NSCRTV-EPON-QOS-MGM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType, AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType FROM NSCRTV-EPONEOC-EPON-MIB qosManagementObjects FROM NSCRTV-EPONEOC-EPON-MIB; -------------------------------------------------------------------------------- -- qosManagementObjects[ Qos管理项](1.3.6.1.4.1.17409.2.3.8) -------------------------------------------------------------------------------- qosGlobalSetTable OBJECT-TYPE SYNTAX SEQUENCE OF QosGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Global QoS parameters." ::= { qosManagementObjects 1 } qosGlobalSetEntry OBJECT-TYPE SYNTAX QosGlobalSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { qosGlobalSetDeviceIndex } ::= { qosGlobalSetTable 1 } QosGlobalSetEntry ::= SEQUENCE { qosGlobalSetDeviceIndex EponDeviceIndex, qosGlobalSetMaxQueueCount INTEGER, qosGlobalSetMode INTEGER } qosGlobalSetDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT - Set to corresponding device For ONU - Set to 0 " ::= { qosGlobalSetEntry 1 } qosGlobalSetMaxQueueCount OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION " 最大队列数，该设备支持的最大队列数。如果最大队列数为8，则队列编号为0-7。" ::= { qosGlobalSetEntry 2 } qosGlobalSetMode OBJECT-TYPE SYNTAX INTEGER { deviceBased(1), portBased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Define how to set QoS parameter deviceBased(1) - When set, only the table started with deviceBase is applicable portBased(2) - When set, only the table started with portBase is applicable " DEFVAL { deviceBased } ::= { qosGlobalSetEntry 3 } deviceBaseQosMapTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Deviced based setting. It is used to define how to map QoS options to queue" ::= { qosManagementObjects 2 } deviceBaseQosMapEntry OBJECT-TYPE SYNTAX DeviceBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosMapDeviceIndex, deviceBaseQosMapRuleIndex } ::= { deviceBaseQosMapTable 1 } DeviceBaseQosMapEntry ::= SEQUENCE { deviceBaseQosMapDeviceIndex EponDeviceIndex, deviceBaseQosMapRuleIndex INTEGER, deviceBaseQosMapOctet OCTET STRING } deviceBaseQosMapDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT - Set to corresponding device/slot/port For ONU - Set to 0 " ::= { deviceBaseQosMapEntry 1 } deviceBaseQosMapRuleIndex OBJECT-TYPE SYNTAX INTEGER { cos(1), tos(2), diffserv(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " 映射规则编号" ::= { deviceBaseQosMapEntry 2 } deviceBaseQosMapOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8 | 64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 映射值。 长度为8字节，或64字节。每字节表示一个映射关系。 队列编号不能超过对应的qosGlobalSetMaxQueueCount值，如果qosGlobalSetMaxQueueCount为8，则队列编号为0-7。 对于 cos，长度为 8字节，每个字节分别表示cos0-7 映射到的队列编号。 对于 tos，长度为 16字节，每个字节分别表示tos0-15 映射到的队列编号。 对于 diffserv，长度为64字节，每个字节分别表示diffserv0-63映射到的队列编号。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) 则映射关系为： cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 " ::= { deviceBaseQosMapEntry 3 } deviceBaseQosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF DeviceBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Deviced based setting It is used to define QoS specification" ::= { qosManagementObjects 3 } deviceBaseQosPolicyEntry OBJECT-TYPE SYNTAX DeviceBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosPolicyDeviceIndex } ::= { deviceBaseQosPolicyTable 1 } DeviceBaseQosPolicyEntry ::= SEQUENCE { deviceBaseQosPolicyDeviceIndex EponDeviceIndex, deviceBaseQosPolicyMode INTEGER, deviceBaseQosPolicyWeightOctet OCTET STRING, deviceBaseQosPolicySpBandwidthRange OCTET STRING } deviceBaseQosPolicyDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT - Set to corresponding device/slot/port For ONU - Set to 0 " ::= { deviceBaseQosPolicyEntry 1 } deviceBaseQosPolicyMode OBJECT-TYPE SYNTAX INTEGER { sp(1), wrr(2), spWrr(3), wfp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 调度模式" ::= { deviceBaseQosPolicyEntry 2 } deviceBaseQosPolicyWeightOctet OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " 权重值。 长度等于队列数目，每字节表示一个队列的权重。 对于 sp，读写该节点无意义，读时始终为全0。 对于 wrr，每字节描述一个队列的权重。权重的范围为1-100，全部队列权重之和应等于100。 对于 spWrr，每字节描述一个队列的权重。权重范围为0-100，权重为0表示该队列用sp模式，权重值非0的队列权重之和应等于100。 对于 wfp，读写该节点无意义，读时始终为全0。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 说明：共8个队列 queue 0 权重为 5 queue 1 权重为 5 queue 2 权重为 5 queue 3 权重为 5 queue 4 权重为 10 queue 5 权重为 20 queue 6 权重为 20 queue 7 权重为 30 " ::= { deviceBaseQosPolicyEntry 3 } deviceBaseQosPolicySpBandwidthRange OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps " ::= { deviceBaseQosPolicyEntry 4 } portBaseQosMapTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { qosManagementObjects 4 } portBaseQosMapEntry OBJECT-TYPE SYNTAX PortBaseQosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosMapDeviceIndex, portBaseQosMapCardIndex, portBaseQosMapPortIndex, deviceBaseQosMapRuleIndex } ::= { portBaseQosMapTable 1 } PortBaseQosMapEntry ::= SEQUENCE { portBaseQosMapDeviceIndex EponDeviceIndex, portBaseQosMapCardIndex EponPortIndex, portBaseQosMapPortIndex EponPortIndex, portBaseQosMapRuleIndex INTEGER, portBaseQosMapOctet OCTET STRING } portBaseQosMapDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT, set to corresponding SNI port or PON port For ONU, set to 0 " ::= { portBaseQosMapEntry 1 } portBaseQosMapCardIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT, set to 0 For ONU, set to corresponding slot " ::= { portBaseQosMapEntry 2 } portBaseQosMapPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引 For OLT, set to 0 For ONU, set to corresponding port " ::= { portBaseQosMapEntry 3 } portBaseQosMapRuleIndex OBJECT-TYPE SYNTAX INTEGER { cos(1), tos(2), diffserv(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " 映射规则编号" ::= { portBaseQosMapEntry 4 } portBaseQosMapOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 映射值。 长度为8字节，或64字节。每字节表示一个映射关系。 队列编号不能超过对应的qosGlobalSetMaxQueueCount值，如果qosGlobalSetMaxQueueCount为8，则队列编号为0-7。 对于 cos，长度为 8字节，每个字节分别表示cos0-7 映射到的队列编号。 对于 tos，长度为 16字节，每个字节分别表示tos0-16 映射到的队列编号。 对于 diffserv，长度为64字节，每个字节分别表示diffserv0-64映射到的队列编号。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) 则映射关系为： cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 " ::= { portBaseQosMapEntry 5 } portBaseQosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { qosManagementObjects 5 } portBaseQosPolicyEntry OBJECT-TYPE SYNTAX PortBaseQosPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { deviceBaseQosPolicyDeviceIndex, portBaseQosPolicyCardIndex, portBaseQosPolicyPortIndex } ::= { portBaseQosPolicyTable 1 } PortBaseQosPolicyEntry ::= SEQUENCE { portBaseQosPolicyDeviceIndex EponDeviceIndex, portBaseQosPolicyCardIndex EponPortIndex, portBaseQosPolicyPortIndex EponPortIndex, portBaseQosPolicyMode INTEGER, portBaseQosPolicyWeightOctet OCTET STRING, portBaseQosPolicySpBandwidthRange OCTET STRING } portBaseQosPolicyDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Device index For OLT, set to corresponding SNI port or PON port For ONU, set to 0 " ::= { portBaseQosPolicyEntry 1 } portBaseQosPolicyCardIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 For OLT, set to 0 For ONU, set to corresponding slot " ::= { portBaseQosPolicyEntry 2 } portBaseQosPolicyPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引 For OLT, set to 0 For ONU, set to corresponding port " ::= { portBaseQosPolicyEntry 3 } portBaseQosPolicyMode OBJECT-TYPE SYNTAX INTEGER { sp(1), wrr(2), spWrr(3), wfp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 调度模式 sp 严格优先级 wrr 加权轮循 spWrr sp+wrr混合 wfp 加权公平排队" ::= { portBaseQosPolicyEntry 4 } portBaseQosPolicyWeightOctet OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..256)) MAX-ACCESS read-write STATUS current DESCRIPTION " 权重值 长度等于队列数目，每字节表示一个队列的权重。 对于 sp，读写该节点无意义，读时始终为全0。 对于 wrr，每字节描述一个队列的权重。权重的范围为1-100，全部队列权重之和应等于100。 对于 spWrr，每字节描述一个队列的权重。权重范围为0-100，权重为0表示该队列用sp模式，权重值非0的队列权重之和应等于100。 对于 wfp，读写该节点无意义，读时始终为全0。 举例如下： get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 说明：共8个队列 queue 0 权重为 5 queue 1 权重为 5 queue 2 权重为 5 queue 3 权重为 5 queue 4 权重为 10 queue 5 权重为 20 queue 6 权重为 20 queue 7 权重为 30 " ::= { portBaseQosPolicyEntry 5 } portBaseQosPolicySpBandwidthRange OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps " ::= { portBaseQosPolicyEntry 6 } -- -- END of NSCRTV-EPON-QOS-MGM-MIB -- END