----------------------------------------------------------------------------- -- File : gbnL2QACL-MIB.mi2 -- Description : ADMIN Enterprise MIB -- Version : 0.01 -- Date : sep 26, 2003 -- -- Copyright (c) 2002-2005 admin Systems, Inc. All Rights Reserved. ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ GBNL2QACL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64,IpAddress FROM SNMPv2-SMI DisplayString, TruthValue,MacAddress,RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnL2 FROM ADMIN-MASTER-MIB PortList FROM Q-BRIDGE-MIB mib-2 FROM RFC1213-MIB VlanId FROM Q-BRIDGE-MIB TOSType FROM OSPF-MIB; gbnL2QACL MODULE-IDENTITY LAST-UPDATED "0309260001Z" -- sep 26,2003 ORGANIZATION "admin Systems, Inc." CONTACT-INFO "admin Systems, Inc. E-mail: support@admin.com.cn" DESCRIPTION "GBN Enterprise MIB definition." REVISION "0309260001Z" -- sep 26,2003 DESCRIPTION "Initial MIB creation." ::= { gbnL2 4 } InetAddressIPv6 ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x" STATUS current DESCRIPTION "Represents an IPv6 network address: Octets Contents Encoding 1-16 IPv6 address network-byte order The corresponding InetAddressType value is ipv6(2). This textual convention SHOULD NOT be used directly in object definitions, as it restricts addresses to a specific format. However, if it is used, it MAY be used either on its own or in conjunction with InetAddressType, as a pair." SYNTAX DisplayString(SIZE (16)) AdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The AdminStatus of an item: 'valid' indicates that it is running,while 'invalid' indicates that it is not." SYNTAX INTEGER { active (1), inactive (2) } Action ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "permit or deny" SYNTAX INTEGER { permit (101), deny (100) } Dscp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "dscp priority" SYNTAX Integer32 (0..63) AclType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "standard、extend、link、user" SYNTAX INTEGER { standard(1), extend (2),link(3), user (4) } PacketFlowType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "broadcast、multicast、unicast" SYNTAX INTEGER { broadcast(1), multicast(2), unicast(3) } ----------------------------------------------------- -- the quene-scheduer QOS ----------------------------------------------------- qosQueueSchedulerGroup OBJECT IDENTIFIER ::= { gbnL2QACL 1 } qosWrrQueue1Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 1th queue(%)." --队列1的权重 ::= { qosQueueSchedulerGroup 1 } qosWrrQueue2Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 2th queue(%)." --队列2的权重 ::= { qosQueueSchedulerGroup 2 } qosWrrQueue3Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 3th queue(%)." --队列3的权重 ::= { qosQueueSchedulerGroup 3 } qosWrrQueue4Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 4th queue(%)." --队列4的权重 ::= { qosQueueSchedulerGroup 4 } qosWrrMaxDelayValue OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS current DESCRIPTION "Max delay time of queue shcedule." --"队列调度时最高优先级的队列最长等待时间 " ::= { qosQueueSchedulerGroup 5 } qosQueueSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority (1), wrr(2), wrrMaxDelay(3) } ACCESS read-write STATUS current DESCRIPTION "Queue schedule mode." --"队列调度模式:绝对优先级、加权轮循调度、最大延时的加权轮循调度 " DEFVAL { strictPriority } ::= { qosQueueSchedulerGroup 6 } qosWrrQueue5Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 5th queue(%)." --队列5的权重 ::= { qosQueueSchedulerGroup 7 } qosWrrQueue6Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 6th queue(%)." --队列6的权重 ::= { qosQueueSchedulerGroup 8 } qosWrrQueue7Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 7th queue(%)." --队列7的权重 ::= { qosQueueSchedulerGroup 9 } qosWrrQueue8Weight OBJECT-TYPE SYNTAX INTEGER (1..97) ACCESS read-write STATUS current DESCRIPTION "Weight of 8th queue(%)." --队列8的权重 ::= { qosQueueSchedulerGroup 10 } -- ACL table Variables -- These parameters apply globally to the swicth's aclNumTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number-based ACL table." --基于数字的访问控制列表，它一共由五种类型：基于数字的标准访问控制列表、 --基于数字的扩展访问列表、基于数字的二层访问控制列表、基于数字的自定义访 --问控制列表和基于数字的接口访问控制列表。其中标准访问控制列表的取值为1-99， --扩展访问控制列表的取值为100-199，二层访问控制列表的取值为200-299，自定义 --访问控制列表的取值为300-399. ::= { gbnL2QACL 2 } aclNumEntry OBJECT-TYPE SYNTAX AclNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of number-based ACL table." --"定义一条基于数字的访问控制列表." INDEX { aclNumNumber } ::= { aclNumTable 1 } AclNumEntry ::= SEQUENCE { aclNumNumber Integer32, aclNumType AclType, aclNumMatchOrder INTEGER, aclNumTotleSubitems Integer32, aclNumRowStatus RowStatus } aclNumNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of number-based ACL." --基于数字的访问控制列表的标号，它的取值范围为1－399. --它的取值可以代表此条访问控制列表是属于何种类型。 ::= { aclNumEntry 1 } aclNumType OBJECT-TYPE SYNTAX AclType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of number-based ACL: standard, extended or link-based." --基于数字的访问控制列表的类型，其中number为1-99为标准ACL， --100-199为扩展ACL，200-299为二层ACL，300-399为用户自定义ACL. ::= { aclNumEntry 2 } aclNumMatchOrder OBJECT-TYPE SYNTAX INTEGER { config (0), auto (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The match order of number-based ACL." --"定义一条访问控制列表的配置顺序，auto 所用的“深度优先“ --原则是指：把指定数据包范围最小的语句排在最前面。这一点可以 --通过比较地址的通配符来实现，通配符越小，则指定的主机的范围 --就越小。比如129.102.1.1 0.0.0.0 指定了一台主机：129.102.1.1 --而129.102.1.1 0.0.255.255 则指定了一个网段： 129.102.1.1 ～ --129.102.255.255，显然前者在访问控制规则中排在前面。具体标准 --为：对于标准访问控制规则的语句，直接比较源地址通配符，通配符 --相同的则按配置顺序；对于基于接口过滤的访问控制规则，配置了'any' --的规则排在后面，其它按配置顺序；对于扩展访问控制规则，首先比 --较源地址通配符，相同的再比较目的地址通配符，仍相同的则比较端 --口号的范围，范围小的排在前面，如果端口号范围也相同则按配置顺序， --默认按照用户的配置顺序即config。" DEFVAL { config } ::= { aclNumEntry 3 } aclNumTotleSubitems OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total subitems of number-based ACL." --"一条访问控制列表可以定义多条子规则，这些子规则按照一定的顺序排列 --成一条访问控制列表，每条ACL最多可以定义128项子规则。" ::= { aclNumEntry 4 } aclNumRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of number-based ACL entry." --"表示当前ACL的状态，添加或删除。" ::= { aclNumEntry 5 } --ACL子项定义，基于数字的标准访问控制列表子项。 aclNumStdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Standard and number-based ACL subitem table." --"定义一条标准访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 3 } aclNumStdSubitemEntry OBJECT-TYPE SYNTAX AclNumStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of standard and number-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNumStdNum, aclNumStdSubNum } ::= { aclNumStdSubitemTable 1 } AclNumStdSubitemEntry ::= SEQUENCE { aclNumStdNum Integer32, aclNumStdSubNum Integer32, aclNumStdSubitemAdminStatus AdminStatus, aclNumStdSubitemAction Action, aclNumStdSubitemSrcAddr IpAddress, aclNumStdSubitemSrcAddrWldmsk IpAddress, aclNumStdFragments TruthValue, aclNumStdTimeRange OCTET STRING, aclNumStdSubitemRowStatus RowStatus, aclNumStdAddressType Integer32, aclNumStdSrcAddrV6 InetAddressIPv6, aclNumStdSrcAddrV6Wldmsk InetAddressIPv6, aclNumStdDefaultRoute TruthValue, aclNumStdL3IntfId Integer32, } aclNumStdNum OBJECT-TYPE SYNTAX Integer32 (1..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of standard and number-based ACL subitem." --"基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. --它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumStdSubitemEntry 1 } aclNumStdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of standard and number-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNumStdSubitemEntry 2 } aclNumStdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of standard and number-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } ::= { aclNumStdSubitemEntry 3 } aclNumStdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of standard and number-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumStdSubitemEntry 4 } aclNumStdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address of standard and number-based ACL subitem." --"标准访问控制列表子项的原地址" ::= { aclNumStdSubitemEntry 5 } aclNumStdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address mask of standard and number-based ACL subitem." --"标准访问控制列表子项的原地址通配符" ::= { aclNumStdSubitemEntry 6 } aclNumStdFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragments of standard and number-based ACL subitem." DEFVAL { false } ::= { aclNumStdSubitemEntry 7 } aclNumStdTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of standard and number-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNumStdSubitemEntry 8 } aclNumStdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of standard and number-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNumStdSubitemEntry 9 } aclNumStdAddressType OBJECT-TYPE SYNTAX Integer32 { ipv4(1), ipv6(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ip-address type of standard and number-based ACL subitem." --"表示当前ACL子项的ip地址的类型。" ::= { aclNumStdSubitemEntry 10 } aclNumStdSrcAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address of standard and number-based ACL subitem." --"表示当前ACL子项的源ipv6地址" ::= { aclNumStdSubitemEntry 11 } aclNumStdSrcAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address mask of standard and number-based ACL subitem." --"表示当前ACL子项的源ipv6地址的通配符" ::= { aclNumStdSubitemEntry 12 } aclNumStdDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The default route of standard and number-based ACL subitem." DEFVAL { false } ::= { aclNumStdSubitemEntry 13 } aclNumStdL3IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The L3 interface type of standard and number-based ACL subitem." ::= { aclNumStdSubitemEntry 14 } --ACL子项定义，基于数字的扩展访问控制列表子项。 aclNumExdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended and number-based ACL subitem table." --"定义一条扩展访问控制列表子项。它是通过对标准访问控制列表的补充。" ::= { gbnL2QACL 4 } aclNumExdSubitemEntry OBJECT-TYPE SYNTAX AclNumExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of extended and number-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNumExdNum, aclNumExdSubNum} ::= { aclNumExdSubitemTable 1 } AclNumExdSubitemEntry ::= SEQUENCE { aclNumExdNum Integer32, aclNumExdSubNum Integer32, aclNumExdSubitemAdminStatus AdminStatus, aclNumExdSubitemAction Action, aclNumExdSubitemProtocal Integer32, aclNumExdSubitemSrcAddr IpAddress, aclNumExdSubitemSrcAddrWldmsk IpAddress, aclNumExdSubitemDstAddr IpAddress, aclNumExdSubitemDstAddrWldmsk IpAddress, aclNumExdSubitemSrcPort Integer32, aclNumExdSubitemSrcPortWldmsk Integer32, aclNumExdSubitemDstPort Integer32, aclNumExdSubitemDstPortWldmsk Integer32, aclNumExdSubitemIcmpType Integer32, aclNumExdSubitemIcmpCode Integer32, aclNumExdSubitemTcpEstablished TruthValue, aclNumExdSubitemPrecedence Integer32, aclNumExdSubitemTos TOSType, aclNumExdSubitemDscp Dscp, aclNumExdSubitemFragments TruthValue, aclNumExdSubitemTimeRange OCTET STRING, aclNumExdSubitemRowStatus RowStatus, aclNumExdAddressType Integer32, aclNumExdSrcAddrV6 InetAddressIPv6, aclNumExdSrcAddrV6Wldmsk InetAddressIPv6, aclNumExdDstAddrV6 InetAddressIPv6, aclNumExdDstAddrV6Wldmsk InetAddressIPv6, aclNumExdSubitemIgmpType Integer32, aclNumExdSubitemDefaultRoute TruthValue, aclNumExdSubitemL3IntfId Integer32 } aclNumExdNum OBJECT-TYPE SYNTAX Integer32 (100..199) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of extended and number-based ACL subitem." --"基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. --它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumExdSubitemEntry 1 } aclNumExdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of extended and number-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNumExdSubitemEntry 2 } aclNumExdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of extended and number-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumExdSubitemEntry 3 } aclNumExdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of extended and number-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumExdSubitemEntry 4 } aclNumExdSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip protocol type of extended and number-based ACL subitem." --"过滤某种协议类型的报文" ::= { aclNumExdSubitemEntry 5 } aclNumExdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address of extended and number-based ACL subitem." --"扩展访问控制列表子项的原地址" ::= { aclNumExdSubitemEntry 6 } aclNumExdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address mask of extended and number-based ACL subitem." --"扩展访问控制列表子项的原地址通配符" ::= { aclNumExdSubitemEntry 7 } aclNumExdSubitemDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ip-address of extended and number-based ACL subitem." --"扩展访问控制列表子项的目的地址" ::= { aclNumExdSubitemEntry 8 } aclNumExdSubitemDstAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ip-address mask of extended and number-based ACL subitem." --"扩展访问控制列表子项的目的地址通配符" ::= { aclNumExdSubitemEntry 9 } aclNumExdSubitemSrcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source TCP/UDP port of extended and number-based ACL subitem." --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNumExdSubitemEntry 10 } aclNumExdSubitemSrcPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source TCP/UDP port mask of extended and number-based ACL subitem." --扩展访问控制列表子项的源端口号通配符 ::= { aclNumExdSubitemEntry 11 } aclNumExdSubitemDstPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination TCP/UDP port of extended and number-based ACL subitem." --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNumExdSubitemEntry 12 } aclNumExdSubitemDstPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination TCP/UDP port mask of extended and number-based ACL subitem." --扩展访问控制列表子项的源端口号通配符 ::= { aclNumExdSubitemEntry 13 } aclNumExdSubitemIcmpType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP type of extended and number-based ACL subitem." --"对ICMP的特定类型的包进行过滤" ::= { aclNumExdSubitemEntry 14 } aclNumExdSubitemIcmpCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP code of extended and number-based ACL subitem." --"对ICMP的特定类型，特定代码的包进行过滤" ::= { aclNumExdSubitemEntry 15 } aclNumExdSubitemTcpEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The established TCP of extended and number-based ACL subitem." --"对TCP第一个建链的包进行过滤" DEFVAL { false } ::= { aclNumExdSubitemEntry 16 } aclNumExdSubitemPrecedence OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip precedence of extended and number-based ACL subitem." --"对特定IP优先级的包进行过滤" ::= { aclNumExdSubitemEntry 17 } aclNumExdSubitemTos OBJECT-TYPE SYNTAX TOSType MAX-ACCESS read-write STATUS current DESCRIPTION "The ip TOS of extended and number-based ACL subitem." --"对数据包中TOS字段等于特定值的包进行过滤" ::= { aclNumExdSubitemEntry 18 } aclNumExdSubitemDscp OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-write STATUS current DESCRIPTION "The ip DSCP of extended and number-based ACL subitem." --"对数据包中DSCP字段等于特定值的包进行过滤" ::= { aclNumExdSubitemEntry 19 } aclNumExdSubitemFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragments of extended and number-based ACL subitem." --"扩展访问控制列表子项的目的地址通配符" DEFVAL { false } -- invalid ::= { aclNumExdSubitemEntry 20 } aclNumExdSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of extended and number-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNumExdSubitemEntry 21 } aclNumExdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of extended and number-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNumExdSubitemEntry 22 } aclNumExdAddressType OBJECT-TYPE SYNTAX Integer32 { ipv4(1), ipv6(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ip-address type of extended and number-based ACL subitem." --"表示当前ACL子项的ip地址的类型。" ::= { aclNumExdSubitemEntry 23 } aclNumExdSrcAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address of extended and number-based ACL subitem." --"表示当前ACL子项的源ipv6地址" ::= { aclNumExdSubitemEntry 24 } aclNumExdSrcAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address mask of extended and number-based ACL subitem." --"表示当前ACL子项的源ipv6地址的通配符" ::= { aclNumExdSubitemEntry 25 } aclNumExdDstAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ipv6-address of extended and number-based ACL subitem." --"表示当前ACL子项的目的ipv6地址" ::= { aclNumExdSubitemEntry 26 } aclNumExdDstAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ipv6-address mask of extended and number-based ACL subitem." --"表示当前ACL子项的目的ipv6地址的通配符" ::= { aclNumExdSubitemEntry 27 } aclNumExdSubitemIgmpType OBJECT-TYPE SYNTAX Integer32 (0..34) MAX-ACCESS read-write STATUS current DESCRIPTION "The IGMP type of extended and number-based ACL subitem." ::= { aclNumExdSubitemEntry 28 } aclNumExdSubitemDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The default route of extended and number-based ACL subitem." --"扩展访问控制列表子项的默认路由" DEFVAL { false } -- invalid ::= { aclNumExdSubitemEntry 29 } aclNumExdSubitemL3IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The L3 interface type of extended and number-based ACL subitem." ::= { aclNumExdSubitemEntry 30 } --ACL子项定义，基于数字的二层访问控制列表子项。 aclNumLnkSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link-based and number-based ACL subitem table." --"定义一条二层访问控制列表子项。" ::= { gbnL2QACL 5 } aclNumLnkSubitemEntry OBJECT-TYPE SYNTAX AclNumLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of link-based and number-based ACL subitem table." --"定义一条二层访问控制列表子项." INDEX { aclNumLnkNum, aclNumLnkSubNum} ::= { aclNumLnkSubitemTable 1 } AclNumLnkSubitemEntry ::= SEQUENCE { aclNumLnkNum Integer32, aclNumLnkSubNum Integer32, aclNumLnkSubitemAdminStatus AdminStatus, aclNumLnkSubitemAction Action, aclNumLnkSubitemProtocal Integer32, aclNumLnkSubitemCos Integer32, aclNumLnkSubitemSrcVlanID VlanId, aclNumLnkSubitemSrcMacAddr MacAddress, aclNumLnkSubitemSrcMacWldmsk MacAddress, aclNumLnkSubitemDstMacAddr MacAddress, aclNumLnkSubitemDstMacWldmsk MacAddress, aclNumLnkSubitemSrcPortNum Integer32, aclNumLnkSubitemDstPortNum Integer32, aclNumLnkSubitemTimeRange OCTET STRING, aclNumLnkSubitemRowStatus RowStatus, aclNumLnkSubitemSrcInnerTag Integer32, aclNumLnkSubitemSrcInnerVlanID VlanId, aclNumLnkSubitemSrcEndVlanID VlanId, } aclNumLnkNum OBJECT-TYPE SYNTAX Integer32 (200..299) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link-based and number-based ACL subitem." --"基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. --它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumLnkSubitemEntry 1 } aclNumLnkSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of link-based and number-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNumLnkSubitemEntry 2 } aclNumLnkSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of link-based and number-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumLnkSubitemEntry 3 } aclNumLnkSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of link-based and number-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumLnkSubitemEntry 4 } aclNumLnkSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ethernet protocal type of link-based and number-based ACL subitem." --"过滤某种协议类型的报文" ::= { aclNumLnkSubitemEntry 5 } aclNumLnkSubitemCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1x COS type of link-based and number-based ACL subitem." --"802.1x优先级" ::= { aclNumLnkSubitemEntry 6 } aclNumLnkSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source vlan of link-based and number-based ACL subitem." --"对VLAN ID为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 7 } aclNumLnkSubitemSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source mac-address of link-based and number-based ACL subitem." --"它于MAC通配符共同作用得到感兴趣的源MAC地址，并对这些 --MAC地址作处理。" ::= { aclNumLnkSubitemEntry 8 } aclNumLnkSubitemSrcMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source mac-address mask of link-based and number-based ACL subitem." --"它于MAC地址共同作用得到感兴趣的源MAC地址，并对这些 --MAC地址作处理。" ::= { aclNumLnkSubitemEntry 9 } aclNumLnkSubitemDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination mac-address of link-based and number-based ACL subitem." --"它于MAC通配符共同作用得到感兴趣的目的MAC地址，并对这些 --MAC地址作处理。" ::= { aclNumLnkSubitemEntry 10 } aclNumLnkSubitemDstMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination mac-address mask of link-based and number-based ACL subitem." --"它于MAC地址共同作用得到感兴趣的目的MAC地址，并对这些 --MAC地址作处理。" ::= { aclNumLnkSubitemEntry 11 } aclNumLnkSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "The source port of link-based and number-based ACL subitem." ::= { aclNumLnkSubitemEntry 12 } aclNumLnkSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port of link-based and number-based ACL subitem." ::= { aclNumLnkSubitemEntry 13 } aclNumLnkSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of link-based and number-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNumLnkSubitemEntry 14 } aclNumLnkSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of link-based and number-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNumLnkSubitemEntry 15 } aclNumLnkSubitemSrcInnerTag OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source inner tag of link-based and number-based ACL subitem." --"对inner tag为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 16 } aclNumLnkSubitemSrcInnerVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source inner vlan of link-based and number-based ACL subitem." --"对inner VLAN ID为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 17 } aclNumLnkSubitemSrcEndVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source end vlan of link-based and number-based ACL subitem." --"对VLAN ID为特定值的数据包进行过滤" ::= { aclNumLnkSubitemEntry 18 } --ACL子项定义，基于数字的自定义访问控制列表子项。 aclNumUserSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNumUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User defined and number-based ACL subitem table." --"定义一条自定义访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 6 } aclNumUserSubitemEntry OBJECT-TYPE SYNTAX AclNumUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of user defined and number-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNumUserNum, aclNumUserSubNum } ::= { aclNumUserSubitemTable 1 } AclNumUserSubitemEntry ::= SEQUENCE { aclNumUserNum Integer32, aclNumUserSubNum Integer32, aclNumUserSubitemAdminStatus AdminStatus, aclNumUserSubitemAction Action, aclNumUserSubitemSrcPortNum Integer32, aclNumUserSubitemDstPortNum Integer32, aclNumUserSubitemRule OCTET STRING, aclNumUserSubitemMask OCTET STRING, aclNumUserTimeRange OCTET STRING, aclNumUserSubitemRowStatus RowStatus } aclNumUserNum OBJECT-TYPE SYNTAX Integer32 (300..399) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user defined and number-based ACL subitem." --"基于数字的访问控制列表的标号，它的取值范围为1－399，1000-1999. --它的取值可以代表此条访问控制列表是属于何种类型。" ::= { aclNumUserSubitemEntry 1 } aclNumUserSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of user defined and number-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNumUserSubitemEntry 2 } aclNumUserSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of user defined and number-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNumUserSubitemEntry 3 } aclNumUserSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of user defined and number-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNumUserSubitemEntry 4 } aclNumUserSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The source port of user defined and number-based ACL subitem." ::= { aclNumUserSubitemEntry 5 } aclNumUserSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port of user defined and number-based ACL subitem." ::= { aclNumUserSubitemEntry 6 } aclNumUserSubitemRule OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "The match rule of user defined and number-based ACL subitem." --"用户自定义访问控制列表子项的匹配字符串" ::= { aclNumUserSubitemEntry 7 } aclNumUserSubitemMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "The match mask of user defined and number-based ACL subitem." --"用户自定义访问控制列表子项的匹配字符串掩码" ::= { aclNumUserSubitemEntry 8 } aclNumUserTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of user defined and number-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNumUserSubitemEntry 9 } aclNumUserSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of user defined and number-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNumUserSubitemEntry 10 } --基于名字的访问控制列表定义 aclNamedTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name-based ACL table." --"基于名字的访问控制列表，它一共由四种类型：基于名字的标准访问控制列表、 --基于数名字的扩展访问列表、基于名字的二层访问控制列表、基于名字的自定义访 --问控制列表." ::= { gbnL2QACL 7 } aclNamedEntry OBJECT-TYPE SYNTAX AclNamedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of name-based ACL table." --"定义一条基于名字的访问控制列表." INDEX { aclNamedName } ::= { aclNamedTable 1 } AclNamedEntry ::= SEQUENCE { aclNamedName OCTET STRING, aclNamedType AclType, aclNamedMatchOrder INTEGER, aclNamedTotleSubitems Integer32, aclNamedRowStatus RowStatus } aclNamedName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of name-based ACL." --"基于名字的访问控制列表的名字，各个访问控制列表（包括不同类 --型的访问控制列表）不能重名。" ::= { aclNamedEntry 1 } aclNamedType OBJECT-TYPE SYNTAX AclType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of name-based ACL: standard, extended or link-based." --"基于名字的访问控制列表的类型，同基于数字的ACL，但它的类型不由名字决定" ::= { aclNamedEntry 2 } aclNamedMatchOrder OBJECT-TYPE SYNTAX INTEGER { config (0), auto (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The match order of name-based ACL." --"定义一条访问控制列表的配置顺序，auto 所用的“深度优先“ --原则是指：把指定数据包范围最小的语句排在最前面。这一点可以 --通过比较地址的通配符来实现，通配符越小，则指定的主机的范围 --就越小。比如129.102.1.1 0.0.0.0 指定了一台主机：129.102.1.1 --而129.102.1.1 0.0.255.255 则指定了一个网段： 129.102.1.1 ～ --129.102.255.255，显然前者在访问控制规则中排在前面。具体标准 --为：对于标准访问控制规则的语句，直接比较源地址通配符，通配符 --相同的则按配置顺序；对于基于接口过滤的访问控制规则，配置了'any' --的规则排在后面，其它按配置顺序；对于扩展访问控制规则，首先比 --较源地址通配符，相同的再比较目的地址通配符，仍相同的则比较端 --口号的范围，范围小的排在前面，如果端口号范围也相同则按配置顺序， --默认按照用户的配置顺序即config。" DEFVAL { config } -- config ::= { aclNamedEntry 3 } aclNamedTotleSubitems OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total subitems of name-based ACL." --"一条访问控制列表可以定义多条子规则，这些子规则按照一定的顺序排列 --成一条访问控制列表，每条ACL最多可以定义128项子规则。" ::= { aclNamedEntry 4 } aclNamedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of name-based ACL." --"表示当前ACL的状态，添加或删除。" ::= { aclNamedEntry 5 } --ACL子项定义，基于名字的标准访问控制列表子项。 aclNamedStdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Standard and name-based ACL subitem table." --"定义一条标准访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 8 } aclNamedStdSubitemEntry OBJECT-TYPE SYNTAX AclNamedStdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of standard and name-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNamedStdName, aclNamedStdSubNum } ::= { aclNamedStdSubitemTable 1 } AclNamedStdSubitemEntry ::= SEQUENCE { aclNamedStdName OCTET STRING, aclNamedStdSubNum Integer32, aclNamedStdSubitemAdminStatus AdminStatus, aclNamedStdSubitemAction Action, aclNamedStdSubitemSrcAddr IpAddress, aclNamedStdSubitemSrcAddrWldmsk IpAddress, aclNamedStdFragments TruthValue, aclNamedStdTimeRange OCTET STRING, aclNamedStdSubitemRowStatus RowStatus, aclNamedStdAddressType Integer32, aclNamedStdSrcAddrV6 InetAddressIPv6, aclNamedStdSrcAddrV6Wldmsk InetAddressIPv6, aclNamedStdDefaultRoute TruthValue, aclNamedStdL3IntfId Integer32 } aclNamedStdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of standard and name-based ACL subitem." --"基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedStdSubitemEntry 1 } aclNamedStdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of standard and name-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNamedStdSubitemEntry 2 } aclNamedStdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of standard and name-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedStdSubitemEntry 3 } aclNamedStdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of standard and name-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedStdSubitemEntry 4 } aclNamedStdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address of standard and name-based ACL subitem." --"标准访问控制列表子项的原地址" ::= { aclNamedStdSubitemEntry 5 } aclNamedStdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address mask of standard and name-based ACL subitem." --"标准访问控制列表子项的原地址通配符" ::= { aclNamedStdSubitemEntry 6 } aclNamedStdFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragments of standard and name-based ACL subitem." --"标准访问控制列表子项的原地址通配符" DEFVAL { false } -- invalid ::= { aclNamedStdSubitemEntry 7 } aclNamedStdTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of standard and name-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNamedStdSubitemEntry 8 } aclNamedStdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of standard and name-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNamedStdSubitemEntry 9 } aclNamedStdAddressType OBJECT-TYPE SYNTAX Integer32 { ipv4(1), ipv6(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ip-address type of standard and name-based ACL subitem." --"表示当前ACL子项的ip地址的类型。" ::= { aclNamedStdSubitemEntry 10 } aclNamedStdSrcAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address of standard and name-based ACL subitem." --"表示当前ACL子项的源ipv6地址" ::= { aclNamedStdSubitemEntry 11 } aclNamedStdSrcAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address mask of standard and name-based ACL subitem." --"表示当前ACL子项的源ipv6地址的通配符" ::= { aclNamedStdSubitemEntry 12 } aclNamedStdDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The default route of standard and name-based ACL subitem." --"标准访问控制列表子项的默认路由" DEFVAL { false } -- invalid ::= { aclNamedStdSubitemEntry 13 } aclNamedStdL3IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The L3 interface type of standard and name-based ACL subitem." ::= { aclNamedStdSubitemEntry 14 } --ACL子项定义，基于名字的扩展访问控制列表子项。 aclNamedExdSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended and name-based ACL subitem table." --"定义一条扩展访问控制列表子项。它是通过对标准访问控制列表的补充。" ::= { gbnL2QACL 9 } aclNamedExdSubitemEntry OBJECT-TYPE SYNTAX AclNamedExdSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of extended and name-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNamedExdName, aclNamedExdSubNum} ::= { aclNamedExdSubitemTable 1 } AclNamedExdSubitemEntry ::= SEQUENCE { aclNamedExdName OCTET STRING, aclNamedExdSubNum Integer32, aclNamedExdSubitemAdminStatus AdminStatus, aclNamedExdSubitemAction Action, aclNamedExdSubitemProtocal Integer32, aclNamedExdSubitemSrcAddr IpAddress, aclNamedExdSubitemSrcAddrWldmsk IpAddress, aclNamedExdSubitemDstAddr IpAddress, aclNamedExdSubitemDstAddrWldmsk IpAddress, aclNamedExdSubitemSrcPort Integer32, aclNamedExdSubitemSrcPortWldmsk Integer32, aclNamedExdSubitemDstPort Integer32, aclNamedExdSubitemDstPortWldmsk Integer32, aclNamedExdSubitemIcmpType Integer32, aclNamedExdSubitemIcmpCode Integer32, aclNamedExdSubitemTcpEstablished TruthValue, aclNamedExdSubitemPrecedence Integer32, aclNamedExdSubitemTos TOSType, aclNamedExdSubitemDscp Dscp, aclNamedExdSubitemFragments TruthValue, aclNamedExdSubitemTimeRange OCTET STRING, aclNamedExdSubitemRowStatus RowStatus, aclNamedExdAddressType Integer32, aclNamedExdSrcAddrV6 InetAddressIPv6, aclNamedExdSrcAddrV6Wldmsk InetAddressIPv6, aclNamedExdDstAddrV6 InetAddressIPv6, aclNamedExdDstAddrV6Wldmsk InetAddressIPv6, aclNamedExdSubitemIgmpType Integer32, aclNamedExdSubitemDefaultRoute TruthValue, aclNamedExdSubitemL3IntfId Integer32 } aclNamedExdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of extended and name-based ACL subitem." --"基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedExdSubitemEntry 1 } aclNamedExdSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of extended and name-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNamedExdSubitemEntry 2 } aclNamedExdSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of extended and name-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedExdSubitemEntry 3 } aclNamedExdSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of extended and name-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedExdSubitemEntry 4 } aclNamedExdSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip protocol type of extended and name-based ACL subitem." --"过滤某种协议类型的报文" ::= { aclNamedExdSubitemEntry 5 } aclNamedExdSubitemSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address of extended and name-based ACL subitem." --"扩展访问控制列表子项的原地址" ::= { aclNamedExdSubitemEntry 6 } aclNamedExdSubitemSrcAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source ip-address mask of extended and name-based ACL subitem." --"扩展访问控制列表子项的原地址通配符" ::= { aclNamedExdSubitemEntry 7 } aclNamedExdSubitemDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ip-address of extended and name-based ACL subitem." --"扩展访问控制列表子项的目的地址" ::= { aclNamedExdSubitemEntry 8 } aclNamedExdSubitemDstAddrWldmsk OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ip-address mask of extended and name-based ACL subitem." --"扩展访问控制列表子项的目的地址通配符" ::= { aclNamedExdSubitemEntry 9 } aclNamedExdSubitemSrcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source TCP/UDP port of extended and name-based ACL subitem." --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNamedExdSubitemEntry 10 } aclNamedExdSubitemSrcPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source TCP/UDP port mask of extended and name-based ACL subitem." --扩展访问控制列表子项的源端口号通配符 ::= { aclNamedExdSubitemEntry 11 } aclNamedExdSubitemDstPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination TCP/UDP port of extended and name-based ACL subitem." --对UDP或TCP报文特定端口号的包进行过滤 ::= { aclNamedExdSubitemEntry 12 } aclNamedExdSubitemDstPortWldmsk OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination TCP/UDP port mask of extended and name-based ACL subitem." --扩展访问控制列表子项的目的端口号通配符 ::= { aclNamedExdSubitemEntry 13 } aclNamedExdSubitemIcmpType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP type of extended and name-based ACL subitem." --"对ICMP的特定类型的包进行过滤" ::= { aclNamedExdSubitemEntry 14 } aclNamedExdSubitemIcmpCode OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The ICMP code of extended and name-based ACL subitem." --"对ICMP的特定类型，特定代码的包进行过滤" ::= { aclNamedExdSubitemEntry 15 } aclNamedExdSubitemTcpEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The established TCP of extended and name-based ACL subitem." --"对TCP第一个建链的包进行过滤" DEFVAL { false } -- invalid ::= { aclNamedExdSubitemEntry 16 } aclNamedExdSubitemPrecedence OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip precedence of extended and name-based ACL subitem." --"对特定IP优先级的包进行过滤" ::= { aclNamedExdSubitemEntry 17 } aclNamedExdSubitemTos OBJECT-TYPE SYNTAX TOSType MAX-ACCESS read-write STATUS current DESCRIPTION "The ip TOS of extended and name-based ACL subitem." --"对数据包中TOS字段等于特定值的包进行过滤" ::= { aclNamedExdSubitemEntry 18 } aclNamedExdSubitemDscp OBJECT-TYPE SYNTAX Dscp MAX-ACCESS read-write STATUS current DESCRIPTION "The ip DSCP of extended and name-based ACL subitem." --"对数据包中DSCP字段等于特定值的包进行过滤" ::= { aclNamedExdSubitemEntry 19 } aclNamedExdSubitemFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ip fragments of extended and name-based ACL subitem." DEFVAL { false } ::= { aclNamedExdSubitemEntry 20 } aclNamedExdSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of extended and name-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNamedExdSubitemEntry 21 } aclNamedExdSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of extended and name-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNamedExdSubitemEntry 22 } aclNamedExdAddressType OBJECT-TYPE SYNTAX Integer32 { ipv4(1), ipv6(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ip-address type of extended and name-based ACL subitem." --"表示当前ACL子项的ip地址的类型。" ::= { aclNamedExdSubitemEntry 23 } aclNamedExdSrcAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address of extended and name-based ACL subitem." --"表示当前ACL子项的源ipv6地址" ::= { aclNamedExdSubitemEntry 24 } aclNamedExdSrcAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The source ipv6-address mask of extended and name-based ACL subitem." --"表示当前ACL子项的源ipv6地址的通配符" ::= { aclNamedExdSubitemEntry 25 } aclNamedExdDstAddrV6 OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ipv6-address of extended and name-based ACL subitem." --"表示当前ACL子项的目的ipv6地址" ::= { aclNamedExdSubitemEntry 26 } aclNamedExdDstAddrV6Wldmsk OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination ipv6-address mask of extended and name-based ACL subitem." --"表示当前ACL子项的目的ipv6地址的通配符" ::= { aclNamedExdSubitemEntry 27 } aclNamedExdSubitemIgmpType OBJECT-TYPE SYNTAX Integer32 (0..34) MAX-ACCESS read-write STATUS current DESCRIPTION "The IGMP type of extended and name-based ACL subitem." ::= { aclNamedExdSubitemEntry 28 } aclNamedExdSubitemDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The default route of extended and name-based ACL subitem." DEFVAL { false } ::= { aclNamedExdSubitemEntry 29 } aclNamedExdSubitemL3IntfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The L3 interface type of extended and name-based ACL subitem." ::= { aclNamedExdSubitemEntry 30 } --ACL子项定义，基于名字的二层访问控制列表子项。 aclNamedLnkSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link-based and name-based ACL subitem table." --"定义一条二层访问控制列表子项。" ::= { gbnL2QACL 10 } aclNamedLnkSubitemEntry OBJECT-TYPE SYNTAX AclNamedLnkSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of link-based and name-based ACL subitem table." --"定义一条二层访问控制列表子项." INDEX { aclNamedLnkName, aclNamedLnkSubNum} ::= { aclNamedLnkSubitemTable 1 } AclNamedLnkSubitemEntry ::= SEQUENCE { aclNamedLnkName OCTET STRING, aclNamedLnkSubNum Integer32, aclNamedLnkSubitemAdminStatus AdminStatus, aclNamedLnkSubitemAction Action, aclNamedLnkSubitemProtocal Integer32, aclNamedLnkSubitemCos Integer32, aclNamedLnkSubitemSrcVlanID VlanId, aclNamedLnkSubitemSrcMacAddr MacAddress, aclNamedLnkSubitemSrcMacWldmsk MacAddress, aclNamedLnkSubitemDstMacAddr MacAddress, aclNamedLnkSubitemDstMacWldmsk MacAddress, aclNamedLnkSubitemSrcPortNum Integer32, aclNamedLnkSubitemDstPortNum Integer32, aclNamedLnkSubitemTimeRange OCTET STRING, aclNamedLnkSubitemRowStatus RowStatus, aclNamedLnkSubitemSrcInnerTag Integer32, aclNamedLnkSubitemSrcInnerVlanID VlanId, aclNamedLnkSubitemSrcEndVlanID VlanId, } aclNamedLnkName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of link-based and name-based ACL subitem." --"基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedLnkSubitemEntry 1 } aclNamedLnkSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of link-based and name-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNamedLnkSubitemEntry 2 } aclNamedLnkSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of link-based and name-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedLnkSubitemEntry 3 } aclNamedLnkSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of link-based and name-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedLnkSubitemEntry 4 } aclNamedLnkSubitemProtocal OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol type of link-based and name-based ACL subitem." --"过滤某种协议类型的报文" ::= { aclNamedLnkSubitemEntry 5 } aclNamedLnkSubitemCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The cos type of link-based and name-based ACL subitem." --"过滤某种协议类型的报文" ::= { aclNamedLnkSubitemEntry 6 } aclNamedLnkSubitemSrcVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source vlan of link-based and name-based ACL subitem." --"对VLAN ID为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 7 } aclNamedLnkSubitemSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source mac-address of link-based and name-based ACL subitem." --"它于MAC通配符共同作用得到感兴趣的源MAC地址，并对这些MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 8 } aclNamedLnkSubitemSrcMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source mac-address mask of link-based and name-based ACL subitem." --"它于MAC地址共同作用得到感兴趣的源MAC地址，并对这些MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 9 } aclNamedLnkSubitemDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination mac-address of link-based and name-based ACL subitem." --"它于MAC通配符共同作用得到感兴趣的目的MAC地址，并对这些MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 10 } aclNamedLnkSubitemDstMacWldmsk OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination mac-address mask of link-based and name-based ACL subitem." --"它于MAC地址共同作用得到感兴趣的目的MAC地址，并对这些MAC地址作处理。" ::= { aclNamedLnkSubitemEntry 11 } aclNamedLnkSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 (1..26) MAX-ACCESS read-write STATUS current DESCRIPTION "The source port of link-based and name-based ACL subitem." ::= { aclNamedLnkSubitemEntry 12 } aclNamedLnkSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port of link-based and name-based ACL subitem." ::= { aclNamedLnkSubitemEntry 13 } aclNamedLnkSubitemTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of link-based and name-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNamedLnkSubitemEntry 14 } aclNamedLnkSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of link-based and name-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNamedLnkSubitemEntry 15 } aclNamedLnkSubitemSrcInnerTag OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The source inner tag of link-based and name-based ACL subitem." --"对inner tag为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 16 } aclNamedLnkSubitemSrcInnerVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source inner vlan of link-based and name-based ACL subitem." --"对inner VLAN ID为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 17 } aclNamedLnkSubitemSrcEndVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The source end vlan of link-based and name-based ACL subitem." --"对VLAN ID为特定值的数据包进行过滤" ::= { aclNamedLnkSubitemEntry 18 } --ACL子项定义，基于名字的自定义访问控制列表子项。 aclNamedUserSubitemTable OBJECT-TYPE SYNTAX SEQUENCE OF AclNamedUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User defined and name-based ACL subitem table." --"定义一条自定义访问控制列表子项。它是通过目的地址进行过滤的。" ::= { gbnL2QACL 11 } aclNamedUserSubitemEntry OBJECT-TYPE SYNTAX AclNamedUserSubitemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of user defined and name-based ACL subitem table." --"定义一条标准访问控制列表子项." INDEX { aclNamedUserName, aclNamedUserSubNum } ::= { aclNamedUserSubitemTable 1 } AclNamedUserSubitemEntry ::= SEQUENCE { aclNamedUserName OCTET STRING, aclNamedUserSubNum Integer32, aclNamedUserSubitemAdminStatus AdminStatus, aclNamedUserSubitemAction Action, aclNamedUserSubitemSrcPortNum Integer32, aclNamedUserSubitemDstPortNum Integer32, aclNamedUserSubitemRule OCTET STRING, aclNamedUserSubitemMask OCTET STRING, aclNamedUserTimeRange OCTET STRING, aclNamedUserSubitemRowStatus RowStatus } aclNamedUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of user defined and name-based ACL subitem." --"基于名字的访问控制列表的名字，它是一个最多32个字符组成的字符串" ::= { aclNamedUserSubitemEntry 1 } aclNamedUserSubNum OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number of user defined and name-based ACL subitem." --"访问控制列表的子项号，0－127。" ::= { aclNamedUserSubitemEntry 2 } aclNamedUserSubitemAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The admin status of user defined and name-based ACL subitem." --"当此项为valid时激活一条访问控制列表，invalid表示只配置了此项 --ACL但并没有下发到硬件开始执行。" DEFVAL { invalid } -- invalid ::= { aclNamedUserSubitemEntry 3 } aclNamedUserSubitemAction OBJECT-TYPE SYNTAX Action MAX-ACCESS read-write STATUS current DESCRIPTION "The action of user defined and name-based ACL subitem." --"定义一条访问列表子项的动作，允许或拒绝。" ::= { aclNamedUserSubitemEntry 4 } aclNamedUserSubitemSrcPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The source port of user defined and name-based ACL subitem." ::= { aclNamedUserSubitemEntry 5 } aclNamedUserSubitemDstPortNum OBJECT-TYPE SYNTAX Integer32 (1..29) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port of user defined and name-based ACL subitem." ::= { aclNamedUserSubitemEntry 6 } aclNamedUserSubitemRule OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "The match rule of user defined and name-based ACL subitem." --"用户自定义访问控制列表子项的匹配字符串" ::= { aclNamedUserSubitemEntry 7 } aclNamedUserSubitemMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..160)) MAX-ACCESS read-write STATUS current DESCRIPTION "The match mask of user defined and name-based ACL subitem." --"用户自定义访问控制列表子项的匹配字符串掩码" ::= { aclNamedUserSubitemEntry 8 } aclNamedUserTimeRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The referred time range of user defined and name-based ACL subitem." --"访问列表子项起作用的时间段" ::= { aclNamedUserSubitemEntry 9 } aclNamedUserSubitemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of user defined and name-based ACL subitem entry." --"表示当前ACL子项的状态，添加或删除。" ::= { aclNamedUserSubitemEntry 10 } --时间段定义 aclTimeRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Time range table." ::= { gbnL2QACL 12 } aclTimeRangeEntry OBJECT-TYPE SYNTAX AclTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of time range table." --"定义一条时间段." INDEX { aclTimeRangeName } ::= { aclTimeRangeTable 1 } AclTimeRangeEntry ::= SEQUENCE { aclTimeRangeName OCTET STRING, aclTimeRangeTotleAbsolutes Integer32, aclTimeRangeTotlePeriods Integer32, aclTimeRangeActive TruthValue, aclTimeRangeRowStatus RowStatus } aclTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of time range." --"时间段的名字" ::= { aclTimeRangeEntry 1 } aclTimeRangeTotleAbsolutes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of absolute time ranges." --"一个时间段最多可以配置12个绝对时间段，这里为已经配置的绝对时间段的数目" DEFVAL { invalid } -- invalid ::= { aclTimeRangeEntry 2 } aclTimeRangeTotlePeriods OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of period time ranges." --"一个时间段最多可以配置32个周期时间段，这里为已经配置的周期时间段的数目" ::= { aclTimeRangeEntry 3 } aclTimeRangeActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The active status of time range." --"时间段的激活状态" ::= { aclTimeRangeEntry 4 } aclTimeRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of time range entry." --"表示当前时间段的状态，添加或删除。" ::= { aclTimeRangeEntry 5 } --绝对时间段定义。 aclTimeRangeAbsoluteTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangeAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Absolute time range table." --"定义一个绝对时间段" ::= { gbnL2QACL 13 } aclTimeRangeAbsoluteEntry OBJECT-TYPE SYNTAX AclTimeRangeAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of absolute time range table." --"定义一条绝对时间段." INDEX { aclTimeRangeAbsoluteName, aclTimeRangeAbsoluteStartTime, aclTimeRangeAbsoluteEndTime } ::= { aclTimeRangeAbsoluteTable 1 } AclTimeRangeAbsoluteEntry ::= SEQUENCE { aclTimeRangeAbsoluteName OCTET STRING, aclTimeRangeAbsoluteStartTime Unsigned32, aclTimeRangeAbsoluteEndTime Unsigned32, aclTimeRangeAbsoluteRowStatus RowStatus } aclTimeRangeAbsoluteName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of absolute time range." --"时间段的名字" ::= { aclTimeRangeAbsoluteEntry 1 } aclTimeRangeAbsoluteStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The start time of absolute time range." --"绝对时间段起始时间(日历时间)" ::= { aclTimeRangeAbsoluteEntry 2 } aclTimeRangeAbsoluteEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The end time of absolute time range." --"绝对时间段终止时间的年份" ::= { aclTimeRangeAbsoluteEntry 3 } aclTimeRangeAbsoluteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of absolute time range entry." --"绝对时间段的当前状态" ::= { aclTimeRangeAbsoluteEntry 4 } --周期时间段定义。 aclTimeRangePeriodTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTimeRangePeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Period time range table." --"定义一个周期时间段" ::= { gbnL2QACL 14 } aclTimeRangePeriodEntry OBJECT-TYPE SYNTAX AclTimeRangePeriodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of period time range table." --"定义一条周期时间段." INDEX { aclTimeRangePeriodName, aclTimeRangePeriodStartWeekDay, aclTimeRangePeriodStartHour, aclTimeRangePeriodStartMin, aclTimeRangePeriodEndWeekDay, aclTimeRangePeriodEndHour, aclTimeRangePeriodEndMin } ::= { aclTimeRangePeriodTable 1 } AclTimeRangePeriodEntry ::= SEQUENCE { aclTimeRangePeriodName OCTET STRING, aclTimeRangePeriodStartWeekDay Unsigned32, aclTimeRangePeriodStartHour Unsigned32, aclTimeRangePeriodStartMin Unsigned32, aclTimeRangePeriodEndWeekDay Unsigned32, aclTimeRangePeriodEndHour Unsigned32, aclTimeRangePeriodEndMin Unsigned32, aclTimeRangePeriodRowStatus RowStatus } aclTimeRangePeriodName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of period time range." --"时间段的名字" ::= { aclTimeRangePeriodEntry 1 } aclTimeRangePeriodStartWeekDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The start week day of period time range." --"周期时间段起始时间的日期（星期几）" ::= { aclTimeRangePeriodEntry 2 } aclTimeRangePeriodStartHour OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The start hour of period time range." --"周期时间段的起始时间（几点）" ::= { aclTimeRangePeriodEntry 3 } aclTimeRangePeriodStartMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The start minute of period time range." --"周期时间段的起始时间（几分）" ::= { aclTimeRangePeriodEntry 4 } aclTimeRangePeriodEndWeekDay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The end week day of period time range." --"周期时间段终止时间的日期（星期几）" ::= { aclTimeRangePeriodEntry 5 } aclTimeRangePeriodEndHour OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The end hour of period time range." --"周期时间段的终止时间（几点）" ::= { aclTimeRangePeriodEntry 6 } aclTimeRangePeriodEndMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The end minute of period time range." --"周期时间段的终止时间（几分）" ::= { aclTimeRangePeriodEntry 7 } aclTimeRangePeriodRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status of period time range entry." --"周期时间段的当前状态" ::= { aclTimeRangePeriodEntry 8 } ----------------------------------------------------- -- the active ACL group ----------------------------------------------------- aclActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF AclActiveEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of active acl entries. " ::= { gbnL2QACL 15 } aclActiveEntry OBJECT-TYPE SYNTAX AclActiveEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of active acl entries. " INDEX { aclActiveIndex } ::= { aclActiveTable 1 } AclActiveEntry ::= SEQUENCE { aclActiveIndex INTEGER, aclActiveUserGroupName OCTET STRING, aclActiveUserGroupSubitem INTEGER, aclActiveIpGroupName OCTET STRING, aclActiveIpGroupSubitem INTEGER, aclActiveLinkGroupName OCTET STRING, aclActiveLinkGroupSubitem INTEGER, aclActiveBlock0Priority INTEGER, aclActiveBlock1Priority INTEGER, aclActiveBlock2Priority INTEGER, aclActiveBlock3Priority INTEGER, aclActiveBlock4Priority INTEGER, aclActiveConfigSequence INTEGER, aclActiveRunning TruthValue, aclActiveRowStatus RowStatus, aclActiveBlock5Priority INTEGER, aclActiveBlock6Priority INTEGER, aclActiveBlock7Priority INTEGER, aclActiveBlock8Priority INTEGER, aclActiveBlock9Priority INTEGER, aclActiveBlock10Priority INTEGER, aclActiveBlock11Priority INTEGER, aclActiveDirection INTEGER, aclActiveInterface INTEGER } aclActiveIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each active acl. " ::= { aclActiveEntry 1 } aclActiveUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active user group acl. " ::= { aclActiveEntry 2 } aclActiveUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active user group acl subitem. " ::= { aclActiveEntry 3 } aclActiveIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active ip group acl. " ::= { aclActiveEntry 4 } aclActiveIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active ip group acl subitem. " ::= { aclActiveEntry 5 } aclActiveLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the active link group acl. " ::= { aclActiveEntry 6 } aclActiveLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the active link group acl subitem. " ::= { aclActiveEntry 7 } aclActiveBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 8 } aclActiveBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 9 } aclActiveBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 10 } aclActiveBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 11 } aclActiveBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the active ACL. 16 means no filter rules in the Hardware." ::= { aclActiveEntry 12 } aclActiveConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the active ACL." ::= { aclActiveEntry 13 } aclActiveRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the active ACL." ::= { aclActiveEntry 14 } aclActiveRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { aclActiveEntry 15 } aclActiveBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 5中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 16 } aclActiveBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 6中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 17 } aclActiveBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 7中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 18 } aclActiveBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 8中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 19 } aclActiveBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 9中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 20 } aclActiveBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 10中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 21 } aclActiveBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the active ACL. 16 means no filter rules in the Hardware." --激活ACL在block 11中的优先级，16表示没有过滤规则在硬件中 ::= { aclActiveEntry 22 } aclActiveDirection OBJECT-TYPE SYNTAX INTEGER { inbound(0), outbound(1) } ACCESS read-write STATUS current DESCRIPTION "ingress/egress of rule.default is inbound" --入口/出口acl，默认为入口。 ::= { aclActiveEntry 23 } aclActiveInterface OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the interface of referenced acl, 0 indicates the global reference." --引用acl的端口，为0表示全局引用。 ::= { aclActiveEntry 24 } ----------------------------------------------------- -- the mirror-to QOS group ----------------------------------------------------- qosMirrorToTable OBJECT-TYPE SYNTAX SEQUENCE OF QosMirrorToEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror-to QOS entries. " ::= { gbnL2QACL 16 } qosMirrorToEntry OBJECT-TYPE SYNTAX QosMirrorToEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror-to QOS entries. " INDEX { qosMirrorToIndex } ::= { qosMirrorToTable 1 } QosMirrorToEntry ::= SEQUENCE { qosMirrorToIndex INTEGER, qosMirrorToUserGroupName OCTET STRING, qosMirrorToUserGroupSubitem INTEGER, qosMirrorToIpGroupName OCTET STRING, qosMirrorToIpGroupSubitem INTEGER, qosMirrorToLinkGroupName OCTET STRING, qosMirrorToLinkGroupSubitem INTEGER, qosMirrorToInterface INTEGER, qosMirrorToBlock0Priority INTEGER, qosMirrorToBlock1Priority INTEGER, qosMirrorToBlock2Priority INTEGER, qosMirrorToBlock3Priority INTEGER, qosMirrorToBlock4Priority INTEGER, qosMirrorToConfigSequence INTEGER, qosMirrorToRunning TruthValue, qosMirrorToRowStatus RowStatus, qosMirrorToBlock5Priority INTEGER, qosMirrorToBlock6Priority INTEGER, qosMirrorToBlock7Priority INTEGER, qosMirrorToBlock8Priority INTEGER, qosMirrorToBlock9Priority INTEGER, qosMirrorToBlock10Priority INTEGER, qosMirrorToBlock11Priority INTEGER } qosMirrorToIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each mirror-to QOS. " ::= { qosMirrorToEntry 1 } qosMirrorToUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS user group acl. " ::= { qosMirrorToEntry 2 } qosMirrorToUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS user group acl subitem. " ::= { qosMirrorToEntry 3 } qosMirrorToIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS ip group acl. " ::= { qosMirrorToEntry 4 } qosMirrorToIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS ip group acl subitem. " ::= { qosMirrorToEntry 5 } qosMirrorToLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the mirror-to QOS link group acl. " ::= { qosMirrorToEntry 6 } qosMirrorToLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the mirror-to QOS link group acl subitem. " ::= { qosMirrorToEntry 7 } qosMirrorToInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-write STATUS current DESCRIPTION "the mirror-to interface of the mirror-to QOS. " ::= { qosMirrorToEntry 8 } qosMirrorToBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 9 } qosMirrorToBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 10 } qosMirrorToBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 11 } qosMirrorToBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 12 } qosMirrorToBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." ::= { qosMirrorToEntry 13 } qosMirrorToConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the mirror-to QOS." ::= { qosMirrorToEntry 14 } qosMirrorToRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the mirror-to QOS. " ::= { qosMirrorToEntry 15 } qosMirrorToRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosMirrorToEntry 16 } qosMirrorToBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 5中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 17 } qosMirrorToBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 18 } qosMirrorToBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 19 } qosMirrorToBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 20 } qosMirrorToBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 21 } qosMirrorToBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 22 } qosMirrorToBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the mirror-to QOS. 16 means no filter rules in the Hardware." --流镜像在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosMirrorToEntry 23 } ----------------------------------------------------- -- the rate-limit QOS ----------------------------------------------------- qosRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF QosRateLimitEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of rate-limit QOS entries. " ::= { gbnL2QACL 17 } qosRateLimitEntry OBJECT-TYPE SYNTAX QosRateLimitEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of rate-limit QOS entries. " INDEX { qosRateLimitIndex } ::= { qosRateLimitTable 1 } QosRateLimitEntry ::= SEQUENCE { qosRateLimitIndex INTEGER, qosRateLimitUserGroupName OCTET STRING, qosRateLimitUserGroupSubitem INTEGER, qosRateLimitIpGroupName OCTET STRING, qosRateLimitIpGroupSubitem INTEGER, qosRateLimitLinkGroupName OCTET STRING, qosRateLimitLinkGroupSubitem INTEGER, qosRateLimitIntf INTEGER, qosRateLimitTargetRate INTEGER, qosRateLimitExceedAction INTEGER, qosRateLimitDscpValue INTEGER, qosRateLimitBlock0Priority INTEGER, qosRateLimitBlock1Priority INTEGER, qosRateLimitBlock2Priority INTEGER, qosRateLimitBlock3Priority INTEGER, qosRateLimitBlock4Priority INTEGER, qosRateLimitConfigSequence INTEGER, qosRateLimitRunning TruthValue, qosRateLimitRowStatus RowStatus, qosRateLimitBlock5Priority INTEGER, qosRateLimitBlock6Priority INTEGER, qosRateLimitBlock7Priority INTEGER, qosRateLimitBlock8Priority INTEGER, qosRateLimitBlock9Priority INTEGER, qosRateLimitBlock10Priority INTEGER, qosRateLimitBlock11Priority INTEGER, qosRateLimitPolicerId INTEGER, qosRateLimitUsePolicer TruthValue, qosRateLimitCIR INTEGER, qosRateLimitCBS INTEGER, qosRateLimitPIR INTEGER, qosRateLimitPBS INTEGER, qosRateLimitRedAction INTEGER, qosRateLimitRedDscp INTEGER, qosRateLimitYellowAction INTEGER, qosRateLimitYellowDscp INTEGER, qosRateLimitGreenAction INTEGER, qosRateLimitGreenDscp INTEGER, qosRateLimitUsetrTCM TruthValue } qosRateLimitIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each rate-limit QOS. " ::= { qosRateLimitEntry 1 } qosRateLimitUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS user group acl. " ::= { qosRateLimitEntry 2 } qosRateLimitUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS user group acl subitem. " ::= { qosRateLimitEntry 3 } qosRateLimitIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS ip group acl. " ::= { qosRateLimitEntry 4 } qosRateLimitIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS ip group acl subitem. " ::= { qosRateLimitEntry 5 } qosRateLimitLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the rate-limit QOS link group acl. " ::= { qosRateLimitEntry 6 } qosRateLimitLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the rate-limit QOS link group acl subitem. " ::= { qosRateLimitEntry 7 } qosRateLimitIntf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the target rate on this interface. " ::= { qosRateLimitEntry 8 } qosRateLimitTargetRate OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "the target rate of the rate-limit QOS. " ::= { qosRateLimitEntry 9 } qosRateLimitExceedAction OBJECT-TYPE SYNTAX INTEGER { drop(1), set-dscp-value(2) } ACCESS read-write STATUS current DESCRIPTION "the exceed action of the rate-limit QOS. " ::= { qosRateLimitEntry 10 } qosRateLimitDscpValue OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS current DESCRIPTION "the dscp value of the rate-limit QOS. " ::= { qosRateLimitEntry 11 } qosRateLimitBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 12 } qosRateLimitBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 13 } qosRateLimitBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 14 } qosRateLimitBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 15 } qosRateLimitBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." ::= { qosRateLimitEntry 16 } qosRateLimitConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the rate-limit QOS." ::= { qosRateLimitEntry 17 } qosRateLimitRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the rate-limit QOS." ::= { qosRateLimitEntry 18 } qosRateLimitRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosRateLimitEntry 19 } qosRateLimitBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 20 } qosRateLimitBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 21 } qosRateLimitBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 22 } qosRateLimitBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 23 } qosRateLimitBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 24 } qosRateLimitBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 25 } qosRateLimitBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the rate-limit QOS. 16 means no filter rules in the Hardware." --流量监管在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosRateLimitEntry 26 } qosRateLimitPolicerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the two rate policer ID of the rate-limit QOS." ::= { qosRateLimitEntry 27 } qosRateLimitUsePolicer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "this value determines whether the rate-limit QOS use a two rate policer." ::= { qosRateLimitEntry 28 } qosRateLimitCIR OBJECT-TYPE SYNTAX INTEGER(64..1048512) ACCESS read-write STATUS current DESCRIPTION "the Committed information rate value ." ::= { qosRateLimitEntry 29 } qosRateLimitCBS OBJECT-TYPE SYNTAX INTEGER(4..16384) ACCESS read-write STATUS current DESCRIPTION "the Committed burst size value ." ::= { qosRateLimitEntry 30 } qosRateLimitPIR OBJECT-TYPE SYNTAX INTEGER(64..1048512) ACCESS read-write STATUS current DESCRIPTION "the peak information rate value ." ::= { qosRateLimitEntry 31 } qosRateLimitPBS OBJECT-TYPE SYNTAX INTEGER(4..16384) ACCESS read-write STATUS current DESCRIPTION "the peak burst size value ." ::= { qosRateLimitEntry 32 } qosRateLimitRedAction OBJECT-TYPE SYNTAX INTEGER{ drop(1), set-dscp-value(2), copy-to-cpu(3), transmit(4) } ACCESS read-write STATUS current DESCRIPTION "the packets marked red action ." ::= { qosRateLimitEntry 33 } qosRateLimitRedDscp OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-write STATUS current DESCRIPTION "the packets marked red set dscp value." ::= { qosRateLimitEntry 34} qosRateLimitYellowAction OBJECT-TYPE SYNTAX INTEGER{ drop(1), set-dscp-value(2), copy-to-cpu(3), transmit(4) } ACCESS read-write STATUS current DESCRIPTION "the packets marked yellow action." ::= { qosRateLimitEntry 35 } qosRateLimitYellowDscp OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-write STATUS current DESCRIPTION "the packets marked yellow set dscp value." ::= { qosRateLimitEntry 36 } qosRateLimitGreenAction OBJECT-TYPE SYNTAX INTEGER{ drop(1), set-dscp-value(2), copy-to-cpu(3), transmit(4) } ACCESS read-write STATUS current DESCRIPTION "the packets marked green action ." ::= { qosRateLimitEntry 37 } qosRateLimitGreenDscp OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-write STATUS current DESCRIPTION "the packets marked green set dscp value." ::= { qosRateLimitEntry 38} qosRateLimitUsetrTCM OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "this value determines whether the rate-limit QOS use a two rate policer." ::= { qosRateLimitEntry 39 } ----------------------------------------------------- -- the traffic-priority QOS ----------------------------------------------------- qosTrafficPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficPriorityEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-priority QOS entries. " ::= { gbnL2QACL 18 } qosTrafficPriorityEntry OBJECT-TYPE SYNTAX QosTrafficPriorityEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-priority QOS entries. " INDEX { qosTrafficPriorityIndex } ::= { qosTrafficPriorityTable 1 } QosTrafficPriorityEntry ::= SEQUENCE { qosTrafficPriorityIndex INTEGER, qosTrafficPriorityUserGroupName OCTET STRING, qosTrafficPriorityUserGroupSubitem INTEGER, qosTrafficPriorityIpGroupName OCTET STRING, qosTrafficPriorityIpGroupSubitem INTEGER, qosTrafficPriorityLinkGroupName OCTET STRING, qosTrafficPriorityLinkGroupSubitem INTEGER, qosTrafficPriorityDscp INTEGER, qosTrafficPriorityIpPrecedence INTEGER, qosTrafficPriorityCos INTEGER, qosTrafficPriorityLocalPrecedence INTEGER, qosTrafficPriorityBlock0Priority INTEGER, qosTrafficPriorityBlock1Priority INTEGER, qosTrafficPriorityBlock2Priority INTEGER, qosTrafficPriorityBlock3Priority INTEGER, qosTrafficPriorityBlock4Priority INTEGER, qosTrafficPriorityConfigSequence INTEGER, qosTrafficPriorityRunning TruthValue, qosTrafficPriorityRowStatus RowStatus, qosTrafficPriorityBlock5Priority INTEGER, qosTrafficPriorityBlock6Priority INTEGER, qosTrafficPriorityBlock7Priority INTEGER, qosTrafficPriorityBlock8Priority INTEGER, qosTrafficPriorityBlock9Priority INTEGER, qosTrafficPriorityBlock10Priority INTEGER, qosTrafficPriorityBlock11Priority INTEGER } qosTrafficPriorityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-priority QOS. " ::= { qosTrafficPriorityEntry 1 } qosTrafficPriorityUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS user group acl. " ::= { qosTrafficPriorityEntry 2 } qosTrafficPriorityUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS user group acl subitem. " ::= { qosTrafficPriorityEntry 3 } qosTrafficPriorityIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS ip group acl. " ::= { qosTrafficPriorityEntry 4 } qosTrafficPriorityIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS ip group acl subitem. " ::= { qosTrafficPriorityEntry 5 } qosTrafficPriorityLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-priority QOS link group acl. " ::= { qosTrafficPriorityEntry 6 } qosTrafficPriorityLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-priority QOS link group acl subitem. " ::= { qosTrafficPriorityEntry 7 } qosTrafficPriorityDscp OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS current DESCRIPTION "the DSCP of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 8 } qosTrafficPriorityIpPrecedence OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the IP precedence of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 9 } qosTrafficPriorityCos OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the COS of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 10 } qosTrafficPriorityLocalPrecedence OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS current DESCRIPTION "the local precedence of the traffic-priority QOS. " ::= { qosTrafficPriorityEntry 11 } qosTrafficPriorityBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 12 } qosTrafficPriorityBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 13 } qosTrafficPriorityBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 14 } qosTrafficPriorityBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 15 } qosTrafficPriorityBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficPriorityEntry 16 } qosTrafficPriorityConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-priority QOS." ::= { qosTrafficPriorityEntry 17 } qosTrafficPriorityRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-priority QOS." ::= { qosTrafficPriorityEntry 18 } qosTrafficPriorityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficPriorityEntry 19 } qosTrafficPriorityBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 20 } qosTrafficPriorityBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 21 } qosTrafficPriorityBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 22 } qosTrafficPriorityBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 23 } qosTrafficPriorityBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 24 } qosTrafficPriorityBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 25 } qosTrafficPriorityBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-priority QOS. 16 means no filter rules in the Hardware." --报文优先级在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficPriorityEntry 26 } ----------------------------------------------------- -- the traffic-policy based route ----------------------------------------------------- qosTrafficPbrTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficPbrEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-policy-based-route QOS entries. " ::= { gbnL2QACL 19 } qosTrafficPbrEntry OBJECT-TYPE SYNTAX QosTrafficPbrEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-policy-based-route QOS entries. " INDEX { qosTrafficPbrIndex } ::= { qosTrafficPbrTable 1 } QosTrafficPbrEntry ::= SEQUENCE { qosTrafficPbrIndex INTEGER, qosTrafficPbrUserGroupName OCTET STRING, qosTrafficPbrUserGroupSubitem INTEGER, qosTrafficPbrIpGroupName OCTET STRING, qosTrafficPbrIpGroupSubitem INTEGER, qosTrafficPbrLinkGroupName OCTET STRING, qosTrafficPbrLinkGroupSubitem INTEGER, qosTrafficPbrNextHopIp IpAddress, qosTrafficPbrConfigSequence INTEGER, qosTrafficPbrRunning TruthValue, qosTrafficPbrRowStatus RowStatus, } qosTrafficPbrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-PBR QOS. " ::= { qosTrafficPbrEntry 1 } qosTrafficPbrUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-PBR QOS user group acl. " ::= { qosTrafficPbrEntry 2 } qosTrafficPbrUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-PBR QOS user group acl subitem. " ::= { qosTrafficPbrEntry 3 } qosTrafficPbrIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-PBR QOS ip group acl. " ::= { qosTrafficPbrEntry 4 } qosTrafficPbrIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-PBR QOS ip group acl subitem. " ::= { qosTrafficPbrEntry 5 } qosTrafficPbrLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-PBR QOS link group acl. " ::= { qosTrafficPbrEntry 6 } qosTrafficPbrLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-PBR QOS link group acl subitem. " ::= { qosTrafficPbrEntry 7 } qosTrafficPbrNextHopIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS current DESCRIPTION "the IP precedence of the traffic-PBR QOS. " ::= { qosTrafficPbrEntry 8 } qosTrafficPbrConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-PBR QOS." ::= { qosTrafficPbrEntry 9 } qosTrafficPbrRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-PBR QOS." ::= { qosTrafficPbrEntry 10 } qosTrafficPbrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficPbrEntry 11 } ----------------------------------------------------- -- the traffic redirect QOS ----------------------------------------------------- qosTrafficRedirectTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficRedirectEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-redirect QOS entries. " ::= { gbnL2QACL 20 } qosTrafficRedirectEntry OBJECT-TYPE SYNTAX QosTrafficRedirectEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-redirect QOS entries. " INDEX { qosTrafficRedirectIndex } ::= { qosTrafficRedirectTable 1 } QosTrafficRedirectEntry ::= SEQUENCE { qosTrafficRedirectIndex INTEGER, qosTrafficRedirectUserGroupName OCTET STRING, qosTrafficRedirectUserGroupSubitem INTEGER, qosTrafficRedirectIpGroupName OCTET STRING, qosTrafficRedirectIpGroupSubitem INTEGER, qosTrafficRedirectLinkGroupName OCTET STRING, qosTrafficRedirectLinkGroupSubitem INTEGER, qosTrafficRedirectInterface INTEGER, qosTrafficRedirectBlock0Priority INTEGER, qosTrafficRedirectBlock1Priority INTEGER, qosTrafficRedirectBlock2Priority INTEGER, qosTrafficRedirectBlock3Priority INTEGER, qosTrafficRedirectBlock4Priority INTEGER, qosTrafficRedirectConfigSequence INTEGER, qosTrafficRedirectRunning TruthValue, qosTrafficRedirectRowStatus RowStatus, qosTrafficRedirectBlock5Priority INTEGER, qosTrafficRedirectBlock6Priority INTEGER, qosTrafficRedirectBlock7Priority INTEGER, qosTrafficRedirectBlock8Priority INTEGER, qosTrafficRedirectBlock9Priority INTEGER, qosTrafficRedirectBlock10Priority INTEGER, qosTrafficRedirectBlock11Priority INTEGER } qosTrafficRedirectIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-redirect QOS. " ::= { qosTrafficRedirectEntry 1 } qosTrafficRedirectUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS user group acl. " ::= { qosTrafficRedirectEntry 2 } qosTrafficRedirectUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS user group acl subitem. " ::= { qosTrafficRedirectEntry 3 } qosTrafficRedirectIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS ip group acl. " ::= { qosTrafficRedirectEntry 4 } qosTrafficRedirectIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS ip group acl subitem. " ::= { qosTrafficRedirectEntry 5 } qosTrafficRedirectLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-redirect QOS link group acl. " ::= { qosTrafficRedirectEntry 6 } qosTrafficRedirectLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-redirect QOS link group acl subitem. " ::= { qosTrafficRedirectEntry 7 } qosTrafficRedirectInterface OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the redirect interface of the traffic-redirect QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficRedirectEntry 8 } qosTrafficRedirectBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 9 } qosTrafficRedirectBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 10 } qosTrafficRedirectBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 11 } qosTrafficRedirectBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 12 } qosTrafficRedirectBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRedirectEntry 13 } qosTrafficRedirectConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-redirect QOS." ::= { qosTrafficRedirectEntry 14 } qosTrafficRedirectRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-redirect QOS." ::= { qosTrafficRedirectEntry 15 } qosTrafficRedirectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficRedirectEntry 16 } qosTrafficRedirectBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 17 } qosTrafficRedirectBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 18 } qosTrafficRedirectBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 19 } qosTrafficRedirectBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 20 } qosTrafficRedirectBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 21 } qosTrafficRedirectBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 22 } qosTrafficRedirectBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-redirect QOS. 16 means no filter rules in the Hardware." --报文重定向在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficRedirectEntry 23 } ----------------------------------------------------- -- the traffic statistics QOS ----------------------------------------------------- qosTrafficStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficStatisticsEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-statistics QOS entries. " ::= { gbnL2QACL 21} qosTrafficStatisticsEntry OBJECT-TYPE SYNTAX QosTrafficStatisticsEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-statistics QOS entries. " INDEX { qosTrafficStatisticsIndex } ::= { qosTrafficStatisticsTable 1 } QosTrafficStatisticsEntry ::= SEQUENCE { qosTrafficStatisticsIndex INTEGER, qosTrafficStatisticsUserGroupName OCTET STRING, qosTrafficStatisticsUserGroupSubitem INTEGER, qosTrafficStatisticsIpGroupName OCTET STRING, qosTrafficStatisticsIpGroupSubitem INTEGER, qosTrafficStatisticsLinkGroupName OCTET STRING, qosTrafficStatisticsLinkGroupSubitem INTEGER, qosTrafficStatisticsBlock0Priority INTEGER, qosTrafficStatisticsBlock1Priority INTEGER, qosTrafficStatisticsBlock2Priority INTEGER, qosTrafficStatisticsBlock3Priority INTEGER, qosTrafficStatisticsBlock4Priority INTEGER, qosTrafficStatisticsConfigSequence INTEGER, qosTrafficStatisticsRunning TruthValue, qosTrafficStatisticsRowStatus RowStatus, qosTrafficStatisticsCounter Integer32, qosTrafficStatisticsBlock5Priority INTEGER, qosTrafficStatisticsBlock6Priority INTEGER, qosTrafficStatisticsBlock7Priority INTEGER, qosTrafficStatisticsBlock8Priority INTEGER, qosTrafficStatisticsBlock9Priority INTEGER, qosTrafficStatisticsBlock10Priority INTEGER, qosTrafficStatisticsBlock11Priority INTEGER, qosTrafficStatisticsDirection INTEGER } qosTrafficStatisticsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-statistics QOS. " ::= { qosTrafficStatisticsEntry 1 } qosTrafficStatisticsUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS user group acl. " ::= { qosTrafficStatisticsEntry 2 } qosTrafficStatisticsUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS user group acl subitem. " ::= { qosTrafficStatisticsEntry 3 } qosTrafficStatisticsIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS ip group acl. " ::= { qosTrafficStatisticsEntry 4 } qosTrafficStatisticsIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS ip group acl subitem. " ::= { qosTrafficStatisticsEntry 5 } qosTrafficStatisticsLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-statistics QOS link group acl. " ::= { qosTrafficStatisticsEntry 6 } qosTrafficStatisticsLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-statistics QOS link group acl subitem. " ::= { qosTrafficStatisticsEntry 7 } qosTrafficStatisticsBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 8 } qosTrafficStatisticsBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 9 } qosTrafficStatisticsBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 10 } qosTrafficStatisticsBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 11 } qosTrafficStatisticsBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficStatisticsEntry 12 } qosTrafficStatisticsConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-statistics QOS." ::= { qosTrafficStatisticsEntry 13 } qosTrafficStatisticsRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-statistics QOS." ::= { qosTrafficStatisticsEntry 14 } qosTrafficStatisticsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficStatisticsEntry 15 } qosTrafficStatisticsCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of the counter." ::= { qosTrafficStatisticsEntry 16 } qosTrafficStatisticsBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 17 } qosTrafficStatisticsBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 18 } qosTrafficStatisticsBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 19 } qosTrafficStatisticsBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 20 } qosTrafficStatisticsBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 21 } qosTrafficStatisticsBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 22 } qosTrafficStatisticsBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-statistics QOS. 16 means no filter rules in the Hardware." --流量统计在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficStatisticsEntry 23 } qosTrafficStatisticsDirection OBJECT-TYPE SYNTAX INTEGER { inbound(0), outbound(1) } ACCESS read-write STATUS current DESCRIPTION "ingress/egress of rule.default is inbound" --入口/出口acl，默认为入口。 ::= { qosTrafficStatisticsEntry 24 } ----------------------------------------------------- -- the line-rate QOS ----------------------------------------------------- qosLineRateTable OBJECT-TYPE SYNTAX SEQUENCE OF QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " ::= { gbnL2QACL 22 } qosLineRateEntry OBJECT-TYPE SYNTAX QosLineRateEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of line-rate QOS entries. " INDEX { qosLineRateInterface } ::= { qosLineRateTable 1 } QosLineRateEntry ::= SEQUENCE { qosLineRateInterface INTEGER, qosLineRateTargetRate INTEGER } qosLineRateInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the line rate interface. " ::= { qosLineRateEntry 1 } qosLineRateTargetRate OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS current DESCRIPTION "the target rate of the line-rate QOS. " ::= { qosLineRateEntry 2 } ----------------------------------------------------- -- the traffic copy to cpu QOS ----------------------------------------------------- qosTrafficCopyToCpuTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficCopyToCpuEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-copy-to-cpu QOS entries. " ::= { gbnL2QACL 23 } qosTrafficCopyToCpuEntry OBJECT-TYPE SYNTAX QosTrafficCopyToCpuEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-copy-to-cpu QOS entries. " INDEX { qosTrafficCopyToCpuIndex } ::= { qosTrafficCopyToCpuTable 1 } QosTrafficCopyToCpuEntry ::= SEQUENCE { qosTrafficCopyToCpuIndex INTEGER, qosTrafficCopyToCpuUserGroupName OCTET STRING, qosTrafficCopyToCpuUserGroupSubitem INTEGER, qosTrafficCopyToCpuIpGroupName OCTET STRING, qosTrafficCopyToCpuIpGroupSubitem INTEGER, qosTrafficCopyToCpuLinkGroupName OCTET STRING, qosTrafficCopyToCpuLinkGroupSubitem INTEGER, qosTrafficCopyToCpuBlock0Priority INTEGER, qosTrafficCopyToCpuBlock1Priority INTEGER, qosTrafficCopyToCpuBlock2Priority INTEGER, qosTrafficCopyToCpuBlock3Priority INTEGER, qosTrafficCopyToCpuBlock4Priority INTEGER, qosTrafficCopyToCpuConfigSequence INTEGER, qosTrafficCopyToCpuRunning TruthValue, qosTrafficCopyToCpuRowStatus RowStatus, qosTrafficCopyToCpuBlock5Priority INTEGER, qosTrafficCopyToCpuBlock6Priority INTEGER, qosTrafficCopyToCpuBlock7Priority INTEGER, qosTrafficCopyToCpuBlock8Priority INTEGER, qosTrafficCopyToCpuBlock9Priority INTEGER, qosTrafficCopyToCpuBlock10Priority INTEGER, qosTrafficCopyToCpuBlock11Priority INTEGER } qosTrafficCopyToCpuIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-copy-to-cpu QOS. " ::= { qosTrafficCopyToCpuEntry 1 } qosTrafficCopyToCpuUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS user group acl. " ::= { qosTrafficCopyToCpuEntry 2 } qosTrafficCopyToCpuUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS user group acl subitem. " ::= { qosTrafficCopyToCpuEntry 3 } qosTrafficCopyToCpuIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS ip group acl. " ::= { qosTrafficCopyToCpuEntry 4 } qosTrafficCopyToCpuIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS ip group acl subitem. " ::= { qosTrafficCopyToCpuEntry 5 } qosTrafficCopyToCpuLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-copy-to-cpu QOS link group acl. " ::= { qosTrafficCopyToCpuEntry 6 } qosTrafficCopyToCpuLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-copy-to-cpu QOS link group acl subitem. " ::= { qosTrafficCopyToCpuEntry 7 } qosTrafficCopyToCpuBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 8 } qosTrafficCopyToCpuBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 9 } qosTrafficCopyToCpuBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 10 } qosTrafficCopyToCpuBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 11 } qosTrafficCopyToCpuBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficCopyToCpuEntry 12 } qosTrafficCopyToCpuConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-copy-to-cpu QOS." ::= { qosTrafficCopyToCpuEntry 13 } qosTrafficCopyToCpuRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-copy-to-cpu QOS." ::= { qosTrafficCopyToCpuEntry 14 } qosTrafficCopyToCpuRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficCopyToCpuEntry 15 } qosTrafficCopyToCpuBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 5 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 16 } qosTrafficCopyToCpuBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 6 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 17 } qosTrafficCopyToCpuBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 7 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 18 } qosTrafficCopyToCpuBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 8 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 19 } qosTrafficCopyToCpuBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 9 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 20 } qosTrafficCopyToCpuBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 10 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 21 } qosTrafficCopyToCpuBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-copy-to-cpu QOS. 16 means no filter rules in the Hardware." --报文拷贝到CPU在block 11 中的优先级，16表示没有过滤规则在硬件中 ::= { qosTrafficCopyToCpuEntry 22 } ----------------------------------------------------- -- the port-isolation configuration ----------------------------------------------------- qaclAppPortIsolationGroup OBJECT IDENTIFIER ::= { gbnL2QACL 24 } qaclAppPortIsolationDownLinkPorts OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS current DESCRIPTION "qacl application port isolation down link portlist" -- QACL应用端口隔离的下行端口列表 -- ::= { qaclAppPortIsolationGroup 1 } ----------------------------------------------------- -- the storm control ----------------------------------------------------- stormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " ::= { gbnL2QACL 25 } stormControlEntry OBJECT-TYPE SYNTAX StormControlEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of storm control entries. " INDEX { stormControlInterface, stormControlType } ::= { stormControlTable 1 } StormControlEntry ::= SEQUENCE { stormControlInterface INTEGER, stormControlType PacketFlowType, stormControlTargetRate INTEGER, stormControlRowStatus RowStatus } stormControlInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS current DESCRIPTION "the storm control interface. " --风暴控制端口 ::= { stormControlEntry 1 } stormControlType OBJECT-TYPE SYNTAX PacketFlowType ACCESS read-only STATUS current DESCRIPTION "the pack flow type of the storm control. " --风暴控制报文流类型 ::= { stormControlEntry 2 } stormControlTargetRate OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-write STATUS current DESCRIPTION "the target rate of the storm control. " --风暴控制目标速率 ::= { stormControlEntry 3 } stormControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "row status of the storm control" --风暴控制行状态 ::= { stormControlEntry 4 } ----------------------------------------------------- -- the traffic rewrite vlan QOS ----------------------------------------------------- qosTrafficRewriteVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficRewriteVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-rewrite-vlan QOS entries. " ::= { gbnL2QACL 26 } qosTrafficRewriteVlanEntry OBJECT-TYPE SYNTAX QosTrafficRewriteVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-rewrite-vlan QOS entries. " INDEX { qosTrafficRewriteVlanIndex } ::= { qosTrafficRewriteVlanTable 1 } QosTrafficRewriteVlanEntry ::= SEQUENCE { qosTrafficRewriteVlanIndex INTEGER, qosTrafficRewriteVlanUserGroupName OCTET STRING, qosTrafficRewriteVlanUserGroupSubitem INTEGER, qosTrafficRewriteVlanIpGroupName OCTET STRING, qosTrafficRewriteVlanIpGroupSubitem INTEGER, qosTrafficRewriteVlanLinkGroupName OCTET STRING, qosTrafficRewriteVlanLinkGroupSubitem INTEGER, qosTrafficRewriteVlanVid INTEGER, qosTrafficRewriteVlanBlock0Priority INTEGER, qosTrafficRewriteVlanBlock1Priority INTEGER, qosTrafficRewriteVlanBlock2Priority INTEGER, qosTrafficRewriteVlanBlock3Priority INTEGER, qosTrafficRewriteVlanBlock4Priority INTEGER, qosTrafficRewriteVlanConfigSequence INTEGER, qosTrafficRewriteVlanRunning TruthValue, qosTrafficRewriteVlanRowStatus RowStatus, qosTrafficRewriteVlanBlock5Priority INTEGER, qosTrafficRewriteVlanBlock6Priority INTEGER, qosTrafficRewriteVlanBlock7Priority INTEGER, qosTrafficRewriteVlanBlock8Priority INTEGER, qosTrafficRewriteVlanBlock9Priority INTEGER, qosTrafficRewriteVlanBlock10Priority INTEGER, qosTrafficRewriteVlanBlock11Priority INTEGER } qosTrafficRewriteVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-rewrite-vlan QOS. " ::= { qosTrafficRewriteVlanEntry 1 } qosTrafficRewriteVlanUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS user group acl. " ::= { qosTrafficRewriteVlanEntry 2 } qosTrafficRewriteVlanUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS user group acl subitem. " ::= { qosTrafficRewriteVlanEntry 3 } qosTrafficRewriteVlanIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS ip group acl. " ::= { qosTrafficRewriteVlanEntry 4 } qosTrafficRewriteVlanIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS ip group acl subitem. " ::= { qosTrafficRewriteVlanEntry 5 } qosTrafficRewriteVlanLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-rewrite-vlan QOS link group acl. " ::= { qosTrafficRewriteVlanEntry 6 } qosTrafficRewriteVlanLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-rewrite-vlan QOS link group acl subitem. " ::= { qosTrafficRewriteVlanEntry 7 } qosTrafficRewriteVlanVid OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the vlan ID of the traffic-rewrite-vlan QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficRewriteVlanEntry 8 } qosTrafficRewriteVlanBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 9 } qosTrafficRewriteVlanBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 10 } qosTrafficRewriteVlanBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 11 } qosTrafficRewriteVlanBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 12 } qosTrafficRewriteVlanBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 13 } qosTrafficRewriteVlanConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-rewrite-vlan QOS." ::= { qosTrafficRewriteVlanEntry 14 } qosTrafficRewriteVlanRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-rewrite-vlan QOS." ::= { qosTrafficRewriteVlanEntry 15 } qosTrafficRewriteVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficRewriteVlanEntry 16 } qosTrafficRewriteVlanBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 17 } qosTrafficRewriteVlanBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 18 } qosTrafficRewriteVlanBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 19 } qosTrafficRewriteVlanBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 20 } qosTrafficRewriteVlanBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 21 } qosTrafficRewriteVlanBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 22 } qosTrafficRewriteVlanBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-rewrite-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficRewriteVlanEntry 23 } ----------------------------------------------------- -- the traffic insert vlan QOS ----------------------------------------------------- qosTrafficInsertVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTrafficInsertVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-insert-vlan QOS entries. " ::= { gbnL2QACL 27 } qosTrafficInsertVlanEntry OBJECT-TYPE SYNTAX QosTrafficInsertVlanEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of traffic-insert-vlan QOS entries. " INDEX { qosTrafficInsertVlanIndex } ::= { qosTrafficInsertVlanTable 1 } QosTrafficInsertVlanEntry ::= SEQUENCE { qosTrafficInsertVlanIndex INTEGER, qosTrafficInsertVlanUserGroupName OCTET STRING, qosTrafficInsertVlanUserGroupSubitem INTEGER, qosTrafficInsertVlanIpGroupName OCTET STRING, qosTrafficInsertVlanIpGroupSubitem INTEGER, qosTrafficInsertVlanLinkGroupName OCTET STRING, qosTrafficInsertVlanLinkGroupSubitem INTEGER, qosTrafficInsertVlanVid INTEGER, qosTrafficInsertVlanBlock0Priority INTEGER, qosTrafficInsertVlanBlock1Priority INTEGER, qosTrafficInsertVlanBlock2Priority INTEGER, qosTrafficInsertVlanBlock3Priority INTEGER, qosTrafficInsertVlanBlock4Priority INTEGER, qosTrafficInsertVlanConfigSequence INTEGER, qosTrafficInsertVlanRunning TruthValue, qosTrafficInsertVlanRowStatus RowStatus, qosTrafficInsertVlanBlock5Priority INTEGER, qosTrafficInsertVlanBlock6Priority INTEGER, qosTrafficInsertVlanBlock7Priority INTEGER, qosTrafficInsertVlanBlock8Priority INTEGER, qosTrafficInsertVlanBlock9Priority INTEGER, qosTrafficInsertVlanBlock10Priority INTEGER, qosTrafficInsertVlanBlock11Priority INTEGER } qosTrafficInsertVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "A unique value for each traffic-insert-vlan QOS. " ::= { qosTrafficInsertVlanEntry 1 } qosTrafficInsertVlanUserGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS user group acl. " ::= { qosTrafficInsertVlanEntry 2 } qosTrafficInsertVlanUserGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS user group acl subitem. " ::= { qosTrafficInsertVlanEntry 3 } qosTrafficInsertVlanIpGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS ip group acl. " ::= { qosTrafficInsertVlanEntry 4 } qosTrafficInsertVlanIpGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS ip group acl subitem. " ::= { qosTrafficInsertVlanEntry 5 } qosTrafficInsertVlanLinkGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) ACCESS read-write STATUS current DESCRIPTION "the name of the traffic-insert-vlan QOS link group acl. " ::= { qosTrafficInsertVlanEntry 6 } qosTrafficInsertVlanLinkGroupSubitem OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS current DESCRIPTION "the number of the traffic-insert-vlan QOS link group acl subitem. " ::= { qosTrafficInsertVlanEntry 7 } qosTrafficInsertVlanVid OBJECT-TYPE SYNTAX INTEGER (1..28) ACCESS read-write STATUS current DESCRIPTION "the vlan ID of the traffic-insert-vlan QOS.1－24 for fast-ethernet port 1－24，25－26 for giga-ethernet port 1－2，28 for CPU port，27 is invaild value. " ::= { qosTrafficInsertVlanEntry 8 } qosTrafficInsertVlanBlock0Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 0 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 9 } qosTrafficInsertVlanBlock1Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 1 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 10 } qosTrafficInsertVlanBlock2Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 2 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 11 } qosTrafficInsertVlanBlock3Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 3 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 12 } qosTrafficInsertVlanBlock4Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 4 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 13 } qosTrafficInsertVlanConfigSequence OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS current DESCRIPTION "the config sequence of the traffic-insert-vlan QOS." ::= { qosTrafficInsertVlanEntry 14 } qosTrafficInsertVlanRunning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the running status of the traffic-insert-vlan QOS." ::= { qosTrafficInsertVlanEntry 15 } qosTrafficInsertVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTrafficInsertVlanEntry 16 } qosTrafficInsertVlanBlock5Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 5 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 17 } qosTrafficInsertVlanBlock6Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 6 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 18 } qosTrafficInsertVlanBlock7Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 7 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 19 } qosTrafficInsertVlanBlock8Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 8 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 20 } qosTrafficInsertVlanBlock9Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 9 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 21 } qosTrafficInsertVlanBlock10Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 10 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 22 } qosTrafficInsertVlanBlock11Priority OBJECT-TYPE SYNTAX INTEGER(0..16) ACCESS read-only STATUS current DESCRIPTION "the block 11 priority of the traffic-insert-vlan QOS. 16 means no filter rules in the Hardware." ::= { qosTrafficInsertVlanEntry 23 } ----------------------------------------------------- -- the two rate policer ----------------------------------------------------- qosTwoRatePolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF QosTwoRatePolicerEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of two rate policer entries. " ::= { gbnL2QACL 28 } qosTwoRatePolicerEntry OBJECT-TYPE SYNTAX QosTwoRatePolicerEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of two rate policer entries. " INDEX { qosTwoRatePolicerId } ::= { qosTwoRatePolicerTable 1 } QosTwoRatePolicerEntry ::= SEQUENCE { qosTwoRatePolicerId INTEGER, qosTwoRatePolicerCir INTEGER, qosTwoRatePolicerCbs INTEGER, qosTwoRatePolicerPir INTEGER, qosTwoRatePolicerPbs INTEGER, qosTwoRatePolicerColorAware TruthValue, qosTwoRatePolicerL2PriorityRemark TruthValue, qosTwoRatePolicerL3PriorityRemark TruthValue, qosTwoRatePolicerRemarkDscpCos TruthValue, qosTwoRatePolicerRemarkTrafficClass TruthValue, qosTwoRatePolicerDropRed TruthValue, qosTwoRatePolicerUseNum INTEGER, qosTwoRatePolicerRowStatus RowStatus } qosTwoRatePolicerId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the two rate policer ID. " ::= { qosTwoRatePolicerEntry 1 } qosTwoRatePolicerCir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the two rate policer Committed Information Rate(CIR). " ::= { qosTwoRatePolicerEntry 2 } qosTwoRatePolicerCbs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the two rate policer Committed Burst Size(CBS). " ::= { qosTwoRatePolicerEntry 3 } qosTwoRatePolicerPir OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the two rate policer Peak Information Rate(PIR). " ::= { qosTwoRatePolicerEntry 4 } qosTwoRatePolicerPbs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the two rate policer Peak Burst Size(PBS). " ::= { qosTwoRatePolicerEntry 5 } qosTwoRatePolicerColorAware OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "the status of the two rate policer color aware mode. " ::= { qosTwoRatePolicerEntry 6 } qosTwoRatePolicerL2PriorityRemark OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This value determines whether re-marking of packets is done based on Traffic Class or CoS fields determined by previous marking mechanism(i.e. Bridge, Policy, InLIF). " ::= { qosTwoRatePolicerEntry 7 } qosTwoRatePolicerL3PriorityRemark OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This value determines whether re-marking for IP packets is done based on DSCP field." ::= { qosTwoRatePolicerEntry 8 } qosTwoRatePolicerRemarkDscpCos OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This value determines if the DSCP and CoS are re-marked. " ::= { qosTwoRatePolicerEntry 9 } qosTwoRatePolicerRemarkTrafficClass OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This value determines if the traffic class are re-marked. " ::= { qosTwoRatePolicerEntry 10 } qosTwoRatePolicerDropRed OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This value determines whether packets which are marked red by the traffic policing mechanism will be droped. " ::= { qosTwoRatePolicerEntry 11 } qosTwoRatePolicerUseNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the number of QoS which use this two rate policer . " ::= { qosTwoRatePolicerEntry 12 } qosTwoRatePolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { qosTwoRatePolicerEntry 13 } ----------------------------------------------------- -- the L2 priority remark table ----------------------------------------------------- qosL2PriorityRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF QosL2PriorityRemarkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of L2 priority remark entries. " ::= { gbnL2QACL 29 } qosL2PriorityRemarkEntry OBJECT-TYPE SYNTAX QosL2PriorityRemarkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of L2 priority remark entries. " INDEX { qosL2PriorityRemarkColor, qosL2PriorityRemarkOldCos } ::= { qosL2PriorityRemarkTable 1 } QosL2PriorityRemarkEntry ::= SEQUENCE { qosL2PriorityRemarkColor INTEGER, qosL2PriorityRemarkOldCos INTEGER, qosL2PriorityRemarkDscp INTEGER, qosL2PriorityRemarkDropPrecedence INTEGER, qosL2PriorityRemarkTrafficClass INTEGER, qosL2PriorityRemarkCos INTEGER } qosL2PriorityRemarkColor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the color of the packet. " ::= { qosL2PriorityRemarkEntry 1 } qosL2PriorityRemarkOldCos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the old CoS of the packet. " ::= { qosL2PriorityRemarkEntry 2 } qosL2PriorityRemarkDscp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the DSCP applied to the packet. " ::= { qosL2PriorityRemarkEntry 3 } qosL2PriorityRemarkDropPrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the drop precedence applied to the packet. " ::= { qosL2PriorityRemarkEntry 4 } qosL2PriorityRemarkTrafficClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the traffic class applied to the packet. " ::= { qosL2PriorityRemarkEntry 5 } qosL2PriorityRemarkCos OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the CoS applied to the packet. " ::= { qosL2PriorityRemarkEntry 6 } ----------------------------------------------------- -- the L3 priority remark table ----------------------------------------------------- qosL3PriorityRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF QosL3PriorityRemarkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of L3 priority remark entries. " ::= { gbnL2QACL 30 } qosL3PriorityRemarkEntry OBJECT-TYPE SYNTAX QosL3PriorityRemarkEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of L3 priority remark entries. " INDEX { qosL3PriorityRemarkColor, qosL3PriorityRemarkOldDscp } ::= { qosL3PriorityRemarkTable 1 } QosL3PriorityRemarkEntry ::= SEQUENCE { qosL3PriorityRemarkColor INTEGER, qosL3PriorityRemarkOldDscp INTEGER, qosL3PriorityRemarkDscp INTEGER, qosL3PriorityRemarkDropPrecedence INTEGER, qosL3PriorityRemarkTrafficClass INTEGER, qosL3PriorityRemarkCos INTEGER } qosL3PriorityRemarkColor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the color of the packet. " ::= { qosL3PriorityRemarkEntry 1 } qosL3PriorityRemarkOldDscp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "the old DSCP of the packet. " ::= { qosL3PriorityRemarkEntry 2 } qosL3PriorityRemarkDscp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the DSCP applied to the packet. " ::= { qosL3PriorityRemarkEntry 3 } qosL3PriorityRemarkDropPrecedence OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the drop precedence applied to the packet. " ::= { qosL3PriorityRemarkEntry 4 } qosL3PriorityRemarkTrafficClass OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the traffic class applied to the packet. " ::= { qosL3PriorityRemarkEntry 5 } qosL3PriorityRemarkCos OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "the CoS applied to the packet. " ::= { qosL3PriorityRemarkEntry 6 } ----------------------------------------------------- -- the trTCM mode ----------------------------------------------------- qosRateLimittrTCMMode OBJECT IDENTIFIER ::= { gbnL2QACL 31 } trTCMMode OBJECT-TYPE SYNTAX INTEGER{ colore-aware(1), color_blind(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "two rate three color marking mode." ::= { qosRateLimittrTCMMode 1 } trTCMPreColorValue OBJECT-TYPE SYNTAX INTEGER{ green(0), red(1), yellow(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "two rate three color marking pre-color value." ::= { qosRateLimittrTCMMode 2 } ------------------------------------------------------------- ----acl ipv6 mode ------------------------------------------------------------- aclIpv6KeyMode OBJECT-TYPE SYNTAX INTEGER{ mac(1), destination_ip(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "mode of ipv6 key,mac(1) means acl-rules can inlcude mac-address,but only include 120~127 bits of destination ipaddressv6. destination_ip(2) means acl-rules can include all 128 bits of destination ipaddressv6,but can not include mac-address." ::= { gbnL2QACL 32 } END