NSCRTV-EPON-VLAN-MGM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType, AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType FROM NSCRTV-EPONEOC-EPON-MIB vlanManagementObjects FROM NSCRTV-EPONEOC-EPON-MIB; -------------------------------------------------------------------------------- -- vlanManagementObjects [VLAN管理项](1.3.6.1.4.1.17409.2.3.7) -------------------------------------------------------------------------------- vlanGlobalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanGlobalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 全局VLAN信息表" ::= { vlanManagementObjects 1 } vlanGlobalInfoEntry OBJECT-TYPE SYNTAX VlanGlobalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { vlanDeviceIndex } ::= { vlanGlobalInfoTable 1 } VlanGlobalInfoEntry ::= SEQUENCE { vlanDeviceIndex INTEGER, maxVlanId INTEGER, maxSupportVlans INTEGER, createdVlanNumber INTEGER } vlanDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 For OLT, set to corresponding device ID For ONU, set to 0" ::= { vlanGlobalInfoEntry 1 } maxVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 最大VLAN ID" ::= { vlanGlobalInfoEntry 2 } maxSupportVlans OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 最大支持的VLAN个数" ::= { vlanGlobalInfoEntry 3 } createdVlanNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 已创建的VLAN个数" ::= { vlanGlobalInfoEntry 4 } vlanConfigGroup OBJECT-IDENTITY STATUS current DESCRIPTION " Vlan配置组" ::= { vlanManagementObjects 2 } oltVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OltVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT VLAN成员配置表" ::= { vlanConfigGroup 1 } oltVlanConfigEntry OBJECT-TYPE SYNTAX OltVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { oltVlanIndex, oltVlanDeviceIndex} ::= { oltVlanConfigTable 1 } OltVlanConfigEntry ::= SEQUENCE { oltVlanIndex INTEGER, oltVlanDeviceIndex INTEGER, oltVlanName OCTET STRING, taggedPort OCTET STRING, untaggedPort OCTET STRING, oltVlanRowStatus RowStatus } oltVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Vlan索引号" ::= { oltVlanConfigEntry 1 } oltVlanDeviceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT设备索引号。 " ::= { oltVlanConfigEntry 2 } oltVlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " OLT VLAN name" ::= { oltVlanConfigEntry 3 } taggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的tag的PON/SNI in OLT。 It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 " ::= { oltVlanConfigEntry 4 } untaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的Untag的PON/SNI in OLT。 It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 " ::= { oltVlanConfigEntry 5 } oltVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { oltVlanConfigEntry 6 } onuVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF OnuVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ONU VLAN成员配置表 It is maintained by ONU itself. " ::= { vlanConfigGroup 2 } onuVlanConfigEntry OBJECT-TYPE SYNTAX OnuVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { onuVlanIndex } ::= { onuVlanConfigTable 1 } OnuVlanConfigEntry ::= SEQUENCE { onuVlanIndex INTEGER, onuVlanName OCTET STRING, onuVlanTaggedPort OCTET STRING, onuVlanUntaggedPort OCTET STRING, onuVlanRowStatus RowStatus } onuVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " Vlan索引号" ::= { onuVlanConfigEntry 1 } onuVlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " ONU VLAN name" ::= { onuVlanConfigEntry 2 } onuVlanTaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的tag的UNI端口。 It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of tagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the tagged member ports of the VLAN, then the object is presented as: 01 02 03 04 " ::= { onuVlanConfigEntry 3 } onuVlanUntaggedPort OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Vlan包括的Untag的UNI端口。 It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of untagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to FF, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the untagged member ports of the VLAN, then the object is presented as: 01 02 03 04 " ::= { onuVlanConfigEntry 4 } onuVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { onuVlanConfigEntry 5 } portVlanGroup OBJECT-IDENTITY STATUS current DESCRIPTION " 端口Vlan组（sni、uni、ponport）" ::= { vlanManagementObjects 3 } portVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvlanDeviceIndex shall be set to 0, /OLT SNI pvlanCardIndex, and pvlanPortIndex set to 0 indicates meaningless OLT onu ID - Set pvlanDeviceIndex to corresponding ONU ID, pvlanCardIndex, and pvlanPortIndex set to 0 indicates meaningless ONU UNI - Set pvlanDeviceIndex to corresponding ONU ID, pvlanCardIndex, and pvlanPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvlanDeviceIndex shall be set to 0 to indicate meaningless. pvlanCardIndex shall be set to corresponding slot. pvlanPortIndex shall be set to corresponding port. " ::= { portVlanGroup 1 } portVlanEntry OBJECT-TYPE SYNTAX PortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvlanDeviceIndex, pvlanCardIndex, pvlanPortIndex} ::= { portVlanTable 1 } PortVlanEntry ::= SEQUENCE { pvlanDeviceIndex EponDeviceIndex, pvlanCardIndex EponCardIndex, pvlanPortIndex EponPortIndex, vlanTagTpid OCTET STRING, vlanTagCfi TruthValue, vlanTagPriority INTEGER, vlanPVid INTEGER, vlanMode INTEGER } pvlanDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { portVlanEntry 1 } pvlanCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号 " ::= { portVlanEntry 2 } pvlanPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口/uni/sni端口索引号 " ::= { portVlanEntry 3 } vlanTagTpid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-write STATUS current DESCRIPTION " 标记的协议标识 It shall be presented in hexadecimal format. For example, 81 00 to indicate 0x8100" ::= { portVlanEntry 4 } vlanTagCfi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " 规则格式指示符" ::= { portVlanEntry 5 } vlanTagPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " vlan优先级" ::= { portVlanEntry 6 } vlanPVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " port Vlan ID" ::= { portVlanEntry 7 } vlanMode OBJECT-TYPE SYNTAX INTEGER { transparent(0), tag(1), translation(2), aggregation(3), trunk(4), stacking(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " vlan模式 " ::= { portVlanEntry 8 } portVlanTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan翻译表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. " ::= { portVlanGroup 2 } portVlanTranslationEntry OBJECT-TYPE SYNTAX PortVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvtDeviceIndex , pvtCardIndex , pvtPortIndex , portVidIndex } ::= { portVlanTranslationTable 1 } PortVlanTranslationEntry ::= SEQUENCE { pvtDeviceIndex EponDeviceIndex, pvtCardIndex EponCardIndex, pvtPortIndex EponPortIndex, portVidIndex Unsigned32, translationNewVid Unsigned32, translationRowStatus RowStatus } pvtDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { portVlanTranslationEntry 1 } pvtCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanTranslationEntry 2 } pvtPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口/ONU/uni端口索引号/sni端口" ::= { portVlanTranslationEntry 3 } portVidIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口原始VLAN ID索引号" ::= { portVlanTranslationEntry 4 } translationNewVid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION " 翻译的新vlan号" ::= { portVlanTranslationEntry 5 } translationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态 " ::= { portVlanTranslationEntry 6 } portVlanAggregationManagement OBJECT-IDENTITY STATUS current DESCRIPTION " 端口Vlan聚合管理（VLAN Aggregation）" ::= { portVlanGroup 3 } portVlanAggregationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanAggregationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan聚合配置表 This table applies on OLT pon port, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvaDeviceIndex shall be set to 0, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless OLT onu ID - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless ONU UNI - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvaDeviceIndex shall be set to 0 to indicate meaningless. pvaCardIndex shall be set to corresponding slot. pvaPortIndex shall be set to corresponding port. " ::= { portVlanAggregationManagement 1 } portVlanAggregationConfigEntry OBJECT-TYPE SYNTAX PortVlanAggregationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pvaDeviceIndex , pvaCardIndex , pvaPortIndex , portAggregationVidIndex } ::= { portVlanAggregationConfigTable 1 } PortVlanAggregationConfigEntry ::= SEQUENCE { pvaDeviceIndex EponDeviceIndex, pvaCardIndex EponCardIndex, pvaPortIndex EponPortIndex, portAggregationVidIndex Unsigned32, aggregationVidList OCTET STRING, aggregationRowStatus RowStatus } pvaDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " OLT/ONU设备索引号。" ::= { portVlanAggregationConfigEntry 1 } pvaCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanAggregationConfigEntry 2 } pvaPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " pon端口/uni端口索引号/ONU ID" ::= { portVlanAggregationConfigEntry 3 } portAggregationVidIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口VLAN聚合组VLAN号" ::= { portVlanAggregationConfigEntry 4 } aggregationVidList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (512)) MAX-ACCESS read-create STATUS current DESCRIPTION " 聚合的vlan ID组 采用类似INTERNET比特顺序，从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0，bit1，...，bit7。 按照bit和OCTET由小到大的顺序，每个bit对应于一个VLAN，VLAN ID范围为0..4095。 第一个bit对应VLAN 0,最后一个bit对应VLAN 4095。 如果bit置位，表示该包括该VLAN，否则不包括。" ::= { portVlanAggregationConfigEntry 5 } aggregationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { portVlanAggregationConfigEntry 6 } portVlanTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口Vlan trunk表（VLAN Trunk表? This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. " ::= { portVlanGroup 4 } portVlanTrunkEntry OBJECT-TYPE SYNTAX PortVlanTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { trunkDeviceIndex, trunkCardIndex, trunkPortIndex } ::= { portVlanTrunkTable 1 } PortVlanTrunkEntry ::= SEQUENCE { trunkDeviceIndex EponDeviceIndex, trunkCardIndex EponCardIndex, trunkPortIndex EponPortIndex, trunkVidList OCTET STRING, portVlanTrunkRowStatus RowStatus } trunkDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 设备索引号。 " ::= { portVlanTrunkEntry 1 } trunkCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portVlanTrunkEntry 2 } trunkPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portVlanTrunkEntry 3 } trunkVidList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (512)) MAX-ACCESS read-create STATUS current DESCRIPTION " Trunked Vlan List for the port 采用类似INTERNET比特顺序，从左到右的OCTET分别为OCTET 0, OCTET 1, ... 每个OCTET的bit从左到右分别为bit0，bit1，...，bit7。 按照bit和OCTET由小到大的顺序，每个bit对应于一个VLAN，VLAN ID范围为0..4095。 第一个bit对应VLAN 0,最后一个bit对应VLAN 4095。 如果bit置位，表示该包括该VLAN，否则不包括。 " ::= { portVlanTrunkEntry 4 } portVlanTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " 行状态" ::= { portVlanTrunkEntry 5 } qinQConfigGroup OBJECT-IDENTITY STATUS current DESCRIPTION " QinQ配置组 备注：要求OLT/ONU均支持QINQ，OLT可选，ONU必选" ::= { vlanManagementObjects 4 } portQinQConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PortQinQConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " QinQ配置属性表 This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pqDeviceIndex shall be set to 0, /OLT SNI pqCardIndex, and pqPortIndex set to 0 indicates meaningless OLT onu ID - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to 0 indicates meaningless ONU UNI - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pqDeviceIndex shall be set to 0 to indicate meaningless. pqCardIndex shall be set to corresponding slot. pqPortIndex shall be set to corresponding port. " ::= { qinQConfigGroup 1 } portQinQConfigEntry OBJECT-TYPE SYNTAX PortQinQConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { pqDeviceIndex, pqCardIndex, pqPortIndex, pqStartVlanId, pqEndVlanId } ::= { portQinQConfigTable 1 } PortQinQConfigEntry ::= SEQUENCE { pqDeviceIndex EponDeviceIndex, pqCardIndex EponCardIndex, pqPortIndex EponPortIndex, pqStartVlanId INTEGER, pqEndVlanId INTEGER, pqSVlanId INTEGER, pqSTagCosDetermine INTEGER, pqSTagCosNewValue INTEGER, pqRowStatus RowStatus } pqDeviceIndex OBJECT-TYPE SYNTAX EponDeviceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " ONU ID, for a specific ONU" ::= { portQinQConfigEntry 1 } pqCardIndex OBJECT-TYPE SYNTAX EponCardIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 板卡索引号" ::= { portQinQConfigEntry 2 } pqPortIndex OBJECT-TYPE SYNTAX EponPortIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " 端口索引号" ::= { portQinQConfigEntry 3 } pqStartVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " The starting VLAN ID, working together with pqEndVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed with specified outer VLAN " ::= { portQinQConfigEntry 4 } pqEndVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION " The ending VLAN ID, working together with pqStartVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed with specified outer VLAN " ::= { portQinQConfigEntry 5 } pqSVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " The outer VLAN id to be QinQed" ::= { portQinQConfigEntry 6 } pqSTagCosDetermine OBJECT-TYPE SYNTAX INTEGER { redefine(1), copyFromCTag(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " What STAG COS will be set for this QinQ instance. It could be either a new definition or copied from CTAG " ::= { portQinQConfigEntry 7 } pqSTagCosNewValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION " The new STAG COS value if pqSTagCosDetermine is selected as redefine(1) " DEFVAL { 0 } ::= { portQinQConfigEntry 8 } pqRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " " ::= { portQinQConfigEntry 9 } -- -- END of NSCRTV-EPON-VLAN-MGM-MIB -- END