GBNDeviceSwitch-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TruthValue,DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnDevice FROM ADMIN-MASTER-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB VlanIndex FROM Q-BRIDGE-MIB PortList, dot1qStaticMulticastEntry FROM Q-BRIDGE-MIB; gbnDeviceSwitch MODULE-IDENTITY LAST-UPDATED "0011020000Z" -- November 2, 2000 ORGANIZATION "Admin Co., Ltd." CONTACT-INFO "Admin Co., Ltd. E-mail: support@admin.com" DESCRIPTION "ADMIN Common Enterprise MIB definition." REVISION "0011020000Z" -- November 2, 2000 DESCRIPTION "Initial MIB creation." ::= { gbnDevice 1 } MirrorMacType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "null、destination、source" SYNTAX INTEGER { null(0), destination (1), source(2) } ------------------------------------------------------------------------------ -- define groups in gbnDeviceSwitch-MIB ------------------------------------------------------------------------------ gbnDeviceSwitchMirror OBJECT IDENTIFIER ::= { gbnDeviceSwitch 1 } gbnDeviceSwitchPort OBJECT IDENTIFIER ::= { gbnDeviceSwitch 2 } gbnDeviceSwitchAggregation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 3 } gbnDeviceSwitchL3 OBJECT IDENTIFIER ::= { gbnDeviceSwitch 4 } gbnDeviceSwitchLoopTest OBJECT IDENTIFIER ::= { gbnDeviceSwitch 5 } gbnDeviceSwitchSRM OBJECT IDENTIFIER ::= { gbnDeviceSwitch 6 } gbnDeviceSwitchFlowAlarm OBJECT IDENTIFIER ::= { gbnDeviceSwitch 7 } gbnDeviceSwitchQueneScheduer OBJECT IDENTIFIER ::= { gbnDeviceSwitch 8 } gbnDeviceSwitchLineRate OBJECT IDENTIFIER ::= { gbnDeviceSwitch 9 } gbnDeviceSwitchPortIsolation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 10 } gbnDeviceSwitchStormControl OBJECT IDENTIFIER ::= { gbnDeviceSwitch 11 } gbnDeviceSwitchAntiDos OBJECT IDENTIFIER ::= { gbnDeviceSwitch 12 } gbnDeviceSwitchBandWidth OBJECT IDENTIFIER ::= { gbnDeviceSwitch 13 } gbnDeviceSwitchHigigStatistics OBJECT IDENTIFIER ::= { gbnDeviceSwitch 14 } gbnDeviceSwitchChannelStats OBJECT IDENTIFIER ::= { gbnDeviceSwitch 15 } gbnDeviceSwitchRmoteMirror OBJECT IDENTIFIER ::= { gbnDeviceSwitch 16 } gbnDeviceSwitchPortSFPInfo OBJECT IDENTIFIER ::= { gbnDeviceSwitch 17 } gbnDeviceSwitchPortAvgRate OBJECT IDENTIFIER ::= { gbnDeviceSwitch 18 } gbnDeviceSwitchPortbandwidthUtilization OBJECT IDENTIFIER ::= { gbnDeviceSwitch 19 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchMirror - Mirror Group -- ------------------------------------------------------------------------------ mirroringPort OBJECT-TYPE SYNTAX INTEGER (0..26) MAX-ACCESS read-write STATUS current DESCRIPTION "This port which all packets send to." ::= { gbnDeviceSwitchMirror 1 } mirroredEgrPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The egress ports which need to monitor." ::= { gbnDeviceSwitchMirror 2 } mirroredIgrPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The ingress ports which need to monitor." ::= { gbnDeviceSwitchMirror 3 } ingressMirrorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address which will be compared with the ingress frame, Only the matched frame will be mirrored" --用于匹配ingress报文的MAC地址 ::= { gbnDeviceSwitchMirror 4 } egressMirrorMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address which will be compared with the egress frame, Only the matched frame will be mirrored" --用于匹配egress报文的MAC地址 ::= { gbnDeviceSwitchMirror 5 } ingressMirrorMacType OBJECT-TYPE SYNTAX MirrorMacType MAX-ACCESS read-write STATUS current DESCRIPTION "The destination or source MAC address which will be compared with the ingress frame" --指定用于匹配ingress报文的是目的还是源MAC地址 ::= { gbnDeviceSwitchMirror 6 } egressMirrorMacType OBJECT-TYPE SYNTAX MirrorMacType MAX-ACCESS read-write STATUS current DESCRIPTION "The destination or source MAC address which will be compared with the egress frame" --指定用于匹配egress报文的是目的还是源MAC地址 ::= { gbnDeviceSwitchMirror 7 } ingressMirrorDivider OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "the mirror sampling divider" --ingress报文的采样值 ::= { gbnDeviceSwitchMirror 8 } egressMirrorDivider OBJECT-TYPE SYNTAX INTEGER(0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "the mirror sampling divider" --egress报文的采样值 ::= { gbnDeviceSwitchMirror 9 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchPort - Port Group -- ------------------------------------------------------------------------------ portTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchPort 1 } portTypeEntry OBJECT-TYPE SYNTAX PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { portNumber } ::= { portTypeTable 1 } PortTypeEntry ::= SEQUENCE { portNumber INTEGER, portType INTEGER } portNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "the index of port." ::= { portTypeEntry 1 } portType OBJECT-TYPE SYNTAX INTEGER { blank(1), FE(2), single100FX(3), double100FX(4), single1000FX(5), double1000FX(6), fE1000(7), cpu(8), FX10000(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "端口类型:1为不存在；2为10/100M电口；3为100M单模光口； 4为100M多模光口；5为1000M光口；6为1000M光口； 7为1000M电口; 8为CPU接口;9为10000M光口" ::= { portTypeEntry 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchAggregation - Port Trunk Group -- ------------------------------------------------------------------------------ aggTable OBJECT-TYPE SYNTAX SEQUENCE OF AggEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains information about every Aggregator that is associated with this System." ::= { gbnDeviceSwitchAggregation 1 } aggEntry OBJECT-TYPE SYNTAX AggEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator." INDEX { aggUnit, aggPort } ::= { aggTable 1 } AggEntry ::= SEQUENCE { aggUnit INTEGER, aggPort INTEGER, aggPortListPorts PortList, aggRule INTEGER, aggRowstatus RowStatus } aggUnit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The Interface Unit of the Aggregation." ::= { aggEntry 1 } aggPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The MasterPort of the Aggregation." ::= { aggEntry 2 } aggPortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation." ::= { aggEntry 3 } aggRule OBJECT-TYPE SYNTAX INTEGER { srcMAC(1), destMAC(2), srcXORDestMAC(3), srcIP(4), destIP(5), srcXORDestIP(6) } ACCESS read-write STATUS obsolete DESCRIPTION " The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link." ::= { aggEntry 4 } aggRowstatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "rowstatus of trunk." ::= { aggEntry 5 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchL3 - L3 Group -- ------------------------------------------------------------------------------ l3Table OBJECT-TYPE SYNTAX SEQUENCE OF L3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "此表为交换芯片的L3表项内容。" ::= { gbnDeviceSwitchL3 1 } l3Entry OBJECT-TYPE SYNTAX L3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "交换芯片的L3表项，此表为只读。" INDEX { l3IpAddress } ::= { l3Table 1 } L3Entry ::= SEQUENCE { l3IpAddress IpAddress, l3NextHopMacAddress MacAddress, l3Vlan VlanIndex, l3Port INTEGER, l3CreateTime DateAndTime, l3UpdateTime DateAndTime } l3IpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "目的IP地址，作为索引。" ::= { l3Entry 1 } l3NextHopMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "下一跳IP的MAC地址。" ::= { l3Entry 2 } l3Vlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "下一跳IP所在的VLAN。" ::= { l3Entry 3 } l3Port OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "报文的出端口。" ::= { l3Entry 4 } l3CreateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Create Time,such as 2004-07-29,13:30:15.0" ::= { l3Entry 5 } l3UpdateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Update Time,such as 2004-07-29,13:30:15.0" ::= { l3Entry 6 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchLoopTest - Loop Test Group -- ------------------------------------------------------------------------------ loopTestPortno OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "port bitmap:Numbers of the port to be tested. The highest bit is port 1, the second bit is port 2, and so on." ::= { gbnDeviceSwitchLoopTest 1 } loopTestType OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation local(2), -- for both vdsl and ethernet port remote(3), -- for both vdsl and ethernet port other(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 4 } Setting this object to 2-4 enables loop back test. Setting it to 1 disables loop back test." ::= { gbnDeviceSwitchLoopTest 2 } loopTestSuccess OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "if the highest bit is 0:the port 1 loop fail, 1,the port 1 loop success, and so on. " ::= { gbnDeviceSwitchLoopTest 3 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchSRM - SRM Group -- ------------------------------------------------------------------------------ srmHardwareEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add network routes to hardware table or not.Default is enable." -- "是否下发网段路由到硬件表中。默认为下发。" ::= { gbnDeviceSwitchSRM 1 } srmHardwareDEFCPU OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The DEF routes goes to CPU." -- "硬件查找失败的路由发送到CPU，此功能只有TiNet S3750支持，默认为disable" ::= { gbnDeviceSwitchSRM 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchFlowAlarm - Port Flow Alarm Group -- ------------------------------------------------------------------------------ portFlowAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF PortFlowAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of port flow alarm." --端口流量告警表 ::= { gbnDeviceSwitchFlowAlarm 1 } portFlowAlarmEntry OBJECT-TYPE SYNTAX PortFlowAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port flow alarm." --端口流量告警列表 INDEX { portFlowAlarmPort } ::= { portFlowAlarmTable 1 } PortFlowAlarmEntry ::= SEQUENCE { portFlowAlarmPort Integer32, portFlowAlarmEnable TruthValue, portFlowAlarmExceedStatus TruthValue, portFlowAlarmExceedThreshold Integer32, portFlowAlarmNormalThreshold Integer32 } portFlowAlarmPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number." --端口号，端口流量告警表的索引值 ::= { portFlowAlarmEntry 1 } portFlowAlarmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the port flow alarm" --端口流量告警开启/关闭状态 ::= { portFlowAlarmEntry 2 } portFlowAlarmExceedStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The exceed status of the port flow alarm" --端口流量告警流量状态 ::= { portFlowAlarmEntry 3 } portFlowAlarmExceedThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The exceed threshold of port flow alarm." --端口流量过大的阈值 ::= { portFlowAlarmEntry 4 } portFlowAlarmNormalThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The normal threshold of port flow alarm." --端口流量正常的阈值 ::= { portFlowAlarmEntry 5 } portFlowAlarmGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The global enable status of port flow alarm." --全局端口流量告警开启/关闭状态 ::= { gbnDeviceSwitchFlowAlarm 2 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchTrap - gbn device switch TRAP -- ------------------------------------------------------------------------------ portFlowAlarmTrap OBJECT IDENTIFIER ::= { gbnDeviceSwitchFlowAlarm 5 } portFlowAlarmExceedTrap NOTIFICATION-TYPE OBJECTS { portFlowAlarmPort } STATUS current DESCRIPTION "Port ingress packet rate become too big, port flow exceed alarm happen." ::= { portFlowAlarmTrap 1 } portFlowAlarmNormalTrap NOTIFICATION-TYPE OBJECTS { portFlowAlarmPort } STATUS current DESCRIPTION "Port ingress packet rate become normal, port flow normal alarm happen." --如果端口进来的报文速率恢复正常，则发出端口速率正常的trap ::= { portFlowAlarmTrap 2 } -- the quene-scheduer QOS qosQueueSchedulerGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchQueneScheduer 1 } qosWrrQueue1Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 1th queue(%). for 3650, the range is 1 to 255, for 3750-24/48,the range is 1 to 15." --队列1的权重。对于3650，范围为1到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 1 } qosWrrQueue2Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 2th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列2的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 2 } qosWrrQueue3Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 3th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列3的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 3 } qosWrrQueue4Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 4th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列4的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 4 } qosWrrMaxDelayValue OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS current DESCRIPTION "the maximum allowable latency for packet transmission on the priorest COS" --队列调度时最高优先级的队列最长等待时间 ::= { qosQueueSchedulerGroup 5 } qosQueueSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority (1), wrr(2), sp-wrr(3) } ACCESS read-write STATUS current DESCRIPTION "queue scheduler mode: strict priority, weighted round robin, strict priority+weighted round robin" --队列调度模式:绝对优先级、加权轮循调度 DEFVAL { strictPriority } ::= { qosQueueSchedulerGroup 6 } qosWrrQueue5Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 5th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列5的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 7 } qosWrrQueue6Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 6th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列6的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 8 } qosWrrQueue7Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 7th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列7的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 9 } qosWrrQueue8Weight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "Weight of 8th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." --队列8的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 ::= { qosQueueSchedulerGroup 10 } qosLineRateTable OBJECT-TYPE SYNTAX SEQUENCE OF QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " --端口限速入口表 ::= { gbnDeviceSwitchLineRate 1 } qosLineRateEntry OBJECT-TYPE SYNTAX QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " --端口限速入口 INDEX { qosLineRateInterface } ::= { qosLineRateTable 1 } QosLineRateEntry ::= SEQUENCE { qosLineRateInterface INTEGER, qosLineRateTargetRate INTEGER, qosLineRateTargetBurst INTEGER, qosLineRateTargetRateIngress INTEGER, qosLineRateRowStatus RowStatus } qosLineRateInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the line rate interface. " --端口限速端口 ::= { qosLineRateEntry 1 } qosLineRateTargetRate OBJECT-TYPE SYNTAX INTEGER (64..1000000) ACCESS read-write STATUS current DESCRIPTION "The target rate(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps " --端口限速目标速率(Kbps),必须是64Kbps的倍数 ::= { qosLineRateEntry 2 } qosLineRateTargetBurst OBJECT-TYPE SYNTAX INTEGER (64..1000000) ACCESS read-write STATUS current DESCRIPTION "The target burst(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps " --端口限速允许突发速率(Kbps),必须是64Kbps的倍数 ::= { qosLineRateEntry 3 } qosLineRateTargetRateIngress OBJECT-TYPE SYNTAX INTEGER (0..1024000) ACCESS read-write STATUS current DESCRIPTION "The ingress target rate(Kbps) of the line-rate QOS.0 means disable" --入口端口限速目标速率(Kbps) ::= { qosLineRateEntry 4 } portIsolationGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchPortIsolation 1 } portIsolationDownLinkPorts OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS current DESCRIPTION "port isolation down link portlist" -- 端口隔离的下行端口列表 -- ::= { portIsolationGroup 1 } portIsolationUpLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF PortIsolationUpLinkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of uplink-ports of portisolation entries. conflict with portIsolationDownLinkPorts." --基于端口的端口隔离上行口列表，不能够跟portIsolationDownLinkPorts同时使用 ::= { portIsolationGroup 2 } portIsolationUpLinkEntry OBJECT-TYPE SYNTAX PortIsolationUpLinkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of uplink-ports of portisolation entries. " --基于端口的端口隔离上行口列表 INDEX { portisolationInterface } ::= { portIsolationUpLinkTable 1 } PortIsolationUpLinkEntry ::= SEQUENCE { portisolationInterface INTEGER, portisolationUplinkList PortList } portisolationInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "port index, start from 1. " --端口索引 ::= { portIsolationUpLinkEntry 1 } portisolationUplinkList OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS current DESCRIPTION "portlist of uplink ports,when configured , a port can only communicate with it's uplink ports. " --上行口列表，当配置后，端口只允许跟它的上行口通信 ::= { portIsolationUpLinkEntry 2 } stormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " --风暴控制入口表 ::= { gbnDeviceSwitchStormControl 1 } stormControlEntry OBJECT-TYPE SYNTAX StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " --风暴控制入口 INDEX { stormControlInterface, stormControlType } ::= { stormControlTable 1 } StormControlEntry ::= SEQUENCE { stormControlInterface INTEGER, stormControlType INTEGER, stormControlTargetRate INTEGER, stormControlRowStatus RowStatus, stormControlMode INTEGER } stormControlInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the storm control interface. " --风暴控制端口 ::= { stormControlEntry 1 } stormControlType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the pack flow type of the storm control. " --风暴控制报文流类型 ::= { stormControlEntry 2 } stormControlTargetRate OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS current DESCRIPTION "the target rate of the storm control. " --风暴控制目标速率 ::= { stormControlEntry 3 } stormControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status of the storm control" --风暴控制行状态 ::= { stormControlEntry 4 } stormControlMode OBJECT-TYPE SYNTAX INTEGER { pps(0), bps(1) } ACCESS read-write STATUS current DESCRIPTION "the mode of the storm control. " ::= { stormControlEntry 5 } ipfragmnetnumber OBJECT-TYPE SYNTAX INTEGER (0..800) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragment number." ::= { gbnDeviceSwitchAntiDos 1 } ipTTL OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control IP with TTL=0 packet,default is not traffic to the CPU." --控制TTL=0的报文是否送往CPU,默认情况是关闭上报CPU. ::= { gbnDeviceSwitchAntiDos 2 } bandwidthcontrolTable OBJECT-TYPE SYNTAX SEQUENCE OF BandwidthcontrolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchBandWidth 1 } bandwidthcontrolEntry OBJECT-TYPE SYNTAX BandwidthcontrolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { controlPort } ::= { bandwidthcontrolTable 1 } BandwidthcontrolEntry ::= SEQUENCE { controlPort INTEGER, portEgressBandwidthcontrol INTEGER, portIngressBandwidthcontrol INTEGER } controlPort OBJECT-TYPE SYNTAX INTEGER (1..26) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the index of port." ::= { bandwidthcontrolEntry 1 } portEgressBandwidthcontrol OBJECT-TYPE SYNTAX INTEGER (0..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "Egress Speed Value of port, bandwidth control ." ::= { bandwidthcontrolEntry 2 } portIngressBandwidthcontrol OBJECT-TYPE SYNTAX INTEGER (0..1024000) MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress Speed Value of port, bandwidth control ." ::= { bandwidthcontrolEntry 3 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchHigigStatistics - Higig Statistics Info -- ------------------------------------------------------------------------------ higigStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HigigStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Higig Statistics Info." ::= { gbnDeviceSwitchHigigStatistics 1 } higigStatisticsEntry OBJECT-TYPE SYNTAX HigigStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for Higig Statistics information." INDEX { unit , higig } ::= { higigStatisticsTable 1 } HigigStatisticsEntry ::= SEQUENCE { unit INTEGER, higig INTEGER, snEtherStatsPkts64Octets Counter64, snEtherStatsPkts65to127Octets Counter64, snEtherStatsPkts128to255Octets Counter64, snEtherStatsPkts256to511Octets Counter64, snEtherStatsPkts512to1023Octets Counter64, snEtherStatsPkts1024to1518Octets Counter64, sndot1dTpPortInFrames Counter64, snifInOctets Counter64, snifInDiscards Counter64, snifInUcastPkts Counter64, snifInMulticastPkts Counter64, snifInBroadcastPkts Counter64, snifInErrors Counter64, snDot3StatsFCSErrors Counter64, snDot3StatsSymbolErrors Counter64, snDot3StatsCarrierSenseErrors Counter64, snEtherStatsUndersizePkts Counter64, snEtherStatsOversizePkts Counter64, snEtherStatsFragments Counter64, snEtherStatsJabbers Counter64, sndot1dTpPortOutFrames Counter64, snifOutOctets Counter64, snifOutDiscards Counter64, snifOutUcastPkts Counter64, snifOutMulticastPkts Counter64, snifOutBroadcastPkts Counter64, snifOutErrors Counter64, snDot3StatsDeferredTransmissions Counter64, snEtherStatsCollisions Counter64, snDot3StatsLateCollisions Counter64 } unit OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "unit number." ::= { higigStatisticsEntry 1 } higig OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "higig number." ::= { higigStatisticsEntry 2 } snEtherStatsPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 3 } snEtherStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 4 } snEtherStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 5 } snEtherStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 6 } snEtherStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 7 } snEtherStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { higigStatisticsEntry 8 } sndot1dTpPortInFrames OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { higigStatisticsEntry 9 } snifInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 10 } snifInDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 11 } snifInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 12 } snifInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 13 } snifInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 14 } snifInErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 15 } snDot3StatsFCSErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" ::= { higigStatisticsEntry 16 } snDot3StatsSymbolErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than slotTime, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' or 'carrier extend error' on the GMII. For an interface operating in full-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' on the GMII. The count represented by an instance of this object is incremented at most once per carrier event, even if multiple symbol errors occur during the carrier event. This count does not increment if a collision is present. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 30.3.2.1.5, aSymbolErrorDuringCarrier." ::= { higigStatisticsEntry 17 } snDot3StatsCarrierSenseErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." REFERENCE "IEEE 802.3 Layer Management" ::= { higigStatisticsEntry 18 } snEtherStatsUndersizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { higigStatisticsEntry 19 } snEtherStatsOversizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { higigStatisticsEntry 20 } snEtherStatsFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits." ::= { higigStatisticsEntry 21 } snEtherStatsJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms." ::= { higigStatisticsEntry 22 } sndot1dTpPortOutFrames OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { higigStatisticsEntry 23 } snifOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 24 } snifOutDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 25 } snifOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 26 } snifOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 27 } snifOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 28 } snifOutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { higigStatisticsEntry 29 } snDot3StatsDeferredTransmissions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions." REFERENCE "IEEE 802.3 Layer Management" ::= { higigStatisticsEntry 30 } snEtherStatsCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected." ::= { higigStatisticsEntry 31 } snDot3StatsLateCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." REFERENCE "IEEE 802.3 Layer Management" ::= { higigStatisticsEntry 32 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchChannelStats - Channel group Sttatistics Info -- ------------------------------------------------------------------------------ channelStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ChannelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Channel group Statistics Info(32)." ::= { gbnDeviceSwitchChannelStats 1 } -- The channelStatsEntry channelStatsEntry OBJECT-TYPE SYNTAX ChannelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for Channel Statistics information(32)." INDEX { channelGroupIndex } ::= { channelStatsTable 1 } ChannelStatsEntry ::= SEQUENCE { channelGroupIndex INTEGER, channelInOctetRate Counter32, channelInFrameRate Counter32, channelOutOctetRate Counter32, channelOutFrameRate Counter32, channelPkts64Octets Counter32, channelPkts65to127Octets Counter32, channelPkts128to255Octets Counter32, channelPkts256to511Octets Counter32, channelPkts512to1023Octets Counter32, channelPkts1024to1518Octets Counter32, channelInFrames Counter32, channelInOctets Counter32, channelInDiscards Counter32, channelInUcastPkts Counter32, channelInMulticastPkts Counter32, channelInBroadcastPkts Counter32, channelInErrors Counter32, channelFCSErrors Counter32, channelSymbolErrors Counter32, channelCarrierSenseErrors Counter32, channelUndersizePkts Counter32, channelOversizePkts Counter32, channelFragments Counter32, channelJabbers Counter32, channelOutFrames Counter32, channelOutOctets Counter32, channelOutDiscards Counter32, channelOutUcastPkts Counter32, channelOutMulticastPkts Counter32, channelOutBroadcastPkts Counter32, channelOutErrors Counter32, channelDeferredTransmissions Counter32, channelCollisions Counter32, channelLateCollisions Counter32 } channelGroupIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The configed channel-group index list." --已配置的汇聚组索引列表 ::= { channelStatsEntry 1 } channelInOctetRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress octet rate of this channel-group." --该汇聚组接收报文字节的速率 ::= { channelStatsEntry 2 } channelInFrameRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress packet rate of this channel-group." --该汇聚组接收报文的速率 ::= { channelStatsEntry 3 } channelOutOctetRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The egress octet rate of this channel-group." --该汇聚组发送报文字节的速率 ::= { channelStatsEntry 4 } channelOutFrameRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The egress packet rate of this channel-group." --该汇聚组发送报文的速率 ::= { channelStatsEntry 5 } channelPkts64Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets) in this channel-group." ::= { channelStatsEntry 6 } channelPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets) in this channel-group." ::= { channelStatsEntry 7 } channelPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). in this channel-group." ::= { channelStatsEntry 8 } channelPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets) in this channel-group." ::= { channelStatsEntry 9 } channelPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets) in this channel-group." ::= { channelStatsEntry 10 } channelPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets) in this channel-group." ::= { channelStatsEntry 11 } channelInFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been received by this channel-group from its segment. Note that a frame received on the interface corresponding to this channel-group is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { channelStatsEntry 12 } channelInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the channel-group, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 13 } channelInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 14 } channelInUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 15 } channelInMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 16 } channelInBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 17 } channelInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 18 } channelFCSErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" ::= { channelStatsEntry 19 } channelSymbolErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than slotTime, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' or 'carrier extend error' on the GMII. For an interface operating in full-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' on the GMII. The count represented by an instance of this object is incremented at most once per carrier event, even if multiple symbol errors occur during the carrier event. This count does not increment if a collision is present. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 30.3.2.1.5, aSymbolErrorDuringCarrier." ::= { channelStatsEntry 20 } channelCarrierSenseErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." REFERENCE "IEEE 802.3 Layer Management" ::= { channelStatsEntry 21 } channelUndersizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { channelStatsEntry 22 } channelOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { channelStatsEntry 23 } channelFragments OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits." ::= { channelStatsEntry 24 } channelJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms." ::= { channelStatsEntry 25 } channelOutFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been transmitted by this channel-group to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { channelStatsEntry 26 } channelOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the channel-group, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 27 } channelOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 28 } channelOutUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 29 } channelOutMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 30 } channelOutBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 31 } channelOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsEntry 32 } channelDeferredTransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions." REFERENCE "IEEE 802.3 Layer Management" ::= { channelStatsEntry 33 } channelCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected." ::= { channelStatsEntry 34 } channelLateCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." REFERENCE "IEEE 802.3 Layer Management" ::= { channelStatsEntry 35 } -- The channelStatsXEntry channelStatsXTable OBJECT-TYPE SYNTAX SEQUENCE OF ChannelStatsXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Channel group Statistics Info(64)." ::= { gbnDeviceSwitchChannelStats 2 } channelStatsXEntry OBJECT-TYPE SYNTAX ChannelStatsXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for Channel Statistics information(64)." AUGMENTS { channelStatsEntry } ::= { channelStatsXTable 1 } ChannelStatsXEntry ::= SEQUENCE { channelHCInFrames Counter64, channelHCInOctets Counter64, channelHCInUcastPkts Counter64, channelHCInMulticastPkts Counter64, channelHCInBroadcastPkts Counter64, channelHCInDiscards Counter64, channelHCOutFrames Counter64, channelHCOutOctets Counter64, channelHCOutUcastPkts Counter64, channelHCOutMulticastPkts Counter64, channelHCOutBroadcastPkts Counter64 } channelHCInFrames OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been received by this channel-group from its segment. Note that a frame received on the interface corresponding to this channel-group is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. This object is a 64-bit version of channelInFrames." REFERENCE "ISO/IEC 15802-3 Section 14.6.1.1.3" ::= { channelStatsXEntry 1 } channelHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the channel-group, including framing characters. This object is a 64-bit version of channelInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 2 } channelHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of channelInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 3 } channelHCInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of channelInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 4 } channelHCInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of channelInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 5 } channelHCInDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of valid frames that have been received by this channel-group from its segment which were discarded (i.e., filtered) by the Forwarding Process." REFERENCE "ISO/IEC 15802-3 Section 14.6.1.1.3" ::= { channelStatsXEntry 6 } channelHCOutFrames OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS current DESCRIPTION "The number of frames that have been transmitted by this channel-group to its segment. Note that a frame transmitted on the interface corresponding to this channel-group is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. This object is a 64-bit version of channelOutFrames." REFERENCE "ISO/IEC 15802-3 Section 14.6.1.1.3" ::= { channelStatsXEntry 7 } channelHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the channel-group, including framing characters. This object is a 64-bit version of channelOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 8 } channelHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of channelOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 9 } channelHCOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of channelOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 10 } channelHCOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of channelOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { channelStatsXEntry 11 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchRemoteMirror - Mirror Group -- ------------------------------------------------------------------------------ remoteMirrorVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF RemoteMirrorVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchRmoteMirror 1 } remoteMirrorVlanEntry OBJECT-TYPE SYNTAX RemoteMirrorVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { remoteMirrorVlanIndex } ::= { remoteMirrorVlanTable 1 } RemoteMirrorVlanEntry ::= SEQUENCE { remoteMirrorVlanIndex INTEGER, remoteMirrorVlanEnable TruthValue } remoteMirrorVlanIndex OBJECT-TYPE SYNTAX INTEGER (2..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "the index of remote mirror vlan." ::= { remoteMirrorVlanEntry 1 } remoteMirrorVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "1:enable. 2 disable" ::= { remoteMirrorVlanEntry 2 } remoteMirrorRspanVlanSet OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "set rspan vlan on src-switch, 0:means no rspan vlan;don't set vlan 1 to be rspan vlan" ::= { gbnDeviceSwitchRmoteMirror 2 } remoteMirrorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable remote mirror on src-switch" ::= { gbnDeviceSwitchRmoteMirror 3 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchPortSFPInfo - Port SFP Information -- ------------------------------------------------------------------------------ portSFPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of switch interfaces and associated properties." ::= { gbnDeviceSwitchPortSFPInfo 1 } portSFPInfoEntry OBJECT-TYPE SYNTAX PortSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch interface control and status information." INDEX { portSFPNumber } ::= { portSFPInfoTable 1 } PortSFPInfoEntry ::= SEQUENCE { portSFPNumber INTEGER, transceiverType INTEGER, compliance DisplayString, connectorType INTEGER, waveLength INTEGER, transferDistance INTEGER, digitalDiagnosticMonitor INTEGER, vendorName DisplayString, manuSerialNumber DisplayString, manufacturingDate DisplayString, temperature INTEGER, voltage DisplayString, biasCurrent DisplayString, biasHighThreshold DisplayString, biasLowThreshold DisplayString, rxPower DisplayString, rxPowerHighThreshold DisplayString, rxPowerLowThreshold DisplayString, txPower DisplayString, txPowerHighThreshold DisplayString, txPowerLowThreshold DisplayString } portSFPNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index of port." ::= { portSFPInfoEntry 1 } transceiverType OBJECT-TYPE SYNTAX INTEGER { SFPNotExist(0), GBIC(1), SFF(2), SFP(3), XBI(4), Xenpak(5), XFP(6), XFF(7), XFP-E(8), XPak(9), X2(10), DWDM-SFP(11), QSFP(12), Unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver type" ::= { portSFPInfoEntry 2 } compliance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Compliance type" ::= { portSFPInfoEntry 3 } connectorType OBJECT-TYPE SYNTAX INTEGER { SFPNotExist(0), SC(1), FibreChannelStyle1CopperConnector(2), FibreChannelStyle2CopperConnector(3), BNCTNC(4), FibreChannelCoaxialHeaders(5), FiberJack(6), LC(7), MT-RJ(8), MU(9), SG(10), OpticalPigtail(11), MPOParallelOptic(12), HSSDCII(32), CopperPigtail(33), RJ45(34), Electrical-Mode(35), Unknown(99) } MAX-ACCESS read-only STATUS current DESCRIPTION "Connector type" ::= { portSFPInfoEntry 4 } waveLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Wave length." ::= { portSFPInfoEntry 5 } transferDistance OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transfer distance." ::= { portSFPInfoEntry 6 } digitalDiagnosticMonitor OBJECT-TYPE SYNTAX INTEGER { SFPNotExist(0), NotSupported(1), Supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Digital Diagnostic Monitor." ::= { portSFPInfoEntry 7 } vendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Vendor Name." ::= { portSFPInfoEntry 8 } manuSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacture Serial Number." ::= { portSFPInfoEntry 9 } manufacturingDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacturing Date." ::= { portSFPInfoEntry 10 } temperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of sfp." ::= { portSFPInfoEntry 11 } voltage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of sfp." ::= { portSFPInfoEntry 12 } biasCurrent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "bias Current." ::= { portSFPInfoEntry 13 } biasHighThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "bias Current High Threshold." ::= { portSFPInfoEntry 14 } biasLowThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "bias Current Low Threshold." ::= { portSFPInfoEntry 15 } rxPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RX Power." ::= { portSFPInfoEntry 16 } rxPowerHighThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RX Power High Threshold." ::= { portSFPInfoEntry 17 } rxPowerLowThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RX Power Low Threshold." ::= { portSFPInfoEntry 18 } txPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TX Power." ::= { portSFPInfoEntry 19 } txPowerHighThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TX Power High Threshold." ::= { portSFPInfoEntry 20 } txPowerLowThreshold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TX Power Low Threshold." ::= { portSFPInfoEntry 21 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchPortAvgRate - Port Average Rate Statistics Info -- ------------------------------------------------------------------------------ portRateStatisticsInterval OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "port average rate statistics time interval, unit is minute, default is 5 minutes." ::= { gbnDeviceSwitchPortAvgRate 1 } portAvgRateTable OBJECT-TYPE SYNTAX SEQUENCE OF PortAvgRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of port average rate statistics info(32)." ::= { gbnDeviceSwitchPortAvgRate 2 } portAvgRateEntry OBJECT-TYPE SYNTAX PortAvgRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for port average rate statistics information(32)." INDEX { portIndex } ::= { portAvgRateTable 1 } PortAvgRateEntry ::= SEQUENCE { portIndex INTEGER, portInOctetRate Counter32, portInFrameRate Counter32, portOutOctetRate Counter32, portOutFrameRate Counter32 } portIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The port index list." ::= { portAvgRateEntry 1 } portInOctetRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress octet rate of this port." ::= { portAvgRateEntry 2 } portInFrameRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress packet rate of this port." ::= { portAvgRateEntry 3 } portOutOctetRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The egress octet rate of this port." ::= { portAvgRateEntry 4 } portOutFrameRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The egress packet rate of this port." ::= { portAvgRateEntry 5 } ------------------------------------------------------------------------------ -- -- gbnDeviceSwitchPortbandwidthUtilization - Port Average bandwidth utilization Info -- ------------------------------------------------------------------------------ portBandwidthUtilizationEnable OBJECT-TYPE SYNTAX TruthValue { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port bandwidth switch." ::= { gbnDeviceSwitchPortbandwidthUtilization 1 } portBandwidthUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBandwidthUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of port bandwidth utilization info(32)." ::= { gbnDeviceSwitchPortbandwidthUtilization 2 } portBandwidthUtilizationEntry OBJECT-TYPE SYNTAX PortBandwidthUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for port bandwidth utilization information(32)." INDEX { portBandIndex } ::= { portBandwidthUtilizationTable 2 } PortBandwidthUtilizationEntry ::= SEQUENCE { portBandIndex INTEGER, portInBandwidthUtilization Counter32, portOutBandwidthUtilization Counter32 } portBandIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The port index list." ::= { portBandwidthUtilizationEntry 1 } portInBandwidthUtilization OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ingress bandwidth utilization of this port." ::= { portBandwidthUtilizationEntry 2 } portOutBandwidthUtilization OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The egress bandwidth utilization of this port." ::= { portBandwidthUtilizationEntry 3 } -- -- END of gbnDeviceSwitch-MIB -- END