MDS-IF-IEEE80211-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Integer32,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    DisplayString,
    TruthValue
        FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    ifIndex
        FROM IF-MIB
    mdsInterfaces
        FROM MDS-ORBIT-SMI-MIB;

mdsIfDot11MIB MODULE-IDENTITY
    LAST-UPDATED "201805160000Z" -- May 16, 2018
    ORGANIZATION
        "GE MDS LLC
        http://www.gemds.com"
    CONTACT-INFO
        "T 1-800-474-0694 (Toll Free in North America)
         T 585-242-9600
         F 585-242-9620

         175 Science Parkway
         Rochester, New York 14620
         USA"
    DESCRIPTION
        "The MIB module to describe the IEEE802.11 interface."
    REVISION      "201805160000Z"
    DESCRIPTION
        "Updated conformance statments based on smilint."
    REVISION      "201410200000Z"
    DESCRIPTION
        "Removed hyphens from enumerations."
    REVISION      "201304260000Z"
    DESCRIPTION
        "Initial version."
    ::= { mdsInterfaces 2 }

mIfDot11MIBObjects OBJECT IDENTIFIER
    ::= { mdsIfDot11MIB 1 }

mIfDot11Config OBJECT IDENTIFIER
    ::= { mIfDot11MIBObjects 1 }

mIfDot11Status OBJECT IDENTIFIER
    ::= { mIfDot11MIBObjects 2 }

-- Textual Conventions
Byte ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION "xs:byte"
    SYNTAX      Integer32 (-128 .. 127)

UnsignedByte ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION "xs:unsignedByte"
    SYNTAX      Unsigned32 (0 .. 255)

UnsignedShort ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION "xs:unsignedShort"
    SYNTAX      Unsigned32 (0 .. 65535)

Ssid ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "32a"
    STATUS      current
    DESCRIPTION "IEEE802.11 Service Set Identifier"
    SYNTAX      OCTET STRING (SIZE (0..32))

MacString ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "20a"
    STATUS      current
    DESCRIPTION "MAC Identifier String"
    SYNTAX      OCTET STRING (SIZE (0..20))

-- Dot11 Status Objects
mIfDot11StatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MIfDot11StatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains status of IEEE802.11 interfaces. This table has
         a sparse dependent relationship on the ifTable. For each entry in
         this table, there exists an entry in the ifTable."
    ::= { mIfDot11Status 1 }

mIfDot11StatusEntry OBJECT-TYPE
    SYNTAX      MIfDot11StatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Each entry contains status of a cellular interface."
    INDEX   { ifIndex }
    ::= { mIfDot11StatusTable 1 }

MIfDot11StatusEntry ::=
    SEQUENCE {
        mIfDot11SerialNumber DisplayString,
        mIfDot11Mode INTEGER,
        mIfDot11TxPower UnsignedByte,
        mIfDot11Channel UnsignedByte,
        mIfDot11StationSsid Ssid,
        mIfDot11StationBssid MacString,
        mIfDot11StationRssi Byte,
        mIfDot11StationAuthenticated TruthValue,
        mIfDot11StationAuthorized TruthValue,
        mIfDot11StationInactive Unsigned32,
        mIfDot11StationRxbytes Unsigned32,
        mIfDot11StationRxpackets Unsigned32,
        mIfDot11StationTxbitrate UnsignedShort,
        mIfDot11StationTxbytes Unsigned32,
        mIfDot11StationTxpackets Unsigned32,
        mIfDot11StationTxfailed Unsigned32,
        mIfDot11StationTxretries Unsigned32,
        mIfDot11ModemType INTEGER
    }

mIfDot11SerialNumber OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "IEEE802.11 hardware serial number."
    ::= { mIfDot11StatusEntry 1 }

mIfDot11Mode OBJECT-TYPE
    SYNTAX      INTEGER {unknown(0),station(1),accessPoint(2), accessPointStation(3)}
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "IEEE802.11 operation mode."
    ::= { mIfDot11StatusEntry 2 }

mIfDot11TxPower OBJECT-TYPE
    SYNTAX      UnsignedByte
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "IEEE802.11 transmit power (dBm)."
    ::= { mIfDot11StatusEntry 3 }

mIfDot11Channel OBJECT-TYPE
    SYNTAX      UnsignedByte
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "IEEE802.11 channel"
    ::= { mIfDot11StatusEntry 4 }

-- Dot11 Station Status objects
mIfDot11StationSsid OBJECT-TYPE
    SYNTAX      Ssid
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "SSID of access point the unit is connected to"
    ::= { mIfDot11StatusEntry 5 }

mIfDot11StationBssid OBJECT-TYPE
    SYNTAX      MacString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BSSID of access point the unit is connected to"
    ::= { mIfDot11StatusEntry 6 }

mIfDot11StationRssi OBJECT-TYPE
    SYNTAX      Byte
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Received Signal Strength indicator (dBm)."
    ::= { mIfDot11StatusEntry 7 }

mIfDot11StationAuthenticated OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the station has been authenticated by the AP."
    ::= { mIfDot11StatusEntry 8 }

mIfDot11StationAuthorized OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the station has been authorized by the AP."
    ::= { mIfDot11StatusEntry 9 }

mIfDot11StationInactive OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the station is active."
    ::= { mIfDot11StatusEntry 10 }

mIfDot11StationRxbytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of bytes received."
    ::= { mIfDot11StatusEntry 11 }

mIfDot11StationRxpackets OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of packets received."
    ::= { mIfDot11StatusEntry 12 }

mIfDot11StationTxbitrate OBJECT-TYPE
    SYNTAX      UnsignedShort
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Current RF transmission bit rate."
    ::= { mIfDot11StatusEntry 13 }

mIfDot11StationTxbytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of bytes transmitted."
    ::= { mIfDot11StatusEntry 14 }

mIfDot11StationTxpackets OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of packets transmitted."
    ::= { mIfDot11StatusEntry 15 }

mIfDot11StationTxfailed OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of transmissions that failed."
    ::= { mIfDot11StatusEntry 16 }

mIfDot11StationTxretries OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of transmission retries."
    ::= { mIfDot11StatusEntry 17 }

mIfDot11ModemType OBJECT-TYPE
        SYNTAX      INTEGER {unknown(0),w51(1),w52(2)}
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Modem type."
        ::= { mIfDot11StatusEntry 18 }

-- Dot11 Status Access Point Status objects
mIfDot11StatusApTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MifDot11StatusApEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The access point table."
    ::= { mIfDot11Status 2 }

mIfDot11StatusApEntry OBJECT-TYPE
    SYNTAX      MifDot11StatusApEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The Access Point status entry."
    INDEX { ifIndex, mIfDot11ApSsid }
        ::= { mIfDot11StatusApTable 1 }

MifDot11StatusApEntry ::=
    SEQUENCE {
        mIfDot11ApSsid Ssid
    }

mIfDot11ApSsid OBJECT-TYPE
    SYNTAX      Ssid
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Current BSS SSID/Network name"
    ::= { mIfDot11StatusApEntry 1 }

-- Dot11 Status Access Point Client objects
mIfDot11StatusApClientTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MifDot11StatusApClientEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The access point client entry."
    ::= { mIfDot11Status 3 }

mIfDot11StatusApClientEntry OBJECT-TYPE
    SYNTAX      MifDot11StatusApClientEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The client connected to the AP."
    INDEX { ifIndex, mIfDot11ApSsid, mIfDot11ApClientMac }
        ::= { mIfDot11StatusApClientTable 1 }

MifDot11StatusApClientEntry ::=
    SEQUENCE {
        mIfDot11ApClientMac MacString,
        mIfDot11ApClientRssi Byte,
        mIfDot11ApClientAuthenticated TruthValue,
        mIfDot11ApClientAuthorized TruthValue,
        mIfDot11ApClientInactive Unsigned32,
        mIfDot11ApClientRxbytes Unsigned32,
        mIfDot11ApClientRxpackets Unsigned32,
        mIfDot11ApClientTxbitrate UnsignedShort,
        mIfDot11ApClientTxbytes Unsigned32,
        mIfDot11ApClientTxpackets Unsigned32,
        mIfDot11ApClientTxfailed Unsigned32,
        mIfDot11ApClientTxretries Unsigned32
    }

mIfDot11ApClientMac OBJECT-TYPE
    SYNTAX      MacString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The client MAC address."
    ::= { mIfDot11StatusApClientEntry 1 }

mIfDot11ApClientRssi OBJECT-TYPE
    SYNTAX      Byte
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The client RSSI."
    ::= { mIfDot11StatusApClientEntry 2 }

mIfDot11ApClientAuthenticated OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the client is authenticated."
    ::= { mIfDot11StatusApClientEntry 3 }

mIfDot11ApClientAuthorized OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the client is authorized."
    ::= { mIfDot11StatusApClientEntry 4 }

mIfDot11ApClientInactive OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Whether the client is inactive."
    ::= { mIfDot11StatusApClientEntry 5 }

mIfDot11ApClientRxbytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of bytes received from the client."
    ::= { mIfDot11StatusApClientEntry 6 }

mIfDot11ApClientRxpackets OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of packets received from the client."
    ::= { mIfDot11StatusApClientEntry 7 }

mIfDot11ApClientTxbitrate OBJECT-TYPE
    SYNTAX      UnsignedShort
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Transmission bit rate at which the client is connected to AP."
    ::= { mIfDot11StatusApClientEntry 8 }

mIfDot11ApClientTxbytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of bytes transmitted to the client."
    ::= { mIfDot11StatusApClientEntry 9 }

mIfDot11ApClientTxpackets OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of packets transmitted to the client."
    ::= { mIfDot11StatusApClientEntry 10 }

mIfDot11ApClientTxfailed OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of transmissions to the client that failed."
    ::= { mIfDot11StatusApClientEntry 11 }

mIfDot11ApClientTxretries OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of transmission retries to the client."
    ::= { mIfDot11StatusApClientEntry 12 }

-- conformance information
mdsIfDot11MIBConformance   OBJECT IDENTIFIER ::= { mdsIfDot11MIB 3 }
mdsIfDot11MIBCompliances OBJECT IDENTIFIER ::= { mdsIfDot11MIBConformance 1 }
mdsIfDot11MIBGroups      OBJECT IDENTIFIER ::= { mdsIfDot11MIBConformance 2 }

-- compliance statements
mIfDot11Compliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for SNMP entities that
            implement the MDS-IF-IEEE80211-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
            mIfDot11StatusCommonGroup,
            mIfDot11StatusStationGroup,
            mIfDot11StatusApGroup
        }
    ::= { mdsIfDot11MIBCompliances 1 }

-- units of conformance
mIfDot11StatusCommonGroup OBJECT-GROUP
    OBJECTS {
        mIfDot11SerialNumber,
        mIfDot11Mode,
        mIfDot11TxPower,
        mIfDot11Channel,
        mIfDot11ModemType
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        common IEEE802.11 interface status."
    ::= { mdsIfDot11MIBGroups 1 }

mIfDot11StatusStationGroup OBJECT-GROUP
    OBJECTS {
        mIfDot11StationSsid,
        mIfDot11StationRssi,
        mIfDot11StationBssid,
        mIfDot11StationAuthenticated,
        mIfDot11StationAuthorized,
        mIfDot11StationInactive,
        mIfDot11StationRxbytes,
        mIfDot11StationRxpackets,
        mIfDot11StationTxbitrate,
        mIfDot11StationTxbytes,
        mIfDot11StationTxpackets,
        mIfDot11StationTxfailed,
        mIfDot11StationTxretries
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        IEEE802.11 interface status in station mode."
    ::= { mdsIfDot11MIBGroups 2 }

mIfDot11StatusApGroup OBJECT-GROUP
    OBJECTS {
        mIfDot11ApSsid,
        mIfDot11ApClientMac,
        mIfDot11ApClientRssi,
        mIfDot11ApClientAuthenticated,
        mIfDot11ApClientAuthorized,
        mIfDot11ApClientInactive,
        mIfDot11ApClientRxbytes,
        mIfDot11ApClientRxpackets,
        mIfDot11ApClientTxbitrate,
        mIfDot11ApClientTxbytes,
        mIfDot11ApClientTxpackets,
        mIfDot11ApClientTxfailed,
        mIfDot11ApClientTxretries
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing information about
        IEEE802.11 interface status in Access Point mode."
    ::= { mdsIfDot11MIBGroups 3 }

END