GARP-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- Internal GARP MIB -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI TimeInterval, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC gbnL2 FROM ADMIN-MASTER-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; garpMib MODULE-IDENTITY LAST-UPDATED "9907060000Z" ORGANIZATION "admin Systems, Inc." CONTACT-INFO "admin Systems" DESCRIPTION "GARP Module Management" -- revision history REVISION "9907060000Z" DESCRIPTION "Initial version" ::= { gbnL2 2 } garpMIBObjects OBJECT IDENTIFIER ::= { garpMib 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } TimeFilter ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To be used for the index to a table. Allows an application to download only those rows changed since a particular time. A row is considered changed if the value of any object in the row changes or if the row is created or deleted. When sysUpTime is equal to zero, this table shall be empty. One entry exists for each past value of sysUpTime, except that the whole table is purged should sysUpTime wrap. As this basic row is updated new conceptual rows are created (which still share the now updated object values with all other instances). The number of instances which are created is determined by the value of sysUpTime at which the basic row was last updated. One instance will exist for each value of sysUpTime at the last update time for the row. A new timeMark instance is created for each new sysUpTime value. Each new conceptual row will be associated with the timeMark instance which was created at the value of sysUpTime with which the conceptual row is to be associated. By definition all conceptual rows were updated at or after time zero and so at least one conceptual row (associated with timeMark.0) must exist for each underlying (basic) row. See the appendix for further discussion of this variable. Consider the following fooTable: fooTable ... INDEX { fooTimeMark, fooIndex } FooEntry { fooTimeMark TimeFilter fooIndex INTEGER, fooCounts Counter } Should there be two basic rows in this table (fooIndex == 1, fooIndex == 2) and row 1 was updated most recently at time 6, while row 2 was updated most recently at time 8, and both rows had been updated on several earlier occasions such that the current values were 5 and 9 respectively then the following fooCounts instances would exist. fooCounts.0.1 5 fooCounts.0.2 9 fooCounts.1.1 5 fooCounts.1.2 9 fooCounts.2.1 5 fooCounts.2.2 9 fooCounts.3.1 5 fooCounts.3.2 9 fooCounts.4.1 5 fooCounts.4.2 9 fooCounts.5.1 5 fooCounts.5.2 9 fooCounts.6.1 5 fooCounts.6.2 9 fooCounts.7.2 9 -- note that row 1 doesn't exist for fooCounts.8.2 9 -- times 7 and 8" SYNTAX TimeTicks PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING VlanIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB." SYNTAX Unsigned32 VlanId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 12-bit VLAN ID used in the VLAN Tag header." SYNTAX INTEGER (1..4094) -- ------------------------------------------------------------- -- groups in the GARP MIB -- ------------------------------------------------------------- gDot1qBase OBJECT IDENTIFIER ::= { garpMIBObjects 1 } gDot1qTp OBJECT IDENTIFIER ::= { garpMIBObjects 2 } gDot1qStatic OBJECT IDENTIFIER ::= { garpMIBObjects 3 } gDot1qVlan OBJECT IDENTIFIER ::= { garpMIBObjects 4 } gDot1dGarp OBJECT IDENTIFIER ::= { garpMIBObjects 5 } gDot1dGmrp OBJECT IDENTIFIER ::= { garpMIBObjects 6 } gDot1dExtBase OBJECT IDENTIFIER ::= { garpMIBObjects 7 } gDot1qExtend OBJECT IDENTIFIER ::= { garpMIBObjects 8 } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- gDot1qBase group -- ------------------------------------------------------------- gDot1qVlanVersionNumber OBJECT-TYPE SYNTAX INTEGER { version1(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of IEEE 802.1Q that this device supports." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1" DEFVAL { 1 } ::= { gDot1qBase 1 } gDot1qMaxVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum IEEE 802.1Q VLAN ID that this device supports." REFERENCE "IEEE 802.1Q/D11 Section 9.3.2.3" ::= { gDot1qBase 2 } gDot1qMaxSupportedVlans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of IEEE 802.1Q VLANs that this device supports." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1" ::= { gDot1qBase 3 } gDot1qNumVlans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of IEEE 802.1Q VLANs that are configured in this device." REFERENCE "IEEE 802.1Q/D11 Section 12.7.1.1" ::= { gDot1qBase 4 } gDot1qGvrpStatus OBJECT-TYPE SYNTAX EnabledStatus{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enabled } The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports." DEFVAL { disabled } ::= { gDot1qBase 5 } gDot1qVlanIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives the mapping of linear indices to VLAN Indices. It is necessary because CCDGEN doesn't support nonlinear indices." REFERENCE "No reference" ::= { gDot1qBase 6 } gDot1qVlanIndexMappingEntry OBJECT-TYPE SYNTAX GarpDot1qVlanIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry maps a linear index to a VLAN index." INDEX { gDot1qVlanSlotIndex } ::= { gDot1qVlanIndexMappingTable 1 } GarpDot1qVlanIndexMappingEntry ::= SEQUENCE { gDot1qVlanSlotIndex INTEGER, gDot1qVlanSlotActualIndex VlanIndex } gDot1qVlanSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The durable slot index for this VLAN" ::= { gDot1qVlanIndexMappingEntry 1 } gDot1qVlanSlotActualIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all } The actual VLAN index for this durable VLAN slot" ::= { gDot1qVlanIndexMappingEntry 2 } -- ------------------------------------------------------------- -- the gDot1qTp group -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- the current Filtering Database Table -- ------------------------------------------------------------- gDot1qFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the gDot1qVlanCurrentTable." ::= { gDot1qTp 1 } gDot1qFdbEntry OBJECT-TYPE SYNTAX GarpDot1qFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific Filtering Database." INDEX { gDot1qFdbId } ::= { gDot1qFdbTable 1 } GarpDot1qFdbEntry ::= SEQUENCE { gDot1qFdbId Unsigned32, gDot1qFdbDynamicCount Counter32 } gDot1qFdbId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identity of this Filtering Database." ::= { gDot1qFdbEntry 1 } gDot1qFdbDynamicCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of dynamic entries in this Filtering Database." REFERENCE "IEEE 802.1Q/D11 Section 12.7.1.1.3" ::= { gDot1qFdbEntry 2 } -- ------------------------------------------------------------- -- Multiple Forwarding Databases for 802.1Q Transparent devices -- This table is an alternative to the dot1dTpFdbTable, -- previously defined for 802.1D devices which only support a -- single Forwarding Database. -- ------------------------------------------------------------- gDot1qTpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7" ::= { gDot1qTp 2 } gDot1qTpFdbEntry OBJECT-TYPE SYNTAX GarpDot1qTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information." INDEX { gDot1qFdbId, gDot1qTpFdbAddress } ::= { gDot1qTpFdbTable 1 } GarpDot1qTpFdbEntry ::= SEQUENCE { gDot1qTpFdbAddress MacAddress, gDot1qTpFdbPort INTEGER, gDot1qTpFdbStatus INTEGER } gDot1qTpFdbAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast MAC address for which the device has forwarding and/or filtering information." ::= { gDot1qTpFdbEntry 1 } gDot1qTpFdbPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of gDot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the gDot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of gDot1qTpFdbStatus is not learned(3)." ::= { gDot1qTpFdbEntry 2 } gDot1qTpFdbStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of gDot1qTpFdbPort, nor an entry in the gDot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of gDot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of gDot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of gDot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of gDot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of gDot1qTpFdbAddress is also the value of an existing instance of gDot1qStaticAddress." ::= { gDot1qTpFdbEntry 3 } -- ------------------------------------------------------------- -- Dynamic Group Registration Table -- ------------------------------------------------------------- gDot1qTpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qTpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded." ::= { gDot1qTp 3 } gDot1qTpGroupEntry OBJECT-TYPE SYNTAX GarpDot1qTpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. The subset of these ports learnt dynamically is also provided." INDEX { gDot1qVlanIndex, gDot1qTpGroupAddress } ::= { gDot1qTpGroupTable 1 } GarpDot1qTpGroupEntry ::= SEQUENCE { gDot1qTpGroupAddress MacAddress, gDot1qTpGroupEgressPorts PortList, gDot1qTpGroupLearnt PortList } gDot1qTpGroupAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination Group MAC address in a frame to which this entry's filtering information applies." ::= { gDot1qTpGroupEntry 1 } gDot1qTpGroupEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the gDot1qForwardAllPorts list." ::= { gDot1qTpGroupEntry 2 } gDot1qTpGroupLearnt OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The subset of ports in gDot1qTpGroupEgressPorts which were learnt by GMRP or some other dynamic mechanism, in this Filtering database." ::= { gDot1qTpGroupEntry 3 } -- ------------------------------------------------------------- -- Service Requirements Group -- ------------------------------------------------------------- gDot1qForwardAllTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qForwardAllEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated." REFERENCE "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" ::= { gDot1qTp 4 } gDot1qForwardAllEntry OBJECT-TYPE SYNTAX GarpDot1qForwardAllEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP." -- -- This table is actually indexed by VLAN ID, however for the purposes -- of default value table generation, we introduce a phony index of -- the dimension of the VLAN slot table. -- -- INDEX { gDot1qVlanIndex } -- INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime ::= { gDot1qForwardAllTable 1 } GarpDot1qForwardAllEntry ::= SEQUENCE { gDot1qForwardAllPorts PortList, gDot1qForwardAllVlanIndex VlanIndex, gDot1qForwardAllStaticPorts PortList, gDot1qForwardAllForbiddenPorts PortList } gDot1qForwardAllPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management." ::= { gDot1qForwardAllEntry 1 } gDot1qForwardAllVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all } This is here only to allow the VLAN index to be saved along with the corresponding forward all table entry." ::= { gDot1qForwardAllEntry 2 } gDot1qForwardAllStaticPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by gDot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by gDot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in gDot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate standard non-EFS behaviour, i.e. forward all multicasts to all ports." ::= { gDot1qForwardAllEntry 3 } gDot1qForwardAllForbiddenPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in gDot1qForwardAllStaticPorts. The default value is a string of zeros of appropriate length." ::= { gDot1qForwardAllEntry 4 } gDot1qForwardUnregisteredTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qForwardUnregisteredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which there is no more specific forwarding information applies. This is configured statically by management and determined dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated." REFERENCE "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7" ::= { gDot1qTp 5 } gDot1qForwardUnregisteredEntry OBJECT-TYPE SYNTAX GarpDot1qForwardUnregisteredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP." -- -- This table is actually indexed by VLAN ID, however for the purposes -- of default value table generation, we introduce a phony index of -- the dimension of the VLAN slot table. -- -- INDEX { gDot1qVlanIndex } -- INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime ::= { gDot1qForwardUnregisteredTable 1 } GarpDot1qForwardUnregisteredEntry ::= SEQUENCE { gDot1qForwardUnregisteredPorts PortList, gDot1qForwardUnregisteredVlanIndex VlanIndex, gDot1qForwardUnregisteredStaticPorts PortList, gDot1qForwardUnregisteredForbiddenPorts PortList } gDot1qForwardUnregisteredPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management." ::= { gDot1qForwardUnregisteredEntry 1 } gDot1qForwardUnregisteredVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all } This is here only to allow the VLAN index to be saved along with the corresponding forward unregistered table entry." ::= { gDot1qForwardUnregisteredEntry 2 } gDot1qForwardUnregisteredStaticPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by gDot1qForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in gDot1qForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of gDot1qForwardAllStaticPorts." ::= { gDot1qForwardUnregisteredEntry 3 } gDot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in gDot1qForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length." ::= { gDot1qForwardUnregisteredEntry 4 } -- ------------------------------------------------------------- -- The Static (Destination-Address Filtering) Database -- ------------------------------------------------------------- gDot1qStaticUnicastTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qStaticUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7, ISO/IEC 15802-3 Section 7.9.1" ::= { gDot1qStatic 1 } gDot1qStaticUnicastEntry OBJECT-TYPE SYNTAX GarpDot1qStaticUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded." INDEX { gDot1qFdbId, gDot1qStaticUnicastAddress, gDot1qStaticUnicastReceivePort } ::= { gDot1qStaticUnicastTable 1 } GarpDot1qStaticUnicastEntry ::= SEQUENCE { gDot1qStaticUnicastAddress MacAddress, gDot1qStaticUnicastReceivePort INTEGER, gDot1qStaticUnicastAllowedToGoTo PortList, gDot1qStaticUnicastStatus INTEGER } gDot1qStaticUnicastAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address." ::= { gDot1qStaticUnicastEntry 1 } gDot1qStaticUnicastReceivePort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry." ::= { gDot1qStaticUnicastEntry 2 } gDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports a specific unicast address may be dynamically learnt on. The gDot1qTpFdbTable will have an equivalent entry with a gDot1qTpFdbPort value of '0' until this address has been learnt, when it will be updated with the port the address has been seen on. This only applies to ports that are members of the VLAN, defined by gDot1qVlanCurrentEgressPorts. The default value of this object is a string of ones of appropriate length." REFERENCE "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" ::= { gDot1qStaticUnicastEntry 3 } gDot1qStaticUnicastStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out." DEFVAL { permanent } ::= { gDot1qStaticUnicastEntry 4 } gDot1qStaticMulticastTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qStaticMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7, ISO/IEC 15802-3 Section 7.9.1" ::= { gDot1qStatic 2 } gDot1qStaticMulticastEntry OBJECT-TYPE SYNTAX GarpDot1qStaticMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded." INDEX { gDot1qVlanIndex, gDot1qStaticMulticastAddress, gDot1qStaticMulticastReceivePort } ::= { gDot1qStaticMulticastTable 1 } GarpDot1qStaticMulticastEntry ::= SEQUENCE { gDot1qStaticMulticastVlanIndex VlanIndex, gDot1qStaticMulticastAddress MacAddress, gDot1qStaticMulticastReceivePort INTEGER, gDot1qStaticMulticastStaticEgressPorts PortList, gDot1qStaticMulticastForbiddenEgressPorts PortList, gDot1qStaticMulticastStatus INTEGER, gDot1qGmrpLearningPermit INTEGER } gDot1qStaticMulticastVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all } This is here to allow the VLAN Index to be saved along with the corresponding multicast table entry." ::= { gDot1qStaticMulticastEntry 1 } gDot1qStaticMulticastAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all} The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address." ::= { gDot1qStaticMulticastEntry 2 } gDot1qStaticMulticastReceivePort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "DURABLE: { 0:all } Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry." ::= { gDot1qStaticMulticastEntry 3 } gDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is already a member of the set of ports in gDot1qStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length." ::= { gDot1qStaticMulticastEntry 4 } gDot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is already a member of the set of ports in gDot1qStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length." ::= { gDot1qStaticMulticastEntry 5 } gDot1qStaticMulticastStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0:all } This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out." DEFVAL { permanent } ::= { gDot1qStaticMulticastEntry 6 } gDot1qGmrpLearningPermit OBJECT-TYPE SYNTAX INTEGER { gmrpLearningEnable(1), gmrpLearningDisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to add a mcast to garp so that other devices can learn it." ::= { gDot1qStaticMulticastEntry 7 } -- ------------------------------------------------------------- -- The Current VLAN Database -- ------------------------------------------------------------- gDot1qVlanNumDeletes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a VLAN entry has been deleted from the gDot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2." ::= { gDot1qVlan 1 } gDot1qVlanCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received." ::= { gDot1qVlan 2 } gDot1qVlanCurrentEntry OBJECT-TYPE SYNTAX GarpDot1qVlanCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received." INDEX { gDot1qVlanTimeMark, gDot1qVlanIndex } ::= { gDot1qVlanCurrentTable 1 } GarpDot1qVlanCurrentEntry ::= SEQUENCE { gDot1qVlanTimeMark TimeFilter, gDot1qVlanIndex VlanIndex, gDot1qVlanFdbId Unsigned32, gDot1qVlanCurrentEgressPorts PortList, gDot1qVlanCurrentUntaggedPorts PortList, gDot1qVlanStatus INTEGER, gDot1qVlanCreationTime TimeTicks } gDot1qVlanTimeMark OBJECT-TYPE SYNTAX TimeFilter MAX-ACCESS not-accessible STATUS current DESCRIPTION "A TimeFilter for this entry. See the TimeFilter textual convention to see how this works." ::= { gDot1qVlanCurrentEntry 1 } gDot1qVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN-ID or other identifier refering to this VLAN." ::= { gDot1qVlanCurrentEntry 2 } gDot1qVlanFdbId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Filtering Database used by this VLAN. This is one of the gDot1qFdbId values in the gDot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in gDot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in gDot1qLearningConstraintsTable." ::= { gDot1qVlanCurrentEntry 3 } gDot1qVlanCurrentEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { gDot1qVlanCurrentEntry 4 } gDot1qVlanCurrentUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports which are transmitting traffic for this VLAN as untagged frames." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { gDot1qVlanCurrentEntry 5 } gDot1qVlanStatus OBJECT-TYPE SYNTAX INTEGER { other(1), permanent(2), dynamicGvrp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in gDot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent gDot1qVlanStaticTable entry and ports learnt dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN and it will be removed when the last port leaves the VLAN." ::= { gDot1qVlanCurrentEntry 6 } gDot1qVlanCreationTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this VLAN was created." ::= { gDot1qVlanCurrentEntry 7 } -- ------------------------------------------------------------- -- The Static VLAN Database -- ------------------------------------------------------------- gDot1qVlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { gDot1qVlan 3 } gDot1qVlanStaticEntry OBJECT-TYPE SYNTAX GarpDot1qVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into the device by (local or network) management." -- -- This table is actually indexed by VLAN ID, however for the purposes -- of default value table generation, we introduce a phony index of -- the dimension of the VLAN slot table. -- -- INDEX { gDot1qVlanIndex } -- INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime ::= { gDot1qVlanStaticTable 1 } GarpDot1qVlanStaticEntry ::= SEQUENCE { gDot1qVlanStaticName DisplayString, -- SnmpAdminString, gDot1qVlanStaticEgressPorts PortList, gDot1qVlanForbiddenEgressPorts PortList, gDot1qVlanStaticUntaggedPorts PortList, gDot1qVlanStaticRowStatus RowStatus, gDot1qGvrpLearningPermit INTEGER, gDot1qVlanSpanningTreeGroup INTEGER } gDot1qVlanStaticName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) -- SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 'Default' } An administratively assigned string, which may be used to identify the VLAN." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { gDot1qVlanStaticEntry 1 } gDot1qVlanStaticEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in gDot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" ::= { gDot1qVlanStaticEntry 2 } gDot1qVlanForbiddenEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in gDot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" ::= { gDot1qVlanStaticEntry 3 } gDot1qVlanStaticUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 0:all } The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (gDot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { gDot1qVlanStaticEntry 4 } gDot1qVlanStaticRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { gDot1qVlanStaticEntry 5 } gDot1qGvrpLearningPermit OBJECT-TYPE SYNTAX INTEGER { gvrpLearningEnable(1), gvrpLearningDisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to add a vlan to garp so that other devices can learn it." --将一个vlan加入到garp中以允许其他交换机学习该vlan ::= { gDot1qVlanStaticEntry 6 } gDot1qVlanSpanningTreeGroup OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to Get/Set current vlan's spanning-tree group num" --用于获取/设置vlan的生成树组 ::= { gDot1qVlanStaticEntry 7 } gDot1qNextFreeLocalVlanIndex OBJECT-TYPE SYNTAX INTEGER (0|4096..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The next available value for gDot1qVlanIndex of a local VLAN entry in gDot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted - another manager may have already got in during the intervening time interval. In this case, gDot1qNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row." ::= { gDot1qVlan 4 } -- ------------------------------------------------------------- -- The VLAN Port Configuration Table -- ------------------------------------------------------------- gDot1qPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port control and status information for VLAN configuration in the device." ::= { gDot1qVlan 5 } gDot1qPortVlanEntry OBJECT-TYPE SYNTAX GarpDot1qPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort." INDEX { gDot1dPortGmrp } ::= { gDot1qPortVlanTable 1 } GarpDot1qPortVlanEntry ::= SEQUENCE { gDot1qPvid VlanIndex, gDot1qPortAcceptableFrameTypes INTEGER, gDot1qPortIngressFiltering TruthValue, gDot1qPortGvrpStatus EnabledStatus, gDot1qPortGvrpFailedRegistrations Counter32, gDot1qPortGvrpLastPduOrigin MacAddress } gDot1qPvid OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 1:all } The PVID, the VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.1" DEFVAL { 1 } ::= { gDot1qPortVlanEntry 1 } gDot1qPortAcceptableFrameTypes OBJECT-TYPE SYNTAX INTEGER { admitAll(1), admitOnlyVlanTagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 1:all } When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Prority-Tagged frames received on this port. When admitAll(1), untagged frames or Prority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.3" DEFVAL { admitAll } ::= { gDot1qPortVlanEntry 2 } gDot1qPortIngressFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: {1:all} When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP." REFERENCE "IEEE 802.1Q/D11 Section 12.10.1.4" DEFVAL { false } ::= { gDot1qPortVlanEntry 3 } gDot1qPortGvrpStatus OBJECT-TYPE SYNTAX EnabledStatus { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: {enabled:all} The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as gDot1qGvrpStatus is also enabled for this device. When disabled(2) but gDot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port." DEFVAL { disabled } ::= { gDot1qPortVlanEntry 4 } gDot1qPortGvrpFailedRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failed GVRP registrations, for any reason, on this port." ::= { gDot1qPortVlanEntry 5 } gDot1qPortGvrpLastPduOrigin OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Source MAC Address of the last GVRP message received on this port." ::= { gDot1qPortVlanEntry 6 } -- ------------------------------------------------------------- -- The GARP Port Table -- ------------------------------------------------------------- gDot1dPortGarpTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1dPortGarpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of GARP control information about every bridge port. This is indexed by gDot1qBasePort." ::= { gDot1dGarp 1 } gDot1dPortGarpEntry OBJECT-TYPE SYNTAX GarpDot1dPortGarpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GARP control information for a bridge port." INDEX { gDot1dPortGmrp } ::= { gDot1dPortGarpTable 1 } GarpDot1dPortGarpEntry ::= SEQUENCE { gDot1dPortEnable INTEGER, gDot1dPortGarpJoinTime TimeInterval, gDot1dPortGarpLeaveTime TimeInterval, gDot1dPortGarpLeaveAllTime TimeInterval } gDot1dPortEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled/disabled status of the port for all GARP protocol instances. This should be set according to the current link state of the port" REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { gDot1dPortGarpEntry 1 } gDot1dPortGarpJoinTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 20:all } The GARP Join time, in centiseconds." DEFVAL { 20 } ::= { gDot1dPortGarpEntry 2 } gDot1dPortGarpLeaveTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 60:all } The GARP Leave time, in centiseconds." DEFVAL { 60 } ::= { gDot1dPortGarpEntry 3 } gDot1dPortGarpLeaveAllTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 1000:all } The GARP LeaveAll time, in centiseconds." DEFVAL { 1000 } ::= { gDot1dPortGarpEntry 4 } gDot1dGmrpStatus OBJECT-TYPE SYNTAX EnabledStatus { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enabled } The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs, on all ports and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports." DEFVAL { disabled } ::= { gDot1dExtBase 1 } -- ------------------------------------------------------------- -- The GMRP Port Configuration and Status Table -- ------------------------------------------------------------- gDot1dPortGmrpTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1dPortGmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of GMRP control and status information about every bridge port. Augments the gDot1qBasePortTable." ::= { gDot1dGmrp 1 } gDot1dPortGmrpEntry OBJECT-TYPE SYNTAX GarpDot1dPortGmrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GMRP control and status information for a bridge port." INDEX { gDot1dPortGmrp } ::= { gDot1dPortGmrpTable 1 } GarpDot1dPortGmrpEntry ::= SEQUENCE { gDot1dPortGmrp INTEGER, gDot1dPortGmrpStatus EnabledStatus, gDot1dPortGmrpFailedRegistrations Counter32, gDot1dPortGmrpLastPduOrigin MacAddress } gDot1dPortGmrp OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port for which this entry contains GMRP management information." REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2" ::= { gDot1dPortGmrpEntry 1 } gDot1dPortGmrpStatus OBJECT-TYPE SYNTAX EnabledStatus { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enabled:all } The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as garpGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if garpGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port." DEFVAL { disabled } ::= { gDot1dPortGmrpEntry 2 } gDot1dPortGmrpFailedRegistrations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failed GMRP registrations, for any reason, in all VLANs, on this port." ::= { gDot1dPortGmrpEntry 3 } gDot1dPortGmrpLastPduOrigin OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Source MAC Address of the last GMRP message received on this port." ::= { gDot1dPortGmrpEntry 4 } -- ------------------------------------------------------------- -- The VLAN Learning Constraints Table -- ------------------------------------------------------------- gDot1qLearningConstraintsTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qLearningConstraintsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing learning constraints for sets of Shared and Independendent VLANs." REFERENCE "IEEE 802.1Q/D11 Section 12.10.3.1" ::= { gDot1qVlan 6 } gDot1qLearningConstraintsEntry OBJECT-TYPE SYNTAX GarpDot1qLearningConstraintsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A learning constraint defined for a VLAN." INDEX { gDot1qConstraintVlan, gDot1qConstraintSet } ::= { gDot1qLearningConstraintsTable 1 } GarpDot1qLearningConstraintsEntry ::= SEQUENCE { gDot1qConstraintVlan VlanIndex, gDot1qConstraintSet INTEGER, gDot1qConstraintType INTEGER, gDot1qConstraintStatus RowStatus } gDot1qConstraintVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the row in gDot1qVlanCurrentTable for the VLAN constrained by this entry." ::= { gDot1qLearningConstraintsEntry 1 } gDot1qConstraintSet OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identity of the constraint set to which gDot1qConstraintVlan belongs. These values may be chosen by the management station." ::= { gDot1qLearningConstraintsEntry 2 } gDot1qConstraintType OBJECT-TYPE SYNTAX INTEGER { independent(1), shared(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of constraint this entry defines. independent(1) - the VLAN, gDot1qConstraintVlan, uses an independent filtering database from all other VLANs in the same set, defined by gDot1qConstraintSet. shared(2) - the VLAN, gDot1qConstraintVlan, shares the same filtering database as all other VLANs in the same set, defined by gDot1qConstraintSet." ::= { gDot1qLearningConstraintsEntry 3 } gDot1qConstraintStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { gDot1qLearningConstraintsEntry 4 } gDot1qConstraintSetDefault OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable." ::= { gDot1qVlan 7 } gDot1qConstraintTypeDefault OBJECT-TYPE SYNTAX INTEGER { independent(1), shared(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in gDot1qLearningConstraintsTable. The types are as defined for gDot1qConstraintType." ::= { gDot1qVlan 8 } -- ------------------------------------------------------------- -- GARP MIB - Conformance Information -- ------------------------------------------------------------- garpMIBConformance OBJECT IDENTIFIER ::= { garpMib 2 } garpMIBGroups OBJECT IDENTIFIER ::= { garpMIBConformance 1 } garpMIBCompliances OBJECT IDENTIFIER ::= { garpMIBConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- garpMIBBaseGroup OBJECT-GROUP OBJECTS { gDot1qVlanVersionNumber, gDot1qMaxVlanId, gDot1qMaxSupportedVlans, gDot1qNumVlans, gDot1qGvrpStatus, gDot1qFdbDynamicCount, gDot1qTpFdbPort, gDot1qTpFdbStatus, gDot1qTpGroupEgressPorts, gDot1qTpGroupLearnt, gDot1qForwardAllPorts, gDot1qForwardAllStaticPorts, gDot1qForwardAllForbiddenPorts, gDot1qForwardUnregisteredPorts, gDot1qForwardUnregisteredStaticPorts, gDot1qForwardUnregisteredForbiddenPorts, gDot1qStaticUnicastAllowedToGoTo, gDot1qStaticUnicastStatus, gDot1qStaticMulticastStaticEgressPorts, gDot1qStaticMulticastForbiddenEgressPorts, gDot1qStaticMulticastStatus, gDot1qVlanNumDeletes, gDot1qVlanFdbId, gDot1qVlanCurrentEgressPorts, gDot1qVlanCurrentUntaggedPorts, gDot1qVlanStatus, gDot1qVlanCreationTime, gDot1qVlanStaticName, gDot1qVlanStaticEgressPorts, gDot1qVlanForbiddenEgressPorts, gDot1qVlanStaticUntaggedPorts, gDot1qVlanStaticRowStatus, gDot1qNextFreeLocalVlanIndex, gDot1qPvid, gDot1qPortAcceptableFrameTypes, gDot1qPortIngressFiltering, gDot1qPortGvrpStatus, gDot1qPortGvrpFailedRegistrations, gDot1qPortGvrpLastPduOrigin, gDot1dPortGarpJoinTime, gDot1dPortGarpLeaveTime, gDot1dPortGarpLeaveAllTime, gDot1dPortGmrpStatus, gDot1dPortGmrpFailedRegistrations, gDot1dPortGmrpLastPduOrigin, gDot1dGmrpStatus, gDot1qConstraintType, gDot1qConstraintStatus, gDot1qConstraintSetDefault, gDot1qConstraintTypeDefault } STATUS current DESCRIPTION "GARP module groups." ::= { garpMIBGroups 1 } -- ------------------------------------------------------------- -- the gDot1qExtend group -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- the double tagging table -- ------------------------------------------------------------- gDot1qDoubleTagging OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The global QinQ status" --全局QinQ的状态 ::= { gDot1qExtend 1 } gDot1qTpid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The tag protocol id of service provider, this value is used to determine if a incoming packets is tagged and used when insert a new tag" --用于配置服务提供者的vlan协议号,用于判断端口是否为tagged或者是 --为报文插入一个新的tag头时使用 ::= { gDot1qExtend 2 } gDot1qDoubleTaggingTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qDoubleTaggingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to config the double tagging function." --该表用于配置双tag头相关的功能. ::= { gDot1qExtend 3 } gDot1qDoubleTaggingEntry OBJECT-TYPE SYNTAX GarpDot1qDoubleTaggingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about double tagging table entry." --双tag表项 INDEX { gDot1qDoubleTaggingPort } ::= { gDot1qDoubleTaggingTable 1 } GarpDot1qDoubleTaggingEntry ::= SEQUENCE { gDot1qDoubleTaggingPort INTEGER, gDot1qDoubleTaggingMode INTEGER, gDot1qPortInnerTpid INTEGER, gDot1qPortOuterTpid INTEGER } gDot1qDoubleTaggingPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index of double tagging entry." --双tag表的索引 ::= { gDot1qDoubleTaggingEntry 1 } gDot1qDoubleTaggingMode OBJECT-TYPE SYNTAX INTEGER{ dtagModeNone(0), dtagModeInternal(1), dtagModeExternal(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port's 8021q-in-8021q mode: dtagModeNone means QinQ is disabled; dtagModeInternal means incoming pkt's will be inserted a tag if it has no tag or its' tag-id doesn't match that of the port. dtagModeExternal means incoming pkt's tag is always be ignored and a new tag is inserted." --配置端口的QinQ模式，dtagModeNone为关闭端口的QinQ，dtagModeInternal只有 --vlan协议号与端口的配置不同时才在报文中插入新的tag头，dtagModeExternal意 --味着端口总是忽略报文的tag属性而为报文新添一个tag头 ::= { gDot1qDoubleTaggingEntry 2 } gDot1qPortInnerTpid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled." --双tag使能时,用于配置报文原始tag头的tpid ::= { gDot1qDoubleTaggingEntry 3 } gDot1qPortOuterTpid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled." --双tag使能时,用于配置报文新tag头的tpid ::= { gDot1qDoubleTaggingEntry 4 } gDot1qInnerTpid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled." --双tag使能时,用于配置报文原始tag头的tpid ::= { gDot1qExtend 4 } -- ------------------------------------------------------------- -- the current VLAN MAC Table -- ------------------------------------------------------------- gDot1qVlanMacTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assign a VLAN ID for a packet based on the source MAC Address. If an entry is found, then the VLAN ID, PRIORITY of vlan mac table will be used for the packet." --该表用于基于报文的源MAC地址为报文添加一个tag头，如果找到匹配的表 --项，那么VLAN MAC表的vlan id以及优先级就会被添加到报文上. ::= { gDot1qExtend 5 } gDot1qVlanMacEntry OBJECT-TYPE SYNTAX GarpDot1qVlanMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan mac table entry." --vlan mac表项的信息 INDEX { gDot1qVlanMacAddress } ::= { gDot1qVlanMacTable 1 } GarpDot1qVlanMacEntry ::= SEQUENCE { gDot1qVlanMacAddress MacAddress, gDot1qVlanMacNewVlanId INTEGER, gDot1qVlanMacNewPriority INTEGER, gDot1qVlanMacStatus INTEGER } gDot1qVlanMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The index of vlan mac table entry." --vlan mac表的索引 ::= { gDot1qVlanMacEntry 1 } gDot1qVlanMacNewVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan id to be assigned to the packet." --将要为报文添加的vlan id ::= { gDot1qVlanMacEntry 2 } gDot1qVlanMacNewPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Priority to be assigned to the packet." --将要为报文添加的优先级 ::= { gDot1qVlanMacEntry 3 } gDot1qVlanMacStatus OBJECT-TYPE SYNTAX INTEGER { active(1), createAndGo(2), destroy(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qVlanMacEntry 4 } -- ------------------------------------------------------------- -- the current VLAN SUBNET Table -- ------------------------------------------------------------- gDot1qVlanSubnetTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assign a VLAN ID for a packet based on the source IP Address." --该表用于基于报文的源ip为报文添加tag头 ::= { gDot1qExtend 6 } gDot1qVlanSubnetEntry OBJECT-TYPE SYNTAX GarpDot1qVlanSubnetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan subnet table entry." --vlan subnet表的表项信息 INDEX { gDot1qVlanSubnetIpAddress, gDot1qVlanSubnetIpMask } ::= { gDot1qVlanSubnetTable 1 } GarpDot1qVlanSubnetEntry ::= SEQUENCE { gDot1qVlanSubnetIpAddress IpAddress, gDot1qVlanSubnetIpMask IpAddress, gDot1qVlanSubnetNewVlanId INTEGER, gDot1qVlanSubnetNewPriority INTEGER, gDot1qVlanSubnetStatus INTEGER } gDot1qVlanSubnetIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The first index of vlan subnet table entry." --vlan subnet 表的第一个索引 ::= { gDot1qVlanSubnetEntry 1 } gDot1qVlanSubnetIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second index of vlan subnet table entry." --vlan subnet 表的第二个索引 ::= { gDot1qVlanSubnetEntry 2 } gDot1qVlanSubnetNewVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan id to be assigned to the packet." --将要为报文添加的vlan id ::= { gDot1qVlanSubnetEntry 3 } gDot1qVlanSubnetNewPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Priority to be assigned to the packet." --将要添加给报文的优先级值 ::= { gDot1qVlanSubnetEntry 4 } gDot1qVlanSubnetStatus OBJECT-TYPE SYNTAX INTEGER { active(1), createAndGo(2), destroy(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qVlanSubnetEntry 5 } -- ------------------------------------------------------------- -- the current VLAN PROTOCOL Table -- ------------------------------------------------------------- gDot1qVlanProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port." --该表用于基于报文的协议字段为报文添加新的tag头 ::= { gDot1qExtend 7 } gDot1qVlanProtoEntry OBJECT-TYPE SYNTAX GarpDot1qVlanProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan protocol table entry." --基于协议的vlan表的表项 INDEX { gDot1qVlanProtoFrameType, gDot1qVlanProtoEthertype, gDot1qVlanProtoPortId } ::= { gDot1qVlanProtoTable 1 } GarpDot1qVlanProtoEntry ::= SEQUENCE { gDot1qVlanProtoFrameType INTEGER, gDot1qVlanProtoEthertype INTEGER, gDot1qVlanProtoPortId INTEGER, gDot1qVlanProtoNewVlanId INTEGER, gDot1qVlanProtoStatus INTEGER } gDot1qVlanProtoFrameType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Frame type：the first index of vlan protocol entry." --Frame type：基于协议的vlan表的第一个索引. ::= { gDot1qVlanProtoEntry 1 } gDot1qVlanProtoEthertype OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ether type：the second index of vlan protocol entry." --Ether type：基于协议的vlan表的第二个索引. ::= { gDot1qVlanProtoEntry 2 } gDot1qVlanProtoPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress, wthe third index of vlan protocol entry." --报文的入端口,基于协议的vlan表的第三个索引 ::= { gDot1qVlanProtoEntry 3 } gDot1qVlanProtoNewVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan id to be assigned to packet." --将要赋予报文的vlan id ::= { gDot1qVlanProtoEntry 4 } gDot1qVlanProtoStatus OBJECT-TYPE SYNTAX INTEGER { active(1), createAndGo(2), destroy(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qVlanProtoEntry 5 } -- ------------------------------------------------------------- -- the current VLAN TRANSLATION Table -- ------------------------------------------------------------- gDot1qVlanTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to to translate the VLAN ID of an incoming tagged packet to another VLAN ID based on the ingress port and incoming packet VLAN ID." --该表用于基于报文的vlan号和入端口转换报文的vlan id ::= { gDot1qExtend 8 } gDot1qVlanTransEntry OBJECT-TYPE SYNTAX GarpDot1qVlanTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan translation table entry." --vlan转换表的表项信息 INDEX { gDot1qVlanTransVlanId, gDot1qVlanTransPortId } ::= { gDot1qVlanTranslationTable 1 } GarpDot1qVlanTransEntry ::= SEQUENCE { gDot1qVlanTransVlanId INTEGER, gDot1qVlanTransPortId INTEGER, gDot1qVlanTransNewVlanId INTEGER, gDot1qVlanTransNewPriority INTEGER, gDot1qVlanTransStatus INTEGER } gDot1qVlanTransVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The first index of vlan translation table entry." --vlan转换表项的第一个索引 ::= { gDot1qVlanTransEntry 1 } gDot1qVlanTransPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The second index of vlan translation table entry." --vlan转换表项的第二个索引 ::= { gDot1qVlanTransEntry 2 } gDot1qVlanTransNewVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The new vlan id to be assigned to the packet who match a vlan translation table entry." --转换后的报文的新的vlan id值 ::= { gDot1qVlanTransEntry 3 } gDot1qVlanTransNewPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The priority field of vlan translation table." --VLAN转换表中的报文优先级字段 ::= { gDot1qVlanTransEntry 4 } gDot1qVlanTransStatus OBJECT-TYPE SYNTAX INTEGER { active(1), createAndGo(2), destroy(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qVlanTransEntry 5 } -- ------------------------------------------------------------- -- gDot1qExtend other -- ------------------------------------------------------------- gDot1qVlanSubnetPrecede OBJECT-TYPE SYNTAX INTEGER{ true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to config whether the IP-Subnet Based VLAN has a higher precedence than the MAC Based VLAN." --用于配置是否基于ip的vlan比基于MAC的vlan具有更高的优先级 ::= { gDot1qExtend 9 } gDot1qVlanTransEnable OBJECT-TYPE SYNTAX INTEGER{ true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to config current vlan-translation's status." --vlan转换的使能开关 ::= { gDot1qExtend 10 } -- ------------------------------------------------------------- -- The Stack VLAN Database -- ------------------------------------------------------------- gDot1qStackVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qStackVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing stack vlan configuration information for each stack vlan configured into the device by management." --该表用于显示和配置Stack VLAN相关的信息. ::={ gDot1qExtend 11 } gDot1qStackVlanEntry OBJECT-TYPE SYNTAX GarpDot1qStackVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling stack VLAN configuration for a port on the device. This is indexed by port and end vlan id." --Stack VLAN表项,以端口号和结束VLAN ID为索引. INDEX { gDot1qStackVlanPort, gDot1qEndStackVlan } ::= { gDot1qStackVlanTable 1 } GarpDot1qStackVlanEntry ::= SEQUENCE { gDot1qStackVlanPort INTEGER, gDot1qStartStackVlan INTEGER, gDot1qEndStackVlan INTEGER, gDot1qTargetStackVlan INTEGER, gDot1qStackVlanRowStatus RowStatus } gDot1qStackVlanPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of stack vlan." --Stack VLAN的索引. ::={ gDot1qStackVlanEntry 1 } gDot1qStartStackVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The start vlan of the serial vlans we want to insert a new vlan tag." --Stack VLAN范围的起始VLAN ID. ::={ gDot1qStackVlanEntry 2 } gDot1qEndStackVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The end vlan of the serial vlans we want to insert a new vlan tag." --Stack VLAN范围的结束VLAN ID. ::={ gDot1qStackVlanEntry 3 } gDot1qTargetStackVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The target vlan of the serial vlans we want to insert." --要插入的目标VLAN ID. ::={ gDot1qStackVlanEntry 4 } gDot1qStackVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Describe the oprations for the entry:4-create 6-delete" --设置Stack VLAN:4-添加 6-删除. ::= { gDot1qStackVlanEntry 5 } -- ------------------------------------------------------------- -- The VLAN Passthrough Database -- ------------------------------------------------------------- gDot1qVlanPassthroughTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanPassthroughEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing vlan passthrough configuration information for each vlan passthrough configured into the device by management." --该表用于显示和配置VLAN透传相关的信息. ::={ gDot1qExtend 12 } gDot1qVlanPassthroughEntry OBJECT-TYPE SYNTAX GarpDot1qVlanPassthroughEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling VLAN passthrough configuration for a port on the device. This is indexed by port and end vlan id." --VLAN透传表项,以端口号和结束VLAN ID为索引. INDEX { gDot1qPassthroughPort, gDot1qEndPassthroughVlan } ::= { gDot1qVlanPassthroughTable 1 } GarpDot1qVlanPassthroughEntry ::= SEQUENCE { gDot1qPassthroughPort INTEGER, gDot1qStartPassthroughVlan INTEGER, gDot1qEndPassthroughVlan INTEGER, gDot1qPassthroughRowStatus RowStatus } gDot1qPassthroughPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of passthrough entry." --VLAN透传的索引 ::={ gDot1qVlanPassthroughEntry 1 } gDot1qStartPassthroughVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The start vlan of the serial vlans we want to passthrough." --配置VLAN透传范围的起始VLAN ::={ gDot1qVlanPassthroughEntry 2 } gDot1qEndPassthroughVlan OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The end vlan of the serial vlans we want to passthrough. " --配置VLAN透传范围的结束VLAN ::={ gDot1qVlanPassthroughEntry 3 } gDot1qPassthroughRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Describe the oprations for the entry:4-create 6-delete." --设置VLAN透传:4-添加 6-删除. ::= { gDot1qVlanPassthroughEntry 4 } -- ------------------------------------------------------------- -- The VLAN SWAP Database -- ------------------------------------------------------------- gDot1qVlanSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF GarpDot1qVlanSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing vlan swap configuration information for each vlan swap configured into the device by management." --该表用于显示和配置VLAN交换相关的信息. ::={ gDot1qExtend 13 } gDot1qVlanSwapEntry OBJECT-TYPE SYNTAX GarpDot1qVlanSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling VLAN swap configuration for a port on the device. This is indexed by port and end vlan id." --VLAN交换表项,以端口号和结束VLAN ID为索引. INDEX { gDot1qVlanSwapPort, gDot1qEndSwapVlan } ::= { gDot1qVlanSwapTable 1 } GarpDot1qVlanSwapEntry ::= SEQUENCE { gDot1qVlanSwapPort INTEGER, gDot1qStartSwapVlan INTEGER, gDot1qEndSwapVlan INTEGER, gDot1qTargetSwapVlan INTEGER, gDot1qVlanSwapRowStatus RowStatus } gDot1qVlanSwapPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of vlan swap entry." --VLAN交换的索引 ::={ gDot1qVlanSwapEntry 1 } gDot1qStartSwapVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The start vlan of the serial vlans we want to swap." --配置VLAN交换范围的起始VLAN ::={ gDot1qVlanSwapEntry 2 } gDot1qEndSwapVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The end vlan of the serial vlans we want to swap. " --配置VLAN交换范围的结束VLAN ::={ gDot1qVlanSwapEntry 3 } gDot1qTargetSwapVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The target vlan of the serial vlans we want to swap." --要交换的目标VLAN ID. ::={ gDot1qVlanSwapEntry 4 } gDot1qVlanSwapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Describe the oprations for the entry:4-create 6-delete." --设置VLAN交换:4-添加 6-删除. ::= { gDot1qVlanSwapEntry 5 } ---在marvell芯片中使用 gDot1qProtocolVlan OBJECT IDENTIFIER ::= { gDot1qExtend 14 } gDot1qProtocolVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" --该表用于基于报文的协议字段为报文进行分类，在marvell芯片中使用 ::= { gDot1qProtocolVlan 1 } gDot1qProtocolVlanEntry OBJECT-TYPE SYNTAX GDot1qProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan protocol table entry." --基于协议的vlan表的表项 INDEX { protocolVlanTableIndex } ::= { gDot1qProtocolVlanTable 1 } GDot1qProtocolVlanEntry ::= SEQUENCE { protocolVlanTableIndex INTEGER, protocolVlanTableEthertype INTEGER, protocolVlanTableProtocol INTEGER, protocolVlanTableStatus RowStatus } protocolVlanTableIndex OBJECT-TYPE SYNTAX INTEGER(0..11) MAX-ACCESS read-only STATUS current DESCRIPTION "index of vlan protocol entry." --基于协议的vlan表的索引. ::= { gDot1qProtocolVlanEntry 1 } protocolVlanTableEthertype OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "ether type of packet." --报文的以太网类型. ::= { gDot1qProtocolVlanEntry 2 } protocolVlanTableProtocol OBJECT-TYPE SYNTAX INTEGER{ ethernetv2(1), non-snap-llc(2), ethernetv2-non-snap-llc(3), snap-llc(4), ethernetv2-snap-llc(5), non-snap-llc-snap-llc(6), ethernetv2-non-snap-llc-snap-llc(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc." --报文的协议类型，位0表示ethernetv2，位1表示non-snap-llc，位2表示snap-llc ::= { gDot1qProtocolVlanEntry 3 } protocolVlanTableStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qProtocolVlanEntry 4 } gDot1qProtocolVlanActionTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qProtocolVlanActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip" --该表用于基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用 ::= { gDot1qProtocolVlan 2 } gDot1qProtocolVlanActionEntry OBJECT-TYPE SYNTAX GDot1qProtocolVlanActionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan protocol aciton table entry." --基于协议的vlan动作表的表项 INDEX { protocolVlanAcitonTablePort, protocolVlanTableIndex} ::= { gDot1qProtocolVlanActionTable 1 } GDot1qProtocolVlanActionEntry ::= SEQUENCE { protocolVlanAcitonTablePort INTEGER, protocolVlanActionTableNewVlan VlanId, protocolVlanActionTableStatus RowStatus } protocolVlanAcitonTablePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port index." --端口索引 ::= { gDot1qProtocolVlanActionEntry 1 } protocolVlanActionTableNewVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "new vlan id of packet." --报文新的VLAN号. ::= { gDot1qProtocolVlanActionEntry 2 } protocolVlanActionTableStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "table entry status." --表项的状态 ::= { gDot1qProtocolVlanActionEntry 3 } gDot1qProtocolVlanAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qProtocolVlanAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to enable assign a VLAN for a packet based on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip" --该表用于使能基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用 ::= { gDot1qProtocolVlan 3 } gDot1qProtocolVlanAdminEntry OBJECT-TYPE SYNTAX GDot1qProtocolVlanAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a vlan protocol admin table entry." --使能基于协议的vlan表的表项 INDEX { protocolVlanAdminTablePort } ::= { gDot1qProtocolVlanAdminTable 1 } GDot1qProtocolVlanAdminEntry ::= SEQUENCE { protocolVlanAdminTablePort INTEGER, protocolVlanAdminTableEnable TruthValue, } protocolVlanAdminTablePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port index." --端口索引 ::= { gDot1qProtocolVlanAdminEntry 1 } protocolVlanAdminTableEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable protocol-based vlan function of a port." --使能端口的基于协议的VLAN功能. ::= { gDot1qProtocolVlanAdminEntry 2 } gDot1qTranslateVlan OBJECT IDENTIFIER ::= { gDot1qExtend 15 } gDot1qTranslateVlanIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qTranslateVlanIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" --替换vlan全局表项 ::= { gDot1qTranslateVlan 1 } gDot1qTranslateVlanIngressEntry OBJECT-TYPE SYNTAX GDot1qTranslateVlanIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of ingress vlan translate." --入口vlan替换表项 INDEX { translateVlanIngressTableIndex } ::= { gDot1qTranslateVlanIngressTable 1 } GDot1qTranslateVlanIngressEntry ::= SEQUENCE { translateVlanIngressTableIndex INTEGER, translateIngressTargetVlanID INTEGER, } translateVlanIngressTableIndex OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "index of ingress vlan." --入口VLAN 索引. ::= { gDot1qTranslateVlanIngressEntry 1 } translateIngressTargetVlanID OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Target vlan ID. 0 means not set" --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同 ::= { gDot1qTranslateVlanIngressEntry 2 } gDot1qTranslateVlanEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qTranslateVlanEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip" --替换vlan全局表项 ::= { gDot1qTranslateVlan 2 } gDot1qTranslateVlanEgressEntry OBJECT-TYPE SYNTAX GDot1qTranslateVlanEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "entry of Egress vlan translate." --出口vlan替换表项 INDEX { translateVlanEgressTableIndex } ::= { gDot1qTranslateVlanEgressTable 1 } GDot1qTranslateVlanEgressEntry ::= SEQUENCE { translateVlanEgressTableIndex INTEGER, translateEgressTargetVlanID INTEGER, } translateVlanEgressTableIndex OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "index of Egress vlan." --出口VLAN 索引. ::= { gDot1qTranslateVlanEgressEntry 1 } translateEgressTargetVlanID OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Target vlan ID. 0 means not set" --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同 ::= { gDot1qTranslateVlanEgressEntry 2 } gDot1qTranslateVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF GDot1qTranslateVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "translate vlan port list" --替换vlan端口开启列表 ::= { gDot1qTranslateVlan 3 } gDot1qTranslateVlanPortEntry OBJECT-TYPE SYNTAX GDot1qTranslateVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "port entry of vlan translate." --vlan替换端口使能表项 INDEX { translateVlanTablePort } ::= { gDot1qTranslateVlanPortTable 1 } GDot1qTranslateVlanPortEntry ::= SEQUENCE { translateVlanTablePort INTEGER, translateTargetVlanIngressTableEnable TruthValue, translateTargetVlanEgressTableEnable TruthValue } translateVlanTablePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port index." --端口索引 ::= { gDot1qTranslateVlanPortEntry 1 } translateTargetVlanIngressTableEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable ingress Translate vlan function of a port.1:enable;2:disable" --使能入端口的VLAN替换功能 1表示使能，2表示禁止. ::= { gDot1qTranslateVlanPortEntry 2 } translateTargetVlanEgressTableEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable Egress Translate vlan function of a port.1:enable;2:disable" --使能出端口的VLAN替换功能 1表示使能，2表示禁止. ::= { gDot1qTranslateVlanPortEntry 3 } -- ------------------------------------------------------------- -- GARP MIB - compliance statements -- ------------------------------------------------------------- garpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the GARP module." MODULE MANDATORY-GROUPS { garpMIBBaseGroup } ::= { garpMIBCompliances 1 } END