-- Imports declare SWITCH DEFINITIONS ::= BEGIN IMPORTS SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB TimeTicks, Counter32, OBJECT-IDENTITY, mib-2, MODULE-IDENTITY, IpAddress, Counter64, Unsigned32, Integer32, Gauge32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI OwnerString FROM RMON-MIB NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddressPrefixLength, InetAddress, InetAddressType FROM INET-ADDRESS-MIB InterfaceIndex, InterfaceIndexOrZero, ifIndex FROM IF-MIB VrId FROM VRRP-MIB TestAndIncr, TimeStamp, AutonomousType, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue, DateAndTime, MacAddress, RowStatus FROM SNMPv2-TC enterprises FROM SNMPv2-SMI; -- Child OID declare switch MODULE-IDENTITY LAST-UPDATED "201006260000Z" -- June 26, 2008 at 00:00 GMT ORGANIZATION "" CONTACT-INFO " " DESCRIPTION "The System Information of the switch" ::= { enterprises 27975 } ------------------------------------------------------------------ -- Switch Identifiers -- ------------------------------------------------------------------ system OBJECT IDENTIFIER ::= { switch 1 } syslog OBJECT IDENTIFIER ::= { switch 2 } mirror OBJECT IDENTIFIER ::= { switch 3 } portSecurity OBJECT IDENTIFIER ::= { switch 4 } stormControl OBJECT IDENTIFIER ::= { switch 5 } ntp OBJECT IDENTIFIER ::= { switch 6 } acl OBJECT IDENTIFIER ::= { switch 7 } qos OBJECT IDENTIFIER ::= { switch 8 } igsp OBJECT IDENTIFIER ::= { switch 9 } linkAgg OBJECT IDENTIFIER ::= { switch 10 } qBridgeExt OBJECT IDENTIFIER ::= { switch 11 } dot1xExt OBJECT IDENTIFIER ::= { switch 12 } timeRange OBJECT IDENTIFIER ::= { switch 13 } stpExt OBJECT IDENTIFIER ::= { switch 14 } igmpExt OBJECT IDENTIFIER ::= { switch 16 } boardHealthyMonitor OBJECT IDENTIFIER ::= { switch 17 } arpInsp OBJECT IDENTIFIER ::= { switch 20 } pimsmExt OBJECT IDENTIFIER ::= { switch 21 } ospfExt OBJECT IDENTIFIER ::= { switch 22 } user OBJECT IDENTIFIER ::= { switch 30 } snmpExt OBJECT IDENTIFIER ::= { switch 32 } stm OBJECT IDENTIFIER ::= { switch 33 } dnsClient OBJECT IDENTIFIER ::= { switch 34 } ssh OBJECT IDENTIFIER ::= { switch 35 } dhcp OBJECT IDENTIFIER ::= { switch 36 } lswdevMMib OBJECT IDENTIFIER ::= { switch 37 } lswTrapMib OBJECT IDENTIFIER ::= { switch 39 } ipSourceGuard OBJECT IDENTIFIER ::= { switch 40 } vrrpExt OBJECT IDENTIFIER ::= { switch 41 } interface OBJECT IDENTIFIER ::= { switch 42 } management OBJECT IDENTIFIER ::= { switch 43 } mvr OBJECT IDENTIFIER ::= { switch 44 } erps OBJECT IDENTIFIER ::= { switch 45 } prefixList OBJECT IDENTIFIER ::= { switch 46 } ipUnicast OBJECT IDENTIFIER ::= { switch 47 } vrf OBJECT IDENTIFIER ::= { switch 48 } aaa OBJECT IDENTIFIER ::= { switch 49 } evc OBJECT IDENTIFIER ::= { switch 51 } qinq OBJECT IDENTIFIER ::= { switch 52 } rmonExt OBJECT IDENTIFIER ::= { switch 53 } routeMap OBJECT IDENTIFIER ::= { switch 54 } ripExt OBJECT IDENTIFIER ::= { switch 57 } ldpExt OBJECT IDENTIFIER ::= { switch 60 } bgp OBJECT IDENTIFIER ::= { switch 68 } mpls OBJECT IDENTIFIER ::= { switch 69 } smartlink OBJECT IDENTIFIER ::= { switch 70 } flowctrl OBJECT IDENTIFIER ::= { switch 71 } cputraffic OBJECT IDENTIFIER ::= { switch 72 } portisolate OBJECT IDENTIFIER ::= { switch 73 } phyloopback OBJECT IDENTIFIER ::= { switch 74 } monitorlink OBJECT IDENTIFIER ::= { switch 75 } udld OBJECT IDENTIFIER ::= { switch 76 } policyBasedRouting OBJECT IDENTIFIER ::= { switch 77 } ddos OBJECT IDENTIFIER ::= { switch 78 } l2ping OBJECT IDENTIFIER ::= { switch 79 } ipg OBJECT IDENTIFIER ::= { switch 80 } syncE OBJECT IDENTIFIER ::= { switch 81 } arpConfig OBJECT IDENTIFIER ::= { switch 82 } cfm OBJECT IDENTIFIER ::= { switch 83 } efm OBJECT IDENTIFIER ::= { switch 84 } ptp OBJECT IDENTIFIER ::= { switch 85 } pm OBJECT IDENTIFIER ::= { switch 90 } alarm OBJECT IDENTIFIER ::= { switch 91 } rsvpTe OBJECT IDENTIFIER ::= { switch 92 } g8031 OBJECT IDENTIFIER ::= { switch 93 } g8032 OBJECT IDENTIFIER ::= { switch 94 } voiceVlan OBJECT IDENTIFIER ::= { switch 95 } ivi OBJECT IDENTIFIER ::= { switch 96 } product OBJECT IDENTIFIER ::= { switch 99 } l2protocol OBJECT IDENTIFIER ::= { switch 100 } loopbackDetect OBJECT IDENTIFIER ::= { switch 105 } ipsla OBJECT IDENTIFIER ::= { switch 106 } e3008TS OBJECT-IDENTITY STATUS current DESCRIPTION "E300,8TS." ::= { product 3080 } e30016TX OBJECT-IDENTITY STATUS current DESCRIPTION "E300,16TX." ::= { product 3160 } e3508T12X OBJECT-IDENTITY STATUS current DESCRIPTION "E350,8T12X." ::= { product 3200 } e30024TS OBJECT-IDENTITY STATUS current DESCRIPTION "E300,24TS." ::= { product 3240 } e30024ST OBJECT-IDENTITY STATUS current DESCRIPTION "E300,24ST." ::= { product 3241 } e30048TS OBJECT-IDENTITY STATUS current DESCRIPTION "E300,48TS." ::= { product 3480 } b30048T OBJECT-IDENTITY STATUS current DESCRIPTION "B300,48T." ::= { product 3481 } e33048T OBJECT-IDENTITY STATUS current DESCRIPTION "E330,48T." ::= { product 3485 } e33048SE OBJECT-IDENTITY STATUS current DESCRIPTION "E330,48SE." ::= { product 3486 } e33048S OBJECT-IDENTITY STATUS current DESCRIPTION "E330,48S." ::= { product 3487 } g24eu OBJECT-IDENTITY STATUS current DESCRIPTION "G24EU,24+4." ::= { product 3488 } e35048T4X OBJECT-IDENTITY STATUS current DESCRIPTION "E350,48T4X." ::= { product 3520 } e58024Q OBJECT-IDENTITY STATUS current DESCRIPTION "E580,24Q." ::= { product 5801 } e58048X2Q4Z OBJECT-IDENTITY STATUS current DESCRIPTION "E580,48X2Q4Z." ::= { product 5802 } e58048X6Q OBJECT-IDENTITY STATUS current DESCRIPTION "E580,48X6Q." ::= { product 5803 } e58032X2Q OBJECT-IDENTITY STATUS current DESCRIPTION "E580,32X2Q." ::= { product 5804 } e58032X OBJECT-IDENTITY STATUS current DESCRIPTION "E580,32X." ::= { product 5805 } e58020Q4Z OBJECT-IDENTITY STATUS current DESCRIPTION "E580,20Q4Z." ::= { product 5806 } e602 OBJECT-IDENTITY STATUS current DESCRIPTION "E600,2 slots." ::= { product 6020 } e606 OBJECT-IDENTITY STATUS current DESCRIPTION "E600,6 slots." ::= { product 6060 } e614 OBJECT-IDENTITY STATUS current DESCRIPTION "E600,14 slots." ::= { product 6140 } e802 OBJECT-IDENTITY STATUS current DESCRIPTION "E800,2 slots" ::= { product 8020 } e806 OBJECT-IDENTITY STATUS current DESCRIPTION "E800,6 slots" ::= { product 8060 } e814 OBJECT-IDENTITY STATUS current DESCRIPTION "E800,14 slots" ::= { product 8140 } memory OBJECT IDENTIFIER ::= { system 1 } systemStats OBJECT IDENTIFIER ::= { system 2 } operate OBJECT IDENTIFIER ::= { system 3 } --sysImageTable OBJECT IDENTIFIER ::= { system 4 } sysImageTable OBJECT-TYPE SYNTAX SEQUENCE OF SysImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system image management table." ::= { system 4 } flash OBJECT IDENTIFIER ::= { system 5 } cf OBJECT IDENTIFIER ::= { system 6 } sysTrap OBJECT IDENTIFIER ::= { system 7 } time OBJECT IDENTIFIER ::= { system 8 } -- Sub Module: SYSTEM ErrorFlag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a possible error condition." SYNTAX INTEGER { noError(0), error(1) } memIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index. This should always return the integer 0." ::= { memory 1 } memTotalReal OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real/physical memory installed on this host." ::= { memory 5 } memTotalFree OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of memory free or available for use on this host.This value typically covers both real memory and swap space or virtual memory." ::= { memory 11 } memTotalUsed OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of memory used on this host. This value typically covers both real memory and swap space or virtual memory." ::= { memory 12 } -- systemStats OBJECT IDENTIFIER ::= { system 2 } ssIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index.This should always return the integer 1." ::= { systemStats 1 } ssCpuIdle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of processor time spent idle, calculated over the last minute." ::= { systemStats 11 } -- The agent only implements those of the following counters that the -- kernel supports! Don't expect all to be present. -- sysProcessTable OBJECT IDENTIFIER ::= { systemStats 100 } sysProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF SysProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system precess table." ::= { systemStats 100 } sysProcessEntry OBJECT-TYPE SYNTAX SysProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entity process entry. Each entry consists of information of an process. The sysProcessIndex exclusively defines an process id." INDEX { sysProcessIndex } ::= { sysProcessTable 1 } SysProcessEntry ::= SEQUENCE { sysProcessIndex Integer32, sysProcessName OCTET STRING } sysProcessIndex OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pid of process." ::= { sysProcessEntry 1 } sysProcessName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the process." ::= { sysProcessEntry 2 } -- operate OBJECT IDENTIFIER ::= { system 3 } configSave OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "This should always write running-config to startup-config.And the valid set value is 1. When get the configSave value, 1 means success, 0 means failure." ::= { operate 1 } reload OBJECT-TYPE SYNTAX INTEGER { rebootWithoutSave(1), saveAndReboot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This should allow to reboot the switch.The valid input value is 1 and 2. Value 1 means the switch will reboot without savingcurrent configuration. Value 2 means the switch will savecurrent configuration before reboot the switch." ::= { operate 2 } rebootAt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify auto reboot parameters at the special time. 0 is mean clear." ::= { operate 3 } rebootDelay OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify auto reboot parameters reboot after delay some time. The value is [1, 720] minutes. 0 is mean clear." ::= { operate 4 } version OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description the current version " ::= { operate 5 } serviceTelnet OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Telnet service.1:enable 2:disable." ::= { operate 6 } loginFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This node only for login fail for three time." ::= { operate 7 } lastCommand OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Save the last command line and time." ::= { operate 8 } currentRunningImage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Show the current running image." ::= { operate 9 } sysStartUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Show system startup time." ::= { operate 10 } --sysImageTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SysImageEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The system image management table." -- ::= { system 4 } sysImageEntry OBJECT-TYPE SYNTAX SysImageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entity image entry.Each entry consists of information of an entity image. The sysImageIndex exclusively defines an image file." INDEX { sysImageIndex } ::= { sysImageTable 1 } SysImageEntry ::= SEQUENCE { sysImageIndex Integer32, sysImageName OCTET STRING, sysImageCreateTime OCTET STRING, sysImageVersion OCTET STRING, sysImageSize OCTET STRING, sysImageDir OCTET STRING, sysImageIsBoot TruthValue } sysImageIndex OBJECT-TYPE SYNTAX Integer32 (0..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of image." ::= { sysImageEntry 1 } sysImageName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The file name of the image." ::= { sysImageEntry 2 } sysImageCreateTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The create time of the image." ::= { sysImageEntry 3 } sysImageVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the image." ::= { sysImageEntry 4 } sysImageSize OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the image." ::= { sysImageEntry 5 } sysImageDir OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The dir of the image." ::= { sysImageEntry 6 } sysImageIsBoot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This image is the boot image (1),and is not the boot image (2). Only support enable(1)." ::= { sysImageEntry 7 } -- -- System Traps -- --time OBJECT IDENTIFIER ::= { system 8 } timeSet OBJECT IDENTIFIER ::= { time 1 } timeSetClock OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "current time. format HH:MM:SS." ::= { timeSet 1 } timeSetMonth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Month of the year. range is [1, 12]." ::= { timeSet 2 } timeSetDay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Day of the month. range is [1, 31]." ::= { timeSet 3 } timeSetYear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Year of the date. range is [2000, 2037]." ::= { timeSet 4 } timezoneSetTable OBJECT-TYPE SYNTAX SEQUENCE OF TimezoneSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SummerTime." ::= { time 2 } timezoneSetEntry OBJECT-TYPE SYNTAX TimezoneSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of timezone." INDEX { timezoneSetZoneName } ::= { timezoneSetTable 1 } TimezoneSetEntry ::= SEQUENCE { timezoneSetZoneName OCTET STRING, timezoneSetType Integer32, timezoneSetHours Integer32, timezoneSetMinutes Integer32, timezoneSetSeconds Integer32, timezoneSetState RowStatus } timezoneSetZoneName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Zone name, must be less than 32 characters. only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [3, 32)" ::= { timezoneSetEntry 1 } timezoneSetType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Positive/Negative time zone offset from UTC. 0 means Negative 1 means Positive" ::= { timezoneSetEntry 2 } timezoneSetHours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Hours offset from UTC, must be range 0~23." ::= { timezoneSetEntry 3 } timezoneSetMinutes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Minutes offset from UTC, must be range 0~59." ::= { timezoneSetEntry 4 } timezoneSetSeconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Seconds offset from UTC, must be range 0~59." ::= { timezoneSetEntry 5 } timezoneSetState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { timezoneSetEntry 6 } recurrentSummerTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF RecurrentSummerTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SummerTime." ::= { time 3 } recurrentSummerTimeEntry OBJECT-TYPE SYNTAX RecurrentSummerTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of SummerTime." INDEX { recurrentSummerTimeZoneName } ::= { recurrentSummerTimeTable 1 } RecurrentSummerTimeEntry ::= SEQUENCE { recurrentSummerTimeZoneName OCTET STRING, recurrentSummerTimeStartMonth Integer32, recurrentSummerTimeStartDay Integer32, recurrentSummerTimeStartClock OCTET STRING, recurrentSummerTimeEndMonth Integer32, recurrentSummerTimeEndDay Integer32, recurrentSummerTimeEndClock OCTET STRING, recurrentSummerTimeOffset Integer32, recurrentSummerTimeState RowStatus } recurrentSummerTimeZoneName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Zone name, must be less than 32 characters. only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [1, 32)" ::= { recurrentSummerTimeEntry 1 } recurrentSummerTimeStartMonth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Start month of the year. range is [1,12]" ::= { recurrentSummerTimeEntry 2 } recurrentSummerTimeStartDay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Day in month to start. range is [1, 31]. " ::= { recurrentSummerTimeEntry 3 } recurrentSummerTimeStartClock OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Time to start. format HH:MM:SS" ::= { recurrentSummerTimeEntry 4 } recurrentSummerTimeEndMonth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Month to end. range is [1, 12]." ::= { recurrentSummerTimeEntry 5 } recurrentSummerTimeEndDay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Day in month to end. range is [1, 31]." ::= { recurrentSummerTimeEntry 6 } recurrentSummerTimeEndClock OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Time to end. format HH:MM:SS" ::= { recurrentSummerTimeEntry 7 } recurrentSummerTimeOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Summer time offset, unit is minute. range is [1, 1440]." ::= { recurrentSummerTimeEntry 8 } recurrentSummerTimeState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { recurrentSummerTimeEntry 9 } summerTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SummerTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SummerTime." ::= { time 4 } summerTimeEntry OBJECT-TYPE SYNTAX SummerTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of SummerTime." INDEX { summerTimeZoneName } ::= { summerTimeTable 1 } SummerTimeEntry ::= SEQUENCE { summerTimeZoneName OCTET STRING, summerTimeStartMonth Integer32, summerTimeStartDay Integer32, summerTimeStartYear Integer32, summerTimeStartClock OCTET STRING, summerTimeEndMonth Integer32, summerTimeEndDay Integer32, summerTimeEndYear Integer32, summerTimeEndClock OCTET STRING, summerTimeOffset Integer32, summerTimeState RowStatus } summerTimeZoneName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Zone name, must be less than 32 characters. only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [1, 32)" ::= { summerTimeEntry 1 } summerTimeStartMonth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Start month of the year. range is [1, 12]." ::= { summerTimeEntry 2 } summerTimeStartDay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Start day of month. range is [1, 31]." ::= { summerTimeEntry 3 } summerTimeStartYear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Start year of summer-time. range is [2000, 2037]." ::= { summerTimeEntry 4 } summerTimeStartClock OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Start time. format HH:MM:SS." ::= { summerTimeEntry 5 } summerTimeEndMonth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "End month of year. range is [1, 12]." ::= { summerTimeEntry 6 } summerTimeEndDay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "End day of month. range is [1, 31]." ::= { summerTimeEntry 7 } summerTimeEndYear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "End year of summer time. range is [2000, 2037]." ::= { summerTimeEntry 8 } summerTimeEndClock OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "End time. format HH:MM:SS." ::= { summerTimeEntry 9 } summerTimeOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Summer time offset, unit is minute. range is [1, 1440]." ::= { summerTimeEntry 10 } summerTimeState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { summerTimeEntry 11 } cpuUsage OBJECT IDENTIFIER ::= { system 9 } fiveSeconds OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage within five seconds." ::= { cpuUsage 1 } oneMinute OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage within one minute." ::= { cpuUsage 2 } fiveMinutes OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage within five minutes." ::= { cpuUsage 3 } -- Sub Module: FLASH -- -- Textual conventions -- FlashOperationStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the specified operation can be one of the following. opInProgress : the operation is in process. opSuccess : the operation has been completed successfully. opInvalid : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol :invalid protocol is specified opInvalidSourceName :invalid source file name is specified. opInvalidDestName :invalid target name is specified. opInvalidServerAddress :invalid server address is specified opDeviceBusy :the device is in use and locked by another process opDeviceOpenError :invalid device name is specified. opDeviceError : device read, write or erase error opDeviceNotProgrammable :device isread-only but a write or erase operation was specified. opDeviceFull : device is filled to capacity opFileOpenError :invalid file name; file not found in partition opFileTransferError :file transfer was unsuccessful opFileChecksumError :file checksum in Flash is invalid opNoMemory :system is running in low on memory opUnknownFailure :failure which is unknown opDeleteFileOpenError :file is in used by another process opDeleteInvalidDevice :invalid device name is specified opDeleteInvalidFunction :deleted operation is unsupported by the device. opDeleteOperationError :operation is in a low error opDeleteInvalidFileName :invalid file name is specified pDeleteDeviceBusy :the device is in use and locked by another process. opDeleteParaError :the parameters are invalid opDeleteInvalidPath :the file path is invalid." SYNTAX INTEGER { opInProgress(1), opSuccess(2), opInvalid(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeout(18), opUnknownFailure(19), opDeleteFileOpenError(20), opDeleteInvalidDevice(21), opDeleteInvalidFunction(22), opDeleteOperationError(23), opDeleteInvalidFileName(24), opDeleteDeviceBusy(25), opDeleteParaError(26), opDeleteInvalidPath(27) } -- -- Node definitions -- -- Flash device management MIB object flashManMIBObjects OBJECT IDENTIFIER ::= { flash 1 } -- The flash device information. flashDevice OBJECT IDENTIFIER ::= { flashManMIBObjects 1 } flashTable OBJECT-TYPE SYNTAX SEQUENCE OF FlashEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives the properties of all the flashes on the system." ::= { flashDevice 1 } flashEntry OBJECT-TYPE SYNTAX FlashEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of flashTable." INDEX { flhIndex } ::= { flashTable 1 } FlashEntry ::= SEQUENCE { flhIndex Integer32, flhSize OCTET STRING, flhFree OCTET STRING, flhName OCTET STRING, -- flhChipNum -- Integer32, flhDescr OCTET STRING -- flhInitTime -- TimeStamp -- flhRemovable -- TruthValue, -- flhPartitionBool -- TruthValue, -- flhMinPartitionSize -- Integer32, -- flhMaxPartitions -- Integer32, -- flhPartitionNum -- Integer32 } flhIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of flashTable.It has a minimum value of 1, and maximum value of the same as the value of flhSupportNum." ::= { flashEntry 1 } flhSize OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total size of the flash device indexed by flhIndex. The value should be zero if the flash is removed for a removable device." ::= { flashEntry 2 } flhFree OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the free size of the flash device." ::= { flashEntry 3 } flhName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The flash name within the system." ::= { flashEntry 4 } --flhChipNum OBJECT-TYPE -- SYNTAX Integer32 (1..64) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The chip numbers in the flash." -- ::= { flashEntry 5 } flhDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "DESCRIPTION of the purpose of the flash in the system." ::= { flashEntry 6 } --flhInitTime OBJECT-TYPE -- SYNTAX TimeStamp -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- The initialization time for the flash component or partition, -- recorded using the system time.This will be the boot time for -- a fixed device.For a removable component or a partition, -- it will be the initialization time. -- " -- ::= { flashEntry 8 } --flhRemovable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- The value indicates whether the flash indexed can be removed -- or not. -- The true(1) value indicates the flash device CAN be removed. -- " -- ::= { flashEntry 9 } -- -- --flhPartitionBool OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " -- The value indicates whether the flash indexed can be partitioned -- or not. -- The true(1) value indicates the flash CAN be partitioned. -- " -- ::= { flashEntry 11 } -- -- --flhMinPartitionSize OBJECT-TYPE -- SYNTAX Integer32 -- UNITS "bytes" -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- Minimum partition size supported. -- If flhDevicePartitionBool is false, the value -- of this object is the same as flhSize. -- " -- ::= { flashEntry 12 } -- -- --flhMaxPartitions OBJECT-TYPE -- SYNTAX Integer32 (1..8) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- The maximum count of partitions which the system supports -- for this flash.If flhPartitionBool is false, -- the object value is 1. -- " -- ::= { flashEntry 13 } -- -- --flhPartitionNum OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- The actual number of partitions supported by the system for -- this flash.If flhPartitionBool is false, this value is 1. -- " -- ::= { flashEntry 14 } flhFiles OBJECT IDENTIFIER ::= { flashDevice 2 } flhFileTable OBJECT-TYPE SYNTAX SEQUENCE OF FlhFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of file information." ::= { flhFiles 1 } flhFileEntry OBJECT-TYPE SYNTAX FlhFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing a file.Indexed using flash number, partition number, and file number." INDEX {flhFileIndex } ::= { flhFileTable 1 } FlhFileEntry ::= SEQUENCE { flhFileIndex Integer32, flhFileName OCTET STRING, flhFileSize Integer32, flhFileTime OCTET STRING -- flhFileChecksum -- OCTET STRING } flhFileIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table, whose range is from 1 to 2147483647." ::= { flhFileEntry 1 } flhFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A valid file name supported by the file system." ::= { flhFileEntry 2 } flhFileSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The file size in bytes excluding the file header of file system. The value should be greater than zero." ::= { flhFileEntry 3 } flhFileTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time when this file is modified last time." ::= { flhFileEntry 4 } --flhFileChecksum OBJECT-TYPE -- SYNTAX OCTET STRING -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The file checksum in the header of file." -- ::= { flhFileEntry 5 } -- The operation on the flash. flashOperate OBJECT IDENTIFIER ::= { flashManMIBObjects 2 } flhOpTable OBJECT-TYPE SYNTAX SEQUENCE OF FlhOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used to operate flash." ::= { flashOperate 1 } flhOpEntry OBJECT-TYPE SYNTAX FlhOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Note an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly." INDEX { flhOperIndex } ::= { flhOpTable 1 } FlhOpEntry ::= SEQUENCE { flhOperIndex Integer32, flhOperType INTEGER, flhOperProtocol INTEGER, flhOperServerAddress IpAddress, flhOperServerUser OCTET STRING, flhOperPassword OCTET STRING, flhOperSourceFile OCTET STRING, flhOperDestinationFile OCTET STRING, flhOperStatus FlashOperationStatus , -- flhOperEndNotification -- TruthValue, -- flhOperProgress -- TimeTicks, flhOperIsManagementIf TruthValue, flhOperRowStatus RowStatus } flhOperIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Specifies the index of an entry.It is a random value when creating an entry." ::= { flhOpEntry 1 } flhOperType OBJECT-TYPE SYNTAX INTEGER { flash2Flash(1), net2Flash(2), flash2Net(3), delete(4), rename(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation to be executed. flash2Flash(1) Copy a file from flash to flash. net2Flash(2) Copy a file from net to flash; flash2Net(3) Copy a file from flash to net. delete(4) Delete a file from flash, the file name is specified by flhOperSourceFile; rename(5) Change a file's name." ::= { flhOpEntry 2 } flhOperProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2) -- clusterftp(3), -- clustertftp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the protocol used to transfer file. The default protocol is ftp. Both member switch and commander switch can use them if they support HGMP v2. 1 FTP 2 TFTP" -- DEFVAL { ftp } ::= { flhOpEntry 3 } flhOperServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of remote host acting as server for operation. The default value is 0.0.0.0." -- DEFVAL { 0.0.0.0 } ::= { flhOpEntry 4 } flhOperServerUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "When using ftp to transfer files, the user name must be specified through this node." ::= { flhOpEntry 5 } flhOperPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote user password for copying via ftp protocol.Optionally, This object may be ignored for protocols other than ftp." ::= { flhOpEntry 6 } flhOperSourceFile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified." ::= { flhOpEntry 7 } flhOperDestinationFile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application." ::= { flhOpEntry 8 } flhOperStatus OBJECT-TYPE SYNTAX FlashOperationStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the specified operation can be one of the following. opInProgress(1) : the operation is in process. opSuccess(2) : the operation has been completed successfully. opInvalid(3) : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol(4) :invalid protocol is specified opInvalidSourceName(5) :invalid source file name is specified. opInvalidDestName(6) :invalid target name is specified. opInvalidServerAddress(7) :invalid server address is specified opDeviceBusy(8) :the device is in use and locked by another process opDeviceOpenError(9) :invalid device name is specified. opDeviceError(10) : device read, write or erase error opDeviceNotProgrammable(11) :device isread-only but a write or erase operation was specified. opDeviceFull(12) : device is filled to capacity opFileOpenError(13) :invalid file name; file not found in partition opFileTransferError(14) :file transfer was unsuccessful opFileChecksumError(15) :file checksum in Flash is invalid opNoMemory(16) :system is running in low on memory opUnknownFailure(19) :failure which is unknown opDeleteFileOpenError(20) :file is in used by another process opDeleteInvalidDevice(21) :invalid device name is specified opDeleteInvalidFunction(22) :deleted operation is unsupported by the device. opDeleteOperationError(23) :operation is in a low error opDeleteInvalidFileName(24) :invalid file name is specified pDeleteDeviceBusy(25) :the device is in use and locked by another process. opDeleteParaError(26) :the parameters are invalid opDeleteInvalidPath(27) :the file path is invalid." ::= { flhOpEntry 9 } --flhOperEndNotification OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " -- If the value of it is specified 'true', a notification -- will be generated at the end of the operation. -- Else no notification will be generated. -- " -- DEFVAL { false } -- ::= { flhOpEntry 10 } --flhOperProgress OBJECT-TYPE -- SYNTAX TimeTicks -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The progress described as the time taken for the operation. -- " -- ::= { flhOpEntry 11 } flhOperIsManagementIf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If use management interface running SNMP or not, true(1):enable.false(2):disable" -- DEFVAL { true } ::= { flhOpEntry 12 } flhOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { flhOpEntry 13 } -- flashNotification OBJECT IDENTIFIER ::= { flashManMIBObjects 3 } -- -- -- flhOperNotification NOTIFICATION-TYPE -- OBJECTS { flhOperStatus } -- STATUS current -- DESCRIPTION -- " -- A flhOperNotification is sent at the completion of a flash -- copy operation if flhOperEndNotification is true. -- " -- ::= { flashNotification 1 } -- Sub Module: CF -- -- Textual conventions -- CfOperationStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the specified operation can be one of the following. opInProgress : the operation is in process. opSuccess : the operation has been completed successfully. opInvalid : the command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol :invalid protocol is specified opInvalidSourceName :invalid source file name is specified. opInvalidDestName :invalid target name is specified. opInvalidServerAddress :invalid server address is specified opDeviceBusy :the device is in use and locked by another process opDeviceOpenError :invalid device name is specified. opDeviceError : device read, write or erase error opDeviceNotProgrammable :device isread-only but a write or erase operation was specified opDeviceFull : device is filled to capacity opFileOpenError :invalid file name; file not found in partition opFileTransferError :file transfer was unsuccessful opFileChecksumError :file checksum in Cf is invalid opNoMemory :system is running in low on memory opUnknownFailure :failure which is unknown opDeleteFileOpenError :file is in used by another process opDeleteInvalidDevice :invalid device name is specified opDeleteInvalidFunction :deleted operation is unsupported by the device opDeleteOperationError :operation is in a low error opDeleteInvalidFileName :invalid file name is specified pDeleteDeviceBusy :the device is in use and locked by another process opDeleteParaError :the parameters are invalid opDeleteInvalidPath :the file path is invalid." SYNTAX INTEGER { opInProgress(1), opSuccess(2), opInvalid(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeout(18), opUnknownFailure(19), opDeleteFileOpenError(20), opDeleteInvalidDevice(21), opDeleteInvalidFunction(22), opDeleteOperationError(23), opDeleteInvalidFileName(24), opDeleteDeviceBusy(25), opDeleteParaError(26), opDeleteInvalidPath(27) } -- -- Node definitions -- -- Cf device management MIB object cfManMIBObjects OBJECT IDENTIFIER ::= { cf 1 } -- The cf device information. cfDevice OBJECT IDENTIFIER ::= { cfManMIBObjects 1 } cfTable OBJECT-TYPE SYNTAX SEQUENCE OF CfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives the properties of all the cfes on the system." ::= { cfDevice 1 } cfEntry OBJECT-TYPE SYNTAX CfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of cfTable." INDEX { cfIndex } ::= { cfTable 1 } CfEntry ::= SEQUENCE { cfIndex Integer32, cfSize OCTET STRING, cfFree OCTET STRING, cfName OCTET STRING, -- cfChipNum -- Integer32, cfDescr OCTET STRING -- cfInitTime -- TimeStamp -- cfRemovable -- TruthValue, -- cfPartitionBool -- TruthValue, -- cfMinPartitionSize -- Integer32, -- cfMaxPartitions -- Integer32, -- cfPartitionNum -- Integer32 } cfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of cfTable.It has a minimum value of 1, and maximum value of the same as the value of cfSupportNum." ::= { cfEntry 1 } cfSize OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION " Specifies the total size of the cf device indexed by cfIndex.The value should be zero if the cf is removed for a removable device. " ::= { cfEntry 2 } cfFree OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the free size of the cf device." ::= { cfEntry 3 } cfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The cf name within the system." ::= { cfEntry 4 } --cfChipNum OBJECT-TYPE -- SYNTAX Integer32 (1..64) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The chip numbers in the cf." -- ::= { cfEntry 5 } cfDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the purpose of the cf in the system." ::= { cfEntry 6 } cfFiles OBJECT IDENTIFIER ::= { cfDevice 2 } cfFileTable OBJECT-TYPE SYNTAX SEQUENCE OF CfFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of file information." ::= { cfFiles 1 } cfFileEntry OBJECT-TYPE SYNTAX CfFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry representing a file. Indexed using cf number, partition number, and file number. " INDEX {cfFileIndex } ::= { cfFileTable 1 } CfFileEntry ::= SEQUENCE { cfFileIndex Integer32, cfFileName OCTET STRING, cfFileSize Integer32, cfFileTime OCTET STRING -- cfFileChecksum -- OCTET STRING } cfFileIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table, whose range is from 1 to 2147483647" ::= { cfFileEntry 1 } cfFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A valid file name supported by the file system." ::= { cfFileEntry 2 } cfFileSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The file size in bytes excluding the file header of file system. The value should be greater than zero. " ::= { cfFileEntry 3 } cfFileTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The time when this file is modified last time. " ::= { cfFileEntry 4 } -- The operation on the cf. cfOperate OBJECT IDENTIFIER ::= { cfManMIBObjects 2 } cfOpTable OBJECT-TYPE SYNTAX SEQUENCE OF CfOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used to operate cf." ::= { cfOperate 1 } cfOpEntry OBJECT-TYPE SYNTAX CfOpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Note an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly." INDEX { cfOperIndex } ::= { cfOpTable 1 } CfOpEntry ::= SEQUENCE { cfOperIndex Integer32, cfOperType INTEGER, cfOperProtocol INTEGER, cfOperServerAddress IpAddress, cfOperServerUser OCTET STRING, cfOperPassword OCTET STRING, cfOperSourceFile OCTET STRING , cfOperDestinationFile OCTET STRING, cfOperStatus CfOperationStatus, -- cfOperEndNotification -- TruthValue, -- cfOperProgress -- TimeTicks, cfOperIsManagementIf TruthValue, cfOperRowStatus RowStatus } cfOperIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the index of an entry. It is a random value when creating an entry." ::= { cfOpEntry 1 } cfOperType OBJECT-TYPE SYNTAX INTEGER { cf2Cf(1), net2Cf(2), cf2Net(3), delete(4), rename(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the operation to be executed. net2CfWithErase Copy a file to cf; erase cf beforehand. net2CfWithoutErase Copy a file to cf; do not erase cf beforehand. cf2Net Copy a file from cf. delete Delete a file from cf, the file name is specified by cfOperSourceFile; rename Change a file's name." ::= { cfOpEntry 2 } cfOperProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the protocol used to transfer file.The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the cfOperServerAddress needn't be set the server address can be acquired automatically, the value of cfOperServerAddress is uncertain during operation.Both member switch and commander switch can use them if they support HGMP v2." -- DEFVAL { ftp } ::= { cfOpEntry 3 } cfOperServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of remote host acting as server for operation. The default value is 255.255.255.255." -- DEFVAL { 'FFFFFFFF'h } ::= { cfOpEntry 4 } cfOperServerUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "When using ftp to transfer files, the user name must be specified through this node." ::= { cfOpEntry 5 } cfOperPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote user password for copying via ftp protocol.Optionally. This object may be ignored for protocols other than ftp." ::= { cfOpEntry 6 } cfOperSourceFile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the source file name to be transferred. It may be located on cf or remote server. It may include the file path if it is applicable. It must be specified." ::= { cfOpEntry 7 } cfOperDestinationFile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the destination file name. It may be located on cf or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application." ::= { cfOpEntry 8 } cfOperStatus OBJECT-TYPE SYNTAX CfOperationStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of operation." ::= { cfOpEntry 9 } --cfOperEndNotification OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " -- If the value of it is specified 'true', a notification -- will be generated at the end of the operation. -- Else no notification will be generated. -- " -- DEFVAL { false } -- ::= { cfOpEntry 10 } -- -- --cfOperProgress OBJECT-TYPE -- SYNTAX TimeTicks -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The progress described as the time taken for the operation." -- ::= { cfOpEntry 11 } cfOperIsManagementIf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If use management interface running SNMP or not." -- DEFVAL { true } ::= { cfOpEntry 12 } cfOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfOpEntry 13 } -- Sub Module: SYSLOG -- -- Textual conventions -- MessageLevelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify severity level of message." SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7) } MessageTrapLevelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify severity level of message." SYNTAX INTEGER { high(0), middle(1), lower(2), minor(3) } TimeStampFormatType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify operation types on time stamp of message. none: no time stamp information in message. date: the time stamp type of message is date. boot: the time stamp type of message is the time from uptime of system. dateWithoutYear: the time stamp type of message is date without year information." SYNTAX INTEGER { bsd(0), iso(1), full(2), null(3) } FacilityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify loghost facility which generates messages." SYNTAX INTEGER { kernel(0), userLevel(1), mailSystem(2), systemDaemons(3), securityAuthorization(4), syslog(5), linePrinter(6), networkNews(7), uucp(8), cron(9), securityAuthorization2(10), ftpDaemon(11), ntp(12), logAudit(13), logAlert(14), clockDaemon2(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23) } -- -- -- Node definitions -- syslogTimestamp OBJECT-TYPE SYNTAX TimeStampFormatType MAX-ACCESS read-write STATUS current DESCRIPTION "The log timestamp type. 0 RBSD(RFC3164 or bsd). 1 RISO(RFC3339 or iso). 2 RFULL(date). 3 NONE." ::= { syslog 1 } syslogOperateLogEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of log operate true(1):enable.false(2):disable." ::= { syslog 2 } syslogBuffer OBJECT IDENTIFIER ::= { syslog 3 } syslogBufferMaxSize OBJECT-TYPE SYNTAX INTEGER(10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of messages that can be storedin logbuffer.MaxSize range 10~1000." ::= { syslogBuffer 1 } syslogbufferSeverity OBJECT-TYPE SYNTAX MessageLevelType MAX-ACCESS read-write STATUS current DESCRIPTION "The operations staff can selectively filter the messages with priority which consists of severity that generates the message and severity of the message.Range 0~7. " -- DEFVAL { 7 } ::= { syslogBuffer 2 } syslogBuffercurrentMessages OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of log messages stored in logbuffer." ::= { syslogBuffer 3 } syslogBufferDroppedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of log messages dropped in logbuffer." ::= { syslogBuffer 4 } -- syslogFile OBJECT IDENTIFIER ::= { syslog 4 } syslogFileEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of log merge true(1):enable.false(2):disable." ::= { syslogFile 1 } syslogFileSeverity OBJECT-TYPE SYNTAX MessageLevelType MAX-ACCESS read-write STATUS current DESCRIPTION "The operations staff can selectively filter the messages with priority which consists of severity that generates the message and severity of the message.Range 0~7." ::= { syslogFile 2 } syslogServer OBJECT IDENTIFIER ::= { syslog 5 } syslogServerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of syslogtrap: true(1): enable.false(2): disable." ::= { syslogServer 1 } syslogServerFacility OBJECT-TYPE SYNTAX FacilityType MAX-ACCESS read-write STATUS current DESCRIPTION "The operations staff can selectively filter the messages with priority which consists of facility that generates the message and severity of the message.Value range 0~11 or 16~23." -- DEFVAL { local7 } ::= { syslogServer 2 } syslogServerSeverity OBJECT-TYPE SYNTAX MessageLevelType MAX-ACCESS read-write STATUS current DESCRIPTION "The operations staff can selectively filter the messages with priority which consists of severity that generates the message and severity of the message.Value range 0~7.default 4" ::= { syslogServer 3 } syslogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of loghost." ::= { syslogServer 4 } syslogServerEntry OBJECT-TYPE SYNTAX SyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The loghost entry of syslog." INDEX { syslogServerIpaddress, syslogServerMgmtIf } ::= { syslogServerTable 1 } SyslogServerEntry ::= SEQUENCE { syslogServerIpaddress IpAddress, syslogServerMgmtIf INTEGER, syslogServerRowStatus RowStatus } syslogServerIpaddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ip address of loghost." ::= { syslogServerEntry 1 } syslogServerMgmtIf OBJECT-TYPE SYNTAX INTEGER { noUse(1), useMgmtIf(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mgmt if of loghost. 1 noUse. 2 useMgmtIf." ::= { syslogServerEntry 2 } syslogServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { syslogServerEntry 3 } syslogTrap OBJECT IDENTIFIER ::= { syslog 6 } syslogTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of syslog trap. true(1):enable.false(2):disable." ::= { syslogTrap 1 } syslogTrapSeverity OBJECT-TYPE SYNTAX MessageTrapLevelType MAX-ACCESS read-write STATUS current DESCRIPTION "The operations staff can selectively filter the messages with priority which consists of severity that generates the message and severity of the message. 0 high. 1 middle. 2 lower. 3 minor." ::= { syslogTrap 2 } syslogMerge OBJECT IDENTIFIER ::= { syslog 7 } syslogMergeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of log merge true(1):enable.false(2):disable." ::= { syslogMerge 1 } syslogMergeFifoSize OBJECT-TYPE SYNTAX INTEGER(100..10240) MAX-ACCESS read-write STATUS current DESCRIPTION "The logging merge fifo-size, specify the logging merge buffer." ::= { syslogMerge 2 } syslogMergeTimeout OBJECT-TYPE SYNTAX INTEGER(1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The logging merge timeout value, specify the logging merge interval.default 10." ::= { syslogMerge 3 } syslogSync OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specify sync parameter. true(1): sync the syslog and return value is always 0." ::= { syslog 8 } syslogClearLogBuff OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Clear logging buffer. true(1): clear the logging buffer and return value is always 0." ::= { syslog 9 } -- Sub Module: MIRROR mSSrcIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MSSrcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror session source port entries." ::= { mirror 1 } mSSrcIfEntry OBJECT-TYPE SYNTAX MSSrcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that describe a source port to be added to a mirror session." INDEX { mSSrcIfID, mSSrcIfIndex } ::= { mSSrcIfTable 1 } MSSrcIfEntry ::= SEQUENCE { mSSrcIfID Integer32, mSSrcIfIndex Integer32, mSSrcIfDirection INTEGER, mSSrcIfRowStatus RowStatus } mSSrcIfID OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the mirror session table." ::= { mSSrcIfEntry 1 } mSSrcIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex of mirror group source port. including ethernet port and agg port" ::= { mSSrcIfEntry 2 } mSSrcIfDirection OBJECT-TYPE SYNTAX INTEGER { rx(1), tx(2), both(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror direction of source port.if the direction first configured as rx, then configure tx, then the direction will be both." ::= { mSSrcIfEntry 3 } mSSrcIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mSSrcIfEntry 4 } mSSrcVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF MSSrcVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror session source vlan entries." ::= { mirror 2 } mSSrcVlanEntry OBJECT-TYPE SYNTAX MSSrcVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that describe a source vlan to be added to a mirror session." INDEX { mSSrcVlanID, mSSrcVlanNum } ::= { mSSrcVlanTable 1 } MSSrcVlanEntry ::= SEQUENCE { mSSrcVlanID Integer32, mSSrcVlanNum Integer32, mSSrcVlanDirection INTEGER, mSSrcVlanRowStatus RowStatus } mSSrcVlanID OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the mirror session table." ::= { mSSrcVlanEntry 1 } mSSrcVlanNum OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex of mirror group source vlan." ::= { mSSrcVlanEntry 2 } mSSrcVlanDirection OBJECT-TYPE SYNTAX INTEGER { rx(1), tx(2), both(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Mirror direction of source vlan.if the direction first configured as rx, then configure tx, then the direction will be both." ::= { mSSrcVlanEntry 3 } mSSrcVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mSSrcVlanEntry 4 } mSDestIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MSDestIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror group dest port entries." ::= { mirror 3 } mSDestIfEntry OBJECT-TYPE SYNTAX MSDestIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that describe a dest port to be added to a mirror group." INDEX { mSDestIfID } ::= { mSDestIfTable 1 } MSDestIfEntry ::= SEQUENCE { mSDestIfID Integer32, mSDestIfIndex Integer32, mSSessionType INTEGER, mSDestVlanID Integer32, mSDestIfRowStatus RowStatus } mSDestIfID OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the mirror session table." ::= { mSDestIfEntry 1 } mSDestIfIndex OBJECT-TYPE SYNTAX Integer32 (1..1023) MAX-ACCESS read-create STATUS current DESCRIPTION "IfIndex of mirror group dest port. only ethernet port. " ::= { mSDestIfEntry 2 } mSSessionType OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "session type." ::= { mSDestIfEntry 3 } mSDestVlanID OBJECT-TYPE SYNTAX Integer32 (2..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "IfIndex of mirror group dest vlan." ::= { mSDestIfEntry 4 } mSDestIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mSDestIfEntry 5 } mSTable OBJECT-TYPE SYNTAX SEQUENCE OF MSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror group entries." ::= { mirror 4 } mSEntry OBJECT-TYPE SYNTAX MSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that describe a mirror group." INDEX { mSID } ::= { mSTable 1 } MSEntry ::= SEQUENCE { mSID Integer32, mSType INTEGER, mSStatus INTEGER, mSRowStatus RowStatus } mSID OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the mirror session table." ::= { mSEntry 1 } mSType OBJECT-TYPE SYNTAX INTEGER { local(1) , remote(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of a mirror session. 1 Local. 2 remote." ::= { mSEntry 2 } mSStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a mirror session.A mirror session will be active only when it has destination port. 1 Active. 2 Inactive." ::= { mSEntry 3 } mSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize Destroy and Active." ::= { mSEntry 4 } -- --mSEscapeMacTable -- mSEscapeMacTable OBJECT-TYPE SYNTAX SEQUENCE OF MSEscapeMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of mirror session escape mac entries." ::= { mirror 5 } mSEscapeMacEntry OBJECT-TYPE SYNTAX MSEscapeMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that describe a escape mac to be added to a mirror session." INDEX { mSEscapeMacIndex } ::= { mSEscapeMacTable 1 } MSEscapeMacEntry ::= SEQUENCE { mSEscapeMacIndex INTEGER, mSEscapeMacAddress OCTET STRING, mSEscapeMacMask OCTET STRING, mSEscapeMacRowStatus RowStatus } mSEscapeMacIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of a escape mac.Range 1~2." ::= { mSEscapeMacEntry 1 } mSEscapeMacAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify certain mac address as special and not mirror." ::= { mSEscapeMacEntry 2 } mSEscapeMacMask OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Mac mask of mirror Specify certain mac address." ::= { mSEscapeMacEntry 3 } mSEscapeMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1). 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mSEscapeMacEntry 4 } -- Sub Module: PORTSECURITY -- -- Node definitions -- portSecurityObject OBJECT IDENTIFIER ::= { portSecurity 1 } portSecurityPortTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the securityStatus of each secure port. Each port can have a number of authorised MAC addresses, and these are stored in the portSecurityStaticAddressTable and portSecurityDynamicAddressTable." ::= { portSecurityObject 1 } portSecurityPortEntry OBJECT-TYPE SYNTAX PortSecurityPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a Rowin this table for each secure port and It is indexed using the object ifIndex in RFC1213-MIB." INDEX { ifIndex } ::= { portSecurityPortTable 1 } PortSecurityPortEntry ::= SEQUENCE { portSecurityEnable INTEGER, portSecurityViolationMode INTEGER, portSecurityMaximumNumberOfMacAddresses Integer32, portSecurityCurrentNumberOfMacAddresses Integer32 } portSecurityEnable OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the system wide operation of mac-authentication. The system-wide mac-authentication options become non-operational when this attribute is set to disabled." ::= { portSecurityPortEntry 1 } portSecurityViolationMode OBJECT-TYPE SYNTAX INTEGER { protect(0), restrict(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute determines what action to be taken when a security violation is detected protect(0): discard packet silently restrict(1): discard packet and print log shutdown(2): discard packet, log and set the interface error-disabled." ::= { portSecurityPortEntry 2 } portSecurityMaximumNumberOfMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the maximum value that mac addresses can be learned. Those objects are bound by the relationship: staticNumberOfConfiguredMacAddresses <= totalNumberOfMacAddresses <= portSecurityMaximumMacAddresses." ::= { portSecurityPortEntry 3 } portSecurityCurrentNumberOfMacAddresses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates thecurrent number of Mac Addresses." ::= { portSecurityPortEntry 4 } portSecurityStaticAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityStaticAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the static MAC addresses assigned to each port." ::= { portSecurityObject 2 } portSecurityStaticAddressEntry OBJECT-TYPE SYNTAX PortSecurityStaticAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the static MAC addresses assigned to each port." INDEX { ifIndex, portSecurityStaticMacAddress, portSecurityStaticVlanId } ::= { portSecurityStaticAddressTable 1 } PortSecurityStaticAddressEntry ::= SEQUENCE { portSecurityStaticPortIndex Integer32, portSecurityStaticVlanId Integer32, portSecurityStaticMacAddress Integer32, portSecurityStaticRowStatus RowStatus } portSecurityStaticPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port index which port security is configured. This is the first index into the portSecurityStaticAddressTable." ::= { portSecurityStaticAddressEntry 1 } portSecurityStaticVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vlan ID associate with the port and the MAC address. This is the second index into the portSecurityStaticAddressTable." ::= { portSecurityStaticAddressEntry 2 } portSecurityStaticMacAddress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of a station assigned to this port. The index format of mac address '01:02:0a:0b:ff:ff' should be '1.2.10.11.255.255' This is the third index into the portSecurityStaticAddressTable." ::= { portSecurityStaticAddressEntry 3 } portSecurityStaticRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { portSecurityStaticAddressEntry 4 } portSecurityDynamicAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityDynamicAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the dynamic MAC addresses which are learned each port." ::= { portSecurityObject 3 } portSecurityDynamicAddressEntry OBJECT-TYPE SYNTAX PortSecurityDynamicAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the dynamic MAC addresses which are learned each port." INDEX { ifIndex, portSecurityDynamicMacAddress, portSecurityDynamicVlanId } ::= { portSecurityDynamicAddressTable 1 } PortSecurityDynamicAddressEntry ::= SEQUENCE { portSecurityDynamicVlanId Integer32, portSecurityDynamicMacAddress MacAddress, portSecurityDynamicPortName OCTET STRING } portSecurityDynamicVlanId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vlan ID associate with the port and the MAC address. This is the third index into the portSecurityDynamicAddressTable." ::= { portSecurityDynamicAddressEntry 1 } portSecurityDynamicMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of a station assigned to this port.This is the second index into the portSecurityDynamicAddressTable." ::= { portSecurityDynamicAddressEntry 2 } portSecurityDynamicPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port name which port security is configured." ::= { portSecurityDynamicAddressEntry 3 } -- Sub Module:stormCONTROL stormControlObject OBJECT IDENTIFIER ::= {stormControl 1 } stormControlUnicastTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name and storm control unicast mode,level and pps. " ::= { stormControlObject 1 } stormControlUnicastEntry OBJECT-TYPE SYNTAX StormControlUnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name and storm control unicast mode and level. " INDEX { ifIndex } ::= { stormControlUnicastTable 1 } StormControlUnicastEntry ::= SEQUENCE { stormControlUnicastPortName OCTET STRING, stormControlUnicastMode INTEGER, stormControlUnicastLevel OCTET STRING , stormControlUnicastPps Integer32, stormControlUnicastRowStatus RowStatus } stormControlUnicastPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of interface which is configuredstorm control." ::= {stormControlUnicastEntry 1 } stormControlUnicastMode OBJECT-TYPE SYNTAX INTEGER { packetPerSecond(1), level(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates which unicast mode is configured whenstorm control is used. 1 PacketPerSecond. 2 Level." ::= {stormControlUnicastEntry 2 } stormControlUnicastLevel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "When unicast mode is configured Level,this indicates the percentage of bandwith. The valid range is (0.00-100.00)." ::= {stormControlUnicastEntry 3 } stormControlUnicastPps OBJECT-TYPE SYNTAX Integer32 (0..1000000000) MAX-ACCESS read-create STATUS current DESCRIPTION "When unicast mode is configured PacketPerSecond, this indicates the number of packet per second." ::= {stormControlUnicastEntry 4 } stormControlUnicastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= {stormControlUnicastEntry 5 } stormControlBroadcastTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name and storm control broadcast mode,level and pps. " ::= { stormControlObject 2 } stormControlBroadcastEntry OBJECT-TYPE SYNTAX StormControlBroadcastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name andstorm control broadcast mode and level." INDEX { ifIndex } ::= {stormControlBroadcastTable 1 } StormControlBroadcastEntry ::= SEQUENCE { stormControlBroadcastPortName OCTET STRING , stormControlBroadcastMode INTEGER, stormControlBroadcastLevel OCTET STRING , stormControlBroadcastPps Integer32, stormControlBroadcastRowStatus RowStatus } stormControlBroadcastPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of interface which is configuredstorm control." ::= {stormControlBroadcastEntry 1 } stormControlBroadcastMode OBJECT-TYPE SYNTAX INTEGER { packetPerSecond(1), level(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates which broadcast mode is configured whenstorm control is used. 1 PacketPerSecond. 2 Level." ::= {stormControlBroadcastEntry 2 } stormControlBroadcastLevel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "When broadcast mode is configured Level,this indicates the percentage of bandwith. The valid range is (0.00-100.00)." ::= {stormControlBroadcastEntry 3 } stormControlBroadcastPps OBJECT-TYPE SYNTAX Integer32 (0..1000000000) MAX-ACCESS read-create STATUS current DESCRIPTION "When broadcast mode is configured PacketPerSecond, this indicates the number of packet per second." ::= {stormControlBroadcastEntry 4 } stormControlBroadcastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= {stormControlBroadcastEntry 5 } stormControlMulticastTable OBJECT-TYPE SYNTAX SEQUENCE OF StormControlMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name andstorm control multicast mode and level." ::= {stormControlObject 3 } stormControlMulticastEntry OBJECT-TYPE SYNTAX StormControlMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the port name andstorm control multicast,level and pps." INDEX { ifIndex } ::= {stormControlMulticastTable 1 } StormControlMulticastEntry ::= SEQUENCE { stormControlMulticastPortName OCTET STRING , stormControlMulticastMode INTEGER, stormControlMulticastLevel OCTET STRING , stormControlMulticastPps Integer32, stormControlMulticastRowStatus RowStatus } stormControlMulticastPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of interface which is configuredstorm control." ::= {stormControlMulticastEntry 1 } stormControlMulticastMode OBJECT-TYPE SYNTAX INTEGER { packetPerSecond(1), level(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates which multicast mode is configured whenstorm control is used. 1 PacketPerSecond. 2 Level." ::= {stormControlMulticastEntry 2 } stormControlMulticastLevel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "When multicast mode is configured Level,this indicates the percentage of bandwith. The valid range is (0.00-100.00)." ::= {stormControlMulticastEntry 3 } stormControlMulticastPps OBJECT-TYPE SYNTAX Integer32 (0..1000000000) MAX-ACCESS read-create STATUS current DESCRIPTION "When multicast mode is configured PacketPerSecond, this indicates the number of packet per second." ::= {stormControlMulticastEntry 4 } stormControlMulticastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= {stormControlMulticastEntry 5 } -- Sub Module: NTP ntpObject OBJECT IDENTIFIER ::= { ntp 1 } ntpStratum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-255, secondary reference (via NTP) " ::= { ntpObject 1 } ntpReferenceClockIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the reference clock ip address." ::= { ntpObject 2 } ntpFrequency OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency of local clock relative to the primary reference source." ::= { ntpObject 3 } ntpPrecision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Precision : This is a signed integer indicating the precision relative to the reference clock ip." ::= { ntpObject 4 } ntpReferenceTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the local time." ::= { ntpObject 5 } ntpRootDelay OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds." ::= { ntpObject 6 } ntpRootDispersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.Only positive values greater than zero are possible." ::= { ntpObject 7 } ntpPeerDispersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed fixed-point number indicating the maximum error of the local clock relative to the primary reference source at the root of the synchronization subnet.Only positive values greater than zero are possible." ::= { ntpObject 8 } ntpClockOffset OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed, fixed-point number indicating the offset of the local clock relative to the primary clock, in seconds." ::= { ntpObject 9 } ntpStability OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed, fixed-point number indicating the stability of the local clock relative to the primary clock, in seconds." ::= { ntpObject 10 } ntpAssoTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAssoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information about the peers and servers with which the local NTP has associations." ::= { ntpObject 11 } ntpAssoEntry OBJECT-TYPE SYNTAX NtpAssoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each association entry provides NTP information retrieved from a particular initiative peer or server.Each peer or server is identified by a unique association identifier. Entries are automatically created when the user configures the passive peer to unicast peer list or the passive server to unicast server list." INDEX { ntpAssoRemoteIpAddress } ::= { ntpAssoTable 1 } NtpAssoEntry ::= SEQUENCE { ntpAssoRemoteIpAddress IpAddress, ntpAssoRefId OCTET STRING, ntpAssoStratum OCTET STRING, ntpAssoWhen OCTET STRING, ntpAssoPoll OCTET STRING, ntpAssoReach OCTET STRING, ntpAssoDelay OCTET STRING, ntpAssoOffset OCTET STRING, ntpAssoDispersion OCTET STRING } ntpAssoRemoteIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the initiative peer or server." ::= { ntpAssoEntry 1 } ntpAssoRefId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The reference identifier of the peer or server." ::= { ntpAssoEntry 2 } ntpAssoStratum OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a integer indicating the stratum level of the peer of server clock." ::= { ntpAssoEntry 3 } ntpAssoWhen OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a round second clock whose value change from 1 to 60." ::= { ntpAssoEntry 4 } ntpAssoPoll OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The interval at which the local host polls the peer." ::= { ntpAssoEntry 5 } ntpAssoReach OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a shift register of NTP which is used to determine the reach abilityStatus of the peer." ::= { ntpAssoEntry 6 } ntpAssoDelay OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds." ::= { ntpAssoEntry 7 } ntpAssoOffset OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed, fixed-point number indicating the offset of the peer clock or server clock relative to the local clock, in seconds." ::= { ntpAssoEntry 8 } ntpAssoDispersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a signed fixed-point number indicating the maximum error of the peer or server clock relative to the primary reference source." ::= { ntpAssoEntry 9 } ntpUniPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpUniPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides ipaddress about the peer with which the local NTP has associations.This Table support create and destroy association peer entry." ::= { ntpObject 12 } ntpUniPeerEntry OBJECT-TYPE SYNTAX NtpUniPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides ipaddress about the peer with which the local NTP has associations.This table support create and destroy association peer entry." INDEX { ntpUnicastPeerIpAddress } ::= { ntpUniPeerTable 1 } NtpUniPeerEntry ::= SEQUENCE{ ntpUnicastPeerIpAddress IpAddress, ntpUnicastPeerKey Integer32, ntpUnicastPeerVersion Integer32, ntpUnicastPeerPrefer INTEGER, ntpUnicastPeerRowStatus RowStatus } ntpUnicastPeerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the initiative peer." ::= { ntpUniPeerEntry 1 } ntpUnicastPeerKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The peer use which authentication key pair." ::= { ntpUniPeerEntry 2 } ntpUnicastPeerVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP verion of the peer." ::= { ntpUniPeerEntry 3 } ntpUnicastPeerPrefer OBJECT-TYPE SYNTAX INTEGER { prefer(1), noPrefer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the NTP peer is a preferred peer." ::= { ntpUniPeerEntry 4 } ntpUnicastPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ntpUniPeerEntry 5 } ntpUniServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpUniServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides ipaddress about the server with which the local NTP has associations.This table support create and destroy association server entry." ::= { ntpObject 13 } ntpUniServerEntry OBJECT-TYPE SYNTAX NtpUniServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides ipaddress about the server with which the local NTP has associations.This table support create and destroy association server entry." INDEX { ntpUnicastServerIpAddress } ::= { ntpUniServerTable 1 } NtpUniServerEntry ::= SEQUENCE{ ntpUnicastServerIpAddress IpAddress, ntpUnicastServerKey Integer32, ntpUnicastServerVersion Integer32, ntpUnicastServerPrefer INTEGER, ntpUnicastServerRowStatus RowStatus } ntpUnicastServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the initiative server." ::= { ntpUniServerEntry 1 } ntpUnicastServerKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The server use which authentication key pair." ::= { ntpUniServerEntry 2 } ntpUnicastServerVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP verion of the server." ::= { ntpUniServerEntry 3 } ntpUnicastServerPrefer OBJECT-TYPE SYNTAX INTEGER { prefer(1), noPrefer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the NTP server is a preferred server." ::= { ntpUniServerEntry 4 } ntpUnicastServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ntpUniServerEntry 5 } ntpLocalRefClockStratum OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The stratum of local reference clock.If the value is 16, disable local reference clock." ::= { ntpObject 14 } ntpSysAuthenticate OBJECT-TYPE SYNTAX INTEGER { noAuthenticate(0), authenticate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is a integer indicating that system support authentication." ::= { ntpObject 15 } ntpBroadcastDelay OBJECT-TYPE SYNTAX Integer32 (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "The broadcast delay of ntp broadcast mode." ::= { ntpObject 16 } -- -- NTP key -- ntpKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of authentication key pair." ::= { ntpObject 17 } ntpKeyEntry OBJECT-TYPE SYNTAX NtpKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of authentication key pair." INDEX { ntpKeyID } ::= { ntpKeyTable 1 } NtpKeyEntry ::= SEQUENCE { ntpKeyID Integer32, ntpKeyPair OCTET STRING, ntpKeyRowStatus RowStatus } ntpKeyID OBJECT-TYPE SYNTAX Integer32 (1..64000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "NTP authentication key ID " ::= { ntpKeyEntry 1 } ntpKeyPair OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "NTP authentication key pair." ::= { ntpKeyEntry 2 } ntpKeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ntpKeyEntry 3 } -- -- NTP trust key -- ntpTrustKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpTrustKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of authentication key pair that trusted." ::= { ntpObject 18 } ntpTrustKeyEntry OBJECT-TYPE SYNTAX NtpTrustKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of authentication key pair that trusted." INDEX { ntpKeyID } ::= { ntpTrustKeyTable 1 } NtpTrustKeyEntry ::= SEQUENCE { ntpTrustKeyID Integer32, ntpTrustKeyTrust Integer32 } ntpTrustKeyID OBJECT-TYPE SYNTAX Integer32(1..64000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "NTP authentication key ID " ::= { ntpTrustKeyEntry 1 } ntpTrustKeyTrust OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "NTP authentication key pair trust." ::= { ntpTrustKeyEntry 2 } ntpInterfaceReload OBJECT-TYPE SYNTAX INTEGER { reloadInterface(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reload interfaces." ::= { ntpObject 19 } ntpTimeResetStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of time since reset." ::= { ntpObject 20 } ntpRcvBufferStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of receive buffers." ::= { ntpObject 21 } ntpFreeRcvBufferStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of free receive buffers." ::= { ntpObject 22 } ntpUsedRcvBufferStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of used receive buffers." ::= { ntpObject 23 } ntpLowWaterRefillStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of low water refills." ::= { ntpObject 24 } ntpDroppedPktStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of dropped packets." ::= { ntpObject 25 } ntpIgnoredPktStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of ignored packets." ::= { ntpObject 26 } ntpReceivedPktStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of received packets." ::= { ntpObject 27 } ntpPktSentStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of packets sent." ::= { ntpObject 28 } ntpPktNotSentStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of packets not sent." ::= { ntpObject 29 } ntpInterruptsHandledStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of interrupts handled." ::= { ntpObject 30 } ntpReceivedByIntStatistic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP I/O statistics of received by int." ::= { ntpObject 31 } -- -- NTP Access Control Entries(ACE) Table -- ntpAceTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table create the Access Control Entries (ACE) of a NTP server/peer." ::= { ntpObject 32 } ntpAceEntry OBJECT-TYPE SYNTAX NtpAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of NTP ACE." INDEX { ntpAceIndex } ::= { ntpAceTable 1 } NtpAceEntry ::= SEQUENCE { ntpAceIndex Integer32, ntpAceAddress OCTET STRING, ntpAceMask OCTET STRING, ntpAceVersion INTEGER, ntpAceKod INTEGER, ntpAceIgnore INTEGER, ntpAceNoquery INTEGER, ntpAceNomodify INTEGER, ntpAceNotrap INTEGER, ntpAceNoserver INTEGER, ntpAceNopeer INTEGER, ntpAceNotrust INTEGER, ntpAceLimited INTEGER, ntpAceRowStatus RowStatus } ntpAceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "NTP ace list index." ::= { ntpAceEntry 1 } ntpAceAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ip address or hostname of NTP restrict peer." ::= { ntpAceEntry 2 } ntpAceMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Mask of NTP restrict peer. Default value is 255.255.255.255" ::= { ntpAceEntry 3 } ntpAceVersion OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ignore these hosts if not the current NTP version.enable(1),disable(2)." DEFVAL{ 2 } ::= { ntpAceEntry 4 } ntpAceKod OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If access is denied, send a kiss-of-death packet." DEFVAL{ 2 } ::= { ntpAceEntry 5 } ntpAceIgnore OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ignore all packets from host that match this entry." DEFVAL{ 2 } ::= { ntpAceEntry 6 } ntpAceNoquery OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ignore all NTP mode 6 and 7 packets from the source. Time service is not affected." DEFVAL{ 2 } ::= { ntpAceEntry 7 } ntpAceNomodify OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ignore all NTP mode 6 and 7 packets which attempt to modify the stateof the server." DEFVAL{ 2 } ::= { ntpAceEntry 8 } ntpAceNotrap OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Decline to provide mode 6 control message trap service to matching hosts." DEFVAL{ 2 } ::= { ntpAceEntry 9 } ntpAceNoserver OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ignore NTP packets whose mode is other than 6 or 7." DEFVAL{ 2 } ::= { ntpAceEntry 10 } ntpAceNopeer OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Provide stateless time service to polling hosts, but do not allocate peer memory resources." DEFVAL{ 2 } ::= { ntpAceEntry 11 } ntpAceNotrust OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Treat these hosts normally in other respects, but never use them as synchronization sources." DEFVAL{ 2 } ::= { ntpAceEntry 12 } ntpAceLimited OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "These hosts are subject to limitation of number of clients from the same net." DEFVAL{ 2 } ::= { ntpAceEntry 13 } ntpAceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ntpAceEntry 20 } -- -- NTP current restrict list -- ntpRestrictTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpRestrictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of NTP current restrict list." ::= { ntpObject 33 } ntpRestrictEntry OBJECT-TYPE SYNTAX NtpRestrictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of NTP restrict." INDEX { ntpRestrictIndex } ::= { ntpRestrictTable 1 } NtpRestrictEntry ::= SEQUENCE { ntpRestrictIndex Integer32, ntpRestrictAddress OCTET STRING, ntpRestrictMask OCTET STRING, ntpRestrictCount Integer32, ntpRestrictFlag OCTET STRING } ntpRestrictIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "NTP current restrict list index." ::= { ntpRestrictEntry 1 } ntpRestrictAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NTP current restrict address." ::= { ntpRestrictEntry 2 } ntpRestrictMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NTP current restrict mask." ::= { ntpRestrictEntry 3 } ntpRestrictCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "NTP current restrict count value." ::= { ntpRestrictEntry 4 } ntpRestrictFlag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "NTP current restrict flags." ::= { ntpRestrictEntry 5 } -- Sub Module: ACL -- Rule action value RuleAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of rule's action. permit: The packet matching the rule will be permitted to forward. deny: The packet matching the rule will be denied. " SYNTAX INTEGER { permit(1), deny(2) } -- CounterClear value CounterClear ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "cleared: Reset the value of the rule's counter. nouse: 'nouse' will be returned when getting. " SYNTAX INTEGER { cleared(1), nouse(2) } -- PortOp value PortOp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The operation type of TCP and UDP. lt : Less than given port number. eq : Equal to given port number. gt : Greater than given port number. -- neq : Not equal to given port number. range : Between two port numbers. " SYNTAX INTEGER { eq(0), -- neq(1), gt(2), lt(3), range(4), invalid(5) } -- Precedence value PrecedenceValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) " SYNTAX Integer32 (0..7|255) -- DSCP value DSCPValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of DSCP. <0-64> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) nouse Do not use this filter(64) " SYNTAX Integer32 (0..64) -- -- nodes defined -- aclData OBJECT IDENTIFIER ::= { acl 1 } -- -- Node of aclGroupTable -- aclGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AclGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the match-order of number-acl group." ::= { aclData 1 } aclGroupEntry OBJECT-TYPE SYNTAX AclGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclGroupTable." INDEX { aclGroupIndex } ::= { aclGroupTable 1 } AclGroupEntry ::= SEQUENCE { aclGroupIndex Integer32, aclGroupName OCTET STRING, aclGroupRuleNum Unsigned32, aclGroupRowStatus RowStatus, aclGroupDescription OCTET STRING } aclGroupIndex OBJECT-TYPE SYNTAX Integer32 (10001..80000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of acl group. MAC type :10001..20000 IP Extend type :20001..30000 IP type :30001..40000 IPv6 type :40001..50000 IPv6 Extend type :50001..60000 MLPS type :60001..70000 MPLS Extend type :70001..80000." ::= { aclGroupEntry 1 } aclGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of acl group. Range 0~20." ::= { aclGroupEntry 2 } aclGroupRuleNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of rules in this acl group." ::= { aclGroupEntry 3 } aclGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclGroupEntry 4 } aclGroupDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "The description of this acl group.Up to 100 characters.Range 0~100." ::= { aclGroupEntry 5 } -- -- Nodes of aclMacRuleTable -- aclMacRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. " ::= { aclData 2 } aclMacRuleEntry OBJECT-TYPE SYNTAX AclMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC acl group information." INDEX { aclMacGroupIndex, aclMacRuleIndex } ::= { aclMacRuleTable 1 } AclMacRuleEntry ::= SEQUENCE { aclMacGroupIndex Integer32, aclMacRuleIndex Integer32, aclMacAct RuleAction, aclMacSrcMac MacAddress , aclMacSrcMacWild MacAddress , aclMacDestMac MacAddress , aclMacDestMacWild MacAddress , aclMacProtocol OCTET STRING, aclMacProtocolWild OCTET STRING, aclMacType Integer32, aclMacVlanId Integer32, aclMacInnerVlanId Integer32, aclMacCos Integer32, aclMacInnerCos Integer32, aclMacTimeRangeName OCTET STRING, aclMacRowStatus RowStatus } aclMacGroupIndex OBJECT-TYPE SYNTAX Integer32 (10001..30000|50001..60000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of MAC-based acl group.Range is 10001~30000 and 50001~60000." ::= { aclMacRuleEntry 1 } aclMacRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of MAC-based acl group. Range 1~131071." ::= { aclMacRuleEntry 2 } aclMacAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of MAC acl rule. (1) permit. (2) deny." ::= { aclMacRuleEntry 3 } aclMacSrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC of MAC acl rule. If you do not want to use this filter, set this item with any valid value and set aclMacSrcMacWild 'FFFF.FFFF.FFFF'." ::= { aclMacRuleEntry 4 } aclMacSrcMacWild OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC wildcard of MAC acl rule. If you do not want to use this filter, set aclMacSrcMac with any valid value and set this item 'FFFF.FFFF.FFFF'." ::= { aclMacRuleEntry 5 } aclMacDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC of MAC acl rule. If you do not want to use this filter, set this item with any valid value and set aclMacDestMacWild 'FFFF.FFFF.FFFF'." ::= { aclMacRuleEntry 6 } aclMacDestMacWild OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC wildcard of MAC acl rule. If you do not want to use this filter, set aclMacDestMac with any valid value and set this item 'FFFF.FFFF.FFFF'." ::= { aclMacRuleEntry 7 } aclMacProtocol OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ether type in decimal/hexadecimal, ranging in <0x0-0xffff>. (aclMacProtocol = 0, aclMacProtocolWild = 0xffff) means any protocols. " ::= { aclMacRuleEntry 8 } aclMacProtocolWild OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "Ether type wildcard in decimal/hexadecimal, ranging in <0x0-0xffff>, reversely encoded. (aclMacProtocol = 0, aclMacProtocolWild = 0xffff) means any protocols. " ::= { aclMacRuleEntry 9 } aclMacType OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The type of protocol nouse(0) eth2(1) sap(2) snap(3) " ::= { aclMacRuleEntry 10 } aclMacVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan id of MAC acl rule.Range 0~4094. nouse(0) " ::= { aclMacRuleEntry 11 } aclMacInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The inner vlan id of MAC acl rule. Range 0~4094 nouse(0) " ::= { aclMacRuleEntry 12 } aclMacCos OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Vlan priority of MAC acl rule.Range 0~8 nouse(8)." ::= { aclMacRuleEntry 13 } aclMacInnerCos OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Inner vlan priority of MAC acl rule.Range 0~8. nouse(8)." ::= { aclMacRuleEntry 14 } aclMacTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of MAC acl rule.Range 0~20." ::= { aclMacRuleEntry 15 } aclMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclMacRuleEntry 30 } -- -- aclIpRuleTable -- aclIpRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclIpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for ip acl group." ::= { aclData 3 } aclIpRuleEntry OBJECT-TYPE SYNTAX AclIpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclIpRuleTable." INDEX { aclIpGroupIndex, aclIpRuleIndex } ::= { aclIpRuleTable 1 } AclIpRuleEntry ::= SEQUENCE { aclIpGroupIndex Integer32, aclIpRuleIndex Integer32, aclIpAct RuleAction, aclIpProtocol Integer32, aclIpSrcIp IpAddress, aclIpSrcWild IpAddress, aclIpDestIp IpAddress, aclIpDestWild IpAddress, aclIpPrecedence Integer32, aclIpDscp DSCPValue, aclIpFragments TruthValue, aclIpRouted TruthValue, aclIpOptions TruthValue, aclIpTimeRangeName OCTET STRING, aclIpRowStatus RowStatus } aclIpGroupIndex OBJECT-TYPE SYNTAX Integer32 (20001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of ip acl group. Range 20001~40000." ::= { aclIpRuleEntry 1 } aclIpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of ip acl rule.Range 1~131071." ::= { aclIpRuleEntry 2 } aclIpAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of ip acl rule. (1) permit. (2) deny." ::= { aclIpRuleEntry 3 } aclIpProtocol OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol-type of Ip acl group. <0-255> Protocol number Icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) nouse Do not use this filter(256) " ::= { aclIpRuleEntry 4 } aclIpSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address of ip acl group." ::= { aclIpRuleEntry 5 } aclIpSrcWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address wild of ip acl group." ::= { aclIpRuleEntry 6 } aclIpDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address of ip acl group." ::= { aclIpRuleEntry 7 } aclIpDestWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address wild of ip acl group." ::= { aclIpRuleEntry 8 } aclIpPrecedence OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of Precedence.8 means do not use this filter.Range 0~8. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIpDscp is setted." ::= { aclIpRuleEntry 9 } aclIpDscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIpPrecedence is setted." ::= { aclIpRuleEntry 10 } aclIpFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2)." ::= { aclIpRuleEntry 11 } aclIpRouted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclIpRuleEntry 12 } aclIpOptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching packet with ip option. True(1),False(2)." ::= { aclIpRuleEntry 13 } aclIpTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of Ip acl rule.String length range 0~20." ::= { aclIpRuleEntry 14 } aclIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclIpRuleEntry 16 } -- -- aclTcpRuleTable -- aclTcpRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTcpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for tcp acl group." ::= { aclData 4 } aclTcpRuleEntry OBJECT-TYPE SYNTAX AclTcpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of hh3cAclTcpRuleTable." INDEX { aclTcpGroupIndex, aclTcpRuleIndex } ::= { aclTcpRuleTable 1 } AclTcpRuleEntry ::= SEQUENCE { aclTcpGroupIndex Integer32, aclTcpRuleIndex Integer32, aclTcpAct RuleAction, aclTcpSrcIp IpAddress, aclTcpSrcWild IpAddress, aclTcpDestIp IpAddress, aclTcpDestWild IpAddress, aclTcpPrecedence Integer32, aclTcpDscp DSCPValue, aclTcpFragments TruthValue, aclTcpRouted TruthValue, aclTcpOptions TruthValue, aclTcpSrcOp PortOp, aclTcpSrcPort1 Integer32, aclTcpSrcPort2 Integer32, aclTcpDestOp PortOp, aclTcpDestPort1 Integer32, aclTcpDestPort2 Integer32, aclTcpFlagOp INTEGER, aclTcpFlagUrg TruthValue, aclTcpFlagAck TruthValue, aclTcpFlagPsh TruthValue, aclTcpFlagRst TruthValue, aclTcpFlagSyn TruthValue, aclTcpFlagFin TruthValue, aclTcpTimeRangeName OCTET STRING, aclTcpRowStatus RowStatus } aclTcpGroupIndex OBJECT-TYPE SYNTAX Integer32 (20001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of tcp acl group. Range 20001~40000." ::= { aclTcpRuleEntry 1 } aclTcpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of tcp acl group. Range 1~131071." ::= { aclTcpRuleEntry 2 } aclTcpAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of tcp acl rule. (1) permit. (2) deny." ::= { aclTcpRuleEntry 3 } aclTcpSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address of tcp acl group." ::= { aclTcpRuleEntry 4 } aclTcpSrcWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address wild of tcp acl group." ::= { aclTcpRuleEntry 5 } aclTcpDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address of tcp acl group." ::= { aclTcpRuleEntry 6 } aclTcpDestWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address wild of tcp acl group." ::= { aclTcpRuleEntry 7 } aclTcpPrecedence OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of Precedence.8 means do not use this filter.Range 0~8. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclTcpDscp is setted." ::= { aclTcpRuleEntry 8 } aclTcpDscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclTcpPrecedence is setted." ::= { aclTcpRuleEntry 9 } aclTcpFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2). This node can not be setted true for aclTcpSrcOp or aclTcpDestOp is setted." ::= { aclTcpRuleEntry 10 } aclTcpRouted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclTcpRuleEntry 11 } aclTcpOptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching packet with ip option. True(1),False(2)." ::= { aclTcpRuleEntry 12 } aclTcpSrcOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The source port's operator of tcp acl group. This node can not be setted if aclTcpFragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclTcpRuleEntry 13 } aclTcpSrcPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port1. Range 0~65535. " ::= { aclTcpRuleEntry 14 } aclTcpSrcPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port2. Range 0~65535." ::= { aclTcpRuleEntry 15 } aclTcpDestOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The destination port's operator of tcp acl group. This node can not be setted if aclTcpFragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclTcpRuleEntry 16 } aclTcpDestPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port1. Range 0~65535." ::= { aclTcpRuleEntry 17 } aclTcpDestPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port2. Range 0~65535." ::= { aclTcpRuleEntry 18 } aclTcpFlagOp OBJECT-TYPE SYNTAX INTEGER { matchAny(0), matchAll(1), invalid(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-flags' operator of tcp acl group.for example, established tcp packet with ack or rst flag setted, set this node matchAny(0) and set aclTcpFlagAck and aclTcpFlagRst can filter established tcp packet. matchAny(0), matchAll(1), invalid(2)." ::= { aclTcpRuleEntry 19 } aclTcpFlagUrg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-urg flag of tcp acl group. True(1),False(2). TCP protocol URG Packet." ::= { aclTcpRuleEntry 20 } aclTcpFlagAck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-ack flag of tcp acl group. TCP protocol ACK Packet. True(1),False(2)." ::= { aclTcpRuleEntry 21 } aclTcpFlagPsh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-psh flag of tcp acl group. True(1),False(2). TCP protocol PSH Packet." ::= { aclTcpRuleEntry 22 } aclTcpFlagRst OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-rst flag of tcp acl group. True(1),False(2). TCP protocol RST Packet." ::= { aclTcpRuleEntry 23 } aclTcpFlagSyn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-syn flag of tcp acl group. True(1),False(2). TCP protocol SYN Packet." ::= { aclTcpRuleEntry 24 } aclTcpFlagFin OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-fin flag of tcp acl group. True(1),False(2). TCP protocol FIN Packet." ::= { aclTcpRuleEntry 25 } aclTcpTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of tcp acl rule." ::= { aclTcpRuleEntry 26 } aclTcpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclTcpRuleEntry 28 } -- -- aclUdpRuleTable -- aclUdpRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclUdpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for udp acl group." ::= { aclData 5 } aclUdpRuleEntry OBJECT-TYPE SYNTAX AclUdpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclUdpRuleTable." INDEX { aclUdpGroupIndex, aclUdpRuleIndex } ::= { aclUdpRuleTable 1 } AclUdpRuleEntry ::= SEQUENCE { aclUdpGroupIndex Integer32, aclUdpRuleIndex Integer32, aclUdpAct RuleAction, aclUdpSrcIp IpAddress, aclUdpSrcWild IpAddress, aclUdpDestIp IpAddress, aclUdpDestWild IpAddress, aclUdpPrecedence Integer32, aclUdpDscp DSCPValue, aclUdpFragments TruthValue, aclUdpRouted TruthValue, aclUdpOptions TruthValue, aclUdpSrcOp PortOp, aclUdpSrcPort1 Integer32, aclUdpSrcPort2 Integer32, aclUdpDestOp PortOp, aclUdpDestPort1 Integer32, aclUdpDestPort2 Integer32, aclUdpTimeRangeName OCTET STRING, aclUdpRowStatus RowStatus } aclUdpGroupIndex OBJECT-TYPE SYNTAX Integer32 (20001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of udp acl group. Range 20001~40000." ::= { aclUdpRuleEntry 1 } aclUdpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of udp acl group. Range 1~131071." ::= { aclUdpRuleEntry 2 } aclUdpAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of udp acl rule. (1) permit. (2) deny" ::= { aclUdpRuleEntry 3 } aclUdpSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address of udp acl group." ::= { aclUdpRuleEntry 4 } aclUdpSrcWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address wild of udp acl group." ::= { aclUdpRuleEntry 5 } aclUdpDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address of udp acl group." ::= { aclUdpRuleEntry 6 } aclUdpDestWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address wild of udp acl group." ::= { aclUdpRuleEntry 7 } aclUdpPrecedence OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of Precedence.8 means do not use this filter.Range 0~8. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclUdpDscp is setted." ::= { aclUdpRuleEntry 8 } aclUdpDscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclUdpPrecedence is setted." ::= { aclUdpRuleEntry 9 } aclUdpFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2). This node can not be setted true for aclUdpSrcOp or aclUdpDestOp is setted." ::= { aclUdpRuleEntry 10 } aclUdpRouted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclUdpRuleEntry 11 } aclUdpOptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching packet with ip option. True(1),False(2)." ::= { aclUdpRuleEntry 12 } aclUdpSrcOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The source port's operator of udp acl group. This node can not be setted if aclUdpFragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclUdpRuleEntry 13 } aclUdpSrcPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port1. Range 0~65535." ::= { aclUdpRuleEntry 14 } aclUdpSrcPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port2. Range 0~65535." ::= { aclUdpRuleEntry 15 } aclUdpDestOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The destination port's operator of udp acl group. This node can not be setted if aclUdpFragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclUdpRuleEntry 16 } aclUdpDestPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port1. Range 0~65535." ::= { aclUdpRuleEntry 17 } aclUdpDestPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port2. Range 0~65535." ::= { aclUdpRuleEntry 18 } aclUdpTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of udp acl rule. Range 0~20." ::= { aclUdpRuleEntry 19 } aclUdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclUdpRuleEntry 21 } -- -- aclIcmpRuleTable -- aclIcmpRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclIcmpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for icmp acl group." ::= { aclData 6 } aclIcmpRuleEntry OBJECT-TYPE SYNTAX AclIcmpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclIcmpRuleTable." INDEX { aclIcmpGroupIndex, aclIcmpRuleIndex } ::= { aclIcmpRuleTable 1 } AclIcmpRuleEntry ::= SEQUENCE { aclIcmpGroupIndex Integer32, aclIcmpRuleIndex Integer32, aclIcmpAct RuleAction, aclIcmpSrcIp IpAddress, aclIcmpSrcWild IpAddress, aclIcmpDestIp IpAddress, aclIcmpDestWild IpAddress, aclIcmpPrecedence Integer32, aclIcmpDscp DSCPValue, aclIcmpFragments TruthValue, aclIcmpRouted TruthValue, aclIcmpOptions TruthValue, aclIcmpType Integer32, aclIcmpCode Integer32, aclIcmpTimeRangeName OCTET STRING, aclIcmpRowStatus RowStatus } aclIcmpGroupIndex OBJECT-TYPE SYNTAX Integer32 (20001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of icmp acl group. Range 20001~40000." ::= { aclIcmpRuleEntry 1 } aclIcmpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of icmp acl group. Range 1~131071." ::= { aclIcmpRuleEntry 2 } aclIcmpAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of icmp acl rule. (1) permit. (2) deny" ::= { aclIcmpRuleEntry 3 } aclIcmpSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address of icmp acl group." ::= { aclIcmpRuleEntry 4 } aclIcmpSrcWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address wild of icmp acl group." ::= { aclIcmpRuleEntry 5 } aclIcmpDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address of icmp acl group." ::= { aclIcmpRuleEntry 6 } aclIcmpDestWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address wild of icmp acl group." ::= { aclIcmpRuleEntry 7 } aclIcmpPrecedence OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of Precedence.8 means do not use this filter.Range 0~8. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIcmpDscp is setted." ::= { aclIcmpRuleEntry 8 } aclIcmpDscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIcmpPrecedence is setted." ::= { aclIcmpRuleEntry 9 } aclIcmpFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. This node can not be setted true if aclIcmpType is setted. True(1),False(2)." ::= { aclIcmpRuleEntry 10 } aclIcmpRouted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclIcmpRuleEntry 11 } aclIcmpOptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching packet with ip option. True(1),False(2)." ::= { aclIcmpRuleEntry 12 } aclIcmpType OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of ICMP packet. INTEGER<0-256> ICMP type echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-tos-redirect Type=5, Code=3 host-unreachable Type=3, Code=1 information-reply Type=16, Code=0 information-request Type=15, Code=0 net-redirect Type=5, Code=0 net-tos-redirect Type=5, Code=2 net-unreachable Type=3, Code=0 parameter-problem Type=12, Code=0 port-unreachable Type=3, Code=3 protocol-unreachable Type=3, Code=2 reassembly-timeout Type=11, Code=1 source-quench Type=4, Code=0 source-route-failed Type=3, Code=5 timestamp-reply Type=14, Code=0 timestamp-request Type=13, Code=0 ttl-exceeded Type=11, Code=0 nouse 256 This node can not be setted if aclIcmpFragments is true." ::= { aclIcmpRuleEntry 13 } aclIcmpCode OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The code of ICMP packet.INTEGER<0-256> echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-tos-redirect Type=5, Code=3 host-unreachable Type=3, Code=1 information-reply Type=16, Code=0 information-request Type=15, Code=0 net-redirect Type=5, Code=0 net-tos-redirect Type=5, Code=2 net-unreachable Type=3, Code=0 parameter-problem Type=12, Code=0 port-unreachable Type=3, Code=3 protocol-unreachable Type=3, Code=2 reassembly-timeout Type=11, Code=1 source-quench Type=4, Code=0 source-route-failed Type=3, Code=5 timestamp-reply Type=14, Code=0 timestamp-request Type=13, Code=0 ttl-exceeded Type=11, Code=0 nouse 256 This node can not be setted if aclIcmpType is not setted." ::= { aclIcmpRuleEntry 14 } aclIcmpTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of icmp acl rule. Range 0~20." ::= { aclIcmpRuleEntry 15 } aclIcmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclIcmpRuleEntry 17 } -- -- aclIgmpRuleTable -- aclIgmpRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclIgmpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for igmp acl group." ::= { aclData 7 } aclIgmpRuleEntry OBJECT-TYPE SYNTAX AclIgmpRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclIgmpRuleTable." INDEX { aclIgmpGroupIndex, aclIgmpRuleIndex } ::= { aclIgmpRuleTable 1 } AclIgmpRuleEntry ::= SEQUENCE { aclIgmpGroupIndex Integer32, aclIgmpRuleIndex Integer32, aclIgmpAct RuleAction, aclIgmpSrcIp IpAddress, aclIgmpSrcWild IpAddress, aclIgmpDestIp IpAddress, aclIgmpDestWild IpAddress, aclIgmpPrecedence Integer32, aclIgmpDscp DSCPValue, aclIgmpFragments TruthValue, aclIgmpRouted TruthValue, aclIgmpOptions TruthValue, aclIgmpType INTEGER, aclIgmpTimeRangeName OCTET STRING, aclIgmpRowStatus RowStatus } aclIgmpGroupIndex OBJECT-TYPE SYNTAX Integer32 (20001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of igmp acl group. Range 20001~40000." ::= { aclIgmpRuleEntry 1 } aclIgmpRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of igmp acl group.Range 1~131071." ::= { aclIgmpRuleEntry 2 } aclIgmpAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of igmp acl rule. (1) permit. (2) deny" ::= { aclIgmpRuleEntry 3 } aclIgmpSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address of igmp acl group." ::= { aclIgmpRuleEntry 4 } aclIgmpSrcWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source IP-address wild of igmp acl group." ::= { aclIgmpRuleEntry 5 } aclIgmpDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address of igmp acl group." ::= { aclIgmpRuleEntry 6 } aclIgmpDestWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP-address wild of igmp acl group." ::= { aclIgmpRuleEntry 7 } aclIgmpPrecedence OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of Precedence.8 means do not use this filter.Range 0~8. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIgmpDscp is setted." ::= { aclIgmpRuleEntry 8 } aclIgmpDscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter. DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIgmpPrecedence is setted." ::= { aclIgmpRuleEntry 9 } aclIgmpFragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. This node can not be setted true if aclIgmpType is setted. True(1),False(2)." ::= { aclIgmpRuleEntry 10 } aclIgmpRouted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclIgmpRuleEntry 11 } aclIgmpOptions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching packet with ip option.True(1),False(2)." ::= { aclIgmpRuleEntry 12 } aclIgmpType OBJECT-TYPE SYNTAX INTEGER { precedence(0), hostQuery(17), hostReport(18), dvmrp(19), pim(20), trace(21), v2Report(22), v2Leave(23), mtraceResponse(30), mtrace(31), v3Report(34), invalid(256) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of ICMP packet. 0 precedence 17 host query 18 host report 19 dvmrp 20 pim 21 trace 22 v2 report 23 v2 leave 30 mtrace response 31 mtrace 34 v3 report 256 nouse This node can not be setted if aclIgmpFragments is true." ::= { aclIgmpRuleEntry 13 } aclIgmpTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of igmp acl rule.Range 0~20." ::= { aclIgmpRuleEntry 14 } aclIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { aclIgmpRuleEntry 16 } -- -- Nodes of aclMplsMacRuleTable -- aclMplsMacRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclMplsMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MPLS MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. " ::= { aclData 8 } aclMplsMacRuleEntry OBJECT-TYPE SYNTAX AclMplsMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS MAC acl group information." INDEX { aclMplsMacGroupIndex, aclMplsMacRuleIndex } ::= { aclMplsMacRuleTable 1 } AclMplsMacRuleEntry ::= SEQUENCE { aclMplsMacGroupIndex Integer32, aclMplsMacRuleIndex Integer32, aclMplsMacAct RuleAction, aclMplsMacSrcMac MacAddress , aclMplsMacSrcMacWild MacAddress , aclMplsMacDestMac MacAddress , aclMplsMacDestMacWild MacAddress , aclMplsMacType Integer32, aclMplsMacVlanId Integer32, aclMplsMacInnerVlanId Integer32, aclMplsMacCos Integer32, aclMplsMacInnerCos Integer32, aclMplsMacTimeRangeName OCTET STRING, aclMplsMacRowStatus RowStatus } aclMplsMacGroupIndex OBJECT-TYPE SYNTAX Integer32 (70001..80000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of MPLS MAC-based acl group. Range 70001 ~ 80000." ::= { aclMplsMacRuleEntry 1 } aclMplsMacRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of MPLS MAC-based acl group. Range 1~131071." ::= { aclMplsMacRuleEntry 2 } aclMplsMacAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of MPLS MAC acl rule. (1) permit. (2) deny." ::= { aclMplsMacRuleEntry 3 } aclMplsMacSrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC of MPLS MAC acl rule." ::= { aclMplsMacRuleEntry 4 } aclMplsMacSrcMacWild OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC wildcard of MPLS MAC acl rule." ::= { aclMplsMacRuleEntry 5 } aclMplsMacDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC of MAC acl rule. If you do not want to use this filter, set this item and aclMacDestMacWild 'FF:FF:FF:FF:FF:FF'." ::= { aclMplsMacRuleEntry 6 } aclMplsMacDestMacWild OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC wildcard of MAC acl rule. If you do not want to use this filter, set this item and aclMacDestMac 'FF:FF:FF:FF:FF:FF'." ::= { aclMplsMacRuleEntry 7 } aclMplsMacType OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of protocol nouse(0) eth2(1) sap(2) snap(3) " ::= { aclMplsMacRuleEntry 8 } aclMplsMacVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan id of MAC acl rule.Range 0~4094. nouse(0) " ::= { aclMplsMacRuleEntry 9 } aclMplsMacInnerVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The inner vlan id of MAC acl rule. nouse(0) " ::= { aclMplsMacRuleEntry 10 } aclMplsMacCos OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Vlan priority of MAC acl rule.Range 0~8 nouse(8)." ::= { aclMplsMacRuleEntry 11 } aclMplsMacInnerCos OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Inner vlan priority of MAC acl rule. nouse(8)." ::= { aclMplsMacRuleEntry 12 } aclMplsMacTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of MAC acl rule." ::= { aclMplsMacRuleEntry 13 } aclMplsMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row.Now only realize CreateAndGo and Destroy and Active." ::= { aclMplsMacRuleEntry 20 } -- -- aclMplsLabelRuleTable -- aclMplsLabelRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclMplsLabelRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for Mpls Label acl group." ::= { aclData 9 } aclMplsLabelRuleEntry OBJECT-TYPE SYNTAX AclMplsLabelRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of acl Mpls Label RuleTable." INDEX { aclMplsLabelGroupIndex, aclMplsLabelRuleIndex } ::= { aclMplsLabelRuleTable 1 } AclMplsLabelRuleEntry ::= SEQUENCE { aclMplsLabelGroupIndex Integer32, aclMplsLabelRuleIndex Integer32, aclMplsLabelAct RuleAction, aclMplsLabelLayer Integer32, aclMplsLabel1Value Integer32, aclMplsLabel1Wild OCTET STRING, aclMplsLabel1Exp Integer32, aclMplsLabel1Ttl Integer32, aclMplsLabel2Value Integer32, aclMplsLabel2Wild OCTET STRING, aclMplsLabel2Exp Integer32, aclMplsLabel2Ttl Integer32, aclMplsLabel3Value Integer32, aclMplsLabel3Wild OCTET STRING, aclMplsLabel3Exp Integer32, aclMplsLabel3Ttl Integer32, aclMplsLabel4Value Integer32, aclMplsLabel4Wild OCTET STRING, aclMplsLabel4Exp Integer32, aclMplsLabel4Ttl Integer32, aclMplsLabelSkBottom TruthValue, aclMplsLabelTimeRangeName OCTET STRING, aclMplsLabelRowStatus RowStatus } aclMplsLabelGroupIndex OBJECT-TYPE SYNTAX Integer32 (60001..80000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of MplsLabel acl group. Range 60001~80000." ::= { aclMplsLabelRuleEntry 1 } aclMplsLabelRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of MplsLabel acl rule.Range 1~131071." ::= { aclMplsLabelRuleEntry 2 } aclMplsLabelAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of MplsLabel acl rule. (1) permit. (2) deny." ::= { aclMplsLabelRuleEntry 3 } aclMplsLabelLayer OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The layer number of MPLS labels.Range is <1-4>. Set 1 means match MPLS packets with more than (or equal to) one layer MPLS label. Set 2 means match MPLS packets with more than (or equal to) two layer MPLS label. Set 3 means match MPLS packets with more than (or equal to) three layer MPLS label. Set 4 means match MPLS packets with more than (or equal to) four layer MPLS label." ::= { aclMplsLabelRuleEntry 4 } aclMplsLabel1Value OBJECT-TYPE SYNTAX Integer32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The mpls label1 value in in decimal system. Range is 0~1048575.Default value is 0." ::= { aclMplsLabelRuleEntry 5 } aclMplsLabel1Wild OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..5)) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS label wildcard in hexadecimal system. Range is string 0~fffff. Default wild value is fffff, means any." ::= { aclMplsLabelRuleEntry 6 } aclMplsLabel1Exp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The exp value of the MPLS label.Range of exp is <0-7>. 8 means do not use.Default value is 8." ::= { aclMplsLabelRuleEntry 7 } aclMplsLabel1Ttl OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The ttl value of the MPLS label.Range of ttl is <0-255>. 256 means do not use.Default value is 256." ::= { aclMplsLabelRuleEntry 8 } aclMplsLabel2Value OBJECT-TYPE SYNTAX Integer32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The mpls label value in in decimal system. Range is 0~1048575.Default value is 0." ::= { aclMplsLabelRuleEntry 9 } aclMplsLabel2Wild OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..5)) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS label wildcard in hexadecimal system. Range is string 0~fffff. Defalut wild value is fffff, means any." ::= { aclMplsLabelRuleEntry 10 } aclMplsLabel2Exp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The exp value of the MPLS label.Range of exp is <0-7>. 8 means do not use.Default value is 8." ::= { aclMplsLabelRuleEntry 11 } aclMplsLabel2Ttl OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The ttl value of the MPLS label.Range of ttl is <0-255>. 256 means do not use.Default value is 256." ::= { aclMplsLabelRuleEntry 12 } aclMplsLabel3Value OBJECT-TYPE SYNTAX Integer32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The mpls label value in in decimal system. Range is 0~1048575.Default value is 0." ::= { aclMplsLabelRuleEntry 13 } aclMplsLabel3Wild OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..5)) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS label wildcard in hexadecimal system. Range is string 0~fffff. Default wild value is fffff, means any." ::= { aclMplsLabelRuleEntry 14 } aclMplsLabel3Exp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The exp value of the MPLS label.Range of exp is <0-7>. 8 means do not use.Default value is 8." ::= { aclMplsLabelRuleEntry 15 } aclMplsLabel3Ttl OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The ttl value of the MPLS label.Range of ttl is <0-255>. 256 means do not use.Default value is 256." ::= { aclMplsLabelRuleEntry 16 } aclMplsLabel4Value OBJECT-TYPE SYNTAX Integer32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The mpls label value in in decimal system. Range is 0~1048575.Default value is 0." ::= { aclMplsLabelRuleEntry 17 } aclMplsLabel4Wild OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..5)) MAX-ACCESS read-create STATUS current DESCRIPTION "MPLS label wildcard in hexadecimal system. Range is string 0~fffff. Default wild value is fffff, means any." ::= { aclMplsLabelRuleEntry 18 } aclMplsLabel4Exp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The exp value of the MPLS label.Range of exp is <0-7>. 8 means do not use.Default value is 8." ::= { aclMplsLabelRuleEntry 19 } aclMplsLabel4Ttl OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The ttl value of the MPLS label.Range of ttl is <0-255>. 256 means do not use.Default value is 256." ::= { aclMplsLabelRuleEntry 20 } aclMplsLabelSkBottom OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set whether the topmost label as bottom of label stack. True(1), means matching MPLS packets with label layer num equal to aclMplsLabelLayer. False(2), means matching MPLS packets with label layer num more than aclMplsLabelLayer. Default value is False." ::= { aclMplsLabelRuleEntry 21 } aclMplsLabelTimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of used by the MPLS filter rule." ::= { aclMplsLabelRuleEntry 22 } aclMplsLabelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { aclMplsLabelRuleEntry 25 } -- -- aclIpv6RuleTable -- aclIpv6RuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclIpv6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for ipv6 acl group." ::= { aclData 10 } aclIpv6RuleEntry OBJECT-TYPE SYNTAX AclIpv6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclIpv6RuleTable." INDEX { aclIpv6GroupIndex, aclIpv6RuleIndex } ::= { aclIpv6RuleTable 1 } AclIpv6RuleEntry ::= SEQUENCE { aclIpv6GroupIndex Integer32, aclIpv6RuleIndex Integer32, aclIpv6Act RuleAction, aclIpv6Protocol Integer32, aclIpv6SrcIpv6 OCTET STRING, aclIpv6SrcPrefixLen Integer32, aclIpv6DestIpv6 OCTET STRING, aclIpv6DestPrefixLen Integer32, aclIpv6FlowLabel Integer32, aclIpv6Dscp DSCPValue, aclIpv6Fragments TruthValue, aclIpv6Routed TruthValue, aclIpv6Options TruthValue, aclIpv6TimeRangeName OCTET STRING, aclIpv6RowStatus RowStatus } aclIpv6GroupIndex OBJECT-TYPE SYNTAX Integer32 (40001..60000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of ipv6 acl group. Range 40001~60000." ::= { aclIpv6RuleEntry 1 } aclIpv6RuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of ipv6 acl rule.Range 1~131071." ::= { aclIpv6RuleEntry 2 } aclIpv6Act OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of ipv6 acl rule. (1) permit. (2) deny." ::= { aclIpv6RuleEntry 3 } aclIpv6Protocol OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol-type of Ipv6 acl group. <0-255> Protocol number Icmpv6 Internet Control Message Protocol(58) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) nouse Do not use this filter(256)" ::= { aclIpv6RuleEntry 4 } aclIpv6SrcIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address of ipv6 acl group." ::= { aclIpv6RuleEntry 5 } aclIpv6SrcPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address prefix length of ipv6 acl group.Range 0~128" ::= { aclIpv6RuleEntry 6 } aclIpv6DestIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address of ipv6 acl group." ::= { aclIpv6RuleEntry 7 } aclIpv6DestPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address prefix length of ipv6 acl group.Range 0~128" ::= { aclIpv6RuleEntry 8 } aclIpv6FlowLabel OBJECT-TYPE SYNTAX Integer32 (0..1048576) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576." ::= { aclIpv6RuleEntry 9 } aclIpv6Dscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter.Range 0~64." ::= { aclIpv6RuleEntry 10 } aclIpv6Fragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2)." ::= { aclIpv6RuleEntry 11 } aclIpv6Routed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclIpv6RuleEntry 12 } aclIpv6Options OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The flag of matching packet with ipv6 option. True(1),False(2)." ::= { aclIpv6RuleEntry 13 } aclIpv6TimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of Ipv6 acl rule.String length range 0~20." ::= { aclIpv6RuleEntry 14 } aclIpv6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { aclIpv6RuleEntry 16 } -- -- aclTcp6RuleTable -- aclTcp6RuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclTcp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for tcp6 acl group." ::= { aclData 11 } aclTcp6RuleEntry OBJECT-TYPE SYNTAX AclTcp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclTcp6RuleTable." INDEX { aclTcp6GroupIndex, aclTcp6RuleIndex } ::= { aclTcp6RuleTable 1 } AclTcp6RuleEntry ::= SEQUENCE { aclTcp6GroupIndex Integer32, aclTcp6RuleIndex Integer32, aclTcp6Act RuleAction, aclTcp6SrcIpv6 OCTET STRING, aclTcp6SrcPrefixLen Integer32, aclTcp6DestIpv6 OCTET STRING, aclTcp6DestPrefixLen Integer32, aclTcp6FlowLabel Integer32, aclTcp6Dscp DSCPValue, aclTcp6Fragments TruthValue, aclTcp6Routed TruthValue, aclTcp6Options TruthValue, aclTcp6SrcOp PortOp, aclTcp6SrcPort1 Integer32, aclTcp6SrcPort2 Integer32, aclTcp6DestOp PortOp, aclTcp6DestPort1 Integer32, aclTcp6DestPort2 Integer32, aclTcp6FlagOp INTEGER, aclTcp6FlagUrg TruthValue, aclTcp6FlagAck TruthValue, aclTcp6FlagPsh TruthValue, aclTcp6FlagRst TruthValue, aclTcp6FlagSyn TruthValue, aclTcp6FlagFin TruthValue, aclTcp6TimeRangeName OCTET STRING, aclTcp6RowStatus RowStatus } aclTcp6GroupIndex OBJECT-TYPE SYNTAX Integer32 (40001..60000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of tcp6 acl group. Range 40001~60000." ::= { aclTcp6RuleEntry 1 } aclTcp6RuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of tcp6 acl group. Range 1~131071." ::= { aclTcp6RuleEntry 2 } aclTcp6Act OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of tcp6 acl rule. (1) permit. (2) deny." ::= { aclTcp6RuleEntry 3 } aclTcp6SrcIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address of tcp6 acl group." ::= { aclTcp6RuleEntry 4 } aclTcp6SrcPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address prefix length of tcp6 acl group.Range 0~128" ::= { aclTcp6RuleEntry 5 } aclTcp6DestIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address of tcp6 acl group." ::= { aclTcp6RuleEntry 6 } aclTcp6DestPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address prefix length of tcp6 acl group.Range 0~128" ::= { aclTcp6RuleEntry 7 } aclTcp6FlowLabel OBJECT-TYPE SYNTAX Integer32 (0..1048576) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576." ::= { aclTcp6RuleEntry 8 } aclTcp6Dscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter.Range 0~64." ::= { aclTcp6RuleEntry 9 } aclTcp6Fragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2). This node can not be setted true for aclTcp6SrcOp or aclTcp6DestOp is setted." ::= { aclTcp6RuleEntry 10 } aclTcp6Routed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclTcp6RuleEntry 11 } aclTcp6Options OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The flag of matching packet with ipv6 option. True(1),False(2)." ::= { aclTcp6RuleEntry 12 } aclTcp6SrcOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The source port's operator of tcp6 acl group. This node can not be setted if aclTcp6Fragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclTcp6RuleEntry 13 } aclTcp6SrcPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port1. Range 0~65535. " ::= { aclTcp6RuleEntry 14 } aclTcp6SrcPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port2. Range 0~65535." ::= { aclTcp6RuleEntry 15 } aclTcp6DestOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port's operator of tcp6 acl group. This node can not be setted if aclTcp6Fragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclTcp6RuleEntry 16 } aclTcp6DestPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port1. Range 0~65535." ::= { aclTcp6RuleEntry 17 } aclTcp6DestPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port2. Range 0~65535." ::= { aclTcp6RuleEntry 18 } aclTcp6FlagOp OBJECT-TYPE SYNTAX INTEGER { matchAny(0), matchAll(1), invalid(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-flags' operator of tcp6 acl group. for example, established tcp packet with ack or rst flag setted, set this node matchAny(0) and set aclTcp6FlagAck and aclTcp6FlagRst can filter established tcp packet. matchAny(0), matchAll(1), invalid(2)." ::= { aclTcp6RuleEntry 19 } aclTcp6FlagUrg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-urg flag of tcp6 acl group. True(1),False(2). TCP protocol URG Packet." ::= { aclTcp6RuleEntry 20 } aclTcp6FlagAck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-ack flag of tcp6 acl group. TCP protocol ACK Packet. True(1),False(2)." ::= { aclTcp6RuleEntry 21 } aclTcp6FlagPsh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-psh flag of tcp6 acl group. True(1),False(2). TCP protocol PSH Packet." ::= { aclTcp6RuleEntry 22 } aclTcp6FlagRst OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-rst flag of tcp6 acl group. True(1),False(2). TCP protocol RST Packet." ::= { aclTcp6RuleEntry 23 } aclTcp6FlagSyn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-syn flag of tcp6 acl group. True(1),False(2). TCP protocol SYN Packet." ::= { aclTcp6RuleEntry 24 } aclTcp6FlagFin OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The tcp-fin flag of tcp6 acl group. True(1),False(2). TCP protocol FIN Packet." ::= { aclTcp6RuleEntry 25 } aclTcp6TimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of tcp6 acl rule." ::= { aclTcp6RuleEntry 26 } aclTcp6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { aclTcp6RuleEntry 28 } -- -- aclUdp6RuleTable -- aclUdp6RuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclUdp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for udp6 acl group." ::= { aclData 12 } aclUdp6RuleEntry OBJECT-TYPE SYNTAX AclUdp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclUdp6RuleTable." INDEX { aclUdp6GroupIndex, aclUdp6RuleIndex } ::= { aclUdp6RuleTable 1 } AclUdp6RuleEntry ::= SEQUENCE { aclUdp6GroupIndex Integer32, aclUdp6RuleIndex Integer32, aclUdp6Act RuleAction, aclUdp6SrcIpv6 OCTET STRING, aclUdp6SrcPrefixLen Integer32, aclUdp6DestIpv6 OCTET STRING, aclUdp6DestPrefixLen Integer32, aclUdp6FlowLabel Integer32, aclUdp6Dscp DSCPValue, aclUdp6Fragments TruthValue, aclUdp6Routed TruthValue, aclUdp6Options TruthValue, aclUdp6SrcOp PortOp, aclUdp6SrcPort1 Integer32, aclUdp6SrcPort2 Integer32, aclUdp6DestOp PortOp, aclUdp6DestPort1 Integer32, aclUdp6DestPort2 Integer32, aclUdp6TimeRangeName OCTET STRING, aclUdp6RowStatus RowStatus } aclUdp6GroupIndex OBJECT-TYPE SYNTAX Integer32 (40001..60000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of udp6 acl group. Range 40001~60000." ::= { aclUdp6RuleEntry 1 } aclUdp6RuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of udp6 acl group. Range 1~131071." ::= { aclUdp6RuleEntry 2 } aclUdp6Act OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of udp6 acl rule. (1) permit. (2) deny" ::= { aclUdp6RuleEntry 3 } aclUdp6SrcIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address of udp6 acl group." ::= { aclUdp6RuleEntry 4 } aclUdp6SrcPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address prefix length of udp6 acl group.Range 0~128" ::= { aclUdp6RuleEntry 5 } aclUdp6DestIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address of udp6 acl group." ::= { aclUdp6RuleEntry 6 } aclUdp6DestPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address prefix length of udp6 acl group.Range 0~128" ::= { aclUdp6RuleEntry 7 } aclUdp6FlowLabel OBJECT-TYPE SYNTAX Integer32 (0..1048576) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576." ::= { aclUdp6RuleEntry 8 } aclUdp6Dscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter.Range 0~64." ::= { aclUdp6RuleEntry 9 } aclUdp6Fragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. True(1),False(2). This node can not be setted true for aclUdp6SrcOp or aclUdp6DestOp is setted." ::= { aclUdp6RuleEntry 10 } aclUdp6Routed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclUdp6RuleEntry 11 } aclUdp6Options OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The flag of matching packet with ipv6 option. True(1),False(2)." ::= { aclUdp6RuleEntry 12 } aclUdp6SrcOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The source port's operator of udp6 acl group. This node can not be setted if aclUdp6Fragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclUdp6RuleEntry 13 } aclUdp6SrcPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port1. Range 0~65535." ::= { aclUdp6RuleEntry 14 } aclUdp6SrcPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer source port2. Range 0~65535." ::= { aclUdp6RuleEntry 15 } aclUdp6DestOp OBJECT-TYPE SYNTAX PortOp MAX-ACCESS read-create STATUS current DESCRIPTION "The destination port's operator of udp6 acl group. This node can not be setted if aclUdp6Fragments is true. eq(0), gt(2), lt(3), range(4), invalid(5)" ::= { aclUdp6RuleEntry 16 } aclUdp6DestPort1 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port1. Range 0~65535." ::= { aclUdp6RuleEntry 17 } aclUdp6DestPort2 OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth layer destination port2. Range 0~65535." ::= { aclUdp6RuleEntry 18 } aclUdp6TimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of udp6 acl rule. Range 0~20." ::= { aclUdp6RuleEntry 19 } aclUdp6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { aclUdp6RuleEntry 21 } -- -- aclIcmp6RuleTable -- aclIcmp6RuleTable OBJECT-TYPE SYNTAX SEQUENCE OF AclIcmp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the rule for icmp6 acl group." ::= { aclData 13 } aclIcmp6RuleEntry OBJECT-TYPE SYNTAX AclIcmp6RuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of aclIcmp6RuleTable." INDEX { aclIcmp6GroupIndex, aclIcmp6RuleIndex } ::= { aclIcmp6RuleTable 1 } AclIcmp6RuleEntry ::= SEQUENCE { aclIcmp6GroupIndex Integer32, aclIcmp6RuleIndex Integer32, aclIcmp6Act RuleAction, aclIcmp6SrcIpv6 OCTET STRING, aclIcmp6SrcPrefixLen Integer32, aclIcmp6DestIpv6 OCTET STRING, aclIcmp6DestPrefixLen Integer32, aclIcmp6FlowLabel Integer32, aclIcmp6Dscp DSCPValue, aclIcmp6Fragments TruthValue, aclIcmp6Routed TruthValue, aclIcmp6Options TruthValue, aclIcmp6Type Integer32, aclIcmp6Code Integer32, aclIcmp6TimeRangeName OCTET STRING, aclIcmp6RowStatus RowStatus } aclIcmp6GroupIndex OBJECT-TYPE SYNTAX Integer32 (40001..60000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of icmp6 acl group. Range 40001~60000." ::= { aclIcmp6RuleEntry 1 } aclIcmp6RuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of icmp6 acl group. Range 1~131071." ::= { aclIcmp6RuleEntry 2 } aclIcmp6Act OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of icmp6 acl rule. (1) permit. (2) deny" ::= { aclIcmp6RuleEntry 3 } aclIcmp6SrcIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-write STATUS current DESCRIPTION "Source IPv6-address of icmp6 acl group." ::= { aclIcmp6RuleEntry 4 } aclIcmp6SrcPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Source IPv6-address prefix length of icmp6 acl group.Range 0~128" ::= { aclIcmp6RuleEntry 5 } aclIcmp6DestIpv6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..46)) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address of icmp6 acl group." ::= { aclIcmp6RuleEntry 6 } aclIcmp6DestPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IPv6-address prefix length of icmp6 acl group.Range 0~128" ::= { aclIcmp6RuleEntry 7 } aclIcmp6FlowLabel OBJECT-TYPE SYNTAX Integer32 (0..1048576) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576." ::= { aclIcmp6RuleEntry 8 } aclIcmp6Dscp OBJECT-TYPE SYNTAX DSCPValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of DSCP.64 means do not use this filter.Range 0~64." ::= { aclIcmp6RuleEntry 9 } aclIcmp6Fragments OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching fragmented packet. This node can not be setted true if aclIcmp6Type is setted. True(1),False(2)." ::= { aclIcmp6RuleEntry 10 } aclIcmp6Routed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The flag of matching routed packet. True(1),False(2)." ::= { aclIcmp6RuleEntry 11 } aclIcmp6Options OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The flag of matching packet with ipv6 option. True(1),False(2)." ::= { aclIcmp6RuleEntry 12 } aclIcmp6Type OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of ICMPv6 packet.Range 0~256. This node can not be setted if aclIcmp6Fragments is true." ::= { aclIcmp6RuleEntry 13 } aclIcmp6Code OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The code of ICMPv6 packet.Range 0~256. This node can not be setted if aclIcmp6Type is not setted." ::= { aclIcmp6RuleEntry 14 } aclIcmp6TimeRangeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Time-range of icmp6 acl rule. Range 0~20." ::= { aclIcmp6RuleEntry 15 } aclIcmp6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { aclIcmp6RuleEntry 17 } globalQos OBJECT IDENTIFIER ::= { qos 1 } ifQos OBJECT IDENTIFIER ::= { qos 2 } cbQoS OBJECT IDENTIFIER ::= { qos 3 } srvQos OBJECT IDENTIFIER ::= { qos 4 } stats OBJECT IDENTIFIER ::= { qos 10 } -- --type definitions -- --ColorType ColorType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Color of the flow. " SYNTAX INTEGER { none(0), red(1), yellow(2), green(3) } --PriMapType PriMapType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of map." SYNTAX INTEGER { cos(1), dscp(2), exp(3), ipPre(4) } --IfQueueId IfQueueId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Queue Id" SYNTAX Integer32 (0..7) -- --end of type definitions -- -- -- Node definitions -- -- ifQosShapeObjects ifQosShapeObjects OBJECT IDENTIFIER ::= { ifQos 1 } -- ifQosShapeIfCfgTable -- ifQosShapeIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosShapeIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface shape." ::= { ifQosShapeObjects 1 } ifQosShapeIfCfgEntry OBJECT-TYPE SYNTAX IfQosShapeIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of interface shape talbe." INDEX { ifIndex } ::= { ifQosShapeIfCfgTable 1 } IfQosShapeIfCfgEntry ::= SEQUENCE { ifQosShapeIfCfgType INTEGER, ifQosShapeIfCfgPercent Integer32, ifQosShapeIfCfgRate Integer32, ifQosShapeIfCfgRowStatus RowStatus } ifQosShapeIfCfgType OBJECT-TYPE SYNTAX INTEGER {percent(1), rate(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Port shape mode type. 1 means port shape is based on percent of interface max bandwidth. 2 means port shape is based on the configured rate." ::= { ifQosShapeIfCfgEntry 1 } ifQosShapeIfCfgPercent OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "Percent value of interface max bandwidth. Range is <0-99>." ::= { ifQosShapeIfCfgEntry 2 } ifQosShapeIfCfgRate OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Rate of interface max value. Range <0-10000000>kbps." ::= { ifQosShapeIfCfgEntry 3 } ifQosShapeIfCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ifQosShapeIfCfgEntry 4 } -- ifQosShapeQueueCfgTable -- ifQosShapeQueueCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosShapeQueueCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface queue shape." ::= { ifQosShapeObjects 2 } ifQosShapeQueueCfgEntry OBJECT-TYPE SYNTAX IfQosShapeQueueCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of interface queue shape table." INDEX { ifIndex, ifQosShapeQueueCfgQueueId} ::= { ifQosShapeQueueCfgTable 1 } IfQosShapeQueueCfgEntry ::= SEQUENCE { ifQosShapeQueueCfgQueueId IfQueueId, ifQosShapeQueueCfgType INTEGER, ifQosShapeQueueCfgPercent Integer32, ifQosShapeQueueCfgPercentPeak Integer32, ifQosShapeQueueCfgRate Integer32, ifQosShapeQueueCfgRatePeak Integer32, ifQosShapeQueueCfgRowStatus RowStatus } ifQosShapeQueueCfgQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue Id of the interface. Range <0-7>" ::= { ifQosShapeQueueCfgEntry 1 } ifQosShapeQueueCfgType OBJECT-TYPE SYNTAX INTEGER {percent(1), rate(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Port shape mode type. 1 means queue shape is based on percent of interface max bandwidth. 2 means queue shape is based on the configured rate. If no shape is configured, zero will be got." ::= { ifQosShapeQueueCfgEntry 2 } ifQosShapeQueueCfgPercent OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Percent value of interface max bandwidth. Range is <0-100>. This value influences the commit information rate. This value should not be larger than ifQosShapeQueueCfgPercentPeak. If the queue shape is rate mode, this value is 0." ::= { ifQosShapeQueueCfgEntry 3 } ifQosShapeQueueCfgPercentPeak OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Percent value of interface max bandwidth. Range is <0-100>. This value influences the peak information rate. This value should not be smaller than ifQosShapeQueueCfgPercent. If the queue shape is rate mode, this value is 0." ::= { ifQosShapeQueueCfgEntry 4 } ifQosShapeQueueCfgRate OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit information rate of interface queue shaping. Range <0-10000000>kbps. This value should not be larger than ifQosShapeQueueCfgRatePeak. If the queue shape is percent mode, this value is 0." ::= { ifQosShapeQueueCfgEntry 5 } ifQosShapeQueueCfgRatePeak OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Peak information rate of interface queue shaping. Range <0-10000000>kbps. This value should not be smaller than ifQosShapeQueueCfgRate. If the queue shape is percent mode, this value is 0." ::= { ifQosShapeQueueCfgEntry 6 } ifQosShapeQueueCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ifQosShapeQueueCfgEntry 7 } -- ifQosQueueObjects ifQosQueueObjects OBJECT IDENTIFIER ::= { ifQos 2 } -- ifQosQueueClassDrrWeightTable -- ifQosQueueClassDrrWeightTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosQueueClassDrrWeightEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface queue class and Drr Weight ." ::= { ifQosQueueObjects 1 } ifQosQueueClassDrrWeightEntry OBJECT-TYPE SYNTAX IfQosQueueClassDrrWeightEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface queue class and Drr Weight entry." INDEX { ifIndex ,ifQosQueueClassDrrWeightQueueId} ::= { ifQosQueueClassDrrWeightTable 1 } IfQosQueueClassDrrWeightEntry ::= SEQUENCE { ifQosQueueClassDrrWeightQueueId IfQueueId, ifQosQueueClass Integer32, ifQosQueueDrrWeight Integer32 } ifQosQueueClassDrrWeightQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue Id.Range is <0-7>." ::= { ifQosQueueClassDrrWeightEntry 1 } ifQosQueueClass OBJECT-TYPE SYNTAX Integer32 (-1|0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "<0-6>:Class Id of the selected queue. Set -1 to return it to default value." ::= { ifQosQueueClassDrrWeightEntry 2 } ifQosQueueDrrWeight OBJECT-TYPE SYNTAX Integer32 (-1|1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "DRR weight of selected queue. <1-100>: DRR weight range. Set -1 to return it to default value." ::= { ifQosQueueClassDrrWeightEntry 3 } -- ifQosQueueManageCfgTable -- ifQosQueueManageCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosQueueManageCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface queue management." ::= { ifQosQueueObjects 3 } ifQosQueueManageCfgEntry OBJECT-TYPE SYNTAX IfQosQueueManageCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosQueueManageCfgTable." INDEX { ifIndex, ifQosQueueManageQueueId } ::= { ifQosQueueManageCfgTable 1 } IfQosQueueManageCfgEntry ::= SEQUENCE { ifQosQueueManageQueueId IfQueueId, ifQosQueueManageDropType Integer32, ifQosQueueManageThresholdPrecedence0 Integer32, ifQosQueueManageThresholdPrecedence1 Integer32, ifQosQueueManageThresholdPrecedence2 Integer32, ifQosQueueManageMinThresholdPre0 Integer32, ifQosQueueManageMinThresholdPre1 Integer32, ifQosQueueManageMinThresholdPre2 Integer32, ifQosQueueManageMaxThresholdPre0 Integer32, ifQosQueueManageMaxThresholdPre1 Integer32, ifQosQueueManageMaxThresholdPre2 Integer32, ifQosQueueManageDropProbabilityPre0 Integer32, ifQosQueueManageDropProbabilityPre1 Integer32, ifQosQueueManageDropProbabilityPre2 Integer32 } ifQosQueueManageQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue Id.Range is <0-7>" ::= { ifQosQueueManageCfgEntry 1 } ifQosQueueManageDropType OBJECT-TYPE SYNTAX Integer32(-1..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Queue management mode. (-1) taildrop. (0-10) the value of EWMA factor,default EWMA factor is 9. If this value is (0-10), the drop type is weighted random early drop(wred) mode." ::= { ifQosQueueManageCfgEntry 2 } ifQosQueueManageThresholdPrecedence0 OBJECT-TYPE SYNTAX Integer32 (-1..12884) MAX-ACCESS read-write STATUS current DESCRIPTION "Drop threshold for precedence0, only for taildrop mode. 65535 is returned for other mode.Range is <0-12884>. The set of this value will be ignored for non-taildrop mode. Set -1 to delete current configuration and retrieve default configuration. For 1G port, default value is 224; For 10G port, default value is 576" ::= { ifQosQueueManageCfgEntry 3 } ifQosQueueManageThresholdPrecedence1 OBJECT-TYPE SYNTAX Integer32 (-1|1..12885) MAX-ACCESS read-write STATUS current DESCRIPTION "Drop threshold for precedence1, only for taildrop mode. 65535 is returned for other mode.Range is <1-12885>. The set of this value will be ignored for non-taildrop mode. Set -1 to delete current configuration and retrieve default configuration. For 1G port, default value is 240; For 10G port, default value is 592." ::= { ifQosQueueManageCfgEntry 4 } ifQosQueueManageThresholdPrecedence2 OBJECT-TYPE SYNTAX Integer32 (-1|2..12886) MAX-ACCESS read-write STATUS current DESCRIPTION "Drop threshold for precedence1, only for taildrop mode. 65535 is returned for other mode. Range is <2-12886>. The set of this value will be ignored for non-taildrop mode. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 256; For 10G port, default value is 608." ::= { ifQosQueueManageCfgEntry 5 } ifQosQueueManageMinThresholdPre0 OBJECT-TYPE SYNTAX Integer32 (-1|0..12886) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence0 min threshold, only for wred mode. 65535 is returned for other mode. Range is <0-12886>. The set of this value will be ignored for non-wred mode. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 16;" ::= { ifQosQueueManageCfgEntry 6 } ifQosQueueManageMinThresholdPre1 OBJECT-TYPE SYNTAX Integer32 (-1|0..12886) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence1 min threshold, only for wred mode. 65535 is returned for other mode. Range is <0-12886>. The set of this value will be ignored for non-wred mode. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 24;" ::= { ifQosQueueManageCfgEntry 7 } ifQosQueueManageMinThresholdPre2 OBJECT-TYPE SYNTAX Integer32 (-1|0..12886) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence2 min threshold, only for wred mode. 65535 is returned for other mode. Range is <0-12886>.For 1G port, default value is 32; Set -1 to delete current configuration and retrieve default configuration." ::= { ifQosQueueManageCfgEntry 8 } ifQosQueueManageMaxThresholdPre0 OBJECT-TYPE SYNTAX Integer32 (-1|1..12887) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence0 max threshold, only for wred mode, 65535 is returned for other mode.Range is <1-12887>. The set of this value will be ignored for non-wred mode. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 480;" ::= { ifQosQueueManageCfgEntry 9 } ifQosQueueManageMaxThresholdPre1 OBJECT-TYPE SYNTAX Integer32 (-1|1..12887) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence1 max threshold, only for wred mode. The set of this value will be ignored for non-wred mode. 65535 is returned for other mode. Range is <1-12887>. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 496;" ::= { ifQosQueueManageCfgEntry 10 } ifQosQueueManageMaxThresholdPre2 OBJECT-TYPE SYNTAX Integer32 (-1|1..12887) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence2 max threshold, only for wred mode. The set of this value will be ignored for non-taildrop mode. 65535 is returned for other mode. Range is <1-12887>. Set -1 to delete current configuration and retrieve default configuration for all precedence. For 1G port, default value is 512;" ::= { ifQosQueueManageCfgEntry 11 } ifQosQueueManageDropProbabilityPre0 OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence0 drop probability, only for wred mode. Set -1 to delete current configuration and retrieve default configuration. The default value is 1024. -2 is returned for other mode. Range is <0-65535>." DEFVAL{ 1024 } ::= { ifQosQueueManageCfgEntry 12 } ifQosQueueManageDropProbabilityPre1 OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence1 drop probability, only for wred mode. Set -1 to delete current configuration and retrieve default configuration. The default value is 1024. -2 is returned for other mode. Range is <0-65535>." DEFVAL{ 1024 } ::= { ifQosQueueManageCfgEntry 13 } ifQosQueueManageDropProbabilityPre2 OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect drop precedence2 drop probability, only for wred mode. Set -1 to delete current configuration and retrieve default configuration. The default value is 1024. -2 is returned for other mode. Range is <0-65535>." DEFVAL{ 1024 } ::= { ifQosQueueManageCfgEntry 14 } --ifQosCarObjects ifQosCarObjects OBJECT IDENTIFIER ::= { ifQos 3 } --ifQosCarApplyTable ifQosCarApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosCarApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface CAR applied." ::= { ifQosCarObjects 1 } ifQosCarApplyEntry OBJECT-TYPE SYNTAX IfQosCarApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosCarApplyTable." INDEX { ifIndex, ifQosCarApplyDirection } ::= { ifQosCarApplyTable 1 } IfQosCarApplyEntry ::= SEQUENCE { ifQosCarApplyDirection INTEGER, ifQosCarApplyColorMode INTEGER, ifQosCarApplyCir Integer32, ifQosCarApplyCbs Integer32, ifQosCarApplyType INTEGER, ifQosCarApplyPir Integer32, ifQosCarApplyPbs Integer32, ifQosCarApplyDropColor ColorType, ifQosCarApplyUseL3Length INTEGER, ifQosCarApplyRowStatus RowStatus } ifQosCarApplyDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction of this port-policer applied on. (1) input. (2) output." ::= { ifQosCarApplyEntry 1 } ifQosCarApplyColorMode OBJECT-TYPE SYNTAX INTEGER { colorAware(1), colorBlind(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Value 1 for color aware mode policer, value 2 for color blind mode policer. " ::= { ifQosCarApplyEntry 2 } ifQosCarApplyCir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit information rate (kbps). Range is <8-10000000>." ::= { ifQosCarApplyEntry 3 } ifQosCarApplyCbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit burst size (bytes). Range is <1000-128000>." DEFVAL {128000} ::= { ifQosCarApplyEntry 4 } ifQosCarApplyType OBJECT-TYPE SYNTAX INTEGER { rfc2697(1), rfc2698(2), rfc4115(3), bwp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set (1) is select rfc2697 mode. Set (2) is select rfc2698 mode. Set (3) is select rfc4115 mode. Set (4) is select bwp mode." ::= { ifQosCarApplyEntry 5 } -- ifQosCarApplyEbs OBJECT-TYPE -- SYNTAX Integer32 (1000..128000) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Excess burst size (bytes). -- Range is <1000-128000>." -- DEFVAL {128000} -- ::= { ifQosCarApplyEntry 6 } ifQosCarApplyPir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "When Type mode is rcf2698 means Peak information rate (kbps). When Type mode is rfc2697&rfc4115&bwp means Excess Information Rate (kbps). Range is <8-10000000>." ::= { ifQosCarApplyEntry 7 } ifQosCarApplyPbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "When Type mode is rcf2698 means Peak burst size (bytes). When Type mode is rfc2697&rfc4115&bwp means Excess Burst Size (bytes). Range is <1000-128000>." DEFVAL {128000} ::= { ifQosCarApplyEntry 8 } ifQosCarApplyDropColor OBJECT-TYPE SYNTAX INTEGER { red(1), yellow(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Drop color configuration.When configuring 'red(1)', it only drops red packet; configuring 'yellow(2)', it drops both 'red' and 'yellow' packet. " DEFVAL {red} ::= { ifQosCarApplyEntry 9 } ifQosCarApplyUseL3Length OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "2 for using L2 frame length; 1 for using L3 length. " DEFVAL {no} ::= { ifQosCarApplyEntry 10 } ifQosCarApplyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ifQosCarApplyEntry 11 } -- ifQosPriObjects ifQosPriObjects OBJECT IDENTIFIER ::= { ifQos 4 } -- ifQosCosTable -- ifQosCosTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosCosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface cos value." ::= { ifQosPriObjects 1 } ifQosCosEntry OBJECT-TYPE SYNTAX IfQosCosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosCosTable." INDEX { ifIndex } ::= { ifQosCosTable 1 } IfQosCosEntry ::= SEQUENCE { ifQosCosValue Integer32 } ifQosCosValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Cos value for this interface.Range is <0-7>. The default CoS for each interface is 0. " ::= { ifQosCosEntry 1 } -- ifQosTrustTypeTable -- ifQosTrustTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosTrustTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface trust type." ::= { ifQosPriObjects 2 } ifQosTrustTypeEntry OBJECT-TYPE SYNTAX IfQosTrustTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosTrustTypeTable." INDEX { ifIndex } ::= { ifQosTrustTypeTable 1 } IfQosTrustTypeEntry ::= SEQUENCE { ifQosTrustTypeValue INTEGER } ifQosTrustTypeValue OBJECT-TYPE SYNTAX INTEGER { trustDefault(-1), trustPort(0), trustSTagCos(2), trustDscpExp(3), trustIpPre(4), trustCTagCos(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trust priority type for this interface. Set trust-default to delete current configuration and retrieve default configuration. trustDefault(-1) trustPort(0) trustSTagCos(2) trustDscpExp(3) trustIpPre(4) trustCTagCos(5) " ::= { ifQosTrustTypeEntry 1 } -- ifQosDomainTable -- ifQosDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface Domain value." ::= { ifQosPriObjects 3 } ifQosDomainEntry OBJECT-TYPE SYNTAX IfQosDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosDomainTable." INDEX { ifIndex } ::= { ifQosDomainTable 1 } IfQosDomainEntry ::= SEQUENCE { ifQosDomainValue Integer32 } ifQosDomainValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Domain value for this interface. Range <0-7>. The default value is 0" DEFVAL{0} ::= { ifQosDomainEntry 1 } -- ifQosReplacePriObjects ifQosReplacePriObjects OBJECT IDENTIFIER ::= { ifQos 5 } -- ifQosReplaceTable -- ifQosReplaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IfQosReplaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ifQosReplaceEntry." ::= { ifQosReplacePriObjects 1 } ifQosReplaceEntry OBJECT-TYPE SYNTAX IfQosReplaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of ifQosReplaceTable." INDEX { ifIndex } ::= { ifQosReplaceTable 1 } IfQosReplaceEntry ::= SEQUENCE { ifQosReplaceType INTEGER } ifQosReplaceType OBJECT-TYPE SYNTAX INTEGER { none(0), cos(1), cosctag(2), cosstag(3), dscpExp(4), ctagdscp(5), stagdscp(6), nodscp(7), nocos(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Replace priority type for this interface. The defult cos is stagcos; The value of set this node only can be follow: cos(1), cosctag(2), cosstag(3), dscpExp(4), nodscp(7), nocos(8)" DEFVAL {cos} ::= { ifQosReplaceEntry 1 } -- Sub Module: CBQOS -- -- Node definitions -- -- cbQoSClassifierObjects cbQoSClassifierObjects OBJECT IDENTIFIER ::= { cbQoS 1 } cbQoSClassifierIndexNext OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for cbQoSClassifierIndex when creating rows in the cbQoSClassifierCfgInfoTable. If the value of this node is less than 0, it indicates creating a Rowin cbQoSClassifierCfgInfoTable is not permitted. " ::= { cbQoSClassifierObjects 1 } -- cbQoSClassifierCfgInfoTable -- cbQoSClassifierCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSClassifierCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Classifier configuration information." ::= { cbQoSClassifierObjects 2 } cbQoSClassifierCfgInfoEntry OBJECT-TYPE SYNTAX CBQoSClassifierCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Classifier Configuration Information Entry." INDEX { cbQoSClassifierIndex } ::= { cbQoSClassifierCfgInfoTable 1 } CBQoSClassifierCfgInfoEntry ::= SEQUENCE { cbQoSClassifierIndex Integer32, cbQoSClassifierName OCTET STRING, cbQoSClassifierRuleCount Integer32, cbQoSClassifierOperator INTEGER, cbQoSClassifierMatchRuleNextIndex Integer32, cbQoSClassifierRowStatus RowStatus } cbQoSClassifierIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this class-map.Range is <10000-20000>." ::= { cbQoSClassifierCfgInfoEntry 1 } cbQoSClassifierName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of class-map. Only used in creating a conceptual row, can not modified in an 'active' Row " ::= { cbQoSClassifierCfgInfoEntry 2 } cbQoSClassifierRuleCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of match rules in class-map." ::= { cbQoSClassifierCfgInfoEntry 3 } cbQoSClassifierOperator OBJECT-TYPE SYNTAX INTEGER { and(1), or(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operator of the match rules of class-map. Default match operator is match-any. 'and(1)' for match-all rules. 'or(2)' for match-any rules. " DEFVAL {or} ::= { cbQoSClassifierCfgInfoEntry 4 } cbQoSClassifierMatchRuleNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for cbQoSMatchRuleIndex when creating rows in the cbQoSMatchRuleCfgInfoTable.Begin with 0. If the value of this node is less than 0, it indicates creating a Rowin cbQoSMatchRuleCfgInfoTable is not permitted. " ::= { cbQoSClassifierCfgInfoEntry 5 } cbQoSClassifierRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSClassifierCfgInfoEntry 6 } --cbQoSMatchRuleCfgInfoTable cbQoSMatchRuleCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSMatchRuleCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of match rule configuration in class-map. " ::= { cbQoSClassifierObjects 3 } cbQoSMatchRuleCfgInfoEntry OBJECT-TYPE SYNTAX CBQoSMatchRuleCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match Rule Entry in Class-map." INDEX { cbQoSClassifierIndex, cbQoSMatchRuleIndex } ::= { cbQoSMatchRuleCfgInfoTable 1 } CBQoSMatchRuleCfgInfoEntry ::= SEQUENCE { cbQoSMatchRuleIndex Integer32, cbQoSMatchRuleACLName OCTET STRING, cbQoSMatchRuleRowStatus RowStatus } cbQoSMatchRuleIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Match Rule. Currently only access-group(ACL) is used as matching rule. Range is <10000-20000>." ::= { cbQoSMatchRuleCfgInfoEntry 1 } cbQoSMatchRuleACLName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Match ACl name.Only used in creating a conceptual row, can not modified in an 'active' Row " ::= { cbQoSMatchRuleCfgInfoEntry 2 } cbQoSMatchRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSMatchRuleCfgInfoEntry 3 } -- match evc is not supported by humber currently. 2011-08-05 --cbQoSMatchEvcTable OBJECT-TYPE -- SYNTAX SEQUENCE OF CbQoSMatchEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The table of Match EVC is used to define EVC matching rule for a QoS class map. -- If CoS values are configured, CoS field in the packet from the EVC is inspected -- and only those matching the configured values are regarded as matching packets. -- Otherwise, CoS field is ignored and only EVC is considered in the matching rule." -- ::= { cbQoSClassifierObjects 4 } -- --cbQoSMatchEvcEntry OBJECT-TYPE -- SYNTAX CbQoSMatchEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "One item of match entry." -- INDEX { cbQoSMatchEvcClassMapIndex, cbQoSMatchEvcEvcIndex } -- ::= { cbQoSMatchEvcTable 1 } -- -- CbQoSMatchEvcEntry ::= -- SEQUENCE -- { -- cbQoSMatchEvcClassMapIndex -- Integer32, -- cbQoSMatchEvcEvcIndex -- Integer32, -- cbQoSMatchEvcAddCos -- OCTET STRING, -- cbQoSMatchEvcRowStatus -- RowStatus -- } -- --cbQoSMatchEvcClassMapIndex OBJECT-TYPE -- SYNTAX Integer32 (1..2048) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The index of Class-map." -- ::= { cbQoSMatchEvcEntry 1 } -- -- --cbQoSMatchEvcEvcIndex OBJECT-TYPE -- SYNTAX Integer32 (1..512) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The index of EVC entry." -- ::= { cbQoSMatchEvcEntry 2 } -- --cbQoSMatchEvcAddCos OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (1..15)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Add COS of Match EVC. The format is like 1,2,3." -- ::= { cbQoSMatchEvcEntry 3 } -- -- --cbQoSMatchEvcRowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo and -- Destroy and Active." -- ::= { cbQoSMatchEvcEntry 4 } -- -- cbQoSPolicyObjects -- cbQoSPolicyObjects OBJECT IDENTIFIER ::= { cbQoS 2 } cbQoSPolicyIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for cbQoSPolicyIndex when creating rows in the cbQoSPolicyCfgInfoTable. " ::= { cbQoSPolicyObjects 1 } -- cbQoSPolicyCfgInfoTable -- cbQoSPolicyCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSPolicyCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy-map." ::= { cbQoSPolicyObjects 2 } cbQoSPolicyCfgInfoEntry OBJECT-TYPE SYNTAX CBQoSPolicyCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy-map table Entry." INDEX {cbQoSPolicyIndex} ::= { cbQoSPolicyCfgInfoTable 1 } CBQoSPolicyCfgInfoEntry ::= SEQUENCE { cbQoSPolicyIndex Integer32, cbQoSPolicyName OCTET STRING, cbQoSPolicyClassCount Integer32, cbQoSPolicyClassNextIndex Integer32, cbQoSPolicyRowStatus RowStatus } cbQoSPolicyIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this policy-map.Range is <10000-20000>." ::= { cbQoSPolicyCfgInfoEntry 1 } cbQoSPolicyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of this policy-map. Only used in creating a conceptual row, can not modified in an 'active' Row " ::= { cbQoSPolicyCfgInfoEntry 2 } cbQoSPolicyClassCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of class-maps in this policy-map." ::= { cbQoSPolicyCfgInfoEntry 3 } cbQoSPolicyClassNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for cbQoSPolicyClassIndex when creating rows in the cbQoSPolicyClassCfgInfoTable. If the returned value is less 0, it indicates creating a Rowis not permitted." ::= { cbQoSPolicyCfgInfoEntry 4 } cbQoSPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSPolicyCfgInfoEntry 5 } -- cbQoSPolicyClassCfgInfoTable -- cbQoSPolicyClassCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSPolicyClassCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy-class." ::= { cbQoSPolicyObjects 3 } cbQoSPolicyClassCfgInfoEntry OBJECT-TYPE SYNTAX CBQoSPolicyClassCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy-class table Entry." INDEX {cbQoSPolicyClassIndex, cbQoSPolicyClassClassifierIndex} ::= { cbQoSPolicyClassCfgInfoTable 1 } CBQoSPolicyClassCfgInfoEntry ::= SEQUENCE { cbQoSPolicyClassIndex Integer32, cbQoSPolicyClassClassifierIndex Integer32, cbQoSPolicyClassClassifierName OCTET STRING, cbQoSPolicyClassRowStatus RowStatus } cbQoSPolicyClassIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this policy-class.Range is <10000-20000>." ::= { cbQoSPolicyClassCfgInfoEntry 1 } cbQoSPolicyClassClassifierIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of classifier applied by a policy. It is corresponding to cbQoSClassifierName. The maximum index value 20000 is reserved for class-map class-default only." ::= { cbQoSPolicyClassCfgInfoEntry 2 } cbQoSPolicyClassClassifierName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of classifier applied by a policy. It should exist in cbQoSClassifierCfgInfoTable. Only used in creating a conceptual row, can not modified in an 'active' row. " ::= { cbQoSPolicyClassCfgInfoEntry 3 } cbQoSPolicyClassRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSPolicyClassCfgInfoEntry 4 } -- cbQoSBehaviorObjects cbQoSBehaviorObjects OBJECT IDENTIFIER ::= { cbQoS 3 } cbQoSAggregativeCarIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for cbQoSAggregativeCarIndex when creating rows in the cbQoSAggregativeCarCfgInfoTable. " ::= { cbQoSBehaviorObjects 1 } -- cbQoSAggregativeCarCfgInfoTable -- cbQoSAggregativeCarCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSAggregativeCarCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aggregate-policer." ::= { cbQoSBehaviorObjects 2 } cbQoSAggregativeCarCfgInfoEntry OBJECT-TYPE SYNTAX CBQoSAggregativeCarCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate-policer table Entry." INDEX {cbQoSAggregativeCarIndex} ::= { cbQoSAggregativeCarCfgInfoTable 1 } CBQoSAggregativeCarCfgInfoEntry ::= SEQUENCE { cbQoSAggregativeCarIndex Integer32, cbQoSAggregativeCarName OCTET STRING, cbQoSAggregativeCarColorMode INTEGER, cbQoSAggregativeCarCir Integer32, cbQoSAggregativeCarCbs Integer32, cbQoSAggregativeCarType INTEGER, cbQoSAggregativeCarEbs Integer32, cbQoSAggregativeCarPir Integer32, cbQoSAggregativeCarPbs Integer32, cbQoSAggregativeCarDropColor ColorType, cbQoSAggregativeCarUseL3Length INTEGER, cbQoSAggregativeCarStats INTEGER, cbQoSAggregativeCarRowStatus RowStatus } cbQoSAggregativeCarIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of aggregate-policer.Range is <10000-20000>." ::= { cbQoSAggregativeCarCfgInfoEntry 1 } cbQoSAggregativeCarName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of aggregate-policer.Only used in creating a conceptual row, can not modified in an 'active' row. " ::= { cbQoSAggregativeCarCfgInfoEntry 2 } cbQoSAggregativeCarColorMode OBJECT-TYPE SYNTAX INTEGER { colorAware(1), colorBlind(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Value 1 for color aware mode policer; value 2 for color blind mode policer. Can modified in an 'active' row. " DEFVAL {colorBlind} ::= { cbQoSAggregativeCarCfgInfoEntry 3 } cbQoSAggregativeCarCir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit information rate (kbps).Range is <8-10000000>. Only used in creating a conceptual row, can not modified in an 'active' row. " ::= { cbQoSAggregativeCarCfgInfoEntry 4 } cbQoSAggregativeCarCbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit burst size (bytes).Range is <1000-128000>. Only used in creating a conceptual row, can not modified in an 'active' row." DEFVAL {128000} ::= { cbQoSAggregativeCarCfgInfoEntry 5 } cbQoSAggregativeCarType OBJECT-TYPE SYNTAX INTEGER { trtcm-mode(1), srtcm-mode(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set (1) is select TRTCM mode. Set (2) is select SRTCM mode." ::= { cbQoSAggregativeCarCfgInfoEntry 6 } cbQoSAggregativeCarEbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Excess burst size (bytes).Range is <1000-128000>. Only used in creating a conceptual row, can not modified in an 'active' row. If the cbQoSAggregativeCarPir is not zero, this value will be ignored. " DEFVAL {128000} ::= { cbQoSAggregativeCarCfgInfoEntry 7 } cbQoSAggregativeCarPir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Peak information rate (kbps).Range is <8-10000000>. Only used in creating a conceptual row, can not modified in an 'active' row. This valude should not be less than cbQoSAggregativeCarCir. " ::= { cbQoSAggregativeCarCfgInfoEntry 8} cbQoSAggregativeCarPbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Peak burst size (bytes).Range is <1000-128000>. Only used in creating a conceptual row, can not modified in an 'active' row. If the cbQoSAggregativeCarPir is zero, this value will be ignored; This valude should not be less than cbQoSAggregativeCarCbs. " DEFVAL {128000} ::= { cbQoSAggregativeCarCfgInfoEntry 9 } cbQoSAggregativeCarDropColor OBJECT-TYPE SYNTAX INTEGER { red(1), yellow(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Drop color configuration.When configuring 'red', it only drops red packet; configuring 'yellow', it drops both 'red' and 'yellow' packet. Only used in creating a conceptual row, can not modified in an 'active' row. " DEFVAL {red} ::= { cbQoSAggregativeCarCfgInfoEntry 10 } cbQoSAggregativeCarUseL3Length OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "2 for using L2 frame length; 1 for using L3 length. Only used in creating a conceptual row, can not modified in an 'active' row. " DEFVAL {no} ::= { cbQoSAggregativeCarCfgInfoEntry 11 } cbQoSAggregativeCarStats OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "2 policer stats is disable; 1 policer stats is enable. Only used in creating a conceptual row, can not modified in an 'active' row. " DEFVAL {no} ::= { cbQoSAggregativeCarCfgInfoEntry 12 } cbQoSAggregativeCarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSAggregativeCarCfgInfoEntry 13 } -- cbQoSBehaviorCarCfgInfoTable -- cbQoSBehaviorCarCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CbQoSBehaviorCarCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of behavior." ::= { cbQoSBehaviorObjects 3 } cbQoSBehaviorCarCfgInfoEntry OBJECT-TYPE SYNTAX CbQoSBehaviorCarCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Behavior table Entry." INDEX {cbQoSBehaviorCarPolicyIndex, cbQoSBehaviorCarPolicyClassIndex} ::= { cbQoSBehaviorCarCfgInfoTable 1 } CbQoSBehaviorCarCfgInfoEntry ::= SEQUENCE { cbQoSBehaviorCarPolicyIndex Integer32, cbQoSBehaviorCarPolicyClassIndex Integer32, cbQoSBehaviorCarColorMode INTEGER, cbQoSBehaviorCarCir Integer32, cbQoSBehaviorCarCbs Integer32, cbQoSBehaviorCarType INTEGER, cbQoSBehaviorCarPir Integer32, cbQoSBehaviorCarPbs Integer32, cbQoSBehaviorCarDropColor ColorType, cbQoSBehaviorCarUseL3Length INTEGER, cbQoSBehaviorCarStats INTEGER, cbQoSBehaviorCarRowStatus RowStatus } cbQoSBehaviorCarPolicyIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy-map. Range is <10000-20000>. Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry. " ::= { cbQoSBehaviorCarCfgInfoEntry 1 } cbQoSBehaviorCarPolicyClassIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy class-map. Range is <10000-20000>. Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry. " ::= { cbQoSBehaviorCarCfgInfoEntry 2 } cbQoSBehaviorCarColorMode OBJECT-TYPE SYNTAX INTEGER { colorAware(1), colorBlind(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Value 1 for color aware mode policer, value 2 for color blind mode policer. Only for policer behavior." ::= { cbQoSBehaviorCarCfgInfoEntry 5 } cbQoSBehaviorCarCir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit information rate (kbps).Range is <8-10000000>. Only for policer behavior. " ::= { cbQoSBehaviorCarCfgInfoEntry 6 } cbQoSBehaviorCarCbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Commit burst size (bytes).Range is <1000-128000>. Only for policer behavior. " DEFVAL {128000} ::= { cbQoSBehaviorCarCfgInfoEntry 7 } cbQoSBehaviorCarType OBJECT-TYPE SYNTAX INTEGER { rfc2697(1), rfc2698(2), rfc4115(3), bwp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set (1) is select rfc2697 mode. Set (2) is select rfc2698 mode. Set (3) is select rfc4115 mode. Set (4) is select bwp mode." ::= { cbQoSBehaviorCarCfgInfoEntry 8 } cbQoSBehaviorCarEbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Excess burst size (bytes).Range is <1000-128000>. Only for policer behavior. " DEFVAL {128000} ::= { cbQoSBehaviorCarCfgInfoEntry 9 } cbQoSBehaviorCarPir OBJECT-TYPE SYNTAX Integer32 (8..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Peak information rate (kbps).Range is <8-10000000>. Only for policer behavior. " ::= { cbQoSBehaviorCarCfgInfoEntry 10 } cbQoSBehaviorCarPbs OBJECT-TYPE SYNTAX Integer32 (1000..128000) MAX-ACCESS read-create STATUS current DESCRIPTION "Peak burst size (bytes).Range is <1000-128000>. Only for policer behavior. " DEFVAL {128000} ::= { cbQoSBehaviorCarCfgInfoEntry 11 } cbQoSBehaviorCarDropColor OBJECT-TYPE SYNTAX INTEGER { red(1), yellow(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Drop color configuration.Only 'red' and 'yellow' can be used here. When configuring 'red(1)', it only drops red packet; configuring 'yellow(2)', it drops both 'red' and 'yellow' packet. Only for policer behavior. When policy mode is aggregative policer, the result of DropColor will be none(0). " DEFVAL {red} ::= { cbQoSBehaviorCarCfgInfoEntry 12 } cbQoSBehaviorCarUseL3Length OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "2 for using L2 frame length; 1 for using L3 length. Only for policer behavior. " DEFVAL {no} ::= { cbQoSBehaviorCarCfgInfoEntry 13 } cbQoSBehaviorCarStats OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "2 policer stats is disable; 1 policer stats is enable. Only for policer behavior. " DEFVAL {no} ::= { cbQoSBehaviorCarCfgInfoEntry 14 } cbQoSBehaviorCarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSBehaviorCarCfgInfoEntry 15 } -- cbQoSBehaviorPriColorCfgInfoTable -- cbQoSBehaviorPriColorCfgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF CbQoSBehaviorPriColorCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of setting priority-color behavior." ::= { cbQoSBehaviorObjects 4 } cbQoSBehaviorPriColorCfgInfoEntry OBJECT-TYPE SYNTAX CbQoSBehaviorPriColorCfgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Setting priority-color table Entry." INDEX {cbQoSBehaviorPriColorPolicyIndex, cbQoSBehaviorPriColorPolicyClassIndex} ::= { cbQoSBehaviorPriColorCfgInfoTable 1 } CbQoSBehaviorPriColorCfgInfoEntry ::= SEQUENCE { cbQoSBehaviorPriColorPolicyIndex Integer32, cbQoSBehaviorPriColorPolicyClassIndex Integer32, cbQoSBehaviorPriColorSetPriority Integer32, cbQoSBehaviorPriColorSetColor ColorType } cbQoSBehaviorPriColorPolicyIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy-map. Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry. " ::= { cbQoSBehaviorPriColorCfgInfoEntry 1 } cbQoSBehaviorPriColorPolicyClassIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy class-map.Range is <10000-20000>. Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry. " ::= { cbQoSBehaviorPriColorCfgInfoEntry 2 } cbQoSBehaviorPriColorSetPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Internal priority value.Range id <0-63>. Default priority is 0." ::= { cbQoSBehaviorPriColorCfgInfoEntry 3 } cbQoSBehaviorPriColorSetColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS read-write STATUS current DESCRIPTION "Internal color. Set (1)red, (2)yellow, (3)green. Set (0) means no set priority." ::= { cbQoSBehaviorPriColorCfgInfoEntry 4 } -- cbQoSBehaviorOptionTable -- cbQoSBehaviorOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF CbQoSBehaviorOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of behavior." ::= { cbQoSBehaviorObjects 5 } cbQoSBehaviorOptionEntry OBJECT-TYPE SYNTAX CbQoSBehaviorOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ClassTrafficOption table Entry." INDEX {cbQoSBehaviorOptionPolicyIndex, cbQoSBehaviorOptionPolicyClassIndex} ::= { cbQoSBehaviorOptionTable 1 } CbQoSBehaviorOptionEntry ::= SEQUENCE { cbQoSBehaviorOptionPolicyIndex Integer32, cbQoSBehaviorOptionPolicyClassIndex Integer32, cbQoSBehaviorOptionTrust INTEGER, cbQoSBehaviorOptionStatsEn INTEGER, cbQoSBehaviorOptionRedirectIfindex Integer32, cbQoSBehaviorOptionMonitorSession Integer32 } cbQoSBehaviorOptionPolicyIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy-map.Range is <10000-20000>. Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry. " ::= { cbQoSBehaviorOptionEntry 1 } cbQoSBehaviorOptionPolicyClassIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy class-map.Range is <10000-20000>. Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry. " ::= { cbQoSBehaviorOptionEntry 2 } cbQoSBehaviorOptionTrust OBJECT-TYPE SYNTAX INTEGER { trustNone(-1), trustPort(0), trustCos(2), trustDscp(3), trustIpPre(4), trustCosCtag(5), trustCosStag(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use which prioritization type for this flow. trustNone(-1) trustPort(0) trustCos(2) trustDscp(3) trustIpPre(4) trustCosCtag(5) trustCosStag(6) " DEFVAL { trustNone } ::= { cbQoSBehaviorOptionEntry 3 } cbQoSBehaviorOptionStatsEn OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "1 for enable statistics for each ace in class map; 2 for disable statistics for each ace in class map. Default value is 2." DEFVAL { disable } ::= { cbQoSBehaviorOptionEntry 4 } cbQoSBehaviorOptionRedirectIfindex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "<1-65535>:Interface index of redirect. Set 0 means no redirect. " DEFVAL { 0 } ::= { cbQoSBehaviorOptionEntry 5 } cbQoSBehaviorOptionMonitorSession OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "<1-3> monitor session number; 0 no monitor, default value is 0." DEFVAL { 0 } ::= { cbQoSBehaviorOptionEntry 6 } -- cbQoSBehaviorCarAgpCfgTable -- cbQoSBehaviorCarAgpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CbQoSBehaviorCarAgpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of behavior." ::= { cbQoSBehaviorObjects 6 } cbQoSBehaviorCarAgpCfgEntry OBJECT-TYPE SYNTAX CbQoSBehaviorCarAgpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Behavior table Entry." INDEX {cbQoSBehaviorCarAgpPolicyIndex, cbQoSBehaviorCarAgpPolicyClassIndex} ::= { cbQoSBehaviorCarAgpCfgTable 1 } CbQoSBehaviorCarAgpCfgEntry ::= SEQUENCE { cbQoSBehaviorCarAgpPolicyIndex Integer32, cbQoSBehaviorCarAgpPolicyClassIndex Integer32, cbQoSBehaviorCarAgpCarName OCTET STRING, cbQoSBehaviorCarAgpRowStatus RowStatus } cbQoSBehaviorCarAgpPolicyIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy-map. Range is <10000-20000>. Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry. " ::= { cbQoSBehaviorCarAgpCfgEntry 1 } cbQoSBehaviorCarAgpPolicyClassIndex OBJECT-TYPE SYNTAX Integer32(10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of Policy class-map. Range is <10000-20000>. Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry. " ::= { cbQoSBehaviorCarAgpCfgEntry 2 } cbQoSBehaviorCarAgpCarName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Only for aggregative policer name. " ::= { cbQoSBehaviorCarAgpCfgEntry 3 } cbQoSBehaviorCarAgpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSBehaviorCarAgpCfgEntry 15 } -- cbQoSApplyPolicyObjects cbQoSApplyPolicyObjects OBJECT IDENTIFIER ::= { cbQoS 4 } -- cbQoSIfApplyPolicyTable -- cbQoSIfApplyPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF CBQoSIfApplyPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy applied on interface." ::= { cbQoSApplyPolicyObjects 1 } cbQoSIfApplyPolicyEntry OBJECT-TYPE SYNTAX CBQoSIfApplyPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy-applied table Entry." INDEX {cbQoSIfApplyPolicyIfIndex, cbQoSIfApplyPolicyDirection} ::= { cbQoSIfApplyPolicyTable 1 } CBQoSIfApplyPolicyEntry ::= SEQUENCE { cbQoSIfApplyPolicyIfIndex Integer32, cbQoSIfApplyPolicyDirection INTEGER, cbQoSIfApplyPolicyIndex Integer32, cbQoSIfApplyPolicyName OCTET STRING, cbQoSIfApplyPolicyRowStatus RowStatus } cbQoSIfApplyPolicyIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ifindex. The interface should only be physical, vlan, or linkagg interface. " ::= { cbQoSIfApplyPolicyEntry 1 } cbQoSIfApplyPolicyDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction of this service-policy applied on. 1. input direction. 2. output direction." ::= { cbQoSIfApplyPolicyEntry 2 } cbQoSIfApplyPolicyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of policy in cbQoSPolicyCfgInfoTable. It is corresponding to cbQoSIfApplyPolicyName." ::= { cbQoSIfApplyPolicyEntry 3 } cbQoSIfApplyPolicyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of policy applied. It should exist in cbQoSPolicyCfgInfoTable. Only used in creating a conceptual row, can not modified in an 'active' Row " ::= { cbQoSIfApplyPolicyEntry 4 } cbQoSIfApplyPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cbQoSIfApplyPolicyEntry 5 } -- Sub Module: GLOBALQOS globalQosEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable qos globally. enable(1),disable(2)." ::= { globalQos 1 } globalQosFlowFirst OBJECT-TYPE SYNTAX INTEGER { false(2), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set 'true(1)' for flow policer first, 'false(2)' for port policer first. Default value is false(2)." DEFVAL{false} ::= { globalQos 2 } globalQosResetMapObjects OBJECT IDENTIFIER ::= { globalQos 3 } globalQosResetDomainMapTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosResetDomainMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reset configuration of qos maping table in specified domain." ::= { globalQosResetMapObjects 1 } globalQosResetDomainMapEntry OBJECT-TYPE SYNTAX GlobalQosResetDomainMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosResetDomainMapTable." INDEX { globalQosResetDomainMapDomain } ::= { globalQosResetDomainMapTable 1 } GlobalQosResetDomainMapEntry ::= SEQUENCE { globalQosResetDomainMapDomain Integer32, globalQosResetDomainMapType INTEGER } globalQosResetDomainMapDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Qos domain.Range is <0-7>." ::= { globalQosResetDomainMapEntry 1 } globalQosResetDomainMapType OBJECT-TYPE SYNTAX INTEGER { cosPriColor(1), dscpPriColor(2), expPriColor(3), ipPrecPriColor(4), priColorCos(5), priColorDscp(6), priColorExp(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restore the whole running map table to system default table. Set the value to restore related table. cosPriColor(1) Restore the COS-to-Priority/Color map dscpPriColor(2) Restore dscp-priority-color map expPriColor(3) Restore the exp-to-priority/color map ipPrecPriColor(4) Restore the IP Precedence to Pri/Color map priColorCos(5) Restore PRI_COLOR-to-COS map priColorDscp(6) Restore PRI_COLOR-to-DSCP map priColorExp(7) Restore PRI_COLOR-to-EXP map The get of this value alway return 0" ::= { globalQosResetDomainMapEntry 2 } globalQosResetPriColorQidTid OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Set 1 to reset priority-color-queueId-thresholdId mapping. Zero will be returned. " ::= { globalQosResetMapObjects 2 } -- globalQosMapObjects globalQosMapObjects OBJECT IDENTIFIER ::= { globalQos 4 } -- globalQosMapIngressTable -- globalQosMapIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Running table of interface ingress map." ::= { globalQosMapObjects 1 } globalQosMapIngressEntry OBJECT-TYPE SYNTAX GlobalQosMapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapIngressTable." INDEX { globalQosMapIngressType, globalQosMapIngressDomain, globalQosMapIngressValue} ::= { globalQosMapIngressTable 1 } GlobalQosMapIngressEntry ::= SEQUENCE { globalQosMapIngressType PriMapType, globalQosMapIngressDomain Integer32, globalQosMapIngressValue Integer32, globalQosMapIngressToPriority Integer32, globalQosMapIngressToColor ColorType } globalQosMapIngressType OBJECT-TYPE SYNTAX PriMapType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of map. cos(1), dscp(2), exp(3), ipPre(4) " ::= { globalQosMapIngressEntry 1 } globalQosMapIngressDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress domain. Range is <0-7>." ::= { globalQosMapIngressEntry 2 } globalQosMapIngressValue OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Different type has different GlobalQosMapIngressValue. Type-name Range of GlobalQosMapIngressValue cos (0..7) dscp (0..63) ipPre (0..7) exp (0..7)" ::= { globalQosMapIngressEntry 3 } globalQosMapIngressToPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Internal priority value.Range is <0-63>." ::= { globalQosMapIngressEntry 4 } globalQosMapIngressToColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS read-write STATUS current DESCRIPTION "Internal color.Set (1)red, (2)yellow, (3)green." ::= { globalQosMapIngressEntry 5 } -- globalQosMapEgressTable -- globalQosMapEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Running table of interface egress map." ::= { globalQosMapObjects 2 } globalQosMapEgressEntry OBJECT-TYPE SYNTAX GlobalQosMapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapEgressTable" INDEX { globalQosMapEgressType, globalQosMapEgressDomain, globalQosMapEgressPriority, globalQosMapEgressColor} ::= { globalQosMapEgressTable 1 } GlobalQosMapEgressEntry ::= SEQUENCE { globalQosMapEgressType PriMapType, globalQosMapEgressDomain Integer32, globalQosMapEgressPriority Integer32, globalQosMapEgressColor ColorType, globalQosMapEgressValue Integer32 } globalQosMapEgressType OBJECT-TYPE SYNTAX PriMapType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the egress map-table. Only value cos(1), dscp(2), exp(3) can be use." ::= { globalQosMapEgressEntry 1 } globalQosMapEgressDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress domain.Range is <0-7>." ::= { globalQosMapEgressEntry 2 } globalQosMapEgressPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal priority value.Range is <0-63>." ::= { globalQosMapEgressEntry 3 } globalQosMapEgressColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal color. Set (1)red, (2)yellow, (3)green." ::= { globalQosMapEgressEntry 4 } globalQosMapEgressValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Different type has different GlobalQosMapIngressValue. Type-name Range of GlobalQosMapIngressValue cos (0..7) dscp (0..63) exp (0..7)" ::= { globalQosMapEgressEntry 5 } globalQosMapPriColorQidTidTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapPriColorQidTidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of qos map priority-color to QueueId - thresholdId." ::= { globalQosMapObjects 3 } globalQosMapPriColorQidTidEntry OBJECT-TYPE SYNTAX GlobalQosMapPriColorQidTidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapPriColorQidTidTable." INDEX { globalQosMapPriColorQidTidPriority, globalQosMapPriColorQidTidColor} ::= { globalQosMapPriColorQidTidTable 1 } GlobalQosMapPriColorQidTidEntry ::= SEQUENCE { globalQosMapPriColorQidTidPriority Integer32, globalQosMapPriColorQidTidColor ColorType, globalQosMapPriColorQidTidQueueId IfQueueId, globalQosMapPriColorQidTidThresholdId Integer32 } globalQosMapPriColorQidTidPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Map Priority to be configured.Range is <0-63>." ::= { globalQosMapPriColorQidTidEntry 1 } globalQosMapPriColorQidTidColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal color. Set (1)red, (2)yellow, (3)green." ::= { globalQosMapPriColorQidTidEntry 2 } globalQosMapPriColorQidTidQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS read-write STATUS current DESCRIPTION "The queue id to be mapped to.Range is <0-7>." ::= { globalQosMapPriColorQidTidEntry 3 } globalQosMapPriColorQidTidThresholdId OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The threasholdId id to be mapped to.Range is <0-3>." ::= { globalQosMapPriColorQidTidEntry 4 } -- globalQosMapIngressDefaultTable -- globalQosMapIngressDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapIngressDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface ingress map." ::= { globalQosMapObjects 4 } globalQosMapIngressDefaultEntry OBJECT-TYPE SYNTAX GlobalQosMapIngressDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapIngressDefaultTable." INDEX { globalQosMapIngressDefaultType, globalQosMapIngressDefaultDomain, globalQosMapIngressDefaultValue} ::= { globalQosMapIngressDefaultTable 1 } GlobalQosMapIngressDefaultEntry ::= SEQUENCE { globalQosMapIngressDefaultType PriMapType, globalQosMapIngressDefaultDomain Integer32, globalQosMapIngressDefaultValue Integer32, globalQosMapIngressDefaultToPriority Integer32, globalQosMapIngressDefaultToColor ColorType } globalQosMapIngressDefaultType OBJECT-TYPE SYNTAX PriMapType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of map. cos(1), dscp(2), exp(3), ipPre(4) " ::= { globalQosMapIngressDefaultEntry 1 } globalQosMapIngressDefaultDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress domain." ::= { globalQosMapIngressDefaultEntry 2 } globalQosMapIngressDefaultValue OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Different type has different GlobalQosMapIngressValue. Type-name Range of GlobalQosMapIngressValue cos (0..7) dscp (0..63) ipPre (0..7) exp (0..7)" ::= { globalQosMapIngressDefaultEntry 3 } globalQosMapIngressDefaultToPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal priority value." ::= { globalQosMapIngressDefaultEntry 4 } globalQosMapIngressDefaultToColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS read-only STATUS current DESCRIPTION "Internal color.Set (1)red, (2)yellow, (3)green." ::= { globalQosMapIngressDefaultEntry 5 } -- globalQosMapEgressDefaultTable -- globalQosMapEgressDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapEgressDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of interface egress map." ::= { globalQosMapObjects 5 } globalQosMapEgressDefaultEntry OBJECT-TYPE SYNTAX GlobalQosMapEgressDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapEgressDefaultTable." INDEX { globalQosMapEgressDefaultType, globalQosMapEgressDefaultDomain, globalQosMapEgressDefaultPriority, globalQosMapEgressDefaultColor} ::= { globalQosMapEgressDefaultTable 1 } GlobalQosMapEgressDefaultEntry ::= SEQUENCE { globalQosMapEgressDefaultType PriMapType, globalQosMapEgressDefaultDomain Integer32, globalQosMapEgressDefaultPriority Integer32, globalQosMapEgressDefaultColor ColorType, globalQosMapEgressDefaultValue Integer32 } globalQosMapEgressDefaultType OBJECT-TYPE SYNTAX PriMapType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the egress map-table. Only valude cos(1), dscp(2), exp(3) can be use." ::= { globalQosMapEgressDefaultEntry 1 } globalQosMapEgressDefaultDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress domain." ::= { globalQosMapEgressDefaultEntry 2 } globalQosMapEgressDefaultPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal priority value." ::= { globalQosMapEgressDefaultEntry 3 } globalQosMapEgressDefaultColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal color. Set (1)red, (2)yellow, (3)green." ::= { globalQosMapEgressDefaultEntry 4 } globalQosMapEgressDefaultValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Different type has different GlobalQosMapIngressValue. Type-name Range of GlobalQosMapIngressValue cos (0..7) dscp (0..63) exp (0..7)" ::= { globalQosMapEgressDefaultEntry 5 } globalQosMapPriColorQidTidDefaultTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosMapPriColorQidTidDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of default qos mapping configuration of priority-color to QueueId - thresholdId." ::= { globalQosMapObjects 6 } globalQosMapPriColorQidTidDefaultEntry OBJECT-TYPE SYNTAX GlobalQosMapPriColorQidTidDefaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosMapPriColorQidTidDefaultTable." INDEX { globalQosMapPriColorQidTidDefaultPriority, globalQosMapPriColorQidTidDefaultColor} ::= { globalQosMapPriColorQidTidDefaultTable 1 } GlobalQosMapPriColorQidTidDefaultEntry ::= SEQUENCE { globalQosMapPriColorQidTidDefaultPriority Integer32, globalQosMapPriColorQidTidDefaultColor ColorType, globalQosMapPriColorQidTidDefaultQueueId IfQueueId, globalQosMapPriColorQidTidDefaultThresholdId Integer32 } globalQosMapPriColorQidTidDefaultPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal priority." ::= { globalQosMapPriColorQidTidDefaultEntry 1 } globalQosMapPriColorQidTidDefaultColor OBJECT-TYPE SYNTAX ColorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal color. Set (1)red, (2)yellow, (3)green." ::= { globalQosMapPriColorQidTidDefaultEntry 2 } globalQosMapPriColorQidTidDefaultQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS read-only STATUS current DESCRIPTION "The queue id." ::= { globalQosMapPriColorQidTidDefaultEntry 3 } globalQosMapPriColorQidTidDefaultThresholdId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threasholdId id." ::= { globalQosMapPriColorQidTidDefaultEntry 4 } globalQosCfiTable OBJECT-TYPE SYNTAX SEQUENCE OF GlobalQosCfiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of qos domain cfi config." ::= { globalQos 5 } globalQosCfiEntry OBJECT-TYPE SYNTAX GlobalQosCfiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of globalQosCfiTable." INDEX { globalQosCfiDomain} ::= { globalQosCfiTable 1 } GlobalQosCfiEntry ::= SEQUENCE { globalQosCfiDomain Integer32, globalQosCfiEnable TruthValue } globalQosCfiDomain OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS domain to be configured. Range is <0~7>." ::= { globalQosCfiEntry 1 } globalQosCfiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Cfi enable status of qos domain. Set (1)enable, (2)disable. Default:(2)disable." ::= { globalQosCfiEntry 2 } -- Sub Module: STATS -- --type definitions -- --Direction DirectionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The direction of policy on at interface." SYNTAX INTEGER { inbound(1), outbound(2) } --Enable EnableType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The direction of policy on at interface." SYNTAX INTEGER { enabled(1), disabled(2) } --Clear value QosStatsClear ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "cleared: Reset the value of the rule's counter. nouse: 'nouse' will be returned when getting. " SYNTAX INTEGER { cleared(0), nouse(1) } -- --end of type definitions -- --srvQos definition srvQosSapIngressObjects OBJECT IDENTIFIER ::= { srvQos 1 } srvQosSapEgressObjects OBJECT IDENTIFIER ::= { srvQos 2 } srvQosFreeQueueInfoObjects OBJECT IDENTIFIER ::= { srvQos 3 } --sap ingress definition-- srvQosSapIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvQosSapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of qos sap ingress." ::= { srvQosSapIngressObjects 1 } srvQosSapIngressEntry OBJECT-TYPE SYNTAX SrvQosSapIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of qos sap ingress." INDEX {srvQosSapIngressName} ::= { srvQosSapIngressTable 1 } SrvQosSapIngressEntry ::= SEQUENCE { srvQosSapIngressName OCTET STRING, srvQosSapIngressRowStatus RowStatus, srvQosSapIngressDescription OCTET STRING, srvQosSapIngressApplyPolicyMap OCTET STRING } srvQosSapIngressName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the qos sap ingress." ::= { srvQosSapIngressEntry 1} srvQosSapIngressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the srvQosSapIngressEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { srvQosSapIngressEntry 2} srvQosSapIngressDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Descrption of the qos sap ingress." ::= { srvQosSapIngressEntry 3} srvQosSapIngressApplyPolicyMap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Policy map for the qos sap ingress." ::= { srvQosSapIngressEntry 4} --sap ingress policer definition-- srvQosSapIngressPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvQosSapIngressPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of qos sap ingress policer." ::= { srvQosSapIngressObjects 2} srvQosSapIngressPolicerEntry OBJECT-TYPE SYNTAX SrvQosSapIngressPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of qos sap ingress policer." INDEX {srvQosSapIngressName} ::= { srvQosSapIngressPolicerTable 1 } SrvQosSapIngressPolicerEntry ::= SEQUENCE { srvQosSapIngressPolicerMode INTEGER, srvQosSapIngressPolicerCir Integer32, srvQosSapIngressPolicerCbs Integer32, srvQosSapIngressPolicerEbs Integer32, srvQosSapIngressPolicerPir Integer32, srvQosSapIngressPolicerPbs Integer32, srvQosSapIngressPolicerDropColor INTEGER, srvQosSapIngressPolicerUseL3Length INTEGER } srvQosSapIngressPolicerMode OBJECT-TYPE SYNTAX INTEGER{ colorAware(0), colorBlind(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Policer mode of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 1} srvQosSapIngressPolicerCir OBJECT-TYPE SYNTAX Integer32(1..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Cir of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 2} srvQosSapIngressPolicerCbs OBJECT-TYPE SYNTAX Integer32(0..4000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Cbs of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 3} srvQosSapIngressPolicerEbs OBJECT-TYPE SYNTAX Integer32(0..4000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Ebs of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 4} srvQosSapIngressPolicerPir OBJECT-TYPE SYNTAX Integer32(1..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Pir of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 5} srvQosSapIngressPolicerPbs OBJECT-TYPE SYNTAX Integer32(0..4000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Pbs of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 6} srvQosSapIngressPolicerDropColor OBJECT-TYPE SYNTAX INTEGER{ none(0), red(1), yellow(2), green(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Drop color of the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 7} srvQosSapIngressPolicerUseL3Length OBJECT-TYPE SYNTAX INTEGER{ false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If L3 length is used for the qos sap ingress." ::= { srvQosSapIngressPolicerEntry 8} srvQosSapEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvQosSapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of qos sap Egress." ::= { srvQosSapEgressObjects 1 } --sap egress definition-- srvQosSapEgressEntry OBJECT-TYPE SYNTAX SrvQosSapEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of qos sap Egress." INDEX {srvQosSapEgressName} ::= { srvQosSapEgressTable 1 } SrvQosSapEgressEntry ::= SEQUENCE { srvQosSapEgressName OCTET STRING, srvQosSapEgressRowStatus RowStatus, srvQosSapEgressDescription OCTET STRING, srvQosSapEgressShapeAverage Integer32 } srvQosSapEgressName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the qos sap Egress." ::= { srvQosSapEgressEntry 1} srvQosSapEgressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the srvQosSapEgressEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { srvQosSapEgressEntry 2} srvQosSapEgressDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Descrption of the qos sap Egress." ::= { srvQosSapEgressEntry 3} srvQosSapEgressShapeAverage OBJECT-TYPE SYNTAX Integer32(0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Total Rate of the qos sap Egress." ::= { srvQosSapEgressEntry 4} --sap egress queue definition-- srvQosSapEgressQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvQosSapEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of qos sap egress queue." ::= { srvQosSapEgressObjects 2 } srvQosSapEgressQueueEntry OBJECT-TYPE SYNTAX SrvQosSapEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of qos sap egress queue." INDEX {srvQosSapEgressName, srvQosSapEgressQueueId} ::= { srvQosSapEgressQueueTable 1 } SrvQosSapEgressQueueEntry ::= SEQUENCE { srvQosSapEgressQueueId Integer32, srvQosSapEgressQueueShapeAverageRateCir Integer32, srvQosSapEgressQueueShapeAverageRatePir Integer32 } srvQosSapEgressQueueId OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of the qos sap Egress Queue." ::= { srvQosSapEgressQueueEntry 1} srvQosSapEgressQueueShapeAverageRateCir OBJECT-TYPE SYNTAX Integer32(0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Shape rate for commit information rate, kbps." ::= { srvQosSapEgressQueueEntry 2} srvQosSapEgressQueueShapeAverageRatePir OBJECT-TYPE SYNTAX Integer32(0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Shape rate for peak information rate, kbps." ::= { srvQosSapEgressQueueEntry 3} --sap egress queue info definition-- srvQosSapEgressQueueInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SrvQosSapEgressQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of qos sap egress queue info." ::= { srvQosSapEgressObjects 3 } srvQosSapEgressQueueInfoEntry OBJECT-TYPE SYNTAX SrvQosSapEgressQueueInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of qos sap egress queue info." INDEX {srvQosSapEgressName, srvQosSapEgressQueueId} ::= { srvQosSapEgressQueueInfoTable 1 } SrvQosSapEgressQueueInfoEntry ::= SEQUENCE { srvQosSapEgressQueueInfoRandomDetect Integer32, srvQosSapEgressQueueInfoTailDropThreshold0 Integer32, srvQosSapEgressQueueInfoTailDropThreshold1 Integer32, srvQosSapEgressQueueInfoTailDropThreshold2 Integer32, srvQosSapEgressQueueInfoTailDropThreshold3 Integer32, srvQosSapEgressQueueInfoRandomDetectMinThreshold0 Integer32, srvQosSapEgressQueueInfoRandomDetectMinThreshold1 Integer32, srvQosSapEgressQueueInfoRandomDetectMinThreshold2 Integer32, srvQosSapEgressQueueInfoRandomDetectMinThreshold3 Integer32, srvQosSapEgressQueueInfoRandomDetectMaxThreshold0 Integer32, srvQosSapEgressQueueInfoRandomDetectMaxThreshold1 Integer32, srvQosSapEgressQueueInfoRandomDetectMaxThreshold2 Integer32, srvQosSapEgressQueueInfoRandomDetectMaxThreshold3 Integer32, srvQosSapEgressQueueInfoRandomDetectDropProbability0 Integer32, srvQosSapEgressQueueInfoRandomDetectDropProbability1 Integer32, srvQosSapEgressQueueInfoRandomDetectDropProbability2 Integer32, srvQosSapEgressQueueInfoRandomDetectDropProbability3 Integer32 } srvQosSapEgressQueueInfoRandomDetect OBJECT-TYPE SYNTAX Integer32 (-1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "-1: Tail Drop 0-10: WRED Exponential-Weighted-Moving-Average (EWMA) factor." ::= { srvQosSapEgressQueueInfoEntry 1} srvQosSapEgressQueueInfoTailDropThreshold0 OBJECT-TYPE SYNTAX Integer32(0..24571) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail drop threshold0." ::= { srvQosSapEgressQueueInfoEntry 2} srvQosSapEgressQueueInfoTailDropThreshold1 OBJECT-TYPE SYNTAX Integer32(1..24572) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail drop threshold1, should greater than threshold0." ::= { srvQosSapEgressQueueInfoEntry 3} srvQosSapEgressQueueInfoTailDropThreshold2 OBJECT-TYPE SYNTAX Integer32(2..24573) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail drop threshold2, should greater than threshold1." ::= { srvQosSapEgressQueueInfoEntry 4} srvQosSapEgressQueueInfoTailDropThreshold3 OBJECT-TYPE SYNTAX Integer32(3..24574) MAX-ACCESS read-write STATUS current DESCRIPTION "Tail drop threshold3, should greater than threshold2." ::= { srvQosSapEgressQueueInfoEntry 5} srvQosSapEgressQueueInfoRandomDetectMinThreshold0 OBJECT-TYPE SYNTAX Integer32(0..24573) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold0's min threshold range." ::= { srvQosSapEgressQueueInfoEntry 6} srvQosSapEgressQueueInfoRandomDetectMinThreshold1 OBJECT-TYPE SYNTAX Integer32(0..24573) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold1's min threshold range." ::= { srvQosSapEgressQueueInfoEntry 7} srvQosSapEgressQueueInfoRandomDetectMinThreshold2 OBJECT-TYPE SYNTAX Integer32(0..24573) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold2's min threshold range." ::= { srvQosSapEgressQueueInfoEntry 8} srvQosSapEgressQueueInfoRandomDetectMinThreshold3 OBJECT-TYPE SYNTAX Integer32(0..24573) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold3's min threshold range." ::= { srvQosSapEgressQueueInfoEntry 9} srvQosSapEgressQueueInfoRandomDetectMaxThreshold0 OBJECT-TYPE SYNTAX Integer32(1..24574) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold0's max threshold range." ::= { srvQosSapEgressQueueInfoEntry 10} srvQosSapEgressQueueInfoRandomDetectMaxThreshold1 OBJECT-TYPE SYNTAX Integer32(1..24574) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold1's max threshold range." ::= { srvQosSapEgressQueueInfoEntry 11} srvQosSapEgressQueueInfoRandomDetectMaxThreshold2 OBJECT-TYPE SYNTAX Integer32(1..24574) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold2's max threshold range." ::= { srvQosSapEgressQueueInfoEntry 12} srvQosSapEgressQueueInfoRandomDetectMaxThreshold3 OBJECT-TYPE SYNTAX Integer32(1..24574) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold3's max threshold range." ::= { srvQosSapEgressQueueInfoEntry 13} srvQosSapEgressQueueInfoRandomDetectDropProbability0 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold0 drop probability range." ::= { srvQosSapEgressQueueInfoEntry 14} srvQosSapEgressQueueInfoRandomDetectDropProbability1 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold1 drop probability range." ::= { srvQosSapEgressQueueInfoEntry 15} srvQosSapEgressQueueInfoRandomDetectDropProbability2 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold2 drop probability range." ::= { srvQosSapEgressQueueInfoEntry 16} srvQosSapEgressQueueInfoRandomDetectDropProbability3 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Random-detect threshold3 drop probability range." ::= { srvQosSapEgressQueueInfoEntry 17} --"show qos free-queue-info" srvQosFreeQueueInfoServiceQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of queues allocated by each service." ::= { srvQosFreeQueueInfoObjects 1} srvQosFreeQueueInfoMaxSupportQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum support queue number." ::= { srvQosFreeQueueInfoObjects 2} srvQosFreeQueueInfoAllocatedQueueNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The allocated queue number." ::= { srvQosFreeQueueInfoObjects 3} srvQosFreeQueueInfoMaxSupportServiceNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum support service number." ::= { srvQosFreeQueueInfoObjects 4} srvQosFreeQueueInfoAllocatedServiceNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The allocated service number." ::= { srvQosFreeQueueInfoObjects 5} -- -- Node definitions -- -- Globle Stats enable qosStatsEnableObjects OBJECT IDENTIFIER ::= { stats 1 } qosStatsPolicyEnable OBJECT-TYPE SYNTAX EnableType MAX-ACCESS read-write STATUS current DESCRIPTION "The status of policer statistics. (1) enable. (2) disable." ::= { qosStatsEnableObjects 1 } qosStatsQueueEnable OBJECT-TYPE SYNTAX EnableType MAX-ACCESS read-write STATUS current DESCRIPTION "The status of queue statistics. (1) enable. (2) disable." ::= { qosStatsEnableObjects 2 } -- Globle Stats clear qosStatsClearStaticsObjects OBJECT IDENTIFIER ::= { stats 2 } -- Clear Policy QosStats qosStatsClearPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsClearPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of clearing Stats for Policy in a QoS policy applied on the interface." ::= { qosStatsClearStaticsObjects 1 } qosStatsClearPolicyEntry OBJECT-TYPE SYNTAX QosStatsClearPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Clear Stats information entry." INDEX {qosStatsClearPolicyIndex } ::= { qosStatsClearPolicyTable 1 } QosStatsClearPolicyEntry ::= SEQUENCE { qosStatsClearPolicyIndex Integer32, qosStatsClearPolicyPolicerStats QosStatsClear, qosStatsClearPolicyAceMatchStats QosStatsClear } qosStatsClearPolicyIndex OBJECT-TYPE SYNTAX Integer32 (10000..20000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy map entry index. Range 10000~20000." ::= { qosStatsClearPolicyEntry 1 } qosStatsClearPolicyPolicerStats OBJECT-TYPE SYNTAX QosStatsClear MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the value of the policer statistics in policy-map.Clear(0)." ::= { qosStatsClearPolicyEntry 2 } qosStatsClearPolicyAceMatchStats OBJECT-TYPE SYNTAX QosStatsClear MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the value of the ace-matching statistics in policy-map.Clear(0)." ::= { qosStatsClearPolicyEntry 3 } -- Clearing port-policy QosStats qosStatsClearPortPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsClearPortPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of clearing Stats for Policy in a QoS PortPolicy applied on the interface." ::= { qosStatsClearStaticsObjects 2 } qosStatsClearPortPolicyEntry OBJECT-TYPE SYNTAX QosStatsClearPortPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Clear Stats information entry." INDEX { qosStatsClearPortPolicyIfIndex, qosStatsClearPortPolicyDirection } ::= { qosStatsClearPortPolicyTable 1 } QosStatsClearPortPolicyEntry ::= SEQUENCE { qosStatsClearPortPolicyIfIndex Integer32, qosStatsClearPortPolicyDirection DirectionType, qosStatsClearPortPolicyStats QosStatsClear } qosStatsClearPortPolicyIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsClearPortPolicyEntry 1 } qosStatsClearPortPolicyDirection OBJECT-TYPE SYNTAX DirectionType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy direction: inbound (1) outbound (2)" ::= { qosStatsClearPortPolicyEntry 2 } qosStatsClearPortPolicyStats OBJECT-TYPE SYNTAX QosStatsClear MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the statistics of port policer.Clear(0)." ::= { qosStatsClearPortPolicyEntry 3 } -- Clear Agg policy QosStats qosStatsClearAggPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsClearAggPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of clearing Stats for Policy in a QoS AggPolicy applied on the interface." ::= { qosStatsClearStaticsObjects 3 } qosStatsClearAggPolicyEntry OBJECT-TYPE SYNTAX QosStatsClearAggPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Clear agg policer stats information entry." INDEX { qosStatsClearAggPolicyIndex } ::= { qosStatsClearAggPolicyTable 1 } QosStatsClearAggPolicyEntry ::= SEQUENCE { qosStatsClearAggPolicyIndex Integer32, qosStatsClearAggPolicyStats QosStatsClear } qosStatsClearAggPolicyIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of aggregate-policer." ::= { qosStatsClearAggPolicyEntry 1 } qosStatsClearAggPolicyStats OBJECT-TYPE SYNTAX QosStatsClear MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the value of the Stats.Clear(0)." ::= { qosStatsClearAggPolicyEntry 2 } -- Clear queue QosStats qosStatsClearQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsClearQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of clearing Stats for Policy in a QoS Queue applied on the interface." ::= { qosStatsClearStaticsObjects 4 } qosStatsClearQueueEntry OBJECT-TYPE SYNTAX QosStatsClearQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Clear Stats information entry." INDEX { qosStatsClearQueueifIndex, qosStatsClearQueueId} ::= { qosStatsClearQueueTable 1 } QosStatsClearQueueEntry ::= SEQUENCE { qosStatsClearQueueifIndex Integer32, qosStatsClearQueueId IfQueueId, qosStatsClearQueueStats QosStatsClear } qosStatsClearQueueifIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsClearQueueEntry 1 } qosStatsClearQueueId OBJECT-TYPE SYNTAX IfQueueId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface queue id." ::= { qosStatsClearQueueEntry 2 } qosStatsClearQueueStats OBJECT-TYPE SYNTAX QosStatsClear MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the value of the Stats.Clear(0)." ::= { qosStatsClearQueueEntry 3 } -- Running Stats information qosStatsRunStaticsObjects OBJECT IDENTIFIER ::= { stats 3 } -- Policy Stats,policy Running Stats information qosStatsCbPolicyRunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsCbPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Running Stats for Policy in a QoS policy applied on the interface." ::= { qosStatsRunStaticsObjects 1 } qosStatsCbPolicyRunInfoEntry OBJECT-TYPE SYNTAX QosStatsCbPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy Stats information entry." INDEX { qosStatsCbPolicyIfIndex, qosStatsCbPolicyDirection, qosStatsPolicyClassIndex } ::= { qosStatsCbPolicyRunInfoTable 1 } QosStatsCbPolicyRunInfoEntry ::= SEQUENCE { qosStatsCbPolicyIfIndex Integer32, qosStatsCbPolicyDirection DirectionType, qosStatsPolicyClassIndex Integer32, qosStatsPolicyGreenPackets Counter64, qosStatsPolicyGreenBytes Counter64, qosStatsPolicyRedPackets Counter64, qosStatsPolicyRedBytes Counter64, qosStatsPolicyYellowPackets Counter64, qosStatsPolicyYellowBytes Counter64, qosStatsPolicyClassBasedPkts Counter64, qosStatsPolicyClassBasedBytes Counter64 } qosStatsCbPolicyIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsCbPolicyRunInfoEntry 1 } qosStatsCbPolicyDirection OBJECT-TYPE SYNTAX DirectionType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy direction: inbound (1) outbound (2) " ::= { qosStatsCbPolicyRunInfoEntry 2 } qosStatsPolicyClassIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PolicyClass Index in a QoS policy." ::= { qosStatsCbPolicyRunInfoEntry 3 } qosStatsPolicyGreenPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green packets." ::= { qosStatsCbPolicyRunInfoEntry 4 } qosStatsPolicyGreenBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green bytes." ::= { qosStatsCbPolicyRunInfoEntry 5 } qosStatsPolicyRedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red packets." ::= { qosStatsCbPolicyRunInfoEntry 6 } qosStatsPolicyRedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red bytes." ::= { qosStatsCbPolicyRunInfoEntry 7 } qosStatsPolicyYellowPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of yellow packets." ::= { qosStatsCbPolicyRunInfoEntry 8 } qosStatsPolicyYellowBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of yellow bytes." ::= { qosStatsCbPolicyRunInfoEntry 9 } qosStatsPolicyClassBasedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of policy class matching packets." ::= { qosStatsCbPolicyRunInfoEntry 10 } qosStatsPolicyClassBasedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of policy class matching bytes." ::= { qosStatsCbPolicyRunInfoEntry 11 } -- Port policy: policy Running Stats information on port qosStatsPortPolicyRunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsPortPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Running Stats in a QoS policy applied on the port." ::= { qosStatsRunStaticsObjects 2 } qosStatsPortPolicyRunInfoEntry OBJECT-TYPE SYNTAX QosStatsPortPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy Stats information entry." INDEX { qosStatsCbPolicyIfIndex, qosStatsCbPolicyDirection } ::= { qosStatsPortPolicyRunInfoTable 1 } QosStatsPortPolicyRunInfoEntry ::= SEQUENCE { qosStatsPortPolicyIfIndex Integer32, qosStatsPortPolicyDirection DirectionType, qosStatsPortPolicyConfirmPackets Counter64, qosStatsPortPolicyConfirmBytes Counter64, qosStatsPortPolicyNoConfirmPackets Counter64, qosStatsPortPolicyNoConfirmBytes Counter64 } qosStatsPortPolicyIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsPortPolicyRunInfoEntry 1 } qosStatsPortPolicyDirection OBJECT-TYPE SYNTAX DirectionType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy direction: inbound (1) outbound (2) " ::= { qosStatsPortPolicyRunInfoEntry 2 } qosStatsPortPolicyConfirmPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green packets." ::= { qosStatsPortPolicyRunInfoEntry 3 } qosStatsPortPolicyConfirmBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green bytes." ::= { qosStatsPortPolicyRunInfoEntry 4 } qosStatsPortPolicyNoConfirmPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red packets." ::= { qosStatsPortPolicyRunInfoEntry 5 } qosStatsPortPolicyNoConfirmBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red bytes." ::= { qosStatsPortPolicyRunInfoEntry 6 } -- Queue Stats qosStatsIfQueueRunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsIfQueueRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Running Stats for queue in a QoS policy applied on the interface." ::= { qosStatsRunStaticsObjects 3 } qosStatsIfQueueRunInfoEntry OBJECT-TYPE SYNTAX QosStatsIfQueueRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue Stats entry." INDEX { qosStatsQueueIfIndex, qosStatsQueueID } ::= { qosStatsIfQueueRunInfoTable 1 } QosStatsIfQueueRunInfoEntry ::= SEQUENCE { qosStatsQueueIfIndex Integer32, qosStatsQueueID Integer32, qosStatsIfQueueTransmittedPackets Counter64, qosStatsIfQueueTransmittedBytes Counter64, qosStatsIfQueueDropPackets Counter64, qosStatsIfQueueDropBytes Counter64 } qosStatsQueueIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsIfQueueRunInfoEntry 1 } qosStatsQueueID OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue ID. Range <0-7>." ::= { qosStatsIfQueueRunInfoEntry 2 } qosStatsIfQueueTransmittedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets enqueued." ::= { qosStatsIfQueueRunInfoEntry 3 } qosStatsIfQueueTransmittedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes enqueued." ::= { qosStatsIfQueueRunInfoEntry 4 } qosStatsIfQueueDropPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of packets discarded when enqueued by tail-drop/wred method. It's zero if the system does not support queue drop statistics." ::= { qosStatsIfQueueRunInfoEntry 5 } qosStatsIfQueueDropBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Number of bytes discarded when enqueued by tail-drop/wred method. It's zero if the system does not support queue drop statistics." ::= { qosStatsIfQueueRunInfoEntry 6 } qosStatsCbPolicyAceBasedRunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsCbPolicyAceBasedRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Running Stats for matching QoS policy Ace applied on the interface. The matching ace statistics is only for match-any class-map in policy-map" ::= { qosStatsRunStaticsObjects 4 } qosStatsCbPolicyAceBasedRunInfoEntry OBJECT-TYPE SYNTAX QosStatsCbPolicyAceBasedRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy Stats information entry." INDEX { qosStatsCbAceBasedIfIndex, qosStatsCbAceBasedDirection, qosStatsCbAceBasedPolicyClassIndex, qosStatsCbAceBasedMatchRuleIndex, qosStatsCbAceBasedAclGroupRuleIndex } ::= { qosStatsCbPolicyAceBasedRunInfoTable 1 } QosStatsCbPolicyAceBasedRunInfoEntry ::= SEQUENCE { qosStatsCbAceBasedIfIndex Integer32, qosStatsCbAceBasedDirection DirectionType, qosStatsCbAceBasedPolicyClassIndex Integer32, qosStatsCbAceBasedMatchRuleIndex Integer32, qosStatsCbAceBasedAclGroupRuleIndex Integer32, qosStatsCbAceBasedPkts Counter64, qosStatsCbAceBasedBytes Counter64 } qosStatsCbAceBasedIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, equal to ifIndex." ::= { qosStatsCbPolicyAceBasedRunInfoEntry 1 } qosStatsCbAceBasedDirection OBJECT-TYPE SYNTAX DirectionType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy direction: inbound (1) outbound (2) " ::= { qosStatsCbPolicyAceBasedRunInfoEntry 2 } qosStatsCbAceBasedPolicyClassIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PolicyClass index in policy-map." ::= { qosStatsCbPolicyAceBasedRunInfoEntry 3 } qosStatsCbAceBasedMatchRuleIndex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match rule index in Class-map." ::= { qosStatsCbPolicyAceBasedRunInfoEntry 4 } qosStatsCbAceBasedAclGroupRuleIndex OBJECT-TYPE SYNTAX Integer32(1..2147483646) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rule index(sequence num in cli) in acl Group. " ::= { qosStatsCbPolicyAceBasedRunInfoEntry 5 } qosStatsCbAceBasedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets matching ace in policy-map." ::= { qosStatsCbPolicyAceBasedRunInfoEntry 6 } qosStatsCbAceBasedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes of packets matching ace in policy-map." ::= { qosStatsCbPolicyAceBasedRunInfoEntry 7 } -- Agg Policy Stats,policy Running Stats information qosStatsAggPolicyRunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF QosStatsAggPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Running Stats in a QoS aggregate policy applied on the interface." ::= { qosStatsRunStaticsObjects 5 } qosStatsAggPolicyRunInfoEntry OBJECT-TYPE SYNTAX QosStatsAggPolicyRunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aggregate Policy Stats information entry." INDEX { qosStatsAggPolicyIndex } ::= { qosStatsAggPolicyRunInfoTable 1 } QosStatsAggPolicyRunInfoEntry ::= SEQUENCE { qosStatsAggPolicyIndex Integer32, qosStatsAggPolicyRedPackets Counter64, qosStatsAggPolicyRedBytes Counter64, qosStatsAggPolicyGreenPackets Counter64, qosStatsAggPolicyGreenBytes Counter64, qosStatsAggPolicyYellowPackets Counter64, qosStatsAggPolicyYellowBytes Counter64 } qosStatsAggPolicyIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of aggregate-policer." ::= { qosStatsAggPolicyRunInfoEntry 1 } qosStatsAggPolicyRedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red packets." ::= { qosStatsAggPolicyRunInfoEntry 2 } qosStatsAggPolicyRedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of red bytes." ::= { qosStatsAggPolicyRunInfoEntry 3 } qosStatsAggPolicyGreenPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green packets." ::= { qosStatsAggPolicyRunInfoEntry 4 } qosStatsAggPolicyGreenBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of green bytes." ::= { qosStatsAggPolicyRunInfoEntry 5 } qosStatsAggPolicyYellowPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of yellow packets." ::= { qosStatsAggPolicyRunInfoEntry 6 } qosStatsAggPolicyYellowBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of yellow bytes." ::= { qosStatsAggPolicyRunInfoEntry 7 } -- Sub Module: IGSP EnabledStatus::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simpleStatus value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== lswIgmpsnoopingMibObject OBJECT IDENTIFIER ::= { igsp 1 } lswIgmpsnoopingTrap OBJECT IDENTIFIER ::= { igsp 2 } igmpSnoopingStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping. enable(1) disable(2)" ::= { lswIgmpsnoopingMibObject 1 } igmpSnoopingFastLeaveStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Fast Leave. enable(1) disable(2)" ::= { lswIgmpsnoopingMibObject 2 } igmpSnoopingVersion OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Version." ::= { lswIgmpsnoopingMibObject 3 } igmpSnoopingMaxMemberNumber OBJECT-TYPE SYNTAX INTEGER (1..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the max member number." ::= { lswIgmpsnoopingMibObject 4 } igmpSnoopingDiscardUnknownstatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Discard unknown multicast traffic. enable(1) disable(2)" ::= { lswIgmpsnoopingMibObject 5 } igmpSnoopingReportSuppressionStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Report-Suppression. enable(1) disable(2)" ::= { lswIgmpsnoopingMibObject 6 } igmpSnoopingLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER (1000..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Last Member Query Interval. Interval range 1000~25500." ::= { lswIgmpsnoopingMibObject 7 } igmpSnoopingQueryInterval OBJECT-TYPE SYNTAX INTEGER (2..18000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Query Interval.Must more than query max response time. Interval range 2~18000." ::= { lswIgmpsnoopingMibObject 8 } igmpSnoopingQueryMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Query Max Response Time.Time range 1~25." ::= { lswIgmpsnoopingMibObject 9 } igmpSnoopingVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpSnoopingVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains, one entry per vlan, infomation about the IGMP Snooping." ::= { lswIgmpsnoopingMibObject 10 } igmpSnoopingVlanEntry OBJECT-TYPE SYNTAX IgmpSnoopingVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the IGMP Snooping on vlan." INDEX { igmpSnoopingVlanID } ::= { igmpSnoopingVlanTable 1 } IgmpSnoopingVlanEntry ::= SEQUENCE { igmpSnoopingVlanID Integer32, igmpSnoopingVlanEnabled EnabledStatus, igmpSnoopingVlanFastLeaveStatus EnabledStatus, igmpSnoopingVlanReportSuppressionStatus EnabledStatus, igmpSnoopingVlanVersion INTEGER, igmpSnoopingVlanMaxMemberNumber INTEGER, igmpSnoopingVlanDiscardUnknownStatus EnabledStatus, igmpSnoopingVlanGroupAccesslist OCTET STRING, igmpSnoopingVlanLastMemberQueryInterval INTEGER, igmpSnoopingVlanQuerier EnabledStatus, igmpSnoopingVlanQuerierOperationalAddress IpAddress, igmpSnoopingVlanQuerierConfigureAddress IpAddress, igmpSnoopingVlanQuerierTimeout INTEGER, igmpSnoopingVlanQueryInterval INTEGER, igmpSnoopingVlanQueryMaxResponseTime INTEGER, igmpSnoopingVlanStatusGrpJoinsCnt Counter32, igmpSnoopingVlanStatusGrpLeavesCnt Counter32, igmpSnoopingVlanStatusV1QuerierWCnt Counter32, igmpSnoopingVlanStatusV2QuerierWCnt Counter32, igmpSnoopingVlanStatusResetCounters INTEGER, igmpSnoopingVlanGrpNum INTEGER, igmpSnoopingVlanElectedQuerierAddress IpAddress } igmpSnoopingVlanID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifies the VLAN id which IGMP snooping is enabled or disabled." ::= { igmpSnoopingVlanEntry 1 } igmpSnoopingVlanEnabled OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicating whether IGMP snooping is enabled on this VLAN. enable(1) disable(2)" -- DEFVAL { enabled } ::= { igmpSnoopingVlanEntry 2 } igmpSnoopingVlanFastLeaveStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Fast Leave on VLAN, enable(1) disable(2)." ::= { igmpSnoopingVlanEntry 3 } igmpSnoopingVlanReportSuppressionStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Report-Suppression on VLAN. enable(1) disable(2)" ::= { igmpSnoopingVlanEntry 4 } igmpSnoopingVlanVersion OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Version on VLAN.Version range 1~3." ::= { igmpSnoopingVlanEntry 5 } igmpSnoopingVlanMaxMemberNumber OBJECT-TYPE SYNTAX INTEGER (1..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the max member number on VLAN.Range 1~8192." ::= { igmpSnoopingVlanEntry 6 } igmpSnoopingVlanDiscardUnknownStatus OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable IGMP Snooping Discard unknown multicast traffic on VLAN. enable(1) disable(2)" ::= { igmpSnoopingVlanEntry 7 } igmpSnoopingVlanGroupAccesslist OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the IGMP Snooping Group Acess-list on VLAN." ::= { igmpSnoopingVlanEntry 8 } igmpSnoopingVlanLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER (1000..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Last Member Query Interval on VLAN. Interval range 1000~25500." ::= { igmpSnoopingVlanEntry 10 } igmpSnoopingVlanQuerier OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to Enable or Disable IGMP Snooping Querier on VLAN. enable(1) disable(2)" ::= { igmpSnoopingVlanEntry 11 } igmpSnoopingVlanQuerierOperationalAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Configure to get IGMP Snooping Querier Operational Adress on VLAN." ::= { igmpSnoopingVlanEntry 12 } igmpSnoopingVlanQuerierConfigureAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Querier Configure Adress on VLAN." ::= { igmpSnoopingVlanEntry 13 } igmpSnoopingVlanQuerierTimeout OBJECT-TYPE SYNTAX INTEGER (60..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Querier Timeout value on VLAN. Timeout range 60~300. " ::= { igmpSnoopingVlanEntry 14 } igmpSnoopingVlanQueryInterval OBJECT-TYPE SYNTAX INTEGER (2..18000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Query Interval on VLAN. Query interval should be greater than Query Response Interval. Interval range 2~18000." ::= { igmpSnoopingVlanEntry 15 } igmpSnoopingVlanQueryMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set IGMP Snooping Query Max Response Time on VLAN." ::= { igmpSnoopingVlanEntry 16 } igmpSnoopingVlanStatusGrpJoinsCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Configure to get IGMP Snooping Group Joins Count on VLAN." ::= { igmpSnoopingVlanEntry 17 } igmpSnoopingVlanStatusGrpLeavesCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Configure to get IGMP Snooping Group Leaves Count on VLAN." ::= { igmpSnoopingVlanEntry 18 } igmpSnoopingVlanStatusV1QuerierWCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Configure to get IGMP Snooping Group V1-Querier Warnings Count on VLAN." ::= { igmpSnoopingVlanEntry 19 } igmpSnoopingVlanStatusV2QuerierWCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Configure to get IGMP Snooping Group V2-Querier Warnings Count on VLAN." ::= { igmpSnoopingVlanEntry 20 } igmpSnoopingVlanStatusResetCounters OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Configure to reset IGMP SnoopingStatus Counters on VLAN. 1 reset." ::= { igmpSnoopingVlanEntry 21 } igmpSnoopingVlanGrpNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Configure to get IGMP Snooping group number on VLAN." ::= { igmpSnoopingVlanEntry 22 } igmpSnoopingVlanElectedQuerierAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Configure to get IGMP Snooping Elected Querier Adress on VLAN." ::= { igmpSnoopingVlanEntry 23 } igmpSnoopingMrouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpSnoopingMrouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about igmp snooping mrouter port list per vlan." ::= { lswIgmpsnoopingMibObject 11 } igmpSnoopingMrouterPortEntry OBJECT-TYPE SYNTAX IgmpSnoopingMrouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about IGMP Snooping Mrouter Port on VLAN." INDEX { igmpSnoopingVlanid, igmpSnoopingmrouterPort} ::= { igmpSnoopingMrouterPortTable 1 } IgmpSnoopingMrouterPortEntry ::= SEQUENCE { igmpSnoopingVlanid Integer32, igmpSnoopingmrouterPort Integer32, igmpSnoopingmrouterPortRowStatus RowStatus } igmpSnoopingVlanid OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN identifier of this mrouter port." ::= { igmpSnoopingMrouterPortEntry 1 } igmpSnoopingmrouterPort OBJECT-TYPE SYNTAX Integer32 (1..1152) MAX-ACCESS not-accessible STATUS current DESCRIPTION "mrouter port ifindex . 1~1024 is switch port, 1025~1151 is agg port(agg1~127)." ::= { igmpSnoopingMrouterPortEntry 2 } igmpSnoopingmrouterPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { igmpSnoopingMrouterPortEntry 3 } igmpSnoopingGrpNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Configure to get IGMP Snooping total group number." ::= { lswIgmpsnoopingMibObject 12 } igmpSnoopingGrplimitReach NOTIFICATION-TYPE OBJECTS { configSave } STATUS current DESCRIPTION "Igmp snooping group record reaches total limit" ::= { lswIgmpsnoopingTrap 1 } igmpSnoopingVlanGrplimitReach NOTIFICATION-TYPE OBJECTS { configSave } STATUS current DESCRIPTION "Igmp snooping group record reaches limit on vlan" ::= { lswIgmpsnoopingTrap 2 } igmpSnoopingVlanQuerierSwitch NOTIFICATION-TYPE OBJECTS { igmpSnoopingVlanQuerierOperationalAddress } STATUS current DESCRIPTION "Igmp snooping group querier changes" ::= { lswIgmpsnoopingTrap 3 } -- Sub Module: LINKAGG -- -- for load balance -- linkAggLoadBalance OBJECT-TYPE SYNTAX BITS { dst-mac(0), src-mac(1), src-ip(2), dst-ip(3), src-port(4), dst-port(5), ip-protocol(6), vxlan-vni(7), nvgre-vsid(8), inner-dst-mac(9), inner-src-mac(10), inner-src-ip(11), inner-dst-ip(12), inner-src-port(13), inner-dst-port(14), inner-ip-protocol(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config load balance. 1 dst-mac. 2 src-mac. 3 src-ip. 4 dst-ip. 5 src-port. 6 dst-port. 7 ip-protocol. 8 vxlan-vni. 9 nvgre-vsid. 10 inner-dst-mac. 11 inner-src-mac. 12 inner-src-ip. 13 inner-dst-ip. 14 inner-src-port. 15 inner-dst-port. 16 inner-ip-protocol." ::= { linkAgg 1 } lacpObject OBJECT IDENTIFIER ::= { linkAgg 2 } -- -- config lacp system priority -- lacpSysPriorityCfg OBJECT IDENTIFIER ::= { lacpObject 1 } lacpSysPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Config lacp system priority." ::= { lacpSysPriorityCfg 1 } -- -- config channel group on port -- lacpIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for lacp configuration on interface." ::= { lacpObject 2 } lacpIfCfgEntry OBJECT-TYPE SYNTAX LacpIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for lacp configuration on interface." INDEX { lacpIfCfgAdminAggNumber, ifIndex } ::= { lacpIfCfgTable 1 } LacpIfCfgEntry ::= SEQUENCE { lacpIfCfgAdminAggNumber Integer32, lacpIfCfgMode INTEGER, lacpIfCfgRowStatus RowStatus } lacpIfCfgAdminAggNumber OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Config channel group number." ::= { lacpIfCfgEntry 1 } lacpIfCfgMode OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The channel group mode." ::= { lacpIfCfgEntry 2 } lacpIfCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { lacpIfCfgEntry 3 } -- -- config lacp parameter on port -- lacpIfCfgParaTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpIfCfgParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for lacp configuration on interface." ::= { lacpObject 3 } lacpIfCfgParaEntry OBJECT-TYPE SYNTAX LacpIfCfgParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for lacp configuration on interface." INDEX { ifIndex } ::= { lacpIfCfgParaTable 1 } LacpIfCfgParaEntry ::= SEQUENCE { lacpIfCfgParaPriority Integer32, lacpIfCfgParaTimeOut INTEGER } lacpIfCfgParaPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Config lacp priority on interface." ::= { lacpIfCfgParaEntry 1 } lacpIfCfgParaTimeOut OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config lacp expire timer on interface." ::= { lacpIfCfgParaEntry 2 } -- -- display port state -- lacpPortStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpPortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying port state of interface." ::= { lacpObject 4 } lacpPortStateEntry OBJECT-TYPE SYNTAX LacpPortStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for lacp configuration on interface." INDEX { lacpPortStateGroupNum, ifIndex } ::= { lacpPortStateTable 1 } LacpPortStateEntry ::= SEQUENCE { lacpPortStateGroupNum Integer32, lacpPortState OCTET STRING } lacpPortStateGroupNum OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display port state." ::= { lacpPortStateEntry 1 } lacpPortState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display port state." ::= { lacpPortStateEntry 2 } -- -- display lacp actor state -- lacpActorStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpActorStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying actor state." ::= { lacpObject 5 } lacpActorStateEntry OBJECT-TYPE SYNTAX LacpActorStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying actor state." INDEX { lacpActorGroupNum, ifIndex } ::= { lacpActorStateTable 1 } LacpActorStateEntry ::= SEQUENCE { lacpActorGroupNum Integer32, lacpActorSystemId OCTET STRING, lacpActorPortNum Integer32, lacpActorPortTransitPduType OCTET STRING, lacpActorPortMode OCTET STRING, lacpActorPortPriority Integer32, lacpActorPortOperKey Integer32, lacpActorPortStatsFlag OCTET STRING, lacpActorPortActivity OCTET STRING, lacpActorPortTimeout OCTET STRING, lacpActorPortAggregation OCTET STRING, lacpActorPortSynchronization OCTET STRING, lacpActorPortCollecting OCTET STRING, lacpActorPortDistributing OCTET STRING, lacpActorPortDefaulted OCTET STRING, lacpActorPortExpired OCTET STRING } lacpActorGroupNum OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display actor group number." ::= { lacpActorStateEntry 1 } lacpActorSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor system id." ::= { lacpActorStateEntry 2 } lacpActorPortNum OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port number." ::= { lacpActorStateEntry 3 } lacpActorPortTransitPduType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port number. It should be 'fast' or 'slow'. " ::= { lacpActorStateEntry 4 } lacpActorPortMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port mode. It should be 'active' or 'passive'." ::= { lacpActorStateEntry 5 } lacpActorPortPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port priority." ::= { lacpActorStateEntry 6 } lacpActorPortOperKey OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port operate key." ::= { lacpActorStateEntry 7 } lacpActorPortStatsFlag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port stats flag." ::= { lacpActorStateEntry 8 } lacpActorPortActivity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port activity. It should be 'active' or 'passive'." ::= { lacpActorStateEntry 9 } lacpActorPortTimeout OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port timeout. It should be 'short' or 'long'." ::= { lacpActorStateEntry 10 } lacpActorPortAggregation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port number. It should be 'yes' or 'no'." ::= { lacpActorStateEntry 11 } lacpActorPortSynchronization OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port synchronization. It should be 'yes' or 'no'." ::= { lacpActorStateEntry 12 } lacpActorPortCollecting OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port collecting. It should be 'yes' or 'no'." ::= { lacpActorStateEntry 13 } lacpActorPortDistributing OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port distributing. It should be 'yes' or 'no'." ::= { lacpActorStateEntry 14 } lacpActorPortDefaulted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port defaulted. It should be 'yes' or 'no'." ::= { lacpActorStateEntry 15 } lacpActorPortExpired OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display actor port expired . It should be 'yes' or 'no'." ::= { lacpActorStateEntry 16 } -- -- display lacp neighbor state -- lacpNeighborStateTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpNeighborStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying neighbor state." ::= { lacpObject 6 } lacpNeighborStateEntry OBJECT-TYPE SYNTAX LacpNeighborStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying neighbor state." INDEX { lacpNeighborGroupNum, ifIndex } ::= { lacpNeighborStateTable 1 } LacpNeighborStateEntry ::= SEQUENCE { lacpNeighborGroupNum Integer32, lacpNeighborSystemId OCTET STRING, lacpNeighborPortNum Integer32, lacpNeighborPortTransitPduType OCTET STRING, lacpNeighborPortMode OCTET STRING, lacpNeighborPortPriority Integer32, lacpNeighborOperKey Integer32, lacpNeighborPortStatsFlag OCTET STRING, lacpNeighborPortActivity OCTET STRING, lacpNeighborPortTimeout OCTET STRING, lacpNeighborPortAggregation OCTET STRING, lacpNeighborPortSynchronization OCTET STRING, lacpNeighborPortCollecting OCTET STRING, lacpNeighborPortDistributing OCTET STRING, lacpNeighborPortDefaulted OCTET STRING, lacpNeighborPortExpired OCTET STRING } lacpNeighborGroupNum OBJECT-TYPE SYNTAX Integer32(1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "display neighbor group number." ::= { lacpNeighborStateEntry 1 } lacpNeighborSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor system id." ::= { lacpNeighborStateEntry 2 } lacpNeighborPortNum OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor port number." ::= { lacpNeighborStateEntry 3 } lacpNeighborPortTransitPduType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor port transmit pdu. It should be 'fast' or 'slow'." ::= { lacpNeighborStateEntry 4 } lacpNeighborPortMode OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor port mode. It should be 'active' or 'passive'." ::= { lacpNeighborStateEntry 5 } lacpNeighborPortPriority OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor port number." ::= { lacpNeighborStateEntry 6 } lacpNeighborOperKey OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor operational key." ::= { lacpNeighborStateEntry 7 } lacpNeighborPortStatsFlag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag." ::= { lacpNeighborStateEntry 8 } lacpNeighborPortActivity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'active' or 'passive'." ::= { lacpNeighborStateEntry 9 } lacpNeighborPortTimeout OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'short' or 'long'." ::= { lacpNeighborStateEntry 10 } lacpNeighborPortAggregation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 11 } lacpNeighborPortSynchronization OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 12 } lacpNeighborPortCollecting OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 13 } lacpNeighborPortDistributing OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 14 } lacpNeighborPortDefaulted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 15 } lacpNeighborPortExpired OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor stats flag. It should be 'yes' or 'no'." ::= { lacpNeighborStateEntry 16 } -- -- -- lacpCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying neighbor state." ::= { lacpObject 7 } lacpCounterEntry OBJECT-TYPE SYNTAX LacpCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for displaying neighbor state." INDEX { lacpCounterGroupNum } ::= { lacpCounterTable 1 } LacpCounterEntry ::= SEQUENCE { lacpCounterGroupNum Integer32, lacpCounterSendPduCnt Integer32, lacpCounterRecvPduCnt Integer32, lacpCounterSendErrPktCnt Integer32, lacpCounterRecvErrPktCnt Integer32 } lacpCounterGroupNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display lacp group number." ::= { lacpCounterEntry 1 } lacpCounterSendPduCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display lacp send pdu counts." ::= { lacpCounterEntry 2 } lacpCounterRecvPduCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor receive pdu counts." ::= { lacpCounterEntry 3 } lacpCounterSendErrPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor send error packet counts." ::= { lacpCounterEntry 4 } lacpCounterRecvErrPktCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display neighbor recevie error packet counts." ::= { lacpCounterEntry 5 } -- -- clear lacp counter -- lacpClearCntCfg OBJECT IDENTIFIER ::= { lacpObject 8 } lacpClearCounter OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "clear lacp counter. The system will clear all lacp's couter if the value is '0'." ::= { lacpClearCntCfg 1 } staticLinkAggObject OBJECT IDENTIFIER ::= { linkAgg 3 } -- -- -- static link aggregation table -- staticLinkAggTable OBJECT-TYPE SYNTAX SEQUENCE OF StaticLinkAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the link aggregator number, name and configure type and memberlist." ::= { staticLinkAggObject 1 } staticLinkAggEntry OBJECT-TYPE SYNTAX StaticLinkAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the link aggregator number, name and configure type and memberlist." INDEX { staticLinkAggNumber, ifIndex } ::= { staticLinkAggTable 1 } StaticLinkAggEntry ::= SEQUENCE { staticLinkAggNumber Integer32, staticLinkAggIndex Integer32, staticLinkAggName OCTET STRING, staticLinkAggMemberIndex Integer32, staticLinkAggMemberName OCTET STRING, staticLinkAggMemberEnable INTEGER, staticLinkAggMemberRowStatus RowStatus } staticLinkAggNumber OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of Link aggregator interface.This is the index of Link Aggregator table." ::= { staticLinkAggEntry 1 } staticLinkAggIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of link aggregator interface." ::= { staticLinkAggEntry 2 } staticLinkAggName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of link aggregator interface." ::= { staticLinkAggEntry 3 } staticLinkAggMemberIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of interface member added to link aggregator." ::= { staticLinkAggEntry 4 } staticLinkAggMemberName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of interface member added to link aggregator." ::= { staticLinkAggEntry 5 } staticLinkAggMemberEnable OBJECT-TYPE SYNTAX INTEGER { down(0), bundle(1), adminDown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The member is Bundle when the value is 1. the member is down when the value is 0. the member is admin down when the value is 2." ::= { staticLinkAggEntry 6 } staticLinkAggMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { staticLinkAggEntry 7 } -- Sub Module: QBRIDGEEXT VlanIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d " STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted.If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention).If the value is greater than 4095, then it represents a VLAN with scope local to the particular agent, i.e., one without a global VLAN-ID assigned to it.Such VLANs are outside the scope of IEEE 802.1Q, but it is convenient to be able to manage them in the same way using this MIB." SYNTAX Unsigned32 VlanList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs." SYNTAX OCTET STRING (SIZE(0..256)) VlanClassRuleIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d " STATUS current DESCRIPTION "A value used to index vlan class rule tables: values of 0 to 4095 are permitted." SYNTAX INTEGER (0..4095) VlanClassGroupIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d " STATUS current DESCRIPTION "A value used to index vlan class group tables: values of 0 to 31 are permitted." SYNTAX INTEGER (0..31) VlanClassProtocol ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d " STATUS current DESCRIPTION "A value used to index vlan class Protocols." SYNTAX INTEGER { ip(1), ipv4(2), ipv6(3), mpls(4), mplsmcast(5), arp(6), rarp(7), pppoe(11) } VlanClassEnableBase ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "d " STATUS current DESCRIPTION "A value used to index vlan class enable based." SYNTAX INTEGER { mac(1), ip(2), protocol(4) } VlanClassIpv6Address ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order." SYNTAX OCTET STRING (SIZE (16)) -- -- groups in the QBRIDGEEXT MIB -- vlanExt OBJECT IDENTIFIER ::= { qBridgeExt 1 } fdbExt OBJECT IDENTIFIER ::= { qBridgeExt 2 } vlanClass OBJECT IDENTIFIER ::= { qBridgeExt 3 } -- -- vlanExt group -- vlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about VLAN entries of the device." ::= { vlanExt 1 } vlanEntry OBJECT-TYPE SYNTAX VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific VLAN of the device." INDEX { vlanIndex } ::= { vlanTable 1 } VlanEntry ::= SEQUENCE { vlanIndex VlanIndex, vlanName OCTET STRING, vlanStatus INTEGER, vlanRowStatus RowStatus , vlanIfConfig INTEGER, vlanStatsPktIn Counter64, vlanStatsPktOut Counter64, vlanStatsByteIn Counter64, vlanStatsByteOut Counter64, vlanStatsEn INTEGER } vlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An forward ID, which may be same as VLAN ID in IVL mode." ::= { vlanEntry 1 } vlanName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively assigned string, which may be used to identify the VLAN." ::= { vlanEntry 2 } vlanStatus OBJECT-TYPE SYNTAX INTEGER{ inactive(1), active(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively VLANStatus . 1 Inactive; 2 Active(2)." ::= { vlanEntry 3 } vlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { vlanEntry 4 } vlanIfConfig OBJECT-TYPE SYNTAX INTEGER { create(1), destroy(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object create/destroy vlan interface. 1 Create. 2 Destroy." ::= { vlanEntry 5 } vlanStatsPktIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packtes number of Vlan." ::= { vlanEntry 7 } vlanStatsPktOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packtes number of Vlan." ::= { vlanEntry 8 } vlanStatsByteIn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of Vlan." ::= { vlanEntry 9 } vlanStatsByteOut OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of Vlan." ::= { vlanEntry 10 } vlanStatsEn OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize Active(1) and Inactive(0)." ::= { vlanEntry 11 } portVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF PortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about interface's VLAN properties." ::= { vlanExt 2 } portVlanEntry OBJECT-TYPE SYNTAX PortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific interface's VLAN properties." INDEX { ifIndex } ::= { portVlanTable 1 } PortVlanEntry ::= SEQUENCE { vlanTagType INTEGER, pvid INTEGER, ingressFilter INTEGER, allowedVlans VlanList, allowedVlanAdd VlanList, allowedVlanDel VlanList } vlanTagType OBJECT-TYPE SYNTAX INTEGER{ all(1), qinq(2), untagged(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "all(1) -- trunk mode qinq(2) -- qinq mode untagged(3) -- access mode." ::= { portVlanEntry 1 } pvid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively assigned string, which may be used to identify the VLAN. Vid range is 2~4094." ::= { portVlanEntry 2 } ingressFilter OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively assigned string, which may be used to identify the VLAN. 1 Enable. 2 Disable." ::= { portVlanEntry 3 } allowedVlans OBJECT-TYPE SYNTAX VlanList MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN list of this port, should use the 3 format below: all - all VLANs in the VLAN database none - none VLAN string such as 1,3,10-20,4094 " ::= { portVlanEntry 4 } allowedVlanAdd OBJECT-TYPE SYNTAX VlanList MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN list to add to this port, string such as 1,3,10-20,4094. Use for set node, when get node return meaningless." ::= { portVlanEntry 5 } allowedVlanDel OBJECT-TYPE SYNTAX VlanList MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN list to remove from this port, string such as 1,3,10-20,4094. Use for set node, when get node return meaningless." ::= { portVlanEntry 6 } vlanReplaceDscpExpTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanReplaceDscpExpEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "A table that contains information about VLAN Replace Dscp/Exp of the device. Not support on this version" ::= { vlanExt 3 } vlanReplaceDscpExpEntry OBJECT-TYPE SYNTAX VlanReplaceDscpExpEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Information about a specific VLAN of the device." INDEX { vlanReplaceDscpExpIndex } ::= { vlanReplaceDscpExpTable 1 } VlanReplaceDscpExpEntry ::= SEQUENCE { vlanReplaceDscpExpIndex VlanIndex, vlanReplaceDscpExpEn INTEGER } vlanReplaceDscpExpIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Index of VLAN ID in IVL mode." ::= { vlanReplaceDscpExpEntry 1 } vlanReplaceDscpExpEn OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Status of replace the dscp/exp field in packets on egress for specified VLAN.. 1 replace dscp/exp; 2 do not replace dscp/exp." DEFVAL { disable } ::= { vlanReplaceDscpExpEntry 2 } -- -- fdbExt group -- unicastTable OBJECT-TYPE SYNTAX SEQUENCE OF UnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about unicast entries for which the device has forwarding and/or filtering information.This information is used by the transparent bridging function in determining how to propagate a received frame." ::= { fdbExt 1 } unicastEntry OBJECT-TYPE SYNTAX UnicastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information." INDEX { vlanIndex, unicastAddress , fdbPort} ::= { unicastTable 1 } UnicastEntry ::= SEQUENCE { unicastVID VlanIndex, unicastAddress MacAddress, fdbPort INTEGER, fdbStatus INTEGER, fdbRowStatus RowStatus } unicastVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN identifier of this FDB entry." ::= { unicastEntry 1 } unicastAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast MAC address for which the device has forwarding and/or filtering information." ::= { unicastEntry 2 } fdbPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Either the value '0', or the port number." ::= { unicastEntry 3 } fdbStatus OBJECT-TYPE SYNTAX INTEGER { static(1), learned(2), self(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object clear the MAC address of this system theStatus of this entry. static(1) - the value of static configured MAC address, used for forwarding. dynamic(2) - the value of learnt MAC address." ::= { unicastEntry 4 } fdbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1). Can't destroy a learned fdb entry. Using the node addressClearOperation can destroy learned fdb entries." ::= { unicastEntry 5 } multicastTable OBJECT-TYPE SYNTAX SEQUENCE OF MulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about unicast entries for which the device has forwarding and/or filtering information.This information is used by the transparent bridging function in determining how to propagate a received frame." ::= { fdbExt 2 } multicastEntry OBJECT-TYPE SYNTAX MulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific multicast MAC address for which the device has some forwarding and/or filtering information." INDEX { vlanIndex, multicastAddress, destinationPort} ::= { multicastTable 1 } MulticastEntry ::= SEQUENCE { multicastVID VlanIndex, multicastAddress MacAddress, destinationPort Integer32, multicastRowStatus RowStatus } multicastVID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN identifier of this multicast entry." ::= { multicastEntry 1 } multicastAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A multicast MAC address for which the device has forwarding and/or filtering information." ::= { multicastEntry 2 } destinationPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A destination port of the multicast MAC address for which the device has forwarding and/or filtering information." ::= { multicastEntry 3 } multicastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. Can't destroy a learned fdb entry. Using the node addressClearOperation can destroy learned fdb entries. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { multicastEntry 4 } filterTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { fdbExt 3 } filterEntry OBJECT-TYPE SYNTAX FilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter MAC address for which the device has filtering information." INDEX { filterAddress } ::= { filterTable 1 } FilterEntry ::= SEQUENCE { filterAddress MacAddress, filterRowStatus RowStatus } filterAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast MAC address for which the device has filtering information." ::= { filterEntry 1 } filterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { filterEntry 2 } addressClearOperation OBJECT-TYPE SYNTAX INTEGER{ static(1), dynamic(2), filter(3), multicast(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object clear the MAC address of this system theStatus of this entry. static(1) - clear those entris which are created by management. dynamic(2) - clear those entris which are created by learning. filter(3) - clear those MAC filter entris. multicast(4) - clear all multicast entries configured through management." ::= { fdbExt 4 } addressAgingTime OBJECT-TYPE SYNTAX INTEGER (10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Dynamic mac address aging time, the unit of which is second. Ageing-time range 10~1000000" ::= { fdbExt 5 } fdbExtTrap OBJECT IDENTIFIER ::= { fdbExt 10 } fdbExtDbFull NOTIFICATION-TYPE OBJECTS { vlanIndex } STATUS current DESCRIPTION "Fdb DB full." ::= { fdbExtTrap 1 } -- -- vlanClass -- --VlanClassRuleIp vlanClassRuleIpTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanClassRuleIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { vlanClass 1 } vlanClassRuleIpEntry OBJECT-TYPE SYNTAX VlanClassRuleIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter IP address for which the device has filtering information." INDEX { vlanClassRuleIpIndex, vlanClassRuleIpAddress,vlanClassRuleIpAddressLen, vlanClassIpVlanID} ::= { vlanClassRuleIpTable 1 } VlanClassRuleIpEntry ::= SEQUENCE { vlanClassRuleIpIndex VlanClassRuleIndex, vlanClassRuleIpAddress IpAddress, vlanClassRuleIpAddressLen Integer32, vlanClassIpVlanID VlanIndex, vlanClassRuleIpRowStatus RowStatus } vlanClassRuleIpIndex OBJECT-TYPE SYNTAX VlanClassRuleIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Vlan Class rule ID." ::= { vlanClassRuleIpEntry 1 } vlanClassRuleIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast IP address for which the device has filtering information." ::= { vlanClassRuleIpEntry 2 } vlanClassRuleIpAddressLen OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the mask lenghth of ip." ::= { vlanClassRuleIpEntry 3 } vlanClassIpVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID which is mapped for the entry." ::= { vlanClassRuleIpEntry 4 } vlanClassRuleIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vlanClassRuleIpEntry 5 } --VlanClassRuleMac vlanClassRuleMacTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanClassRuleMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { vlanClass 2 } vlanClassRuleMacEntry OBJECT-TYPE SYNTAX VlanClassRuleMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter MAC address for which the device has filtering information." INDEX { vlanClassRuleMacIndex, vlanClassRuleMacAddress,vlanClassMacVlanID} ::= { vlanClassRuleMacTable 1 } VlanClassRuleMacEntry ::= SEQUENCE { vlanClassRuleMacIndex VlanClassRuleIndex, vlanClassRuleMacAddress MacAddress, vlanClassMacVlanID VlanIndex, vlanClassRuleMacRowStatus RowStatus } vlanClassRuleMacIndex OBJECT-TYPE SYNTAX VlanClassRuleIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Vlan Class rule ID." ::= { vlanClassRuleMacEntry 1 } vlanClassRuleMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unicast MAC address for which the device has filtering information." ::= { vlanClassRuleMacEntry 2 } vlanClassMacVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID which is mapped for the entry." ::= { vlanClassRuleMacEntry 3 } vlanClassRuleMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vlanClassRuleMacEntry 4 } --VlanClassRuleProtocol vlanClassRuleProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanClassRuleProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { vlanClass 3 } vlanClassRuleProtocolEntry OBJECT-TYPE SYNTAX VlanClassRuleProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter Protocol for which the device has filtering information." INDEX { vlanClassRuleProtocolIndex, vlanClassRuleProtocol,vlanClassProtocolVlanID} ::= { vlanClassRuleProtocolTable 1 } VlanClassRuleProtocolEntry ::= SEQUENCE { vlanClassRuleProtocolIndex VlanClassRuleIndex, vlanClassRuleProtocol VlanClassProtocol, vlanClassProtocolVlanID VlanIndex, vlanClassRuleProtocolRowStatus RowStatus } vlanClassRuleProtocolIndex OBJECT-TYPE SYNTAX VlanClassRuleIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Vlan Class rule ID." ::= { vlanClassRuleProtocolEntry 1 } vlanClassRuleProtocol OBJECT-TYPE SYNTAX VlanClassProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol for which the device has filtering information. 2504 means ARP 32821 means RARP 2048 means IPv4 34525 means IPv6 34887 means MPLS 34888 means MPLS Multicast 13 means PPPOE " ::= { vlanClassRuleProtocolEntry 2 } vlanClassProtocolVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID which is mapped for the entry." ::= { vlanClassRuleProtocolEntry 3 } vlanClassRuleProtocolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vlanClassRuleProtocolEntry 4 } --VlanClassRuleIpv6 --vlanClassRuleIpv6Table OBJECT-TYPE -- SYNTAX SEQUENCE OF VlanClassRuleIpv6Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A table that contains information about filter entries -- for which the device has filtering information." -- ::= { vlanClass 4 } --vlanClassRuleIpv6Entry OBJECT-TYPE -- SYNTAX VlanClassRuleIpv6Entry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Information about a specific filter IPv6 address for which the device -- has filtering information." -- INDEX { vlanClassRuleIpv6Index, vlanClassRuleIpv6Address,vlanClassRuleIpv6AddressLen, vlanClassIpv6VlanID} -- ::= { vlanClassRuleIpv6Table 1 } -- --VlanClassRuleIpv6Entry ::= -- SEQUENCE { -- vlanClassRuleIpv6Index -- VlanClassRuleIndex, -- vlanClassRuleIpv6Address -- VlanClassIpv6Address, -- vlanClassRuleIpv6AddressLen -- Integer32, -- vlanClassIpv6VlanID -- VlanIndex, -- vlanClassRuleIpv6RowStatus --RowStatus -- } --vlanClassRuleIpv6Index OBJECT-TYPE -- SYNTAX VlanClassRuleIndex -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "An Vlan Class rule ID." -- ::= { vlanClassRuleIpv6Entry 1 } -- --vlanClassRuleIpv6Address OBJECT-TYPE -- SYNTAX VlanClassIpv6Address -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "A unicast IP address for which the device has filtering information." -- ::= { vlanClassRuleIpv6Entry 2 } -- --vlanClassRuleIpv6AddressLen OBJECT-TYPE -- SYNTAX Integer32 (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the mask lenghth of ip." -- ::= { vlanClassRuleIpv6Entry 3 } -- --vlanClassIpv6VlanID OBJECT-TYPE -- SYNTAX VlanIndex -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Vlan ID which is mapped for the entry." -- ::= { vlanClassRuleIpv6Entry 4 } -- --vlanClassRuleIpv6RowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo -- and Destroy and Active." -- ::= { vlanClassRuleIpv6Entry 5 } -- --VlanClassGroup vlanClassGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanClassGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { vlanClass 5 } vlanClassGroupEntry OBJECT-TYPE SYNTAX VlanClassGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter group for which the device has filtering information." INDEX { vlanClassGroupIndex,vlanClassRuleIndex } ::= { vlanClassGroupTable 1 } VlanClassGroupEntry ::= SEQUENCE { vlanClassGroupIndex VlanClassGroupIndex, vlanClassRuleIndex VlanClassRuleIndex, vlanClassGroupRowStatus RowStatus } vlanClassGroupIndex OBJECT-TYPE SYNTAX VlanClassGroupIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Vlan Class group ID." ::= { vlanClassGroupEntry 1 } vlanClassRuleIndex OBJECT-TYPE SYNTAX VlanClassRuleIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vlan Class rule index." ::= { vlanClassGroupEntry 2 } vlanClassGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vlanClassGroupEntry 3 } --VlanClass Enable inteface vlanClassEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanClassEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about filter entries for which the device has filtering information." ::= { vlanClass 6 } vlanClassEnableEntry OBJECT-TYPE SYNTAX VlanClassEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific filter for which the device has filtering information." INDEX { vlanClassEnableIfIndex} ::= { vlanClassEnableTable 1 } VlanClassEnableEntry ::= SEQUENCE { vlanClassEnableIfIndex Integer32, vlanClassEnableGroup VlanClassGroupIndex, vlanClassEnableBase VlanClassEnableBase, vlanClassEnableRowStatus RowStatus } vlanClassEnableIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index which is enabled for Vlan Class ." ::= { vlanClassEnableEntry 1 } vlanClassEnableGroup OBJECT-TYPE SYNTAX VlanClassGroupIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The Vlan Class group ID. Group ID range is 0~31." ::= { vlanClassEnableEntry 2 } vlanClassEnableBase OBJECT-TYPE SYNTAX VlanClassEnableBase MAX-ACCESS read-create STATUS current DESCRIPTION "Vlan ID which is mapped for the entry." ::= { vlanClassEnableEntry 3 } vlanClassEnableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vlanClassEnableEntry 5 } -- Sub Module: DOT1XEXT -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== dot1xExtMaxReauthReqTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xExtMaxReauthReqEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of login entry." ::= { dot1xExt 1 } dot1xExtMaxReauthReqEntry OBJECT-TYPE SYNTAX Dot1xExtMaxReauthReqEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login entry" INDEX { dot1xExtMaxReauthReqIndex} ::= { dot1xExtMaxReauthReqTable 1 } Dot1xExtMaxReauthReqEntry ::= SEQUENCE { dot1xExtMaxReauthReqIndex Integer32, dot1xExtMaxReauthReqVersion INTEGER, dot1xExtMaxReauthReqNum Integer32, dot1xExtMaxReqNum Integer32 } dot1xExtMaxReauthReqIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index." ::= { dot1xExtMaxReauthReqEntry 1 } dot1xExtMaxReauthReqVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the protocol version and the default number is 2.The range is 1 to 2. " DEFVAL {version2} ::= { dot1xExtMaxReauthReqEntry 2 } dot1xExtMaxReauthReqNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of reauthentication attempts before becoming unauthorized. The range is 1 to 10. Not supported now" ::= { dot1xExtMaxReauthReqEntry 3 } dot1xExtMaxReqNum OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of times that the switch sends an EAP-request/identity frame to the client. The range is 1 to 10." DEFVAL {2} ::= { dot1xExtMaxReauthReqEntry 4 } -- IEEE 802.1X VLAN policy dot1xExtVlanPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xExtVlanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of dot1x guest vlan configuration." ::= { dot1xExt 2 } dot1xExtVlanPolicyEntry OBJECT-TYPE SYNTAX Dot1xExtVlanPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of dot1x guest vlan configuration." INDEX { dot1xExtVlanPolicyIndex} ::= { dot1xExtVlanPolicyTable 1 } Dot1xExtVlanPolicyEntry ::= SEQUENCE { dot1xExtVlanPolicyIndex Integer32, dot1xExtGuestVlan Integer32 } dot1xExtVlanPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index." ::= { dot1xExtVlanPolicyEntry 1 } dot1xExtGuestVlan OBJECT-TYPE SYNTAX Integer32 (0|2..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "When you configure a guest VLAN, clients that are not IEEE 802.1x-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are IEEE 802.1x-capable but fail authentication not granted network access.The vlan range is between [2-4094], 0 means guest vlan is not configured." DEFVAL {0} ::= { dot1xExtVlanPolicyEntry 2 } -- IEEE 802.1X global resource dot1xExtMacBasedResource OBJECT IDENTIFIER ::= { dot1xExt 3 } dot1xExtMacBasedResourceMaxInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max count of dot1x mac based interface. " ::= { dot1xExtMacBasedResource 1 } dot1xExtMacBasedResourceCurrentInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current count of dot1x mac based interface. " ::= { dot1xExtMacBasedResource 2 } dot1xExtMacBasedResourceMaxUser OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max count of dot1x mac based users (only include hardware accept or reject entries). " ::= { dot1xExtMacBasedResource 3 } dot1xExtMacBasedResourceCurrentUser OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current count of dot1x mac based users (only include hardware accept or reject entries). " ::= { dot1xExtMacBasedResource 4 } dot1xExtMacBasedResourceMaxUserAll OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max count of all dot1x mac based users (include waiting entries). " ::= { dot1xExtMacBasedResource 5 } dot1xExtMacBasedResourceCurrentUserAll OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current count of all dot1x mac based users (include waiting entries). " ::= { dot1xExtMacBasedResource 6 } -- IEEE 802.1X Mac based config dot1xExtMacBasedConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xExtMacBasedConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of dot1x mac based interface." ::= { dot1xExt 4 } dot1xExtMacBasedConfigEntry OBJECT-TYPE SYNTAX Dot1xExtMacBasedConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Dot1x mac based interface entry" INDEX { dot1xExtMacBasedConfigIndex} ::= { dot1xExtMacBasedConfigTable 1 } Dot1xExtMacBasedConfigEntry ::= SEQUENCE { dot1xExtMacBasedConfigIndex Integer32, dot1xExtMacBasedConfigMode INTEGER, dot1xExtMacBasedConfigBypassEn INTEGER, dot1xExtMacBasedConfigMaxUser Integer32, dot1xExtMacBasedConfigCurrentUser Integer32, dot1xExtMacBasedConfigMaxUserAll Integer32, dot1xExtMacBasedConfigCurrentUserAll Integer32 } dot1xExtMacBasedConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { dot1xExtMacBasedConfigEntry 1 } dot1xExtMacBasedConfigMode OBJECT-TYPE SYNTAX INTEGER { port(0), mac(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Dot1x port mode. 0: dot1x port based mode. 1: dot1x mac based mode." DEFVAL{port} ::= { dot1xExtMacBasedConfigEntry 2 } dot1xExtMacBasedConfigBypassEn OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Dot1x mac auth bypass function. 0: disable. 1: enable" DEFVAL{disable} ::= { dot1xExtMacBasedConfigEntry 3 } dot1xExtMacBasedConfigMaxUser OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Max user number of the port (only include hardware accept or reject entries). Default: by default the max user number of the port is same as the max user number of the system. Different TCAM proflies have different default values." ::= { dot1xExtMacBasedConfigEntry 4 } dot1xExtMacBasedConfigCurrentUser OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Current user number of the port (only include hardware accept or reject entries)" DEFVAL{0} ::= { dot1xExtMacBasedConfigEntry 5 } dot1xExtMacBasedConfigMaxUserAll OBJECT-TYPE SYNTAX Integer32 (1..510) MAX-ACCESS read-only STATUS current DESCRIPTION "Max user number of the port (include waiting entries)" ::= { dot1xExtMacBasedConfigEntry 6 } dot1xExtMacBasedConfigCurrentUserAll OBJECT-TYPE SYNTAX Integer32 (0..510) MAX-ACCESS read-only STATUS current DESCRIPTION "Current user number of the port (include waiting entries) Default: by default the max user number of the port is same as the max user number of the system. Different TCAM proflies have different default values. It should be 2 times large as the max hardware entries number, please reference to dot1xExtMacBasedConfigCurrentUser." DEFVAL{0} ::= { dot1xExtMacBasedConfigEntry 7 } -- IEEE 802.1X Mac based user entry dot1xExtMacBasedUserTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xExtMacBasedUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of dot1x mac based users." ::= { dot1xExt 5 } dot1xExtMacBasedUserEntry OBJECT-TYPE SYNTAX Dot1xExtMacBasedUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Dot1x mac based user entry" INDEX { dot1xExtMacBasedUserIndex, dot1xExtMacBasedUserMac} ::= { dot1xExtMacBasedUserTable 1 } Dot1xExtMacBasedUserEntry ::= SEQUENCE { dot1xExtMacBasedUserIndex Integer32, dot1xExtMacBasedUserMac MacAddress, dot1xExtMacBasedUserState INTEGER, dot1xExtMacBasedUserTimer Integer32, dot1xExtMacBasedUserIsBypass INTEGER, dot1xExtMacBasedUserInGuestVlan INTEGER, dot1xExtMacBasedUserGuestVlanID Integer32, dot1xExtMacBasedUserOffLine INTEGER } dot1xExtMacBasedUserIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { dot1xExtMacBasedUserEntry 1 } dot1xExtMacBasedUserMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac address of user" ::= { dot1xExtMacBasedUserEntry 2 } dot1xExtMacBasedUserState OBJECT-TYPE SYNTAX INTEGER { waiting(0), accept(1), reject(2), reauth(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the mac based user entry." ::= { dot1xExtMacBasedUserEntry 3 } dot1xExtMacBasedUserTimer OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Time (seconds) before state changed. " ::= { dot1xExtMacBasedUserEntry 4 } dot1xExtMacBasedUserIsBypass OBJECT-TYPE SYNTAX INTEGER { eapolUser(0), bypassUser(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Log on Method of the user." ::= { dot1xExtMacBasedUserEntry 5 } dot1xExtMacBasedUserInGuestVlan OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "If user is in guest vlan." ::= { dot1xExtMacBasedUserEntry 6 } dot1xExtMacBasedUserGuestVlanID OBJECT-TYPE SYNTAX Integer32(0|2..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The guest vlan id. If the user is not authenticated by guest vlan, the id should be 0." ::= { dot1xExtMacBasedUserEntry 7 } dot1xExtMacBasedUserOffLine OBJECT-TYPE SYNTAX INTEGER { none(0), offLine(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use this node to force a MAC user off line. The default value is 0. If this node's value is set to 1, the user should be forced offline and this entry should be deleted. " DEFVAL {none} ::= { dot1xExtMacBasedUserEntry 8 } dot1xExtMacBasedClear OBJECT IDENTIFIER ::= { dot1xExt 6 } dot1xExtMacBasedClearInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a interface to clear all mac users. " ::= { dot1xExtMacBasedClear 1 } -- Sub Module: TRNG -- -- Node definitions -- trngMibObjects OBJECT IDENTIFIER ::= { timeRange 1 } trngCreateTimerangeTable OBJECT-TYPE SYNTAX SEQUENCE OF TrngCreateTimerangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Creat TimeRange." ::= { trngMibObjects 1 } trngCreateTimerangeEntry OBJECT-TYPE SYNTAX TrngCreateTimerangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the entry of trngCreateTimerangeTable." INDEX { trngIndex } ::= { trngCreateTimerangeTable 1 } TrngCreateTimerangeEntry ::= SEQUENCE { trngIndex Integer32, trngName OCTET STRING, trngValidFlag TruthValue, trngCreateRowStatus RowStatus } trngIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TimeRange's index." ::= { trngCreateTimerangeEntry 1 } trngName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "TimeRange's name " ::= { trngCreateTimerangeEntry 2 } trngValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Valid or invalid flag." ::= { trngCreateTimerangeEntry 3 } trngCreateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { trngCreateTimerangeEntry 4 } trngAbsoluteTable OBJECT-TYPE SYNTAX SEQUENCE OF TrngAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Creat absoluteness time item of the TimeRange." ::= { trngMibObjects 2 } trngAbsoluteEntry OBJECT-TYPE SYNTAX TrngAbsoluteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the entry of trngAbsoluteTable." INDEX { trngAbsoluteNameIndex } ::= { trngAbsoluteTable 1 } TrngAbsoluteEntry ::= SEQUENCE { trngAbsoluteNameIndex Integer32, timerangeAbsoluteStartTime OCTET STRING, timerangeAbsoluteEndTime OCTET STRING, timerangeAbsolueRowStatus RowStatus } trngAbsoluteNameIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TimeRange's index." ::= { trngAbsoluteEntry 1 } timerangeAbsoluteStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Start point of the timerange.The format defined like 'hh:mm:ss,Mon/D/YYYY'. The Month of the year should be First three letters of the month." ::= { trngAbsoluteEntry 2 } timerangeAbsoluteEndTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "End point of the timerange.The format defined like 'hh:mm:ss,Mon/D/YYYY'. The Month of the year should be First three letters of the month." ::= { trngAbsoluteEntry 3 } timerangeAbsolueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { trngAbsoluteEntry 4 } trngPeriodicTable OBJECT-TYPE SYNTAX SEQUENCE OF TrngPeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Creat periodic time item of the TimeRange." ::= { trngMibObjects 3 } trngPeriodicEntry OBJECT-TYPE SYNTAX TrngPeriodicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of trngPeriodicTable." INDEX { trngPeriodicNameIndex } ::= { trngPeriodicTable 1 } TrngPeriodicEntry ::= SEQUENCE { trngPeriodicNameIndex Integer32, trngPeriodicStartDayOfWeek Integer32, trngPeriodicEndDayOfWeek Integer32, timerangePeriodicStartTime OCTET STRING, timerangePeriodicEndTime OCTET STRING, timerangePeriodicRowStatus RowStatus } trngPeriodicNameIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TimeRange's index." ::= { trngPeriodicEntry 1 } trngPeriodicStartDayOfWeek OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The start day of week. 1 monday 2 tuesday 3 wednesday 4 thursday 5 friday 6 saturday 7 sunday 8 daily 9 weekday 10 weekend " ::= { trngPeriodicEntry 2 } trngPeriodicEndDayOfWeek OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION " The end day of week. 1 monday 2 tuesday 3 wednesday 4 thursday 5 friday 6 saturday 7 sunday " ::= { trngPeriodicEntry 3 } timerangePeriodicStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Start point of this timerange,The format defined like 'hh:mm'." ::= { trngPeriodicEntry 4 } timerangePeriodicEndTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "End point of this timerange.The format defined like 'hh:mm'." ::= { trngPeriodicEntry 5 } timerangePeriodicRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { trngPeriodicEntry 6 } -- Sub Module: STPEXTENSIONS BridgeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Bridge-Identifier, as used in the Spanning Tree Protocol, to uniquely identify a bridge.Its first two octets (in network byte order) contain a priority value, and its last 6 octets contain the MAC address used to refer to a bridge in a unique fashion (typically, the numerically smallest MAC address of all ports on the bridge)." SYNTAX OCTET STRING (SIZE (8)) stpExtStpEnable OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether spanning tree protocol is enabled on the device or not. The meanings of the values are: enabled(1) - Enable spanning tree protocol; disabled(2) - Disable spanning tree protocol." ::= { stpExt 1 } stpExtPathcostStandard OBJECT-TYPE SYNTAX INTEGER { dot1d1998(1), dot1t(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the administrative spanning tree path cost mode configured on device. The meanings of the values are: dot1d1998(1) - the standard of path cost is IEEE 802.1D-1998 standard; dot1t(2) - the standard of path cost is IEEE 802.1T standard." ::= { stpExt 2 } stpExtBpduGuard OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the BpduGuard is enabled on the device or not. The meanings of the values are: enable(1) - Enable bpdu-guard globally; disabled(2) - Disable bpdu-guard globally." ::= { stpExt 3 } stpExtBpduFilter OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the BpduFilter is enabled on the device or not. The meanings of the values are: enable(1) - Enable bpdu-filter globally; disabled(2) - Disable bpdu-filter globally." ::= { stpExt 4 } stpExtBpduTransparent OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "An indication of whether the BpduTransparent is enabled on the device or not. If BPDU transparent is enabled(1), Bridge should forward BPDUs as common data packets; If BPDU transparent is disabled(2), Bridge should send BPDUs to CPU and discard BPDUs.The default value is disabled(2)." ::= { stpExt 5 } stpExtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains extended stp information." ::= { stpExt 6 } stpExtPortEntry OBJECT-TYPE SYNTAX StpExtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of extended stp information maintained by each port." INDEX { stpxpPortIndex } ::= { stpExtPortTable 1 } StpExtPortEntry ::= SEQUENCE { stpxpPortIndex InterfaceIndex, stpxRootGuardObjects INTEGER, stpxRestrictedTcnObjects INTEGER, stpxRestrictedRoleObjects INTEGER, stpxEdgePortAdminBpduGuardObjects INTEGER, stpxEdgePortOperBpduGuardObjects INTEGER, stpxEdgePortAdminBpduFilterObjects INTEGER, stpxEdgePortOperBpduFilterObjects INTEGER, stpxForceVersionObjects INTEGER, stpxLoopGuardObjects INTEGER } stpxpPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of the port for which this entry contains bridge management information." ::= { stpExtPortEntry 1 } stpxRootGuardObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the RootGuard capability is enabled on this port or not. When a port's root guard is enabled(1) , if this port receives a superior BPDU, this port should be set to discarding state. The default value is disabled(2)." ::= { stpExtPortEntry 2 } stpxRestrictedTcnObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the RestrictedTcn capability is enabled on this port or not. If restricted TCN is enabled(1) on a port , this port should not propagate received topology change notifications and topology changes to other Ports.The default value is disabled(2)." ::= { stpExtPortEntry 3 } stpxRestrictedRoleObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the RestrictedRole capability is enabled on this port or not. If restricted Role is enabled(1) on a port, this Port should not to be selected as Root Port ; even it has the best spanning tree priority vector.The default value is disabled(2)." ::= { stpExtPortEntry 4 } stpxEdgePortAdminBpduGuardObjects OBJECT-TYPE SYNTAX INTEGER { default(0), enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the administrative BpduGuard capability is enabled on this port or not. If an edge port's bpdu guard is enable(1) ,when this port receives a BPDU, this port should be set into error-disabled state; If an edge port's bpdu guard is default(0) , this port's stpxEdgePortOperBpduGuardObjects determined in accordance with stpExtBpduGuard.The default value is default(0)." ::= { stpExtPortEntry 5 } stpxEdgePortOperBpduGuardObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the edge port's bpdu guard parameter. If stpxEdgePortAdminBpduGuardObjects is set to default(0), then the value of stpxEdgePortOperBpduGuardObjects is determined in accordance with stpExtBpduGuard." ::= { stpExtPortEntry 6 } stpxEdgePortAdminBpduFilterObjects OBJECT-TYPE SYNTAX INTEGER {default(0),enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the administrative BpduFilter capability is enabled on this port or not. If an edge port's bpdu filter is disabled(2) , this port should transmit and receive BPDUs; if an edge port's bpdu filter is enabled(1) , this port should not transmit and receive any BPDU. if an edge port's bpdu filter is default(0) , this port's stpxEdgePortOperBpduFilterObjectsisdetermined in accordance with stpExtBpduFilter.The default value is default(0)." ::= { stpExtPortEntry 7 } stpxEdgePortOperBpduFilterObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value of the edge port's bpdu filter parameter. If stpxEdgePortAdminBpduFilterObjects is set to default(0), then the value of stpxEdgePortOperBpduFilterObjects is determined in accordance with stpExtBpduFilter." ::= { stpExtPortEntry 8 } stpxForceVersionObjects OBJECT-TYPE SYNTAX INTEGER {stp(0),rstp(2),mstp(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "A Force Protocol Version parameter, controlled by management, instructs MSTP to emulate additional aspects of the behavior of earlier versions of spanning tree protocol that are not strictly required for interoperability.The value of this parameter applies to all Ports of the Bridge." ::= { stpExtPortEntry 9 } stpxLoopGuardObjects OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the LoopGuard capability is enabled on this port or not. When a port's loop guard is enabled(1) , and BPDUs are not received on a non-designated port after max_age, that port should move into the STP loop-inconsistent blocking state and should not pass user traffic. The default value is disabled(2)." ::= { stpExtPortEntry 10 } stpExtTrapEnable OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "An indication of whether spanning tree protocol trap is enabled on the device or not. The meanings of the values are: enabled(1) - Enable spanning tree protocol trap; disabled(2) - Disable spanning tree protocol trap." ::= { stpExt 7 } stpExtMaxhops OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The max hops of spanning tree protocol, its range is <1-40> and default value is 20" ::= {stpExt 8 } -- -- MIB for IEEE 802.1s Multiple Spanning Tree Protocol -- mstpExt OBJECT IDENTIFIER ::= { stpExt 10 } stpVersion OBJECT-TYPE SYNTAX INTEGER { stp(1), rstp(2), mstp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running.The value 'stpCompatible(1)' indicates the Spanning Tree Protocol specified in IEEE 802.1D-1998 ,'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and clause 17 of 802.1D-2004,'mstp(3)'indicates the Multiple Spanning Tree Protocol specified in IEEE 802.1s .The values are directly from the IEEE standard. New values may be defined as future versions of the protocol become available." -- DEFVAL INDEX { rstp } ::= { mstpExt 1 } stpRegionName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. This object does not have any default value." REFERENCE "IEEE 802.1s clause 13.7" ::= { mstpExt 2 } stpRevision OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.This object does not have any default value." REFERENCE "IEEE 802.1s: Section 13.7" ::= { mstpExt 3 } stpVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF StpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains MSTI-VLAN mapping. This release supports up to 16 instances; each spanning tree instance is identified by an instance ID that ranges from 0 to 4094. Instance 0 is mandatory and is always present." ::= { mstpExt 4 } stpVlanEntry OBJECT-TYPE SYNTAX StpVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every MST instance about the VLANs mapped to that instance." INDEX { stpVlanInstId } ::= { stpVlanTable 1 } StpVlanEntry ::= SEQUENCE { stpVlanId Integer32, stpVlanInstId Integer32 } stpVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the index to the MSTI-VLAN Table." REFERENCE "IEEE 802.1s" ::= { stpVlanEntry 1 } stpVlanInstId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifier of this MST Instance." REFERENCE "IEEE 802.1s" ::= { stpVlanEntry 2 } stpInstTable OBJECT-TYPE SYNTAX SEQUENCE OF StpInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains MST instance-specific configuration and operational information." ::= { mstpExt 5 } stpInstEntry OBJECT-TYPE SYNTAX StpInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every mst instance about the STP topology for that instance." INDEX { stpInstId } ::= { stpInstTable 1 } StpInstEntry ::= SEQUENCE { stpInstId Integer32, stpPriority Integer32, stpInstDesignatedRoot BridgeId, stpInstRootCost Integer32, stpInstRootPort Integer32 } stpInstId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier of this MST Instance. MST establishes and maintains additional spanning trees withineach MST region. These spanning trees are referred to as MST instances (MSTIs)." REFERENCE "IEEE 802.1s" ::= { stpInstEntry 1 } stpPriority OBJECT-TYPE SYNTAX Integer32 (0..61440) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower the priority of the bridge, the higher likelihood of the bridge becoming a root bridge or a designated bridge for the LAN. The permitted range of values is 0-61440. The priority values must be in multiples of 4096." REFERENCE "IEEE 802.1s: Section 13.23.2" -- DEFVAL { 32768 } ::= { stpInstEntry 2 } stpInstDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the root of the corresponding spanning tree instance as determined by the Spanning Tree Protocol for that instance. This value is used as the CIST Root Identifier or MSTI regional root identifier parameter in all MST BPDUs originated by this node." REFERENCE "IEEE 802.1s: Section 13.23.6, 13.23.12" ::= { stpInstEntry 3 } stpInstRootCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cost of the path to the root as seen from this bridge for this instance." REFERENCE "IEEE 802.1s: Section 13.23.6, 13.23.12" ::= { stpInstEntry 4 } stpInstRootPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge for this instance." REFERENCE "IEEE 802.1s: Section 13.23.6, 13.23.12" ::= { stpInstEntry 5 } stpInstPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StpInstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains MST port and instance information." ::= { mstpExt 6 } stpInstPortEntry OBJECT-TYPE SYNTAX StpInstPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every MST port for each MST instance it belongs to about the Spanning Tree Protocol state for that port." INDEX { stpInstId, stpxpPortIndex } ::= { stpInstPortTable 1 } StpInstPortEntry ::= SEQUENCE { stpInstPortPriority Integer32, stpInstPortState INTEGER, stpInstPortPathCost Integer32, stpInstPortDesignatedRoot BridgeId, stpInstPortDesignatedCost Integer32, stpInstPortDesignatedBridge BridgeId, stpInstPortDesignatedPort InterfaceIndex, stpInstPortRole INTEGER, stpInstRestrictedRole INTEGER, stpInstRestrictedTcn INTEGER } stpInstPortPriority OBJECT-TYPE SYNTAX Integer32 (0..240) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the priority field which is contained in the most significant 4 bits of the first (in network byte order) octet of the (2 octet long) Port ID.As it is contained only in 4 bits, the value has to be a multiple of 16.The other octet of the Port ID is given by the value of stpInstPortIndex." REFERENCE "IEEE 802.1s: Section 13.24.21 " ::= { stpInstPortEntry 1 } stpInstPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), discarding(2), learning(3), forwarding(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port'scurrent state as defined by application of the Spanning Tree Protocol.This state controls what action a port takes on reception of a frame.For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1)." REFERENCE "IEEE 802.1s: Section 13.16" ::= { stpInstPortEntry 2 } stpInstPortPathCost OBJECT-TYPE SYNTAX Integer32 (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port.802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Path cost in range .(802.1t:1-200000000, 802.1d-1998:1-65535)." REFERENCE "IEEE 802.1s: Section 13.24.8, 13.24.17" ::= { stpInstPortEntry 3 } stpInstPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." REFERENCE "IEEE 802.1s: Section 13.24.4, 13.24.11" ::= { stpInstPortEntry 4 } stpInstPortDesignatedCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The path cost of the Designated Port of the segment connected to this port.This value is compared to the Root Path Cost field in received bridge PDUs." REFERENCE "IEEE 802.1s: Section 13.24.4, 13.24.11" ::= { stpInstPortEntry 5 } stpInstPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1s: Section 13.24.4, 13.24.11" ::= { stpInstPortEntry 6 } stpInstPortDesignatedPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1s: Section 13.24.4, 13.24.11" ::= { stpInstPortEntry 7 } stpInstPortRole OBJECT-TYPE SYNTAX INTEGER { master(0), alternate(1), root(2), designated(3), disabled(4), backup(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The role of the port.As per IEEE 802.1s, the port can have any of the following roles: Disabled, Root, Designated, Alternate, Backup, Master." REFERENCE "IEEE 802.1s: Section 13.24.25" ::= { stpInstPortEntry 8 } stpInstRestrictedRole OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the RestrictedRole capability is enabled on this port or not. If restricted Role is enabled(1) on a port,this Port should not to be selected as Root Port ; even it has the best spanning tree priority vector.The default value is disabled(2)." ::= { stpInstPortEntry 9 } stpInstRestrictedTcn OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the RestrictedTcn capability is enabled on this port or not. If restricted TCN is enabled(1) on a port , this port should not propagate received topology change notifications and topology changes to other Ports.The default value is disabled(2)." ::= { stpInstPortEntry 10 } stpInstNum OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of mst configured instances." ::= { mstpExt 7 } stpDigests OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of MST Configuration Identification." ::= { mstpExt 8 } -- Sub Module: IGMPEXT igmpRouterInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpRouterInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of interface entry." ::= { igmpExt 1 } igmpRouterInterfaceExtEntry OBJECT-TYPE SYNTAX IgmpRouterInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "igmp router interface entry." INDEX { igmpRouterIfIndex, igmpRouterQuerierType} ::= { igmpRouterInterfaceExtTable 1 } IgmpRouterInterfaceExtEntry ::= SEQUENCE { igmpRouterIfIndex Integer32, igmpRouterQuerierType Integer32, igmpRouterIfGroupLimit Integer32, igmpRouterIfImmediateLeaveAccess OCTET STRING, igmpRouterIfProxyService TruthValue, igmpRouterIfAccess OCTET STRING, igmpRouterIfQuerierTimeout Integer32, igmpRouterIfGroupLimitExceptAccess OCTET STRING, igmpRouterIfClearGrp INTEGER } igmpRouterIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "igmp router Interface index." ::= { igmpRouterInterfaceExtEntry 1 } igmpRouterQuerierType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "igmp router Interface querier type: ipv4 or ipv6." ::= { igmpRouterInterfaceExtEntry 2 } igmpRouterIfGroupLimit OBJECT-TYPE SYNTAX Integer32(1..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "igmp router Interface group limit." ::= { igmpRouterInterfaceExtEntry 3 } igmpRouterIfImmediateLeaveAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Leave groups immediately without sending last member query, use for one host network only." ::= { igmpRouterInterfaceExtEntry 4 } igmpRouterIfProxyService OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Igmp router Interface proxy service . True(1),False(2)." ::= { igmpRouterInterfaceExtEntry 5 } igmpRouterIfAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "igmp router Interface IGMP group access group." ::= { igmpRouterInterfaceExtEntry 6 } igmpRouterIfQuerierTimeout OBJECT-TYPE SYNTAX Integer32(60..300) MAX-ACCESS read-write STATUS current DESCRIPTION "igmp router Interface IGMP previous querier timeout." DEFVAL { 255 } ::= { igmpRouterInterfaceExtEntry 7 } igmpRouterIfGroupLimitExceptAccess OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "igmp router Interface IGMP group access group, Groups not to be counted." ::= { igmpRouterInterfaceExtEntry 8 } igmpRouterIfClearGrp OBJECT-TYPE SYNTAX INTEGER { noUse(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete IGMP group cache entries." ::= { igmpRouterInterfaceExtEntry 9 } igmpRouterGobalGrpLimit OBJECT-TYPE SYNTAX Integer32(1..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "Igmp router global group limit." ::= { igmpExt 2 } igmpRouterSsmMappingEnable OBJECT-TYPE SYNTAX INTEGER { disable(2), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of ssm mapping .enable(1), disable(2). Default setting is disable(2)." DEFVAL { disable } ::= { igmpExt 3 } igmpRouterSsmMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpRouterSsmMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure ssm mapping list. using acl to map to specified source" ::= { igmpExt 4 } igmpRouterSsmMappingEntry OBJECT-TYPE SYNTAX IgmpRouterSsmMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of igmpRouterSsmMappingTable." INDEX { igmpRouterSsmMappingAclName, igmpRouterSsmMappingSourceAddress} ::= { igmpRouterSsmMappingTable 1 } IgmpRouterSsmMappingEntry ::= SEQUENCE { igmpRouterSsmMappingIndex INTEGER, igmpRouterSsmMappingSourceAddress IpAddress, igmpRouterSsmMappingAclName OCTET STRING, igmpRouterSsmMappingRowStatus RowStatus } igmpRouterSsmMappingIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "index of group list mapping (1~32)" ::= { igmpRouterSsmMappingEntry 1 } igmpRouterSsmMappingSourceAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "source address which group list mapping to" ::= { igmpRouterSsmMappingEntry 2 } igmpRouterSsmMappingAclName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "acl name of group list " ::= { igmpRouterSsmMappingEntry 3 } igmpRouterSsmMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { igmpRouterSsmMappingEntry 4 } -- Sub Module: BOARDHEALTHYMONITOR -- -- Textual conventions -- SysmonBootType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify the place to boot to." SYNTAX INTEGER { hold(0), reload(1) } HBMReactivateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify the type to reactive." SYNTAX INTEGER { warning(0), shutdown(1), reload(2) } -- -- Node definitions -- --sysmon OBJECT IDENTIFIER ::= { boardHealthyMonitor 1 } sysmonEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of sysmon .enable(1), disable(2). Default setting is enable(1)." ::= { boardHealthyMonitor 1 } heartBeatMonitor OBJECT IDENTIFIER ::= { boardHealthyMonitor 2 } heartBeatMonitorEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The state of heart-beat-monitor. enable(1), disable(2). Default setting is enable(1)" ::= { heartBeatMonitor 1 } heartBeatMonitorReactivate OBJECT-TYPE SYNTAX HBMReactivateType MAX-ACCESS read-write STATUS current DESCRIPTION "The reactive type of heart-beat-monitor.warning(0), shutdown(1), reload(2). Default setting is reload(2). " DEFVAL { reload } ::= { heartBeatMonitor 2 } lastDumpedProcess OBJECT-TYPE SYNTAX INTEGER(1..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "The process id of last dumped process." ::= { boardHealthyMonitor 3 } -- Sub Module: ARPINSP -- arp type value ArpType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "arp's type, request or response." SYNTAX INTEGER { request(1), response(2), all(3) } -- -- Node of arpAclGroupTable -- arpAclGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpAclGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure arp access list." ::= { arpInsp 1 } arpAclGroupEntry OBJECT-TYPE SYNTAX ArpAclGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the index of arpAclGroupTable." INDEX { arpAclGroupIndex } ::= { arpAclGroupTable 1 } ArpAclGroupEntry ::= SEQUENCE { arpAclGroupIndex Integer32, arpAclGroupName OCTET STRING, arpAclGroupRowStatus RowStatus } arpAclGroupIndex OBJECT-TYPE SYNTAX Integer32 (30001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of arp acl group." ::= { arpAclGroupEntry 1 } arpAclGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of arp acl group." ::= { arpAclGroupEntry 2 } arpAclGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { arpAclGroupEntry 3 } -- -- Nodes of arpAclRuleTable -- arpAclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ARP acl rules." ::= { arpInsp 2 } arpAclRuleEntry OBJECT-TYPE SYNTAX ArpAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arp acl rules information." INDEX { arpAclIndex, arpAclRuleIndex } ::= { arpAclRuleTable 1 } ArpAclRuleEntry ::= SEQUENCE { arpAclIndex Integer32, arpAclRuleIndex Integer32, arpAclAct RuleAction, arpType ArpType, arpSenderIp IpAddress, arpSenderIpWild IpAddress, arpSenderMac OCTET STRING, arpSenderMacWild OCTET STRING, arpAclLog TruthValue, arpAclRowStatus RowStatus } arpAclIndex OBJECT-TYPE SYNTAX Integer32 (30001..40000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of arp acl group." ::= { arpAclRuleEntry 1 } arpAclRuleIndex OBJECT-TYPE SYNTAX Integer32 (1..131071) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The rule index of arp acl rule." ::= { arpAclRuleEntry 2 } arpAclAct OBJECT-TYPE SYNTAX RuleAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action of arp acl rule. permit(1), deny(2)." ::= { arpAclRuleEntry 3 } arpType OBJECT-TYPE SYNTAX ArpType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of arp: request or response or all. request(1), response(2), all(3)." ::= { arpAclRuleEntry 4 } arpSenderIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The ARP sender IP adress." ::= { arpAclRuleEntry 5 } arpSenderIpWild OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The ARP sender IP adress's wild." ::= { arpAclRuleEntry 6 } arpSenderMac OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The ARP sender mac adress." ::= { arpAclRuleEntry 7 } arpSenderMacWild OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The ARP sender mac adress's wild ." ::= { arpAclRuleEntry 8 } arpAclLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "record the log when being matched. true(1), false(2)." ::= { arpAclRuleEntry 9 } arpAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { arpAclRuleEntry 10 } -- -- Nodes of arpAclApplyTable -- arpAclApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpAclApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ARP acl applying." ::= { arpInsp 3 } arpAclApplyEntry OBJECT-TYPE SYNTAX ArpAclApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arp acl applying information." INDEX { arpAclApplyVid } ::= { arpAclApplyTable 1 } ArpAclApplyEntry ::= SEQUENCE { arpAclApplyVid Integer32, arpAclApplyName OCTET STRING, arpAclApplyStatic TruthValue, arpAclApplyRowStatus RowStatus } arpAclApplyVid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan id of arp acl applied." ::= { arpAclApplyEntry 1 } arpAclApplyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The applied arp acl name." ::= { arpAclApplyEntry 2 } arpAclApplyStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The arp acl applied type is static. true(1), false(2)." DEFVAL{false} ::= { arpAclApplyEntry 3 } arpAclApplyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { arpAclApplyEntry 4 } -- -- Nodes of arpInspValidateDestMac -- arpInspValidateDestMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "whether do Validation of arp's dest-mac. true(1), false(2)." ::= { arpInsp 4 } -- -- Nodes of arpInspValidateIP -- arpInspValidateIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "whether do Validation of arp's IP. true(1), false(2)." ::= { arpInsp 5 } -- -- Nodes of arpInspValidateSrcMac -- arpInspValidateSrcMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "whether do Validation of arp's src-mac. true(1), false(2)." ::= { arpInsp 6 } -- -- Nodes of arpInspEnableTable -- arpInspEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ARP Inspection Enable." ::= { arpInsp 7 } arpInspEnableEntry OBJECT-TYPE SYNTAX ArpInspEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arp inspection enable information." INDEX { arpInspEnVid } ::= { arpInspEnableTable 1 } ArpInspEnableEntry ::= SEQUENCE { arpInspEnVid Integer32, arpInspEnableRowStatus RowStatus } arpInspEnVid OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan id, which enables arp inspection." ::= { arpInspEnableEntry 1 } arpInspEnableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { arpInspEnableEntry 2 } -- -- Nodes of arpInspIfTrustTable -- arpInspIfTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspIfTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ARP trust interface." ::= { arpInsp 8 } arpInspIfTrustEntry OBJECT-TYPE SYNTAX ArpInspIfTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP trust interface information." INDEX { arpInspTrustIfindex } ::= { arpInspIfTrustTable 1 } ArpInspIfTrustEntry ::= SEQUENCE { arpInspTrustIfindex Integer32, arpInspTrustRowStatus RowStatus } arpInspTrustIfindex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex." ::= { arpInspIfTrustEntry 1 } arpInspTrustRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { arpInspIfTrustEntry 2 } -- -- Nodes of arpInspLogbuffEntries -- arpInspLogbuffEntries OBJECT-TYPE SYNTAX Integer32 (10..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of entries for log buffer. Range 10~1024. Default value is 32." DEFVAL { 32 } ::= { arpInsp 9 } -- -- Nodes of arpInspLogbuffLogsTable -- arpInspLogbuffLogsTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpInspLogbuffLogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ARP Inspection log buff logs." ::= { arpInsp 10 } arpInspLogbuffLogsEntry OBJECT-TYPE SYNTAX ArpInspLogbuffLogsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ARP log buff logs information." INDEX { arpInspLogbuffLogs } ::= { arpInspLogbuffLogsTable 1 } ArpInspLogbuffLogsEntry ::= SEQUENCE { arpInspLogbuffLogs Integer32, arpInspLogbuffInterval Integer32, arpInspLogbuffRowStatus RowStatus } arpInspLogbuffLogs OBJECT-TYPE SYNTAX Integer32 (0..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of logs per interval. Range 0~1024. Default value is 5." DEFVAL { 5 } ::= { arpInspLogbuffLogsEntry 1 } arpInspLogbuffInterval OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-create STATUS current DESCRIPTION "Interval for controlling logging rate. Range 0~86400. Default value is 1." DEFVAL { 1 } ::= { arpInspLogbuffLogsEntry 2 } arpInspLogbuffRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { arpInspLogbuffLogsEntry 3 } pimsmMibObject OBJECT-IDENTITY STATUS current DESCRIPTION "Description." ::= { pimsmExt 1 } pimInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF PimInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of pim interface extension entry." ::= { pimsmMibObject 1 } pimInterfaceExtEntry OBJECT-TYPE SYNTAX PimInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim sm interface extension entry" INDEX { pimInterfaceIfIndex, pimInterfaceIPVersion} ::= { pimInterfaceExtTable 1 } PimInterfaceExtEntry ::= SEQUENCE { pimInterfaceIfIndex Integer32, pimInterfaceIPVersion Integer32, pimInterfaceExcludeGenid TruthValue, pimInterfaceNeighborFilter OCTET STRING, pimInterfaceUnicastBsm TruthValue } pimInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim Interface index." ::= { pimInterfaceExtEntry 1 } pimInterfaceIPVersion OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim interface IP version" ::= { pimInterfaceExtEntry 2 } pimInterfaceExcludeGenid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Exclude gen-id option from PIM hello packets on this interface" ::= { pimInterfaceExtEntry 3 } pimInterfaceNeighborFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "PIM peering filter" ::= { pimInterfaceExtEntry 4 } pimInterfaceUnicastBsm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Enable sending and receiving of unicast BSM for backward compatibility" ::= { pimInterfaceExtEntry 5 } pimAcceptRegisterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Register accept filter at RP" ::= { pimsmMibObject 2 } pimIgnoreRpSetPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ignore RP set priority value.enable(1),disable(2)." ::= { pimsmMibObject 3 } pimCiscoRegisterChecksum OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Calculate register checksum over whole packet (Cisco compatibility).enable(1),disable(2)." ::= { pimsmMibObject 4 } pimJpTimer OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Join/Prune timer" ::= { pimsmMibObject 5 } pimRegisterRateLimit OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit for PIM registers, Packets per second" ::= { pimsmMibObject 6 } pimRegisterRpReachability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Enable RP reachability check for PIM registers" ::= { pimsmMibObject 7 } pimRegisterSource OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION " Source address for PIM register" ::= { pimsmMibObject 8 } pimRegisterSuppression OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Register suppression for PIM registers" ::= { pimsmMibObject 9 } pimRpRegisterKat OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "KAT for (S,G) at RP from PIM registers: KAT time in secs" ::= { pimsmMibObject 10 } pimSptSwitchThresholdInfinity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Source-tree switching threshold Never switch" ::= { pimsmMibObject 11 } pimSptSwitchThresholdInfinityList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Source-tree switching threshold Never switch list" ::= { pimsmMibObject 12 } pimBsrCandidate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Candidate bootstrap router (candidate BSR)" ::= { pimsmMibObject 13 } pimSsmDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Set SSM range as default. enable(1), disable(2). Default setting is disable(2)." ::= { pimsmMibObject 14 } pimSsmRange OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set SSM range to group list by acl" ::= { pimsmMibObject 15 } pimMcastPimSmAdminMode OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "PIM SM administrative mode enable. Always enable. set value: (1)enable (2)disable" ::= { pimsmMibObject 16 } pimSwitchIPRoutingMode OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "IP Routing administrative mode enable. Always enable. set value: (1)enable (2)disable" ::= { pimsmMibObject 17 } pimIfMcastEnableExtTable OBJECT-TYPE SYNTAX SEQUENCE OF PimIfMcastEnableExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of pim interface mcast enable extension entry." ::= { pimsmMibObject 18 } pimIfMcastEnableExtEntry OBJECT-TYPE SYNTAX PimIfMcastEnableExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim sm interface extension entry" INDEX { pimIfMcastEnableIfIndex, pimIfMcastEnableIPVersion} ::= { pimIfMcastEnableExtTable 1 } PimIfMcastEnableExtEntry ::= SEQUENCE { pimIfMcastEnableIfIndex Integer32, pimIfMcastEnableIPVersion Integer32, pimIfMcastEnable Integer32, pimIfMcastEnableState Integer32 } pimIfMcastEnableIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim Interface index." ::= { pimIfMcastEnableExtEntry 1 } pimIfMcastEnableIPVersion OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "pim interface IP version.IPv4(1),IPv6(2)." ::= { pimIfMcastEnableExtEntry 2 } pimIfMcastEnable OBJECT-TYPE SYNTAX Integer32 (4..6) MAX-ACCESS read-write STATUS current DESCRIPTION "pim Interface multicast enable. set value: (4)set (6)unset" ::= { pimIfMcastEnableExtEntry 3 } pimIfMcastEnableState OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "pim Interface multicast enable. set value: (1)active (2)inactive" ::= { pimIfMcastEnableExtEntry 4 } -- Sub Module: OSPFEXT ospfExtProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of process entry. The the 0 index is used by default vrf, if the index is 0, the ospfExtProcessVrfName is invalid." ::= { ospfExt 1 } ospfExtProcessEntry OBJECT-TYPE SYNTAX OspfExtProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ospf process entry." INDEX { ospfExtProcessIndex} ::= { ospfExtProcessTable 1 } OspfExtProcessEntry ::= SEQUENCE { ospfExtProcessIndex Integer32, ospfExtProcessVrfName OCTET STRING, ospfExtProcessRowStatus RowStatus, ospfExtProcessLsaSummaryRouterCount Integer32, ospfExtProcessLsaSummaryRouterMaxAge Integer32, ospfExtProcessLsaSummaryNetworkCount Integer32, ospfExtProcessLsaSummaryNetworkMaxAge Integer32, ospfExtProcessLsaSummaryNetCount Integer32, ospfExtProcessLsaSummaryNetMaxAge Integer32, ospfExtProcessLsaSummaryASBRCount Integer32, ospfExtProcessLsaSummaryASBRMaxAge Integer32, ospfExtProcessLsaSummaryType5ExtCount Integer32, ospfExtProcessLsaSummaryType5ExtMaxAge Integer32, ospfExtProcessLsaSummaryAttributeCount Integer32, ospfExtProcessLsaSummaryAttributeMaxAge Integer32, ospfExtProcessLsaSummaryOpaqueLinkCount Integer32, ospfExtProcessLsaSummaryOpaqueLinkMaxAge Integer32, ospfExtProcessLsaSummaryOpaqueProcessCount Integer32, ospfExtProcessLsaSummaryOpaqueProcessMaxAge Integer32, ospfExtProcessLsaSummaryOpaqueASCount Integer32, ospfExtProcessLsaSummaryOpaqueASMaxAge Integer32, ospfExtProcessRouteSummaryConnectedCount Integer32, ospfExtProcessRouteSummaryDiscardCount Integer32, ospfExtProcessRouteSummaryIntraAreaCount Integer32, ospfExtProcessRouteSummaryInterAreaCount Integer32, ospfExtProcessRouteSummaryExtType1Count Integer32, ospfExtProcessRouteSummaryExtType2Count Integer32, ospfExtProcessRouteSummaryN1Count Integer32, ospfExtProcessRouteSummaryN2Count Integer32 } ospfExtProcessIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ospf index." ::= { ospfExtProcessEntry 1 } ospfExtProcessVrfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "VRF Name to associate with this ospf." ::= { ospfExtProcessEntry 2 } ospfExtProcessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtProcessEntry 3 } ospfExtProcessLsaSummaryRouterCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf router LSA count for specified process." ::= { ospfExtProcessEntry 4 } ospfExtProcessLsaSummaryRouterMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf router LSA count in max age status for specified process." ::= { ospfExtProcessEntry 5 } ospfExtProcessLsaSummaryNetworkCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf network LSA count for specified process." ::= { ospfExtProcessEntry 6 } ospfExtProcessLsaSummaryNetworkMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf network LSA count in max age status for specified process." ::= { ospfExtProcessEntry 7 } ospfExtProcessLsaSummaryNetCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary net LSA count for specified process." ::= { ospfExtProcessEntry 8 } ospfExtProcessLsaSummaryNetMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary net LSA count in max age status for specified process." ::= { ospfExtProcessEntry 9 } ospfExtProcessLsaSummaryASBRCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary ASBR LSA count for specified process." ::= { ospfExtProcessEntry 10 } ospfExtProcessLsaSummaryASBRMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary ASBR LSA count in max age status for specified process." ::= { ospfExtProcessEntry 11 } ospfExtProcessLsaSummaryType5ExtCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf type-5 Ext LSA count for specified process." ::= { ospfExtProcessEntry 12 } ospfExtProcessLsaSummaryType5ExtMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf type-5 Ext LSA count in max age status for specified process." ::= { ospfExtProcessEntry 13 } ospfExtProcessLsaSummaryAttributeCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf attribute LSA count for specified process." ::= { ospfExtProcessEntry 14 } ospfExtProcessLsaSummaryAttributeMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf attribute LSA count in max age status for specified process." ::= { ospfExtProcessEntry 15 } ospfExtProcessLsaSummaryOpaqueLinkCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque link LSA count for specified process." ::= { ospfExtProcessEntry 16 } ospfExtProcessLsaSummaryOpaqueLinkMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque link LSA count in max age status for specified process." ::= { ospfExtProcessEntry 17 } ospfExtProcessLsaSummaryOpaqueProcessCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque area LSA count for specified process." ::= { ospfExtProcessEntry 18 } ospfExtProcessLsaSummaryOpaqueProcessMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque area LSA count in max age status for specified process." ::= { ospfExtProcessEntry 19 } ospfExtProcessLsaSummaryOpaqueASCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque AS LSA count for specified process." ::= { ospfExtProcessEntry 20 } ospfExtProcessLsaSummaryOpaqueASMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Ospf opaque AS LSA count in max age status for specified process." ::= { ospfExtProcessEntry 21 } ospfExtProcessRouteSummaryConnectedCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf connected route count for specified process." ::= { ospfExtProcessEntry 22 } ospfExtProcessRouteSummaryDiscardCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf black-hole route count for specified process." ::= { ospfExtProcessEntry 23 } ospfExtProcessRouteSummaryIntraAreaCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf intra area route count for specified process." ::= { ospfExtProcessEntry 24 } ospfExtProcessRouteSummaryInterAreaCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf inter area route count for specified process." ::= { ospfExtProcessEntry 25 } ospfExtProcessRouteSummaryExtType1Count OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf Ext type 1 route count for specified process." ::= { ospfExtProcessEntry 26 } ospfExtProcessRouteSummaryExtType2Count OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf Ext type 2 route count for specified process." ::= { ospfExtProcessEntry 27 } ospfExtProcessRouteSummaryN1Count OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf N1 route count for specified process." ::= { ospfExtProcessEntry 28 } ospfExtProcessRouteSummaryN2Count OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf N2 route count for specified process." ::= { ospfExtProcessEntry 29 } ospfExtBinding OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Binding ospf process to mib." ::= { ospfExt 2 } ospfExtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of if entry." ::= { ospfExt 3 } ospfExtIfEntry OBJECT-TYPE SYNTAX OspfExtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login entry." INDEX { ospfExtIfIpAddress, ospfExtAddressLessIf} ::= { ospfExtIfTable 1 } OspfExtIfEntry ::= SEQUENCE { ospfExtIfIpAddress IpAddress, ospfExtAddressLessIf Integer32, ospfExtIfMtu Integer32, ospfExtIfCost Integer32, ospfExtIfOutgoingLSA INTEGER, ospfExtIfMtuIgnore INTEGER, -- modified by liuht for bug 23735 in 2013-07-08 -- ospfExtIfType -- INTEGER, -- ospfExtIfDisable -- INTEGER, ospfExtIfAuth INTEGER, ospfExtIfDeadInterval Integer32, ospfExtIfHelloInterval Integer32, ospfExtIfPri Integer32, ospfExtIfRetransInterval Integer32, ospfExtIfTransDelay Integer32, ospfExtIfDRRouterId IpAddress, ospfExtIfBackupDRRouterId IpAddress, ospfExtIfDbFilterFlag INTEGER, ospfExtIfHelloDue OCTET STRING, ospfExtIfNeighborCount Gauge32, ospfExtIfAdjacentNeighborCount Gauge32, ospfExtIfCryptSequenceNumber Gauge32, ospfExtIfHelloRecv Gauge32, ospfExtIfHelloSend Gauge32, ospfExtIfDDRecv Gauge32, ospfExtIfDDSend Gauge32, ospfExtIfLSReqRecv Gauge32, ospfExtIfLSReqSend Gauge32, ospfExtIfLSUpdRecv Gauge32, ospfExtIfLSUpdSend Gauge32, ospfExtIfLsAckRecv Gauge32, ospfExtIfLsAckSend Gauge32, ospfExtIfLsAckDiscard Gauge32, ospfExtIfTeMetric Integer32 } ospfExtIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of this OSPF interface." ::= { ospfExtIfEntry 1 } ospfExtAddressLessIf OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address." ::= { ospfExtIfEntry 2 } ospfExtIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF interface MTU.The range is 576-65535 and the default value is 1500." ::= { ospfExtIfEntry 3 } ospfExtIfCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF interface MTU.The range is 1-65535 and the default value is 1." ::= { ospfExtIfEntry 4 } ospfExtIfOutgoingLSA OBJECT-TYPE SYNTAX INTEGER { unset(1), set(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Filter OSPF LSA during synchronization and flooding." ::= { ospfExtIfEntry 5 } ospfExtIfMtuIgnore OBJECT-TYPE SYNTAX INTEGER { unset(1), set(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ignores the MTU in DBD packets." ::= { ospfExtIfEntry 6 } -- modified by liuht for bug 23735 in 2013-07-08 --ospfExtIfType OBJECT-TYPE -- SYNTAX INTEGER -- { -- pointToPoint(1), -- broadcast(2), -- nonBroadcast(3), -- pointToMultipoint(4), -- pointToMultipointAndNonBroadcast(5), -- none(6) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The OSPF interface type." -- ::= { ospfExtIfEntry 7 } --ospfExtIfDisable OBJECT-TYPE -- SYNTAX INTEGER -- { -- disable(1), -- enable(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Disable OSPF." -- ::= { ospfExtIfEntry 8 } ospfExtIfAuth OBJECT-TYPE SYNTAX INTEGER { noAuthentication(0), simple(1), message-digest(2), unset(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Display authentication type." ::= { ospfExtIfEntry 9 } ospfExtIfDeadInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF dead interval, the default value is: 40(broadcast), 120(non-broadcast), 120(pointToMultipoint), 40(pointToPoint), 120(pointToMultipointAndNonBroadcast).." ::= { ospfExtIfEntry 10 } ospfExtIfHelloInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF hello interval, the default value is: 10(broadcast), 30(non-broadcast), 30(pointToMultipoint), 10(pointToPoint), 30(pointToMultipointAndNonBroadcast)." ::= { ospfExtIfEntry 11 } ospfExtIfPri OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF priority, the default value is 1." ::= { ospfExtIfEntry 12 } ospfExtIfRetransInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF retransmit interval, the default value is 5." ::= { ospfExtIfEntry 13 } ospfExtIfTransDelay OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The OSPF transmit delay, the default value is 1." ::= { ospfExtIfEntry 14 } ospfExtIfDRRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The designated router id of this OSPF interface." ::= { ospfExtIfEntry 15 } ospfExtIfBackupDRRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The backup designated router id of this OSPF interface." ::= { ospfExtIfEntry 16 } ospfExtIfDbFilterFlag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The database filter flag of this OSPF interface." ::= { ospfExtIfEntry 17 } ospfExtIfHelloDue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hello due time of this OSPF interface." ::= { ospfExtIfEntry 18 } ospfExtIfNeighborCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighbor count of this OSPF interface." ::= { ospfExtIfEntry 19 } ospfExtIfAdjacentNeighborCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The adjacent neighbor count id of this OSPF interface." ::= { ospfExtIfEntry 20 } ospfExtIfCryptSequenceNumber OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The crypt sequence number of this OSPF interface." ::= { ospfExtIfEntry 21 } ospfExtIfHelloRecv OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The hello recieved count of this OSPF interface." ::= { ospfExtIfEntry 22 } ospfExtIfHelloSend OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The hello send count of this OSPF interface." ::= { ospfExtIfEntry 23 } ospfExtIfDDRecv OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The DD recieved count of this OSPF interface." ::= { ospfExtIfEntry 24 } ospfExtIfDDSend OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The DD send count of this OSPF interface." ::= { ospfExtIfEntry 25 } ospfExtIfLSReqRecv OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS req recieved count of this OSPF interface." ::= { ospfExtIfEntry 26 } ospfExtIfLSReqSend OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS req send count id of this OSPF interface." ::= { ospfExtIfEntry 27 } ospfExtIfLSUpdRecv OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS update recieved count of this OSPF interface." ::= { ospfExtIfEntry 28 } ospfExtIfLSUpdSend OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS update send count of this OSPF interface." ::= { ospfExtIfEntry 29 } ospfExtIfLsAckRecv OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS ack recieved count of this OSPF interface." ::= { ospfExtIfEntry 30 } ospfExtIfLsAckSend OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS ack send count of this OSPF interface." ::= { ospfExtIfEntry 31 } ospfExtIfLsAckDiscard OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The LS ack discard count of this OSPF interface." ::= { ospfExtIfEntry 32 } --for bug 23740, 3.2 unsupport this node ospfExtIfTeMetric OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "OSPF TE metric value." ::= { ospfExtIfEntry 33 } ospfExtAreaStubTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAreaStubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of area stub entry." ::= { ospfExt 4 } ospfExtAreaStubEntry OBJECT-TYPE SYNTAX OspfExtAreaStubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area stub entry." INDEX { ospfExtAreaStubStat} ::= { ospfExtAreaStubTable 1 } OspfExtAreaStubEntry ::= SEQUENCE { ospfExtAreaStubStat RowStatus, ospfExtAreaStubNoSummary INTEGER } ospfExtAreaStubStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtAreaStubEntry 1 } ospfExtAreaStubNoSummary OBJECT-TYPE SYNTAX INTEGER { noSummary(1), summary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do not inject inter-area routes into stub." ::= { ospfExtAreaStubEntry 2 } ospfExtFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of area stub entry." ::= { ospfExt 5 } ospfExtFilterEntry OBJECT-TYPE SYNTAX OspfExtFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area stub entry." INDEX { ospfExtFilterId} ::= { ospfExtFilterTable 1 } OspfExtFilterEntry ::= SEQUENCE { ospfExtFilterId Integer32, ospfExtFilterPrefixIn OCTET STRING, ospfExtFilterPrefixOut OCTET STRING, ospfExtFilterAccessIn OCTET STRING, ospfExtFilterAccessOut OCTET STRING } ospfExtFilterId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 32-bit integer uniquely identifying an area." ::= { ospfExtFilterEntry 1 } ospfExtFilterPrefixIn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of an IP prefix-list.Max length is 20." ::= { ospfExtFilterEntry 2 } ospfExtFilterPrefixOut OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of an IP prefix-list.Max length is 20." ::= { ospfExtFilterEntry 3 } ospfExtFilterAccessIn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of an access-list.Max length is 20." ::= { ospfExtFilterEntry 4 } ospfExtFilterAccessOut OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of an access-list.Max length is 20." ::= { ospfExtFilterEntry 5 } ospfExtSummaryAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtSummaryAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of summary address entry." ::= { ospfExt 6 } ospfExtSummaryAddrEntry OBJECT-TYPE SYNTAX OspfExtSummaryAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "summary address entry " INDEX { ospfExtSummaryAddrStat} ::= { ospfExtSummaryAddrTable 1 } OspfExtSummaryAddrEntry ::= SEQUENCE { ospfExtSummaryAddrStat RowStatus, ospfExtSummaryAddrNotAdvertise INTEGER, ospfExtSummaryAddrTag Gauge32, ospfExtSummaryAddrMetric Gauge32, ospfExtSummaryAddrMetricType INTEGER } ospfExtSummaryAddrStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtSummaryAddrEntry 1 } ospfExtSummaryAddrNotAdvertise OBJECT-TYPE SYNTAX INTEGER { noAdvertise(1), advertise(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Suppress routes that match the prefix." ::= { ospfExtSummaryAddrEntry 2 } ospfExtSummaryAddrTag OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Set tag (0-4294967295)." ::= { ospfExtSummaryAddrEntry 3 } ospfExtSummaryAddrMetric OBJECT-TYPE SYNTAX Gauge32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary address metric value." ::= { ospfExtSummaryAddrEntry 4 } ospfExtSummaryAddrMetricType OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF summary address metic type, the default value is 2, 0 means unspecified." ::= { ospfExtSummaryAddrEntry 5 } ospfExtProperty OBJECT IDENTIFIER ::= { ospfExt 7 } compatibleRfc OBJECT-TYPE SYNTAX INTEGER { uncompatible(1), compatible(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This should always write running-config to startup-config. And the valid value is 1." ::= { ospfExtProperty 1 } timersSpfDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay between receiving a change to SPF calculation. The range is 0-2147483647.Default value is 5." ::= { ospfExtProperty 2 } timersSpfHold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Hold time between consecutive SPF calculations. The range is 0-2147483647.Default value is 10." ::= { ospfExtProperty 3 } refreshTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Adjust refresh parameters.The range is 10-1800.Default value is 10." ::= { ospfExtProperty 4 } referBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Use reference bandwidth method to assign OSPF cost. The range is 1-4294967.Default value is 100." ::= { ospfExtProperty 5 } maxConcurrentDd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number allowed to process DD concurrently. The range is 1-65535.Default value is 5." ::= { ospfExtProperty 6 } maximumArea OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of ospf area.The range is 1-4294967294.Default value is 3000." ::= { ospfExtProperty 7 } defaultMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set metric of redistributed routes.The range is 0-16777214.The unset value is -1." ::= { ospfExtProperty 8 } distance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF Administrative distance.The range is 1-255.The unset value is -1." ::= { ospfExtProperty 9 } distanceIntra OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for intra-area routes.The range is 1-255.The unset value is -1." ::= { ospfExtProperty 10 } distanceInter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for inter-area routes.The range is 1-255. The unset value is -1." ::= { ospfExtProperty 11 } distanceExternal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for external routes.The range is 1-255.The unset value is -1." ::= { ospfExtProperty 12 } ospfExtNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of neighbour entry." ::= { ospfExt 8 } ospfExtNeighborEntry OBJECT-TYPE SYNTAX OspfExtNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "neighbour address entry." INDEX { ospfExtNeighborStat} ::= { ospfExtNeighborTable 1 } OspfExtNeighborEntry ::= SEQUENCE { ospfExtNeighborStat RowStatus, ospfExtNeighborPollInterval Integer32, ospfExtNeighborCost Integer32, ospfExtNeighborPri Integer32, ospfExtNeighborStateStr INTEGER, ospfExtNeighborDeadTimeStr OCTET STRING, ospfExtNeighborIpAddr IpAddress, ospfExtNeighborIfName OCTET STRING } ospfExtNeighborStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize Destroy and Active." ::= { ospfExtNeighborEntry 1 } ospfExtNeighborPollInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF dead-router polling interval.The range is 1-65535. Default value is 120.The unset value is -1." ::= { ospfExtNeighborEntry 2 } ospfExtNeighborCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF neighbor cost value.The range is 1-65535. The unset value is -1." ::= { ospfExtNeighborEntry 3 } ospfExtNeighborPri OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF neighbor priority, the unset value is -1." ::= { ospfExtNeighborEntry 4 } ospfExtNeighborStateStr OBJECT-TYPE SYNTAX INTEGER { dependUpon(0), down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF NeighborState.The range is 0-8." ::= { ospfExtNeighborEntry 5 } ospfExtNeighborDeadTimeStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF dead-router time string." ::= { ospfExtNeighborEntry 6 } ospfExtNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF neighbor ip address." ::= { ospfExtNeighborEntry 7 } ospfExtNeighborIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF neighbor interface name." ::= { ospfExtNeighborEntry 8 } ospfExtRedistribute OBJECT IDENTIFIER ::= { ospfExt 9 } redistributeBgp OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol." ::= { ospfExtRedistribute 1 } redistributeBgpMetricType OBJECT-TYPE SYNTAX INTEGER { reset(0), type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric type.The unset value is 0." DEFVAL { type2 } ::= { ospfExtRedistribute 2 } redistributeBgpMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric. The range is 0-16777214.The unset value is -1." ::= { ospfExtRedistribute 3 } redistributeBgpRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol route map reference." ::= { ospfExtRedistribute 4 } redistributeBgpTag OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol tag.The range is 0-4294967295." ::= { ospfExtRedistribute 5 } redistributeConnected OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute connected." ::= { ospfExtRedistribute 6 } redistributeConnectedMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric type. The unset value is 0." DEFVAL { type2 } ::= { ospfExtRedistribute 7 } redistributeConnectedMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric.The range is 0-16777214. The unset value is -1." ::= { ospfExtRedistribute 8 } redistributeConnectedRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol route map reference." ::= { ospfExtRedistribute 9 } redistributeConnectedTag OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol tag.The range is 0-4294967295." ::= { ospfExtRedistribute 10 } redistributeRip OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RedistributeRip routing information protocol." ::= { ospfExtRedistribute 11 } redistributeRipMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric type. The unset value is 0." DEFVAL { type2 } ::= { ospfExtRedistribute 12 } redistributeRipMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric. The range is 0-16777214.The unset value is -1." ::= { ospfExtRedistribute 13 } redistributeRipRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol route map reference." ::= { ospfExtRedistribute 14 } redistributeRipTag OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol tag.The range is 0-4294967295. The unset value is -1." ::= { ospfExtRedistribute 15 } redistributeStatic OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RedistributeRip static routes." ::= { ospfExtRedistribute 16 } redistributeStaticMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric type.The unset value is 0." DEFVAL { type2 } ::= { ospfExtRedistribute 17 } redistributeStaticMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol metric.The range is 0-16777214. The unset value is -1." ::= { ospfExtRedistribute 18 } redistributeStaticRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol route map reference." ::= { ospfExtRedistribute 19 } redistributeStaticTag OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute border gateway protocol tag.The range is 0-4294967295." ::= { ospfExtRedistribute 20 } redistributeBgpTagClr OBJECT-TYPE SYNTAX INTEGER { noUse(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset redistribute Bgp." ::= { ospfExtRedistribute 21 } redistributeConnectedTagClr OBJECT-TYPE SYNTAX INTEGER { noUse(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset redistribute Connected." ::= { ospfExtRedistribute 22 } redistributeRipTagClr OBJECT-TYPE SYNTAX INTEGER { noUse(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset redistribute Rip." ::= { ospfExtRedistribute 23 } redistributeStaticTagClr OBJECT-TYPE SYNTAX INTEGER { noUse(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset redistribute Static" ::= { ospfExtRedistribute 24 } ospfExtdistribute OBJECT IDENTIFIER ::= { ospfExt 10 } ospfExtdistributeIn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filter incoming routing updates." ::= { ospfExtdistribute 1 } ospfExtdistributeOutBgp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filter outgoing routing updates for bgp." ::= { ospfExtdistribute 2 } ospfExtdistributeOutConnected OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filter outgoing routing updates for connected." ::= { ospfExtdistribute 3 } ospfExtdistributeOutRip OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filter outgoing routing updates for rip." ::= { ospfExtdistribute 4 } ospfExtdistributeOutStatic OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filter outgoing routing updates for static." ::= { ospfExtdistribute 5 } ospfExtOriginate OBJECT IDENTIFIER ::= { ospfExt 11 } ospfExtOriginateEn OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control distribution of default information." ::= { ospfExtOriginate 1 } ospfExtOriginateAlways OBJECT-TYPE SYNTAX INTEGER { no(2), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Always advertise default route." ::= { ospfExtOriginate 2 } ospfExtOriginateMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set OSPF metric type for default routes.The unset value is 0." DEFVAL { type2 } ::= { ospfExtOriginate 3 } ospfExtOriginateMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set OSPF default metric.The range is 0-16777214.The unset value is -1." ::= { ospfExtOriginate 4 } ospfExtOriginateRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Route map reference." ::= { ospfExtOriginate 5 } ospfExtNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of area stub entry." ::= { ospfExt 12 } ospfExtNetworkEntry OBJECT-TYPE SYNTAX OspfExtNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network entry" INDEX { ospfExtNetworkArea} ::= { ospfExtNetworkTable 1 } OspfExtNetworkEntry ::= SEQUENCE { ospfExtNetworkArea IpAddress, ospfExtNetworkRowStatus RowStatus } ospfExtNetworkArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF area ID in IP address format." ::= { ospfExtNetworkEntry 1 } ospfExtNetworkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtNetworkEntry 2 } ospfExtPassiveIfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtPassiveIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of passive interface entry." ::= { ospfExt 13 } ospfExtPassiveIfEntry OBJECT-TYPE SYNTAX OspfExtPassiveIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network entry " INDEX { ospfExtPassiveIfId} ::= { ospfExtPassiveIfTable 1 } OspfExtPassiveIfEntry ::= SEQUENCE { ospfExtPassiveIfId Integer32, ospfExtPassiveIfName OCTET STRING, ospfExtPassiveIfStatus RowStatus } ospfExtPassiveIfId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface's id." ::= { ospfExtPassiveIfEntry 1 } ospfExtPassiveIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface's name." ::= { ospfExtPassiveIfEntry 2 } ospfExtPassiveIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtPassiveIfEntry 3 } -- -- ospfExtMsgDigestKeyTable -- ospfExtMsgDigestKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtMsgDigestKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of digest-key entry." ::= { ospfExt 14 } ospfExtMsgDigestKeyEntry OBJECT-TYPE SYNTAX OspfExtMsgDigestKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ospfExtMsgDigestKeyIfindex,ospfExtMsgDigestKeyId } ::= { ospfExtMsgDigestKeyTable 1 } OspfExtMsgDigestKeyEntry ::= SEQUENCE { ospfExtMsgDigestKeyIfindex Integer32, ospfExtMsgDigestKeyId Integer32, ospfExtMsgDigestKeyPwd OCTET STRING, ospfExtMsgDigestKeyStatus RowStatus } ospfExtMsgDigestKeyIfindex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface's id." ::= { ospfExtMsgDigestKeyEntry 1 } ospfExtMsgDigestKeyId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "digest key's id." ::= { ospfExtMsgDigestKeyEntry 2 } ospfExtMsgDigestKeyPwd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "digest key password." ::= { ospfExtMsgDigestKeyEntry 3 } ospfExtMsgDigestKeyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtMsgDigestKeyEntry 4 } -- The OSPF Area Data Structure contains information -- regarding the various areas. The interfaces and -- virtual links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area -- -- ospfExtAreaTable -- ospfExtAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of area authentication entry." ::= { ospfExt 15 } ospfExtAreaEntry OBJECT-TYPE SYNTAX OspfExtAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area authentication entry." INDEX { ospfExtAreaId } ::= { ospfExtAreaTable 1 } OspfExtAreaEntry ::= SEQUENCE { ospfExtAreaId IpAddress, ospfExtAreaDefaultCost Integer32, --modified by liuht for bug 23742,2013-07-09 -- ospfExtAreaRowStatus -- RowStatus, ospfExtAreaAuthType INTEGER, ospfExtAreaLsaSummaryRouterCount Integer32, ospfExtAreaLsaSummaryRouterMaxAge Integer32, ospfExtAreaLsaSummaryNetworkCount Integer32, ospfExtAreaLsaSummaryNetworkMaxAge Integer32, ospfExtAreaLsaSummaryNetCount Integer32, ospfExtAreaLsaSummaryNetMaxAge Integer32, ospfExtAreaLsaSummaryASBRCount Integer32, ospfExtAreaLsaSummaryASBRMaxAge Integer32, ospfExtAreaLsaSummaryType5ExtCount Integer32, ospfExtAreaLsaSummaryType5ExtMaxAge Integer32, ospfExtAreaLsaSummaryAttributeCount Integer32, ospfExtAreaLsaSummaryAttributeMaxAge Integer32, ospfExtAreaLsaSummaryOpaqueLinkCount Integer32, ospfExtAreaLsaSummaryOpaqueLinkMaxAge Integer32, ospfExtAreaLsaSummaryOpaqueAreaCount Integer32, ospfExtAreaLsaSummaryOpaqueAreaMaxAge Integer32, ospfExtAreaLsaSummaryOpaqueASCount Integer32, ospfExtAreaLsaSummaryOpaqueASMaxAge Integer32 } ospfExtAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone." ::= { ospfExtAreaEntry 1 } ospfExtAreaDefaultCost OBJECT-TYPE SYNTAX Integer32 (1..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Ospf area default cost." ::= { ospfExtAreaEntry 2 } --modified by liuht for bug 23742,2013-07-09 --ospfExtAreaRowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo -- and Destroy and Active. -- 1 means Active -- 4 means CreateAndGo -- 6 means Destroy" -- ::= { ospfExtAreaEntry 5 } ospfExtAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(0), simplePassword(1), md5(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use message-digest authentication." ::= { ospfExtAreaEntry 6 } ospfExtAreaLsaSummaryRouterCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf router LSA count for specified area." ::= { ospfExtAreaEntry 7 } ospfExtAreaLsaSummaryRouterMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf router LSA count in max age status for specified area." ::= { ospfExtAreaEntry 8 } ospfExtAreaLsaSummaryNetworkCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf network LSA count for specified area." ::= { ospfExtAreaEntry 9 } ospfExtAreaLsaSummaryNetworkMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf network LSA count in max age status for specified area." ::= { ospfExtAreaEntry 10 } ospfExtAreaLsaSummaryNetCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary net LSA count for specified area." ::= { ospfExtAreaEntry 11 } ospfExtAreaLsaSummaryNetMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary net LSA count in max age status for specified area." ::= { ospfExtAreaEntry 12 } ospfExtAreaLsaSummaryASBRCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary ASBR LSA count for specified area." ::= { ospfExtAreaEntry 13 } ospfExtAreaLsaSummaryASBRMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf summary ASBR LSA count in max age status for specified area." ::= { ospfExtAreaEntry 14 } ospfExtAreaLsaSummaryType5ExtCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf type-5 Ext LSA count for specified area." ::= { ospfExtAreaEntry 15 } ospfExtAreaLsaSummaryType5ExtMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf type-5 Ext LSA count in max age status for specified area." ::= { ospfExtAreaEntry 16 } ospfExtAreaLsaSummaryAttributeCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf attribute LSA count for specified area." ::= { ospfExtAreaEntry 17 } ospfExtAreaLsaSummaryAttributeMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf attribute LSA count in max age status for specified area." ::= { ospfExtAreaEntry 18 } ospfExtAreaLsaSummaryOpaqueLinkCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque link LSA count for specified area." ::= { ospfExtAreaEntry 19 } ospfExtAreaLsaSummaryOpaqueLinkMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque link LSA count in max age status for specified area." ::= { ospfExtAreaEntry 20 } ospfExtAreaLsaSummaryOpaqueAreaCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque area LSA count for specified area." ::= { ospfExtAreaEntry 21 } ospfExtAreaLsaSummaryOpaqueAreaMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque area LSA count in max age status for specified area." ::= { ospfExtAreaEntry 22 } ospfExtAreaLsaSummaryOpaqueASCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque AS LSA count for specified area." ::= { ospfExtAreaEntry 23 } ospfExtAreaLsaSummaryOpaqueASMaxAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ospf opaque AS LSA count in max age status for specified area." ::= { ospfExtAreaEntry 24 } -- -- ospfExtAreaRangeTable -- ospfExtAreaRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAreaRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of area range entry." ::= { ospfExt 16 } ospfExtAreaRangeEntry OBJECT-TYPE SYNTAX OspfExtAreaRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area range entry." INDEX { ospfExtAreaRangeRowStatus} ::= { ospfExtAreaRangeTable 1 } OspfExtAreaRangeEntry ::= SEQUENCE { ospfExtAreaRangeRowStatus RowStatus, ospfExtAreaRangeAdvertise INTEGER } ospfExtAreaRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtAreaRangeEntry 5 } ospfExtAreaRangeAdvertise OBJECT-TYPE SYNTAX INTEGER { advertise(1), noAdvertise(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Use message-digest authentication." ::= { ospfExtAreaRangeEntry 6 } -- -- ospfExtAreaVirtualLinkTable -- ospfExtAreaVirtualLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAreaVirtualLinkEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Table of area virtual link entry." ::= { ospfExt 17 } ospfExtAreaVirtualLinkEntry OBJECT-TYPE SYNTAX OspfExtAreaVirtualLinkEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Area virtual link entry." INDEX { ospfExtAreaVirtualLinkAreaId, ospfExtAreaVirtualLinkIpAddr} ::= { ospfExtAreaVirtualLinkTable 1 } OspfExtAreaVirtualLinkEntry ::= SEQUENCE { ospfExtAreaVirtualLinkAreaId IpAddress, ospfExtAreaVirtualLinkIpAddr IpAddress, ospfExtAreaVirtualLinkDeadInterval Integer32, ospfExtAreaVirtualLinkHelloInterval Integer32, ospfExtAreaVirtualLinkRetransInterval Integer32, ospfExtAreaVirtualLinkTransDelay Integer32, ospfExtAreaVirtualLinkAuthKey OCTET STRING, ospfExtAreaVirtualLinkRowStatus RowStatus, ospfExtAreaVirtualLinkAuthClr INTEGER, ospfExtAreaVirtualLinkStat INTEGER, ospfExtAreaVirtualLinkIfName OCTET STRING, ospfExtAreaVirtualLinkLocalAddr IpAddress, ospfExtAreaVirtualLinkRemoteAddr IpAddress, ospfExtAreaVirtualLinkHelloDue OCTET STRING, ospfExtAreaVirtualLinkAdjacencyState INTEGER } ospfExtAreaVirtualLinkAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The OSPF area ID." ::= { ospfExtAreaVirtualLinkEntry 1 } ospfExtAreaVirtualLinkIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The ID(ip address) associated with virtual link neighbor." ::= { ospfExtAreaVirtualLinkEntry 2 } ospfExtAreaVirtualLinkDeadInterval OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The OSPF virtual link dead interval, the default value is 40." ::= { ospfExtAreaVirtualLinkEntry 3 } ospfExtAreaVirtualLinkHelloInterval OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The OSPF virtual link hello interval, the default value is 10." ::= { ospfExtAreaVirtualLinkEntry 4 } ospfExtAreaVirtualLinkRetransInterval OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The OSPF virtual link retransmit interval, the default value is 5." ::= { ospfExtAreaVirtualLinkEntry 5 } ospfExtAreaVirtualLinkTransDelay OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The OSPF virtual link transmit delay, the default value is 1." ::= { ospfExtAreaVirtualLinkEntry 6 } ospfExtAreaVirtualLinkAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The OSPF virtual link authentication key." ::= { ospfExtAreaVirtualLinkEntry 7 } ospfExtAreaVirtualLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfExtAreaVirtualLinkEntry 10 } ospfExtAreaVirtualLinkAuthClr OBJECT-TYPE SYNTAX INTEGER { none(0), simplePassword(1), md5(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Enable authentication, the default value is 0." ::= { ospfExtAreaVirtualLinkEntry 11 } ospfExtAreaVirtualLinkStat OBJECT-TYPE SYNTAX INTEGER { dependUpon(0), down(1), loopback(2), waiting(3), pointTopoint(4), drOther(5), backup(6), dr(7) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link status.Range is 0-7." ::= { ospfExtAreaVirtualLinkEntry 12 } ospfExtAreaVirtualLinkIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link interface name." ::= { ospfExtAreaVirtualLinkEntry 13 } ospfExtAreaVirtualLinkLocalAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link local address." ::= { ospfExtAreaVirtualLinkEntry 14 } ospfExtAreaVirtualLinkRemoteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link remote address." ::= { ospfExtAreaVirtualLinkEntry 15 } ospfExtAreaVirtualLinkHelloDue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link hello due." ::= { ospfExtAreaVirtualLinkEntry 16 } ospfExtAreaVirtualLinkAdjacencyState OBJECT-TYPE SYNTAX INTEGER { dependUpon(0), down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The OSPF virtual link adjacency state, range is 0-8." ::= { ospfExtAreaVirtualLinkEntry 17 } -- -- ospfExtAreaVirtualLinkMsgDigestKeyTable -- ospfExtAreaVirtualLinkMsgDigestKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAreaVirtualLinkMsgDigestKeyEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Table of area authentication entry." ::= { ospfExt 18 } ospfExtAreaVirtualLinkMsgDigestKeyEntry OBJECT-TYPE SYNTAX OspfExtAreaVirtualLinkMsgDigestKeyEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Area authentication entry." INDEX { ospfExtAreaVirtualLinkMsgDigestKeyRowStatus} ::= { ospfExtAreaVirtualLinkMsgDigestKeyTable 1 } OspfExtAreaVirtualLinkMsgDigestKeyEntry ::= SEQUENCE { ospfExtAreaVirtualLinkMsgDigestKeyRowStatus RowStatus, ospfExtAreaVirtualLinkMsgDigestKeyPwd OCTET STRING } ospfExtAreaVirtualLinkMsgDigestKeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ospfExtAreaVirtualLinkMsgDigestKeyEntry 1 } ospfExtAreaVirtualLinkMsgDigestKeyPwd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Area virtual link digest key password." ::= { ospfExtAreaVirtualLinkMsgDigestKeyEntry 2 } -- -- ospfExtRouterLsdbTable -- ospfExtRouterLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtRouterLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of OSPF router LSDB." ::= { ospfExt 19 } ospfExtRouterLsdbEntry OBJECT-TYPE SYNTAX OspfExtRouterLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single instance of LSDB entry." INDEX { ospfExtRouterLsaId} ::= { ospfExtRouterLsdbTable 1 } OspfExtRouterLsdbEntry ::= SEQUENCE { ospfExtRouterLsaId Integer32, ospfExtRouterLsaAge Integer32, ospfExtRouterLsaOption OCTET STRING, ospfExtRouterLsaAdvRouter IpAddress, ospfExtRouterLsaSeq Gauge32, ospfExtRouterLsaChkSum Integer32, ospfExtRouterLsaLinkCount Integer32, ospfExtRouterLsaOpaqueID Integer32, ospfExtRouterLsaOpaqueType INTEGER, ospfExtRouterLsaLength Integer32 } ospfExtRouterLsaId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA id." ::= { ospfExtRouterLsdbEntry 1 } ospfExtRouterLsaAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA aging time." ::= { ospfExtRouterLsdbEntry 2 } ospfExtRouterLsaOption OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA option string." ::= { ospfExtRouterLsdbEntry 3 } ospfExtRouterLsaAdvRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA ADV Router." ::= { ospfExtRouterLsdbEntry 4 } ospfExtRouterLsaSeq OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA sequence number." ::= { ospfExtRouterLsdbEntry 5 } ospfExtRouterLsaChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtRouterLsdbEntry 6 } ospfExtRouterLsaLinkCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA link count." ::= { ospfExtRouterLsdbEntry 7 } ospfExtRouterLsaOpaqueID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA tag, used by summary LSA and AS external LSA." ::= { ospfExtRouterLsdbEntry 8 } ospfExtRouterLsaOpaqueType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA opaque type." ::= { ospfExtRouterLsdbEntry 9 } ospfExtRouterLsaLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtRouterLsdbEntry 10 } -- -- ospfExtNetworkLsdbTable -- ospfExtNetworkLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtNetworkLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of OSPF network LSDB." ::= { ospfExt 20 } ospfExtNetworkLsdbEntry OBJECT-TYPE SYNTAX OspfExtNetworkLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single instance of LSDB entry." INDEX { ospfExtNetworkLsaId} ::= { ospfExtNetworkLsdbTable 1 } OspfExtNetworkLsdbEntry ::= SEQUENCE { ospfExtNetworkLsaId Integer32, ospfExtNetworkLsaAge Integer32, ospfExtNetworkLsaOption OCTET STRING, ospfExtNetworkLsaAdvRouter IpAddress, ospfExtNetworkLsaSeq Gauge32, ospfExtNetworkLsaChkSum Integer32, ospfExtNetworkLsaOpaqueID Integer32, ospfExtNetworkLsaOpaqueType INTEGER, ospfExtNetworkLsaLength Integer32, ospfExtNetworkLsaNetworkMask IpAddress } ospfExtNetworkLsaId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA id." ::= { ospfExtNetworkLsdbEntry 1 } ospfExtNetworkLsaAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA aging time." ::= { ospfExtNetworkLsdbEntry 2 } ospfExtNetworkLsaOption OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA option string." ::= { ospfExtNetworkLsdbEntry 3 } ospfExtNetworkLsaAdvRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA ADV Router." ::= { ospfExtNetworkLsdbEntry 4 } ospfExtNetworkLsaSeq OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA sequence number." ::= { ospfExtNetworkLsdbEntry 5 } ospfExtNetworkLsaChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtNetworkLsdbEntry 6 } ospfExtNetworkLsaOpaqueID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA tag, used by summary LSA and AS external LSA." ::= { ospfExtNetworkLsdbEntry 8 } ospfExtNetworkLsaOpaqueType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA opaque type." ::= { ospfExtNetworkLsdbEntry 9 } ospfExtNetworkLsaLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtNetworkLsdbEntry 10 } ospfExtNetworkLsaNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA network mask, used by network, summary,summary_asbr LSA." ::= { ospfExtNetworkLsdbEntry 11 } -- -- ospfExtSummaryLsdbTable -- ospfExtSummaryLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtSummaryLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of OSPF summary LSDB." ::= { ospfExt 21 } ospfExtSummaryLsdbEntry OBJECT-TYPE SYNTAX OspfExtSummaryLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single instance of LSDB entry." INDEX { ospfExtSummaryLsaId} ::= { ospfExtSummaryLsdbTable 1 } OspfExtSummaryLsdbEntry ::= SEQUENCE { ospfExtSummaryLsaId Integer32, ospfExtSummaryLsaAge Integer32, ospfExtSummaryLsaOption OCTET STRING, ospfExtSummaryLsaAdvRouter IpAddress, ospfExtSummaryLsaSeq Gauge32, ospfExtSummaryLsaChkSum Integer32, ospfExtSummaryLsaOpaqueID Integer32, ospfExtSummaryLsaOpaqueType INTEGER, ospfExtSummaryLsaLength Integer32, ospfExtSummaryLsaNetworkMask IpAddress, ospfExtSummaryLsaTos0Metric Integer32 } ospfExtSummaryLsaId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA id." ::= { ospfExtSummaryLsdbEntry 1 } ospfExtSummaryLsaAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA aging time." ::= { ospfExtSummaryLsdbEntry 2 } ospfExtSummaryLsaOption OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA option string." ::= { ospfExtSummaryLsdbEntry 3 } ospfExtSummaryLsaAdvRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA ADV Router." ::= { ospfExtSummaryLsdbEntry 4 } ospfExtSummaryLsaSeq OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA sequence number." ::= { ospfExtSummaryLsdbEntry 5 } ospfExtSummaryLsaChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtSummaryLsdbEntry 6 } ospfExtSummaryLsaOpaqueID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA tag, used by summary LSA and AS external LSA." ::= { ospfExtSummaryLsdbEntry 8 } ospfExtSummaryLsaOpaqueType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA opaque type." ::= { ospfExtSummaryLsdbEntry 9 } ospfExtSummaryLsaLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtSummaryLsdbEntry 10 } ospfExtSummaryLsaNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA network mask, used by network, summary,summary_asbr LSA." ::= { ospfExtSummaryLsdbEntry 11 } ospfExtSummaryLsaTos0Metric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA." ::= { ospfExtSummaryLsdbEntry 12 } -- -- ospfExtSummaryAsbrLsdbTable -- ospfExtSummaryAsbrLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtSummaryAsbrLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of OSPF Summary ASBR LSDB." ::= { ospfExt 22 } ospfExtSummaryAsbrLsdbEntry OBJECT-TYPE SYNTAX OspfExtSummaryAsbrLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single instance of LSDB entry." INDEX { ospfExtSummaryAsbrLsaId} ::= { ospfExtSummaryAsbrLsdbTable 1 } OspfExtSummaryAsbrLsdbEntry ::= SEQUENCE { ospfExtSummaryAsbrLsaId Integer32, ospfExtSummaryAsbrLsaAge Integer32, ospfExtSummaryAsbrLsaOption OCTET STRING, ospfExtSummaryAsbrLsaAdvRouter IpAddress, ospfExtSummaryAsbrLsaSeq Gauge32, ospfExtSummaryAsbrLsaChkSum Integer32, ospfExtSummaryAsbrLsaOpaqueID Integer32, ospfExtSummaryAsbrLsaOpaqueType INTEGER, ospfExtSummaryAsbrLsaLength Integer32, ospfExtSummaryAsbrLsaNetworkMask IpAddress, ospfExtSummaryAsbrLsaTos0Metric Integer32 } ospfExtSummaryAsbrLsaId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA id." ::= { ospfExtSummaryAsbrLsdbEntry 1 } ospfExtSummaryAsbrLsaAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA aging time." ::= { ospfExtSummaryAsbrLsdbEntry 2 } ospfExtSummaryAsbrLsaOption OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA option string." ::= { ospfExtSummaryAsbrLsdbEntry 3 } ospfExtSummaryAsbrLsaAdvRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA ADV Router." ::= { ospfExtSummaryAsbrLsdbEntry 4 } ospfExtSummaryAsbrLsaSeq OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA sequence number." ::= { ospfExtSummaryAsbrLsdbEntry 5 } ospfExtSummaryAsbrLsaChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtSummaryAsbrLsdbEntry 6 } ospfExtSummaryAsbrLsaOpaqueID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA tag, used by summary LSA and AS external LSA." ::= { ospfExtSummaryAsbrLsdbEntry 8 } ospfExtSummaryAsbrLsaOpaqueType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA opaque type." ::= { ospfExtSummaryAsbrLsdbEntry 9 } ospfExtSummaryAsbrLsaLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtSummaryAsbrLsdbEntry 10 } ospfExtSummaryAsbrLsaNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA network mask, used by network, summary,summary_asbr LSA." ::= { ospfExtSummaryAsbrLsdbEntry 11 } ospfExtSummaryAsbrLsaTos0Metric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA." ::= { ospfExtSummaryAsbrLsdbEntry 12 } -- -- ospfExtAsExtLsdbTable -- ospfExtAsExtLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtAsExtLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of OSPF AS external LSDB." ::= { ospfExt 23 } ospfExtAsExtLsdbEntry OBJECT-TYPE SYNTAX OspfExtAsExtLsdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single instance of LSDB entry." INDEX { ospfExtAsExtLsaId} ::= { ospfExtAsExtLsdbTable 1 } OspfExtAsExtLsdbEntry ::= SEQUENCE { ospfExtAsExtLsaId Integer32, ospfExtAsExtLsaAge Integer32, ospfExtAsExtLsaOption OCTET STRING, ospfExtAsExtLsaAdvRouter IpAddress, ospfExtAsExtLsaSeq Gauge32, ospfExtAsExtLsaChkSum Integer32, ospfExtAsExtLsaOpaqueID Integer32, ospfExtAsExtLsaOpaqueType INTEGER, ospfExtAsExtLsaLength Integer32, ospfExtAsExtLsaNetworkMask IpAddress, ospfExtAsExtLsaTos0Metric Integer32, ospfExtAsExtLsaMetricType INTEGER, ospfExtAsExtLsaForwardAddress IpAddress, ospfExtAsExtLsaExternalRouteTag Integer32 } ospfExtAsExtLsaId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA id." ::= { ospfExtAsExtLsdbEntry 1 } ospfExtAsExtLsaAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA aging time." ::= { ospfExtAsExtLsdbEntry 2 } ospfExtAsExtLsaOption OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA option string." ::= { ospfExtAsExtLsdbEntry 3 } ospfExtAsExtLsaAdvRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA ADV Router." ::= { ospfExtAsExtLsdbEntry 4 } ospfExtAsExtLsaSeq OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA sequence number." ::= { ospfExtAsExtLsdbEntry 5 } ospfExtAsExtLsaChkSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtAsExtLsdbEntry 6 } ospfExtAsExtLsaOpaqueID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA tag, used by summary LSA and AS external LSA." ::= { ospfExtAsExtLsdbEntry 8 } ospfExtAsExtLsaOpaqueType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA opaque type." ::= { ospfExtAsExtLsdbEntry 9 } ospfExtAsExtLsaLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA check sum." ::= { ospfExtAsExtLsdbEntry 10 } ospfExtAsExtLsaNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA network mask, used by network, summary,summary_asbr LSA." ::= { ospfExtAsExtLsdbEntry 11 } ospfExtAsExtLsaTos0Metric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA." ::= { ospfExtAsExtLsdbEntry 12 } ospfExtAsExtLsaMetricType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA metric type, used by as_external LSA." ::= { ospfExtAsExtLsdbEntry 13 } ospfExtAsExtLsaForwardAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA forward address, used by as_external LSA." ::= { ospfExtAsExtLsdbEntry 14 } ospfExtAsExtLsaExternalRouteTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF LSA external route tag, used by as_external LSA." ::= { ospfExtAsExtLsdbEntry 15 } ospfExtGeneralGroup OBJECT IDENTIFIER ::= { ospfExt 30 } ospfRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses." ::= { ospfExtGeneralGroup 1 } ospfExtSysUpTime OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF process up time." ::= { ospfExtGeneralGroup 2 } ospfExtVrfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "VRF name which the OSPF process bind to." ::= { ospfExtGeneralGroup 3 } ospfCompatibleRfc OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The RFC2328, and RFC1583 Compatibility state." ::= { ospfExtGeneralGroup 4 } ospfOpaqueCapable OBJECT-TYPE SYNTAX INTEGER { unsupport(0), support(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The opaque support capability." ::= { ospfExtGeneralGroup 5 } ospfAbrType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF ABR type." ::= { ospfExtGeneralGroup 6 } ospfAbsr OBJECT-TYPE SYNTAX INTEGER { notABSR(0), isABSR(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "To show if this router is an ASBR." ::= { ospfExtGeneralGroup 7 } ospfDdCountIn OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incomming current DD exchange neighbors." ::= { ospfExtGeneralGroup 8 } ospfDdCountOut OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing current DD exchange neighbors." ::= { ospfExtGeneralGroup 9 } ospfMaxDd OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DD." ::= { ospfExtGeneralGroup 10 } ospfExternalLsaCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of external LSA." ::= { ospfExtGeneralGroup 11 } ospfExternalLsaChecksum OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "External LSA checksum." ::= { ospfExtGeneralGroup 12 } ospfNoDefaultExternalLsaCount OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of non-default external LSA." ::= { ospfExtGeneralGroup 13 } ospfExternalLsaDbLimit OBJECT-TYPE SYNTAX INTEGER { unlimit(0), limit(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "External LSA database limit state" ::= { ospfExtGeneralGroup 14 } ospfLsDbLimit OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "LSDB database overflow limit." ::= { ospfExtGeneralGroup 15 } ospfLsaOrgCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LSA originated." ::= { ospfExtGeneralGroup 16 } ospfLsaRcvCount OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LSA received." ::= { ospfExtGeneralGroup 17 } ospfExtLsdbLimitInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "before set this node,please set the node ospfExtLsdbLimitNumber first. The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted." DEFVAL { 0 } ::= { ospfExtGeneralGroup 18 } ospfExtLsdbLimitNumber OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)." DEFVAL { -1 } ::= { ospfExtGeneralGroup 19 } -- Sub Module: USER -- -- Textual conventions -- LoginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify severity level of message." SYNTAX INTEGER { nologin(1), login(2), loginlocal(3) } -- -- Node definitions -- lineTable OBJECT-TYPE SYNTAX SEQUENCE OF LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "describe the login line property." ::= { user 1 } lineEntry OBJECT-TYPE SYNTAX LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "describe the login property." INDEX { lineType, lineIndex } ::= { lineTable 1 } LineEntry ::= SEQUENCE { lineType INTEGER, lineIndex INTEGER, lineLoginMode LoginType, linePassword OCTET STRING , linePriviledge INTEGER, lineExecTimeoutmin INTEGER, lineExecTimeoutsec INTEGER, lineAccessInName OCTET STRING, lineTransportType INTEGER, linePasswordType INTEGER } lineType OBJECT-TYPE SYNTAX INTEGER { console(0), vty(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The line type. 0 console. 1 vty." ::= { lineEntry 1 } lineIndex OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The line number.index range 0~7." ::= { lineEntry 2 } lineLoginMode OBJECT-TYPE SYNTAX LoginType MAX-ACCESS read-write STATUS current DESCRIPTION "The line login mode. 1 no login. 2 login. 3 login local." ::= { lineEntry 3 } linePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The line password." ::= { lineEntry 4 } linePriviledge OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The line priviledge. The valid range is [1, 4]." ::= { lineEntry 5 } lineExecTimeoutmin OBJECT-TYPE SYNTAX INTEGER(0..35791) MAX-ACCESS read-write STATUS current DESCRIPTION "The exec mode timeout minute value." ::= { lineEntry 6 } lineExecTimeoutsec OBJECT-TYPE SYNTAX INTEGER(0..2147483) MAX-ACCESS read-write STATUS current DESCRIPTION "The exec mode timeout second value." ::= { lineEntry 7 } lineAccessInName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The access name applied for vty. The first character of the name must be in [a-zA-Z0-9]." ::= { lineEntry 8 } lineTransportType OBJECT-TYPE SYNTAX INTEGER { all(0), ssh(1), telnet(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The vty line Transport type. 0 all. 1 ssh. 2 telnet. 3 none." ::= { lineEntry 9 } linePasswordType OBJECT-TYPE SYNTAX INTEGER(0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The Password type. 0 not set password. 1 not encrypted password. 2 encrypted password." ::= { lineEntry 10 } usernameTable OBJECT-TYPE SYNTAX SEQUENCE OF UsernameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of loghost." ::= { user 2 } usernameEntry OBJECT-TYPE SYNTAX UsernameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of user." INDEX { usernameIndex } ::= { usernameTable 1 } UsernameEntry ::= SEQUENCE { usernameIndex Integer32, username OCTET STRING, password OCTET STRING, userPrivilege Integer32, userPwdType INTEGER, usernameRowStatus RowStatus } usernameIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The username table index." ::= { usernameEntry 1 } username OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "The username. Can only include [0-9a-zA-Z.-_], and must starting with alphanumeric. Its length range is [1, 32)" ::= { usernameEntry 2 } password OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password. If type is secretForUser or normalPwd, the valid range of length is [1,64). If type is hiddenPwd, the valid range of length is [1,128]." ::= { usernameEntry 3 } userPrivilege OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The user privilege <1-4>." ::= { usernameEntry 4 } userPwdType OBJECT-TYPE SYNTAX INTEGER { secretForUser(1), hiddenPwd(2), normalPwd(3), notsetPwd(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The user password type. 1 secretForUser. 2 hiddenPwd. 3 normalPwd. 4 notsetPwd." ::= { usernameEntry 5 } usernameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { usernameEntry 6 } enablePasswordTable OBJECT-TYPE ---{{{1 SYNTAX SEQUENCE OF EnablePasswordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of enable password." ::= { user 3 } enablePasswordEntry OBJECT-TYPE SYNTAX EnablePasswordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of enable password." INDEX { privilegeIndex } ::= { enablePasswordTable 1 } EnablePasswordEntry ::= SEQUENCE { privilegeIndex Integer32, passwordType INTEGER, enablePassword OCTET STRING, enableRowStatus RowStatus } privilegeIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The enable password table index." ::= { enablePasswordEntry 1 } passwordType OBJECT-TYPE SYNTAX INTEGER { secretForUser(1), hiddenPwd(2), normalPwd(3), notsetPwd(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The password type. 1 secretForUser. 2 hiddenPwd. 3 normalPwd. The value notsetPwd(4) is only for the return value and not support configured." ::= { enablePasswordEntry 2 } enablePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The enable password. If type is secretForUser or normalPwd, the valid range of length is [1,64). If type is hiddenPwd, the valid range of length is [1,128]." ::= { enablePasswordEntry 3 } enableRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { enablePasswordEntry 4 } serviceTerminalLength OBJECT-TYPE SYNTAX INTEGER(-1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Describe the terminal length. 0 means system doesn't limit the line numbers displayed. -1 means system doesn't control terminal length." ::= { user 4 } serviceCipherDetect OBJECT-TYPE SYNTAX INTEGER { none(1), normal(2), strong(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describe the cipher detect. 1 Disable security check 2 Cipher must contain digital and normal char 3 Cipher must contain digital, normal char and special char" ::= { user 5 } -- -- Users table -- usersTable OBJECT-TYPE SYNTAX SEQUENCE OF UsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of users." ::= { user 6 } usersEntry OBJECT-TYPE SYNTAX UsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of users." INDEX { usersLineType, usersLineIndex } ::= { usersTable 1 } UsersEntry ::= SEQUENCE { usersLineType Integer32, usersLineIndex Integer32, usersname OCTET STRING, usersIdleTime OCTET STRING, usersLocation OCTET STRING } usersLineType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Users line Type. 0 means console,and 1 means vty." ::= { usersEntry 1 } usersLineIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Users line index." ::= { usersEntry 2 } usersname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Users name." ::= { usersEntry 3 } usersIdleTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The idle time." ::= { usersEntry 4 } usersLocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user location." ::= { usersEntry 5 } lineMaxVTY OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Set max vty number and the default value is 8." ::= { user 7 } -- Sub Module: SNMPEXT snmpExtMibObject OBJECT IDENTIFIER ::= { snmpExt 1 } snmpVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2c(2), v3(3), all(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp agent's snmp version.v1(1),v2c(2),v3(3),all(4). Default value is all(4)." -- DEFVAL INDEX { all } ::= { snmpExtMibObject 1 } snmpEngineID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (10..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Engine ID in hexadecimal format.If the value is not set use the default value.Range 10~64. Default value 30383038303830383038." -- DEFVAL INDEX { all } ::= { snmpExtMibObject 2 } snmpCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp community configure." ::= { snmpExtMibObject 3 } snmpCommunityEntry OBJECT-TYPE SYNTAX SnmpCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpcommunityTable." INDEX { snmpcommIndex } ::= { snmpCommunityTable 1 } SnmpCommunityEntry ::= SEQUENCE { snmpcommIndex Integer32, snmpcommName OCTET STRING, snmpcommType Integer32, snmpcommView OCTET STRING, snmpcommRowStatus RowStatus } snmpcommIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp community's index.Range 0~31." ::= { snmpCommunityEntry 1 } snmpcommName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp community's name. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 256)." ::= { snmpCommunityEntry 2 } snmpcommType OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp community type's index.read-only(1) read-write(2)." ::= { snmpCommunityEntry 3 } snmpcommView OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp community's View. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)." ::= { snmpCommunityEntry 4 } snmpcommRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpCommunityEntry 5 } -- Snmp View Table snmpViewTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp view configure." ::= { snmpExtMibObject 4 } snmpViewEntry OBJECT-TYPE SYNTAX SnmpViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpViewTable." INDEX { snmpviewIndex} ::= { snmpViewTable 1 } SnmpViewEntry ::= SEQUENCE { snmpviewIndex Integer32, snmpviewName OCTET STRING, snmpviewType Integer32, snmpviewcldOID OCTET STRING, snmpviewMask OCTET STRING, snmpviewRowStatus RowStatus } snmpviewIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp View's index. Range is 0~31." ::= { snmpViewEntry 1 } snmpviewName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp View's name. Range is 1~31." ::= { snmpViewEntry 2 } snmpviewType OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "View type 1: include a subtree.View type 2: exclude a subtree." ::= { snmpViewEntry 3 } snmpviewcldOID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "Subtree name. Format is '.A.B.C..' ." ::= { snmpViewEntry 4 } snmpviewMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Define the subtree mask." ::= { snmpViewEntry 5 } snmpviewRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpViewEntry 6 } -- -- Snmp Usm-user Table -- snmpUsmuserTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpUsmuserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp Usm-user configure." ::= { snmpExtMibObject 5 } snmpUsmuserEntry OBJECT-TYPE SYNTAX SnmpUsmuserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpUsmuserTable." INDEX { snmpUsmuserIndex } ::= { snmpUsmuserTable 1 } SnmpUsmuserEntry ::= SEQUENCE { snmpUsmuserIndex Integer32, snmpUsmuserName OCTET STRING, snmpUsmuserRemote OCTET STRING, snmpUsmuserAuth INTEGER, snmpUsmuserAuthHid INTEGER, snmpUsmuserAuthPWD OCTET STRING, snmpUsmuserPrivacy INTEGER, snmpUsmuserPrivacyHid INTEGER, snmpUsmuserPrivacyPWD OCTET STRING, snmpUsmuserRowStatus RowStatus } snmpUsmuserIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp usm-user's index.Range 0~31." ::= { snmpUsmuserEntry 1 } snmpUsmuserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp usm-user's name.Range 1~31." ::= { snmpUsmuserEntry 2 } snmpUsmuserRemote OBJECT-TYPE SYNTAX OCTET STRING (SIZE (10..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp usm-user's Remote.Range 10~64." ::= { snmpUsmuserEntry 3 } snmpUsmuserAuth OBJECT-TYPE SYNTAX INTEGER { none(1), md5(2), sha(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication parameters for the user. none(1),md5(2),sha(3)." -- DEFVAL { md5 } ::= { snmpUsmuserEntry 4 } snmpUsmuserAuthHid OBJECT-TYPE SYNTAX INTEGER { unhidden(1), hidden(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "pecifies a HIDDEN password will follow. unhidden(1),hidden(2)." -- DEFVAL { md5 } ::= { snmpUsmuserEntry 5 } snmpUsmuserAuthPWD OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify an authentication password.Password length depends on: snmpUsmuserAuthHid(5) is unhidden(1), password Range is 8~64, otherwise 1~128." ::= { snmpUsmuserEntry 6 } snmpUsmuserPrivacy OBJECT-TYPE SYNTAX INTEGER { none(1), des(2), aes(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Privacy parameters for the user. none(1),des(2),aes(3)." -- DEFVAL { des } ::= { snmpUsmuserEntry 7 } snmpUsmuserPrivacyHid OBJECT-TYPE SYNTAX INTEGER { unhidden(1), hidden(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies a HIDDEN password will follow. unhidden(1), hidden(2)." -- DEFVAL { md5 } ::= { snmpUsmuserEntry 8 } snmpUsmuserPrivacyPWD OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify a privacy password.Password length depends on: snmpUsmuserPrivacyHid(8)is unhidden(1), password Range is 8~64, otherwise 1~128." ::= { snmpUsmuserEntry 9 } snmpUsmuserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpUsmuserEntry 10 } -- -- Snmp server group Table -- snmpGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp server group configure." ::= { snmpExtMibObject 6 } snmpGrpEntry OBJECT-TYPE SYNTAX SnmpGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpGrpTable." INDEX { snmpGrpIndex } ::= { snmpGrpTable 1 } SnmpGrpEntry ::= SEQUENCE { snmpGrpIndex Integer32, snmpGrpName OCTET STRING, snmpGrpUser OCTET STRING, snmpGrpSecMode INTEGER, snmpGrpRowStatus RowStatus } snmpGrpIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp group's index. Range is 0~31." ::= { snmpGrpEntry 1 } snmpGrpName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the group. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 31)." ::= { snmpGrpEntry 2 } snmpGrpUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Define a user security name belongs to the group. Range is 1~31." ::= { snmpGrpEntry 3 } snmpGrpSecMode OBJECT-TYPE SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Define the group security model. 0 any 1 v1 2 v2c 3 usm(default) Only support set 3(usm) now." ::= { snmpGrpEntry 4 } snmpGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpGrpEntry 10 } -- -- Snmp server access Table -- snmpAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the access for a exact group." ::= { snmpExtMibObject 7 } snmpAccessEntry OBJECT-TYPE SYNTAX SnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpAccessTable." INDEX { snmpAccessIndex } ::= { snmpAccessTable 1 } SnmpAccessEntry ::= SEQUENCE { snmpAccessIndex Integer32, snmpAccessName OCTET STRING, snmpAccessUsm INTEGER, snmpAccessRead OCTET STRING, snmpAccessWrite OCTET STRING, snmpAccessNotify OCTET STRING, snmpAccessContext OCTET STRING, snmpAccessContextType INTEGER, snmpAccessSecuMode INTEGER, snmpAccessRowStatus RowStatus } snmpAccessIndex OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp access's index.Range 1~31." ::= { snmpAccessEntry 1 } snmpAccessName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp Access's name.Range 1~31." ::= { snmpAccessEntry 2 } snmpAccessUsm OBJECT-TYPE SYNTAX INTEGER { noauth(1), auth(2), priv(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp usm security model noauth(1): Set security level to no authentication auth(2): Set security level to authentication but with no privacy priv(3): Set security level to authentication with privacy" ::= { snmpAccessEntry 3 } snmpAccessRead OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Restrict this access read area to a named MIB view." ::= { snmpAccessEntry 4 } snmpAccessWrite OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Restrict this access write area to a named MIB view." ::= { snmpAccessEntry 5 } snmpAccessNotify OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Restrict this access notify area to a named MIB view." ::= { snmpAccessEntry 6 } snmpAccessContext OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Set the access's context name. Range is 0~31. " ::= { snmpAccessEntry 7 } snmpAccessContextType OBJECT-TYPE SYNTAX INTEGER { none(1), exact(2), prefix(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp usm security model none(1): none exact(2): Context match(default is exact) type specification: exact prefix(3): Context match(default is exact) type specification: prefix." ::= { snmpAccessEntry 8 } snmpAccessSecuMode OBJECT-TYPE SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Define the access security model. 0 any 1 v1 2 v2c 3 usm(default) Only support set 3(usm) now." ::= { snmpAccessEntry 9 } snmpAccessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpAccessEntry 10 } -- -- Snmp server notify Table -- snmpNotifyTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Define a notify name which related to send SNMP notification." ::= { snmpExtMibObject 8 } snmpNotifyEntry OBJECT-TYPE SYNTAX SnmpNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpNotifyTable." INDEX { snmpNotifyIndex } ::= { snmpNotifyTable 1 } SnmpNotifyEntry ::= SEQUENCE { snmpNotifyIndex Integer32, snmpNotifyName OCTET STRING, snmpNotifyTag OCTET STRING, snmpNotifyOption INTEGER, snmpNotifyRowStatus RowStatus } snmpNotifyIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp notify's index. Range is 0~31." ::= { snmpNotifyEntry 1 } snmpNotifyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the notify. Range is 1~31. " ::= { snmpNotifyEntry 2 } snmpNotifyTag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " The name of the tag." ::= { snmpNotifyEntry 3 } snmpNotifyOption OBJECT-TYPE SYNTAX INTEGER { trap(1), inform(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "snmpNotifyOption trap(1): Set notify type(default is trap) to TRAP inform(2): Set notify type(default is trap) to INFORM." ::= { snmpNotifyEntry 4 } snmpNotifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpNotifyEntry 5 } -- -- Snmp server target address Table -- snmpTargetAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTargetAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define a target address name which related to send SNMP notifications." ::= { snmpExtMibObject 9 } snmpTargetAddrEntry OBJECT-TYPE SYNTAX SnmpTargetAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpTargetAddrTable." INDEX { snmpTargetAddrIndex } ::= { snmpTargetAddrTable 1 } SnmpTargetAddrEntry ::= SEQUENCE { snmpTargetAddrIndex Integer32, snmpTargetAddrName OCTET STRING, snmpTargetAddrPara OCTET STRING, snmpTargetAddrMgmtIf INTEGER, snmpTargetAddrIpType InetAddressType, snmpTargetAddrIp InetAddress, snmpTargetAddrPort Integer32, snmpTargetAddrTimeout Integer32, snmpTargetAddrRetry Integer32, snmpTargetAddrTag OCTET STRING, snmpTargetAddrRowStatus RowStatus } snmpTargetAddrIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp target address's index. Range is 0~31." ::= { snmpTargetAddrEntry 1 } snmpTargetAddrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the target address. Range is 1~31. " ::= { snmpTargetAddrEntry 2 } snmpTargetAddrPara OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..60)) MAX-ACCESS read-only STATUS current DESCRIPTION " The name of the param." ::= { snmpTargetAddrEntry 3 } snmpTargetAddrMgmtIf OBJECT-TYPE SYNTAX INTEGER { noUse(1), setMgmtIf(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "configuraion mgmt if. 1 noUse. 2 setMgmtIf." ::= { snmpTargetAddrEntry 4 } snmpTargetAddrIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP addresses type,IPv4(1) or IPv6(2)." ::= { snmpTargetAddrEntry 5 } snmpTargetAddrIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address." ::= { snmpTargetAddrEntry 6 } snmpTargetAddrPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address udp port 0-65535.Default value is 162." ::= { snmpTargetAddrEntry 7 } snmpTargetAddrTimeout OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout which detemine when to resend the notification 0-65535. Default value is 1500." ::= { snmpTargetAddrEntry 8 } snmpTargetAddrRetry OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout which detemine when to resend the notification 0-255. Default value is 3." ::= { snmpTargetAddrEntry 9 } snmpTargetAddrTag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Define taglist which related to notify table.Range 1~128." ::= { snmpTargetAddrEntry 10 } snmpTargetAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpTargetAddrEntry 11 } -- -- Snmp server target params Table -- snmpTargetParaTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTargetParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the target params name which related to send SNMP notifications." ::= { snmpExtMibObject 10 } snmpTargetParaEntry OBJECT-TYPE SYNTAX SnmpTargetParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpTargetParaTable." INDEX { snmpTargetParaIndex } ::= { snmpTargetParaTable 1 } SnmpTargetParaEntry ::= SEQUENCE { snmpTargetParaIndex Integer32, snmpTargetParaName OCTET STRING, snmpTargetParaUser OCTET STRING, snmpTargetParaSecLvl INTEGER, snmpTargetParaRowStatus RowStatus } snmpTargetParaIndex OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp target params's index. Range is 0~31." ::= { snmpTargetParaEntry 1 } snmpTargetParaName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the target params. Range is 1~31. " ::= { snmpTargetParaEntry 2 } snmpTargetParaUser OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the user." ::= { snmpTargetParaEntry 3 } snmpTargetParaSecLvl OBJECT-TYPE SYNTAX INTEGER { noauth(1), auth(2), priv(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp security model noauth(1): Set security level to no authentication auth(2): Set security level to authentication but with no privacy priv(3): Set security level to authentication with privacy" ::= { snmpTargetParaEntry 4 } snmpTargetParaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpTargetParaEntry 5 } -- -- Snmp server trap target-address Table -- snmpTrapAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpTrapAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Define the trap remote receiver address." ::= { snmpExtMibObject 11 } snmpTrapAddrEntry OBJECT-TYPE SYNTAX SnmpTrapAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of snmpTrapAddrTable." INDEX { snmpTrapIndex} ::= { snmpTrapAddrTable 1 } SnmpTrapAddrEntry ::= SEQUENCE { snmpTrapIndex Integer32, snmpTrapType INTEGER, snmpTrapMgmtIf INTEGER, snmpTrapAddrIptype InetAddressType, snmpTrapAddrIpAddr InetAddress, snmpTrapAddrCommunity OCTET STRING, snmpTrapAddrVersion OCTET STRING, snmpTrapAddrPort INTEGER, snmpTrapAddrRowStatus RowStatus } snmpTrapIndex OBJECT-TYPE SYNTAX Integer32 (0..95) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp trap's index." ::= { snmpTrapAddrEntry 1 } snmpTrapType OBJECT-TYPE SYNTAX INTEGER(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "configuraion type (trap:0 inform:1)." ::= { snmpTrapAddrEntry 2 } snmpTrapMgmtIf OBJECT-TYPE SYNTAX INTEGER { noUse(1), setMgmtIf(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "configuraion mgmt if. 1 noUse. 2 setMgmtIf." ::= { snmpTrapAddrEntry 3 } snmpTrapAddrIptype OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP addresses type : IPv4(1) or IPv6(2)." ::= { snmpTrapAddrEntry 4 } snmpTrapAddrIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address." ::= { snmpTrapAddrEntry 5 } snmpTrapAddrCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the community string.Range 1~255." ::= { snmpTrapAddrEntry 6 } snmpTrapAddrVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the remote receiver." ::= { snmpTrapAddrEntry 7 } snmpTrapAddrPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The trap value which area is 0 to 65535, The default is 162." ::= { snmpTrapAddrEntry 8 } snmpTrapAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { snmpTrapAddrEntry 9 } -- -- Snmp server trap enable Table -- snmpEnableTable OBJECT IDENTIFIER ::= { snmpExtMibObject 12 } snmpTrapColdstart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable cold start trap. Enable(1), disable(2)." DEFVAL { disable } ::= { snmpEnableTable 1 } snmpTrapWarmstart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable warm start trap. Enable(1), disable(2)." DEFVAL { disable } ::= { snmpEnableTable 2 } snmpTrapLinkdown OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable linkdown trap. Enable(1), disable(2)." DEFVAL { disable } ::= { snmpEnableTable 3 } snmpTrapLinkup OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable linkup trap. Enable(1), disable(2)." DEFVAL { disable } ::= { snmpEnableTable 4 } snmpTrapAll OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Enable all snmp trap. Enable(1), disable(2)." DEFVAL { disable } ::= { snmpEnableTable 5 } snmpTrapGeneralEvents OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Enable all general event traps. Enable(1), disable(2)." DEFVAL { enable } ::= { snmpEnableTable 6 } snmpLock OBJECT-TYPE SYNTAX INTEGER { lock(1), unlocked(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Setting this to lock(1) will only succeed when the CLI is NOT in configuration mode otherwise a badValue(3) in SNMPv1 and an inconsistentValue(12) in SNMPv2 and SNMPv3 will be returned indicating that the CLI is in configuration mode. If the CLI is NOT in configuration mode, the SNMP processing will be performed and the value of this object will immediately return to unlocked(2) state as soon as the SNMP processing takes place. Retrieving this object through SNMP will always returned unlocked(2). A typical usage will be to include this object as the first variable binding in all SET requests. If the SET request will fail because the CLI is in configuration mode, the GET-RESPONSE will contain an error with the first variable binding which indicates that the CLI is in configuration mode." ::= { snmpExtMibObject 13 } snmpAccessGroup OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The applied SNMP acl name." ::= { snmpExtMibObject 14 } snmpSysContact OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify SNMP system contact parameter. Range 0~255. 0 is No command." ::= { snmpExtMibObject 15 } snmpSysLocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specity SNMP system location parameter. Range 0~255. 0 is No command." ::= { snmpExtMibObject 16 } snmpInformReties OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times to retry an Inform request. <0~100>." ::= { snmpExtMibObject 18 } snmpInformTimeout OBJECT-TYPE SYNTAX INTEGER(1..1800) MAX-ACCESS read-only STATUS current DESCRIPTION "Snmp inform Timeout value, in seconds. <1~1800>." ::= { snmpExtMibObject 19 } -- Sub Module: STM stmMibObject OBJECT IDENTIFIER ::= { stm 1 } -- --current profile -- stmCurrentType OBJECT-TYPE SYNTAX INTEGER { default(0), ipv4(1), vlan(2), ipv6(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM type: default(0) provide balance to all features. ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. ipv6(3) provide maximum system utilization for IPv6 unicast routing. hardware(50) provide default hardware configure." DEFVAL { default } ::= { stmMibObject 1 } -- --Next profile -- stmNextType OBJECT-TYPE SYNTAX INTEGER { default(0), ipv4(1), vlan(2), ipv6(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "STM type: default(0) provide balance to all features. ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. ipv6(3) provide maximum system utilization for IPv6 unicast routing. hardware(50) provide default hardware configure." DEFVAL { default } ::= { stmMibObject 2 } -- -- Show STM profile Table -- stmShowTable OBJECT-TYPE SYNTAX SEQUENCE OF StmShowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show switch table Management profile." ::= { stmMibObject 3 } stmShowEntry OBJECT-TYPE SYNTAX StmShowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of stmShowTable by kilo." INDEX { stmShowProfileType } ::= { stmShowTable 1 } StmShowEntry ::= SEQUENCE { stmShowProfileType INTEGER, stmShowVlanNumber Integer32, stmShowVlanForwardingInstances Integer32, stmShowUcastMacAddresses Integer32, stmShowMcastMacAddresses Integer32, stmShowBlackholeMacAddresses Integer32, stmShowMaxAppliedVlanMapping Integer32, stmShowCfmLocalAndRemoteMeps Integer32, stmShowG8031Groups Integer32, stmShowG8032Rings Integer32, stmShowMacBasedVlanClassification Integer32, stmShowIpv4BasedVlanClassification Integer32, stmShowIpv6BasedVlanClassification Integer32, stmShowIpv4HostRoutes Integer32, stmShowIndirectIpv4Routes Integer32, stmShowIpv4EcmpGroups Integer32, stmShowIpv6HostRoutes Integer32, stmShowIndirectIpv6Routes Integer32, stmShowIpv6EcmpGroups Integer32, stmShowIpTunnelPeers Integer32, stmShowNatForIviPeers Integer32, stmShowIpv4McastRoutes Integer32, stmShowIpv4McastTotalMembers Integer32, stmShowIpv6McastRoutes Integer32, stmShowIpv6McastTotalMembers Integer32, stmShowIpv4SourceGuardEntries Integer32, stmShowIpv6SourceGuardEntries Integer32, stmShowIpv4AclAndQosFlowEntries Integer32, stmShowIpv6AclAndQosFlowEntries Integer32, stmShowFtn Integer32, stmShowIncomingLabelMap Integer32, stmShowVpws Integer32, stmShowLspPe Integer32, stmShowLspP Integer32, stmShowVplsPeer Integer32, stmShowVplsAc Integer32, stmShowVplsInstance Integer32, stmShowLspOam Integer32, stmShowOamForPseudoWrie Integer32, stmShowMplsApsTunnel Integer32, stmShowVlanMappingEntryAppliedPort Integer32, stmShowVlanMemberPorts Integer32, stmShowVlanMappingDefaultEntry Integer32, stmShowL2mcMemberPorts Integer32, stmShowL2mcv6Entries Integer32, stmShowL2mcv6MemberPorts Integer32, stmShowPBREntries Integer32, stmShowPBRv6Entries Integer32, stmShowVoiceVlan Integer32, stmShowG8032MemberPortsPerRing Integer32, stmShowMPLSLables Integer32, stmShowBFDSessions Integer32 } stmShowProfileType OBJECT-TYPE SYNTAX INTEGER { default(1), access(2), ipucv4(3), vlan(4), l2vpn(5), route(6), v4acl(7), v6acl(8), ipucv6(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure." ::= { stmShowEntry 1 } stmShowVlanNumber OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN number" DEFVAL { 0 } ::= { stmShowEntry 2 } stmShowVlanForwardingInstances OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN forwarding instances" DEFVAL { 0 } ::= { stmShowEntry 3 } stmShowUcastMacAddresses OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ucast MAC addresses" DEFVAL { 0 } ::= { stmShowEntry 4 } stmShowMcastMacAddresses OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Mcast MAC addresses" DEFVAL { 0 } ::= { stmShowEntry 5 } stmShowBlackholeMacAddresses OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Blackhole MAC addresses" DEFVAL { 0 } ::= { stmShowEntry 6 } stmShowMaxAppliedVlanMapping OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Max applied VLAN mapping" DEFVAL { 0 } ::= { stmShowEntry 7 } stmShowCfmLocalAndRemoteMeps OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "CFM local and remote MEPs" DEFVAL { 0 } ::= { stmShowEntry 8 } stmShowG8031Groups OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "G.8031 groups" DEFVAL { 0 } ::= { stmShowEntry 9 } stmShowG8032Rings OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "G.8032 rings" DEFVAL { 0 } ::= { stmShowEntry 10 } stmShowMacBasedVlanClassification OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC based VLAN classification" DEFVAL { 0 } ::= { stmShowEntry 11 } stmShowIpv4BasedVlanClassification OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 based VLAN classification" DEFVAL { 0 } ::= { stmShowEntry 12 } stmShowIpv6BasedVlanClassification OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 based VLAN classification" DEFVAL { 0 } ::= { stmShowEntry 13 } stmShowIpv4HostRoutes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 host routes" DEFVAL { 0 } ::= { stmShowEntry 14 } stmShowIndirectIpv4Routes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indirect IPv4 routes" DEFVAL { 0 } ::= { stmShowEntry 15 } stmShowIpv4EcmpGroups OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 ECMP groups" DEFVAL { 0 } ::= { stmShowEntry 16 } stmShowIpv6HostRoutes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 host routes" DEFVAL { 0 } ::= { stmShowEntry 17 } stmShowIndirectIpv6Routes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indirect IPv6 routes" DEFVAL { 0 } ::= { stmShowEntry 18 } stmShowIpv6EcmpGroups OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 ECMP groups" DEFVAL { 0 } ::= { stmShowEntry 19 } stmShowIpTunnelPeers OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IP Tunnel Peers" DEFVAL { 0 } ::= { stmShowEntry 20 } stmShowNatForIviPeers OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "NAT For IVI Peers" DEFVAL { 0 } ::= { stmShowEntry 21 } stmShowIpv4McastRoutes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 Mcast routes" DEFVAL { 0 } ::= { stmShowEntry 22 } stmShowIpv4McastTotalMembers OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 Mcast total members" DEFVAL { 0 } ::= { stmShowEntry 23 } stmShowIpv6McastRoutes OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 Mcast routes" DEFVAL { 0 } ::= { stmShowEntry 24 } stmShowIpv6McastTotalMembers OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 Mcast total members" DEFVAL { 0 } ::= { stmShowEntry 25 } stmShowIpv4SourceGuardEntries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 source guard entries" DEFVAL { 0 } ::= { stmShowEntry 26 } stmShowIpv6SourceGuardEntries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 source guard entries" DEFVAL { 0 } ::= { stmShowEntry 27 } stmShowIpv4AclAndQosFlowEntries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 ACL/QOS flow entries" DEFVAL { 0 } ::= { stmShowEntry 28 } stmShowIpv6AclAndQosFlowEntries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 ACL/QOS flow entries" DEFVAL { 0 } ::= { stmShowEntry 29 } stmShowFtn OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "FTN" DEFVAL { 0 } ::= { stmShowEntry 30 } stmShowIncomingLabelMap OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming Label Map" DEFVAL { 0 } ::= { stmShowEntry 31 } stmShowVpws OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "vpws" DEFVAL { 0 } ::= { stmShowEntry 32 } stmShowLspPe OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "LSP PE" DEFVAL { 0 } ::= { stmShowEntry 33 } stmShowLspP OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "LSP P" DEFVAL { 0 } ::= { stmShowEntry 34 } stmShowVplsPeer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VPLS PEER" DEFVAL { 0 } ::= { stmShowEntry 35 } stmShowVplsAc OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VPLS AC" DEFVAL { 0 } ::= { stmShowEntry 36 } stmShowVplsInstance OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "VPLS Instance" DEFVAL { 0 } ::= { stmShowEntry 37 } stmShowLspOam OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "LSP OAM" DEFVAL { 0 } ::= { stmShowEntry 38 } stmShowOamForPseudoWrie OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "OAM for Pseudo Wrie" DEFVAL { 0 } ::= { stmShowEntry 39 } stmShowMplsApsTunnel OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "MPLS APS Tunnel" DEFVAL { 0 } ::= { stmShowEntry 40 } stmShowVlanMappingEntryAppliedPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan Mapping Entry Applied Port" DEFVAL { 0 } ::= { stmShowEntry 41 } stmShowVlanMemberPorts OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan Member Ports" DEFVAL { 0 } ::= { stmShowEntry 42 } stmShowVlanMappingDefaultEntry OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan Mapping Default Entry" DEFVAL { 0 } ::= { stmShowEntry 43 } stmShowL2mcMemberPorts OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "L2mc Member Ports" DEFVAL { 0 } ::= { stmShowEntry 44 } stmShowL2mcv6Entries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "L2mcv6 Entries" DEFVAL { 0 } ::= { stmShowEntry 45 } stmShowL2mcv6MemberPorts OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "L2mcv6 Member Ports" DEFVAL { 0 } ::= { stmShowEntry 46 } stmShowPBREntries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "PBR Entries" DEFVAL { 0 } ::= { stmShowEntry 47 } stmShowPBRv6Entries OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "PBRv6 Entries" DEFVAL { 0 } ::= { stmShowEntry 48 } stmShowVoiceVlan OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Voice Vlan" DEFVAL { 0 } ::= { stmShowEntry 49 } stmShowG8032MemberPortsPerRing OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "G8032 Member Ports Per Ring" DEFVAL { 0 } ::= { stmShowEntry 50 } stmShowMPLSLables OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "MPLS Lables" DEFVAL { 0 } ::= { stmShowEntry 51 } stmShowBFDSessions OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "BFD Sessions" DEFVAL { 0 } ::= { stmShowEntry 52 } -- Sub Module: DNSCLIENT dnsClientMibObject OBJECT IDENTIFIER ::= { dnsClient 1 } -- -- add/remove a static host -- dnsClientHostTable OBJECT-TYPE SYNTAX SEQUENCE OF DnsClientHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of DNS host." ::= { dnsClientMibObject 1 } dnsClientHostEntry OBJECT-TYPE SYNTAX DnsClientHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of DNS clients host." INDEX { dnsClientHostIpHostIndex } ::= { dnsClientHostTable 1 } DnsClientHostEntry ::= SEQUENCE { dnsClientHostIpHostIndex INTEGER, dnsClientHostIpHostName OCTET STRING , dnsClientHostIpAddress IpAddress, dnsClientHostRowStatus RowStatus } dnsClientHostIpHostIndex OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS host IP's index." ::= { dnsClientHostEntry 1 } dnsClientHostIpHostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS host IP host name." ::= { dnsClientHostEntry 2 } dnsClientHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DNS host IP addresses." ::= { dnsClientHostEntry 3 } dnsClientHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dnsClientHostEntry 4 } -- -- add/remove a static domain -- dnsClientDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF DnsClientDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of DNS domain." ::= { dnsClientMibObject 2 } dnsClientDomainEntry OBJECT-TYPE SYNTAX DnsClientDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of DNS domain." INDEX { dnsClientDomainIndex } ::= { dnsClientDomainTable 1 } DnsClientDomainEntry ::= SEQUENCE { dnsClientDomainIndex INTEGER, dnsClientDomainName OCTET STRING, dnsClientDomainRowStatus RowStatus } dnsClientDomainIndex OBJECT-TYPE SYNTAX INTEGER (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS domain's index." ::= { dnsClientDomainEntry 1 } dnsClientDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS domain name." -- DEFVAL { ipv4 } ::= { dnsClientDomainEntry 2 } dnsClientDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dnsClientDomainEntry 3 } -- -- add/remove a static DNS server -- dnsClientServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DnsClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of DNS server." ::= { dnsClientMibObject 3 } dnsClientServerEntry OBJECT-TYPE SYNTAX DnsClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of DNS clients server." INDEX { dnsClientServerIpAddress } ::= { dnsClientServerTable 1 } DnsClientServerEntry ::= SEQUENCE { -- dnsClientServerIpAddressType -- InetAddressType, dnsClientServerIpAddress IpAddress, dnsClientServerRowStatus RowStatus } --dnsClientServerIpAddressType OBJECT-TYPE -- SYNTAX InetAddressType -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "DNS host IP addresses type (IPv4 or IPv6)." -- DEFVAL { ipv4 } -- ::= { dnsClientServerEntry 1 } dnsClientServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "DNS host IP addresses." ::= { dnsClientServerEntry 1 } dnsClientServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dnsClientServerEntry 2 } -- Sub Module: SSH -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== sshServer OBJECT IDENTIFIER ::= { ssh 1 } -- --sshServerEnable -- sshServerEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSH server status (enable(1) or disable(2)). Default value is enable(1)." DEFVAL{ 1 } ::= { sshServer 1 } -- --sshServerVersion -- sshServerVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2), all(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSH server version. v1(1), SSH version v1 v2(2), SSH version v2 all(3), SSH version v1 and v2. Default value is v2(2)." DEFVAL{ 2 } ::= { sshServer 2 } -- --sshServerAuthTimer -- sshServerAuthTimer OBJECT-TYPE SYNTAX Integer32(1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH server login grace time.Range 1~120. Default value is 120." DEFVAL{ 120 } ::= { sshServer 3 } -- --sshServerAuthRetries -- sshServerAuthRetries OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH server max authentication retry times.Range 1~6. Default value is 6." DEFVAL{ 6 } ::= { sshServer 4 } -- --sshServerAuthType -- sshServerAuthType OBJECT-TYPE SYNTAX INTEGER { password(1), rsa(2), publicKey(3), passwordRsa(4), passwordPublicKey(5), rsaPublicKey(6), all(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "SSH server authentication type. password(1): Enable password authentication rsa(2): Enable SSHv1 RSA authentication publicKey(3): Enable SSHv2 public key authentication passwordRsa(4): Enable password and sshv1 Rsa authentication passwordPublicKey(5): Enable password and sshv2 public-key authentication. rsaPublicKey(6): Enable sshv1 rsa and sshv2 public-key authentication. all(7): Enable all authentication type. Default value is 5." DEFVAL{ 5 } ::= { sshServer 5 } -- --sshServerRekeyInterval -- sshServerRekeyInterval OBJECT-TYPE SYNTAX Integer32(1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Rekey interval of ip ssh server.Range 1~1440. Default value is 60." DEFVAL{ 60 } ::= { sshServer 6 } sshRsaKey OBJECT IDENTIFIER ::= { ssh 2 } -- --sshImportRsaKeyTable -- sshImportRsaKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF SshImportRsaKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp community configure." ::= { sshRsaKey 8 } sshImportRsaKeyEntry OBJECT-TYPE SYNTAX SshImportRsaKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of sshImportRsaKeyTable." INDEX { sshImportRsaKeyIndex } ::= { sshImportRsaKeyTable 1 } SshImportRsaKeyEntry ::= SEQUENCE { sshImportRsaKeyIndex INTEGER, sshImportRsaKeyName OCTET STRING, sshImportRsaMgmtIf INTEGER, sshImportRsaKeyGenType INTEGER, sshImportRsaKeyBits Integer32, sshImportRsaKeyFileName OCTET STRING, sshImportRsaKeyType INTEGER, sshImportRsaKeyFormatType INTEGER, sshImportRsaKeyPasswd OCTET STRING, sshImportRsaKeyRowStatus RowStatus } sshImportRsaKeyIndex OBJECT-TYPE SYNTAX INTEGER (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SSH rsa key's index.Range 0~31." ::= { sshImportRsaKeyEntry 1 } sshImportRsaKeyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH rsa key's name.Range 1~31" ::= { sshImportRsaKeyEntry 2 } sshImportRsaMgmtIf OBJECT-TYPE SYNTAX INTEGER { getValue(0), noUse(1), setMgmtIf(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "configuraion mgmt-if.getValue(0),no use(1),setMgmtIf(2)." ::= { sshImportRsaKeyEntry 3 } sshImportRsaKeyGenType OBJECT-TYPE SYNTAX INTEGER { autoGen(1), localFile(2), ftpFile(3), tftpFile(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshImportRsaKeyGenType,Now only support auto-gen and local file. if autoGen is selected the index is invalid, it will select the index itself. 1 autoGen. 2 localFile. 3 ftpFile. 4 tftpFile." ::= { sshImportRsaKeyEntry 4 } sshImportRsaKeyBits OBJECT-TYPE SYNTAX Integer32(768..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "sshImportRsaKeyBits.Range 768~4096." ::= { sshImportRsaKeyEntry 5 } sshImportRsaKeyFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "sshImportRsaKeyFileName.Range 0~63." ::= { sshImportRsaKeyEntry 6 } sshImportRsaKeyType OBJECT-TYPE SYNTAX INTEGER { public(1), private(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshImportRsaKeyGenType public(1): Import public key private(2): Import private key" ::= { sshImportRsaKeyEntry 7 } sshImportRsaKeyFormatType OBJECT-TYPE SYNTAX INTEGER { der(1), derHex(2), pem(3), ssh1(4), ssh2(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshImportRsaKeyGenType der(1): DER format derHex(2): DER HEX format pem(3): PEM format ssh1(4): SSHv1 format ssh2(5): SSHv2 format" ::= { sshImportRsaKeyEntry 8 } sshImportRsaKeyPasswd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH rsa key's Password.Range 6~256." ::= { sshImportRsaKeyEntry 9} sshImportRsaKeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { sshImportRsaKeyEntry 10 } -- --sshExportRsaKeyTable -- sshExportRsaKeyTable OBJECT-TYPE SYNTAX SEQUENCE OF SshExportRsaKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Snmp community configure." ::= { sshRsaKey 9 } sshExportRsaKeyEntry OBJECT-TYPE SYNTAX SshExportRsaKeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of sshExportRsaKeyTable." INDEX { sshExportRsaKeyIndex } ::= { sshExportRsaKeyTable 1 } SshExportRsaKeyEntry ::= SEQUENCE { sshExportRsaKeyIndex INTEGER, sshExportRsaKeyName OCTET STRING, sshExportRsaMgmtIf INTEGER, sshExportRsaKeyExType INTEGER, sshExportRsaKeyFileName OCTET STRING, sshExportRsaKeyType INTEGER, sshExportRsaKeyFormatType INTEGER, sshExportRsaKeyEncryptType INTEGER, sshExportRsaKeyPassword OCTET STRING, sshExportRsaKeyRowStatus RowStatus } sshExportRsaKeyIndex OBJECT-TYPE SYNTAX INTEGER (0) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SSH rsa key's index." ::= { sshExportRsaKeyEntry 1 } sshExportRsaKeyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..60)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH rsa key's name.Range 1~60." ::= { sshExportRsaKeyEntry 2 } sshExportRsaMgmtIf OBJECT-TYPE SYNTAX INTEGER { getValue(0), noUse(1), setMgmtIf(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "configuraion mgmt-if.getValue(0),no use(1),setMgmtIf(2)." ::= { sshExportRsaKeyEntry 3 } sshExportRsaKeyExType OBJECT-TYPE SYNTAX INTEGER { localFile(1), ftpFile(2), tftpFile(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshExportRsaKeyGenType,Now only support local-file. 1 localFile. 2 ftpFile. 3 tftpFile." ::= { sshExportRsaKeyEntry 4 } sshExportRsaKeyFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "sshExportRsaKeyFileName.Range 0~256." ::= { sshExportRsaKeyEntry 5 } sshExportRsaKeyType OBJECT-TYPE SYNTAX INTEGER { public(1), private(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshExportRsaKeyGenType public(1): Export public key private(2): Export private key" ::= { sshExportRsaKeyEntry 6 } sshExportRsaKeyFormatType OBJECT-TYPE SYNTAX INTEGER { der(1), derHex(2), pem(3), ssh1(4), ssh2(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshExportRsaKeyGenType der(1): DER format derHex(2): DER HEX format pem(3): PEM format ssh1(4): SSHv1 format ssh2(5): SSHv2 format" ::= { sshExportRsaKeyEntry 7 } sshExportRsaKeyEncryptType OBJECT-TYPE SYNTAX INTEGER { des(1), des3(2), aes128(3), aes192(4), aes256(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "sshExportRsaKeyEncryptType des(1): Encrypt the private key with DES des3(2): Encrypt the private key with Triple DES aes128(3): Encrypt the private key with AES 128 bits aes192(4): Encrypt the private key with AES 192 bits aes256(5): Encrypt the private key with AES 256 bits" ::= { sshExportRsaKeyEntry 8 } sshExportRsaKeyPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH rsa key's Password.Range 6~256." ::= { sshExportRsaKeyEntry 9 } sshExportRsaKeyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { sshExportRsaKeyEntry 10 } sshHostKey OBJECT IDENTIFIER ::= { ssh 3 } -- --sshHostKeyRsaTable -- sshHostKeyRsaTable OBJECT-TYPE SYNTAX SEQUENCE OF SshHostKeyRsaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ssh server rsa host key." ::= { sshHostKey 7 } sshHostKeyRsaEntry OBJECT-TYPE SYNTAX SshHostKeyRsaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of sshHostKeyRsaTable." INDEX { sshHostKeyRsaIndex } ::= { sshHostKeyRsaTable 1 } SshHostKeyRsaEntry ::= SEQUENCE { sshHostKeyRsaIndex INTEGER, sshHostKeyRsaName OCTET STRING, sshHostKeyRsaRowStatus RowStatus } sshHostKeyRsaIndex OBJECT-TYPE SYNTAX INTEGER (0) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SSH rsa key's index." ::= { sshHostKeyRsaEntry 1 } sshHostKeyRsaName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "SSH rsa key's name. The rsa key should be exist first by sshRsaKey node. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)" ::= { sshHostKeyRsaEntry 2 } sshHostKeyRsaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { sshHostKeyRsaEntry 3 } -- Sub Module: DHCP dhcpGlobal OBJECT IDENTIFIER ::= { dhcp 1 } dhcpEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPStatus (enable or disable)." DEFVAL { disable } ::= { dhcpGlobal 1 } dhcpSnoop OBJECT IDENTIFIER ::= { dhcp 2 } dhcpSnoopEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP SnoopingStatus (enable or disable)." DEFVAL { disable } ::= { dhcpSnoop 1 } dhcpSnoopVerMac OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Snooping verify mac-address (enable or disable)." DEFVAL { enable } ::= { dhcpSnoop 2 } dhcpSnoopOption82 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Snooping option-82 data insertion (enable or disable)." DEFVAL { disable } ::= { dhcpSnoop 3 } dhcpSnoopOption82AllowUntrusted OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Snooping allow untrusted ports to accept incoming DHCP packets with relay agent information." DEFVAL { disable } ::= { dhcpSnoop 4 } dhcpSnoopAutoSaveInterval OBJECT-TYPE SYNTAX INTEGER (15..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify DHCP snooping database auto save parameter." DEFVAL { 600 } ::= { dhcpSnoop 5 } dhcpSnoopVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnoopVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure and monitor DHCP Snooping STATUS of VLANs." ::= { dhcpSnoop 6 } dhcpSnoopVlanEntry OBJECT-TYPE SYNTAX DhcpSnoopVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry information about dhcpSnoopVlanTable." INDEX { dhcpSnoopVlanIndex } ::= { dhcpSnoopVlanTable 1 } DhcpSnoopVlanEntry ::= SEQUENCE { dhcpSnoopVlanIndex Integer32, dhcpSnoopVlanEnable TruthValue } dhcpSnoopVlanIndex OBJECT-TYPE SYNTAX Integer32(0..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "current VLAN index." ::= { dhcpSnoopVlanEntry 1 } dhcpSnoopVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP SnoopingStatus ofcurrent VLAN." -- DEFVAL INDEX { false } ::= { dhcpSnoopVlanEntry 2 } dhcpSnoopBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnoopBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of DHCP clients listened by DHCP snooping and it's enabled or disabled by setting dhcpSnoopEnable node." ::= { dhcpSnoop 7 } dhcpSnoopBindingEntry OBJECT-TYPE SYNTAX DhcpSnoopBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of DHCP clients." INDEX { dhcpSnoopClientVlan, dhcpSnoopClientMacAddress } ::= { dhcpSnoopBindingTable 1 } DhcpSnoopBindingEntry ::= SEQUENCE { dhcpSnoopClientVlan Integer32, dhcpSnoopClientMacAddress MacAddress, dhcpSnoopClientIpAddressType InetAddressType, dhcpSnoopClientIpAddress InetAddress, dhcpSnoopClientIfindex Integer32, dhcpSnoopClientExpiry Integer32, dhcpSnoopClientRowStatus RowStatus } dhcpSnoopClientVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP clients' vlan id collected by DHCP snooping." ::= { dhcpSnoopBindingEntry 1 } dhcpSnoopClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCP clients' MAC addresses collected by DHCP snooping." ::= { dhcpSnoopBindingEntry 2 } dhcpSnoopClientIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP clients' IP addresses type (IPv4 or IPv6). For DHCPv4 snooping, only support ipv4(1)." -- DEFVAL { ipv4 } ::= { dhcpSnoopBindingEntry 3 } dhcpSnoopClientIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP clients' IP addresses collected by DHCP snooping." ::= { dhcpSnoopBindingEntry 4 } dhcpSnoopClientIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface collected by DHCP snooping." ::= { dhcpSnoopBindingEntry 5 } dhcpSnoopClientExpiry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "dhcp snooping Expiry" ::= { dhcpSnoopBindingEntry 6 } dhcpSnoopClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dhcpSnoopBindingEntry 7 } -- --dhcpSnoopTrustTable -- dhcpSnoopTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnoopTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure and monitor port trustedStatus ." ::= { dhcpSnoop 8 } dhcpSnoopTrustEntry OBJECT-TYPE SYNTAX DhcpSnoopTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about trustedStatus of ports." INDEX { ifIndex } ::= { dhcpSnoopTrustTable 1 } DhcpSnoopTrustEntry ::= SEQUENCE { dhcpSnoopTrustStatus INTEGER } dhcpSnoopTrustStatus OBJECT-TYPE SYNTAX INTEGER { trusted(1), untrusted(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "TrustedStatus ofcurrent port which supports both get and set operation." DEFVAL { untrusted } ::= { dhcpSnoopTrustEntry 1 } -- --dhcpSnoopStatisticsGroup -- dhcpSnoopStatisticsGroup OBJECT IDENTIFIER ::= { dhcpSnoop 9 } dhcpSnoopDHCPPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DHCP packets received by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 1 } dhcpSnoopBootpPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BOOTP packets received by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 2 } dhcpSnoopFwdPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets forwarded by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 3 } dhcpSnoopInvalidPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid packets received by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 4 } dhcpSnoopMacVerifyFailedPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MAC address verify failed packets received by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 5 } dhcpSnoopDroppedPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of dropped packets received by DHCP Snooping." ::= { dhcpSnoopStatisticsGroup 6 } dhcpSnoopStatisticsReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the packet statistics." ::= { dhcpSnoopStatisticsGroup 7 } -- --dhcpSnoopClearAllBinding -- dhcpSnoopClearAllBinding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the dhcp snoop binding." ::= { dhcpSnoop 10 } dhcpSnoopRemoteIdFormatHostName OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The format type for the remote id ." ::= { dhcpSnoop 11 } dhcpSnoopRemoteIdFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to format remote id of option 82 for dhcpsnooping." ::= { dhcpSnoop 12 } dhcpSnoopCircuitIdFormatTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpSnoopCircuitIdFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure circuit id format on interface." ::= { dhcpSnoop 13 } dhcpSnoopCircuitIdFormatEntry OBJECT-TYPE SYNTAX DhcpSnoopCircuitIdFormatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of circuit id format on interface." INDEX { ifIndex, dhcpSnoopCircuitIdFormatVlan } ::= { dhcpSnoopCircuitIdFormatTable 1 } DhcpSnoopCircuitIdFormatEntry ::= SEQUENCE { dhcpSnoopCircuitIdFormatVlan Integer32, dhcpSnoopCircuitIdFormatString OCTET STRING, dhcpSnoopCircuitIdFormatRowStatus RowStatus } dhcpSnoopCircuitIdFormatVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan id for the Circuit Id format entry." ::= { dhcpSnoopCircuitIdFormatEntry 1 } dhcpSnoopCircuitIdFormatString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This node to configure circuit id of option 82 for dhcpsnooping." ::= { dhcpSnoopCircuitIdFormatEntry 2 } dhcpSnoopCircuitIdFormatRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dhcpSnoopCircuitIdFormatEntry 3 } -- -- -- =====================Dhcp relay definition begin====================== -- -- dhcpRelay OBJECT IDENTIFIER ::= { dhcp 3 } -- -- dhcpRGlobal -- dhcpRGlobal OBJECT IDENTIFIER ::= { dhcpRelay 1 } -- --dhcpREnable -- dhcpREnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP relayStatus (enable or disable)." DEFVAL { disable } ::= { dhcpRGlobal 1 } dhcpROption82TrustAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Trust all interfaces for dhcp relay information." ::= { dhcpRGlobal 2 } -- --dhcpRIntf -- dhcpRIntf OBJECT IDENTIFIER ::= { dhcpRelay 3 } -- --dhcpRIfOption82TrustTable -- dhcpRIfOption82TrustTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpRIfOption82TrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring the interface that trust dhcp relay information." ::= { dhcpRIntf 1 } dhcpRIfOption82TrustEntry OBJECT-TYPE SYNTAX DhcpRIfOption82TrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring the interface that trust dhcp relay information." INDEX { ifIndex } ::= { dhcpRIfOption82TrustTable 1 } DhcpRIfOption82TrustEntry ::= SEQUENCE { dhcpRIfOption82Trust TruthValue } dhcpRIfOption82Trust OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Trust dhcp relay information." ::= { dhcpRIfOption82TrustEntry 1 } -- --dhcpRIfSelectTable -- dhcpRIfSelectTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpRIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring relay select server for interfaces." ::= { dhcpRIntf 2 } dhcpRIfSelectEntry OBJECT-TYPE SYNTAX DhcpRIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring relay select server for interfaces." INDEX { ifIndex } ::= { dhcpRIfSelectTable 1 } DhcpRIfSelectEntry ::= SEQUENCE { dhcpRIfSelectserver INTEGER } dhcpRIfSelectserver OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify DHCP server group number." ::= { dhcpRIfSelectEntry 1 } -- -- dhcpRServer -- dhcpRServer OBJECT IDENTIFIER ::= { dhcpRelay 2 } dhcpROption82Switch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the value is enabled, DHCP relay supporting option 82 function would be enabled." DEFVAL { disable } ::= { dhcpRServer 1 } dhcpROption82Check OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP relay option-82 data check.If the value is enabled, DHCP relay will validate relay information in BOOTREPLY." DEFVAL { enable } ::= { dhcpRServer 2 } dhcpROption82HandleStrategy OBJECT-TYPE SYNTAX INTEGER { replace(1), keep(2), drop(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one." DEFVAL { keep } ::= { dhcpRServer 3 } -- --dhcpRIpToGroupTable -- dhcpRIpToGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF DHCPRIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring ip addresses for DHCP server groups." ::= { dhcpRServer 4 } dhcpRIpToGroupEntry OBJECT-TYPE SYNTAX DHCPRIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring ip addresses for a DHCP server group. " INDEX { dhcpRIpToGroupGroupId } ::= { dhcpRIpToGroupTable 1 } DHCPRIpToGroupEntry ::= SEQUENCE { dhcpRIpToGroupGroupId Integer32, dhcpRIpToGroupServerIp OCTET STRING, dhcpRIpToGroupRowStatus RowStatus } dhcpRIpToGroupGroupId OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group identifier of DHCP server group." ::= { dhcpRIpToGroupEntry 1 } dhcpRIpToGroupServerIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Ip address of DHCP server.For example: 1.1.1.1,2.2.2.2 " ::= { dhcpRIpToGroupEntry 2 } dhcpRIpToGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { dhcpRIpToGroupEntry 3 } -- --dhcpRStatisticsGroup -- dhcpRStatisticsGroup OBJECT IDENTIFIER ::= { dhcpRServer 5 } dhcpRRxClientPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCP clients by DHCP relay. " ::= { dhcpRStatisticsGroup 1 } dhcpRRxServerPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCP Servers by DHCP relay. " ::= { dhcpRStatisticsGroup 2 } dhcpRRxClientErrPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the error packets received from DHCP clients by DHCP relay. " ::= { dhcpRStatisticsGroup 3 } dhcpRRxServerErrPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the error packets received from DHCP Servers by DHCP relay. " ::= { dhcpRStatisticsGroup 4 } dhcpRBogusAddrDropsPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Bogus GIADDR drops packets handled by DHCP relay. " ::= { dhcpRStatisticsGroup 5 } dhcpRBadCircuitIDPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Bad circuit ID packets handled by DHCP relay. " ::= { dhcpRStatisticsGroup 6 } dhcpRCorruptedAgentOpPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP corrupted agent options packets handled by DHCP relay. " ::= { dhcpRStatisticsGroup 7 } dhcpRMissAgentOpPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Missing agent options packets handled by DHCP relay. " ::= { dhcpRStatisticsGroup 8 } dhcpRMissCircuitIDPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the DHCP Missing circuit IDs packets handled by DHCP relay. " ::= { dhcpRStatisticsGroup 9 } dhcpRStatisticsReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the packet statistics. " ::= { dhcpRStatisticsGroup 10 } -- dhcpv6 dhcpv6Global OBJECT IDENTIFIER ::= { dhcp 6 } dhcpv6Enable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 Status (enable or disable)." DEFVAL { disable } ::= { dhcpv6Global 1 } dhcpv6Snoop OBJECT IDENTIFIER ::= { dhcp 7 } dhcpv6SnoopGlobal OBJECT IDENTIFIER ::= { dhcpv6Snoop 1 } dhcpv6SnoopEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 Snooping Status (enable or disable)." DEFVAL { disable } ::= { dhcpv6SnoopGlobal 1 } dhcpv6SnoopAutoSaveInterval OBJECT-TYPE SYNTAX INTEGER (15..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify DHCPv6 snooping database auto save parameter." DEFVAL { 600 } ::= { dhcpv6SnoopGlobal 2 } dhcpv6SnoopClearAllBinding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the dhcpv6 snoop binding." DEFVAL { false } ::= { dhcpv6SnoopGlobal 3 } dhcpv6SnoopVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Dhcpv6SnoopVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure and monitor DHCPv6 Snooping status of VLANs." ::= { dhcpv6Snoop 2 } dhcpv6SnoopVlanEntry OBJECT-TYPE SYNTAX Dhcpv6SnoopVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry information about dhcpv6SnoopVlanTable." INDEX { dhcpv6SnoopVlanIndex } ::= { dhcpv6SnoopVlanTable 1 } Dhcpv6SnoopVlanEntry ::= SEQUENCE { dhcpv6SnoopVlanIndex Integer32, dhcpv6SnoopVlanEnable TruthValue } dhcpv6SnoopVlanIndex OBJECT-TYPE SYNTAX Integer32(0..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "current VLAN index." ::= { dhcpv6SnoopVlanEntry 1 } dhcpv6SnoopVlanEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 Snooping Status of current VLAN." DEFVAL { false } ::= { dhcpv6SnoopVlanEntry 2 } dhcpv6SnoopBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dhcpv6SnoopBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of DHCPv6 clients listened by DHCPv6 snooping and it's enabled or disabled by setting dhcpv6SnoopEnable node." ::= { dhcpv6Snoop 3 } dhcpv6SnoopBindingEntry OBJECT-TYPE SYNTAX Dhcpv6SnoopBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of DHCPv6 clients." INDEX { dhcpv6SnoopClientVlan, dhcpv6SnoopClientMacAddress } ::= { dhcpv6SnoopBindingTable 1 } Dhcpv6SnoopBindingEntry ::= SEQUENCE { dhcpv6SnoopClientVlan Integer32, dhcpv6SnoopClientMacAddress MacAddress, dhcpv6SnoopClientIpAddressType InetAddressType, dhcpv6SnoopClientIpAddress InetAddress, dhcpv6SnoopClientIfindex Integer32, dhcpv6SnoopClientExpiry Integer32, dhcpv6SnoopClientRowStatus RowStatus } dhcpv6SnoopClientVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPv6 clients' vlan id collected by DHCPv6 snooping." ::= { dhcpv6SnoopBindingEntry 1 } dhcpv6SnoopClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "DHCPv6 clients' MAC addresses collected by DHCPv6 snooping." ::= { dhcpv6SnoopBindingEntry 2 } dhcpv6SnoopClientIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 clients' IP addresses type (IPv4 or IPv6). For DHCPv6 snooping, only support ipv6(2)." -- DEFVAL { ipv6 } ::= { dhcpv6SnoopBindingEntry 3 } dhcpv6SnoopClientIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 clients' IP addresses collected by DHCPv6 snooping." ::= { dhcpv6SnoopBindingEntry 4 } dhcpv6SnoopClientIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface collected by DHCPv6 snooping." ::= { dhcpv6SnoopBindingEntry 5 } dhcpv6SnoopClientExpiry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "dhcpv6 snooping Expiry" ::= { dhcpv6SnoopBindingEntry 6 } dhcpv6SnoopClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { dhcpv6SnoopBindingEntry 7 } -- --dhcpv6SnoopTrustTable -- dhcpv6SnoopTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF Dhcpv6SnoopTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to configure and monitor port trustedStatus ." ::= { dhcpv6Snoop 4 } dhcpv6SnoopTrustEntry OBJECT-TYPE SYNTAX Dhcpv6SnoopTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about trusted status of ports." INDEX { ifIndex } ::= { dhcpv6SnoopTrustTable 1 } Dhcpv6SnoopTrustEntry ::= SEQUENCE { dhcpv6SnoopTrust INTEGER } dhcpv6SnoopTrust OBJECT-TYPE SYNTAX INTEGER { trusted(1), untrusted(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Trusted status of current port which enable dhcpv6 snooping." DEFVAL { untrusted } ::= { dhcpv6SnoopTrustEntry 1 } -- --dhcpv6SnoopStatisticsGroup -- dhcpv6SnoopStatisticsGroup OBJECT IDENTIFIER ::= { dhcpv6Snoop 5 } dhcpv6SnoopDHCPv6PktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DHCPv6 packets received by DHCPv6 Snooping." ::= { dhcpv6SnoopStatisticsGroup 1 } dhcpv6SnoopFwdPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets forwarded by DHCPv6 Snooping." ::= { dhcpv6SnoopStatisticsGroup 2 } dhcpv6SnoopInvalidPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid packets received by DHCPv6 Snooping." ::= { dhcpv6SnoopStatisticsGroup 3 } dhcpv6SnoopDroppedPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of dropped packets received by DHCPv6 Snooping." ::= { dhcpv6SnoopStatisticsGroup 4 } dhcpv6SnoopStatisticsReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the packet statistics." ::= { dhcpv6SnoopStatisticsGroup 64 } -- -- =====================Dhcpv6 relay definition begin====================== -- dhcpv6Relay OBJECT IDENTIFIER ::= { dhcp 8 } -- -- dhcpv6RGlobal -- dhcpv6RGlobal OBJECT IDENTIFIER ::= { dhcpv6Relay 1 } -- --dhcpv6REnable -- dhcpv6REnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 relay status (enable or disable)." DEFVAL { disable } ::= { dhcpv6RGlobal 1 } -- -- dhcpv6RServer -- dhcpv6RServer OBJECT IDENTIFIER ::= { dhcpv6Relay 2 } -- --dhcpv6RIpToGroupTable -- dhcpv6RIpToGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF DHCPv6RIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring ip addresses for DHCPv6 server groups." ::= { dhcpv6RServer 1 } dhcpv6RIpToGroupEntry OBJECT-TYPE SYNTAX DHCPv6RIpToGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring ip addresses for a DHCPv6 server group. " INDEX { dhcpv6RIpToGroupGroupId } ::= { dhcpv6RIpToGroupTable 1 } DHCPv6RIpToGroupEntry ::= SEQUENCE { dhcpv6RIpToGroupGroupId Integer32, dhcpv6RIpToGroupServerIpIf OCTET STRING, dhcpv6RIpToGroupRowStatus RowStatus } dhcpv6RIpToGroupGroupId OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group identifier of DHCPv6 server group." ::= { dhcpv6RIpToGroupEntry 1 } dhcpv6RIpToGroupServerIpIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-write STATUS current DESCRIPTION "Ipv6 address of DHCPv6 server.For example: 2001:1::1" ::= { dhcpv6RIpToGroupEntry 2 } dhcpv6RIpToGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { dhcpv6RIpToGroupEntry 3 } -- --dhcpv6RIfSelectTable -- dhcpv6RIfSelectTable OBJECT-TYPE SYNTAX SEQUENCE OF Dhcpv6RIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring relay select server for interfaces." ::= { dhcpv6RServer 2 } dhcpv6RIfSelectEntry OBJECT-TYPE SYNTAX Dhcpv6RIfSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring relay select server for interfaces." INDEX { ifIndex } ::= { dhcpv6RIfSelectTable 1 } Dhcpv6RIfSelectEntry ::= SEQUENCE { dhcpv6RIfSelectserver INTEGER } dhcpv6RIfSelectserver OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify DHCPv6 server group number." ::= { dhcpv6RIfSelectEntry 1 } -- dhcpv6ROption OBJECT IDENTIFIER ::= { dhcpv6Relay 3 } -- dhcpv6RRemoteid OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 remote-id option." DEFVAL { disable } ::= { dhcpv6ROption 1 } dhcpv6RRemoteidFormatDuid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use DUID in DHCPv6 remote-id format." DEFVAL { true } ::= { dhcpv6ROption 2 } dhcpv6RRemoteidFormatIfname OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use name of interface in DHCPv6 remote-id format." DEFVAL { true } ::= { dhcpv6ROption 3 } dhcpv6RRemoteidFormatVlan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use vlan in DHCPv6 remote-id format." DEFVAL { false } ::= { dhcpv6ROption 4 } dhcpv6RPDrouteEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DHCPv6 prefix-delegation route learning (enable or disable)." DEFVAL { disable } ::= { dhcpv6ROption 5 } dhcpv6RPDrouteDistance OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default distance for prefix-delegation route learned by DHCPv6 relay." DEFVAL { 254 } ::= { dhcpv6ROption 6 } dhcpv6RPDrouteAllClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the prefix-delegation route." ::= { dhcpv6ROption 7 } dhcpv6RPDrouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Dhcpv6RPDrouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An table for prefix-delegation route." ::= { dhcpv6ROption 8 } dhcpv6RPDrouteEntry OBJECT-TYPE SYNTAX Dhcpv6RPDrouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for prefix-delegation route." INDEX { dhcpv6RPDrouteId } ::= { dhcpv6RPDrouteTable 1 } Dhcpv6RPDrouteEntry ::= SEQUENCE { dhcpv6RPDrouteId Unsigned32, dhcpv6RPDrouteIf Integer32, dhcpv6RPDrouteClientIp OCTET STRING, dhcpv6RPDroutePrefix OCTET STRING, dhcpv6RPDrouteExpiry Unsigned32, dhcpv6RPDrouteRowStatus RowStatus } dhcpv6RPDrouteId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of DHCPv6 prefix-delegation route item." ::= { dhcpv6RPDrouteEntry 1 } dhcpv6RPDrouteIf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The name of interface to DHCPv6 client." ::= { dhcpv6RPDrouteEntry 2 } dhcpv6RPDrouteClientIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "DHCPv6 PD clients' Ipv6 address." ::= { dhcpv6RPDrouteEntry 3 } dhcpv6RPDroutePrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..42)) MAX-ACCESS read-only STATUS current DESCRIPTION "DHCPv6 prefix-delegation prefix." ::= { dhcpv6RPDrouteEntry 4 } dhcpv6RPDrouteExpiry OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lease of DHCPv6 prefix-delegation prefix." ::= { dhcpv6RPDrouteEntry 5 } dhcpv6RPDrouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { dhcpv6RPDrouteEntry 6 } -- dhcpv6RStatisticsGroup OBJECT IDENTIFIER ::= { dhcpv6Relay 4 } -- dhcpv6RRxClientPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCPv6 clients by DHCPv6 relay. " ::= { dhcpv6RStatisticsGroup 1 } dhcpv6RRxServerPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the packets received from DHCPv6 Servers by DHCPv6 relay. " ::= { dhcpv6RStatisticsGroup 2 } dhcpv6RRxClientErrPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the error packets received from DHCPv6 clients by DHCPv6 relay. " ::= { dhcpv6RStatisticsGroup 3 } dhcpv6RRxServerErrPktNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the error packets received from DHCPv6 Servers by DHCPv6 relay. " ::= { dhcpv6RStatisticsGroup 4 } dhcpv6RStatisticsReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true,it will clear all of the packet statistics. " ::= { dhcpv6RStatisticsGroup 64 } -- Sub Module: LSWDEVMMIB -- ================================================================== lswdevMMibObject OBJECT-IDENTITY STATUS current DESCRIPTION "Description." ::= { lswdevMMib 1 } devMFanMibObject OBJECT IDENTIFIER ::= { lswdevMMibObject 1 } devMFanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DevMFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan status description table" ::= { devMFanMibObject 1 } devMFanStatusEntry OBJECT-TYPE SYNTAX DevMFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Fan status description table entry" INDEX {devMFanPosition, devMFanModuleId, devMFanIndex } ::= { devMFanStatusTable 1 } DevMFanStatusEntry ::= SEQUENCE { devMFanPosition INTEGER, devMFanModuleId INTEGER, devMFanIndex INTEGER, devMFanStatus INTEGER, devMFanSpeed OCTET STRING, devMFanLowSpeed INTEGER, devMFanHighSpeed INTEGER, devMFanSpeedAdjust INTEGER, devMFanSetSpeed INTEGER } devMFanPosition OBJECT-TYPE SYNTAX INTEGER { default (1), left (2), right (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Fan position type: 1-default, 2-left, 3-right. " ::= { devMFanStatusEntry 1 } devMFanModuleId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Fan Module id." ::= { devMFanStatusEntry 2 } devMFanIndex OBJECT-TYPE SYNTAX INTEGER (1..18) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan number" ::= { devMFanStatusEntry 3 } devMFanStatus OBJECT-TYPE SYNTAX INTEGER { active (1), deactive (2), notInstall (3), unsupport (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "FanStatus : active (1), deactive (2) not installed (3) and unsupported (4)." ::= { devMFanStatusEntry 4 } devMFanSpeed OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Fan speed(RPM)" ::= { devMFanStatusEntry 5 } devMFanLowSpeed OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Fan speed low threshold(RPM)." ::= { devMFanStatusEntry 6 } devMFanHighSpeed OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Fan speed high threshold(RPM)." ::= { devMFanStatusEntry 7 } devMFanSpeedAdjust OBJECT-TYPE SYNTAX INTEGER { unsupport (0), support (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether fan support speed adjust, 0 mean unsupport, 1 mean support." ::= { devMFanStatusEntry 8 } devMFanSetSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Config speed value." ::= { devMFanStatusEntry 9 } --devMFanTemperatureTable OBJECT-TYPE -- SYNTAX SEQUENCE OF DevMFanTemperatureEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Fan temperature description table" -- ::= { devMFanMibObject 2 } -- -- --devMFanTemperatureEntry OBJECT-TYPE -- SYNTAX DevMFanTemperatureEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Fan temperature description entry" -- INDEX { devMFanTemperatureLocation, devMFanTemperatureIndex} -- ::= { devMFanTemperatureTable 1 } -- -- --DevMFanTemperatureEntry ::= -- SEQUENCE -- { -- devMFanTemperatureLocation INTEGER, -- devMFanTemperatureIndex Integer32, -- devMFanTemperatureValue Integer32, -- devMFanTemperatureLow Integer32, -- devMFanTemperatureHigh INTEGER -- } -- -- --devMFanTemperatureLocation OBJECT-TYPE -- SYNTAX INTEGER -- { -- default(1), -- left(2), -- right(3) -- } -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Fan sensor position type: 1-default, 2-left, 3-right" -- ::= { devMFanTemperatureEntry 1 } -- --devMFanTemperatureIndex OBJECT-TYPE -- SYNTAX Integer32 (1..16) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Fan sensor number" -- ::= { devMFanTemperatureEntry 2 } -- --devMFanTemperatureValue OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Fan sensor temperature" -- ::= { devMFanTemperatureEntry 3 } -- --devMFanTemperatureLow OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Fan sensor temperature low" -- ::= { devMFanTemperatureEntry 4 } -- --devMFanTemperatureHigh OBJECT-TYPE -- SYNTAX INTEGER (50..90) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Fan sensor temperature high" -- ::= { devMFanTemperatureEntry 5 } devMPowerStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DevMPowerStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power status description table." ::= { lswdevMMibObject 2 } devMPowerStatusEntry OBJECT-TYPE SYNTAX DevMPowerStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power status description table entry." INDEX { devMPowerIndex } ::= { devMPowerStatusTable 1 } DevMPowerStatusEntry ::= SEQUENCE { devMPowerIndex INTEGER, devMPowerStatus INTEGER, devMPowerWorkStatus INTEGER, devMPowerType INTEGER, devMPowerFanStatus INTEGER, devMPowerControlStatus INTEGER, devMPowerAlertStatus INTEGER } devMPowerIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power number." ::= { devMPowerStatusEntry 1 } devMPowerStatus OBJECT-TYPE SYNTAX INTEGER { present (1), absent (2), unsupport (3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Power whole device status: present (1), absent (2), unsupport (3)." ::= { devMPowerStatusEntry 2 } devMPowerWorkStatus OBJECT-TYPE SYNTAX INTEGER { active (1), deactive (2), notInstall (3), unsupport (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Power status: active (1), deactive (2) not installed (3) and unsupported (4). " ::= { devMPowerStatusEntry 3 } devMPowerType OBJECT-TYPE SYNTAX INTEGER { ac (1), dc (2), unknow (3), notInstall (4), unsupport (5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Power status: AC (1), DC (2), UNKNOW (3), notInstall (4) and unsupported (5)." ::= { devMPowerStatusEntry 4 } devMPowerFanStatus OBJECT-TYPE SYNTAX INTEGER { active (1), deactive (2), notInstall (3), unsupport (4) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Power status: work (1), failed (2) not installed (3) and unsupported (4). " ::= { devMPowerStatusEntry 5 } devMPowerControlStatus OBJECT-TYPE SYNTAX INTEGER { on (1), down (2), uninstall (3), unsupported (4) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Power status: on (1), down (2), uninstall(3), unsupported(4)." ::= { devMPowerStatusEntry 6 } devMPowerAlertStatus OBJECT-TYPE SYNTAX INTEGER { noAlert (1), alert (2), unsupported (3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Power status: noAlert (1), alert (2), unsupported(3)." ::= { devMPowerStatusEntry 7 } devMSlotEnvironmentTable OBJECT-TYPE SYNTAX SEQUENCE OF DevMSlotEnvironmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Environment description table " ::= { lswdevMMibObject 3 } devMSlotEnvironmentEntry OBJECT-TYPE SYNTAX DevMSlotEnvironmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Environment DESCRIPTION table entry." INDEX { devMSlotEnvironmentType, devMSlotEnvironmentSlot, devMSlotEnvironmentIndex} ::= { devMSlotEnvironmentTable 1 } DevMSlotEnvironmentEntry ::= SEQUENCE { devMSlotEnvironmentType INTEGER, devMSlotEnvironmentSlot Integer32, devMSlotEnvironmentIndex Integer32, devMSlotEnvironmentValue Integer32, devMSlotEnvironmentCriticalLimit INTEGER, devMSlotEnvironmentUpperLimit INTEGER, devMSlotEnvironmentLowerLimit INTEGER } devMSlotEnvironmentType OBJECT-TYPE SYNTAX INTEGER { temperature(1), humidity(2), fog(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environment type. 1-temperature, 2-humidity, 3-fog. only support temperature(1) now, Not support humidity(2) and flog(3)." ::= { devMSlotEnvironmentEntry 1 } devMSlotEnvironmentSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environment slot number." ::= { devMSlotEnvironmentEntry 2 } devMSlotEnvironmentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environment index. For temperature,max temperature sensor num is 6." ::= { devMSlotEnvironmentEntry 3 } devMSlotEnvironmentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Environment value." ::= { devMSlotEnvironmentEntry 4 } devMSlotEnvironmentCriticalLimit OBJECT-TYPE SYNTAX INTEGER (55..90) MAX-ACCESS read-write STATUS current DESCRIPTION "Environment critical temperature threshold, unit is Celsius." ::= { devMSlotEnvironmentEntry 5 } devMSlotEnvironmentUpperLimit OBJECT-TYPE SYNTAX INTEGER (50..85) MAX-ACCESS read-write STATUS current DESCRIPTION "Environment high temperature threshold, unit is Celsius." ::= { devMSlotEnvironmentEntry 6 } devMSlotEnvironmentLowerLimit OBJECT-TYPE SYNTAX INTEGER (-15..50) MAX-ACCESS read-write STATUS current DESCRIPTION " Environment Low temperature threshold, unit is Celsius." ::= { devMSlotEnvironmentEntry 7 } --linkUpDownTrapEnable OBJECT-TYPE -- SYNTAX INTEGER -- { -- enableBoth(1) , -- disableBoth(2) , -- enableLinkUpTrapOnly(3) , -- enableLinkDownTrapOnly(4) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Enable/Disable linkUp/linkDown traps of the device, determining whether -- to enable linkUp/linkDown traps with that of the interface. -- When the value is enableBoth(1), the linkUp/linkDown traps are both -- enabled. -- When the value is disableBoth(2), the linkUp/linkDown traps are both -- disabled. -- When the value is enableLinkUpTrapOnly(3), the linkUp traps is enabled -- and the linkDown traps is disabled. -- When the value is enableLinkDownTrapOnly(4), the linkUp traps is -- disabled and the linkDown traps is enabled." -- ::= { lswdevMMibObject 9 } -- --dot1qTpFdbLearnStatus OBJECT-TYPE -- SYNTAX INTEGER -- { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION " Enable/Disable the address learning." -- ::= { lswdevMMibObject 10 } -- -- -- --cfmWriteFlash OBJECT-TYPE -- SYNTAX INTEGER -- { -- write(1) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION " Write thecurrent effective configuration into the Flash memory. -- This object does not support read operation." -- ::= { lswdevMMibObject 11 } -- -- --cfmEraseFlash OBJECT-TYPE -- SYNTAX INTEGER -- { -- erase(1) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION " Delete the configuration from the Flash memory. -- This object does not support read operation." -- ::= { lswdevMMibObject 12 } -- -- -- ================================================================== -- -- Frame information table -- -- ================================================================== --lswFrameTable OBJECT-TYPE -- SYNTAX SEQUENCE OF LswFrameEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Frame information table." -- ::= {lswdevMMibObject 4} -- --lswFrameEntry OBJECT-TYPE -- SYNTAX LswFrameEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Frame description table entry." -- INDEX { lswFrameIndex } -- ::= {lswFrameTable 1} -- --LswFrameEntry ::= -- SEQUENCE -- { -- lswFrameIndex Integer32, -- lswFrameType Integer32, -- lswFrameDesc OCTET STRING , -- lswSlotNumber Integer32, -- lswFrameAdminStatus INTEGER, -- lswFrameOperStatus INTEGER -- } -- --lswFrameIndex OBJECT-TYPE -- SYNTAX Integer32 (0..65535) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The unique index of frame." -- ::= {lswFrameEntry 1} -- --lswFrameType OBJECT-TYPE -- SYNTAX Integer32 (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Frame type." -- ::= {lswFrameEntry 2} -- --lswFrameDesc OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE(0..64)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Frame description." -- ::= {lswFrameEntry 3} -- --lswSlotNumber OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Number of slots of thecurrent frame." -- ::= {lswFrameEntry 4} -- --lswFrameAdminStatus OBJECT-TYPE -- SYNTAX INTEGER -- { -- normal (1), -- fault (2), -- other (3) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The status of frame." -- ::= {lswFrameEntry 5} -- --lswFrameOperStatus OBJECT-TYPE -- SYNTAX INTEGER -- { -- disable (1), -- enable (2), -- haReload (3), -- haSwitchover (4), -- syncStartupConfig (5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The operationStatus of frame." -- ::= {lswFrameEntry 6} -- ================================================================== -- -- slot information table -- -- ================================================================== lswSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF LswSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot description table." ::= {lswdevMMibObject 5} lswSlotEntry OBJECT-TYPE SYNTAX LswSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot description table entry." INDEX { lswSlotFrameIndex, lswSlotIndex } ::= {lswSlotTable 1} LswSlotEntry ::= SEQUENCE { lswSlotFrameIndex Integer32, lswSlotIndex Integer32, lswSlotConfigType OCTET STRING, lswSlotCurrentType OCTET STRING, lswSlotStatus OCTET STRING, lswSlotSupStatus OCTET STRING, lswSlotPortNumber Integer32, lswSlotHwVer OCTET STRING, lswSlotRom OCTET STRING, lswSlotSerialNo OCTET STRING } lswSlotFrameIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Frame index. Now we only support 1." ::= {lswSlotEntry 1} lswSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Slot index." ::= {lswSlotEntry 2} lswSlotConfigType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configed Slot type. Include SUP-1, LC-24S, LC-24T, LC-2X8S, LC-2X8ST." ::= {lswSlotEntry 3} lswSlotCurrentType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current Slot type. Include SUP-1, LC-24S, LC-24T, LC-2X8S, LC-2X8ST." ::= {lswSlotEntry 4} lswSlotStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Slot status. Include absent, creating, initing, syncing, fail, ready, uninit, conflict." ::= {lswSlotEntry 5} lswSlotSupStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The supervisor card status. This node is just for supervisor card. Include Active and Standby." ::= {lswSlotEntry 6} lswSlotPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of the ports on the card in this slot. On supervisor the number is 0." ::= {lswSlotEntry 7} lswSlotHwVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the card in this slot. If the line card is absent, none info will be printed." ::= {lswSlotEntry 8} lswSlotRom OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The bootrom version of the card in this slot. If the line card is absent, none info will be printed." ::= {lswSlotEntry 9} lswSlotSerialNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the card in this Slot. If the line card is absent, none info will be printed." ::= {lswSlotEntry 10} -- ================================================================== -- -- sub slot information table -- -- ================================================================== --lswSubslotTable OBJECT-TYPE -- SYNTAX SEQUENCE OF LswSubslotEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Subslot DESCRIPTION table." -- ::= {lswdevMMibObject 6} -- --lswSubslotEntry OBJECT-TYPE -- SYNTAX LswSubslotEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Subslot DESCRIPTION table entry." -- INDEX -- { -- lswFrameIndex, -- lswSlotIndex, -- lswSubslotIndex -- } -- ::= {lswSubslotTable 1} -- --LswSubslotEntry ::= -- SEQUENCE -- { -- lswSubslotFrameIndex -- Integer32, -- lswSubslotSlotIndex -- Integer32, -- lswSubslotIndex -- Integer32, -- lswSubslotType -- INTEGER, -- lswSubslotPortNum -- Integer32, -- lswSubslotAdminStatus -- INTEGER, -- lswSubslotOperStatus -- INTEGER -- } --lswSubslotFrameIndex OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Fram index." -- ::= {lswSubslotEntry 1} -- --lswSubslotSlotIndex OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "slot index." -- ::= {lswSubslotEntry 2} -- --lswSubslotIndex OBJECT-TYPE -- SYNTAX Integer32 (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Subslot index." -- ::= {lswSubslotEntry 3} -- -- value list of lswSubslotType are identical with the value list of lswSlotType. --lswSubslotType OBJECT-TYPE -- SYNTAX INTEGER -- { -- subcard4GE(1), -- subcard1XG(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Type of the pinch board in the subslot." -- ::= {lswSubslotEntry 4} -- --lswSubslotPortNum OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Number of physical ports in the pinch board." -- ::= {lswSubslotEntry 5} -- -- --lswSubslotAdminStatus OBJECT-TYPE -- SYNTAX INTEGER -- { -- normal (1), -- fault (2), -- forbidden (3) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the pinch board in the subslot." -- ::= {lswSubslotEntry 6} -- --lswSubslotOperStatus OBJECT-TYPE -- SYNTAX INTEGER -- { -- firstattach(0), -- present(1), -- absent(2), -- available(3), -- unavailable(4), -- clearConfig (5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Slot operationStatus ." -- ::= {lswSubslotEntry 7} lswDiagnosticBootupLevel OBJECT-TYPE SYNTAX INTEGER { noDiagnostic (1), minimal (2), complete (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Diagnostic Bootup Level. noDiagnostic (1), minimal (2), complete (3). The configured value will be valid after next reload. The return value is the current bootup diag level." ::= { lswdevMMibObject 7 } --transceiverSfpMonitorResult OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (0..255)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This string only for transceiver Sfp Monitor warning and alarm message traps -- can not read and write." -- ::= { lswdevMMibObject 9 } transinformation OBJECT-IDENTITY STATUS current DESCRIPTION "Transceiver information description." ::= { lswdevMMibObject 10 } transbasicinformationTable OBJECT-TYPE SYNTAX SEQUENCE OF TransbasicinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the basic information for transceiver." ::= {transinformation 1} transbasicinformationEntry OBJECT-TYPE SYNTAX TransbasicinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the basic information for transceiver." INDEX {ifIndex} ::= {transbasicinformationTable 1} TransbasicinformationEntry ::= SEQUENCE{ transceiveType OCTET STRING, transceiveVender OCTET STRING, transceivePartNumber OCTET STRING, transceiveSerialNumber OCTET STRING, transceiveWaveLength Integer32, link9SinglemodeLengthKm Integer32, link9SinglemodeLengthM Integer32, link50MultimodeLength Integer32, link62MultimodeLength Integer32, linkCopperLength Integer32, transceiveStatus OCTET STRING, transceiveMointorStatus OCTET STRING } transceiveType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver type. For example: 1000BASE-LX, 1000BASE-SX, 10GBASE-SR and so on." ::= {transbasicinformationEntry 1} transceiveVender OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver vender name." ::= {transbasicinformationEntry 2} transceivePartNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver PN information" ::= {transbasicinformationEntry 3} transceiveSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver serial number information." ::= {transbasicinformationEntry 4} transceiveWaveLength OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver Wavelength ,unit is nm(nanometer)." ::= {transbasicinformationEntry 5} link9SinglemodeLengthKm OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Length for 9/125um single mode fiber,unit is km(kilometer)." ::= {transbasicinformationEntry 6} link9SinglemodeLengthM OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Length for 9/125um single mode fiber,unit is m(meter)." ::= {transbasicinformationEntry 7} link50MultimodeLength OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Length for 50/125um multi-mode fiber,unit is m(meter)." ::= {transbasicinformationEntry 8} link62MultimodeLength OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Length for 62.5/125um multi-mode fiber,unit is m(meter)." ::= {transbasicinformationEntry 9} linkCopperLength OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Length for copper,unit is m(meter)." ::= {transbasicinformationEntry 10} transceiveStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver current status." ::= {transbasicinformationEntry 11} transceiveMointorStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver current mointor status." ::= {transbasicinformationEntry 12} -- End -- transTemperinformationTable transTemperinformationTable OBJECT-TYPE SYNTAX SEQUENCE OF TransTemperinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the temperature information for transceiver." ::= {transinformation 2} transTemperinformationEntry OBJECT-TYPE SYNTAX TransTemperinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the temperature information for transceiver." INDEX {ifIndex} ::= {transTemperinformationTable 1} TransTemperinformationEntry ::= SEQUENCE{ temperHighAlarmThreshold OCTET STRING, temperLowAlarmThreshold OCTET STRING, temperHighWarnThreshold OCTET STRING, temperLowWarnThreshold OCTET STRING, temperCurrent OCTET STRING } temperHighAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver temperature high-alarm threshold value,unit is Celsius." ::= {transTemperinformationEntry 1} temperLowAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver temperature Low-alarm threshold value, unit is Celsius." ::= {transTemperinformationEntry 2} temperHighWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver temperature high-warn threshold value,unit is Celsius." ::= {transTemperinformationEntry 3} temperLowWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver temperature low-warn threshold value,unit is Celsius." ::= {transTemperinformationEntry 4} temperCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver currently temperature value,unit is Celsius . Display 4 vlaue in the case of 40G/100G fiber." ::= {transTemperinformationEntry 5} --End --3 transVoltageinformationTable transVoltageinformationTable OBJECT-TYPE SYNTAX SEQUENCE OF TransVoltageinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the voltag information for transceiver." ::= {transinformation 3} transVoltageinformationEntry OBJECT-TYPE SYNTAX TransVoltageinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the voltag information for transceiver." INDEX {ifIndex} ::= {transVoltageinformationTable 1} TransVoltageinformationEntry ::= SEQUENCE{ voltageHighAlarmThreshold OCTET STRING, voltageLowAlarmThreshold OCTET STRING, voltageHighWarnThreshold OCTET STRING, voltageLowWarnThreshold OCTET STRING, voltageCurrent OCTET STRING } voltageHighAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver voltage high-alarm threshold value,unit is Voltage ." ::= {transVoltageinformationEntry 1} voltageLowAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver voltage Low-alarm threshold value,unit is Voltage." ::= {transVoltageinformationEntry 2} voltageHighWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver voltage high-warn threshold value,unit is Voltage." ::= {transVoltageinformationEntry 3} voltageLowWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver voltage low-warn threshold value,unit is Voltage." ::= {transVoltageinformationEntry 4} voltageCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver currently voltage value, unit is Voltage. Display 4 vlaue in the case of 40G/100G fiber." ::= {transVoltageinformationEntry 5} --End -- transBiasinformationTable transBiasinformationTable OBJECT-TYPE SYNTAX SEQUENCE OF TransBiasinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the Current information for transceiver." ::= {transinformation 4} transBiasinformationEntry OBJECT-TYPE SYNTAX TransBiasinformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the current value information for transceiver." INDEX {ifIndex} ::= {transBiasinformationTable 1} TransBiasinformationEntry ::= SEQUENCE{ biasHighAlarmThreshold OCTET STRING, biasLowAlarmThreshold OCTET STRING, biasHighWarnThreshold OCTET STRING, biasLowWarnThreshold OCTET STRING, biasCurrent OCTET STRING } biasHighAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver bias high-alarm threshold value ,unit is mA(milliamperes)." ::= {transBiasinformationEntry 1} biasLowAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver bias Low-alarm threshold value ,unit is mA(milliamperes)." ::= {transBiasinformationEntry 2} biasHighWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver current high-warn threshold value ,unit is mA(milliamperes) ." ::= {transBiasinformationEntry 3} biasLowWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver bias low-warn threshold value ,unit is mA(milliamperes)." ::= {transBiasinformationEntry 4} biasCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver currently bias value, unit is mA(milliamperes). Display 4 vlaue in the case of 40G/100G fiber." ::= {transBiasinformationEntry 5} --End -- 5 transTransmitPowerTables transTransmitPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF TransTransmitPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the Transmit Power information for transceiver." ::= {transinformation 5} transTransmitPowerEntry OBJECT-TYPE SYNTAX TransTransmitPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the Transmit Power value information for transceiver." INDEX {ifIndex} ::= {transTransmitPowerTable 1} TransTransmitPowerEntry ::= SEQUENCE{ transpowerHighAlarmThreshold OCTET STRING, transpowerLowAlarmThreshold OCTET STRING, transpowerHighWarnThreshold OCTET STRING, transpowerLowWarnThreshold OCTET STRING, transpowerCurrent OCTET STRING } transpowerHighAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver transmit power high-alarm threshold value,unit is dBm." ::= {transTransmitPowerEntry 1} transpowerLowAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver transmit power Low-alarm threshold value,unit is dBm." ::= {transTransmitPowerEntry 2} transpowerHighWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver transmit power high-warn threshold value,unit is dBm." ::= {transTransmitPowerEntry 3} transpowerLowWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver transmit power low-warn threshold value,unit is dBm." ::= {transTransmitPowerEntry 4} transpowerCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver currently transmit power value, unit is dBm. Display 4 vlaue in the case of 40G/100G fiber." ::= {transTransmitPowerEntry 5} -- 6 transReceivePowerTable transReceivePowerTable OBJECT-TYPE SYNTAX SEQUENCE OF TransReceivePowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the receive Power information for transceiver." ::= {transinformation 6} transReceivePowerEntry OBJECT-TYPE SYNTAX TransReceivePowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show the Transmit Power information for transceiver." INDEX {ifIndex} ::= {transReceivePowerTable 1} TransReceivePowerEntry ::= SEQUENCE{ receivepowerHighAlarmThreshold OCTET STRING, receivepowerLowAlarmThreshold OCTET STRING, receivepowerHighWarnThreshold OCTET STRING, receivepowerLowWarnThreshold OCTET STRING, receivepowerCurrent OCTET STRING } receivepowerHighAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver receive power high-alarm threshold value,unit is dBm." ::= {transReceivePowerEntry 1} receivepowerLowAlarmThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver receive power Low-alarm threshold value,unit is dBm." ::= {transReceivePowerEntry 2} receivepowerHighWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver receive power high-warn threshold value,unit is dBm." ::= {transReceivePowerEntry 3} receivepowerLowWarnThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver receive power low-warn threshold value,unit is dBm." ::= {transReceivePowerEntry 4} receivepowerCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver currently receive power value, unit is dBm. Display 4 vlaue in the case of 40G/100G fiber." ::= {transReceivePowerEntry 5} poeInformation OBJECT-IDENTITY STATUS current DESCRIPTION "Transceiver information description." ::= { lswdevMMibObject 13 } poeSysConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PoeSysConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of PoE system configuration." ::= { poeInformation 1 } poeSysConfigEntry OBJECT-TYPE SYNTAX PoeSysConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of PoE system configuration." INDEX { interfaceIndex } ::= { poeSysConfigTable 1 } PoeSysConfigEntry ::= SEQUENCE { poeSysConfigMaxPower INTEGER, poeSysConfigUtiliThresholdPower INTEGER, poeSysConfigReservePower INTEGER, poeSysConfigLegacy INTEGER, poeSysConfigPM INTEGER } poeSysConfigMaxPower OBJECT-TYPE SYNTAX INTEGER(15400..739200) MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE system max consumption (milli-watt)." DEFVAL { 739200 } ::= { poeSysConfigEntry 1 } poeSysConfigUtiliThresholdPower OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Set PSE alarm threshold of current consumption (percentage)." DEFVAL { 90 } ::= { poeSysConfigEntry 2 } poeSysConfigReservePower OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Set PSE reserved consumption (percentage)." DEFVAL { 20 } ::= { poeSysConfigEntry 3 } poeSysConfigLegacy OBJECT-TYPE SYNTAX INTEGER {disable(1),enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE system legacy capability.The meanings of the values are: disable(1) - Enable legacy PD detection capability; enable(2) - Disable legacy PD detection capability;" DEFVAL { disable } ::= { poeSysConfigEntry 4 } poeSysConfigPM OBJECT-TYPE SYNTAX INTEGER {manual(1),auto(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE system power management.The meanings of the values are: manual(1) - Manual mode; auto(2) - Auto mode;" DEFVAL { manual } ::= { poeSysConfigEntry 5 } poeSysStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PoeSysStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of PoE system status." ::= { poeInformation 2 } poeSysStatusEntry OBJECT-TYPE SYNTAX PoeSysStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of PoE system status information." INDEX { interfaceIndex } ::= { poeSysStatusTable 1 } PoeSysStatusEntry ::= SEQUENCE { poeSysStatusCurPower INTEGER, poeSysStatusAverPower INTEGER, poeSysStatusPeakPower INTEGER, poeSysStatusMaxPower INTEGER, poeSysStatusRemainPower INTEGER, poeSysStatusUtiliThresholdPower INTEGER, poeSysStatusReservePower INTEGER, poeSysStatusCurVoltage INTEGER, poeSysStatusAverVoltage INTEGER, poeSysStatusPeakVoltage INTEGER, poeSysStatusLegacy OCTET STRING, poeSysStatusPM OCTET STRING } poeSysStatusCurPower OBJECT-TYPE SYNTAX INTEGER(0..739200) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE total current consumption (milli-watt)." DEFVAL { 0 } ::= { poeSysStatusEntry 1 } poeSysStatusAverPower OBJECT-TYPE SYNTAX INTEGER(0..739200) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE history average consumption of certain period of time recently (milli-watt)." DEFVAL { 0 } ::= { poeSysStatusEntry 2 } poeSysStatusPeakPower OBJECT-TYPE SYNTAX INTEGER(0..739200) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE history peak consumption of certain period of time recently (milli-watt)." DEFVAL { 0 } ::= { poeSysStatusEntry 3 } poeSysStatusMaxPower OBJECT-TYPE SYNTAX INTEGER(15400..739200) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE system max consumption (milli-watt)." DEFVAL { 0 } ::= { poeSysStatusEntry 4 } poeSysStatusRemainPower OBJECT-TYPE SYNTAX INTEGER(0..739200) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE remaining power including PSE reserved power (milli-watt)." DEFVAL { 0 } ::= { poeSysStatusEntry 5 } poeSysStatusUtiliThresholdPower OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE alarm threshold of current consumption (percentage)." DEFVAL { 0 } ::= { poeSysStatusEntry 6 } poeSysStatusReservePower OBJECT-TYPE SYNTAX INTEGER(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE reserved consumption (percentage)." DEFVAL { 0 } ::= { poeSysStatusEntry 7 } poeSysStatusCurVoltage OBJECT-TYPE SYNTAX INTEGER(0..60000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE current voltage of supply power (milli-voltage)." DEFVAL { 0 } ::= { poeSysStatusEntry 8 } poeSysStatusAverVoltage OBJECT-TYPE SYNTAX INTEGER(0..60000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE average voltage of supply power of certain period of time recently (milli-voltage)." DEFVAL { 0 } ::= { poeSysStatusEntry 9 } poeSysStatusPeakVoltage OBJECT-TYPE SYNTAX INTEGER(0..60000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PSE peak voltage of supply power of certain period of time recently (milli-voltage)." DEFVAL { 0 } ::= { poeSysStatusEntry 10 } poeSysStatusLegacy OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE system legacy capability." DEFVAL { "disable" } ::= { poeSysStatusEntry 11 } poeSysStatusPM OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE system power management." DEFVAL { "manual" } ::= { poeSysStatusEntry 12 } poePortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PoePortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of PoE port status." ::= { poeInformation 3 } poePortStatusEntry OBJECT-TYPE SYNTAX PoePortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of PoE port status information." INDEX { interfaceIndex } ::= { poePortStatusTable 1 } PoePortStatusEntry ::= SEQUENCE { poePortAdmin OCTET STRING, poePortPriority OCTET STRING, poePortOper OCTET STRING, poePortClass OCTET STRING, poePortCurPower INTEGER, poePortAverPower INTEGER, poePortPeakPower INTEGER, poePortMaxPower INTEGER } poePortAdmin OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port admin." DEFVAL { "enable" } ::= { poePortStatusEntry 1 } poePortPriority OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port priority level." DEFVAL { "low" } ::= { poePortStatusEntry 2 } poePortOper OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port operating result status." ::= { poePortStatusEntry 3 } poePortClass OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port PD IEEE class level." ::= { poePortStatusEntry 4 } poePortCurPower OBJECT-TYPE SYNTAX INTEGER(0..30000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port current consumption (milli-watt)." ::= { poePortStatusEntry 5 } poePortAverPower OBJECT-TYPE SYNTAX INTEGER(0..30000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port history average consumption of certain period of time recently (milli-watt)." ::= { poePortStatusEntry 6 } poePortPeakPower OBJECT-TYPE SYNTAX INTEGER(0..30000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port history peak consumption of certain period of time recently (milli-watt)." ::= { poePortStatusEntry 7 } poePortMaxPower OBJECT-TYPE SYNTAX INTEGER(0..30000) MAX-ACCESS read-only STATUS current DESCRIPTION "Get PoE port max consumption limit (milli-watt)." ::= { poePortStatusEntry 8 } dyingGaspEvent OBJECT-TYPE SYNTAX INTEGER { occur(1), } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Get Dying Gasp State." ::= { lswdevMMibObject 14 } extCardType OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of external card. The meanings of the values are: 0 external card is absent; 1 NM-2SFP+; 2 NM-4SFP+; 3 NM-4SFP." DEFVAL { 0 } ::= { lswdevMMibObject 15 } -- Sub Module: LSWTRAPMIB lswTRAPMibObject OBJECT IDENTIFIER ::= { lswTrapMib 1 } powerabsent NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "Power supply absent." ::= { lswTRAPMibObject 1 } powerfailure NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "Power supply failure." ::= { lswTRAPMibObject 2 } powerNormal NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "Power supply normal." ::= { lswTRAPMibObject 3 } powerfanfailure NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "The fan of power supply failure." ::= { lswTRAPMibObject 4 } fanfailure NOTIFICATION-TYPE OBJECTS { devMFanPosition, devMFanModuleId, devMFanIndex } STATUS current DESCRIPTION "Fan failure." ::= { lswTRAPMibObject 5 } fanNormal NOTIFICATION-TYPE OBJECTS { devMFanPosition, devMFanModuleId, devMFanIndex } STATUS current DESCRIPTION "Fan normal." ::= { lswTRAPMibObject 6 } --linecardRemoved NOTIFICATION-TYPE -- OBJECTS {lswSlotFrameIndex, lswSlotIndex } -- STATUS current -- DESCRIPTION -- "Linecard removed." -- ::= { lswTRAPMibObject 7 } -- --linecardInserted NOTIFICATION-TYPE -- OBJECTS { lswSlotFrameIndex,lswSlotIndex } -- STATUS current -- DESCRIPTION -- "Linecard inserted." -- ::= { lswTRAPMibObject 8 } -- --subcardRemove NOTIFICATION-TYPE -- OBJECTS { lswSubslotFrameIndex, lswSubslotSlotIndex, lswSubslotIndex } -- STATUS current -- DESCRIPTION -- "Sub card removed." -- ::= { lswTRAPMibObject 9 } -- --subcardInsert NOTIFICATION-TYPE -- OBJECTS { lswSubslotFrameIndex, lswSubslotSlotIndex, lswSubslotIndex } -- STATUS current -- DESCRIPTION -- "Sub card inserted." -- ::= { lswTRAPMibObject 10 } supervisorRemove NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex } STATUS current DESCRIPTION "Supervisor card removed." ::= { lswTRAPMibObject 11 } supervisorInsert NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex } STATUS current DESCRIPTION "Supervisor card inserted." ::= { lswTRAPMibObject 12 } boardTemperatureAlarm NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex,devMSlotEnvironmentValue } STATUS current DESCRIPTION "Board temperature high." ::= { lswTRAPMibObject 13 } boardTemperatureReturnNormal NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex,devMSlotEnvironmentValue } STATUS current DESCRIPTION "Board temperature from higher to normal." ::= { lswTRAPMibObject 14 } loadFailure NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex } STATUS current DESCRIPTION "Board load failure." ::= { lswTRAPMibObject 15 } loadFinished NOTIFICATION-TYPE OBJECTS { lswSlotFrameIndex,lswSlotIndex } STATUS current DESCRIPTION "Board load finished." ::= { lswTRAPMibObject 16 } --fatalInterrupt NOTIFICATION-TYPE -- OBJECTS { lswFatalInterruptAddr,lswFatalInterruptMask } -- STATUS current -- DESCRIPTION -- "Get fatal interrupt message." -- ::= { lswTRAPMibObject 17 } transceiverInsert NOTIFICATION-TYPE OBJECTS { transceiveStatus } STATUS current DESCRIPTION "Transceiver inserted." ::= { lswTRAPMibObject 18 } transceiverRemove NOTIFICATION-TYPE OBJECTS { transceiveStatus } STATUS current DESCRIPTION "Transceiver removed." ::= { lswTRAPMibObject 19 } transceiverSfpMonitor NOTIFICATION-TYPE OBJECTS { transceiveMointorStatus } STATUS current DESCRIPTION "Transceiver Sfp Monitor has detected warning or alarm." ::= { lswTRAPMibObject 20} chsmBootupDiagTrap NOTIFICATION-TYPE OBJECTS { devMFanPosition } STATUS current DESCRIPTION "Chsm bootup diag trap." ::= { lswTRAPMibObject 21} chsmPoePortStatTrap NOTIFICATION-TYPE OBJECTS { poeInformation } STATUS current DESCRIPTION "Chsm PoE port status change trap." ::= { lswTRAPMibObject 22} chsmPoeSysConsumpThresholdTrap NOTIFICATION-TYPE OBJECTS { poeInformation } STATUS current DESCRIPTION "Chsm PoE system consumption warn threshold trap." ::= { lswTRAPMibObject 23} chsmPoePseVoltageTrap NOTIFICATION-TYPE OBJECTS { poeInformation } STATUS current DESCRIPTION "Chsm bootup diag trap." ::= { lswTRAPMibObject 24} fanAbsent NOTIFICATION-TYPE OBJECTS { devMFanIndex } STATUS current DESCRIPTION "Fan absent." ::= { lswTRAPMibObject 25 } fanPresent NOTIFICATION-TYPE OBJECTS { devMFanIndex } STATUS current DESCRIPTION "Fan present." ::= { lswTRAPMibObject 26 } powerAlert NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "Power alert." ::= { lswTRAPMibObject 27 } powerNoAlert NOTIFICATION-TYPE OBJECTS { devMPowerIndex } STATUS current DESCRIPTION "Power no alert." ::= { lswTRAPMibObject 28 } dyingGasp NOTIFICATION-TYPE OBJECTS { dyingGaspEvent } STATUS current DESCRIPTION "Local Dying Gasp Event" ::= { lswTRAPMibObject 29 } -- Sub Module: IPSOURCEGUARD -- ip source guard binding type IpSourceGuardType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "p source guard's binding type, ip, ip-mac, ip-vlan, ip-mac-vlan." SYNTAX INTEGER { disable(0), ip(1), ipMac(2), ip-vlan(3), ipMacVlan(4) } -- -- Node of ipSourceGuard max number of binding entry perport -- ipSourceGuardPerportMaximalnumber OBJECT-TYPE SYNTAX Integer32 (0..30) MAX-ACCESS read-write STATUS current DESCRIPTION "config ip source guard max number of entry perport." ::= { ipSourceGuard 1 } -- -- Nodes of ipSourceGuard entry table -- ipSourceGuardBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF IpSourceGuardBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of ip source guard binding entry. " ::= { ipSourceGuard 2 } ipSourceGuardBindingEntry OBJECT-TYPE SYNTAX IpSourceGuardBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip source guard binding entry." INDEX { ipSourceGuardIpAddress} ::= { ipSourceGuardBindingTable 1 } IpSourceGuardBindingEntry ::= SEQUENCE { ipSourceGuardIpAddress IpAddress, ipSourceGuardMacAddress OCTET STRING, ipSourceGuardVlan Integer32, iSGIfIndex Integer32, ipSourceGuardRowStatus RowStatus } ipSourceGuardIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "the ip address of a packet." ::= { ipSourceGuardBindingEntry 1 } ipSourceGuardMacAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address of a packet." ::= { ipSourceGuardBindingEntry 2 } ipSourceGuardVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID of a packet." ::= { ipSourceGuardBindingEntry 3 } iSGIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The interface from which the packet comes." ::= { ipSourceGuardBindingEntry 4 } ipSourceGuardRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ipSourceGuardBindingEntry 5 } -- -- Nodes of ipSourceGuard enable on the interface -- ipSourceGuardEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF IpSourceGuardEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for ip source guard enable . " ::= { ipSourceGuard 3 } ipSourceGuardEnableEntry OBJECT-TYPE SYNTAX IpSourceGuardEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A entry for ip source guard enable." INDEX { iSGEnableIfIndex } ::= { ipSourceGuardEnableTable 1 } IpSourceGuardEnableEntry ::= SEQUENCE { iSGEnableIfIndex Integer32, ipSourceGuardEnableType IpSourceGuardType } iSGEnableIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the interface index of isg enabled." ::= { ipSourceGuardEnableEntry 1 } ipSourceGuardEnableType OBJECT-TYPE SYNTAX IpSourceGuardType MAX-ACCESS read-write STATUS current DESCRIPTION "the enable type of ip source guard, support ip, ip-mac, ip-vlan, ip-mac-vlan." ::= { ipSourceGuardEnableEntry 2} -- Sub Module: VRRPEXT -- =================================================================== -- Start of MIB objects -- =================================================================== -- =================================================================== -- VRRP EXT Table -- =================================================================== vrrpVrfTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of vrrp vrf." ::= { vrrpExt 1 } vrrpVrfEntry OBJECT-TYPE SYNTAX VrrpVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "rip vrf entry " INDEX{ ifIndex, vrrpvrfVrId } ::= { vrrpVrfTable 1 } VrrpVrfEntry ::= SEQUENCE { vrrpvrfVrId VrId, vrrpvrfName OCTET STRING, vrrpvrfRowStatus RowStatus } vrrpvrfVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpVrfEntry 1 } vrrpvrfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "VRF name." ::= { vrrpVrfEntry 2 } vrrpvrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { vrrpVrfEntry 3 } vrrpLearnMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpLearnMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set learnmaster mode for the session." ::= { vrrpExt 2 } vrrpLearnMasterEntry OBJECT-TYPE SYNTAX VrrpLearnMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set learnmaster mode for the session." INDEX { ifIndex, vrrpLearnVrId } ::= { vrrpLearnMasterTable 1 } VrrpLearnMasterEntry ::= SEQUENCE { vrrpLearnVrId VrId, vrrpLearnMode TruthValue } vrrpLearnVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpLearnMasterEntry 1 } vrrpLearnMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Learnmaster mode." ::= { vrrpLearnMasterEntry 2 } -- Sub Module: INTERFACE interfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of interface entry." ::= { interface 1 } interfaceEntry OBJECT-TYPE SYNTAX InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface entry " INDEX { interfaceIndex} ::= { interfaceTable 1 } InterfaceEntry ::= SEQUENCE { interfaceIndex Integer32, interfaceName OCTET STRING, interfaceType INTEGER, interfaceIPv4Addr OCTET STRING, interfaceDesc OCTET STRING, interfaceMediaType INTEGER, interfaceSpeed INTEGER, interfaceDuplex INTEGER, interfaceResetCnt INTEGER, interfaceArpRetryInterval INTEGER, interfaceArpTimeout INTEGER, interfaceArpClear INTEGER, interfacejumboFrameEnable INTEGER, interfaceClearIPv4Addr INTEGER, interfaceBandwidth INTEGER, interfacePortIsolateGroupID INTEGER, interfaceArpProxy INTEGER, interfaceLocalArpProxy INTEGER, interfacePoeAdmin INTEGER, interfacePoeBudget INTEGER, interfacePoePriority INTEGER, interfaceLoadInterval INTEGER, interfaceMtu INTEGER, interfaceIpUrpf INTEGER, interfaceIpv6Urpf INTEGER, interfaceIpv6DadAttempt INTEGER, interfaceNDClear INTEGER } interfaceIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index. physical interface:0x1~0x3FF, agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF, lookback interface:0x3000~0x3FFF" ::= { interfaceEntry 1 } interfaceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { interfaceEntry 2 } interfaceType OBJECT-TYPE SYNTAX INTEGER { switch(1), route(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The interface type.1:switch 2:route." ::= { interfaceEntry 3 } interfaceIPv4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(9..18)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP addresses with mask , such as 123.123.123.123/24 ." ::= { interfaceEntry 4 } interfaceDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..240)) MAX-ACCESS read-write STATUS current DESCRIPTION "Interface specific description." ::= { interfaceEntry 5 } interfaceMediaType OBJECT-TYPE SYNTAX INTEGER { autoSelect(0), rj45(1), sfp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port media type.0:auto-select 1:rj45 2:sfp." ::= { interfaceEntry 6 } interfaceSpeed OBJECT-TYPE SYNTAX INTEGER { auto(0), speed10M(1), speed100M(2), speed1000M(3), speed10G(4), speed40G(5), speed100G(6), speed2halfG(7), speed5G(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000." ::= { interfaceEntry 7 } interfaceDuplex OBJECT-TYPE SYNTAX INTEGER { auto(0), half(1), full(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port duplexStatus .0:auto 1:half 2:full." ::= { interfaceEntry 8 } interfaceResetCnt OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset interface counters; 0: noUse, 1: resetCount." ::= { interfaceEntry 9 } interfaceArpRetryInterval OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Set arp request retry delay value to interface. Interval range 0~3." ::= { interfaceEntry 10 } interfaceArpTimeout OBJECT-TYPE SYNTAX INTEGER(1..2147483) MAX-ACCESS read-write STATUS current DESCRIPTION " Set arp age timeout value to interface. Timeout range 1~2147483. " ::= { interfaceEntry 11 } interfaceArpClear OBJECT-TYPE SYNTAX INTEGER { noUse(0), clearArp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear arp cache.0:no use, 1:clear arp. " ::= { interfaceEntry 12 } interfacejumboFrameEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Jumbo frame. 1:enabel, 2:disable" ::= { interfaceEntry 13 } interfaceClearIPv4Addr OBJECT-TYPE SYNTAX INTEGER { noUse(0), clearIPv4Addr(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address. " ::= { interfaceEntry 14 } interfaceBandwidth OBJECT-TYPE SYNTAX INTEGER(0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value. The default value of 10M port is 10000. The default value of 100M port is 100000. The default value of 1000M port is 1000000." ::= { interfaceEntry 15 } interfacePortIsolateGroupID OBJECT-TYPE SYNTAX INTEGER(1..31255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group. " ::= { interfaceEntry 16 } interfaceArpProxy OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Enable or disable arp proxy feature." DEFVAL { disable } ::= { interfaceEntry 17 } interfaceLocalArpProxy OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Enable or disable local arp proxy feature." DEFVAL { disable } ::= { interfaceEntry 18 } interfacePoeAdmin OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2),force-power(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE port admin.The meanings of the values are: enable(1) - Enable port PoE; disable(2) - Disable port PoE; force-power(3) - Force to power on port PoE;" DEFVAL { enable } ::= { interfaceEntry 19 } interfacePoeBudget OBJECT-TYPE SYNTAX INTEGER(0..30000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE port max consumption limitation (milli-watt)." DEFVAL { 30000 } ::= { interfaceEntry 20 } interfacePoePriority OBJECT-TYPE SYNTAX INTEGER{low(1),high(2),critical(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set PoE port priority level. The meanings of the value are: low(1) - Low priority; high(2) - High priority; critical(3) - critical priority;" DEFVAL { low } ::= { interfaceEntry 21 } interfaceLoadInterval OBJECT-TYPE SYNTAX INTEGER(30..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify interval for interface speed calculation. Load-interval must be in increments of 30 seconds. The load-interval ranges from 30 to 600 and default value is 300." DEFVAL { 300 } ::= { interfaceEntry 22 } interfaceMtu OBJECT-TYPE SYNTAX INTEGER(68..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set MTU of the interface." DEFVAL { 1500 } ::= { interfaceEntry 23 } interfaceIpUrpf OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set IP Unicast reverse-path of the interface." DEFVAL {disable } ::= { interfaceEntry 24 } interfaceIpv6Urpf OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set IPv6 Unicast reverse-path of the interface." DEFVAL {disable } ::= { interfaceEntry 25 } interfaceIpv6DadAttempt OBJECT-TYPE SYNTAX INTEGER(0..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Set IPv6 Duplicate address detection attempts number." DEFVAL {1} ::= { interfaceEntry 26 } interfaceNDClear OBJECT-TYPE SYNTAX INTEGER{noUse(0),clearND(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear arp cache.0:no use, 1:clear ND." ::= { interfaceEntry 27 } -- -- config interface secondary ip address -- interfaceSecondaryIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF InterfaceSecondaryIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of interface secondary ip address." ::= { interface 2 } interfaceSecondaryIpAddrEntry OBJECT-TYPE SYNTAX InterfaceSecondaryIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface entry." INDEX {interfaceIndex,ifSecondaryIpAddr} ::= { interfaceSecondaryIpAddrTable 1 } InterfaceSecondaryIpAddrEntry ::= SEQUENCE { ifSecondaryIpAddr IpAddress, ifSecondaryIpAddrMask Integer32, interfaceSecondaryIpAddrStatus RowStatus } ifSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set secondary ip address on interface." ::= { interfaceSecondaryIpAddrEntry 1 } ifSecondaryIpAddrMask OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION " Set secondary ip address mask on interface." ::= { interfaceSecondaryIpAddrEntry 2 } interfaceSecondaryIpAddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { interfaceSecondaryIpAddrEntry 3 } loopbackInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF LoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of loopback interface." ::= { interface 3 } loopbackInterfaceEntry OBJECT-TYPE SYNTAX LoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "loopback interface entry." INDEX {loopbackInterfaceNum} ::= { loopbackInterfaceTable 1 } LoopbackInterfaceEntry ::= SEQUENCE { loopbackInterfaceNum Integer32, loopbackInterfaceIndex Integer32, loopbackInterfaceStatus RowStatus } loopbackInterfaceNum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback interface." ::= { loopbackInterfaceEntry 1 } loopbackInterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of loopback interface." ::= { loopbackInterfaceEntry 2 } loopbackInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { loopbackInterfaceEntry 3 } -- -- config interface ipv6 address -- interfaceIpv6AddrTable OBJECT-TYPE SYNTAX SEQUENCE OF InterfaceIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of interface ipv6 address." ::= { interface 4 } interfaceIpv6AddrEntry OBJECT-TYPE SYNTAX InterfaceIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface ipv6 address entry." INDEX {interfaceIndex,ifIpv6Addr} ::= { interfaceIpv6AddrTable 1 } InterfaceIpv6AddrEntry ::= SEQUENCE { ifIpv6Addr OCTET STRING, ifIpv6AddrLength Integer32, ifIpv6AddrEui64 INTEGER, ifIpv6AddrLinkLocal INTEGER, ifIpv6AddrStatus RowStatus } ifIpv6Addr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set ipv6 address on interface." ::= { interfaceIpv6AddrEntry 1 } ifIpv6AddrLength OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION " Set ipv6 address prefix length." ::= { interfaceIpv6AddrEntry 2 } ifIpv6AddrEui64 OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION " Set ipv6 address use eui-64 interface identifier." DEFVAL {disable} ::= { interfaceIpv6AddrEntry 3 } ifIpv6AddrLinkLocal OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION " Set ipv6 link-local address." DEFVAL {disable} ::= { interfaceIpv6AddrEntry 4 } ifIpv6AddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { interfaceIpv6AddrEntry 5 } interfaceTrapObject OBJECT IDENTIFIER ::= { interface 10 } ifpReceiveManyErrorPacket NOTIFICATION-TYPE OBJECTS { interfaceIndex } STATUS current DESCRIPTION "Receive many CRC error packets on the interface." ::= { interfaceTrapObject 1 } -- Sub Module: MANAGEMENTIP managementIp OBJECT IDENTIFIER ::= { management 1 } managementIpTable OBJECT-TYPE SYNTAX SEQUENCE OF ManagementIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of management ip entry." ::= { managementIp 1 } managementIpEntry OBJECT-TYPE SYNTAX ManagementIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface entry " INDEX { managementIpSlot} ::= { managementIpTable 1 } ManagementIpEntry ::= SEQUENCE { managementIpSlot Integer32, managementIPv4Addr OCTET STRING, managementRowStatus RowStatus } managementIpSlot OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Management ip slot." ::= { managementIpEntry 1 } managementIPv4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP addresses with masklen. The format is like 'xxx.xxx.xxx.xxx/xx'." ::= { managementIpEntry 2 } managementRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of management IP row.Now only realize Create, Destroy and Active." ::= { managementIpEntry 3 } managementGateway OBJECT IDENTIFIER ::= { management 3 } managementIpGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF ManagementIpGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of management ip gateway entry." ::= { managementGateway 1 } managementIpGatewayEntry OBJECT-TYPE SYNTAX ManagementIpGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "management ip Gateway entry." INDEX { managementIpGatewaySlot, managementIpGateway } ::= { managementIpGatewayTable 1 } ManagementIpGatewayEntry ::= SEQUENCE { managementIpGatewaySlot Integer32, managementIpGateway IpAddress, managementIpGatewayStatus RowStatus } managementIpGatewaySlot OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Management ip gateway slot." ::= { managementIpGatewayEntry 1 } managementIpGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Management ip gateway." ::= { managementIpGatewayEntry 2 } managementIpGatewayStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { managementIpGatewayEntry 3 } -- Sub Module: MVR mvrGlobalStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Enable/Disable MVR on the switch." ::= { mvr 1 } mvrGlobalGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrGlobalGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of MVR multicast group." ::= { mvr 2 } mvrGlobalGroupEntry OBJECT-TYPE SYNTAX MvrGlobalGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR multicast group entry." INDEX { mvrGlobalGroup} ::= { mvrGlobalGroupTable 1 } MvrGlobalGroupEntry ::= SEQUENCE { mvrGlobalGroup IpAddress, mvrGlobalGroupRowStatus RowStatus } mvrGlobalGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR multicast group." ::= { mvrGlobalGroupEntry 1 } mvrGlobalGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mvrGlobalGroupEntry 2 } mvrSourceVlan OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Configure a source VLAN for MVR; 0 unset source vlan." ::= { mvr 3 } mvrSourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Mvr Source IP address. Use 0.0.0.0 to restore the default value." ::= { mvr 4 } mvrSourcePortTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrSourcePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of MVR source port." ::= { mvr 5 } mvrSourcePortEntry OBJECT-TYPE SYNTAX MvrSourcePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR source port entry." INDEX { mvrSourcePortIfindex} ::= { mvrSourcePortTable 1 } MvrSourcePortEntry ::= SEQUENCE { mvrSourcePortIfindex Integer32, mvrSourcePortRowStatus RowStatus } mvrSourcePortIfindex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR source port ifindex." ::= { mvrSourcePortEntry 1 } mvrSourcePortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mvrSourcePortEntry 2 } mvrRcvPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrRcvPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of MVR receive port." ::= { mvr 6 } mvrRcvPortEntry OBJECT-TYPE SYNTAX MvrRcvPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR receive port entry." INDEX { mvrRcvPortIfindex,mvrRcvVlanId} ::= { mvrRcvPortTable 1 } MvrRcvPortEntry ::= SEQUENCE { mvrRcvPortIfindex Integer32, mvrRcvVlanId Integer32, mvrRcvPortRowStatus RowStatus } mvrRcvPortIfindex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR receive port ifindex." ::= { mvrRcvPortEntry 1 } mvrRcvVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR receive vlan id." ::= { mvrRcvPortEntry 2 } mvrRcvPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mvrRcvPortEntry 3 } mvrIPMcastRouting OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Enable/Disable IP Multicast-routing on the switch." ::= { mvr 7 } -- Sub Module: ERPS -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== erpsDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF ErpsDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of domain entry." ::= { erps 2 } erpsDomainEntry OBJECT-TYPE SYNTAX ErpsDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "domain entry." INDEX { domainIndex} ::= { erpsDomainTable 1 } ErpsDomainEntry ::= SEQUENCE { domainIndex Integer32, domainName OCTET STRING, domainHellotime Integer32, domainFailtime Integer32, domainPrimaryControlVlan Integer32, domainSubControlVlan Integer32, domainEnable INTEGER, domainInstance Integer32, domainRowStatus RowStatus } domainIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Domain index.Range 1~255." ::= { erpsDomainEntry 1 } domainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Domain name.Range 1~16.0 means default domain name" ::= { erpsDomainEntry 2 } domainHellotime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Domain hello timer interval,the range is 1~~15.The default value is 1." ::= { erpsDomainEntry 3 } domainFailtime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Domain fail timer interval,the range is 3~~45.The default value is 3." ::= { erpsDomainEntry 4 } domainPrimaryControlVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Domain primary control vlan ,the range is 2~~4094." ::= { erpsDomainEntry 5 } domainSubControlVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Domain sub control vlan ,the range is 2~~4094." ::= { erpsDomainEntry 6 } domainEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the domain. Enable(1),Disable(2). Only support set operation." ::= { erpsDomainEntry 7 } domainInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set or unset the instance which the domain bound. the range is 0~~4094. 0 is the default value" ::= { erpsDomainEntry 8 } domainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize Destroy and Active." ::= { erpsDomainEntry 9 } --erpsDomainStatsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF ErpsDomainStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "table of domain statistics entry." -- ::= { erps 3 } -- --erpsDomainStatsEntry OBJECT-TYPE -- SYNTAX ErpsDomainStatsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Domain statistics entry." -- INDEX { domainStatsIndex} -- ::= { erpsDomainStatsTable 1 } -- --ErpsDomainStatsEntry ::= -- SEQUENCE -- { -- domainStatsIndex -- Integer32, -- domainStatsTotalSendPackets -- Unsigned32, -- domainStatsHelloSendPackets -- Unsigned32, -- domainStatsRingUpFlushFdbSendPackets -- Unsigned32, -- domainStatsRingDownFlushFdbSendPackets -- Unsigned32, -- domainStatsLinkDownSendPackets -- Unsigned32, -- domainStatsAskStateSendPackets -- Unsigned32, -- domainStatsTotalRecPackets -- Unsigned32, -- domainStatsHelloRecPackets -- Unsigned32, -- domainStatsRingUpFlushFdbRecPackets -- Unsigned32, -- domainStatsRingDownFlushFdbRecPackets -- Unsigned32, -- domainStatsLinkDownRecPackets -- Unsigned32, -- domainStatsAskStateRecPackets -- Unsigned32, -- domainStatsClearPackets -- Integer32 -- } -- --domainStatsIndex OBJECT-TYPE -- SYNTAX Integer32 (0..65535) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 1 } -- --domainStatsTotalSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 2 } -- --domainStatsHelloSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 3 } -- --domainStatsRingUpFlushFdbSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 4 } -- --domainStatsRingDownFlushFdbSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 5 } -- --domainStatsLinkDownSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 6 } -- --domainStatsAskStateSendPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 7 } -- --domainStatsTotalRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 8 } -- --domainStatsHelloRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 9 } -- --domainStatsRingUpFlushFdbRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 10 } -- --domainStatsRingDownFlushFdbRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 11 } -- --domainStatsLinkDownRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Domain statistics." -- ::= { erpsDomainStatsEntry 12 } -- --domainStatsAskStateRecPackets OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Domain statistics." -- ::= { erpsDomainStatsEntry 13 } -- --domainStatsClearPackets OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Clear domain statistics and the set number is 1." -- ::= { erpsDomainStatsEntry 14 } erpsRingTable OBJECT-TYPE SYNTAX SEQUENCE OF ErpsRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of ring entry." ::= { erps 4 } erpsRingEntry OBJECT-TYPE SYNTAX ErpsRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "domain entry " INDEX { ringIndex} ::= { erpsRingTable 1 } ErpsRingEntry ::= SEQUENCE { ringIndex Integer32, ringLevel INTEGER, ringmode INTEGER, ringEdgemode INTEGER, ringPrimaryIf OCTET STRING, ringSecondaryIf OCTET STRING, ringEdgeIf OCTET STRING, ringCommonIf OCTET STRING, ringSrpt INTEGER, ringEnable INTEGER, ringRowStatus RowStatus, ringStatus INTEGER } ringIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ring index.Range 1~255." ::= { erpsRingEntry 1 } ringLevel OBJECT-TYPE SYNTAX INTEGER { primary(0), sub(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Create ring with level.primary:0 sub:1." ::= { erpsRingEntry 2 } ringmode OBJECT-TYPE SYNTAX INTEGER { unknow(0), master(1), transit(2), vpls(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring mode.unknow:0 master:1 transit:2 vpls:3." ::= { erpsRingEntry 3 } ringEdgemode OBJECT-TYPE SYNTAX INTEGER { unknow(0), edge(1), assistantedge(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring mode.unknow:0 edge:1 assistantedge:2." ::= { erpsRingEntry 4 } ringPrimaryIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring primary port." ::= { erpsRingEntry 5 } ringSecondaryIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring primary port." ::= { erpsRingEntry 6 } ringEdgeIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring edge port." ::= { erpsRingEntry 7 } ringCommonIf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring common port." ::= { erpsRingEntry 8 } ringSrpt OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set ring srpt. enable:1 disable:2" ::= { erpsRingEntry 9 } ringEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable ring. enable:1 disable:2" ::= { erpsRingEntry 10 } ringRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize Destroy and Active." ::= { erpsRingEntry 11 } ringStatus OBJECT-TYPE SYNTAX INTEGER { idel(0), complete(1), failed(2), linkup(3), linkdown(4), preforwording(5), init(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this ring. idel(0), complete(1), failed(2), linkup(3), linkdown(4), preforwording(5), init(6)." ::= { erpsRingEntry 12 } erpsRingStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ErpsRingStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of ring statistics entry." ::= { erps 5 } erpsRingStatsEntry OBJECT-TYPE SYNTAX ErpsRingStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ring statistics entry." INDEX { ringStatsIndex} ::= { erpsRingStatsTable 1 } ErpsRingStatsEntry ::= SEQUENCE { ringStatsIndex Integer32, ringStatsTotalSendPackets Unsigned32, ringStatsHelloSendPackets Unsigned32, ringStatsRingUpFlushFdbSendPackets Unsigned32, ringStatsRingDownFlushFdbSendPackets Unsigned32, ringStatsLinkDownSendPackets Unsigned32, ringStatsEdgeHelloSendPackets Unsigned32, ringStatsMajorFaultSendPackets Unsigned32, ringStatsTotalRecPackets Unsigned32, ringStatsHelloRecPackets Unsigned32, ringStatsRingUpFlushFdbRecPackets Unsigned32, ringStatsRingDownFlushFdbRecPackets Unsigned32, ringStatsLinkDownRecPackets Unsigned32, ringStatsEdgeHelloRecPackets Unsigned32, ringStatsMajorFaultRecPackets Unsigned32, ringStatsClearPackets Integer32 } ringStatsIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 1 } ringStatsTotalSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 2 } ringStatsHelloSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 3 } ringStatsRingUpFlushFdbSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 4 } ringStatsRingDownFlushFdbSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 5 } ringStatsLinkDownSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 6 } ringStatsEdgeHelloSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 7 } ringStatsMajorFaultSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 8 } ringStatsTotalRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 9 } ringStatsHelloRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 10 } ringStatsRingUpFlushFdbRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 11 } ringStatsRingDownFlushFdbRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 12 } ringStatsLinkDownRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 13 } ringStatsEdgeHelloRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 14 } ringStatsMajorFaultRecPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ring statistics." ::= { erpsRingStatsEntry 15 } ringStatsClearPackets OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clear ring statistics and the set number is 1." ::= { erpsRingStatsEntry 16 } erpsTrapObject OBJECT IDENTIFIER ::= { erps 10 } erpsLinkSwitch NOTIFICATION-TYPE OBJECTS { ringStatus } STATUS current DESCRIPTION "Erps link change notification." ::= { erpsTrapObject 1 } -- Sub Module: PREFIXLIST -- prefix list type - permit or deny PrefixListType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "prefix list type, permit or deny." SYNTAX INTEGER { deny(1), permit(2) } -- prefix list clear value PrefixListClearValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "prefix list value: 1." SYNTAX INTEGER { clear(1) } -- prefix list sequence-use type -- PrefixListSeqUseType ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "prefix list SEQUENCE-number use type " -- SYNTAX INTEGER -- { -- useSeq(1), -- noUseSeq(2) -- } -- -- Node of prefixListSeqNumUse -- --prefixListSeqNumUse OBJECT-TYPE -- SYNTAX PrefixListSeqUseType -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "config prefix list SEQUENCE number use " -- ::= { prefixList 100 } -- -- -- -- Nodes of prefixList entry table -- prefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF PrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of prefix list entry." ::= { prefixList 1 } prefixListEntry OBJECT-TYPE SYNTAX PrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip prefix list entry." INDEX { prefixListIpAddressType, prefixListIndex} ::= { prefixListTable 1 } PrefixListEntry ::= SEQUENCE { prefixListIpAddressType InetAddressType, prefixListIndex Unsigned32, prefixListName OCTET STRING, prefixListDescription OCTET STRING, prefixListRowStatus RowStatus } prefixListIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ip type:ip or ipv6." ::= { prefixListEntry 1 } prefixListIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "prefix list index." ::= { prefixListEntry 2 } prefixListName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "prefix list name, siez (1-20)." ::= { prefixListEntry 3 } prefixListDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "The description of the prefix list, size (0-80)" ::= { prefixListEntry 4 } prefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { prefixListEntry 5 } -- -- Nodes of prefixListRule entry table -- prefixListRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF PrefixListRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of prefix list entry." ::= { prefixList 2 } prefixListRuleEntry OBJECT-TYPE SYNTAX PrefixListRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip prefix list entry." INDEX { prefixListRuleIpAddressType, prefixListRuleIndex, prefixListRuleSeq} ::= { prefixListRuleTable 1 } PrefixListRuleEntry ::= SEQUENCE { prefixListRuleIpAddressType InetAddressType, prefixListRuleIndex Unsigned32, prefixListRuleSeq Unsigned32, prefixListRuleIpAddress InetAddress, prefixListRuleMaskLen Integer32, prefixListRuleType PrefixListType, prefixListRuleGe Integer32, prefixListRuleLe Integer32, prefixListRuleRowStatus RowStatus } prefixListRuleIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ip type:ip or ipv6." ::= { prefixListRuleEntry 1 } prefixListRuleIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "prefix list index." ::= { prefixListRuleEntry 2 } prefixListRuleSeq OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence number of prefix list entry." ::= { prefixListRuleEntry 3 } prefixListRuleIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "ip or ipv6 address." ::= { prefixListRuleEntry 4 } prefixListRuleMaskLen OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The ip address mask length." ::= { prefixListRuleEntry 5 } prefixListRuleType OBJECT-TYPE SYNTAX PrefixListType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of prefix list: permit or deny." ::= { prefixListRuleEntry 6 } prefixListRuleGe OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The Minimum prefix length." ::= { prefixListRuleEntry 7 } prefixListRuleLe OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum prefix length." ::= { prefixListRuleEntry 8 } prefixListRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { prefixListRuleEntry 9 } -- -- Nodes of prefixListClear -- prefixListClearTable OBJECT-TYPE SYNTAX SEQUENCE OF PrefixListClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of prefix list entry." ::= { prefixList 3 } prefixListClearEntry OBJECT-TYPE SYNTAX PrefixListClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip prefix list clear entry." INDEX { prefixListClearIpAddressType , prefixListClearIndex } ::= { prefixListClearTable 1 } PrefixListClearEntry ::= SEQUENCE { prefixListClearIpAddressType InetAddressType, prefixListClearIndex Integer32, prefixListClear PrefixListClearValue } prefixListClearIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Clear type, ip or ipv6." ::= { prefixListClearEntry 1 } prefixListClearIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "prefix list index." ::= { prefixListClearEntry 2 } prefixListClear OBJECT-TYPE SYNTAX PrefixListClearValue MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix list clear value : the only valid value is 1." ::= { prefixListClearEntry 3 } -- -- Nodes of prefixListDetail entry table -- prefixListDetailTable OBJECT-TYPE SYNTAX SEQUENCE OF PrefixListDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of prefix list entry." ::= { prefixList 4 } prefixListDetailEntry OBJECT-TYPE SYNTAX PrefixListDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip prefix list detail entry." INDEX { prefixListDetailIpAddressType, prefixListDetailIndex, prefixListDetailSeq} ::= { prefixListDetailTable 1 } PrefixListDetailEntry ::= SEQUENCE { prefixListDetailIpAddressType InetAddressType, prefixListDetailIndex Unsigned32, prefixListDetailSeq Unsigned32, prefixListDetailLastOperEntry OCTET STRING, prefixLisDetailCount Integer32, prefixListDetailRangeEntries PrefixListType, prefixListDetailSequences OCTET STRING, prefixListDetailHitCount Integer32, prefixListDetailRefcount RowStatus } prefixListDetailIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ip type:ip or ipv6." ::= { prefixListDetailEntry 1 } prefixListDetailIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "prefix list index." ::= { prefixListDetailEntry 2 } prefixListDetailSeq OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence number of prefix list entry." ::= { prefixListDetailEntry 3 } prefixListDetailLastOperEntry OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Prefix-list with the last deletion/insertion." ::= { prefixListDetailEntry 4 } prefixLisDetailCount OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Prefix-list total Count." ::= { prefixListDetailEntry 5 } prefixListDetailRangeEntries OBJECT-TYPE SYNTAX PrefixListType MAX-ACCESS read-only STATUS current DESCRIPTION "Prefix-list range entries." ::= { prefixListDetailEntry 6 } prefixListDetailSequences OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Prefix-list Sequences." ::= { prefixListDetailEntry 7 } prefixListDetailHitCount OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "some seq of prefix-list hit count." ::= { prefixListDetailEntry 8 } prefixListDetailRefcount OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "some seq of prefix-list refcount." ::= { prefixListDetailEntry 9 } -- Sub Module: IPUNICAST ipUnicastStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpUnicastStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of ip source guard binding entry." ::= { ipUnicast 1 } ipUnicastStaticRouteEntry OBJECT-TYPE SYNTAX IpUnicastStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ip source guard binding entry." INDEX { ipUnicastStaticRouteVrfId, ipUnicastStaticRouteDestIpAddressType, ipUnicastStaticRouteDestIpAddress, ipUnicastStaticRouteDestMask, ipUnicastStaticRouteGWIpAddressType, ipUnicastStaticRouteGWIpAddress } ::= { ipUnicastStaticRouteTable 1 } IpUnicastStaticRouteEntry ::= SEQUENCE { ipUnicastStaticRouteVrfId Integer32, ipUnicastStaticRouteDestIpAddressType InetAddressType, ipUnicastStaticRouteDestIpAddress InetAddress, ipUnicastStaticRouteDestMask Integer32, ipUnicastStaticRouteGWIpAddressType InetAddressType, ipUnicastStaticRouteGWIpAddress InetAddress, ipUnicastStaticRouteDistance Integer32, ipUnicastStaticRouteRowStatus RowStatus } ipUnicastStaticRouteVrfId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vrf id the default value is 0." -- DEFVAL { ipv4 } ::= { ipUnicastStaticRouteEntry 1 } ipUnicastStaticRouteDestIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP addresses type (IPv4 or IPv6)." -- DEFVAL { ipv4 } ::= { ipUnicastStaticRouteEntry 2 } ipUnicastStaticRouteDestIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP destination prefix." ::= { ipUnicastStaticRouteEntry 3 } ipUnicastStaticRouteDestMask OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DIP destination prefix mask." ::= { ipUnicastStaticRouteEntry 4 } ipUnicastStaticRouteGWIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP addresses type (IPv4 or IPv6)." -- DEFVAL { ipv4 } ::= { ipUnicastStaticRouteEntry 5 } ipUnicastStaticRouteGWIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP gateway address." ::= { ipUnicastStaticRouteEntry 6 } ipUnicastStaticRouteDistance OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance value for this route." ::= { ipUnicastStaticRouteEntry 7 } ipUnicastStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ipUnicastStaticRouteEntry 8 } -- -- clear all the static route -- ipUnicastClrStaticRoute OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "clear all the static route." ::= { ipUnicast 2 } -- -- clear the static route on vrf -- ipUnicastClrVrfStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpUnicastClrVrfStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { ipUnicast 3 } ipUnicastClrVrfStaticRouteEntry OBJECT-TYPE SYNTAX IpUnicastClrVrfStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ipUnicastClrVrfStaticRouteIndex } ::= { ipUnicastClrVrfStaticRouteTable 1 } IpUnicastClrVrfStaticRouteEntry ::= SEQUENCE { ipUnicastClrVrfStaticRouteIndex Integer32, ipUnicastClrVrfStaticRoute Integer32 } ipUnicastClrVrfStaticRouteIndex OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { ipUnicastClrVrfStaticRouteEntry 1 } ipUnicastClrVrfStaticRoute OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { ipUnicastClrVrfStaticRouteEntry 2 } ipUnicastMaxStaticRoute OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed number of static routes." ::= { ipUnicast 4 } ipUnicastMaxStaticV6Route OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed number of IPv6 static routes." ::= { ipUnicast 5 } ipUnicastIcmpErrorInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Error message interval(ms) of ICMP." ::= { ipUnicast 6 } ipUnicastIcmpv6ErrorInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Error message interval(ms) of ICMP." ::= { ipUnicast 7 } -- Sub Module: AAA -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== authenticationEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable authentication function. enable:1 disable:2." ::= { aaa 1 } authenticationLoginTable OBJECT-TYPE SYNTAX SEQUENCE OF AuthenticationLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of login entry." ::= { aaa 2 } authenticationLoginEntry OBJECT-TYPE SYNTAX AuthenticationLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login entry " INDEX { authenticationLoginIndex} ::= { authenticationLoginTable 1 } AuthenticationLoginEntry ::= SEQUENCE { authenticationLoginIndex Integer32, authenticationLoginName OCTET STRING, authenticationLoginOne INTEGER, authenticationLoginTwo INTEGER, authenticationLoginThree INTEGER, authenticationLoginFour INTEGER, authenticationLoginFive INTEGER, authenticationLoginSix INTEGER, authenticationLoginRowStatus RowStatus } authenticationLoginIndex OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login index." ::= { authenticationLoginEntry 1 } authenticationLoginName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Login name. The default method list name is 'default'." ::= { authenticationLoginEntry 2 } authenticationLoginOne OBJECT-TYPE SYNTAX INTEGER { enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The first login type, enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 3 } authenticationLoginTwo OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The second login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 4 } authenticationLoginThree OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The third login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 5 } authenticationLoginFour OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The fourth login type,disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 6 } authenticationLoginFive OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The fifth login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 7 } authenticationLoginSix OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), line(2), none(3), radius(4), local(5), tacacs-plus(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The fifth login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)." ::= { authenticationLoginEntry 8 } authenticationLoginRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { authenticationLoginEntry 9 } authenticationLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AuthenticationLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of login entry." ::= { aaa 3 } authenticationLineEntry OBJECT-TYPE SYNTAX AuthenticationLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login entry." INDEX { authenticationLineIndex} ::= { authenticationLineTable 1 } AuthenticationLineEntry ::= SEQUENCE { authenticationLineIndex Integer32, authenticationLineLoginName OCTET STRING } authenticationLineIndex OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Login index." ::= { authenticationLineEntry 1 } authenticationLineLoginName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set an authentication list for login name. The default login name is 'default'. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)" ::= { authenticationLineEntry 2 } -- Sub Module: EVC evcTable OBJECT-TYPE SYNTAX SEQUENCE OF EvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of EVC entry. An Ethernet virtual connection (EVC) is a logical relationship between Ethernet user-to-network interfaces (UNI) in a provider-based Ethernet service." ::= { evc 1 } evcEntry OBJECT-TYPE SYNTAX EvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of EVC." INDEX { evcIndex} ::= { evcTable 1 } EvcEntry ::= SEQUENCE { evcIndex Integer32, evcName OCTET STRING, evcRowstatus RowStatus } evcIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of EVC table." ::= { evcEntry 1 } evcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of EVC entry." ::= { evcEntry 2 } evcRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { evcEntry 3 } evcInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF EvcInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of EVC information." ::= { evc 2 } evcInfoEntry OBJECT-TYPE SYNTAX EvcInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One entry of EVC information." INDEX { evcInfoIndex} ::= { evcInfoTable 1 } EvcInfoEntry ::= SEQUENCE { evcInfoIndex Integer32, evcInfoMappedVlan Integer32, evcInfoMappedDoubleVlan OCTET STRING, evcInfoUsingNumber Integer32 } evcInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of EVC information table." ::= { evcInfoEntry 1 } evcInfoMappedVlan OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id of EVC mapped-vlan. The unset value is 0." ::= { evcInfoEntry 2 } evcInfoMappedDoubleVlan OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..9)) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id of EVC mapped-double-vlan. The input value is like 2,3. The first vlan id is EVC mapped-inner-vlan ID. The second vlan id is EVC mapped-outer-vlan ID. The unset value is NULL." ::= { evcInfoEntry 3 } evcInfoUsingNumber OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of raw-vlan using this EVC." ::= { evcInfoEntry 4 } -- Sub Module: QINQ qinqVlanMappingTableObject OBJECT IDENTIFIER ::= { qinq 1 } -- -- add/remove a vlan mapping table -- qinqVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information of vlan mapping table." ::= { qinqVlanMappingTableObject 1 } qinqVlanMappingEntry OBJECT-TYPE SYNTAX QinqVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information of vlan mapping table." INDEX { qinqVlanMappingTableIndex} ::= { qinqVlanMappingTable 1 } QinqVlanMappingEntry ::= SEQUENCE { qinqVlanMappingTableIndex Integer32, qinqVlanMappingTableName OCTET STRING, qinqVlanMappingTableRowstatus RowStatus } qinqVlanMappingTableIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "vlan mapping table index." ::= { qinqVlanMappingEntry 1 } qinqVlanMappingTableName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "vlan mapping table name." ::= { qinqVlanMappingEntry 2 } qinqVlanMappingTableRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqVlanMappingEntry 3 } -- -- Nodes of QinqVlanMappingTableRawVlanObject -- qinqVlanMappingItemTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqVlanMappingItemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to describe the relation between raw-vlan and mapped-vlan." ::= { qinqVlanMappingTableObject 2 } qinqVlanMappingItemEntry OBJECT-TYPE SYNTAX QinqVlanMappingItemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to describe one item of the relation between raw-vlan and mapped-vlan." INDEX { qinqMappingEntryMappingTableIndex, qinqMappingEntryEvcIndex, qinqMappingEntryRawVid} ::= { qinqVlanMappingItemTable 1 } QinqVlanMappingItemEntry ::= SEQUENCE { qinqMappingEntryMappingTableIndex Integer32, qinqMappingEntryEvcIndex Integer32, qinqMappingEntryRawVid Integer32, qinqMappingEntryRowstatus RowStatus } qinqMappingEntryMappingTableIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan mapping table index." ::= { qinqVlanMappingItemEntry 1 } qinqMappingEntryEvcIndex OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The EVC table index." ::= { qinqVlanMappingItemEntry 2 } qinqMappingEntryRawVid OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Raw vlan tag for this entry. Set to 0 to use for untagged mapped vlan tag. Set to 4095 for out-of-range raw vlan." ::= { qinqVlanMappingItemEntry 3 } qinqMappingEntryRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqVlanMappingItemEntry 4 } -- below is for double tag qinq -- -- add/remove an untagged vlan mapping entry with evc to vlan mapping table -- -- qinqVlanUntaggedMappingWithEvcTable OBJECT-TYPE -- SYNTAX SEQUENCE OF QinqVlanUntaggedMappingWithEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "The table containing information of vlan mapping table." -- ::= { qinqVlanMappingTableRawVlanObject 1 } -- -- qinqVlanUntaggedMappingWithEvcEntry OBJECT-TYPE -- SYNTAX QinqVlanUntaggedMappingWithEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "An entry containing information of vlan mapping table." -- INDEX { qinqUntaggedWithEvcMappingTableIndex } -- ::= { qinqVlanUntaggedMappingWithEvcTable 1 } -- -- QinqVlanUntaggedMappingWithEvcEntry ::= -- SEQUENCE { -- qinqUntaggedWithEvcMappingTableIndex Integer32, -- qinqUntaggedWithEvcName OCTET STRING, -- qinqUntaggedWithEvcFirstVlantag Integer32, -- qinqUntaggedWithEvcSecondVlantag Integer32, -- qinqUntaggedWithEvcRowstatus RowStatus -- } -- -- qinqUntaggedWithEvcMappingTableIndex OBJECT-TYPE -- SYNTAX Integer32 (1..64) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "vlan mapping table index." -- ::= { qinqVlanUntaggedMappingWithEvcEntry 1 } -- -- qinqUntaggedWithEvcName OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (0..16)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "evc name related to this entry." -- ::= { qinqVlanUntaggedMappingWithEvcEntry 2 } -- -- qinqUntaggedWithEvcFirstVlantag OBJECT-TYPE -- SYNTAX Integer32 (1..4094) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "first vlan tag for this entry if it need map double vlan. -- default is 0xFFFF to not use double vlan." -- ::= { qinqVlanUntaggedMappingWithEvcEntry 3 } -- -- qinqUntaggedWithEvcSecondVlantag OBJECT-TYPE -- SYNTAX Integer32 (1..4094) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "mapped vlan tag." -- ::= { qinqVlanUntaggedMappingWithEvcEntry 4 } -- -- qinqUntaggedWithEvcRowstatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. -- 1 means Active -- 4 means CreateAndGo -- 6 means Destroy" -- ::= { qinqVlanUntaggedMappingWithEvcEntry 5 } -- -- add/remove an tagged vlan mapping entry with evc to vlan mapping table -- -- qinqVlanTaggedMappingWithEvcTable OBJECT-TYPE -- SYNTAX SEQUENCE OF QinqVlanTaggedMappingWithEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "The infomation of vlan mapping table entry." -- ::= { qinqVlanMappingTableRawVlanObject 2 } -- -- qinqVlanTaggedMappingWithEvcEntry OBJECT-TYPE -- SYNTAX QinqVlanTaggedMappingWithEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "An entry containing information of vlan mapping table." -- INDEX { qinqTaggedWithEvcMappingTableIndex, qinqTaggedWithEvcMappingRawVlantag } -- ::= { qinqVlanTaggedMappingWithEvcTable 1 } -- -- QinqVlanTaggedMappingWithEvcEntry ::= -- SEQUENCE { -- qinqTaggedWithEvcMappingTableIndex Integer32, -- qinqTaggedWithEvcMappingRawVlantag Integer32, -- qinqTaggedWithEvcName OCTET STRING, -- qinqTaggedWithEvcMappingVlantag Integer32, -- qinqTaggedWithEvcRowstatus RowStatus -- } -- -- qinqTaggedWithEvcMappingTableIndex OBJECT-TYPE -- SYNTAX Integer32 (1..64) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "vlan mapping table index." -- ::= { qinqVlanTaggedMappingWithEvcEntry 1 } -- -- qinqTaggedWithEvcMappingRawVlantag OBJECT-TYPE -- SYNTAX Integer32 (1..4095) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "raw vlan tag for this entry. -- set to 4095 to use for out of range mapped vlan tag." -- ::= { qinqVlanTaggedMappingWithEvcEntry 2 } -- -- qinqTaggedWithEvcName OBJECT-TYPE -- SYNTAX OCTET STRING (SIZE (0..16)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "evc name related to this entry." -- ::= { qinqVlanTaggedMappingWithEvcEntry 3 } -- -- qinqTaggedWithEvcMappingVlantag OBJECT-TYPE -- SYNTAX Integer32 (1..4094) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "mapping vlan tag for this entry." -- ::= { qinqVlanTaggedMappingWithEvcEntry 4 } -- -- qinqTaggedWithEvcRowstatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. -- 1 means Active -- 4 means CreateAndGo -- 6 means Destroy" -- ::= { qinqVlanTaggedMappingWithEvcEntry 5 } -- -- add/remove an untagged or tagged vlan mapping entry without evc to vlan mapping table -- -- qinqVlanMappingWithoutEvcTable OBJECT-TYPE -- SYNTAX SEQUENCE OF QinqVlanMappingWithoutEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "The infomation of vlan mapping table entry." -- ::= { qinqVlanMappingTableRawVlanObject 3 } -- -- qinqVlanMappingWithoutEvcEntry OBJECT-TYPE -- SYNTAX QinqVlanMappingWithoutEvcEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "The infomation of vlan mapping table entry." -- INDEX { qinqWithoutEvcMappingTableIndex } -- ::= { qinqVlanMappingWithoutEvcTable 1 } -- -- QinqVlanMappingWithoutEvcEntry ::= -- SEQUENCE { -- qinqWithoutEvcMappingTableIndex Integer32, -- qinqWithoutEvcMappingRawVlantag Integer32, -- qinqWithoutEvcMappingVlantag Integer32, -- qinqWithoutEvcRowstatus RowStatus -- } -- -- qinqWithoutEvcMappingTableIndex OBJECT-TYPE -- SYNTAX Integer32 (1..64) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "vlan mapping table index." -- ::= { qinqVlanMappingWithoutEvcEntry 1 } -- -- qinqWithoutEvcMappingRawVlantag OBJECT-TYPE -- SYNTAX Integer32 (0..4094) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "raw vlan tag for this entry. -- set to 0 to use for untagged mapped vlan tag." -- ::= { qinqVlanMappingWithoutEvcEntry 2 } -- -- qinqWithoutEvcMappingVlantag OBJECT-TYPE -- SYNTAX Integer32 (1..4094) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "mapping vlan tag for this entry." -- ::= { qinqVlanMappingWithoutEvcEntry 3 } -- -- qinqWithoutEvcRowstatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. -- 1 means Active -- 4 means CreateAndGo -- 6 means Destroy" -- ::= { qinqVlanMappingWithoutEvcEntry 4 } -- -- Qinq Interface Object -- qinqIfObject OBJECT IDENTIFIER ::= { qinq 2 } -- -- set/unset an interface switch mode to dot1q tunnel -- qinqIfModeDot1qTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfModeDot1qTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport mode." ::= { qinqIfObject 1 } qinqIfModeDot1qTunnelEntry OBJECT-TYPE SYNTAX QinqIfModeDot1qTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport mode." INDEX { qinqIfModeDot1qTunnelIfIndex } ::= { qinqIfModeDot1qTunnelTable 1 } QinqIfModeDot1qTunnelEntry ::= SEQUENCE { qinqIfModeDot1qTunnelIfIndex Integer32, qinqIfModeDot1qTunnelRowstatus RowStatus } qinqIfModeDot1qTunnelIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to set to dot1q-tunnel mode." ::= { qinqIfModeDot1qTunnelEntry 1 } qinqIfModeDot1qTunnelRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqIfModeDot1qTunnelEntry 2 } -- -- set an interface switch dot1q tunnel type -- qinqIfDot1qTunnelTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfDot1qTunnelTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel type." ::= { qinqIfObject 2 } qinqIfDot1qTunnelTypeEntry OBJECT-TYPE SYNTAX QinqIfDot1qTunnelTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel type." INDEX { qinqIfDot1qTunnelTypeIfIndex } ::= { qinqIfDot1qTunnelTypeTable 1 } QinqIfDot1qTunnelTypeEntry ::= SEQUENCE { qinqIfDot1qTunnelTypeIfIndex Integer32, qinqIfDot1qTunnelType INTEGER } qinqIfDot1qTunnelTypeIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to set dot1q-tunnel type." ::= { qinqIfDot1qTunnelTypeEntry 1 } qinqIfDot1qTunnelType OBJECT-TYPE SYNTAX INTEGER { selective(1), basic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The do1q-tunnel type want to set. 1 selective. 2 basic." ::= { qinqIfDot1qTunnelTypeEntry 2 } -- -- set an interface switch dot1q tunnel native vlan -- qinqIfDot1qTunnelNativeVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfDot1qTunnelNativeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel native vlan." ::= { qinqIfObject 3 } qinqIfDot1qTunnelNativeVlanEntry OBJECT-TYPE SYNTAX QinqIfDot1qTunnelNativeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel native vlan." INDEX { qinqIfDot1qTunnelNativeVlanIfIndex } ::= { qinqIfDot1qTunnelNativeVlanTable 1 } QinqIfDot1qTunnelNativeVlanEntry ::= SEQUENCE { qinqIfDot1qTunnelNativeVlanIfIndex Integer32, qinqIfDot1qTunnelNativeVlanId Integer32, qinqIfDot1qTunnelNativeIsInnerVlan INTEGER, qinqIfDot1qTunnelNativeRowStatus RowStatus } qinqIfDot1qTunnelNativeVlanIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to set dot1q-tunnel native vlan." ::= { qinqIfDot1qTunnelNativeVlanEntry 1 } qinqIfDot1qTunnelNativeVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The do1q-tunnel native vlan id to set. 1 means set to default native vlan" ::= { qinqIfDot1qTunnelNativeVlanEntry 2 } qinqIfDot1qTunnelNativeIsInnerVlan OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether the do1q-tunnel native vlan is inner vlan. 1:the vlan id is inner vlan id. 2:default, the vlan id is not inner vlan id. " ::= { qinqIfDot1qTunnelNativeVlanEntry 3 } qinqIfDot1qTunnelNativeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqIfDot1qTunnelNativeVlanEntry 10 } -- -- set an interface switch dot1q tunnel allow vlan -- qinqIfDot1qTunnelAllowVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfDot1qTunnelAllowVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel allow vlan." ::= { qinqIfObject 4 } qinqIfDot1qTunnelAllowVlanEntry OBJECT-TYPE SYNTAX QinqIfDot1qTunnelAllowVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel allow vlan." INDEX { qinqIfDot1qTunnelAllowVlanIfIndex } ::= { qinqIfDot1qTunnelAllowVlanTable 1 } QinqIfDot1qTunnelAllowVlanEntry ::= SEQUENCE { qinqIfDot1qTunnelAllowVlanIfIndex Integer32, qinqIfDot1qTunnelAllowVlanIdList OCTET STRING, qinqIfDot1qTunnelAllowType INTEGER, qinqIfDot1qTunnelAllowVlanId Integer32, qinqIfDot1qTunnelAllowRowstatus RowStatus } qinqIfDot1qTunnelAllowVlanIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to set dot1q-tunnel allow vlan." ::= { qinqIfDot1qTunnelAllowVlanEntry 1 } qinqIfDot1qTunnelAllowVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The allowed vlan list belong to this dot1q tunnel port." ::= { qinqIfDot1qTunnelAllowVlanEntry 2 } qinqIfDot1qTunnelAllowType OBJECT-TYPE SYNTAX INTEGER { allowAll(1), allowNone(2), allowAdd(3), allowRemove(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The do1q-tunnel type want to set. 1 allowAll. 2 allowNone. 3 allowAdd. 4 allowRemove. This node is only use for set. The get value is always 0." ::= { qinqIfDot1qTunnelAllowVlanEntry 3 } qinqIfDot1qTunnelAllowVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The do1q-tunnel allow vlan id to set.vlan id range 1~4094. This node is only use for set. The get value is always 0. Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface." ::= { qinqIfDot1qTunnelAllowVlanEntry 4 } qinqIfDot1qTunnelAllowRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. For this table, only realize CreateAndGo and Active. If want to remove allowed vlan, use do1q-tunnel type 4(allowRemove). 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqIfDot1qTunnelAllowVlanEntry 5 } -- -- apply vlan mapping table on selective dot1q tunnel port -- qinqIfDot1qTunnelApplyVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfDot1qTunnelApplyVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel applied vlan mapping table." ::= { qinqIfObject 5 } qinqIfDot1qTunnelApplyVlanMappingEntry OBJECT-TYPE SYNTAX QinqIfDot1qTunnelApplyVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport dot1q tunnel applied vlan mapping table." INDEX { qinqIfDot1qTunnelApplyIfIndex } ::= { qinqIfDot1qTunnelApplyVlanMappingTable 1 } QinqIfDot1qTunnelApplyVlanMappingEntry ::= SEQUENCE { qinqIfDot1qTunnelApplyIfIndex Integer32, qinqIfDot1qTunnelApplyVlanMappingTableName OCTET STRING, qinqIfDot1qTunnelApplyRowstatus RowStatus } qinqIfDot1qTunnelApplyIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to apply vlan mapping table." ::= { qinqIfDot1qTunnelApplyVlanMappingEntry 1 } qinqIfDot1qTunnelApplyVlanMappingTableName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan mapping table name want to apply to this interface." ::= { qinqIfDot1qTunnelApplyVlanMappingEntry 2 } qinqIfDot1qTunnelApplyRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqIfDot1qTunnelApplyVlanMappingEntry 3 } -- -- enable vlan translation on trunk port -- qinqIfVlanTranslationEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfVlanTranslationEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enable/disable vlan translation of trunk port ." ::= { qinqIfObject 6 } qinqIfVlanTranslationEnableEntry OBJECT-TYPE SYNTAX QinqIfVlanTranslationEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enable/disable vlan translation of trunk port" INDEX { qinqIfVlanTransIfIndex } ::= { qinqIfVlanTranslationEnableTable 1 } QinqIfVlanTranslationEnableEntry ::= SEQUENCE { qinqIfVlanTransIfIndex Integer32, qinqIfVlanTransEnable INTEGER } qinqIfVlanTransIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to enable or disable vlan translation." ::= { qinqIfVlanTranslationEnableEntry 1 } qinqIfVlanTransEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable vlan translation of trunk port." ::= { qinqIfVlanTranslationEnableEntry 2 } -- -- apply vlan mapping table on vlan translation port -- qinqIfVlanTransApplyVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfVlanTransApplyVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport trunk vlan translation applied vlan mapping table." ::= { qinqIfObject 7 } qinqIfVlanTransApplyVlanMappingEntry OBJECT-TYPE SYNTAX QinqIfVlanTransApplyVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface switchport trunk vlan translation applied vlan mapping table." INDEX { qinqIfVlanTransApplyIfIndex } ::= { qinqIfVlanTransApplyVlanMappingTable 1 } QinqIfVlanTransApplyVlanMappingEntry ::= SEQUENCE { qinqIfVlanTransApplyIfIndex Integer32, qinqIfVlanTransApplyVlanMappingTableName OCTET STRING, qinqIfVlanTransApplyRowstatus RowStatus } qinqIfVlanTransApplyIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to apply vlan mapping table." ::= { qinqIfVlanTransApplyVlanMappingEntry 1 } qinqIfVlanTransApplyVlanMappingTableName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan mapping table name want to apply to this interface." ::= { qinqIfVlanTransApplyVlanMappingEntry 2 } qinqIfVlanTransApplyRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { qinqIfVlanTransApplyVlanMappingEntry 3 } -- -- set dot1q ethertype -- qinqIfDot1qEthertypeTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqIfDot1qEthertypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface dot1q type." ::= { qinqIfObject 8 } qinqIfDot1qEthertypeEntry OBJECT-TYPE SYNTAX QinqIfDot1qEthertypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of interface dot1q type." INDEX { qinqIfDot1qEthertypeIfIndex } ::= { qinqIfDot1qEthertypeTable 1 } QinqIfDot1qEthertypeEntry ::= SEQUENCE { qinqIfDot1qEthertypeIfIndex Integer32, qinqIfDot1qEthertype OCTET STRING } qinqIfDot1qEthertypeIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which want to set ether type." ::= { qinqIfDot1qEthertypeEntry 1 } qinqIfDot1qEthertype OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ethertype want to set to this interface. the ethertype value, could be 0x0000 ~~ 0xFFFF" ::= { qinqIfDot1qEthertypeEntry 2 } -- -- Qinq Vlan Dot1q Object -- qinqVlanDot1qObject OBJECT IDENTIFIER ::= { qinq 3 } -- -- Qinq Vlan Dot1q tag native Enable -- qinqVlanDot1qTagNativeEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF QinqVlanDot1qTagNativeEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of tag native enable or not." ::= { qinqVlanDot1qObject 1 } qinqVlanDot1qTagNativeEnableEntry OBJECT-TYPE SYNTAX QinqVlanDot1qTagNativeEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of tag native enable or not." INDEX { interfaceIndex } ::= { qinqVlanDot1qTagNativeEnableTable 1 } QinqVlanDot1qTagNativeEnableEntry ::= SEQUENCE { qinqVlanDot1qTagNativeEnable INTEGER } qinqVlanDot1qTagNativeEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Tag Native. enable(1), disable(2)." ::= { qinqVlanDot1qTagNativeEnableEntry 2 } -- Sub Module: RMONEXTENSION -- Sub Module: RMONEXTENSION rmonExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RmonExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "rmon extension table." ::= { rmonExt 1 } rmonExtEntry OBJECT-TYPE SYNTAX RmonExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rmon extension table entry." INDEX { rmonExtIfIndex } ::= { rmonExtTable 1 } RmonExtEntry ::= SEQUENCE { rmonExtIfIndex Integer32, rmonExtClrCounter INTEGER } rmonExtIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { rmonExtEntry 1 } rmonExtClrCounter OBJECT-TYPE SYNTAX INTEGER { resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset rmon counters on interface; 1: resetCount and return value is always 0." ::= { rmonExtEntry 2 } -- Sub Module: LDPEXT ldpExtRouterLdp OBJECT-TYPE SYNTAX INTEGER { destroy(1), create(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "destroy or create ldp instance. destroy:1 create:2." ::= { ldpExt 1 } ldpExtGlobalConfig OBJECT IDENTIFIER ::= { ldpExt 2 } ldpExtGlobalConfigCtlMode OBJECT-TYPE SYNTAX INTEGER { independent(1), ordered(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "set the control mode for label processing. 1 independent. 2 ordered." ::= { ldpExtGlobalConfig 1 } ldpExtGlobalConfigExplicitNull OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "configure the router to send explicit-null labels for directly connected FECs instead of implicit-null labels. disable:1 enable:2." ::= { ldpExtGlobalConfig 2 } ldpExtGlobalConfigHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the interval after which hello packets are sent out.Range 1~21845." ::= { ldpExtGlobalConfig 3 } ldpExtGlobalConfigHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the global value for the hold-time after which the LSR rejects adjacencies." ::= { ldpExtGlobalConfig 4 } ldpExtGlobalConfigKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the global value for the interval after which keep-alive packets are sent out." ::= { ldpExtGlobalConfig 5 } ldpExtGlobalConfigKeepAliveTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the global value for the time-out after which sessions are rejected." ::= { ldpExtGlobalConfig 6 } ldpExtGlobalConfigMulticastHellos OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "disable/enable the transmission of LDP Hello messages. disable:1 enable:2." ::= { ldpExtGlobalConfig 7 } ldpExtGlobalConfigRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "set the router-id to the supplied IP address." ::= { ldpExtGlobalConfig 8 } ldpExtGlobalConfigTargetedPeerHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the interval for sending unicast hello packets to targeted peers." ::= { ldpExtGlobalConfig 9 } ldpExtGlobalConfigTargetedPeerHelloReceipt OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "toggle the receipt of targeted hello packets.disable:1 enable:2." ::= { ldpExtGlobalConfig 10 } ldpExtGlobalConfigTargetedPeerHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the time-out value that is the time that the router waits before rejecting an adjacency with targeted peers." ::= { ldpExtGlobalConfig 11 } ldpExtGlobalConfigClrLdpAdjacencyAll OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "clear all adjacencies for the current LSR." ::= { ldpExtGlobalConfig 12 } ldpExtGlobalConfigClrLdpSessionAll OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "clear all sessions for the current LSR." ::= { ldpExtGlobalConfig 13 } ldpExtGlobalConfigClrLdpStatic OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "clear LDP packet statistics." ::= { ldpExtGlobalConfig 14 } ldpExtGlobalConfigClrLdpStaticAdvLbls OBJECT-TYPE SYNTAX INTEGER { noUse(0), resetCount(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "clear LDP advertise-labels statistics." ::= { ldpExtGlobalConfig 15 } -- =============================== -- ldpExtIfConfigTable -- =============================== ldpExtIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LdpExtIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp extention interface config table." ::= { ldpExt 3 } ldpExtIfConfigEntry OBJECT-TYPE SYNTAX LdpExtIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp extension interface config table entry." INDEX {ldpExtIfConfigIfIndex } ::= { ldpExtIfConfigTable 1 } LdpExtIfConfigEntry ::= SEQUENCE { ldpExtIfConfigIfIndex Integer32, ldpExtIfConfigHelloInterval Integer32, ldpExtIfConfigHoldTime Integer32, ldpExtIfConfigKeepAliveInterval Integer32, ldpExtIfConfigKeepAliveTimeout Integer32, ldpExtIfConfigMulticastHellos INTEGER, ldpExtIfConfigTargetedPeerHelloInterval Integer32, ldpExtIfConfigTargetedPeerHoldTime Integer32, ldpExtIfConfigEnableLdp INTEGER } ldpExtIfConfigIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { ldpExtIfConfigEntry 1 } ldpExtIfConfigHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the interval for sending multicast Hello packets via an interface." ::= { ldpExtIfConfigEntry 2 } ldpExtIfConfigHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the hold-time value after which the LSR rejects adjacencies via an interface." ::= { ldpExtIfConfigEntry 3 } ldpExtIfConfigKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the interval for sending keep-alive messages to the peer in order to maintain a session." ::= { ldpExtIfConfigEntry 4 } ldpExtIfConfigKeepAliveTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the keep-alive time-out value for rejecting a session with a peer." ::= { ldpExtIfConfigEntry 5 } ldpExtIfConfigMulticastHellos OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "disable/enable multicast hello exchange on a specified interface. disable:1 enable:2." DEFVAL{ 2 } ::= { ldpExtIfConfigEntry 6 } ldpExtIfConfigTargetedPeerHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the interval for sending unicast hello packets to targeted peers via this interface." ::= { ldpExtIfConfigEntry 7 } ldpExtIfConfigTargetedPeerHoldTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "set the time-out value that is the time that the router waits before rejecting an adjacency with a targeted peer." ::= { ldpExtIfConfigEntry 8 } ldpExtIfConfigEnableLdp OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "disable/enable ldp function on a specified interface. disable:1 enable:2." ::= { ldpExtIfConfigEntry 9 } -- =========================== -- ldpExtConfigTargetPeerTable -- =========================== ldpExtConfigTargetPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF LdpExtConfigTargetPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "config target peer table." ::= { ldpExt 4 } ldpExtConfigTargetPeerEntry OBJECT-TYPE SYNTAX LdpExtConfigTargetPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp extension target peer table entry." INDEX { ldpExtConfigTargetPeerAddr } ::= { ldpExtConfigTargetPeerTable 1 } LdpExtConfigTargetPeerEntry ::= SEQUENCE { ldpExtConfigTargetPeerAddr IpAddress, ldpExtConfigTargetPeerStatus RowStatus } ldpExtConfigTargetPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "specify a targeted LDP peer." ::= { ldpExtConfigTargetPeerEntry 1 } ldpExtConfigTargetPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ldpExtConfigTargetPeerEntry 2 } -- =================================================== -- transport address table -- =================================================== ldpExtConfigTransAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF LdpExtConfigTransAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "config transport address table." ::= { ldpExt 5 } ldpExtConfigTransAddrEntry OBJECT-TYPE SYNTAX LdpExtConfigTransAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp extension transport address table entry." INDEX { ldpExtGlobalConfigTransportAddress } ::= { ldpExtConfigTransAddrTable 1 } LdpExtConfigTransAddrEntry ::= SEQUENCE { ldpExtGlobalConfigTransportAddress IpAddress, ldpExtGlobalConfigTransportAddressStatus RowStatus } ldpExtGlobalConfigTransportAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "configure the transport address for a label space." ::= { ldpExtConfigTransAddrEntry 1 } ldpExtGlobalConfigTransportAddressStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ldpExtConfigTransAddrEntry 2 } -- ================================================== -- Advertise-Labels Table -- ================================================== ldpExtConfigAdvLblsTable OBJECT-TYPE SYNTAX SEQUENCE OF LdpExtConfigAdvLblsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "config advertise label table." ::= { ldpExt 6 } ldpExtConfigAdvLblsEntry OBJECT-TYPE SYNTAX LdpExtConfigAdvLblsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp advertise label table entry." INDEX { ldpExtAdvLblsPrefixIndex, ldpExtAdvLblsPeerIndex } ::= { ldpExtConfigAdvLblsTable 1 } LdpExtConfigAdvLblsEntry ::= SEQUENCE { ldpExtAdvLblsPrefixIndex Integer32, ldpExtAdvLblsPeerIndex Integer32, ldpExtAdvLblsPrefixName OCTET STRING, ldpExtAdvLblsPeerName OCTET STRING, ldpExtAdvLblsStatus RowStatus } ldpExtAdvLblsPrefixIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertise-Labels Table prefix index." ::= { ldpExtConfigAdvLblsEntry 1 } ldpExtAdvLblsPeerIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertise-Labels Table peer index." ::= { ldpExtConfigAdvLblsEntry 2 } ldpExtAdvLblsPrefixName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "specify Advertise-Labels Table prefix name." ::= { ldpExtConfigAdvLblsEntry 3 } ldpExtAdvLblsPeerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "specify Advertise-Labels Table peer name." ::= { ldpExtConfigAdvLblsEntry 4 } ldpExtAdvLblsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ldpExtConfigAdvLblsEntry 5 } -- ================================================== -- Advertise-label to any table -- ================================================== ldpExtConfigAdvLblsToAnyTable OBJECT-TYPE SYNTAX SEQUENCE OF LdpExtConfigAdvLblsToAnyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "config advertise label to any table." ::= { ldpExt 7 } ldpExtConfigAdvLblsToAnyEntry OBJECT-TYPE SYNTAX LdpExtConfigAdvLblsToAnyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ldp advertise label to any table entry." INDEX { ldpExtAdvLblsPrefixIndex } ::= { ldpExtConfigAdvLblsToAnyTable 1 } LdpExtConfigAdvLblsToAnyEntry ::= SEQUENCE { ldpExtAdvLblsToAnyPrefixIndex Integer32, ldpExtAdvLblsToAnyPrefixName OCTET STRING, ldpExtAdvLblsToAnyStatus RowStatus } ldpExtAdvLblsToAnyPrefixIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertise-Labels to any Table prefix index." ::= { ldpExtConfigAdvLblsToAnyEntry 1 } ldpExtAdvLblsToAnyPrefixName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "specify which destinations have their labels advertised to all LDP neighbors." ::= { ldpExtConfigAdvLblsToAnyEntry 2 } ldpExtAdvLblsToAnyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ldpExtConfigAdvLblsToAnyEntry 3 } -- Sub Module: BGP4EXT -- -- bgpLocalAs -- bgpLocalAs OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The local autonomous system number." ::= { bgp 1 } -- -- bgpMibBindingVrf -- bgpMibBinding OBJECT IDENTIFIER ::= { bgp 2 } bgpMibBindingVrf OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "BGP mib binding vrf." ::= { bgpMibBinding 1 } bgpMibBindingVpnv4 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP mib binding vpnv4." ::= { bgpMibBinding 2 } -- --BGP Global config -- bgpGlobalConfig OBJECT IDENTIFIER ::= { bgp 3 } bgpAlwaysCompareMed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow comparing MED from different neighbors." ::= { bgpGlobalConfig 1 } bgpDeterministicMed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Pick the best-MED path among paths advertised from the neighboring AS." ::= { bgpGlobalConfig 2 } bgpFastExternalFailover OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Immediately reset session if a link to a directly connected external peer goes down." ::= { bgpGlobalConfig 3 } bgpEnforceFirstAS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enforce the first AS for EBGP routes." ::= { bgpGlobalConfig 4 } bgpBestpathCompareRouterid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Compare router-id for identical EBGP paths." ::= { bgpGlobalConfig 5 } bgpBestpathCompareConfedASpath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow comparing confederation AS path length." ::= { bgpGlobalConfig 6 } bgpBestpathASPathIgnore OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ignore as-path length in selecting a route." ::= { bgpGlobalConfig 7 } bgpBestpathMed OBJECT-TYPE SYNTAX INTEGER { confed(1), missing(2), confedAndMissing(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Change the default bestpath selection MED attribute." ::= { bgpGlobalConfig 8 } bgpDefaultIpv4Unicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Activate ipv4-unicast for a peer by default." ::= { bgpGlobalConfig 9 } bgpDefaultLocalPreference OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure default local preference value." ::= { bgpGlobalConfig 10 } bgpLogNeighborChanges OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Log neighbor up/down and reset reason." ::= { bgpGlobalConfig 11 } bgpConfederationIdentifier OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Set routing domain confederation AS." ::= { bgpGlobalConfig 12 } bgpDistanceExternalRoutes OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for routes external to the AS. Default: 20." ::= { bgpGlobalConfig 13 } bgpDistanceInternalRoutes OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for routes internal to the AS. Default: 200." ::= { bgpGlobalConfig 14 } bgpDistancelocalRoutes OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Distance for routes local to the AS. Default: 200." ::= { bgpGlobalConfig 15 } bgpClientToClientReflection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure client to client route reflection." ::= { bgpGlobalConfig 16 } bgpScanTime OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure background scan interval(sec) [Default:60; Disable:0]." ::= { bgpGlobalConfig 17 } bgpClusterIDDigit OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Route-Reflector Cluster-id as 32 bit quantity. set to 0 to unset this node." ::= { bgpGlobalConfig 18 } bgpClusterIDIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Route-Reflector Cluster-id in IP address format. set to 0 to unset this node." ::= { bgpGlobalConfig 19 } -- -- BGP4 Received Peers -- bgpPeerExtTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPeerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about routes to destination networks from all BGP4 peers. Since BGP4 can carry routes for multiple Network Layer protocols, this table has the Address Family Identifier(AFI) of the Network Layer protocol as the first index. Further for a given AFI, routes carried by BGP4 are distinguished based on Subsequent Address Family Identifiers(SAFI). Hence that is used as the second index. Conceptually there is a separate Loc-RIB maintained by the BGP speaker for each combination of AFI and SAFI supported by it." REFERENCE "RFC-1771: A Border Gateway Protocol 4 (BGP-4), RFC-2858: Multiprotocol Extensions for BGP-4, RFC-2547: BGP/MPLS VPNs." ::= { bgp 4 } bgpPeerExtEntry OBJECT-TYPE SYNTAX BgpPeerExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a path to a network received from a peer." INDEX { bgpPeerExtPeer } ::= { bgpPeerExtTable 1 } BgpPeerExtEntry ::= SEQUENCE { bgpPeerExtPeer InetAddress, bgpPeerExtRemoteAS INTEGER, bgpPeerExtRowStats RowStatus, bgpPeerExtActivate TruthValue, bgpPeerExtPassive TruthValue, bgpPeerExtDescription OCTET STRING, bgpPeerExtCapabilityRouteRefresh TruthValue, bgpPeerExtCapabilityDynamic TruthValue, bgpPeerExtDontCapabilityNegotiate TruthValue, bgpPeerExtCapabilityOrf INTEGER, bgpPeerExtNextHopSelf TruthValue, bgpPeerExtRemovePrivateAS TruthValue, bgpPeerExtSendCommunity INTEGER, bgpPeerExtSoftReconfig TruthValue, bgpPeerExtRouteReflectorClient TruthValue, bgpPeerExtRouteServerClient TruthValue, bgpPeerExtAttrUnchangedASPath TruthValue, bgpPeerExtAttrUnchangedNexthop TruthValue, bgpPeerExtAttrUnchangedMed TruthValue, bgpPeerExtUpdateSource Integer32, bgpPeerExtDefaultOriginate TruthValue, bgpPeerExtPort Integer32, bgpPeerExtWeight Integer32, bgpPeerExtCollideEstablished TruthValue, bgpPeerExtOverrideCapability TruthValue, bgpPeerExtStrictCapabilityMatch TruthValue, bgpPeerExtAllowasIn Integer32, bgpPeerExtAsOverride TruthValue, bgpPeerExtMemberOfPeerGroupIndex Integer32 } bgpPeerExtPeer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Network Layer address of the peer where the route information was learned. An implementation is only required to support an IPv4 peer." ::= { bgpPeerExtEntry 1 } bgpPeerExtRemoteAS OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify AS number of BGP peer." ::= { bgpPeerExtEntry 2 } bgpPeerExtRowStats OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { bgpPeerExtEntry 3 } bgpPeerExtActivate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Address Family for this Neighbor." ::= { bgpPeerExtEntry 4 } bgpPeerExtPassive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Don't send open messages to this peer." ::= { bgpPeerExtEntry 5 } bgpPeerExtDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 80 characters describing this peer." ::= { bgpPeerExtEntry 6 } bgpPeerExtCapabilityRouteRefresh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise route-refresh capability to this peer." ::= { bgpPeerExtEntry 7 } bgpPeerExtCapabilityDynamic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise dynamic capability to this peer." ::= { bgpPeerExtEntry 8 } bgpPeerExtDontCapabilityNegotiate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Do not perform capability negotiation." ::= { bgpPeerExtEntry 9 } bgpPeerExtCapabilityOrf OBJECT-TYPE SYNTAX INTEGER { send(1), receive(2), both(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise prefixlist ORF capability to this peer." ::= { bgpPeerExtEntry 10 } bgpPeerExtNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable the next hop calculation for this neighbor." ::= { bgpPeerExtEntry 11 } bgpPeerExtRemovePrivateAS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Remove private AS number from outbound updates." ::= { bgpPeerExtEntry 12 } bgpPeerExtSendCommunity OBJECT-TYPE SYNTAX INTEGER { standard(1), extended(2), both(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send Community attribute to this neighbor." ::= { bgpPeerExtEntry 13 } bgpPeerExtSoftReconfig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow inbound soft reconfiguration for this peer." ::= { bgpPeerExtEntry 14 } bgpPeerExtRouteReflectorClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a neighbor as Route Reflector client." ::= { bgpPeerExtEntry 15 } bgpPeerExtRouteServerClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a neighbor as Route Server client." ::= { bgpPeerExtEntry 16 } bgpPeerExtAttrUnchangedASPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP As-path attribute is propagated unchanged to this neighbor." ::= { bgpPeerExtEntry 17 } bgpPeerExtAttrUnchangedNexthop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Next-hop attribute is propagated unchanged to this neighbor." ::= { bgpPeerExtEntry 18 } bgpPeerExtAttrUnchangedMed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Med attribute is propagated unchanged to this neighbor." ::= { bgpPeerExtEntry 19 } bgpPeerExtUpdateSource OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface ifindex." ::= { bgpPeerExtEntry 20 } bgpPeerExtDefaultOriginate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Originate default route to this peer." ::= { bgpPeerExtEntry 21 } bgpPeerExtPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor's BGP TCP port number." ::= { bgpPeerExtEntry 22 } bgpPeerExtWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set default weight for routes from this peer. Default: 0." ::= { bgpPeerExtEntry 23 } bgpPeerExtCollideEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Include Neighbor in Established State for Collision Detection." ::= { bgpPeerExtEntry 24 } bgpPeerExtOverrideCapability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Override capability negotiation result." ::= { bgpPeerExtEntry 25 } bgpPeerExtStrictCapabilityMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Strict capability negotiation match." ::= { bgpPeerExtEntry 26 } bgpPeerExtAllowasIn OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Strict capability negotiation match." ::= { bgpPeerExtEntry 27 } bgpPeerExtAsOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "override AS path." ::= { bgpPeerExtEntry 28 } bgpPeerExtMemberOfPeerGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "override AS path." ::= { bgpPeerExtEntry 29 } -- -- BGP4 Peer group -- bgpPeerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure peer-group." ::= { bgp 5 } bgpPeerGroupEntry OBJECT-TYPE SYNTAX BgpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a path to a network received from a peer." INDEX { bgpPeerGroupIndex } ::= { bgpPeerGroupTable 1 } BgpPeerGroupEntry ::= SEQUENCE { bgpPeerGroupIndex Integer32, bgpPeerGroupName OCTET STRING, bgpPeerGroupRowStats RowStatus, bgpPeerGroupRemoteAS INTEGER, bgpPeerGroupActivate TruthValue, bgpPeerGroupPassive TruthValue, bgpPeerGroupDescription OCTET STRING, bgpPeerGroupCapabilityRouteRefresh TruthValue, bgpPeerGroupCapabilityDynamic TruthValue, bgpPeerGroupDontCapabilityNegotiate TruthValue, bgpPeerGroupCapabilityOrf INTEGER, bgpPeerGroupNextHopSelf TruthValue, bgpPeerGroupRemovePrivateAS TruthValue, bgpPeerGroupSendCommunity INTEGER, bgpPeerGroupSoftReconfig TruthValue, bgpPeerGroupRouteReflectorClient TruthValue, bgpPeerGroupRouteServerClient TruthValue, bgpPeerGroupAttrUnchangedASPath TruthValue, bgpPeerGroupAttrUnchangedNexthop TruthValue, bgpPeerGroupAttrUnchangedMed TruthValue, bgpPeerGroupUpdateSource Integer32, bgpPeerGroupDefaultOriginate TruthValue, bgpPeerGroupPort Integer32, bgpPeerGroupWeight Integer32, bgpPeerGroupCollideEstablished TruthValue, bgpPeerGroupOverrideCapability TruthValue, bgpPeerGroupStrictCapabilityMatch TruthValue, bgpPeerGroupAllowasIn Integer32, bgpPeerGroupAsOverride TruthValue } bgpPeerGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer group index." ::= { bgpPeerGroupEntry 1 } bgpPeerGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Peer group name." ::= { bgpPeerGroupEntry 2 } bgpPeerGroupRowStats OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { bgpPeerGroupEntry 3 } bgpPeerGroupRemoteAS OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify AS number of BGP peer." ::= { bgpPeerGroupEntry 4 } bgpPeerGroupActivate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Address Family for this Neighbor." ::= { bgpPeerGroupEntry 5 } bgpPeerGroupPassive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Don't send open messages to this peer." ::= { bgpPeerGroupEntry 6 } bgpPeerGroupDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 80 characters describing this peer." ::= { bgpPeerGroupEntry 7 } bgpPeerGroupCapabilityRouteRefresh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise route-refresh capability to this peer." ::= { bgpPeerGroupEntry 8 } bgpPeerGroupCapabilityDynamic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise dynamic capability to this peer." ::= { bgpPeerGroupEntry 9 } bgpPeerGroupDontCapabilityNegotiate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Do not perform capability negotiation." ::= { bgpPeerGroupEntry 10 } bgpPeerGroupCapabilityOrf OBJECT-TYPE SYNTAX INTEGER { send(1), receive(2), both(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise prefixlist ORF capability to this peer." ::= { bgpPeerGroupEntry 11 } bgpPeerGroupNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable the next hop calculation for this neighbor." ::= { bgpPeerGroupEntry 12 } bgpPeerGroupRemovePrivateAS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Remove private AS number from outbound updates." ::= { bgpPeerGroupEntry 13 } bgpPeerGroupSendCommunity OBJECT-TYPE SYNTAX INTEGER { standard(1), extended(2), both(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send Community attribute to this neighbor." ::= { bgpPeerGroupEntry 14 } bgpPeerGroupSoftReconfig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allow inbound soft reconfiguration for this peer." ::= { bgpPeerGroupEntry 15 } bgpPeerGroupRouteReflectorClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a neighbor as Route Reflector client." ::= { bgpPeerGroupEntry 16 } bgpPeerGroupRouteServerClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a neighbor as Route Server client." ::= { bgpPeerGroupEntry 17 } bgpPeerGroupAttrUnchangedASPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP As-path attribute is propagated unchanged to this neighbor." ::= { bgpPeerGroupEntry 18 } bgpPeerGroupAttrUnchangedNexthop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Next-hop attribute is propagated unchanged to this neighbor." ::= { bgpPeerGroupEntry 19 } bgpPeerGroupAttrUnchangedMed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Med attribute is propagated unchanged to this neighbor." ::= { bgpPeerGroupEntry 20 } bgpPeerGroupUpdateSource OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interface ifindex." ::= { bgpPeerGroupEntry 21 } bgpPeerGroupDefaultOriginate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Originate default route to this peer." ::= { bgpPeerGroupEntry 22 } bgpPeerGroupPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor's BGP TCP port number." ::= { bgpPeerGroupEntry 23 } bgpPeerGroupWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set default weight for routes from this peer." ::= { bgpPeerGroupEntry 24 } bgpPeerGroupCollideEstablished OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Include Neighbor in Established State for Collision Detection." ::= { bgpPeerGroupEntry 25 } bgpPeerGroupOverrideCapability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Override capability negotiation result." ::= { bgpPeerGroupEntry 26 } bgpPeerGroupStrictCapabilityMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Strict capability negotiation match." ::= { bgpPeerGroupEntry 27 } bgpPeerGroupAllowasIn OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Strict capability negotiation match." ::= { bgpPeerGroupEntry 28 } bgpPeerGroupAsOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "override AS path." ::= { bgpPeerGroupEntry 29 } -- --BGP address family -- bgpAddressFamily OBJECT IDENTIFIER ::= { bgp 6 } bgpAddressFamilyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "address family name." ::= { bgpAddressFamily 1 } bgpAddressFamilyRouterId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "Manually configured router identifier." ::= { bgpAddressFamily 2 } bgpAddressFamilyRedistConnect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute connect information from another routing protocol." ::= { bgpAddressFamily 3 } bgpAddressFamilyRedistStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute static information from another routing protocol." ::= { bgpAddressFamily 4 } bgpAddressFamilyRedistRip OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute RIP information from another routing protocol." ::= { bgpAddressFamily 5 } bgpAddressFamilyRedistOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute OSPF information from another routing protocol." ::= { bgpAddressFamily 6 } bgpAddressFamilySynchronization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform IGP synchronization." ::= { bgpAddressFamily 7 } bgpAddressFamilyDefaultInfoOrig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control distribution of default information." ::= { bgpAddressFamily 8 } bgpAddressFamilyNetworkSynch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Perform IGP synchronization on network routes." ::= { bgpAddressFamily 9 } -- --BGP clear table -- bgpClearTable OBJECT IDENTIFIER ::= { bgp 7 } bgpClearAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 1 } bgpClearExternalPeers OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 2 } bgpClearUnicastSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 3 } bgpClearMulticastSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 4 } bgpClearVpnv4UnicastSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 5 } bgpClearExternalSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 6 } bgpClearExternalUnicastSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 7 } bgpClearExternalMulticastSoftOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 8 } bgpClearSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 9 } bgpClearInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 10 } bgpClearUnicastSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 11 } bgpClearMulticastSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 12 } bgpClearUnicastInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 13 } bgpClearMulticastInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 14 } bgpClearVpnv4UnicastSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 15 } bgpClearExternalSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 16 } bgpClearExternalInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 17 } bgpClearExternalUnicastSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 18 } bgpClearExternalMulticastSoftIn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 19 } bgpClearExternalUnicastInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 20 } bgpClearExternalMulticastInPrefixFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 21 } bgpClearUnicastSoft OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 22 } bgpClearMulticastSoft OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 23 } bgpClearVpnv4UnicastSoft OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 24 } bgpClearExternalUnicastSoft OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 25 } bgpClearExternalMulticastSoft OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 26 } bgpClearDampening OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This node only supports set operation. If the value is true, it will clear all of statistics." ::= { bgpClearTable 27 } -- Sub Module: MPLS mplsLspTunnelingTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspTunnelingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel a transit LSP." ::= { mpls 1 } mplsLspTunnelingEntry OBJECT-TYPE SYNTAX MplsLspTunnelingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspTunnelingTable." INDEX { mplsLspTunnelingInLabel} ::= { mplsLspTunnelingTable 1 } MplsLspTunnelingEntry ::= SEQUENCE { mplsLspTunnelingInLabel Integer32, mplsLspTunnelingOutLabel Integer32, mplsLspTunnelingDestAddr IpAddress, mplsLspTunnelingMaskLen Integer32, mplsLspTunnelingRowStatus RowStatus, mplsLspTunnelingState INTEGER } mplsLspTunnelingInLabel OBJECT-TYPE SYNTAX Integer32 (16..1048575) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Incoming Label Value between 16 and 1048575." ::= { mplsLspTunnelingEntry 1 } mplsLspTunnelingOutLabel OBJECT-TYPE SYNTAX Integer32 (16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "Outgoing label of the transit lsp,0,3,16-1048575." ::= { mplsLspTunnelingEntry 2 } mplsLspTunnelingDestAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 network FEC for identifying tunnel LSP." ::= { mplsLspTunnelingEntry 3 } mplsLspTunnelingMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Length of iPv4 network FEC mask for identifying tunnel LSP, between 0 and 32." ::= { mplsLspTunnelingEntry 4 } mplsLspTunnelingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspTunnelingEntry 10 } mplsLspTunnelingState OBJECT-TYPE SYNTAX INTEGER {selected(1),non-selected(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the LSP tunneling entry.The meanings of the values are: selected(1) - the LSP tunneling entry is selected; non-selected(2) - the LSP tunneling entry is not selected;" ::= { mplsLspTunnelingEntry 11 } mplsMapRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsMapRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "mpls map-route A.B.C.D N F.G.H.I N." ::= { mpls 2 } mplsMapRouteEntry OBJECT-TYPE SYNTAX MplsMapRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsMapRouteTable." INDEX { mplsMapRouteSrcAddr, mplsMapRouteSrcMaskLen} ::= { mplsMapRouteTable 1 } MplsMapRouteEntry ::= SEQUENCE { mplsMapRouteSrcAddr IpAddress, mplsMapRouteSrcMaskLen Integer32, mplsMapRouteDestAddr IpAddress, mplsMapRouteDestMaskLen Integer32, mplsMapRouteTunnelName OCTET STRING, mplsMapRouteRowStatus RowStatus } mplsMapRouteSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IpAddress of IPv4 prefix to be mapped." ::= { mplsMapRouteEntry 1 } mplsMapRouteSrcMaskLen OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mask length of IPv4 prefix to be mapped.Must be between 0 and 32." ::= { mplsMapRouteEntry 2 } mplsMapRouteDestAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 Forwarding Equivalence Class for route to be mapped to." ::= { mplsMapRouteEntry 3 } mplsMapRouteDestMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Mask length for IPv4 Forwarding Equivalence Class." ::= { mplsMapRouteEntry 4 } mplsMapRouteTunnelName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS tunnel for route to be mapped to. If this node is set, mplsMapRouteDestAddr and mplsMapRouteDestMaskLen are invalid." ::= { mplsMapRouteEntry 5 } mplsMapRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsMapRouteEntry 10 } mplsEnableAllInterfaces OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable all interfaces for MPLS. 1 is enable, 2 is disable." ::= { mpls 3 } -- mplsPropagateTtl OBJECT-TYPE -- SYNTAX INTEGER -- { -- enable(1), -- disable(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Enable/disable mpls PropagateTtl. -- 1 is enable, 2 is disable." -- ::= { mpls 4} mplsVpwsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specify an MPLS Layer-2 Virtual Circuit." ::= { mpls 5 } mplsVpwsEntry OBJECT-TYPE SYNTAX MplsVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVpwsTable." INDEX { mplsVpwsVcId} ::= { mplsVpwsTable 1 } MplsVpwsEntry ::= SEQUENCE { mplsVpwsVcId Unsigned32, mplsVpwsVcName OCTET STRING, mplsVpwsPeerAddr IpAddress, mplsVpwsIsManual Integer32, mplsVpwsMtu Integer32, mplsVpwsPwMode Integer32, mplsVpwsControlWord INTEGER, mplsVpwsStats INTEGER, mplsVpwsRowStatus RowStatus, mplsVpwsState INTEGER } mplsVpwsVcId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Layer-2 Virtual Circuit." ::= { mplsVpwsEntry 1 } mplsVpwsVcName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifying string for MPLS Layer-2 Virtual Circuit. Only 20 octets is accepted.." ::= { mplsVpwsEntry 2 } mplsVpwsPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IPv4 Address for end-point for MPLS Layer-2 Virtual Circuit." ::= { mplsVpwsEntry 3 } mplsVpwsIsManual OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "If this value is set , vc will be configured by manual. 1 means manual is set,2 means not." ::= { mplsVpwsEntry 4 } mplsVpwsMtu OBJECT-TYPE SYNTAX Integer32(576..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify l2-circuit mtu,l2-circuit mtu value <576-65535>" ::= { mplsVpwsEntry 5 } mplsVpwsPwMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "PW raw/tagged mode.0 means default mode, 1 means raw,2 means tagged mode." DEFVAL { 0 } ::= { mplsVpwsEntry 6 } mplsVpwsControlWord OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Set control word for mpls layer2 circuit. The meanings of the values are: enable(1) - enable control word; disable(2) - disable control word;" DEFVAL { 2 } ::= { mplsVpwsEntry 7 } mplsVpwsStats OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Set statstics status for mpls layer2 circuit. The meanings of the values are: enable(1) - enable statistics; disable(2) - disable statistics;" DEFVAL { 2 } ::= { mplsVpwsEntry 8 } mplsVpwsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVpwsEntry 15 } mplsVpwsState OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls layer2 circuit. The meanings of the values are: active(1) - the l2 circuit is active; inactive(2) - the l2 circuit is inactive;" ::= { mplsVpwsEntry 16 } -- mplsVpwsIngressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress packets number of mpls vpws." -- ::= { mplsVpwsEntry 17 } -- -- mplsVpwsIngressbytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress bytes number of mpls vpws." -- ::= { mplsVpwsEntry 18 } -- -- mplsVpwsEgressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress packets number of mpls vpws." -- ::= { mplsVpwsEntry 19 } -- -- mplsVpwsEgressBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress bytes number of mpls vpws." -- ::= { mplsVpwsEntry 20 } mplsVpwsFibTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVpwsFibEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Layer-2 MPLS Virtual Circuit FIB entry." ::= { mpls 6 } mplsVpwsFibEntry OBJECT-TYPE SYNTAX MplsVpwsFibEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Layer-2 MPLS Virtual Circuit FIB entry." INDEX { mplsVpwsFibVcId} ::= { mplsVpwsFibTable 1 } MplsVpwsFibEntry ::= SEQUENCE { mplsVpwsFibVcId Unsigned32, mplsVpwsFibInLabel Integer32, mplsVpwsFibOutLabel Integer32, mplsVpwsFibRowStatus RowStatus } mplsVpwsFibVcId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual Circuit Identifier." ::= { mplsVpwsFibEntry 1 } mplsVpwsFibInLabel OBJECT-TYPE SYNTAX Integer32 (16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "In-coming Label <16-1048575>." ::= { mplsVpwsFibEntry 2 } mplsVpwsFibOutLabel OBJECT-TYPE SYNTAX Integer32 (16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going Label <16-1048575>." ::= { mplsVpwsFibEntry 3 } mplsVpwsFibRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVpwsFibEntry 4 } --mplsVplsVlanTable OBJECT-TYPE -- SYNTAX OCTET STRING -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This defines the minnum and maxnum of vlan id.The string must be 'min,max', -- and '0,0' means set vpls vlan id range to default(0,0). -- Minnum,maxnum must be between 2 and 4096." -- ::= { mpls 7 } mplsVplsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance of MPLS based Virtual Private Lan Service (VPLS)." ::= { mpls 8 } mplsVplsEntry OBJECT-TYPE SYNTAX MplsVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of mplsVplsTable." INDEX { mplsVplsId } ::= { mplsVplsTable 1 } MplsVplsEntry ::= SEQUENCE { mplsVplsId Unsigned32, mplsVplsName OCTET STRING, mplsVplsWhiteList INTEGER, -- mplsVplsEtreeType INTEGER, mplsVplsRowStatus RowStatus, mplsVplsDescription OCTET STRING, mplsVplsMtu Integer32, mplsVplsMacLearning INTEGER, mplsVplsMacLimitNum Unsigned32, mplsVplsMacLimitAction INTEGER, mplsVplsAllowFlooding INTEGER, -- mplsVplsAllowUnknownUnicast INTEGER, -- mplsVplsAllowMulticast INTEGER, mplsVplsState INTEGER -- mplsVplsMPeerR Integer32, -- mplsVplsMPeerT Integer32, -- mplsVplsSPeer Integer32 } mplsVplsId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsEntry 1 } mplsVplsName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Identifying string for VPLS." ::= { mplsVplsEntry 2 } -- mplsVplsEtreeType OBJECT-TYPE -- SYNTAX INTEGER {root(1),leaf(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Specify the E-tree type the VSI is emulating. The meanings of the values are: -- root(1) - All AC in the VSI on this node will be root-ACs; -- leaf(2) - All AC in the VSI on this node will be leaf-ACs;" -- DEFVAL { 1 } -- ::= { mplsVplsEntry 3 } mplsVplsWhiteList OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whitelist for the MPLS VPLS. The meanings of the values are: enable(1) - Enable whitelist mode; disable(2) - Disable whitelist mode;;" DEFVAL { 2 } ::= { mplsVplsEntry 5 } mplsVplsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVplsEntry 10 } mplsVplsDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing this VPLS instance.Only less than 20 octets is accepted." ::= { mplsVplsEntry 11 } mplsVplsMtu OBJECT-TYPE SYNTAX Integer32 (576..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Mtu value of a vpls instance ." ::= { mplsVplsEntry 12 } mplsVplsMacLearning OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set mac learning for the MPLS VPLS. The meanings of the values are: enable(1) - Enable mac learning; disable(2) - Disable mac learning;" DEFVAL { 1 } ::= { mplsVplsEntry 13 } mplsVplsMacLimitNum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum fdb number of the MPLS VPLS." ::= { mplsVplsEntry 14 } mplsVplsMacLimitAction OBJECT-TYPE SYNTAX INTEGER {default(1),warn(2), discard(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set warning log when learning is disabled. The meanings of the values are: default(1) - farward packets with mac learning disable; warn(2) - warning log and discard packets; discard(3) - discard packets." DEFVAL { 1 } ::= { mplsVplsEntry 15 } mplsVplsAllowFlooding OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set flooding broadcast, multicast and unicast packets. The meanings of the values are: enable(1) - Enable flooding unknown unicast; disable(2) - Disable flooding unknown unicast;" DEFVAL { 1 } ::= { mplsVplsEntry 16 } --mplsVplsAllowUnknownUnicast OBJECT-TYPE -- SYNTAX INTEGER {enable(1),disable(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Set flooding unknown unicast packets. The meanings of the values are: -- enable(1) - Enable flooding unknown unicast; -- disable(2) - Disable flooding unknown unicast;" -- DEFVAL { 1 } -- ::= { mplsVplsEntry 17 } -- --mplsVplsAllowMulticast OBJECT-TYPE -- SYNTAX INTEGER {enable(1),disable(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Set flooding multicast packets. The meanings of the values are: -- enable(1) - Enable flooding multicast; -- disable(2) - Disable flooding multicast;" -- DEFVAL { 1 } -- ::= { mplsVplsEntry 18 } mplsVplsState OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "VPLS instance state. The meanings of the values are: active(1) - VPLS instance is active; inactive(2) - VPLS instance is inactive;" ::= { mplsVplsEntry 20 } -- mplsVplsRawMeshPeerNum OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the number the vpls raw mesh peers." -- ::= { mplsVplsEntry 21 } -- -- mplsVplsTaggedMeshPeerNum OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the number the vpls tagged mesh peer." -- ::= { mplsVplsEntry 22 } -- -- mplsVplsSpokePeerNum OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the number the vpls spoke peers." -- ::= { mplsVplsEntry 23 } mplsVplsPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peers to VPLS domains." ::= { mpls 9 } mplsVplsPeerEntry OBJECT-TYPE SYNTAX MplsVplsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsPeerTable." INDEX { mplsVplsPeerVplsId, mplsVplsPeerPeerAddr} ::= { mplsVplsPeerTable 1 } MplsVplsPeerEntry ::= SEQUENCE { mplsVplsPeerVplsId Unsigned32, mplsVplsPeerPeerAddr IpAddress, mplsVplsPeerType Integer32, mplsVplsPeerIsManul Integer32, mplsVplsPeerControlWord INTEGER, mplsVplsPeerStats INTEGER, mplsVplsPeerPEType INTEGER, mplsVplsPeerRowStatus RowStatus, mplsVplsPeerState INTEGER } mplsVplsPeerVplsId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsPeerEntry 1 } mplsVplsPeerPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of the peer node to be added." ::= { mplsVplsPeerEntry 2 } mplsVplsPeerType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Set 1, if Peer Virtual Circuits type is Raw mode; Set 2, if Peer Virtual Circuits type is Tagged mode." ::= { mplsVplsPeerEntry 3 } mplsVplsPeerIsManul OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "No signaling is used to set-up the Virtual Circuit. 1 means manual is set, 2 means not." ::= { mplsVplsPeerEntry 4 } mplsVplsPeerControlWord OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set control word for mpls vpls peer. The meanings of the values are: enable(1) - enable control word; disable(2) - disable control word;" DEFVAL { 2 } ::= { mplsVplsPeerEntry 5 } mplsVplsPeerStats OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Set statistics for mpls vpls peer. The meanings of the values are: enable(1) - enable statistics; disable(2) - disable statistics;" DEFVAL { 2 } ::= { mplsVplsPeerEntry 6 } mplsVplsPeerPEType OBJECT-TYPE SYNTAX INTEGER {spe(1),upe(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Set PW type for mpls vpls peer. The meanings of the values are: spe(1) - Superstarum PE; upe(2) - Underlayer PE;" DEFVAL { 1 } ::= { mplsVplsPeerEntry 7 } mplsVplsPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVplsPeerEntry 15 } mplsVplsPeerState OBJECT-TYPE SYNTAX INTEGER {up(1),down(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of mpls vpls peer. The meanings of the values are: up(1) - the vpls peer is up; down(2) - the vpls peer is down;" DEFVAL { 2 } ::= { mplsVplsPeerEntry 16 } -- mplsVplsPeerIngressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress packets number of mpls vpls peer." -- ::= { mplsVplsPeerEntry 17 } -- -- mplsVplsPeerIngressbytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress bytes number of mpls vpls peer." -- ::= { mplsVplsPeerEntry 18 } -- -- mplsVplsPeerEgressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress packets number of mpls vpls peer." -- ::= { mplsVplsPeerEntry 19 } -- -- mplsVplsPeerEgressBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress bytes number of mpls vpls peer." -- ::= { mplsVplsPeerEntry 20 } mplsVplsFibAddTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsFibAddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls fib table." ::= { mpls 10 } mplsVplsFibAddEntry OBJECT-TYPE SYNTAX MplsVplsFibAddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPLS Fib entrys." INDEX { mplsVplsFibAddVplsId, mplsVplsFibAddPeerAddr} ::= { mplsVplsFibAddTable 1 } MplsVplsFibAddEntry ::= SEQUENCE { mplsVplsFibAddVplsId Integer32, mplsVplsFibAddPeerAddr IpAddress, mplsVplsFibAddInLabel Integer32, mplsVplsFibAddOutLabel Integer32, mplsVplsFibAddRowStatus RowStatus } mplsVplsFibAddVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsFibAddEntry 1 } mplsVplsFibAddPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mesh Peer IPv4 Address." ::= { mplsVplsFibAddEntry 2 } mplsVplsFibAddInLabel OBJECT-TYPE SYNTAX Integer32(16..2063) MAX-ACCESS read-create STATUS current DESCRIPTION "In-coming Label <16-2063>." ::= { mplsVplsFibAddEntry 3 } mplsVplsFibAddOutLabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going Label <16-1048575>." ::= { mplsVplsFibAddEntry 4 } mplsVplsFibAddRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVplsFibAddEntry 5 } mplsInterfaceMplsVpwsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfaceMplsVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One MPLS layer-2 virtual circuit can only band to one interface, but one interface may be banded to many VCs." ::= { mpls 11 } mplsInterfaceMplsVpwsEntry OBJECT-TYPE SYNTAX MplsInterfaceMplsVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsInterfaceMplsVpwsTable." INDEX { mplsInterfaceMplsVpwsIfIndex, mplsInterfaceMplsVpwsVcName, mplsInterfaceMplsVpwsVlanId} ::= { mplsInterfaceMplsVpwsTable 1 } MplsInterfaceMplsVpwsEntry ::= SEQUENCE { mplsInterfaceMplsVpwsIfIndex Integer32, mplsInterfaceMplsVpwsVcName OCTET STRING, mplsInterfaceMplsVpwsVlanId Integer32, mplsInterfaceMplsVpwsBundling INTEGER, mplsInterfaceMplsVpwsStatisticEn INTEGER, mplsInterfaceMplsVpwsReplaceDscp INTEGER, mplsInterfaceMplsVpwsReplaceCos INTEGER, mplsInterfaceMplsVpwsVlanOperation OCTET STRING, mplsInterfaceMplsVpwsRowStatus RowStatus } mplsInterfaceMplsVpwsIfIndex OBJECT-TYPE SYNTAX Integer32 (1..48) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { mplsInterfaceMplsVpwsEntry 1 } mplsInterfaceMplsVpwsVcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for MPLS layer-2 virtual circuit." ::= { mplsInterfaceMplsVpwsEntry 2 } mplsInterfaceMplsVpwsVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan identifier." ::= { mplsInterfaceMplsVpwsEntry 3 } mplsInterfaceMplsVpwsBundling OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of bundling." DEFVAL { disable } ::= { mplsInterfaceMplsVpwsEntry 4 } mplsInterfaceMplsVpwsStatisticEn OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of statistic enable." DEFVAL { disable } ::= { mplsInterfaceMplsVpwsEntry 5 } mplsInterfaceMplsVpwsReplaceDscp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of replace dscp enable." DEFVAL { disable } ::= { mplsInterfaceMplsVpwsEntry 6 } mplsInterfaceMplsVpwsReplaceCos OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of replace cos enable." DEFVAL { disable } ::= { mplsInterfaceMplsVpwsEntry 7 } mplsInterfaceMplsVpwsVlanOperation OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifying vlan operation table name for MPLS layer-2 virtual circuit." ::= { mplsInterfaceMplsVpwsEntry 8 } mplsInterfaceMplsVpwsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsInterfaceMplsVpwsEntry 10 } mplsInterfacePropertyTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfacePropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface property table.Including label-switching and configuration of MPLS-TP P2P MAC." ::= { mpls 12 } mplsInterfacePropertyEntry OBJECT-TYPE SYNTAX MplsInterfacePropertyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration of interface label-switching and MPLS-TP P2P MAC." INDEX { mplsInterfacePropertyIfIndex} ::= { mplsInterfacePropertyTable 1 } MplsInterfacePropertyEntry ::= SEQUENCE { mplsInterfacePropertyIfIndex Integer32, mplsInterfaceLabelSwitching INTEGER, mplsInterfaceTPP2PTxMac MacAddress, mplsInterfaceCRCNumberThresholdRising OCTET STRING, mplsInterfaceCRCNumberThresholdFalling OCTET STRING, mplsInterfaceCRCRateThresholdRising Integer32, mplsInterfaceCRCRateThresholdFalling Integer32, mplsInterfaceCRCAlarmStatus INTEGER } mplsInterfacePropertyIfIndex OBJECT-TYPE SYNTAX Integer32(2..48) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { mplsInterfacePropertyEntry 1 } mplsInterfaceLabelSwitching OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set label-switching of the interface. This node is valid when the interface is a routed interface. The meanings of the values are: enable(1) - Enable label-switching; disable(2) - Disable label-switching;" DEFVAL { 2 } ::= { mplsInterfacePropertyEntry 4 } mplsInterfaceTPP2PTxMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit mac address for mpls-tp non-ip system." ::= { mplsInterfacePropertyEntry 5 } mplsInterfaceCRCNumberThresholdRising OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Rising threshold for CRC error number." ::= { mplsInterfacePropertyEntry 6 } mplsInterfaceCRCNumberThresholdFalling OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Falling threshold for CRC error number." ::= { mplsInterfacePropertyEntry 7 } mplsInterfaceCRCRateThresholdRising OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Rising threshold for CRC error rate." ::= { mplsInterfacePropertyEntry 8 } mplsInterfaceCRCRateThresholdFalling OBJECT-TYPE SYNTAX Integer32(0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Falling threshold for CRC error rate." ::= { mplsInterfacePropertyEntry 9 } mplsInterfaceCRCAlarmStatus OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Interface CRC alarm status." ::= { mplsInterfacePropertyEntry 10 } mplsInterfaceMplsVplsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfaceMplsVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of relationship of Vpls instance and interface." ::= { mpls 13 } mplsInterfaceMplsVplsEntry OBJECT-TYPE SYNTAX MplsInterfaceMplsVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsInterfaceMplsVplsTable." INDEX { mplsInterfaceMplsVplsIfIndex, mplsInterfaceMplsVplsVplsName, mplsInterfaceMplsVplsVlanId} ::= { mplsInterfaceMplsVplsTable 1 } MplsInterfaceMplsVplsEntry ::= SEQUENCE { mplsInterfaceMplsVplsIfIndex Integer32, mplsInterfaceMplsVplsVplsName OCTET STRING, mplsInterfaceMplsVplsVlanId Integer32, mplsInterfaceMplsVplsBundling INTEGER, mplsInterfaceMplsVplsStatisticEn INTEGER, mplsInterfaceMplsVplsETreeACType INTEGER, mplsInterfaceMplsVplsReplaceDscp INTEGER, mplsInterfaceMplsVplsReplaceCos INTEGER, mplsInterfaceMplsVplsVlanOperation OCTET STRING, mplsInterfaceMplsVplsRowStatus RowStatus } mplsInterfaceMplsVplsIfIndex OBJECT-TYPE SYNTAX Integer32 (1..48) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { mplsInterfaceMplsVplsEntry 1 } mplsInterfaceMplsVplsVplsName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for vlan." ::= { mplsInterfaceMplsVplsEntry 2 } mplsInterfaceMplsVplsVlanId OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for vlan.." ::= { mplsInterfaceMplsVplsEntry 3 } mplsInterfaceMplsVplsBundling OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of bundling." DEFVAL { disable } ::= { mplsInterfaceMplsVplsEntry 4 } mplsInterfaceMplsVplsStatisticEn OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of statistics enable." DEFVAL { disable } ::= { mplsInterfaceMplsVplsEntry 5 } mplsInterfaceMplsVplsETreeACType OBJECT-TYPE SYNTAX INTEGER {leaf(1), root(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Etree AC type." DEFVAL { root } ::= { mplsInterfaceMplsVplsEntry 6 } mplsInterfaceMplsVplsReplaceDscp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of replace dscp." DEFVAL { disable } ::= { mplsInterfaceMplsVplsEntry 7 } mplsInterfaceMplsVplsReplaceCos OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of replace cos enable." DEFVAL { disable } ::= { mplsInterfaceMplsVplsEntry 8 } mplsInterfaceMplsVplsVlanOperation OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifying vlan operation table name." ::= { mplsInterfaceMplsVplsEntry 9 } mplsInterfaceMplsVplsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsInterfaceMplsVplsEntry 10 } mplsLspPeTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls lsp-pe instances." ::= { mpls 14 } mplsLspPeEntry OBJECT-TYPE SYNTAX MplsLspPeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPeTable." INDEX { mplsLspPeName} ::= { mplsLspPeTable 1 } MplsLspPeEntry ::= SEQUENCE { mplsLspPeName OCTET STRING, mplsLspPeRowStatus RowStatus, mplsLspPeState INTEGER, mplsLspPeDescription OCTET STRING, mplsLspPeOAMMegLevel Integer32, mplsLspPeOAMMegId OCTET STRING, mplsLspPeOAMMegIdIcc Integer32, mplsLspPeOAMMepId Integer32, mplsLspPeOAMMepInterval INTEGER, mplsLspPeOAMMepExp Integer32, mplsLspPeOAMRMepId Integer32, mplsLspPeOAMCCState INTEGER, mplsLspPeOAMEventCacheSize Integer32, mplsLspPeOAM1dmCacheSize Integer32, mplsLspPeOAMAisInterval Integer32, mplsLspPeOAMAisClientSupress INTEGER, mplsLspPeOAMLckInterval Integer32, mplsLspPeOAMLck INTEGER, mplsLspPeOAMEvtLOC INTEGER, mplsLspPeOAMEvtUMP INTEGER, mplsLspPeOAMEvtUIN INTEGER, mplsLspPeOAMEvtUMG INTEGER, mplsLspPeOAMEvtULV INTEGER, mplsLspPeOAMEvtW1ST INTEGER, mplsLspPeOAMEvtRDIR INTEGER, mplsLspPeOAMEvtRDIT INTEGER, mplsLspPeOAMEvtAISR INTEGER, mplsLspPeOAMEvtAIST INTEGER, mplsLspPeOAMEvtAISD INTEGER, mplsLspPeOAMEvtLCKR INTEGER, mplsLspPeOAMEvtLCKT INTEGER, mplsLspPeOAMEvtLCKD INTEGER, mplsLspPeOAMLckTxEnable INTEGER, mplsLspPeOAMEvtCRC INTEGER, mplsLspPeOAMState INTEGER, mplsLspPeIngressPkts Counter64, mplsLspPeIngressBytes Counter64, mplsLspPeEgressPkts Counter64, mplsLspPeEgressBytes Counter64, mplsLspPeStats INTEGER, mplsLspPeBandwidth Integer32, mplsLspPeOAMLmDualExp Integer32, mplsLspPeOAMLmDualStatInterval Integer32, mplsLspPeOAMLmDualCacheSize Integer32, mplsLspPeOAMLmSingleExp Integer32, mplsLspPeOAMLmSingleInterval INTEGER, mplsLspPeOAMLmSingleCacheSize Integer32, mplsLspPeOAMLmEnableState INTEGER, mplsLspPeOAMLmLocalLossThreshold Integer32, mplsLspPeOAMLmRemoteLossThreshold Integer32, mplsLspPeOAMLmSingleRxCount Integer32, mplsLspPeOAMLmSingleTxCount Integer32, mplsLspPeOAMLmSingleSuccessRate Integer32, mplsLspPeOAMLmSingleStartTime OCTET STRING, mplsLspPeOAMLmSingleEndTime OCTET STRING } mplsLspPeName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-pe." ::= { mplsLspPeEntry 1 } mplsLspPeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPeEntry 10 } mplsLspPeState OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the lsp-pe. The meanings of the values are: active(1) - the lsp-pe is active; inactive(2) - the lsp-pe is inactive;" ::= { mplsLspPeEntry 11 } mplsLspPeDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this pe type LSP. Only less than 20 octets is accepted." ::= { mplsLspPeEntry 12 } mplsLspPeOAMMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "OAM level." DEFVAL { 7 } ::= { mplsLspPeEntry 20 } mplsLspPeOAMMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "MEG ID of the lsp-pe." ::= { mplsLspPeEntry 21 } mplsLspPeOAMMegIdIcc OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ICC length of MEG ID." DEFVAL { 6 } ::= { mplsLspPeEntry 22 } mplsLspPeOAMMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "MEP ID." ::= { mplsLspPeEntry 23 } mplsLspPeOAMMepInterval OBJECT-TYPE SYNTAX INTEGER { three-point-three-ms(1), ten-ms(2), one-hundred-ms(3), one-sec(4), ten-sec(5), one-min(6), ten-min(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "MEP Interval." ::= { mplsLspPeEntry 24 } mplsLspPeOAMMepExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "EXP value, default is 7." DEFVAL { 7 } ::= { mplsLspPeEntry 25 } mplsLspPeOAMRMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP ID." ::= { mplsLspPeEntry 26 } mplsLspPeOAMCCState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CC state." DEFVAL { disable } ::= { mplsLspPeEntry 27 } mplsLspPeOAMEventCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Event entry cache size." DEFVAL { 8 } ::= { mplsLspPeEntry 28 } mplsLspPeOAM1dmCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "1dm entry cache size." DEFVAL { 8 } ::= { mplsLspPeEntry 29 } mplsLspPeOAMAisInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval of AIS PDU. 0:no oam-y1731 ais server enable." ::= { mplsLspPeEntry 30 } mplsLspPeOAMAisClientSupress OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "AIS client supress state." DEFVAL { disable } ::= { mplsLspPeEntry 31 } mplsLspPeOAMLckInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-write STATUS current DESCRIPTION "Lsp-pe lock interval. 0:no oam-y1731 lck server enable." DEFVAL { 0 } ::= { mplsLspPeEntry 32 } mplsLspPeOAMLck OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Lck state." DEFVAL { disable } ::= { mplsLspPeEntry 33 } mplsLspPeOAMEvtLOC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Loc state." DEFVAL { disable } ::= { mplsLspPeEntry 34 } mplsLspPeOAMEvtUMP OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp RMEPID state." DEFVAL { disable } ::= { mplsLspPeEntry 35 } mplsLspPeOAMEvtUIN OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp interval state." DEFVAL { disable } ::= { mplsLspPeEntry 36 } mplsLspPeOAMEvtUMG OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp MEGID state." DEFVAL { disable } ::= { mplsLspPeEntry 37 } mplsLspPeOAMEvtULV OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp Level state." DEFVAL { disable } ::= { mplsLspPeEntry 38 } mplsLspPeOAMEvtW1ST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Wait 1st CCM state." DEFVAL { disable } ::= { mplsLspPeEntry 39 } mplsLspPeOAMEvtRDIR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI RX state." DEFVAL { disable } ::= { mplsLspPeEntry 40 } mplsLspPeOAMEvtRDIT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI TX state." DEFVAL { disable } ::= { mplsLspPeEntry 41 } mplsLspPeOAMEvtAISR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsLspPeEntry 42 } mplsLspPeOAMEvtAIST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsLspPeEntry 43 } mplsLspPeOAMEvtAISD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsLspPeEntry 44 } mplsLspPeOAMEvtLCKR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsLspPeEntry 45 } mplsLspPeOAMEvtLCKT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsLspPeEntry 46 } mplsLspPeOAMEvtLCKD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsLspPeEntry 47 } mplsLspPeOAMLckTxEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "oam-y1731 lck server enable." DEFVAL { 2 } ::= { mplsLspPeEntry 48 } mplsLspPeOAMEvtCRC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "CRC RX state." DEFVAL { disable } ::= { mplsLspPeEntry 49 } mplsLspPeOAMState OBJECT-TYPE SYNTAX INTEGER {init(0), fail(1), ok(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "oam-y1731 Rmep state." ::= { mplsLspPeEntry 50 } mplsLspPeIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packtes number of lsp-pe." ::= { mplsLspPeEntry 51 } mplsLspPeIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of lsp-pe." ::= { mplsLspPeEntry 52 } mplsLspPeEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packtes number of lsp-pe." ::= { mplsLspPeEntry 53 } mplsLspPeEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of lsp-pe." ::= { mplsLspPeEntry 54 } mplsLspPeStats OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "statistics enable." DEFVAL { disable } ::= { mplsLspPeEntry 55 } mplsLspPeBandwidth OBJECT-TYPE SYNTAX Integer32 (-1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "lsp-pe bandwidth in kbps. -1 means no limitation" ::= { mplsLspPeEntry 56 } mplsLspPeOAMLmDualExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsLspPeEntry 61 } mplsLspPeOAMLmDualStatInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment interval value." DEFVAL { 1 } ::= { mplsLspPeEntry 62 } mplsLspPeOAMLmDualCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsLspPeEntry 63 } mplsLspPeOAMLmSingleExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsLspPeEntry 66 } mplsLspPeOAMLmSingleInterval OBJECT-TYPE SYNTAX INTEGER { one-hundred-ms(1), one-sec(2), ten-sec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config Interval." ::= { mplsLspPeEntry 67 } mplsLspPeOAMLmSingleCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsLspPeEntry 68 } mplsLspPeOAMLmEnableState OBJECT-TYPE SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable oam-y1731 loss measurment." DEFVAL { disable } ::= { mplsLspPeEntry 70 } mplsLspPeOAMLmLocalLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsLspPeEntry 71 } mplsLspPeOAMLmRemoteLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsLspPeEntry 72 } mplsLspPeOAMLmSingleRxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Rx count." ::= { mplsLspPeEntry 73 } mplsLspPeOAMLmSingleTxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Tx count." ::= { mplsLspPeEntry 74 } mplsLspPeOAMLmSingleSuccessRate OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended success rate." ::= { mplsLspPeEntry 75 } mplsLspPeOAMLmSingleStartTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended start time." ::= { mplsLspPeEntry 76 } mplsLspPeOAMLmSingleEndTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended end time." ::= { mplsLspPeEntry 77 } mplsLspPeIngressTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPeIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls lsp-pe ingress configure." ::= { mpls 15 } mplsLspPeIngressEntry OBJECT-TYPE SYNTAX MplsLspPeIngressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPeIngressTable." INDEX { mplsLspPeIngressLspName } ::= { mplsLspPeIngressTable 1 } MplsLspPeIngressEntry ::= SEQUENCE { mplsLspPeIngressLspName OCTET STRING, mplsLspPeIngressInlabel Integer32, mplsLspPeIngressRowStatus RowStatus } mplsLspPeIngressLspName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-pe." ::= { mplsLspPeIngressEntry 1 } mplsLspPeIngressInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "Incoming label of the Lsp-pe." ::= { mplsLspPeIngressEntry 2 } mplsLspPeIngressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPeIngressEntry 10 } mplsLspPeEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPeEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls lsp-pe egress configure." ::= { mpls 16 } mplsLspPeEgressEntry OBJECT-TYPE SYNTAX MplsLspPeEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of mplsLspPeEgressTable." INDEX { mplsLspPeEgressLspName } ::= { mplsLspPeEgressTable 1 } MplsLspPeEgressEntry ::= SEQUENCE { mplsLspPeEgressLspName OCTET STRING, mplsLspPeEgressOutlabel Integer32, mplsLspPeEgressNextHop IpAddress, mplsLspPeEgressOutIfindex Integer32, mplsLspPeEgressOutMemIfindex Integer32, mplsLspPeEgressRowStatus RowStatus } mplsLspPeEgressLspName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-pe." ::= { mplsLspPeEgressEntry 1 } mplsLspPeEgressOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "Outgoing label of the Lsp-pe." ::= { mplsLspPeEgressEntry 2 } mplsLspPeEgressNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Nexthop Address(IPV4) for the Lsp-pe. Out-going interface and nexthop ip address can not be configured at the same time." ::= { mplsLspPeEgressEntry 3 } mplsLspPeEgressOutIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Outgoing interface for the Lsp-pe. Out-going interface and nexthop ip address can not be configured at the same time." ::= { mplsLspPeEgressEntry 4 } mplsLspPeEgressOutMemIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Member port index, this field is required only when out-going interface is vlan interface." ::= { mplsLspPeEgressEntry 5 } mplsLspPeEgressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPeEgressEntry 10 } mplsLspPTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls lsp-p instances." ::= { mpls 17 } mplsLspPEntry OBJECT-TYPE SYNTAX MplsLspPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPTable." INDEX { mplsLspPName} ::= { mplsLspPTable 1 } MplsLspPEntry ::= SEQUENCE { mplsLspPName OCTET STRING, mplsLspPRowStatus RowStatus, mplsLspPOAMMegId OCTET STRING, mplsLspPOAMMegIdIcc Integer32, mplsLspPOAMMipState INTEGER, mplsLspPOAMMegLevel Integer32, mplsLspPDescription OCTET STRING, mplsLspPStats INTEGER } mplsLspPName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-p." ::= { mplsLspPEntry 1 } mplsLspPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPEntry 10 } mplsLspPOAMMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "MEG ID of the lsp-p." ::= { mplsLspPEntry 11 } mplsLspPOAMMegIdIcc OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ICC length of MEG ID." DEFVAL { 6 } ::= { mplsLspPEntry 12 } mplsLspPOAMMipState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "MIP state of the lsp." DEFVAL { disable } ::= { mplsLspPEntry 13 } mplsLspPOAMMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "OAM level." DEFVAL { 7 } ::= { mplsLspPEntry 14 } mplsLspPDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this p type LSP. Only less than 20 octets is accepted." ::= { mplsLspPEntry 15 } mplsLspPStats OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set statistics for mpls lsp-p. The meanings of the values are: enable(1) - enable statistics; disable(2) - disable statistics;" DEFVAL { 2 } ::= { mplsLspPEntry 16 } mplsLspPEastTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPEastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of east configuration of all mpls lsp-p instances." ::= { mpls 18 } mplsLspPEastEntry OBJECT-TYPE SYNTAX MplsLspPEastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPfEastTable." INDEX { mplsLspPEastLspName} ::= { mplsLspPEastTable 1 } MplsLspPEastEntry ::= SEQUENCE { mplsLspPEastLspName OCTET STRING, mplsLspPEastInlabel Integer32, mplsLspPEastOutlabel Integer32, mplsLspPEastNextHop IpAddress, mplsLspPEastTunnel OCTET STRING, mplsLspPEastOutIfindex Integer32, mplsLspPEastOutMemIfindex Integer32, mplsLspPEastReplaceExp INTEGER, mplsLspPEastRowStatus RowStatus, mplsLspPEastState INTEGER, mplsLspPEastIngressPkts Counter64, mplsLspPEastIngressbytes Counter64, mplsLspPEastEgressPkts Counter64, mplsLspPEastEgressBytes Counter64 } mplsLspPEastLspName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-p." ::= { mplsLspPEastEntry 1 } mplsLspPEastInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "East incoming label of the Lsp-p." ::= { mplsLspPEastEntry 2 } mplsLspPEastOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "East outgoing label of the Lsp-p." ::= { mplsLspPEastEntry 3 } mplsLspPEastNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "East nexthop Address(IPV4) for the Lsp-p." ::= { mplsLspPEastEntry 4 } mplsLspPEastTunnel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "East tunnel name." ::= { mplsLspPEastEntry 5 } mplsLspPEastOutIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Outgoing interface for the Lsp-p. Out-going interface , tunnel, and nexthop ip address can not be configured at the same time." ::= { mplsLspPEastEntry 6 } mplsLspPEastOutMemIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Member port index, this field is required only when out-going interface is vlan interface." ::= { mplsLspPEastEntry 7 } mplsLspPEastReplaceExp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Replace exp." ::= { mplsLspPEastEntry 8 } mplsLspPEastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPEastEntry 10 } mplsLspPEastState OBJECT-TYPE SYNTAX INTEGER {active(1), inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls lsp-p east. The meanings of the values are: active(1) - active; inactive(2) - inactive;" ::= { mplsLspPEastEntry 11 } mplsLspPEastIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packets number of lsp-p east." ::= { mplsLspPEastEntry 20 } mplsLspPEastIngressbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of lsp-p east." ::= { mplsLspPEastEntry 21 } mplsLspPEastEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packets number of lsp-p east." ::= { mplsLspPEastEntry 22 } mplsLspPEastEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of lsp-p east." ::= { mplsLspPEastEntry 23 } mplsLspPWestTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPWestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of west configuration of all mpls lsp-p instances." ::= { mpls 19 } mplsLspPWestEntry OBJECT-TYPE SYNTAX MplsLspPWestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPWestTable." INDEX { mplsLspPWestLspName} ::= { mplsLspPWestTable 1 } MplsLspPWestEntry ::= SEQUENCE { mplsLspPWestLspName OCTET STRING, mplsLspPWestInlabel Integer32, mplsLspPWestOutlabel Integer32, mplsLspPWestNextHop IpAddress, mplsLspPWestTunnel OCTET STRING, mplsLspPWestOutIfindex Integer32, mplsLspPWestOutMemIfindex Integer32, mplsLspPWestReplaceExp INTEGER, mplsLspPWestRowStatus RowStatus, mplsLspPWestState INTEGER, mplsLspPWestIngressPkts Counter64, mplsLspPWestIngressbytes Counter64, mplsLspPWestEgressPkts Counter64, mplsLspPWestEgressBytes Counter64 } mplsLspPWestLspName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-p." ::= { mplsLspPWestEntry 1 } mplsLspPWestInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "West incoming label of the Lsp-p." ::= { mplsLspPWestEntry 2 } mplsLspPWestOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "West outgoing label of the Lsp-p." ::= { mplsLspPWestEntry 3 } mplsLspPWestNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "West nexthop Address(IPV4) for the Lsp-p." ::= { mplsLspPWestEntry 4 } mplsLspPWestTunnel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "West tunnel name." ::= { mplsLspPWestEntry 5 } mplsLspPWestOutIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Outgoing interface for the Lsp-p. Out-going interface , tunnel, and nexthop ip address can not be configured at the same time." ::= { mplsLspPWestEntry 6 } mplsLspPWestOutMemIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Member port index, this field is required only when out-going interface is vlan interface." ::= { mplsLspPWestEntry 7 } mplsLspPWestReplaceExp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Replace exp." ::= { mplsLspPWestEntry 8 } mplsLspPWestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsLspPWestEntry 10 } mplsLspPWestState OBJECT-TYPE SYNTAX INTEGER {active(1), inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls lsp-p west. The meanings of the values are: active(1) - active; inactive(2) - inactive;" ::= { mplsLspPWestEntry 11 } mplsLspPWestIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packets number of lsp-p west." ::= { mplsLspPWestEntry 20 } mplsLspPWestIngressbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of lsp-p west." ::= { mplsLspPWestEntry 21 } mplsLspPWestEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packets number of lsp-p west." ::= { mplsLspPWestEntry 22 } mplsLspPWestEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of lsp-p west." ::= { mplsLspPWestEntry 23 } mplsTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls tunnel instances." ::= { mpls 20 } mplsTunnelEntry OBJECT-TYPE SYNTAX MplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTunnelTable." INDEX { mplsTunnelName} ::= { mplsTunnelTable 1 } MplsTunnelEntry ::= SEQUENCE { mplsTunnelName OCTET STRING, mplsTunnelApsType INTEGER, mplsTunnelRowStatus RowStatus, mplsTunnelPrimaryLspPe OCTET STRING, mplsTunnelSecondaryLspPe OCTET STRING, mplsTunnelDescription OCTET STRING, mplsTunnelSelectedLspPe OCTET STRING, mplsTunnelG8131Mode INTEGER, mplsTunnelG8131WTRTimer Integer32, mplsTunnelG8131HoldOffTimer Integer32, mplsTunnelG8131Action INTEGER, mplsTunnelG8131WorkingLSP OCTET STRING, mplsTunnelG8131ProtectionLSP OCTET STRING, mplsTunnelG8131ActivePath INTEGER, mplsTunnelG8131WTRTimeLeft Integer32, mplsTunnelG8131HoldOffTimeLeft Integer32, mplsTunnelG8131DFOPState INTEGER, mplsTunnelG8131CurrentState INTEGER, mplsTunnelG8131LastState INTEGER, mplsTunnelG8131CurrentEvent INTEGER, mplsTunnelG8131FarEndLastEvent INTEGER, mplsTunnelG8131RequestSignal INTEGER } mplsTunnelName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for mpls tunnel." ::= { mplsTunnelEntry 1 } mplsTunnelApsType OBJECT-TYPE SYNTAX INTEGER { aps(1), non-aps(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "APS type for the tunnel." ::= { mplsTunnelEntry 2 } mplsTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsTunnelEntry 10 } mplsTunnelPrimaryLspPe OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary lsp-pe name of the mpls tunnel." ::= { mplsTunnelEntry 11 } mplsTunnelSecondaryLspPe OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary lsp-pe name of the mpls tunnel." ::= { mplsTunnelEntry 12 } mplsTunnelDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this MPLS tunnel. Only less than 20 octets is accepted." ::= { mplsTunnelEntry 13 } mplsTunnelSelectedLspPe OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Selected lsp-pe name of the mpls tunnel." ::= { mplsTunnelEntry 25 } mplsTunnelG8131Mode OBJECT-TYPE SYNTAX INTEGER { revertive(1), non-revertive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 mode for the mpls tunnel." ::= { mplsTunnelEntry 30 } mplsTunnelG8131WTRTimer OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 wait-to-restore timer value for the mpls tunnel, in minutes." DEFVAL {5} ::= { mplsTunnelEntry 31 } mplsTunnelG8131HoldOffTimer OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 hold-off timer value for the mpls tunnel, steps of 100ms." DEFVAL {0} ::= { mplsTunnelEntry 32 } mplsTunnelG8131Action OBJECT-TYPE SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2), manual-switch-to-protection(3), lockout(4), exercise(5), clear(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 actions for the mpls tunnel." ::= { mplsTunnelEntry 33 } mplsTunnelG8131WorkingLSP OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 working lsp for the mpls tunnel." ::= { mplsTunnelEntry 40 } mplsTunnelG8131ProtectionLSP OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 protection lsp for the mpls tunnel." ::= { mplsTunnelEntry 41 } mplsTunnelG8131ActivePath OBJECT-TYPE SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 active path for the mpls tunnel." ::= { mplsTunnelEntry 42 } mplsTunnelG8131WTRTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 wait-to-restore timer of the mpls tunnel." ::= { mplsTunnelEntry 43 } mplsTunnelG8131HoldOffTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 hold-off timer of the mpls tunnel." ::= { mplsTunnelEntry 44 } mplsTunnelG8131DFOPState OBJECT-TYPE SYNTAX INTEGER { not-in-defect-mode(1), b-bit-mismatch-defect(2), r-bit-mismatch-defect(3), invalid-request-state(4), aps-recv-on-working-entity(5), aps-pdu-not-recv-after-state-change(6), a-bit-mismatch-defect(7), d-bit-mismatch-defect(8), t-bit-mismatch-defect(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 DFOP state of the mpls tunnel." ::= { mplsTunnelEntry 45 } mplsTunnelG8131CurrentState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current state of the mpls tunnel." ::= { mplsTunnelEntry 46 } mplsTunnelG8131LastState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 last state of the mpls tunnel." ::= { mplsTunnelEntry 47 } mplsTunnelG8131CurrentEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current event of the mpls tunnel." ::= { mplsTunnelEntry 48 } mplsTunnelG8131FarEndLastEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 far end last event of the mpls tunnel." ::= { mplsTunnelEntry 49 } mplsTunnelG8131RequestSignal OBJECT-TYPE SYNTAX INTEGER { normal(1), null(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 request signal of the mpls tunnel." ::= { mplsTunnelEntry 50 } mplsPwSPeTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPwSPeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls pw s-pe instances." ::= { mpls 23 } mplsPwSPeEntry OBJECT-TYPE SYNTAX MplsPwSPeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsPwSPeTable." INDEX { mplsPwSPeName } ::= { mplsPwSPeTable 1 } MplsPwSPeEntry ::= SEQUENCE { mplsPwSPeName OCTET STRING, mplsPwSPeRowStatus RowStatus, mplsPwSPeOAMMegId OCTET STRING, mplsPwSPeOAMMegIdIcc Integer32, mplsPwSPeOAMMipState INTEGER, mplsPwSPeOAMMegLevel Integer32, mplsPwSPeDescription OCTET STRING, mplsPwSpeStats INTEGER } mplsPwSPeName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS pw s-pe." ::= { mplsPwSPeEntry 1 } mplsPwSPeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsPwSPeEntry 10 } mplsPwSPeOAMMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "MEG ID of the pw spe." ::= { mplsPwSPeEntry 11 } mplsPwSPeOAMMegIdIcc OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ICC length of MEG ID." DEFVAL { 6 } ::= { mplsPwSPeEntry 12 } mplsPwSPeOAMMipState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "MIP state of the pw spe." DEFVAL { disable } ::= { mplsPwSPeEntry 13 } mplsPwSPeOAMMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "OAM level." DEFVAL { 7 } ::= { mplsPwSPeEntry 14 } mplsPwSPeDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this S-PE type PW. Only less than 20 octets is accepted." ::= { mplsPwSPeEntry 15 } mplsPwSpeStats OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set statistics for mpls pw s-pe. The meanings of the values are: enable(1) - enable statistics; disable(2) - disable statistics;" DEFVAL { 2 } ::= { mplsPwSPeEntry 16 } mplsPwSPeEastTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPwSPeEastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of east configuration of all mpls pw s-pe instances." ::= { mpls 24 } mplsPwSPeEastEntry OBJECT-TYPE SYNTAX MplsPwSPeEastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsPwSPeEastTable." INDEX { mplsPwSPeEastPwName} ::= { mplsPwSPeEastTable 1 } MplsPwSPeEastEntry ::= SEQUENCE { mplsPwSPeEastPwName OCTET STRING, mplsPwSPeEastInlabel Integer32, mplsPwSPeEastOutlabel Integer32, mplsPwSPeEastTunnelName OCTET STRING, mplsPwSPeEastCtrlWord INTEGER, mplsPwSPeEastRowStatus RowStatus, mplsPwSPeEastState INTEGER, mplsPwSPeEastIngressPkts Counter64, mplsPwSPeEastIngressbytes Counter64, mplsPwSPeEastEgressPkts Counter64, mplsPwSPeEastEgressBytes Counter64 } mplsPwSPeEastPwName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS pw s-pe." ::= { mplsPwSPeEastEntry 1 } mplsPwSPeEastInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "East incoming label of the MPLS pw s-pe." ::= { mplsPwSPeEastEntry 2 } mplsPwSPeEastOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "East outgoing label of the MPLS pw s-pe." ::= { mplsPwSPeEastEntry 3 } mplsPwSPeEastTunnelName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS tunnel name for the MPLS pw s-pe." ::= { mplsPwSPeEastEntry 4 } mplsPwSPeEastCtrlWord OBJECT-TYPE SYNTAX INTEGER {control-word(1), no-control-word(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls pw spe east control-word." ::= { mplsPwSPeEastEntry 5 } mplsPwSPeEastRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsPwSPeEastEntry 10 } mplsPwSPeEastState OBJECT-TYPE SYNTAX INTEGER {up(1), down(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls pw spe east. The meanings of the values are: up(1) - the state is up; down(2) - the state is down;" ::= { mplsPwSPeEastEntry 11 } mplsPwSPeEastIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packets number of pw s-pe east." ::= { mplsPwSPeEastEntry 20 } mplsPwSPeEastIngressbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of pw s-pe east." ::= { mplsPwSPeEastEntry 21 } mplsPwSPeEastEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packets number of pw s-pe east." ::= { mplsPwSPeEastEntry 22 } mplsPwSPeEastEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of pw s-pe east." ::= { mplsPwSPeEastEntry 23 } mplsPwSPeWestTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPwSPeWestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of west configuration of all mpls pw s-pe instances." ::= { mpls 25 } mplsPwSPeWestEntry OBJECT-TYPE SYNTAX MplsPwSPeWestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsPwSPeWestTable." INDEX { mplsPwSPeWestPwName} ::= { mplsPwSPeWestTable 1 } MplsPwSPeWestEntry ::= SEQUENCE { mplsPwSPeWestPwName OCTET STRING, mplsPwSPeWestInlabel Integer32, mplsPwSPeWestOutlabel Integer32, mplsPwSPeWestTunnelName OCTET STRING, mplsPwSPeWestCtrlWord INTEGER, mplsPwSPeWestRowStatus RowStatus, mplsPwSPeWestState INTEGER, mplsPwSPeWestIngressPkts Counter64, mplsPwSPeWestIngressbytes Counter64, mplsPwSPeWestEgressPkts Counter64, mplsPwSPeWestEgressBytes Counter64 } mplsPwSPeWestPwName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS pw s-pe." ::= { mplsPwSPeWestEntry 1 } mplsPwSPeWestInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "West incoming label of the MPLS pw s-pe." ::= { mplsPwSPeWestEntry 2 } mplsPwSPeWestOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "West outgoing label of the MPLS pw s-pe." ::= { mplsPwSPeWestEntry 3 } mplsPwSPeWestTunnelName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS tunnel name for the MPLS pw s-pe." ::= { mplsPwSPeWestEntry 4 } mplsPwSPeWestCtrlWord OBJECT-TYPE SYNTAX INTEGER {control-word(1), no-control-word(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls pw spe west control-word." ::= { mplsPwSPeWestEntry 5 } mplsPwSPeWestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsPwSPeWestEntry 10 } mplsPwSPeWestState OBJECT-TYPE SYNTAX INTEGER {up(1), down(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the mpls pw spe west. The meanings of the values are: up(1) - the state is up; down(2) - the state is down;" ::= { mplsPwSPeWestEntry 11 } mplsPwSPeWestIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packets number of pw s-pe west." ::= { mplsPwSPeWestEntry 20 } mplsPwSPeWestIngressbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of pw s-pe west." ::= { mplsPwSPeWestEntry 21 } mplsPwSPeWestEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packets number of pw s-pe west." ::= { mplsPwSPeWestEntry 22 } mplsPwSPeWestEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of pw s-pe west." ::= { mplsPwSPeWestEntry 23 } mplsVplsStaticFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsStaticFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls static fdb table." ::= { mpls 26 } mplsVplsStaticFdbEntry OBJECT-TYPE SYNTAX MplsVplsStaticFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPLS static fdb entries." INDEX { mplsVplsStaticFdbVplsId, mplsVplsStaticFdbMacAddr} ::= { mplsVplsStaticFdbTable 1 } MplsVplsStaticFdbEntry ::= SEQUENCE { mplsVplsStaticFdbVplsId Integer32, mplsVplsStaticFdbMacAddr MacAddress, mplsVplsStaticFdbType INTEGER, mplsVplsStaticFdbIfName OCTET STRING, mplsVplsStaticFdbPeerIp IpAddress, mplsVplsStaticFdbTPPeerName OCTET STRING, mplsVplsStaticFdbRowStatus RowStatus } mplsVplsStaticFdbVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsStaticFdbEntry 1 } mplsVplsStaticFdbMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac address of the fdb entry." ::= { mplsVplsStaticFdbEntry 2 } mplsVplsStaticFdbType OBJECT-TYPE SYNTAX INTEGER {forward(1),discard(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set static fdb type. When mplsVplsStaticFdbType is set to discard, mplsVplsStaticFdbIfName and mplsVplsStaticFdbPeerIp are invalid. The meanings of the values are: forward(1) - Forwarding entry; discard(2) - Discard entry;" DEFVAL { discard } ::= { mplsVplsStaticFdbEntry 3 } mplsVplsStaticFdbIfName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going interface of the VPLS fdb entry." ::= { mplsVplsStaticFdbEntry 4 } mplsVplsStaticFdbPeerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going peer IPV4 address of the VPLS fdb entry." ::= { mplsVplsStaticFdbEntry 5 } mplsVplsStaticFdbTPPeerName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going tp-peer of the VPLS fdb entry." ::= { mplsVplsStaticFdbEntry 6 } mplsVplsStaticFdbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsVplsStaticFdbEntry 10 } mplsStaticFtnTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsStaticFtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS static ftn table." ::= { mpls 27 } mplsStaticFtnEntry OBJECT-TYPE SYNTAX MplsStaticFtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS static ftn entries." INDEX { mplsStaticFtnFecPrefix, mplsStaticFtnFecPrefixLen, mplsStaticFtnNexthop } ::= { mplsStaticFtnTable 1 } MplsStaticFtnEntry ::= SEQUENCE { mplsStaticFtnFecPrefix IpAddress, mplsStaticFtnFecPrefixLen Integer32, mplsStaticFtnNexthop IpAddress, mplsStaticFtnOutlabel Integer32, mplsStaticFtnRowStatus RowStatus } mplsStaticFtnFecPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "FEC prefix." ::= { mplsStaticFtnEntry 1 } mplsStaticFtnFecPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "FEC prefix length." ::= { mplsStaticFtnEntry 2 } mplsStaticFtnNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Nexthop IPV4 address of the FEC." ::= { mplsStaticFtnEntry 3 } mplsStaticFtnOutlabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going label for the FEC" ::= { mplsStaticFtnEntry 4 } mplsStaticFtnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsStaticFtnEntry 10 } mplsFtnDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsFtnDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS ftn database table." ::= { mpls 28 } mplsFtnDatabaseEntry OBJECT-TYPE SYNTAX MplsFtnDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS ftn database entries." INDEX { mplsFtnDatabaseIndex } ::= { mplsFtnDatabaseTable 1 } MplsFtnDatabaseEntry ::= SEQUENCE { mplsFtnDatabaseIndex Integer32, mplsFtnDatabaseFecPrefix IpAddress, mplsFtnDatabaseFecPrefixLen Integer32, mplsFtnDatabaseOutlabel Integer32, mplsFtnDatabaseNexthop IpAddress, mplsFtnDatabaseOutInterface OCTET STRING, mplsFtnDatabaseState INTEGER } mplsFtnDatabaseIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "FEC prefix." ::= { mplsFtnDatabaseEntry 1 } mplsFtnDatabaseFecPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "FEC prefix." ::= { mplsFtnDatabaseEntry 2 } mplsFtnDatabaseFecPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "FEC prefix length." ::= { mplsFtnDatabaseEntry 3 } mplsFtnDatabaseOutlabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going label for the FEC" ::= { mplsFtnDatabaseEntry 4 } mplsFtnDatabaseNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Nexthop IPV4 address of the FEC." ::= { mplsFtnDatabaseEntry 5 } mplsFtnDatabaseOutInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going interface for the FEC." ::= { mplsFtnDatabaseEntry 6 } mplsFtnDatabaseState OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the FTN entry.The meanings of the values are: active(1) - the entry is active; inactive(2) - the entry is inactive;" ::= { mplsFtnDatabaseEntry 7 } mplsStaticIlmTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsStaticIlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS static ilm table." ::= { mpls 29 } mplsStaticIlmEntry OBJECT-TYPE SYNTAX MplsStaticIlmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS static ilm entries." INDEX { mplsStaticIlmInlabel } ::= { mplsStaticIlmTable 1 } MplsStaticIlmEntry ::= SEQUENCE { mplsStaticIlmInlabel Integer32, mplsStaticIlmOpcode INTEGER, mplsStaticIlmNexthop IpAddress, mplsStaticIlmOutlabel Integer32, mplsStaticIlmRowStatus RowStatus } mplsStaticIlmInlabel OBJECT-TYPE SYNTAX Integer32 (16..1048575) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Incoming label." ::= { mplsStaticIlmEntry 1 } mplsStaticIlmOpcode OBJECT-TYPE SYNTAX INTEGER {swap(1), pop(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The opcode of the ilm entry.The meanings of the values are: swap(1) - swap incoming label; pop(2) - pop incoming label." ::= { mplsStaticIlmEntry 2 } mplsStaticIlmNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Nexthop IPV4 address of the ILM." ::= { mplsStaticIlmEntry 3 } mplsStaticIlmOutlabel OBJECT-TYPE SYNTAX Integer32 (0|3|16..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "Out-going label for the ILM." ::= { mplsStaticIlmEntry 4 } mplsStaticIlmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { mplsStaticIlmEntry 10 } mplsIlmDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsIlmDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS ilm database table." ::= { mpls 30 } mplsIlmDatabaseEntry OBJECT-TYPE SYNTAX MplsIlmDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS ilm database entries." INDEX { mplsIlmDatabaseIndex } ::= { mplsIlmDatabaseTable 1 } MplsIlmDatabaseEntry ::= SEQUENCE { mplsIlmDatabaseIndex Integer32, mplsIlmDatabaseFecPrefix IpAddress, mplsIlmDatabaseFecPrefixLen Integer32, mplsIlmDatabaseInlabel Integer32, mplsIlmDatabaseOutlabel Integer32, mplsIlmDatabaseNexthop IpAddress, mplsIlmDatabaseOutInterface OCTET STRING, mplsIlmDatabaseState INTEGER, mplsIlmDatabaseNexthopMac MacAddress } mplsIlmDatabaseIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the ILM entry." ::= { mplsIlmDatabaseEntry 1 } mplsIlmDatabaseFecPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "FEC prefix." ::= { mplsIlmDatabaseEntry 2 } mplsIlmDatabaseFecPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "FEC prefix length." ::= { mplsIlmDatabaseEntry 3 } mplsIlmDatabaseInlabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incoming label for the FEC." ::= { mplsIlmDatabaseEntry 4 } mplsIlmDatabaseOutlabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going label for the FEC." ::= { mplsIlmDatabaseEntry 5 } mplsIlmDatabaseNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Nexthop IPV4 address of the FEC." ::= { mplsIlmDatabaseEntry 6 } mplsIlmDatabaseOutInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going interface for the ilm entry." ::= { mplsIlmDatabaseEntry 7 } mplsIlmDatabaseState OBJECT-TYPE SYNTAX INTEGER {active(1),inactive(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the ILM entry.The meanings of the values are: active(1) - the entry is active; inactive(2) - the entry is inactive;" ::= { mplsIlmDatabaseEntry 8 } mplsIlmDatabaseNexthopMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Nexthop mac address of the FEC." ::= { mplsIlmDatabaseEntry 11 } mplsPwTpeTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPwTpeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls pw-tpe instances." ::= { mpls 31 } mplsPwTpeEntry OBJECT-TYPE SYNTAX MplsPwTpeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsPwTpeTable." INDEX { mplsPwTpeName} ::= { mplsPwTpeTable 1 } MplsPwTpeEntry ::= SEQUENCE { mplsPwTpeName OCTET STRING, mplsPwTpeRowStatus RowStatus, mplsPwTpeDescription OCTET STRING, mplsPwTpeOAMMegLevel Integer32, mplsPwTpeOAMMegId OCTET STRING, mplsPwTpeOAMMegIdIcc Integer32, mplsPwTpeOAMMepId Integer32, mplsPwTpeOAMMepInterval INTEGER, mplsPwTpeOAMMepExp Integer32, mplsPwTpeOAMRMepId Integer32, mplsPwTpeOAMCCState INTEGER, mplsPwTpeOAMEventCacheSize Integer32, mplsPwTpeOAM1dmCacheSize Integer32, mplsPwTpeOAMAisClientSupress INTEGER, mplsPwTpeOAMLck INTEGER, mplsPwTpeOAMEvtLOC INTEGER, mplsPwTpeOAMEvtUMP INTEGER, mplsPwTpeOAMEvtUIN INTEGER, mplsPwTpeOAMEvtUMG INTEGER, mplsPwTpeOAMEvtULV INTEGER, mplsPwTpeOAMEvtW1ST INTEGER, mplsPwTpeOAMEvtRDIR INTEGER, mplsPwTpeOAMEvtRDIT INTEGER, mplsPwTpeOAMEvtAISR INTEGER, mplsPwTpeOAMEvtAIST INTEGER, mplsPwTpeOAMEvtAISD INTEGER, mplsPwTpeOAMEvtLCKR INTEGER, mplsPwTpeOAMEvtLCKT INTEGER, mplsPwTpeOAMEvtLCKD INTEGER, mplsPwTpeOAMEvtCRC INTEGER, mplsPwTpeOAMState INTEGER, mplsPwTpeIngressPkts Counter64, mplsPwTpeIngressBytes Counter64, mplsPwTpeEgressPkts Counter64, mplsPwTpeEgressBytes Counter64, mplsPwTpeStats INTEGER, mplsPwTpeBandwidth Integer32, mplsPwTpeOAMLmDualExp Integer32, mplsPwTpeOAMLmDualStatInterval Integer32, mplsPwTpeOAMLmDualCacheSize Integer32, mplsPwTpeOAMLmSingleExp Integer32, mplsPwTpeOAMLmSingleInterval INTEGER, mplsPwTpeOAMLmSingleCacheSize Integer32, mplsPwTpeOAMLmEnableState INTEGER, mplsPwTpeOAMLmLocalLossThreshold Integer32, mplsPwTpeOAMLmRemoteLossThreshold Integer32, mplsPwTpeOAMLmSingleRxCount Integer32, mplsPwTpeOAMLmSingleTxCount Integer32, mplsPwTpeOAMLmSingleSuccessRate Integer32, mplsPwTpeOAMLmSingleStartTime OCTET STRING, mplsPwTpeOAMLmSingleEndTime OCTET STRING } mplsPwTpeName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Lsp-pe." ::= { mplsPwTpeEntry 1 } mplsPwTpeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsPwTpeEntry 10 } mplsPwTpeDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this T-PE type PW. Only less than 20 octets is accepted." ::= { mplsPwTpeEntry 11 } mplsPwTpeOAMMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "OAM level." DEFVAL { 7 } ::= { mplsPwTpeEntry 20 } mplsPwTpeOAMMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "MEG ID of the lsp-pe." ::= { mplsPwTpeEntry 21 } mplsPwTpeOAMMegIdIcc OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ICC length of MEG ID." DEFVAL { 6 } ::= { mplsPwTpeEntry 22 } mplsPwTpeOAMMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "MEP ID." ::= { mplsPwTpeEntry 23 } mplsPwTpeOAMMepInterval OBJECT-TYPE SYNTAX INTEGER { three-point-three-ms(1), ten-ms(2), one-hundred-ms(3), one-sec(4), ten-sec(5), one-min(6), ten-min(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "MEP Interval." ::= { mplsPwTpeEntry 24 } mplsPwTpeOAMMepExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "EXP value, default is 7." DEFVAL { 7 } ::= { mplsPwTpeEntry 25 } mplsPwTpeOAMRMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP ID." ::= { mplsPwTpeEntry 26 } mplsPwTpeOAMCCState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CC state." DEFVAL { disable } ::= { mplsPwTpeEntry 27 } mplsPwTpeOAMEventCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Event entry cache size." DEFVAL { 8 } ::= { mplsPwTpeEntry 28 } mplsPwTpeOAM1dmCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "1dm entry cache size." DEFVAL { 8 } ::= { mplsPwTpeEntry 29 } mplsPwTpeOAMAisClientSupress OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "AIS client supress state." DEFVAL { disable } ::= { mplsPwTpeEntry 30 } mplsPwTpeOAMLck OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable pw-tpe lock." DEFVAL { disable } ::= { mplsPwTpeEntry 31 } mplsPwTpeOAMEvtLOC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Loc state." DEFVAL { disable } ::= { mplsPwTpeEntry 32 } mplsPwTpeOAMEvtUMP OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp RMEPID state." DEFVAL { disable } ::= { mplsPwTpeEntry 33 } mplsPwTpeOAMEvtUIN OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp interval state." DEFVAL { disable } ::= { mplsPwTpeEntry 34 } mplsPwTpeOAMEvtUMG OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp MEGID state." DEFVAL { disable } ::= { mplsPwTpeEntry 35 } mplsPwTpeOAMEvtULV OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp Level state." DEFVAL { disable } ::= { mplsPwTpeEntry 36 } mplsPwTpeOAMEvtW1ST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Wait 1st CCM state." DEFVAL { disable } ::= { mplsPwTpeEntry 37 } mplsPwTpeOAMEvtRDIR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 38 } mplsPwTpeOAMEvtRDIT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI TX state." DEFVAL { disable } ::= { mplsPwTpeEntry 39 } mplsPwTpeOAMEvtAISR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 40 } mplsPwTpeOAMEvtAIST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 41 } mplsPwTpeOAMEvtAISD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 42 } mplsPwTpeOAMEvtLCKR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 43 } mplsPwTpeOAMEvtLCKT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 44 } mplsPwTpeOAMEvtLCKD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 45 } mplsPwTpeOAMEvtCRC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "CRC RX state." DEFVAL { disable } ::= { mplsPwTpeEntry 46 } mplsPwTpeOAMState OBJECT-TYPE SYNTAX INTEGER {init(0), fail(1), ok(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "oam-y1731 Rmep state." ::= { mplsPwTpeEntry 50 } mplsPwTpeIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packtes number of mpls pw-tpe." ::= { mplsPwTpeEntry 51 } mplsPwTpeIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of mpls pw-tpe." ::= { mplsPwTpeEntry 52 } mplsPwTpeEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packtes number of mpls pw-tpe." ::= { mplsPwTpeEntry 53 } mplsPwTpeEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of mpls pw-tpe." ::= { mplsPwTpeEntry 54 } mplsPwTpeStats OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Pw-tpe statistics." DEFVAL { disable } ::= { mplsPwTpeEntry 55 } mplsPwTpeBandwidth OBJECT-TYPE SYNTAX Integer32 (-1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "pw-tpe bandwidth in kbps. -1 means no limitation" ::= { mplsPwTpeEntry 56 } mplsPwTpeOAMLmDualExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsPwTpeEntry 61 } mplsPwTpeOAMLmDualStatInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment interval value." DEFVAL { 1 } ::= { mplsPwTpeEntry 62 } mplsPwTpeOAMLmDualCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsPwTpeEntry 63 } mplsPwTpeOAMLmSingleExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsPwTpeEntry 66 } mplsPwTpeOAMLmSingleInterval OBJECT-TYPE SYNTAX INTEGER { one-hundred-ms(1), one-sec(2), ten-sec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config Interval." ::= { mplsPwTpeEntry 67 } mplsPwTpeOAMLmSingleCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsPwTpeEntry 68 } mplsPwTpeOAMLmEnableState OBJECT-TYPE SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable oam-y1731 loss measurment." DEFVAL { disable } ::= { mplsPwTpeEntry 70 } mplsPwTpeOAMLmLocalLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsPwTpeEntry 71 } mplsPwTpeOAMLmRemoteLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsPwTpeEntry 72 } mplsPwTpeOAMLmSingleRxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Rx count." ::= { mplsPwTpeEntry 73 } mplsPwTpeOAMLmSingleTxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Tx count." ::= { mplsPwTpeEntry 74 } mplsPwTpeOAMLmSingleSuccessRate OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended success rate." ::= { mplsPwTpeEntry 75 } mplsPwTpeOAMLmSingleStartTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended start time." ::= { mplsPwTpeEntry 76 } mplsPwTpeOAMLmSingleEndTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended end time." ::= { mplsPwTpeEntry 77 } mplsPwTpeConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsPwTpeConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of configuration of all mpls pw-tpe instances." ::= { mpls 32 } mplsPwTpeConfEntry OBJECT-TYPE SYNTAX MplsPwTpeConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsPwTpeConfTable." INDEX { mplsPwTpeName} ::= { mplsPwTpeConfTable 1 } MplsPwTpeConfEntry ::= SEQUENCE { mplsPwTpeConfInlabel Integer32, mplsPwTpeConfOutlabel Integer32, mplsPwTpeConfPwMode INTEGER, mplsPwTpeConfTunnel OCTET STRING, mplsPwTpeConfRowStatus RowStatus } mplsPwTpeConfInlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "Incoming label of the t-pe." ::= { mplsPwTpeConfEntry 1 } mplsPwTpeConfOutlabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "Outgoing label of the t-pe." ::= { mplsPwTpeConfEntry 2 } mplsPwTpeConfPwMode OBJECT-TYPE SYNTAX INTEGER { raw(1), tagged(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pw mode of the t-pe." DEFVAL { raw } ::= { mplsPwTpeConfEntry 3 } mplsPwTpeConfTunnel OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Tunnel name." ::= { mplsPwTpeConfEntry 4 } mplsPwTpeConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsPwTpeConfEntry 10 } mplsTPVpwsTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTPVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specify an MPLS Layer-2 Virtual Circuit." ::= { mpls 33 } mplsTPVpwsEntry OBJECT-TYPE SYNTAX MplsTPVpwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTPVpwsTable." INDEX { mplsTPVpwsVcId} ::= { mplsTPVpwsTable 1 } MplsTPVpwsEntry ::= SEQUENCE { mplsTPVpwsVcId Integer32, mplsTPVpwsVcName OCTET STRING, mplsTPVpwsApsType INTEGER, mplsTPVpwsVlanOperation INTEGER, mplsTPVpwsRowStatus RowStatus, mplsTPVpwsPrimaryPw OCTET STRING, mplsTPVpwsSecondaryPw OCTET STRING, mplsTPVpwsSelectedPw OCTET STRING, mplsTPVpwsDescription OCTET STRING, mplsTPAcVpwsIngressPkts Counter64, mplsTPAcVpwsIngressbytes Counter64, mplsTPAcVpwsEgressPkts Counter64, mplsTPAcVpwsEgressBytes Counter64, mplsTPVpwsG8131Mode INTEGER, mplsTPVpwsG8131WTRTimer Integer32, mplsTPVpwsG8131HoldOffTimer Integer32, mplsTPVpwsG8131Action INTEGER, mplsTPVpwsG8131WorkingPw OCTET STRING, mplsTPVpwsG8131ProtectionPw OCTET STRING, mplsTPVpwsG8131ActivePath INTEGER, mplsTPVpwsG8131WTRTimeLeft Integer32, mplsTPVpwsG8131HoldOffTimeLeft Integer32, mplsTPVpwsG8131DFOPState INTEGER, mplsTPVpwsG8131CurrentState INTEGER, mplsTPVpwsG8131LastState INTEGER, mplsTPVpwsG8131CurrentEvent INTEGER, mplsTPVpwsG8131FarEndLastEvent INTEGER, mplsTPVpwsG8131RequestSignal INTEGER, mplsTPVpwsOAMCsfInterval Integer32, mplsTPVpwsOAMCSFRxDown INTEGER, mplsTPVpwsOAMCSFRxRelay INTEGER, mplsTPVpwsOAMCSFRxRelayMdName OCTET STRING, mplsTPVpwsOAMCSFRxRelayMaVid Integer32, mplsTPVpwsOAMCSFRxRelayMepId Integer32 } mplsTPVpwsVcId OBJECT-TYPE SYNTAX Integer32(1..424967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Layer-2 Virtual Circuit." ::= { mplsTPVpwsEntry 1 } mplsTPVpwsVcName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifying string for mpls-tp vpws. Only 20 octets is accepted.." ::= { mplsTPVpwsEntry 2 } mplsTPVpwsApsType OBJECT-TYPE SYNTAX INTEGER { aps(1), non-aps(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set aps type for mpls-tp vpws." DEFVAL { 2 } ::= { mplsTPVpwsEntry 3 } mplsTPVpwsVlanOperation OBJECT-TYPE SYNTAX INTEGER { ac-vlan-operation(1), no-ac-vlan-operation(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set enable ac vlan operation for mpls-tp vpws." DEFVAL { 2 } ::= { mplsTPVpwsEntry 4 } mplsTPVpwsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTPVpwsEntry 10 } mplsTPVpwsPrimaryPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary pw tpe name of the mpls-tp vpws." ::= { mplsTPVpwsEntry 11 } mplsTPVpwsSecondaryPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary pw tpe name of the mpls-tp vpws. Can not set secondary pw for non-aps type." ::= { mplsTPVpwsEntry 12 } mplsTPVpwsSelectedPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary pw tpe name of the mpls-tp vpws. Can not set secondary pw for non-aps type." ::= { mplsTPVpwsEntry 13 } -- mplsTPVpwsIngressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress packets number of mpls vpws." -- ::= { mplsTPVpwsEntry 14 } -- -- mplsTPVpwsIngressbytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress bytes number of mpls vpws." -- ::= { mplsTPVpwsEntry 15 } -- -- mplsTPVpwsEgressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress packets number of mpls vpws." -- ::= { mplsTPVpwsEntry 16 } -- -- mplsTPVpwsEgressBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress bytes number of mpls vpws." -- ::= { mplsTPVpwsEntry 17 } mplsTPVpwsDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this instance of MPLS based VPWS. Only less than 20 octets is accepted." ::= { mplsTPVpwsEntry 18 } -- mplsTPVpwsStats OBJECT-TYPE -- SYNTAX INTEGER {enable(1),disable(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Set statistics for mpls-tp vpws. The meanings of the values are: -- enable(1) - enable statistics; -- disable(2) - disable statistics;" -- DEFVAL { 2 } -- ::= { mplsTPVpwsEntry 19 } mplsTPAcVpwsIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress packets number of mpls ac vpws." ::= { mplsTPVpwsEntry 21 } mplsTPAcVpwsIngressbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress bytes number of mpls ac vpws." ::= { mplsTPVpwsEntry 22 } mplsTPAcVpwsEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress packets number of mpls ac vpws." ::= { mplsTPVpwsEntry 23 } mplsTPAcVpwsEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Egress bytes number of mpls ac vpws." ::= { mplsTPVpwsEntry 24 } mplsTPVpwsG8131Mode OBJECT-TYPE SYNTAX INTEGER { revertive(1), non-revertive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 mode for the mpls tp vpws." ::= { mplsTPVpwsEntry 30 } mplsTPVpwsG8131WTRTimer OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 wait-to-restore timer value for the mpls tp vpws, in minutes." DEFVAL {5} ::= { mplsTPVpwsEntry 31 } mplsTPVpwsG8131HoldOffTimer OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 hold-off timer value for the mpls tp vpws, steps of 100ms." DEFVAL {0} ::= { mplsTPVpwsEntry 32 } mplsTPVpwsG8131Action OBJECT-TYPE SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2), manual-switch-to-protection(3), lockout(4), exercise(5), clear(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 actions for the mpls tp vpws." ::= { mplsTPVpwsEntry 33 } mplsTPVpwsG8131WorkingPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 working pw for the mpls tp vpws." ::= { mplsTPVpwsEntry 40 } mplsTPVpwsG8131ProtectionPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 protection pw for the mpls tp vpws." ::= { mplsTPVpwsEntry 41 } mplsTPVpwsG8131ActivePath OBJECT-TYPE SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 active path for the mpls tp vpws." ::= { mplsTPVpwsEntry 42 } mplsTPVpwsG8131WTRTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 wait-to-restore timer of the mpls tp vpws." ::= { mplsTPVpwsEntry 43 } mplsTPVpwsG8131HoldOffTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 hold-off timer of the mpls tp vpws." ::= { mplsTPVpwsEntry 44 } mplsTPVpwsG8131DFOPState OBJECT-TYPE SYNTAX INTEGER { not-in-defect-mode(1), b-bit-mismatch-defect(2), r-bit-mismatch-defect(3), invalid-request-state(4), aps-recv-on-working-entity(5), aps-pdu-not-recv-after-state-change(6), a-bit-mismatch-defect(7), d-bit-mismatch-defect(8), t-bit-mismatch-defect(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 DFOP state of the mpls tp vpws." ::= { mplsTPVpwsEntry 45 } mplsTPVpwsG8131CurrentState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current state of the mpls tp vpws." ::= { mplsTPVpwsEntry 46 } mplsTPVpwsG8131LastState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 last state of the mpls tp vpws." ::= { mplsTPVpwsEntry 47 } mplsTPVpwsG8131CurrentEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current event of the mpls tp vpws." ::= { mplsTPVpwsEntry 48 } mplsTPVpwsG8131FarEndLastEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 far end last event of the mpls tp vpws." ::= { mplsTPVpwsEntry 49 } mplsTPVpwsG8131RequestSignal OBJECT-TYPE SYNTAX INTEGER { normal(1), null(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 request signal of the mpls tp vpws." ::= { mplsTPVpwsEntry 50 } mplsTPVpwsOAMCsfInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval of CSF PDU. 0:no oam-y1731 csf server enable." ::= { mplsTPVpwsEntry 60 } mplsTPVpwsOAMCSFRxDown OBJECT-TYPE SYNTAX INTEGER (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Action of Receiving CSF PDU AC Down. 0:no oam-y1731 csf rx-aciton down. 1:oam-y1731 csf rx-action down enable." ::= { mplsTPVpwsEntry 61 } mplsTPVpwsOAMCSFRxRelay OBJECT-TYPE SYNTAX INTEGER (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Action of Receiving CSF PDU AC relay to Eth-csf. 0:no oam-y1731 csf rx-aciton relay. 1:oam-y1731 csf rx-action relay enable." ::= { mplsTPVpwsEntry 62 } mplsTPVpwsOAMCSFRxRelayMdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..44)) MAX-ACCESS read-write STATUS current DESCRIPTION "MD Name for rx-action relay." ::= { mplsTPVpwsEntry 63 } mplsTPVpwsOAMCSFRxRelayMaVid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "MA Vlan Id for rx-action relay." ::= { mplsTPVpwsEntry 64 } mplsTPVpwsOAMCSFRxRelayMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Mep Id for rx-action relay." ::= { mplsTPVpwsEntry 65 } mplsVplsTPPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsTPPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peers to VPLS domains." ::= { mpls 34 } mplsVplsTPPeerEntry OBJECT-TYPE SYNTAX MplsVplsTPPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsTPPeerTable." INDEX { mplsVplsTPPeerVplsId, mplsVplsTPPeerName} ::= { mplsVplsTPPeerTable 1 } MplsVplsTPPeerEntry ::= SEQUENCE { mplsVplsTPPeerVplsId Unsigned32, mplsVplsTPPeerName OCTET STRING, mplsVplsTPPeerApsType INTEGER, mplsVplsTPPeerPEType INTEGER, mplsVplsTPPeerRowStatus RowStatus, mplsVplsTPPeerPrimaryPw OCTET STRING, mplsVplsTPPeerSecondaryPw OCTET STRING, mplsVplsTPPeerSelectedPw OCTET STRING, mplsVplsTPPeerDescription OCTET STRING, mplsVplsTPPeerG8131Mode INTEGER, mplsVplsTPPeerG8131WTRTimer Integer32, mplsVplsTPPeerG8131HoldOffTimer Integer32, mplsVplsTPPeerG8131Action INTEGER, mplsVplsTPPeerG8131WorkingPw OCTET STRING, mplsVplsTPPeerG8131ProtectionPw OCTET STRING, mplsVplsTPPeerG8131ActivePath INTEGER, mplsVplsTPPeerG8131WTRTimeLeft Integer32, mplsVplsTPPeerG8131HoldOffTimeLeft Integer32, mplsVplsTPPeerG8131DFOPState INTEGER, mplsVplsTPPeerG8131CurrentState INTEGER, mplsVplsTPPeerG8131LastState INTEGER, mplsVplsTPPeerG8131CurrentEvent INTEGER, mplsVplsTPPeerG8131FarEndLastEvent INTEGER, mplsVplsTPPeerG8131RequestSignal INTEGER } mplsVplsTPPeerVplsId OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsTPPeerEntry 1 } mplsVplsTPPeerName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the peer node to be added." ::= { mplsVplsTPPeerEntry 2 } mplsVplsTPPeerApsType OBJECT-TYPE SYNTAX INTEGER { aps(1), non-aps(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "APS type of the vpls tp-peer." DEFVAL { non-aps } ::= { mplsVplsTPPeerEntry 3 } mplsVplsTPPeerPEType OBJECT-TYPE SYNTAX INTEGER {spe(1),upe(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Set PW type for mpls vpls tp-peer. The meanings of the values are: spe(1) - Superstarum PE; upe(2) - Underlayer PE;" DEFVAL { 1 } ::= { mplsVplsTPPeerEntry 4 } mplsVplsTPPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { mplsVplsTPPeerEntry 10 } mplsVplsTPPeerPrimaryPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary pw of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 11 } mplsVplsTPPeerSecondaryPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary pw of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 12 } mplsVplsTPPeerSelectedPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary pw tpe name of the vpls tp-peer. Can not set secondary pw for non-aps type." ::= { mplsVplsTPPeerEntry 13 } -- mplsVplsTPPeerIngressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress packets number of mpls vpls peer." -- ::= { mplsVplsTPPeerEntry 14 } -- -- mplsVplsTPPeerIngressbytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Ingress bytes number of mpls vpls peer." -- ::= { mplsVplsTPPeerEntry 15 } -- -- mplsVplsTPPeerEgressPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress packets number of mpls vpls peer." -- ::= { mplsVplsTPPeerEntry 16 } -- -- mplsVplsTPPeerEgressBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Egress bytes number of mpls vpls peer." -- ::= { mplsVplsTPPeerEntry 17 } mplsVplsTPPeerDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this VPLS peer. Only less than 20 octets is accepted." ::= { mplsVplsTPPeerEntry 18 } -- mplsVplsTPPeerStats OBJECT-TYPE -- SYNTAX INTEGER {enable(1),disable(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Set statistics for mpls vpls tp-peer. The meanings of the values are: -- enable(1) - enable statistics; -- disable(2) - disable statistics;" -- DEFVAL { 2 } -- ::= { mplsVplsTPPeerEntry 19 } mplsVplsTPPeerG8131Mode OBJECT-TYPE SYNTAX INTEGER { revertive(1), non-revertive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 mode for the vpls tp-peer." ::= { mplsVplsTPPeerEntry 30 } mplsVplsTPPeerG8131WTRTimer OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 wait-to-restore timer value for the vpls tp-peer, in minutes." DEFVAL {5} ::= { mplsVplsTPPeerEntry 31 } mplsVplsTPPeerG8131HoldOffTimer OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 hold-off timer value for the vpls tp-peer, steps of 100ms." DEFVAL {0} ::= { mplsVplsTPPeerEntry 32 } mplsVplsTPPeerG8131Action OBJECT-TYPE SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2), manual-switch-to-protection(3), lockout(4), exercise(5), clear(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "G8131 actions for the vpls tp-peer." ::= { mplsVplsTPPeerEntry 33 } mplsVplsTPPeerG8131WorkingPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 working pw for the vpls tp-peer." ::= { mplsVplsTPPeerEntry 40 } mplsVplsTPPeerG8131ProtectionPw OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 protection pw for the vpls tp-peer." ::= { mplsVplsTPPeerEntry 41 } mplsVplsTPPeerG8131ActivePath OBJECT-TYPE SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 active path for the vpls tp-peer." ::= { mplsVplsTPPeerEntry 42 } mplsVplsTPPeerG8131WTRTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 wait-to-restore timer of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 43 } mplsVplsTPPeerG8131HoldOffTimeLeft OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Left time of G8131 hold-off timer of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 44 } mplsVplsTPPeerG8131DFOPState OBJECT-TYPE SYNTAX INTEGER { not-in-defect-mode(1), b-bit-mismatch-defect(2), r-bit-mismatch-defect(3), invalid-request-state(4), aps-recv-on-working-entity(5), aps-pdu-not-recv-after-state-change(6), a-bit-mismatch-defect(7), d-bit-mismatch-defect(8), t-bit-mismatch-defect(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 DFOP state of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 45 } mplsVplsTPPeerG8131CurrentState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current state of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 46 } mplsVplsTPPeerG8131LastState OBJECT-TYPE SYNTAX INTEGER { no-request-working-active(0), no-request-protection-avtive(1), lockout-of-protection(2), forced-switch(3), signal-fail-on-working(4), signal-fail-on-protection(5), signal-degrade-on-working(6), signal-degrade-on-protection(7), manual-switch-to-protection(8), manual-switch-to-working(9), wait-to-restore(10), do-not-revert(11), exercise-on-working(12), exercise-on-protection(13), reverse-request-on-working(14), reverse-request-on-protection(15), none(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 last state of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 47 } mplsVplsTPPeerG8131CurrentEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 current event of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 48 } mplsVplsTPPeerG8131FarEndLastEvent OBJECT-TYPE SYNTAX INTEGER { local-lockout(0), local-force-switch(1), local-signal-fail-on-working(2), local-working-recover-from-signal-fail(3), local-signal-fail-on-protection(4), local-protection-recover-from-signal-fail(5), local-signal-degrade-on-working(6), local-working-recover-from-signal-degrade(7), local-signal-degrade-on-protection(8), local-protection-recover-from-signal-degrade(9), local-manual-switch-to-protection(10), local-manual-switch-to-working(11), local-clear(12), local-exercise(13), local-wtr-timer-expire(14), remote-lockout(15), remote-signal-fail-on-protection(16), remote-force-switch(17), remote-signal-fail-on-working(18), remote-signal-degrade-on-working(19), remote-signal-degrade-on-protection(20), remote-manual-switch-to-protection(21), remote-manual-switch-to-working(22), remote-wait-to-restore(23), remote-exercise-on-working(24), remote-exercise-on-protection(25), remote-reverse-request-on-working(26), remote-reverse-request-on-protection(27), remote-no-request-null(28), remote-no-request-normal(29), remote-do-not-revert(30), none(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 far end last event of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 49 } mplsVplsTPPeerG8131RequestSignal OBJECT-TYPE SYNTAX INTEGER { normal(1), null(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "G8131 request signal of the vpls tp-peer." ::= { mplsVplsTPPeerEntry 50 } -- mplsVplsTPPeerMacWithdrawRxPks OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Rx Mac-withdraw packets number of mpls peer." -- ::= { mplsVplsTPPeerEntry 51 } -- -- mplsVplsTPPeerMacWithdrawTxPks OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Tx Mac-withdraw packets number of mpls peer." -- ::= { mplsVplsTPPeerEntry 52 } -- -- mplsVplsTPPeerMacWithdrawAckRxPks OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Rx Mac-withdraw ACK packets number of mpls peer." -- ::= { mplsVplsTPPeerEntry 53 } -- -- mplsVplsTPPeerMacWithdrawAckTxPks OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Tx Mac-withdraw ACK packets number of mpls peer." -- ::= { mplsVplsTPPeerEntry 54 } mplsLspPeAisClientTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPeAisClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all clients bound to ais server(lsp-pe)." ::= { mpls 35 } mplsLspPeAisClientEntry OBJECT-TYPE SYNTAX MplsLspPeAisClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPeAisClientTable." INDEX { mplsLspPeName, lspPeAisClientBindType, lspPeAisClientBindName } ::= { mplsLspPeAisClientTable 1 } MplsLspPeAisClientEntry ::= SEQUENCE { lspPeAisClientBindType INTEGER, lspPeAisClientBindName OCTET STRING, lspPeAisClientRowStatus RowStatus } lspPeAisClientBindType OBJECT-TYPE SYNTAX INTEGER { lsp-p(1), pw-spe(2), pw-tpe(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for ais server(lsp-pe)." ::= { mplsLspPeAisClientEntry 1 } lspPeAisClientBindName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for ais server(lsp-pe)." ::= { mplsLspPeAisClientEntry 2 } lspPeAisClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsLspPeAisClientEntry 10 } mplsLspPeLckClientTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsLspPeLckClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all clients bound to ais server(lsp-pe)." ::= { mpls 36 } mplsLspPeLckClientEntry OBJECT-TYPE SYNTAX MplsLspPeLckClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsLspPeLckClientTable." INDEX { mplsLspPeName, mplsLspPeLckClientBindType, mplsLspPeLckClientBindName } ::= { mplsLspPeLckClientTable 1 } MplsLspPeLckClientEntry ::= SEQUENCE { mplsLspPeLckClientBindType INTEGER, mplsLspPeLckClientBindName OCTET STRING, mplsLspPeLckClientRowStatus RowStatus } mplsLspPeLckClientBindType OBJECT-TYPE SYNTAX INTEGER { lsp-p(1), pw-spe(2), pw-tpe(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for ais server(lsp-pe)." ::= { mplsLspPeLckClientEntry 1 } mplsLspPeLckClientBindName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for ais server(lsp-pe)." ::= { mplsLspPeLckClientEntry 2 } mplsLspPeLckClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsLspPeLckClientEntry 10 } mplsTpOAMSdReason OBJECT IDENTIFIER ::= { mpls 44 } sdReasonAisRx OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Ais rx." DEFVAL { disable } ::= { mplsTpOAMSdReason 1 } sdReasonAisDefect OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Ais defect." DEFVAL { enable } ::= { mplsTpOAMSdReason 2 } sdReasonCRC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CRC defect." DEFVAL { enable } ::= { mplsTpOAMSdReason 3 } mplsDCNManagementIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Managemenet ip address for MPLS DCN." ::= { mpls 45 } mplsTrustTopMostExp OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of mpls trust topmost-exp." ::= { mpls 46 } mplsTpChannelType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The channel type of mpls-tp oam-y1731." ::= { mpls 47 } mplsTpNodeId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The node id of the switch." ::= { mpls 48 } mplsTpOAMSfReason OBJECT IDENTIFIER ::= { mpls 49 } sfReasonAisDefect OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Ais defect." DEFVAL { disable } ::= { mplsTpOAMSfReason 1 } sfReasonLoc OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Loc." DEFVAL { enable } ::= { mplsTpOAMSfReason 2 } sfReasonRdiRx OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Recv Rdi." DEFVAL { disable } ::= { mplsTpOAMSfReason 3 } sfReasonAisRx OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Recv Ais." DEFVAL { disable } ::= { mplsTpOAMSfReason 4 } sfReasonCsfDefect OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Cfs Defect." DEFVAL { disable } ::= { mplsTpOAMSfReason 5 } mplsTpOAMRdiReason OBJECT IDENTIFIER ::= { mpls 50 } rdiReasonLoc OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "LOC defect." DEFVAL { enable } ::= { mplsTpOAMRdiReason 1 } rdiReasonCCError OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CC error defects: include RMEP not found, CC Interval mismatch." DEFVAL { enable } ::= { mplsTpOAMRdiReason 2 } rdiReasonCCMisMerge OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CC mismerge defects: include MEGID mismatch, Low CC level." DEFVAL { enable } ::= { mplsTpOAMRdiReason 3 } mplsTpOAMAisReason OBJECT IDENTIFIER ::= { mpls 51 } aisReasonLoc OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "LOC defect." DEFVAL { enable } ::= { mplsTpOAMAisReason 1 } aisReasonUnExpRMepID OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Unexpected RMEPID." DEFVAL { disable } ::= { mplsTpOAMAisReason 2 } aisReasonUnExpInterval OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Unexpected CC Interval." DEFVAL { disable } ::= { mplsTpOAMAisReason 3 } aisReasonUnExpMegId OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Unexpected MEGID." DEFVAL { disable } ::= { mplsTpOAMAisReason 4 } aisReasonUnExpMegLevel OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Unexpected CC Level." DEFVAL { disable } ::= { mplsTpOAMAisReason 5 } aisReasonAisDefect OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "AIS defect." DEFVAL { enable } ::= { mplsTpOAMAisReason 6 } aisReasonLockRx OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Lock Rx." DEFVAL { enable } ::= { mplsTpOAMAisReason 7 } mplsTpOAMEventRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMEventRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM event rule table." ::= { mpls 52 } mplsTpOAMEventRuleEntry OBJECT-TYPE SYNTAX MplsTpOAMEventRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-Tp event rule entries." INDEX { mplsTpOAMEventId } ::= { mplsTpOAMEventRuleTable 1 } MplsTpOAMEventRuleEntry ::= SEQUENCE { mplsTpOAMEventRuleId INTEGER, mplsTpOAMEventLog INTEGER, mplsTpOAMEventTrap INTEGER, mplsTpOAMEventCache INTEGER } mplsTpOAMEventRuleId OBJECT-TYPE SYNTAX INTEGER { loc(1), unExpRMepID(2), unExpInterval(3), unExpMegId(4), unExpMegLevel(5), rdiRx(6), rdiTx(7), waitFirstCC(8), aisRx(9), aisTx(10), aisDefect(11), eventCacheFull(12), oneDmCacheFull(13), lockRx(14), lockTx(15), lockDefect(16), crcDefect(17) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-tp OAM event id." ::= { mplsTpOAMEventRuleEntry 1 } mplsTpOAMEventLog OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "State of MPLS-tp event log." ::= { mplsTpOAMEventRuleEntry 2 } mplsTpOAMEventTrap OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "State of MPLS-tp event trap." ::= { mplsTpOAMEventRuleEntry 3 } mplsTpOAMEventCache OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "State of MPLS-tp event cache." ::= { mplsTpOAMEventRuleEntry 4 } mplsTpSectionTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all mpls-tp section instances." ::= { mpls 53 } mplsTpSectionEntry OBJECT-TYPE SYNTAX MplsTpSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpSectionTable." INDEX { sectionName } ::= { mplsTpSectionTable 1 } MplsTpSectionEntry ::= SEQUENCE { sectionName OCTET STRING, sectionRowStatus RowStatus, sectionPeer IpAddress, sectionOutIfindex Integer32, sectionOutMemIfindex Integer32, sectionDescription OCTET STRING, sectionMegLevel Integer32, sectionMegId OCTET STRING, sectionMegIdIcc Integer32, sectionMepId Integer32, sectionMepInterval INTEGER, sectionMepExp Integer32, sectionRMepId Integer32, sectionCCState INTEGER, sectionEventCacheSize Integer32, section1dmCacheSize Integer32, sectionAisInterval Integer32, sectionLck INTEGER, sectionLckInterval Integer32, sectionState INTEGER, sectionEvtLOC INTEGER, sectionEvtUMP INTEGER, sectionEvtUIN INTEGER, sectionEvtUMG INTEGER, sectionEvtULV INTEGER, sectionEvtW1ST INTEGER, sectionEvtRDIR INTEGER, sectionEvtRDIT INTEGER, sectionEvtAISR INTEGER, sectionEvtAIST INTEGER, sectionEvtAISD INTEGER, sectionEvtLCKR INTEGER, sectionEvtLCKT INTEGER, sectionEvtLCKD INTEGER, sectionEvtCRC INTEGER, sectionLckTxEnable INTEGER, sectionOAMState INTEGER, sectionLmDualExp Integer32, sectionLmDualStatInterval Integer32, sectionLmDualCacheSize Integer32, sectionLmSingleExp Integer32, sectionLmSingleInterval INTEGER, sectionLmSingleCacheSize Integer32, sectionLmEnableState INTEGER, sectionLmLocalLossThreshold Integer32, sectionLmRemoteLossThreshold Integer32, sectionLmSingleRxCount Integer32, sectionLmSingleTxCount Integer32, sectionLmSingleSuccessRate Integer32, sectionLmSingleStartTime OCTET STRING, sectionLmSingleEndTime OCTET STRING } sectionName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP section name." ::= { mplsTpSectionEntry 1 } sectionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpSectionEntry 10 } sectionPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The peer IP address of the section." ::= { mplsTpSectionEntry 11 } sectionOutIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The out-going interface of the section in non-ip env." ::= { mplsTpSectionEntry 12 } sectionOutMemIfindex OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The member out-going interface of the section in non-ip env." ::= { mplsTpSectionEntry 13 } sectionDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Characters describing of this mpls-tp section. Only less than 20 octets is accepted." ::= { mplsTpSectionEntry 14 } sectionMegLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "OAM level." DEFVAL { 7 } ::= { mplsTpSectionEntry 19 } sectionMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "MEG ID of the service." ::= { mplsTpSectionEntry 20 } sectionMegIdIcc OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "ICC length of MEG ID." DEFVAL { 6 } ::= { mplsTpSectionEntry 21 } sectionMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "MEP ID." ::= { mplsTpSectionEntry 22 } sectionMepInterval OBJECT-TYPE SYNTAX INTEGER { three-point-three-ms(1), ten-ms(2), one-hundred-ms(3), one-sec(4), ten-sec(5), one-min(6), ten-min(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "MEP Interval." ::= { mplsTpSectionEntry 23 } sectionMepExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "EXP value, default is 7." DEFVAL { 7 } ::= { mplsTpSectionEntry 24 } sectionRMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP ID." ::= { mplsTpSectionEntry 25 } sectionCCState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "CC state." DEFVAL { disable } ::= { mplsTpSectionEntry 26 } sectionEventCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Event entry cache size." DEFVAL { 8 } ::= { mplsTpSectionEntry 27 } section1dmCacheSize OBJECT-TYPE SYNTAX Integer32 (8..256) MAX-ACCESS read-write STATUS current DESCRIPTION "1dm entry cache size." DEFVAL { 8 } ::= { mplsTpSectionEntry 28 } sectionAisInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-write STATUS current DESCRIPTION "Interval of AIS PDU. 0:no oam-y1731 ais server enable." ::= { mplsTpSectionEntry 29 } sectionLck OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Lck state." DEFVAL { disable } ::= { mplsTpSectionEntry 31 } sectionLckInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-write STATUS current DESCRIPTION "Mpls-tp section lock interval. 0:no oam-y1731 lck server enable." DEFVAL { 0 } ::= { mplsTpSectionEntry 32 } sectionState OBJECT-TYPE SYNTAX INTEGER {init(0), fail(1), ok(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "MPLS-TP section status" ::= { mplsTpSectionEntry 33 } sectionEvtLOC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Loc state." DEFVAL { disable } ::= { mplsTpSectionEntry 34 } sectionEvtUMP OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp RMEPID state." DEFVAL { disable } ::= { mplsTpSectionEntry 35 } sectionEvtUIN OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp interval state." DEFVAL { disable } ::= { mplsTpSectionEntry 36 } sectionEvtUMG OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp MEGID state." DEFVAL { disable } ::= { mplsTpSectionEntry 37 } sectionEvtULV OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Unexp Level state." DEFVAL { disable } ::= { mplsTpSectionEntry 38 } sectionEvtW1ST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Wait 1st CCM state." DEFVAL { disable } ::= { mplsTpSectionEntry 39 } sectionEvtRDIR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 40 } sectionEvtRDIT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "RDI TX state." DEFVAL { disable } ::= { mplsTpSectionEntry 41 } sectionEvtAISR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 42 } sectionEvtAIST OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 43 } sectionEvtAISD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "AIS RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 44 } sectionEvtLCKR OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 45 } sectionEvtLCKT OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 46 } sectionEvtLCKD OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "LCK RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 47 } sectionLckTxEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "oam-y1731 lck server enable." DEFVAL { 2 } ::= { mplsTpSectionEntry 48 } sectionEvtCRC OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "CRC RX state." DEFVAL { disable } ::= { mplsTpSectionEntry 49 } sectionOAMState OBJECT-TYPE SYNTAX INTEGER {init(0), fail(1), ok(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "oam-y1731 Rmep state." ::= { mplsTpSectionEntry 50 } sectionLmDualExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsTpSectionEntry 61 } sectionLmDualStatInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment interval value." DEFVAL { 1 } ::= { mplsTpSectionEntry 62 } sectionLmDualCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure dual-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsTpSectionEntry 63 } sectionLmSingleExp OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment packets with specified exp will be counted. <0-7> specified exp; 8 means Packets with different exp will be counted separately; 9 means All packets with different exp will be counted together." ::= { mplsTpSectionEntry 66 } sectionLmSingleInterval OBJECT-TYPE SYNTAX INTEGER { one-hundred-ms(1), one-sec(2), ten-sec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config Interval." ::= { mplsTpSectionEntry 67 } sectionLmSingleCacheSize OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure single-ended loss measurment cache size." DEFVAL { 128 } ::= { mplsTpSectionEntry 68 } sectionLmEnableState OBJECT-TYPE SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable oam-y1731 loss measurment." DEFVAL { disable } ::= { mplsTpSectionEntry 70 } sectionLmLocalLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsTpSectionEntry 71 } sectionLmRemoteLossThreshold OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Local packet loss percentage, 0 means threshold not enabled." DEFVAL { 0 } ::= { mplsTpSectionEntry 72 } sectionLmSingleRxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Rx count." ::= { mplsTpSectionEntry 73 } sectionLmSingleTxCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended packet Tx count." ::= { mplsTpSectionEntry 74 } sectionLmSingleSuccessRate OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM single-ended success rate." ::= { mplsTpSectionEntry 75 } sectionLmSingleStartTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended start time." ::= { mplsTpSectionEntry 76 } sectionLmSingleEndTime OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "LMM proactive single-ended end time." ::= { mplsTpSectionEntry 77 } mplsTpSectionAisClientTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpSectionAisClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all clients bound to mpls-tp section ais server." ::= { mpls 54 } mplsTpSectionAisClientEntry OBJECT-TYPE SYNTAX MplsTpSectionAisClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpSectionAisClientTable." INDEX { sectionName, sectionAisClientBindType, sectionAisClientBindName } ::= { mplsTpSectionAisClientTable 1 } MplsTpSectionAisClientEntry ::= SEQUENCE { sectionAisClientBindType INTEGER, sectionAisClientBindName OCTET STRING, sectionAisClientRowStatus RowStatus } sectionAisClientBindType OBJECT-TYPE SYNTAX INTEGER {lsp-p(1),lsp-pe(2)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client type for ais server(lsp-pe)." ::= { mplsTpSectionAisClientEntry 1 } sectionAisClientBindName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for MPLS-TP section ais server." ::= { mplsTpSectionAisClientEntry 2 } sectionAisClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpSectionAisClientEntry 10 } mplsTpSectionLckClientTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpSectionLckClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all clients bound to mpls-tp section lck server." ::= { mpls 55 } mplsTpSectionLckClientEntry OBJECT-TYPE SYNTAX MplsTpSectionLckClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpSectionLckClientTable." INDEX { sectionName, sectionLckClientBindType, sectionLckClientBindName } ::= { mplsTpSectionLckClientTable 1 } MplsTpSectionLckClientEntry ::= SEQUENCE { sectionLckClientBindType INTEGER, sectionLckClientBindName OCTET STRING, sectionLckClientRowStatus RowStatus } sectionLckClientBindType OBJECT-TYPE SYNTAX INTEGER {lsp-p(1),lsp-pe(2)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client type for lck server(section)." ::= { mplsTpSectionLckClientEntry 1 } sectionLckClientBindName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Client lsp name for MPLS-TP section lck server." ::= { mplsTpSectionLckClientEntry 2 } sectionLckClientRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpSectionLckClientEntry 10 } mplsTpOAMClearCache OBJECT-TYPE SYNTAX INTEGER { event-cache(1), onedm-cache(2), statistics-cache(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear MPLS-TP OAM cache ." ::= { mpls 56 } mplsTpOAMLoopbackDiscoveryTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLoopbackDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp discovery loopback." ::= { mpls 60 } mplsTpOAMLoopbackDiscoveryEntry OBJECT-TYPE SYNTAX MplsTpOAMLoopbackDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMLoopbackDiscoveryTable." INDEX { oamDiscoveryIndex } ::= { mplsTpOAMLoopbackDiscoveryTable 1 } MplsTpOAMLoopbackDiscoveryEntry ::= SEQUENCE { oamDiscoveryIndex Integer32, oamDiscoveryServiceType INTEGER, oamDiscoveryServiceName OCTET STRING, oamDiscoveryStartTTL Integer32, oamDiscoveryEndTTL Integer32, oamDiscoveryMepIdTlv INTEGER, oamDiscoveryDataTlv Integer32, oamDiscoveryTimeout Integer32, oamDiscoveryExp Integer32, oamDiscoveryTstTlv Integer32, oamDiscoveryTstPattern Integer32, oamDiscoveryRowstatus RowStatus, oamDiscoveryOperState INTEGER, oamDiscoveryTimeSpent Integer32, oamDiscoverySuccessRate Integer32 } oamDiscoveryIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam discovery loopback request.Must be 1." ::= { mplsTpOAMLoopbackDiscoveryEntry 1 } oamDiscoveryServiceType OBJECT-TYPE SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAMLoopbackDiscoveryEntry 2 } oamDiscoveryServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAMLoopbackDiscoveryEntry 3 } oamDiscoveryStartTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to start." ::= { mplsTpOAMLoopbackDiscoveryEntry 5 } oamDiscoveryEndTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." ::= { mplsTpOAMLoopbackDiscoveryEntry 6 } oamDiscoveryMepIdTlv OBJECT-TYPE SYNTAX INTEGER {request(1), no-request(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to request the mepid tlv for the request." DEFVAL { no-request } ::= { mplsTpOAMLoopbackDiscoveryEntry 7 } oamDiscoveryDataTlv OBJECT-TYPE SYNTAX Integer32 (0..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 0 } ::= { mplsTpOAMLoopbackDiscoveryEntry 8 } oamDiscoveryTimeout OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 5 } ::= { mplsTpOAMLoopbackDiscoveryEntry 9 } oamDiscoveryExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS exp." DEFVAL { 7 } ::= { mplsTpOAMLoopbackDiscoveryEntry 10 } oamDiscoveryTstTlv OBJECT-TYPE SYNTAX Integer32 (2..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "Send with test TLV." ::= { mplsTpOAMLoopbackDiscoveryEntry 11 } oamDiscoveryTstPattern OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure test pattern. 0 Null signal without CRC-32. 1 Null signal with CRC-32. 2 PRBS without CRC-32. 3 PRBS with CRC-32." ::= { mplsTpOAMLoopbackDiscoveryEntry 12 } oamDiscoveryRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAMLoopbackDiscoveryEntry 15 } oamDiscoveryOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { mplsTpOAMLoopbackDiscoveryEntry 16 } oamDiscoveryTimeSpent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time spent of the request, in ms." ::= { mplsTpOAMLoopbackDiscoveryEntry 17 } oamDiscoverySuccessRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The success rate of the request." ::= { mplsTpOAMLoopbackDiscoveryEntry 18 } mplsTpOAMDiscoveryResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMDiscoveryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp discovery result." ::= { mpls 61 } mplsTpOAMDiscoveryResultEntry OBJECT-TYPE SYNTAX MplsTpOAMDiscoveryResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMDiscoveryResultTable." INDEX { oamDiscoveryResultTTL } ::= { mplsTpOAMDiscoveryResultTable 1 } MplsTpOAMDiscoveryResultEntry ::= SEQUENCE { oamDiscoveryResultTTL Integer32, oamDiscoveryResultReplyType INTEGER, oamDiscoveryResultMepId Integer32, oamDiscoveryResultICC OCTET STRING, oamDiscoveryResultNodeId IpAddress, oamDiscoveryResultIfNum Integer32 } oamDiscoveryResultTTL OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam discovery loopback state. TTL number" ::= { mplsTpOAMDiscoveryResultEntry 1 } oamDiscoveryResultReplyType OBJECT-TYPE SYNTAX INTEGER { mip(1), mep(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAMDiscoveryResultEntry 2 } oamDiscoveryResultMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAMDiscoveryResultEntry 3 } oamDiscoveryResultICC OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "ICC." ::= { mplsTpOAMDiscoveryResultEntry 4 } oamDiscoveryResultNodeId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MIP node id" ::= { mplsTpOAMDiscoveryResultEntry 5 } oamDiscoveryResultIfNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface number." ::= { mplsTpOAMDiscoveryResultEntry 6 } mplsTpOAMLoopbackRmepTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLoopbackRmepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp discovery rmep." ::= { mpls 62 } mplsTpOAMLoopbackRmepEntry OBJECT-TYPE SYNTAX MplsTpOAMLoopbackRmepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMLoopbackRmepTable." INDEX { oamRmepIndex } ::= { mplsTpOAMLoopbackRmepTable 1 } MplsTpOAMLoopbackRmepEntry ::= SEQUENCE { oamRmepIndex Integer32, oamRmepServiceType INTEGER, oamRmepServiceName OCTET STRING, oamRmepId Integer32, oamRmepMepIdTlv INTEGER, oamRmepDataTlv Integer32, oamRmepTimeout Integer32, oamRmepRepeat Integer32, oamRmepExp Integer32, oamRmepRowstatus RowStatus, oamRmepOperState INTEGER, oamRmepTimeSpent Integer32, oamRmepSuccessRate Integer32 } oamRmepIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam rmep loopback request.Must be 1." ::= { mplsTpOAMLoopbackRmepEntry 1 } oamRmepServiceType OBJECT-TYPE SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAMLoopbackRmepEntry 2 } oamRmepServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAMLoopbackRmepEntry 3 } oamRmepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Rmep id of the request." ::= { mplsTpOAMLoopbackRmepEntry 5 } oamRmepMepIdTlv OBJECT-TYPE SYNTAX INTEGER {request(1), no-request(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to request the mepid tlv for the request." DEFVAL { no-request } ::= { mplsTpOAMLoopbackRmepEntry 6 } oamRmepDataTlv OBJECT-TYPE SYNTAX Integer32 (0..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 0 } ::= { mplsTpOAMLoopbackRmepEntry 7 } oamRmepTimeout OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 5 } ::= { mplsTpOAMLoopbackRmepEntry 8 } oamRmepRepeat OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Repeat count." DEFVAL { 1 } ::= { mplsTpOAMLoopbackRmepEntry 9 } oamRmepExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS exp." DEFVAL { 7 } ::= { mplsTpOAMLoopbackRmepEntry 10 } oamRmepRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAMLoopbackRmepEntry 15 } oamRmepOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { mplsTpOAMLoopbackRmepEntry 16 } oamRmepTimeSpent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time spent of the request, in ms." ::= { mplsTpOAMLoopbackRmepEntry 17 } oamRmepSuccessRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The success rate of the request." ::= { mplsTpOAMLoopbackRmepEntry 18 } mplsTpOAMLoopbackMipTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLoopbackMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp discovery mip." ::= { mpls 64 } mplsTpOAMLoopbackMipEntry OBJECT-TYPE SYNTAX MplsTpOAMLoopbackMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMLoopbackMipTable." INDEX { oamMipIndex } ::= { mplsTpOAMLoopbackMipTable 1 } MplsTpOAMLoopbackMipEntry ::= SEQUENCE { oamMipIndex Integer32, oamMipServiceType INTEGER, oamMipServiceName OCTET STRING, oamMipTTL Integer32, oamMipNodeId IpAddress, oamMipMepIdTlv INTEGER, oamMipDataTlv Integer32, oamMipTimeout Integer32, oamMipRepeat Integer32, oamMipExp Integer32, oamMipRowstatus RowStatus, oamMipOperState INTEGER, oamMipTimeSpent Integer32, oamMipSuccessRate Integer32 } oamMipIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam mip loopback request.Must be 1." ::= { mplsTpOAMLoopbackMipEntry 1 } oamMipServiceType OBJECT-TYPE SYNTAX INTEGER { lsp-pe(2), pw-tpe(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAMLoopbackMipEntry 2 } oamMipServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAMLoopbackMipEntry 3 } oamMipTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL to the target mip." ::= { mplsTpOAMLoopbackMipEntry 5 } oamMipNodeId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Mip node id." ::= { mplsTpOAMLoopbackMipEntry 6 } oamMipMepIdTlv OBJECT-TYPE SYNTAX INTEGER {request(1), no-request(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to request the mepid tlv for the request." DEFVAL { no-request } ::= { mplsTpOAMLoopbackMipEntry 7 } oamMipDataTlv OBJECT-TYPE SYNTAX Integer32 (0..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 0 } ::= { mplsTpOAMLoopbackMipEntry 8 } oamMipTimeout OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "TTL number to end." DEFVAL { 5 } ::= { mplsTpOAMLoopbackMipEntry 9 } oamMipRepeat OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Repeat count." DEFVAL { 1 } ::= { mplsTpOAMLoopbackMipEntry 10 } oamMipExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "MPLS exp." DEFVAL { 7 } ::= { mplsTpOAMLoopbackMipEntry 11 } oamMipRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAMLoopbackMipEntry 15 } oamMipOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { mplsTpOAMLoopbackMipEntry 16 } oamMipTimeSpent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time spent of the request, in ms." ::= { mplsTpOAMLoopbackMipEntry 17 } oamMipSuccessRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The success rate of the request." ::= { mplsTpOAMLoopbackMipEntry 18 } mplsTpOAM1dmRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAM1dmRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp 1dm request." ::= { mpls 65 } mplsTpOAM1dmRequestEntry OBJECT-TYPE SYNTAX MplsTpOAM1dmRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAM1dmRequestTable." INDEX { oam1dmReqIndex } ::= { mplsTpOAM1dmRequestTable 1 } MplsTpOAM1dmRequestEntry ::= SEQUENCE { oam1dmReqIndex Integer32, oam1dmReqServiceType INTEGER, oam1dmReqServiceName OCTET STRING, oam1dmReqRepeat Integer32, oam1dmReqExp Integer32, oam1dmReqInterval INTEGER, oam1dmReqRowstatus RowStatus, oam1dmReqOperState INTEGER } oam1dmReqIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam 1dm request.Must be 1." ::= { mplsTpOAM1dmRequestEntry 1 } oam1dmReqServiceType OBJECT-TYPE SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAM1dmRequestEntry 2 } oam1dmReqServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAM1dmRequestEntry 3 } oam1dmReqRepeat OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Config Exp." ::= { mplsTpOAM1dmRequestEntry 5 } oam1dmReqExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Config Exp." ::= { mplsTpOAM1dmRequestEntry 6 } oam1dmReqInterval OBJECT-TYPE SYNTAX INTEGER { one-hundred-ms(1), one-sec(2), ten-sec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config Interval." DEFVAL { one-sec } ::= { mplsTpOAM1dmRequestEntry 7 } oam1dmReqRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAM1dmRequestEntry 15 } oam1dmReqOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { mplsTpOAM1dmRequestEntry 16 } mplsTpOAMDmmRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMDmmRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp dmm request." ::= { mpls 67 } mplsTpOAMDmmRequestEntry OBJECT-TYPE SYNTAX MplsTpOAMDmmRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMDmmRequestTable." INDEX { oamDmmReqIndex } ::= { mplsTpOAMDmmRequestTable 1 } MplsTpOAMDmmRequestEntry ::= SEQUENCE { oamDmmReqIndex Integer32, oamDmmReqServiceType INTEGER, oamDmmReqServiceName OCTET STRING, oamDmmReqRepeat Integer32, oamDmmReqExp Integer32, oamDmmReqInterval INTEGER, oamDmmReqRowstatus RowStatus, oamDmmReqOperState INTEGER, oamDmmReqSuccessRate Integer32, oamDmmReqAverDelay Counter64, oamDmmReqAverVar Counter64, oamDmmReqMaxDelay Counter64, oamDmmReqMinDelay Counter64 } oamDmmReqIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam dmm request.Must be 1." ::= { mplsTpOAMDmmRequestEntry 1 } oamDmmReqServiceType OBJECT-TYPE SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the request." ::= { mplsTpOAMDmmRequestEntry 2 } oamDmmReqServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the request." ::= { mplsTpOAMDmmRequestEntry 3 } oamDmmReqRepeat OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Config Exp." ::= { mplsTpOAMDmmRequestEntry 5 } oamDmmReqExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Config Exp." ::= { mplsTpOAMDmmRequestEntry 6 } oamDmmReqInterval OBJECT-TYPE SYNTAX INTEGER { one-hundred-ms(1), one-sec(2), ten-sec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Config Interval." DEFVAL { one-sec } ::= { mplsTpOAMDmmRequestEntry 7 } oamDmmReqRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAMDmmRequestEntry 15 } oamDmmReqOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { mplsTpOAMDmmRequestEntry 16 } oamDmmReqSuccessRate OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Success-rate of the operation." ::= { mplsTpOAMDmmRequestEntry 17 } oamDmmReqAverDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average delay." ::= { mplsTpOAMDmmRequestEntry 18 } oamDmmReqAverVar OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average variation." ::= { mplsTpOAMDmmRequestEntry 19 } oamDmmReqMaxDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum delay." ::= { mplsTpOAMDmmRequestEntry 20 } oamDmmReqMinDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum delay." ::= { mplsTpOAMDmmRequestEntry 21 } mplsTpOAMDmmResultTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMDmmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM Dmm Result table." ::= { mpls 68 } mplsTpOAMDmmResultEntry OBJECT-TYPE SYNTAX MplsTpOAMDmmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP Dmm Result entries." INDEX { mplsTpOAMDmmResultIndex } ::= { mplsTpOAMDmmResultTable 1 } MplsTpOAMDmmResultEntry ::= SEQUENCE { mplsTpOAMDmmResultIndex Integer32, mplsTpOAMDmmResultDelay Counter64, mplsTpOAMDmmResultVariation Counter64, mplsTpOAMDmmResultExp Integer32, mplsTpOAMDmmResultTime OCTET STRING } mplsTpOAMDmmResultIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the entry." ::= { mplsTpOAMDmmResultEntry 1 } mplsTpOAMDmmResultDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Delay time." ::= { mplsTpOAMDmmResultEntry 2 } mplsTpOAMDmmResultVariation OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Variation." ::= { mplsTpOAMDmmResultEntry 3 } mplsTpOAMDmmResultExp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Action type." ::= { mplsTpOAMDmmResultEntry 4 } mplsTpOAMDmmResultTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Event time." ::= { mplsTpOAMDmmResultEntry 5 } mplsTpOAMResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM resource table." ::= { mpls 70 } mplsTpOAMResourceEntry OBJECT-TYPE SYNTAX MplsTpOAMResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-Tp resource rule entries." INDEX { mplsTpOAMResourceId } ::= { mplsTpOAMResourceTable 1 } MplsTpOAMResourceEntry ::= SEQUENCE { mplsTpOAMResourceId INTEGER, mplsTpOAMResourceMax Integer32, mplsTpOAMResourceCurrent Integer32 } mplsTpOAMResourceId OBJECT-TYPE SYNTAX INTEGER { section(1), meg(2), local-mep(3), remote-mep(4), mip(5), csf(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Resource type." ::= { mplsTpOAMResourceEntry 1 } mplsTpOAMResourceMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max resource number." ::= { mplsTpOAMResourceEntry 2 } mplsTpOAMResourceCurrent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current resource number." ::= { mplsTpOAMResourceEntry 3 } mplsTpOAMStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM Statistic table." ::= { mpls 71 } mplsTpOAMStatisticEntry OBJECT-TYPE SYNTAX MplsTpOAMStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-Tp Statistic rule entries." INDEX { mplsTpOAMStatisticPktType } ::= { mplsTpOAMStatisticTable 1 } MplsTpOAMStatisticEntry ::= SEQUENCE { mplsTpOAMStatisticPktType INTEGER, mplsTpOAMStatisticTx Integer32, mplsTpOAMStatisticRx Integer32, mplsTpOAMStatisticRxErr Integer32 } mplsTpOAMStatisticPktType OBJECT-TYPE SYNTAX INTEGER { lbm(1), lbr(2), ais(3), one-dm(4), dmm(5), dmr(6), unexp-cc(7), unknown(8), lck(9), csf(10), aps(11) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistic type." ::= { mplsTpOAMStatisticEntry 1 } mplsTpOAMStatisticTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "TX packet number." ::= { mplsTpOAMStatisticEntry 2 } mplsTpOAMStatisticRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX packet number." ::= { mplsTpOAMStatisticEntry 3 } mplsTpOAMStatisticRxErr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RX error packet number." ::= { mplsTpOAMStatisticEntry 4 } mplsTpOAMEventTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM Event table." ::= { mpls 72 } mplsTpOAMEventEntry OBJECT-TYPE SYNTAX MplsTpOAMEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP Event entries." INDEX { mplsTpOAMEventIndex } ::= { mplsTpOAMEventTable 1 } MplsTpOAMEventEntry ::= SEQUENCE { mplsTpOAMEventIndex Integer32, mplsTpOAMEventService INTEGER, mplsTpOAMEventMegId OCTET STRING, mplsTpOAMEventMepId Integer32, mplsTpOAMEventId INTEGER, mplsTpOAMEventAction INTEGER, mplsTpOAMEventTime OCTET STRING } mplsTpOAMEventIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event index." ::= { mplsTpOAMEventEntry 1 } mplsTpOAMEventService OBJECT-TYPE SYNTAX INTEGER { section(1), lsp(2), pw-tpe(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type of the event." ::= { mplsTpOAMEventEntry 2 } mplsTpOAMEventMegId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMEventEntry 3 } mplsTpOAMEventMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID." ::= { mplsTpOAMEventEntry 4 } mplsTpOAMEventId OBJECT-TYPE SYNTAX INTEGER { loc(1), unExpRMepId(2), unExpInterval(3), unExpMegId(4), unExpLevel(5), rdiRx(6), rdiTx(7), waitFistCCM(8), aisRx(9), aisTx(10), aisDefect(11), eventFull(12), oneDmFull(13), lockRx(14), lockTx(15), lockDefect(16), crcDefect(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Event type." ::= { mplsTpOAMEventEntry 5 } mplsTpOAMEventAction OBJECT-TYPE SYNTAX INTEGER { occur(1), clear(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action type." ::= { mplsTpOAMEventEntry 6 } mplsTpOAMEventTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Event time." ::= { mplsTpOAMEventEntry 7 } mplsTpOAM1dmTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAM1dmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM 1dm table." ::= { mpls 73 } mplsTpOAM1dmEntry OBJECT-TYPE SYNTAX MplsTpOAM1dmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP 1dm entries." INDEX { mplsTpOAM1dmMegId, mplsTpOAM1dmIndex } ::= { mplsTpOAM1dmTable 1 } MplsTpOAM1dmEntry ::= SEQUENCE { mplsTpOAM1dmMegId OCTET STRING, mplsTpOAM1dmIndex Integer32, mplsTpOAM1dmService INTEGER, mplsTpOAM1dmMepId Integer32, mplsTpOAM1dmDelay Counter64, mplsTpOAM1dmVariation Counter64, mplsTpOAM1dmExp Integer32, mplsTpOAM1dmTime OCTET STRING } mplsTpOAM1dmMegId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAM1dmEntry 1 } mplsTpOAM1dmIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the entry." ::= { mplsTpOAM1dmEntry 2 } mplsTpOAM1dmService OBJECT-TYPE SYNTAX INTEGER { section(1), lsp(2), pw-tpe(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type of the data." ::= { mplsTpOAM1dmEntry 3 } mplsTpOAM1dmMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID." ::= { mplsTpOAM1dmEntry 4 } mplsTpOAM1dmDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Delay time." ::= { mplsTpOAM1dmEntry 5 } mplsTpOAM1dmVariation OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Variation." ::= { mplsTpOAM1dmEntry 6 } mplsTpOAM1dmExp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Action type." ::= { mplsTpOAM1dmEntry 7 } mplsTpOAM1dmTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Event time." ::= { mplsTpOAM1dmEntry 8 } mplsTpOAM1dmStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAM1dmStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM 1dm statistic table." ::= { mpls 74 } mplsTpOAM1dmStatisticEntry OBJECT-TYPE SYNTAX MplsTpOAM1dmStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP 1dm statistic entries." INDEX { mplsTpOAM1dmStatMegId } ::= { mplsTpOAM1dmStatisticTable 1 } MplsTpOAM1dmStatisticEntry ::= SEQUENCE { mplsTpOAM1dmStatMegId OCTET STRING, mplsTpOAM1dmStatMinDelay Counter64, mplsTpOAM1dmStatMaxDelay Counter64, mplsTpOAM1dmStatAverDelay Counter64, mplsTpOAM1dmStatAverVariation Counter64 } mplsTpOAM1dmStatMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAM1dmStatisticEntry 1 } mplsTpOAM1dmStatMinDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum delay time." ::= { mplsTpOAM1dmStatisticEntry 2 } mplsTpOAM1dmStatMaxDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum delay time." ::= { mplsTpOAM1dmStatisticEntry 3 } mplsTpOAM1dmStatAverDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average delay time." ::= { mplsTpOAM1dmStatisticEntry 4 } mplsTpOAM1dmStatAverVariation OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average variation." ::= { mplsTpOAM1dmStatisticEntry 5 } mplsTpOAMMPStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMMPStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM MEP and MIP Statistic table." ::= { mpls 75 } mplsTpOAMMPStatisticEntry OBJECT-TYPE SYNTAX MplsTpOAMMPStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-Tp MP Statistic entries." INDEX { mplsTpOAMMPStatMegId, mplsTpOAMMPStatPktType } ::= { mplsTpOAMMPStatisticTable 1 } MplsTpOAMMPStatisticEntry ::= SEQUENCE { mplsTpOAMMPStatMegId OCTET STRING, mplsTpOAMMPStatPktType INTEGER, mplsTpOAMMPStatTx Counter64, mplsTpOAMMPStatRx Counter64, mplsTpOAMMPStatRxErr Counter64 } mplsTpOAMMPStatMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMMPStatisticEntry 1 } mplsTpOAMMPStatPktType OBJECT-TYPE SYNTAX INTEGER { lbm(1), lbr(2), ais(3), one-dm(4), dmm(5), dmr(6), unexp-cc(7), unknown(8), lck(9), csf(10), aps(11) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet type." ::= { mplsTpOAMMPStatisticEntry 2 } mplsTpOAMMPStatTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx packet number." ::= { mplsTpOAMMPStatisticEntry 3 } mplsTpOAMMPStatRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx packet number." ::= { mplsTpOAMMPStatisticEntry 4 } mplsTpOAMMPStatRxErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx error packet number." ::= { mplsTpOAMMPStatisticEntry 5 } mplsTpOAMMepEventDefectTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMMepEventDefectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM MEP event defect table." ::= { mpls 76 } mplsTpOAMMepEventDefectEntry OBJECT-TYPE SYNTAX MplsTpOAMMepEventDefectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-Tp MEP event defect entries." INDEX { mplsTpOAMMepEvtMegId, mplsTpOAMMepEvtId } ::= { mplsTpOAMMepEventDefectTable 1 } MplsTpOAMMepEventDefectEntry ::= SEQUENCE { mplsTpOAMMepEvtMegId OCTET STRING, mplsTpOAMMepEvtId INTEGER, mplsTpOAMMepEvtDefect INTEGER } mplsTpOAMMepEvtMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMMepEventDefectEntry 1 } mplsTpOAMMepEvtId OBJECT-TYPE SYNTAX INTEGER { loc(1), unExpRMepId(2), unExpInterval(3), unExpMegId(4), unExpLevel(5), rdiRx(6), rdiTx(7), waitFistCCM(8), aisRx(9), aisTx(10), aisDefect(11), eventFull(12), oneDmFull(13), lockRx(14), lockTx(15), lockDefect(16), crcDefect(17) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event type." ::= { mplsTpOAMMepEventDefectEntry 2 } mplsTpOAMMepEvtDefect OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Event status." ::= { mplsTpOAMMepEventDefectEntry 3 } mplsTPVpwsOAMCsfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTPVpwsOAMCsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Display OAM csf status of an MPLS Layer-2 Virtual Circuit." ::= { mpls 77 } mplsTPVpwsOAMCsfEntry OBJECT-TYPE SYNTAX MplsTPVpwsOAMCsfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTPVpwsOAMCsfTable." INDEX { mplsTPVpwsOAMCsfVcId} ::= { mplsTPVpwsOAMCsfTable 1 } MplsTPVpwsOAMCsfEntry ::= SEQUENCE { mplsTPVpwsOAMCsfVcId Integer32, mplsTPVpwsOAMCsfSrvState INTEGER, mplsTPVpwsOAMCsfClientState INTEGER, mplsTPVpwsOAMCsfDCReason INTEGER, mplsTPVpwsOAMCsfClientInterval Integer32, mplsTPVpwsOAMCsfACDownEn INTEGER, mplsTPVpwsOAMCsfACStatus INTEGER, mplsTPVpwsOAMCsfTxCSFPacket INTEGER } mplsTPVpwsOAMCsfVcId OBJECT-TYPE SYNTAX Integer32(1..424967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for MPLS Layer-2 Virtual Circuit." ::= { mplsTPVpwsOAMCsfEntry 1 } mplsTPVpwsOAMCsfSrvState OBJECT-TYPE SYNTAX INTEGER { los(0), fdi(1), rdi(2), ok(3), init(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Csf Local AC state." ::= { mplsTPVpwsOAMCsfEntry 2 } mplsTPVpwsOAMCsfClientState OBJECT-TYPE SYNTAX INTEGER { los(0), fdi(1), rdi(2), dc(3), init(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Csf Remote AC state." ::= { mplsTPVpwsOAMCsfEntry 3 } mplsTPVpwsOAMCsfDCReason OBJECT-TYPE SYNTAX INTEGER { init(0), timeout(1), dci(2), invalid(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Csf DC reason." ::= { mplsTPVpwsOAMCsfEntry 4 } mplsTPVpwsOAMCsfClientInterval OBJECT-TYPE SYNTAX Integer32 (0|1|60) MAX-ACCESS read-only STATUS current DESCRIPTION "Interval of CSF client PDU, 0 is invalid." ::= { mplsTPVpwsOAMCsfEntry 5 } mplsTPVpwsOAMCsfACDownEn OBJECT-TYPE SYNTAX INTEGER { disable(0), down(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "When receive csf packet, set AC port down. 1 is set AC port to down." ::= { mplsTPVpwsOAMCsfEntry 6 } mplsTPVpwsOAMCsfACStatus OBJECT-TYPE SYNTAX INTEGER { up(0), down(1), admin-down(2), errdisable(3), csf-ac-down(4), absent(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AC interface status." ::= { mplsTPVpwsOAMCsfEntry 7 } mplsTPVpwsOAMCsfTxCSFPacket OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "TX CSF packet status." ::= { mplsTPVpwsOAMCsfEntry 8 } mplsVplsDynamicFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsDynamicFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls dynamic fdb table." ::= { mpls 78 } mplsVplsDynamicFdbEntry OBJECT-TYPE SYNTAX MplsVplsDynamicFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPLS dynamic fdb entries." INDEX { mplsVplsDynamicFdbVplsId, mplsVplsDynamicFdbMacAddr} ::= { mplsVplsDynamicFdbTable 1 } MplsVplsDynamicFdbEntry ::= SEQUENCE { mplsVplsDynamicFdbVplsId Integer32, mplsVplsDynamicFdbMacAddr MacAddress, mplsVplsDynamicFdbIfName OCTET STRING, mplsVplsDynamicFdbPeerIp IpAddress, mplsVplsDynamicFdbTPPeerName OCTET STRING } mplsVplsDynamicFdbVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsDynamicFdbEntry 1 } mplsVplsDynamicFdbMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac address of the fdb entry." ::= { mplsVplsDynamicFdbEntry 2 } mplsVplsDynamicFdbIfName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going interface of the VPLS fdb entry." ::= { mplsVplsDynamicFdbEntry 3 } mplsVplsDynamicFdbPeerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going peer IPV4 address of the VPLS fdb entry." ::= { mplsVplsDynamicFdbEntry 4 } mplsVplsDynamicFdbTPPeerName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Out-going tp-peer of the VPLS fdb entry." ::= { mplsVplsDynamicFdbEntry 5 } mplsGlobal OBJECT IDENTIFIER ::= { mpls 79 } mplsGlobalCurrentStaticLabelBlockNum OBJECT-TYPE SYNTAX INTEGER (1..8192) MAX-ACCESS read-only STATUS current DESCRIPTION "Get current static label block number." ::= { mplsGlobal 1 } mplsGlobalCurrentDynamicLabelBlockNum OBJECT-TYPE SYNTAX Integer32 (0..8192) MAX-ACCESS read-only STATUS current DESCRIPTION "Get current dynamic label block number." ::= { mplsGlobal 2 } mplsGlobalConfigStaticLabelBlockNum OBJECT-TYPE SYNTAX Integer32 (1..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "Get static label block number configured for next reboot, configure static label block number for next reboot." ::= { mplsGlobal 3 } mplsVplsIgspGlbInfo OBJECT IDENTIFIER ::= { mpls 80 } mplsVplsIgspGlbInfoMaxMemNum OBJECT-TYPE SYNTAX Integer32 (1..16384) MAX-ACCESS read-write STATUS current DESCRIPTION "Vpls IGMP Snooping Max Member Number." DEFVAL { 16384 } ::= { mplsVplsIgspGlbInfo 1 } mplsVplsIgspGlbInfoQuerierTcnCnt OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Vpls IGMP querier TCN query count." DEFVAL { 2 } ::= { mplsVplsIgspGlbInfo 2 } mplsVplsIgspGlbInfoQuerierTcnInterval OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Vpls IGMP querier TCN query interval." DEFVAL { 10 } ::= { mplsVplsIgspGlbInfo 3 } mplsVplsIgspGlbInfoCurrMemNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls IGMP snooping current member number." DEFVAL { 0 } ::= { mplsVplsIgspGlbInfo 4 } mplsVplsIgspCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsIgspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls igmp snooping config table." ::= { mpls 81 } mplsVplsIgspCfgEntry OBJECT-TYPE SYNTAX MplsVplsIgspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsIgspCfgTable." INDEX { mplsVplsIgspVplsId } ::= { mplsVplsIgspCfgTable 1 } MplsVplsIgspCfgEntry ::= SEQUENCE { mplsVplsIgspVplsId Integer32, mplsVplsIgspStatus INTEGER, mplsVplsIgspFastLeave INTEGER, mplsVplsIgspVersion Integer32, mplsVplsIgspMaxMemNum Integer32, mplsVplsIgspReportSuppr INTEGER, mplsVplsIgspLastMemQueryCnt Integer32, mplsVplsIgspLastMemQueryInteval Integer32, mplsVplsIgspRobuVari Integer32, mplsVplsIgspAccessGroup OCTET STRING, mplsVplsIgspQuerierStatus INTEGER, mplsVplsIgspQuerierTimeout Integer32, mplsVplsIgspQuerierAdd IpAddress, mplsVplsIgspQueryInterval Integer32, mplsVplsIgspQueryMaxResponTime Integer32, mplsVplsIgspElectedQuerier IpAddress, mplsVplsIgspQueryOperationalState INTEGER, mplsVplsIgspBundingCtrlVlan Integer32 } mplsVplsIgspVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." DEFVAL { 0 } ::= { mplsVplsIgspCfgEntry 1 } mplsVplsIgspStatus OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable or disable VPLS IGMP Snooping." ::= { mplsVplsIgspCfgEntry 2 } mplsVplsIgspFastLeave OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable VPLS IGMP Snooping Fast Leave." ::= { mplsVplsIgspCfgEntry 3 } mplsVplsIgspVersion OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set VPLS IGMP Snooping Version." DEFVAL { 2 } ::= { mplsVplsIgspCfgEntry 4 } mplsVplsIgspMaxMemNum OBJECT-TYPE SYNTAX Integer32 (1..16384) MAX-ACCESS read-write STATUS current DESCRIPTION "VPLS IGMP Snooping Max Member Number." DEFVAL { 16384 } ::= { mplsVplsIgspCfgEntry 5 } mplsVplsIgspReportSuppr OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "VPLS IGMPv1/V2 Report Suppression." ::= { mplsVplsIgspCfgEntry 6 } mplsVplsIgspLastMemQueryCnt OBJECT-TYPE SYNTAX Integer32 (2..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Last Member Query Count value." DEFVAL { 2 } ::= { mplsVplsIgspCfgEntry 7 } mplsVplsIgspLastMemQueryInteval OBJECT-TYPE SYNTAX Integer32 (1000..25500) MAX-ACCESS read-write STATUS current DESCRIPTION "Last Member Query Interval value." DEFVAL { 1000 } ::= { mplsVplsIgspCfgEntry 8 } mplsVplsIgspRobuVari OBJECT-TYPE SYNTAX Integer32 (2..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Robustness Variable value." DEFVAL { 2 } ::= { mplsVplsIgspCfgEntry 9 } mplsVplsIgspAccessGroup OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Named Standard Access list." ::= { mplsVplsIgspCfgEntry 10 } mplsVplsIgspQuerierStatus OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable Vpls IGMP Snooping Query." ::= { mplsVplsIgspCfgEntry 11 } mplsVplsIgspQuerierTimeout OBJECT-TYPE SYNTAX Integer32 (60..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Vpls IGMP previous querier timeout value." DEFVAL { 255 } ::= { mplsVplsIgspCfgEntry 12 } mplsVplsIgspQuerierAdd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Vpls IGMP Querier IP Address." ::= { mplsVplsIgspCfgEntry 13 } mplsVplsIgspQueryInterval OBJECT-TYPE SYNTAX Integer32 (2..18000) MAX-ACCESS read-write STATUS current DESCRIPTION "VPLS Igmp snooping Query Interval value." DEFVAL { 125 } ::= { mplsVplsIgspCfgEntry 14 } mplsVplsIgspQueryMaxResponTime OBJECT-TYPE SYNTAX Integer32 (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "VPLS IGMP Max Query Response Time." DEFVAL { 10 } ::= { mplsVplsIgspCfgEntry 15 } mplsVplsIgspElectedQuerier OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls IGMP Elected Querier IP Address." ::= { mplsVplsIgspCfgEntry 16 } mplsVplsIgspQueryOperationalState OBJECT-TYPE SYNTAX INTEGER {querier(1), non-querier(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "VPLS IGMP Querier Operational State." ::= { mplsVplsIgspCfgEntry 17 } mplsVplsIgspBundingCtrlVlan OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to set VPLS IGMP Snooping Bunding Control Vlan. Set 0 means bundling-control-vlan untag." DEFVAL { 1 } ::= { mplsVplsIgspCfgEntry 18 } mplsVplsIgspMrouterIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsIgspMrouterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Multicast Router Interface table." ::= { mpls 82 } mplsVplsIgspMrouterIfEntry OBJECT-TYPE SYNTAX MplsVplsIgspMrouterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsIgspMrouterIfTable." INDEX { mplsVplsIgspMrouterIfVplsId , mplsVplsIgspMrouterIfIndex } ::= { mplsVplsIgspMrouterIfTable 1 } MplsVplsIgspMrouterIfEntry ::= SEQUENCE { mplsVplsIgspMrouterIfVplsId Integer32, mplsVplsIgspMrouterIfIndex Integer32, mplsVplsIgspMrouterIfRowstatus RowStatus } mplsVplsIgspMrouterIfVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsIgspMrouterIfEntry 1 } mplsVplsIgspMrouterIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { mplsVplsIgspMrouterIfEntry 2 } mplsVplsIgspMrouterIfRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsIgspMrouterIfEntry 10 } mplsVplsMrouterPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsMrouterPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP VPLS peer Multicast Router Table." ::= { mpls 83 } mplsVplsMrouterPeerEntry OBJECT-TYPE SYNTAX MplsVplsMrouterPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsMrouterPeerTable." INDEX { mplsVplsMrouterPeerVplsId , mplsVplsMrouterPeer } ::= { mplsVplsMrouterPeerTable 1 } MplsVplsMrouterPeerEntry ::= SEQUENCE { mplsVplsMrouterPeerVplsId Integer32, mplsVplsMrouterPeer OCTET STRING, mplsVplsMrouterPeerRowstatus RowStatus } mplsVplsMrouterPeerVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsMrouterPeerEntry 1 } mplsVplsMrouterPeer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for VPLS peer." ::= { mplsVplsMrouterPeerEntry 2 } mplsVplsMrouterPeerRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsMrouterPeerEntry 10 } mplsVplsIgspSgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsIgspSgIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls igmp snooping Static Group Interface Table." ::= { mpls 84 } mplsVplsIgspSgIfEntry OBJECT-TYPE SYNTAX MplsVplsIgspSgIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsIgspStaticGroupIfTable" INDEX { mplsVplsIgspSgIfVplsId , mplsVplsIgspSgIfMadd , mplsVplsIgspSgIfIndex, mplsVplsIgspSgIfSourceAdd } ::= { mplsVplsIgspSgIfTable 1 } MplsVplsIgspSgIfEntry ::= SEQUENCE { mplsVplsIgspSgIfVplsId Integer32, mplsVplsIgspSgIfMadd IpAddress, mplsVplsIgspSgIfIndex Integer32, mplsVplsIgspSgIfSourceAdd IpAddress, mplsVplsIgspSgIfRowstatus RowStatus } mplsVplsIgspSgIfVplsId OBJECT-TYPE SYNTAX Integer32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsIgspSgIfEntry 1 } mplsVplsIgspSgIfMadd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast Address to be Joined Static Group." ::= { mplsVplsIgspSgIfEntry 2 } mplsVplsIgspSgIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { mplsVplsIgspSgIfEntry 3 } mplsVplsIgspSgIfSourceAdd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static Source to be Joined Static Group." ::= { mplsVplsIgspSgIfEntry 4 } mplsVplsIgspSgIfRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsIgspSgIfEntry 10 } mplsVplsIgspSgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsIgspSgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Igsp Static Group Table of MPLS-TP VPLS peer." ::= { mpls 85 } mplsVplsIgspSgPeerEntry OBJECT-TYPE SYNTAX MplsVplsIgspSgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsIgspStaticGroupPeerTable." INDEX { mplsVplsIgspSgPeerVplsId , mplsVplsIgspSgPeerMadd , mplsVplsIgspSgPeer, mplsVplsIgspSgPeerSourceAdd} ::= { mplsVplsIgspSgPeerTable 1 } MplsVplsIgspSgPeerEntry ::= SEQUENCE { mplsVplsIgspSgPeerVplsId Integer32, mplsVplsIgspSgPeerMadd IpAddress, mplsVplsIgspSgPeer OCTET STRING, mplsVplsIgspSgPeerSourceAdd IpAddress, mplsVplsIgspSgPeerRowstatus RowStatus } mplsVplsIgspSgPeerVplsId OBJECT-TYPE SYNTAX Integer32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsIgspSgPeerEntry 1 } mplsVplsIgspSgPeerMadd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast Address to be Joined Static Group." ::= { mplsVplsIgspSgPeerEntry 2 } mplsVplsIgspSgPeer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for VPLS peer." ::= { mplsVplsIgspSgPeerEntry 3 } mplsVplsIgspSgPeerSourceAdd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static Source to be Joined Static Group." ::= { mplsVplsIgspSgPeerEntry 4 } mplsVplsIgspSgPeerRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsIgspSgPeerEntry 10 } mplsVplsIgspMaxGrpMemIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsIgspMaxGrpMemIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Max Group Member Interface table." ::= { mpls 86 } mplsVplsIgspMaxGrpMemIfEntry OBJECT-TYPE SYNTAX MplsVplsIgspMaxGrpMemIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsIgspMaxGrpMemIfTable." INDEX { mplsVplsIgspMaxGrpMemIfVplsId , mplsVplsIgspMaxGrpMemIfIndex } ::= { mplsVplsIgspMaxGrpMemIfTable 1 } MplsVplsIgspMaxGrpMemIfEntry ::= SEQUENCE { mplsVplsIgspMaxGrpMemIfVplsId Integer32, mplsVplsIgspMaxGrpMemIfIndex Integer32, mplsVplsIgspIfMaxGrpMemNum Integer32, mplsVplsIgspMaxGrpMemIfRowstatus RowStatus, mplsVplsIgspIfMaxGrpMemCount Integer32 } mplsVplsIgspMaxGrpMemIfVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsIgspMaxGrpMemIfEntry 1 } mplsVplsIgspMaxGrpMemIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { mplsVplsIgspMaxGrpMemIfEntry 2 } mplsVplsIgspIfMaxGrpMemNum OBJECT-TYPE SYNTAX Integer32 (0..16384) MAX-ACCESS read-create STATUS current DESCRIPTION "IGMP Snooping Max Allowed Group Number on this interface." ::= { mplsVplsIgspMaxGrpMemIfEntry 3 } mplsVplsIgspMaxGrpMemIfRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsIgspMaxGrpMemIfEntry 10 } mplsVplsIgspIfMaxGrpMemCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP Snooping Max Group Number Count on this interface." ::= { mplsVplsIgspMaxGrpMemIfEntry 11 } mplsVplsMaxGrpMemPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsMaxGrpMemPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP VPLS peer Multicast Router Table." ::= { mpls 87 } mplsVplsMaxGrpMemPeerEntry OBJECT-TYPE SYNTAX MplsVplsMaxGrpMemPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsMaxGrpMemPeerTable." INDEX { mplsVplsMaxGrpMemPeerVplsId , mplsVplsMaxGrpMemPeer } ::= { mplsVplsMaxGrpMemPeerTable 1 } MplsVplsMaxGrpMemPeerEntry ::= SEQUENCE { mplsVplsMaxGrpMemPeerVplsId Integer32, mplsVplsMaxGrpMemPeer OCTET STRING, mplsVplsPeerMaxGrpMemNum Integer32, mplsVplsMaxGrpMemPeerRowstatus RowStatus, mplsVplsPeerMaxGrpMemCount Integer32 } mplsVplsMaxGrpMemPeerVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsMaxGrpMemPeerEntry 1 } mplsVplsMaxGrpMemPeer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for VPLS peer." ::= { mplsVplsMaxGrpMemPeerEntry 2 } mplsVplsPeerMaxGrpMemNum OBJECT-TYPE SYNTAX Integer32 (0..16384) MAX-ACCESS read-create STATUS current DESCRIPTION "IGMP Snooping Max Allowed Group Number on this peer." ::= { mplsVplsMaxGrpMemPeerEntry 3 } mplsVplsMaxGrpMemPeerRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { mplsVplsMaxGrpMemPeerEntry 10 } mplsVplsPeerMaxGrpMemCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP Snooping Max Group Number Count on this peer." ::= { mplsVplsMaxGrpMemPeerEntry 11 } mplsVplsShowMrouterIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsShowMrouterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Multicast Router Show Interface table." ::= { mpls 88 } mplsVplsShowMrouterIfEntry OBJECT-TYPE SYNTAX MplsVplsShowMrouterIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsShowMrouterIfTable." INDEX { mplsVplsShowMrouterIfVplsId , mplsVplsShowMrouterIfIndex } ::= { mplsVplsShowMrouterIfTable 1 } MplsVplsShowMrouterIfEntry ::= SEQUENCE { mplsVplsShowMrouterIfVplsId Integer32, mplsVplsShowMrouterIfIndex Integer32, mplsVplsShowMrouterIfName OCTET STRING, mplsVplsShowMrouterIfMode INTEGER, mplsVplsShowMrouterIfUptime OCTET STRING, mplsVplsShowMrouterIfExprietime OCTET STRING } mplsVplsShowMrouterIfVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsShowMrouterIfEntry 1 } mplsVplsShowMrouterIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { mplsVplsShowMrouterIfEntry 2 } mplsVplsShowMrouterIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Name of Interface." ::= { mplsVplsShowMrouterIfEntry 3 } mplsVplsShowMrouterIfMode OBJECT-TYPE SYNTAX INTEGER {static(1), dynamic(2), both(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "The Mode of VPLS Igmp Snooping Mrouter on this Interface." ::= { mplsVplsShowMrouterIfEntry 4 } mplsVplsShowMrouterIfUptime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Uptime of VPLS Igmp Snooping Mrouter on this Interface." ::= { mplsVplsShowMrouterIfEntry 5 } mplsVplsShowMrouterIfExprietime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Exprietime of VPLS Igmp Snooping Mrouter on this Interface." ::= { mplsVplsShowMrouterIfEntry 6 } mplsVplsShowMrouterPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsShowMrouterPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Multicast Router Show Peer Table." ::= { mpls 89 } mplsVplsShowMrouterPeerEntry OBJECT-TYPE SYNTAX MplsVplsShowMrouterPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsShowMrouterPeerTable." INDEX { mplsVplsShowMrouterPeerVplsId , mplsVplsShowMrouterPeer } ::= { mplsVplsShowMrouterPeerTable 1 } MplsVplsShowMrouterPeerEntry ::= SEQUENCE { mplsVplsShowMrouterPeerVplsId Integer32, mplsVplsShowMrouterPeer OCTET STRING, mplsVplsShowMrouterPeerName OCTET STRING, mplsVplsShowMrouterPeerMode INTEGER, mplsVplsShowMrouterPeerUptime OCTET STRING, mplsVplsShowMrouterPeerExprietime OCTET STRING } mplsVplsShowMrouterPeerVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsShowMrouterPeerEntry 1 } mplsVplsShowMrouterPeer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for VPLS peer." ::= { mplsVplsShowMrouterPeerEntry 2 } mplsVplsShowMrouterPeerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Name of peer." ::= { mplsVplsShowMrouterPeerEntry 3 } mplsVplsShowMrouterPeerMode OBJECT-TYPE SYNTAX INTEGER {static(1), dynamic(2), both(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "The Mode of VPLS Igmp Snooping Mrouter on this peer." ::= { mplsVplsShowMrouterPeerEntry 4 } mplsVplsShowMrouterPeerUptime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Uptime of VPLS Igmp Snooping Mrouter on this peer." ::= { mplsVplsShowMrouterPeerEntry 5 } mplsVplsShowMrouterPeerExprietime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Exprietime of VPLS Igmp Snooping Mrouter on this peer." ::= { mplsVplsShowMrouterPeerEntry 6 } mplsVplsShowGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsShowGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Show Groups Interface table." ::= { mpls 90 } mplsVplsShowGroupIfEntry OBJECT-TYPE SYNTAX MplsVplsShowGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsShowGroupIfTable." INDEX { mplsVplsShowGroupIfVplsId , mplsVplsShowGroupIfIndex ,mplsVplsShowGroupIfAddr} ::= { mplsVplsShowGroupIfTable 1 } MplsVplsShowGroupIfEntry ::= SEQUENCE { mplsVplsShowGroupIfVplsId Integer32, mplsVplsShowGroupIfIndex Integer32, mplsVplsShowGroupIfAddr IpAddress, mplsVplsShowGroupIfName OCTET STRING, mplsVplsShowGroupIfUptime OCTET STRING, mplsVplsShowGroupIfExprietime OCTET STRING, mplsVplsShowGroupIfLastReporter IpAddress } mplsVplsShowGroupIfVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsShowGroupIfEntry 1 } mplsVplsShowGroupIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of interface." ::= { mplsVplsShowGroupIfEntry 2 } mplsVplsShowGroupIfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Group Address of VPLS Igmp Snooping Group on this Interface." ::= { mplsVplsShowGroupIfEntry 3 } mplsVplsShowGroupIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Name of Interface." ::= { mplsVplsShowGroupIfEntry 4 } mplsVplsShowGroupIfUptime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Uptime of VPLS Igmp Snooping Group on this Interface." ::= { mplsVplsShowGroupIfEntry 5 } mplsVplsShowGroupIfExprietime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Exprietime of VPLS Igmp Snooping Group on this Interface." ::= { mplsVplsShowGroupIfEntry 6 } mplsVplsShowGroupIfLastReporter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Address of VPLS Igmp Snooping Group Last Reporter on this Interface." ::= { mplsVplsShowGroupIfEntry 7 } mplsVplsShowGroupPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsVplsShowGroupPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vpls IGMP snooping Show Group Peer Table." ::= { mpls 91 } mplsVplsShowGroupPeerEntry OBJECT-TYPE SYNTAX MplsVplsShowGroupPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsVplsShowGroupPeerTable." INDEX { mplsVplsShowGroupPeerVplsId , mplsVplsShowGroupPeer ,mplsVplsShowGroupPeerAddr } ::= { mplsVplsShowGroupPeerTable 1 } MplsVplsShowGroupPeerEntry ::= SEQUENCE { mplsVplsShowGroupPeerVplsId Integer32, mplsVplsShowGroupPeer OCTET STRING, mplsVplsShowGroupPeerAddr IpAddress, mplsVplsShowGroupPeerName OCTET STRING, mplsVplsShowGroupPeerUptime OCTET STRING, mplsVplsShowGroupPeerExprietime OCTET STRING, mplsVplsShowGroupPeerLastReporter IpAddress } mplsVplsShowGroupPeerVplsId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying value for VPLS." ::= { mplsVplsShowGroupPeerEntry 1 } mplsVplsShowGroupPeer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for VPLS peer." ::= { mplsVplsShowGroupPeerEntry 2 } mplsVplsShowGroupPeerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Group Address of VPLS Igmp Snooping Group on this peer." ::= { mplsVplsShowGroupPeerEntry 3 } mplsVplsShowGroupPeerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Name of peer." ::= { mplsVplsShowGroupPeerEntry 4 } mplsVplsShowGroupPeerUptime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Uptime of VPLS Igmp Snooping Group on this peer." ::= { mplsVplsShowGroupPeerEntry 5 } mplsVplsShowGroupPeerExprietime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Exprietime of VPLS Igmp Snooping Group on this peer." ::= { mplsVplsShowGroupPeerEntry 6 } mplsVplsShowGroupPeerLastReporter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Address of VPLS Igmp Snooping Group Last Reporter on this peer." ::= { mplsVplsShowGroupPeerEntry 7 } mplsInterfaceMplsVpwsPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsInterfaceMplsVpwsPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One MPLS layer-2 virtual circuit can only band to one interface, but one interface may be banded to many VCs." ::= { mpls 92 } mplsInterfaceMplsVpwsPolicyEntry OBJECT-TYPE SYNTAX MplsInterfaceMplsVpwsPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsInterfaceMplsVpwsPolicyTable." INDEX { mplsInterfaceMplsVpwsPolicyIfIndex} ::= { mplsInterfaceMplsVpwsPolicyTable 1 } MplsInterfaceMplsVpwsPolicyEntry ::= SEQUENCE { mplsInterfaceMplsVpwsPolicyIfIndex Integer32, mplsInterfaceMplsVpwsPolicyVcName OCTET STRING, mplsInterfaceMplsVpwsPolicyName OCTET STRING, mplsInterfaceMplsVpwsPolicyStatis INTEGER, mplsInterfaceMplsVpwsPolicyRowStatus RowStatus } mplsInterfaceMplsVpwsPolicyIfIndex OBJECT-TYPE SYNTAX Integer32 (1..48) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { mplsInterfaceMplsVpwsPolicyEntry 1 } mplsInterfaceMplsVpwsPolicyVcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifying string for MPLS layer-2 virtual circuit." ::= { mplsInterfaceMplsVpwsPolicyEntry 2 } mplsInterfaceMplsVpwsPolicyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy map name." ::= { mplsInterfaceMplsVpwsPolicyEntry 3 } mplsInterfaceMplsVpwsPolicyStatis OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "State of bundling." DEFVAL { disable } ::= { mplsInterfaceMplsVpwsPolicyEntry 4 } mplsInterfaceMplsVpwsPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { mplsInterfaceMplsVpwsPolicyEntry 10 } mplsTpOAMLmmTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of mpls-tp Single-ended loss measurment message." ::= { mpls 93 } mplsTpOAMLmmEntry OBJECT-TYPE SYNTAX MplsTpOAMLmmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of mplsTpOAMLmmTable." INDEX { oamLmmIndex } ::= { mplsTpOAMLmmTable 1 } MplsTpOAMLmmEntry ::= SEQUENCE { oamLmmIndex Integer32, oamLmmServiceType INTEGER, oamLmmServiceName OCTET STRING, oamLmmRepeat Integer32, oamLmmInterval INTEGER, oamLmmRowstatus RowStatus } oamLmmIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of oam Single-ended loss measurment message.Must be 1." ::= { mplsTpOAMLmmEntry 1 } oamLmmServiceType OBJECT-TYPE SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Service type of the message." ::= { mplsTpOAMLmmEntry 2 } oamLmmServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Service name of the message." ::= { mplsTpOAMLmmEntry 3 } oamLmmRepeat OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Repeat count value to Single-ended loss measurment message." ::= { mplsTpOAMLmmEntry 4 } oamLmmInterval OBJECT-TYPE SYNTAX INTEGER {one-hundred-ms(1), one-sec(2), ten-sec(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "LMM transmission interval." DEFVAL { one-sec } ::= { mplsTpOAMLmmEntry 5 } oamLmmRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { mplsTpOAMLmmEntry 15 } mplsTpOAMLmDualTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLmDualEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM LmDual table." ::= { mpls 94 } mplsTpOAMLmDualEntry OBJECT-TYPE SYNTAX MplsTpOAMLmDualEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP LmDual entries." INDEX { mplsTpOAMLmDualMegId, mplsTpOAMLmDualIndex } ::= { mplsTpOAMLmDualTable 1 } MplsTpOAMLmDualEntry ::= SEQUENCE { mplsTpOAMLmDualMegId OCTET STRING, mplsTpOAMLmDualIndex Integer32, mplsTpOAMLmDualService INTEGER, mplsTpOAMLmDualMepId Integer32, mplsTpOAMLmDualExp Integer32, mplsTpOAMLmDualLocalLoss Integer32, mplsTpOAMLmDualLocalLossRatio Integer32, mplsTpOAMLmDualRemoteLoss Integer32, mplsTpOAMLmDualRemoteLossRatio Integer32 } mplsTpOAMLmDualMegId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMLmDualEntry 1 } mplsTpOAMLmDualIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the entry." ::= { mplsTpOAMLmDualEntry 2 } mplsTpOAMLmDualService OBJECT-TYPE SYNTAX INTEGER { section(1), lsp(2), pw-tpe(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type of the data." ::= { mplsTpOAMLmDualEntry 3 } mplsTpOAMLmDualMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID." ::= { mplsTpOAMLmDualEntry 4 } mplsTpOAMLmDualExp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Exp value, the range is 0 to 7 for cos and 8 for all-cos." ::= { mplsTpOAMLmDualEntry 5 } mplsTpOAMLmDualLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm near end loss." ::= { mplsTpOAMLmDualEntry 6 } mplsTpOAMLmDualLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualEntry 7 } mplsTpOAMLmDualRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm far end loss." ::= { mplsTpOAMLmDualEntry 8 } mplsTpOAMLmDualRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualEntry 9 } mplsTpOAMLmDualLossTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLmDualLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM LmDualLoss table." ::= { mpls 95 } mplsTpOAMLmDualLossEntry OBJECT-TYPE SYNTAX MplsTpOAMLmDualLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP LmDualLoss entries." INDEX { mplsTpOAMLmDualLossMegId } ::= { mplsTpOAMLmDualLossTable 1 } MplsTpOAMLmDualLossEntry ::= SEQUENCE { mplsTpOAMLmDualLossMegId OCTET STRING, mplsTpOAMLmDualLossMepId Integer32, mplsTpOAMLmDualLossStartTime OCTET STRING, mplsTpOAMLmDualLossEndTime OCTET STRING, mplsTpOAMLmDualStatusInterval Integer32, mplsTpOAMLmDualMaxLocalLoss Integer32, mplsTpOAMLmDualMaxLocalLossRatio Integer32, mplsTpOAMLmDualMinLocalLoss Integer32, mplsTpOAMLmDualMinLocalLossRatio Integer32, mplsTpOAMLmDualMaxRemoteLoss Integer32, mplsTpOAMLmDualMaxRemoteLossRatio Integer32, mplsTpOAMLmDualMinRemoteLoss Integer32, mplsTpOAMLmDualMinRemoteLossRatio Integer32 } mplsTpOAMLmDualLossMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMLmDualLossEntry 1 } mplsTpOAMLmDualLossMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Id." ::= { mplsTpOAMLmDualLossEntry 2 } mplsTpOAMLmDualLossStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Lm dual Start Time." ::= { mplsTpOAMLmDualLossEntry 3 } mplsTpOAMLmDualLossEndTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Lm dual End Time." ::= { mplsTpOAMLmDualLossEntry 4 } mplsTpOAMLmDualStatusInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm status interval." ::= { mplsTpOAMLmDualLossEntry 5 } mplsTpOAMLmDualMaxLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm max near end loss." ::= { mplsTpOAMLmDualLossEntry 6 } mplsTpOAMLmDualMaxLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm max near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualLossEntry 7 } mplsTpOAMLmDualMinLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm min near end loss." ::= { mplsTpOAMLmDualLossEntry 8} mplsTpOAMLmDualMinLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm min near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualLossEntry 9 } mplsTpOAMLmDualMaxRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm max far end loss." ::= { mplsTpOAMLmDualLossEntry 10 } mplsTpOAMLmDualMaxRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm max far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualLossEntry 11 } mplsTpOAMLmDualMinRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm min far end loss." ::= { mplsTpOAMLmDualLossEntry 12 } mplsTpOAMLmDualMinRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dual-lm min far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmDualLossEntry 13 } mplsTpOAMLmSingleTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLmSingleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM LmSingle table." ::= { mpls 96 } mplsTpOAMLmSingleEntry OBJECT-TYPE SYNTAX MplsTpOAMLmSingleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP LmSingle entries." INDEX { mplsTpOAMLmSingleMegId, mplsTpOAMLmSingleIndex } ::= { mplsTpOAMLmSingleTable 1 } MplsTpOAMLmSingleEntry ::= SEQUENCE { mplsTpOAMLmSingleMegId OCTET STRING, mplsTpOAMLmSingleIndex Integer32, mplsTpOAMLmSingleService INTEGER, mplsTpOAMLmSingleMepId Integer32, mplsTpOAMLmSingleExp Integer32, mplsTpOAMLmSingleLocalLoss Integer32, mplsTpOAMLmSingleLocalLossRatio Integer32, mplsTpOAMLmSingleRemoteLoss Integer32, mplsTpOAMLmSingleRemoteLossRatio Integer32 } mplsTpOAMLmSingleMegId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMLmSingleEntry 1 } mplsTpOAMLmSingleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the entry." ::= { mplsTpOAMLmSingleEntry 2 } mplsTpOAMLmSingleService OBJECT-TYPE SYNTAX INTEGER { section(1), lsp(2), pw-tpe(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service type of the data." ::= { mplsTpOAMLmSingleEntry 3 } mplsTpOAMLmSingleMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "MEP ID." ::= { mplsTpOAMLmSingleEntry 4 } mplsTpOAMLmSingleExp OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Exp value, the range is 0 to 7 for cos and 8 for all-cos." ::= { mplsTpOAMLmSingleEntry 5 } mplsTpOAMLmSingleLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm near end loss." ::= { mplsTpOAMLmSingleEntry 6 } mplsTpOAMLmSingleLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleEntry 7 } mplsTpOAMLmSingleRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm far end loss." ::= { mplsTpOAMLmSingleEntry 8 } mplsTpOAMLmSingleRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleEntry 9 } mplsTpOAMLmSingleLossTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMLmSingleLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM LmSingleLoss table." ::= { mpls 97 } mplsTpOAMLmSingleLossEntry OBJECT-TYPE SYNTAX MplsTpOAMLmSingleLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP LmSingleLoss entries." INDEX { mplsTpOAMLmSingleLossMegId } ::= { mplsTpOAMLmSingleLossTable 1 } MplsTpOAMLmSingleLossEntry ::= SEQUENCE { mplsTpOAMLmSingleLossMegId OCTET STRING, mplsTpOAMLmSingleLossMepId Integer32, mplsTpOAMLmSingleLossStartTime OCTET STRING, mplsTpOAMLmSingleLossEndTime OCTET STRING, mplsTpOAMLmSingleMaxLocalLoss Integer32, mplsTpOAMLmSingleMaxLocalLossRatio Integer32, mplsTpOAMLmSingleMinLocalLoss Integer32, mplsTpOAMLmSingleMinLocalLossRatio Integer32, mplsTpOAMLmSingleMaxRemoteLoss Integer32, mplsTpOAMLmSingleMaxRemoteLossRatio Integer32, mplsTpOAMLmSingleMinRemoteLoss Integer32, mplsTpOAMLmSingleMinRemoteLossRatio Integer32 } mplsTpOAMLmSingleLossMegId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMLmSingleLossEntry 1 } mplsTpOAMLmSingleLossMepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mep Id." ::= { mplsTpOAMLmSingleLossEntry 2 } mplsTpOAMLmSingleLossStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Lm Single Start Time." ::= { mplsTpOAMLmSingleLossEntry 3 } mplsTpOAMLmSingleLossEndTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "Lm Single End Time." ::= { mplsTpOAMLmSingleLossEntry 4 } mplsTpOAMLmSingleMaxLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm max near end loss." ::= { mplsTpOAMLmSingleLossEntry 5 } mplsTpOAMLmSingleMaxLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm max near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleLossEntry 6 } mplsTpOAMLmSingleMinLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm min near end loss." ::= { mplsTpOAMLmSingleLossEntry 7} mplsTpOAMLmSingleMinLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm min near end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleLossEntry 8 } mplsTpOAMLmSingleMaxRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm max far end loss." ::= { mplsTpOAMLmSingleLossEntry 9 } mplsTpOAMLmSingleMaxRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm max far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleLossEntry 10 } mplsTpOAMLmSingleMinRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm min far end loss." ::= { mplsTpOAMLmSingleLossEntry 11 } mplsTpOAMLmSingleMinRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm min far end loss ratio, the range is 0 - 1000000, unit is one in a million." ::= { mplsTpOAMLmSingleLossEntry 12 } mplsTpOAMSingleLMCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTpOAMSingleLMCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP OAM single lm cache table." ::= { mpls 100 } mplsTpOAMSingleLMCacheEntry OBJECT-TYPE SYNTAX MplsTpOAMSingleLMCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS-TP single lm cache entries." INDEX { mplsTpOAMSingleLMCacheMegId, mplsTpOAMSingleLMCacheIndex } ::= { mplsTpOAMSingleLMCacheTable 1 } MplsTpOAMSingleLMCacheEntry ::= SEQUENCE { mplsTpOAMSingleLMCacheMegId OCTET STRING, mplsTpOAMSingleLMCacheIndex Integer32, mplsTpOAMSingleLMCacheExpValue Integer32, mplsTpOAMSingleLMCacheLocalLoss Integer32, mplsTpOAMSingleLMCacheLocalLossRatio Integer32, mplsTpOAMSingleLMCacheRemoteLoss Integer32, mplsTpOAMSingleLMCacheRemoteLossRatio Integer32, mplsTpOAMSingleLMCacheTime OCTET STRING } mplsTpOAMSingleLMCacheMegId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEG ID." ::= { mplsTpOAMSingleLMCacheEntry 1 } mplsTpOAMSingleLMCacheIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the entry." ::= { mplsTpOAMSingleLMCacheEntry 2 } mplsTpOAMSingleLMCacheExpValue OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Exp value, the range is 0 to 7 for cos and 8 for all-cos." ::= { mplsTpOAMSingleLMCacheEntry 3 } mplsTpOAMSingleLMCacheLocalLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm near end loss." ::= { mplsTpOAMSingleLMCacheEntry 4 } mplsTpOAMSingleLMCacheLocalLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm near end loss ratio, the range is 1 - 1000000, unit is one in a million." ::= { mplsTpOAMSingleLMCacheEntry 5 } mplsTpOAMSingleLMCacheRemoteLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm far end loss." ::= { mplsTpOAMSingleLMCacheEntry 6 } mplsTpOAMSingleLMCacheRemoteLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Single-lm far end loss ratio, the range is 1 - 1000000, unit is one in a million." ::= { mplsTpOAMSingleLMCacheEntry 7 } mplsTpOAMSingleLMCacheTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Cache time." ::= { mplsTpOAMSingleLMCacheEntry 8 } mplsTrapGroup OBJECT IDENTIFIER ::= { mpls 1000 } tpOAMEventTrap NOTIFICATION-TYPE OBJECTS { mplsTpOAMEventService, mplsTpOAMEventMegId, mplsTpOAMEventMepId, mplsTpOAMEventId, mplsTpOAMEventAction } STATUS current DESCRIPTION "Mpls-tp OAM event." ::= { mplsTrapGroup 1 } mplsTunnelSwitch NOTIFICATION-TYPE OBJECTS { mplsTunnelSelectedLspPe, mplsTunnelG8131CurrentState } STATUS current DESCRIPTION "Lsp switchover of mpls tunnel." ::= { mplsTrapGroup 2 } mplsTPVpwsSwitch NOTIFICATION-TYPE OBJECTS { mplsTPVpwsSelectedPw, mplsTPVpwsG8131CurrentState } STATUS current DESCRIPTION "PW switchover of mpls-tp vpws." ::= { mplsTrapGroup 3 } mplsVplsTPPeerSwitch NOTIFICATION-TYPE OBJECTS { mplsVplsTPPeerSelectedPw, mplsVplsTPPeerG8131CurrentState } STATUS current DESCRIPTION "PW switchover of mpls-tp vpls peer." ::= { mplsTrapGroup 4 } mplsVpwsStateChange NOTIFICATION-TYPE OBJECTS { mplsVpwsState } STATUS current DESCRIPTION "Active or inactive of vpws." ::= { mplsTrapGroup 5 } mplsVplsPeerStateChange NOTIFICATION-TYPE OBJECTS { mplsVplsPeerState } STATUS current DESCRIPTION "Active or inactive of vpls peer." ::= { mplsTrapGroup 6 } mplsVpwsOAMCsfStateChange NOTIFICATION-TYPE OBJECTS { mplsTPVpwsOAMCsfSrvState, mplsTPVpwsOAMCsfClientState, mplsTPVpwsOAMCsfDCReason, mplsTPVpwsOAMCsfClientInterval } STATUS current DESCRIPTION "Vpws OAM csf state change." ::= { mplsTrapGroup 7 } tpOAMSingleLmLocalLossTrap NOTIFICATION-TYPE OBJECTS { mplsTpOAMSingleLMCacheLocalLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime} STATUS current DESCRIPTION "Single lm local loss reaches threshold." ::= { mplsTrapGroup 8 } tpOAMSingleLmLocalLossClearTrap NOTIFICATION-TYPE OBJECTS { mplsTpOAMSingleLMCacheLocalLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime} STATUS current DESCRIPTION "Single lm local loss reaches threshold." ::= { mplsTrapGroup 9 } tpOAMSingleLmRemoteLossTrap NOTIFICATION-TYPE OBJECTS { mplsTpOAMSingleLMCacheRemoteLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime} STATUS current DESCRIPTION "Single lm local loss reaches threshold." ::= { mplsTrapGroup 10 } tpOAMSingleLmRemoteLossClearTrap NOTIFICATION-TYPE OBJECTS { mplsTpOAMSingleLMCacheRemoteLoss, mplsTpOAMSingleLMCacheRemoteLossRatio, mplsTpOAMSingleLMCacheTime} STATUS current DESCRIPTION "Single lm local loss reaches threshold." ::= { mplsTrapGroup 11 } writeSuccessTrap NOTIFICATION-TYPE OBJECTS { configSave } STATUS current DESCRIPTION "Config write success" ::= { sysTrap 1 } writeFailureTrap NOTIFICATION-TYPE OBJECTS { configSave } STATUS current DESCRIPTION "Config write failure" ::= { sysTrap 2 } rebootSendTrap NOTIFICATION-TYPE OBJECTS { reload } STATUS current DESCRIPTION "Reload send trap" ::= { sysTrap 3 } memUsageHigher NOTIFICATION-TYPE OBJECTS { memTotalFree } STATUS current DESCRIPTION "Memory usage higher" ::= { sysTrap 4 } memUsageFormHigherToNormal NOTIFICATION-TYPE OBJECTS { memTotalFree } STATUS current DESCRIPTION "Memory usage from higher to normal" ::= { sysTrap 5 } vtySessionStartTrap NOTIFICATION-TYPE OBJECTS { usersLineIndex, usersname, usersLocation } STATUS current DESCRIPTION "Virtual terminal session start" ::= { sysTrap 6 } vtySessionStopTrap NOTIFICATION-TYPE OBJECTS { usersLineIndex, usersname, usersLocation } STATUS current DESCRIPTION "Virtual terminal session stop" ::= { sysTrap 7 } timeChangeTrap NOTIFICATION-TYPE OBJECTS { timeSetClock, timeSetMonth, timeSetDay, timeSetYear } STATUS current DESCRIPTION "Time Change Trap" ::= { sysTrap 8 } cpuUsageHigher NOTIFICATION-TYPE OBJECTS { ssCpuIdle } STATUS current DESCRIPTION "Cpu Usage higher" ::= { sysTrap 9 } cpuUsageFormHigherToNormal NOTIFICATION-TYPE OBJECTS { ssCpuIdle } STATUS current DESCRIPTION "Cpu Usage from higher to normal" ::= { sysTrap 10 } lastCommandTrap NOTIFICATION-TYPE OBJECTS { lastCommand } STATUS current DESCRIPTION "The trap of the last command line and time. The command must be a legal and configure command." ::= { sysTrap 11 } cFInserted NOTIFICATION-TYPE OBJECTS { cfIndex } STATUS current DESCRIPTION "Insert CF card." ::= { sysTrap 12 } cFRemoved NOTIFICATION-TYPE OBJECTS { cfIndex } STATUS current DESCRIPTION "Remove CF card." ::= { sysTrap 13 } loginFailTrap NOTIFICATION-TYPE OBJECTS { loginFail } STATUS current DESCRIPTION "Login fail for three times." ::= { sysTrap 14 } processDumpTrap NOTIFICATION-TYPE OBJECTS { lastDumpedProcess } STATUS current DESCRIPTION "The trap of the last dumped process id." ::= { sysTrap 15 } -- Sub Module: SMART-LINK -- -- Node definitions -- smartlinkRelayEnable OBJECT-TYPE SYNTAX INTEGER {enabled(1),disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Relay flush packet is enabled on the device or not. The meanings of the values are: enabled(1) - Enable smart-link relay; disabled(2) - Disable smart-link relay;" ::= { smartlink 1 } smartlinkClearStatistic OBJECT-TYPE SYNTAX INTEGER { yes(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Clear the statistic infomation smart link module. The meanings of the values are: YES(1) - Clear it;" ::= { smartlink 2 } -- smartlinkGroupTable smartlinkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SmartlinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains smart-link group information." ::= { smartlink 3 } smartlinkGroupEntry OBJECT-TYPE SYNTAX SmartlinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of smart-link group information " INDEX { smartlinkGroupindex } ::= { smartlinkGroupTable 1 } SmartlinkGroupEntry ::= SEQUENCE { smartlinkGroupindex INTEGER, smartlinkGroupRowStatus RowStatus, smartlinkGroupMasterIntf InterfaceIndex, smartlinkGroupMasterDnCnt INTEGER, smartlinkGroupMasterlstDnTime OCTET STRING, smartlinkGroupMasterflhCnt INTEGER, smartlinkGroupMasterlstflhTime OCTET STRING, smartlinkGroupSlaveIntf InterfaceIndex, smartlinkGroupSlaveDnCnt INTEGER, smartlinkGroupSlavelstDnTime OCTET STRING, smartlinkGroupSlaveflhCnt INTEGER, smartlinkGroupSlavelstflhTime OCTET STRING, smartlinkGroupMstpInstance OCTET STRING, smartlinkGroupLoadBalanceInstance OCTET STRING, smartlinkGroupRestoreEnable INTEGER, smartlinkGroupRestoreTime INTEGER, smartlinkGroupControlVlan INTEGER, smartlinkGroupControlVlanPassword OCTET STRING, smartlinkGroupEnable INTEGER } smartlinkGroupindex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an group in the smart link table." ::= { smartlinkGroupEntry 1 } smartlinkGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { smartlinkGroupEntry 2 } smartlinkGroupMasterIntf OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of the port for which this smart-link contains master interface. 0 means delete" ::= { smartlinkGroupEntry 3 } smartlinkGroupMasterDnCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master down count." ::= { smartlinkGroupEntry 4 } smartlinkGroupMasterlstDnTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master last down time." ::= { smartlinkGroupEntry 5 } smartlinkGroupMasterflhCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master flush count." ::= { smartlinkGroupEntry 6 } smartlinkGroupMasterlstflhTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master last flush time." ::= { smartlinkGroupEntry 7 } smartlinkGroupSlaveIntf OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of the port for which this smart-link contains slave interface. 0 means delete" ::= { smartlinkGroupEntry 8 } smartlinkGroupSlaveDnCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master down count." ::= { smartlinkGroupEntry 9 } smartlinkGroupSlavelstDnTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master last down time." ::= { smartlinkGroupEntry 10 } smartlinkGroupSlaveflhCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master flush count." ::= { smartlinkGroupEntry 11 } smartlinkGroupSlavelstflhTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link master last flush time." ::= { smartlinkGroupEntry 12 } smartlinkGroupMstpInstance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4094)) MAX-ACCESS read-write STATUS current DESCRIPTION "Protected mstp instance ID. -1 means delete" ::= { smartlinkGroupEntry 13 } smartlinkGroupLoadBalanceInstance OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4094)) MAX-ACCESS read-write STATUS current DESCRIPTION "Load-balance instance ID. -1 means delete" ::= { smartlinkGroupEntry 14 } smartlinkGroupRestoreEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Auto-restore of the smart link group is enabled on the device or not. The meanings of the values are: enabled(1) - Enable auto-restore of the smart link group; disabled(2) - Disable auto-restore of the smart link group;" ::= { smartlinkGroupEntry 15 } smartlinkGroupRestoreTime OBJECT-TYPE SYNTAX INTEGER(30..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "The time range(Second) of Restore time. Range <30-1200>" ::= { smartlinkGroupEntry 16 } smartlinkGroupControlVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id of the smart-link control vlan. Set 0 to delete the control vlan." ::= { smartlinkGroupEntry 17 } smartlinkGroupControlVlanPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password of the smart-link control vlan. By default the password is 'default'" DEFVAL {"default"} ::= { smartlinkGroupEntry 18 } smartlinkGroupEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of smart-link group . The meanings of the values are: enabled(1) - Enable smart-link group; disabled(2) - Disable smart-link group;" ::= { smartlinkGroupEntry 19 } -- smartlinkRcvFlushintfTable smartlinkRcvFlushintfTable OBJECT-TYPE SYNTAX SEQUENCE OF SmartlinkRcvFlushintfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains smart-link group information." ::= { smartlink 4 } smartlinkRcvFlushintfEntry OBJECT-TYPE SYNTAX SmartlinkRcvFlushintfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of smart-link group information. " INDEX { smartlinkGroupindex } ::= { smartlinkRcvFlushintfTable 1 } SmartlinkRcvFlushintfEntry ::= SEQUENCE { smartlinkRcvFlushintfindex InterfaceIndex, smartlinkRcvFlushintfVlan INTEGER, smartlinkRcvFlushintfVlanPassword OCTET STRING, martlinkRcvFlushintfSetState RowStatus } smartlinkRcvFlushintfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface which smart-link receive flush from." ::= { smartlinkRcvFlushintfEntry 1 } smartlinkRcvFlushintfVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan id of the interface which smart-link receive flush from." ::= { smartlinkRcvFlushintfEntry 2 } smartlinkRcvFlushintfVlanPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password of the interface which smart-link receive flush from." ::= { smartlinkRcvFlushintfEntry 3 } martlinkRcvFlushintfSetState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { smartlinkRcvFlushintfEntry 4 } -- smartlinkRcvFlushPktNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link received flush packet number." ::= { smartlink 5 } smartlinkProcFlushPktNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Smart-link processed flush packet number." ::= { smartlink 6 } --flowctrl OBJECT IDENTIFIER ::= { OID 71 } -- Sub Module: FLOW-CONTROL -- -- Node definitions -- -- flowctrlSendEnableTable flowctrlSendEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF FlowctrlSendEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enable or disable flow control send function. The meanings of the values are: on(1) - Set send flowcontrol enable; off(2) - Set send flowcontrol disable; Default setting is off(2)." ::= { flowctrl 1 } flowctrlSendEnableEntry OBJECT-TYPE SYNTAX FlowctrlSendEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of flowctrl Send Enable group information. " INDEX { interfaceIndex } ::= { flowctrlSendEnableTable 1 } FlowctrlSendEnableEntry ::= SEQUENCE { flowctrlSendEnable INTEGER } flowctrlSendEnable OBJECT-TYPE SYNTAX INTEGER {on(1),off(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable flow control send function. The meanings of the values are: on(1) - Set send flowcontrol enable; off(2) - Set send flowcontrol disable; Default setting is off(2." DEFVAL { 2 } ::= { flowctrlSendEnableEntry 1 } -- flowctrlReceiveEnableTable flowctrlReceiveEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF FlowctrlReceiveEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enable or disable flow control Receive function. The meanings of the values are: on(1) - Set Receive flowcontrol enable; off(2) - Set Receive flowcontrol disable; Default setting is off(2)." ::= { flowctrl 2 } flowctrlReceiveEnableEntry OBJECT-TYPE SYNTAX FlowctrlReceiveEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of smart-link group information " INDEX { interfaceIndex } ::= { flowctrlReceiveEnableTable 1 } FlowctrlReceiveEnableEntry ::= SEQUENCE { flowctrlReceiveEnable INTEGER } flowctrlReceiveEnable OBJECT-TYPE SYNTAX INTEGER {on(1),off(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable flow control Receive function. The meanings of the values are: on(1) - Set Receive flowcontrol enable; off(2) - Set Receive flowcontrol disable; Default setting is off(2)." DEFVAL { 2 } ::= { flowctrlReceiveEnableEntry 1 } --cputraffic OBJECT IDENTIFIER ::= { OID 72 } -- Sub Module: CPU-TRAFFIC -- -- Node definitions -- cputrafficLimitTotalRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the total rate of all streams destined to CPU. Value range 0~1000000 pps. Default 2048 pps" DEFVAL { 2048 } ::= { cputraffic 1 } cputrafficLimitReasonRate OBJECT IDENTIFIER ::= { cputraffic 2 } arpReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Address Resolution Protocol. Rate range 0~1000000. Default value 256 pps." DEFVAL { 256 } ::= { cputrafficLimitReasonRate 1 } bpduReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Bridge Protocol Data Unit. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 2 } cfmReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Connectivity Fault Management. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 3 } dhcpReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Dynamic Host Configuration Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 4 } eapolReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Extensible Authentication Protocol Over Lan. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 5 } erpsReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Ethernet Ring Protection Switching. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 6 } sflowIngressReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Sampled flow at ingress direction. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 7 } icmpRedirectReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " ICMP Redirect. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 8 } --icmpV6ReasonRate OBJECT-TYPE -- SYNTAX INTEGER (1..1000000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " Internet Control Message Protocol Version 6. -- Rate range 0~1000000. -- Default value 500 kbps." -- DEFVAL { 500 } -- ::= { cputrafficLimitReasonRate 9 } igmpReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " IGMP/IGMP Snooping Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 9 } ipOptionReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Packets with IP Option. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 10 } ipDaReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " IP Destination to Router-self. Rate range 0~1000000. Default value 1024 pps." DEFVAL { 1024 } ::= { cputrafficLimitReasonRate 11 } ldpReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Label Distribution Protocol. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 12 } macSaMismatchReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Security for source mac learned. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 13 } mcastRpfFailReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Multicast with rpf fail or first multicast packet. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 14 } mplsTtlFailReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Mpls Packets with ttl fail. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 15 } mtuDontFragReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Fragment with Flag dont-frag Set. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 16 } mtuFragReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Need Fragment. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 17 } ospfReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Open Shortest Path First. Rate range 0~1000000. Default value 256 pps." DEFVAL { 256 } ::= { cputrafficLimitReasonRate 18 } pimReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Protocol Independent Multicast. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 19 } portSecurityDiscardReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Security for exceeding fdb maxnum. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 20 } ptpReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Precision Time Synchronization Protocol. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 21 } ripReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Routing Information Protocol. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 22 } rsvpReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Resource Reservation Protocol. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 23 } slowProtoReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Slow Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 24 } smartLinkReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Smart Link Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 25 } ucastIpTtlFailReasonRate OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Unicast Packets with ttl fail. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 26 } vlanSecurityDiscardReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Vlan Security for exceeding fdb maxnum. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 27 } vrrpReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Virtual Router Redundancy Protocol. Rate range 0~1000000. Default value 512 pps." DEFVAL { 512 } ::= { cputrafficLimitReasonRate 28 } mldReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " MLD/MLD Snooping Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 29 } sflowEgressReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Sampled flow at egress direction. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 30 } udldReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Unidirectional Link Detection Protocol. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 31 } fwdToCpuReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Packets forwarding to cpu. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 32 } mplsTpPwOamReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " MPLS-TP-OAM for PW. Rate range 0~1000000. Default value 128 pps." DEFVAL { 128 } ::= { cputrafficLimitReasonRate 33 } dot1xMacBypassReasonRate OBJECT-TYPE SYNTAX INTEGER (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Dot1x Mac Auth Bypass. Rate range 0~1000000. Default value 64 pps." DEFVAL { 64 } ::= { cputrafficLimitReasonRate 34 } cputrafficLimitReasonClass OBJECT IDENTIFIER ::= { cputraffic 3 } arpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Address Resolution Protocol. Class range 0~3. Default Class is 1 ." DEFVAL { 1 } ::= { cputrafficLimitReasonClass 1 } bpduReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Bridge Protocol Data Unit. Class range 0~3. Default Class is 3 " DEFVAL { 3 } ::= { cputrafficLimitReasonClass 2 } cfmReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Connectivity Fault Management. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 3 } dhcpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Dynamic Host Configuration Protocol. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 4 } eapolReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Extensible Authentication Protocol Over Lan. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 5 } erpsReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Ethernet Ring Protection Switching. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 6 } sflowIngressReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Sampled flow at ingress direction. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 7 } icmpRedirectReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " ICMP Redirect. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 8 } --icmpV6ReasonClass OBJECT-TYPE -- SYNTAX INTEGER (0..3) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " Internet Control Message Protocol Version 6. -- Class range 0~3. -- Default Class is 1. " -- DEFVAL { 1 } -- ::= { cputrafficLimitReasonClass 9 } igmpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " IGMP/IGMP Snooping Protocol. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 9 } ipOptionReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Packets with IP Option. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 10 } ipDaReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " IP Destination to Router-self. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 11 } ldpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Label Distribution Protocol. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 12 } macSaMismatchReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Security for source mac learned. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 13 } mcastRpfFailReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Multicast with rpf fail or first multicast packet. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 14 } --mcastTtlReasonClass OBJECT-TYPE -- SYNTAX INTEGER (0..3) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " Multicast Packets with ttl fail. -- Class range 0~3. -- Default Class is 0. " -- DEFVAL { 0 } -- ::= { cputrafficLimitReasonClass 15 } mplsTtlFailReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Mpls Packets with ttl fail. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 15 } mtuDontFragReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Fragment with Flag dont-frag Set. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 16 } mtuFragReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Need Fragment. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 17 } ospfReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Open Shortest Path First. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 18 } pimReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Protocol Independent Multicast. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 19 } portSecurityDiscardReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Port Security for exceeding fdb maxnum. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 20 } ptpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Precision Time Synchronization Protocol. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 21 } ripReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Routing Information Protocol. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 22 } rsvpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Resource Reservation Protocol. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 23 } slowProtoReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Slow Protocol. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 24 } smartLinkReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Smart Link Protocol. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 25 } ucastIpTtlFailReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Unicast Packets with ttl fail. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 26 } vlanSecurityDiscardReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Vlan Security for exceeding fdb maxnum. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 27 } vrrpReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Virtual Router Redundancy Protocol. Class range 0~3. Default Class is 1. " DEFVAL { 1 } ::= { cputrafficLimitReasonClass 28 } mldReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " MLD/MLD Snooping Protocol. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 29 } sflowEgressReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Sampled flow at egress direction. Class range 0~3. Default Class is 0. " DEFVAL { 0 } ::= { cputrafficLimitReasonClass 30 } udldReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Sampled flow at egress direction. Class range 0~3. Default Class is 3. " DEFVAL { 3 } ::= { cputrafficLimitReasonClass 31 } mplsTpPwOamReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " MPLS-TP-OAM for PW. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 33 } dot1xMacBypassReasonClass OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Dot1x Mac Auth Bypass. Class range 0~3. Default Class is 2. " DEFVAL { 2 } ::= { cputrafficLimitReasonClass 34 } -- Sub Module: PORT-ISOLATE -- portisolate OBJECT IDENTIFIER ::= { OID 73 } -- -- Node definitions -- portIsolateMode OBJECT-TYPE SYNTAX INTEGER {l2(1),all(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set isolate mode on the switch The default setting is l2. The meanings of the values are: l2(1) - Isolate bridged packets; all(2) - Isolate bridged packtes and routed packets;" DEFVAL { all } ::= { portisolate 1 } -- Sub Module: PHY-LOOKBACK -- phyloopback OBJECT IDENTIFIER ::= { OID 74 } -- -- Node definitions -- -- phyloopbackTable phyloopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF PhyloopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains phy-loopback internal group information." ::= { phyloopback 1 } phyloopbackEntry OBJECT-TYPE SYNTAX PhyloopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of phy-loopback internal group information " INDEX { phyloopbackIfindex } ::= { phyloopbackTable 1 } PhyloopbackEntry ::= SEQUENCE { phyloopbackIfindex INTEGER, phyloopbackType INTEGER, phyloopbackDstIfindex INTEGER, phyloopbackMacAddrSwap INTEGER, phyloopbackRowStatus RowStatus } phyloopbackIfindex OBJECT-TYPE SYNTAX INTEGER (1..52) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of interface that uniquely identifies an phyloopback entry in the phyloopback table." ::= { phyloopbackEntry 1 } phyloopbackType OBJECT-TYPE SYNTAX INTEGER {internal(0), external(1), port(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Phy loopback commands type. internal(0), external(1), port(2). " ::= { phyloopbackEntry 2 } phyloopbackDstIfindex OBJECT-TYPE SYNTAX INTEGER (1..52) MAX-ACCESS read-write STATUS current DESCRIPTION "An index that uniquely identifies phyloopback destination physical interface." ::= { phyloopbackEntry 3 } phyloopbackMacAddrSwap OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The packet's SMAC incoming from port level loopback interface will be swaped with it's DMAC, and the FCS will be updated. enable(1), disable(2). Default setting is disable(2). For other types, should always be disable(2)." ::= { phyloopbackEntry 4 } phyloopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { phyloopbackEntry 5 } -- Sub Module: Monitor link monitorLinkRecoverTime OBJECT-TYPE SYNTAX Integer32 (3..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the recover time for down_link port, when the up_link up." DEFVAL { 3 } ::= { monitorlink 1 } monitorLinkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MonitorLinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Monitor link group." ::= { monitorlink 2 } monitorLinkGroupEntry OBJECT-TYPE SYNTAX MonitorLinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of Monitor link group." INDEX { groupIndex} ::= { monitorLinkGroupTable 1 } MonitorLinkGroupEntry ::= SEQUENCE { groupIndex Integer32, groupStatus INTEGER, groupRowStatus RowStatus } groupIndex OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Monitor link group. The index value is group id minus 1." ::= { monitorLinkGroupEntry 1 } groupStatus OBJECT-TYPE SYNTAX INTEGER {up(1), down(2), idle(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of group." ::= { monitorLinkGroupEntry 2 } groupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize Destroy and Active." ::= { monitorLinkGroupEntry 3 } monitorLinkMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF MonitorLinkMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Monitor link member." ::= { monitorlink 3 } monitorLinkMemberEntry OBJECT-TYPE SYNTAX MonitorLinkMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of Monitor link member." INDEX { groupIndex, memberLinkType, memberIndex} ::= { monitorLinkMemberTable 1 } MonitorLinkMemberEntry ::= SEQUENCE { memberLinkType INTEGER, memberIndex Integer32, memberType INTEGER, memberIdentify Integer32, memberUptime TimeTicks, memberDowntime TimeTicks, memberUpCounter Counter32, memberDownCounter Counter32, memberRowStatus RowStatus } memberLinkType OBJECT-TYPE SYNTAX INTEGER {up-link(0), down-link(1)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Monitor link member." ::= { monitorLinkMemberEntry 1 } memberIndex OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Monitor link member." ::= { monitorLinkMemberEntry 2 } memberType OBJECT-TYPE SYNTAX INTEGER {smart-link(0), interface(1)} MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Monitor link member. Type of smart-link can only used as up-link." ::= { monitorLinkMemberEntry 3 } memberIdentify OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "If the memberType type is interface, this value should be ifindex. if the memberType type is smart-link, this value should be smartlinkGroupindex." ::= { monitorLinkMemberEntry 4 } memberUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last-up-time of member." ::= { monitorLinkMemberEntry 5 } memberDowntime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last-down-time of member." ::= { monitorLinkMemberEntry 6 } memberUpCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter of up time of the member." ::= { monitorLinkMemberEntry 7 } memberDownCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TThe counter of down time of the member." ::= { monitorLinkMemberEntry 8 } memberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize Destroy and Active." ::= { monitorLinkMemberEntry 9 } -- Sub Module: UDLD -- udld OBJECT IDENTIFIER ::= { OID 76 } -- -- Node definitions -- udldGlobalState OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set UDLD global state.The meanings of the values are: enable(1) - Globally enable UDLD; disable(2) - Globally disable UDLD;" DEFVAL { disable } ::= { udld 1 } udldMsgInterval OBJECT-TYPE SYNTAX INTEGER (1..90) MAX-ACCESS read-write STATUS current DESCRIPTION "Set UDLD message interval.The default value is 15 seconds." DEFVAL { 15 } ::= { udld 2 } udldOperate OBJECT-TYPE SYNTAX INTEGER {reset(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "UDLD global operations.The meanings of the values are: reset(1) - Reset the interfaces disabled by UDLD;" ::= { udld 3 } udldIfTable OBJECT-TYPE SYNTAX SEQUENCE OF UDLDIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains UDLD interface information." ::= { udld 4 } udldIfEntry OBJECT-TYPE SYNTAX UDLDIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of UDLD interface information " INDEX { udldIfIndex } ::= { udldIfTable 1 } UDLDIfEntry ::= SEQUENCE { udldIfIndex Integer32, udldIfName OCTET STRING, udldState INTEGER, udldLinkState INTEGER } udldIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { udldIfEntry 1 } udldIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { udldIfEntry 2 } udldState OBJECT-TYPE SYNTAX INTEGER {disable(1),normal(2),aggressive(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "UDLD state of an interface.The meanings of the values are: disable(0) - Disable UDLD; normal(1) - Enable UDLD normal mode; aggressive(2) - Enable UDLD aggressive mode;" DEFVAL { disable } ::= { udldIfEntry 3 } udldLinkState OBJECT-TYPE SYNTAX INTEGER {linkUp(0),unknown(1),detection(2),exDetection(3),bidirectional(4),unidirectional(5),selfLoop(7),linkdown(8),inActive(9)} MAX-ACCESS read-only STATUS current DESCRIPTION "UDLD operation state of an interface." ::= { udldIfEntry 4 } -- Sub Module: POLICYBASEDROUTING -- -- Nodes of policyBaseRoutingIpPolicyRouteMap entry table -- pbrTable OBJECT-TYPE SYNTAX SEQUENCE OF PBREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "table of Policy based routing entry." ::= { policyBasedRouting 1 } pbrEntry OBJECT-TYPE SYNTAX PBREntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy based routing entry" INDEX { pbrIfIndex} ::= { pbrTable 1 } PBREntry ::= SEQUENCE { pbrIfIndex Integer32, pbrPolicyRmapName OCTET STRING, pbrRowStatus RowStatus } pbrIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface index which is applying the policy route-map." ::= { pbrEntry 1 } pbrPolicyRmapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "pbr policy route-map name." ::= { pbrEntry 2 } pbrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { pbrEntry 9} -- Sub Module: DDOS prevent -- ddos OBJECT IDENTIFIER ::= { OID 78 } -- -- Node definitions -- ddosICMPIntercept OBJECT-TYPE SYNTAX Integer32 (-1|0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip ICMP intercept maxcount.The meanings of the values are: -1 - no Ip ICMP intercept; 0-1000 - Ip ICMP intercept maxcount." DEFVAL { -1 } ::= { ddos 1 } ddosUDPIntercept OBJECT-TYPE SYNTAX Integer32 (-1|0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip UDP intercept maxcount.The meanings of the values are: -1 - no Ip UDP intercept; 0-1000 - Ip UDP intercept maxcount." DEFVAL { -1 } ::= { ddos 2 } ddosTCPIntercept OBJECT-TYPE SYNTAX Integer32 (-1|0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip TCP intercept maxcount.The meanings of the values are: -1 - no Ip TCP intercept; 0-1000 - Ip TCP intercept maxcount." DEFVAL { -1 } ::= { ddos 3 } ddosSmurfIntercept OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip Smurf intercept maxcount.The meanings of the values are: enable(1) - Ip Fraggle intercept; disable(2) - no Ip Fraggle intercept." DEFVAL { disable } ::= { ddos 4 } ddosSmalpktIntercept OBJECT-TYPE SYNTAX Integer32 (-1|28..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip Small-packet intercept maxcount.The meanings of the values are: -1 - no Ip Small-packet intercept; 28-65535 - Ip Small-packet intercept maxlength." DEFVAL { -1 } ::= { ddos 5 } ddosFraggleIntercept OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip Fraggle intercept.The meanings of the values are: enable(1) - Ip Fraggle intercept; disable(2) - no Ip Fraggle intercept." DEFVAL { disable } ::= { ddos 6 } ddosIpeqIntercept OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip Ipeq intercept.The meanings of the values are: enable(1) - Ip Ipeq intercept; disable(2) - no Ip Ipeq intercept." DEFVAL { disable } ::= { ddos 7 } ddosMaceqIntercept OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set Ip Maceq intercept.The meanings of the values are: enable(1) - Ip Maceq intercept; disable(2) - no Ip Maceq intercept." DEFVAL { disable } ::= { ddos 8 } ddosSmalPktStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist Small-packet Attack packets number." DEFVAL { 0 } ::= { ddos 9 } ddosICMPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist ICMP Flood packets number." DEFVAL { 0 } ::= { ddos 10 } ddosSmurfStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist Smurf Attack packets number." DEFVAL { 0 } ::= { ddos 11 } ddosTCPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist SYN Flood packets number." DEFVAL { 0 } ::= { ddos 12 } ddosFraggleStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist Fraggle Attack packets number." DEFVAL { 0 } ::= { ddos 13 } ddosUDPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist UDP Flood packets number." DEFVAL { 0 } ::= { ddos 14 } ddosClearStatistic OBJECT-TYPE SYNTAX INTEGER {clearStatistic(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear IP intercept Statistic.1:clear statistic. " ::= { ddos 15 } ddosmgifSmalPktStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if Small-packet Attack packets number." DEFVAL { 0 } ::= { ddos 16 } ddosmgifICMPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if ICMP Flood packets number." DEFVAL { 0 } ::= { ddos 17 } ddosmgifSmurfStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if Smurf Attack packets number." DEFVAL { 0 } ::= { ddos 18 } ddosmgifTCPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if SYN Flood packets number." DEFVAL { 0 } ::= { ddos 19 } ddosmgifFraggleStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if Fraggle Attack packets number." DEFVAL { 0 } ::= { ddos 20 } ddosmgifUDPStatistic OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show Resist mgmt-if UDP Flood packets number." DEFVAL { 0 } ::= { ddos 21 } -- l2ping OBJECT IDENTIFIER ::= { OID 79 } l2PingResponseTable OBJECT-TYPE SYNTAX SEQUENCE OF L2PingResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains l2 ping response information." ::= { l2ping 1 } l2PingResponseEntry OBJECT-TYPE SYNTAX L2PingResponseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface l2ping response information" INDEX { l2pingResponseIfindex } ::= { l2PingResponseTable 1 } L2PingResponseEntry ::= SEQUENCE { l2pingResponseIfindex INTEGER, l2pingResponseEnable INTEGER } l2pingResponseIfindex OBJECT-TYPE SYNTAX INTEGER (1..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of interface that uniquely identifies an l2ping entry in the l2PingResponseTable table. interface should be physical l2 interface" ::= { l2PingResponseEntry 1 } l2pingResponseEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "L2 ping response enable(1), or disable(2). Default : disable(2)." DEFVAL {disable} ::= { l2PingResponseEntry 2 } --syncE OBJECT IDENTIFIER ::= { OID 81 } syncEDeviceClockID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "A exclusive flag to distinguish every device" ::= { syncE 1 } syncEGlbEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether the device is a synchronous equipment. The meanings of the values are: enable(1) - A synchronous equipment; disable(2) - Not a synchronous equipment" DEFVAL { disable } ::= { syncE 2 } syncESsmGlbEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether the device work under synchronous operation mode. The meanings of the values are: enable(1) - Under synchronous operation mode; disable(2) - Under non-sync operation mode" DEFVAL { disable } ::= { syncE 3 } syncEDeviceType OBJECT-TYPE SYNTAX INTEGER {master-only(1), slave-only(2), none(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the device type. The meanings of the values are: master-olny(1) - master-only type; slave-only(2) - slave-only type; none(3) - default type" DEFVAL { none } ::= { syncE 4 } syncELocalQuality OBJECT-TYPE SYNTAX INTEGER {op2-prs(1), op1-prc(2), op2-eec2(3), op1-eec1(4),op1-dnu(5), op2-dus(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the device quality globally under option1. The meanings of the values are: op2-prs(1) - Primary reference source; op1-prc(2) - Primary reference clock; op2-eec2(3) - EEC2 clock(ITU-T G.8264); op1-eec1(4) - EEC1 clock(ITU-T G.8264); op1-dnu(5) - Do not use this quality; op2-dus(6) - Do not use for synchronization" DEFVAL { op1-dnu } ::= { syncE 5 } syncELockedQuality OBJECT-TYPE SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the locked quality.The meanings of the values are: prs(1) - PRS traceable (ITU-T G.811); prc(2) - Primary reference clock; stu(3) - Synchronized Ƀ Traceability unknown; ssua(4) - Type I or V slave clock defined in ITU-T G.812; tnc(5) - Traceable to transit node clock (ITU-T G.812, type V); st2(6) - Traceable to stratum 2 (ITU-T G.812, type II); ssub(7) - Type VI slave clock defined in ITU-T G.812; eec2(8) - EEC2 clock or st3 clock; eec1(9) - EEC1 clock or SEC clock; smc(10) - Traceable to SONET clock self timed; st3e(11) - Traceable to stratum 3E (ITU-T G.812, type III); prov(12) - Provisionable by the network operator; dnu(13) - Do not use this quality; dus(14) - Do not use for synchronization" ::= { syncE 6 } syncELocalPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the device priority globally. The range is 1 ~ 255" DEFVAL { 255 } ::= { syncE 7 } syncESelectedInterface OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Get ifindex of the current selected port. 0 means no interface is selected." ::= { syncE 8 } syncEExtensionEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether the device start extend ssm. The meanings of the values are: enable(1) - Start extend ssm; disable(2) - Not start extend ssm" DEFVAL { disable } ::= { syncE 9 } syncEClockState OBJECT-TYPE SYNTAX INTEGER {master-clock(1), freerun(2), holdover(3), lock(4), unlock(5)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the device clock status. The meanings of the values are: master-clock(1) - Master-only device affords time signal; freerun(2) - Device has not been synchronized; holdover(3) - Device going to holdover; lock(4) - Device select and lock a time signal unlock(5) - Device select and unlock a time signal" ::= { syncE 10 } syncEOptionMode OBJECT-TYPE SYNTAX INTEGER {op1(1), op2(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the device clock ssm option mode. op1(1) - Option mode 1; op2(2) - Option mode 2" ::= { syncE 11 } syncESwitchForceIF OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Switch time resource to one interface forcibaly. The value is the ifindex. Value 0 cancles configuration" DEFVAL { 0 } ::= { syncE 12 } syncEIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SYNCEIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of ssm interface entry." ::= { syncE 13 } syncEIfEntry OBJECT-TYPE SYNTAX SYNCEIFEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ssm interface entry" INDEX { syncEIfIndex } ::= { syncEIfTable 1 } SYNCEIFEntry ::= SEQUENCE { syncEIfIndex Integer32, syncEIfSyncEEnable INTEGER, syncEIfSyncEPduMode INTEGER, syncEIfPortPriority Integer32, syncEIfPortUp INTEGER, syncEIfPortQuality INTEGER, syncEIfSendTimerState INTEGER, syncEIfTimeoutTimerState INTEGER, syncEIfSendQuality INTEGER, syncEIFDNUgroup Integer32, syncEIfReplaceClockId INTEGER, syncEIfForcibleRxQL INTEGER, syncEIfForcibleTxQL INTEGER } syncEIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index which is able to apply ssm." ::= { syncEIfEntry 1 } syncEIfSyncEEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether the port is a synchronous port. The meanings of the values are: enable(1) - a synchronous port; disable(2) - not a synchronous port" DEFVAL { disable } ::= { syncEIfEntry 2 } syncEIfSyncEPduMode OBJECT-TYPE SYNTAX INTEGER {rx(1), tx(2), all(3), none-all(4), none-rx(5), none-tx(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set whether the interface can receive or send PDU. The meanings of the values are: rx(1) - receive PDU only; tx(2) - send PDU only; all(3) - receive and send PDU; none-all(4) - disable receive and send PDU; none-rx(5) - receive PDU only; none-tx(6) - send PDU only" DEFVAL { all } ::= { syncEIfEntry 3 } syncEIfPortPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the port priority. The range is 1 ~ 255." DEFVAL { 255 } ::= { syncEIfEntry 4 } syncEIfPortUp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the status of whether the port is up. The meanings of the values are: enable(1) - Port is up; disable(2) - Port is down" ::= { syncEIfEntry 5 } syncEIfPortQuality OBJECT-TYPE SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the current received quality of port. The meanings of the values are: prs(1) - PRS traceable (ITU-T G.811); prc(2) - Primary reference clock; stu(3) - Synchronized Ƀ Traceability unknown; ssua(4) - Type I or V slave clock defined in ITU-T G.812; tnc(5) - Traceable to transit node clock (ITU-T G.812, type V); st2(6) - Traceable to stratum 2 (ITU-T G.812, type II); ssub(7) - Type VI slave clock defined in ITU-T G.812; eec2(8) - EEC2 clock or st3 clock; eec1(9) - EEC1 clock or SEC clock; smc(10) - Traceable to SONET clock self timed; st3e(11) - Traceable to stratum 3E (ITU-T G.812, type III); prov(12) - Provisionable by the network operator; dnu(13) - Do not use this quality; dus(14) - Do not use for synchronization; na(15) - N/A(not receive)" ::= { syncEIfEntry 6 } syncEIfSendTimerState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the status of Send timer. The meanings of the values are: enable(1) - Enable; disable(2) - Disable" ::= { syncEIfEntry 7 } syncEIfTimeoutTimerState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the status of Timeout timer. The meanings of the values are: enable(1) - Enable; disable(2) - Disable" ::= { syncEIfEntry 8 } syncEIfSendQuality OBJECT-TYPE SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the current sending quality of port. The meanings of the values are: prs(1) - PRS traceable (ITU-T G.811); prc(2) - Primary reference clock; stu(3) - Synchronized Ƀ Traceability unknown; ssua(4) - Type I or V slave clock defined in ITU-T G.812; tnc(5) - Traceable to transit node clock (ITU-T G.812, type V); st2(6) - Traceable to stratum 2 (ITU-T G.812, type II); ssub(7) - Type VI slave clock defined in ITU-T G.812; eec2(8) - EEC2 clock or st3 clock; eec1(9) - EEC1 clock or SEC clock; smc(10) - Traceable to SONET clock self timed; st3e(11) - Traceable to stratum 3E (ITU-T G.812, type III); prov(12) - Provisionable by the network operator; dnu(13) - Do not use this quality; dus(14) - Do not use for synchronization; na(15) - N/A(not send)" ::= { syncEIfEntry 9 } syncEIFDNUgroup OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Add the port into DNU group. The range is 0 ~ 255. value 0 is delete port from DNU group." DEFVAL { 0 } ::= { syncEIfEntry 10 } syncEIfReplaceClockId OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Get or set the status of replace clockid. The meanings of the values are: enable(1) - Enable; disable(2) - Disable" DEFVAL { disable } ::= { syncEIfEntry 11 } syncEIfForcibleRxQL OBJECT-TYPE SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} MAX-ACCESS read-write STATUS current DESCRIPTION "Get and set Rx quality of physical port. The meanings of the values are: prs(1) - PRS traceable (ITU-T G.811); prc(2) - Primary reference clock; stu(3) - Synchronized Ƀ Traceability unknown; ssua(4) - Type I or V slave clock defined in ITU-T G.812; tnc(5) - Traceable to transit node clock (ITU-T G.812, type V); st2(6) - Traceable to stratum 2 (ITU-T G.812, type II); ssub(7) - Type VI slave clock defined in ITU-T G.812; eec2(8) - EEC2 clock or st3 clock; eec1(9) - EEC1 clock or SEC clock; smc(10) - Traceable to SONET clock self timed; st3e(11) - Traceable to stratum 3E (ITU-T G.812, type III); prov(12) - Provisionable by the network operator; dnu(13) - Do not use this quality; dus(14) - Do not use for synchronization; na(15) - N/A(not set Rx QL forcibly)" DEFVAL { 15 } ::= { syncEIfEntry 12 } syncEIfForcibleTxQL OBJECT-TYPE SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} MAX-ACCESS read-write STATUS current DESCRIPTION "Get and set Tx quality of physical port. The meanings of the values are: prs(1) - PRS traceable (ITU-T G.811); prc(2) - Primary reference clock; stu(3) - Synchronized Ƀ Traceability unknown; ssua(4) - Type I or V slave clock defined in ITU-T G.812; tnc(5) - Traceable to transit node clock (ITU-T G.812, type V); st2(6) - Traceable to stratum 2 (ITU-T G.812, type II); ssub(7) - Type VI slave clock defined in ITU-T G.812; eec2(8) - EEC2 clock or st3 clock; eec1(9) - EEC1 clock or SEC clock; smc(10) - Traceable to SONET clock self timed; st3e(11) - Traceable to stratum 3E (ITU-T G.812, type III); prov(12) - Provisionable by the network operator; dnu(13) - Do not use this quality; dus(14) - Do not use for synchronization; na(15) - N/A(not set Tx QL forcibly)" DEFVAL { 15 } ::= { syncEIfEntry 13 } --ssmForcibleE1RxQL OBJECT-TYPE -- SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Get and set Rx quality of E1 port. -- The meanings of the values are: -- prs(1) - PRS traceable (ITU-T G.811); -- prc(2) - Primary reference clock; -- stu(3) - Synchronized Ƀ Traceability unknown; -- ssua(4) - Type I or V slave clock -- defined in ITU-T G.812; -- tnc(5) - Traceable to transit node clock -- (ITU-T G.812, type V); -- st2(6) - Traceable to stratum 2 -- (ITU-T G.812, type II); -- ssub(7) - Type VI slave clock defined in ITU-T G.812; -- eec2(8) - EEC2 clock or st3 clock; -- eec1(9) - EEC1 clock or SEC clock; -- smc(10) - Traceable to SONET clock self timed; -- st3e(11) - Traceable to stratum 3E -- (ITU-T G.812, type III); -- prov(12) - Provisionable by the network operator; -- dnu(13) - Do not use this quality; -- dus(14) - Do not use for synchronization; -- na(15) - N/A(not set Rx QL forcibly)" -- DEFVAL { 15 } -- ::= { syncE 14 } -- --ssmForcibleE1TxQL OBJECT-TYPE -- SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Get and set Tx quality of E1 port. -- The meanings of the values are: -- prs(1) - PRS traceable (ITU-T G.811); -- prc(2) - Primary reference clock; -- stu(3) - Synchronized Ƀ Traceability unknown; -- ssua(4) - Type I or V slave clock -- defined in ITU-T G.812; -- tnc(5) - Traceable to transit node clock -- (ITU-T G.812, type V); -- st2(6) - Traceable to stratum 2 -- (ITU-T G.812, type II); -- ssub(7) - Type VI slave clock defined in ITU-T G.812; -- eec2(8) - EEC2 clock or st3 clock; -- eec1(9) - EEC1 clock or SEC clock; -- smc(10) - Traceable to SONET clock self timed; -- st3e(11) - Traceable to stratum 3E -- (ITU-T G.812, type III); -- prov(12) - Provisionable by the network operator; -- dnu(13) - Not to be used for synchronization; -- dus(14) - Not to be used for synchronization; -- na(15) - N/A(not set Tx QL forcibly)" -- DEFVAL { 15 } -- ::= { syncE 15 } syncEClockRecoverySelect OBJECT-TYPE SYNTAX INTEGER {synce(1), bits1(2), bits2(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the way to recovery clock. The meanings of the values are: synce(1) - Set syncE to recovery clock; bits1(2) - Set bits1 to recovery clock; bits2(3) - Set bits2 to recovery clock" DEFVAL { 1 } ::= { syncE 15 } syncENotifications OBJECT IDENTIFIER ::= { syncE 100 } syncEStateChange NOTIFICATION-TYPE OBJECTS {syncEClockState, syncESelectedInterface} STATUS current DESCRIPTION "This trap will be generated when state of syncE changes." ::= {syncENotifications 1} --arpConfig OBJECT IDENTIFIER ::= { OID 82 } arpGratuitousRecvEn OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Enable or disable receiving gratuitous ARP packets." DEFVAL { disable } ::= { arpConfig 1 } arpAllEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " All arp entries." ::= { arpConfig 2 } arpAllIncompleteEntries OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " All arp incomplete entries." ::= { arpConfig 3 } --cfm OBJECT IDENTIFIER ::= { OID 83 } cfmEn OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable cfm globally." DEFVAL { disable } ::= { cfm 1 } -- cfmLearnRmepEn OBJECT-TYPE -- SYNTAX INTEGER {enable(1),disable(2)} -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Enable or disable learning remote MEP globally." -- DEFVAL { 2 } -- ::= { cfm 2 } -- cfmCcmDatabaseSize OBJECT-TYPE -- SYNTAX Integer32 (1..2048) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The max number of learning remote MEPs." -- DEFVAL { 100 } -- ::= { cfm 3 } cfmLinktraceCacheEn OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable caching linktrace results globally." DEFVAL { disable } ::= { cfm 4 } cfmLinktraceCacheSize OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The max number of caching linktrace results." DEFVAL { 100 } ::= { cfm 5 } cfmLinktraceHoldTime OBJECT-TYPE SYNTAX Integer32 (60..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of reserving linktraace cache entry, unit is minute." DEFVAL { 60 } ::= { cfm 6 } cfmMipFdbDatabaseSize OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The max number of learning MIP fdb entries." DEFVAL { 100 } ::= { cfm 7 } cfmMipFdbHoldTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of reserving MIP fdb entry, unit is minute. When fdb is static, the value of hold time is 65535." DEFVAL { 60 } ::= { cfm 8 } cfmSFReasonLoc OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable that loss of continuity is signal fail reason." DEFVAL { disable } ::= { cfm 11 } cfmSFReasonRxRdi OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable that rdi of remote MEP is signal fail reason." DEFVAL { disable } ::= { cfm 12 } cfmSFReasonAisDefect OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable that ais condition of MEP is signal fail reason." DEFVAL { disable } ::= { cfm 13 } cfmMDErrorClearLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "According to MD level, clearing all errors in MD." DEFVAL { 0 } ::= { cfm 14 } cfmMipFdbClear OBJECT-TYPE SYNTAX INTEGER {enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all entries in MIP fdb database." ::= { cfm 15 } cfmLinkTraceCacheClear OBJECT-TYPE SYNTAX INTEGER {enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all entries in linktrace cache." ::= { cfm 17 } cfmMDTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMMDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm maintenance domain." ::= { cfm 18 } cfmMDEntry OBJECT-TYPE SYNTAX CFMMDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfm maintenance domain." INDEX { cfmMDLevel } ::= { cfmMDTable 1 } CFMMDEntry ::= SEQUENCE { cfmMDLevel Integer32, cfmMDName OCTET STRING, cfmMDRowStatus RowStatus } cfmMDLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMDTable. Maintenance domain level number." ::= { cfmMDEntry 1 } cfmMDName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..43)) MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm maintenance domain name." ::= { cfmMDEntry 2 } cfmMDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmMDEntry 6 } cfmMATable OBJECT-TYPE SYNTAX SEQUENCE OF CFMMAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm maintenance association." ::= { cfm 19 } cfmMAEntry OBJECT-TYPE SYNTAX CFMMAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfm maintenance domain." INDEX { cfmMAIndex, cfmMAVlan } ::= { cfmMATable 1 } CFMMAEntry ::= SEQUENCE { cfmMAIndex Integer32, cfmMAVlan Integer32, cfmMAName OCTET STRING, cfmMARowStatus RowStatus, cfmMACCEn INTEGER, cfmMACCVlanPriority Integer32, cfmMAErrorWriteEn INTEGER, cfmMAAisSuppressAlarm INTEGER } cfmMAIndex OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMATable. The MA belongs to the MD and this is the MD level." ::= { cfmMAEntry 1 } cfmMAVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMATable. The MA associates to the vlan." ::= { cfmMAEntry 2 } cfmMAName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..43)) MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm maintenance association name." ::= { cfmMAEntry 3 } cfmMARowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmMAEntry 7 } cfmMACCEn OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable continuity check." DEFVAL { disable } ::= { cfmMAEntry 8 } cfmMACCVlanPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority for the continuirty check packets." DEFVAL { 7 } ::= { cfmMAEntry 9 } cfmMAErrorWriteEn OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable writing errors to error cache." DEFVAL { disable } ::= { cfmMAEntry 10 } cfmMAAisSuppressAlarm OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable suppressing alarms when enter AIS condition." DEFVAL { disable } ::= { cfmMAEntry 11 } cfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm maintenance domain end point." ::= { cfm 20 } cfmMepEntry OBJECT-TYPE SYNTAX CFMMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfm maintenance domain end point." INDEX { cfmMepLevel, cfmMepVlan, cfmMepId } ::= { cfmMepTable 1 } CFMMepEntry ::= SEQUENCE { cfmMepLevel Integer32, cfmMepVlan Integer32, cfmMepId Integer32, cfmMepDirection INTEGER, cfmMepInterval INTEGER, cfmMepIfIndex INTEGER, cfmMepRowStatus RowStatus, cfmMepRdi INTEGER, cfmMepAisCondition INTEGER } cfmMepLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMepTable. The MEP belongs to the MD and this is the MD level." ::= { cfmMepEntry 1 } cfmMepVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMepTable. The MEP belongs to the MA and the MA associates to the vlan." ::= { cfmMepEntry 2 } cfmMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMepTable. The MEP id is exclusive in same MD and MA." ::= { cfmMepEntry 3 } cfmMepDirection OBJECT-TYPE SYNTAX INTEGER {down(0),up(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Up MEP or down MEP." ::= { cfmMepEntry 4 } cfmMepInterval OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval of MEP continuity check message." ::= { cfmMepEntry 5 } cfmMepIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port ifindex and the MEP is configured on the port" ::= { cfmMepEntry 6 } cfmMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmMepEntry 10 } cfmMepRdi OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Rdi status, only clearing MEP rdi is allowed." ::= { cfmMepEntry 11 } cfmMepAisCondition OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Ais condition. When ais packet is received and cc is disabled or LOC defect on MEP, MEP will enter Ais condition." ::= { cfmMepEntry 12 } cfmRMepTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of remote cfm maintenance domain end point." ::= { cfm 21 } cfmRMepEntry OBJECT-TYPE SYNTAX CFMRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of remote cfm maintenance domain end point." INDEX { cfmRMepLevel, cfmRMepVlan, cfmRMepId } ::= { cfmRMepTable 1 } CFMRMepEntry ::= SEQUENCE { cfmRMepLevel Integer32, cfmRMepVlan Integer32, cfmRMepId Integer32, cfmRMepIfIndex INTEGER, cfmRMepAddr OCTET STRING, cfmRMepFlag INTEGER, cfmRMepRowStatus RowStatus, cfmRMepRdi INTEGER } cfmRMepLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmRMepTable. The remote MEP belongs to the MD and this is the MD level." ::= { cfmRMepEntry 1 } cfmRMepVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmRMepTable. The remote MEP belongs to the MA and the MA associates to the vlan." ::= { cfmRMepEntry 2 } cfmRMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmRMepTable. The MEP id is exclusive in same MD and MA." ::= { cfmRMepEntry 3 } cfmRMepIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port ifindex and the remote MEP is configured on the port." ::= { cfmRMepEntry 4 } cfmRMepAddr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The remote MEP mac adress." ::= { cfmRMepEntry 5 } cfmRMepFlag OBJECT-TYPE SYNTAX INTEGER {configured(1),macConfigured(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The remote MEP flag, when the flag is 1, the remote MEP is configured but the remote MEP mac is not configured. When the flag is 2, the remote MEP mac is configured." ::= { cfmRMepEntry 6 } cfmRMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmRMepEntry 10 } cfmRMepRdi OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Rdi status of remote mep." ::= { cfmRMepEntry 11 } cfmMipTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm maintenance domain intermediate point." ::= { cfm 22 } cfmMipEntry OBJECT-TYPE SYNTAX CFMMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfm maintenance domain intermediate point." INDEX { cfmMipLevel, cfmMipVlan, cfmMipIfIndex } ::= { cfmMipTable 1 } CFMMipEntry ::= SEQUENCE { cfmMipLevel Integer32, cfmMipVlan Integer32, cfmMipIfIndex Integer32, cfmMipRowStatus RowStatus } cfmMipLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMipTable. The MIP belongs to the MD and this is the MD level." ::= { cfmMipEntry 1 } cfmMipVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMipTable. The MIP belongs to the MA and the MA associates to the vlan." ::= { cfmMipEntry 2 } cfmMipIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port ifindex and the MIP is configured on the port." ::= { cfmMipEntry 3 } cfmMipRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmMipEntry 7 } cfmAisServerTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMAisServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of alarm indication signal server." ::= { cfm 23 } cfmAisServerEntry OBJECT-TYPE SYNTAX CFMAisServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of alarm indication signal server." INDEX { cfmAisServerIfIndex } ::= { cfmAisServerTable 1 } CFMAisServerEntry ::= SEQUENCE { cfmAisServerIfIndex Integer32, cfmAisServerLevel Integer32, cfmAisServerInterval Integer32, cfmAisServerRowStatus RowStatus } cfmAisServerIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port ifindex and the ais server is configured on the port." ::= { cfmAisServerEntry 1 } cfmAisServerLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of cfmAisServerTable. The ais server belongs to the MD and this is the MD level." ::= { cfmAisServerEntry 2 } cfmAisServerInterval OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The transmission interval of ais packet, only can be 1 second or 60 seconds." DEFVAL { 1 } ::= { cfmAisServerEntry 3 } cfmAisServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmAisServerEntry 7 } cfmAisTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMAisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm MEP ais enable/disable." ::= { cfm 24 } cfmAisEntry OBJECT-TYPE SYNTAX CFMAisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfm mep ais enable/disable." INDEX { cfmAisLevel, cfmAisVlan, cfmAisMepId } ::= { cfmAisTable 1 } CFMAisEntry ::= SEQUENCE { cfmAisLevel Integer32, cfmAisVlan Integer32, cfmAisMepId Integer32, cfmAisIfIndex Integer32, cfmAisConfigLoc INTEGER, cfmAisConfigMismerge INTEGER, cfmAisConfigUnexpectedMep INTEGER, cfmAisConfigUnexpectedMegLevel INTEGER, cfmAisConfigUnexpectedPeriod INTEGER, cfmAisPacketType INTEGER, cfmAisDestAddr MacAddress, cfmAisDestLevel INTEGER, cfmAisRowStatus RowStatus, cfmAisDetectLoc INTEGER, cfmAisDetectMismerge INTEGER, cfmAisDetectUnexpectedMep INTEGER, cfmAisDetectUnexpectedMegLevel INTEGER, cfmAisDetectUnexpectedPeriod INTEGER } cfmAisLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMepTable. The ais MEP belongs to the MD and this is the MD level." ::= { cfmAisEntry 1 } cfmAisVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmAisTable. The ais MEP belongs to the MA and the MA associates to the vlan." ::= { cfmAisEntry 2 } cfmAisMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmAisTable. The MEP id is exclusive in same MD and MA." ::= { cfmAisEntry 3 } cfmAisIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port ifindex and the ais MEP is configured on the port" ::= { cfmAisEntry 4 } cfmAisConfigLoc OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet will be sent when detecting loss of continuity." DEFVAL { disable } ::= { cfmAisEntry 5 } cfmAisConfigMismerge OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet will be sent when detecting incorrect MD or MA name." DEFVAL { disable } ::= { cfmAisEntry 6 } cfmAisConfigUnexpectedMep OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet will be sent when detecting incorrect MEP id." DEFVAL { disable } ::= { cfmAisEntry 7 } cfmAisConfigUnexpectedMegLevel OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet will be sent when detecting incorrect MD level." DEFVAL { disable } ::= { cfmAisEntry 8 } cfmAisConfigUnexpectedPeriod OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet will be sent when detecting mismatch of CC period." DEFVAL { disable } ::= { cfmAisEntry 9 } cfmAisPacketType OBJECT-TYPE SYNTAX INTEGER {uniscast(1),multicast(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet type. When the type is multicast, cfmAisDestAddr will be invalid." ::= { cfmAisEntry 10 } cfmAisDestAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ais packet destination mac address." ::= { cfmAisEntry 11 } cfmAisDestLevel OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The ais destination level at which the AIS frames have to be sent." ::= { cfmAisEntry 12 } cfmAisRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmAisEntry 16 } cfmAisDetectLoc OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When detecting LOC defect, this flag will be true." ::= { cfmAisEntry 17 } cfmAisDetectMismerge OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When detecting incorrect MD or MA name, this flag will be true." ::= { cfmAisEntry 18 } cfmAisDetectUnexpectedMep OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When detecting incorrect MEP id, this flag will be true." ::= { cfmAisEntry 19 } cfmAisDetectUnexpectedMegLevel OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When detecting incorrect MD level, this flag will be true." ::= { cfmAisEntry 20 } cfmAisDetectUnexpectedPeriod OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When detecting mismatch of CC period, this flag will be true." ::= { cfmAisEntry 21 } cfmLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of loopback remote MEP or MIP." ::= { cfm 25 } cfmLoopbackEntry OBJECT-TYPE SYNTAX CFMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfmLoopbackTable." INDEX { cfmLoopbackIndex } ::= { cfmLoopbackTable 1 } CFMLoopbackEntry ::= SEQUENCE { cfmLoopbackIndex Integer32, cfmLoopbackLevel Integer32, cfmLoopbackVlan Integer32, cfmLoopbackMepId Integer32, cfmLoopbackFrameType INTEGER, cfmLoopbackRMepId Integer32, cfmLoopbackRmac MacAddress, cfmLoopbackRepeat Integer32, cfmLoopbackExp Integer32, cfmLoopbackTimeout Integer32, cfmLoopbackRowStatus RowStatus, cfmLoopbackOperState INTEGER, cfmLoopbackSuccessRate Integer32 } cfmLoopbackIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfm loopback, Must be 1." ::= { cfmLoopbackEntry 1 } cfmLoopbackLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback is initiated by a MEP and the MEP belongs to the MD and this is the MD level." ::= { cfmLoopbackEntry 2 } cfmLoopbackVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback is initiated by a MEP and the MEP belongs to the MA and the MA associates to the vlan." ::= { cfmLoopbackEntry 3 } cfmLoopbackMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback is initiated by a MEP and the MEP id is exclusive in same MD and MA." ::= { cfmLoopbackEntry 4 } cfmLoopbackFrameType OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Frame type of cfm loopback." ::= { cfmLoopbackEntry 5 } cfmLoopbackRMepId OBJECT-TYPE SYNTAX Integer32 (0..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP id. When frame type is unicast, this node is valid. if the remote MEP id is 0, the value is invalid and cfmLoopbackRmac will be used." ::= { cfmLoopbackEntry 6 } cfmLoopbackRmac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP or MEP mac address. if the cfmLoopbackRMepId isn't 0, the node is invalid." ::= { cfmLoopbackEntry 7 } cfmLoopbackRepeat OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Loopback repeat times." ::= { cfmLoopbackEntry 8 } cfmLoopbackExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority of loopback packets." ::= { cfmLoopbackEntry 9 } cfmLoopbackTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure time out of per loopback packet." ::= { cfmLoopbackEntry 10 } cfmLoopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmLoopbackEntry 13 } cfmLoopbackOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { cfmLoopbackEntry 14 } cfmLoopbackSuccessRate OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Success-rate of the operation." ::= { cfmLoopbackEntry 15 } cfmLinktraceTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMLinktraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of linktrace remote MEP or MIP." ::= { cfm 26 } cfmLinktraceEntry OBJECT-TYPE SYNTAX CFMLinktraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfmLinktraceTable." INDEX { cfmLinktraceIndex } ::= { cfmLinktraceTable 1 } CFMLinktraceEntry ::= SEQUENCE { cfmLinktraceIndex Integer32, cfmLinktraceLevel Integer32, cfmLinktraceVlan Integer32, cfmLinktraceMepId Integer32, cfmLinktraceRMepId Integer32, cfmLinktraceRmac MacAddress, cfmLinktraceTtl Integer32, cfmLinktraceExp Integer32, cfmLinktraceTimeout Integer32, cfmLinktraceEgressIdTLV INTEGER, cfmLinktraceSenderIdTLV INTEGER, cfmLinktraceOrganizationSpecTLV INTEGER, cfmLinktraceRowStatus RowStatus, cfmLinktraceOperState INTEGER } cfmLinktraceIndex OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfm linktrace, Must be 1." ::= { cfmLinktraceEntry 1 } cfmLinktraceLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Linktrace is initiated by a MEP, the MEP belongs to the MD and this is the MD level." ::= { cfmLinktraceEntry 2 } cfmLinktraceVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Linktrace is initiated by a MEP, the MEP belongs to the MA and the MA associates to the vlan." ::= { cfmLinktraceEntry 3 } cfmLinktraceMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Linktrace is initiated by a MEP and the MEP id is exclusive in same MD and MA." ::= { cfmLinktraceEntry 4 } cfmLinktraceRMepId OBJECT-TYPE SYNTAX Integer32 (0..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP id. if the Remote MEP id is 0, cfmLinktraceRmac will be used." ::= { cfmLinktraceEntry 5 } cfmLinktraceRmac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEP or MIP mac address. if the cfmLinktraceRMepId isn't 0, this node is invalid." ::= { cfmLinktraceEntry 6 } cfmLinktraceTtl OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of maximum hops." ::= { cfmLinktraceEntry 7 } cfmLinktraceExp OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan priority of linktrace packets." ::= { cfmLinktraceEntry 8 } cfmLinktraceTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure time out of per hop." ::= { cfmLinktraceEntry 9 } cfmLinktraceEgressIdTLV OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The linktrace message will include Egress Identifier TLV." ::= { cfmLinktraceEntry 10 } cfmLinktraceSenderIdTLV OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The linktrace message will include Sender Identifier TLV." ::= { cfmLinktraceEntry 11 } cfmLinktraceOrganizationSpecTLV OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The linktrace message will include Organization Specific TLV." ::= { cfmLinktraceEntry 12 } cfmLinktraceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { cfmLinktraceEntry 16 } cfmLinktraceOperState OBJECT-TYPE SYNTAX INTEGER { done(1), in-progress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation status." ::= { cfmLinktraceEntry 17 } cfmMipFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMMipFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the cfm MIP mac address entry." ::= { cfm 29 } cfmMipFdbEntry OBJECT-TYPE SYNTAX CFMMipFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores the cfm MIP mac address entry." INDEX { cfmMipFdbVlan, cfmMipFdbMacAddress, cfmMipFdbLevel } ::= { cfmMipFdbTable 1 } CFMMipFdbEntry ::= SEQUENCE { cfmMipFdbVlan Integer32, cfmMipFdbMacAddress MacAddress, cfmMipFdbLevel Integer32, cfmMipFdbIfIndex Integer32, cfmMipFdbAgeTime Integer32 } cfmMipFdbVlan OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMipFdbTable, identifying value for vlan." ::= { cfmMipFdbEntry 1 } cfmMipFdbMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMipFdbTable, the mac address of MIP forwarding database entry." ::= { cfmMipFdbEntry 2 } cfmMipFdbLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmMipFdbTable, the MIP belongs to the MD and this is the MD level." ::= { cfmMipFdbEntry 3 } cfmMipFdbIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port ifindex, MIP fdb is learnt from the port or configured on the port." ::= { cfmMipFdbEntry 4 } cfmMipFdbAgeTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The interval of reserving MIP fdb entry, unit is minute." ::= { cfmMipFdbEntry 5 } cfmErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm reporting errors." ::= { cfm 30 } cfmErrorEntry OBJECT-TYPE SYNTAX CFMErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfmErrorTable." INDEX { cfmErrorLevel, cfmErrorVlan, cfmErrorMepId, cfmErrorIndex } ::= { cfmErrorTable 1 } CFMErrorEntry ::= SEQUENCE { cfmErrorLevel Integer32, cfmErrorVlan Integer32, cfmErrorMepId Integer32, cfmErrorIndex Integer32, cfmErrorRmac MacAddress, cfmErrorReason INTEGER, cfmErrorReportTime OCTET STRING } cfmErrorLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Errors are reported by a MEP, the MEP belongs to the MD and this is the MD level." ::= { cfmErrorEntry 1 } cfmErrorVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Errors are reported by a MEP, the MEP belongs to the MA and the MA associates to the vlan." ::= { cfmErrorEntry 2 } cfmErrorMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Errors are reported by a MEP and the MEP id is exclusive in same MD and MA." ::= { cfmErrorEntry 3 } cfmErrorIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmErrorTable, the range is 1 to 5." ::= { cfmErrorEntry 4 } cfmErrorRmac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of remote MEP." ::= { cfmErrorEntry 5 } cfmErrorReason OBJECT-TYPE SYNTAX INTEGER { rdi(2), rdi-clear(3), loc(4), loc-clear(5), unexpected-mep(6), unexpected-mep-clear(7), unexpected-period(8), unexpected-period-clear(9), mismerge(10), mismerge-clear(11), unexpected-meg-level(12), unexpected-meg-level-clear(13), recieve-ais(14), no-receive-ais-in-35-period(15), lck-receive-cause-ais(16), lck-receive-cause-ais-clear(17), enter-lck-condition(18), exit-lck-condiftion(19), enter-csf-condition(20), exit-csf-condition(21), rmep-first-packet-receive(22) } MAX-ACCESS read-only STATUS current DESCRIPTION "The error reson is as follows: rdi(2), rdi-clear(3), loc(4), loc-clear(5), unexpected-mep(6), unexpected-mep-clear(7), unexpected-period(8), unexpected-period-clear(9), mismerge(10), mismerge-clear(11), unexpected-meg-level(12), unexpected-meg-level-clear(13), recieve-ais(14), no-receive-ais-in-35-period(15), lck-receive-cause-ais(16), lck-receive-cause-ais-clear(17), enter-lck-condition(18), exit-lck-condiftion(19), enter-csf-condition(20), exit-csf-condition(21), rmep-first-packet-receive(22)" ::= { cfmErrorEntry 6 } cfmErrorReportTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The reporting time of the error." ::= { cfmErrorEntry 7 } cfmLTCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMLTCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm linktrace cache." ::= { cfm 31 } cfmLTCacheEntry OBJECT-TYPE SYNTAX CFMLTCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfmLTCacheTable." INDEX { cfmLTCacheIndex } ::= { cfmLTCacheTable 1 } CFMLTCacheEntry ::= SEQUENCE { cfmLTCacheIndex Integer32, cfmLTCacheLevel Integer32, cfmLTCacheVlan Integer32, cfmLTCacheTargetMacAddress MacAddress, cfmLTCacheStartTime OCTET STRING, cfmLTCacheAge Integer32, cfmLTCacheHops Integer32, cfmLTCacheTTL Integer32, cfmLTCacheForwarded INTEGER, cfmLTCacheTerminalMEP INTEGER, cfmLTCacheRelayAction INTEGER, cfmLTCacheIngressAction INTEGER, cfmLTCacheIngressMacAddress MacAddress, cfmLTCacheIngressIfName OCTET STRING, cfmLTCacheEgressAction INTEGER, cfmLTCacheEgressMacAddress MacAddress, cfmLTCacheEgressIfName OCTET STRING, cfmLTCacheLastEgressID MacAddress, cfmLTCacheNextEgressID MacAddress } cfmLTCacheIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Linktrace cache index." ::= { cfmLTCacheEntry 1 } cfmLTCacheLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Linktrace is initiated by a MEP, the MEP belongs to the MD and this is the MD level." ::= { cfmLTCacheEntry 2 } cfmLTCacheVlan OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Linktrace is initiated by a MEP, the MEP belongs to the MA and the MA associates to the vlan." ::= { cfmLTCacheEntry 3 } cfmLTCacheTargetMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Linktrace target mac address." ::= { cfmLTCacheEntry 4 } cfmLTCacheStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time of sending first linktrace message." ::= { cfmLTCacheEntry 5 } cfmLTCacheAge OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Linktrace age time, unit is minute." ::= { cfmLTCacheEntry 6 } cfmLTCacheHops OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of cfmLTCacheTable, the linktrace hop number and the range is 1 to 64." ::= { cfmLTCacheEntry 7 } cfmLTCacheTTL OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "When LTM is received and forwarded by switch, the TTL will minus one. when the TTL equals one, the LTM will not be relayed." ::= { cfmLTCacheEntry 8 } cfmLTCacheForwarded OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If LTM will be forwarded, this flag is true." ::= { cfmLTCacheEntry 9 } cfmLTCacheTerminalMEP OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When the LTM is received by terminal MEP and LTR is sent by the MEP, this flag is true." ::= { cfmLTCacheEntry 10 } cfmLTCacheRelayAction OBJECT-TYPE SYNTAX INTEGER { relayNone(0), relayHit(1), relayFdb(2), relayMipFdb(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "When LTM is received by terminal MEP or MIP, this flag is relayHit. When LTM is forwarded by Fdb, this flag is relayFdb. When LTM is forwarded by MIP Fdb, this flag is relayMipFdb." ::= { cfmLTCacheEntry 11 } cfmLTCacheIngressAction OBJECT-TYPE SYNTAX INTEGER { ingNone(0), ingOK(1),ingDown(2), ingBlocked(3) ,ingNotMemVlan(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "When the ingress port status is normal, this flag is ingOK. When the ingress port is blocked by STP, this flag is ingBlocked." ::= { cfmLTCacheEntry 12 } cfmLTCacheIngressMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of ingress port." ::= { cfmLTCacheEntry 13 } cfmLTCacheIngressIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress interface name." ::= { cfmLTCacheEntry 14 } cfmLTCacheEgressAction OBJECT-TYPE SYNTAX INTEGER { egrNone(0), egrOK(1), egrDown(2), egrBlocked(3), egrNotMemVlan(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "When the egress port status is normal, this flag is egrOK. When the egress port is blocked by STP, this flag is egrBlocked." ::= { cfmLTCacheEntry 15 } cfmLTCacheEgressMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of egress port." ::= { cfmLTCacheEntry 16 } cfmLTCacheEgressIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Egress interface name." ::= { cfmLTCacheEntry 17 } cfmLTCacheLastEgressID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The route mac address of the source switch which initiates the linktrace." ::= { cfmLTCacheEntry 18 } cfmLTCacheNextEgressID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The route mac address of the switch which transmits this LTR." ::= { cfmLTCacheEntry 19 } cfmLTResultTable OBJECT-TYPE SYNTAX SEQUENCE OF CFMLTResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of cfm linktrace result." ::= { cfm 32 } cfmLTResultEntry OBJECT-TYPE SYNTAX CFMLTResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cfmLTResultTable." INDEX { cfmLTResultHops } ::= { cfmLTResultTable 1 } CFMLTResultEntry ::= SEQUENCE { cfmLTResultHops Integer32, cfmLTResultTTL Integer32, cfmLTResultForwarded INTEGER, cfmLTResultTerminalMEP INTEGER, cfmLTResultRelayAction INTEGER, cfmLTResultIngressAction INTEGER, cfmLTResultIngressMacAddress MacAddress, cfmLTResultIngressIfName OCTET STRING, cfmLTResultEgressAction INTEGER, cfmLTResultEgressMacAddress MacAddress, cfmLTResultEgressIfName OCTET STRING, cfmLTResultLastEgressID MacAddress, cfmLTResultNextEgressID MacAddress } cfmLTResultHops OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of cfmLTResultTable, the linktrace hop number and the range is 1 to 64." ::= { cfmLTResultEntry 1 } cfmLTResultTTL OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "When LTM is received and forwarded by switch, the TTL will minus one. when the TTL equals one, the LTM will not be relayed." ::= { cfmLTResultEntry 2 } cfmLTResultForwarded OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If LTM will be forwarded, this flag is true." ::= { cfmLTResultEntry 3 } cfmLTResultTerminalMEP OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "When the LTM is received by terminal MEP and LTR is sent by the MEP, this flag is true." ::= { cfmLTResultEntry 4 } cfmLTResultRelayAction OBJECT-TYPE SYNTAX INTEGER { relayHit(1), relayFdb(2), relayMipFdb(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "When LTM is received by terminal MEP or MIP, this flag is relayHit. When LTM is forwarded by Fdb, this flag is relayFdb. When LTM is forwarded by MIP Fdb, this flag is relayMipFdb." ::= { cfmLTResultEntry 5 } cfmLTResultIngressAction OBJECT-TYPE SYNTAX INTEGER { ingOK(1), ingBlocked(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When the ingress port status is normal, this flag is ingOK. When the ingress port is blocked by STP, this flag is ingBlocked." ::= { cfmLTResultEntry 6 } cfmLTResultIngressMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of ingress port." ::= { cfmLTResultEntry 7 } cfmLTResultIngressIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress interface name." ::= { cfmLTResultEntry 8 } cfmLTResultEgressAction OBJECT-TYPE SYNTAX INTEGER { egrOK(1), egrDown(2), egrBlocked(3), egrNotMemVlan(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "When the egress port status is normal, this flag is egrOK. When the egress port is blocked by STP, this flag is egrBlocked." ::= { cfmLTResultEntry 9 } cfmLTResultEgressMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mac address of egress port." ::= { cfmLTResultEntry 10 } cfmLTResultEgressIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Egress interface name." ::= { cfmLTResultEntry 11 } cfmLTResultLastEgressID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The route mac address of the source switch which initiates the linktrace." ::= { cfmLTResultEntry 12 } cfmLTResultNextEgressID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The route mac address of the switch which transmits this LTR." ::= { cfmLTResultEntry 13 } cfmTrap OBJECT IDENTIFIER ::= { cfm 1000 } cfmErrorTrap NOTIFICATION-TYPE OBJECTS { cfmErrorRmac, cfmErrorReason } STATUS current DESCRIPTION "Cfm error Trap" ::= { cfmTrap 1 } --efmOAM OBJECT IDENTIFIER ::= { OID 84 } efmOAMIfTable OBJECT-TYPE SYNTAX SEQUENCE OF EFMOAMIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure efm OAM on an interface." ::= { efm 1 } efmOAMIfEntry OBJECT-TYPE SYNTAX EFMOAMIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of efmOAMIfTable." INDEX { efmOAMIfIndex } ::= { efmOAMIfTable 1 } EFMOAMIfEntry ::= SEQUENCE { efmOAMIfIndex Integer32, efmOAMEnable INTEGER, efmOAMMode INTEGER, efmOAMMinRate Integer32, efmOAMMaxRate Integer32, efmOAMLinkMonitorEn INTEGER, efmOAMLinkMonitorSupported INTEGER, efmOAMLinkMonitorFrameHigh Integer32, efmOAMLinkMonitorFrameLow Integer32, efmOAMLinkMonitorFrameWin Integer32, efmOAMLinkMonitorFrameSecHigh Integer32, efmOAMLinkMonitorFrameSecLow Integer32, efmOAMLinkMonitorFrameSecWin Integer32, efmOAMLinkMonitorHighThreAction INTEGER, efmOAMRemoteLoopbackSupported INTEGER, efmOAMRemoteLoopbackTimeout Integer32, efmOAMRemoteLoopbackState INTEGER, efmOAMTimeout Integer32, efmOAMRemoteFailureCriticalEvent INTEGER, efmOAMRemoteFailureDyingGasp INTEGER, efmOAMRemoteFailureLinkFailure INTEGER } efmOAMIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { efmOAMIfEntry 1 } efmOAMEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Ethernet OAM module on a port.The meanings of the values are: enable(1);disable(2)." DEFVAL { disable } ::= { efmOAMIfEntry 2 } efmOAMMode OBJECT-TYPE SYNTAX INTEGER {active(1), passive(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the DTE to active mode or passive mode.The meanings of the values are: active(1);passive(2)." DEFVAL { passive } ::= { efmOAMIfEntry 3 } efmOAMMinRate OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "set the OAMPDU minimum number of PDUS per second. this timer in the range <1-10>." DEFVAL { 1 } ::= { efmOAMIfEntry 4 } efmOAMMaxRate OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "set the OAMPDU maximum number of PDUS per second. this timer in the range <1-10>." DEFVAL { 10 } ::= { efmOAMIfEntry 5 } efmOAMLinkMonitorEn OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Turn on or off link monitoring on an interface.The meanings of the values are: enable(1);disable(2)." DEFVAL { enable } ::= { efmOAMIfEntry 6 } efmOAMLinkMonitorSupported OBJECT-TYPE SYNTAX INTEGER {supported(1), un-supported(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set link monitoring on an interface.The meanings of the values are: supported(1);un-supported(2)." DEFVAL { supported } ::= { efmOAMIfEntry 7 } efmOAMLinkMonitorFrameHigh OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Set value of the high threshold for errored frames. The meanings of the values are: none(0) - no high threshold is configured; Value of the high threshold <1-65535>." DEFVAL { 0 } ::= { efmOAMIfEntry 8 } efmOAMLinkMonitorFrameLow OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Set value of the low threshold for errored frames in the range <0-65535>." DEFVAL { 1 } ::= { efmOAMIfEntry 9 } efmOAMLinkMonitorFrameWin OBJECT-TYPE SYNTAX Integer32(10..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Set size of frame event window in the range <10-600>." DEFVAL { 10 } ::= { efmOAMIfEntry 10 } efmOAMLinkMonitorFrameSecHigh OBJECT-TYPE SYNTAX Integer32(0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "Set value of the High threshold for the number of errored frame-seconds. The meanings of the values are: none(0) - no high threshold is configured; Value of the high threshold <1-900>." DEFVAL { 0 } ::= { efmOAMIfEntry 11 } efmOAMLinkMonitorFrameSecLow OBJECT-TYPE SYNTAX Integer32(1..900) MAX-ACCESS read-write STATUS current DESCRIPTION "Set value of the Low threshold for the number of errored frame-seconds in the range <1-900>." DEFVAL { 1 } ::= { efmOAMIfEntry 12 } efmOAMLinkMonitorFrameSecWin OBJECT-TYPE SYNTAX Integer32(100..9000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Window for frame-seconds events in the range <100-9000>." DEFVAL { 1000 } ::= { efmOAMIfEntry 13 } efmOAMLinkMonitorHighThreAction OBJECT-TYPE SYNTAX INTEGER {error-disable-interface(1), none(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set action when high threshold is detected.The meanings of the values are: error-disable-interface(1) - Disable the interface when high threshold is exceeded; none(2)." DEFVAL { none } ::= { efmOAMIfEntry 14 } efmOAMRemoteLoopbackSupported OBJECT-TYPE SYNTAX INTEGER {supported(1), un-supported(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set remote loopback on a interface. The meanings of the values are: un-supported(2); supported(1)." DEFVAL { un-supported } ::= { efmOAMIfEntry 15 } efmOAMRemoteLoopbackTimeout OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Set remote loopback on a interface.." DEFVAL { 0 } ::= { efmOAMIfEntry 16 } efmOAMRemoteLoopbackState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set remote loopback state on a interface.." DEFVAL { disable } ::= { efmOAMIfEntry 17 } efmOAMTimeout OBJECT-TYPE SYNTAX Integer32(2..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the LOCAL_LOST_LINK_TIMER and start an Ethernet OAM discovery process." DEFVAL { 5 } ::= { efmOAMIfEntry 18 } efmOAMRemoteFailureCriticalEvent OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Failure Action Critical Link Event on an interface. The meanings of the values are:enable(1);disable(2)." DEFVAL { disable } ::= { efmOAMIfEntry 19 } efmOAMRemoteFailureDyingGasp OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "TRemote Failure Action Dying Gasp Event on an interface. The meanings of the values are:enable(1);disable(2)." DEFVAL { disable } ::= { efmOAMIfEntry 20 } efmOAMRemoteFailureLinkFailure OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Remote Failure Action Link Fault Event on an interface. The meanings of the values are:enable(1);disable(2)." DEFVAL { disable } ::= { efmOAMIfEntry 21 } --efmOAMTestLoopbackTable OBJECT-TYPE -- SYNTAX SEQUENCE OF EFMOAMTestLoopbackEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Test efm OAM loopback on an interface." -- ::= { efm 2 } -- --efmOAMTestLoopbackEntry OBJECT-TYPE -- SYNTAX EFMOAMTestLoopbackEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Entry of efmOAMTestLoopbackTable." -- INDEX { efmOAMTestLoopbackIndex } -- ::= { efmOAMTestLoopbackTable 1 } -- --EFMOAMTestLoopbackEntry ::= -- SEQUENCE { -- efmOAMTestLoopbackIndex Integer32, -- efmOAMTestLoopbackIfindex Integer32, -- efmOAMTestLoopbackVlanId Integer32, -- efmOAMTestLoopbackMac MacAddress, -- efmOAMTestLoopbackCount Integer32, -- efmOAMTestLoopbackRowstatus RowStatus -- } -- --efmOAMTestLoopbackIndex OBJECT-TYPE -- SYNTAX Integer32 (1) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "Loopback operaion index." -- ::= { efmOAMTestLoopbackEntry 1 } -- --efmOAMTestLoopbackIfindex OBJECT-TYPE -- SYNTAX Integer32 (1..65535) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION "Interface index to send test packet." -- ::= { efmOAMTestLoopbackEntry 2 } -- --efmOAMTestLoopbackVlanId OBJECT-TYPE -- SYNTAX Integer32 (0..4094) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION "Interface index to send test packet." -- DEFVAL { 0 } -- ::= { efmOAMTestLoopbackEntry 3 } -- --efmOAMTestLoopbackMac OBJECT-TYPE -- SYNTAX MacAddress -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION "Mac address to send test packet." -- ::= { efmOAMTestLoopbackEntry 4 } -- --efmOAMTestLoopbackCount OBJECT-TYPE -- SYNTAX Integer32 (1..10000) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION "Interface index to send test packet." -- ::= { efmOAMTestLoopbackEntry 5 } -- --efmOAMTestLoopbackRowstatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The status of this conceptual row. Now only realize CreateAndGo and -- Destroy and Active. -- 1 means Active -- 4 means CreateAndGo -- 6 means Destroy." -- ::= { efmOAMTestLoopbackEntry 10 } efmOAMDiscoveryTable OBJECT-TYPE SYNTAX SEQUENCE OF EFMOAMDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Get efm OAM discovery state on an interface." ::= { efm 3 } efmOAMDiscoveryEntry OBJECT-TYPE SYNTAX EFMOAMDiscoveryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of efmOAMDiscoveryTable." INDEX { efmOAMDiscoveryIfIndex } ::= { efmOAMDiscoveryTable 1 } EFMOAMDiscoveryEntry ::= SEQUENCE { efmOAMDiscoveryIfIndex Integer32, efmOAMDiscoveryLocalMode INTEGER, efmOAMDiscoveryLocalUnidirection INTEGER, efmOAMDiscoveryLocalLinkMonitor INTEGER, efmOAMDiscoveryLocalRemoteLoopback INTEGER, efmOAMDiscoveryLocalMibRetrieve INTEGER, efmOAMDiscoveryLocalMtuSize Integer32, efmOAMDiscoveryLocalPortStatus INTEGER, efmOAMDiscoveryLocalLoopbackStatus INTEGER, efmOAMDiscoveryLocalPduRevision Integer32, efmOAMDiscoveryRemoteMacAddress MacAddress, efmOAMDiscoveryRemotePduRevision Integer32, efmOAMDiscoveryRemoteVendor OCTET STRING, efmOAMDiscoveryRemoteMode INTEGER, efmOAMDiscoveryRemoteUnidirection INTEGER, efmOAMDiscoveryRemoteLinkMonitor INTEGER, efmOAMDiscoveryRemoteRemoteLoopback INTEGER, efmOAMDiscoveryRemoteMibRetrieve INTEGER, efmOAMDiscoveryRemoteMtuSize Integer32 } efmOAMDiscoveryIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { efmOAMDiscoveryEntry 1 } efmOAMDiscoveryLocalMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local mode." ::= { efmOAMDiscoveryEntry 2 } efmOAMDiscoveryLocalUnidirection OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local unidirection." ::= { efmOAMDiscoveryEntry 3 } efmOAMDiscoveryLocalLinkMonitor OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local link monitor." ::= { efmOAMDiscoveryEntry 4 } efmOAMDiscoveryLocalRemoteLoopback OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local remote loopback." ::= { efmOAMDiscoveryEntry 5 } efmOAMDiscoveryLocalMibRetrieve OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local mib retrieve." ::= { efmOAMDiscoveryEntry 6} efmOAMDiscoveryLocalMtuSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local mtu size." ::= { efmOAMDiscoveryEntry 7 } efmOAMDiscoveryLocalPortStatus OBJECT-TYPE SYNTAX INTEGER { invalid(0), fault(1), active-send-local(2), passive-wait(3), send-local-remote(4),send-local-remote-ok(5), send-any(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local port status." ::= { efmOAMDiscoveryEntry 8 } efmOAMDiscoveryLocalLoopbackStatus OBJECT-TYPE SYNTAX INTEGER { local-loopback(1), remote-loopback(2), no-loopback(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local loopback status." ::= { efmOAMDiscoveryEntry 9 } efmOAMDiscoveryLocalPduRevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local pdu revision." ::= { efmOAMDiscoveryEntry 10 } efmOAMDiscoveryRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote mac addess." ::= { efmOAMDiscoveryEntry 11 } efmOAMDiscoveryRemotePduRevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote pdu revision." ::= { efmOAMDiscoveryEntry 12 } efmOAMDiscoveryRemoteVendor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote vendor." ::= { efmOAMDiscoveryEntry 13 } efmOAMDiscoveryRemoteMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Mode." ::= { efmOAMDiscoveryEntry 14 } efmOAMDiscoveryRemoteUnidirection OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote unidirection." ::= { efmOAMDiscoveryEntry 15 } efmOAMDiscoveryRemoteLinkMonitor OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote link monitor." ::= { efmOAMDiscoveryEntry 16 } efmOAMDiscoveryRemoteRemoteLoopback OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote loopback." ::= { efmOAMDiscoveryEntry 17 } efmOAMDiscoveryRemoteMibRetrieve OBJECT-TYPE SYNTAX INTEGER { supported(1), un-supported(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote mib retrieve." ::= { efmOAMDiscoveryEntry 18 } efmOAMDiscoveryRemoteMtuSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote mtu size." ::= { efmOAMDiscoveryEntry 19 } efmOAMStateTable OBJECT-TYPE SYNTAX SEQUENCE OF EFMOAMStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Get efm OAM state on an interface." ::= { efm 4 } efmOAMStateEntry OBJECT-TYPE SYNTAX EFMOAMStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of efmOAMStateTable." INDEX { efmOAMStateIfIndex } ::= { efmOAMStateTable 1 } EFMOAMStateEntry ::= SEQUENCE { efmOAMStateIfIndex Integer32, efmOAMStateLocalLinkStatus INTEGER, efmOAMStateLocalPduStatus INTEGER, efmOAMStateLocalSatisfied INTEGER, efmOAMStateLocalStable INTEGER, efmOAMStateRemoteStateValid INTEGER, efmOAMStateRemoteStable INTEGER, efmOAMStateLocalPaserState INTEGER, efmOAMStateLocalMultiplexerState INTEGER, efmOAMStateRemotePaserState INTEGER, efmOAMStateRemoteMultiplexerState INTEGER } efmOAMStateIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { efmOAMStateEntry 1 } efmOAMStateLocalLinkStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), fault(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local link status. OK(1),FAULT(2)." ::= { efmOAMStateEntry 2 } efmOAMStateLocalPduStatus OBJECT-TYPE SYNTAX INTEGER { lfInfo(1), rxInfo(2), info(3), any(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local pdu status. LF_INFO(1),RX_INFO(2),INFO(3),ANY(4)." ::= { efmOAMStateEntry 3 } efmOAMStateLocalSatisfied OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local Satisfied. True(1),False(2)." ::= { efmOAMStateEntry 4 } efmOAMStateLocalStable OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local Stable. True(1),False(2)." ::= { efmOAMStateEntry 5 } efmOAMStateRemoteStateValid OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote State valid. True(1),False(2)." ::= { efmOAMStateEntry 6 } efmOAMStateRemoteStable OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Stable. True(1),False(2)." ::= { efmOAMStateEntry 7 } efmOAMStateLocalPaserState OBJECT-TYPE SYNTAX INTEGER { forward(1), loopback(2), discard(3), invalid(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local Parser State. Forward(1),Loopback(2),Discard(3),Invalid(4)." ::= { efmOAMStateEntry 8 } efmOAMStateLocalMultiplexerState OBJECT-TYPE SYNTAX INTEGER { forward(1), discard(2), invalid(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Local Multiplexer State. Forward(1),Discard(2),Invalid(3)." ::= { efmOAMStateEntry 9 } efmOAMStateRemotePaserState OBJECT-TYPE SYNTAX INTEGER { forward(1), loopback(2), discard(3), invalid(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Parser State. Forward(1),Loopback(2),Discard(3),Invalid(4)." ::= { efmOAMStateEntry 10 } efmOAMStateRemoteMultiplexerState OBJECT-TYPE SYNTAX INTEGER { forward(1), discard(2), invalid(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Multiplexer State. Forward(1),Discard(2),Invalid(3)." ::= { efmOAMStateEntry 11 } efmOAMStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF EFMOAMStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Get efm OAM statistic on an interface." ::= { efm 5 } efmOAMStatisticEntry OBJECT-TYPE SYNTAX EFMOAMStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of efmOAMStatisticTable." INDEX { efmOAMStatisticIfIndex } ::= { efmOAMStatisticTable 1 } EFMOAMStatisticEntry ::= SEQUENCE { efmOAMStatisticIfIndex Integer32, efmOAMPduInfomationTx Integer32, efmOAMPduInfomationRx Integer32, efmOAMPduEvtNotificationTx Integer32, efmOAMPduEvtNotificationRx Integer32, efmOAMPduLoopbackControlTx Integer32, efmOAMPduLoopbackControlRx Integer32, efmOAMPduUnsupportedRx Integer32, efmOAMLocalLinkFaultRecords Integer32, efmOAMLocalDyingGaspRecords Integer32, efmOAMLocalCriticalEvtRecords Integer32, efmOAMRemoteLinkFaultRecords Integer32, efmOAMRemoteDyingGaspRecords Integer32, efmOAMRemoteCriticalEvtRecords Integer32, efmOAMLocalErrorFrameRecords Integer32, efmOAMLocalErrorFrameSecondRecords Integer32, efmOAMRemoteErrorSymbolPeriodRecords Integer32, efmOAMRemoteErrorFrameRecords Integer32, efmOAMRemoteErrorFramePeriodRecords Integer32, efmOAMRemoteErrorFrameSecondRecords Integer32, efmOAMLoopbackTestPktsSent Integer32, efmOAMLoopbackTestPktsRecv Integer32, efmOAMLoopbackTestPercentValidRate Integer32 } efmOAMStatisticIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { efmOAMStatisticEntry 1 } efmOAMPduInfomationTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Information OAMPDU Tx." ::= { efmOAMStatisticEntry 2 } efmOAMPduInfomationRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Information OAMPDU Rx." ::= { efmOAMStatisticEntry 3 } efmOAMPduEvtNotificationTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Event Notification OAMPDU Tx." ::= { efmOAMStatisticEntry 4 } efmOAMPduEvtNotificationRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Event Notification OAMPDU Rx." ::= { efmOAMStatisticEntry 5 } efmOAMPduLoopbackControlTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Loopback Control OAMPDU Tx." ::= { efmOAMStatisticEntry 6 } efmOAMPduLoopbackControlRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Loopback Control OAMPDU Rx." ::= { efmOAMStatisticEntry 7 } efmOAMPduUnsupportedRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unsupported OAMPDU Rx." ::= { efmOAMStatisticEntry 8 } efmOAMLocalLinkFaultRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local ink Fault records." ::= { efmOAMStatisticEntry 9 } efmOAMLocalDyingGaspRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local dying Gasp records." ::= { efmOAMStatisticEntry 10 } efmOAMLocalCriticalEvtRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local critical Event records." ::= { efmOAMStatisticEntry 11 } efmOAMRemoteLinkFaultRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote link Fault records." ::= { efmOAMStatisticEntry 12 } efmOAMRemoteDyingGaspRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote dying Gasp records." ::= { efmOAMStatisticEntry 13 } efmOAMRemoteCriticalEvtRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote critical Event records." ::= { efmOAMStatisticEntry 14 } efmOAMLocalErrorFrameRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local errored Frame records." ::= { efmOAMStatisticEntry 15 } efmOAMLocalErrorFrameSecondRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local errored frame Seconds records." ::= { efmOAMStatisticEntry 16 } efmOAMRemoteErrorSymbolPeriodRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote errored Symbol Period records." ::= { efmOAMStatisticEntry 17 } efmOAMRemoteErrorFrameRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote errored Frame records." ::= { efmOAMStatisticEntry 18 } efmOAMRemoteErrorFramePeriodRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote errored Frame Period records." ::= { efmOAMStatisticEntry 19 } efmOAMRemoteErrorFrameSecondRecords OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote errored Frame Seconds records." ::= { efmOAMStatisticEntry 20 } efmOAMLoopbackTestPktsSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Test packet is sended." ::= { efmOAMStatisticEntry 21 } efmOAMLoopbackTestPktsRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Test packet is received." ::= { efmOAMStatisticEntry 22 } efmOAMLoopbackTestPercentValidRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent valid rate." ::= { efmOAMStatisticEntry 23 } -- ptp OBJECT IDENTIFIER ::= { OID 85 } ptpGlobalInfo OBJECT IDENTIFIER ::= { ptp 1 } --ptpDomainIndex OBJECT-TYPE -- SYNTAX Integer32 (0..255) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Ptp domain index." -- ::= { ptpGlobalInfo 1 } ptpPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp port number." ::= { ptpGlobalInfo 1 } ptpUtcOffset OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp utc offset." ::= { ptpGlobalInfo 2 } ptpLocalClockIdentity OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp local clock identiry." ::= { ptpGlobalInfo 3 } ptpBMCRecMem OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc reciver member" ::= { ptpGlobalInfo 4 } ptpBMCParentClockId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc parent clock id." ::= { ptpGlobalInfo 5 } ptpBMCParentPortNum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc parent port number." ::= { ptpGlobalInfo 6 } ptpBMCMeanPathDelay OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc mean path delay." ::= { ptpGlobalInfo 7 } ptpBMCOffsetFromMaster OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc offset from master." ::= { ptpGlobalInfo 8 } ptpBMCStepRemoved OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc step removed." ::= { ptpGlobalInfo 9 } ptpBMCGMClockId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm clock id." ::= { ptpGlobalInfo 10 } ptpBMCGMPriority1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm priority1." ::= { ptpGlobalInfo 11 } ptpBMCGMPriority2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm priority2." ::= { ptpGlobalInfo 12 } ptpBMCGMClockAccuracy OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm clock accuracy." ::= { ptpGlobalInfo 13 } ptpBMCGMClockClass OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm clock class." ::= { ptpGlobalInfo 14 } ptpBMCGMTimeSource OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm time source." ::= { ptpGlobalInfo 15 } ptpBMCGMUtcOffset OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm utc offset." ::= { ptpGlobalInfo 16 } ptpBMCGMUTCOffsetValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm utc offset valid." ::= { ptpGlobalInfo 17 } ptpBMCGMTimeScale OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm time scale." ::= { ptpGlobalInfo 18 } ptpBMCGMTimeTraceable OBJECT-TYPE SYNTAX INTEGER{true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm time trace able." DEFVAL { false } ::= { ptpGlobalInfo 19 } ptpBMCGMLeap59 OBJECT-TYPE SYNTAX INTEGER{true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm leap59." DEFVAL { false } ::= { ptpGlobalInfo 20 } ptpBMCGMLeap61 OBJECT-TYPE SYNTAX INTEGER{true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm leap61." DEFVAL { false } ::= { ptpGlobalInfo 21 } ptpBMCGMFrequencyTraceable OBJECT-TYPE SYNTAX INTEGER{true(1),false(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp bmc gm frequency traceable." DEFVAL { false } ::= { ptpGlobalInfo 22 } ptpClearStatistics OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all statistics for the ptp. 0 mean clear all ptp interface statistics." ::= { ptpGlobalInfo 23 } ptpDeviceType OBJECT-TYPE SYNTAX INTEGER { oc(0), bc (1), e2etc(2), p2ptc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the clock. oc(0), bc(1), e2etc(2), p2ptc(3). " DEFVAL { bc } ::= { ptpGlobalInfo 24 } ptpGlobalEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Precision Time Protocol (IEEE1588). enable(1), disable(2). " DEFVAL { disable } ::= { ptpGlobalInfo 25 } ptpDomain OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The domain attribute of the local clock. Range 0~255. " DEFVAL { 0 } ::= { ptpGlobalInfo 26 } ptpTcPrimaryDomain OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The primary syntonization domain. Range 0~255. " DEFVAL { 0 } ::= { ptpGlobalInfo 27 } ptpSlaveOnly OBJECT-TYPE SYNTAX INTEGER { disable(2), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Slave-only clock can never enter the MASTER state. Disable(2), Enable(1). " DEFVAL { disable } ::= { ptpGlobalInfo 28 } ptpPriority1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority1 attribute of the local clock. Range 0~255. " DEFVAL { 128 } ::= { ptpGlobalInfo 29 } ptpPriority2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority2 attribute of the local clock. Range 0~255. " DEFVAL { 128 } ::= { ptpGlobalInfo 30 } ptpClockAccuracy OBJECT-TYPE SYNTAX Integer32 (1..19) MAX-ACCESS read-write STATUS current DESCRIPTION "The clock accuracy characterizes a clock for the purpose of the best master clock(BMC) algorithm. Value: 1: The time is accurate to within 25 ns. 2: The time is accurate to within 100 ns. 3: The time is accurate to within 250 ns 4: The time is accurate to within 1 us. 5: The time is accurate to within 2.5 us. 6: The time is accurate to within 10 us. 7: The time is accurate to within 25 us. 8: The time is accurate to within 100 us. 9: The time is accurate to within 250 us. 10: The time is accurate to within 1 ms. 11: The time is accurate to within 2.5 ms. 12: The time is accurate to within 10 ms. 13: The time is accurate to within 25 ms. 14: The time is accurate to within 100 ms. 15: The time is accurate to within 250 ms. 16: The time is accurate to within 1 s. 17: The time is accurate to within 10 s. 18: The time is accurate to > 10 s. 19: The time is accurate to unknown. " -- DEFVAL { 0xFE } ::= { ptpGlobalInfo 31 } ptpClockClass OBJECT-TYPE SYNTAX INTEGER { class6(6), class7(7), class13(13), class14(14), class52(52), class58(58), class187(187), class193(193), class248(248) } MAX-ACCESS read-write STATUS current DESCRIPTION "The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency distributed by the grandmaster clock. Value only is 6,7,13,14,52,58,187,193,248." -- DEFVAL { 0xFE } ::= { ptpGlobalInfo 32 } ptpLeap59 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The last minute of the current UTC day contains 59 seconds. Disable(2), Enable(1). " DEFVAL { disable } ::= { ptpGlobalInfo 33 } ptpLeap61 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The last minute of the current UTC day contains 61 seconds. Disable(2), Enable(1). " DEFVAL { disable } ::= { ptpGlobalInfo 34 } ptpTimeSource OBJECT-TYPE SYNTAX INTEGER { atomic-clock(1), gps(2), internal-oscillator(3), ptp(4), ntp(5), hand-set(6), other(7), terrestrial-radio(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The attribute indicates the source of time used by the local clock. atomic-clock(1), gps(2), internal-oscillator(3), ptp(4), ntp(5), hand-set(6), other(7), terrestrial-radio(8)." DEFVAL { internal-oscillator } ::= { ptpGlobalInfo 35 } ptpClockTodOutput OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable clock tod output. enable(1), disable(2). " DEFVAL { disable } ::= { ptpGlobalInfo 36 } ptpClockSyncInterfaceOutput OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable clock sync interface output. enable(1), disable(2). " DEFVAL { disable } ::= { ptpGlobalInfo 37 } ptpTodPulseDelayCorrection OBJECT-TYPE SYNTAX Integer32 (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The ptp tod pulse delay correction. Range 1~1000000. " DEFVAL { 1 } ::= { ptpGlobalInfo 38 } -- ## 1.2 show ptp interface ptpIfConfigureTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpIfConfigureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Monitor link group." ::= { ptp 2 } ptpIfConfigureEntry OBJECT-TYPE SYNTAX PtpIfConfigureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of Monitor link group." INDEX { ptpIfIndex} ::= { ptpIfConfigureTable 1 } PtpIfConfigureEntry ::= SEQUENCE { ptpIfIndex Integer32, ptpAnnounceInterval Integer32, ptpSyncInterval Integer32, ptpMinDelayreqInterval Integer32, ptpMinPdelayreqInterval Integer32, ptpAnnounceReceiptTimeout Integer32, ptpDelayMechanism INTEGER, ptpEnable INTEGER, ptpAsymmetryCorrection Integer32, ptpProtocolMac INTEGER, ptpUdpSrcIp OCTET STRING, ptpVlanId Integer32, ptpCos Integer32, ptpIfName OCTET STRING, ptpIfState INTEGER, ptpIfStep Integer32, ptpIfPortId OCTET STRING, ptpIfRcvAnn Integer32, ptpIfRcvDelayReq Integer32, ptpIfRcvDelayResp Integer32, ptpIfRcvFollowUp Integer32, ptpIfRcvUnknown Integer32, ptpIfRcvSync Integer32, ptpIfRcvPDelayReq Integer32, ptpIfRcvPDelayResp Integer32, ptpIfRcvPDelayRespFowllowUp Integer32, ptpIfSendAnn Integer32, ptpIfSendDelayReq Integer32, ptpIfSendDelayResp Integer32, ptpIfSendFollowUp Integer32, ptpIfSendUnknown Integer32, ptpIfSendSync Integer32, ptpIfSendPDelayReq Integer32, ptpIfSendPDelayResp Integer32, ptpIfSendPDelayRespFowllowUp Integer32, ptpIfDiscardAnn Integer32, ptpIfDiscardDelayReq Integer32, ptpIfDiscardDelayResp Integer32, ptpIfDiscardFollowUp Integer32, ptpIfDiscardUnknown Integer32, ptpIfDiscardSync Integer32, ptpIfDiscardPDelayReq Integer32, ptpIfDiscardPDelayResp Integer32, ptpIfDiscardPDelayRespFowllowUp Integer32, ptpIfIngressLatency Integer32, ptpIfEgressLatency Integer32 } ptpIfIndex OBJECT-TYPE SYNTAX Integer32 (1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of ptp interface." ::= { ptpIfConfigureEntry 1 } ptpAnnounceInterval OBJECT-TYPE SYNTAX Integer32 (-1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The mean announce interval. Range -1~10. " DEFVAL { 1 } ::= { ptpIfConfigureEntry 2 } ptpSyncInterval OBJECT-TYPE SYNTAX Integer32 (-1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The mean sync interval for multicast messages. Range -1~10. " DEFVAL { 1 } ::= { ptpIfConfigureEntry 3 } ptpMinDelayreqInterval OBJECT-TYPE SYNTAX Integer32 (-1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum delay request interval for multicast messages. Range -1~10. " DEFVAL { 0 } ::= { ptpIfConfigureEntry 4 } ptpMinPdelayreqInterval OBJECT-TYPE SYNTAX Integer32 (-1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum peer delay request interval for multicast messages. Range -1~10. " DEFVAL { 0 } ::= { ptpIfConfigureEntry 5 } ptpAnnounceReceiptTimeout OBJECT-TYPE SYNTAX Integer32 (3..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of announce interval that has to pass without receipt of an Announce message before the occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES. Range 3~255. " DEFVAL { 4 } ::= { ptpIfConfigureEntry 6 } ptpDelayMechanism OBJECT-TYPE SYNTAX INTEGER { normal (1), peer (2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The propagation delay measuring option used by the port in computing meanPathDelay. normal(1).peer(2).disable(3)." DEFVAL { normal } ::= { ptpIfConfigureEntry 7 } ptpEnable OBJECT-TYPE SYNTAX INTEGER { disable(2), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Precision Time Protocol (IEEE1588). Disable(2), Enable(1). " DEFVAL { disable } ::= { ptpIfConfigureEntry 8 } ptpAsymmetryCorrection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The asymmetry correction of the path. Range -2000000 - 2000000. " DEFVAL { 0 } ::= { ptpIfConfigureEntry 9 } ptpProtocolMac OBJECT-TYPE SYNTAX INTEGER { enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transport PTP messages directly over Ethernet frames as specified in IEEE Std 802.3-2005.Note: IF set value (1), ptpUdpSrcIp(11) will invalid. " ::= { ptpIfConfigureEntry 10 } ptpUdpSrcIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Transport PTP messages over the User Datagram Protocol (UDP) as defined in IETF RFC 768 (1980), and Internet Protocol version 4 (IPv4), as defined in IETF RFC 791 (1981). Note: IF set value, ptpProtocolMac(10) will invalid. " ::= { ptpIfConfigureEntry 11 } ptpVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Vlan ID. Range 1~4094. -1 mean delete." ::= { ptpIfConfigureEntry 12 } ptpCos OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Class of Services. Range 0~7. -1 mean delete." ::= { ptpIfConfigureEntry 13 } ptpIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface name. " ::= { ptpIfConfigureEntry 14 } ptpIfState OBJECT-TYPE SYNTAX INTEGER { normal(0), initializing(1), faulty(2), disabled(3), listening(4), premaster(5), master(6), passive(7), uncalibrated(8), slave(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface state." ::= { ptpIfConfigureEntry 15 } ptpIfStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface step." ::= { ptpIfConfigureEntry 16 } ptpIfPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface id." ::= { ptpIfConfigureEntry 17 } ptpIfRcvAnn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive announce packet." ::= { ptpIfConfigureEntry 18 } ptpIfRcvDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive delay packet." ::= { ptpIfConfigureEntry 19 } ptpIfRcvDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive delay response packet." ::= { ptpIfConfigureEntry 20 } ptpIfRcvFollowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive follow up packet." ::= { ptpIfConfigureEntry 21 } ptpIfRcvUnknown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive unknown packet." ::= { ptpIfConfigureEntry 22 } ptpIfRcvSync OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive sync packet." ::= { ptpIfConfigureEntry 23 } ptpIfRcvPDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive peer delay packet." ::= { ptpIfConfigureEntry 24 } ptpIfRcvPDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive delay response packet." ::= { ptpIfConfigureEntry 25 } ptpIfRcvPDelayRespFowllowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface receive delay response follow up packet." ::= { ptpIfConfigureEntry 26 } ptpIfSendAnn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send announce packet." ::= { ptpIfConfigureEntry 27 } ptpIfSendDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send delay request packet." ::= { ptpIfConfigureEntry 28 } ptpIfSendDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send delay response packet." ::= { ptpIfConfigureEntry 29 } ptpIfSendFollowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send follow up packet." ::= { ptpIfConfigureEntry 30 } ptpIfSendUnknown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send unknown packet." ::= { ptpIfConfigureEntry 31 } ptpIfSendSync OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send sync packet." ::= { ptpIfConfigureEntry 32 } ptpIfSendPDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send peer delay request packet." ::= { ptpIfConfigureEntry 33 } ptpIfSendPDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send peer delay response packet." ::= { ptpIfConfigureEntry 34 } ptpIfSendPDelayRespFowllowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface send peer delay response follow up packet." ::= { ptpIfConfigureEntry 35 } ptpIfDiscardAnn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard announce packet." ::= { ptpIfConfigureEntry 36 } ptpIfDiscardDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard delay request packet." ::= { ptpIfConfigureEntry 37 } ptpIfDiscardDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard delay response packet." ::= { ptpIfConfigureEntry 38 } ptpIfDiscardFollowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard follow up packet." ::= { ptpIfConfigureEntry 39 } ptpIfDiscardUnknown OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard unknown packet." ::= { ptpIfConfigureEntry 40 } ptpIfDiscardSync OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard sync packet." ::= { ptpIfConfigureEntry 41 } ptpIfDiscardPDelayReq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard delay request packet." ::= { ptpIfConfigureEntry 42 } ptpIfDiscardPDelayResp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard peer delay response packet." ::= { ptpIfConfigureEntry 43 } ptpIfDiscardPDelayRespFowllowUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp interface discard peer delay response follow up packet." ::= { ptpIfConfigureEntry 44 } ptpIfIngressLatency OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The ptn ingress latency. Range 0~65535. " DEFVAL { 0 } ::= { ptpIfConfigureEntry 45 } ptpIfEgressLatency OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The ptp egress latency. Range 0~65535. " DEFVAL { 0 } ::= { ptpIfConfigureEntry 46 } -- ## 1.3 show ptp foreign-master ptpForeignMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF PtpForeignMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Monitor link group." ::= { ptp 3 } ptpForeignMasterEntry OBJECT-TYPE SYNTAX PtpForeignMasterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of Monitor link group." INDEX { ptpFMIndex, ptpFMNodeIndex} ::= { ptpForeignMasterTable 1 } PtpForeignMasterEntry ::= SEQUENCE { ptpFMIndex Integer32, ptpFMNodeIndex Integer32, ptpFMBest TruthValue, ptpFMClockID OCTET STRING, ptpFMPortNum Integer32, ptpFMQualification Integer32, ptpFMIfName OCTET STRING } ptpFMIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ptp foreign master interface index. " ::= { ptpForeignMasterEntry 1 } ptpFMNodeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ptp foreign master node index. " ::= { ptpForeignMasterEntry 2 } ptpFMBest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The state of foreign master: true(1): best.false(2): not best." ::= { ptpForeignMasterEntry 3 } ptpFMClockID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp foreign master clock id. " ::= { ptpForeignMasterEntry 4 } ptpFMPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp foreign master port num. " ::= { ptpForeignMasterEntry 5 } ptpFMQualification OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp foreign master qualification. " ::= { ptpForeignMasterEntry 6 } ptpFMIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ptp foreign master interface name. " ::= { ptpForeignMasterEntry 7 } ptpNotifications OBJECT IDENTIFIER ::= { ptp 100 } ptpMasterChange NOTIFICATION-TYPE OBJECTS { ptpFMClockID } STATUS current DESCRIPTION "This trap will be generated when timing reference changes." ::= {ptpNotifications 1} ptpIfStateChange NOTIFICATION-TYPE OBJECTS { ptpIfState } STATUS current DESCRIPTION "This trap will be generated when ptp state of an interface changes." ::= {ptpNotifications 2} ptpMasterClockAccuracyChange NOTIFICATION-TYPE OBJECTS { ptpClockAccuracy } STATUS current DESCRIPTION "This trap will be generated when clock accuracy of the master changes." ::= {ptpNotifications 3} --pm OBJECT IDENTIFIER ::= { OID 90 } pmThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF PMThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains all pm threshold information." ::= { pm 1 } pmThresholdEntry OBJECT-TYPE SYNTAX PMThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all pm threshold information." INDEX { pmThresholdIndex } ::= { pmThresholdTable 1 } PMThresholdEntry ::= SEQUENCE { pmThresholdIndex INTEGER, pmThreshold15mValue OCTET STRING, pmThreshold1hValue OCTET STRING, pmThreshold1dValue OCTET STRING } pmThresholdIndex OBJECT-TYPE SYNTAX INTEGER { unit-temperature-min(1), unit-temperature-max(2), sfp-rx-power-min(3), sfp-rx-power-max(4), sfp-tx-power-min(5), sfp-tx-power-max(6), if-dropped-events(7), if-input-packets(8), if-input-bytes(9), if-input-broadcasts(10), if-input-multicasts(11), if-crc-errors(12), if-collisions(13), if-undersized-packets(14), if-oversized-packets(15), if-fragments(16), if-jabbers(17), if-packet-64(18), if-packet-65-127(19), if-packet-128-255(20), if-packet-256-511(21), if-packet-512-1023(22), if-packet-1024(23), if-output-packets(24), if-output-bytes(25), lsp-pe-out-packets(26), lsp-pe-out-bytes(27), lsp-p-east-ingress-packets(28), lsp-p-east-ingress-bytes(29), lsp-p-west-ingress-packets(30), lsp-p-west-ingress-bytes(31), vpws-ingress-packets(32), vpws-ingress-bytes(33), vpws-egress-packets(34), vpws-egress-bytes(35), vpls-ingress-packets(36), vpls-ingress-bytes(37), vpls-egress-packets(38), vpls-egress-bytes(39) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of pm types." ::= { pmThresholdEntry 1 } pmThreshold15mValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for 15min period." ::= { pmThresholdEntry 2 } pmThreshold1hValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for 1hour period." ::= { pmThresholdEntry 3 } pmThreshold1dValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for 1day period." ::= { pmThresholdEntry 4 } pmUnitTempr OBJECT IDENTIFIER ::= { pm 100 } pmUnitTemprCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 1 } pmUnitTemprCurr15mEntry OBJECT-TYPE SYNTAX PMUnitTemprCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprCurr15mIndex } ::= { pmUnitTemprCurr15mTable 1 } PMUnitTemprCurr15mEntry ::= SEQUENCE { pmUnitTemprCurr15mIndex Integer32, pmUnitTemprCurr15mId OCTET STRING, pmUnitTemprCurr15mUnitType INTEGER, pmUnitTemprCurr15mAverage Counter64, pmUnitTemprCurr15mMin Counter64, pmUnitTemprCurr15mMax Counter64, pmUnitTemprCurr15mStartTime DateAndTime, pmUnitTemprCurr15mStopTime DateAndTime } pmUnitTemprCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprCurr15mEntry 1 } pmUnitTemprCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit sensor name." ::= { pmUnitTemprCurr15mEntry 2 } pmUnitTemprCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprCurr15mEntry 3 } pmUnitTemprCurr15mAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of average unit temperature." ::= { pmUnitTemprCurr15mEntry 4 } pmUnitTemprCurr15mMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of minimum unit temperature." ::= { pmUnitTemprCurr15mEntry 5 } pmUnitTemprCurr15mMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of maximum unit temperature." ::= { pmUnitTemprCurr15mEntry 6 } pmUnitTemprCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmUnitTemprCurr15mEntry 100 } pmUnitTemprCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmUnitTemprCurr15mEntry 101 } pmUnitTemprPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 2 } pmUnitTemprPrev15mEntry OBJECT-TYPE SYNTAX PMUnitTemprPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprPrev15mIndex } ::= { pmUnitTemprPrev15mTable 1 } PMUnitTemprPrev15mEntry ::= SEQUENCE { pmUnitTemprPrev15mIndex Integer32, pmUnitTemprPrev15mId OCTET STRING, pmUnitTemprPrev15mUnitType INTEGER, pmUnitTemprPrev15mAverage Counter64, pmUnitTemprPrev15mMin Counter64, pmUnitTemprPrev15mMax Counter64, pmUnitTemprPrev15mStartTime DateAndTime, pmUnitTemprPrev15mStopTime DateAndTime } pmUnitTemprPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprPrev15mEntry 1 } pmUnitTemprPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmUnitTemprPrev15mEntry 2 } pmUnitTemprPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprPrev15mEntry 3 } pmUnitTemprPrev15mAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of average unit temperature." ::= { pmUnitTemprPrev15mEntry 4 } pmUnitTemprPrev15mMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of minimum unit temperature." ::= { pmUnitTemprPrev15mEntry 5 } pmUnitTemprPrev15mMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of maximum unit temperature." ::= { pmUnitTemprPrev15mEntry 6 } pmUnitTemprPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmUnitTemprPrev15mEntry 100 } pmUnitTemprPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmUnitTemprPrev15mEntry 101 } pmUnitTemprCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 3 } pmUnitTemprCurr1hEntry OBJECT-TYPE SYNTAX PMUnitTemprCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprCurr1hIndex } ::= { pmUnitTemprCurr1hTable 1 } PMUnitTemprCurr1hEntry ::= SEQUENCE { pmUnitTemprCurr1hIndex Integer32, pmUnitTemprCurr1hId OCTET STRING, pmUnitTemprCurr1hUnitType INTEGER, pmUnitTemprCurr1hAverage Counter64, pmUnitTemprCurr1hMin Counter64, pmUnitTemprCurr1hMax Counter64, pmUnitTemprCurr1hStartTime DateAndTime, pmUnitTemprCurr1hStopTime DateAndTime } pmUnitTemprCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprCurr1hEntry 1 } pmUnitTemprCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit sensor name." ::= { pmUnitTemprCurr1hEntry 2 } pmUnitTemprCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprCurr1hEntry 3 } pmUnitTemprCurr1hAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of average unit temperature." ::= { pmUnitTemprCurr1hEntry 4 } pmUnitTemprCurr1hMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of minimum unit temperature." ::= { pmUnitTemprCurr1hEntry 5 } pmUnitTemprCurr1hMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of maximum unit temperature." ::= { pmUnitTemprCurr1hEntry 6 } pmUnitTemprCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmUnitTemprCurr1hEntry 100 } pmUnitTemprCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmUnitTemprCurr1hEntry 101 } pmUnitTemprPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 4 } pmUnitTemprPrev1hEntry OBJECT-TYPE SYNTAX PMUnitTemprPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprPrev1hIndex } ::= { pmUnitTemprPrev1hTable 1 } PMUnitTemprPrev1hEntry ::= SEQUENCE { pmUnitTemprPrev1hIndex Integer32, pmUnitTemprPrev1hId OCTET STRING, pmUnitTemprPrev1hUnitType INTEGER, pmUnitTemprPrev1hAverage Counter64, pmUnitTemprPrev1hMin Counter64, pmUnitTemprPrev1hMax Counter64, pmUnitTemprPrev1hStartTime DateAndTime, pmUnitTemprPrev1hStopTime DateAndTime } pmUnitTemprPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprPrev1hEntry 1 } pmUnitTemprPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmUnitTemprPrev1hEntry 2 } pmUnitTemprPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprPrev1hEntry 3 } pmUnitTemprPrev1hAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of average unit temperature." ::= { pmUnitTemprPrev1hEntry 4 } pmUnitTemprPrev1hMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of minimum unit temperature." ::= { pmUnitTemprPrev1hEntry 5 } pmUnitTemprPrev1hMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of maximum unit temperature." ::= { pmUnitTemprPrev1hEntry 6 } pmUnitTemprPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmUnitTemprPrev1hEntry 100 } pmUnitTemprPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmUnitTemprPrev1hEntry 101 } pmUnitTemprCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 5 } pmUnitTemprCurr1dEntry OBJECT-TYPE SYNTAX PMUnitTemprCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprCurr1dIndex } ::= { pmUnitTemprCurr1dTable 1 } PMUnitTemprCurr1dEntry ::= SEQUENCE { pmUnitTemprCurr1dIndex Integer32, pmUnitTemprCurr1dId OCTET STRING, pmUnitTemprCurr1dUnitType INTEGER, pmUnitTemprCurr1dAverage Counter64, pmUnitTemprCurr1dMin Counter64, pmUnitTemprCurr1dMax Counter64, pmUnitTemprCurr1dStartTime DateAndTime, pmUnitTemprCurr1dStopTime DateAndTime } pmUnitTemprCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprCurr1dEntry 1 } pmUnitTemprCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmUnitTemprCurr1dEntry 2 } pmUnitTemprCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprCurr1dEntry 3 } pmUnitTemprCurr1dAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of average unit temperature." ::= { pmUnitTemprCurr1dEntry 4 } pmUnitTemprCurr1dMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of minimum unit temperature." ::= { pmUnitTemprCurr1dEntry 5 } pmUnitTemprCurr1dMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of maximum unit temperature." ::= { pmUnitTemprCurr1dEntry 6 } pmUnitTemprCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmUnitTemprCurr1dEntry 100 } pmUnitTemprCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmUnitTemprCurr1dEntry 101 } pmUnitTemprPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMUnitTemprPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 6 } pmUnitTemprPrev1dEntry OBJECT-TYPE SYNTAX PMUnitTemprPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmUnitTemprPrev1dIndex } ::= { pmUnitTemprPrev1dTable 1 } PMUnitTemprPrev1dEntry ::= SEQUENCE { pmUnitTemprPrev1dIndex Integer32, pmUnitTemprPrev1dId OCTET STRING, pmUnitTemprPrev1dUnitType INTEGER, pmUnitTemprPrev1dAverage Counter64, pmUnitTemprPrev1dMin Counter64, pmUnitTemprPrev1dMax Counter64, pmUnitTemprPrev1dStartTime DateAndTime, pmUnitTemprPrev1dStopTime DateAndTime } pmUnitTemprPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmUnitTemprPrev1dEntry 1 } pmUnitTemprPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmUnitTemprPrev1dEntry 2 } pmUnitTemprPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmUnitTemprPrev1dEntry 3 } pmUnitTemprPrev1dAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of average unit temperature." ::= { pmUnitTemprPrev1dEntry 4 } pmUnitTemprPrev1dMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of minimu unit temperature." ::= { pmUnitTemprPrev1dEntry 5 } pmUnitTemprPrev1dMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of maximum unit temperature." ::= { pmUnitTemprPrev1dEntry 6 } pmUnitTemprPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day start time." ::= { pmUnitTemprPrev1dEntry 100 } pmUnitTemprPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day stop time." ::= { pmUnitTemprPrev1dEntry 101 } pmTcaUnitTemprMin15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 7 } pmTcaUnitTemprMin15mEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMin15mIndex } ::= { pmTcaUnitTemprMin15mTable 1 } PMTcaUnitTemprMin15mEntry ::= SEQUENCE { pmTcaUnitTemprMin15mIndex Integer32, pmTcaUnitTemprMin15mId OCTET STRING, pmTcaUnitTemprMin15mUnitType INTEGER, pmTcaUnitTemprMin15mCnt Counter64, pmTcaUnitTemprMin15mThreshold Counter64, pmTcaUnitTemprMin15mOccurTime DateAndTime } pmTcaUnitTemprMin15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMin15mEntry 1 } pmTcaUnitTemprMin15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmTcaUnitTemprMin15mEntry 2 } pmTcaUnitTemprMin15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMin15mEntry 3 } pmTcaUnitTemprMin15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaUnitTemprMin15mEntry 4 } pmTcaUnitTemprMin15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaUnitTemprMin15mEntry 5 } pmTcaUnitTemprMin15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMin15mEntry 6 } pmTcaUnitTemprMin1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 8 } pmTcaUnitTemprMin1hEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMin1hIndex } ::= { pmTcaUnitTemprMin1hTable 1 } PMTcaUnitTemprMin1hEntry ::= SEQUENCE { pmTcaUnitTemprMin1hIndex Integer32, pmTcaUnitTemprMin1hId OCTET STRING, pmTcaUnitTemprMin1hUnitType INTEGER, pmTcaUnitTemprMin1hCnt Counter64, pmTcaUnitTemprMin1hThreshold Counter64, pmTcaUnitTemprMin1hOccurTime DateAndTime } pmTcaUnitTemprMin1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMin1hEntry 1 } pmTcaUnitTemprMin1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmTcaUnitTemprMin1hEntry 2 } pmTcaUnitTemprMin1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMin1hEntry 3 } pmTcaUnitTemprMin1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaUnitTemprMin1hEntry 4 } pmTcaUnitTemprMin1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaUnitTemprMin1hEntry 5 } pmTcaUnitTemprMin1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMin1hEntry 6 } pmTcaUnitTemprMin1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 9 } pmTcaUnitTemprMin1dEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMin1dIndex } ::= { pmTcaUnitTemprMin1dTable 1 } PMTcaUnitTemprMin1dEntry ::= SEQUENCE { pmTcaUnitTemprMin1dIndex Integer32, pmTcaUnitTemprMin1dId OCTET STRING, pmTcaUnitTemprMin1dUnitType INTEGER, pmTcaUnitTemprMin1dCnt Counter64, pmTcaUnitTemprMin1dThreshold Counter64, pmTcaUnitTemprMin1dOccurTime DateAndTime } pmTcaUnitTemprMin1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMin1dEntry 1 } pmTcaUnitTemprMin1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmTcaUnitTemprMin1dEntry 2 } pmTcaUnitTemprMin1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMin1dEntry 3 } pmTcaUnitTemprMin1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaUnitTemprMin1dEntry 4 } pmTcaUnitTemprMin1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaUnitTemprMin1dEntry 5 } pmTcaUnitTemprMin1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMin1dEntry 6 } pmTcaUnitTemprMax15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 10 } pmTcaUnitTemprMax15mEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMax15mIndex } ::= { pmTcaUnitTemprMax15mTable 1 } PMTcaUnitTemprMax15mEntry ::= SEQUENCE { pmTcaUnitTemprMax15mIndex Integer32, pmTcaUnitTemprMax15mId OCTET STRING, pmTcaUnitTemprMax15mUnitType INTEGER, pmTcaUnitTemprMax15mCnt Counter64, pmTcaUnitTemprMax15mThreshold Counter64, pmTcaUnitTemprMax15mOccurTime DateAndTime } pmTcaUnitTemprMax15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMax15mEntry 1 } pmTcaUnitTemprMax15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmTcaUnitTemprMax15mEntry 2 } pmTcaUnitTemprMax15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMax15mEntry 3 } pmTcaUnitTemprMax15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaUnitTemprMax15mEntry 4 } pmTcaUnitTemprMax15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaUnitTemprMax15mEntry 5 } pmTcaUnitTemprMax15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMax15mEntry 6 } pmTcaUnitTemprMax1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 11 } pmTcaUnitTemprMax1hEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMax1hIndex } ::= { pmTcaUnitTemprMax1hTable 1 } PMTcaUnitTemprMax1hEntry ::= SEQUENCE { pmTcaUnitTemprMax1hIndex Integer32, pmTcaUnitTemprMax1hId OCTET STRING, pmTcaUnitTemprMax1hUnitType INTEGER, pmTcaUnitTemprMax1hCnt Counter64, pmTcaUnitTemprMax1hThreshold Counter64, pmTcaUnitTemprMax1hOccurTime DateAndTime } pmTcaUnitTemprMax1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMax1hEntry 1 } pmTcaUnitTemprMax1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Sensor name." ::= { pmTcaUnitTemprMax1hEntry 2 } pmTcaUnitTemprMax1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMax1hEntry 3 } pmTcaUnitTemprMax1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaUnitTemprMax1hEntry 4 } pmTcaUnitTemprMax1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaUnitTemprMax1hEntry 5 } pmTcaUnitTemprMax1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMax1hEntry 6 } pmTcaUnitTemprMax1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaUnitTemprMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmUnitTempr 12 } pmTcaUnitTemprMax1dEntry OBJECT-TYPE SYNTAX PMTcaUnitTemprMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaUnitTemprMax1dIndex } ::= { pmTcaUnitTemprMax1dTable 1 } PMTcaUnitTemprMax1dEntry ::= SEQUENCE { pmTcaUnitTemprMax1dIndex Integer32, pmTcaUnitTemprMax1dId OCTET STRING, pmTcaUnitTemprMax1dUnitType INTEGER, pmTcaUnitTemprMax1dCnt Counter64, pmTcaUnitTemprMax1dThreshold Counter64, pmTcaUnitTemprMax1dOccurTime DateAndTime } pmTcaUnitTemprMax1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaUnitTemprMax1dEntry 1 } pmTcaUnitTemprMax1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaUnitTemprMax1dEntry 2 } pmTcaUnitTemprMax1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaUnitTemprMax1dEntry 3 } pmTcaUnitTemprMax1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaUnitTemprMax1dEntry 4 } pmTcaUnitTemprMax1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaUnitTemprMax1dEntry 5 } pmTcaUnitTemprMax1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaUnitTemprMax1dEntry 6 } pmSFPPower OBJECT IDENTIFIER ::= { pm 101 } pmSFPPowerCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 1 } pmSFPPowerCurr15mEntry OBJECT-TYPE SYNTAX PMSFPPowerCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerCurr15mIndex } ::= { pmSFPPowerCurr15mTable 1 } PMSFPPowerCurr15mEntry ::= SEQUENCE { pmSFPPowerCurr15mIndex Integer32, pmSFPPowerCurr15mId OCTET STRING, pmSFPPowerCurr15mUnitType INTEGER, pmSFPPowerCurr15mRxAverage Counter64, pmSFPPowerCurr15mRxMin Counter64, pmSFPPowerCurr15mRxMax Counter64, pmSFPPowerCurr15mTxAverage Counter64, pmSFPPowerCurr15mTxMin Counter64, pmSFPPowerCurr15mTxMax Counter64, pmSFPPowerCurr15mStartTime DateAndTime, pmSFPPowerCurr15mStopTime DateAndTime } pmSFPPowerCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerCurr15mEntry 1 } pmSFPPowerCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerCurr15mEntry 2 } pmSFPPowerCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerCurr15mEntry 3 } pmSFPPowerCurr15mRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of average sfp rx power." ::= { pmSFPPowerCurr15mEntry 4 } pmSFPPowerCurr15mRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of minimum sfp rx power." ::= { pmSFPPowerCurr15mEntry 5 } pmSFPPowerCurr15mRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of maximum sfp rx power." ::= { pmSFPPowerCurr15mEntry 6 } pmSFPPowerCurr15mTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of average sfp tx power." ::= { pmSFPPowerCurr15mEntry 7 } pmSFPPowerCurr15mTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of minimum sfp tx power." ::= { pmSFPPowerCurr15mEntry 8 } pmSFPPowerCurr15mTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of maximum sfp tx power." ::= { pmSFPPowerCurr15mEntry 9 } pmSFPPowerCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmSFPPowerCurr15mEntry 100 } pmSFPPowerCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmSFPPowerCurr15mEntry 101 } pmSFPPowerPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 2 } pmSFPPowerPrev15mEntry OBJECT-TYPE SYNTAX PMSFPPowerPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerPrev15mIndex } ::= { pmSFPPowerPrev15mTable 1 } PMSFPPowerPrev15mEntry ::= SEQUENCE { pmSFPPowerPrev15mIndex Integer32, pmSFPPowerPrev15mId OCTET STRING, pmSFPPowerPrev15mUnitType INTEGER, pmSFPPowerPrev15mRxAverage Counter64, pmSFPPowerPrev15mRxMin Counter64, pmSFPPowerPrev15mRxMax Counter64, pmSFPPowerPrev15mTxAverage Counter64, pmSFPPowerPrev15mTxMin Counter64, pmSFPPowerPrev15mTxMax Counter64, pmSFPPowerPrev15mStartTime DateAndTime, pmSFPPowerPrev15mStopTime DateAndTime } pmSFPPowerPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerPrev15mEntry 1 } pmSFPPowerPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerPrev15mEntry 2 } pmSFPPowerPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerPrev15mEntry 3 } pmSFPPowerPrev15mRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of average sfp rx power." ::= { pmSFPPowerPrev15mEntry 4 } pmSFPPowerPrev15mRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of minimum sfp rx power." ::= { pmSFPPowerPrev15mEntry 5 } pmSFPPowerPrev15mRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of maximum sfp rx power." ::= { pmSFPPowerPrev15mEntry 6 } pmSFPPowerPrev15mTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of average sfp tx power." ::= { pmSFPPowerPrev15mEntry 7 } pmSFPPowerPrev15mTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of minimum sfp tx power." ::= { pmSFPPowerPrev15mEntry 8 } pmSFPPowerPrev15mTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of maximum sfp tx power." ::= { pmSFPPowerPrev15mEntry 9 } pmSFPPowerPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmSFPPowerPrev15mEntry 100 } pmSFPPowerPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmSFPPowerPrev15mEntry 101 } pmSFPPowerCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 3 } pmSFPPowerCurr1hEntry OBJECT-TYPE SYNTAX PMSFPPowerCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerCurr1hIndex } ::= { pmSFPPowerCurr1hTable 1 } PMSFPPowerCurr1hEntry ::= SEQUENCE { pmSFPPowerCurr1hIndex Integer32, pmSFPPowerCurr1hId OCTET STRING, pmSFPPowerCurr1hUnitType INTEGER, pmSFPPowerCurr1hRxAverage Counter64, pmSFPPowerCurr1hRxMin Counter64, pmSFPPowerCurr1hRxMax Counter64, pmSFPPowerCurr1hTxAverage Counter64, pmSFPPowerCurr1hTxMin Counter64, pmSFPPowerCurr1hTxMax Counter64, pmSFPPowerCurr1hStartTime DateAndTime, pmSFPPowerCurr1hStopTime DateAndTime } pmSFPPowerCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerCurr1hEntry 1 } pmSFPPowerCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerCurr1hEntry 2 } pmSFPPowerCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerCurr1hEntry 3 } pmSFPPowerCurr1hRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of average sfp rx power." ::= { pmSFPPowerCurr1hEntry 4 } pmSFPPowerCurr1hRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of minimum sfp rx power." ::= { pmSFPPowerCurr1hEntry 5 } pmSFPPowerCurr1hRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of maximum sfp rx power." ::= { pmSFPPowerCurr1hEntry 6 } pmSFPPowerCurr1hTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of average sfp tx power." ::= { pmSFPPowerCurr1hEntry 7 } pmSFPPowerCurr1hTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of minimum sfp tx power." ::= { pmSFPPowerCurr1hEntry 8 } pmSFPPowerCurr1hTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of maximum sfp tx power." ::= { pmSFPPowerCurr1hEntry 9 } pmSFPPowerCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmSFPPowerCurr1hEntry 100 } pmSFPPowerCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmSFPPowerCurr1hEntry 101 } pmSFPPowerPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 4 } pmSFPPowerPrev1hEntry OBJECT-TYPE SYNTAX PMSFPPowerPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerPrev1hIndex } ::= { pmSFPPowerPrev1hTable 1 } PMSFPPowerPrev1hEntry ::= SEQUENCE { pmSFPPowerPrev1hIndex Integer32, pmSFPPowerPrev1hId OCTET STRING, pmSFPPowerPrev1hUnitType INTEGER, pmSFPPowerPrev1hRxAverage Counter64, pmSFPPowerPrev1hRxMin Counter64, pmSFPPowerPrev1hRxMax Counter64, pmSFPPowerPrev1hTxAverage Counter64, pmSFPPowerPrev1hTxMin Counter64, pmSFPPowerPrev1hTxMax Counter64, pmSFPPowerPrev1hStartTime DateAndTime, pmSFPPowerPrev1hStopTime DateAndTime } pmSFPPowerPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerPrev1hEntry 1 } pmSFPPowerPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerPrev1hEntry 2 } pmSFPPowerPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerPrev1hEntry 3 } pmSFPPowerPrev1hRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of average sfp rx power." ::= { pmSFPPowerPrev1hEntry 4 } pmSFPPowerPrev1hRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of minimum sfp rx power." ::= { pmSFPPowerPrev1hEntry 5 } pmSFPPowerPrev1hRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of maximum sfp rx power." ::= { pmSFPPowerPrev1hEntry 6 } pmSFPPowerPrev1hTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of average sfp tx power." ::= { pmSFPPowerPrev1hEntry 7 } pmSFPPowerPrev1hTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of minimum sfp tx power." ::= { pmSFPPowerPrev1hEntry 8 } pmSFPPowerPrev1hTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of maximum sfp tx power." ::= { pmSFPPowerPrev1hEntry 9 } pmSFPPowerPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmSFPPowerPrev1hEntry 100 } pmSFPPowerPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmSFPPowerPrev1hEntry 101 } pmSFPPowerCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 5 } pmSFPPowerCurr1dEntry OBJECT-TYPE SYNTAX PMSFPPowerCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerCurr1dIndex } ::= { pmSFPPowerCurr1dTable 1 } PMSFPPowerCurr1dEntry ::= SEQUENCE { pmSFPPowerCurr1dIndex Integer32, pmSFPPowerCurr1dId OCTET STRING, pmSFPPowerCurr1dUnitType INTEGER, pmSFPPowerCurr1dRxAverage Counter64, pmSFPPowerCurr1dRxMin Counter64, pmSFPPowerCurr1dRxMax Counter64, pmSFPPowerCurr1dTxAverage Counter64, pmSFPPowerCurr1dTxMin Counter64, pmSFPPowerCurr1dTxMax Counter64, pmSFPPowerCurr1dStartTime DateAndTime, pmSFPPowerCurr1dStopTime DateAndTime } pmSFPPowerCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerCurr1dEntry 1 } pmSFPPowerCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerCurr1dEntry 2 } pmSFPPowerCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerCurr1dEntry 3 } pmSFPPowerCurr1dRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of average sfp rx power." ::= { pmSFPPowerCurr1dEntry 4 } pmSFPPowerCurr1dRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of minimum sfp rx power." ::= { pmSFPPowerCurr1dEntry 5 } pmSFPPowerCurr1dRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of maximum sfp rx power." ::= { pmSFPPowerCurr1dEntry 6 } pmSFPPowerCurr1dTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of average sfp tx power." ::= { pmSFPPowerCurr1dEntry 7 } pmSFPPowerCurr1dTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of minimum sfp tx power." ::= { pmSFPPowerCurr1dEntry 8 } pmSFPPowerCurr1dTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of maximum sfp tx power." ::= { pmSFPPowerCurr1dEntry 9 } pmSFPPowerCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmSFPPowerCurr1dEntry 100 } pmSFPPowerCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmSFPPowerCurr1dEntry 101 } pmSFPPowerPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMSFPPowerPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 6 } pmSFPPowerPrev1dEntry OBJECT-TYPE SYNTAX PMSFPPowerPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmSFPPowerPrev1dIndex } ::= { pmSFPPowerPrev1dTable 1 } PMSFPPowerPrev1dEntry ::= SEQUENCE { pmSFPPowerPrev1dIndex Integer32, pmSFPPowerPrev1dId OCTET STRING, pmSFPPowerPrev1dUnitType INTEGER, pmSFPPowerPrev1dRxAverage Counter64, pmSFPPowerPrev1dRxMin Counter64, pmSFPPowerPrev1dRxMax Counter64, pmSFPPowerPrev1dTxAverage Counter64, pmSFPPowerPrev1dTxMin Counter64, pmSFPPowerPrev1dTxMax Counter64, pmSFPPowerPrev1dStartTime DateAndTime, pmSFPPowerPrev1dStopTime DateAndTime } pmSFPPowerPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmSFPPowerPrev1dEntry 1 } pmSFPPowerPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "SFP name." ::= { pmSFPPowerPrev1dEntry 2 } pmSFPPowerPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmSFPPowerPrev1dEntry 3 } pmSFPPowerPrev1dRxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of average sfp rx power." ::= { pmSFPPowerPrev1dEntry 4 } pmSFPPowerPrev1dRxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of minimum sfp rx power." ::= { pmSFPPowerPrev1dEntry 5 } pmSFPPowerPrev1dRxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of maximum sfp rx power." ::= { pmSFPPowerPrev1dEntry 6 } pmSFPPowerPrev1dTxAverage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of average sfp tx power." ::= { pmSFPPowerPrev1dEntry 7 } pmSFPPowerPrev1dTxMin OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of minimum sfp tx power." ::= { pmSFPPowerPrev1dEntry 8 } pmSFPPowerPrev1dTxMax OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of maximum sfp tx power." ::= { pmSFPPowerPrev1dEntry 9 } pmSFPPowerPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day start time." ::= { pmSFPPowerPrev1dEntry 100 } pmSFPPowerPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day stop time." ::= { pmSFPPowerPrev1dEntry 101 } pmTcaSFPRxPowerMin15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 7 } pmTcaSFPRxPowerMin15mEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMin15mIndex } ::= { pmTcaSFPRxPowerMin15mTable 1 } PMTcaSFPRxPowerMin15mEntry ::= SEQUENCE { pmTcaSFPRxPowerMin15mIndex Integer32, pmTcaSFPRxPowerMin15mId OCTET STRING, pmTcaSFPRxPowerMin15mUnitType INTEGER, pmTcaSFPRxPowerMin15mCnt Counter64, pmTcaSFPRxPowerMin15mThreshold Counter64, pmTcaSFPRxPowerMin15mOccurTime DateAndTime } pmTcaSFPRxPowerMin15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMin15mEntry 1 } pmTcaSFPRxPowerMin15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMin15mEntry 2 } pmTcaSFPRxPowerMin15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMin15mEntry 3 } pmTcaSFPRxPowerMin15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaSFPRxPowerMin15mEntry 4 } pmTcaSFPRxPowerMin15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaSFPRxPowerMin15mEntry 5 } pmTcaSFPRxPowerMin15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMin15mEntry 6 } pmTcaSFPRxPowerMin1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 8 } pmTcaSFPRxPowerMin1hEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMin1hIndex } ::= { pmTcaSFPRxPowerMin1hTable 1 } PMTcaSFPRxPowerMin1hEntry ::= SEQUENCE { pmTcaSFPRxPowerMin1hIndex Integer32, pmTcaSFPRxPowerMin1hId OCTET STRING, pmTcaSFPRxPowerMin1hUnitType INTEGER, pmTcaSFPRxPowerMin1hCnt Counter64, pmTcaSFPRxPowerMin1hThreshold Counter64, pmTcaSFPRxPowerMin1hOccurTime DateAndTime } pmTcaSFPRxPowerMin1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMin1hEntry 1 } pmTcaSFPRxPowerMin1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMin1hEntry 2 } pmTcaSFPRxPowerMin1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMin1hEntry 3 } pmTcaSFPRxPowerMin1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaSFPRxPowerMin1hEntry 4 } pmTcaSFPRxPowerMin1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaSFPRxPowerMin1hEntry 5 } pmTcaSFPRxPowerMin1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMin1hEntry 6 } pmTcaSFPRxPowerMin1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 9 } pmTcaSFPRxPowerMin1dEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMin1dIndex } ::= { pmTcaSFPRxPowerMin1dTable 1 } PMTcaSFPRxPowerMin1dEntry ::= SEQUENCE { pmTcaSFPRxPowerMin1dIndex Integer32, pmTcaSFPRxPowerMin1dId OCTET STRING, pmTcaSFPRxPowerMin1dUnitType INTEGER, pmTcaSFPRxPowerMin1dCnt Counter64, pmTcaSFPRxPowerMin1dThreshold Counter64, pmTcaSFPRxPowerMin1dOccurTime DateAndTime } pmTcaSFPRxPowerMin1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMin1dEntry 1 } pmTcaSFPRxPowerMin1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMin1dEntry 2 } pmTcaSFPRxPowerMin1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMin1dEntry 3 } pmTcaSFPRxPowerMin1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaSFPRxPowerMin1dEntry 4 } pmTcaSFPRxPowerMin1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaSFPRxPowerMin1dEntry 5 } pmTcaSFPRxPowerMin1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMin1dEntry 6 } pmTcaSFPRxPowerMax15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 10 } pmTcaSFPRxPowerMax15mEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMax15mIndex } ::= { pmTcaSFPRxPowerMax15mTable 1 } PMTcaSFPRxPowerMax15mEntry ::= SEQUENCE { pmTcaSFPRxPowerMax15mIndex Integer32, pmTcaSFPRxPowerMax15mId OCTET STRING, pmTcaSFPRxPowerMax15mUnitType INTEGER, pmTcaSFPRxPowerMax15mCnt Counter64, pmTcaSFPRxPowerMax15mThreshold Counter64, pmTcaSFPRxPowerMax15mOccurTime DateAndTime } pmTcaSFPRxPowerMax15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMax15mEntry 1 } pmTcaSFPRxPowerMax15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMax15mEntry 2 } pmTcaSFPRxPowerMax15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMax15mEntry 3 } pmTcaSFPRxPowerMax15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaSFPRxPowerMax15mEntry 4 } pmTcaSFPRxPowerMax15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaSFPRxPowerMax15mEntry 5 } pmTcaSFPRxPowerMax15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMax15mEntry 6 } pmTcaSFPRxPowerMax1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 11 } pmTcaSFPRxPowerMax1hEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMax1hIndex } ::= { pmTcaSFPRxPowerMax1hTable 1 } PMTcaSFPRxPowerMax1hEntry ::= SEQUENCE { pmTcaSFPRxPowerMax1hIndex Integer32, pmTcaSFPRxPowerMax1hId OCTET STRING, pmTcaSFPRxPowerMax1hUnitType INTEGER, pmTcaSFPRxPowerMax1hCnt Counter64, pmTcaSFPRxPowerMax1hThreshold Counter64, pmTcaSFPRxPowerMax1hOccurTime DateAndTime } pmTcaSFPRxPowerMax1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMax1hEntry 1 } pmTcaSFPRxPowerMax1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMax1hEntry 2 } pmTcaSFPRxPowerMax1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMax1hEntry 3 } pmTcaSFPRxPowerMax1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaSFPRxPowerMax1hEntry 4 } pmTcaSFPRxPowerMax1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaSFPRxPowerMax1hEntry 5 } pmTcaSFPRxPowerMax1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMax1hEntry 6 } pmTcaSFPRxPowerMax1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 12 } pmTcaSFPRxPowerMax1dEntry OBJECT-TYPE SYNTAX PMTcaSFPRxPowerMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPRxPowerMax1dIndex } ::= { pmTcaSFPRxPowerMax1dTable 1 } PMTcaSFPRxPowerMax1dEntry ::= SEQUENCE { pmTcaSFPRxPowerMax1dIndex Integer32, pmTcaSFPRxPowerMax1dId OCTET STRING, pmTcaSFPRxPowerMax1dUnitType INTEGER, pmTcaSFPRxPowerMax1dCnt Counter64, pmTcaSFPRxPowerMax1dThreshold Counter64, pmTcaSFPRxPowerMax1dOccurTime DateAndTime } pmTcaSFPRxPowerMax1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPRxPowerMax1dEntry 1 } pmTcaSFPRxPowerMax1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPRxPowerMax1dEntry 2 } pmTcaSFPRxPowerMax1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPRxPowerMax1dEntry 3 } pmTcaSFPRxPowerMax1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaSFPRxPowerMax1dEntry 4 } pmTcaSFPRxPowerMax1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaSFPRxPowerMax1dEntry 5 } pmTcaSFPRxPowerMax1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPRxPowerMax1dEntry 6 } pmTcaSFPTxPowerMin15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 13 } pmTcaSFPTxPowerMin15mEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMin15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMin15mIndex } ::= { pmTcaSFPTxPowerMin15mTable 1 } PMTcaSFPTxPowerMin15mEntry ::= SEQUENCE { pmTcaSFPTxPowerMin15mIndex Integer32, pmTcaSFPTxPowerMin15mId OCTET STRING, pmTcaSFPTxPowerMin15mUnitType INTEGER, pmTcaSFPTxPowerMin15mCnt Counter64, pmTcaSFPTxPowerMin15mThreshold Counter64, pmTcaSFPTxPowerMin15mOccurTime DateAndTime } pmTcaSFPTxPowerMin15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMin15mEntry 1 } pmTcaSFPTxPowerMin15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMin15mEntry 2 } pmTcaSFPTxPowerMin15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMin15mEntry 3 } pmTcaSFPTxPowerMin15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaSFPTxPowerMin15mEntry 4 } pmTcaSFPTxPowerMin15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaSFPTxPowerMin15mEntry 5 } pmTcaSFPTxPowerMin15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMin15mEntry 6 } pmTcaSFPTxPowerMin1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 14 } pmTcaSFPTxPowerMin1hEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMin1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMin1hIndex } ::= { pmTcaSFPTxPowerMin1hTable 1 } PMTcaSFPTxPowerMin1hEntry ::= SEQUENCE { pmTcaSFPTxPowerMin1hIndex Integer32, pmTcaSFPTxPowerMin1hId OCTET STRING, pmTcaSFPTxPowerMin1hUnitType INTEGER, pmTcaSFPTxPowerMin1hCnt Counter64, pmTcaSFPTxPowerMin1hThreshold Counter64, pmTcaSFPTxPowerMin1hOccurTime DateAndTime } pmTcaSFPTxPowerMin1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMin1hEntry 1 } pmTcaSFPTxPowerMin1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMin1hEntry 2 } pmTcaSFPTxPowerMin1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMin1hEntry 3 } pmTcaSFPTxPowerMin1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaSFPTxPowerMin1hEntry 4 } pmTcaSFPTxPowerMin1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaSFPTxPowerMin1hEntry 5 } pmTcaSFPTxPowerMin1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMin1hEntry 6 } pmTcaSFPTxPowerMin1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 15 } pmTcaSFPTxPowerMin1dEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMin1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMin1dIndex } ::= { pmTcaSFPTxPowerMin1dTable 1 } PMTcaSFPTxPowerMin1dEntry ::= SEQUENCE { pmTcaSFPTxPowerMin1dIndex Integer32, pmTcaSFPTxPowerMin1dId OCTET STRING, pmTcaSFPTxPowerMin1dUnitType INTEGER, pmTcaSFPTxPowerMin1dCnt Counter64, pmTcaSFPTxPowerMin1dThreshold Counter64, pmTcaSFPTxPowerMin1dOccurTime DateAndTime } pmTcaSFPTxPowerMin1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMin1dEntry 1 } pmTcaSFPTxPowerMin1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMin1dEntry 2 } pmTcaSFPTxPowerMin1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMin1dEntry 3 } pmTcaSFPTxPowerMin1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaSFPTxPowerMin1dEntry 4 } pmTcaSFPTxPowerMin1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaSFPTxPowerMin1dEntry 5 } pmTcaSFPTxPowerMin1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMin1dEntry 6 } pmTcaSFPTxPowerMax15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 16 } pmTcaSFPTxPowerMax15mEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMax15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMax15mIndex } ::= { pmTcaSFPTxPowerMax15mTable 1 } PMTcaSFPTxPowerMax15mEntry ::= SEQUENCE { pmTcaSFPTxPowerMax15mIndex Integer32, pmTcaSFPTxPowerMax15mId OCTET STRING, pmTcaSFPTxPowerMax15mUnitType INTEGER, pmTcaSFPTxPowerMax15mCnt Counter64, pmTcaSFPTxPowerMax15mThreshold Counter64, pmTcaSFPTxPowerMax15mOccurTime DateAndTime } pmTcaSFPTxPowerMax15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMax15mEntry 1 } pmTcaSFPTxPowerMax15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMax15mEntry 2 } pmTcaSFPTxPowerMax15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMax15mEntry 3 } pmTcaSFPTxPowerMax15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of unit temperature." ::= { pmTcaSFPTxPowerMax15mEntry 4 } pmTcaSFPTxPowerMax15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of unit temperature." ::= { pmTcaSFPTxPowerMax15mEntry 5 } pmTcaSFPTxPowerMax15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMax15mEntry 6 } pmTcaSFPTxPowerMax1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 17 } pmTcaSFPTxPowerMax1hEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMax1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMax1hIndex } ::= { pmTcaSFPTxPowerMax1hTable 1 } PMTcaSFPTxPowerMax1hEntry ::= SEQUENCE { pmTcaSFPTxPowerMax1hIndex Integer32, pmTcaSFPTxPowerMax1hId OCTET STRING, pmTcaSFPTxPowerMax1hUnitType INTEGER, pmTcaSFPTxPowerMax1hCnt Counter64, pmTcaSFPTxPowerMax1hThreshold Counter64, pmTcaSFPTxPowerMax1hOccurTime DateAndTime } pmTcaSFPTxPowerMax1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMax1hEntry 1 } pmTcaSFPTxPowerMax1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMax1hEntry 2 } pmTcaSFPTxPowerMax1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMax1hEntry 3 } pmTcaSFPTxPowerMax1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of unit temperature." ::= { pmTcaSFPTxPowerMax1hEntry 4 } pmTcaSFPTxPowerMax1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of unit temperature." ::= { pmTcaSFPTxPowerMax1hEntry 5 } pmTcaSFPTxPowerMax1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMax1hEntry 6 } pmTcaSFPTxPowerMax1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmSFPPower 18 } pmTcaSFPTxPowerMax1dEntry OBJECT-TYPE SYNTAX PMTcaSFPTxPowerMax1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaSFPTxPowerMax1dIndex } ::= { pmTcaSFPTxPowerMax1dTable 1 } PMTcaSFPTxPowerMax1dEntry ::= SEQUENCE { pmTcaSFPTxPowerMax1dIndex Integer32, pmTcaSFPTxPowerMax1dId OCTET STRING, pmTcaSFPTxPowerMax1dUnitType INTEGER, pmTcaSFPTxPowerMax1dCnt Counter64, pmTcaSFPTxPowerMax1dThreshold Counter64, pmTcaSFPTxPowerMax1dOccurTime DateAndTime } pmTcaSFPTxPowerMax1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaSFPTxPowerMax1dEntry 1 } pmTcaSFPTxPowerMax1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaSFPTxPowerMax1dEntry 2 } pmTcaSFPTxPowerMax1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaSFPTxPowerMax1dEntry 3 } pmTcaSFPTxPowerMax1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of unit temperature." ::= { pmTcaSFPTxPowerMax1dEntry 4 } pmTcaSFPTxPowerMax1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of unit temperature." ::= { pmTcaSFPTxPowerMax1dEntry 5 } pmTcaSFPTxPowerMax1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaSFPTxPowerMax1dEntry 6 } pmIfStatistics OBJECT IDENTIFIER ::= { pm 102 } pmIfStatCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 1 } pmIfStatCurr15mEntry OBJECT-TYPE SYNTAX PMIfStatCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatCurr15mIndex } ::= { pmIfStatCurr15mTable 1 } PMIfStatCurr15mEntry ::= SEQUENCE { pmIfStatCurr15mIndex Integer32, pmIfStatCurr15mId OCTET STRING, pmIfStatCurr15mUnitType INTEGER, pmIfStatCurr15mDropped Counter64, pmIfStatCurr15mInputPkts Counter64, pmIfStatCurr15mInputbytes Counter64, pmIfStatCurr15mInputBrdCst Counter64, pmIfStatCurr15mInputMltCst Counter64, pmIfStatCurr15mCrcErrors Counter64, pmIfStatCurr15mCollision Counter64, pmIfStatCurr15mUndersized Counter64, pmIfStatCurr15mOversized Counter64, pmIfStatCurr15mFragments Counter64, pmIfStatCurr15mJabbers Counter64, pmIfStatCurr15mPkt64 Counter64, pmIfStatCurr15mPkt65To127 Counter64, pmIfStatCurr15mPkt128To255 Counter64, pmIfStatCurr15mPkt256To511 Counter64, pmIfStatCurr15mPkt512To1023 Counter64, pmIfStatCurr15mPkt1024 Counter64, pmIfStatCurr15mOutputPkts Counter64, pmIfStatCurr15mOutputBytes Counter64, pmIfStatCurr15mStartTime DateAndTime, pmIfStatCurr15mStopTime DateAndTime } pmIfStatCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatCurr15mEntry 1 } pmIfStatCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatCurr15mEntry 2 } pmIfStatCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatCurr15mEntry 3 } pmIfStatCurr15mDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of dropped events." ::= { pmIfStatCurr15mEntry 4 } pmIfStatCurr15mInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of input packets." ::= { pmIfStatCurr15mEntry 5 } pmIfStatCurr15mInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of input bytes." ::= { pmIfStatCurr15mEntry 6 } pmIfStatCurr15mCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with CRC error." ::= { pmIfStatCurr15mEntry 7 } pmIfStatCurr15mInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of broadcast packets." ::= { pmIfStatCurr15mEntry 8 } pmIfStatCurr15mInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of multicast packets." ::= { pmIfStatCurr15mEntry 9 } pmIfStatCurr15mCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of collisions." ::= { pmIfStatCurr15mEntry 10 } pmIfStatCurr15mUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of undersized packets." ::= { pmIfStatCurr15mEntry 11 } pmIfStatCurr15mOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of oversized packets." ::= { pmIfStatCurr15mEntry 12 } pmIfStatCurr15mFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of frament packets." ::= { pmIfStatCurr15mEntry 13 } pmIfStatCurr15mJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of jabber packets." ::= { pmIfStatCurr15mEntry 14 } pmIfStatCurr15mPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size under 64." ::= { pmIfStatCurr15mEntry 15 } pmIfStatCurr15mPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size between 65 to 127." ::= { pmIfStatCurr15mEntry 16 } pmIfStatCurr15mPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size between 128 to 255." ::= { pmIfStatCurr15mEntry 17 } pmIfStatCurr15mPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size between 256 to 511." ::= { pmIfStatCurr15mEntry 18 } pmIfStatCurr15mPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size between 512 to 1023." ::= { pmIfStatCurr15mEntry 19 } pmIfStatCurr15mPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of packets with size over 1024." ::= { pmIfStatCurr15mEntry 20 } pmIfStatCurr15mOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of interface output packets." ::= { pmIfStatCurr15mEntry 21 } pmIfStatCurr15mOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of interface output bytes." ::= { pmIfStatCurr15mEntry 22 } pmIfStatCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmIfStatCurr15mEntry 100 } pmIfStatCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmIfStatCurr15mEntry 101 } pmIfStatPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 2 } pmIfStatPrev15mEntry OBJECT-TYPE SYNTAX PMIfStatPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatPrev15mIndex } ::= { pmIfStatPrev15mTable 1 } PMIfStatPrev15mEntry ::= SEQUENCE { pmIfStatPrev15mIndex Integer32, pmIfStatPrev15mId OCTET STRING, pmIfStatPrev15mUnitType INTEGER, pmIfStatPrev15mDropped Counter64, pmIfStatPrev15mInputPkts Counter64, pmIfStatPrev15mInputbytes Counter64, pmIfStatPrev15mInputBrdCst Counter64, pmIfStatPrev15mInputMltCst Counter64, pmIfStatPrev15mCrcErrors Counter64, pmIfStatPrev15mCollision Counter64, pmIfStatPrev15mUndersized Counter64, pmIfStatPrev15mOversized Counter64, pmIfStatPrev15mFragments Counter64, pmIfStatPrev15mJabbers Counter64, pmIfStatPrev15mPkt64 Counter64, pmIfStatPrev15mPkt65To127 Counter64, pmIfStatPrev15mPkt128To255 Counter64, pmIfStatPrev15mPkt256To511 Counter64, pmIfStatPrev15mPkt512To1023 Counter64, pmIfStatPrev15mPkt1024 Counter64, pmIfStatPrev15mOutputPkts Counter64, pmIfStatPrev15mOutputBytes Counter64, pmIfStatPrev15mStartTime DateAndTime, pmIfStatPrev15mStopTime DateAndTime } pmIfStatPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatPrev15mEntry 1 } pmIfStatPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatPrev15mEntry 2 } pmIfStatPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatPrev15mEntry 3 } pmIfStatPrev15mDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of dropped events." ::= { pmIfStatPrev15mEntry 4 } pmIfStatPrev15mInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of input packets." ::= { pmIfStatPrev15mEntry 5 } pmIfStatPrev15mInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of input bytes." ::= { pmIfStatPrev15mEntry 6 } pmIfStatPrev15mCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with CRC error." ::= { pmIfStatPrev15mEntry 7 } pmIfStatPrev15mInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of broadcast packets." ::= { pmIfStatPrev15mEntry 8 } pmIfStatPrev15mInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of multicast packets." ::= { pmIfStatPrev15mEntry 9 } pmIfStatPrev15mCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of collisions." ::= { pmIfStatPrev15mEntry 10 } pmIfStatPrev15mUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of undersized packets." ::= { pmIfStatPrev15mEntry 11 } pmIfStatPrev15mOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of oversized packets." ::= { pmIfStatPrev15mEntry 12 } pmIfStatPrev15mFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of frament packets." ::= { pmIfStatPrev15mEntry 13 } pmIfStatPrev15mJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of jabber packets." ::= { pmIfStatPrev15mEntry 14 } pmIfStatPrev15mPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size under 64." ::= { pmIfStatPrev15mEntry 15 } pmIfStatPrev15mPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size between 65 to 127." ::= { pmIfStatPrev15mEntry 16 } pmIfStatPrev15mPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size between 128 to 255." ::= { pmIfStatPrev15mEntry 17 } pmIfStatPrev15mPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size between 256 to 511." ::= { pmIfStatPrev15mEntry 18 } pmIfStatPrev15mPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size between 512 to 1023." ::= { pmIfStatPrev15mEntry 19 } pmIfStatPrev15mPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of packets with size over 1024." ::= { pmIfStatPrev15mEntry 20 } pmIfStatPrev15mOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of interface output packets." ::= { pmIfStatPrev15mEntry 21 } pmIfStatPrev15mOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of interface output bytes." ::= { pmIfStatPrev15mEntry 22 } pmIfStatPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmIfStatPrev15mEntry 100 } pmIfStatPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmIfStatPrev15mEntry 101 } pmIfStatCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 3 } pmIfStatCurr1hEntry OBJECT-TYPE SYNTAX PMIfStatCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatCurr1hIndex } ::= { pmIfStatCurr1hTable 1 } PMIfStatCurr1hEntry ::= SEQUENCE { pmIfStatCurr1hIndex Integer32, pmIfStatCurr1hId OCTET STRING, pmIfStatCurr1hUnitType INTEGER, pmIfStatCurr1hDropped Counter64, pmIfStatCurr1hInputPkts Counter64, pmIfStatCurr1hInputbytes Counter64, pmIfStatCurr1hInputBrdCst Counter64, pmIfStatCurr1hInputMltCst Counter64, pmIfStatCurr1hCrcErrors Counter64, pmIfStatCurr1hCollision Counter64, pmIfStatCurr1hUndersized Counter64, pmIfStatCurr1hOversized Counter64, pmIfStatCurr1hFragments Counter64, pmIfStatCurr1hJabbers Counter64, pmIfStatCurr1hPkt64 Counter64, pmIfStatCurr1hPkt65To127 Counter64, pmIfStatCurr1hPkt128To255 Counter64, pmIfStatCurr1hPkt256To511 Counter64, pmIfStatCurr1hPkt512To1023 Counter64, pmIfStatCurr1hPkt1024 Counter64, pmIfStatCurr1hOutputPkts Counter64, pmIfStatCurr1hOutputBytes Counter64, pmIfStatCurr1hStartTime DateAndTime, pmIfStatCurr1hStopTime DateAndTime } pmIfStatCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatCurr1hEntry 1 } pmIfStatCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatCurr1hEntry 2 } pmIfStatCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatCurr1hEntry 3 } pmIfStatCurr1hDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of dropped events." ::= { pmIfStatCurr1hEntry 4 } pmIfStatCurr1hInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of input packets." ::= { pmIfStatCurr1hEntry 5 } pmIfStatCurr1hInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of input bytes." ::= { pmIfStatCurr1hEntry 6 } pmIfStatCurr1hCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with CRC error." ::= { pmIfStatCurr1hEntry 7 } pmIfStatCurr1hInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of broadcast packets." ::= { pmIfStatCurr1hEntry 8 } pmIfStatCurr1hInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of multicast packets." ::= { pmIfStatCurr1hEntry 9 } pmIfStatCurr1hCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of collisions." ::= { pmIfStatCurr1hEntry 10 } pmIfStatCurr1hUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of undersized packets." ::= { pmIfStatCurr1hEntry 11 } pmIfStatCurr1hOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of oversized packets." ::= { pmIfStatCurr1hEntry 12 } pmIfStatCurr1hFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of frament packets." ::= { pmIfStatCurr1hEntry 13 } pmIfStatCurr1hJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of jabber packets." ::= { pmIfStatCurr1hEntry 14 } pmIfStatCurr1hPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size under 64." ::= { pmIfStatCurr1hEntry 15 } pmIfStatCurr1hPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size between 65 to 127." ::= { pmIfStatCurr1hEntry 16 } pmIfStatCurr1hPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size between 128 to 255." ::= { pmIfStatCurr1hEntry 17 } pmIfStatCurr1hPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size between 256 to 511." ::= { pmIfStatCurr1hEntry 18 } pmIfStatCurr1hPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size between 512 to 1023." ::= { pmIfStatCurr1hEntry 19 } pmIfStatCurr1hPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of packets with size over 1024." ::= { pmIfStatCurr1hEntry 20 } pmIfStatCurr1hOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of interface output packets." ::= { pmIfStatCurr1hEntry 21 } pmIfStatCurr1hOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of interface output bytes." ::= { pmIfStatCurr1hEntry 22 } pmIfStatCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmIfStatCurr1hEntry 100 } pmIfStatCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmIfStatCurr1hEntry 101 } pmIfStatPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 4 } pmIfStatPrev1hEntry OBJECT-TYPE SYNTAX PMIfStatPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatPrev1hIndex } ::= { pmIfStatPrev1hTable 1 } PMIfStatPrev1hEntry ::= SEQUENCE { pmIfStatPrev1hIndex Integer32, pmIfStatPrev1hId OCTET STRING, pmIfStatPrev1hUnitType INTEGER, pmIfStatPrev1hDropped Counter64, pmIfStatPrev1hInputPkts Counter64, pmIfStatPrev1hInputbytes Counter64, pmIfStatPrev1hInputBrdCst Counter64, pmIfStatPrev1hInputMltCst Counter64, pmIfStatPrev1hCrcErrors Counter64, pmIfStatPrev1hCollision Counter64, pmIfStatPrev1hUndersized Counter64, pmIfStatPrev1hOversized Counter64, pmIfStatPrev1hFragments Counter64, pmIfStatPrev1hJabbers Counter64, pmIfStatPrev1hPkt64 Counter64, pmIfStatPrev1hPkt65To127 Counter64, pmIfStatPrev1hPkt128To255 Counter64, pmIfStatPrev1hPkt256To511 Counter64, pmIfStatPrev1hPkt512To1023 Counter64, pmIfStatPrev1hPkt1024 Counter64, pmIfStatPrev1hOutputPkts Counter64, pmIfStatPrev1hOutputBytes Counter64, pmIfStatPrev1hStartTime DateAndTime, pmIfStatPrev1hStopTime DateAndTime } pmIfStatPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatPrev1hEntry 1 } pmIfStatPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatPrev1hEntry 2 } pmIfStatPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatPrev1hEntry 3 } pmIfStatPrev1hDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of dropped events." ::= { pmIfStatPrev1hEntry 4 } pmIfStatPrev1hInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of input packets." ::= { pmIfStatPrev1hEntry 5 } pmIfStatPrev1hInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of input bytes." ::= { pmIfStatPrev1hEntry 6 } pmIfStatPrev1hCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with CRC error." ::= { pmIfStatPrev1hEntry 7 } pmIfStatPrev1hInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of broadcast packets." ::= { pmIfStatPrev1hEntry 8 } pmIfStatPrev1hInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of multicast packets." ::= { pmIfStatPrev1hEntry 9 } pmIfStatPrev1hCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of collisions." ::= { pmIfStatPrev1hEntry 10 } pmIfStatPrev1hUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of undersized packets." ::= { pmIfStatPrev1hEntry 11 } pmIfStatPrev1hOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of oversized packets." ::= { pmIfStatPrev1hEntry 12 } pmIfStatPrev1hFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of frament packets." ::= { pmIfStatPrev1hEntry 13 } pmIfStatPrev1hJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of jabber packets." ::= { pmIfStatPrev1hEntry 14 } pmIfStatPrev1hPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size under 64." ::= { pmIfStatPrev1hEntry 15 } pmIfStatPrev1hPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size between 65 to 127." ::= { pmIfStatPrev1hEntry 16 } pmIfStatPrev1hPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size between 128 to 255." ::= { pmIfStatPrev1hEntry 17 } pmIfStatPrev1hPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size between 256 to 511." ::= { pmIfStatPrev1hEntry 18 } pmIfStatPrev1hPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size between 512 to 1023." ::= { pmIfStatPrev1hEntry 19 } pmIfStatPrev1hPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of packets with size over 1024." ::= { pmIfStatPrev1hEntry 20 } pmIfStatPrev1hOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of interface output packets." ::= { pmIfStatPrev1hEntry 21 } pmIfStatPrev1hOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of interface output bytes." ::= { pmIfStatPrev1hEntry 22 } pmIfStatPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmIfStatPrev1hEntry 100 } pmIfStatPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmIfStatPrev1hEntry 101 } pmIfStatCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 5 } pmIfStatCurr1dEntry OBJECT-TYPE SYNTAX PMIfStatCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatCurr1dIndex } ::= { pmIfStatCurr1dTable 1 } PMIfStatCurr1dEntry ::= SEQUENCE { pmIfStatCurr1dIndex Integer32, pmIfStatCurr1dId OCTET STRING, pmIfStatCurr1dUnitType INTEGER, pmIfStatCurr1dDropped Counter64, pmIfStatCurr1dInputPkts Counter64, pmIfStatCurr1dInputbytes Counter64, pmIfStatCurr1dInputBrdCst Counter64, pmIfStatCurr1dInputMltCst Counter64, pmIfStatCurr1dCrcErrors Counter64, pmIfStatCurr1dCollision Counter64, pmIfStatCurr1dUndersized Counter64, pmIfStatCurr1dOversized Counter64, pmIfStatCurr1dFragments Counter64, pmIfStatCurr1dJabbers Counter64, pmIfStatCurr1dPkt64 Counter64, pmIfStatCurr1dPkt65To127 Counter64, pmIfStatCurr1dPkt128To255 Counter64, pmIfStatCurr1dPkt256To511 Counter64, pmIfStatCurr1dPkt512To1023 Counter64, pmIfStatCurr1dPkt1024 Counter64, pmIfStatCurr1dOutputPkts Counter64, pmIfStatCurr1dOutputBytes Counter64, pmIfStatCurr1dStartTime DateAndTime, pmIfStatCurr1dStopTime DateAndTime } pmIfStatCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatCurr1dEntry 1 } pmIfStatCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatCurr1dEntry 2 } pmIfStatCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatCurr1dEntry 3 } pmIfStatCurr1dDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of dropped events." ::= { pmIfStatCurr1dEntry 4 } pmIfStatCurr1dInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of input packets." ::= { pmIfStatCurr1dEntry 5 } pmIfStatCurr1dInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of input bytes." ::= { pmIfStatCurr1dEntry 6 } pmIfStatCurr1dCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with CRC error." ::= { pmIfStatCurr1dEntry 7 } pmIfStatCurr1dInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of broadcast packets." ::= { pmIfStatCurr1dEntry 8 } pmIfStatCurr1dInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of multicast packets." ::= { pmIfStatCurr1dEntry 9 } pmIfStatCurr1dCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of collisions." ::= { pmIfStatCurr1dEntry 10 } pmIfStatCurr1dUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of undersized packets." ::= { pmIfStatCurr1dEntry 11 } pmIfStatCurr1dOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of oversized packets." ::= { pmIfStatCurr1dEntry 12 } pmIfStatCurr1dFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of frament packets." ::= { pmIfStatCurr1dEntry 13 } pmIfStatCurr1dJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of jabber packets." ::= { pmIfStatCurr1dEntry 14 } pmIfStatCurr1dPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size under 64." ::= { pmIfStatCurr1dEntry 15 } pmIfStatCurr1dPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size between 65 to 127." ::= { pmIfStatCurr1dEntry 16 } pmIfStatCurr1dPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size between 128 to 255." ::= { pmIfStatCurr1dEntry 17 } pmIfStatCurr1dPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size between 256 to 511." ::= { pmIfStatCurr1dEntry 18 } pmIfStatCurr1dPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size between 512 to 1023." ::= { pmIfStatCurr1dEntry 19 } pmIfStatCurr1dPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of packets with size over 1024." ::= { pmIfStatCurr1dEntry 20 } pmIfStatCurr1dOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of interface output packets." ::= { pmIfStatCurr1dEntry 21 } pmIfStatCurr1dOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of interface output bytes." ::= { pmIfStatCurr1dEntry 22 } pmIfStatCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmIfStatCurr1dEntry 100 } pmIfStatCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmIfStatCurr1dEntry 101 } pmIfStatPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMIfStatPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface statistics information of all units." ::= { pmIfStatistics 6 } pmIfStatPrev1dEntry OBJECT-TYPE SYNTAX PMIfStatPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface statistics information of all units." INDEX { pmIfStatPrev1dIndex } ::= { pmIfStatPrev1dTable 1 } PMIfStatPrev1dEntry ::= SEQUENCE { pmIfStatPrev1dIndex Integer32, pmIfStatPrev1dId OCTET STRING, pmIfStatPrev1dUnitType INTEGER, pmIfStatPrev1dDropped Counter64, pmIfStatPrev1dInputPkts Counter64, pmIfStatPrev1dInputbytes Counter64, pmIfStatPrev1dInputBrdCst Counter64, pmIfStatPrev1dInputMltCst Counter64, pmIfStatPrev1dCrcErrors Counter64, pmIfStatPrev1dCollision Counter64, pmIfStatPrev1dUndersized Counter64, pmIfStatPrev1dOversized Counter64, pmIfStatPrev1dFragments Counter64, pmIfStatPrev1dJabbers Counter64, pmIfStatPrev1dPkt64 Counter64, pmIfStatPrev1dPkt65To127 Counter64, pmIfStatPrev1dPkt128To255 Counter64, pmIfStatPrev1dPkt256To511 Counter64, pmIfStatPrev1dPkt512To1023 Counter64, pmIfStatPrev1dPkt1024 Counter64, pmIfStatPrev1dOutputPkts Counter64, pmIfStatPrev1dOutputBytes Counter64, pmIfStatPrev1dStartTime DateAndTime, pmIfStatPrev1dStopTime DateAndTime } pmIfStatPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmIfStatPrev1dEntry 1 } pmIfStatPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmIfStatPrev1dEntry 2 } pmIfStatPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmIfStatPrev1dEntry 3 } pmIfStatPrev1dDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of dropped events." ::= { pmIfStatPrev1dEntry 4 } pmIfStatPrev1dInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of input packets." ::= { pmIfStatPrev1dEntry 5 } pmIfStatPrev1dInputbytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of input bytes." ::= { pmIfStatPrev1dEntry 6 } pmIfStatPrev1dCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with CRC error." ::= { pmIfStatPrev1dEntry 7 } pmIfStatPrev1dInputBrdCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of broadcast packets." ::= { pmIfStatPrev1dEntry 8 } pmIfStatPrev1dInputMltCst OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of multicast packets." ::= { pmIfStatPrev1dEntry 9 } pmIfStatPrev1dCollision OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of collisions." ::= { pmIfStatPrev1dEntry 10 } pmIfStatPrev1dUndersized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of undersized packets." ::= { pmIfStatPrev1dEntry 11 } pmIfStatPrev1dOversized OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of oversized packets." ::= { pmIfStatPrev1dEntry 12 } pmIfStatPrev1dFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of frament packets." ::= { pmIfStatPrev1dEntry 13 } pmIfStatPrev1dJabbers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of jabber packets." ::= { pmIfStatPrev1dEntry 14 } pmIfStatPrev1dPkt64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size under 64." ::= { pmIfStatPrev1dEntry 15 } pmIfStatPrev1dPkt65To127 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size between 65 to 127." ::= { pmIfStatPrev1dEntry 16 } pmIfStatPrev1dPkt128To255 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size between 128 to 255." ::= { pmIfStatPrev1dEntry 17 } pmIfStatPrev1dPkt256To511 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size between 256 to 511." ::= { pmIfStatPrev1dEntry 18 } pmIfStatPrev1dPkt512To1023 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size between 512 to 1023." ::= { pmIfStatPrev1dEntry 19 } pmIfStatPrev1dPkt1024 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of packets with size over 1024." ::= { pmIfStatPrev1dEntry 20 } pmIfStatPrev1dOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of interface output packets." ::= { pmIfStatPrev1dEntry 21 } pmIfStatPrev1dOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of interface output bytes." ::= { pmIfStatPrev1dEntry 22 } pmIfStatPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day start time." ::= { pmIfStatPrev1dEntry 100 } pmIfStatPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day stop time." ::= { pmIfStatPrev1dEntry 101 } pmTcaIfDropped15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfDropped15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 7 } pmTcaIfDropped15mEntry OBJECT-TYPE SYNTAX PMTcaIfDropped15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaIfDropped15mIndex } ::= { pmTcaIfDropped15mTable 1 } PMTcaIfDropped15mEntry ::= SEQUENCE { pmTcaIfDropped15mIndex Integer32, pmTcaIfDropped15mId OCTET STRING, pmTcaIfDropped15mUnitType INTEGER, pmTcaIfDropped15mCnt Counter64, pmTcaIfDropped15mThreshold Counter64, pmTcaIfDropped15mOccurTime DateAndTime } pmTcaIfDropped15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfDropped15mEntry 1 } pmTcaIfDropped15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfDropped15mEntry 2 } pmTcaIfDropped15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfDropped15mEntry 3 } pmTcaIfDropped15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of interface dropped events." ::= { pmTcaIfDropped15mEntry 4 } pmTcaIfDropped15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of interface dropped events." ::= { pmTcaIfDropped15mEntry 5 } pmTcaIfDropped15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfDropped15mEntry 6 } pmTcaIfDropped1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfDropped1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 8 } pmTcaIfDropped1hEntry OBJECT-TYPE SYNTAX PMTcaIfDropped1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaIfDropped1hIndex } ::= { pmTcaIfDropped1hTable 1 } PMTcaIfDropped1hEntry ::= SEQUENCE { pmTcaIfDropped1hIndex Integer32, pmTcaIfDropped1hId OCTET STRING, pmTcaIfDropped1hUnitType INTEGER, pmTcaIfDropped1hCnt Counter64, pmTcaIfDropped1hThreshold Counter64, pmTcaIfDropped1hOccurTime DateAndTime } pmTcaIfDropped1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfDropped1hEntry 1 } pmTcaIfDropped1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfDropped1hEntry 2 } pmTcaIfDropped1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfDropped1hEntry 3 } pmTcaIfDropped1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of interface dropped events." ::= { pmTcaIfDropped1hEntry 4 } pmTcaIfDropped1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of interface dropped events." ::= { pmTcaIfDropped1hEntry 5 } pmTcaIfDropped1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfDropped1hEntry 6 } pmTcaIfDropped1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfDropped1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains temperature information of all units." ::= { pmIfStatistics 9 } pmTcaIfDropped1dEntry OBJECT-TYPE SYNTAX PMTcaIfDropped1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { pmTcaIfDropped1dIndex } ::= { pmTcaIfDropped1dTable 1 } PMTcaIfDropped1dEntry ::= SEQUENCE { pmTcaIfDropped1dIndex Integer32, pmTcaIfDropped1dId OCTET STRING, pmTcaIfDropped1dUnitType INTEGER, pmTcaIfDropped1dCnt Counter64, pmTcaIfDropped1dThreshold Counter64, pmTcaIfDropped1dOccurTime DateAndTime } pmTcaIfDropped1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfDropped1dEntry 1 } pmTcaIfDropped1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfDropped1dEntry 2 } pmTcaIfDropped1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfDropped1dEntry 3 } pmTcaIfDropped1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of interface dropped events." ::= { pmTcaIfDropped1dEntry 4 } pmTcaIfDropped1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of interface dropped events." ::= { pmTcaIfDropped1dEntry 5 } pmTcaIfDropped1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfDropped1dEntry 6 } pmTcaIfInPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 10 } pmTcaIfInPkts15mEntry OBJECT-TYPE SYNTAX PMTcaIfInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInPkts15mIndex } ::= { pmTcaIfInPkts15mTable 1 } PMTcaIfInPkts15mEntry ::= SEQUENCE { pmTcaIfInPkts15mIndex Integer32, pmTcaIfInPkts15mId OCTET STRING, pmTcaIfInPkts15mUnitType INTEGER, pmTcaIfInPkts15mCnt Counter64, pmTcaIfInPkts15mThreshold Counter64, pmTcaIfInPkts15mOccurTime DateAndTime } pmTcaIfInPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInPkts15mEntry 1 } pmTcaIfInPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInPkts15mEntry 2 } pmTcaIfInPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInPkts15mEntry 3 } pmTcaIfInPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of input packets." ::= { pmTcaIfInPkts15mEntry 4 } pmTcaIfInPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of input packets." ::= { pmTcaIfInPkts15mEntry 5 } pmTcaIfInPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInPkts15mEntry 6 } pmTcaIfInPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 11 } pmTcaIfInPkts1hEntry OBJECT-TYPE SYNTAX PMTcaIfInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInPkts1hIndex } ::= { pmTcaIfInPkts1hTable 1 } PMTcaIfInPkts1hEntry ::= SEQUENCE { pmTcaIfInPkts1hIndex Integer32, pmTcaIfInPkts1hId OCTET STRING, pmTcaIfInPkts1hUnitType INTEGER, pmTcaIfInPkts1hCnt Counter64, pmTcaIfInPkts1hThreshold Counter64, pmTcaIfInPkts1hOccurTime DateAndTime } pmTcaIfInPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInPkts1hEntry 1 } pmTcaIfInPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInPkts1hEntry 2 } pmTcaIfInPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInPkts1hEntry 3 } pmTcaIfInPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of input packets." ::= { pmTcaIfInPkts1hEntry 4 } pmTcaIfInPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of input packets." ::= { pmTcaIfInPkts1hEntry 5 } pmTcaIfInPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInPkts1hEntry 6 } pmTcaIfInPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 12 } pmTcaIfInPkts1dEntry OBJECT-TYPE SYNTAX PMTcaIfInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInPkts1dIndex } ::= { pmTcaIfInPkts1dTable 1 } PMTcaIfInPkts1dEntry ::= SEQUENCE { pmTcaIfInPkts1dIndex Integer32, pmTcaIfInPkts1dId OCTET STRING, pmTcaIfInPkts1dUnitType INTEGER, pmTcaIfInPkts1dCnt Counter64, pmTcaIfInPkts1dThreshold Counter64, pmTcaIfInPkts1dOccurTime DateAndTime } pmTcaIfInPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInPkts1dEntry 1 } pmTcaIfInPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInPkts1dEntry 2 } pmTcaIfInPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInPkts1dEntry 3 } pmTcaIfInPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of input packets." ::= { pmTcaIfInPkts1dEntry 4 } pmTcaIfInPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of input packets." ::= { pmTcaIfInPkts1dEntry 5 } pmTcaIfInPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInPkts1dEntry 6 } pmTcaIfInBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 13 } pmTcaIfInBytes15mEntry OBJECT-TYPE SYNTAX PMTcaIfInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBytes15mIndex } ::= { pmTcaIfInBytes15mTable 1 } PMTcaIfInBytes15mEntry ::= SEQUENCE { pmTcaIfInBytes15mIndex Integer32, pmTcaIfInBytes15mId OCTET STRING, pmTcaIfInBytes15mUnitType INTEGER, pmTcaIfInBytes15mCnt Counter64, pmTcaIfInBytes15mThreshold Counter64, pmTcaIfInBytes15mOccurTime DateAndTime } pmTcaIfInBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBytes15mEntry 1 } pmTcaIfInBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBytes15mEntry 2 } pmTcaIfInBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBytes15mEntry 3 } pmTcaIfInBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of input bytes." ::= { pmTcaIfInBytes15mEntry 4 } pmTcaIfInBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of input bytes." ::= { pmTcaIfInBytes15mEntry 5 } pmTcaIfInBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBytes15mEntry 6 } pmTcaIfInBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 14 } pmTcaIfInBytes1hEntry OBJECT-TYPE SYNTAX PMTcaIfInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBytes1hIndex } ::= { pmTcaIfInBytes1hTable 1 } PMTcaIfInBytes1hEntry ::= SEQUENCE { pmTcaIfInBytes1hIndex Integer32, pmTcaIfInBytes1hId OCTET STRING, pmTcaIfInBytes1hUnitType INTEGER, pmTcaIfInBytes1hCnt Counter64, pmTcaIfInBytes1hThreshold Counter64, pmTcaIfInBytes1hOccurTime DateAndTime } pmTcaIfInBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBytes1hEntry 1 } pmTcaIfInBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBytes1hEntry 2 } pmTcaIfInBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBytes1hEntry 3 } pmTcaIfInBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of input bytes." ::= { pmTcaIfInBytes1hEntry 4 } pmTcaIfInBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of input bytes." ::= { pmTcaIfInBytes1hEntry 5 } pmTcaIfInBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBytes1hEntry 6 } pmTcaIfInBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 15 } pmTcaIfInBytes1dEntry OBJECT-TYPE SYNTAX PMTcaIfInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBytes1dIndex } ::= { pmTcaIfInBytes1dTable 1 } PMTcaIfInBytes1dEntry ::= SEQUENCE { pmTcaIfInBytes1dIndex Integer32, pmTcaIfInBytes1dId OCTET STRING, pmTcaIfInBytes1dUnitType INTEGER, pmTcaIfInBytes1dCnt Counter64, pmTcaIfInBytes1dThreshold Counter64, pmTcaIfInBytes1dOccurTime DateAndTime } pmTcaIfInBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBytes1dEntry 1 } pmTcaIfInBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBytes1dEntry 2 } pmTcaIfInBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBytes1dEntry 3 } pmTcaIfInBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of input bytes." ::= { pmTcaIfInBytes1dEntry 4 } pmTcaIfInBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of input bytes." ::= { pmTcaIfInBytes1dEntry 5 } pmTcaIfInBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBytes1dEntry 6 } pmTcaIfInBrdcasts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBrdcasts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 16 } pmTcaIfInBrdcasts15mEntry OBJECT-TYPE SYNTAX PMTcaIfInBrdcasts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBrdcasts15mIndex } ::= { pmTcaIfInBrdcasts15mTable 1 } PMTcaIfInBrdcasts15mEntry ::= SEQUENCE { pmTcaIfInBrdcasts15mIndex Integer32, pmTcaIfInBrdcasts15mId OCTET STRING, pmTcaIfInBrdcasts15mUnitType INTEGER, pmTcaIfInBrdcasts15mCnt Counter64, pmTcaIfInBrdcasts15mThreshold Counter64, pmTcaIfInBrdcasts15mOccurTime DateAndTime } pmTcaIfInBrdcasts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBrdcasts15mEntry 1 } pmTcaIfInBrdcasts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBrdcasts15mEntry 2 } pmTcaIfInBrdcasts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBrdcasts15mEntry 3 } pmTcaIfInBrdcasts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of input broadcast packets." ::= { pmTcaIfInBrdcasts15mEntry 4 } pmTcaIfInBrdcasts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of input broadcast packets." ::= { pmTcaIfInBrdcasts15mEntry 5 } pmTcaIfInBrdcasts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBrdcasts15mEntry 6 } pmTcaIfInBrdcasts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBrdcasts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 17 } pmTcaIfInBrdcasts1hEntry OBJECT-TYPE SYNTAX PMTcaIfInBrdcasts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBrdcasts1hIndex } ::= { pmTcaIfInBrdcasts1hTable 1 } PMTcaIfInBrdcasts1hEntry ::= SEQUENCE { pmTcaIfInBrdcasts1hIndex Integer32, pmTcaIfInBrdcasts1hId OCTET STRING, pmTcaIfInBrdcasts1hUnitType INTEGER, pmTcaIfInBrdcasts1hCnt Counter64, pmTcaIfInBrdcasts1hThreshold Counter64, pmTcaIfInBrdcasts1hOccurTime DateAndTime } pmTcaIfInBrdcasts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBrdcasts1hEntry 1 } pmTcaIfInBrdcasts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBrdcasts1hEntry 2 } pmTcaIfInBrdcasts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBrdcasts1hEntry 3 } pmTcaIfInBrdcasts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of input broadcast packets." ::= { pmTcaIfInBrdcasts1hEntry 4 } pmTcaIfInBrdcasts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of input broadcast packets." ::= { pmTcaIfInBrdcasts1hEntry 5 } pmTcaIfInBrdcasts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBrdcasts1hEntry 6 } pmTcaIfInBrdcasts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInBrdcasts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 18 } pmTcaIfInBrdcasts1dEntry OBJECT-TYPE SYNTAX PMTcaIfInBrdcasts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInBrdcasts1dIndex } ::= { pmTcaIfInBrdcasts1dTable 1 } PMTcaIfInBrdcasts1dEntry ::= SEQUENCE { pmTcaIfInBrdcasts1dIndex Integer32, pmTcaIfInBrdcasts1dId OCTET STRING, pmTcaIfInBrdcasts1dUnitType INTEGER, pmTcaIfInBrdcasts1dCnt Counter64, pmTcaIfInBrdcasts1dThreshold Counter64, pmTcaIfInBrdcasts1dOccurTime DateAndTime } pmTcaIfInBrdcasts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInBrdcasts1dEntry 1 } pmTcaIfInBrdcasts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInBrdcasts1dEntry 2 } pmTcaIfInBrdcasts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInBrdcasts1dEntry 3 } pmTcaIfInBrdcasts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of input broadcast packets." ::= { pmTcaIfInBrdcasts1dEntry 4 } pmTcaIfInBrdcasts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of input broadcast packets." ::= { pmTcaIfInBrdcasts1dEntry 5 } pmTcaIfInBrdcasts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInBrdcasts1dEntry 6 } pmTcaIfInMltcasts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInMltcasts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 19 } pmTcaIfInMltcasts15mEntry OBJECT-TYPE SYNTAX PMTcaIfInMltcasts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInMltcasts15mIndex } ::= { pmTcaIfInMltcasts15mTable 1 } PMTcaIfInMltcasts15mEntry ::= SEQUENCE { pmTcaIfInMltcasts15mIndex Integer32, pmTcaIfInMltcasts15mId OCTET STRING, pmTcaIfInMltcasts15mUnitType INTEGER, pmTcaIfInMltcasts15mCnt Counter64, pmTcaIfInMltcasts15mThreshold Counter64, pmTcaIfInMltcasts15mOccurTime DateAndTime } pmTcaIfInMltcasts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInMltcasts15mEntry 1 } pmTcaIfInMltcasts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInMltcasts15mEntry 2 } pmTcaIfInMltcasts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInMltcasts15mEntry 3 } pmTcaIfInMltcasts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of input multicast packets." ::= { pmTcaIfInMltcasts15mEntry 4 } pmTcaIfInMltcasts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of input multicast packets." ::= { pmTcaIfInMltcasts15mEntry 5 } pmTcaIfInMltcasts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInMltcasts15mEntry 6 } pmTcaIfInMltcasts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInMltcasts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 20 } pmTcaIfInMltcasts1hEntry OBJECT-TYPE SYNTAX PMTcaIfInMltcasts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInMltcasts1hIndex } ::= { pmTcaIfInMltcasts1hTable 1 } PMTcaIfInMltcasts1hEntry ::= SEQUENCE { pmTcaIfInMltcasts1hIndex Integer32, pmTcaIfInMltcasts1hId OCTET STRING, pmTcaIfInMltcasts1hUnitType INTEGER, pmTcaIfInMltcasts1hCnt Counter64, pmTcaIfInMltcasts1hThreshold Counter64, pmTcaIfInMltcasts1hOccurTime DateAndTime } pmTcaIfInMltcasts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInMltcasts1hEntry 1 } pmTcaIfInMltcasts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInMltcasts1hEntry 2 } pmTcaIfInMltcasts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInMltcasts1hEntry 3 } pmTcaIfInMltcasts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of input multicast packets." ::= { pmTcaIfInMltcasts1hEntry 4 } pmTcaIfInMltcasts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of input multicast packets." ::= { pmTcaIfInMltcasts1hEntry 5 } pmTcaIfInMltcasts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInMltcasts1hEntry 6 } pmTcaIfInMltcasts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfInMltcasts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 21 } pmTcaIfInMltcasts1dEntry OBJECT-TYPE SYNTAX PMTcaIfInMltcasts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfInMltcasts1dIndex } ::= { pmTcaIfInMltcasts1dTable 1 } PMTcaIfInMltcasts1dEntry ::= SEQUENCE { pmTcaIfInMltcasts1dIndex Integer32, pmTcaIfInMltcasts1dId OCTET STRING, pmTcaIfInMltcasts1dUnitType INTEGER, pmTcaIfInMltcasts1dCnt Counter64, pmTcaIfInMltcasts1dThreshold Counter64, pmTcaIfInMltcasts1dOccurTime DateAndTime } pmTcaIfInMltcasts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfInMltcasts1dEntry 1 } pmTcaIfInMltcasts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfInMltcasts1dEntry 2 } pmTcaIfInMltcasts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfInMltcasts1dEntry 3 } pmTcaIfInMltcasts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of input multicast packets." ::= { pmTcaIfInMltcasts1dEntry 4 } pmTcaIfInMltcasts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of input multicast packets." ::= { pmTcaIfInMltcasts1dEntry 5 } pmTcaIfInMltcasts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfInMltcasts1dEntry 6 } pmTcaIfCrcErr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCrcErr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 22 } pmTcaIfCrcErr15mEntry OBJECT-TYPE SYNTAX PMTcaIfCrcErr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfCrcErr15mIndex } ::= { pmTcaIfCrcErr15mTable 1 } PMTcaIfCrcErr15mEntry ::= SEQUENCE { pmTcaIfCrcErr15mIndex Integer32, pmTcaIfCrcErr15mId OCTET STRING, pmTcaIfCrcErr15mUnitType INTEGER, pmTcaIfCrcErr15mCnt Counter64, pmTcaIfCrcErr15mThreshold Counter64, pmTcaIfCrcErr15mOccurTime DateAndTime } pmTcaIfCrcErr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCrcErr15mEntry 1 } pmTcaIfCrcErr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCrcErr15mEntry 2 } pmTcaIfCrcErr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCrcErr15mEntry 3 } pmTcaIfCrcErr15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with CRC error." ::= { pmTcaIfCrcErr15mEntry 4 } pmTcaIfCrcErr15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with CRC error." ::= { pmTcaIfCrcErr15mEntry 5 } pmTcaIfCrcErr15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCrcErr15mEntry 6 } pmTcaIfCrcErr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCrcErr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 23 } pmTcaIfCrcErr1hEntry OBJECT-TYPE SYNTAX PMTcaIfCrcErr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfCrcErr1hIndex } ::= { pmTcaIfCrcErr1hTable 1 } PMTcaIfCrcErr1hEntry ::= SEQUENCE { pmTcaIfCrcErr1hIndex Integer32, pmTcaIfCrcErr1hId OCTET STRING, pmTcaIfCrcErr1hUnitType INTEGER, pmTcaIfCrcErr1hCnt Counter64, pmTcaIfCrcErr1hThreshold Counter64, pmTcaIfCrcErr1hOccurTime DateAndTime } pmTcaIfCrcErr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCrcErr1hEntry 1 } pmTcaIfCrcErr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCrcErr1hEntry 2 } pmTcaIfCrcErr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCrcErr1hEntry 3 } pmTcaIfCrcErr1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with CRC error." ::= { pmTcaIfCrcErr1hEntry 4 } pmTcaIfCrcErr1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with CRC error." ::= { pmTcaIfCrcErr1hEntry 5 } pmTcaIfCrcErr1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCrcErr1hEntry 6 } pmTcaIfCrcErr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCrcErr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 24 } pmTcaIfCrcErr1dEntry OBJECT-TYPE SYNTAX PMTcaIfCrcErr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfCrcErr1dIndex } ::= { pmTcaIfCrcErr1dTable 1 } PMTcaIfCrcErr1dEntry ::= SEQUENCE { pmTcaIfCrcErr1dIndex Integer32, pmTcaIfCrcErr1dId OCTET STRING, pmTcaIfCrcErr1dUnitType INTEGER, pmTcaIfCrcErr1dCnt Counter64, pmTcaIfCrcErr1dThreshold Counter64, pmTcaIfCrcErr1dOccurTime DateAndTime } pmTcaIfCrcErr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCrcErr1dEntry 1 } pmTcaIfCrcErr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCrcErr1dEntry 2 } pmTcaIfCrcErr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCrcErr1dEntry 3 } pmTcaIfCrcErr1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with CRC error." ::= { pmTcaIfCrcErr1dEntry 4 } pmTcaIfCrcErr1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with CRC error." ::= { pmTcaIfCrcErr1dEntry 5 } pmTcaIfCrcErr1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCrcErr1dEntry 6 } pmTcaIfCollisions15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCollisions15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 25 } pmTcaIfCollisions15mEntry OBJECT-TYPE SYNTAX PMTcaIfCollisions15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfCollisions15mIndex } ::= { pmTcaIfCollisions15mTable 1 } PMTcaIfCollisions15mEntry ::= SEQUENCE { pmTcaIfCollisions15mIndex Integer32, pmTcaIfCollisions15mId OCTET STRING, pmTcaIfCollisions15mUnitType INTEGER, pmTcaIfCollisions15mCnt Counter64, pmTcaIfCollisions15mThreshold Counter64, pmTcaIfCollisions15mOccurTime DateAndTime } pmTcaIfCollisions15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCollisions15mEntry 1 } pmTcaIfCollisions15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCollisions15mEntry 2 } pmTcaIfCollisions15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCollisions15mEntry 3 } pmTcaIfCollisions15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of collisions." ::= { pmTcaIfCollisions15mEntry 4 } pmTcaIfCollisions15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of collisions." ::= { pmTcaIfCollisions15mEntry 5 } pmTcaIfCollisions15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCollisions15mEntry 6 } pmTcaIfCollisions1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCollisions1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 26 } pmTcaIfCollisions1hEntry OBJECT-TYPE SYNTAX PMTcaIfCollisions1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfCollisions1hIndex } ::= { pmTcaIfCollisions1hTable 1 } PMTcaIfCollisions1hEntry ::= SEQUENCE { pmTcaIfCollisions1hIndex Integer32, pmTcaIfCollisions1hId OCTET STRING, pmTcaIfCollisions1hUnitType INTEGER, pmTcaIfCollisions1hCnt Counter64, pmTcaIfCollisions1hThreshold Counter64, pmTcaIfCollisions1hOccurTime DateAndTime } pmTcaIfCollisions1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCollisions1hEntry 1 } pmTcaIfCollisions1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCollisions1hEntry 2 } pmTcaIfCollisions1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCollisions1hEntry 3 } pmTcaIfCollisions1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of collisions." ::= { pmTcaIfCollisions1hEntry 4 } pmTcaIfCollisions1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of collisions." ::= { pmTcaIfCollisions1hEntry 5 } pmTcaIfCollisions1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCollisions1hEntry 6 } pmTcaIfCollisions1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfCollisions1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 27 } pmTcaIfCollisions1dEntry OBJECT-TYPE SYNTAX PMTcaIfCollisions1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfCollisions1dIndex } ::= { pmTcaIfCollisions1dTable 1 } PMTcaIfCollisions1dEntry ::= SEQUENCE { pmTcaIfCollisions1dIndex Integer32, pmTcaIfCollisions1dId OCTET STRING, pmTcaIfCollisions1dUnitType INTEGER, pmTcaIfCollisions1dCnt Counter64, pmTcaIfCollisions1dThreshold Counter64, pmTcaIfCollisions1dOccurTime DateAndTime } pmTcaIfCollisions1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfCollisions1dEntry 1 } pmTcaIfCollisions1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfCollisions1dEntry 2 } pmTcaIfCollisions1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfCollisions1dEntry 3 } pmTcaIfCollisions1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of collisions." ::= { pmTcaIfCollisions1dEntry 4 } pmTcaIfCollisions1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of collisions." ::= { pmTcaIfCollisions1dEntry 5 } pmTcaIfCollisions1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfCollisions1dEntry 6 } pmTcaIfUndersized15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfUndersized15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 28 } pmTcaIfUndersized15mEntry OBJECT-TYPE SYNTAX PMTcaIfUndersized15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfUndersized15mIndex } ::= { pmTcaIfUndersized15mTable 1 } PMTcaIfUndersized15mEntry ::= SEQUENCE { pmTcaIfUndersized15mIndex Integer32, pmTcaIfUndersized15mId OCTET STRING, pmTcaIfUndersized15mUnitType INTEGER, pmTcaIfUndersized15mCnt Counter64, pmTcaIfUndersized15mThreshold Counter64, pmTcaIfUndersized15mOccurTime DateAndTime } pmTcaIfUndersized15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfUndersized15mEntry 1 } pmTcaIfUndersized15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfUndersized15mEntry 2 } pmTcaIfUndersized15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfUndersized15mEntry 3 } pmTcaIfUndersized15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of undersized packets." ::= { pmTcaIfUndersized15mEntry 4 } pmTcaIfUndersized15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of undersized packets." ::= { pmTcaIfUndersized15mEntry 5 } pmTcaIfUndersized15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfUndersized15mEntry 6 } pmTcaIfUndersized1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfUndersized1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 29 } pmTcaIfUndersized1hEntry OBJECT-TYPE SYNTAX PMTcaIfUndersized1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfUndersized1hIndex } ::= { pmTcaIfUndersized1hTable 1 } PMTcaIfUndersized1hEntry ::= SEQUENCE { pmTcaIfUndersized1hIndex Integer32, pmTcaIfUndersized1hId OCTET STRING, pmTcaIfUndersized1hUnitType INTEGER, pmTcaIfUndersized1hCnt Counter64, pmTcaIfUndersized1hThreshold Counter64, pmTcaIfUndersized1hOccurTime DateAndTime } pmTcaIfUndersized1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfUndersized1hEntry 1 } pmTcaIfUndersized1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfUndersized1hEntry 2 } pmTcaIfUndersized1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfUndersized1hEntry 3 } pmTcaIfUndersized1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of undersized packets." ::= { pmTcaIfUndersized1hEntry 4 } pmTcaIfUndersized1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of undersized packets." ::= { pmTcaIfUndersized1hEntry 5 } pmTcaIfUndersized1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfUndersized1hEntry 6 } pmTcaIfUndersized1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfUndersized1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 30 } pmTcaIfUndersized1dEntry OBJECT-TYPE SYNTAX PMTcaIfUndersized1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfUndersized1dIndex } ::= { pmTcaIfUndersized1dTable 1 } PMTcaIfUndersized1dEntry ::= SEQUENCE { pmTcaIfUndersized1dIndex Integer32, pmTcaIfUndersized1dId OCTET STRING, pmTcaIfUndersized1dUnitType INTEGER, pmTcaIfUndersized1dCnt Counter64, pmTcaIfUndersized1dThreshold Counter64, pmTcaIfUndersized1dOccurTime DateAndTime } pmTcaIfUndersized1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfUndersized1dEntry 1 } pmTcaIfUndersized1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfUndersized1dEntry 2 } pmTcaIfUndersized1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfUndersized1dEntry 3 } pmTcaIfUndersized1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of undersized packets." ::= { pmTcaIfUndersized1dEntry 4 } pmTcaIfUndersized1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of undersized packets." ::= { pmTcaIfUndersized1dEntry 5 } pmTcaIfUndersized1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfUndersized1dEntry 6 } pmTcaIfOversized15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOversized15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 31 } pmTcaIfOversized15mEntry OBJECT-TYPE SYNTAX PMTcaIfOversized15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfOversized15mIndex } ::= { pmTcaIfOversized15mTable 1 } PMTcaIfOversized15mEntry ::= SEQUENCE { pmTcaIfOversized15mIndex Integer32, pmTcaIfOversized15mId OCTET STRING, pmTcaIfOversized15mUnitType INTEGER, pmTcaIfOversized15mCnt Counter64, pmTcaIfOversized15mThreshold Counter64, pmTcaIfOversized15mOccurTime DateAndTime } pmTcaIfOversized15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOversized15mEntry 1 } pmTcaIfOversized15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOversized15mEntry 2 } pmTcaIfOversized15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOversized15mEntry 3 } pmTcaIfOversized15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of oversized packets." ::= { pmTcaIfOversized15mEntry 4 } pmTcaIfOversized15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of oversized packets." ::= { pmTcaIfOversized15mEntry 5 } pmTcaIfOversized15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOversized15mEntry 6 } pmTcaIfOversized1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOversized1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 32 } pmTcaIfOversized1hEntry OBJECT-TYPE SYNTAX PMTcaIfOversized1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature interface of all units." INDEX { pmTcaIfOversized1hIndex } ::= { pmTcaIfOversized1hTable 1 } PMTcaIfOversized1hEntry ::= SEQUENCE { pmTcaIfOversized1hIndex Integer32, pmTcaIfOversized1hId OCTET STRING, pmTcaIfOversized1hUnitType INTEGER, pmTcaIfOversized1hCnt Counter64, pmTcaIfOversized1hThreshold Counter64, pmTcaIfOversized1hOccurTime DateAndTime } pmTcaIfOversized1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOversized1hEntry 1 } pmTcaIfOversized1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOversized1hEntry 2 } pmTcaIfOversized1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOversized1hEntry 3 } pmTcaIfOversized1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of oversized packets." ::= { pmTcaIfOversized1hEntry 4 } pmTcaIfOversized1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of oversized packets." ::= { pmTcaIfOversized1hEntry 5 } pmTcaIfOversized1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOversized1hEntry 6 } pmTcaIfOversized1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOversized1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 33 } pmTcaIfOversized1dEntry OBJECT-TYPE SYNTAX PMTcaIfOversized1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOversized1dIndex } ::= { pmTcaIfOversized1dTable 1 } PMTcaIfOversized1dEntry ::= SEQUENCE { pmTcaIfOversized1dIndex Integer32, pmTcaIfOversized1dId OCTET STRING, pmTcaIfOversized1dUnitType INTEGER, pmTcaIfOversized1dCnt Counter64, pmTcaIfOversized1dThreshold Counter64, pmTcaIfOversized1dOccurTime DateAndTime } pmTcaIfOversized1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOversized1dEntry 1 } pmTcaIfOversized1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOversized1dEntry 2 } pmTcaIfOversized1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOversized1dEntry 3 } pmTcaIfOversized1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of oversized packets." ::= { pmTcaIfOversized1dEntry 4 } pmTcaIfOversized1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of oversized packets." ::= { pmTcaIfOversized1dEntry 5 } pmTcaIfOversized1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOversized1dEntry 6 } pmTcaIfFragments15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfFragments15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 34 } pmTcaIfFragments15mEntry OBJECT-TYPE SYNTAX PMTcaIfFragments15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfFragments15mIndex } ::= { pmTcaIfFragments15mTable 1 } PMTcaIfFragments15mEntry ::= SEQUENCE { pmTcaIfFragments15mIndex Integer32, pmTcaIfFragments15mId OCTET STRING, pmTcaIfFragments15mUnitType INTEGER, pmTcaIfFragments15mCnt Counter64, pmTcaIfFragments15mThreshold Counter64, pmTcaIfFragments15mOccurTime DateAndTime } pmTcaIfFragments15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfFragments15mEntry 1 } pmTcaIfFragments15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfFragments15mEntry 2 } pmTcaIfFragments15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfFragments15mEntry 3 } pmTcaIfFragments15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of fragment packets." ::= { pmTcaIfFragments15mEntry 4 } pmTcaIfFragments15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of fragment packets." ::= { pmTcaIfFragments15mEntry 5 } pmTcaIfFragments15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfFragments15mEntry 6 } pmTcaIfFragments1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfFragments1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 35 } pmTcaIfFragments1hEntry OBJECT-TYPE SYNTAX PMTcaIfFragments1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfFragments1hIndex } ::= { pmTcaIfFragments1hTable 1 } PMTcaIfFragments1hEntry ::= SEQUENCE { pmTcaIfFragments1hIndex Integer32, pmTcaIfFragments1hId OCTET STRING, pmTcaIfFragments1hUnitType INTEGER, pmTcaIfFragments1hCnt Counter64, pmTcaIfFragments1hThreshold Counter64, pmTcaIfFragments1hOccurTime DateAndTime } pmTcaIfFragments1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfFragments1hEntry 1 } pmTcaIfFragments1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfFragments1hEntry 2 } pmTcaIfFragments1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfFragments1hEntry 3 } pmTcaIfFragments1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of fragment packets." ::= { pmTcaIfFragments1hEntry 4 } pmTcaIfFragments1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of fragment packets." ::= { pmTcaIfFragments1hEntry 5 } pmTcaIfFragments1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfFragments1hEntry 6 } pmTcaIfFragments1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfFragments1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 36 } pmTcaIfFragments1dEntry OBJECT-TYPE SYNTAX PMTcaIfFragments1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfFragments1dIndex } ::= { pmTcaIfFragments1dTable 1 } PMTcaIfFragments1dEntry ::= SEQUENCE { pmTcaIfFragments1dIndex Integer32, pmTcaIfFragments1dId OCTET STRING, pmTcaIfFragments1dUnitType INTEGER, pmTcaIfFragments1dCnt Counter64, pmTcaIfFragments1dThreshold Counter64, pmTcaIfFragments1dOccurTime DateAndTime } pmTcaIfFragments1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfFragments1dEntry 1 } pmTcaIfFragments1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfFragments1dEntry 2 } pmTcaIfFragments1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfFragments1dEntry 3 } pmTcaIfFragments1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of fragment packets." ::= { pmTcaIfFragments1dEntry 4 } pmTcaIfFragments1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of fragment packets." ::= { pmTcaIfFragments1dEntry 5 } pmTcaIfFragments1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfFragments1dEntry 6 } pmTcaIfJabbers15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfJabbers15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 37 } pmTcaIfJabbers15mEntry OBJECT-TYPE SYNTAX PMTcaIfJabbers15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfJabbers15mIndex } ::= { pmTcaIfJabbers15mTable 1 } PMTcaIfJabbers15mEntry ::= SEQUENCE { pmTcaIfJabbers15mIndex Integer32, pmTcaIfJabbers15mId OCTET STRING, pmTcaIfJabbers15mUnitType INTEGER, pmTcaIfJabbers15mCnt Counter64, pmTcaIfJabbers15mThreshold Counter64, pmTcaIfJabbers15mOccurTime DateAndTime } pmTcaIfJabbers15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfJabbers15mEntry 1 } pmTcaIfJabbers15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfJabbers15mEntry 2 } pmTcaIfJabbers15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfJabbers15mEntry 3 } pmTcaIfJabbers15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of jabber packets." ::= { pmTcaIfJabbers15mEntry 4 } pmTcaIfJabbers15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of jabber packets." ::= { pmTcaIfJabbers15mEntry 5 } pmTcaIfJabbers15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfJabbers15mEntry 6 } pmTcaIfJabbers1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfJabbers1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 38 } pmTcaIfJabbers1hEntry OBJECT-TYPE SYNTAX PMTcaIfJabbers1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfJabbers1hIndex } ::= { pmTcaIfJabbers1hTable 1 } PMTcaIfJabbers1hEntry ::= SEQUENCE { pmTcaIfJabbers1hIndex Integer32, pmTcaIfJabbers1hId OCTET STRING, pmTcaIfJabbers1hUnitType INTEGER, pmTcaIfJabbers1hCnt Counter64, pmTcaIfJabbers1hThreshold Counter64, pmTcaIfJabbers1hOccurTime DateAndTime } pmTcaIfJabbers1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfJabbers1hEntry 1 } pmTcaIfJabbers1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfJabbers1hEntry 2 } pmTcaIfJabbers1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfJabbers1hEntry 3 } pmTcaIfJabbers1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of jabber packets." ::= { pmTcaIfJabbers1hEntry 4 } pmTcaIfJabbers1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of jabber packets." ::= { pmTcaIfJabbers1hEntry 5 } pmTcaIfJabbers1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfJabbers1hEntry 6 } pmTcaIfJabbers1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfJabbers1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 39 } pmTcaIfJabbers1dEntry OBJECT-TYPE SYNTAX PMTcaIfJabbers1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfJabbers1dIndex } ::= { pmTcaIfJabbers1dTable 1 } PMTcaIfJabbers1dEntry ::= SEQUENCE { pmTcaIfJabbers1dIndex Integer32, pmTcaIfJabbers1dId OCTET STRING, pmTcaIfJabbers1dUnitType INTEGER, pmTcaIfJabbers1dCnt Counter64, pmTcaIfJabbers1dThreshold Counter64, pmTcaIfJabbers1dOccurTime DateAndTime } pmTcaIfJabbers1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfJabbers1dEntry 1 } pmTcaIfJabbers1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfJabbers1dEntry 2 } pmTcaIfJabbers1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfJabbers1dEntry 3 } pmTcaIfJabbers1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of jabber packets." ::= { pmTcaIfJabbers1dEntry 4 } pmTcaIfJabbers1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of jabber packets." ::= { pmTcaIfJabbers1dEntry 5 } pmTcaIfJabbers1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfJabbers1dEntry 6 } pmTcaIfPkt6415mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt6415mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 40 } pmTcaIfPkt6415mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt6415mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt6415mIndex } ::= { pmTcaIfPkt6415mTable 1 } PMTcaIfPkt6415mEntry ::= SEQUENCE { pmTcaIfPkt6415mIndex Integer32, pmTcaIfPkt6415mId OCTET STRING, pmTcaIfPkt6415mUnitType INTEGER, pmTcaIfPkt6415mCnt Counter64, pmTcaIfPkt6415mThreshold Counter64, pmTcaIfPkt6415mOccurTime DateAndTime } pmTcaIfPkt6415mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt6415mEntry 1 } pmTcaIfPkt6415mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt6415mEntry 2 } pmTcaIfPkt6415mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt6415mEntry 3 } pmTcaIfPkt6415mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size under 64." ::= { pmTcaIfPkt6415mEntry 4 } pmTcaIfPkt6415mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size under 64." ::= { pmTcaIfPkt6415mEntry 5 } pmTcaIfPkt6415mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt6415mEntry 6 } pmTcaIfPkt641hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt641hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 41 } pmTcaIfPkt641hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt641hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt641hIndex } ::= { pmTcaIfPkt641hTable 1 } PMTcaIfPkt641hEntry ::= SEQUENCE { pmTcaIfPkt641hIndex Integer32, pmTcaIfPkt641hId OCTET STRING, pmTcaIfPkt641hUnitType INTEGER, pmTcaIfPkt641hCnt Counter64, pmTcaIfPkt641hThreshold Counter64, pmTcaIfPkt641hOccurTime DateAndTime } pmTcaIfPkt641hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt641hEntry 1 } pmTcaIfPkt641hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt641hEntry 2 } pmTcaIfPkt641hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt641hEntry 3 } pmTcaIfPkt641hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size under 64." ::= { pmTcaIfPkt641hEntry 4 } pmTcaIfPkt641hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size under 64." ::= { pmTcaIfPkt641hEntry 5 } pmTcaIfPkt641hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt641hEntry 6 } pmTcaIfPkt641dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt641dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 42 } pmTcaIfPkt641dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt641dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt641dIndex } ::= { pmTcaIfPkt641dTable 1 } PMTcaIfPkt641dEntry ::= SEQUENCE { pmTcaIfPkt641dIndex Integer32, pmTcaIfPkt641dId OCTET STRING, pmTcaIfPkt641dUnitType INTEGER, pmTcaIfPkt641dCnt Counter64, pmTcaIfPkt641dThreshold Counter64, pmTcaIfPkt641dOccurTime DateAndTime } pmTcaIfPkt641dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt641dEntry 1 } pmTcaIfPkt641dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt641dEntry 2 } pmTcaIfPkt641dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt641dEntry 3 } pmTcaIfPkt641dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size under 64." ::= { pmTcaIfPkt641dEntry 4 } pmTcaIfPkt641dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size under 64." ::= { pmTcaIfPkt641dEntry 5 } pmTcaIfPkt641dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt641dEntry 6 } pmTcaIfPkt65to12715mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt65to12715mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 43 } pmTcaIfPkt65to12715mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt65to12715mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt65to12715mIndex } ::= { pmTcaIfPkt65to12715mTable 1 } PMTcaIfPkt65to12715mEntry ::= SEQUENCE { pmTcaIfPkt65to12715mIndex Integer32, pmTcaIfPkt65to12715mId OCTET STRING, pmTcaIfPkt65to12715mUnitType INTEGER, pmTcaIfPkt65to12715mCnt Counter64, pmTcaIfPkt65to12715mThreshold Counter64, pmTcaIfPkt65to12715mOccurTime DateAndTime } pmTcaIfPkt65to12715mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt65to12715mEntry 1 } pmTcaIfPkt65to12715mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt65to12715mEntry 2 } pmTcaIfPkt65to12715mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt65to12715mEntry 3 } pmTcaIfPkt65to12715mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size between 65 to 127." ::= { pmTcaIfPkt65to12715mEntry 4 } pmTcaIfPkt65to12715mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size between 65 to 127." ::= { pmTcaIfPkt65to12715mEntry 5 } pmTcaIfPkt65to12715mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt65to12715mEntry 6 } pmTcaIfPkt65to1271hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt65to1271hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 44 } pmTcaIfPkt65to1271hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt65to1271hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt65to1271hIndex } ::= { pmTcaIfPkt65to1271hTable 1 } PMTcaIfPkt65to1271hEntry ::= SEQUENCE { pmTcaIfPkt65to1271hIndex Integer32, pmTcaIfPkt65to1271hId OCTET STRING, pmTcaIfPkt65to1271hUnitType INTEGER, pmTcaIfPkt65to1271hCnt Counter64, pmTcaIfPkt65to1271hThreshold Counter64, pmTcaIfPkt65to1271hOccurTime DateAndTime } pmTcaIfPkt65to1271hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt65to1271hEntry 1 } pmTcaIfPkt65to1271hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt65to1271hEntry 2 } pmTcaIfPkt65to1271hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt65to1271hEntry 3 } pmTcaIfPkt65to1271hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size between 65 to 127." ::= { pmTcaIfPkt65to1271hEntry 4 } pmTcaIfPkt65to1271hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size between 65 to 127." ::= { pmTcaIfPkt65to1271hEntry 5 } pmTcaIfPkt65to1271hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt65to1271hEntry 6 } pmTcaIfPkt65to1271dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt65to1271dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 45 } pmTcaIfPkt65to1271dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt65to1271dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt65to1271dIndex } ::= { pmTcaIfPkt65to1271dTable 1 } PMTcaIfPkt65to1271dEntry ::= SEQUENCE { pmTcaIfPkt65to1271dIndex Integer32, pmTcaIfPkt65to1271dId OCTET STRING, pmTcaIfPkt65to1271dUnitType INTEGER, pmTcaIfPkt65to1271dCnt Counter64, pmTcaIfPkt65to1271dThreshold Counter64, pmTcaIfPkt65to1271dOccurTime DateAndTime } pmTcaIfPkt65to1271dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt65to1271dEntry 1 } pmTcaIfPkt65to1271dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt65to1271dEntry 2 } pmTcaIfPkt65to1271dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt65to1271dEntry 3 } pmTcaIfPkt65to1271dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size between 65 to 127." ::= { pmTcaIfPkt65to1271dEntry 4 } pmTcaIfPkt65to1271dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size between 65 to 127." ::= { pmTcaIfPkt65to1271dEntry 5 } pmTcaIfPkt65to1271dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt65to1271dEntry 6 } pmTcaIfPkt128to25515mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt128to25515mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 46 } pmTcaIfPkt128to25515mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt128to25515mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt128to25515mIndex } ::= { pmTcaIfPkt128to25515mTable 1 } PMTcaIfPkt128to25515mEntry ::= SEQUENCE { pmTcaIfPkt128to25515mIndex Integer32, pmTcaIfPkt128to25515mId OCTET STRING, pmTcaIfPkt128to25515mUnitType INTEGER, pmTcaIfPkt128to25515mCnt Counter64, pmTcaIfPkt128to25515mThreshold Counter64, pmTcaIfPkt128to25515mOccurTime DateAndTime } pmTcaIfPkt128to25515mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt128to25515mEntry 1 } pmTcaIfPkt128to25515mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt128to25515mEntry 2 } pmTcaIfPkt128to25515mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt128to25515mEntry 3 } pmTcaIfPkt128to25515mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size between 128 to 255." ::= { pmTcaIfPkt128to25515mEntry 4 } pmTcaIfPkt128to25515mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size between 128 to 255." ::= { pmTcaIfPkt128to25515mEntry 5 } pmTcaIfPkt128to25515mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt128to25515mEntry 6 } pmTcaIfPkt128to2551hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt128to2551hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 47 } pmTcaIfPkt128to2551hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt128to2551hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt128to2551hIndex } ::= { pmTcaIfPkt128to2551hTable 1 } PMTcaIfPkt128to2551hEntry ::= SEQUENCE { pmTcaIfPkt128to2551hIndex Integer32, pmTcaIfPkt128to2551hId OCTET STRING, pmTcaIfPkt128to2551hUnitType INTEGER, pmTcaIfPkt128to2551hCnt Counter64, pmTcaIfPkt128to2551hThreshold Counter64, pmTcaIfPkt128to2551hOccurTime DateAndTime } pmTcaIfPkt128to2551hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt128to2551hEntry 1 } pmTcaIfPkt128to2551hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt128to2551hEntry 2 } pmTcaIfPkt128to2551hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt128to2551hEntry 3 } pmTcaIfPkt128to2551hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size between 128 to 255." ::= { pmTcaIfPkt128to2551hEntry 4 } pmTcaIfPkt128to2551hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size between 128 to 255." ::= { pmTcaIfPkt128to2551hEntry 5 } pmTcaIfPkt128to2551hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt128to2551hEntry 6 } pmTcaIfPkt128to2551dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt128to2551dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 48 } pmTcaIfPkt128to2551dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt128to2551dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt128to2551dIndex } ::= { pmTcaIfPkt128to2551dTable 1 } PMTcaIfPkt128to2551dEntry ::= SEQUENCE { pmTcaIfPkt128to2551dIndex Integer32, pmTcaIfPkt128to2551dId OCTET STRING, pmTcaIfPkt128to2551dUnitType INTEGER, pmTcaIfPkt128to2551dCnt Counter64, pmTcaIfPkt128to2551dThreshold Counter64, pmTcaIfPkt128to2551dOccurTime DateAndTime } pmTcaIfPkt128to2551dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt128to2551dEntry 1 } pmTcaIfPkt128to2551dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt128to2551dEntry 2 } pmTcaIfPkt128to2551dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt128to2551dEntry 3 } pmTcaIfPkt128to2551dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size between 128 to 255." ::= { pmTcaIfPkt128to2551dEntry 4 } pmTcaIfPkt128to2551dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size between 128 to 255." ::= { pmTcaIfPkt128to2551dEntry 5 } pmTcaIfPkt128to2551dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt128to2551dEntry 6 } pmTcaIfPkt256to51115mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt256to51115mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 49 } pmTcaIfPkt256to51115mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt256to51115mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt256to51115mIndex } ::= { pmTcaIfPkt256to51115mTable 1 } PMTcaIfPkt256to51115mEntry ::= SEQUENCE { pmTcaIfPkt256to51115mIndex Integer32, pmTcaIfPkt256to51115mId OCTET STRING, pmTcaIfPkt256to51115mUnitType INTEGER, pmTcaIfPkt256to51115mCnt Counter64, pmTcaIfPkt256to51115mThreshold Counter64, pmTcaIfPkt256to51115mOccurTime DateAndTime } pmTcaIfPkt256to51115mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt256to51115mEntry 1 } pmTcaIfPkt256to51115mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt256to51115mEntry 2 } pmTcaIfPkt256to51115mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt256to51115mEntry 3 } pmTcaIfPkt256to51115mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size between 256 to 511." ::= { pmTcaIfPkt256to51115mEntry 4 } pmTcaIfPkt256to51115mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size between 256 to 511." ::= { pmTcaIfPkt256to51115mEntry 5 } pmTcaIfPkt256to51115mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt256to51115mEntry 6 } pmTcaIfPkt256to5111hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt256to5111hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 50 } pmTcaIfPkt256to5111hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt256to5111hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt256to5111hIndex } ::= { pmTcaIfPkt256to5111hTable 1 } PMTcaIfPkt256to5111hEntry ::= SEQUENCE { pmTcaIfPkt256to5111hIndex Integer32, pmTcaIfPkt256to5111hId OCTET STRING, pmTcaIfPkt256to5111hUnitType INTEGER, pmTcaIfPkt256to5111hCnt Counter64, pmTcaIfPkt256to5111hThreshold Counter64, pmTcaIfPkt256to5111hOccurTime DateAndTime } pmTcaIfPkt256to5111hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt256to5111hEntry 1 } pmTcaIfPkt256to5111hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt256to5111hEntry 2 } pmTcaIfPkt256to5111hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt256to5111hEntry 3 } pmTcaIfPkt256to5111hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size between 256 to 511." ::= { pmTcaIfPkt256to5111hEntry 4 } pmTcaIfPkt256to5111hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size between 256 to 511." ::= { pmTcaIfPkt256to5111hEntry 5 } pmTcaIfPkt256to5111hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt256to5111hEntry 6 } pmTcaIfPkt256to5111dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt256to5111dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 51 } pmTcaIfPkt256to5111dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt256to5111dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt256to5111dIndex } ::= { pmTcaIfPkt256to5111dTable 1 } PMTcaIfPkt256to5111dEntry ::= SEQUENCE { pmTcaIfPkt256to5111dIndex Integer32, pmTcaIfPkt256to5111dId OCTET STRING, pmTcaIfPkt256to5111dUnitType INTEGER, pmTcaIfPkt256to5111dCnt Counter64, pmTcaIfPkt256to5111dThreshold Counter64, pmTcaIfPkt256to5111dOccurTime DateAndTime } pmTcaIfPkt256to5111dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt256to5111dEntry 1 } pmTcaIfPkt256to5111dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt256to5111dEntry 2 } pmTcaIfPkt256to5111dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt256to5111dEntry 3 } pmTcaIfPkt256to5111dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size between 256 to 511." ::= { pmTcaIfPkt256to5111dEntry 4 } pmTcaIfPkt256to5111dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size between 256 to 511." ::= { pmTcaIfPkt256to5111dEntry 5 } pmTcaIfPkt256to5111dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt256to5111dEntry 6 } pmTcaIfPkt512to102315mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt512to102315mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 52 } pmTcaIfPkt512to102315mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt512to102315mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt512to102315mIndex } ::= { pmTcaIfPkt512to102315mTable 1 } PMTcaIfPkt512to102315mEntry ::= SEQUENCE { pmTcaIfPkt512to102315mIndex Integer32, pmTcaIfPkt512to102315mId OCTET STRING, pmTcaIfPkt512to102315mUnitType INTEGER, pmTcaIfPkt512to102315mCnt Counter64, pmTcaIfPkt512to102315mThreshold Counter64, pmTcaIfPkt512to102315mOccurTime DateAndTime } pmTcaIfPkt512to102315mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt512to102315mEntry 1 } pmTcaIfPkt512to102315mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt512to102315mEntry 2 } pmTcaIfPkt512to102315mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt512to102315mEntry 3 } pmTcaIfPkt512to102315mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to102315mEntry 4 } pmTcaIfPkt512to102315mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to102315mEntry 5 } pmTcaIfPkt512to102315mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt512to102315mEntry 6 } pmTcaIfPkt512to10231hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt512to10231hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 53 } pmTcaIfPkt512to10231hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt512to10231hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt512to10231hIndex } ::= { pmTcaIfPkt512to10231hTable 1 } PMTcaIfPkt512to10231hEntry ::= SEQUENCE { pmTcaIfPkt512to10231hIndex Integer32, pmTcaIfPkt512to10231hId OCTET STRING, pmTcaIfPkt512to10231hUnitType INTEGER, pmTcaIfPkt512to10231hCnt Counter64, pmTcaIfPkt512to10231hThreshold Counter64, pmTcaIfPkt512to10231hOccurTime DateAndTime } pmTcaIfPkt512to10231hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt512to10231hEntry 1 } pmTcaIfPkt512to10231hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt512to10231hEntry 2 } pmTcaIfPkt512to10231hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt512to10231hEntry 3 } pmTcaIfPkt512to10231hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to10231hEntry 4 } pmTcaIfPkt512to10231hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to10231hEntry 5 } pmTcaIfPkt512to10231hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt512to10231hEntry 6 } pmTcaIfPkt512to10231dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt512to10231dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 54 } pmTcaIfPkt512to10231dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt512to10231dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt512to10231dIndex } ::= { pmTcaIfPkt512to10231dTable 1 } PMTcaIfPkt512to10231dEntry ::= SEQUENCE { pmTcaIfPkt512to10231dIndex Integer32, pmTcaIfPkt512to10231dId OCTET STRING, pmTcaIfPkt512to10231dUnitType INTEGER, pmTcaIfPkt512to10231dCnt Counter64, pmTcaIfPkt512to10231dThreshold Counter64, pmTcaIfPkt512to10231dOccurTime DateAndTime } pmTcaIfPkt512to10231dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt512to10231dEntry 1 } pmTcaIfPkt512to10231dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt512to10231dEntry 2 } pmTcaIfPkt512to10231dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt512to10231dEntry 3 } pmTcaIfPkt512to10231dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to10231dEntry 4 } pmTcaIfPkt512to10231dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size between 512 to 1023." ::= { pmTcaIfPkt512to10231dEntry 5 } pmTcaIfPkt512to10231dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt512to10231dEntry 6 } pmTcaIfPkt102415mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt102415mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 55 } pmTcaIfPkt102415mEntry OBJECT-TYPE SYNTAX PMTcaIfPkt102415mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt102415mIndex } ::= { pmTcaIfPkt102415mTable 1 } PMTcaIfPkt102415mEntry ::= SEQUENCE { pmTcaIfPkt102415mIndex Integer32, pmTcaIfPkt102415mId OCTET STRING, pmTcaIfPkt102415mUnitType INTEGER, pmTcaIfPkt102415mCnt Counter64, pmTcaIfPkt102415mThreshold Counter64, pmTcaIfPkt102415mOccurTime DateAndTime } pmTcaIfPkt102415mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt102415mEntry 1 } pmTcaIfPkt102415mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt102415mEntry 2 } pmTcaIfPkt102415mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt102415mEntry 3 } pmTcaIfPkt102415mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of packets with size over 1024." ::= { pmTcaIfPkt102415mEntry 4 } pmTcaIfPkt102415mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of packets with size over 1024." ::= { pmTcaIfPkt102415mEntry 5 } pmTcaIfPkt102415mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt102415mEntry 6 } pmTcaIfPkt10241hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt10241hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 56 } pmTcaIfPkt10241hEntry OBJECT-TYPE SYNTAX PMTcaIfPkt10241hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt10241hIndex } ::= { pmTcaIfPkt10241hTable 1 } PMTcaIfPkt10241hEntry ::= SEQUENCE { pmTcaIfPkt10241hIndex Integer32, pmTcaIfPkt10241hId OCTET STRING, pmTcaIfPkt10241hUnitType INTEGER, pmTcaIfPkt10241hCnt Counter64, pmTcaIfPkt10241hThreshold Counter64, pmTcaIfPkt10241hOccurTime DateAndTime } pmTcaIfPkt10241hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt10241hEntry 1 } pmTcaIfPkt10241hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt10241hEntry 2 } pmTcaIfPkt10241hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt10241hEntry 3 } pmTcaIfPkt10241hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of packets with size over 1024." ::= { pmTcaIfPkt10241hEntry 4 } pmTcaIfPkt10241hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of packets with size over 1024." ::= { pmTcaIfPkt10241hEntry 5 } pmTcaIfPkt10241hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt10241hEntry 6 } pmTcaIfPkt10241dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfPkt10241dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 57 } pmTcaIfPkt10241dEntry OBJECT-TYPE SYNTAX PMTcaIfPkt10241dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfPkt10241dIndex } ::= { pmTcaIfPkt10241dTable 1 } PMTcaIfPkt10241dEntry ::= SEQUENCE { pmTcaIfPkt10241dIndex Integer32, pmTcaIfPkt10241dId OCTET STRING, pmTcaIfPkt10241dUnitType INTEGER, pmTcaIfPkt10241dCnt Counter64, pmTcaIfPkt10241dThreshold Counter64, pmTcaIfPkt10241dOccurTime DateAndTime } pmTcaIfPkt10241dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfPkt10241dEntry 1 } pmTcaIfPkt10241dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfPkt10241dEntry 2 } pmTcaIfPkt10241dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfPkt10241dEntry 3 } pmTcaIfPkt10241dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of packets with size over 1024." ::= { pmTcaIfPkt10241dEntry 4 } pmTcaIfPkt10241dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of packets with size over 1024." ::= { pmTcaIfPkt10241dEntry 5 } pmTcaIfPkt10241dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfPkt10241dEntry 6 } pmTcaIfOutPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 58 } pmTcaIfOutPkts15mEntry OBJECT-TYPE SYNTAX PMTcaIfOutPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutPkts15mIndex } ::= { pmTcaIfOutPkts15mTable 1 } PMTcaIfOutPkts15mEntry ::= SEQUENCE { pmTcaIfOutPkts15mIndex Integer32, pmTcaIfOutPkts15mId OCTET STRING, pmTcaIfOutPkts15mUnitType INTEGER, pmTcaIfOutPkts15mCnt Counter64, pmTcaIfOutPkts15mThreshold Counter64, pmTcaIfOutPkts15mOccurTime DateAndTime } pmTcaIfOutPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutPkts15mEntry 1 } pmTcaIfOutPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutPkts15mEntry 2 } pmTcaIfOutPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutPkts15mEntry 3 } pmTcaIfOutPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of output packets." ::= { pmTcaIfOutPkts15mEntry 4 } pmTcaIfOutPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of output packets." ::= { pmTcaIfOutPkts15mEntry 5 } pmTcaIfOutPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutPkts15mEntry 6 } pmTcaIfOutPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 59 } pmTcaIfOutPkts1hEntry OBJECT-TYPE SYNTAX PMTcaIfOutPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutPkts1hIndex } ::= { pmTcaIfOutPkts1hTable 1 } PMTcaIfOutPkts1hEntry ::= SEQUENCE { pmTcaIfOutPkts1hIndex Integer32, pmTcaIfOutPkts1hId OCTET STRING, pmTcaIfOutPkts1hUnitType INTEGER, pmTcaIfOutPkts1hCnt Counter64, pmTcaIfOutPkts1hThreshold Counter64, pmTcaIfOutPkts1hOccurTime DateAndTime } pmTcaIfOutPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutPkts1hEntry 1 } pmTcaIfOutPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutPkts1hEntry 2 } pmTcaIfOutPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutPkts1hEntry 3 } pmTcaIfOutPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of output packets." ::= { pmTcaIfOutPkts1hEntry 4 } pmTcaIfOutPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of output packets." ::= { pmTcaIfOutPkts1hEntry 5 } pmTcaIfOutPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutPkts1hEntry 6 } pmTcaIfOutPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 60 } pmTcaIfOutPkts1dEntry OBJECT-TYPE SYNTAX PMTcaIfOutPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutPkts1dIndex } ::= { pmTcaIfOutPkts1dTable 1 } PMTcaIfOutPkts1dEntry ::= SEQUENCE { pmTcaIfOutPkts1dIndex Integer32, pmTcaIfOutPkts1dId OCTET STRING, pmTcaIfOutPkts1dUnitType INTEGER, pmTcaIfOutPkts1dCnt Counter64, pmTcaIfOutPkts1dThreshold Counter64, pmTcaIfOutPkts1dOccurTime DateAndTime } pmTcaIfOutPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutPkts1dEntry 1 } pmTcaIfOutPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutPkts1dEntry 2 } pmTcaIfOutPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutPkts1dEntry 3 } pmTcaIfOutPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of output packets." ::= { pmTcaIfOutPkts1dEntry 4 } pmTcaIfOutPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of output packets." ::= { pmTcaIfOutPkts1dEntry 5 } pmTcaIfOutPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutPkts1dEntry 6 } pmTcaIfOutBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 61 } pmTcaIfOutBytes15mEntry OBJECT-TYPE SYNTAX PMTcaIfOutBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutBytes15mIndex } ::= { pmTcaIfOutBytes15mTable 1 } PMTcaIfOutBytes15mEntry ::= SEQUENCE { pmTcaIfOutBytes15mIndex Integer32, pmTcaIfOutBytes15mId OCTET STRING, pmTcaIfOutBytes15mUnitType INTEGER, pmTcaIfOutBytes15mCnt Counter64, pmTcaIfOutBytes15mThreshold Counter64, pmTcaIfOutBytes15mOccurTime DateAndTime } pmTcaIfOutBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutBytes15mEntry 1 } pmTcaIfOutBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutBytes15mEntry 2 } pmTcaIfOutBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutBytes15mEntry 3 } pmTcaIfOutBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of output bytes." ::= { pmTcaIfOutBytes15mEntry 4 } pmTcaIfOutBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of output bytes." ::= { pmTcaIfOutBytes15mEntry 5 } pmTcaIfOutBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutBytes15mEntry 6 } pmTcaIfOutBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 62 } pmTcaIfOutBytes1hEntry OBJECT-TYPE SYNTAX PMTcaIfOutBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutBytes1hIndex } ::= { pmTcaIfOutBytes1hTable 1 } PMTcaIfOutBytes1hEntry ::= SEQUENCE { pmTcaIfOutBytes1hIndex Integer32, pmTcaIfOutBytes1hId OCTET STRING, pmTcaIfOutBytes1hUnitType INTEGER, pmTcaIfOutBytes1hCnt Counter64, pmTcaIfOutBytes1hThreshold Counter64, pmTcaIfOutBytes1hOccurTime DateAndTime } pmTcaIfOutBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutBytes1hEntry 1 } pmTcaIfOutBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutBytes1hEntry 2 } pmTcaIfOutBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutBytes1hEntry 3 } pmTcaIfOutBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of output bytes." ::= { pmTcaIfOutBytes1hEntry 4 } pmTcaIfOutBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of output bytes." ::= { pmTcaIfOutBytes1hEntry 5 } pmTcaIfOutBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutBytes1hEntry 6 } pmTcaIfOutBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaIfOutBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains interface information of all units." ::= { pmIfStatistics 63 } pmTcaIfOutBytes1dEntry OBJECT-TYPE SYNTAX PMTcaIfOutBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface information of all units." INDEX { pmTcaIfOutBytes1dIndex } ::= { pmTcaIfOutBytes1dTable 1 } PMTcaIfOutBytes1dEntry ::= SEQUENCE { pmTcaIfOutBytes1dIndex Integer32, pmTcaIfOutBytes1dId OCTET STRING, pmTcaIfOutBytes1dUnitType INTEGER, pmTcaIfOutBytes1dCnt Counter64, pmTcaIfOutBytes1dThreshold Counter64, pmTcaIfOutBytes1dOccurTime DateAndTime } pmTcaIfOutBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaIfOutBytes1dEntry 1 } pmTcaIfOutBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name." ::= { pmTcaIfOutBytes1dEntry 2 } pmTcaIfOutBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaIfOutBytes1dEntry 3 } pmTcaIfOutBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of output bytes." ::= { pmTcaIfOutBytes1dEntry 4 } pmTcaIfOutBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of output bytes." ::= { pmTcaIfOutBytes1dEntry 5 } pmTcaIfOutBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaIfOutBytes1dEntry 6 } pmLspPe OBJECT IDENTIFIER ::= { pm 103 } pmLspPeCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPeCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 1 } pmLspPeCurr15mEntry OBJECT-TYPE SYNTAX PMLspPeCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPeCurr15mIndex } ::= { pmLspPeCurr15mTable 1 } PMLspPeCurr15mEntry ::= SEQUENCE { pmLspPeCurr15mIndex Integer32, pmLspPeCurr15mId OCTET STRING, pmLspPeCurr15mUnitType INTEGER, pmLspPeCurr15mOutPkts Counter64, pmLspPeCurr15mOutBytes Counter64, pmLspPeCurr15mStartTime DateAndTime, pmLspPeCurr15mStopTime DateAndTime } pmLspPeCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPeCurr15mEntry 1 } pmLspPeCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPeCurr15mEntry 2 } pmLspPeCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPeCurr15mEntry 3 } pmLspPeCurr15mOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-pe out packets." ::= { pmLspPeCurr15mEntry 4 } pmLspPeCurr15mOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-pe out bytes." ::= { pmLspPeCurr15mEntry 5 } pmLspPeCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmLspPeCurr15mEntry 100 } pmLspPeCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmLspPeCurr15mEntry 101 } pmLspPePrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPePrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 2 } pmLspPePrev15mEntry OBJECT-TYPE SYNTAX PMLspPePrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPePrev15mIndex } ::= { pmLspPePrev15mTable 1 } PMLspPePrev15mEntry ::= SEQUENCE { pmLspPePrev15mIndex Integer32, pmLspPePrev15mId OCTET STRING, pmLspPePrev15mUnitType INTEGER, pmLspPePrev15mOutPkts Counter64, pmLspPePrev15mOutBytes Counter64, pmLspPePrev15mStartTime DateAndTime, pmLspPePrev15mStopTime DateAndTime } pmLspPePrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPePrev15mEntry 1 } pmLspPePrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPePrev15mEntry 2 } pmLspPePrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPePrev15mEntry 3 } pmLspPePrev15mOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-pe out packets." ::= { pmLspPePrev15mEntry 4 } pmLspPePrev15mOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-pe out bytes." ::= { pmLspPePrev15mEntry 5 } pmLspPePrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmLspPePrev15mEntry 100 } pmLspPePrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmLspPePrev15mEntry 101 } pmLspPeCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPeCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 3 } pmLspPeCurr1hEntry OBJECT-TYPE SYNTAX PMLspPeCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPeCurr1hIndex } ::= { pmLspPeCurr1hTable 1 } PMLspPeCurr1hEntry ::= SEQUENCE { pmLspPeCurr1hIndex Integer32, pmLspPeCurr1hId OCTET STRING, pmLspPeCurr1hUnitType INTEGER, pmLspPeCurr1hOutPkts Counter64, pmLspPeCurr1hOutBytes Counter64, pmLspPeCurr1hStartTime DateAndTime, pmLspPeCurr1hStopTime DateAndTime } pmLspPeCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPeCurr1hEntry 1 } pmLspPeCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPeCurr1hEntry 2 } pmLspPeCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPeCurr1hEntry 3 } pmLspPeCurr1hOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-pe out packets." ::= { pmLspPeCurr1hEntry 4 } pmLspPeCurr1hOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-pe out bytes." ::= { pmLspPeCurr1hEntry 5 } pmLspPeCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmLspPeCurr1hEntry 100 } pmLspPeCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmLspPeCurr1hEntry 101 } pmLspPePrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPePrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 4 } pmLspPePrev1hEntry OBJECT-TYPE SYNTAX PMLspPePrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPePrev1hIndex } ::= { pmLspPePrev1hTable 1 } PMLspPePrev1hEntry ::= SEQUENCE { pmLspPePrev1hIndex Integer32, pmLspPePrev1hId OCTET STRING, pmLspPePrev1hUnitType INTEGER, pmLspPePrev1hOutPkts Counter64, pmLspPePrev1hOutBytes Counter64, pmLspPePrev1hStartTime DateAndTime, pmLspPePrev1hStopTime DateAndTime } pmLspPePrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPePrev1hEntry 1 } pmLspPePrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPePrev1hEntry 2 } pmLspPePrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPePrev1hEntry 3 } pmLspPePrev1hOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-pe out packets." ::= { pmLspPePrev1hEntry 4 } pmLspPePrev1hOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-pe out bytes." ::= { pmLspPePrev1hEntry 5 } pmLspPePrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmLspPePrev1hEntry 100 } pmLspPePrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmLspPePrev1hEntry 101 } pmLspPeCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPeCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 5 } pmLspPeCurr1dEntry OBJECT-TYPE SYNTAX PMLspPeCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPeCurr1dIndex } ::= { pmLspPeCurr1dTable 1 } PMLspPeCurr1dEntry ::= SEQUENCE { pmLspPeCurr1dIndex Integer32, pmLspPeCurr1dId OCTET STRING, pmLspPeCurr1dUnitType INTEGER, pmLspPeCurr1dOutPkts Counter64, pmLspPeCurr1dOutBytes Counter64, pmLspPeCurr1dStartTime DateAndTime, pmLspPeCurr1dStopTime DateAndTime } pmLspPeCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPeCurr1dEntry 1 } pmLspPeCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPeCurr1dEntry 2 } pmLspPeCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPeCurr1dEntry 3 } pmLspPeCurr1dOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of lsp-pe out packets." ::= { pmLspPeCurr1dEntry 4 } pmLspPeCurr1dOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of lsp-pe out bytes." ::= { pmLspPeCurr1dEntry 5 } pmLspPeCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmLspPeCurr1dEntry 100 } pmLspPeCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmLspPeCurr1dEntry 101 } pmLspPePrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPePrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 6 } pmLspPePrev1dEntry OBJECT-TYPE SYNTAX PMLspPePrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmLspPePrev1dIndex } ::= { pmLspPePrev1dTable 1 } PMLspPePrev1dEntry ::= SEQUENCE { pmLspPePrev1dIndex Integer32, pmLspPePrev1dId OCTET STRING, pmLspPePrev1dUnitType INTEGER, pmLspPePrev1dOutPkts Counter64, pmLspPePrev1dOutBytes Counter64, pmLspPePrev1dStartTime DateAndTime, pmLspPePrev1dStopTime DateAndTime } pmLspPePrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPePrev1dEntry 1 } pmLspPePrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmLspPePrev1dEntry 2 } pmLspPePrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPePrev1dEntry 3 } pmLspPePrev1dOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous1day counter of lsp-pe out packets." ::= { pmLspPePrev1dEntry 4 } pmLspPePrev1dOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous1day counter of lsp-pe out bytes." ::= { pmLspPePrev1dEntry 5 } pmLspPePrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous1day start time." ::= { pmLspPePrev1dEntry 100 } pmLspPePrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous1day stop time." ::= { pmLspPePrev1dEntry 101 } pmTcaLspPeOutPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 7 } pmTcaLspPeOutPkts15mEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutPkts15mIndex } ::= { pmTcaLspPeOutPkts15mTable 1 } PMTcaLspPeOutPkts15mEntry ::= SEQUENCE { pmTcaLspPeOutPkts15mIndex Integer32, pmTcaLspPeOutPkts15mId OCTET STRING, pmTcaLspPeOutPkts15mUnitType INTEGER, pmTcaLspPeOutPkts15mCnt Counter64, pmTcaLspPeOutPkts15mThreshold Counter64, pmTcaLspPeOutPkts15mOccurTime DateAndTime } pmTcaLspPeOutPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutPkts15mEntry 1 } pmTcaLspPeOutPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutPkts15mEntry 2 } pmTcaLspPeOutPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutPkts15mEntry 3 } pmTcaLspPeOutPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-pe out packets." ::= { pmTcaLspPeOutPkts15mEntry 4 } pmTcaLspPeOutPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-pe out packets." ::= { pmTcaLspPeOutPkts15mEntry 5 } pmTcaLspPeOutPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutPkts15mEntry 6 } pmTcaLspPeOutPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 8 } pmTcaLspPeOutPkts1hEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutPkts1hIndex } ::= { pmTcaLspPeOutPkts1hTable 1 } PMTcaLspPeOutPkts1hEntry ::= SEQUENCE { pmTcaLspPeOutPkts1hIndex Integer32, pmTcaLspPeOutPkts1hId OCTET STRING, pmTcaLspPeOutPkts1hUnitType INTEGER, pmTcaLspPeOutPkts1hCnt Counter64, pmTcaLspPeOutPkts1hThreshold Counter64, pmTcaLspPeOutPkts1hOccurTime DateAndTime } pmTcaLspPeOutPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutPkts1hEntry 1 } pmTcaLspPeOutPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutPkts1hEntry 2 } pmTcaLspPeOutPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutPkts1hEntry 3 } pmTcaLspPeOutPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-pe out packets." ::= { pmTcaLspPeOutPkts1hEntry 4 } pmTcaLspPeOutPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-pe out packets." ::= { pmTcaLspPeOutPkts1hEntry 5 } pmTcaLspPeOutPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutPkts1hEntry 6 } pmTcaLspPeOutPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 9 } pmTcaLspPeOutPkts1dEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutPkts1dIndex } ::= { pmTcaLspPeOutPkts1dTable 1 } PMTcaLspPeOutPkts1dEntry ::= SEQUENCE { pmTcaLspPeOutPkts1dIndex Integer32, pmTcaLspPeOutPkts1dId OCTET STRING, pmTcaLspPeOutPkts1dUnitType INTEGER, pmTcaLspPeOutPkts1dCnt Counter64, pmTcaLspPeOutPkts1dThreshold Counter64, pmTcaLspPeOutPkts1dOccurTime DateAndTime } pmTcaLspPeOutPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutPkts1dEntry 1 } pmTcaLspPeOutPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutPkts1dEntry 2 } pmTcaLspPeOutPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutPkts1dEntry 3 } pmTcaLspPeOutPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-pe out packets." ::= { pmTcaLspPeOutPkts1dEntry 4 } pmTcaLspPeOutPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-pe out packets." ::= { pmTcaLspPeOutPkts1dEntry 5 } pmTcaLspPeOutPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutPkts1dEntry 6 } pmTcaLspPeOutBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 10 } pmTcaLspPeOutBytes15mEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutBytes15mIndex } ::= { pmTcaLspPeOutBytes15mTable 1 } PMTcaLspPeOutBytes15mEntry ::= SEQUENCE { pmTcaLspPeOutBytes15mIndex Integer32, pmTcaLspPeOutBytes15mId OCTET STRING, pmTcaLspPeOutBytes15mUnitType INTEGER, pmTcaLspPeOutBytes15mCnt Counter64, pmTcaLspPeOutBytes15mThreshold Counter64, pmTcaLspPeOutBytes15mOccurTime DateAndTime } pmTcaLspPeOutBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutBytes15mEntry 1 } pmTcaLspPeOutBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutBytes15mEntry 2 } pmTcaLspPeOutBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutBytes15mEntry 3 } pmTcaLspPeOutBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes15mEntry 4 } pmTcaLspPeOutBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes15mEntry 5 } pmTcaLspPeOutBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutBytes15mEntry 6 } pmTcaLspPeOutBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 11 } pmTcaLspPeOutBytes1hEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutBytes1hIndex } ::= { pmTcaLspPeOutBytes1hTable 1 } PMTcaLspPeOutBytes1hEntry ::= SEQUENCE { pmTcaLspPeOutBytes1hIndex Integer32, pmTcaLspPeOutBytes1hId OCTET STRING, pmTcaLspPeOutBytes1hUnitType INTEGER, pmTcaLspPeOutBytes1hCnt Counter64, pmTcaLspPeOutBytes1hThreshold Counter64, pmTcaLspPeOutBytes1hOccurTime DateAndTime } pmTcaLspPeOutBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutBytes1hEntry 1 } pmTcaLspPeOutBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutBytes1hEntry 2 } pmTcaLspPeOutBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutBytes1hEntry 3 } pmTcaLspPeOutBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes1hEntry 4 } pmTcaLspPeOutBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes1hEntry 5 } pmTcaLspPeOutBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutBytes1hEntry 6 } pmTcaLspPeOutBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPeOutBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-pe information of all units." ::= { pmLspPe 12 } pmTcaLspPeOutBytes1dEntry OBJECT-TYPE SYNTAX PMTcaLspPeOutBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-pe information of all units." INDEX { pmTcaLspPeOutBytes1dIndex } ::= { pmTcaLspPeOutBytes1dTable 1 } PMTcaLspPeOutBytes1dEntry ::= SEQUENCE { pmTcaLspPeOutBytes1dIndex Integer32, pmTcaLspPeOutBytes1dId OCTET STRING, pmTcaLspPeOutBytes1dUnitType INTEGER, pmTcaLspPeOutBytes1dCnt Counter64, pmTcaLspPeOutBytes1dThreshold Counter64, pmTcaLspPeOutBytes1dOccurTime DateAndTime } pmTcaLspPeOutBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPeOutBytes1dEntry 1 } pmTcaLspPeOutBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-pe name." ::= { pmTcaLspPeOutBytes1dEntry 2 } pmTcaLspPeOutBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPeOutBytes1dEntry 3 } pmTcaLspPeOutBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes1dEntry 4 } pmTcaLspPeOutBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-pe out bytes." ::= { pmTcaLspPeOutBytes1dEntry 5 } pmTcaLspPeOutBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPeOutBytes1dEntry 6 } pmLspP OBJECT IDENTIFIER ::= { pm 104 } pmLspPCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 1 } pmLspPCurr15mEntry OBJECT-TYPE SYNTAX PMLspPCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPCurr15mIndex } ::= { pmLspPCurr15mTable 1 } PMLspPCurr15mEntry ::= SEQUENCE { pmLspPCurr15mIndex Integer32, pmLspPCurr15mId OCTET STRING, pmLspPCurr15mUnitType INTEGER, pmLspPCurr15mEastInPkts Counter64, pmLspPCurr15mEastInBytes Counter64, pmLspPCurr15mWestInPkts Counter64, pmLspPCurr15mWestInBytes Counter64, pmLspPCurr15mStartTime DateAndTime, pmLspPCurr15mStopTime DateAndTime } pmLspPCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPCurr15mEntry 1 } pmLspPCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPCurr15mEntry 2 } pmLspPCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPCurr15mEntry 3 } pmLspPCurr15mEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-p east ingress packets." ::= { pmLspPCurr15mEntry 4 } pmLspPCurr15mEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-p east ingress bytes." ::= { pmLspPCurr15mEntry 5 } pmLspPCurr15mWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-p west ingress packets." ::= { pmLspPCurr15mEntry 6 } pmLspPCurr15mWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of lsp-p west ingress bytes." ::= { pmLspPCurr15mEntry 7 } pmLspPCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmLspPCurr15mEntry 100 } pmLspPCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmLspPCurr15mEntry 101 } pmLspPPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 2 } pmLspPPrev15mEntry OBJECT-TYPE SYNTAX PMLspPPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPPrev15mIndex } ::= { pmLspPPrev15mTable 1 } PMLspPPrev15mEntry ::= SEQUENCE { pmLspPPrev15mIndex Integer32, pmLspPPrev15mId OCTET STRING, pmLspPPrev15mUnitType INTEGER, pmLspPPrev15mEastInPkts Counter64, pmLspPPrev15mEastInBytes Counter64, pmLspPPrev15mWestInPkts Counter64, pmLspPPrev15mWestInBytes Counter64, pmLspPPrev15mStartTime DateAndTime, pmLspPPrev15mStopTime DateAndTime } pmLspPPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPPrev15mEntry 1 } pmLspPPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPPrev15mEntry 2 } pmLspPPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPPrev15mEntry 3 } pmLspPPrev15mEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-p east ingress packets." ::= { pmLspPPrev15mEntry 4 } pmLspPPrev15mEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-p east ingress bytes." ::= { pmLspPPrev15mEntry 5 } pmLspPPrev15mWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-p west ingress packets." ::= { pmLspPPrev15mEntry 6 } pmLspPPrev15mWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of lsp-p west ingress bytes." ::= { pmLspPPrev15mEntry 7 } pmLspPPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmLspPPrev15mEntry 100 } pmLspPPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmLspPPrev15mEntry 101 } pmLspPCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 3 } pmLspPCurr1hEntry OBJECT-TYPE SYNTAX PMLspPCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPCurr1hIndex } ::= { pmLspPCurr1hTable 1 } PMLspPCurr1hEntry ::= SEQUENCE { pmLspPCurr1hIndex Integer32, pmLspPCurr1hId OCTET STRING, pmLspPCurr1hUnitType INTEGER, pmLspPCurr1hEastInPkts Counter64, pmLspPCurr1hEastInBytes Counter64, pmLspPCurr1hWestInPkts Counter64, pmLspPCurr1hWestInBytes Counter64, pmLspPCurr1hStartTime DateAndTime, pmLspPCurr1hStopTime DateAndTime } pmLspPCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPCurr1hEntry 1 } pmLspPCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPCurr1hEntry 2 } pmLspPCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPCurr1hEntry 3 } pmLspPCurr1hEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-p east ingress packets." ::= { pmLspPCurr1hEntry 4 } pmLspPCurr1hEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-p east ingress bytes." ::= { pmLspPCurr1hEntry 5 } pmLspPCurr1hWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-p west ingress packets." ::= { pmLspPCurr1hEntry 6 } pmLspPCurr1hWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of lsp-p west ingress bytes." ::= { pmLspPCurr1hEntry 7 } pmLspPCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmLspPCurr1hEntry 100 } pmLspPCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmLspPCurr1hEntry 101 } pmLspPPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 4 } pmLspPPrev1hEntry OBJECT-TYPE SYNTAX PMLspPPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPPrev1hIndex } ::= { pmLspPPrev1hTable 1 } PMLspPPrev1hEntry ::= SEQUENCE { pmLspPPrev1hIndex Integer32, pmLspPPrev1hId OCTET STRING, pmLspPPrev1hUnitType INTEGER, pmLspPPrev1hEastInPkts Counter64, pmLspPPrev1hEastInBytes Counter64, pmLspPPrev1hWestInPkts Counter64, pmLspPPrev1hWestInBytes Counter64, pmLspPPrev1hStartTime DateAndTime, pmLspPPrev1hStopTime DateAndTime } pmLspPPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPPrev1hEntry 1 } pmLspPPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPPrev1hEntry 2 } pmLspPPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPPrev1hEntry 3 } pmLspPPrev1hEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-p east ingress packets." ::= { pmLspPPrev1hEntry 4 } pmLspPPrev1hEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-p east ingress bytes." ::= { pmLspPPrev1hEntry 5 } pmLspPPrev1hWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-p west ingress packets." ::= { pmLspPPrev1hEntry 6 } pmLspPPrev1hWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of lsp-p west ingress bytes." ::= { pmLspPPrev1hEntry 7 } pmLspPPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmLspPPrev1hEntry 100 } pmLspPPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmLspPPrev1hEntry 101 } pmLspPCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 5 } pmLspPCurr1dEntry OBJECT-TYPE SYNTAX PMLspPCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPCurr1dIndex } ::= { pmLspPCurr1dTable 1 } PMLspPCurr1dEntry ::= SEQUENCE { pmLspPCurr1dIndex Integer32, pmLspPCurr1dId OCTET STRING, pmLspPCurr1dUnitType INTEGER, pmLspPCurr1dEastInPkts Counter64, pmLspPCurr1dEastInBytes Counter64, pmLspPCurr1dWestInPkts Counter64, pmLspPCurr1dWestInBytes Counter64, pmLspPCurr1dStartTime DateAndTime, pmLspPCurr1dStopTime DateAndTime } pmLspPCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPCurr1dEntry 1 } pmLspPCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPCurr1dEntry 2 } pmLspPCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPCurr1dEntry 3 } pmLspPCurr1dEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d counter of lsp-p east ingress packets." ::= { pmLspPCurr1dEntry 4 } pmLspPCurr1dEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d counter of lsp-p east ingress bytes." ::= { pmLspPCurr1dEntry 5 } pmLspPCurr1dWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d counter of lsp-p west ingress packets." ::= { pmLspPCurr1dEntry 6 } pmLspPCurr1dWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d counter of lsp-p west ingress bytes." ::= { pmLspPCurr1dEntry 7 } pmLspPCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d start time." ::= { pmLspPCurr1dEntry 100 } pmLspPCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1d stop time." ::= { pmLspPCurr1dEntry 101 } pmLspPPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMLspPPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 6 } pmLspPPrev1dEntry OBJECT-TYPE SYNTAX PMLspPPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ls-p information of all units." INDEX { pmLspPPrev1dIndex } ::= { pmLspPPrev1dTable 1 } PMLspPPrev1dEntry ::= SEQUENCE { pmLspPPrev1dIndex Integer32, pmLspPPrev1dId OCTET STRING, pmLspPPrev1dUnitType INTEGER, pmLspPPrev1dEastInPkts Counter64, pmLspPPrev1dEastInBytes Counter64, pmLspPPrev1dWestInPkts Counter64, pmLspPPrev1dWestInBytes Counter64, pmLspPPrev1dStartTime DateAndTime, pmLspPPrev1dStopTime DateAndTime } pmLspPPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmLspPPrev1dEntry 1 } pmLspPPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmLspPPrev1dEntry 2 } pmLspPPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmLspPPrev1dEntry 3 } pmLspPPrev1dEastInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d counter of lsp-p east ingress packets." ::= { pmLspPPrev1dEntry 4 } pmLspPPrev1dEastInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d counter of lsp-p east ingress bytes." ::= { pmLspPPrev1dEntry 5 } pmLspPPrev1dWestInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d counter of lsp-p west ingress packets." ::= { pmLspPPrev1dEntry 6 } pmLspPPrev1dWestInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d counter of lsp-p west ingress bytes." ::= { pmLspPPrev1dEntry 7 } pmLspPPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d start time." ::= { pmLspPPrev1dEntry 100 } pmLspPPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1d stop time." ::= { pmLspPPrev1dEntry 101 } pmTcaLspPEastInPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 7 } pmTcaLspPEastInPkts15mEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInPkts15mIndex } ::= { pmTcaLspPEastInPkts15mTable 1 } PMTcaLspPEastInPkts15mEntry ::= SEQUENCE { pmTcaLspPEastInPkts15mIndex Integer32, pmTcaLspPEastInPkts15mId OCTET STRING, pmTcaLspPEastInPkts15mUnitType INTEGER, pmTcaLspPEastInPkts15mCnt Counter64, pmTcaLspPEastInPkts15mThreshold Counter64, pmTcaLspPEastInPkts15mOccurTime DateAndTime } pmTcaLspPEastInPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInPkts15mEntry 1 } pmTcaLspPEastInPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInPkts15mEntry 2 } pmTcaLspPEastInPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInPkts15mEntry 3 } pmTcaLspPEastInPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts15mEntry 4 } pmTcaLspPEastInPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts15mEntry 5 } pmTcaLspPEastInPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInPkts15mEntry 6 } pmTcaLspPEastInPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 8 } pmTcaLspPEastInPkts1hEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInPkts1hIndex } ::= { pmTcaLspPEastInPkts1hTable 1 } PMTcaLspPEastInPkts1hEntry ::= SEQUENCE { pmTcaLspPEastInPkts1hIndex Integer32, pmTcaLspPEastInPkts1hId OCTET STRING, pmTcaLspPEastInPkts1hUnitType INTEGER, pmTcaLspPEastInPkts1hCnt Counter64, pmTcaLspPEastInPkts1hThreshold Counter64, pmTcaLspPEastInPkts1hOccurTime DateAndTime } pmTcaLspPEastInPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInPkts1hEntry 1 } pmTcaLspPEastInPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInPkts1hEntry 2 } pmTcaLspPEastInPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInPkts1hEntry 3 } pmTcaLspPEastInPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts1hEntry 4 } pmTcaLspPEastInPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts1hEntry 5 } pmTcaLspPEastInPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInPkts1hEntry 6 } pmTcaLspPEastInPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 9 } pmTcaLspPEastInPkts1dEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInPkts1dIndex } ::= { pmTcaLspPEastInPkts1dTable 1 } PMTcaLspPEastInPkts1dEntry ::= SEQUENCE { pmTcaLspPEastInPkts1dIndex Integer32, pmTcaLspPEastInPkts1dId OCTET STRING, pmTcaLspPEastInPkts1dUnitType INTEGER, pmTcaLspPEastInPkts1dCnt Counter64, pmTcaLspPEastInPkts1dThreshold Counter64, pmTcaLspPEastInPkts1dOccurTime DateAndTime } pmTcaLspPEastInPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInPkts1dEntry 1 } pmTcaLspPEastInPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInPkts1dEntry 2 } pmTcaLspPEastInPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInPkts1dEntry 3 } pmTcaLspPEastInPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts1dEntry 4 } pmTcaLspPEastInPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-p east ingress packets." ::= { pmTcaLspPEastInPkts1dEntry 5 } pmTcaLspPEastInPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInPkts1dEntry 6 } pmTcaLspPEastInBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 10 } pmTcaLspPEastInBytes15mEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInBytes15mIndex } ::= { pmTcaLspPEastInBytes15mTable 1 } PMTcaLspPEastInBytes15mEntry ::= SEQUENCE { pmTcaLspPEastInBytes15mIndex Integer32, pmTcaLspPEastInBytes15mId OCTET STRING, pmTcaLspPEastInBytes15mUnitType INTEGER, pmTcaLspPEastInBytes15mCnt Counter64, pmTcaLspPEastInBytes15mThreshold Counter64, pmTcaLspPEastInBytes15mOccurTime DateAndTime } pmTcaLspPEastInBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInBytes15mEntry 1 } pmTcaLspPEastInBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInBytes15mEntry 2 } pmTcaLspPEastInBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInBytes15mEntry 3 } pmTcaLspPEastInBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes15mEntry 4 } pmTcaLspPEastInBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes15mEntry 5 } pmTcaLspPEastInBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInBytes15mEntry 6 } pmTcaLspPEastInBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 11 } pmTcaLspPEastInBytes1hEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInBytes1hIndex } ::= { pmTcaLspPEastInBytes1hTable 1 } PMTcaLspPEastInBytes1hEntry ::= SEQUENCE { pmTcaLspPEastInBytes1hIndex Integer32, pmTcaLspPEastInBytes1hId OCTET STRING, pmTcaLspPEastInBytes1hUnitType INTEGER, pmTcaLspPEastInBytes1hCnt Counter64, pmTcaLspPEastInBytes1hThreshold Counter64, pmTcaLspPEastInBytes1hOccurTime DateAndTime } pmTcaLspPEastInBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInBytes1hEntry 1 } pmTcaLspPEastInBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInBytes1hEntry 2 } pmTcaLspPEastInBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInBytes1hEntry 3 } pmTcaLspPEastInBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes1hEntry 4 } pmTcaLspPEastInBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes1hEntry 5 } pmTcaLspPEastInBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInBytes1hEntry 6 } pmTcaLspPEastInBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPEastInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 12 } pmTcaLspPEastInBytes1dEntry OBJECT-TYPE SYNTAX PMTcaLspPEastInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPEastInBytes1dIndex } ::= { pmTcaLspPEastInBytes1dTable 1 } PMTcaLspPEastInBytes1dEntry ::= SEQUENCE { pmTcaLspPEastInBytes1dIndex Integer32, pmTcaLspPEastInBytes1dId OCTET STRING, pmTcaLspPEastInBytes1dUnitType INTEGER, pmTcaLspPEastInBytes1dCnt Counter64, pmTcaLspPEastInBytes1dThreshold Counter64, pmTcaLspPEastInBytes1dOccurTime DateAndTime } pmTcaLspPEastInBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPEastInBytes1dEntry 1 } pmTcaLspPEastInBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPEastInBytes1dEntry 2 } pmTcaLspPEastInBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPEastInBytes1dEntry 3 } pmTcaLspPEastInBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes1dEntry 4 } pmTcaLspPEastInBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-p east ingress bytes." ::= { pmTcaLspPEastInBytes1dEntry 5 } pmTcaLspPEastInBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPEastInBytes1dEntry 6 } pmTcaLspPWestInPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 13 } pmTcaLspPWestInPkts15mEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPWestInPkts15mIndex } ::= { pmTcaLspPWestInPkts15mTable 1 } PMTcaLspPWestInPkts15mEntry ::= SEQUENCE { pmTcaLspPWestInPkts15mIndex Integer32, pmTcaLspPWestInPkts15mId OCTET STRING, pmTcaLspPWestInPkts15mUnitType INTEGER, pmTcaLspPWestInPkts15mCnt Counter64, pmTcaLspPWestInPkts15mThreshold Counter64, pmTcaLspPWestInPkts15mOccurTime DateAndTime } pmTcaLspPWestInPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInPkts15mEntry 1 } pmTcaLspPWestInPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInPkts15mEntry 2 } pmTcaLspPWestInPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInPkts15mEntry 3 } pmTcaLspPWestInPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts15mEntry 4 } pmTcaLspPWestInPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts15mEntry 5 } pmTcaLspPWestInPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInPkts15mEntry 6 } pmTcaLspPWestInPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 14 } pmTcaLspPWestInPkts1hEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPWestInPkts1hIndex } ::= { pmTcaLspPWestInPkts1hTable 1 } PMTcaLspPWestInPkts1hEntry ::= SEQUENCE { pmTcaLspPWestInPkts1hIndex Integer32, pmTcaLspPWestInPkts1hId OCTET STRING, pmTcaLspPWestInPkts1hUnitType INTEGER, pmTcaLspPWestInPkts1hCnt Counter64, pmTcaLspPWestInPkts1hThreshold Counter64, pmTcaLspPWestInPkts1hOccurTime DateAndTime } pmTcaLspPWestInPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInPkts1hEntry 1 } pmTcaLspPWestInPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInPkts1hEntry 2 } pmTcaLspPWestInPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInPkts1hEntry 3 } pmTcaLspPWestInPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts1hEntry 4 } pmTcaLspPWestInPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts1hEntry 5 } pmTcaLspPWestInPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInPkts1hEntry 6 } pmTcaLspPWestInPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 15 } pmTcaLspPWestInPkts1dEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPWestInPkts1dIndex } ::= { pmTcaLspPWestInPkts1dTable 1 } PMTcaLspPWestInPkts1dEntry ::= SEQUENCE { pmTcaLspPWestInPkts1dIndex Integer32, pmTcaLspPWestInPkts1dId OCTET STRING, pmTcaLspPWestInPkts1dUnitType INTEGER, pmTcaLspPWestInPkts1dCnt Counter64, pmTcaLspPWestInPkts1dThreshold Counter64, pmTcaLspPWestInPkts1dOccurTime DateAndTime } pmTcaLspPWestInPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInPkts1dEntry 1 } pmTcaLspPWestInPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInPkts1dEntry 2 } pmTcaLspPWestInPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInPkts1dEntry 3 } pmTcaLspPWestInPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts1dEntry 4 } pmTcaLspPWestInPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-p west ingress packets." ::= { pmTcaLspPWestInPkts1dEntry 5 } pmTcaLspPWestInPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInPkts1dEntry 6 } pmTcaLspPWestInBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 16 } pmTcaLspPWestInBytes15mEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPWestInBytes15mIndex } ::= { pmTcaLspPWestInBytes15mTable 1 } PMTcaLspPWestInBytes15mEntry ::= SEQUENCE { pmTcaLspPWestInBytes15mIndex Integer32, pmTcaLspPWestInBytes15mId OCTET STRING, pmTcaLspPWestInBytes15mUnitType INTEGER, pmTcaLspPWestInBytes15mCnt Counter64, pmTcaLspPWestInBytes15mThreshold Counter64, pmTcaLspPWestInBytes15mOccurTime DateAndTime } pmTcaLspPWestInBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInBytes15mEntry 1 } pmTcaLspPWestInBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInBytes15mEntry 2 } pmTcaLspPWestInBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInBytes15mEntry 3 } pmTcaLspPWestInBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes15mEntry 4 } pmTcaLspPWestInBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes15mEntry 5 } pmTcaLspPWestInBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInBytes15mEntry 6 } pmTcaLspPWestInBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 17 } pmTcaLspPWestInBytes1hEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of lsp-p information of all units." INDEX { pmTcaLspPWestInBytes1hIndex } ::= { pmTcaLspPWestInBytes1hTable 1 } PMTcaLspPWestInBytes1hEntry ::= SEQUENCE { pmTcaLspPWestInBytes1hIndex Integer32, pmTcaLspPWestInBytes1hId OCTET STRING, pmTcaLspPWestInBytes1hUnitType INTEGER, pmTcaLspPWestInBytes1hCnt Counter64, pmTcaLspPWestInBytes1hThreshold Counter64, pmTcaLspPWestInBytes1hOccurTime DateAndTime } pmTcaLspPWestInBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInBytes1hEntry 1 } pmTcaLspPWestInBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInBytes1hEntry 2 } pmTcaLspPWestInBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInBytes1hEntry 3 } pmTcaLspPWestInBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes1hEntry 4 } pmTcaLspPWestInBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes1hEntry 5 } pmTcaLspPWestInBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInBytes1hEntry 6 } pmTcaLspPWestInBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaLspPWestInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains lsp-p information of all units." ::= { pmLspP 18 } pmTcaLspPWestInBytes1dEntry OBJECT-TYPE SYNTAX PMTcaLspPWestInBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature lsp-p of all units." INDEX { pmTcaLspPWestInBytes1dIndex } ::= { pmTcaLspPWestInBytes1dTable 1 } PMTcaLspPWestInBytes1dEntry ::= SEQUENCE { pmTcaLspPWestInBytes1dIndex Integer32, pmTcaLspPWestInBytes1dId OCTET STRING, pmTcaLspPWestInBytes1dUnitType INTEGER, pmTcaLspPWestInBytes1dCnt Counter64, pmTcaLspPWestInBytes1dThreshold Counter64, pmTcaLspPWestInBytes1dOccurTime DateAndTime } pmTcaLspPWestInBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaLspPWestInBytes1dEntry 1 } pmTcaLspPWestInBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Lsp-p name." ::= { pmTcaLspPWestInBytes1dEntry 2 } pmTcaLspPWestInBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaLspPWestInBytes1dEntry 3 } pmTcaLspPWestInBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes1dEntry 4 } pmTcaLspPWestInBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of lsp-p west ingress bytes." ::= { pmTcaLspPWestInBytes1dEntry 5 } pmTcaLspPWestInBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaLspPWestInBytes1dEntry 6 } pmVpws OBJECT IDENTIFIER ::= { pm 105 } pmVpwsCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 1 } pmVpwsCurr15mEntry OBJECT-TYPE SYNTAX PMVpwsCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsCurr15mIndex } ::= { pmVpwsCurr15mTable 1 } PMVpwsCurr15mEntry ::= SEQUENCE { pmVpwsCurr15mIndex Integer32, pmVpwsCurr15mId OCTET STRING, pmVpwsCurr15mUnitType INTEGER, pmVpwsCurr15mIngressPkts Counter64, pmVpwsCurr15mIngressBytes Counter64, pmVpwsCurr15mEgressPkts Counter64, pmVpwsCurr15mEgressBytes Counter64, pmVpwsCurr15mStartTime DateAndTime, pmVpwsCurr15mStopTime DateAndTime } pmVpwsCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsCurr15mEntry 1 } pmVpwsCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsCurr15mEntry 2 } pmVpwsCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsCurr15mEntry 3 } pmVpwsCurr15mIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpws ingress packets." ::= { pmVpwsCurr15mEntry 4 } pmVpwsCurr15mIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpws ingress bytes." ::= { pmVpwsCurr15mEntry 5 } pmVpwsCurr15mEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpws egress packets." ::= { pmVpwsCurr15mEntry 6 } pmVpwsCurr15mEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpws egress bytes." ::= { pmVpwsCurr15mEntry 7 } pmVpwsCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmVpwsCurr15mEntry 100 } pmVpwsCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmVpwsCurr15mEntry 101 } pmVpwsPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 2 } pmVpwsPrev15mEntry OBJECT-TYPE SYNTAX PMVpwsPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsPrev15mIndex } ::= { pmVpwsPrev15mTable 1 } PMVpwsPrev15mEntry ::= SEQUENCE { pmVpwsPrev15mIndex Integer32, pmVpwsPrev15mId OCTET STRING, pmVpwsPrev15mUnitType INTEGER, pmVpwsPrev15mIngressPkts Counter64, pmVpwsPrev15mIngressBytes Counter64, pmVpwsPrev15mEgressPkts Counter64, pmVpwsPrev15mEgressBytes Counter64, pmVpwsPrev15mStartTime DateAndTime, pmVpwsPrev15mStopTime DateAndTime } pmVpwsPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsPrev15mEntry 1 } pmVpwsPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsPrev15mEntry 2 } pmVpwsPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsPrev15mEntry 3 } pmVpwsPrev15mIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpws ingress packets." ::= { pmVpwsPrev15mEntry 4 } pmVpwsPrev15mIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpws ingress bytes." ::= { pmVpwsPrev15mEntry 5 } pmVpwsPrev15mEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpws egress packets." ::= { pmVpwsPrev15mEntry 6 } pmVpwsPrev15mEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpws egress bytes." ::= { pmVpwsPrev15mEntry 7 } pmVpwsPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmVpwsPrev15mEntry 100 } pmVpwsPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmVpwsPrev15mEntry 101 } pmVpwsCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 3 } pmVpwsCurr1hEntry OBJECT-TYPE SYNTAX PMVpwsCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsCurr1hIndex } ::= { pmVpwsCurr1hTable 1 } PMVpwsCurr1hEntry ::= SEQUENCE { pmVpwsCurr1hIndex Integer32, pmVpwsCurr1hId OCTET STRING, pmVpwsCurr1hUnitType INTEGER, pmVpwsCurr1hIngressPkts Counter64, pmVpwsCurr1hIngressBytes Counter64, pmVpwsCurr1hEgressPkts Counter64, pmVpwsCurr1hEgressBytes Counter64, pmVpwsCurr1hStartTime DateAndTime, pmVpwsCurr1hStopTime DateAndTime } pmVpwsCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsCurr1hEntry 1 } pmVpwsCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsCurr1hEntry 2 } pmVpwsCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsCurr1hEntry 3 } pmVpwsCurr1hIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpws ingress packets." ::= { pmVpwsCurr1hEntry 4 } pmVpwsCurr1hIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpws ingress bytes." ::= { pmVpwsCurr1hEntry 5 } pmVpwsCurr1hEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpws egress packets." ::= { pmVpwsCurr1hEntry 6 } pmVpwsCurr1hEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpws egress bytes." ::= { pmVpwsCurr1hEntry 7 } pmVpwsCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmVpwsCurr1hEntry 100 } pmVpwsCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmVpwsCurr1hEntry 101 } pmVpwsPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 4 } pmVpwsPrev1hEntry OBJECT-TYPE SYNTAX PMVpwsPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsPrev1hIndex } ::= { pmVpwsPrev1hTable 1 } PMVpwsPrev1hEntry ::= SEQUENCE { pmVpwsPrev1hIndex Integer32, pmVpwsPrev1hId OCTET STRING, pmVpwsPrev1hUnitType INTEGER, pmVpwsPrev1hIngressPkts Counter64, pmVpwsPrev1hIngressBytes Counter64, pmVpwsPrev1hEgressPkts Counter64, pmVpwsPrev1hEgressBytes Counter64, pmVpwsPrev1hStartTime DateAndTime, pmVpwsPrev1hStopTime DateAndTime } pmVpwsPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsPrev1hEntry 1 } pmVpwsPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsPrev1hEntry 2 } pmVpwsPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsPrev1hEntry 3 } pmVpwsPrev1hIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpws ingress packets." ::= { pmVpwsPrev1hEntry 4 } pmVpwsPrev1hIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpws ingress bytes." ::= { pmVpwsPrev1hEntry 5 } pmVpwsPrev1hEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpws egress packets." ::= { pmVpwsPrev1hEntry 6 } pmVpwsPrev1hEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpws egress bytes." ::= { pmVpwsPrev1hEntry 7 } pmVpwsPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmVpwsPrev1hEntry 100 } pmVpwsPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmVpwsPrev1hEntry 101 } pmVpwsCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 5 } pmVpwsCurr1dEntry OBJECT-TYPE SYNTAX PMVpwsCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsCurr1dIndex } ::= { pmVpwsCurr1dTable 1 } PMVpwsCurr1dEntry ::= SEQUENCE { pmVpwsCurr1dIndex Integer32, pmVpwsCurr1dId OCTET STRING, pmVpwsCurr1dUnitType INTEGER, pmVpwsCurr1dIngressPkts Counter64, pmVpwsCurr1dIngressBytes Counter64, pmVpwsCurr1dEgressPkts Counter64, pmVpwsCurr1dEgressBytes Counter64, pmVpwsCurr1dStartTime DateAndTime, pmVpwsCurr1dStopTime DateAndTime } pmVpwsCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsCurr1dEntry 1 } pmVpwsCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsCurr1dEntry 2 } pmVpwsCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsCurr1dEntry 3 } pmVpwsCurr1dIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpws ingress packets." ::= { pmVpwsCurr1dEntry 4 } pmVpwsCurr1dIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpws ingress bytes." ::= { pmVpwsCurr1dEntry 5 } pmVpwsCurr1dEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpws egress packets." ::= { pmVpwsCurr1dEntry 6 } pmVpwsCurr1dEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpws egress bytes." ::= { pmVpwsCurr1dEntry 7 } pmVpwsCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmVpwsCurr1dEntry 100 } pmVpwsCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmVpwsCurr1dEntry 101 } pmVpwsPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVpwsPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 6 } pmVpwsPrev1dEntry OBJECT-TYPE SYNTAX PMVpwsPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmVpwsPrev1dIndex } ::= { pmVpwsPrev1dTable 1 } PMVpwsPrev1dEntry ::= SEQUENCE { pmVpwsPrev1dIndex Integer32, pmVpwsPrev1dId OCTET STRING, pmVpwsPrev1dUnitType INTEGER, pmVpwsPrev1dIngressPkts Counter64, pmVpwsPrev1dIngressBytes Counter64, pmVpwsPrev1dEgressPkts Counter64, pmVpwsPrev1dEgressBytes Counter64, pmVpwsPrev1dStartTime DateAndTime, pmVpwsPrev1dStopTime DateAndTime } pmVpwsPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVpwsPrev1dEntry 1 } pmVpwsPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmVpwsPrev1dEntry 2 } pmVpwsPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVpwsPrev1dEntry 3 } pmVpwsPrev1dIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpws ingress packets." ::= { pmVpwsPrev1dEntry 4 } pmVpwsPrev1dIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpws ingress bytes." ::= { pmVpwsPrev1dEntry 5 } pmVpwsPrev1dEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpws egress packets." ::= { pmVpwsPrev1dEntry 6 } pmVpwsPrev1dEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpws egress bytes." ::= { pmVpwsPrev1dEntry 7 } pmVpwsPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day start time." ::= { pmVpwsPrev1dEntry 100 } pmVpwsPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day stop time." ::= { pmVpwsPrev1dEntry 101 } pmTcaVpwsIngressPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 7 } pmTcaVpwsIngressPkts15mEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressPkts15mIndex } ::= { pmTcaVpwsIngressPkts15mTable 1 } PMTcaVpwsIngressPkts15mEntry ::= SEQUENCE { pmTcaVpwsIngressPkts15mIndex Integer32, pmTcaVpwsIngressPkts15mId OCTET STRING, pmTcaVpwsIngressPkts15mUnitType INTEGER, pmTcaVpwsIngressPkts15mCnt Counter64, pmTcaVpwsIngressPkts15mThreshold Counter64, pmTcaVpwsIngressPkts15mOccurTime DateAndTime } pmTcaVpwsIngressPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressPkts15mEntry 1 } pmTcaVpwsIngressPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressPkts15mEntry 2 } pmTcaVpwsIngressPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressPkts15mEntry 3 } pmTcaVpwsIngressPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpws ingress packets." ::= { pmTcaVpwsIngressPkts15mEntry 4 } pmTcaVpwsIngressPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpws ingress packets." ::= { pmTcaVpwsIngressPkts15mEntry 5 } pmTcaVpwsIngressPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressPkts15mEntry 6 } pmTcaVpwsIngressPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 8 } pmTcaVpwsIngressPkts1hEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressPkts1hIndex } ::= { pmTcaVpwsIngressPkts1hTable 1 } PMTcaVpwsIngressPkts1hEntry ::= SEQUENCE { pmTcaVpwsIngressPkts1hIndex Integer32, pmTcaVpwsIngressPkts1hId OCTET STRING, pmTcaVpwsIngressPkts1hUnitType INTEGER, pmTcaVpwsIngressPkts1hCnt Counter64, pmTcaVpwsIngressPkts1hThreshold Counter64, pmTcaVpwsIngressPkts1hOccurTime DateAndTime } pmTcaVpwsIngressPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressPkts1hEntry 1 } pmTcaVpwsIngressPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressPkts1hEntry 2 } pmTcaVpwsIngressPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressPkts1hEntry 3 } pmTcaVpwsIngressPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpws ingress packets." ::= { pmTcaVpwsIngressPkts1hEntry 4 } pmTcaVpwsIngressPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpws ingress packets." ::= { pmTcaVpwsIngressPkts1hEntry 5 } pmTcaVpwsIngressPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressPkts1hEntry 6 } pmTcaVpwsIngressPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 9 } pmTcaVpwsIngressPkts1dEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressPkts1dIndex } ::= { pmTcaVpwsIngressPkts1dTable 1 } PMTcaVpwsIngressPkts1dEntry ::= SEQUENCE { pmTcaVpwsIngressPkts1dIndex Integer32, pmTcaVpwsIngressPkts1dId OCTET STRING, pmTcaVpwsIngressPkts1dUnitType INTEGER, pmTcaVpwsIngressPkts1dCnt Counter64, pmTcaVpwsIngressPkts1dThreshold Counter64, pmTcaVpwsIngressPkts1dOccurTime DateAndTime } pmTcaVpwsIngressPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressPkts1dEntry 1 } pmTcaVpwsIngressPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressPkts1dEntry 2 } pmTcaVpwsIngressPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressPkts1dEntry 3 } pmTcaVpwsIngressPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpws ingress packets." ::= { pmTcaVpwsIngressPkts1dEntry 4 } pmTcaVpwsIngressPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpws ingress packets." ::= { pmTcaVpwsIngressPkts1dEntry 5 } pmTcaVpwsIngressPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressPkts1dEntry 6 } pmTcaVpwsIngressBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 10 } pmTcaVpwsIngressBytes15mEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressBytes15mIndex } ::= { pmTcaVpwsIngressBytes15mTable 1 } PMTcaVpwsIngressBytes15mEntry ::= SEQUENCE { pmTcaVpwsIngressBytes15mIndex Integer32, pmTcaVpwsIngressBytes15mId OCTET STRING, pmTcaVpwsIngressBytes15mUnitType INTEGER, pmTcaVpwsIngressBytes15mCnt Counter64, pmTcaVpwsIngressBytes15mThreshold Counter64, pmTcaVpwsIngressBytes15mOccurTime DateAndTime } pmTcaVpwsIngressBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressBytes15mEntry 1 } pmTcaVpwsIngressBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressBytes15mEntry 2 } pmTcaVpwsIngressBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressBytes15mEntry 3 } pmTcaVpwsIngressBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes15mEntry 4 } pmTcaVpwsIngressBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes15mEntry 5 } pmTcaVpwsIngressBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressBytes15mEntry 6 } pmTcaVpwsIngressBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 11 } pmTcaVpwsIngressBytes1hEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressBytes1hIndex } ::= { pmTcaVpwsIngressBytes1hTable 1 } PMTcaVpwsIngressBytes1hEntry ::= SEQUENCE { pmTcaVpwsIngressBytes1hIndex Integer32, pmTcaVpwsIngressBytes1hId OCTET STRING, pmTcaVpwsIngressBytes1hUnitType INTEGER, pmTcaVpwsIngressBytes1hCnt Counter64, pmTcaVpwsIngressBytes1hThreshold Counter64, pmTcaVpwsIngressBytes1hOccurTime DateAndTime } pmTcaVpwsIngressBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressBytes1hEntry 1 } pmTcaVpwsIngressBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressBytes1hEntry 2 } pmTcaVpwsIngressBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressBytes1hEntry 3 } pmTcaVpwsIngressBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes1hEntry 4 } pmTcaVpwsIngressBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes1hEntry 5 } pmTcaVpwsIngressBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressBytes1hEntry 6 } pmTcaVpwsIngressBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 12 } pmTcaVpwsIngressBytes1dEntry OBJECT-TYPE SYNTAX PMTcaVpwsIngressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsIngressBytes1dIndex } ::= { pmTcaVpwsIngressBytes1dTable 1 } PMTcaVpwsIngressBytes1dEntry ::= SEQUENCE { pmTcaVpwsIngressBytes1dIndex Integer32, pmTcaVpwsIngressBytes1dId OCTET STRING, pmTcaVpwsIngressBytes1dUnitType INTEGER, pmTcaVpwsIngressBytes1dCnt Counter64, pmTcaVpwsIngressBytes1dThreshold Counter64, pmTcaVpwsIngressBytes1dOccurTime DateAndTime } pmTcaVpwsIngressBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsIngressBytes1dEntry 1 } pmTcaVpwsIngressBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsIngressBytes1dEntry 2 } pmTcaVpwsIngressBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsIngressBytes1dEntry 3 } pmTcaVpwsIngressBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes1dEntry 4 } pmTcaVpwsIngressBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpws ingress bytes." ::= { pmTcaVpwsIngressBytes1dEntry 5 } pmTcaVpwsIngressBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsIngressBytes1dEntry 6 } pmTcaVpwsEgressPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 13 } pmTcaVpwsEgressPkts15mEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressPkts15mIndex } ::= { pmTcaVpwsEgressPkts15mTable 1 } PMTcaVpwsEgressPkts15mEntry ::= SEQUENCE { pmTcaVpwsEgressPkts15mIndex Integer32, pmTcaVpwsEgressPkts15mId OCTET STRING, pmTcaVpwsEgressPkts15mUnitType INTEGER, pmTcaVpwsEgressPkts15mCnt Counter64, pmTcaVpwsEgressPkts15mThreshold Counter64, pmTcaVpwsEgressPkts15mOccurTime DateAndTime } pmTcaVpwsEgressPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressPkts15mEntry 1 } pmTcaVpwsEgressPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressPkts15mEntry 2 } pmTcaVpwsEgressPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressPkts15mEntry 3 } pmTcaVpwsEgressPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpws egress packets." ::= { pmTcaVpwsEgressPkts15mEntry 4 } pmTcaVpwsEgressPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpws egress packets." ::= { pmTcaVpwsEgressPkts15mEntry 5 } pmTcaVpwsEgressPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressPkts15mEntry 6 } pmTcaVpwsEgressPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 14 } pmTcaVpwsEgressPkts1hEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressPkts1hIndex } ::= { pmTcaVpwsEgressPkts1hTable 1 } PMTcaVpwsEgressPkts1hEntry ::= SEQUENCE { pmTcaVpwsEgressPkts1hIndex Integer32, pmTcaVpwsEgressPkts1hId OCTET STRING, pmTcaVpwsEgressPkts1hUnitType INTEGER, pmTcaVpwsEgressPkts1hCnt Counter64, pmTcaVpwsEgressPkts1hThreshold Counter64, pmTcaVpwsEgressPkts1hOccurTime DateAndTime } pmTcaVpwsEgressPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressPkts1hEntry 1 } pmTcaVpwsEgressPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressPkts1hEntry 2 } pmTcaVpwsEgressPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressPkts1hEntry 3 } pmTcaVpwsEgressPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpws egress packets." ::= { pmTcaVpwsEgressPkts1hEntry 4 } pmTcaVpwsEgressPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpws egress packets." ::= { pmTcaVpwsEgressPkts1hEntry 5 } pmTcaVpwsEgressPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressPkts1hEntry 6 } pmTcaVpwsEgressPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 15 } pmTcaVpwsEgressPkts1dEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressPkts1dIndex } ::= { pmTcaVpwsEgressPkts1dTable 1 } PMTcaVpwsEgressPkts1dEntry ::= SEQUENCE { pmTcaVpwsEgressPkts1dIndex Integer32, pmTcaVpwsEgressPkts1dId OCTET STRING, pmTcaVpwsEgressPkts1dUnitType INTEGER, pmTcaVpwsEgressPkts1dCnt Counter64, pmTcaVpwsEgressPkts1dThreshold Counter64, pmTcaVpwsEgressPkts1dOccurTime DateAndTime } pmTcaVpwsEgressPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressPkts1dEntry 1 } pmTcaVpwsEgressPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressPkts1dEntry 2 } pmTcaVpwsEgressPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressPkts1dEntry 3 } pmTcaVpwsEgressPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpws egress packets." ::= { pmTcaVpwsEgressPkts1dEntry 4 } pmTcaVpwsEgressPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpws egress packets." ::= { pmTcaVpwsEgressPkts1dEntry 5 } pmTcaVpwsEgressPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressPkts1dEntry 6 } pmTcaVpwsEgressBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 16 } pmTcaVpwsEgressBytes15mEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressBytes15mIndex } ::= { pmTcaVpwsEgressBytes15mTable 1 } PMTcaVpwsEgressBytes15mEntry ::= SEQUENCE { pmTcaVpwsEgressBytes15mIndex Integer32, pmTcaVpwsEgressBytes15mId OCTET STRING, pmTcaVpwsEgressBytes15mUnitType INTEGER, pmTcaVpwsEgressBytes15mCnt Counter64, pmTcaVpwsEgressBytes15mThreshold Counter64, pmTcaVpwsEgressBytes15mOccurTime DateAndTime } pmTcaVpwsEgressBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressBytes15mEntry 1 } pmTcaVpwsEgressBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressBytes15mEntry 2 } pmTcaVpwsEgressBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressBytes15mEntry 3 } pmTcaVpwsEgressBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpws egress bytes." ::= { pmTcaVpwsEgressBytes15mEntry 4 } pmTcaVpwsEgressBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpws egress bytes." ::= { pmTcaVpwsEgressBytes15mEntry 5 } pmTcaVpwsEgressBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressBytes15mEntry 6 } pmTcaVpwsEgressBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 17 } pmTcaVpwsEgressBytes1hEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressBytes1hIndex } ::= { pmTcaVpwsEgressBytes1hTable 1 } PMTcaVpwsEgressBytes1hEntry ::= SEQUENCE { pmTcaVpwsEgressBytes1hIndex Integer32, pmTcaVpwsEgressBytes1hId OCTET STRING, pmTcaVpwsEgressBytes1hUnitType INTEGER, pmTcaVpwsEgressBytes1hCnt Counter64, pmTcaVpwsEgressBytes1hThreshold Counter64, pmTcaVpwsEgressBytes1hOccurTime DateAndTime } pmTcaVpwsEgressBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressBytes1hEntry 1 } pmTcaVpwsEgressBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressBytes1hEntry 2 } pmTcaVpwsEgressBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressBytes1hEntry 3 } pmTcaVpwsEgressBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpws egress bytes." ::= { pmTcaVpwsEgressBytes1hEntry 4 } pmTcaVpwsEgressBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpws egress bytes." ::= { pmTcaVpwsEgressBytes1hEntry 5 } pmTcaVpwsEgressBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressBytes1hEntry 6 } pmTcaVpwsEgressBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpws information of all units." ::= { pmVpws 18 } pmTcaVpwsEgressBytes1dEntry OBJECT-TYPE SYNTAX PMTcaVpwsEgressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpws information of all units." INDEX { pmTcaVpwsEgressBytes1dIndex } ::= { pmTcaVpwsEgressBytes1dTable 1 } PMTcaVpwsEgressBytes1dEntry ::= SEQUENCE { pmTcaVpwsEgressBytes1dIndex Integer32, pmTcaVpwsEgressBytes1dId OCTET STRING, pmTcaVpwsEgressBytes1dUnitType INTEGER, pmTcaVpwsEgressBytes1dCnt Counter64, pmTcaVpwsEgressBytes1dThreshold Counter64, pmTcaVpwsEgressBytes1dOccurTime DateAndTime } pmTcaVpwsEgressBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVpwsEgressBytes1dEntry 1 } pmTcaVpwsEgressBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpws name." ::= { pmTcaVpwsEgressBytes1dEntry 2 } pmTcaVpwsEgressBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVpwsEgressBytes1dEntry 3 } pmTcaVpwsEgressBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpws egress bytes." ::= { pmTcaVpwsEgressBytes1dEntry 4 } pmTcaVpwsEgressBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpws egress bytes." ::= { pmTcaVpwsEgressBytes1dEntry 5 } pmTcaVpwsEgressBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVpwsEgressBytes1dEntry 6 } pmVpls OBJECT IDENTIFIER ::= { pm 106 } pmVplsCurr15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 1 } pmVplsCurr15mEntry OBJECT-TYPE SYNTAX PMVplsCurr15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsCurr15mIndex } ::= { pmVplsCurr15mTable 1 } PMVplsCurr15mEntry ::= SEQUENCE { pmVplsCurr15mIndex Integer32, pmVplsCurr15mId OCTET STRING, pmVplsCurr15mUnitType INTEGER, pmVplsCurr15mIngressPkts Counter64, pmVplsCurr15mIngressBytes Counter64, pmVplsCurr15mEgressPkts Counter64, pmVplsCurr15mEgressBytes Counter64, pmVplsCurr15mStartTime DateAndTime, pmVplsCurr15mStopTime DateAndTime } pmVplsCurr15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsCurr15mEntry 1 } pmVplsCurr15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsCurr15mEntry 2 } pmVplsCurr15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsCurr15mEntry 3 } pmVplsCurr15mIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpls ingress packets." ::= { pmVplsCurr15mEntry 4 } pmVplsCurr15mIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpls ingress bytes." ::= { pmVplsCurr15mEntry 5 } pmVplsCurr15mEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpls egress packets." ::= { pmVplsCurr15mEntry 6 } pmVplsCurr15mEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min counter of vpls egress bytes." ::= { pmVplsCurr15mEntry 7 } pmVplsCurr15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min start time." ::= { pmVplsCurr15mEntry 100 } pmVplsCurr15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 15min stop time." ::= { pmVplsCurr15mEntry 101 } pmVplsPrev15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 2 } pmVplsPrev15mEntry OBJECT-TYPE SYNTAX PMVplsPrev15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsPrev15mIndex } ::= { pmVplsPrev15mTable 1 } PMVplsPrev15mEntry ::= SEQUENCE { pmVplsPrev15mIndex Integer32, pmVplsPrev15mId OCTET STRING, pmVplsPrev15mUnitType INTEGER, pmVplsPrev15mIngressPkts Counter64, pmVplsPrev15mIngressBytes Counter64, pmVplsPrev15mEgressPkts Counter64, pmVplsPrev15mEgressBytes Counter64, pmVplsPrev15mStartTime DateAndTime, pmVplsPrev15mStopTime DateAndTime } pmVplsPrev15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsPrev15mEntry 1 } pmVplsPrev15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsPrev15mEntry 2 } pmVplsPrev15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsPrev15mEntry 3 } pmVplsPrev15mIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpls ingress packets." ::= { pmVplsPrev15mEntry 4 } pmVplsPrev15mIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpls ingress bytes." ::= { pmVplsPrev15mEntry 5 } pmVplsPrev15mEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpls egress packets." ::= { pmVplsPrev15mEntry 6 } pmVplsPrev15mEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min counter of vpls egress bytes." ::= { pmVplsPrev15mEntry 7 } pmVplsPrev15mStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min start time." ::= { pmVplsPrev15mEntry 100 } pmVplsPrev15mStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 15min stop time." ::= { pmVplsPrev15mEntry 101 } pmVplsCurr1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 3 } pmVplsCurr1hEntry OBJECT-TYPE SYNTAX PMVplsCurr1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsCurr1hIndex } ::= { pmVplsCurr1hTable 1 } PMVplsCurr1hEntry ::= SEQUENCE { pmVplsCurr1hIndex Integer32, pmVplsCurr1hId OCTET STRING, pmVplsCurr1hUnitType INTEGER, pmVplsCurr1hIngressPkts Counter64, pmVplsCurr1hIngressBytes Counter64, pmVplsCurr1hEgressPkts Counter64, pmVplsCurr1hEgressBytes Counter64, pmVplsCurr1hStartTime DateAndTime, pmVplsCurr1hStopTime DateAndTime } pmVplsCurr1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsCurr1hEntry 1 } pmVplsCurr1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsCurr1hEntry 2 } pmVplsCurr1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsCurr1hEntry 3 } pmVplsCurr1hIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpls ingress packets." ::= { pmVplsCurr1hEntry 4 } pmVplsCurr1hIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpls ingress bytes." ::= { pmVplsCurr1hEntry 5 } pmVplsCurr1hEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpls egress packets." ::= { pmVplsCurr1hEntry 6 } pmVplsCurr1hEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour counter of vpls egress bytes." ::= { pmVplsCurr1hEntry 7 } pmVplsCurr1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour start time." ::= { pmVplsCurr1hEntry 100 } pmVplsCurr1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1hour stop time." ::= { pmVplsCurr1hEntry 101 } pmVplsPrev1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 4 } pmVplsPrev1hEntry OBJECT-TYPE SYNTAX PMVplsPrev1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsPrev1hIndex } ::= { pmVplsPrev1hTable 1 } PMVplsPrev1hEntry ::= SEQUENCE { pmVplsPrev1hIndex Integer32, pmVplsPrev1hId OCTET STRING, pmVplsPrev1hUnitType INTEGER, pmVplsPrev1hIngressPkts Counter64, pmVplsPrev1hIngressBytes Counter64, pmVplsPrev1hEgressPkts Counter64, pmVplsPrev1hEgressBytes Counter64, pmVplsPrev1hStartTime DateAndTime, pmVplsPrev1hStopTime DateAndTime } pmVplsPrev1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsPrev1hEntry 1 } pmVplsPrev1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsPrev1hEntry 2 } pmVplsPrev1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsPrev1hEntry 3 } pmVplsPrev1hIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpls ingress packets." ::= { pmVplsPrev1hEntry 4 } pmVplsPrev1hIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpls ingress bytes." ::= { pmVplsPrev1hEntry 5 } pmVplsPrev1hEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpls egress packets." ::= { pmVplsPrev1hEntry 6 } pmVplsPrev1hEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour counter of vpls egress bytes." ::= { pmVplsPrev1hEntry 7 } pmVplsPrev1hStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour start time." ::= { pmVplsPrev1hEntry 100 } pmVplsPrev1hStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1hour stop time." ::= { pmVplsPrev1hEntry 101 } pmVplsCurr1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 5 } pmVplsCurr1dEntry OBJECT-TYPE SYNTAX PMVplsCurr1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsCurr1dIndex } ::= { pmVplsCurr1dTable 1 } PMVplsCurr1dEntry ::= SEQUENCE { pmVplsCurr1dIndex Integer32, pmVplsCurr1dId OCTET STRING, pmVplsCurr1dUnitType INTEGER, pmVplsCurr1dIngressPkts Counter64, pmVplsCurr1dIngressBytes Counter64, pmVplsCurr1dEgressPkts Counter64, pmVplsCurr1dEgressBytes Counter64, pmVplsCurr1dStartTime DateAndTime, pmVplsCurr1dStopTime DateAndTime } pmVplsCurr1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsCurr1dEntry 1 } pmVplsCurr1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsCurr1dEntry 2 } pmVplsCurr1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsCurr1dEntry 3 } pmVplsCurr1dIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpls ingress packets." ::= { pmVplsCurr1dEntry 4 } pmVplsCurr1dIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpls ingress bytes." ::= { pmVplsCurr1dEntry 5 } pmVplsCurr1dEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpls egress packets." ::= { pmVplsCurr1dEntry 6 } pmVplsCurr1dEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day counter of vpls egress bytes." ::= { pmVplsCurr1dEntry 7 } pmVplsCurr1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day start time." ::= { pmVplsCurr1dEntry 100 } pmVplsCurr1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Current 1day stop time." ::= { pmVplsCurr1dEntry 101 } pmVplsPrev1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMVplsPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 6 } pmVplsPrev1dEntry OBJECT-TYPE SYNTAX PMVplsPrev1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmVplsPrev1dIndex } ::= { pmVplsPrev1dTable 1 } PMVplsPrev1dEntry ::= SEQUENCE { pmVplsPrev1dIndex Integer32, pmVplsPrev1dId OCTET STRING, pmVplsPrev1dUnitType INTEGER, pmVplsPrev1dIngressPkts Counter64, pmVplsPrev1dIngressBytes Counter64, pmVplsPrev1dEgressPkts Counter64, pmVplsPrev1dEgressBytes Counter64, pmVplsPrev1dStartTime DateAndTime, pmVplsPrev1dStopTime DateAndTime } pmVplsPrev1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmVplsPrev1dEntry 1 } pmVplsPrev1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Vpls name." ::= { pmVplsPrev1dEntry 2 } pmVplsPrev1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmVplsPrev1dEntry 3 } pmVplsPrev1dIngressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpls ingress packets." ::= { pmVplsPrev1dEntry 4 } pmVplsPrev1dIngressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpls ingress bytes." ::= { pmVplsPrev1dEntry 5 } pmVplsPrev1dEgressPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpls egress packets." ::= { pmVplsPrev1dEntry 6 } pmVplsPrev1dEgressBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day counter of vpls egress bytes." ::= { pmVplsPrev1dEntry 7 } pmVplsPrev1dStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day start time." ::= { pmVplsPrev1dEntry 100 } pmVplsPrev1dStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Previous 1day stop time." ::= { pmVplsPrev1dEntry 101 } pmTcaVplsIngressPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 7 } pmTcaVplsIngressPkts15mEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressPkts15mIndex } ::= { pmTcaVplsIngressPkts15mTable 1 } PMTcaVplsIngressPkts15mEntry ::= SEQUENCE { pmTcaVplsIngressPkts15mIndex Integer32, pmTcaVplsIngressPkts15mId OCTET STRING, pmTcaVplsIngressPkts15mUnitType INTEGER, pmTcaVplsIngressPkts15mCnt Counter64, pmTcaVplsIngressPkts15mThreshold Counter64, pmTcaVplsIngressPkts15mOccurTime DateAndTime } pmTcaVplsIngressPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressPkts15mEntry 1 } pmTcaVplsIngressPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressPkts15mEntry 2 } pmTcaVplsIngressPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressPkts15mEntry 3 } pmTcaVplsIngressPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpls ingress packets." ::= { pmTcaVplsIngressPkts15mEntry 4 } pmTcaVplsIngressPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpls ingress packets." ::= { pmTcaVplsIngressPkts15mEntry 5 } pmTcaVplsIngressPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressPkts15mEntry 6 } pmTcaVplsIngressPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 8 } pmTcaVplsIngressPkts1hEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressPkts1hIndex } ::= { pmTcaVplsIngressPkts1hTable 1 } PMTcaVplsIngressPkts1hEntry ::= SEQUENCE { pmTcaVplsIngressPkts1hIndex Integer32, pmTcaVplsIngressPkts1hId OCTET STRING, pmTcaVplsIngressPkts1hUnitType INTEGER, pmTcaVplsIngressPkts1hCnt Counter64, pmTcaVplsIngressPkts1hThreshold Counter64, pmTcaVplsIngressPkts1hOccurTime DateAndTime } pmTcaVplsIngressPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressPkts1hEntry 1 } pmTcaVplsIngressPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressPkts1hEntry 2 } pmTcaVplsIngressPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressPkts1hEntry 3 } pmTcaVplsIngressPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpls ingress packets." ::= { pmTcaVplsIngressPkts1hEntry 4 } pmTcaVplsIngressPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpls ingress packets." ::= { pmTcaVplsIngressPkts1hEntry 5 } pmTcaVplsIngressPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressPkts1hEntry 6 } pmTcaVplsIngressPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 9 } pmTcaVplsIngressPkts1dEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressPkts1dIndex } ::= { pmTcaVplsIngressPkts1dTable 1 } PMTcaVplsIngressPkts1dEntry ::= SEQUENCE { pmTcaVplsIngressPkts1dIndex Integer32, pmTcaVplsIngressPkts1dId OCTET STRING, pmTcaVplsIngressPkts1dUnitType INTEGER, pmTcaVplsIngressPkts1dCnt Counter64, pmTcaVplsIngressPkts1dThreshold Counter64, pmTcaVplsIngressPkts1dOccurTime DateAndTime } pmTcaVplsIngressPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressPkts1dEntry 1 } pmTcaVplsIngressPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressPkts1dEntry 2 } pmTcaVplsIngressPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressPkts1dEntry 3 } pmTcaVplsIngressPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpls ingress packets." ::= { pmTcaVplsIngressPkts1dEntry 4 } pmTcaVplsIngressPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpls ingress packets." ::= { pmTcaVplsIngressPkts1dEntry 5 } pmTcaVplsIngressPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressPkts1dEntry 6 } pmTcaVplsIngressBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 10 } pmTcaVplsIngressBytes15mEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressBytes15mIndex } ::= { pmTcaVplsIngressBytes15mTable 1 } PMTcaVplsIngressBytes15mEntry ::= SEQUENCE { pmTcaVplsIngressBytes15mIndex Integer32, pmTcaVplsIngressBytes15mId OCTET STRING, pmTcaVplsIngressBytes15mUnitType INTEGER, pmTcaVplsIngressBytes15mCnt Counter64, pmTcaVplsIngressBytes15mThreshold Counter64, pmTcaVplsIngressBytes15mOccurTime DateAndTime } pmTcaVplsIngressBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressBytes15mEntry 1 } pmTcaVplsIngressBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressBytes15mEntry 2 } pmTcaVplsIngressBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressBytes15mEntry 3 } pmTcaVplsIngressBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpls ingress bytes." ::= { pmTcaVplsIngressBytes15mEntry 4 } pmTcaVplsIngressBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpls ingress bytes." ::= { pmTcaVplsIngressBytes15mEntry 5 } pmTcaVplsIngressBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressBytes15mEntry 6 } pmTcaVplsIngressBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 11 } pmTcaVplsIngressBytes1hEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressBytes1hIndex } ::= { pmTcaVplsIngressBytes1hTable 1 } PMTcaVplsIngressBytes1hEntry ::= SEQUENCE { pmTcaVplsIngressBytes1hIndex Integer32, pmTcaVplsIngressBytes1hId OCTET STRING, pmTcaVplsIngressBytes1hUnitType INTEGER, pmTcaVplsIngressBytes1hCnt Counter64, pmTcaVplsIngressBytes1hThreshold Counter64, pmTcaVplsIngressBytes1hOccurTime DateAndTime } pmTcaVplsIngressBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressBytes1hEntry 1 } pmTcaVplsIngressBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressBytes1hEntry 2 } pmTcaVplsIngressBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressBytes1hEntry 3 } pmTcaVplsIngressBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpls ingress bytes." ::= { pmTcaVplsIngressBytes1hEntry 4 } pmTcaVplsIngressBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpls ingress bytes." ::= { pmTcaVplsIngressBytes1hEntry 5 } pmTcaVplsIngressBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressBytes1hEntry 6 } pmTcaVplsIngressBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsIngressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 12 } pmTcaVplsIngressBytes1dEntry OBJECT-TYPE SYNTAX PMTcaVplsIngressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsIngressBytes1dIndex } ::= { pmTcaVplsIngressBytes1dTable 1 } PMTcaVplsIngressBytes1dEntry ::= SEQUENCE { pmTcaVplsIngressBytes1dIndex Integer32, pmTcaVplsIngressBytes1dId OCTET STRING, pmTcaVplsIngressBytes1dUnitType INTEGER, pmTcaVplsIngressBytes1dCnt Counter64, pmTcaVplsIngressBytes1dThreshold Counter64, pmTcaVplsIngressBytes1dOccurTime DateAndTime } pmTcaVplsIngressBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsIngressBytes1dEntry 1 } pmTcaVplsIngressBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsIngressBytes1dEntry 2 } pmTcaVplsIngressBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsIngressBytes1dEntry 3 } pmTcaVplsIngressBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpls ingress bytes." ::= { pmTcaVplsIngressBytes1dEntry 4 } pmTcaVplsIngressBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpls ingress bytes." ::= { pmTcaVplsIngressBytes1dEntry 5 } pmTcaVplsIngressBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsIngressBytes1dEntry 6 } pmTcaVplsEgressPkts15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 13 } pmTcaVplsEgressPkts15mEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressPkts15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressPkts15mIndex } ::= { pmTcaVplsEgressPkts15mTable 1 } PMTcaVplsEgressPkts15mEntry ::= SEQUENCE { pmTcaVplsEgressPkts15mIndex Integer32, pmTcaVplsEgressPkts15mId OCTET STRING, pmTcaVplsEgressPkts15mUnitType INTEGER, pmTcaVplsEgressPkts15mCnt Counter64, pmTcaVplsEgressPkts15mThreshold Counter64, pmTcaVplsEgressPkts15mOccurTime DateAndTime } pmTcaVplsEgressPkts15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressPkts15mEntry 1 } pmTcaVplsEgressPkts15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressPkts15mEntry 2 } pmTcaVplsEgressPkts15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressPkts15mEntry 3 } pmTcaVplsEgressPkts15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpls egress packets." ::= { pmTcaVplsEgressPkts15mEntry 4 } pmTcaVplsEgressPkts15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpls egress packets." ::= { pmTcaVplsEgressPkts15mEntry 5 } pmTcaVplsEgressPkts15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressPkts15mEntry 6 } pmTcaVplsEgressPkts1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 14 } pmTcaVplsEgressPkts1hEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressPkts1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressPkts1hIndex } ::= { pmTcaVplsEgressPkts1hTable 1 } PMTcaVplsEgressPkts1hEntry ::= SEQUENCE { pmTcaVplsEgressPkts1hIndex Integer32, pmTcaVplsEgressPkts1hId OCTET STRING, pmTcaVplsEgressPkts1hUnitType INTEGER, pmTcaVplsEgressPkts1hCnt Counter64, pmTcaVplsEgressPkts1hThreshold Counter64, pmTcaVplsEgressPkts1hOccurTime DateAndTime } pmTcaVplsEgressPkts1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressPkts1hEntry 1 } pmTcaVplsEgressPkts1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressPkts1hEntry 2 } pmTcaVplsEgressPkts1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressPkts1hEntry 3 } pmTcaVplsEgressPkts1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpls egress packets." ::= { pmTcaVplsEgressPkts1hEntry 4 } pmTcaVplsEgressPkts1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpls egress packets." ::= { pmTcaVplsEgressPkts1hEntry 5 } pmTcaVplsEgressPkts1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressPkts1hEntry 6 } pmTcaVplsEgressPkts1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 15 } pmTcaVplsEgressPkts1dEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressPkts1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressPkts1dIndex } ::= { pmTcaVplsEgressPkts1dTable 1 } PMTcaVplsEgressPkts1dEntry ::= SEQUENCE { pmTcaVplsEgressPkts1dIndex Integer32, pmTcaVplsEgressPkts1dId OCTET STRING, pmTcaVplsEgressPkts1dUnitType INTEGER, pmTcaVplsEgressPkts1dCnt Counter64, pmTcaVplsEgressPkts1dThreshold Counter64, pmTcaVplsEgressPkts1dOccurTime DateAndTime } pmTcaVplsEgressPkts1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressPkts1dEntry 1 } pmTcaVplsEgressPkts1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressPkts1dEntry 2 } pmTcaVplsEgressPkts1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressPkts1dEntry 3 } pmTcaVplsEgressPkts1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpls egress packets." ::= { pmTcaVplsEgressPkts1dEntry 4 } pmTcaVplsEgressPkts1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpls egress packets." ::= { pmTcaVplsEgressPkts1dEntry 5 } pmTcaVplsEgressPkts1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressPkts1dEntry 6 } pmTcaVplsEgressBytes15mTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 16 } pmTcaVplsEgressBytes15mEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressBytes15mEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressBytes15mIndex } ::= { pmTcaVplsEgressBytes15mTable 1 } PMTcaVplsEgressBytes15mEntry ::= SEQUENCE { pmTcaVplsEgressBytes15mIndex Integer32, pmTcaVplsEgressBytes15mId OCTET STRING, pmTcaVplsEgressBytes15mUnitType INTEGER, pmTcaVplsEgressBytes15mCnt Counter64, pmTcaVplsEgressBytes15mThreshold Counter64, pmTcaVplsEgressBytes15mOccurTime DateAndTime } pmTcaVplsEgressBytes15mIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressBytes15mEntry 1 } pmTcaVplsEgressBytes15mId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressBytes15mEntry 2 } pmTcaVplsEgressBytes15mUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressBytes15mEntry 3 } pmTcaVplsEgressBytes15mCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min counter of vpls egress bytes." ::= { pmTcaVplsEgressBytes15mEntry 4 } pmTcaVplsEgressBytes15mThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "15min threshold of vpls egress bytes." ::= { pmTcaVplsEgressBytes15mEntry 5 } pmTcaVplsEgressBytes15mOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressBytes15mEntry 6 } pmTcaVplsEgressBytes1hTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 17 } pmTcaVplsEgressBytes1hEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressBytes1hEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressBytes1hIndex } ::= { pmTcaVplsEgressBytes1hTable 1 } PMTcaVplsEgressBytes1hEntry ::= SEQUENCE { pmTcaVplsEgressBytes1hIndex Integer32, pmTcaVplsEgressBytes1hId OCTET STRING, pmTcaVplsEgressBytes1hUnitType INTEGER, pmTcaVplsEgressBytes1hCnt Counter64, pmTcaVplsEgressBytes1hThreshold Counter64, pmTcaVplsEgressBytes1hOccurTime DateAndTime } pmTcaVplsEgressBytes1hIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressBytes1hEntry 1 } pmTcaVplsEgressBytes1hId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressBytes1hEntry 2 } pmTcaVplsEgressBytes1hUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressBytes1hEntry 3 } pmTcaVplsEgressBytes1hCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour counter of vpls egress bytes." ::= { pmTcaVplsEgressBytes1hEntry 4 } pmTcaVplsEgressBytes1hThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1hour threshold of vpls egress bytes." ::= { pmTcaVplsEgressBytes1hEntry 5 } pmTcaVplsEgressBytes1hOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressBytes1hEntry 6 } pmTcaVplsEgressBytes1dTable OBJECT-TYPE SYNTAX SEQUENCE OF PMTcaVplsEgressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains vpls information of all units." ::= { pmVpls 18 } pmTcaVplsEgressBytes1dEntry OBJECT-TYPE SYNTAX PMTcaVplsEgressBytes1dEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of vpls information of all units." INDEX { pmTcaVplsEgressBytes1dIndex } ::= { pmTcaVplsEgressBytes1dTable 1 } PMTcaVplsEgressBytes1dEntry ::= SEQUENCE { pmTcaVplsEgressBytes1dIndex Integer32, pmTcaVplsEgressBytes1dId OCTET STRING, pmTcaVplsEgressBytes1dUnitType INTEGER, pmTcaVplsEgressBytes1dCnt Counter64, pmTcaVplsEgressBytes1dThreshold Counter64, pmTcaVplsEgressBytes1dOccurTime DateAndTime } pmTcaVplsEgressBytes1dIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of units." ::= { pmTcaVplsEgressBytes1dEntry 1 } pmTcaVplsEgressBytes1dId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { pmTcaVplsEgressBytes1dEntry 2 } pmTcaVplsEgressBytes1dUnitType OBJECT-TYPE SYNTAX INTEGER { mcu(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit type." ::= { pmTcaVplsEgressBytes1dEntry 3 } pmTcaVplsEgressBytes1dCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day counter of vpls egress bytes." ::= { pmTcaVplsEgressBytes1dEntry 4 } pmTcaVplsEgressBytes1dThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "1day threshold of vpls egress bytes." ::= { pmTcaVplsEgressBytes1dEntry 5 } pmTcaVplsEgressBytes1dOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the tca." ::= { pmTcaVplsEgressBytes1dEntry 6 } --alarm OBJECT IDENTIFIER ::= { OID 91 } alarmOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains all alarm information." ::= { alarm 1 } alarmOptionEntry OBJECT-TYPE SYNTAX AlarmOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all alarm information." INDEX { alarmOptionIndex } ::= { alarmOptionTable 1 } AlarmOptionEntry ::= SEQUENCE { alarmOptionIndex INTEGER, alarmOptionSeverity INTEGER, alarmOptionServiceAffect INTEGER } alarmOptionIndex OBJECT-TYPE SYNTAX INTEGER { unit-out(0), sfp-out(1), link-down(2), vpws-down(3), vpls-down(4), lsp-down(5), mspw-down(6), mem-usage-high(7), mpls-tp-oam-loc(8), mpls-tp-oam-unexp-rmepid(9), mpls-tp-oam-unexp-interval(10), mpls-tp-oam-unexp-megid(11), mpls-tp-oam-unexp-level(12), mpls-tp-oam-rdi(13), mpls-tp-oam-rdi-tx(14), mpls-tp-oam-ais-defect(15), mpls-tp-oam-event-full(16), mpls-tp-oam-1dm-full(17), mpls-tp-oam-wait-1st-ccm(18), mpls-tp-oam-ais-rx(19), mpls-tp-oam-ais-tx(20), tca-unit-temperature-min-15min(21), tca-unit-temperature-min-1hour(22), tca-unit-temperature-min-1day(23), tca-unit-temperature-max-15min(24), tca-unit-temperature-max-1hour(25), tca-unit-temperature-max-1day(26), tca-sfp-rx-power-min-15min(27), tca-sfp-rx-power-min-1hour(28), tca-sfp-rx-power-min-1day(29), tca-sfp-rx-power-max-15min(30), tca-sfp-rx-power-max-1hour(31), tca-sfp-rx-power-max-1day(32), tca-sfp-tx-power-min-15min(33), tca-sfp-tx-power-min-1hour(34), tca-sfp-tx-power-min-1day(35), tca-sfp-tx-power-max-15min(36), tca-sfp-tx-power-max-1hourn(37), tca-sfp-tx-power-max-1day(38), tca-if-dropped-events-15min(39), tca-if-dropped-events-1hour(40), tca-if-dropped-events-1day(41), tca-if-input-packets-15min(42), tca-if-input-packets-1hour(43), tca-if-input-packets-1day(44), tca-if-input-bytes-15min(45), tca-if-input-bytes-1hour(46), tca-if-input-bytes-1day(47), tca-if-input-broadcasts-15min(48), tca-if-input-broadcasts-1hour(49), tca-if-input-broadcasts-1day(50), tca-if-input-multicasts-15min(51), tca-if-input-multicasts-1hour(52), tca-if-input-multicasts-1day(53), tca-if-crc-errors-15min(54), tca-if-crc-errors-1hour(55), tca-if-crc-errors-1day(56), tca-if-collisions-15min(57), tca-if-collisions-1hour(58), tca-if-collisions-1day(59), tca-if-undersized-packets-15min(60), tca-if-undersized-packets-1hour(61), tca-if-undersized-packets-1day(62), tca-if-oversized-packets-15min(63), tca-if-oversized-packets-1hour(64), tca-if-oversized-packets-1day(65), tca-if-fragments-15min(66), tca-if-fragments-1hour(67), tca-if-fragments-1day(68), tca-if-jabbers-15min(69), tca-if-jabbers-1hour(70), tca-if-jabbers-1day(71), tca-if-packet-64-15min(72), tca-if-packet-64-1hour(73), tca-if-packet-64-1day(74), tca-if-packet-65-127-15min(75), tca-if-packet-65-127-1hour(76), tca-if-packet-65-127-1day(77), tca-if-packet-128-255-15min(78), tca-if-packet-128-255-1hour(79), tca-if-packet-128-255-1day(80), tca-if-packet-256-511-15min(81), tca-if-packet-256-511-1hour(82), tca-if-packet-256-511-1day(83), tca-if-packet-512-1023-15min(84), tca-if-packet-512-1023-1hour(85), tca-if-packet-512-1023-1day(86), tca-if-packet-1024-15min(87), tca-if-packet-1024-1hour(88), tca-if-packet-1024-1day(89), tca-if-output-packets-15min(90), tca-if-output-packets-1hour(91), tca-if-output-packets-1day(92), tca-if-output-bytes-15min(93), tca-if-output-bytes-1hour(94), tca-if-output-bytes-1day(95), tca-lsp-pe-out-packets-15min(96), tca-lsp-pe-out-packets-1hour(97), tca-lsp-pe-out-packets-1day(98), tca-lsp-pe-out-bytes-15min(99), tca-lsp-pe-out-bytes-1hour(100), tca-lsp-pe-out-bytes-1day(101), tca-lsp-p-east-in-packets-15min(102), tca-lsp-p-east-in-packets-1hour(103), tca-lsp-p-east-in-packets-1day(104), tca-lsp-p-east-in-bytes-15min(105), tca-lsp-p-east-in-bytes-1hour(106), tca-lsp-p-east-in-bytes-1day(107), tca-lsp-p-west-in-packets-15min(108), tca-lsp-p-west-in-packets-1hour(109), tca-lsp-p-west-in-packets-1day(110), tca-lsp-p-west-in-bytes-15min(111), tca-lsp-p-west-in-bytes-1hour(112), tca-lsp-p-west-in-bytes-1day(113), tca-vpws-ingress-packets-15min(114), tca-vpws-ingress-packets-1hour(115), tca-vpws-ingress-packets-1day(116), tca-vpws-ingress-bytes-15min(117), tca-vpws-ingress-bytes-1hour(118), tca-vpws-ingress-bytes-1day(119), tca-vpws-egress-packets-15min(120), tca-vpws-egress-packets-1hour(121), tca-vpws-egress-packets-1day(122), tca-vpws-egress-bytes-15min(123), tca-vpws-egress-bytes-1hour(124), tca-vpws-egress-bytes-1day(125), tca-vpls-ingress-packets-15min(126), tca-vpls-ingress-packets-1hour(127), tca-vpls-ingress-packets-1day(128), tca-vpls-ingress-bytes-15min(129), tca-vpls-ingress-bytes-1hour(130), tca-vpls-ingress-bytes-1day(131), tca-vpls-egress-packets-15min(132), tca-vpls-egress-packets-1hour(133), tca-vpls-egress-packets-1day(134), tca-vpls-egress-bytes-15min(135), tca-vpls-egress-bytes-1hour(136), tca-vpls-egress-bytes-1day(137) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of pm types." ::= { alarmOptionEntry 1 } alarmOptionSeverity OBJECT-TYPE SYNTAX INTEGER { warning(0), minor(1), major(2), critical(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Severity of the alarm." ::= { alarmOptionEntry 2 } alarmOptionServiceAffect OBJECT-TYPE SYNTAX INTEGER { service-affected(0), non-service-affected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Service affted of the alarm." ::= { alarmOptionEntry 3 } alarmLogTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains all current alarms." ::= { alarm 2 } alarmLogEntry OBJECT-TYPE SYNTAX AlarmLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { alarmLogIndex } ::= { alarmLogTable 1 } AlarmLogEntry ::= SEQUENCE { alarmLogIndex Integer32, alarmLogType INTEGER, alarmLogObject OCTET STRING, alarmLogSeverity INTEGER, alarmLogServiceAffect INTEGER, alarmLogAddInfo OCTET STRING, alarmLogOccurTime DateAndTime } alarmLogIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of current alarm." ::= { alarmLogEntry 1 } alarmLogType OBJECT-TYPE SYNTAX INTEGER { unit-out(0), sfp-out(1), link-down(2), vpws-down(3), vpls-down(4), lsp-down(5), mspw-down(6), mem-usage-high(7), mpls-tp-oam-loc(8), mpls-tp-oam-unexp-rmepid(9), mpls-tp-oam-unexp-interval(10), mpls-tp-oam-unexp-megid(11), mpls-tp-oam-unexp-level(12), mpls-tp-oam-rdi(13), mpls-tp-oam-rdi-tx(14), mpls-tp-oam-ais-defect(15), mpls-tp-oam-event-full(16), mpls-tp-oam-1dm-full(17), mpls-tp-oam-wait-1st-ccm(18), mpls-tp-oam-ais-rx(19), mpls-tp-oam-ais-tx(20), tca-unit-temperature-min-15min(21), tca-unit-temperature-min-1hour(22), tca-unit-temperature-min-1day(23), tca-unit-temperature-max-15min(24), tca-unit-temperature-max-1hour(25), tca-unit-temperature-max-1day(26), tca-sfp-rx-power-min-15min(27), tca-sfp-rx-power-min-1hour(28), tca-sfp-rx-power-min-1day(29), tca-sfp-rx-power-max-15min(30), tca-sfp-rx-power-max-1hour(31), tca-sfp-rx-power-max-1day(32), tca-sfp-tx-power-min-15min(33), tca-sfp-tx-power-min-1hour(34), tca-sfp-tx-power-min-1day(35), tca-sfp-tx-power-max-15min(36), tca-sfp-tx-power-max-1hourn(37), tca-sfp-tx-power-max-1day(38), tca-if-dropped-events-15min(39), tca-if-dropped-events-1hour(40), tca-if-dropped-events-1day(41), tca-if-input-packets-15min(42), tca-if-input-packets-1hour(43), tca-if-input-packets-1day(44), tca-if-input-bytes-15min(45), tca-if-input-bytes-1hour(46), tca-if-input-bytes-1day(47), tca-if-input-broadcasts-15min(48), tca-if-input-broadcasts-1hour(49), tca-if-input-broadcasts-1day(50), tca-if-input-multicasts-15min(51), tca-if-input-multicasts-1hour(52), tca-if-input-multicasts-1day(53), tca-if-crc-errors-15min(54), tca-if-crc-errors-1hour(55), tca-if-crc-errors-1day(56), tca-if-collisions-15min(57), tca-if-collisions-1hour(58), tca-if-collisions-1day(59), tca-if-undersized-packets-15min(60), tca-if-undersized-packets-1hour(61), tca-if-undersized-packets-1day(62), tca-if-oversized-packets-15min(63), tca-if-oversized-packets-1hour(64), tca-if-oversized-packets-1day(65), tca-if-fragments-15min(66), tca-if-fragments-1hour(67), tca-if-fragments-1day(68), tca-if-jabbers-15min(69), tca-if-jabbers-1hour(70), tca-if-jabbers-1day(71), tca-if-packet-64-15min(72), tca-if-packet-64-1hour(73), tca-if-packet-64-1day(74), tca-if-packet-65-127-15min(75), tca-if-packet-65-127-1hour(76), tca-if-packet-65-127-1day(77), tca-if-packet-128-255-15min(78), tca-if-packet-128-255-1hour(79), tca-if-packet-128-255-1day(80), tca-if-packet-256-511-15min(81), tca-if-packet-256-511-1hour(82), tca-if-packet-256-511-1day(83), tca-if-packet-512-1023-15min(84), tca-if-packet-512-1023-1hour(85), tca-if-packet-512-1023-1day(86), tca-if-packet-1024-15min(87), tca-if-packet-1024-1hour(88), tca-if-packet-1024-1day(89), tca-if-output-packets-15min(90), tca-if-output-packets-1hour(91), tca-if-output-packets-1day(92), tca-if-output-bytes-15min(93), tca-if-output-bytes-1hour(94), tca-if-output-bytes-1day(95), tca-lsp-pe-out-packets-15min(96), tca-lsp-pe-out-packets-1hour(97), tca-lsp-pe-out-packets-1day(98), tca-lsp-pe-out-bytes-15min(99), tca-lsp-pe-out-bytes-1hour(100), tca-lsp-pe-out-bytes-1day(101), tca-lsp-p-east-in-packets-15min(102), tca-lsp-p-east-in-packets-1hour(103), tca-lsp-p-east-in-packets-1day(104), tca-lsp-p-east-in-bytes-15min(105), tca-lsp-p-east-in-bytes-1hour(106), tca-lsp-p-east-in-bytes-1day(107), tca-lsp-p-west-in-packets-15min(108), tca-lsp-p-west-in-packets-1hour(109), tca-lsp-p-west-in-packets-1day(110), tca-lsp-p-west-in-bytes-15min(111), tca-lsp-p-west-in-bytes-1hour(112), tca-lsp-p-west-in-bytes-1day(113), tca-vpws-ingress-packets-15min(114), tca-vpws-ingress-packets-1hour(115), tca-vpws-ingress-packets-1day(116), tca-vpws-ingress-bytes-15min(117), tca-vpws-ingress-bytes-1hour(118), tca-vpws-ingress-bytes-1day(119), tca-vpws-egress-packets-15min(120), tca-vpws-egress-packets-1hour(121), tca-vpws-egress-packets-1day(122), tca-vpws-egress-bytes-15min(123), tca-vpws-egress-bytes-1hour(124), tca-vpws-egress-bytes-1day(125), tca-vpls-ingress-packets-15min(126), tca-vpls-ingress-packets-1hour(127), tca-vpls-ingress-packets-1day(128), tca-vpls-ingress-bytes-15min(129), tca-vpls-ingress-bytes-1hour(130), tca-vpls-ingress-bytes-1day(131), tca-vpls-egress-packets-15min(132), tca-vpls-egress-packets-1hour(133), tca-vpls-egress-packets-1day(134), tca-vpls-egress-bytes-15min(135), tca-vpls-egress-bytes-1hour(136), tca-vpls-egress-bytes-1day(137) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { alarmLogEntry 2 } alarmLogObject OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The object of the alarm." ::= { alarmLogEntry 3 } alarmLogSeverity OBJECT-TYPE SYNTAX INTEGER { warning(0), minor(1), major(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity of the alarm." ::= { alarmLogEntry 4 } alarmLogServiceAffect OBJECT-TYPE SYNTAX INTEGER { service-affected(0), not-service-affected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this alarm affects service." ::= { alarmLogEntry 5 } alarmLogAddInfo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Additional information of the alarm." ::= { alarmLogEntry 6 } alarmLogOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the alarm." ::= { alarmLogEntry 7 } alarmHistoryLogTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmHistoryLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains all current alarms." ::= { alarm 3 } alarmHistoryLogEntry OBJECT-TYPE SYNTAX AlarmHistoryLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of temperature information of all units." INDEX { alarmHistoryLogIndex } ::= { alarmHistoryLogTable 1 } AlarmHistoryLogEntry ::= SEQUENCE { alarmHistoryLogIndex Integer32, alarmHistoryLogSeq Integer32, alarmHistoryLogType INTEGER, alarmHistoryLogObject OCTET STRING, alarmHistoryLogSeverity INTEGER, alarmHistoryLogServiceAffect INTEGER, alarmHistoryLogAddInfo OCTET STRING, alarmHistoryLogOccurTime DateAndTime, alarmHistoryLogReleaseTime DateAndTime } alarmHistoryLogIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index of history alarms." ::= { alarmHistoryLogEntry 1 } alarmHistoryLogSeq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sequence number of the history alarm." ::= { alarmHistoryLogEntry 2 } alarmHistoryLogType OBJECT-TYPE SYNTAX INTEGER { unit-out(0), sfp-out(1), link-down(2), vpws-down(3), vpls-down(4), lsp-down(5), mspw-down(6), mem-usage-high(7), mpls-tp-oam-loc(8), mpls-tp-oam-unexp-rmepid(9), mpls-tp-oam-unexp-interval(10), mpls-tp-oam-unexp-megid(11), mpls-tp-oam-unexp-level(12), mpls-tp-oam-rdi(13), mpls-tp-oam-rdi-tx(14), mpls-tp-oam-ais-defect(15), mpls-tp-oam-event-full(16), mpls-tp-oam-1dm-full(17), mpls-tp-oam-wait-1st-ccm(18), mpls-tp-oam-ais-rx(19), mpls-tp-oam-ais-tx(20), tca-unit-temperature-min-15min(21), tca-unit-temperature-min-1hour(22), tca-unit-temperature-min-1day(23), tca-unit-temperature-max-15min(24), tca-unit-temperature-max-1hour(25), tca-unit-temperature-max-1day(26), tca-sfp-rx-power-min-15min(27), tca-sfp-rx-power-min-1hour(28), tca-sfp-rx-power-min-1day(29), tca-sfp-rx-power-max-15min(30), tca-sfp-rx-power-max-1hour(31), tca-sfp-rx-power-max-1day(32), tca-sfp-tx-power-min-15min(33), tca-sfp-tx-power-min-1hour(34), tca-sfp-tx-power-min-1day(35), tca-sfp-tx-power-max-15min(36), tca-sfp-tx-power-max-1hourn(37), tca-sfp-tx-power-max-1day(38), tca-if-dropped-events-15min(39), tca-if-dropped-events-1hour(40), tca-if-dropped-events-1day(41), tca-if-input-packets-15min(42), tca-if-input-packets-1hour(43), tca-if-input-packets-1day(44), tca-if-input-bytes-15min(45), tca-if-input-bytes-1hour(46), tca-if-input-bytes-1day(47), tca-if-input-broadcasts-15min(48), tca-if-input-broadcasts-1hour(49), tca-if-input-broadcasts-1day(50), tca-if-input-multicasts-15min(51), tca-if-input-multicasts-1hour(52), tca-if-input-multicasts-1day(53), tca-if-crc-errors-15min(54), tca-if-crc-errors-1hour(55), tca-if-crc-errors-1day(56), tca-if-collisions-15min(57), tca-if-collisions-1hour(58), tca-if-collisions-1day(59), tca-if-undersized-packets-15min(60), tca-if-undersized-packets-1hour(61), tca-if-undersized-packets-1day(62), tca-if-oversized-packets-15min(63), tca-if-oversized-packets-1hour(64), tca-if-oversized-packets-1day(65), tca-if-fragments-15min(66), tca-if-fragments-1hour(67), tca-if-fragments-1day(68), tca-if-jabbers-15min(69), tca-if-jabbers-1hour(70), tca-if-jabbers-1day(71), tca-if-packet-64-15min(72), tca-if-packet-64-1hour(73), tca-if-packet-64-1day(74), tca-if-packet-65-127-15min(75), tca-if-packet-65-127-1hour(76), tca-if-packet-65-127-1day(77), tca-if-packet-128-255-15min(78), tca-if-packet-128-255-1hour(79), tca-if-packet-128-255-1day(80), tca-if-packet-256-511-15min(81), tca-if-packet-256-511-1hour(82), tca-if-packet-256-511-1day(83), tca-if-packet-512-1023-15min(84), tca-if-packet-512-1023-1hour(85), tca-if-packet-512-1023-1day(86), tca-if-packet-1024-15min(87), tca-if-packet-1024-1hour(88), tca-if-packet-1024-1day(89), tca-if-output-packets-15min(90), tca-if-output-packets-1hour(91), tca-if-output-packets-1day(92), tca-if-output-bytes-15min(93), tca-if-output-bytes-1hour(94), tca-if-output-bytes-1day(95), tca-lsp-pe-out-packets-15min(96), tca-lsp-pe-out-packets-1hour(97), tca-lsp-pe-out-packets-1day(98), tca-lsp-pe-out-bytes-15min(99), tca-lsp-pe-out-bytes-1hour(100), tca-lsp-pe-out-bytes-1day(101), tca-lsp-p-east-in-packets-15min(102), tca-lsp-p-east-in-packets-1hour(103), tca-lsp-p-east-in-packets-1day(104), tca-lsp-p-east-in-bytes-15min(105), tca-lsp-p-east-in-bytes-1hour(106), tca-lsp-p-east-in-bytes-1day(107), tca-lsp-p-west-in-packets-15min(108), tca-lsp-p-west-in-packets-1hour(109), tca-lsp-p-west-in-packets-1day(110), tca-lsp-p-west-in-bytes-15min(111), tca-lsp-p-west-in-bytes-1hour(112), tca-lsp-p-west-in-bytes-1day(113), tca-vpws-ingress-packets-15min(114), tca-vpws-ingress-packets-1hour(115), tca-vpws-ingress-packets-1day(116), tca-vpws-ingress-bytes-15min(117), tca-vpws-ingress-bytes-1hour(118), tca-vpws-ingress-bytes-1day(119), tca-vpws-egress-packets-15min(120), tca-vpws-egress-packets-1hour(121), tca-vpws-egress-packets-1day(122), tca-vpws-egress-bytes-15min(123), tca-vpws-egress-bytes-1hour(124), tca-vpws-egress-bytes-1day(125), tca-vpls-ingress-packets-15min(126), tca-vpls-ingress-packets-1hour(127), tca-vpls-ingress-packets-1day(128), tca-vpls-ingress-bytes-15min(129), tca-vpls-ingress-bytes-1hour(130), tca-vpls-ingress-bytes-1day(131), tca-vpls-egress-packets-15min(132), tca-vpls-egress-packets-1hour(133), tca-vpls-egress-packets-1day(134), tca-vpls-egress-bytes-15min(135), tca-vpls-egress-bytes-1hour(136), tca-vpls-egress-bytes-1day(137) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit name." ::= { alarmHistoryLogEntry 3 } alarmHistoryLogObject OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The object of the alarm." ::= { alarmHistoryLogEntry 4 } alarmHistoryLogSeverity OBJECT-TYPE SYNTAX INTEGER { warning(0), minor(1), major(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity of the alarm." ::= { alarmHistoryLogEntry 5 } alarmHistoryLogServiceAffect OBJECT-TYPE SYNTAX INTEGER { service-affected(0), not-service-affected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this alarm affects service." ::= { alarmHistoryLogEntry 6 } alarmHistoryLogAddInfo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Additional information of the alarm." ::= { alarmHistoryLogEntry 7 } alarmHistoryLogOccurTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the alarm." ::= { alarmHistoryLogEntry 8 } alarmHistoryLogReleaseTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of the occurrence of the alarm." ::= { alarmHistoryLogEntry 9 } alarmSwitchAlarm OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable all alarm event traps.disable(2) enable(1)" DEFVAL { enable } ::= { alarm 4 } alarmSwitchTca OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable all tca event traps.disable(2) enable(1)" DEFVAL { enable } ::= { alarm 5 } alarmTrap OBJECT IDENTIFIER ::= { alarm 100 } aAlarmEventNotify NOTIFICATION-TYPE OBJECTS { alarmHistoryLogSeq, alarmHistoryLogType, alarmHistoryLogObject, alarmHistoryLogSeverity, alarmHistoryLogServiceAffect, alarmHistoryLogAddInfo, alarmHistoryLogOccurTime, alarmHistoryLogReleaseTime } STATUS current DESCRIPTION "This trap will be generated when system fault is detected or released. ie. unit-out, tca, etc." ::= {alarmTrap 1} -- Sub Module: rsvpTe -- rsvpTe: inteface rsvpTeIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure mpls-te on an interface." ::= { rsvpTe 1 } rsvpTeIfEntry OBJECT-TYPE SYNTAX RsvpTeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeIfTable." INDEX { ifIndex } ::= { rsvpTeIfTable 1 } RsvpTeIfEntry ::= SEQUENCE { rsvpTeIfEnable INTEGER, rsvpTeIfHelloInterval Integer32, rsvpTeIfHelloReceipt INTEGER, rsvpTeIfHelloTimeout Integer32, rsvpTeIfKeepMultiplier Integer32, rsvpTeIfRefreshTime Integer32, rsvpTeAckWaitTime Integer32, rsvpTeMessageAck INTEGER, rsvpTeRefreshReduction INTEGER } rsvpTeIfEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RSVP on this interface" DEFVAL { disable } ::= { rsvpTeIfEntry 1 } rsvpTeIfHelloInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure interval between successive Hello packets to neighbor on this interface" DEFVAL { 2 } ::= { rsvpTeIfEntry 2 } rsvpTeIfHelloReceipt OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the exchange of Hello messages on this interface" DEFVAL { disable } ::= { rsvpTeIfEntry 3 } rsvpTeIfHelloTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Timeout for clearing up all sessions shared with a neighbor on this interface" DEFVAL { 7 } ::= { rsvpTeIfEntry 4 } rsvpTeIfKeepMultiplier OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the constant to be used for calculating a valid lifetime on this interface" DEFVAL { 3 } ::= { rsvpTeIfEntry 5 } rsvpTeIfRefreshTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the path interval being used on this interface" DEFVAL { 30 } ::= { rsvpTeIfEntry 6 } rsvpTeAckWaitTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure acknowledgement wait timeout on this interface" DEFVAL { 1 } ::= { rsvpTeIfEntry 7 } rsvpTeMessageAck OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Message Acknowledgement on this interface" DEFVAL { disable } ::= { rsvpTeIfEntry 8 } rsvpTeRefreshReduction OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable refresh reduction for this interface" DEFVAL { enable } ::= { rsvpTeIfEntry 9 } -- rsvpTe: router rsvp rsvpTeGlobal OBJECT IDENTIFIER ::= { rsvpTe 2 } rsvpTeGlobalEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the Resource Reservation Protocol (RSVP) Globally." DEFVAL { disable } ::= { rsvpTeGlobal 1} rsvpTeGlobalExplicitNull OBJECT-TYPE SYNTAX INTEGER {explicitNull(1), noExplicitNull(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the state of send Explicit NULL Label" DEFVAL { noExplicitNull } ::= { rsvpTeGlobal 2 } rsvpTeGlobalHelloInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the interval between successive Hello packets to neighbor" DEFVAL { 2 } ::= { rsvpTeGlobal 3 } rsvpTeGlobalHelloTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the timeout for clearing up all sessions shared with a neighbor" DEFVAL { 7 } ::= { rsvpTeGlobal 4 } rsvpTeGlobalKeepMultiplier OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the constant to be used for calculating a valid lifetime" DEFVAL { 3 } ::= { rsvpTeGlobal 5 } rsvpTeGlobalNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeGlobalNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identify a directly connected ipv4 neighbor" ::= { rsvpTeGlobal 6 } rsvpTeGlobalNeighborEntry OBJECT-TYPE SYNTAX RsvpTeGlobalNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeGlobalNeighborTable" INDEX { rsvpTeGlobalNeighborAddr } ::= { rsvpTeGlobalNeighborTable 1 } RsvpTeGlobalNeighborEntry ::= SEQUENCE { rsvpTeGlobalNeighborAddr IpAddress, rsvpTeGlobalNeighborRowStatus RowStatus, rsvpTeGlobalNeighborUpStrmLSP Integer32, rsvpTeGlobalNeighborDnStrmLSP Integer32, rsvpTeGlobalNeighborRefReduc INTEGER, rsvpTeGlobalNeighborSrefreshIn Integer32, rsvpTeGlobalNeighborSrefreshType INTEGER, rsvpTeGlobalNeighborHelloStat INTEGER } rsvpTeGlobalNeighborAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the IPv4 address of the neighbor" ::= { rsvpTeGlobalNeighborEntry 1 } rsvpTeGlobalNeighborRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the rsvpTeGlobalNeighborEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { rsvpTeGlobalNeighborEntry 2 } rsvpTeGlobalNeighborUpStrmLSP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the up stream LSP." ::= { rsvpTeGlobalNeighborEntry 3 } rsvpTeGlobalNeighborDnStrmLSP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the down stream LSP." ::= { rsvpTeGlobalNeighborEntry 4 } rsvpTeGlobalNeighborRefReduc OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The RR(Refresh Reduction) configuration of the rsvp neighbor." ::= { rsvpTeGlobalNeighborEntry 5 } rsvpTeGlobalNeighborSrefreshIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The refresh timer of the rsvp neighbor." ::= { rsvpTeGlobalNeighborEntry 6 } rsvpTeGlobalNeighborSrefreshType OBJECT-TYPE SYNTAX INTEGER {explicit(1), implicit(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The refresh type of the rsvp neighbor." ::= { rsvpTeGlobalNeighborEntry 7 } rsvpTeGlobalNeighborHelloStat OBJECT-TYPE SYNTAX INTEGER {up(1), lost(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The status of hello keep-alive message." ::= { rsvpTeGlobalNeighborEntry 8 } rsvpTeGlobalLoopDetection OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the loop detection" DEFVAL { disable } ::= { rsvpTeGlobal 7 } rsvpTeGlobalRefreshTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure RSVP refresh interval timer" DEFVAL { 30 } ::= { rsvpTeGlobal 8 } rsvpTeGlobalReoptimizeTime OBJECT-TYPE SYNTAX Integer32 (0..655535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the Reoptimize timer" DEFVAL { 3600 } ::= { rsvpTeGlobal 9 } rsvpTeGlobalVersion OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Protocal version of rsvp." ::= { rsvpTeGlobal 10 } rsvpTeGlobalProcessUpTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..65535)) MAX-ACCESS read-only STATUS current DESCRIPTION "Process up time of rsvp." ::= { rsvpTeGlobal 11 } -- rsvpTe: rsvp trunk rsvpTeTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of rsvp trunk." ::= { rsvpTe 3 } rsvpTeTrunkEntry OBJECT-TYPE SYNTAX RsvpTeTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeTrunkTable" INDEX { rsvpTeTrunkName } ::= { rsvpTeTrunkTable 1 } RsvpTeTrunkEntry ::= SEQUENCE { rsvpTeTrunkName OCTET STRING, rsvpTeTrunkRowStatus RowStatus, rsvpTeTrunkExtTunnelId IpAddress, rsvpTeTrunkPrimaryFilter INTEGER, rsvpTeTrunkSecondaryFilter INTEGER, rsvpTeTrunkSource IpAddress, rsvpTeTrunkPrimaryHoldPriority Integer32, rsvpTeTrunkSecondaryHoldPriority Integer32, rsvpTeTrunkPrimaryHopLimit Integer32, rsvpTeTrunkSecondaryHopLimit Integer32, rsvpTeTrunkPrimaryCspf INTEGER, rsvpTeTrunkSecondaryCspf INTEGER, rsvpTeTrunkLspMetricType Integer32, rsvpTeTrunkLspMetricValue Integer32, rsvpTeTrunkPrimaryRecord INTEGER, rsvpTeTrunkSecondaryRecord INTEGER, rsvpTeTrunkPrimaryPathName OCTET STRING, rsvpTeTrunkSecondaryPathName OCTET STRING, rsvpTeTrunkPrimaryRetryTimer Integer32, rsvpTeTrunkSecondaryRetryTimer Integer32, rsvpTeTrunkPrimarySetupPriority Integer32, rsvpTeTrunkSecondarySetupPriority Integer32, rsvpTeTrunkdestination IpAddress, rsvpTeTrunkLSPCount Integer32 } rsvpTeTrunkName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the RSVP trunk" ::= { rsvpTeTrunkEntry 1 } rsvpTeTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the rsvpTeTrunkEntry row 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { rsvpTeTrunkEntry 2 } rsvpTeTrunkExtTunnelId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specify an extended tunnel identifier for this trunk." ::= { rsvpTeTrunkEntry 3 } rsvpTeTrunkPrimaryFilter OBJECT-TYPE SYNTAX INTEGER {fixed(1), shared-explicit(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a filter to be used for this LSP." DEFVAL { shared-explicit } ::= { rsvpTeTrunkEntry 4 } rsvpTeTrunkSecondaryFilter OBJECT-TYPE SYNTAX INTEGER {fixed(1), shared-explicit(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a filter to be used for this LSP." ::= { rsvpTeTrunkEntry 5 } rsvpTeTrunkSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the IPv4 tunnel ingress." ::= { rsvpTeTrunkEntry 6 } rsvpTeTrunkPrimaryHoldPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a hold priority for this LSP." DEFVAL { 0 } ::= { rsvpTeTrunkEntry 7 } rsvpTeTrunkSecondaryHoldPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a hold priority for this LSP." ::= { rsvpTeTrunkEntry 8 } rsvpTeTrunkPrimaryHopLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a hop limit for this LSP." DEFVAL { 65 } ::= { rsvpTeTrunkEntry 9 } rsvpTeTrunkSecondaryHopLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a hop limit for this LSP." DEFVAL { 65 } ::= { rsvpTeTrunkEntry 10 } rsvpTeTrunkPrimaryCspf OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Use CSPF for ERO calculation." DEFVAL { disable } ::= { rsvpTeTrunkEntry 11 } rsvpTeTrunkSecondaryCspf OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Use CSPF for ERO calculation." DEFVAL { disable } ::= { rsvpTeTrunkEntry 12 } rsvpTeTrunkPrimaryRecord OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Record route taken by PATH message in order to reach tunnel egress." DEFVAL { disable } ::= { rsvpTeTrunkEntry 13 } rsvpTeTrunkSecondaryRecord OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Record route taken by PATH message in order to reach tunnel egress." DEFVAL { disable } ::= { rsvpTeTrunkEntry 14 } rsvpTeTrunkPrimaryPathName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify an RSVP Path to be used." ::= { rsvpTeTrunkEntry 15 } rsvpTeTrunkSecondaryPathName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify an RSVP Path to be used." ::= { rsvpTeTrunkEntry 16 } rsvpTeTrunkPrimaryRetryTimer OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a retry interval for this LSP." DEFVAL { 30 } ::= { rsvpTeTrunkEntry 17 } rsvpTeTrunkSecondaryRetryTimer OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a retry interval for this LSP." DEFVAL { 30 } ::= { rsvpTeTrunkEntry 18 } rsvpTeTrunkPrimarySetupPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a setup priority for this LSP." DEFVAL { 0 } ::= { rsvpTeTrunkEntry 19 } rsvpTeTrunkSecondarySetupPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure a setup priority for this LSP." ::= { rsvpTeTrunkEntry 20} rsvpTeTrunkdestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the IPv4 tunnel egress." ::= { rsvpTeTrunkEntry 21} rsvpTeTrunkLSPCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total LSP count of the rsvp trunk." ::= { rsvpTeTrunkEntry 22 } -- rsvpTe: rsvp trunk - map route rsvpTeTrunkMapRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeTrunkMapRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Map route entries in trunk." ::= { rsvpTe 4} rsvpTeTrunkMapRouteEntry OBJECT-TYPE SYNTAX RsvpTeTrunkMapRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of map route table" INDEX { rsvpTeTrunkName , rsvpTeTrunkMapRouteIpAddr, rsvpTeTrunkMapRouteIpMaskLength} ::= { rsvpTeTrunkMapRouteTable 1} RsvpTeTrunkMapRouteEntry ::= SEQUENCE { rsvpTeTrunkMapRouteIpAddr IpAddress, rsvpTeTrunkMapRouteIpMaskLength Integer32, rsvpTeTrunkMapRouteRowStatus RowStatus } rsvpTeTrunkMapRouteIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the prefix to be mapped." ::= { rsvpTeTrunkMapRouteEntry 1} rsvpTeTrunkMapRouteIpMaskLength OBJECT-TYPE SYNTAX Integer32 (0.. 32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure the prefix length to be mapped." ::= { rsvpTeTrunkMapRouteEntry 2} rsvpTeTrunkMapRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the rsvpTeTrunkMapRouteEntry row 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { rsvpTeTrunkMapRouteEntry 3} -- rsvpTe: rsvp path rsvpTePathTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTePathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of rsvp path entries." ::= { rsvpTe 5 } rsvpTePathEntry OBJECT-TYPE SYNTAX RsvpTePathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvp path table." INDEX { rsvpTePathName } ::= { rsvpTePathTable 1 } RsvpTePathEntry ::= SEQUENCE { rsvpTePathName OCTET STRING, rsvpTePathRowStatus RowStatus } rsvpTePathName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of rsvp path." ::= { rsvpTePathEntry 1 } rsvpTePathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the rsvpTePathEntry row 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { rsvpTePathEntry 2 } -- rsvpTe: rsvp path node rsvpTePathHopTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTePathHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of rsvp path hop entries." ::= { rsvpTe 6 } rsvpTePathHopEntry OBJECT-TYPE SYNTAX RsvpTePathHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvp path hop table." INDEX { rsvpTePathName, rsvpTePathHopAddrID } ::= { rsvpTePathHopTable 1 } RsvpTePathHopEntry ::= SEQUENCE { rsvpTePathHopAddrID Integer32, rsvpTePathHopAddrType INTEGER, rsvpTePathHopAddr IpAddress, rsvpTePathHopRowStatus RowStatus } rsvpTePathHopAddrID OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of a node in rsvp path. It should be unique under same path name." ::= { rsvpTePathHopEntry 1 } rsvpTePathHopAddrType OBJECT-TYPE SYNTAX INTEGER {loose(1), strict(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The type of a node in rsvp path." ::= { rsvpTePathHopEntry 2 } rsvpTePathHopAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Configure IPv4 Address of Hop." ::= { rsvpTePathHopEntry 3 } rsvpTePathHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the rsvpTePathEntry row 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { rsvpTePathHopEntry 4 } -- rsvpTe: show rsvp rsvpTeSummary OBJECT IDENTIFIER ::= { rsvpTe 7} rsvpTeSummarySessionTatolCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of the rsvp session." ::= { rsvpTeSummary 1 } rsvpTeSummarySessionUpCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of the rsvp session which status is up." ::= { rsvpTeSummary 2 } rsvpTeSummarySessionDownCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of the rsvp session which status is down." ::= { rsvpTeSummary 3 } rsvpTeSummarySessionTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeSummarySessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of rsvp session." ::= { rsvpTeSummary 4 } rsvpTeSummarySessionEntry OBJECT-TYPE SYNTAX RsvpTeSummarySessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeSummarySessionTable" INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId } ::= { rsvpTeSummarySessionTable 1 } RsvpTeSummarySessionEntry ::= SEQUENCE { rsvpTeSummarySessionLSPId Integer32, rsvpTeSummarySessionSource IpAddress, rsvpTeSummarySessionDestination IpAddress, rsvpTeSummarySessionTunnelId Integer32, rsvpTeSummarySessionExtTunnelId IpAddress, rsvpTeSummarySessionTrunkName OCTET STRING, rsvpTeSummarySessionState INTEGER, rsvpTeSummarySessionIsPrimary INTEGER, rsvpTeSummarySessionReserve INTEGER, rsvpTeSummarySessionRefCount Integer32, rsvpTeSummarySessionLabelIn Integer32, rsvpTeSummarySessionLabelOut Integer32, rsvpTeSummarySessionType INTEGER, rsvpTeSummarySessionFSMState INTEGER, rsvpTeSummarySessionSetupPriority Integer32, rsvpTeSummarySessionHoldPriority Integer32, rsvpTeSummarySessionCspfUsage INTEGER, rsvpTeSummarySessionLSPMetric Integer32, rsvpTeSummarySessionLSPProtection INTEGER, rsvpTeSummarySessionUpStreamAddr IpAddress, rsvpTeSummarySessionUpStreamIfIndex Integer32, rsvpTeSummarySessionDownStreamAddr IpAddress, rsvpTeSummarySessionDownStreamIfIndex Integer32, rsvpTeSummarySessionPathRefreshSec Integer32, rsvpTeSummarySessionPathRefreshDue Integer32, rsvpTeSummarySessionPathRREnable INTEGER, rsvpTeSummarySessionLifeTime Integer32, rsvpTeSummarySessionDueTime Integer32, rsvpTeSummarySessionStyle INTEGER, rsvpTeSummarySessionTrafficType INTEGER, rsvpTeSummarySessionMTU Integer32, rsvpTeSummarySessionLastErrorCode OCTET STRING, rsvpTeSummarySessionLastErrorValue OCTET STRING, rsvpTeSummarySessionLastErrorNode IpAddress, rsvpTeSummarySessionTrunkType INTEGER } rsvpTeSummarySessionLSPId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Lsp id of the rsvp session. " ::= { rsvpTeSummarySessionEntry 1 } rsvpTeSummarySessionSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Source address of the rsvp session." ::= { rsvpTeSummarySessionEntry 2 } rsvpTeSummarySessionDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination address of the rsvp session." ::= { rsvpTeSummarySessionEntry 3 } rsvpTeSummarySessionTunnelId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel id of the rsvp session. " ::= { rsvpTeSummarySessionEntry 4 } rsvpTeSummarySessionExtTunnelId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ext-Tunnel id of the rsvp session. " ::= { rsvpTeSummarySessionEntry 5 } rsvpTeSummarySessionTrunkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the rsvp trunk" ::= { rsvpTeSummarySessionEntry 6 } rsvpTeSummarySessionState OBJECT-TYPE SYNTAX INTEGER {up(1), down(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "state of the rsvp session." ::= { rsvpTeSummarySessionEntry 7 } rsvpTeSummarySessionIsPrimary OBJECT-TYPE SYNTAX INTEGER {primary(1), secondary(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If the rsvp session is primary or secondary." ::= { rsvpTeSummarySessionEntry 8 } rsvpTeSummarySessionReserve OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If resource reserve is enabled for this session." ::= { rsvpTeSummarySessionEntry 9 } rsvpTeSummarySessionRefCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reference count of the rsvp session." ::= { rsvpTeSummarySessionEntry 10 } rsvpTeSummarySessionLabelIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "In lable of the rsvp session." ::= { rsvpTeSummarySessionEntry 11 } rsvpTeSummarySessionLabelOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out lable of the rsvp session." ::= { rsvpTeSummarySessionEntry 12 } rsvpTeSummarySessionType OBJECT-TYPE SYNTAX INTEGER {ingress(1), transmit(2), egress(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the rsvp session" ::= { rsvpTeSummarySessionEntry 13 } rsvpTeSummarySessionFSMState OBJECT-TYPE SYNTAX INTEGER {idle(0), gmplsLabelValidateSent(1), qosResvSentforReverseDir(2), nexthopRequestSent(3), waitingforRESVmessage(4), labelRequestSent(5), mplsMessageSent(6), operational(7), usingBackup(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "FSM state of the rsvp session" ::= { rsvpTeSummarySessionEntry 14 } rsvpTeSummarySessionSetupPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Setup priority of the rsvp session" ::= { rsvpTeSummarySessionEntry 15 } rsvpTeSummarySessionHoldPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Hold priority of the rsvp session" ::= { rsvpTeSummarySessionEntry 16 } rsvpTeSummarySessionCspfUsage OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If CSPF is enabled for this session. " ::= { rsvpTeSummarySessionEntry 17 } rsvpTeSummarySessionLSPMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "LSP Metric of the rsvp session. " ::= { rsvpTeSummarySessionEntry 18 } rsvpTeSummarySessionLSPProtection OBJECT-TYPE SYNTAX INTEGER {oneToOne(1), facility(2), none(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "LSP Protection type of the rsvp session. " ::= { rsvpTeSummarySessionEntry 19 } rsvpTeSummarySessionUpStreamAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream Ip Address of the rsvp session. " ::= { rsvpTeSummarySessionEntry 20 } rsvpTeSummarySessionUpStreamIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream interface index of the rsvp session. " ::= { rsvpTeSummarySessionEntry 21 } rsvpTeSummarySessionDownStreamAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "DownStream Ip Address of the rsvp session. " ::= { rsvpTeSummarySessionEntry 22 } rsvpTeSummarySessionDownStreamIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream interface index of the rsvp session. " ::= { rsvpTeSummarySessionEntry 23 } rsvpTeSummarySessionPathRefreshSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The refresh time of the rsvp path in session. " ::= { rsvpTeSummarySessionEntry 24 } rsvpTeSummarySessionPathRefreshDue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The due time of the rsvp path in session. " ::= { rsvpTeSummarySessionEntry 25 } rsvpTeSummarySessionPathRREnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "If refresh reduction is enabled for this rsvp session. " ::= { rsvpTeSummarySessionEntry 26 } rsvpTeSummarySessionLifeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The life time for this rsvp session. " ::= { rsvpTeSummarySessionEntry 27 } rsvpTeSummarySessionDueTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The due time for this rsvp session. " ::= { rsvpTeSummarySessionEntry 28 } rsvpTeSummarySessionStyle OBJECT-TYPE SYNTAX INTEGER {fixedFilter(1), sharedExplicitFilter(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The style this rsvp session. " ::= { rsvpTeSummarySessionEntry 29 } rsvpTeSummarySessionTrafficType OBJECT-TYPE SYNTAX INTEGER {guaranteed(1), controlledLoad(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The traffic type this rsvp session. " ::= { rsvpTeSummarySessionEntry 30 } rsvpTeSummarySessionMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MTU this rsvp session. " ::= { rsvpTeSummarySessionEntry 31 } rsvpTeSummarySessionLastErrorCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code this rsvp session. " ::= { rsvpTeSummarySessionEntry 32 } rsvpTeSummarySessionLastErrorValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The last error value this rsvp session. " ::= { rsvpTeSummarySessionEntry 33 } rsvpTeSummarySessionLastErrorNode OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The last error value this rsvp session. " ::= { rsvpTeSummarySessionEntry 34 } rsvpTeSummarySessionTrunkType OBJECT-TYPE SYNTAX INTEGER {gmpls(1), mpls(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The last error value this rsvp session. " ::= { rsvpTeSummarySessionEntry 35 } rsvpTeSummarySessionExplicitRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeSummarySessionExplicitRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Explicit route in rsvp session." ::= { rsvpTeSummary 5 } rsvpTeSummarySessionExplicitRouteEntry OBJECT-TYPE SYNTAX RsvpTeSummarySessionExplicitRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeSummarySessionExplicitRouteTable" INDEX {rsvpTeSummarySessionDestination, rsvpTeSummarySessionSource, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionLSPId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionExplicitRouteAddrId} ::= { rsvpTeSummarySessionExplicitRouteTable 1 } RsvpTeSummarySessionExplicitRouteEntry ::= SEQUENCE { rsvpTeSummarySessionExplicitRouteAddrId Integer32, rsvpTeSummarySessionExplicitRouteAddr IpAddress, rsvpTeSummarySessionExplicitRouteMaskLen Integer32, rsvpTeSummarySessionExplicitRouteType INTEGER } rsvpTeSummarySessionExplicitRouteAddrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of an explicit route entry. " ::= { rsvpTeSummarySessionExplicitRouteEntry 1 } rsvpTeSummarySessionExplicitRouteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 address of an explicit route entry. " ::= { rsvpTeSummarySessionExplicitRouteEntry 2 } rsvpTeSummarySessionExplicitRouteMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 mask length of an explicit route entry. " ::= { rsvpTeSummarySessionExplicitRouteEntry 3 } rsvpTeSummarySessionExplicitRouteType OBJECT-TYPE SYNTAX INTEGER {strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of an explicit route entry. " ::= { rsvpTeSummarySessionExplicitRouteEntry 4 } rsvpTeSummarySessionRecvRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeSummarySessionRecvRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Recv route in rsvp session." ::= { rsvpTeSummary 6 } rsvpTeSummarySessionRecvRouteEntry OBJECT-TYPE SYNTAX RsvpTeSummarySessionRecvRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeSummarySessionRecvRouteTable" INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionRecvRouteAddrId } ::= { rsvpTeSummarySessionRecvRouteTable 1 } RsvpTeSummarySessionRecvRouteEntry ::= SEQUENCE { rsvpTeSummarySessionRecvRouteAddrId Integer32, rsvpTeSummarySessionRecvRouteAddr IpAddress, rsvpTeSummarySessionRecvRouteMaskLen Integer32, rsvpTeSummarySessionRecvRouteType INTEGER } rsvpTeSummarySessionRecvRouteAddrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 address of an Recv route entry. " ::= { rsvpTeSummarySessionRecvRouteEntry 1 } rsvpTeSummarySessionRecvRouteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 address of an Recv route entry. " ::= { rsvpTeSummarySessionRecvRouteEntry 2 } rsvpTeSummarySessionRecvRouteMaskLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 mask length of an Recv route entry. " ::= { rsvpTeSummarySessionRecvRouteEntry 3 } rsvpTeSummarySessionRecvRouteType OBJECT-TYPE SYNTAX INTEGER {strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of an Recv route entry. " ::= { rsvpTeSummarySessionRecvRouteEntry 4 } rsvpTeSummarySessionRecordRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RsvpTeSummarySessionRecordRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Record route in rsvp session." ::= { rsvpTeSummary 7 } rsvpTeSummarySessionRecordRouteEntry OBJECT-TYPE SYNTAX RsvpTeSummarySessionRecordRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of rsvpTeSummarySessionRecordRouteTable" INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionRecordRouteAddrId } ::= { rsvpTeSummarySessionRecordRouteTable 1 } RsvpTeSummarySessionRecordRouteEntry ::= SEQUENCE { rsvpTeSummarySessionRecordRouteAddrId Integer32, rsvpTeSummarySessionRecordRouteAddr OCTET STRING } rsvpTeSummarySessionRecordRouteAddrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The id of an Record route entry. " ::= { rsvpTeSummarySessionRecordRouteEntry 1 } rsvpTeSummarySessionRecordRouteAddr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The ipv4 address of an Record route entry. " ::= { rsvpTeSummarySessionRecordRouteEntry 2 } rsvpTeSummaryStatistics OBJECT IDENTIFIER ::= { rsvpTeSummary 8} rsvpTeSummaryPathSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path packet sent from this system. " ::= { rsvpTeSummaryStatistics 1 } rsvpTeSummaryPathRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path packet recieved by this system. " ::= { rsvpTeSummaryStatistics 2 } rsvpTeSummaryPathErrSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path-err packet sent from this system. " ::= { rsvpTeSummaryStatistics 3 } rsvpTeSummaryPathErrRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path-err packet recieved by this system. " ::= { rsvpTeSummaryStatistics 4 } rsvpTeSummaryPathTearSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path-tear packet sent from this system. " ::= { rsvpTeSummaryStatistics 5 } rsvpTeSummaryPathTearRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp path-tear packet recieved by this system. " ::= { rsvpTeSummaryStatistics 6 } rsvpTeSummaryResvFFSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-FF packet sent from this system. " ::= { rsvpTeSummaryStatistics 7 } rsvpTeSummaryResvFFRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-FF packet recieved by this system. " ::= { rsvpTeSummaryStatistics 8 } rsvpTeSummaryResvWFSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-WF packet sent from this system. " ::= { rsvpTeSummaryStatistics 9 } rsvpTeSummaryResvWFRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-WF packet recieved by this system. " ::= { rsvpTeSummaryStatistics 10 } rsvpTeSummaryResvSESent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-SE packet sent from this system. " ::= { rsvpTeSummaryStatistics 11 } rsvpTeSummaryResvSERecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-SE packet recieved by this system. " ::= { rsvpTeSummaryStatistics 12 } rsvpTeSummaryResvErrSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Err packet sent from this system. " ::= { rsvpTeSummaryStatistics 13 } rsvpTeSummaryResvErrRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Err packet recieved by this system. " ::= { rsvpTeSummaryStatistics 14 } rsvpTeSummaryResvTearSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Tear packet sent from this system. " ::= { rsvpTeSummaryStatistics 15 } rsvpTeSummaryResvTearRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Tear packet recieved by this system. " ::= { rsvpTeSummaryStatistics 16 } rsvpTeSummaryResvConfSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Conf packet sent from this system. " ::= { rsvpTeSummaryStatistics 17 } rsvpTeSummaryResvConfRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Resv-Conf packet recieved by this system. " ::= { rsvpTeSummaryStatistics 18 } rsvpTeSummaryHelloSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Hello packet sent from this system. " ::= { rsvpTeSummaryStatistics 19 } rsvpTeSummaryHelloRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Hello packet recieved by this system. " ::= { rsvpTeSummaryStatistics 20 } rsvpTeSummaryBundleSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Bundle packet sent from this system. " ::= { rsvpTeSummaryStatistics 21 } rsvpTeSummaryBundleRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp Bundle packet recieved by this system. " ::= { rsvpTeSummaryStatistics 22 } rsvpTeSummaryAckSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp ack packet sent from this system. " ::= { rsvpTeSummaryStatistics 23 } rsvpTeSummaryAckRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp ack packet recieved by this system. " ::= { rsvpTeSummaryStatistics 24 } rsvpTeSummarySrefreshSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp srefresh packet sent from this system. " ::= { rsvpTeSummaryStatistics 25 } rsvpTeSummarySrefreshRecv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of the rsvp srefresh packet recieved by this system. " ::= { rsvpTeSummaryStatistics 26 } -- Sub Module: g.8031 -- g8031: eps group g8031EpsGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF G8031EpsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of G.8031 eps group." ::= { g8031 1 } g8031EpsGroupEntry OBJECT-TYPE SYNTAX G8031EpsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of G.8031 eps group." INDEX { g8031EpsGroupId } ::= { g8031EpsGroupTable 1 } G8031EpsGroupEntry ::= SEQUENCE { g8031EpsGroupId Integer32, g8031EpsGroupWorkingIfindex Integer32, g8031EpsGroupProtectionIfindex Integer32, g8031EpsGroupRowStatus RowStatus, g8031EpsGroupWTR Integer32, g8031EpsGroupHoldOff Integer32, g8031EpsGroupMode INTEGER, g8031EpsGroupDomain OCTET STRING, g8031EpsGroupWorkingService OCTET STRING, g8031EpsGroupProtectionService OCTET STRING, g8031EpsGroupCurrentState INTEGER, g8031EpsGroupLastState INTEGER, g8031EpsGroupLastEvent INTEGER, g8031EpsGroupFarEndState INTEGER, g8031EpsGroupRequestSignal INTEGER, g8031EpsGroupBridgeSignal INTEGER, g8031EpsGroupAPSVid Integer32, g8031EpsGroupDFOPState INTEGER } g8031EpsGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of G.8031 eps group." ::= { g8031EpsGroupEntry 1 } g8031EpsGroupWorkingIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Working interface of G.8031 eps group." ::= { g8031EpsGroupEntry 2 } g8031EpsGroupProtectionIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Protection interface of G.8031 eps group." ::= { g8031EpsGroupEntry 3 } g8031EpsGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the g8031EpsGroupEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { g8031EpsGroupEntry 4 } g8031EpsGroupWTR OBJECT-TYPE SYNTAX Integer32(5..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Wait to restore timer in minute" DEFVAL { 5 } ::= { g8031EpsGroupEntry 5 } g8031EpsGroupHoldOff OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Hold off timer in 100 ms" DEFVAL { 0 } ::= { g8031EpsGroupEntry 6 } g8031EpsGroupMode OBJECT-TYPE SYNTAX INTEGER {revertive(1), nonRevertive(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Revertive mode of G.8031 eps group." DEFVAL { revertive } ::= { g8031EpsGroupEntry 7 } g8031EpsGroupDomain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm domain of the G.8031 eps group." ::= { g8031EpsGroupEntry 8} g8031EpsGroupWorkingService OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm service id of working entity for the G.8031 eps group." ::= { g8031EpsGroupEntry 9} g8031EpsGroupProtectionService OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm service id of protection entity for the G.8031 eps group." ::= { g8031EpsGroupEntry 10} g8031EpsGroupCurrentState OBJECT-TYPE SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the G.8031 eps group." ::= { g8031EpsGroupEntry 11} g8031EpsGroupLastState OBJECT-TYPE SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Last state of the G.8031 eps group." ::= { g8031EpsGroupEntry 12} g8031EpsGroupLastEvent OBJECT-TYPE SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Last event of the G.8031 eps group." ::= { g8031EpsGroupEntry 13} g8031EpsGroupFarEndState OBJECT-TYPE SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)} MAX-ACCESS read-only STATUS current DESCRIPTION "Far end state of the G.8031 eps group." ::= { g8031EpsGroupEntry 14} g8031EpsGroupRequestSignal OBJECT-TYPE SYNTAX INTEGER{null(0), normal(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Request signal of the G.8031 eps group." ::= { g8031EpsGroupEntry 15} g8031EpsGroupBridgeSignal OBJECT-TYPE SYNTAX INTEGER{null(0), normal(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge signal of the G.8031 eps group." ::= { g8031EpsGroupEntry 16} g8031EpsGroupAPSVid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vid of aps packet for the G.8031 eps group." ::= { g8031EpsGroupEntry 17} g8031EpsGroupDFOPState OBJECT-TYPE SYNTAX INTEGER{not-in-defect(1), b-bit-mismatch(5), r-bit-mismatch(8), aps-on-working(56)} MAX-ACCESS read-only STATUS current DESCRIPTION "DFOP of the G.8031 eps group." ::= { g8031EpsGroupEntry 18} g8031EpsGroupInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF G8031EpsGroupInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of instance proceted by G.8031 eps group." ::= { g8031 2 } g8031EpsGroupInstanceEntry OBJECT-TYPE SYNTAX G8031EpsGroupInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of instance proceted by G.8031 eps group." INDEX { g8031EpsGroupId, g8031EpsGroupInstanceId } ::= { g8031EpsGroupInstanceTable 1 } G8031EpsGroupInstanceEntry ::= SEQUENCE { g8031EpsGroupInstanceId Integer32, g8031EpsGroupInstanceRowStatus RowStatus } g8031EpsGroupInstanceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of instance protected by G.8031 eps group." ::= { g8031EpsGroupInstanceEntry 1 } g8031EpsGroupInstanceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the G8031EpsGroupInstanceEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { g8031EpsGroupInstanceEntry 2 } -- Sub Module: g.8032 -- g8032: eps group g8032RingTable OBJECT-TYPE SYNTAX SEQUENCE OF G8032RingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of G.8032 ring." ::= { g8032 1 } g8032RingEntry OBJECT-TYPE SYNTAX G8032RingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of G.8032 ring." INDEX { g8032RingId } ::= { g8032RingTable 1 } G8032RingEntry ::= SEQUENCE { g8032RingId Integer32, g8032RingMajorRingId Integer32, g8032RingEastIfindex Integer32, g8032RingWestIfindex Integer32, g8032RingRowStatus RowStatus, g8032RingDomain OCTET STRING, g8032RingService OCTET STRING, g8032RingControlVlan Integer32, g8032RingWTR Integer32, g8032RingHoldOff Integer32, g8032RingGuard Integer32, g8032RingRole INTEGER, g8032RingRpl INTEGER, g8032RingCurrentStatus INTEGER, g8032RingEastStatus INTEGER, g8032RingWestStatus INTEGER, g8032RingCurrentEvent INTEGER, g8032RingProtectInstance OCTET STRING, g8032RingProtectTrigger INTEGER, g8032RingFlushRRPPState INTEGER, g8032RingFlushRRPPVlan Integer32, g8032RingFlushRRPPCount Integer32 } g8032RingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of G.8032 ring." ::= { g8032RingEntry 1 } g8032RingMajorRingId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Major ring id of G.8032 ring." ::= { g8032RingEntry 2 } g8032RingEastIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "East interface index of G.8032 ring." ::= { g8032RingEntry 3 } g8032RingWestIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "West interface index of G.8032 ring." ::= { g8032RingEntry 4 } g8032RingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the g8032RingEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { g8032RingEntry 5 } g8032RingDomain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm domain of the G.8032 ring." ::= { g8032RingEntry 6 } g8032RingService OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Cfm service id of the G.8032 ring." ::= { g8032RingEntry 7 } g8032RingControlVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Control vlan of the G.8032 ring." ::= { g8032RingEntry 8} g8032RingWTR OBJECT-TYPE SYNTAX Integer32(5..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Wait to restore timer of the G.8032 ring. (minutes)" DEFVAL {5} ::= { g8032RingEntry 9 } g8032RingHoldOff OBJECT-TYPE SYNTAX Integer32(0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Hold off timer of the G.8032 ring. Value in multiples of 100. (milliseconds)" DEFVAL {0} ::= { g8032RingEntry 10 } g8032RingGuard OBJECT-TYPE SYNTAX Integer32(100..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "Guard timer of the G.8032 ring. Value in multiples of 100. (milliseconds)" DEFVAL {500} ::= { g8032RingEntry 11 } g8032RingRole OBJECT-TYPE SYNTAX INTEGER {owner(1), non-owner(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Role of the G.8032 ring." ::= { g8032RingEntry 12 } g8032RingRpl OBJECT-TYPE SYNTAX INTEGER {none(0), east(1), west(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Rpl(ring protection link) of the G.8032 ring." ::= { g8032RingEntry 13 } g8032RingCurrentStatus OBJECT-TYPE SYNTAX INTEGER {init(0), idle(1), protection(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Current Status of the G.8032 ring." ::= { g8032RingEntry 14 } g8032RingEastStatus OBJECT-TYPE SYNTAX INTEGER {block(1), forward(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the east interface." ::= { g8032RingEntry 15 } g8032RingWestStatus OBJECT-TYPE SYNTAX INTEGER {block(1), forward(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the west interface." ::= { g8032RingEntry 16 } g8032RingCurrentEvent OBJECT-TYPE SYNTAX INTEGER {nr(0), nr-rb(1), wtr(2), wtr-exp(3), remote-sf(4), local-clear-sf(5), local-sf(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Event of the G.8032 ring." ::= { g8032RingEntry 17 } g8032RingProtectInstance OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The protect instance of the G.8032 ging." ::= { g8032RingEntry 18 } g8032RingProtectTrigger OBJECT-TYPE SYNTAX INTEGER {all(0), ccm(1), pyh(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The protect trigger of the G.8032 ging." ::= { g8032RingEntry 19 } g8032RingFlushRRPPState OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The flush RRPP state of the G.8032 ging." ::= { g8032RingEntry 20 } g8032RingFlushRRPPVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flush RRPP Vlan of the G.8032 ging." ::= { g8032RingEntry 21 } g8032RingFlushRRPPCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flush RRPP count of the G.8032 ging." ::= { g8032RingEntry 22 } g8032RingInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF G8032RingInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of instance proceted by G.8032 ring." ::= { g8032 2 } g8032RingInstanceEntry OBJECT-TYPE SYNTAX G8032RingInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of instance proceted by G.8032 ring." INDEX { g8032RingId, g8032RingInstanceId } ::= { g8032RingInstanceTable 1 } G8032RingInstanceEntry ::= SEQUENCE { g8032RingInstanceId Integer32, g8032RingInstanceRowStatus RowStatus } g8032RingInstanceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Id of instance protected by G.8032 ring." ::= { g8032RingInstanceEntry 1 } g8032RingInstanceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of the G8032RingInstanceEntry row. 1 means Active 4 means CreateAndGo 6 means Destroy." ::= { g8032RingInstanceEntry 2 } voiceVlanEnableVlan OBJECT-TYPE SYNTAX Integer32 (0|2..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify voice VLAN from 2 to 4094. 0 means voice vlan is disabled." DEFVAL { 0 } ::= { voiceVlan 1 } voiceVlanEnableSecurity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specify voice VLAN security mode,1 will enable it,2 will disable it." ::= { voiceVlan 2 } voiceVlanCOS OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the COS of voice vlan." DEFVAL { 5 } ::= { voiceVlan 3 } voiceVlanEnableInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF VoiceVlanEnableInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The voice vlan enable interface table." ::= { voiceVlan 4 } voiceVlanEnableInterfaceEntry OBJECT-TYPE SYNTAX VoiceVlanEnableInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The voice vlan enable interface table entry." INDEX { ifIndex } ::= { voiceVlanEnableInterfaceTable 1 } VoiceVlanEnableInterfaceEntry ::= SEQUENCE { voiceVlanEnableInterfaceStatus TruthValue } voiceVlanEnableInterfaceStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable voice vlan on port,1 will enable it,2 will disable it." ::= { voiceVlanEnableInterfaceEntry 1 } voiceVlanOuiEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VoiceVlanOuiEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table description." ::= { voiceVlan 5 } voiceVlanOuiEntryEntry OBJECT-TYPE SYNTAX VoiceVlanOuiEntryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry description." INDEX { voiceVlanOuiEntryId } ::= { voiceVlanOuiEntryTable 1 } VoiceVlanOuiEntryEntry ::= SEQUENCE { voiceVlanOuiEntryId Integer32, voiceVlanOuiEntryMac MacAddress, voiceVlanOuiEntryMask MacAddress, voiceVlanOuiEntryDescription OCTET STRING, voiceVlanOuiEntryRowstatus RowStatus } voiceVlanOuiEntryId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "OUI_id Desc." ::= { voiceVlanOuiEntryEntry 1 } voiceVlanOuiEntryMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MAC Desc." ::= { voiceVlanOuiEntryEntry 2 } voiceVlanOuiEntryMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MASK Desc." ::= { voiceVlanOuiEntryEntry 3 } voiceVlanOuiEntryDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "description description." ::= { voiceVlanOuiEntryEntry 4 } voiceVlanOuiEntryRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { voiceVlanOuiEntryEntry 5 } iviRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IviRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for IVI route." ::= { ivi 1 } iviRouteEntry OBJECT-TYPE SYNTAX IviRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of IVI route." INDEX { iviRouteIndex } ::= { iviRouteTable 1 } IviRouteEntry ::= SEQUENCE { iviRouteIndex Integer32, iviRouteIpv6address OCTET STRING, iviRouteIpv6addressMask Integer32, iviRouteIpv4address IpAddress, iviRouteIpv4addressMask Integer32, iviRouteRowStatus RowStatus } iviRouteIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IVI entry index." DEFVAL { 0 } ::= { iviRouteEntry 1 } iviRouteIpv6address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The ipv6 address of IVI entry." ::= { iviRouteEntry 2 } iviRouteIpv6addressMask OBJECT-TYPE SYNTAX Integer32 (8..96) MAX-ACCESS read-create STATUS current DESCRIPTION "The ipv6 prefix length." DEFVAL { 0 } ::= { iviRouteEntry 3 } iviRouteIpv4address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The ipv4 address of IVI entry" ::= { iviRouteEntry 4 } iviRouteIpv4addressMask OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The ipv4 prefix length." DEFVAL { 0 } ::= { iviRouteEntry 5 } iviRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row. Now only realize CreateAndGo(4) and Destroy(6) and Active(1)." ::= { iviRouteEntry 6 } iviInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IviInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for IVI enable status." ::= { ivi 2 } iviInterfaceEntry OBJECT-TYPE SYNTAX IviInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of IVI enable status." INDEX { ifIndex } ::= { iviInterfaceTable 1 } IviInterfaceEntry ::= SEQUENCE { iviInterfaceStatus TruthValue } iviInterfaceStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "IVI status on the interface." ::= { iviInterfaceEntry 1 } -- Sub Module: L2 protocol -- -- L2 protocol tunnel Enable -- l2ProtocolTunnelEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable L2ProtocolTunnel." ::= { l2protocol 1 } -- -- L2 protocol tunnel destnation Mac set -- l2ProtocolTunnelDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Tunnel's destination MAC address, could be 0100.0CCD.CDD0-D2 or 010F.E200.0003. The default dest MAC address is 0100.0CCD.CDD0." ::= { l2protocol 2 } l2ProtocolTunnelCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This node is used to configure layer2 protocol default COS values." DEFVAL { 0 } ::= { l2protocol 3 } -- -- L2 protocol Mac set -- l2ProtocolMacTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of the destination MAC 0180.c2xx.xxxx." ::= { l2protocol 5 } l2ProtocolMacEntry OBJECT-TYPE SYNTAX L2ProtocolMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the destination MAC table." INDEX { l2ProtocolMacIndex } ::= { l2ProtocolMacTable 1 } L2ProtocolMacEntry ::= SEQUENCE { l2ProtocolMacIndex Integer32, l2ProtocolMac MacAddress, l2ProtocolMacMask MacAddress, l2ProtocolMacRowstatus RowStatus } l2ProtocolMacIndex OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the mac entry. The value of index plus 1 equals the value in cli." ::= { l2ProtocolMacEntry 1 } l2ProtocolMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "L2 protocol MAC address, should be 0180.C200.0000-0180.C2FF.FFFF." ::= { l2ProtocolMacEntry 2 } l2ProtocolMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "L2 protocol MAC mask, should be FFFF.FF00.0000-FFFF.FFFF.FFFF." ::= { l2ProtocolMacEntry 3 } l2ProtocolMacRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active." ::= { l2ProtocolMacEntry 4 } -- -- L2 protocol tunnel Mac set -- l2ProtocolTunnelMacTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of mac tunnel enable or not." ::= { l2protocol 6 } l2ProtocolTunnelMacEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of mac tunnel enable or not." INDEX { interfaceIndex, l2ProtocolMacIndex} ::= { l2ProtocolTunnelMacTable 1 } L2ProtocolTunnelMacEntry ::= SEQUENCE { l2ProtocolTunnelMacType INTEGER, l2ProtocolTunnelMacEvcName OCTET STRING, l2ProtocolTunnelMacRowstatus RowStatus } l2ProtocolTunnelMacType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelMacEntry 1 } l2ProtocolTunnelMacEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelMacEntry 2 } l2ProtocolTunnelMacRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelMacEntry 3 } -- -- L2 protocol tunnel dot1x set -- l2ProtocolTunnelDot1xTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelDot1xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Dot1x tunnel enable or not." ::= { l2protocol 7 } l2ProtocolTunnelDot1xEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelDot1xEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Dot1x tunnel enable or not." INDEX { interfaceIndex} ::= { l2ProtocolTunnelDot1xTable 1 } L2ProtocolTunnelDot1xEntry ::= SEQUENCE { l2ProtocolTunnelDot1xType INTEGER, l2ProtocolTunnelDot1xEvcName OCTET STRING, l2ProtocolTunnelDot1xRowstatus RowStatus } l2ProtocolTunnelDot1xType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelDot1xEntry 1 } l2ProtocolTunnelDot1xEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelDot1xEntry 2 } l2ProtocolTunnelDot1xRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelDot1xEntry 3 } -- -- L2 protocol tunnel Slow Proto set -- l2ProtocolTunnelSlowProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelSlowProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of slow protocol tunnel enable or not." ::= { l2protocol 8 } l2ProtocolTunnelSlowProtoEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelSlowProtoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of slow proto tunnel enable or not." INDEX { interfaceIndex} ::= { l2ProtocolTunnelSlowProtoTable 1 } L2ProtocolTunnelSlowProtoEntry ::= SEQUENCE { l2ProtocolTunnelSlowProtoType INTEGER, l2ProtocolTunnelSlowProtoEvcName OCTET STRING, l2ProtocolTunnelSlowProtoRowstatus RowStatus } l2ProtocolTunnelSlowProtoType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelSlowProtoEntry 1 } l2ProtocolTunnelSlowProtoEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelSlowProtoEntry 2 } l2ProtocolTunnelSlowProtoRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelSlowProtoEntry 3 } -- -- L2 protocol tunnel Stp set -- l2ProtocolTunnelStpTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelStpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Stp tunnel enable or not." ::= { l2protocol 9 } l2ProtocolTunnelStpEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelStpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Stp tunnel enable or not." INDEX { interfaceIndex} ::= { l2ProtocolTunnelStpTable 1 } L2ProtocolTunnelStpEntry ::= SEQUENCE { l2ProtocolTunnelStpType INTEGER, l2ProtocolTunnelStpEvcName OCTET STRING, l2ProtocolTunnelStpRowstatus RowStatus } l2ProtocolTunnelStpType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelStpEntry 1 } l2ProtocolTunnelStpEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelStpEntry 2 } l2ProtocolTunnelStpRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelStpEntry 3 } -- -- L2 protocol tunnel Cfm set -- l2ProtocolTunnelCfmTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Cfm tunnel enable or not." ::= { l2protocol 10 } l2ProtocolTunnelCfmEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of Cfm tunnel enable or not." INDEX { interfaceIndex} ::= { l2ProtocolTunnelCfmTable 1 } L2ProtocolTunnelCfmEntry ::= SEQUENCE { l2ProtocolTunnelCfmType INTEGER, l2ProtocolTunnelCfmEvcName OCTET STRING, l2ProtocolTunnelCfmRowstatus RowStatus } l2ProtocolTunnelCfmType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelCfmEntry 1 } l2ProtocolTunnelCfmEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelCfmEntry 2 } l2ProtocolTunnelCfmRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelCfmEntry 3 } -- -- L2 protocol tunnel uplink enable -- l2ProtocolTunnelUplinkTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelUplinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of uplink enable or not." ::= { l2protocol 11 } l2ProtocolTunnelUplinkEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelUplinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of uplink enable or not." INDEX { interfaceIndex} ::= { l2ProtocolTunnelUplinkTable 1 } L2ProtocolTunnelUplinkEntry ::= SEQUENCE { l2ProtocolTunnelUplinkEnable INTEGER, l2ProtocolTunnelUplinkRowstatus RowStatus } l2ProtocolTunnelUplinkEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "l2protocol uplink enable or not." DEFVAL { disable } ::= { l2ProtocolTunnelUplinkEntry 1 } l2ProtocolTunnelUplinkRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelUplinkEntry 2 } -- -- L2 protocol Full-Mac set -- l2ProtocolFullMacTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolFullMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of the all destination MAC." ::= { l2protocol 12 } l2ProtocolFullMacEntry OBJECT-TYPE SYNTAX L2ProtocolFullMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the destination MAC table." INDEX { l2ProtocolFullMacIndex } ::= { l2ProtocolFullMacTable 1 } L2ProtocolFullMacEntry ::= SEQUENCE { l2ProtocolFullMacIndex Integer32, l2ProtocolFullMac MacAddress, l2ProtocolFullMacRowstatus RowStatus } l2ProtocolFullMacIndex OBJECT-TYPE SYNTAX Integer32 (0) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the full-mac entry. The value is 0 always" ::= { l2ProtocolFullMacEntry 1 } l2ProtocolFullMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "L2 protocol MAC address, including all MAC addresses." ::= { l2ProtocolFullMacEntry 2 } l2ProtocolFullMacRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active." ::= { l2ProtocolFullMacEntry 3 } -- -- L2 protocol tunnel Full-Mac set -- l2ProtocolTunnelFullMacTable OBJECT-TYPE SYNTAX SEQUENCE OF L2ProtocolTunnelFullMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of full-mac tunnel enable or not." ::= { l2protocol 13 } l2ProtocolTunnelFullMacEntry OBJECT-TYPE SYNTAX L2ProtocolTunnelFullMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation of full-mac tunnel enable or not." INDEX { interfaceIndex } ::= { l2ProtocolTunnelFullMacTable 1 } L2ProtocolTunnelFullMacEntry ::= SEQUENCE { l2ProtocolTunnelFullMacType INTEGER, l2ProtocolTunnelFullMacEvcName OCTET STRING, l2ProtocolTunnelFullMacRowstatus RowStatus } l2ProtocolTunnelFullMacType OBJECT-TYPE SYNTAX INTEGER { peer(0), tunnel(1), discard(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of l2 protocol action. 0 peer. 1 tunnel. 2 discard." DEFVAL { peer } ::= { l2ProtocolTunnelFullMacEntry 1 } l2ProtocolTunnelFullMacEvcName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the evc entry." ::= { l2ProtocolTunnelFullMacEntry 2 } l2ProtocolTunnelFullMacRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active. In this node when Destroy the entry the default type peer will be used." ::= { l2ProtocolTunnelFullMacEntry 3 } -- Sub Module: loopback detect loopbackDetectIfTable OBJECT-TYPE SYNTAX SEQUENCE OF LoopbackDetectIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure loopback detection on an interface." ::= { loopbackDetect 1 } loopbackDetectIfEntry OBJECT-TYPE SYNTAX LoopbackDetectIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of loopbackDetectIfTable." INDEX { loopbackDetectIfIndex } ::= { loopbackDetectIfTable 1 } LoopbackDetectIfEntry ::= SEQUENCE { loopbackDetectIfIndex Integer32, loopbackDetectEnable INTEGER, loopbackDetectAction INTEGER, loopbackDetectStatus INTEGER } loopbackDetectIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index." ::= { loopbackDetectIfEntry 1 } loopbackDetectEnable OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the loopback detect on a port.The meanings of the values are: enable(1);disable(2)." DEFVAL { disable } ::= { loopbackDetectIfEntry 2 } loopbackDetectAction OBJECT-TYPE SYNTAX INTEGER {shutdown(1), trap(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the action of the loopback detection.The meanings of the values are: shutdown(1);trap(2)." DEFVAL { trap } ::= { loopbackDetectIfEntry 3 } loopbackDetectStatus OBJECT-TYPE SYNTAX INTEGER {trap(1), shutdown(2), normal(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Get the status of the loopback detection.The meanings of the values are: trap(1);shutdown(2);normal(3)." DEFVAL { normal } ::= { loopbackDetectIfEntry 4 } loopbackDetectPktInterval OBJECT-TYPE SYNTAX Integer32 (1..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This node is used to configure loopback detection packet interval." DEFVAL { 5 } ::= { loopbackDetect 2 } loopbackDetectTrap OBJECT IDENTIFIER ::= { loopbackDetect 1000 } loopbackDetectStatusNotify NOTIFICATION-TYPE OBJECTS { loopbackDetectIfIndex, loopbackDetectStatus } STATUS current DESCRIPTION "This trap will be generated when loopback status changed on an interface." ::= {loopbackDetectTrap 1} -- Ipsla MIB Objects ipslaCtrlAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF IpslaCtrlAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic configuration for ipsla" ::= { ipsla 1 } ipslaCtrlAdminEntry OBJECT-TYPE SYNTAX IpslaCtrlAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A base list of objects that define an ipsla object" INDEX { ipslaCtrlAdminIndex } ::= { ipslaCtrlAdminTable 1 } IpslaCtrlAdminEntry ::= SEQUENCE { ipslaCtrlAdminIndex Integer32, ipslaCtrlAdminDesc DisplayString, ipslaCtrlAdminType Integer32, ipslaCtrlAdminThreshold Integer32, ipslaCtrlAdminFrequency Integer32, ipslaCtrlAdminTimeout Integer32, ipslaCtrlAdminInterval Integer32, ipslaCtrlAdminPktsPerTest Integer32, ipslaCtrlAdminTargetAddress OCTET STRING, ipslaCtrlAdminSourceAddress OCTET STRING, ipslaCtrlAdminSourceInterface OCTET STRING, ipslaCtrlAdminStatus RowStatus } ipslaCtrlAdminIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ID of ipsla entry" ::= { ipslaCtrlAdminEntry 1 } ipslaCtrlAdminDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string which is used to describe an ipsla entry. and will be inserted into trap notifications." DEFVAL { "" } ::= { ipslaCtrlAdminEntry 2 } ipslaCtrlAdminThreshold OBJECT-TYPE SYNTAX Integer32 (1..4800000) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the threshold value in millisecond for each icmp response" DEFVAL { 5000 } ::= { ipslaCtrlAdminEntry 4 } ipslaCtrlAdminFrequency OBJECT-TYPE SYNTAX Integer32 (1..4800) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the frequency value in second for each test" DEFVAL { 60 } ::= { ipslaCtrlAdminEntry 5 } ipslaCtrlAdminTimeout OBJECT-TYPE SYNTAX Integer32 (1..4800) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the timeout value in second for each icmp response" DEFVAL { 5 } ::= { ipslaCtrlAdminEntry 6 } ipslaCtrlAdminInterval OBJECT-TYPE SYNTAX Integer32 (1..4800) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the interval value in second for two icmp request in a test" DEFVAL { 6 } ::= { ipslaCtrlAdminEntry 7 } ipslaCtrlAdminPktsPerTest OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the number of trasmitted icmp request in a test" DEFVAL { 3 } ::= { ipslaCtrlAdminEntry 8 } ipslaCtrlAdminTargetAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the destination address for icmp request" ::= { ipslaCtrlAdminEntry 9 } ipslaCtrlAdminSourceAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the source address for icmp request" ::= { ipslaCtrlAdminEntry 10 } ipslaCtrlAdminSourceInterface OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure the source interface for icmp request" ::= { ipslaCtrlAdminEntry 11 } ipslaCtrlAdminStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Description: The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active. 1 means Active 4 means CreateAndGo 6 means Destroy" ::= { ipslaCtrlAdminEntry 12 } -- ipsla icmp-echo Table ipslaEchoAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF IpslaEchoAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains icmp-echo specific definitions." ::= { ipsla 2 } ipslaEchoAdminEntry OBJECT-TYPE SYNTAX IpslaEchoAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for icmp-echo." INDEX { ipslaCtrlAdminIndex } ::= { ipslaEchoAdminTable 1 } IpslaEchoAdminEntry ::= SEQUENCE { ipslaEchoAdminDataSize Integer32, ipslaEchoAdminDataPattern OCTET STRING, ipslaEchoAdminTOS Integer32, ipslaEchoAdminTTL Integer32, ipslaEchoAdminFailPercent Integer32, ipslaEchoAdminVrfName DisplayString, ipslaEchoAdminTestStatsNum Integer32, ipslaEchoAdminPktStatsNum Integer32 } ipslaEchoAdminDataSize OBJECT-TYPE SYNTAX Integer32 (0..8100) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure size of payload in icmp packet" DEFVAL { 28 } ::= { ipslaEchoAdminEntry 1 } ipslaEchoAdminDataPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the pattern (hex string) of content in icmp payload" DEFVAL { "ABCDABCD" } ::= { ipslaEchoAdminEntry 2 } ipslaEchoAdminTOS OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the value of tos in icmp packet" DEFVAL { 0 } ::= { ipslaEchoAdminEntry 3 } ipslaEchoAdminTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the value of ttl in icmp packet" DEFVAL { 64 } ::= { ipslaEchoAdminEntry 4 } ipslaEchoAdminFailPercent OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the failure percent for a test" DEFVAL { 100 } ::= { ipslaEchoAdminEntry 5 } ipslaEchoAdminVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the vrf for ipsla entry" DEFVAL { "" } ::= { ipslaEchoAdminEntry 6 } ipslaEchoAdminTestStatsNum OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the recorded number of test statistics for a ipsla entry" DEFVAL { 5 } ::= { ipslaEchoAdminEntry 7 } ipslaEchoAdminPktStatsNum OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the recorded number of packet statistics for a ipsla entry" DEFVAL { 50 } ::= { ipslaEchoAdminEntry 8 } -- Schedule Administration Table ipslaScheduleAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF IpslaScheduleAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ipsla scheduling specific definitions." ::= { ipsla 3 } ipslaScheduleAdminEntry OBJECT-TYPE SYNTAX IpslaScheduleAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for the scheduling of ipsla." INDEX { ipslaCtrlAdminIndex } ::= { ipslaScheduleAdminTable 1 } IpslaScheduleAdminEntry ::= SEQUENCE { ipslaScheduleAdminStatus Integer32 } ipslaScheduleAdminStatus OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure to enable the ipsla entry: 0 means disable 1 means enable" DEFVAL{0} ::= { ipslaScheduleAdminEntry 1 } -- Test show Table ipslaTestStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpslaTestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The test statistics table" ::= { ipsla 4 } ipslaTestStatsEntry OBJECT-TYPE SYNTAX IpslaTestStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that describe results for test statistics rows." INDEX { ipslaTestEntryId, ipslaTestStatsIndex } ::= { ipslaTestStatsTable 1 } IpslaTestStatsEntry ::= SEQUENCE { ipslaTestEntryId Integer32, ipslaTestStatsIndex Integer32, ipslaTestTransmitted Counter32, ipslaTestReceived Counter32, ipslaTestOverthreshold Counter32, ipslaTestRttMax Integer32, ipslaTestRttMin Integer32, ipslaTestRttAvg Integer32, ipslaTestLastTransmitted DateAndTime, ipslaTestPktLossRatio Integer32, ipslaTestResult Integer32 } ipslaTestEntryId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "ID of ipsla entry" ::= { ipslaTestStatsEntry 1 } ipslaTestStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the test in the results" ::= { ipslaTestStatsEntry 2 } ipslaTestTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the number of packets transmitted in the test" ::= { ipslaTestStatsEntry 3 } ipslaTestReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the number of packets received in the test" ::= { ipslaTestStatsEntry 4 } ipslaTestOverthreshold OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the number of overthreshold packets received in the test" ::= { ipslaTestStatsEntry 5 } ipslaTestRttMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the max value of RTT (Round Trip Time) among all received packet in a test" ::= { ipslaTestStatsEntry 6 } ipslaTestRttMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the minimum value of RTT (Round Trip Time) among all received packet in a test" ::= { ipslaTestStatsEntry 7 } ipslaTestRttAvg OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the average value of RTT (Round Trip Time) among all received packet in a test" ::= { ipslaTestStatsEntry 8 } ipslaTestLastTransmitted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Show send time of last packet in a test" ::= { ipslaTestStatsEntry 9 } ipslaTestPktLossRatio OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Show packet loss ratio of a test" ::= { ipslaTestStatsEntry 10 } ipslaTestResult OBJECT-TYPE SYNTAX Integer32(1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Show the result of a test: 1 means success 2 means failure" ::= { ipslaTestStatsEntry 11 } -- pkt show Table ipslaPktStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpslaPktStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The packet statistics table " ::= { ipsla 5 } ipslaPktStatsEntry OBJECT-TYPE SYNTAX IpslaPktStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that describe results for packet statistics rows." INDEX { ipslaPktEntryId, ipslaPktStatsIndex } ::= { ipslaPktStatsTable 1 } IpslaPktStatsEntry ::= SEQUENCE { ipslaPktEntryId Integer32, ipslaPktStatsIndex Integer32, ipslaPktTestId Integer32, ipslaPktIndex Integer32, ipslaPktRtt Integer32, ipslaPktResult Integer32, ipslaPktSendTime DateAndTime } ipslaPktEntryId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of ipsla entry" ::= { ipslaPktStatsEntry 1 } ipslaPktStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the packet in the results" ::= { ipslaPktStatsEntry 2 } ipslaPktTestId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the ID of test which the packet is belong to " ::= { ipslaPktStatsEntry 3 } ipslaPktIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the index of packet in the test" ::= { ipslaPktStatsEntry 4 } ipslaPktRtt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the RTT of the packet" ::= { ipslaPktStatsEntry 5 } ipslaPktResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Show the result of the packet: 0 means timeout 1 means success 3 means sendfail" ::= { ipslaPktStatsEntry 6 } ipslaPktSendTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Show the time of the packet transmitted" ::= { ipslaPktStatsEntry 7 } ipslaTrapEnable OBJECT-TYPE SYNTAX BITS { testfailure(0), packettimeout(1), testsuccess(2), overthreshold(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the trap of special type" ::= { ipsla 6 } -- trap Table ipslaTrap OBJECT IDENTIFIER ::= { ipsla 7 } ipslaTestFailure NOTIFICATION-TYPE OBJECTS { ipslaCtrlAdminIndex, ipslaCtrlAdminDesc, ipslaCtrlAdminTargetAddress, ipslaPktTestId, ipslaTestTransmitted, ipslaTestReceived, ipslaTestOverthreshold, ipslaTestRttMax, ipslaTestRttMin, ipslaTestRttAvg, ipslaTestLastTransmitted, ipslaTestPktLossRatio, ipslaEchoAdminFailPercent } STATUS current DESCRIPTION "Trap for a failed test" ::= { ipslaTrap 1 } ipslaPktTimeout NOTIFICATION-TYPE OBJECTS { ipslaCtrlAdminIndex, ipslaCtrlAdminDesc, ipslaCtrlAdminTargetAddress, ipslaPktTestId, ipslaPktIndex, ipslaCtrlAdminTimeout } STATUS current DESCRIPTION "Trap for a timeout icmp request" ::= { ipslaTrap 2 } ipslaTestSuccess NOTIFICATION-TYPE OBJECTS { ipslaCtrlAdminIndex, ipslaCtrlAdminDesc, ipslaCtrlAdminTargetAddress, ipslaPktTestId, ipslaTestTransmitted, ipslaTestReceived, ipslaTestOverthreshold, ipslaTestRttMax, ipslaTestRttMin, ipslaTestRttAvg, ipslaTestLastTransmitted, ipslaTestPktLossRatio, ipslaEchoAdminFailPercent } STATUS current DESCRIPTION "Trap for a successful test" ::= { ipslaTrap 3 } ipslaPktOverthreshold NOTIFICATION-TYPE OBJECTS { ipslaCtrlAdminIndex, ipslaCtrlAdminDesc, ipslaCtrlAdminTargetAddress, ipslaPktTestId, ipslaPktIndex, ipslaCtrlAdminThreshold, ipslaPktRtt } STATUS current DESCRIPTION "Trap for a overthreshold icmp response" ::= { ipslaTrap 4 } END