1 } scsiDscTgtEntry OBJECT-TYPE SYNTAX ScsiDscTgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents an authorization for one or all local initiator ports of a local device (scsiDeviceIndex) within a local SCSI instance (scsiInstIndex), to attach to a remote target port or device (scsiDscTgtIndex). The authorization is either for all local ports if scsiDscTgtIntrPortIndex is zero, or otherwise only for the specific port identified by scsiDscTgtIntrPortIndex. Note that when an entry in this table is deleted, then any corresponding entries in the scsiDscLunsTable should be deleted as well." INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, scsiDscTgtIndex } ::= { scsiDscTgtTable 1 } ScsiDscTgtEntry ::= SEQUENCE { scsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero, scsiDscTgtIndex ScsiIndexValue, scsiDscTgtDevOrPort ScsiDeviceOrPort, scsiDscTgtName ScsiName, scsiDscTgtConfigured TruthValue, scsiDscTgtDiscovered TruthValue, scsiDscTgtInCommands Counter32, scsiDscTgtWrittenMegaBytes Counter32, scsiDscTgtReadMegaBytes Counter32, scsiDscTgtHSInCommands Counter64, scsiDscTgtLastCreation TimeStamp, scsiDscTgtRowStatus RowStatus } scsiDscTgtIntrPortIndex OBJECT-TYPE SYNTAX ScsiPortIndexValueOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object relates to a particular local device within a particular SCSI instance and specifies: - the index of the local scsi initiator port, - or zero, if this entry refers to the local device and therefore refers to all the local initiator ports." ::= { scsiDscTgtEntry 1 } scsiDscTgtIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an arbitrary integer used to uniquely identify a particular authorized target amongst those authorized for one or more ports (of a particular device within a particular SCSI instance) to attach to." ::= { scsiDscTgtEntry 2 } scsiDscTgtDevOrPort OBJECT-TYPE SYNTAX ScsiDeviceOrPort MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether the authorization represented by this row applies to a remote target port or remote target device." ::= { scsiDscTgtEntry 3 } scsiDscTgtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-create STATUS current DESCRIPTION " This object represents the name of this authorized/discovered target device or port." ::= { scsiDscTgtEntry 4 } scsiDscTgtConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object means: -true(1): this entry has been configured by an administrator -false(2): this entry has been added from other source. An administrator can modify this value from false to true." DEFVAL { true } ::= { scsiDscTgtEntry 5 } scsiDscTgtDiscovered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object means: -true(1): this entry has been discovered by the SCSI instance. -false(2): this entry has been added from other source. This entry is read-only because an administrator cannot change it. Note that it is an implementation decision to determine how long to retain a row with configured=false, as and when the target is no longer visible/accessible to the local initiator." ::= { scsiDscTgtEntry 6 } scsiDscTgtInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received by this target port or device." ::= { scsiDscTgtEntry 7 } scsiDscTgtWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes written by this target port or device." ::= { scsiDscTgtEntry 8 } scsiDscTgtReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes read by this target port or device." ::= { scsiDscTgtEntry 9 } scsiDscTgtHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received by this target port or device. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { scsiDscTgtEntry 10 } scsiDscTgtLastCreation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the value of sysUpTime when this row was created." ::= { scsiDscTgtEntry 11 } scsiDscTgtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to configure dynamically a new entry in this table via SNMP or eventually delete it. An administrator is not allowed to delete an entry for which the value of the object scsiIntrDscTgtDiscovered is equal to true. Note that when an entry in this table is deleted, then any corresponding entries in the scsiDscLunsTable must also be automatically deleted. " ::= { scsiDscTgtEntry 12 } scsiDscLunTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiDscLunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) logical unit numbers (LUNS) discovered via each local initiator port of each local device within a particular SCSI instance." ::= { scsiRemoteTarget 2 } scsiDscLunEntry OBJECT-TYPE SYNTAX ScsiDscLunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a discovered LUN at a particular SCSI target device (scsiDscTgtIndex), where the LUN was discovered by a particular local initiator device within a particular SCSI instance, possibly via a particular local initiator port. Note that when an entry in the scsiDscTgtTable is deleted, then any corresponding entries in this table is automatically deleted." INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, scsiDscTgtIndex, scsiDscLunIndex } ::= { scsiDscLunTable 1 } ScsiDscLunEntry ::= SEQUENCE { scsiDscLunIndex ScsiIndexValue, scsiDscLunLun ScsiLUNOrZero } scsiDscLunIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an arbitrary integer used to uniquely identify a particular LUN discovered by a particular scsi initiator port or a particular SCSI initiator device within a particular SCSI instance. Entries in the scsiDscLunIdTable are associated with a LUN by having the value of this object in their INDEX." ::= { scsiDscLunEntry 1 } scsiDscLunLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Logical Unit Number (LUN) of the discovered logical unit. A value of zero has no meaning in this case." ::= { scsiDscLunEntry 2 } ----------------------- LU Identifiers discovered ------------------ scsiDscLunIdTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiDscLunIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the known LU Identifiers of the remote (not in the local system) logical units discovered via each local initiator port or device of this SCSI instance." ::= { scsiRemoteTarget 3 } scsiDscLunIdEntry OBJECT-TYPE SYNTAX ScsiDscLunIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents the LU Identifier of a discovered LUN at a particular SCSI target device (scsiDscTgtIndex), where the LUN was discovered by a particular local initiator device within a particular SCSI instance, possibly via a particular local initiator port." INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, scsiDscTgtIndex, scsiDscLunIndex, scsiDscLunIdIndex } ::= { scsiDscLunIdTable 1 } ScsiDscLunIdEntry ::= SEQUENCE { scsiDscLunIdIndex ScsiIndexValue, scsiDscLunIdCodeSet ScsiIdCodeSet, scsiDscLunIdAssociation ScsiIdAssociation, scsiDscLunIdType ScsiIdType, scsiDscLunIdValue ScsiIdValue } scsiDscLunIdIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an arbitrary integer used to uniquely identify a particular LUN Identifier discovered by each scsi initiator device or particular SCSI initiator port within a particular SCSI instance." ::= { scsiDscLunIdEntry 1 } scsiDscLunIdCodeSet OBJECT-TYPE SYNTAX ScsiIdCodeSet MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the code set in use with this identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2),Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiDscLunIdEntry 2 } scsiDscLunIdAssociation OBJECT-TYPE SYNTAX ScsiIdAssociation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies what the identifier is associated with (e.g, with the addressed physical/logical device or with a particular port). The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiDscLunIdEntry 3 } scsiDscLunIdType OBJECT-TYPE SYNTAX ScsiIdType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of the identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiDscLunIdEntry 4 } scsiDscLunIdValue OBJECT-TYPE SYNTAX ScsiIdValue MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the actual value of this identifier. The format is defined by the objects scsiDscLunIdCodeSet, scsiDscLunIdAssociation, scsiDscLunIdType. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiDscLunIdEntry 5 } scsiAttTgtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiAttTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) target ports that are currently attached to each local initiator port of this SCSI instance." ::= { scsiRemoteTarget 6 } scsiAttTgtPortEntry OBJECT-TYPE SYNTAX ScsiAttTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote target port (scsiAttTgtPortIndex) currently attached to a particular initiator port (scsiPortIndex) of a particular SCSI initiator device within a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex, scsiAttTgtPortIndex } ::= { scsiAttTgtPortTable 1 } ScsiAttTgtPortEntry ::= SEQUENCE { scsiAttTgtPortIndex ScsiIndexValue, scsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero, scsiAttTgtPortName ScsiName, scsiAttTgtPortIdentifier ScsiIdentifier } scsiAttTgtPortIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular target currently attached to a particular SCSI initiator port of a particular SCSI initiator device within a particular SCSI instance." ::= { scsiAttTgtPortEntry 1 } scsiAttTgtPortDscTgtIdx OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of the scsiAttTgtPortIndex index variable for the row in the scsiDscTgtTable representing this currently attached target port. If the currently attached target port is not represented in the scsiDscTgtTable, then the value of this object is zero." ::= { scsiAttTgtPortEntry 2 } scsiAttTgtPortName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION " This object contains the name of the attached target port." ::= { scsiAttTgtPortEntry 3 } scsiAttTgtPortIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION " This object contains the identifier of the attached target port." ::= { scsiAttTgtPortEntry 4 } -- Management Objects regarding target type of scsi devices -- scsiTgtDevTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiTgtDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about each local target device." ::= { scsiTarget 1 } scsiTgtDevEntry OBJECT-TYPE SYNTAX ScsiTgtDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular local target device within a particular SCSI instance. " INDEX { scsiInstIndex, scsiDeviceIndex } ::= { scsiTgtDevTable 1 } ScsiTgtDevEntry ::= SEQUENCE { scsiTgtDevNumberOfLUs Gauge32, scsiTgtDeviceStatus INTEGER, scsiTgtDevNonAccessibleLUs Gauge32 } scsiTgtDevNumberOfLUs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of Logical Units accessible via this local target device." ::= { scsiTgtDevEntry 1 } scsiTgtDeviceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), broken(3), readying(4), abnormal(5), nonAddrFailure(6), nonAddrFailReadying(7), nonAddrFailAbnormal(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the status of this SCSI device, summarizing the state of both the addressable devices (i.e., the logical units) and the non-addressable devices within this SCSI device: - unknown(1): This value is used when the status cannot be determined - available(2): All addressable and non-addressable devices within the SCSI device are fully operational (i.e., no logical units have an abnormal status). - broken(3): The SCSI device is not operational and cannot be made operational without external intervention. - readying(4): One or more logical units within the SCSI device are being initialized and access to the SCSI device is temporarily limited (i.e., one or more of the logical unit have a readying status). - abnormal(5): One or more addressable devices within the SCSI device are indicating a status other than available; nevertheless, the SCSI device is operational (i.e., one or more of the logical units have an abnormal status). - nonAddrFailure(6): One or more non-addressable devices within the SCSI device have failed; nevertheless, the SCSI device is operational (i.e., no logical units have an abnormal or readying status). - nonAddrFailReadying(7): One or more non-addressable devices within the SCSI device have failed; nevertheless,one or more logical units within the SCSI device are being initialized and access to the SCSI device is temporarily limited. - nonAddrFailAbnormal(8): One or more non-addressable devices within the SCSI device have failed and one or more addressable devices within the SCSI device are indicating a status other than available however the SCSI device is operational. " REFERENCE "SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { scsiTgtDevEntry 2} scsiTgtDevNonAccessibleLUs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of Logical Units existing but not currently accessible via this local target device." ::= { scsiTgtDevEntry 3 } -- Target Port Table scsiTgtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the local target ports of all the local target devices." ::= { scsiTarget 2 } scsiTgtPortEntry OBJECT-TYPE SYNTAX ScsiTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular local target port of a particular local target device within a particular SCSI instance. " INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex} ::= { scsiTgtPortTable 1 } ScsiTgtPortEntry ::= SEQUENCE { scsiTgtPortName ScsiName, scsiTgtPortIdentifier ScsiIdentifier, scsiTgtPortInCommands Counter32, scsiTgtPortWrittenMegaBytes Counter32, scsiTgtPortReadMegaBytes Counter32, scsiTgtPortHSInCommands Counter64 } scsiTgtPortName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the name of the port assigned for use in the SCSI protocol." ::= { scsiTgtPortEntry 1 } scsiTgtPortIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the identifier of the port in one of the format(s) appropriate for the type of transport." ::= { scsiTgtPortEntry 2 } scsiTgtPortInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received by this target port." ::= { scsiTgtPortEntry 3 } scsiTgtPortWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data written in Megabytes by this target port." ::= { scsiTgtPortEntry 4 } scsiTgtPortReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data read in Megabytes by this target port." ::= { scsiTgtPortEntry 5 } scsiTgtPortHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received. This object provides support for systems that can quickly generate lots of commands because they run at high speed." ::= { scsiTgtPortEntry 6 } scsiRemoteInitiators OBJECT IDENTIFIER ::= { scsiTarget 3 } -- The scsiAuthorizedIntrTable contains the list of remote initiator -- ports that are authorized to be attached specific target ports -- and on which, an administrator would like to keep permanent -- information and long term statistics even when not currently -- attached. scsiAuthorizedIntrTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiAuthorizedIntrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the authorized initiator devices or ports that may attach a target device or port of the local SCSI instance. Statistics are kept for each such authorization; thus, the authorizations should be configured in the manner, which will cause the desired set of statistics to be collected and that will determine the correct LUN map." ::= { scsiRemoteInitiators 1 } scsiAuthorizedIntrEntry OBJECT-TYPE SYNTAX ScsiAuthorizedIntrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote initiator port or remote initiator device that may attach to the local target port or device within a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiAuthIntrTgtPortIndex, scsiAuthIntrIndex } ::= { scsiAuthorizedIntrTable 1 } ScsiAuthorizedIntrEntry ::= SEQUENCE { scsiAuthIntrTgtPortIndex ScsiPortIndexValueOrZero, scsiAuthIntrIndex ScsiIndexValue, scsiAuthIntrDevOrPort ScsiDeviceOrPort, scsiAuthIntrName ScsiName, scsiAuthIntrLunMapIndex ScsiIndexValueOrZero, scsiAuthIntrAttachedTimes Counter32, scsiAuthIntrOutCommands Counter32, scsiAuthIntrReadMegaBytes Counter32, scsiAuthIntrWrittenMegaBytes Counter32, scsiAuthIntrHSOutCommands Counter64, scsiAuthIntrLastCreation TimeStamp, scsiAuthIntrRowStatus RowStatus } scsiAuthIntrTgtPortIndex OBJECT-TYPE SYNTAX ScsiPortIndexValueOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains either the index of the port, or zero to indicate any port, on the particular local target device." ::= { scsiAuthorizedIntrEntry 1 } scsiAuthIntrIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an arbitrary integer used to uniquely identify a SCSI initiator which is authorized to attach to a particular local target device or port of a particular SCSI instance." ::= { scsiAuthorizedIntrEntry 2 } scsiAuthIntrDevOrPort OBJECT-TYPE SYNTAX ScsiDeviceOrPort MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this entry refers to a remote initiator port or a device. A value of device(1) means that the authorized remote initiator is a device and includes all its ports. A value of port(2) means that the authorized remote initiator is a port." ::= { scsiAuthorizedIntrEntry 3 } scsiAuthIntrName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the name of the remote initiator device or port authorized by this row." ::= { scsiAuthorizedIntrEntry 4 } scsiAuthIntrLunMapIndex OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the set of entries in the scsiLunMapTable for which scsiLunMapIndex has the same value as the value of this object. The identified set of entries constitute the LUN map to be used for accessing logical units when the remote initiator port or device corresponding to this entry is attached to any local target port or device corresponding to this entry. Note that this object has a value of zero if this entry should use the default LUN map." ::= { scsiAuthorizedIntrEntry 5 } scsiAuthIntrAttachedTimes OBJECT-TYPE SYNTAX Counter32 UNITS "Times" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times that this remote initiator has transitioned from unattached to attached to this local target device or port." ::= { scsiAuthorizedIntrEntry 6 } scsiAuthIntrOutCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of commands that the remote initiator corresponding to this entry has sent to the local target device or port corresponding to this entry." ::= { scsiAuthorizedIntrEntry 7 } scsiAuthIntrReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of data in Megabytes that the remote initiator corresponding to this entry has read from the local target device or port corresponding to this entry." ::= { scsiAuthorizedIntrEntry 8 } scsiAuthIntrWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of data in Megabytes that the remote initiator corresponding to this entry has written from the local target device or port corresponding to this entry." ::= { scsiAuthorizedIntrEntry 9} scsiAuthIntrHSOutCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by the remote initiator corresponding to this entry to the local target device or port corresponding to this entry. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { scsiAuthorizedIntrEntry 10 } scsiAuthIntrLastCreation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of sysUpTime when this row was last created." ::= { scsiAuthorizedIntrEntry 11 } scsiAuthIntrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows an administrator to create or delete this entry." ::= { scsiAuthorizedIntrEntry 12 } scsiAttIntrPrtTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiAttIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote initiator ports that are currently attached to a local target port of all local devices within all SCSI instances." ::= { scsiRemoteInitiators 2 } scsiAttIntrPrtEntry OBJECT-TYPE SYNTAX ScsiAttIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote initiator currently attached to a particular local target port of a particular target device of a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex, scsiAttIntrPrtIdx } ::= { scsiAttIntrPrtTable 1 } ScsiAttIntrPrtEntry ::= SEQUENCE { scsiAttIntrPrtIdx ScsiIndexValue, scsiAttIntrPrtAuthIntrIdx ScsiIndexValueOrZero, scsiAttIntrPrtName ScsiName, scsiAttIntrPrtId ScsiIdentifier } scsiAttIntrPrtIdx OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object represents an arbitrary integer used to uniquely identify a particular attached remote initiator port to a particular target port within a particular SCSI target device within a particular SCSI instance." ::= { scsiAttIntrPrtEntry 1 } scsiAttIntrPrtAuthIntrIdx OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the corresponding index in the scsiAuthorizedIntrTable for this current attached remote initiator or zero if this remote attached initiator is not configured in that table." ::= { scsiAttIntrPrtEntry 2 } scsiAttIntrPrtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the name of the remote initiator attached to this local target port." ::= { scsiAttIntrPrtEntry 3 } scsiAttIntrPrtId OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the identifier of the remote initiator attached to this local target port." ::= { scsiAttIntrPrtEntry 4 } ------------------- Managed Objects regarding logical units -------- scsiLuTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiLuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the logical units exposed by local target devices." ::= { scsiLogicalUnit 1 } scsiLuEntry OBJECT-TYPE SYNTAX ScsiLuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) contains information applicable to a particular logical unit of a particular local target device within a particular SCSI instance. " INDEX { scsiInstIndex, scsiDeviceIndex, scsiLuIndex} ::= { scsiLuTable 1 } ScsiLuEntry ::= SEQUENCE { scsiLuIndex ScsiIndexValue, scsiLuDefaultLun ScsiLUNOrZero, scsiLuWwnName ScsiNameIdOrZero, scsiLuVendorId SnmpAdminString, scsiLuProductId SnmpAdminString, scsiLuRevisionId SnmpAdminString, scsiLuPeripheralType Unsigned32, scsiLuStatus INTEGER, scsiLuState BITS, scsiLuInCommands Counter32, scsiLuReadMegaBytes Counter32, scsiLuWrittenMegaBytes Counter32, scsiLuInResets Counter32, scsiLuOutQueueFullStatus Counter32, scsiLuHSInCommands Counter64 } scsiLuIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object represents an arbitrary integer used to uniquely identify a particular logical unit within a particular SCSI target device within a particular SCSI instance." ::= { scsiLuEntry 1 } scsiLuDefaultLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the default Logical Unit Number (LUN) for this logical unit; it is the LUN that will appear to an initiator that was not configured to see another LUN. Note that this object will have a zero-length string if this Logical Unit does not have a default LUN." ::= { scsiLuEntry 2 } scsiLuWwnName OBJECT-TYPE SYNTAX ScsiNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the World-Wide Name of this LU. A value of zero has no meaning in this case." ::= { scsiLuEntry 3 } scsiLuVendorId OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents a string identifying the vendor of this LU according to the value in SCSI device page." ::= { scsiLuEntry 4 } scsiLuProductId OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents a string identifying the product for this LU according to the value in SCSI device page." ::= { scsiLuEntry 5 } scsiLuRevisionId OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents a string defining the product revision of this LU according to the value in SCSI device page." ::= { scsiLuEntry 6 } scsiLuPeripheralType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the value returned to SCSI query VPD page 83. It can be: direct-access device, sequential-access device, printer, communication device and so on. The values that can be returned here are defined in SCSI Primary Commands -2." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), T10 Project 1236- D, Revision 20, 18 July 2001 [16]" ::= { scsiLuEntry 7 } scsiLuStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), notAvailable(3), broken(4), readying(5), abnormal(6) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the status of this logical unit: - unknown(1): The status of this logical unit cannot be determined. - available(2): The logical unit is fully operational (i.e., accepts media access SCSI commands and has no state information to report). - notAvailable(3): The logical unit is capable of being supported but not available (i.e., no logical unit is currently present or the logical unit is present but not configured for use). - broken(4): The logical unit has failed and cannot respond to SCSI commands. - readying(5): The logical unit is being initialized and access is temporarily limited. - abnormal(6): The logical unit has state information available that indicates it is operating with limits. The scsiLuState indicates what those limits are. " REFERENCE " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { scsiLuEntry 8 } scsiLuState OBJECT-TYPE SYNTAX BITS { dataLost(0), dynamicReconfigurationInProgress(1), exposed(2), fractionallyExposed(3), partiallyExposed(4), protectedRebuild(5), protectionDisabled(6), rebuild(7), recalculate(8), spareInUse(9), verifyInProgress(10) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the state of a logical unit and its meaning is according the bit position: 0 Data lost: Within the logical unit data has been lost. 1 Dynamic reconfiguration in progress: The logical unit is being reconfigured. In this state all data is still protected. 2 Exposed: Within the logical unit data is not protected. In this state all data is still valid, however, loss of data/data-availability is unavoidable in the event of a failure. 3 Fractionally exposed: Within the logical unit part of the data is not protected. In this state all data is still valid, however, a failure may cause a loss of data or a loss of data availability. 4 Partially exposed: Within the logical unit one or more underlying storage devices have failed. In this state all data is still protected. 5 Protected rebuild: The logical unit is in the process of a rebuild operation. In this state all data is protected. 6 Protection disabled: Within the logical unit the data protection method has been disabled. In this state all data is still valid, however, however, loss of data/data-availability is unavoidable in the event of a failure. 7 Rebuild: The data protection method is in the process of rebuilding data. In this state data is not protected. 8 Recalculate: The logical unit is in the process of a recalculate operation. 9 Spare in use: Within the logical unit a storage device in full or part being used to store data. In this state all data is still protected. 10 Verify in progress: Within the logical unit data is being verified." REFERENCE " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { scsiLuEntry 9 } scsiLuInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received by this logical unit." ::= { scsiLuEntry 10 } scsiLuReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data in Megabytes read from this logical unit." ::= { scsiLuEntry 11 } scsiLuWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data in Megabytes written by this logical unit." ::= { scsiLuEntry 12 } scsiLuInResets OBJECT-TYPE SYNTAX Counter32 UNITS "resets" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of resets received by this logical unit." ::= { scsiLuEntry 13 } scsiLuOutQueueFullStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of queue full statuses received by this logical unit." ::= { scsiLuEntry 14 } scsiLuHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received by this logical unit. This object provides support for systems that can quickly generate lots of commands because they run at high speed." ::= { scsiLuEntry 15 } ----------------------- Logical Unit Identifier Table -------------- scsiLuIdTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiLuIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of identifiers for all logical units exposed by local targets device." ::= { scsiLogicalUnit 2 } scsiLuIdEntry OBJECT-TYPE SYNTAX ScsiLuIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular identifier for a particular logical unit of a particular target device within a particular SCSI instance. " INDEX {scsiInstIndex, scsiDeviceIndex, scsiLuIndex, scsiLuIdIndex} ::= { scsiLuIdTable 1 } ScsiLuIdEntry ::= SEQUENCE { scsiLuIdIndex ScsiIndexValue, scsiLuIdCodeSet ScsiIdCodeSet, scsiLuIdAssociation ScsiIdAssociation, scsiLuIdType ScsiIdType, scsiLuIdValue ScsiIdValue } scsiLuIdIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object represents an arbitrary integer used to uniquely identify a particular LU Identifier within a particular logical unit within a particular SCSI target device within a particular SCSI instance." ::= { scsiLuIdEntry 1 } scsiLuIdCodeSet OBJECT-TYPE SYNTAX ScsiIdCodeSet MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the code set in use with this identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 ((SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiLuIdEntry 2 } scsiLuIdAssociation OBJECT-TYPE SYNTAX ScsiIdAssociation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies what the identifier is associated with (e.g, with the addressed physical/logical device or with a particular port). The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiLuIdEntry 3 } scsiLuIdType OBJECT-TYPE SYNTAX ScsiIdType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of the identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiLuIdEntry 4 } scsiLuIdValue OBJECT-TYPE SYNTAX ScsiIdValue MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the actual value of this identifier. The format is defined by the objects scsiLuIdCodeSet, scsiLuIdAssociation, scsiLuIdType. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { scsiLuIdEntry 5 } ----------------------- The LUN Map Table -------------------------- scsiLunMapTable OBJECT-TYPE SYNTAX SEQUENCE OF ScsiLunMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes LUNs additional to the default one. A logical unit may have a different Logical Unit Number for different initiators. This table provides a mapping between a logical unit and a logical unit number." ::= { scsiLogicalUnit 3 } scsiLunMapEntry OBJECT-TYPE SYNTAX ScsiLunMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about the mapping of a particular Logical Unit to a particular LUN. The set of entries which all have the same values of scsiInstIndex, scsiDeviceIndex and scsiLunMapIndex constitute a LUN Map within a particular SCSI instance." INDEX { scsiInstIndex, scsiDeviceIndex, scsiLunMapIndex, scsiLunMapLun} ::= { scsiLunMapTable 1 } ScsiLunMapEntry ::= SEQUENCE { scsiLunMapIndex ScsiIndexValue, scsiLunMapLun ScsiLUNOrZero, scsiLunMapLuIndex ScsiIndexValue, scsiLunMapRowStatus RowStatus } scsiLunMapIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object represents an arbitrary integer used to uniquely identify a particular LunMap within a particular SCSI target device within a particular SCSI instance." ::= { scsiLunMapEntry 1 } scsiLunMapLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Logical Unit Number, to which a logical unit is mapped by this row. A value of zero has no meaning in this case." ::= { scsiLunMapEntry 2 } scsiLunMapLuIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the logical unit for which the value of scsiLuIndex is the same as the value of this object. The identified logical unit is the one mapped to a LUN by this row." ::= { scsiLunMapEntry 3 } scsiLunMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows an administrator to create and delete this entry." ::= { scsiLunMapEntry 4 } -- Notifications -- scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 } scsiNotificationsPrefix OBJECT IDENTIFIER ::= { scsiNotifications 0 } scsiTgtDeviceStatusChanged NOTIFICATION-TYPE OBJECTS { scsiTgtDeviceStatus } STATUS current DESCRIPTION " A notification will be generated for each occurrence of the abnormal status (e.g., if the SCSI target device's current status is abnormal) providing that the SCSI instance's value of scsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period." ::= { scsiNotificationsPrefix 1 } scsiLuStatusChanged NOTIFICATION-TYPE OBJECTS { scsiLuStatus } STATUS current DESCRIPTION " A notification will be generated each time that scsiLuStatus will change providing that the SCSI instance's value of scsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period." ::= { scsiNotificationsPrefix 2 } -- The next part defines the conformance groups in use for SCSI MIB. scsiCompliances OBJECT IDENTIFIER ::= { scsiConformance 1 } scsiCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for compliance to this SCSI MIB. If an implementation can be both a target and an initiator, all groups are mandatory." MODULE -- this module MANDATORY-GROUPS { scsiDeviceGroup } OBJECT scsiInstAlias MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT scsiInstScsiNotificationsEnable MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT scsiDeviceAlias MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." -- Conditionally mandatory groups to be included with -- the mandatory groups when the implementation has -- SCSI target device. GROUP scsiTargetGroup DESCRIPTION "This group is mandatory for all SCSI implementations that have SCSI target devices." GROUP scsiLunMapGroup DESCRIPTION "This group is mandatory for system having the capabilities of mapping local targets and logical units according remote initiators." OBJECT scsiAuthIntrDevOrPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT scsiAuthIntrName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT scsiAuthIntrLunMapIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT scsiAuthIntrRowStatus SYNTAX RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." -- Conditionally mandatory groups to be included with -- the mandatory groups when the implementation has -- SCSI initiator device. GROUP scsiInitiatorGroup DESCRIPTION "This group is mandatory for all SCSI implementations that have SCSI initiator devices." OBJECT scsiIntrDevTgtAccessMode MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." GROUP scsiDiscoveryGroup DESCRIPTION "This group is mandatory for system having the capabilities of discovering remote targets via local initiators." OBJECT scsiLunMapLuIndex MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT scsiLunMapRowStatus SYNTAX RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT scsiDscTgtDevOrPort MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT scsiDscTgtName MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT scsiDscTgtConfigured SYNTAX TruthValue MIN-ACCESS read-only DESCRIPTION "The value of true(1) is not mandatory neither the write access." OBJECT scsiDscTgtRowStatus SYNTAX RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." -- Conditionally mandatory groups to be included with the mandatory -- groups when the implementation can gather statistics. GROUP scsiDeviceStatGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics." -- Conditionally mandatory groups to be included with the mandatory -- groups when the implementation can gather statistics at the SCSI -- initiator side. GROUP scsiInitiatorStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side." GROUP scsiDiscoveryStatsGroup DESCRIPTION "This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators." -- Conditionally mandatory groups to be included with the mandatory -- groups when the implementation can gather statistics at the SCSI -- target side. GROUP scsiTargetStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices." GROUP scsiLunMapStatsGroup DESCRIPTION "This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators." -- Conditionally mandatory groups to be included with the mandatory -- groups when the implementation is running at high speed and can -- gather statistics at the SCSI initiator side. GROUP scsiInitiatorHSStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side and are running at high speed." GROUP scsiDiscoveryHSStatsGroup DESCRIPTION "This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators and are running at high speed." -- Conditionally mandatory groups to be included with the mandatory -- groups when the implementation is running at high speed and can -- gather statistics at the SCSI target side. GROUP scsiTargetHSStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices in high speed system." GROUP scsiLunMapHSStatsGroup DESCRIPTION "This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators in high speed system." ::= { scsiCompliances 1 } scsiGroups OBJECT IDENTIFIER ::= { scsiConformance 2 } scsiDeviceGroup OBJECT-GROUP OBJECTS { scsiInstAlias, scsiInstSoftwareIndex, scsiInstVendorVersion, scsiInstScsiNotificationsEnable, scsiDeviceAlias, scsiDeviceRole, scsiDevicePortNumber, scsiPortRole, scsiPortTrnsptPtr, scsiTrnsptType, scsiTrnsptPointer, scsiTrnsptDevName } STATUS current DESCRIPTION "A collection of objects providing information about SCSI instances, devices and ports." ::= { scsiGroups 1 } scsiInitiatorGroup OBJECT-GROUP OBJECTS { scsiIntrDevTgtAccessMode, scsiIntrPrtName, scsiIntrPrtIdentifier, scsiAttTgtPortDscTgtIdx, scsiAttTgtPortName, scsiAttTgtPortIdentifier } STATUS current DESCRIPTION "This group is relevant for an initiator device and port." ::= { scsiGroups 2 } scsiDiscoveryGroup OBJECT-GROUP OBJECTS { scsiDscTgtDevOrPort, scsiDscTgtName, scsiDscTgtConfigured, scsiDscTgtDiscovered, scsiDscTgtRowStatus, scsiDscTgtLastCreation, scsiDscLunLun, scsiDscLunIdCodeSet, scsiDscLunIdAssociation, scsiDscLunIdType, scsiDscLunIdValue } STATUS current DESCRIPTION "This group is relevant for the discovered targets by an initiator port." ::= { scsiGroups 3 } scsiTargetGroup OBJECT-GROUP OBJECTS { scsiTgtDevNumberOfLUs, scsiTgtDeviceStatus, scsiTgtDevNonAccessibleLUs, scsiTgtPortName, scsiTgtPortIdentifier, scsiAttIntrPrtAuthIntrIdx, scsiAttIntrPrtName, scsiAttIntrPrtId, scsiLuDefaultLun, scsiLuWwnName, scsiLuVendorId, scsiLuProductId, scsiLuRevisionId, scsiLuPeripheralType, scsiLuStatus, scsiLuState, scsiLuIdCodeSet, scsiLuIdAssociation, scsiLuIdType, scsiLuIdValue } STATUS current DESCRIPTION "This group is relevant for a target device and port." ::= { scsiGroups 4 } scsiLunMapGroup OBJECT-GROUP OBJECTS { scsiLunMapLuIndex, scsiLunMapRowStatus, scsiAuthIntrDevOrPort, scsiAuthIntrName, scsiAuthIntrLunMapIndex, scsiAuthIntrLastCreation, scsiAuthIntrRowStatus } STATUS current DESCRIPTION "This group is a collection of attributes regarding the mapping between logical unit number, logical unit and target device." ::= { scsiGroups 5} scsiTargetStatsGroup OBJECT-GROUP OBJECTS { scsiTgtPortInCommands, scsiTgtPortWrittenMegaBytes, scsiTgtPortReadMegaBytes, scsiLuInCommands, scsiLuReadMegaBytes, scsiLuWrittenMegaBytes, scsiLuInResets, scsiLuOutQueueFullStatus } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain targets." ::= { scsiGroups 6} scsiTargetHSStatsGroup OBJECT-GROUP OBJECTS { scsiTgtPortHSInCommands, scsiLuHSInCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain targets." ::= { scsiGroups 7} scsiLunMapStatsGroup OBJECT-GROUP OBJECTS { scsiAuthIntrAttachedTimes, scsiAuthIntrOutCommands, scsiAuthIntrReadMegaBytes, scsiAuthIntrWrittenMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics regarding initiators authorized to attach local logical unit and target device." ::= { scsiGroups 8} scsiLunMapHSStatsGroup OBJECT-GROUP OBJECTS { scsiAuthIntrHSOutCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics regarding initiators authorized to attach local logical unit and target device." ::= { scsiGroups 9} scsiInitiatorStatsGroup OBJECT-GROUP OBJECTS { scsiIntrDevOutResets, scsiIntrPrtOutCommands, scsiIntrPrtWrittenMegaBytes, scsiIntrPrtReadMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain initiators." ::= { scsiGroups 10} scsiInitiatorHSStatsGroup OBJECT-GROUP OBJECTS { scsiIntrPrtHSOutCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain initiators." ::= { scsiGroups 11} scsiDiscoveryStatsGroup OBJECT-GROUP OBJECTS { scsiDscTgtInCommands, scsiDscTgtReadMegaBytes, scsiDscTgtWrittenMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain discovered initiators." ::= { scsiGroups 12} scsiDiscoveryHSStatsGroup OBJECT-GROUP OBJECTS { scsiDscTgtHSInCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain discovered initiators." ::= { scsiGroups 13} scsiDeviceStatGroup OBJECT-GROUP OBJECTS { scsiDeviceResets, scsiPortBusyStatuses } STATUS current DESCRIPTION "A collection of statistics regarding about SCSI devices and ports." ::= { scsiGroups 14 } END