-- MIB File: System.mib -- -- Title: Switch System MIB. -- SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC Integer32, OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY FROM SNMPv2-SMI SwSensorIndex, SwPortIndex FROM Brocade-TC sw FROM SWBASE-MIB; swSystem MODULE-IDENTITY LAST-UPDATED "201805291200Z" -- May 29, 2018 12:00pm ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "Postal: Extreme Networks, Inc. 6480 Via Del Oro San Jose, CA 95119 USA Phone: +1 408 579-2800 E-mail: support@extremenetworks.com WWW: http://www.extremenetworks.com" DESCRIPTION "The MIB module is for system information. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved." REVISION "201805291200Z" -- May 29, 2018 12:00pm DESCRIPTION "Updated ORGANIZATION and CONTACT-INFO with Extreme Networks" REVISION "1104151830Z" -- Apr 15, 2011 6:30pm DESCRIPTION "Initial version of this module." REVISION "1204301800Z" -- Apr 30, 2012 6:00pm DESCRIPTION "Added swID mib object." REVISION "1609231030Z" -- Sept 23, 2016 10:30am DESCRIPTION "Removed implementation of swFCPort, swFabric, swFlashDL*." ::= { sw 1 } -- 3..7 are reserved; should not be used for new features. swEvent OBJECT-IDENTITY STATUS current DESCRIPTION "The OID sub-tree for swEvent group." ::= { sw 8 } swCpuOrMemoryUsage OBJECT-IDENTITY STATUS current DESCRIPTION "The OID sub-tree for cpu or mem usage group." ::= { sw 26 } FcPortFlag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical." SYNTAX BITS { physical (0), virtual (1) } -- -- the System Group (sw) -- swCurrentDate OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current date information in displayable textual format." ::= { swSystem 1 } swBootDate OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time when the system last booted, in displayable textual format." ::= { swSystem 2 } swFWLastUpdated OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The information indicates the date when the firmware was last updated, in displayable textual format." ::= { swSystem 3 } swFlashLastUpdated OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The information indicates the date when the FLASH was last updated, in displayable textual format." ::= { swSystem 4 } swBootPromLastUpdated OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The information indicates the date when the boot PROM was last updated, in displayable textual format." ::= { swSystem 5 } swFirmwareVersion OBJECT-TYPE SYNTAX DisplayString(SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current version of the firwmare." ::= { swSystem 6 } swOperStatus OBJECT-TYPE SYNTAX INTEGER { online (1), offline (2), testing (3), faulty (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the switch is not accessible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external port; o faulty(4) means the switch is not operational." ::= { swSystem 7 } -- 8..9 are reserved; should not be used for new features. swSsn OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The soft serial number of the switch." ::= { swSystem 10 } -- 11..17 are reserved swBeaconOperStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is off, each LED will be in their its regular status indicating color and state." ::= { swSystem 18 } swBeaconAdmStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. When the beacon is set to off, each LED will be in its regular status indicating color and state." ::= { swSystem 19 } swDiagResult OBJECT-TYPE SYNTAX INTEGER { sw-ok (1), sw-faulty (2), sw-embedded-port-fault (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the power-on startup (POST) diagnostics." ::= { swSystem 20 } -- operating environment sensors (temperature, fan, power supply...) swNumSensors OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sensors inside the switch." ::= { swSystem 21 } swSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF SwSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of sensor entries." ::= { swSystem 22 } swSensorEntry OBJECT-TYPE SYNTAX SwSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the sensor information." INDEX { swSensorIndex } ::= { swSensorTable 1 } SwSensorEntry ::= SEQUENCE { swSensorIndex SwSensorIndex, swSensorType INTEGER, swSensorStatus INTEGER, swSensorValue Integer32, swSensorInfo DisplayString } swSensorIndex OBJECT-TYPE SYNTAX SwSensorIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the sensor." ::= { swSensorEntry 1 } swSensorType OBJECT-TYPE SYNTAX INTEGER { temperature (1), fan (2), power-supply (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the sensor type." ::= { swSensorEntry 2 } swSensorStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), faulty (2), below-min (3), nominal (4), above-max (5), absent (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the sensor." ::= { swSensorEntry 3 } swSensorValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V2.0, the temperature sensor value will be in Celsius; the fan value will be in RPM (revolution per minute); and the power supply sensor reading will be unknown." ::= { swSensorEntry 4 } swSensorInfo OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'." ::= { swSensorEntry 5 } -- 23 is reserved swID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the logical switch (0/1)." ::= { swSystem 24 } swEtherIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the Ethernet interface of this logical switch." ::= { swSystem 25 } swEtherIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Mask of the Ethernet interface of this logical switch." ::= { swSystem 26} -- 27..28 are reserved swIPv6Address OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPV6 address." ::= { swSystem 29 } swIPv6Status OBJECT-TYPE SYNTAX INTEGER { tentative (1), preferred (2), ipdeprecated (3), inactive (4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The current status of ipv6 address." ::= { swSystem 30 } -- -- End of System Group -- -- -- swEventTable is defined to gather event info for trap -- SNMP GET/SET is not supported on this -- swEventTrapLevel OBJECT-TYPE SYNTAX INTEGER { none (0), critical (1), error (2), warning (3), informational (4), debug (5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "swAgtTrapSeverityLevel, in absence of swEventTrapLevel, specifies the Trap Severity Level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event's severity level. When an event occurs and if its severity level is at or below the value specified by this object instance, the agent will send the associated swEventTrap to configured recipients." ::= { swEvent 1 } -- { swEvent 2..3 are reserved } swEventNumEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the Event Table." ::= { swEvent 4 } -- possible events available, included her for lib/thresh/fwd.c compilation SwFwEvent ::= INTEGER { started(1), changed(2), exceeded(3), below(4), above(5), inBetween(6), lowBufferCrsd(7) } swEventTable OBJECT-TYPE SYNTAX SEQUENCE OF SwEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of event entries." ::= { swEvent 5 } swEventEntry OBJECT-TYPE SYNTAX SwEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the event table." INDEX { swEventIndex } ::= { swEventTable 1 } SwEventEntry ::= SEQUENCE { swEventIndex Integer32, swEventTimeInfo DisplayString, swEventLevel INTEGER, swEventRepeatCount Integer32, swEventDescr DisplayString, swEventVfId Integer32 } swEventIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the event entry." ::= { swEventEntry 1 } swEventTimeInfo OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the date and time when this event occurred, in textual format." ::= { swEventEntry 2 } swEventLevel OBJECT-TYPE SYNTAX INTEGER { critical (1), error (2), warning (3), informational (4), debug (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the severity level of this event entry." ::= { swEventEntry 3 } swEventRepeatCount OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies how many times this particular event has occurred." ::= { swEventEntry 4 } swEventDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the textual description of the event." ::= { swEventEntry 5 } swEventVfId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Virtual fabric id." ::= { swEventEntry 6 } -- -- System CPU usage and Memory usage -- swCpuUsage OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "System's cpu usage." ::= { swCpuOrMemoryUsage 1 } swCpuNoOfRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times system should take cpu utilization sample before sending the CPU utilization trap." ::= { swCpuOrMemoryUsage 2 } swCpuUsageLimit OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage limit" ::= { swCpuOrMemoryUsage 3 } swCpuPollingInterval OBJECT-TYPE SYNTAX Integer32 (10..3600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval between two memory samples." ::= { swCpuOrMemoryUsage 4 } swCpuAction OBJECT-TYPE SYNTAX Integer32 (0..3) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the actions to be taken if system resources exceed the specified threshold." ::= { swCpuOrMemoryUsage 5 } swMemUsage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "System's memory usage." ::= { swCpuOrMemoryUsage 6 } swMemNoOfRetries OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times system should take memory usage sample before sending the memory usage trap." ::= { swCpuOrMemoryUsage 7 } swMemUsageLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Memory usage limit" ::= { swCpuOrMemoryUsage 8 } swMemPollingInterval OBJECT-TYPE SYNTAX Integer32 (10..3600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval between two memory samples." ::= { swCpuOrMemoryUsage 9 } swMemAction OBJECT-TYPE SYNTAX Integer32 (0..3) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the actions to be taken if system resources exceed the specified threshold." ::= { swCpuOrMemoryUsage 10 } -- -- Enterprise Specific Traps for Switch (sw). -- swTrapsV2 OBJECT-IDENTITY STATUS current DESCRIPTION "The Traps for Extreme's Switch." ::= { sw 0 } swEventTrap NOTIFICATION-TYPE OBJECTS { swEventIndex, swEventTimeInfo, swEventLevel, swEventRepeatCount, swEventDescr, swSsn } STATUS current DESCRIPTION "This trap is generated when an event whose level at or below swEventTrapLevel occurs." --#TYPE "A firmware event has been logged" --#SUMMARY "Event %d: %s (severity level %d) - %s SSN is #%s" --#ARGUMENTS { 0, 1, 2, 4, 5 } --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= { swTrapsV2 4 } swStateChangeTrap NOTIFICATION-TYPE OBJECTS { swOperStatus } STATUS current DESCRIPTION "This trap is sent whenever switch state changes to online/offline" ::= { swTrapsV2 12 } END