-- MIB File: BROCADE-MPLS-MIB.mib -- ********************************************************************* -- BROCADE-MPLS-MIB.mib: Extreme MPLS MIB -- -- Copyright (c) 2018 Extreme Networks, Inc. -- All rights reserved. -- -- ********************************************************************* BROCADE-MPLS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Counter64, IpAddress, Integer32 FROM SNMPv2-SMI DisplayString, TimeStamp, RowStatus FROM SNMPv2-TC TruthValue,TEXTUAL-CONVENTION FROM SNMPv2-TC MplsTunnelAffinity FROM MPLS-TC-STD-MIB bcsiModules FROM Brocade-REG-MIB ; brocadeMplsMIB MODULE-IDENTITY LAST-UPDATED "201805291200Z" -- May 29, 2018 12:00pm ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "Postal: Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 USA Phone: +1 408 579-2800 E-mail: support@extremenetworks.com WWW: http://www.extremenetworks.com" DESCRIPTION "This is Extreme's proprietary MIB module for Multi-Protocol Label Switched Paths. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved. This Extreme Networks SNMP Management Information Base Specification embodies Extreme Networks' confidential and proprietary intellectual property. Extreme Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Extreme Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201805291200Z" -- May 29, 2018 12:00pm DESCRIPTION "Updated ORGANIZATION and CONTACT-INFO with Extreme Networks" REVISION "201609280000Z" -- 28 September 2016 DESCRIPTION "Moved the OIDs for this MIB from foundry to Extreme (bcsi) tree." REVISION "201305290000Z" -- 29 May 2013 DESCRIPTION "Changed mplsLspName and mplsLspPathName size to 64 from 32 and 16 respectively." REVISION "201006020000Z" -- 04 June 2010 DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." REVISION "200802060000Z" -- Feb 6, 2008 DESCRIPTION "Add support for proprietary extensions to the VLL and VPLS mib." ::= { bcsiModules 10 } bcsiMplsNotifications OBJECT IDENTIFIER ::= { brocadeMplsMIB 0 } bcsiMplsObjects OBJECT IDENTIFIER ::= { brocadeMplsMIB 1 } bcsiMplsConformance OBJECT IDENTIFIER ::= { brocadeMplsMIB 2 } -- Textual Conventions ClassOfService ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Class Of Service (COS) value of a given management entity. Value 255 means that COS is not explicitly configured. Valid COS values are between 0 and 7." SYNTAX Unsigned32(0..7 | 255) -- Objects bcsiMplsInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 1 } bcsiMplsLspInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 2 } bcsiMplsVllInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 3 } bcsiMplsVplsInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 4 } bcsiMplsVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "MPLS version number." ::= { bcsiMplsInfo 1 } -- -- Administrative groups, also known as resource classes or link colors, -- allows MPLS-enabled interfaces to be assigned to various classes. -- For ease of use to a user, a groupname can be associated to a single or -- multiple administrative group. -- Up to 32 administrative groups can be configured on the device. -- bcsiMplsAdminGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiMplsAdminGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of administrative groups (by ID) that have a configured group name." ::= { bcsiMplsInfo 2 } bcsiMplsAdminGroupEntry OBJECT-TYPE SYNTAX BcsiMplsAdminGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an administrative group entry." INDEX { bcsiMplsAdminGroupId } ::= { bcsiMplsAdminGroupTable 1 } BcsiMplsAdminGroupEntry ::= SEQUENCE { bcsiMplsAdminGroupId Unsigned32, bcsiMplsAdminGroupName DisplayString, bcsiMplsAdminGroupRowStatus RowStatus } bcsiMplsAdminGroupId OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the administrative group ID in 1-based. The end user of this object must convert this to 0-based since this maps to the bit position in the constraint-based link selection." ::= { bcsiMplsAdminGroupEntry 1 } bcsiMplsAdminGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The group name that this administrative group is associated with." ::= { bcsiMplsAdminGroupEntry 2 } bcsiMplsAdminGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of an entry. Note: Set request to this table is not supported in this release. Always returns 'active' for the existing entries." ::= { bcsiMplsAdminGroupEntry 3 } -- -- MPLS-enabled Interface Table -- bcsiMplsInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiMplsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of MPLS-enabled Interfaces." ::= { bcsiMplsInfo 3 } bcsiMplsInterfaceEntry OBJECT-TYPE SYNTAX BcsiMplsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an MPLS interface entry." INDEX { bcsiMplsInterfaceIndex } ::= { bcsiMplsInterfaceTable 1 } BcsiMplsInterfaceEntry::= SEQUENCE { bcsiMplsInterfaceIndex Unsigned32, bcsiMplsInterfaceAdminGroup MplsTunnelAffinity, bcsiMplsInterfaceRowStatus RowStatus } bcsiMplsInterfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the MPLS-enabled port or VE interface." ::= { bcsiMplsInterfaceEntry 1 } bcsiMplsInterfaceAdminGroup OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies which administrative groups this MPLS-enabled interface belongs to." ::= { bcsiMplsInterfaceEntry 2 } bcsiMplsInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of an entry. Note: Set request to this table is not supported in this release. Always returns 'active' for the existing entries." ::= { bcsiMplsInterfaceEntry 3 } bcsiMplsConfiguredLsps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of configured LSPs. Sum of RSVP and static configured LSPs. DEPRECATED BY mplsTunnelConfigured IN rfc3812-MPLS-TE-STD-MIB." ::= { bcsiMplsLspInfo 1 } bcsiMplsActiveLsps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of active LSPs. Sum of RSVP, LDP and static LSPs. DEPRECATED BY mplsTunnelActive IN rfc3812-MPLS-TE-STD-MIB." ::= { bcsiMplsLspInfo 2 } -- -- MPLS LSP Table -- bcsiMplsLspTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Configured Label Switched Paths." ::= { bcsiMplsLspInfo 3 } bcsiMplsLspEntry OBJECT-TYPE SYNTAX BcsiMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a particular Label Switched Path." INDEX { bcsiMplsLspSignalingProto, bcsiMplsLspIndex } ::= { bcsiMplsLspTable 1 } BcsiMplsLspEntry ::= SEQUENCE { bcsiMplsLspSignalingProto INTEGER, bcsiMplsLspIndex Unsigned32, bcsiMplsLspName DisplayString, bcsiMplsLspState INTEGER, bcsiMplsLspPackets Counter64, bcsiMplsLspAge TimeStamp, bcsiMplsLspTimeUp TimeStamp, bcsiMplsLspPrimaryTimeUp TimeStamp, bcsiMplsLspTransitions Counter32, bcsiMplsLspLastTransition TimeStamp, bcsiMplsLspFrom IpAddress, bcsiMplsLspTo IpAddress, bcsiMplsLspPathName DisplayString, bcsiMplsLspPathType INTEGER, bcsiMplsLspAdaptive TruthValue, bcsiMplsLspBfdSessionId Unsigned32, bcsiMplsLspReoptimizeTimer Unsigned32, bcsiMplsLspCoS ClassOfService, bcsiMplsLspHopLimit Unsigned32, bcsiMplsLspCspf INTEGER, bcsiMplsLspCspfTieBreaker INTEGER, bcsiMplsLspFrrMode INTEGER, bcsiMplsLspFrrSetupPriority Unsigned32, bcsiMplsLspFrrHoldingPriority Unsigned32, bcsiMplsLspFrrHopLimit Unsigned32, bcsiMplsLspFrrBandwidth Unsigned32, bcsiMplsLspFrrAdmGrpIncludeAny MplsTunnelAffinity, bcsiMplsLspFrrAdmGrpIncludeAll MplsTunnelAffinity, bcsiMplsLspFrrAdmGrpExcludeAny MplsTunnelAffinity, bcsiMplsLspPathSelectMode INTEGER, bcsiMplsLspPathSelectPathname DisplayString, bcsiMplsLspPathSelectRevertTimer Unsigned32, bcsiMplsLspShortcutOspfAllowed TruthValue, bcsiMplsLspShortcutIsisAllowed TruthValue, bcsiMplsLspShortcutIsisLevel INTEGER, bcsiMplsLspShortcutIsisAnnounce TruthValue, bcsiMplsLspShortcutIsisAnnounceMetric Integer32, bcsiMplsLspShortcutIsisRelativeMetric Integer32 } bcsiMplsLspSignalingProto OBJECT-TYPE SYNTAX INTEGER { ldp(1), rsvp(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS signaling protocol used by this LSP." ::= { bcsiMplsLspEntry 1 } bcsiMplsLspIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of the LSP in the system for a given signaling protocol." ::= { bcsiMplsLspEntry 2 } bcsiMplsLspName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the Label Switched Path." ::= { bcsiMplsLspEntry 3 } bcsiMplsLspState OBJECT-TYPE SYNTAX INTEGER { unknown(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the LSP." ::= { bcsiMplsLspEntry 4 } bcsiMplsLspPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of egress Layer-3 VPN and IPoMPLS packets meeting the in-label and tunnel criteria." ::= { bcsiMplsLspEntry 5 } bcsiMplsLspAge OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The age, since creation of this LSP in 10-millisecond periods." ::= { bcsiMplsLspEntry 6 } bcsiMplsLspTimeUp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP has been operational. The percentage up time can be determined by computing (bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %)." ::= { bcsiMplsLspEntry 7 } bcsiMplsLspPrimaryTimeUp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP's primary path has been operational. The percentage contribution of the primary path to the operational time is given by (bcsiMplsLspPrimaryTimeUp/bcsiMplsLspTimeUp * 100) %." ::= { bcsiMplsLspEntry 8 } bcsiMplsLspTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of state transitions (up -> down and down -> up) this LSP has undergone." ::= { bcsiMplsLspEntry 9 } bcsiMplsLspLastTransition OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time in 10-millisecond units since the last transition occurred on this LSP." ::= { bcsiMplsLspEntry 10 } bcsiMplsLspFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Source IP address of this LSP." ::= { bcsiMplsLspEntry 11 } bcsiMplsLspTo OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Destination IP address of this LSP." ::= { bcsiMplsLspEntry 12 } bcsiMplsLspPathName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in bcsiMplsLspEntry are meaningless." ::= { bcsiMplsLspEntry 13 } bcsiMplsLspPathType OBJECT-TYPE SYNTAX INTEGER { other(1), primary(2), standby(3), secondary(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless bcsiMplsLspPathName is not empty" ::= { bcsiMplsLspEntry 14 } bcsiMplsLspAdaptive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the LSP supports adaptive mechanism or not." ::= { bcsiMplsLspEntry 15 } bcsiMplsLspBfdSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BFD session ID associated to this LSP. Zero indicates there is no BFD session for this LSP. Non-zero value is an index to an entry in the bfdSessTable" ::= { bcsiMplsLspEntry 16 } bcsiMplsLspReoptimizeTimer OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 300..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds from the beginning of one reoptimization attempt to the beginning of the next attempt." ::= { bcsiMplsLspEntry 17 } bcsiMplsLspCoS OBJECT-TYPE SYNTAX ClassOfService MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service for this LSP." ::= { bcsiMplsLspEntry 18 } bcsiMplsLspHopLimit OBJECT-TYPE SYNTAX Unsigned32 ( 0..255 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of hops this LSP can traverse." ::= { bcsiMplsLspEntry 19 } bcsiMplsLspCspf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if CSPF path calculation is enabled on this LSP." ::= { bcsiMplsLspEntry 20 } bcsiMplsLspCspfTieBreaker OBJECT-TYPE SYNTAX INTEGER { random(1), leastFill(2), mostFill(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tie-breaker to use for selecting CSPF equal-cost paths. The value of this variable is meaningless if the bcsiMplsLspCspf is 'disabled'." ::= { bcsiMplsLspEntry 21 } bcsiMplsLspFrrMode OBJECT-TYPE SYNTAX INTEGER { none(1), detour(2), facility(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which protection method is to be used for Fast Reroute. 'detour' means one-to-one backup and 'facility' for facility backup." ::= { bcsiMplsLspEntry 22 } bcsiMplsLspFrrSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The setup priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 23 } bcsiMplsLspFrrHoldingPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The hold priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 24 } bcsiMplsLspFrrHopLimit OBJECT-TYPE SYNTAX Unsigned32 ( 0..255 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The hop limit for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 25 } bcsiMplsLspFrrBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth constraint for MPLS Fast Reroute. The value 0 means that the detour route uses a best-effort value for bandwidth. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 26 } bcsiMplsLspFrrAdmGrpIncludeAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative group setting that the device includes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 27 } bcsiMplsLspFrrAdmGrpIncludeAll OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative group setting that an interface must be a member of to be considered in a detour route for the LSP. Any interface that is not a member of all the groups is eliminated from consideration. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 28 } bcsiMplsLspFrrAdmGrpExcludeAny OBJECT-TYPE SYNTAX MplsTunnelAffinity MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative group setting that the device excludes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'." ::= { bcsiMplsLspEntry 29 } bcsiMplsLspPathSelectMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2), unconditional(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the path selection mode to use. Auto-select is the default mode. I this mode, the primary path is always selected to carry traffic when the primary path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For manual-select, traffic is switched to a user- selected path specified in bcsiMplsLspPathSelectPathname after the selected path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For unconditional-select, traffic is switched to and stays on the selected path regardless of the path's condition even if it is in a failure state." ::= { bcsiMplsLspEntry 30 } bcsiMplsLspPathSelectPathname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user-selected pathname when the bcsiMplsLspPathSelectMode is either 'manual' or 'unconditional'." ::= { bcsiMplsLspEntry 31 } bcsiMplsLspPathSelectRevertTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds to wait after the primary or selected path comes up before traffic reverts to that path. A value of 0 indicates that it will switch immediately after the current working path goes down." ::= { bcsiMplsLspEntry 32 } bcsiMplsLspShortcutOspfAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that this LSP allows shortcut between nodes in an AS. OSPF includes the LSP in its SPF calculation." ::= { bcsiMplsLspEntry 33 } bcsiMplsLspShortcutIsisAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that this LSP allows shortcut through the network to a destination based on the path's cost (metric). Traffic is forwarded through this LSP to destinations within the IS-IS routing domain. IS-IS includes the LSP in its SPF calculation." ::= { bcsiMplsLspEntry 34 } bcsiMplsLspShortcutIsisLevel OBJECT-TYPE SYNTAX INTEGER { level1(1), level2(2), level1and2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the level of IS-IS routing enabled on the device. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'." ::= { bcsiMplsLspEntry 35 } bcsiMplsLspShortcutIsisAnnounce OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that this IS-IS shortcut will be announced or advertised. The metric to announce is specified by bcsiMplsLspShortcutIsisAnnounceMetric. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'." ::= { bcsiMplsLspEntry 36 } bcsiMplsLspShortcutIsisAnnounceMetric OBJECT-TYPE SYNTAX Integer32 (1..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the metric value to announce for this shortcut. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10." ::= { bcsiMplsLspEntry 37 } bcsiMplsLspShortcutIsisRelativeMetric OBJECT-TYPE SYNTAX Integer32 (-16777215..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the relative metric used to compute the LSP cost when announce is not enabled. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'." ::= { bcsiMplsLspEntry 38 } -- definition of MPLS traps -- bcsiMplsLspUpNotification NOTIFICATION-TYPE OBJECTS { bcsiMplsLspName, bcsiMplsLspPathName } -- LspPath STATUS current DESCRIPTION "An bcsiMplsLspUpNotification trap signifies that the specified LSP is up. The current active path for the LSP is bcsiMplsLspPathName." --#TYPE "Foundry Trap: MPLS LSP Up" --#SUMMARY "LSP %s using path %s is up." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { bcsiMplsNotifications 1 } bcsiMplsLspDownNotification NOTIFICATION-TYPE OBJECTS { bcsiMplsLspName, bcsiMplsLspPathName } -- LspPath STATUS current DESCRIPTION "An bcsiMplsLspDownNotification trap signifies that the specified LSP is down, because the current active path bcsiMplsLspPathName went down." --#TYPE "Foundry Trap: MPLS LSP Down" --#SUMMARY "LSP %s using path %s is down." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { bcsiMplsNotifications 2 } bcsiMplsLspChangeNotification NOTIFICATION-TYPE OBJECTS { bcsiMplsLspName, bcsiMplsLspPathName } -- LspPath STATUS current DESCRIPTION "An bcsiMplsLspChangeNotification trap signifies that the the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over" --#TYPE "Foundry Trap: MPLS LSP Change" --#SUMMARY "LSP %s switches to new active path %s." --#ARGUMENTS { 0, 1 } --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= { bcsiMplsNotifications 3 } END