-- **************************************************************************** -- -- Rack Information MIB -- Management Information Base for SNMP Network Management -- -- -- Copyright 2002,2016 Hewlett Packard Enterprise Development LP -- -- Hewlett Packard Enterprise shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HPE products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HPE required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQRACK-MIB DEFINITIONS ::= BEGIN IMPORTS compaq FROM CPQHOST-MIB DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 sysName FROM RFC1213-MIB cpqHoTrapFlags FROM CPQHOST-MIB TRAP-TYPE FROM RFC-1215 cpqHoOsType FROM CPQHOST-MIB cpqHoVersion FROM CPQHOST-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqRackInfo OBJECT IDENTIFIER ::= { compaq 22 } cpqRackMibRev OBJECT IDENTIFIER ::= { cpqRackInfo 1 } cpqRackComponent OBJECT IDENTIFIER ::= { cpqRackInfo 2 } cpqRackSysObjID OBJECT IDENTIFIER ::= { cpqRackInfo 3 } cpqRackEventInfo OBJECT IDENTIFIER ::= { cpqRackInfo 4 } cpqRackInterface OBJECT IDENTIFIER ::= { cpqRackComponent 1 } cpqRackAsset OBJECT IDENTIFIER ::= { cpqRackComponent 2 } cpqRackEnclosure OBJECT IDENTIFIER ::= { cpqRackComponent 3 } cpqRackServer OBJECT IDENTIFIER ::= { cpqRackComponent 4 } cpqRackPower OBJECT IDENTIFIER ::= { cpqRackComponent 5 } cpqRackNetwork OBJECT IDENTIFIER ::= { cpqRackComponent 6 } cpqRackHW OBJECT IDENTIFIER ::= { cpqRackComponent 7 } cpqRackErs OBJECT IDENTIFIER ::= { cpqRackComponent 8 } cpqRackOsCommon OBJECT IDENTIFIER ::= { cpqRackInterface 4 } cpqRackCommonEnclosure OBJECT IDENTIFIER ::= { cpqRackEnclosure 1 } cpqRackServerEnclosure OBJECT IDENTIFIER ::= { cpqRackEnclosure 2 } cpqRackPowerEnclosure OBJECT IDENTIFIER ::= { cpqRackEnclosure 3 } cpqRackServerBlade OBJECT IDENTIFIER ::= { cpqRackServer 1 } cpqRackServerNetworking OBJECT IDENTIFIER ::= { cpqRackServer 2 } cpqRackServerTempSensor OBJECT IDENTIFIER ::= { cpqRackServer 3 } cpqRackPowerSupply OBJECT IDENTIFIER ::= { cpqRackPower 1 } cpqRackNetConnector OBJECT IDENTIFIER ::= { cpqRackNetwork 1 } -- **************************************************************************** -- Rack Information MIB Revision -- ============================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackMibRev Group (1.3.6.1.4.1.232.22.1) -- -- Implementation of the MibRev group is mandatory for all Agents -- supporting the Rack Information MIB. -- -- An Agent conforming to this document will return a -- cpqRackMibRevMajor of one (1) and a cpqRackMibRevMinor of twenty one (21). -- -- Added trap cpqRackEnclosureManagerLinkDown (22083) -- Added trap cpqRackEnclosureManagerLinkUp (22084) -- Added group - cpqRackErs in cpqRackComponent -- Added trap cpqRackErsCommFailure (22085) -- Added trap cpqRackPowerSubsystemOverloadConditionRepaired (22086) -- -- **************************************************************************** cpqRackMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The major revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqRackMibRev 1 } cpqRackMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The minor revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cpqRackMibRev 2 } cpqRackMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), -- default degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition. This object represents the overall status of the rack information represented by this MIB." ::= { cpqRackMibRev 3 } -- **************************************************************************** -- Rack Information Common -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackInterface Group (1.3.6.1.4.1.232.22.2.1) -- cpqRackOsCommon Group (1.3.6.1.4.1.232.22.2.1.4) -- -- -- Implementation of the cpqRackOsCommon group is mandatory for all -- Agents that support the Rack Information MIB. -- -- **************************************************************************** cpqRackOsCommonPollFreq OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Management Agent's polling frequency. The frequency, in seconds, at which the Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance." ::= { cpqRackOsCommon 1 } -- **************************************************************************** -- Rack Asset Group -- ================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackAsset Group (1.3.6.1.4.1.232.22.2.2) -- -- The cpqRackAsset group contains the serial numbers, names, etc. of any -- Rack hardware that supports asset management. -- -- Implementation of the cpqRackAsset group is mandatory for all -- Agents that support the Rack Information MIB. -- -- **************************************************************************** -- **************************************************************************** -- Rack Asset Table -- ================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackAsset Group (1.3.6.1.4.1.232.22.2.2) -- cpqRackAssetTable (1.3.6.1.4.1.232.22.2.2.1) -- -- **************************************************************************** cpqRackAssetTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackAssetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack asset information." ::= { cpqRackAsset 1 } cpqRackAssetEntry OBJECT-TYPE SYNTAX CpqRackAssetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack asset description." INDEX { cpqRackAssetIndex } ::= { cpqRackAssetTable 1 } CpqRackAssetEntry ::= SEQUENCE { cpqRackAssetIndex INTEGER, cpqRackName DisplayString, cpqRackUid DisplayString, cpqRackSerialNum DisplayString, cpqRackTrapSequenceNum INTEGER, cpqRackHeight INTEGER, cpqRackWidth INTEGER, cpqRackDepth INTEGER } cpqRackAssetIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack table entry." ::= { cpqRackAssetEntry 1 } cpqRackName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The customer changeable identifier used to identify the entire rack. The string will be empty if the system does not report this function." ::= { cpqRackAssetEntry 2 } cpqRackUid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The rack unique identifier. The string will be empty if the rack does not report the UID or if it could not be determined." ::= { cpqRackAssetEntry 3 } cpqRackSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The rack serial number. The string will be empty if the rack does not report the serial number." ::= { cpqRackAssetEntry 4 } cpqRackTrapSequenceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trap sequence number for rack traps. This is used by the management application trap processing. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackAssetEntry 5 } cpqRackHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The internal height dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackAssetEntry 6 } cpqRackWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The internal width dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackAssetEntry 7 } cpqRackDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The internal depth dimension of the useable rack space expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackAssetEntry 8 } -- **************************************************************************** -- Rack Enclosure Chassis Group -- ============================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- -- The cpqRackEnclosure group contains the information about rack -- enclosures. -- -- **************************************************************************** -- **************************************************************************** -- Rack Common Enclosure Table -- =========================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureTable (1.3.6.1.4.1.232.22.2.3.1.1) -- -- **************************************************************************** cpqRackCommonEnclosureTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure information." ::= { cpqRackCommonEnclosure 1 } cpqRackCommonEnclosureEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure description." INDEX { cpqRackCommonEnclosureRack, cpqRackCommonEnclosureIndex } ::= { cpqRackCommonEnclosureTable 1 } CpqRackCommonEnclosureEntry ::= SEQUENCE { cpqRackCommonEnclosureRack INTEGER, cpqRackCommonEnclosureIndex INTEGER, cpqRackCommonEnclosureModel DisplayString, cpqRackCommonEnclosureAssetTag DisplayString, cpqRackCommonEnclosurePartNumber DisplayString, cpqRackCommonEnclosureSparePartNumber DisplayString, cpqRackCommonEnclosureSerialNum DisplayString, cpqRackCommonEnclosureFWRev DisplayString, cpqRackCommonEnclosureName DisplayString, cpqRackCommonEnclosureNeighborNamePrev DisplayString, cpqRackCommonEnclosureNeighborNameNext DisplayString, cpqRackCommonEnclosureHeight INTEGER, cpqRackCommonEnclosureWidth INTEGER, cpqRackCommonEnclosureDepth INTEGER, cpqRackCommonEnclosureTrapSequenceNum INTEGER, cpqRackCommonEnclosureCondition INTEGER, cpqRackCommonEnclosureHasServerBlades INTEGER, cpqRackCommonEnclosureHasPowerSupplies INTEGER, cpqRackCommonEnclosureHasNetConnectors INTEGER, cpqRackCommonEnclosureHasTempSensors INTEGER, cpqRackCommonEnclosureHasFans INTEGER, cpqRackCommonEnclosureHasFuses INTEGER, cpqRackCommonEnclosureMgmtUID INTEGER, cpqRackCommonEnclosureSerialNumPrev DisplayString, cpqRackCommonEnclosureSerialNumNext DisplayString, cpqRackCommonEnclosureAddress INTEGER, cpqRackCommonEnclosureProductId DisplayString, cpqRackCommonEnclosureProductIdPrev DisplayString, cpqRackCommonEnclosureProductIdNext DisplayString, cpqRackCommonEnclosureUUID DisplayString, cpqRackCommonEnclosureUUIDPrev DisplayString, cpqRackCommonEnclosureUUIDNext DisplayString, cpqRackCommonEnclosureHasManagers INTEGER } cpqRackCommonEnclosureRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureEntry 1 } cpqRackCommonEnclosureIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureEntry 2 } cpqRackCommonEnclosureModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The model name of the enclosure. The string will be empty if the enclosure does not report the model information." ::= { cpqRackCommonEnclosureEntry 3 } cpqRackCommonEnclosureAssetTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The customer changeable asset identifier of the enclosure. The string will be empty if the system does not report this function or if the asset tag has not been set." ::= { cpqRackCommonEnclosureEntry 4 } cpqRackCommonEnclosurePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the enclosure. The string will be empty if the enclosure does not report this function." ::= { cpqRackCommonEnclosureEntry 5 } cpqRackCommonEnclosureSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the enclosure. The string will be empty if the enclosure does not report this function." ::= { cpqRackCommonEnclosureEntry 6 } cpqRackCommonEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure. The string will be empty if the enclosure does not report the serial number." ::= { cpqRackCommonEnclosureEntry 7 } cpqRackCommonEnclosureFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The firmware revision of the enclosure. The string will be empty if the enclosure does not report the firmware revision or does not contain firmware." ::= { cpqRackCommonEnclosureEntry 8 } cpqRackCommonEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureEntry 9 } cpqRackCommonEnclosureNeighborNamePrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure immediately preceding or above this enclosure. The string will be empty if the neighbor enclosure name could not be determined or there is no enclosure preceding this one." ::= { cpqRackCommonEnclosureEntry 10 } cpqRackCommonEnclosureNeighborNameNext OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure immediately following or below this enclosure. The string will be empty if the neighbor enclosure name could not be determined or there is no enclosure following this one." ::= { cpqRackCommonEnclosureEntry 11 } cpqRackCommonEnclosureHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The height dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackCommonEnclosureEntry 12 } cpqRackCommonEnclosureWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The width dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackCommonEnclosureEntry 13 } cpqRackCommonEnclosureDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The depth dimension of the rack space taken by the enclosure expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackCommonEnclosureEntry 14 } cpqRackCommonEnclosureTrapSequenceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The trap sequence number for the enclosure. This is used by the management application trap processing. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackCommonEnclosureEntry 15 } cpqRackCommonEnclosureCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition of the enclosure. This is the aggregate of the temperature sensors, fans, and fuses within the enclosure. This value will be one of the following: other(1) No temperature sensors, fans, or fuses in the enclosure or the state could no be determined. ok(2) All temperature sensors, fans, and fuses are within the normal operating range. degraded(3) One or more temperature sensors, fans, or fuses are outside of the normal operating range. None are failed. failed(4) The temperature sensor exceeded the critical threshold value, a required fan has failed, or a fuse has been tripped. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent." ::= { cpqRackCommonEnclosureEntry 16 } cpqRackCommonEnclosureHasServerBlades OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure can contain server blades. This will be true(2) is the enclosure can house server blades. The cpqRackServerEnclosureTable will contain server enclosure specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackServerEnclosureTable to get complete information on the server enclosure." ::= { cpqRackCommonEnclosureEntry 17 } cpqRackCommonEnclosureHasPowerSupplies OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure can contain power supplies. This will be true(2) is the enclosure can house power supplies. The cpqRackEnclosurePowerTable will contain power enclosure specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackEnclosurePowerTable to get complete information on the power enclosure." ::= { cpqRackCommonEnclosureEntry 18 } cpqRackCommonEnclosureHasNetConnectors OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure contains network connectivity. This will be true(2) is the enclosure contains network connectivity. The cpqRackCommonEnclosureNetConnectorTable will contain network connectivity specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureNetConnectorTable to get complete information on the network connector enclosure." ::= { cpqRackCommonEnclosureEntry 19 } cpqRackCommonEnclosureHasTempSensors OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure contains temperature sensors. This will be true(2) is the enclosure contains temperature sensors. The cpqRackCommonEnclosureTempTable will contain temperature sensor specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureTempTable to get complete information on the enclosure." ::= { cpqRackCommonEnclosureEntry 20 } cpqRackCommonEnclosureHasFans OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure contains fans. This will be true(2) is the enclosure contains fans. The cpqRackCommonEnclosureFanTable will contain the fan specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFanTable to get complete information on the enclosure." ::= { cpqRackCommonEnclosureEntry 21 } cpqRackCommonEnclosureHasFuses OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure contains fuses. This will be true(2) is the enclosure contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFuseTable to get complete information on the enclosure." ::= { cpqRackCommonEnclosureEntry 22 } cpqRackCommonEnclosureMgmtUID OBJECT-TYPE SYNTAX INTEGER { other(1), -- Unknown device or could not be determined none(2), -- No Unit Identifier LED present ledOn(3), -- Unit Identifier LED is On ledOff(4) -- Unit Identifier LED is Off } ACCESS read-write STATUS mandatory DESCRIPTION "The Unit Identifier LED. This value will be one of the following: other(1) The state of the LED could not be determined. Setting the LED state is not allowed. none(2) The LED is not present. Setting LED state is not allowed. ledOn(3) The LED is present and ON. The LED can be turned off by setting the cpqRackCommonEnclosureMgmtUID to ledOff(4). ledOff(4) The LED is present and OFF. The LED can be turned on by setting the cpqRackCommonEnclosureMgmtUID to ledOn(3)." ::= { cpqRackCommonEnclosureEntry 23 } cpqRackCommonEnclosureSerialNumPrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure immediately preceding or above this enclosure. The string will be empty if the neighbor enclosure serial number could not be determined or there is no enclosure preceding this one." ::= { cpqRackCommonEnclosureEntry 24 } cpqRackCommonEnclosureSerialNumNext OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure immediately following or below this enclosure. The string will be empty if the neighbor enclosure serial number could not be determined or there is no enclosure following this one." ::= { cpqRackCommonEnclosureEntry 25 } cpqRackCommonEnclosureAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique address of the enclosure within the rack. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackCommonEnclosureEntry 26 } cpqRackCommonEnclosureProductId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The product id string of the enclosure. The string will be empty if the enclosure does not report the product id string." ::= { cpqRackCommonEnclosureEntry 27 } cpqRackCommonEnclosureProductIdPrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The product id string of the enclosure immediately preceding or above this enclosure. The string will be empty if the enclosure does not report the product id string." ::= { cpqRackCommonEnclosureEntry 28 } cpqRackCommonEnclosureProductIdNext OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The product id string of the enclosure immediately following or below this enclosure. The string will be empty if the enclosure does not report the product id string." ::= { cpqRackCommonEnclosureEntry 29 } cpqRackCommonEnclosureUUID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The universal unique identifier string of the enclosure. The string will be empty if the enclosure does not report the UUID string." ::= { cpqRackCommonEnclosureEntry 30 } cpqRackCommonEnclosureUUIDPrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The universal unique identifier string of the enclosure immediately preceding or above this enclosure. The string will be empty if the enclosure does not report the UUID string or if there is no preceding enclosure." ::= { cpqRackCommonEnclosureEntry 31 } cpqRackCommonEnclosureUUIDNext OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The universal unique identifier string of the enclosure immediately following or below this enclosure. The string will be empty if the enclosure does not report the UUID string or if there is no following enclosure." ::= { cpqRackCommonEnclosureEntry 32 } cpqRackCommonEnclosureHasManagers OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The enclosure contains managers. This will be true(2) is the enclosure contains managers. The cpqRackCommonEnclosureManagerTable will contain the manager specific information. Match the cpqRackCommonEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureManagerTable to get complete information on the enclosure." ::= { cpqRackCommonEnclosureEntry 33 } -- **************************************************************************** -- Rack Enclosure Common Temperature Sensor Table -- ============================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureTempTable (1.3.6.1.4.1.232.22.2.3.1.2) -- -- **************************************************************************** cpqRackCommonEnclosureTempTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureTempEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure temperature sensor information." ::= { cpqRackCommonEnclosure 2 } cpqRackCommonEnclosureTempEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureTempEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure temperature sensor description." INDEX { cpqRackCommonEnclosureTempRack, cpqRackCommonEnclosureTempChassis, cpqRackCommonEnclosureTempSensorIndex } ::= { cpqRackCommonEnclosureTempTable 1 } CpqRackCommonEnclosureTempEntry ::= SEQUENCE { cpqRackCommonEnclosureTempRack INTEGER, cpqRackCommonEnclosureTempChassis INTEGER, cpqRackCommonEnclosureTempSensorIndex INTEGER, cpqRackCommonEnclosureTempSensorEnclosureName DisplayString, cpqRackCommonEnclosureTempLocation DisplayString, cpqRackCommonEnclosureTempCurrent INTEGER, cpqRackCommonEnclosureTempThreshold INTEGER, cpqRackCommonEnclosureTempCondition INTEGER, cpqRackCommonEnclosureTempType INTEGER, cpqRackCommonEnclosureTempSensorEnclosureSerialNum DisplayString } cpqRackCommonEnclosureTempRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureTempEntry 1 } cpqRackCommonEnclosureTempChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureTempEntry 2 } cpqRackCommonEnclosureTempSensorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this temperature sensor within this enclosure in the rack." ::= { cpqRackCommonEnclosureTempEntry 3 } cpqRackCommonEnclosureTempSensorEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureTempEntry 4 } cpqRackCommonEnclosureTempLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location description of the temperature sensor within the enclosure. The string will be empty if the location could not be determined." ::= { cpqRackCommonEnclosureTempEntry 5 } cpqRackCommonEnclosureTempCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned." ::= { cpqRackCommonEnclosureTempEntry 6 } cpqRackCommonEnclosureTempThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackCommonEnclosureTempType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the enclosure will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned." ::= { cpqRackCommonEnclosureTempEntry 7 } cpqRackCommonEnclosureTempCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within the normal operating range. degraded(3) The temperature sensor is outside of the normal operating range. failed(4) The temperature sensor detects a condition that could possibly damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent." ::= { cpqRackCommonEnclosureTempEntry 8 } cpqRackCommonEnclosureTempType OBJECT-TYPE SYNTAX INTEGER { other(1), blowout(5), caution(9), critical(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqRackCommonEnclosureTempCondition will be set to degraded(3) and the system will either continue or shutdown depending on the user preferences. critical(15) If a critical(15) temperature sensor reaches its threshold, the cpqHeTemperatureCondition will be set to failed(4) and the system will shutdown." ::= { cpqRackCommonEnclosureTempEntry 9 } cpqRackCommonEnclosureTempSensorEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure containing this temperature sensor. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackCommonEnclosureTempEntry 10 } -- **************************************************************************** -- Rack Enclosure Common Fan Table -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureFanTable (1.3.6.1.4.1.232.22.2.3.1.3) -- -- **************************************************************************** cpqRackCommonEnclosureFanTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure fan information." ::= { cpqRackCommonEnclosure 3 } cpqRackCommonEnclosureFanEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure fan description." INDEX { cpqRackCommonEnclosureFanRack, cpqRackCommonEnclosureFanChassis, cpqRackCommonEnclosureFanIndex } ::= { cpqRackCommonEnclosureFanTable 1 } CpqRackCommonEnclosureFanEntry ::= SEQUENCE { cpqRackCommonEnclosureFanRack INTEGER, cpqRackCommonEnclosureFanChassis INTEGER, cpqRackCommonEnclosureFanIndex INTEGER, cpqRackCommonEnclosureFanEnclosureName DisplayString, cpqRackCommonEnclosureFanLocation DisplayString, cpqRackCommonEnclosureFanPartNumber DisplayString, cpqRackCommonEnclosureFanSparePartNumber DisplayString, cpqRackCommonEnclosureFanPresent INTEGER, cpqRackCommonEnclosureFanRedundant INTEGER, cpqRackCommonEnclosureFanRedundantGroupId INTEGER, cpqRackCommonEnclosureFanCondition INTEGER, cpqRackCommonEnclosureFanEnclosureSerialNum DisplayString } cpqRackCommonEnclosureFanRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureFanEntry 1 } cpqRackCommonEnclosureFanChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureFanEntry 2 } cpqRackCommonEnclosureFanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this fan within this enclosure in the rack." ::= { cpqRackCommonEnclosureFanEntry 3 } cpqRackCommonEnclosureFanEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureFanEntry 4 } cpqRackCommonEnclosureFanLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location description of the fan within the enclosure. The string will be empty if the location could not be determined." ::= { cpqRackCommonEnclosureFanEntry 5 } cpqRackCommonEnclosureFanPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the enclosure fan. The string will be empty if the part number could not be determined." ::= { cpqRackCommonEnclosureFanEntry 6 } cpqRackCommonEnclosureFanSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the enclosure fan. The string will be empty if the part number could not be determined." ::= { cpqRackCommonEnclosureFanEntry 7 } cpqRackCommonEnclosureFanPresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the fan described is present in the system." ::= { cpqRackCommonEnclosureFanEntry 8 } cpqRackCommonEnclosureFanRedundant OBJECT-TYPE SYNTAX INTEGER { other(1), notRedundant(2), redundant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the fan is in a redundant configuration." ::= { cpqRackCommonEnclosureFanEntry 9 } cpqRackCommonEnclosureFanRedundantGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the group number for redundant fans within this enclosure." ::= { cpqRackCommonEnclosureFanEntry 10 } cpqRackCommonEnclosureFanCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported. ok(2) The fan is operating properly. degraded(2) A redundant fan is not operating properly. failed(4) A non-redundant fan is not operating properly." ::= { cpqRackCommonEnclosureFanEntry 11 } cpqRackCommonEnclosureFanEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure containing the fan. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackCommonEnclosureFanEntry 12 } -- **************************************************************************** -- Rack Enclosure Common Fuse Table -- ================================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureFuseTable (1.3.6.1.4.1.232.22.2.3.1.4) -- -- **************************************************************************** cpqRackCommonEnclosureFuseTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureFuseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure fuse information." ::= { cpqRackCommonEnclosure 4 } cpqRackCommonEnclosureFuseEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureFuseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure fuse description." INDEX { cpqRackCommonEnclosureFuseRack, cpqRackCommonEnclosureFuseChassis, cpqRackCommonEnclosureFuseIndex } ::= { cpqRackCommonEnclosureFuseTable 1 } CpqRackCommonEnclosureFuseEntry ::= SEQUENCE { cpqRackCommonEnclosureFuseRack INTEGER, cpqRackCommonEnclosureFuseChassis INTEGER, cpqRackCommonEnclosureFuseIndex INTEGER, cpqRackCommonEnclosureFuseEnclosureName DisplayString, cpqRackCommonEnclosureFuseLocation DisplayString, cpqRackCommonEnclosureFusePresent INTEGER, cpqRackCommonEnclosureFuseCondition INTEGER } cpqRackCommonEnclosureFuseRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureFuseEntry 1 } cpqRackCommonEnclosureFuseChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureFuseEntry 2 } cpqRackCommonEnclosureFuseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies the fuse within this enclosure." ::= { cpqRackCommonEnclosureFuseEntry 3 } cpqRackCommonEnclosureFuseEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureFuseEntry 4 } cpqRackCommonEnclosureFuseLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location description of the fuse within the enclosure. The string will be empty if the location could not be determined." ::= { cpqRackCommonEnclosureFuseEntry 5 } cpqRackCommonEnclosureFusePresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the fuse described is present in the system." ::= { cpqRackCommonEnclosureFuseEntry 6 } cpqRackCommonEnclosureFuseCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the fuse. This value will be one of the following: other(1) Fuse status detection is not supported. ok(2) The fuse is operating properly. failed(4) A fuse has been tripped or is not operating properly." ::= { cpqRackCommonEnclosureFuseEntry 7 } -- **************************************************************************** -- Rack Enclosure Common FRU Table -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureFruTable (1.3.6.1.4.1.232.22.2.3.1.5) -- -- **************************************************************************** cpqRackCommonEnclosureFruTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureFruEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure field replaceable units information." ::= { cpqRackCommonEnclosure 5 } cpqRackCommonEnclosureFruEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureFruEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure field replaceable unit description." INDEX { cpqRackCommonEnclosureFruRack, cpqRackCommonEnclosureFruChassis, cpqRackCommonEnclosureFruIndex } ::= { cpqRackCommonEnclosureFruTable 1 } CpqRackCommonEnclosureFruEntry ::= SEQUENCE { cpqRackCommonEnclosureFruRack INTEGER, cpqRackCommonEnclosureFruChassis INTEGER, cpqRackCommonEnclosureFruIndex INTEGER, cpqRackCommonEnclosureFruEnclosureName DisplayString, cpqRackCommonEnclosureFruDescription DisplayString, cpqRackCommonEnclosureFruLocation DisplayString, cpqRackCommonEnclosureFruAssemblyPartNumber DisplayString, cpqRackCommonEnclosureFruSparePartNumber DisplayString, cpqRackCommonEnclosureFruAutoRev DisplayString, cpqRackCommonEnclosureFruSerialNum DisplayString } cpqRackCommonEnclosureFruRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureFruEntry 1 } cpqRackCommonEnclosureFruChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureFruEntry 2 } cpqRackCommonEnclosureFruIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies the FRU within this enclosure." ::= { cpqRackCommonEnclosureFruEntry 3 } cpqRackCommonEnclosureFruEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureFruEntry 4 } cpqRackCommonEnclosureFruDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "A description of the FRU component. The string will be empty if the enclosure does not report the description information." ::= { cpqRackCommonEnclosureFruEntry 5 } cpqRackCommonEnclosureFruLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location description of the FRU within the enclosure. The string will be empty if the location could not be determined." ::= { cpqRackCommonEnclosureFruEntry 6 } cpqRackCommonEnclosureFruAssemblyPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The assembly part number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information." ::= { cpqRackCommonEnclosureFruEntry 7 } cpqRackCommonEnclosureFruSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information." ::= { cpqRackCommonEnclosureFruEntry 8 } cpqRackCommonEnclosureFruAutoRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The auto revision number of the FRU within the enclosure. The string will be empty if the enclosure does not report this information." ::= { cpqRackCommonEnclosureFruEntry 9 } cpqRackCommonEnclosureFruSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the FRU within the enclosure. The string will be empty if the enclosure does not report the serial number." ::= { cpqRackCommonEnclosureFruEntry 10 } -- **************************************************************************** -- Rack Enclosure Common Manager Table -- =================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackCommonEnclosure Group (1.3.6.1.4.1.232.22.2.3.1) -- cpqRackCommonEnclosureManagerTable (1.3.6.1.4.1.232.22.2.3.1.6) -- -- **************************************************************************** cpqRackCommonEnclosureManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackCommonEnclosureManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure manager information." ::= { cpqRackCommonEnclosure 6 } cpqRackCommonEnclosureManagerEntry OBJECT-TYPE SYNTAX CpqRackCommonEnclosureManagerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack enclosure manager description." INDEX { cpqRackCommonEnclosureManagerRack, cpqRackCommonEnclosureManagerChassis, cpqRackCommonEnclosureManagerIndex } ::= { cpqRackCommonEnclosureManagerTable 1 } CpqRackCommonEnclosureManagerEntry ::= SEQUENCE { cpqRackCommonEnclosureManagerRack INTEGER, cpqRackCommonEnclosureManagerChassis INTEGER, cpqRackCommonEnclosureManagerIndex INTEGER, cpqRackCommonEnclosureManagerEnclosureName DisplayString, cpqRackCommonEnclosureManagerLocation DisplayString, cpqRackCommonEnclosureManagerPartNumber DisplayString, cpqRackCommonEnclosureManagerSparePartNumber DisplayString, cpqRackCommonEnclosureManagerSerialNum DisplayString, cpqRackCommonEnclosureManagerRole INTEGER, cpqRackCommonEnclosureManagerPresent INTEGER, cpqRackCommonEnclosureManagerRedundant INTEGER, cpqRackCommonEnclosureManagerCondition INTEGER, cpqRackCommonEnclosureManagerEnclosureSerialNum DisplayString, cpqRackCommonEnclosureManagerUUID DisplayString, cpqRackCommonEnclosureManagerFWRev DisplayString } cpqRackCommonEnclosureManagerRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackCommonEnclosureManagerEntry 1 } cpqRackCommonEnclosureManagerChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackCommonEnclosureManagerEntry 2 } cpqRackCommonEnclosureManagerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this manager within this enclosure in the rack." ::= { cpqRackCommonEnclosureManagerEntry 3 } cpqRackCommonEnclosureManagerEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 4 } cpqRackCommonEnclosureManagerLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location description of the manager within the enclosure. The string will be empty if the location could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 5 } cpqRackCommonEnclosureManagerPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the enclosure manager. The string will be empty if the part number could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 6 } cpqRackCommonEnclosureManagerSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the enclosure manager. The string will be empty if the part number could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 7 } cpqRackCommonEnclosureManagerSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure manager. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 8 } cpqRackCommonEnclosureManagerRole OBJECT-TYPE SYNTAX INTEGER { standby(1), active(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the current role of the manager." ::= { cpqRackCommonEnclosureManagerEntry 9 } cpqRackCommonEnclosureManagerPresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the manager described is present in the system." ::= { cpqRackCommonEnclosureManagerEntry 10 } cpqRackCommonEnclosureManagerRedundant OBJECT-TYPE SYNTAX INTEGER { other(1), notRedundant(2), redundant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the manager is in a redundant configuration." ::= { cpqRackCommonEnclosureManagerEntry 11 } cpqRackCommonEnclosureManagerCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the manager. This value will be one of the following: other(1) Manager status detection is not supported. ok(2) The manager is operating properly. degraded(2) A redundant manager is not operating properly. failed(4) A non-redundant manager is not operating properly." ::= { cpqRackCommonEnclosureManagerEntry 12 } cpqRackCommonEnclosureManagerEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure containing the manager. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackCommonEnclosureManagerEntry 13 } cpqRackCommonEnclosureManagerUUID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The universal unique identifier string of the manager. The string will be empty if the enclosure does not report the UUID string." ::= { cpqRackCommonEnclosureManagerEntry 14 } cpqRackCommonEnclosureManagerFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The firmware revision of the enclosure manager. The string will be empty if the enclosure does not report the firmware revision or does not contain firmware." ::= { cpqRackCommonEnclosureManagerEntry 15 } -- **************************************************************************** -- Rack Enclosure for Servers Table -- ================================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackServerEnclosure Group (1.3.6.1.4.1.232.22.2.3.2) -- cpqRackServerEnclosureTable (1.3.6.1.4.1.232.22.2.3.2.1) -- -- **************************************************************************** cpqRackServerEnclosureTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackServerEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack enclosure information for servers." ::= { cpqRackServerEnclosure 1 } cpqRackServerEnclosureEntry OBJECT-TYPE SYNTAX CpqRackServerEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A server enclosure description." INDEX { cpqRackServerEnclosureRack, cpqRackServerEnclosureIndex } ::= { cpqRackServerEnclosureTable 1 } CpqRackServerEnclosureEntry ::= SEQUENCE { cpqRackServerEnclosureRack INTEGER, cpqRackServerEnclosureIndex INTEGER, cpqRackServerEnclosureName DisplayString, cpqRackServerEnclosureMaxNumBlades INTEGER, cpqRackServerEnclosureMaxNumBladesX INTEGER, cpqRackServerEnclosureMaxNumBladesY INTEGER, cpqRackServerEnclosureSolutionsId OCTET STRING } cpqRackServerEnclosureRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackServerEnclosureEntry 1 } cpqRackServerEnclosureIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this server enclosure in the rack." ::= { cpqRackServerEnclosureEntry 2 } cpqRackServerEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the server enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackServerEnclosureEntry 3 } cpqRackServerEnclosureMaxNumBlades OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of server blades the enclosure can contain. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackServerEnclosureEntry 4 } cpqRackServerEnclosureMaxNumBladesX OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of server blades in x-direction (from left to right) the enclosure can contain." ::= { cpqRackServerEnclosureEntry 5 } cpqRackServerEnclosureMaxNumBladesY OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of server blades in y-direction (from top to bottom) the enclosure can contain." ::= { cpqRackServerEnclosureEntry 6 } cpqRackServerEnclosureSolutionsId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-write STATUS optional DESCRIPTION "The identifier is used to label enclosure as a BladeSystem Matrix enclosure. Octet Values ===== ============================== 1 Solutions platform identifier Bits[7:4] - 0001b BladeSystem Matrix configured - 0000b reserved Bits[3:0] - 0000b reserved 2 major number - 0x01 - 0xff 3 minor number - 0x01 - 0xff 4 update number - 0x01 - 0xff 5 reserved/unused The identifier is set to all 0's if the enclosure is not configured as a BladeSystem Matrix enclosure." ::= { cpqRackServerEnclosureEntry 7 } -- **************************************************************************** -- Rack Enclosure for Power Supplies Table -- ======================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackPowerEnclosure Group (1.3.6.1.4.1.232.22.2.3.3) -- cpqRackPowerEnclosureTable (1.3.6.1.4.1.232.22.2.3.3.1) -- -- **************************************************************************** cpqRackPowerEnclosureTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackPowerEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack power enclosure information." ::= { cpqRackPowerEnclosure 1 } cpqRackPowerEnclosureEntry OBJECT-TYPE SYNTAX CpqRackPowerEnclosureEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack power enclosure description." INDEX { cpqRackPowerEnclosureRack, cpqRackPowerEnclosureIndex } ::= { cpqRackPowerEnclosureTable 1 } CpqRackPowerEnclosureEntry ::= SEQUENCE { cpqRackPowerEnclosureRack INTEGER, cpqRackPowerEnclosureIndex INTEGER, cpqRackPowerEnclosureName DisplayString, cpqRackPowerEnclosureMgmtBoardSerialNum DisplayString, cpqRackPowerEnclosureRedundant INTEGER, cpqRackPowerEnclosureLoadBalanced INTEGER, cpqRackPowerEnclosureInputPwrType INTEGER, cpqRackPowerEnclosurePwrFeedMax INTEGER, cpqRackPowerEnclosureCondition INTEGER, cpqRackPowerEnclosureBladeAutopoweron INTEGER } cpqRackPowerEnclosureRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackPowerEnclosureEntry 1 } cpqRackPowerEnclosureIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this power enclosure in the rack." ::= { cpqRackPowerEnclosureEntry 2 } cpqRackPowerEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the power enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackPowerEnclosureEntry 3 } cpqRackPowerEnclosureMgmtBoardSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure. The string will be empty if the enclosure does not report the serial number." ::= { cpqRackPowerEnclosureEntry 4 } cpqRackPowerEnclosureRedundant OBJECT-TYPE SYNTAX INTEGER { other(1), notRedundant(2), redundant(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if the power supply enclosure is in a redundant state." ::= { cpqRackPowerEnclosureEntry 5 } cpqRackPowerEnclosureLoadBalanced OBJECT-TYPE SYNTAX INTEGER { other(1), notLoadBalanced(2), loadBalanced(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates if the power supply enclosure is in a load balanced state." ::= { cpqRackPowerEnclosureEntry 6 } cpqRackPowerEnclosureInputPwrType OBJECT-TYPE SYNTAX INTEGER { other(1), singlePhase(2), threePhase(3), directCurrent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates type of input facility power." ::= { cpqRackPowerEnclosureEntry 7 } cpqRackPowerEnclosurePwrFeedMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the maximum facility power in watts. The maximum facility power being fed to this power enclosure. The value will be -1 if the power enclosure does not report the value or if the value is not known." ::= { cpqRackPowerEnclosureEntry 8 } cpqRackPowerEnclosureCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates current condition of the power enclosure. other(1) The power enclosure condition could not be determined. ok(2) The power enclosure is operating normally. degraded(3) The power enclosure is in a degraded state. The power subsystem may not be load balanced or may have lost redundancy." ::= { cpqRackPowerEnclosureEntry 9 } cpqRackPowerEnclosureBladeAutopoweron OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS optional DESCRIPTION "This indicates current condition of the power enclosure. other(1) The blade auto power on feature could not be determined. disabled(2) The enclosure will not automatically power on a blade when inserted. enabled(3) The enclosure will automatically power on a blade when inserted." ::= { cpqRackPowerEnclosureEntry 10 } -- **************************************************************************** -- The cpqRackLastEAEEvent holds data for last EAE event -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackEnclosure Group (1.3.6.1.4.1.232.22.2.3) -- cpqRackServerEnclosure Group (1.3.6.1.4.1.232.22.2.3.2) -- cpqRackLastEAEEvent (1.3.6.1.4.1.232.22.2.3.2.2) -- -- Implementation of this group is optional. -- -- **************************************************************************** cpqRackLastEAEEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) ACCESS read-only STATUS optional DESCRIPTION "Data for the last EAE event." -- -- This is the data variable that is sent with the generics EAE trap below. -- ::= { cpqRackServerEnclosure 2 } -- **************************************************************************** -- Rack Server Blade Table -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackServer Group (1.3.6.1.4.1.232.22.2.4) -- cpqRackServerBlade Group (1.3.6.1.4.1.232.22.2.4.1) -- cpqRackServerBladeTable (1.3.6.1.4.1.232.22.2.4.1.1) -- -- **************************************************************************** cpqRackServerBladeTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackServerBladeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack server blade information." ::= { cpqRackServerBlade 1 } cpqRackServerBladeEntry OBJECT-TYPE SYNTAX CpqRackServerBladeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack server blade description." INDEX { cpqRackServerBladeRack, cpqRackServerBladeChassis, cpqRackServerBladeIndex } ::= { cpqRackServerBladeTable 1 } CpqRackServerBladeEntry ::= SEQUENCE { cpqRackServerBladeRack INTEGER, cpqRackServerBladeChassis INTEGER, cpqRackServerBladeIndex INTEGER, cpqRackServerBladeName DisplayString, cpqRackServerBladeEnclosureName DisplayString, cpqRackServerBladePartNumber DisplayString, cpqRackServerBladeSparePartNumber DisplayString, cpqRackServerBladePosition INTEGER, cpqRackServerBladeHeight INTEGER, cpqRackServerBladeWidth INTEGER, cpqRackServerBladeDepth INTEGER, cpqRackServerBladePresent INTEGER, cpqRackServerBladeHasFuses INTEGER, cpqRackServerBladeEnclosureSerialNum DisplayString, cpqRackServerBladeSlotsUsed INTEGER, cpqRackServerBladeSerialNum DisplayString, cpqRackServerBladeProductId DisplayString, cpqRackServerBladeUid DisplayString, cpqRackServerBladeSlotsUsedX INTEGER, cpqRackServerBladeSlotsUsedY INTEGER, cpqRackServerBladeStatus INTEGER, cpqRackServerBladeFaultMajor INTEGER, cpqRackServerBladeFaultMinor INTEGER, cpqRackServerBladeFaultDiagnosticString DisplayString, cpqRackServerBladePowered INTEGER, cpqRackServerBladeUIDState INTEGER, cpqRackServerBladeSystemBIOSRevision DisplayString, cpqRackServerBladeSystemBIOSFlashingStatus INTEGER, cpqRackServerBladeHasManagementDevice INTEGER, cpqRackServerBladeManagementDeviceFirmwareRevision DisplayString, cpqRackServerBladeManagementDeviceFirmwareFlashingStatus INTEGER, cpqRackServerBladeDiagnosticAdaptorPresence INTEGER, cpqRackServerBladeASREnabled INTEGER, cpqRackServerBladeFrontIOBlankingModeStatus INTEGER, cpqRackServerBladePOSTStatus INTEGER, cpqRackServerBladePXEBootModeStatus INTEGER, cpqRackServerBladePendingBootOrderChange INTEGER, cpqRackServerBladeWattageMax INTEGER, cpqRackServerBladeWattageAvg INTEGER, cpqRackServerBladeWattageMin INTEGER } cpqRackServerBladeRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackServerBladeEntry 1 } cpqRackServerBladeChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackServerBladeEntry 2 } cpqRackServerBladeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this server blade within the enclosure." ::= { cpqRackServerBladeEntry 3 } cpqRackServerBladeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the server blade. The string will be empty if it could not be determined." ::= { cpqRackServerBladeEntry 4 } cpqRackServerBladeEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the enclosure which contains the blade. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackServerBladeEntry 5 } cpqRackServerBladePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the server blade. The string will be empty if the part number could not be determined." ::= { cpqRackServerBladeEntry 6 } cpqRackServerBladeSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the server blade. The string will be empty if the part number could not be determined." ::= { cpqRackServerBladeEntry 7 } cpqRackServerBladePosition OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The position or slot number of the server blade within the server enclosure. This will be -1 if the server enclosure does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 8 } cpqRackServerBladeHeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The height dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 9 } cpqRackServerBladeWidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The width dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 10 } cpqRackServerBladeDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The depth dimension of the rack space taken by the server blade expressed in millimeters. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 11 } cpqRackServerBladePresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the server blade described is present in the enclosure." ::= { cpqRackServerBladeEntry 12 } cpqRackServerBladeHasFuses OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The server blade contains fuses. This will be true(2) is the server blade contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackServerBladeEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFanTable to get complete information on the fuses." ::= { cpqRackServerBladeEntry 13 } cpqRackServerBladeEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure which contains the blade. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackServerBladeEntry 14 } cpqRackServerBladeSlotsUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slot positions occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 15 } cpqRackServerBladeSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the server blade. The string will be empty if the system does not report the serial number function." ::= { cpqRackServerBladeEntry 16 } cpqRackServerBladeProductId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The product id string of the server blade. The string will be empty if the system does not report the product id function." ::= { cpqRackServerBladeEntry 17 } cpqRackServerBladeUid OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The server blade unique identifier (UUID). The string will be empty if the blade does not report the UUID or if it could not be determined." ::= { cpqRackServerBladeEntry 18 } cpqRackServerBladeSlotsUsedX OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slot positions in x-direction (from left to right) occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 19 } cpqRackServerBladeSlotsUsedY OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slot positions in y-direction (from top to bottom) occupied by this server blade. This is used to indicate a server blade which may obscure an adjacent blade slot. This will be -1 if the rack does not report the information or it could not be determined." ::= { cpqRackServerBladeEntry 20 } cpqRackServerBladeStatus OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS optional DESCRIPTION "The health status of the blade. This will be other(1) if the rack does not report the information or if it could not be determined." ::= { cpqRackServerBladeEntry 21 } cpqRackServerBladeFaultMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The major fault code of the blade fault reported by the enclosure manager. This will be -1 if the rack does not report the information or if it could not be determined." ::= { cpqRackServerBladeEntry 22 } cpqRackServerBladeFaultMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The minor fault code of the blade fault reported by the enclosure manager. This will be -1 if the rack does not report the information or if it could not be determined." ::= { cpqRackServerBladeEntry 23 } cpqRackServerBladeFaultDiagnosticString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS optional DESCRIPTION "The server blade fault diagnostic string. This will contain a probable cause and potential diagnostic action to be taken to remedy the fault condition. The string will be empty if the blade does not report the diagnostic string or if it could not be determined." ::= { cpqRackServerBladeEntry 24 } cpqRackServerBladePowered OBJECT-TYPE SYNTAX INTEGER { other(1), on(2), off(3), powerStagedOff(4), reboot(5) } ACCESS read-write STATUS optional DESCRIPTION "The power state of the blade. This will be other(1) if the rack does not report the information or if it could not be determined." ::= { cpqRackServerBladeEntry 25 } cpqRackServerBladeUIDState OBJECT-TYPE SYNTAX INTEGER { other(1), -- Unknown device or could not be determined none(2), -- No Unit Identifier LED present ledOn(3), -- Unit Identifier LED is On ledOff(4) -- Unit Identifier LED is Off } ACCESS read-write STATUS optional DESCRIPTION "The Unit Identifier LED. This value will be one of the following: other(1) The state of the LED could not be determined. Setting the LED state is not allowed. none(2) The LED is not present. Setting LED state is not allowed. ledOn(3) The LED is present and ON. The LED can be turned off by setting the cpqRackServerBladeUIDState to ledOff(4). ledOff(4) The LED is present and OFF. The LED can be turned on by setting the cpqRackServerBladeUIDState to ledOn(3). " ::= { cpqRackServerBladeEntry 26 } cpqRackServerBladeSystemBIOSRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The server blade system bios revision. The string will be empty if the blade does not report the system bios revision or if it could not be determined." ::= { cpqRackServerBladeEntry 27 } cpqRackServerBladeSystemBIOSFlashingStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- Status Unknown or could not be determined normal(2), -- Blade sytem BIOS not currently in flash mode flashing(3) -- Blade sytem BIOS currently in flash mode } ACCESS read-only STATUS optional DESCRIPTION "Blade server system BIOS flashing / flash mode status indication. This will be other(1) if the rack does not report the information or if it could not be determined." ::= { cpqRackServerBladeEntry 28 } cpqRackServerBladeHasManagementDevice OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS optional DESCRIPTION "The blade server contains one or more management devices. This will be true(2) if the blade server contains managers and false (1) if not or if it can't be detected." ::= { cpqRackServerBladeEntry 29 } cpqRackServerBladeManagementDeviceFirmwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The server blade management device firwmware revision. The string will be empty if the blade does not report the management device firwmware revision or if it could not be determined." ::= { cpqRackServerBladeEntry 30 } cpqRackServerBladeManagementDeviceFirmwareFlashingStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- Status Unknown or could not be determined normal(2), -- Blade sytem management device not currently in flash mode flashing(3) -- Blade sytem management device currently in flash mode } ACCESS read-only STATUS optional DESCRIPTION "Blade server management device firwmware flashing / flash mode status indication. This will be other(1) if the rack does not report this information or if it could not be determined." ::= { cpqRackServerBladeEntry 31 } cpqRackServerBladeDiagnosticAdaptorPresence OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS optional DESCRIPTION "This specifies if a blade diagnostic adaptor is currently plugged into the system." ::= { cpqRackServerBladeEntry 32 } cpqRackServerBladeASREnabled OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS optional DESCRIPTION "Indicates whether the target blade server has Automatic Service Recovery feature enabled. This will be true(2) if the blade server has this feature eanbled and false (1) if not or if it can't be detected." ::= { cpqRackServerBladeEntry 33 } cpqRackServerBladeFrontIOBlankingModeStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), inactive(2), active(3) } ACCESS read-only STATUS optional DESCRIPTION "Indicates whether the target blade server has the front IO ports blanking feature enabled. This will be Active(3) if the blade server has this feature eanbled, Inactive (2) if not, or Unknown(1) if it can't be determined." ::= { cpqRackServerBladeEntry 34 } cpqRackServerBladePOSTStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- POST Status Unknown or could not be determined started(2), -- Blade has started Power-on-self-test (POST) process completed(3), -- Blade has finished Power-on-self-test (POST) process failed(4) -- Blade has failed to complete Power-on-self-test (POST) process and halted } ACCESS read-only STATUS optional DESCRIPTION "Blade server power-on self test (POST) status. This value will be one of the following: other(1) The state of the blade POST could not be determined. started(2) Blade has started Power-on-self-test (POST) process. completed(3) Blade has finished Power-on-self-test (POST) process. failed(4) Blade has failed to complete Power-on-self-test (POST) process and halted. This will be other(1) if the rack does not report this information or if it could not be determined." ::= { cpqRackServerBladeEntry 35 } cpqRackServerBladePXEBootModeStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), inactive(2), active(3) } ACCESS read-only STATUS optional DESCRIPTION "Indicates whether the target blade server is in PXE boot mode. This will be Active(3) if the blade server has this feature enbled, Inactive (2) if not, or Unknown(1) if it can't be determined." ::= { cpqRackServerBladeEntry 36 } cpqRackServerBladePendingBootOrderChange OBJECT-TYPE SYNTAX INTEGER { other(1), --Unknown or cannot be determined none(2), --No Changes firstPXE(3), --Boot To Pre-Boot eXecution (PXE) First firstHDD(4), --First Boot To Local HD firstRBSU(5), --First Boot To ROM Based Setup Utility oncePXE(6), --Boot To Pre-Boot eXecution (PXE) Once onceHDD(7), --Boot To Local HD Once onceRBSU(8), --Boot To ROM Based Setup Utility Once alwaysPXE(9), --Always Boot To Pre-Boot eXecution (PXE) alwaysHDD(10), --Always Boot To Local HD alwaysRBSU(11) --Always Boot To ROM Based Setup Utility } ACCESS read-write STATUS optional DESCRIPTION "Blade server pending boot order setting change state. This value will be one of the following: other(1) - Unknown or cannot be determined none(2) - No Changes firstPXE(3) - Boot To Pre-Boot eXecution (PXE) First firstHDD(4) - First Boot To Local HD firstRBSU(5) - First Boot To ROM Based Setup Utility oncePXE(6) - Boot To Pre-Boot eXecution (PXE) Once onceHDD(7) - Boot To Local HD Once onceRBSU(8) - Boot To ROM Based Setup Utility Once alwaysPXE(9) - Always Boot To Pre-Boot eXecution (PXE) alwaysHDD(10) - Always Boot To Local HD alwaysRBSU(11) - Always Boot To ROM Based Setup Utility This will be other(1) if the rack does not report this information or if it could not be determined." ::= { cpqRackServerBladeEntry 37 } cpqRackServerBladeWattageMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Maximum wattage the server has consumed during this power cycle." ::= { cpqRackServerBladeEntry 38 } cpqRackServerBladeWattageAvg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Average wattage the server is consuming, averaged over a period defined by the product." ::= { cpqRackServerBladeEntry 39 } cpqRackServerBladeWattageMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Minimum wattage the server has consumed, computed from a period defined by the product. Value will be 0 if not supported, but other wattage values are supported." ::= { cpqRackServerBladeEntry 40 } -- **************************************************************************** -- Rack Server Networking Table -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackServer Group (1.3.6.1.4.1.232.22.2.4) -- cpqRackServerNetworking Group (1.3.6.1.4.1.232.22.2.4.2) -- cpqRackServerNetworkingTable (1.3.6.1.4.1.232.22.2.4.2.1) -- -- **************************************************************************** cpqRackServerNetworkingTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackServerNetworkingEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table of rack server networking information." ::= { cpqRackServerNetworking 1 } cpqRackServerNetworkingEntry OBJECT-TYPE SYNTAX CpqRackServerNetworkingEntry ACCESS not-accessible STATUS optional DESCRIPTION "A rack server networking description." INDEX { cpqRackServerNetworkingRack, cpqRackServerNetworkingChassis, cpqRackServerNetworkingIndex } ::= { cpqRackServerNetworkingTable 1 } CpqRackServerNetworkingEntry ::= SEQUENCE { cpqRackServerNetworkingRack INTEGER, cpqRackServerNetworkingChassis INTEGER, cpqRackServerNetworkingIndex INTEGER, cpqRackServerNetworkingName DisplayString, cpqRackServerNetworkingEnclosureName DisplayString, cpqRackServerNetworkingEthernetInterfaces INTEGER, cpqRackServerNetworkingEthernetMACAddress DisplayString } cpqRackServerNetworkingRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackServerNetworkingEntry 1 } cpqRackServerNetworkingChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackServerNetworkingEntry 2 } cpqRackServerNetworkingIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that uniquely specifies this server within the enclosure." ::= { cpqRackServerNetworkingEntry 3 } cpqRackServerNetworkingName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the server. The string will be empty if it could not be determined." ::= { cpqRackServerNetworkingEntry 4 } cpqRackServerNetworkingEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the enclosure which contains the server. The string will be empty if the enclosure does not report the name or if it could not be determined." ::= { cpqRackServerNetworkingEntry 5 } cpqRackServerNetworkingEthernetInterfaces OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that specifies the amount of Ethernet network interfaces in the server." ::= { cpqRackServerNetworkingEntry 6 } cpqRackServerNetworkingEthernetMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The MAC address for the Ethernet NIC populated in the server. The string will be empty if it could not be determined." ::= { cpqRackServerNetworkingEntry 7 } -- **************************************************************************** -- Rack Server Temperature Sensor Table -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackServer Group (1.3.6.1.4.1.232.22.2.4) -- cpqRackServerTempSensor Group (1.3.6.1.4.1.232.22.2.4.3) -- cpqRackServerTempSensorTable (1.3.6.1.4.1.232.22.2.4.3.1) -- -- **************************************************************************** cpqRackServerTempSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackServerTempSensorEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table of rack server temperature sensor information." ::= { cpqRackServerTempSensor 1 } cpqRackServerTempSensorEntry OBJECT-TYPE SYNTAX CpqRackServerTempSensorEntry ACCESS not-accessible STATUS optional DESCRIPTION "A rack server temperature sensor description." INDEX { cpqRackServerTempSensorRack, cpqRackServerTempSensorChassis, cpqRackServerTempSensorIndex } ::= { cpqRackServerTempSensorTable 1 } CpqRackServerTempSensorEntry ::= SEQUENCE { cpqRackServerTempSensorRack INTEGER, cpqRackServerTempSensorChassis INTEGER, cpqRackServerTempSensorIndex INTEGER, cpqRackServerTempSensorName DisplayString, cpqRackServerTempSensorEnclosureName DisplayString, cpqRackServerTempSensorCount INTEGER, cpqRackServerTempSensorLocation DisplayString, cpqRackServerTempSensorCurrent INTEGER, cpqRackServerTempSensorThreshold INTEGER, cpqRackServerTempSensorCondition INTEGER, cpqRackServerTempSensorType INTEGER } cpqRackServerTempSensorRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackServerTempSensorEntry 1 } cpqRackServerTempSensorChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that uniquely specifies this enclosure in the rack." ::= { cpqRackServerTempSensorEntry 2 } cpqRackServerTempSensorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that uniquely specifies this server within the enclosure." ::= { cpqRackServerTempSensorEntry 3 } cpqRackServerTempSensorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the server. The string will be empty if it could not be determined." ::= { cpqRackServerTempSensorEntry 4 } cpqRackServerTempSensorEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the enclosure which contains the server. The string will be empty if the enclosure does not report the name or if it could not be determined." ::= { cpqRackServerTempSensorEntry 5 } cpqRackServerTempSensorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "A number that specifies the amount of temperature sensors in the server." ::= { cpqRackServerTempSensorEntry 6 } cpqRackServerTempSensorLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The location description of the temperature sensor within the blade server. The string will be empty if it could not be determined." ::= { cpqRackServerTempSensorEntry 7 } cpqRackServerTempSensorCurrent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned." ::= { cpqRackServerTempSensorEntry 8 } cpqRackServerTempSensorThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackServerTempSensorType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the enclosure will be considered as in a failed state. If this value cannot be determined by software, then a value of -1 will be returned." ::= { cpqRackServerTempSensorEntry 9 } cpqRackServerTempSensorCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS optional DESCRIPTION "The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within the normal operating range. degraded(3) The temperature sensor is outside of the normal operating range. failed(4) The temperature sensor detects a condition that could possibly overheat the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent." ::= { cpqRackServerTempSensorEntry 10 } cpqRackServerTempSensorType OBJECT-TYPE SYNTAX INTEGER { other(1), blowout(5), caution(9), critical(15) } ACCESS read-only STATUS optional DESCRIPTION "This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be determined. blowout(5) If a blowout(5) temperature sensor reaches its threshold, the fan or fans in the area of the temperature sensor will increase in speed in an attempt to reduce the temperature before a caution or critical threshold is reached. caution(9) If a caution(9) temperature sensor reaches its threshold, the cpqRackServerTempSensorCondition will be set to degraded(3) and the system will either continue or shutdown depending on the local blade server policy settings. critical(15) If a critical(15) temperature sensor reaches its threshold, cpqRackServerTempSensorCondition will be set to failed(4) and the blade server will shutdown." ::= { cpqRackServerTempSensorEntry 11 } -- **************************************************************************** -- Rack Power Supply Table -- ======================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackPower Group (1.3.6.1.4.1.232.22.2.5) -- cpqRackPowerSupply Group (1.3.6.1.4.1.232.22.2.5.1) -- cpqRackPowerSupplyTable (1.3.6.1.4.1.232.22.2.5.1.1) -- -- **************************************************************************** cpqRackPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack power supply information." ::= { cpqRackPowerSupply 1 } cpqRackPowerSupplyEntry OBJECT-TYPE SYNTAX CpqRackPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack power supply description." INDEX { cpqRackPowerSupplyRack, cpqRackPowerSupplyChassis, cpqRackPowerSupplyIndex } ::= { cpqRackPowerSupplyTable 1 } CpqRackPowerSupplyEntry ::= SEQUENCE { cpqRackPowerSupplyRack INTEGER, cpqRackPowerSupplyChassis INTEGER, cpqRackPowerSupplyIndex INTEGER, cpqRackPowerSupplyEnclosureName DisplayString, cpqRackPowerSupplySerialNum DisplayString, cpqRackPowerSupplyPartNumber DisplayString, cpqRackPowerSupplySparePartNumber DisplayString, cpqRackPowerSupplyFWRev DisplayString, cpqRackPowerSupplyMaxPwrOutput INTEGER, cpqRackPowerSupplyCurPwrOutput INTEGER, cpqRackPowerSupplyPosition INTEGER, cpqRackPowerSupplyIntakeTemp INTEGER, cpqRackPowerSupplyExhaustTemp INTEGER, cpqRackPowerSupplyStatus INTEGER, cpqRackPowerSupplyInputLineStatus INTEGER, cpqRackPowerSupplyPresent INTEGER, cpqRackPowerSupplyCondition INTEGER, cpqRackPowerSupplyEnclosureSerialNum DisplayString } cpqRackPowerSupplyRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackPowerSupplyEntry 1 } cpqRackPowerSupplyChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this power enclosure in the rack." ::= { cpqRackPowerSupplyEntry 2 } cpqRackPowerSupplyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this power supply in the enclosure." ::= { cpqRackPowerSupplyEntry 3 } cpqRackPowerSupplyEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the power supply enclosure in which this power supply resides. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackPowerSupplyEntry 4 } cpqRackPowerSupplySerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the power supply. The string will be empty if the power supply does not report the serial number." ::= { cpqRackPowerSupplyEntry 5 } cpqRackPowerSupplyPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the power supply. The string will be empty if the power supply does not report this function." ::= { cpqRackPowerSupplyEntry 6 } cpqRackPowerSupplySparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the power supply. The string will be empty if the power supply does not report this function." ::= { cpqRackPowerSupplyEntry 7 } cpqRackPowerSupplyFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The firmware revision of the power supply. The string will be empty if the power supply does not report the firmware revision." ::= { cpqRackPowerSupplyEntry 8 } cpqRackPowerSupplyMaxPwrOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum power output of the power supply in watts. The value will be -1 if the power supply does not report the value." ::= { cpqRackPowerSupplyEntry 9 } cpqRackPowerSupplyCurPwrOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current power output of the power supply in watts. The value will be -1 if the power supply does not report the value." ::= { cpqRackPowerSupplyEntry 10 } cpqRackPowerSupplyPosition OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The position of the power supply within the power enclosure. This will be -1 if the power enclosure does not report the power supply information or it could not be determined." ::= { cpqRackPowerSupplyEntry 11 } cpqRackPowerSupplyIntakeTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current air temperature at the intake of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value." ::= { cpqRackPowerSupplyEntry 12 } cpqRackPowerSupplyExhaustTemp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current air temperature at the exhaust of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value." ::= { cpqRackPowerSupplyEntry 13 } cpqRackPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), generalFailure(2), bistFailure(3), fanFailure(4), tempFailure(5), interlockOpen(6), epromFailed(7), vrefFailed(8), dacFailed(9), ramTestFailed(10), voltageChannelFailed(11), orringdiodeFailed(12), brownOut(13), giveupOnStartup(14), nvramInvalid(15), calibrationTableInvalid(16) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply." ::= { cpqRackPowerSupplyEntry 14 } cpqRackPowerSupplyInputLineStatus OBJECT-TYPE SYNTAX INTEGER { noError(1), lineOverVoltage(2), lineUnderVoltage(3), lineHit(4), brownOut(5), linePowerLoss(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of line input power." ::= { cpqRackPowerSupplyEntry 15 } cpqRackPowerSupplyPresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the power supply described is present in the enclosure." ::= { cpqRackPowerSupplyEntry 16 } cpqRackPowerSupplyCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply is operating normally. degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range. failed(4) A power supply component detects a condition that could possibly damage the system." ::= { cpqRackPowerSupplyEntry 17 } cpqRackPowerSupplyEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the power supply enclosure in which this power supply resides. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackPowerSupplyEntry 18 } -- **************************************************************************** -- Rack Network -- ============ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackNetwork Group (1.3.6.1.4.1.232.22.2.6) -- -- **************************************************************************** cpqRackNetworkAddressesTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackNetworkAddressesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack network addresses." ::= { cpqRackNetwork 2} cpqRackNetworkAddressesEntry OBJECT-TYPE SYNTAX CpqRackNetworkAddressesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Array of ALL the network addresses of the system generating the indication. This may include IPv4 addresses (based on IETF RFC 1208) or IPv6 addresses (based on IETF RFC 4291)." INDEX { cpqRackNetworkAddresses } ::= { cpqRackNetworkAddressesTable 1} CpqRackNetworkAddressesEntry ::= SEQUENCE { cpqRackNetworkAddresses DisplayString } cpqRackNetworkAddresses OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A network address of the system generating the indication." ::= { cpqRackNetworkAddressesEntry 1} -- **************************************************************************** -- Rack Network Connector Table -- ============================ -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackNetwork Group (1.3.6.1.4.1.232.22.2.6) -- cpqRackNetConnector Group (1.3.6.1.4.1.232.22.2.6.1) -- cpqRackNetConnectorTable (1.3.6.1.4.1.232.22.2.6.1.1) -- -- **************************************************************************** cpqRackNetConnectorTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackNetConnectorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of rack network connector information." ::= { cpqRackNetConnector 1 } cpqRackNetConnectorEntry OBJECT-TYPE SYNTAX CpqRackNetConnectorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A rack network connector description." INDEX { cpqRackNetConnectorRack, cpqRackNetConnectorChassis, cpqRackNetConnectorIndex } ::= { cpqRackNetConnectorTable 1 } CpqRackNetConnectorEntry ::= SEQUENCE { cpqRackNetConnectorRack INTEGER, cpqRackNetConnectorChassis INTEGER, cpqRackNetConnectorIndex INTEGER, cpqRackNetConnectorEnclosureName DisplayString, cpqRackNetConnectorName DisplayString, cpqRackNetConnectorModel DisplayString, cpqRackNetConnectorSerialNum DisplayString, cpqRackNetConnectorPartNumber DisplayString, cpqRackNetConnectorSparePartNumber DisplayString, cpqRackNetConnectorFWRev DisplayString, cpqRackNetConnectorType INTEGER, cpqRackNetConnectorLocation DisplayString, cpqRackNetConnectorPresent INTEGER, cpqRackNetConnectorHasFuses INTEGER, cpqRackNetConnectorEnclosureSerialNum DisplayString, cpqRackNetConnectorTechnologyType INTEGER, cpqRackNetConnectorDeviceType INTEGER } cpqRackNetConnectorRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this rack." ::= { cpqRackNetConnectorEntry 1 } cpqRackNetConnectorChassis OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this server enclosure in the rack." ::= { cpqRackNetConnectorEntry 2 } cpqRackNetConnectorIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number that uniquely specifies this network connector in the rack." ::= { cpqRackNetConnectorEntry 3 } cpqRackNetConnectorEnclosureName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the network connector enclosure. The string will be empty if the enclosure does not report the name or it could not be determined." ::= { cpqRackNetConnectorEntry 4 } cpqRackNetConnectorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the network connector. The string will be empty if the network connector does not report the name or it could not be determined." ::= { cpqRackNetConnectorEntry 5 } cpqRackNetConnectorModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The model name of the network connector. The string will be empty if the network connector does not report the model information." ::= { cpqRackNetConnectorEntry 6 } cpqRackNetConnectorSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the network connector. The string will be empty if the network connector does not report the serial number." ::= { cpqRackNetConnectorEntry 7 } cpqRackNetConnectorPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The part number of the network connector. The string will be empty if the enclosure does not report this function." ::= { cpqRackNetConnectorEntry 8 } cpqRackNetConnectorSparePartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The spare part number of the network connector. The string will be empty if the enclosure does not report this function." ::= { cpqRackNetConnectorEntry 9 } cpqRackNetConnectorFWRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The firmware revision of the network connector. The string will be empty if the network connector does not report the firmware revision." ::= { cpqRackNetConnectorEntry 10 } cpqRackNetConnectorType OBJECT-TYPE SYNTAX INTEGER { other(1), passive(2), active(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of network connector within the enclosure." ::= { cpqRackNetConnectorEntry 11 } cpqRackNetConnectorLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The location of the network connector within the enclosure." ::= { cpqRackNetConnectorEntry 12 } cpqRackNetConnectorPresent OBJECT-TYPE SYNTAX INTEGER { other(1), absent(2), present(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This specifies if the network connector described is present in the enclosure." ::= { cpqRackNetConnectorEntry 13 } cpqRackNetConnectorHasFuses OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The network connector contains fuses. This will be true(2) is the network connector contains fuses. The cpqRackCommonEnclosureFuseTable will contain the fuse specific information. Match the cpqRackNetworkEnclosureSerialNum in this table to the serial number in the cpqRackCommonEnclosureFusTable to get complete information on the fuses." ::= { cpqRackNetConnectorEntry 14 } cpqRackNetConnectorEnclosureSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the enclosure containing the network connector. The string will be empty if the enclosure does not report the serial number or it could not be determined." ::= { cpqRackNetConnectorEntry 15 } cpqRackNetConnectorTechnologyType OBJECT-TYPE SYNTAX INTEGER { other(1), passive(2), active(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of network connector within the enclosure." ::= { cpqRackNetConnectorEntry 16 } cpqRackNetConnectorDeviceType OBJECT-TYPE SYNTAX INTEGER { noconnect(1), network(2), fibrechannel(3), sas(4), inifiband(5), pciexpress(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of interrconnect in the enclosure. This will be -1 if it is not reported or can not be deteremined." ::= { cpqRackNetConnectorEntry 17 } -- **************************************************************************** -- Rack Hardware Information -- ========================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackHW Group (1.3.6.1.4.1.232.22.2.7) -- -- **************************************************************************** cpqRackHWPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS optional DESCRIPTION "Part number for the hardware generating the indication." ::= { cpqRackHW 1 } cpqRackHWFirmwareVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackHWFirmwareVersionEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table of rack firmware versions." ::= { cpqRackHW 2 } cpqRackHWFirmwareVersionEntry OBJECT-TYPE SYNTAX CpqRackHWFirmwareVersionEntry ACCESS not-accessible STATUS optional DESCRIPTION "Array of versions of firmware for the hardware associated with the indication." INDEX { cpqRackHWFirmwareVersion } ::= { cpqRackHWFirmwareVersionTable 1 } CpqRackHWFirmwareVersionEntry ::= SEQUENCE { cpqRackHWFirmwareVersion DisplayString } cpqRackHWFirmwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-only STATUS optional DESCRIPTION "A version of firmware for the hardware associated with the indication." ::= { cpqRackHWFirmwareVersionEntry 1 } cpqRackHWManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..65)) ACCESS read-only STATUS optional DESCRIPTION "Manufacturer of the hardware associated with the indication.Device indication hardware manufacturer." ::= { cpqRackHW 3 } cpqRackHWSerialNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackHWSerialNumberEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table of rack hardware serial numbers." ::= { cpqRackHW 4 } cpqRackHWSerialNumberEntry OBJECT-TYPE SYNTAX CpqRackHWSerialNumberEntry ACCESS not-accessible STATUS optional DESCRIPTION "Array of all the serial numbers of the hardware associated with the indication." INDEX { cpqRackHWSerialNumber } ::= { cpqRackHWSerialNumberTable 1 } CpqRackHWSerialNumberEntry ::= SEQUENCE { cpqRackHWSerialNumber DisplayString } cpqRackHWSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS optional DESCRIPTION "A serial number of the hardware associated with the indication." ::= { cpqRackHWSerialNumberEntry 1 } cpqRackHWFRUDetails OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) ACCESS read-only STATUS optional DESCRIPTION "This is used to provide miscellaneous FRU specific details Some examples are DIMM size, Processor stepping info etc." ::= { cpqRackHW 5 } cpqRackHWDevicePermanentNameFormat OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), worldWideName(3), macAddress(4) } ACCESS read-only STATUS optional DESCRIPTION "The format of the DevicePermanentName property is interpreted based upon the value of this property. Values are defined as: 1 - unknown. The format is not meaningfully interpretable by a CIM client application. 2 - other. The format is defined by the value of the OtherPermanentNameFormat property. 3 - worldWideName. The format is a WorldWideName. 4 - macAddress. The format is a LAN MAC Address." ::= { cpqRackHW 6 } cpqRackHWOtherPermanentNameFormat OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "A string defining other values for DevicePermanentFormat. It is empty unless DevicePermanentFormat value is other." ::= { cpqRackHW 7 } -- **************************************************************************** -- Rack Ers Information -- ========================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackComponent Group (1.3.6.1.4.1.232.22.2) -- cpqRackErs Group (1.3.6.1.4.1.232.22.2.8) -- -- **************************************************************************** cpqRackErsTransactionType OBJECT-TYPE SYNTAX INTEGER { registration(1), serviceEvent(2), l2DataCollection(3), unregistration(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Embedded Remote Support transaction type. The following values are defined: registration(1) Registration operation with Insight Remote Host or Insight Online Host. serviceEvent(2) Sending of service event to Insight Remote Host or Insight Online Host. l2DataCollection(3) L2 Data collection operation. unregistration(4) Unregistration with Insight Remote Host or Insight Online Host." ::= { cpqRackErs 1 } cpqRackErsConnectionModel OBJECT-TYPE SYNTAX INTEGER { insightOnline(1), insightRemoteSupport(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Embedded Remote Support connection model configured on the Onboard Administrator." ::= { cpqRackErs 2 } cpqRackErsFailureCode OBJECT-TYPE SYNTAX INTEGER{ genericTransmitError(1), clientTransmitTimeout(2), clientReceiveTimeout(3), proxyConnectError(4), remoteHostConnectError(5), remoteServiceError(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Embedded Remote Support transaction failure code." ::= { cpqRackErs 3 } cpqRackErsRemoteHost OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..135)) ACCESS read-only STATUS mandatory DESCRIPTION "Remote destination server's hostname and port as configured on the Onboard Administrator. Example: myremotehost.hpe.com:6789" ::= { cpqRackErs 4 } -- **************************************************************************** -- Rack System Object Identification -- ================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackSysObjID Group (1.3.6.1.4.1.232.22.3) -- -- **************************************************************************** cpqRackSystemObjectIdentification OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The hardware identification string. The string will reported by the rack firmware." ::= { cpqRackSysObjID 1 } -- **************************************************************************** -- Rack Event Information -- ================================= -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqRackInfo Group (1.3.6.1.4.1.232.22) -- cpqRackEventInfo Group (1.3.6.1.4.1.232.22.4) -- -- **************************************************************************** cpqRackEventIndicationIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "The Event Indication Identifier." ::= { cpqRackEventInfo 1 } cpqRackEventIndicationTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..33)) ACCESS read-only STATUS optional DESCRIPTION "The Event Indication Time." ::= { cpqRackEventInfo 2 } cpqRackEventDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) ACCESS read-only STATUS optional DESCRIPTION "The Event Description." ::= { cpqRackEventInfo 3 } cpqRackEventSummary OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "Short description of the reason for the event." ::= { cpqRackEventInfo 4 } cpqRackEventCategory OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), processor(3), memory(4), systemHardware(5), supportHardware(6), primaryStorageDevice(7), secondaryStorageDevice(8), otherStorageDevice(9), networkDevice(10), otherDevice(11), ioAdapter(12), networkAdapter(13), otherAdapter(14), processorPower(15), memoryPower(16), systemPower(17), primaryStorageDevicePower(18), secondaryStoragePower(19), otherStoragePower(20), otherPower(21), processorCooling(22), memoryCooling(23), systemCooling(24), primaryStorageDeviceCooling(25), secondaryStorageDeviceCooling(26), otherStorageDeviceCooling(27), otherCooling(28), systemHWSecurity(29), primaryStorageDeviceSecurity(30), secondaryStorageDeviceSecurity(31), otherStorageDeviceSecurity(32), otherHWSecurity(33), systemInterconnect(34), supportInterconnect(35), clusterInterconnect(36), storageInterconnect(37), networkInterconnect(38), otherInterconnect(39), os(40), systemFirmware(41), deviceFirmware(42), supportFirmware(43), systemFirmwareSecurity(44), osSecurity(45), softwareApplication(46), softwareApplicationSecurity(47), nonStopIncident(48) } ACCESS read-only STATUS optional DESCRIPTION "Category for the event. This category is intended to be used by the consumer to group events." ::= { cpqRackEventInfo 5 } cpqRackOtherEventCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "A string defining other values for EventCategory. It is empty unless EventCategory value is other(1)." ::= { cpqRackEventInfo 6 } cpqRackEventSubCategory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Sub-category for the event. This sub-category is intended to be used by the consumer in conjunction with the EventCategory to provide additional granularity to group events. It is expected that additional values will be added that can be used with other EventCategory values." ::= { cpqRackEventInfo 7 } cpqRackOtherEventSubCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "A string defining other values for EventSubCategory. It is empty unless EventSubCategory value is other(1)" ::= { cpqRackEventInfo 8 } cpqRackEventThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Identifies the number of indications that need to occur as part of the internal provider throttling configured for this event." ::= { cpqRackEventInfo 9 } cpqRackEventTimeWin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Identifies the time window during which the EventThreshold number of events need to occur as part of the internal provider throttling configured for this event. Time is in minutes. 0 means any amount of time." ::= { cpqRackEventInfo 10 } cpqRackEventActualThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Identifies the number of indications that have occurred to meet the internal provider throttling configured for this event." ::= { cpqRackEventInfo 11 } cpqRackEventActualTimeWin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Identifies the time window during which the ActualEventThreshold number of events have occurred to meet the internal provider throttling configured for this event. Time is in minutes. 0 means any amount of time." ::= { cpqRackEventInfo 12 } cpqRackEventProviderVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) ACCESS read-only STATUS optional DESCRIPTION "The version of the provider generating this indication." ::= { cpqRackEventInfo 13 } cpqRackEventAlertingElementFormat OBJECT-TYPE SYNTAX INTEGER { unknown(1), other(2), cimObjectPath(3) } ACCESS read-only STATUS optional DESCRIPTION "The format of the AlertingManagedElement property is interpretable based upon the value of this property. Values are defined as: 1 - unknown. The format is unknown or not meaningfully interpretable by a CIM client application. 2 - other. The format is defined by the value of the OtherAlertingElementFormat property. 3 - cimObjectPath. The format is a CIMObjectPath, specifying an instance in the CIM Schema." ::= { cpqRackEventInfo 14 } cpqRackEventOtherAlertingElementFormat OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (0..256)) ACCESS read-only STATUS optional DESCRIPTION "A string defining other values for AlertingElementFormat. It is empty unless cpqRackEventAlertingElementFormat value is other(1)" ::= { cpqRackEventInfo 15 } cpqRackEventImpactedDomain OBJECT-TYPE SYNTAX INTEGER { unknown(1), cluster(2), complex(3), enclosure(4), system(5), partition(6) } ACCESS read-only STATUS optional DESCRIPTION "ImpactedDomain is an enumerated value indicating the domain this event affects." ::= { cpqRackEventInfo 16 } cpqRackEventComplexName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the complex." ::= { cpqRackEventInfo 17 } cpqRackEventPartitionId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS optional DESCRIPTION "The Unique Identifier for the Partition. The format of the partitionId will be of the form nparId:vparId." ::= { cpqRackEventInfo 18 } cpqRackEventTriggeringLogIDTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqRackEventTriggeringLogIDEntry ACCESS not-accessible STATUS optional DESCRIPTION "A table of rack of Low Level LOG IDs." ::= { cpqRackEventInfo 19 } cpqRackEventTriggeringLogIDEntry OBJECT-TYPE SYNTAX CpqRackEventTriggeringLogIDEntry ACCESS not-accessible STATUS optional DESCRIPTION "The list of Low level LOG ID which were used to generate this event. The format of the value contained in this array is defined using the TriggeringLogIDFormat field." INDEX { cpqRackEventTriggeringLogID } ::= { cpqRackEventTriggeringLogIDTable 1 } CpqRackEventTriggeringLogIDEntry ::= SEQUENCE { cpqRackEventTriggeringLogID OCTET STRING } cpqRackEventTriggeringLogID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) ACCESS read-only STATUS optional DESCRIPTION "A Low Lvevel LOG ID which were used to generate this event." ::= {cpqRackEventTriggeringLogIDEntry 1 } cpqRackEventTriggeringLogIDFormat OBJECT-TYPE SYNTAX INTEGER { unknown(1), cimObjectPath(2) } ACCESS read-only STATUS optional DESCRIPTION "The format of the TriggeringLogID property which interpretable based upon the value of this property. Values are defined as: 1 - unknown. The format is unknown or not meaningfully interpretable by a CIM client application. 2 - cimObjectPath. The format is a CIMObjectPath, with format specifying an instance in the CIM Schema." ::= { cpqRackEventInfo 20 } cpqRackEventAlertType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The event alert type." ::= { cpqRackEventInfo 21 } cpqRackEventOtherAlertType OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..33)) ACCESS read-only STATUS optional DESCRIPTION "The event other alert type. It is empty unless cpqRackEventAlertType value is other." ::= { cpqRackEventInfo 22 } cpqRackEventProbableCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "An enumerated value that describes the probable cause of the error." ::= { cpqRackEventInfo 23 } cpqRackEventProbableCauseDescription OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (0..1024)) ACCESS read-only STATUS optional DESCRIPTION "A free-form string describing the probable cause of the error." ::= { cpqRackEventInfo 24 } cpqRackEventPerceivedSeverity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "An enumerated value that describes the severity of the Indication from the point of view of the notifier." ::= { cpqRackEventInfo 25 } cpqRackEventOtherSeverity OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "Other perceived severity. It is empty unless cpqRackEventPerceivedSeverity value is other." ::= { cpqRackEventInfo 26 } cpqRackEventTrending OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The event trending." ::= { cpqRackEventInfo 27 } cpqRackEventRecommendedActions OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (0..1024)) ACCESS read-only STATUS optional DESCRIPTION "A free-form string describing recommended actions to take to resolve the error." ::= { cpqRackEventInfo 28 } cpqRackEventID OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "An instrumentation or provider specific value that describes the underlying real-world event represented by the indication related to the not-OK status." ::= { cpqRackEventInfo 29 } cpqRackEventTime OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..33)) ACCESS read-only STATUS optional DESCRIPTION "The event time." ::= { cpqRackEventInfo 30 } cpqRackEventSystemCreationClassName OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The event system creation class name." ::= { cpqRackEventInfo 31 } cpqRackEventSystemName OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The event system name." ::= { cpqRackEventInfo 32 } cpqRackEventProviderName OBJECT-TYPE SYNTAX DisplayString ( SIZE (0..64)) ACCESS read-only STATUS optional DESCRIPTION "The name of the Provider that generated the indication related to the not-OK status." ::= { cpqRackEventInfo 33 } -- **************************************************************************** -- Rack Information Trap Definitions -- ================================= -- -- The SNMP trap messages must not be bigger than 484 octets (bytes). -- -- Trap support in an SNMP agent implementation is optional. An SNMP -- agent implementation may support all, some, or none of the traps. -- If traps are supported, The user should be provided with the option of -- disabling traps. -- ************************************************************************** cpqRackNameChanged TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackSerialNum, cpqRackTrapSequenceNum } DESCRIPTION "Rack name has changed. This trap signifies that an agent or utility has changed the name of the rack. Each of the server blades in each of the enclosure within the rack will be updated to reflect the new rack name. It may take several minutes for the rack name change to be propagated throughout the entire rack. User Action: None." --#TYPE "Rack name changed (22001)" --#SUMMARY "The rack name has changed to %s." --#ARGUMENTS {2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22001 cpqRackEnclosureNameChanged TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureModel, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure name has changed. This trap signifies that an agent or utility has changed the name of an enclosure within the rack. Each of the components within the rack will be updated to reflect the new enclosure name. It may take several minutes for the enclosure name change to be propagated throughout the entire enclosure. User Action: None." --#TYPE "Enclosure name changed (22002)" --#SUMMARY "The enclosure name has changed to %s in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22002 cpqRackEnclosureRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureModel, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure has been removed. This trap signifies that an enclosure has been removed from the rack. User Action: None." --#TYPE "Enclosure removed (22003)" --#SUMMARY "The enclosure %s has been removed from rack %s." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22003 cpqRackEnclosureInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureModel, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure has been inserted. This trap signifies that an enclosure has been inserted into the rack. User Action: None." --#TYPE "Enclosure inserted (22004)" --#SUMMARY "The enclosure %s has been inserted into rack %s." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22004 cpqRackEnclosureTempFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTempLocation, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure temperature status has been set to failed. This trap signifies that a enclosure temperature sensor has been tripped indicating an overheat condition. User Action: Shutdown the enclosure and possibly the rack as soon as possible. Ensure all fans are working properly and that air flow in the rack has not been blocked." --#TYPE "Enclosure temperature failed (22005)" --#SUMMARY "The temperature sensor %s in enclosure %s in rack %s has been set to failed." --#ARGUMENTS {6, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY THERMAL --#ACTION "Shutdown the enclosure and possibly the rack as soon as possible. Ensure all fans are working properly and that air flow in the rack has not been blocked." ::= 22005 cpqRackEnclosureTempDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTempLocation, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure temperature status has been set to degraded. This trap signifies that an enclosure temperature sensor has been tripped indicating a possible overheat condition. User Action: Shutdown the enclosure and possibly the rack as soon as possible. Ensure all fans are working properly and that air flow in the rack has not been blocked." --#TYPE "Enclosure temperature degraded (22006)" --#SUMMARY "The temperature sensor %s in enclosure %s in rack %s has been set to degraded." --#ARGUMENTS {6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY THERMAL --#ACTION "Shutdown the enclosure and possibly the rack as soon as possible. Ensure all fans are working properly and that air flow in the rack has not been blocked." ::= 22006 cpqRackEnclosureTempOk TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTempLocation, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure temperature status has been set to ok. This trap signifies that an enclosure temperature sensor has returned to normal. User Action: None." --#TYPE "Enclosure temperature ok (22007)" --#SUMMARY "The temperature sensor %s in enclosure %s in rack %s has been set to ok." --#ARGUMENTS {6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY THERMAL ::= 22007 cpqRackEnclosureFanFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureFanLocation, cpqRackCommonEnclosureFanSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure fan status has been set to failed. This trap signifies that an enclosure fan has failed and no other fans in the redundant fan group are operating. This may result in overheating of the enclosure. User Action: Replace the fan as soon as possible." --#TYPE "Enclosure fan failed (22008)" --#SUMMARY "The fan %s in enclosure %s in rack %s has been set to failed." --#ARGUMENTS {6, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY THERMAL --#ACTION "Replace the failed enclosure fan." ::= 22008 cpqRackEnclosureFanDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureFanLocation, cpqRackCommonEnclosureFanSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure fan status has been set to degraded. This trap signifies that an enclosure fan has failed but other fans in the redundant fan group are still operating. This may result in overheating of the enclosure. User Action: Replace the fan as soon as possible." --#TYPE "Enclosure fan degraded (22009)" --#SUMMARY "The fan %s in enclosure %s in rack %s has been set to degraded." --#ARGUMENTS {6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY THERMAL --#ACTION "Replace the failing enclosure fan." ::= 22009 cpqRackEnclosureFanOk TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureFanLocation, cpqRackCommonEnclosureFanSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure fan status has been set to ok. This trap signifies that an enclosure fan has returned to normal operation. User Action: None." --#TYPE "Enclosure fan ok (22010)" --#SUMMARY "The fan %s in enclosure %s in rack %s has been set to ok." --#ARGUMENTS {6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY THERMAL ::= 22010 cpqRackEnclosureFanRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureFanLocation, cpqRackCommonEnclosureFanSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure fan has been removed. User Action: None." --#TYPE "Enclosure fan removed (22011)" --#SUMMARY "The fan %s in enclosure %s in rack %s has been removed." --#ARGUMENTS {6, 4, 2} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY THERMAL --#LIFECYCLE ::= 22011 cpqRackEnclosureFanInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureFanLocation, cpqRackCommonEnclosureFanSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The enclosure fan has been inserted. User Action: None." --#TYPE "Enclosure fan inserted (22012)" --#SUMMARY "The fan %s in enclosure %s in rack %s has been inserted." --#ARGUMENTS {6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY THERMAL --#LIFECYCLE ::= 22012 cpqRackPowerSupplyFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplySerialNum, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The power supply status has been set to failed. This trap signifies that a power supply has failed. User Action: Replace the power supply as soon as possible." --#TYPE "Rack power supply failed (22013)" --#SUMMARY "The power supply %s in enclosure %s in rack %s has been set to failed." --#ARGUMENTS {6, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY POWER --#ACTION "Replace the failed power supply." ::= 22013 cpqRackPowerSupplyDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplySerialNum, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The power supply status has been set to degraded. This trap signifies that a power supply has degraded. User Action: Replace the power supply as soon as possible." --#TYPE "Rack power supply degraded (22014)" --#SUMMARY "The power supply %s in enclosure %s in rack %s has been set to degraded." --#ARGUMENTS {6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Replace the failing power supply." ::= 22014 cpqRackPowerSupplyOk TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplySerialNum, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The power supply status has been set to ok. This trap signifies that a power supply has returned to normal operation. User Action: None." --#TYPE "Rack power supply ok (22015)" --#SUMMARY "The power supply %s in enclosure %s in rack %s has been set to ok." --#ARGUMENTS {6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY POWER ::= 22015 cpqRackPowerSupplyRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplySerialNum, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The power supply has been removed. User Action: None." --#TYPE "Rack power supply removed (22016)" --#SUMMARY "The power supply %s in enclosure %s in rack %s has been removed." --#ARGUMENTS {6, 4, 2} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#LIFECYCLE ::= 22016 cpqRackPowerSupplyInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplySerialNum, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The power supply has been inserted. User Action: None." --#TYPE "Rack power supply inserted (22017)" --#SUMMARY "The power supply %s in enclosure %s in rack %s has been inserted." --#ARGUMENTS {6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY POWER --#LIFECYCLE ::= 22017 cpqRackPowerSubsystemNotRedundant TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The rack power subsystem is no longer in a redundant state. User Action: Replace any failed power supplies as soon as possible to return the system to a redundant state." --#TYPE "Rack power subsystem not redundant (22018)" --#SUMMARY "The power subsystem in enclosure %s in rack %s is no longer redundant." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Replace any failed power supplies as soon as possible to return the system to a redundant state." --#CLEAR_PRIOR_EVENTS true ::= 22018 cpqRackPowerSubsystemLineVoltageProblem TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerSupplyEnclosureName, cpqRackPowerSupplyPosition, cpqRackPowerSupplyFWRev, cpqRackPowerSupplyInputLineStatus, cpqRackPowerSupplySparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The rack power supply detected an input line voltage problem. User Action: Check the power input for the power supply or replace any failed power supplies as soon as possible." --#TYPE "Rack power supply input voltage problem (22019)" --#SUMMARY "The rack power supply detected an input line voltage problem in power supply %s, enclosure %s, rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power input for the power supply or replace any failed power supplies as soon as possible." ::= 22019 cpqRackPowerSubsystemOverloadCondition TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerEnclosureName, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The rack power subsystem overload condition. User Action: Replace any failed power supplies as soon as possible to return the system to a redundant state." --#TYPE "Rack power subsystem overload condition (22020)" --#SUMMARY "The power subsystem in enclosure %s in rack %s is in an overload condition." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Replace any failed power supplies as soon as possible." --#CLEAR_PRIOR_EVENTS true ::= 22020 cpqRackPowerShedAutoShutdown TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server shutdown due to power shedding. The server blade was shutdown due to a lack of power. User Action: Check power connections or add power supplies." --#TYPE "Server shutdown due to power shedding (22021)" --#SUMMARY "The server shutdown due to lack of power blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power connections for problems, then add power supplies if necessary." ::= 22021 cpqRackServerPowerOnFailedNotRedundant TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server power on prevented to preserve redundancy. There is not enough power to power on the server blade and maintain redundancy for the other blades in the enclosure. User Action: Check power connections or add power supplies." --#TYPE "Server power on prevented to preserve redundancy (22022)" --#SUMMARY "Server power on prevented to preserve redundancy in blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power connections for problems, then add power supplies if necessary." ::= 22022 cpqRackServerPowerOnFailedNotEnoughPower TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Inadequate power to power on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies." --#TYPE "Inadequate power to power on (22023)" --#SUMMARY "Inadequate power to power on blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the power connections for problems, then add power supplies if necessary." ::= 22023 cpqRackServerPowerOnFailedEnclosureNotFound TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Inadequate power to power on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies." --#TYPE "Inadequate power to power on (22024)" --#SUMMARY "Inadequate power to power on blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the server enclosure connections for problems, then add power supplies if necessary." ::= 22024 cpqRackServerPowerOnFailedPowerChassisNotFound TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Inadequate power to power on. There is not enough power to power on the server blade. The power enclosure micro-controller was not found. User Action: Check power enclosure connections or add power supplies." --#TYPE "Inadequate power to power on (22025)" --#SUMMARY "Inadequate power to power on blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the power enclosure connections for problems, then add power supplies if necessary." ::= 22025 cpqRackServerPowerOnManualOverride TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server power on via manual override. The server blade was powered on by a manual override. User Action: None." --#TYPE "Server power on via manual override (22026)" --#SUMMARY "Server power on via manual override on blade %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY DEVICEBAY ::= 22026 cpqRackFuseOpen TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureFuseLocation, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Fuse open. The fuse has been tripped. User Action: Check enclosure and / or blade power connections and reset the fuse." --#TYPE "Fuse open (22027)" --#SUMMARY "Fuse open fuse %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY ENCLOSURE --#ACTION "Check the enclosure and blade power connections, then reset the fuse." ::= 22027 cpqRackServerBladeRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade removed. The server blade has been removed from the enclosure. User Action: None." --#TYPE "Server blade removed (22028)" --#SUMMARY "Server blade %s removed from position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22028 cpqRackServerBladeInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade inserted. The server blade has been inserted into the enclosure. User Action: None." --#TYPE "Server blade inserted (22029)" --#SUMMARY "Server blade %s inserted into position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22029 cpqRackPowerChassisNotLoadBalanced TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem not load balanced. The power subsystem is out of balance for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Add additional power supplies if needed." --#TYPE "Power subsystem not load balanced (22030)" --#SUMMARY "Power subsystem not load balanced in enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Add additional power supplies if needed." ::= 22030 cpqRackPowerChassisDcPowerProblem TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem DC power problem. There is a power subsystem DC power problem for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies." --#TYPE "Power subsystem DC power problem (22031)" --#SUMMARY "Power subsystem DC power problem in enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power enclosure and power supplies. Replace any failed or degraded power supplies." ::= 22031 cpqRackPowerChassisAcFacilityPowerExceeded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem AC facility input power exceeded. There is a power subsystem Power subsystem AC facility input power exceeded for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies." --#TYPE "Power subsystem AC facility input power exceeded (22032)" --#SUMMARY "Power subsystem AC facility input power exceeded in enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power enclosure and power supplies. Replace any failed or degraded power supplies." ::= 22032 cpqRackPowerUnknownPowerConsumption TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Unknown power consumption. There is an unknown power consumer drawing power. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies." --#TYPE "Unknown power consumption (22033)" --#SUMMARY "Unknown power consumption in rack %s." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the power enclosure and power supplies. Replace any failed or degraded power supplies." ::= 22033 cpqRackPowerChassisLoadBalancingWireMissing TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem load balancing wire missing. The power subsystem load balancing wire missing. User Action: Connect the load balancing wire." --#TYPE "Power subsystem load balancing wire missing (22034)" --#SUMMARY "Power subsystem load balancing wire missing for enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Connect the load balancing wire." ::= 22034 cpqRackPowerChassisTooManyPowerChassis TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem has too may power enclosures. The maximum number of power enclosures has been exceeded. User Action: Remove the extra power enclosure." --#TYPE "Power subsystem has too may power enclosures (22035)" --#SUMMARY "Power subsystem has too may power enclosures %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Remove the extra power enclosure." ::= 22035 cpqRackPowerChassisConfigError TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Power subsystem improperly configured. The power subsystem has been improperly configured. User Action: Check the cabling of the power enclosure." --#TYPE "Power subsystem improperly configured (22036)" --#SUMMARY "Power subsystem has been improperly configured in enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY POWER --#ACTION "Check the cabling of the power enclosure." ::= 22036 cpqRackEnclosureManagerDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator or other management processor status has been set to degraded. This trap signifies that either the Onboard Administrator(s) or its component(s) has degraded/failed, their firmware versions are mismatched, or one or more management processors is in a non-optimal operating state. User Action: For C-Class enclosures, please refer to the Onboard Administrator SYSLOG. For all the others please refer to product documentation for possible corrective actions" --#TYPE "Enclosure manager degraded (22037)" --#SUMMARY "The enclosure %s manager in rack %s has been set to degraded." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY OA --#ACTION "The following conditions can result in a degraded Onboard Administrator (OA): 1) one OA failed but the second OA is still operating, 2) one or more OAs is in a non-optimal operating state, 3) a firmware revision mismatch occurred between the primary and secondary OAs, or 4) OA RTC battery is low.  To determine what caused the issue, see the OA and check the logs for more information.  If a firmware mismatch occurred, use the OA UI or CLI (UPDATE IMAGE SYNC command) to resynchronize the firmware on the OAs.  If OA RTC battery is found to be low, replace battery." ::= 22037 cpqRackEnclosureManagerOk TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator or other management processor's status has been set to ok. This trap signifies that an Onboard Administrator or other management processor has returned to normal operation. User Action: None." --#TYPE "Onboard or management processor ok (22038)" --#SUMMARY "The Onboard Administrator or management processor %s in rack %s has been set to ok." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA ::= 22038 cpqRackEnclosureManagerRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator has been removed. User Action: None." --#TYPE "Onboard Administrator removed (22039)" --#SUMMARY "The Onboard Administrator %s in rack %s has been removed." --#ARGUMENTS {4, 2} --#SEVERITY MINOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22039 cpqRackEnclosureManagerInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator or other management processor has been inserted. User Action: None." --#TYPE "Onboard Administrator or other management processor inserted (22040)" --#SUMMARY "The Onboard Administrator or other management processor %s in rack %s has been inserted." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY OA --#LIFECYCLE ::= 22040 cpqRackManagerPrimaryRole TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator or other management processor has taken the role of primary. User Action: None." --#TYPE "Onboard Administrator or other management processor has taken the role of primary (UID)." --#SUMMARY "Onboard Administrator or other management processor has taken the role of primary, in enclosure %s, in rack %s." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY OA ::= 22041 cpqRackServerBladeEKeyingFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The server blade e-keying has failed. This trap signifies that a server blade e-keying has failed and there is a port mapping problem between a server mezz card and the interconnect. User Action: Reconfigure server blade mezz cards." --#TYPE "Server Blade e-keying failed (22042)" --#SUMMARY "Server blade %s e-keying failed in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Reconfigure the server blade mezz cards." ::= 22042 cpqRackServerBladeEKeyingOK TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The server blade e-keying is ok. This trap signifies that a server blade e-keying has returned to normal operation. User Action: None." --#TYPE "Server Blade e-keying ok (22043)" --#SUMMARY "Server blade %s e-keying is ok in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY ::= 22043 cpqRackNetConnectorRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackNetConnectorEnclosureName, cpqRackNetConnectorName, cpqRackNetConnectorLocation, cpqRackNetConnectorSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Interconnect removed. The interconnect has been removed from the enclosure. User Action: None." --#TYPE "Interconnect removed (22044)" --#SUMMARY "Interconnect %s removed from position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY INTERCONNECTBAY --#LIFECYCLE ::= 22044 cpqRackNetConnectorInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackNetConnectorEnclosureName, cpqRackNetConnectorName, cpqRackNetConnectorLocation, cpqRackNetConnectorSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Interconnect inserted. The interconnect has been inserted into the enclosure. User Action: None." --#TYPE "Interconnect inserted (22045)" --#SUMMARY "Interconnect %s inserted into position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY INTERCONNECTBAY --#LIFECYCLE ::= 22045 cpqRackNetConnectorFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackNetConnectorEnclosureName, cpqRackNetConnectorName, cpqRackNetConnectorLocation, cpqRackNetConnectorSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The interconnect status has been set to failed. This trap signifies that a interconnect has failed. User Action: Replace the interconnect as soon as possible." --#TYPE "Interconnect failed (22046)" --#SUMMARY "Interconnect %s failed in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE NONOPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY INTERCONNECTBAY --#ACTION "Refer to the OA and the status diagnostics reported for the interconnect." ::= 22046 cpqRackNetConnectorDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackNetConnectorEnclosureName, cpqRackNetConnectorName, cpqRackNetConnectorLocation, cpqRackNetConnectorSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The interconnect status has been set to degraded. This trap signifies that a interconnect has degraded. User Action: Refer to the OA and the status diagnostics reported for the interconnect." --#TYPE "Interconnect degraded (22047)" --#SUMMARY "Interconnect %s degraded in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY INTERCONNECTBAY --#ACTION "Refer to the OA and the status diagnostics reported for the interconnect." ::= 22047 cpqRackNetConnectorOk TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackNetConnectorEnclosureName, cpqRackNetConnectorName, cpqRackNetConnectorLocation, cpqRackNetConnectorSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The interconnect status has been set to ok. This trap signifies that a interconnect has returned to normal operation. User Action: None." --#TYPE "Interconnect ok (22048)" --#SUMMARY "Interconnect %s ok in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY INTERCONNECTBAY ::= 22048 cpqRackServerBladeToLowPower TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The server blade requested to low power. User Action: None." --#TYPE "Server Blade requested to low power (22049)" --#SUMMARY "Server blade %s requested to low power in position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY ::= 22049 cpqRackServerBladeRemoved2 TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade removed. The server blade has been removed from the enclosure. User Action: None." --#TYPE "Server blade removed (22050)" --#SUMMARY "Server blade %s removed from position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22050 cpqRackServerBladeInserted2 TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade inserted. The server blade has been inserted into the enclosure. User Action: None." --#TYPE "Server blade inserted (22051)" --#SUMMARY "Server blade %s inserted into position %s, in enclosure %s, in rack %s." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22051 cpqRackServerBladeStatusRepaired TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladeProductId, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade repaired. The server blade status has changed to OK. User Action: None." --#TYPE "Server blade repaired (22052)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s status has changed to OK." --#ARGUMENTS {5, 7, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY ::= 22052 cpqRackServerBladeStatusDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladeProductId, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeFaultMajor, cpqRackServerBladeFaultMinor, cpqRackServerBladeFaultDiagnosticString, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade health status Degraded. The server blade health status has changed to Degraded. User Action: Check blade server and enclosure SYSLOG." --#TYPE "Server blade health status degraded (22053)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s health status has changed to degraded. Reason: %s." --#ARGUMENTS {5, 7, 4, 2, 14} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the blade server and enclosure SYSLOG." ::= 22053 cpqRackServerBladeStatusCritical TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladeProductId, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeFaultMajor, cpqRackServerBladeFaultMinor, cpqRackServerBladeFaultDiagnosticString, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade health status Critical. The server blade health status has changed to Critical. User Action: Check blade server and enclosure SYSLOG." --#TYPE "Server blade health status critical (22054)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s health status has changed to critical. Reason: %s." --#ARGUMENTS {5, 7, 4, 2, 14} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the blade server and enclosure SYSLOG." ::= 22054 cpqRackServerBladeGrpCapTimeout TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The server blade is not responding to the group capper. The server blade is not responding to capping requests from the enclosure group capper User Action: Reset the iLO management processor." --#TYPE "Server blade not responding to group capping requests (22055)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s is not responding to requests from the enclosure group capper." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Reset the iLO management processor." ::= 22055 cpqRackServerBladeUnexpectedShutdown TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade shutdown unexpectadly. An unexpected shutdown event has occurred for this server blade. User Action: Check blade server and enclosure SYSLOG." --#TYPE "Server blade unexpected shutdown (22056)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has unexpectedly shutdown." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#ACTION "Check the blade server and enclosure SYSLOG." ::= 22056 cpqRackServerBladeMangementControllerFirmwareUpdating TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeManagementDeviceFirmwareFlashingStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade's management controller firmware updating. This server blade's management controller has started updating it's firmware. User Action: None." --#TYPE "Server blade management controller firmware update started (22057)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has started updating it's management controller firmware." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22057 cpqRackServerBladeMangementControllerFirmwareUpdateComplete TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeManagementDeviceFirmwareFlashingStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade's management controller firmware update has completed. This server blade's management controller has finished updating it's firmware. User Action: None." --#TYPE "Server blade management controller firmware update completed (22058)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has finished updating it's management controller firmware." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22058 cpqRackServerBladeSystemBIOSFirmwareUpdating TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeSystemBIOSFlashingStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade's system BIOS firmware updating. This server blade's system BIOS has started updating. User Action: None." --#TYPE "Server blade system BIOS firmware update started (22059)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has started updating it's system BIOS firmware." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22059 cpqRackServerBladeSystemBIOSFirmwareUpdateCompleted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeSystemBIOSFlashingStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade's system BIOS firmware update complete. This server blade's system BIOS has completed updating. User Action: None." --#TYPE "Server blade system BIOS firmware update completed (22060)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has completed updating it's system BIOS firmware." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22060 cpqRackServerBladeFrontIOBlankingActive TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeFrontIOBlankingModeStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has disabled front IO ports. Front IO blanking status has changed to active for this server blade. User Action: None." --#TYPE "Server blade front IO blanking active (22061)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has disabled front IO." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22061 cpqRackServerBladeRemoteFrontIOBlankingInactive TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeFrontIOBlankingModeStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has front IO blanking mode now inactive. Front IO blanking status has changed to inactive for this server blade. User Action: None." --#TYPE "Server blade front IO blanking inactive (22062)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has enabled front IO." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22062 cpqRackServerBladeDiagnosticAdaptorInserted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeDiagnosticAdaptorPresence, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade diagnostic adaptor inserted. Blade diagnostic adaptor status has changed to inserted for this server blade. User Action: None." --#TYPE "Server blade diagnostic adaptor inserted (22063)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s diagnostic adaptor inserted." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22063 cpqRackServerBladeDiagnosticAdaptorRemoved TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladeDiagnosticAdaptorPresence, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade diagnostic adaptor removed. Blade diagnostic adaptor status has changed to removed for this server blade. User Action: None." --#TYPE "Server blade diagnostic adaptor removed (22064)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s diagnostic adaptor removed." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22064 cpqRackServerBladeEnteredPXEBootMode TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePXEBootModeStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has entered PXE Boot Mode. Server blade Pre-Boot-eXecution (PXE) Mode started. User Action: None." --#TYPE "Server blade has entered PXE Boot Mode (22065)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has entered PXE Boot Mode." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22065 cpqRackServerBladeExitedPXEBootMode TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePXEBootModeStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has exited PXE Boot Mode. Server blade Pre-Boot-eXecution (PXE) Mode exited. User Action: None." --#TYPE "Server blade has exited PXE Boot Mode (22066)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has exited PXE Boot Mode." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22066 cpqRackServerBladeWarmReset TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePOSTStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has been warm reset. Server blade has experienced a warm reset. User Action: None." --#TYPE "Server blade warm reset occurred (22067)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has been warm reset." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22067 cpqRackServerBladePOSTCompleted TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePOSTStatus, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade system BIOS POST complete. Server blade has completed system BIOS Power-On-Self-Test (POST). User Action: None." --#TYPE "Server blade system BIOS POST completed (22068)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s system BIOS POST completed." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22068 cpqRackServerBladePoweredOn TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePowered, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has powered on. User Action: None." --#TYPE "Server blade has powered on (22069)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has powered on." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22069 cpqRackServerBladePoweredOff TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackServerBladePowered, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server blade has powered off. User Action: None." --#TYPE "Server blade has powered off (22070)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s has powered off." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22070 cpqRackInformationalEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "EAE Informational trap" --#TYPE "Generic EAE Informational trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY NONE ::= 22071 cpqRackMinorEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "EAE Minor trap" --#TYPE "Generic EAE Minor trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MINOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22072 cpqRackMajorEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "EAE Major trap" --#TYPE "Generic EAE Major trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MAJOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22073 cpqRackCriticalEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "EAE Critical trap" --#TYPE "Generic EAE Critical trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY NONE ::= 22074 cpqRackPowerMinorEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "FlexFabric Cmdr Power Subsystem Minor trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions." --#TYPE "Generic Power Subsystem EAE Minor trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MINOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22075 cpqRackPowerMajorEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "FlexFabric Cmdr Power Subsystem Major trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions." --#TYPE "Generic Power Subsystem EAE Major trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MAJOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22076 cpqRackPowerCriticalEAETrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent } DESCRIPTION "FlexFabric Cmdr Power Subsystem Critical trap. User Action: For FlexFabric Cmdr, please refer to product documentation for possible corrective actions." --#TYPE "Generic Power Subsystem EAE Critical trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY NONE ::= 22077 cpqRackServerBladePartitionChange TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackServerBladeEnclosureName, cpqRackServerBladeName, cpqRackServerBladePosition, cpqRackServerBladeSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackServerBladeSerialNum, cpqRackServerBladeUid, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "Server Blade Partition Changed trap. The server blade is part of a conjoined blade and its partition has changed. User Action: None." --#TYPE "Server blade partition changed (22078)" --#SUMMARY "Server blade %s in position %s, in enclosure %s, in rack %s partition has changed." --#ARGUMENTS {5, 6, 4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY DEVICEBAY --#LIFECYCLE ::= 22078 cpqRackInformationalWSMANTrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent, cpqRackEventIndicationIdentifier, cpqRackEventIndicationTime, cpqRackEventDescription, cpqRackEventSummary, cpqRackEventCategory, cpqRackOtherEventCategory, cpqRackEventSubCategory, cpqRackOtherEventSubCategory, cpqRackEventThreshold, cpqRackEventTimeWin, cpqRackEventActualThreshold, cpqRackEventActualTimeWin, cpqRackEventProviderVersion, cpqHoOsType, cpqHoVersion, cpqRackNetworkAddresses, cpqRackSerialNum, cpqRackEventAlertingElementFormat, cpqRackEventOtherAlertingElementFormat, cpqRackEventImpactedDomain, cpqRackEventComplexName, cpqRackEventPartitionId, cpqRackEventTriggeringLogID, cpqRackEventTriggeringLogIDFormat, cpqRackHWPartNumber, cpqRackHWFirmwareVersion, cpqRackHWManufacturer, cpqRackHWSerialNumber, cpqRackHWFRUDetails, cpqRackHWDevicePermanentNameFormat, cpqRackHWOtherPermanentNameFormat, cpqRackEventAlertType, cpqRackEventOtherAlertType, cpqRackEventProbableCause, cpqRackEventProbableCauseDescription, cpqRackEventPerceivedSeverity, cpqRackEventOtherSeverity, cpqRackEventTrending, cpqRackEventRecommendedActions, cpqRackEventID, cpqRackEventTime, cpqRackEventSystemCreationClassName, cpqRackEventSystemName, cpqRackEventProviderName } DESCRIPTION "WSMAN Informational trap" --#TYPE "Generic WSMAN Informational trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY NONE ::= 22079 cpqRackMinorWSMANTrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent, cpqRackEventIndicationIdentifier, cpqRackEventIndicationTime, cpqRackEventDescription, cpqRackEventSummary, cpqRackEventCategory, cpqRackOtherEventCategory, cpqRackEventSubCategory, cpqRackOtherEventSubCategory, cpqRackEventThreshold, cpqRackEventTimeWin, cpqRackEventActualThreshold, cpqRackEventActualTimeWin, cpqRackEventProviderVersion, cpqHoOsType, cpqHoVersion, cpqRackNetworkAddresses, cpqRackSerialNum, cpqRackEventAlertingElementFormat, cpqRackEventOtherAlertingElementFormat, cpqRackEventImpactedDomain, cpqRackEventComplexName, cpqRackEventPartitionId, cpqRackEventTriggeringLogID, cpqRackEventTriggeringLogIDFormat, cpqRackHWPartNumber, cpqRackHWFirmwareVersion, cpqRackHWManufacturer, cpqRackHWSerialNumber, cpqRackHWFRUDetails, cpqRackHWDevicePermanentNameFormat, cpqRackHWOtherPermanentNameFormat, cpqRackEventAlertType, cpqRackEventOtherAlertType, cpqRackEventProbableCause, cpqRackEventProbableCauseDescription, cpqRackEventPerceivedSeverity, cpqRackEventOtherSeverity, cpqRackEventTrending, cpqRackEventRecommendedActions, cpqRackEventID, cpqRackEventTime, cpqRackEventSystemCreationClassName, cpqRackEventSystemName, cpqRackEventProviderName } DESCRIPTION "WSMAN Minor trap" --#TYPE "Generic WSMAN Minor trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MINOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22080 cpqRackMajorWSMANTrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent, cpqRackEventIndicationIdentifier, cpqRackEventIndicationTime, cpqRackEventDescription, cpqRackEventSummary, cpqRackEventCategory, cpqRackOtherEventCategory, cpqRackEventSubCategory, cpqRackOtherEventSubCategory, cpqRackEventThreshold, cpqRackEventTimeWin, cpqRackEventActualThreshold, cpqRackEventActualTimeWin, cpqRackEventProviderVersion, cpqHoOsType, cpqHoVersion, cpqRackNetworkAddresses, cpqRackSerialNum, cpqRackEventAlertingElementFormat, cpqRackEventOtherAlertingElementFormat, cpqRackEventImpactedDomain, cpqRackEventComplexName, cpqRackEventPartitionId, cpqRackEventTriggeringLogID, cpqRackEventTriggeringLogIDFormat, cpqRackHWPartNumber, cpqRackHWFirmwareVersion, cpqRackHWManufacturer, cpqRackHWSerialNumber, cpqRackHWFRUDetails, cpqRackHWDevicePermanentNameFormat, cpqRackHWOtherPermanentNameFormat, cpqRackEventAlertType, cpqRackEventOtherAlertType, cpqRackEventProbableCause, cpqRackEventProbableCauseDescription, cpqRackEventPerceivedSeverity, cpqRackEventOtherSeverity, cpqRackEventTrending, cpqRackEventRecommendedActions, cpqRackEventID, cpqRackEventTime, cpqRackEventSystemCreationClassName, cpqRackEventSystemName, cpqRackEventProviderName } DESCRIPTION "WSMAN Major trap" --#TYPE "Generic WSMAN Major trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY MAJOR --#TIMEINDEX 99 --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY NONE ::= 22081 cpqRackCriticalWSMANTrap TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureTrapSequenceNum, cpqRackLastEAEEvent, cpqRackEventIndicationIdentifier, cpqRackEventIndicationTime, cpqRackEventDescription, cpqRackEventSummary, cpqRackEventCategory, cpqRackOtherEventCategory, cpqRackEventSubCategory, cpqRackOtherEventSubCategory, cpqRackEventThreshold, cpqRackEventTimeWin, cpqRackEventActualThreshold, cpqRackEventActualTimeWin, cpqRackEventProviderVersion, cpqHoOsType, cpqHoVersion, cpqRackNetworkAddresses, cpqRackSerialNum, cpqRackEventAlertingElementFormat, cpqRackEventOtherAlertingElementFormat, cpqRackEventImpactedDomain, cpqRackEventComplexName, cpqRackEventPartitionId, cpqRackEventTriggeringLogID, cpqRackEventTriggeringLogIDFormat, cpqRackHWPartNumber, cpqRackHWFirmwareVersion, cpqRackHWManufacturer, cpqRackHWSerialNumber, cpqRackHWFRUDetails, cpqRackHWDevicePermanentNameFormat, cpqRackHWOtherPermanentNameFormat, cpqRackEventAlertType, cpqRackEventOtherAlertType, cpqRackEventProbableCause, cpqRackEventProbableCauseDescription, cpqRackEventPerceivedSeverity, cpqRackEventOtherSeverity, cpqRackEventTrending, cpqRackEventRecommendedActions, cpqRackEventID, cpqRackEventTime, cpqRackEventSystemCreationClassName, cpqRackEventSystemName, cpqRackEventProviderName } DESCRIPTION "WSMAN Critical trap" --#TYPE "Generic WSMAN Critical trap" --#SUMMARY "%s" --#ARGUMENTS {6} --#SEVERITY CRITICAL --#TIMEINDEX 99 --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY NONE ::= 22082 cpqRackEnclosureManagerLinkDown TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator Network Link is Down. The Onboard Administrator firmware has detected the loss of network link. User Action: Check network connection and configurations for the Onboard Administrator." --#TYPE "Onboard Administrator Link Down (22083)" --#SUMMARY "Onboard Administrator Link Down." --#ARGUMENTS { } --#SEVERITY CRITICAL --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY CRITICAL --#HWSTATUS_CATEGORY NETWORK --#ACTION "Check network connection and configurations for the Onboard Administrator." ::= 22083 cpqRackEnclosureManagerLinkUp TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureManagerLocation, cpqRackCommonEnclosureManagerSparePartNumber, cpqRackCommonEnclosureManagerSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The Onboard Administrator Network Link is Up. The Onboard Administrator firmware has detected the presence of network link. User Action: None." --#TYPE "Onboard Administrator Link Up (22084)" --#SUMMARY "Onboard Administrator Link Up." --#ARGUMENTS { } --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY NETWORKK ::= 22084 cpqRackErsCommFailure TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackCommonEnclosureName, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureSparePartNumber, cpqRackErsTransactionType, cpqRackErsConnectionModel, cpqRackErsFailureCode, cpqRackErsRemoteHost } DESCRIPTION "The Onboard Administrator to Insight Remote Support or Insight Online communication failed. User Action: Please check the connectivity to Insight Remote Support or Insight Online." --#TYPE "Onboard Administrator to Insight Remote Support or Insight Online communication failure (22085)" --#SUMMARY "Onboard Administrator in enclosure %s, in rack %s to Insight Remote Support or Insight Online communication failed." --#ARGUMENTS {4, 2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED --#SIMPLE_SEVERITY MAJOR --#HWSTATUS_CATEGORY REMOTESUPPORT --#ACTION "Please check the connectivity to Insight Remote Support or Insight Online." ::= 22085 cpqRackPowerSubsystemOverloadConditionRepaired TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqRackName, cpqRackUid, cpqRackPowerEnclosureName, cpqRackCommonEnclosureSparePartNumber, cpqRackCommonEnclosureSerialNum, cpqRackCommonEnclosureTrapSequenceNum } DESCRIPTION "The rack power subsystem overload condition repaired." --#TYPE "Rack power subsystem overload condition repaired (22086)" --#SUMMARY "The power subsystem overload condition in enclosure %s in rack %s is repaired." --#ARGUMENTS {4, 2} --#SEVERITY INFORMATIONAL --#TIMEINDEX 99 --#STATE OPERATIONAL --#SIMPLE_SEVERITY OK --#HWSTATUS_CATEGORY POWER ::= 22086 END