------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- -- File : bcm5600-oem.mi2 -- Description : GBN OEM Product Enterprise MIB -- Version : 0.03 -- Date : May 03, 2001 -- Copyright (c) 2002-2005 admin Systems, Inc. All Rights Reserved. ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ GBNDeviceOEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64 FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnDevice FROM ADMIN-MASTER-MIB PortList FROM Q-BRIDGE-MIB; bcm5600 MODULE-IDENTITY LAST-UPDATED "0105030000Z" -- May 03,2001 ORGANIZATION "Admin Systems, Inc." CONTACT-INFO "Admin Systems, Inc. E-mail: support@admin.com.cn" DESCRIPTION "GBN Broadcom BCM5600 StrataSwitch OEM-Product Enterprise MIB definition." REVISION "0105030000Z" -- May 03,2001 DESCRIPTION "Initial MIB creation." ::= { gbnDevice 3 } ------------------------------------------------------------------------------ -- Textual Conventions (i.e., these do not affect object encoding): ------------------------------------------------------------------------------ -- -- "DURABLE": -- Objects that are saved across a system reset and/or power cycle -- are noted as "DURABLE" for convenience in the DESCRIPTION -- section of the object definition. Code must be explicitly -- written to implement these DURABLE objects. -- ------------------------------------------------------------------------------ -- define groups in OEM-BCM5600-MIB ------------------------------------------------------------------------------ oemArchIface OBJECT IDENTIFIER ::= { bcm5600 1 } oemChip OBJECT IDENTIFIER ::= { bcm5600 2 } oemProdConformance OBJECT IDENTIFIER ::= { bcm5600 3 } oemProdGroups OBJECT IDENTIFIER ::= { oemProdConformance 1 } oemProdCompliances OBJECT IDENTIFIER ::= { oemProdConformance 2 } ------------------------------------------------------------------------------ oemArchIfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF OemArchIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { oemArchIface 1 } oemArchIfaceEntry OBJECT-TYPE SYNTAX OemArchIfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { oemArchIfaceUnit, oemArchIfacePort } ::= { oemArchIfaceTable 1 } OemArchIfaceEntry ::= SEQUENCE { oemArchIfaceUnit Integer32, oemArchIfacePort Integer32, oemArchIfaceLLWHPort Integer32, oemArchIfaceIfIndex Integer32, oemArchIfaceName DisplayString, oemArchIfaceEnable TruthValue, oemArchIfaceSTPEnable TruthValue, oemArchIfaceLink INTEGER, oemArchIfaceDuplexSpeedSet INTEGER, oemArchIfaceDuplexSpeedGet INTEGER, oemArchIfacePortLoop INTEGER, oemArchIfaceFlowControl INTEGER, oemArchIfaceTxVlanTagPkts Counter64, oemArchIfaceTxL3Pkts Counter64, oemArchIfaceTxL3AbortedPkts Counter64, oemArchIfaceRxIpInHdrErrors Counter64, oemArchIfaceL2Tunneling INTEGER, oemArchIfaceLinkUpTime Integer32, oemArchIfaceMasterMode INTEGER } oemArchIfaceUnit OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies a unit in the TiNet Switch stack. If an invalid value is used for the index, a SNMP 'noSuchName' error (SNMPv1) or 'noSuchInstance' exception (SNMPv2/v3) is returned. For implementations that do not support stacking, the same response is returned for any unit index other than 1." ::= { oemArchIfaceEntry 1 } oemArchIfacePort OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) within the oemArchIfaceUnit." ::= { oemArchIfaceEntry 2 } oemArchIfaceLLWHPort OBJECT-TYPE SYNTAX Integer32 (8193..8296) MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) in the GBN BCM5600 stack. This is a 'Layered Linear With Holes' (LLWH) port number that may may have holes for missing ports or units. For this MIB, 26 port numbers are reserved for each unit in the stack. For example, LLHW port 8193 is unit 1, port 1 ." ::= { oemArchIfaceEntry 3 } oemArchIfaceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of this GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator). Note that an ifIndex value of 34603009 (0x02100001) represents the Aggregator layer, unit 1, slot 0 (base unit ports), port 1." ::= { oemArchIfaceEntry 4 } oemArchIfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The textual name of this interface, e.g., 'John'." ::= { oemArchIfaceEntry 5 } oemArchIfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { true:all } This object is true(1) when this interface is enabled and false(1) when it is disabled. For this product, this is the ONLY way to enable or disable this interface. Note that 'ifAdminStatus' in RFC1213 and RFC2233 and 'dot1dStpPortEnable' in RFC1493 are each implemented as 'read-only'." ::= { oemArchIfaceEntry 6 } oemArchIfaceSTPEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { true:all } This object is true(1) when Spanning Tree operation is enabled for this interface and false(2) when it is disabled." ::= { oemArchIfaceEntry 7 } oemArchIfaceLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of Link Detect on this interface." ::= { oemArchIfaceEntry 8 } oemArchIfaceDuplexSpeedSet OBJECT-TYPE SYNTAX INTEGER { autonegotiate(1), half-10(2), full-10(3), half-100(4), full-100(5), half-1000(6), full-1000(7), auto-10(8), auto-100(9), auto-1000(10), full-10000(11), illegal(99), full-2500(13), } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { autonegotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the default of autonegotiate(1), then the application initializes the port to a valid value (e.g., 1000full(6)). Note that not all controls are possible for all interfaces. For example, only full-1000(6) is available for Gigabit Ethernet interfaces." ::= { oemArchIfaceEntry 9 } oemArchIfaceDuplexSpeedGet OBJECT-TYPE SYNTAX INTEGER { unknown(1), half-10(2), full-10(3), half-100(4), full-100(5), half-1000(6), full-1000(7), auto10(8), auto100(9), auto1000(10), full-10000(11), illegal(99), full-2500(13), } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is returned when the 'oemArchIfaceLink' indicates down(2) for this interface." ::= { oemArchIfaceEntry 10 } oemArchIfacePortLoop OBJECT-TYPE SYNTAX INTEGER { internalEnable(1), externalEnable(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of Link Detect on this interface." ::= { oemArchIfaceEntry 11 } oemArchIfaceFlowControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enable } Set the flow control on the interface to enable(1) or disable(2)." ::= { oemArchIfaceEntry 12 } oemArchIfaceTxVlanTagPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VLAN tagged packets transmitted on this interface." ::= { oemArchIfaceEntry 13 } oemArchIfaceTxL3Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Layer 3 packets transmitted on this interface." ::= { oemArchIfaceEntry 14 } oemArchIfaceTxL3AbortedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Layer 3 transmit packets aborted on this interface." ::= { oemArchIfaceEntry 15 } oemArchIfaceRxIpInHdrErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Layer 3 packets received on this interface that were discarded due to IP header errors (e.g., bad checksum, invalid versions, format errors)." ::= { oemArchIfaceEntry 16 } oemArchIfaceL2Tunneling OBJECT-TYPE SYNTAX INTEGER(1..63) MAX-ACCESS read-write STATUS current DESCRIPTION "When l2 entities (such as STP bridges) conneted across a VPN network, l2 PDUs need delivering through VPN without being processed.To achieve this, users need enbling l2- tunneling on VPN's edge ports, i.e. ports connected to customer bridges. One 32bits width integer variable is used for each port to represent what kind of PDUs need tunneling when coming in this ports.Notes, only the six least-significant bits are used here ,each bit corresponds to one protocol, following is the detail: bit0 <----> CDP bit1 <----> LACP bit2 <----> PAGP bit3 <----> STP bit4 <----> UDLD bit5 <----> VTP bit6-bit31 <--> reserved. when set one, corresponding PDU tunneling is asserted, deasserted otherwise." ::= { oemArchIfaceEntry 17 } oemArchIfaceLinkUpTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of linkup on this interface. The unit is second." ::= { oemArchIfaceEntry 18 } oemArchIfaceMasterMode OBJECT-TYPE SYNTAX INTEGER { slave(0), master(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The master/slave mode on this interface." ::= { oemArchIfaceEntry 19 } ------------------------------------------------------------------------------ -- Chip Interface Section ------------------------------------------------------------------------------ -- oemChipStub OBJECT-TYPE SYNTAX INTEGER { noop(1), chip-value2(2), chip-value3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is a place holder for the OEM Chip interface." ::= { oemChip 1 } ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- conformance information ------------------------------------------------------------------------------ -- -------------------------------------------------------------------------- -- units of conformance -- -------------------------------------------------------------------------- oemArchIfaceGroup OBJECT-GROUP OBJECTS { oemArchIfaceLLWHPort, oemArchIfaceIfIndex, oemArchIfaceName, oemArchIfaceEnable, oemArchIfaceSTPEnable, oemArchIfaceLink, oemArchIfaceDuplexSpeedSet, oemArchIfaceDuplexSpeedGet, oemArchIfacePortLoop, oemArchIfaceFlowControl, oemArchIfaceTxVlanTagPkts, oemArchIfaceTxL3Pkts, oemArchIfaceTxL3AbortedPkts, oemArchIfaceRxIpInHdrErrors } STATUS current DESCRIPTION "This group configures and retrieves Architecture interface specific objects." ::= { oemProdGroups 1 } oemChipGroup OBJECT-GROUP OBJECTS { oemChipStub } STATUS current DESCRIPTION "This group configures OEM Chip specific objects." ::= { oemProdGroups 2 } -- -------------------------------------------------------------------------- -- compliance statements -- -------------------------------------------------------------------------- oemProdCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement." MODULE -- this module MANDATORY-GROUPS { oemArchIfaceGroup } GROUP oemChipGroup DESCRIPTION "This group is optional." ::= { oemProdCompliances 1 } -- -- END of OEM-BCM5600-MIB -- END