GBNPlatformOAM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF gbnPlatform FROM ADMIN-MASTER-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB PortList, dot1qStaticMulticastEntry FROM Q-BRIDGE-MIB; gbnPlatformOAM MODULE-IDENTITY LAST-UPDATED "0011020000Z" -- November 2, 2000 ORGANIZATION "Admin Co., Ltd." CONTACT-INFO "Admin Co., Ltd. E-mail: support@admin.com" DESCRIPTION "ADMIN Common Enterprise MIB definition." REVISION "0011020000Z" -- November 2, 2000 DESCRIPTION "Initial MIB creation." ::= { gbnPlatform 1 } ------------------------------------------------------------------------------ -- define groups in GBN-COMMON-MIB ------------------------------------------------------------------------------ gbnPlatformOAMSysIf OBJECT IDENTIFIER ::= { gbnPlatformOAM 1 } gbnPlatformOAMSystem OBJECT IDENTIFIER ::= { gbnPlatformOAM 2 } gbnPlatformOAMIpAccessControl OBJECT IDENTIFIER ::= { gbnPlatformOAM 3 } gbnPlatformOAMWatchDog OBJECT IDENTIFIER ::= { gbnPlatformOAM 4 } gbnPlatformOAMMuser OBJECT IDENTIFIER ::= { gbnPlatformOAM 5 } gbnPlatformOAMUpDownLoad OBJECT IDENTIFIER ::= { gbnPlatformOAM 6 } gbnPlatformOAMSnmp OBJECT IDENTIFIER ::= { gbnPlatformOAM 7 } gbnPlatformOAMSntpClient OBJECT IDENTIFIER ::= { gbnPlatformOAM 8 } gbnPlatformOAMSyslog OBJECT IDENTIFIER ::= { gbnPlatformOAM 9 } gbnPlatformOAMPortCar OBJECT IDENTIFIER ::= { gbnPlatformOAM 10 } gbnPlatformOAMSsh OBJECT IDENTIFIER ::= { gbnPlatformOAM 11 } gbnPlatformOAMMailalarm OBJECT IDENTIFIER ::= { gbnPlatformOAM 12 } gbnPlatformOAMVctRun OBJECT IDENTIFIER ::= { gbnPlatformOAM 13 } gbnPlatformOAMVctRunResult OBJECT IDENTIFIER ::= { gbnPlatformOAM 14 } gbnPlatformOAMTelnet OBJECT IDENTIFIER ::= { gbnPlatformOAM 15 } gbnPlatformOAMIpControl OBJECT IDENTIFIER ::= { gbnPlatformOAM 16 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMSysIf - System IP Group -- -- This group include manually config system ip-address,or using dhcp/bootp client, -- and manageVLAN. -- ------------------------------------------------------------------------------ -- sysIfMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the gbn agent for its in-band ports." ::= { gbnPlatformOAMSysIf 1 } sysIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'." ::= { gbnPlatformOAMSysIf 2 } sysIfIPGateAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'." ::= { gbnPlatformOAMSysIf 3 } sysIfIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'." ::= { gbnPlatformOAMSysIf 4 } sysIfIPStatus OBJECT-TYPE SYNTAX INTEGER { notModified(1), modified(2), restore(3), apply(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMPBADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3)." ::= { gbnPlatformOAMSysIf 5 } sysIfBOOTPOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable BOOTP operation for the gbn agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the Application sends BOOTP requests during system startup." ::= { gbnPlatformOAMSysIf 7 } sysIfDHCPOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable DHCP operation for the gbn agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Application sends DHCP requests during system startup." ::= { gbnPlatformOAMSysIf 8 } sysIfManageVLANTbale OBJECT-TYPE SYNTAX SEQUENCE OF SysIfManageVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ManageVlan table" --管理VLAN表格。 ::= { gbnPlatformOAMSysIf 9 } sysIfManageVLANEntry OBJECT-TYPE SYNTAX SysIfManageVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ManageVlan entry" --管理VLAN实体。 INDEX { sysIfManageVLANVid } ::= { sysIfManageVLANTbale 1 } SysIfManageVLANEntry ::= SEQUENCE { sysIfManageVLANVid INTEGER, sysIfManageVLANRowStatus RowStatus } sysIfManageVLANVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "ManageVLAN-ID, as an index, the maximum number is 26." --管理VLAN，作为索引。最多可以创建26个。 ::= { sysIfManageVLANEntry 1 } sysIfManageVLANRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS current DESCRIPTION "ManageVLAN status" ::= { sysIfManageVLANEntry 2 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMSystem - System Group -- ------------------------------------------------------------------------------ softwarePlate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software platform used by switches." --交换机采用的软件平台。 ::= { gbnPlatformOAMSystem 1 } softwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version, the format is V100R001B02D06P03SP3" --软件版本，格式为V100R001B02D06P03SP3 ::= { gbnPlatformOAMSystem 2 } softwareCompiledTimeE OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00" --软件编译时间，格式为Feburary 17 2003 15:47:00 ::= { gbnPlatformOAMSystem 3 } softwareCompiledTimeC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software Compiled time displayed in Chinese, the format is 2003nian06yue18ri13dian15fen" --软件编译时间，格式为2003年06月18日13点15分 ::= { gbnPlatformOAMSystem 4 } cpuDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "System CPU description, the format is Mips 32334, 133MHz" --系统CPU描述，格式为Mips 32334, 133MHz ::= { gbnPlatformOAMSystem 5 } sdramDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Memery description, the format is 32M" --系统内存描述，格式为32M ::= { gbnPlatformOAMSystem 6 } flashDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "System Flash description, the format is 4096k" --系统FLASH描述，格式为4096k ::= { gbnPlatformOAMSystem 7 } hardwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware version, the format is V3.0" --系统主板的版本号，格式为V3.0 ::= { gbnPlatformOAMSystem 8 } bootromVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bootrom version, the format is V2.0" --系统主板的版本号，格式为V2.0 ::= { gbnPlatformOAMSystem 9 } hostName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "System host name" ::= { gbnPlatformOAMSystem 10 } cpuIdle OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of free CPU in the current system." ::= { gbnPlatformOAMSystem 11 } memorySize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current system memory size, unit is byte." ::= { gbnPlatformOAMSystem 12 } memoryIdle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current system free memory size, unit is byte." ::= { gbnPlatformOAMSystem 13 } systemClock OBJECT IDENTIFIER ::= { gbnPlatformOAMSystem 14 } clockTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099" ::= { systemClock 1 } timeZoneName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "the timezone name,1-32 letters.eg CCT(China Coast, USSR Zone 7)" ::= { systemClock 2 } timeZoneOffset OBJECT-TYPE SYNTAX Integer32 (0..86399) MAX-ACCESS read-write STATUS current DESCRIPTION "seconds between current timezone and GMT " ::= { systemClock 3 } offsetNegFlag OBJECT-TYPE SYNTAX INTEGER{ true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "earlier or latter than GMT,it is true when timeZoneOffset is negative" ::= { systemClock 4 } productName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 'WindRiver gbn Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages." ::= { gbnPlatformOAMSystem 15 } systemReset OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation reset(2), -- reset unit resetToDefaults(3) -- reset to factory defaults/reset unit } MAX-ACCESS read-write STATUS current DESCRIPTION "Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation." ::= { gbnPlatformOAMSystem 16 } writeConfig OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation save(2), -- save all configuration parameters to NVM saveInProgress(3), -- read-only: NVM save in progress saveFailed(4) -- read-only: NVM save failed } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned if the save operation is succeeded, otherwise 'saveFailed(4)' is returned. Consequently, a get operation always returns 'noop(1)', 'saveInProgress(3)' or 'saveFailed(4) depending on the current state and the result of the save operation. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3." ::= { gbnPlatformOAMSystem 17 } ------------------------------------------------------------------------------ -- define groups in GBN-COMMON-MIB ------------------------------------------------------------------------------ saveNMInterfaceConfig OBJECT IDENTIFIER ::= { gbnPlatformOAMSystem 18 } ------------------------------------------------------------------------------ -- -- saveNMInterfaceConfig - Save nminterface configuration Group -- ------------------------------------------------------------------------------ nmInterfaceId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "interface id of vlan saved for nminterface configuration." --此节点用于存储vlan接口ID。当值为0时默认为vlan 1 的接口。 ::= { saveNMInterfaceConfig 1 } nmInterfaceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "ip address saved for nminterface configuration." --此节点用于存储vlan接口的ip地址。 ::= { saveNMInterfaceConfig 2 } nmInterfaceNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "mask saved for nminterface configuration. " --此节点用于存储vlan接口的掩码。 ::= { saveNMInterfaceConfig 3 } nmInterfaceGateAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "gateway address saved for nminterface configuration. " --此节点用于存储vlan接口的网关地址。 ::= { saveNMInterfaceConfig 4 } writeNMInterfaceConifig OBJECT-TYPE SYNTAX INTEGER{ saveNmconfig(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "We save the nminterface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nminterface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nminterface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'. " --我们通过设置这个Mib来保存最小管理配置，当设此Mib的值为1时，ccd模块将调用相应的处理函数 --来保存和最小配置相关的信息。此处理函数一开始就将writeNMInterfaceConifigStatus的值设为2， --然后依次读取nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask,nmInterfaceGateAddress --节点中的值，以这些值作为参数对和最小配置相关的信息进行保存。等到完成保存操作，如果成功保存， --处理函数将writeNMInterfaceConifigStatus值设为1，失败设置为相应错误状态为3－11。 --补充：nmInterfaceId，nmInterfaceIpAddress, nmInterfaceNetMask,nmInterfaceGateAddress --4个节点的值可以都不设置。 如果设置了nmInterfaceId节点，后三个节点可以不设置，但如果设置了 --nmInterfaceIpAddress节点的值，nmInterfaceNetMask, nmInterfaceGateAddress的值必须设置。如果 --没有设置nmInterfaceIpAddress节点的值，后两个就不能设置。如果nmInterfaceId节点没有设置， --后三个就都不能设置。 ::= { saveNMInterfaceConfig 5 } writeNMInterfaceConifigStatus OBJECT-TYPE SYNTAX INTEGER{ saveSuccess(1), -- NVM save succeeded saveInProgress(2), -- read-only: NVM save in progress saveFailed(3), -- read-only: NVM save failed noInterface(4), -- the vlan interface doesn't exist noIpAddress(5), -- no ip for the vlan interface differentSubnet(6), -- ip address and gateway address are not in the same subnet noInterfaceParameter(7), -- need to input a vlan interface noIpAddressParameter(8), -- need to input an ip address noMaskParameter(9), -- need to input a mask noGatewayParameter(10), -- need to input a gateway address invalidIpOrMask(11) -- the ip address or mask is invalid } MAX-ACCESS read-only STATUS current DESCRIPTION "Reserve the status of process in saving Nmconfig." --存储保存最小管理配置过程中的状态。 ::= { saveNMInterfaceConfig 6 } prodSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product Serial Number" --产品序列号 ::= { gbnPlatformOAMSystem 19 } cpuBusyStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "CPU busy status" --CPU忙状态 ::= { gbnPlatformOAMSystem 20 } cpuBusyAlarmEnable OBJECT-TYPE SYNTAX TruthValue { true (1), false (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the enable status of cpu busy alarm." --CPU忙告警开启/关闭状态 DEFVAL {true} ::= { gbnPlatformOAMSystem 21 } cpuBusyThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CPU busy threshold." --CPU忙的阈值 ::= { gbnPlatformOAMSystem 22 } cpuUnbusyThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CPU unbusy threshold." --CPU不忙的阈值 ::= { gbnPlatformOAMSystem 23 } ------------------------------------------------------------------------------ -- -- cpuStatusTrap - CPU status TRAP -- ------------------------------------------------------------------------------ cpuStatusTrap OBJECT IDENTIFIER ::= { gbnPlatformOAMSystem 24 } cpuBusyTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "cpu busy trap." --CPU 忙TRAP ::= { cpuStatusTrap 1 } cpuUnbusyTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "cpu unbusy trap." --CPU 不忙TRAP ::= { cpuStatusTrap 2 } ------------------------------------------------------------------------------ -- -- dramStatusTrap - DRAM status -- ------------------------------------------------------------------------------ dramAlarmEnable OBJECT-TYPE SYNTAX TruthValue { true (1), false (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the enable status of dram alarm." --DRAM警开启/关闭状态 DEFVAL {true} ::= { gbnPlatformOAMSystem 25 } dramAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the DRAM set alarm threshold." --DRAM使用的利用率超出实际利用率 ::= { gbnPlatformOAMSystem 26 } dramStatus OBJECT-TYPE SYNTAX TruthValue { true (1), false (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "DRAM Status（Beyond the threshold）." --DRAM是否超出阈值（利用率） ::= { gbnPlatformOAMSystem 27 } dramUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "DRAM Utilization." --DRAM的利用率 ::= { gbnPlatformOAMSystem 28 } dramStatusTrap OBJECT IDENTIFIER ::= { gbnPlatformOAMSystem 29 } dramBusyTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "dram trap." --DRAM TRAP ::= { dramStatusTrap 1 } copyRunSta OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation op(2) -- operation } MAX-ACCESS read-write STATUS current DESCRIPTION "copy running-config startup-config." ::= { gbnPlatformOAMSystem 30 } copyStaRun OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation op(2) -- operation } MAX-ACCESS read-write STATUS current DESCRIPTION "copy startup-config running-config." ::= { gbnPlatformOAMSystem 31 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMIpAccessControl - IP Access Control Group -- ------------------------------------------------------------------------------ ipAccessControlTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAccessControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address access control table." --能够访问交换机的ip地址列表. ::= { gbnPlatformOAMIpAccessControl 1 } ipAccessControlEntry OBJECT-TYPE SYNTAX IpAccessControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address access control entry." --能够访问交换机的ip地址列表. INDEX { controlIpAddress, controlIpMask, controlTeminal} ::= { ipAccessControlTable 1 } IpAccessControlEntry ::= SEQUENCE { controlIpAddress IpAddress, controlIpMask IpAddress, controlTeminal INTEGER, controlStatus INTEGER } controlIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The accessible ip address of the switch" --能够访问交换机的ip地址. ::= { ipAccessControlEntry 1 } controlIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The accessible ip address mask of the switch, wildcard supports mask and unmask" --能够访问交换机的ip地址掩码, 通配符支持掩码和反掩码. ::= { ipAccessControlEntry 2 } controlTeminal OBJECT-TYPE SYNTAX INTEGER { snmp(1), web(2), telnet(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet." --访问交换机客户端类型。snmp(1)表示通过snmp网管访问，web(2)表示通过web网管访问，telnet(3)表示通过telnet网管访问. ::= { ipAccessControlEntry 3 } controlStatus OBJECT-TYPE SYNTAX INTEGER { active(1), destroy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list" --ip地址状态, active(1)表示加入到活动列表;destroy(2)表示将此ip地址删除。 ::= { ipAccessControlEntry 4 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMWatchDog - Watch Dog Group -- ------------------------------------------------------------------------------ softDogProxy OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the soft dog." ::= { gbnPlatformOAMWatchDog 1 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMMuser - Manage User Group -- ------------------------------------------------------------------------------ musrTable OBJECT-TYPE SYNTAX SEQUENCE OF MusrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of usrname and Password." ::= { gbnPlatformOAMMuser 1 } musrEntry OBJECT-TYPE SYNTAX MusrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of usr parameters." INDEX { musrIndex } ::= { musrTable 1 } MusrEntry ::= SEQUENCE { musrIndex Integer32, musrName DisplayString, musrPassword DisplayString, musrPwdEncrypt INTEGER, musrType INTEGER, musrRowStatus INTEGER } musrIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A simple index into 'gbnCommonUsrTable'." ::= { musrEntry 1 } musrName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " A simple usrname of gbnCommonUsrEntry." ::= { musrEntry 2 } musrPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " A simple password of gbnCommonUsrEntry." ::= { musrEntry 3 } musrPwdEncrypt OBJECT-TYPE SYNTAX INTEGER { clearText(0), encrypt(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 0 } Password in 'gbnCommonUsrTable' is in format of clear text(0) or enrypt(7)." ::= { musrEntry 6 } musrType OBJECT-TYPE SYNTAX INTEGER { normalUser0(0), normalUser1(1), administrator2(2), administrator3(3), administrator4(4), administrator5(5), administrator6(6), administrator7(7), administrator8(8), administrator9(9), administrator10(10), administrator11(11), administrator12(12), administrator13(13), administrator14(14), administrator15(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { NormalUser } A simple UsrType into 'gbnCommonUsrTable'. when 'NomalUser' configuration is limitted" ::= { musrEntry 4 } musrRowStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } A simple RowStatus into 'gbnCommonUsrTable'. when 'disable' the user is deleted" ::= { musrEntry 5 } manageUserAuthenType OBJECT-TYPE SYNTAX INTEGER { locacl(1), radius(2), radiusFailLocal(3), tacacsplus(4), tacacsplusFailLocal(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication method，1:local, 2:radius, 3:radius first，and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed." --管理用户认证方式，1:本地方式, 2:radius认证,3:先radius认证，radius服务器连接失败后Local，4:tacacs+认证，5:先tacacs+认证，tacacs+服务器连接失败后Local. ::= { gbnPlatformOAMMuser 2 } manageUserAuthenRadiusName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "radius server name." --radius服务器方案名称. ::= { gbnPlatformOAMMuser 3 } manageUserAuthChallegeType OBJECT-TYPE SYNTAX INTEGER{ chap(1), pap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radius authentication method，1:CHAP, 2:PAP." --管理用户radius认证方式，1:CHAP, 2:PAP. ::= { gbnPlatformOAMMuser 4 } manageUserTacacsAuthor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "authorization afer authenticastion." --在tacacs认证后是否进行shell授权. ::= { gbnPlatformOAMMuser 5 } manageUserTacacsAccount OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "accounting after authorization." --用户在使用tacacs+认证后登录/退出时发送计费操作. ::= { gbnPlatformOAMMuser 6 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMUpDownLoad - Upload/Download Group -- ------------------------------------------------------------------------------ loadTftpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files." ::= { gbnPlatformOAMUpDownLoad 1 } loadTftpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The TFTP file path and name." ::= { gbnPlatformOAMUpDownLoad 2 } loadType OBJECT-TYPE SYNTAX INTEGER { application(1), normalBootRom(2), configuration(3), bootCode(4), alarm(5), syslog(6), wholeBootRom(7), oltImage(8), onuImage(9), geApplication(10), geBootRom(11), 10geApplication(12), 10geBootRom(13), eponApplication(14), eponBootRom(15), 10geponApplication(16), 10geponBootRom(17), gponApplication(18), gponBootRom(19) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { application } The type of file to download or upload upon an 'gbnCommonLoadExecute'. application:program file of the switch configuration:configuration file,should be uploaded before you download it. miccode:microcode is the program file of vdsl chip. removed during the boot Flash write operation, the agent cannot be recovered)." ::= { gbnPlatformOAMUpDownLoad 3 } loadExecute OBJECT-TYPE SYNTAX INTEGER { noop(1), -- no operation downloadTftp(2), -- Application, Boot, or Configuration uploadTftp(3), -- Configuration only downloadFtp(4), -- Application, Boot, or Configuration uploadFtp(5), -- Configuration only downloadXmodem(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'gbnCommonLoadExecuteStatus' to determine the status of the executed load." ::= { gbnPlatformOAMUpDownLoad 4 } loadExecuteStatus OBJECT-TYPE SYNTAX INTEGER { notStarted(1), -- download has not yet started inProgressTftp(2), -- download has not yet finished successTftp(3), -- download has finished successfully errorConnectionTftp(4), -- download cannot connect errorFilenameTftp(5), -- download has bad image path/filename errorFaultTftp(6), -- download has fault condition on device inProgressFtp(7), -- download has not yet finished successFtp(8), -- download has finished successfully errorConnectionFtp(9), -- download cannot connect errorFilenameFtp(10), -- download has bad image path/filename errorFaultFtp(11), -- download has fault condition on device inProgressXmodem(12), -- download has not yet finished successXmodem(13), -- download has finished successfully errorConnectionXmodem(14), -- download cannot connect errorFilenameXmodem(15), -- download has bad image path/filename errorFaultXmodem(16) -- download has fault condition on device } MAX-ACCESS read-only STATUS current DESCRIPTION "Provides status on the execute file load progress." ::= { gbnPlatformOAMUpDownLoad 5 } loadFtpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The IP Address for the FTP server used for downloading and/or uploading files." ::= { gbnPlatformOAMUpDownLoad 6 } loadFtpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The FTP file path and name." ::= { gbnPlatformOAMUpDownLoad 7 } loadFtpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The FTP user name." ::= { gbnPlatformOAMUpDownLoad 8 } loadFtpUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: The FTP user password." ::= { gbnPlatformOAMUpDownLoad 9 } FtpdOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable Ftpd." ::= { gbnPlatformOAMUpDownLoad 10 } FtpdAnonymousOnOff OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { disable } Enable/Disable Ftpd anonymous login." ::= { gbnPlatformOAMUpDownLoad 11 } loadSlotID OBJECT-TYPE SYNTAX INTEGER(0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Slot ID" ::= { gbnPlatformOAMUpDownLoad 12 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMSnmp - Snmp Group -- ------------------------------------------------------------------------------ snmpCommunityToViewTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpCommunityToViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMPv1/v2c community string to view name mappings." ::= { gbnPlatformOAMSnmp 1 } snmpCommunityToViewEntry OBJECT-TYPE SYNTAX SnmpCommunityToViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of community-to-view parameters." INDEX { snmpComm2ViewIndex } ::= { snmpCommunityToViewTable 1 } SnmpCommunityToViewEntry ::= SEQUENCE { snmpComm2ViewIndex Integer32, snmpComm2ViewCommName DisplayString, snmpComm2ViewViewName SnmpAdminString, snmpComm2ViewPermission INTEGER, snmpComm2ViewRowStatus RowStatus } snmpComm2ViewIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A simple index into 'gbnCommonCommunityToViewTable'." ::= { snmpCommunityToViewEntry 1 } snmpComm2ViewCommName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name (i.e., a null string forces 'gbnCommonComm2ViewRowStatus' to 'notReady(3)')." ::= { snmpCommunityToViewEntry 2 } snmpComm2ViewViewName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTreeFamilyTable' (see RFC2575). If a match is found and the varbind(s) specify valid object type and instance, the 'gbnCommonComm2ViewPermission' privilege is permitted. Note that a null string is not a valid view name value. Also note that the value of this object does not have to match an existing entry in the 'vacmViewTreeFamilyTable' (if no match, no access is allowed). Note that the factory default value for this object is 'internet', which allows access to the subtree under '1.3.6.1'." ::= { snmpCommunityToViewEntry 3 } snmpComm2ViewPermission OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SET operations." ::= { snmpCommunityToViewEntry 4 } snmpComm2ViewRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)')." ::= { snmpCommunityToViewEntry 5 } snmpNotifyTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpNotifyTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of SNMPv1/v2c notify type ." ::= { gbnPlatformOAMSnmp 2 } snmpNotifyTypeEntry OBJECT-TYPE SYNTAX SnmpNotifyTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of notify type parameters." INDEX { snmpPrivateNotifyType } ::= { snmpNotifyTypeTable 1 } SnmpNotifyTypeEntry ::= SEQUENCE { snmpPrivateNotifyType DisplayString, snmpNotifyTypeStatus INTEGER } snmpPrivateNotifyType OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "notify type." -- 通告类型 ::= { snmpNotifyTypeEntry 1 } snmpNotifyTypeStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It signifies if the traps with corresponding notify-type can be sent." -- 如果通告对应状态为"enable(1)"表示可以发送此类型的通告，否则不可发送。 ::= { snmpNotifyTypeEntry 2 } gbnPlatformOAMSnmpNotifyType OBJECT IDENTIFIER ::= { gbnPlatformOAMSnmp 3 } snmpNotifyTypeSaveConfiguration NOTIFICATION-TYPE STATUS current DESCRIPTION "A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration." -- 私有的trap类型。发送此类型的trap表示设备刚才有保存配置文件的操作。 ::= { gbnPlatformOAMSnmpNotifyType 1 } snmpTrapSource OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11." -- trap或inform的源地址所属vlan或supervlan。vlan id：0-4094； -- supervlan id：0-11。本节点值为0表示不指定Trap源地址接口。当 -- snmpTrapSourceType节点值为1时，本节点取值范围为0-4094；当 -- snmpTrapSourceType节点值为2时，本节点取值范围为0-11。 ::= { gbnPlatformOAMSnmp 4 } snmpRemoteEngineTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpRemoteEngineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of remote engine ." ::= { gbnPlatformOAMSnmp 5 } snmpRemoteEngineEntry OBJECT-TYPE SYNTAX SnmpRemoteEngineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of remote engine." INDEX { snmpRemoteEngineID } ::= { snmpRemoteEngineTable 1 } SnmpRemoteEngineEntry ::= SEQUENCE { snmpRemoteHostTAddr OCTET STRING, snmpRemoteEngineID DisplayString, snmpDeleteRemoteEngineTableRow INTEGER } snmpRemoteEngineID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remote engine's id.Note that the engine id can only appear once in the table." -- 远程引擎id。 ::= { snmpRemoteEngineEntry 1 } snmpRemoteHostTAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table." -- 远程主机ip和端口号,前四位为主机ip后两位为端口号。其值和一个引擎id必须一一对应， -- 不能出现一对多的情况。一个引擎id只能对应一个主机ip和端口号。 ::= { snmpRemoteEngineEntry 2 } snmpDeleteRemoteEngineTableRow OBJECT-TYPE SYNTAX INTEGER { deleteRow(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "You can delete a row by setting the value to 'deleteRow(1)'." -- 设置此对象实例值为1将删除此实例所在行。 ::= { snmpRemoteEngineEntry 3 } snmpTrapSourceType OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface." -- trap或inform的源地址接口的类型。1：vlan接口类型；2：supervlan接 -- 口类型（要设置为此类型必须确保snmpTrapSource节点的值不大于11）。 -- 配置Trap源地址接口时，请先设置snmpTrapSource节点的值为0，再设置 -- 本节点的值，然后再设置snmpTrapSource节点的值为指定vlan或 -- supervlan的接口id。 ::= { gbnPlatformOAMSnmp 6 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMPortCar - Port Car Group -- ------------------------------------------------------------------------------ portCarTable OBJECT-TYPE SYNTAX SEQUENCE OF PortCarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of port CAR." --端口CAR表 ::= { gbnPlatformOAMPortCar 1 } portCarEntry OBJECT-TYPE SYNTAX PortCarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port CAR." --端口CAR列表 INDEX { portCarPort } ::= { portCarTable 1 } PortCarEntry ::= SEQUENCE { portCarPort Integer32, portCarEnable TruthValue, portDiscardBpdu Integer32, portCarRateBpdu Integer32 } portCarPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number." --端口号，端口CAR表的索引值 ::= { portCarEntry 1 } portCarEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the port CAR" --端口CAR开启/关闭状态 ::= { portCarEntry 2 } portDiscardBpdu OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the port discard BPDU" --端口discard BPDU开启/关闭状态 ::= { portCarEntry 3 } portCarRateBpdu OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The port CAR max packet receive rate." --端口CAR的值 ::= { portCarEntry 4 } portCarGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The global enable status of port CAR." --全局端口CAR开启/关闭状态 ::= { gbnPlatformOAMPortCar 2 } portCarOpenTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The closed port Re-open time." --被端口CAR关闭的端口重新打开的时间 ::= { gbnPlatformOAMPortCar 3 } discardBpdu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "discard specific BPDU, bit 0 for STP packet, bit 1 for GVRP packet, bit 2 for GMRP packet." --丢弃BPDU标记，以位图形式记录BPDU的丢弃状态。第0位表示STP报文，第1位表示GVRP报文，第2位表示GMRP报文 ::= { gbnPlatformOAMPortCar 4 } portCarRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The global port CAR max packet receive rate." --端口CAR的值 ::= { gbnPlatformOAMPortCar 5 } cpuCarRate OBJECT-TYPE SYNTAX INTEGER (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU CAR max packet receive rate. value 0 is default 400/4000 pps" --CPU CAR的值, 配置为0时, 设置CPU-CAR为默认值400/4000pps ::= { gbnPlatformOAMPortCar 6 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMVctRun - Vct Run Group -- ------------------------------------------------------------------------------ vctRunTable OBJECT-TYPE SYNTAX SEQUENCE OF VctRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of VCT run." --VCT run表 ::= { gbnPlatformOAMVctRun 1 } vctRunEntry OBJECT-TYPE SYNTAX VctRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of VCT run." --VCT run列表 INDEX { vctRunPort } ::= { vctRunTable 1 } VctRunEntry ::= SEQUENCE { vctRunPort Integer32, vctRunEnable TruthValue, vctAutoRunEnable TruthValue } vctRunPort OBJECT-TYPE SYNTAX Integer32 (1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number." --端口号，VCT run表的索引值 ::= { vctRunEntry 1 } vctRunEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the VCT run" --是否启动VCT run ::= { vctRunEntry 2 } vctAutoRunEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable status of the VCT auto run" --是否启动VCT auto run ::= { vctRunEntry 3 } vctAutoRunGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The global enable status of VCT auto run." --全局VCT auto run开启/关闭状态 ::= { gbnPlatformOAMVctRun 2 } vctRunGlobalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The global enable status of VCT run." --全局VCT run开启/关闭状态 ::= { gbnPlatformOAMVctRun 3 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMVctRunResult - Vct Run Result Group -- ------------------------------------------------------------------------------ vctRunResultTable OBJECT-TYPE SYNTAX SEQUENCE OF VctRunResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table of VCT run result." --VCT run result表 ::= { gbnPlatformOAMVctRunResult 1 } vctRunResultEntry OBJECT-TYPE SYNTAX VctRunResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of VCT run result." --VCT run result列表 INDEX { vctRunResultPort, vctRunResultTxRxPairNo } ::= { vctRunResultTable 1 } VctRunResultEntry ::= SEQUENCE { vctRunResultPort Integer32, vctRunResultTxRxPairNo Integer32, vctRunResultStatus Integer32, vctRunResultErrorLocation Integer32 } vctRunResultPort OBJECT-TYPE SYNTAX Integer32 (1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number." --端口号，VCT run result表的索引值之一 ::= { vctRunResultEntry 1 } vctRunResultTxRxPairNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tx rx pair NO." --tx rx pair NO，VCT run result表的索引值之一 ::= { vctRunResultEntry 2 } vctRunResultStatus OBJECT-TYPE SYNTAX Integer32 { Normal(1), Open(2), Short(3), Mismatch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the VCT run result" --VCT run result 状态 ::= { vctRunResultEntry 3 } vctRunResultErrorLocation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The error location of the VCT run result. length(m)" --VCT run result的出错地点,长度(米) ::= { vctRunResultEntry 4 } ------------------------------------------------------------------------------ -- -- gbnPlatformOAMIpControl - OAM ip control Group -- ------------------------------------------------------------------------------ ipControlTtl OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the ip control ttl" ::= { gbnPlatformOAMIpControl 1 } -- -- END of GBN-COMMON-MIB -- END