-- MIB File: BROCADE-OPTICAL-MONITORING-MIB.mib -- ********************************************************************* -- BROCADE-OPTICAL-MONITORING-MIB.mib: Extreme Optical Monitoring MIB -- -- Copyright (c) 2018 Extreme Networks, Inc. -- All rights reserved. -- -- ********************************************************************* BROCADE-OPTICAL-MONITORING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB bcsiModules FROM Brocade-REG-MIB ; brocadeOpticalMonitoringMIB MODULE-IDENTITY LAST-UPDATED "201909230000Z" -- Sep 23, 2019 ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "Postal: Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 USA Phone: +1 408 579-2800 E-mail: support@extremenetworks.com WWW: http://www.extremenetworks.com" DESCRIPTION "This MIB module supports monitoring of port optics for parameters like, temperature, Tx Power, Rx Power, Tx Bias Current, etc.,." REVISION "201909230000Z" -- Sep 23, 2019 DESCRIPTION "Added bcsiIfMediaInfoTable" REVISION "201805291200Z" -- May 29, 2018 DESCRIPTION "Updated ORGANIZATION and CONTACT-INFO with Extreme Networks" REVISION "201611230000Z" DESCRIPTION "Added support for bcsiOptMonInfoTable." REVISION "201609280000Z" DESCRIPTION "Initial version of this MIB module." ::= { bcsiModules 8 } bcsiOptMonNotifications OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 0 } bcsiOptMonObjects OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 1 } bcsiOptMonConformance OBJECT IDENTIFIER ::= { brocadeOpticalMonitoringMIB 2 } -- Optical Parameters Table per lane for a 40G SR4 and LR4, -- 100G LR4 and LR10 optics. bcsiOptMonLaneTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiOptMonLaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the instrumented parameters of all lanes within a 40G Optic of type SR4 and LR4, 100G optic of type LR4 and LR10. LR4 and SR4 have 4 lanes per optic, LR10 has 10 lanes per optic." REFERENCE "ITU recommendations G.783, G.784, G.953" ::= { bcsiOptMonObjects 1 } bcsiOptMonLaneEntry OBJECT-TYPE SYNTAX BcsiOptMonLaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table." INDEX { ifIndex, bcsiOptMonLaneNum } ::= { bcsiOptMonLaneTable 1 } BcsiOptMonLaneEntry ::= SEQUENCE { bcsiOptMonLaneNum Unsigned32, bcsiOptMonLaneTemperature SnmpAdminString, bcsiOptMonLaneTxPowerStatus INTEGER, bcsiOptMonLaneTxPower SnmpAdminString, bcsiOptMonLaneTxPowerVal Unsigned32, bcsiOptMonLaneRxPowerStatus INTEGER, bcsiOptMonLaneRxPower SnmpAdminString, bcsiOptMonLaneRxPowerVal Unsigned32, bcsiOptMonLaneTxBiasCurrent SnmpAdminString } bcsiOptMonLaneNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The lane number of this 40G or 100G optic. LR4 and SR4 have 4 lanes per optic. LR10 has 10 lanes per optic." ::= { bcsiOptMonLaneEntry 1 } bcsiOptMonLaneTemperature OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning." ::= { bcsiOptMonLaneEntry 2 } bcsiOptMonLaneTxPowerStatus OBJECT-TYPE SYNTAX INTEGER { notSupported(1), notApplicable(2), highAlarm(3), highWarn(4), normal(5), lowWarn(6), lowAlarm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the status of the transmitter optical signal power for the lane in the interface, indicating whether this is normal or an alarm is present." ::= { bcsiOptMonLaneEntry 3 } bcsiOptMonLaneTxPower OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm." ::= { bcsiOptMonLaneEntry 4 } bcsiOptMonLaneTxPowerVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "microWatt" MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter optical signal power for the lane in the interface, measured in microWatt." ::= { bcsiOptMonLaneEntry 5 } bcsiOptMonLaneRxPowerStatus OBJECT-TYPE SYNTAX INTEGER { notSupported(1), notApplicable(2), highAlarm(3), highWarn(4), normal(5), lowWarn(6), lowAlarm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the status of the receiver optical signal power for the lane in the interface, indicating whether this is normal or an alarm is present." ::= { bcsiOptMonLaneEntry 6 } bcsiOptMonLaneRxPower OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm." ::= { bcsiOptMonLaneEntry 7 } bcsiOptMonLaneRxPowerVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "microWatt" MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the receiver optical signal power for the lane in the interface, measured in microWatt." ::= { bcsiOptMonLaneEntry 8 } bcsiOptMonLaneTxBiasCurrent OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm." ::= { bcsiOptMonLaneEntry 9 } -- Optical Table for module level optical parameters like Temperature, Tx Power, -- Rx Power and Tx Bias Current. bcsiOptMonInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiOptMonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the instrumented parameters of all optical interfaces." REFERENCE "ITU recommendations G.783, G.784, G.953" ::= { bcsiOptMonObjects 2} bcsiOptMonInfoEntry OBJECT-TYPE SYNTAX BcsiOptMonInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table." INDEX { ifIndex } ::= { bcsiOptMonInfoTable 1 } BcsiOptMonInfoEntry ::= SEQUENCE { bcsiOptMonTemperature DisplayString, bcsiOptMonTxPowerStatus INTEGER, bcsiOptMonTxPower SnmpAdminString, bcsiOptMonTxPowerVal Unsigned32, bcsiOptMonRxPowerStatus INTEGER, bcsiOptMonRxPower SnmpAdminString, bcsiOptMonRxPowerVal Unsigned32, bcsiOptMonTxBiasCurrent DisplayString } bcsiOptMonTemperature OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the measured value is normal, high/low alarm or high/low warning. For 100G and 40G optic, this returns the average temperature for all lanes." ::= { bcsiOptMonInfoEntry 1 } bcsiOptMonTxPowerStatus OBJECT-TYPE SYNTAX INTEGER { notSupported(1), notApplicable(2), highAlarm(3), highWarn(4), normal(5), lowWarn(6), lowAlarm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the status of the transmit optical signal power for the interface, indicating whether this is normal or an alarm is present." ::= { bcsiOptMonInfoEntry 2 } bcsiOptMonTxPower OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. For 100G optic, this returns the aggregated Tx Power for all lanes." ::= { bcsiOptMonInfoEntry 3 } bcsiOptMonTxPowerVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "microWatt" MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the transmitter optical signal power for the interface, measured in microWatt. For 100G optic, this returns the aggregated Tx Power for all lanes " ::= { bcsiOptMonInfoEntry 4 } bcsiOptMonRxPowerStatus OBJECT-TYPE SYNTAX INTEGER { notSupported(1), notApplicable(2), highAlarm(3), highWarn(4), normal(5), lowWarn(6), lowAlarm(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the status of the receiver optical signal power for the interface, indicating whether this is normal or an alarm is present." ::= { bcsiOptMonInfoEntry 5 } bcsiOptMonRxPower OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. For 100G and 40G optic, this returns the aggregated Rx Power for all lanes." ::= { bcsiOptMonInfoEntry 6 } bcsiOptMonRxPowerVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "microWatt" MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the value of the receiver optical signal power for the interface, measured in microWatt. For 100G and 40G optic, this returns the aggregated Rx Power for all lanes " ::= { bcsiOptMonInfoEntry 7 } bcsiOptMonTxBiasCurrent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. For 100G and 40G optic, this returns the aggregated Tx Bias Current for all lanes." ::= { bcsiOptMonInfoEntry 8 } bcsiIfMediaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF BcsiIfMediaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated with the operational cards will be included in this table." ::= { bcsiOptMonObjects 3 } bcsiIfMediaInfoEntry OBJECT-TYPE SYNTAX BcsiIfMediaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table. The ifIndices of ethernet interfaces will be used to index this table." INDEX { ifIndex } ::= { bcsiIfMediaInfoTable 1 } BcsiIfMediaInfoEntry ::= SEQUENCE { bcsiIfMediaType DisplayString, bcsiIfMediaVendorName DisplayString, bcsiIfMediaVersion DisplayString, bcsiIfMediaPartNumber DisplayString, bcsiIfMediaSerialNumber DisplayString } bcsiIfMediaType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "he type of the media installed in the physical port." ::= { bcsiIfMediaInfoEntry 1 } bcsiIfMediaVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The media vendor name, full name of the corporation." ::= { bcsiIfMediaInfoEntry 2 } bcsiIfMediaVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The media vendor product version number." ::= { bcsiIfMediaInfoEntry 3 } bcsiIfMediaPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The media vendor part number." ::= { bcsiIfMediaInfoEntry 4 } bcsiIfMediaSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor serial number of the media device." ::= { bcsiIfMediaInfoEntry 5 } -- -- Conformance -- bcsiOptMonCompliances OBJECT IDENTIFIER ::= { bcsiOptMonConformance 1 } bcsiOptMonGroups OBJECT IDENTIFIER ::= { bcsiOptMonConformance 2 } bcsiOptMonCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement BROCADE-OPTICAL-MONITORING-MIB." MODULE MANDATORY-GROUPS { bcsiOptMonLaneMonGroup , bcsiOptMonInfoMonGroup, bcsiIfMediaGroup } ::= { bcsiOptMonCompliances 1 } -- -- Units of Conformance -- bcsiOptMonLaneMonGroup OBJECT-GROUP OBJECTS { bcsiOptMonLaneNum, bcsiOptMonLaneTemperature, bcsiOptMonLaneTxPowerStatus, bcsiOptMonLaneTxPower, bcsiOptMonLaneTxPowerVal, bcsiOptMonLaneRxPowerStatus, bcsiOptMonLaneRxPower, bcsiOptMonLaneRxPowerVal, bcsiOptMonLaneTxBiasCurrent } STATUS current DESCRIPTION "A collection of objects for Optical Lane Monitoring of interface optics." ::= { bcsiOptMonGroups 1 } bcsiOptMonInfoMonGroup OBJECT-GROUP OBJECTS { bcsiOptMonTemperature, bcsiOptMonTxPowerStatus, bcsiOptMonTxPower, bcsiOptMonTxPowerVal, bcsiOptMonRxPowerStatus, bcsiOptMonRxPower, bcsiOptMonRxPowerVal, bcsiOptMonTxBiasCurrent } STATUS current DESCRIPTION "A collection of objects for Optical Monitoring of interface optics." ::= { bcsiOptMonGroups 2 } bcsiIfMediaGroup OBJECT-GROUP OBJECTS { bcsiIfMediaType, bcsiIfMediaVendorName, bcsiIfMediaVersion, bcsiIfMediaPartNumber, bcsiIfMediaSerialNumber } STATUS current DESCRIPTION "A collection of objects for monitoring media information of interfaces." ::= { bcsiOptMonGroups 3 } END -- ========================================================================================