QOS DEFINITIONS ::= BEGIN
    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    VlanIdT, QosTagT, EnableStatusT
        FROM ExaltComm
    radioConfig
        FROM ExaltComProducts;

  QosPriorityT ::= TEXTUAL-CONVENTION
        STATUS             current
        DESCRIPTION         "This MIB variable sets Qos priority, the higher number 
                             the higher priority"
        SYNTAX             INTEGER {
                                     priority0(0),
                                     priority1(1),
                                     priority2(2),
                                     priority3(3)
                            }

  QosModeT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable sets Qos Mode"
        SYNTAX            INTEGER {
                                    disable(0),
                                    qos-mode-802-1p(4),
                                    qos-mode-diffserv(5),
                                    qos-mode-port(6)
                            }

  QosScheduleModeT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable defines available QoS Scheduler modes"
        SYNTAX            INTEGER {
                                    weighted-round-robin(0),
                                    hybrid1-mode-3sp-2wrr-1wrr-0wrr(1),
                                    hybrid2-mode-3sp-2sp-1wrr-0wrr(2),
                                    strict-priority(3)
                            }

  QosCos3WeightT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable defines available weights for Queue 3"
        SYNTAX            INTEGER {
                                    w-8(8),
                                    w-16(16),
                                    w-32(32)
                            }

  QosCos2WeightT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable defines available weights for Queue 2"
        SYNTAX            INTEGER {
                                    w-4(4),
                                    w-8(8),
                                    w-16(16)
                            }

  QosCos1WeightT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable defines available weights for Queue 1"
        SYNTAX            INTEGER {
                                    w-2(2),
                                    w-4(4),
                                    w-8(8)
                            }

  QosCos0WeightT ::= TEXTUAL-CONVENTION
        STATUS            current
        DESCRIPTION       "This MIB variable defines available weights for Queue 0"
        SYNTAX            INTEGER {
                                    w-1(1),
                                    w-2(2),
                                    w-4(4)
                            }

  -- define advSystemConfig here to allow modular inclusion of feature
  -- same definition could exist in other features such as Aggregation that belong 
  -- to advSystemConfig
  advSystemConfig OBJECT-IDENTITY
        STATUS          current
        DESCRIPTION         "This is the device specific advanced configuration section."
        ::= { radioConfig 5 }

  extAirG2QoS OBJECT-IDENTITY
        STATUS          current
        DESCRIPTION         "QOS configuration."
        ::= { advSystemConfig 8 }

    qosDefaultQueue OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The default queue to catch all traffic that don't belong to any queue."
        ::= { extAirG2QoS 1 }

    qosEth1Mode OBJECT-TYPE
        SYNTAX              QosModeT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This setting set the qos mode or disable QoS on ETH1."
        ::= { extAirG2QoS 2 }

    qosEth2Mode OBJECT-TYPE
        SYNTAX              QosModeT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This setting set the qos mode or disable QoS on ETH2."
        ::= { extAirG2QoS 3 }

    qosDiffServList OBJECT-TYPE
        SYNTAX              SEQUENCE OF QosDiffServEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a table of Qos DiffServ value and proiority."
        ::= { extAirG2QoS 4 }

    qosScheduler OBJECT-IDENTITY
        STATUS              current
        DESCRIPTION         "QOS Scheduler configuration."
        ::= { extAirG2QoS 7 }


    qosDiffServEntry OBJECT-TYPE
        SYNTAX              QosDiffServEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is DiffServ table entry."
        INDEX               {
                               diffServValue, diffServPriority, diffServEnable
                            }
        ::= { qosDiffServList 1 }

    QosDiffServEntry ::= SEQUENCE {
        diffServValue   INTEGER,
        diffServPriority  QosPriorityT,
        diffServEnable    EnableStatusT
    }

    diffServValue OBJECT-TYPE
        SYNTAX              Integer32 (0..63)
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the value for the corresponding DiffServ table entry."
        ::= { qosDiffServEntry 1 }

    diffServPriority OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the priority for the corresponding DiffServ table entry."
        ::= { qosDiffServEntry 2 }

    diffServEnable OBJECT-TYPE
        SYNTAX              EnableStatusT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the status for the corresponding  DiffServ table entry."
        ::= { qosDiffServEntry 3 }

    qosPortETH1Conf OBJECT IDENTIFIER ::= { extAirG2QoS 5 }

    qosEth1m802dot1pList OBJECT-TYPE
        SYNTAX              SEQUENCE OF QosEth1m802dot1pEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a table of Qos 802.1p tag and proiority."
        ::= { qosPortETH1Conf 1 }

    qosEth1m802dot1pEntry OBJECT-TYPE
        SYNTAX              QosEth1m802dot1pEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a 802.1p table entry."
        INDEX               {
                               tagEth1Priority, tagEth1Status
                            }
        ::= { qosEth1m802dot1pList 1 }

    QosEth1m802dot1pEntry ::= SEQUENCE {
        tagEth1Priority
            QosPriorityT,
        tagEth1Status
            EnableStatusT
    }

    tagEth1Priority OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the priority for the corresponding ETH1 802.1p tag entry."
        ::= { qosEth1m802dot1pEntry 1 }

    tagEth1Status OBJECT-TYPE
        SYNTAX              EnableStatusT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the status for the corresponding ETH1 802.1p tag entry."
        ::= { qosEth1m802dot1pEntry 2 }

    qosEth1PortList OBJECT-TYPE
        SYNTAX              SEQUENCE OF QosEth1PortEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a table of Qos Port mode."
        ::= { qosPortETH1Conf 2 }

    qosEth1PortEntry OBJECT-TYPE
        SYNTAX              QosEth1PortEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a Port mode table entry."
        INDEX               {
                               portEth1Priority, portEth1Status
                            }
        ::= { qosEth1PortList 1 }

    QosEth1PortEntry ::= SEQUENCE {
        portEth1Priority
            QosPriorityT,
        portEth1Status
            EnableStatusT
    }

    portEth1Priority OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the priority for the corresponding ETH1 Port mode entry."
        ::= { qosEth1PortEntry 1 }

    portEth1Status OBJECT-TYPE
        SYNTAX              EnableStatusT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the status for the corresponding ETH1 Port mode entry."
        ::= { qosEth1PortEntry 2 }

    qosPortETH2Conf OBJECT IDENTIFIER ::= { extAirG2QoS 6 }

    qosEth2m802dot1pList OBJECT-TYPE
        SYNTAX              SEQUENCE OF QosEth2m802dot1pEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a table of Qos 802.1p tag and proiority."
        ::= { qosPortETH2Conf 1 }

    qosEth2m802dot1pEntry OBJECT-TYPE
        SYNTAX              QosEth2m802dot1pEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a 802.1p table entry."
        INDEX               {
                               tagEth2Priority, tagEth2Status
                            }
        ::= { qosEth2m802dot1pList 1 }

    QosEth2m802dot1pEntry ::= SEQUENCE {
        tagEth2Priority
            QosPriorityT,
        tagEth2Status
            EnableStatusT
    }

    tagEth2Priority OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the priority for the corresponding ETH2 802.1p tag entry."
        ::= { qosEth2m802dot1pEntry 1 }

    tagEth2Status OBJECT-TYPE
        SYNTAX              EnableStatusT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the status for the corresponding ETH2 802.1p tag entry."
        ::= { qosEth2m802dot1pEntry 2 }

    qosEth2PortList OBJECT-TYPE
        SYNTAX              SEQUENCE OF QosEth2PortEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a table of Qos Port mode."
        ::= { qosPortETH2Conf 2 }


    qosEth2PortEntry OBJECT-TYPE
        SYNTAX              QosEth2PortEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         "This is a ETH2 Port mode table entry."
        INDEX               {
                               portEth2Priority, portEth2Status
                            }
        ::= { qosEth2PortList 1 }

    QosEth2PortEntry ::= SEQUENCE {
        portEth2Priority
            QosPriorityT,
        portEth2Status
            EnableStatusT
    }

    portEth2Priority OBJECT-TYPE
        SYNTAX              QosPriorityT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the priority for the corresponding ETH2 Port mode entry."
        ::= { qosEth2PortEntry 1 }

    portEth2Status OBJECT-TYPE
        SYNTAX              EnableStatusT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This is the status for the corresponding ETH2 Port mode entry."
        ::= { qosEth2PortEntry 2 }

    qosScheduleMode OBJECT-TYPE
        SYNTAX              QosScheduleModeT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The QoS queues scheduler mode"
        ::= { qosScheduler 1 }

    qosCos3Weight OBJECT-TYPE
        SYNTAX              QosCos3WeightT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "QoS queue 3 weight."
        ::= { qosScheduler 2 }

    qosCos2Weight OBJECT-TYPE
        SYNTAX              QosCos2WeightT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "QoS queue 2 weight."
        ::= { qosScheduler 3 }

    qosCos1Weight OBJECT-TYPE
        SYNTAX              QosCos1WeightT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "QoS queue 1 weight."
        ::= { qosScheduler 4 }

    qosCos0Weight OBJECT-TYPE
        SYNTAX              QosCos0WeightT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "QoS queue 0 weight."
        ::= { qosScheduler 5 }


    commitQosSettings OBJECT-TYPE
        SYNTAX              DisplayString
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This command allows saving or clear configuration.
                            Options are: save, clear, correspondingly saving changes to
                            configuration to the persistent storage or clearing unsaved changes."
        ::= { extAirG2QoS 1000 }
END