HP-ICF-BRIDGE DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI TruthValue, TimeStamp, TimeInterval FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF dot1dBasePortEntry FROM BRIDGE-MIB VlanIndex FROM Q-BRIDGE-MIB hpSwitch FROM HP-ICF-OID ConfigStatus FROM HP-ICF-TC hpSwitchStpPortEntry FROM CONFIG-MIB ifIndex FROM IF-MIB portCopyEntry FROM SMON-MIB; BridgeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Bridge Identifier as used in the Spanning Tree Protocol to uniquely identify a bridge." SYNTAX OCTET STRING (SIZE (8)) hpicfBridge MODULE-IDENTITY LAST-UPDATED "200609300000Z" -- September 30, 2006 ORGANIZATION "Hewlett-Packard Company Network Infrastructure Solutions" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary extensions to the standard Bridge MIBs." REVISION "200609300000Z" -- September 30, 2006 DESCRIPTION "Added 'hpicfBridgeMirrorSessionID' MIB object." REVISION "200609260000Z" -- September 26, 2006 DESCRIPTION "Added 'hpicfBridgeRstpAutoEdgePort' MIB object." REVISION "200608131738Z" -- Aug 08, 2006 DESCRIPTION "Added hpicfLoopProtect MIB and updated conformance statements." REVISION "200302200000Z" -- February 20, 2003 DESCRIPTION "Added 'mstpOperation' option to the 'hpicfBridgeRstpForceVersion' MIB object. Added 'ieee8021s' option to the 'hpicfBridgeRstpProtocolVersion' MIB object." REVISION "200205231738Z" -- May 23, 2002 DESCRIPTION "Added conformance information." REVISION "200110032050Z" -- October 3, 2001 DESCRIPTION "Modified hpicfBridgeRstp MIB to contain ConfigStatus." REVISION "200011030642Z" -- November 3, 2000 DESCRIPTION "Initial revision." ::= { hpSwitch 12 } hpicfBridgeObjects OBJECT IDENTIFIER ::= { hpicfBridge 1 } hpicfBridgeBase OBJECT IDENTIFIER ::= { hpicfBridgeObjects 1 } -- ********************************************************************** -- VLAN Objects -- ********************************************************************** hpicfBridgeMaxVlans OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the number of VLANs that the switch will support for dynamic use without requiring a reboot." ::= { hpicfBridgeBase 1 } hpicfBridgeVlanEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative status of VLAN support on this switch." ::= { hpicfBridgeBase 2 } hpicfBridgePrimaryVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The 802.1Q VLAN ID of the primary VLAN for this switch." ::= { hpicfBridgeBase 3 } hpicfBridgeVlanConfigStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "If one or more variables in this group has been reconfigured since the last reboot in such a way as to require a reboot to take effect, the value of this variable will be set to 'notInService'." ::= { hpicfBridgeBase 4 } -- ********************************************************************** -- GVRP Objects -- ********************************************************************** hpicfBridgeGvrp OBJECT IDENTIFIER ::= { hpicfBridgeObjects 2 } hpicfBridgeGvrpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeGvrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the GVRP port configurations on this switch." ::= { hpicfBridgeGvrp 1 } hpicfBridgeGvrpPortEntry OBJECT-TYPE SYNTAX HpicfBridgeGvrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GVRP information associated with a single port." AUGMENTS { dot1dBasePortEntry } ::= { hpicfBridgeGvrpPortTable 1 } HpicfBridgeGvrpPortEntry ::= SEQUENCE { hpicfBridgeGvrpRestrictedVlanReg TruthValue } hpicfBridgeGvrpRestrictedVlanReg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GVRP will only process protocol packets that concern themselves with known VLANs." ::= { hpicfBridgeGvrpPortEntry 1 } -- ********************************************************************** -- Rapid Reconfiguration Spanning Tree Objects -- ********************************************************************** hpicfBridgeRstp OBJECT IDENTIFIER ::= { hpicfBridgeObjects 4 } hpicfBridgeRstpForceVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatibility(0), rstpOperation(2), mstpOperation(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operational mode of Spanning Tree protocol: - stpCompatibility means protocol operates as STP protocol on all ports. - rstpOperation means protocol operates as Rapid Reconfiguration on all ports except on those ports where legacy system has been detected. - mstpOperation means protocol operates in native MSTP mode, this option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'." ::= { hpicfBridgeRstp 1 } hpicfBridgeRstpConfigStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService." ::= { hpicfBridgeRstp 2 } hpicfBridgeRstpProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ieee8021d(0), ieee8021w(2), ieee8021s(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol version currently running on switch - ieee8021d version of STP protocol, - ieee8021w Rapid Reconfiguration version of STP protocol, - ieee8021s Multiple STP (MSTP) protocol" ::= { hpicfBridgeRstp 3 } hpicfBridgeRstpAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operational status of the spanning tree protocol" ::= { hpicfBridgeRstp 4 } hpicfBridgeRstpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port-specific information for the Spanning Tree Protocol." ::= { hpicfBridgeRstp 5 } hpicfBridgeRstpPortEntry OBJECT-TYPE SYNTAX HpicfBridgeRstpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information maintained by every port about the Spanning Tree Protocol state for that port." INDEX { hpicfBridgeRstpPortIndex } ::= { hpicfBridgeRstpPortTable 1 } HpicfBridgeRstpPortEntry ::= SEQUENCE { hpicfBridgeRstpPortIndex INTEGER, hpicfBridgeRstpAdminEdgePort INTEGER, hpicfBridgeRstpOperEdgePort INTEGER, hpicfBridgeRstpAdminPointToPointMac INTEGER, hpicfBridgeRstpOperPointToPointMac TruthValue, hpicfBridgeRstpPortPathCost INTEGER, hpicfBridgeRstpForceBpduMigrationCheck TruthValue, hpicfBridgeRstpAutoEdgePort TruthValue, hpicfBridgeRstpPortBpduFiltering TruthValue } hpicfBridgeRstpPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1w" ::= { hpicfBridgeRstpPortEntry 1 } hpicfBridgeRstpAdminEdgePort OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate that port is connected to LAN segment that don't have any bridge connected to it" REFERENCE "IEEE P802.1w Clause 17.3; IEEE P802.1t Clause 18" ::= { hpicfBridgeRstpPortEntry 2 } hpicfBridgeRstpOperEdgePort OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reflects the value of the operEdgePort parameter, as defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this parameter is used by a Designated Port in order to determine how rapidly it may transition to the Forwarding Port State (see 17.23, Port Role Transitions state machine). The Bridge Detection state machine sets this parameter to the value of adminEdgePort (P802.1t 18.1.3) on initialization, and forces its value to FALSE if any BPDUs are received on the Port." REFERENCE "IEEE P802.1w Clause 17.3; IEEE P802.1t Clause 18" ::= { hpicfBridgeRstpPortEntry 3 } hpicfBridgeRstpAdminPointToPointMac OBJECT-TYPE SYNTAX INTEGER { forceTrue(1), forceFalse(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5." REFERENCE "IEEE P802.1w; IEEE P802.1t" ::= { hpicfBridgeRstpPortEntry 4 } hpicfBridgeRstpOperPointToPointMac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " true: This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment." REFERENCE "IEEE P802.1w; IEEE P802.1t" ::= { hpicfBridgeRstpPortEntry 5 } hpicfBridgeRstpPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Rapid Reconfiguration Port Path Cost - 32 bit values" REFERENCE "IEEE 802.1w" ::= { hpicfBridgeRstpPortEntry 6 } hpicfBridgeRstpForceBpduMigrationCheck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When operating in RST (version 2 or greater) mode writing TRUE(1) to this object forces this port to transmit RST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read." REFERENCE "IEEE P802.1w" ::= { hpicfBridgeRstpPortEntry 7 } hpicfBridgeRstpAutoEdgePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the value of 'autoEdgePort' parameter. This parameter is optional. It is used by the Bridge Detection state machine for the automatic identification of edge ports. The default is false." REFERENCE "IEEE 802.1D-2004" ::= { hpicfBridgeRstpPortEntry 8 } hpicfBridgeRstpPortBpduFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether or not BPDUs need to be filtered on this port. If the value is true the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false the BPDUs are being processed as usual. The default is false." REFERENCE "IEEE P802.1w" ::= { hpicfBridgeRstpPortEntry 9 } -- ********************************************************************** -- Loop Protection Objects -- ********************************************************************** -- Port Remediation Textual Convention LoopProtectReceiverAction::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " This TC describes the actions a port that receives a loop protection protocol packet can take. The disableTx(1) enumeration indicates that the sender of the loop protect packet will be disabled. The noDisable(2) enumeration indicates that no port is to be disabled." SYNTAX INTEGER { disableTx(1), noDisable(2) } hpicfBridgeLoopProtect OBJECT IDENTIFIER ::= { hpicfBridgeObjects 5 } hpicfBridgeLoopProtectNotifications OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 0 } hpicfBridgeLoopProtectBase OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 1 } hpicfBridgeLoopProtectPort OBJECT IDENTIFIER ::= { hpicfBridgeLoopProtect 2 } hpicfBridgeLoopProtectInterval OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds at which loop protection packets are transmitted. The default value is 5 seconds." ::= { hpicfBridgeLoopProtectBase 1 } hpicfBridgeLoopProtectTrapLoopDetectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2)." ::= { hpicfBridgeLoopProtectBase 2 } hpicfBridgeLoopProtectEnableTimer OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds to wait before reenabling a port disabled by loop protection. When a port is disabled by loop protection a reenable timer for the port is initialized with the value of this period. If the period is not equal to zero the port will be reenabled after the period has elapsed. Otherwise the port will remain disabled." ::= { hpicfBridgeLoopProtectBase 3 } hpicfBridgeLoopProtectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeLoopProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per-interface configuration for Loop Protection." ::= { hpicfBridgeLoopProtectPort 1 } hpicfBridgeLoopProtectPortEntry OBJECT-TYPE SYNTAX HpicfBridgeLoopProtectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Loop Protection configuration information for a single port." INDEX { ifIndex } ::= { hpicfBridgeLoopProtectPortTable 1 } HpicfBridgeLoopProtectPortEntry ::= SEQUENCE { hpicfBridgeLoopProtectPortEnable TruthValue, hpicfBridgeLoopProtectPortLoopDetected TruthValue, hpicfBridgeLoopProtectPortLastLoopTime TimeStamp, hpicfBridgeLoopProtectPortLoopCount Counter32, hpicfBridgeLoopProtectPortReceiverAction LoopProtectReceiverAction } hpicfBridgeLoopProtectPortEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether this port has Loop protection enabled. The default value is FALSE" ::= { hpicfBridgeLoopProtectPortEntry 1 } hpicfBridgeLoopProtectPortLoopDetected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's hpicfBridgeLoopProtectPortEnable is set to FALSE." ::= { hpicfBridgeLoopProtectPortEntry 2 } hpicfBridgeLoopProtectPortLastLoopTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set." ::= { hpicfBridgeLoopProtectPortEntry 3 } hpicfBridgeLoopProtectPortLoopCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "When the loop protect feature is enabled on the port this object counts the number of loops detected on the port. When the feature is disabled on the port the value of this object is set to 0." ::= { hpicfBridgeLoopProtectPortEntry 4 } hpicfBridgeLoopProtectPortReceiverAction OBJECT-TYPE SYNTAX LoopProtectReceiverAction MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the action taken when a Loop protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet will be disabled. When set to 'noDisable' the transmitting port will not be disabled." ::= { hpicfBridgeLoopProtectPortEntry 5 } -- ********************************************************************** -- hpicfBridgeLoopProtect Notifications -- ********************************************************************** hpicfBridgeLoopProtectLoopDetectedNotification NOTIFICATION-TYPE OBJECTS { ifIndex, hpicfBridgeLoopProtectPortLoopCount, hpicfBridgeLoopProtectPortReceiverAction} STATUS current DESCRIPTION "A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop has been detected by the loop protection protocol. Generation of this notification is controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent excessive notifications this trap is rate-limited to allow a maximum of 1 notifications every 30 seconds. Notifications that are not sent due to rate-limiting are dropped, and not queued up to be sent later." ::= { hpicfBridgeLoopProtectNotifications 1 } -- ********************************************************************** -- Local Mirror Session Objects -- ********************************************************************** hpicfBridgeMirrorSession OBJECT IDENTIFIER ::= { hpicfBridgeObjects 6 } hpicfBridgeMirrorSessionBase OBJECT IDENTIFIER ::= { hpicfBridgeMirrorSession 1 } hpicfBridgeMirrorSessionDestination OBJECT IDENTIFIER ::= { hpicfBridgeMirrorSession 2 } hpicfBridgeMirrorSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfBridgeMirrorSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains mirror session information related to a given specified destination. A mirror session is a group of one or more portCopyEntries all having the same specified destination. A given specified destination may be associated with more then one mirror session." ::= { hpicfBridgeMirrorSessionDestination 1 } hpicfBridgeMirrorSessionEntry OBJECT-TYPE SYNTAX HpicfBridgeMirrorSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfBridgeMirrorSessionEntry contains mirror session specific identification information." AUGMENTS { portCopyEntry } ::= { hpicfBridgeMirrorSessionTable 1 } HpicfBridgeMirrorSessionEntry ::= SEQUENCE { hpicfBridgeMirrorSessionID Integer32 } hpicfBridgeMirrorSessionID OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1 destination. However, multiple sources may be related to the same hpicfBridgeMirrorSessionID. To ensure that the hpicfBridgeMirrorSessionID is properly assigned, it can only be updated when the respective portCopyEntry object is in the notReady state. For non-mirroring transfers, the value should be set to 0. " DEFVAL { 1 } ::= { hpicfBridgeMirrorSessionEntry 1 } -- ********************************************************************** -- Conformance information -- ********************************************************************** hpicfBridgeConformance OBJECT IDENTIFIER ::= { hpicfBridge 2 } hpicfBridgeGroups OBJECT IDENTIFIER ::= { hpicfBridgeConformance 1 } hpicfBridgeCompliances OBJECT IDENTIFIER ::= { hpicfBridgeConformance 2 } hpicfBridgeNotGroups OBJECT IDENTIFIER ::= { hpicfBridgeConformance 3 } hpicfBridgeVlanBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeMaxVlans, hpicfBridgeVlanEnable, hpicfBridgePrimaryVlan, hpicfBridgeVlanConfigStatus } STATUS current DESCRIPTION "Basic VLAN configuration information that is not in the standard 802.1Q Bridge MIB." ::= { hpicfBridgeGroups 1 } hpicfBridgeGvrpPortGroup OBJECT-GROUP OBJECTS { hpicfBridgeGvrpRestrictedVlanReg } STATUS current DESCRIPTION "GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated." ::= { hpicfBridgeGroups 2 } hpicfBridgeRstpBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeRstpForceVersion, hpicfBridgeRstpConfigStatus, hpicfBridgeRstpProtocolVersion, hpicfBridgeRstpAdminStatus, hpicfBridgeRstpPortTable } STATUS current DESCRIPTION "Rapid Spanning Tree Protocol (RSTP) configuration information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP improves compatibility, some objects in this MIB will likely be deprecated." ::= {hpicfBridgeGroups 3 } hpicfBridgeLoopProtectBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeLoopProtectInterval, hpicfBridgeLoopProtectEnableTimer, hpicfBridgeLoopProtectTrapLoopDetectEnable, hpicfBridgeLoopProtectPortEnable, hpicfBridgeLoopProtectPortLoopDetected, hpicfBridgeLoopProtectPortLastLoopTime, hpicfBridgeLoopProtectPortLoopCount, hpicfBridgeLoopProtectPortReceiverAction } STATUS current DESCRIPTION "A collection of objects providing basic instrumentation and control of the HP Loop protection entity." ::= {hpicfBridgeGroups 4 } -- ********************************************************************** -- Notification groups -- ********************************************************************** hpicfBridgeLoopProtectNotGrp NOTIFICATION-GROUP NOTIFICATIONS { hpicfBridgeLoopProtectLoopDetectedNotification } STATUS current DESCRIPTION "Notifications for Loop protection." ::= { hpicfBridgeNotGroups 1 } hpicfBridgeMirrorSessionBaseGroup OBJECT-GROUP OBJECTS { hpicfBridgeMirrorSessionID } STATUS current DESCRIPTION "A collection of objects providing identification of a mirroring session entity." ::= {hpicfBridgeGroups 5 } -- ********************************************************************** -- Compliance statements -- ********************************************************************** hpicfBridgeCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1Q VLAN support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 1 } hpicfBridgeComplianceRevTwo MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 2 } hpicfBridgeComplianceRevThree MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." ::= { hpicfBridgeCompliances 3 } hpicfBridgeComplianceRevFour MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs." MODULE MANDATORY-GROUPS { hpicfBridgeVlanBaseGroup } GROUP hpicfBridgeGvrpPortGroup DESCRIPTION "Support for this group is required for switches that support GVRP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeRstpBaseGroup DESCRIPTION "Support for this group is required for switches that implement RSTP until such time as support for these objects is added to a standard MIB." GROUP hpicfBridgeMirrorSessionBaseGroup DESCRIPTION "Support for this group is mandatory for switches that implement the multi session mirroring (intelligent mirroring) feature." ::= { hpicfBridgeCompliances 4 } hpicfBridgeLoopProtectCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Switches with support for hpicfBridge loop protection objects." MODULE MANDATORY-GROUPS { hpicfBridgeLoopProtectBaseGroup, hpicfBridgeLoopProtectNotifications } GROUP hpicfBridgeLoopProtectBaseGroup DESCRIPTION "Support for this group is mandatory for switches that implement the loop protection feature." GROUP hpicfBridgeLoopProtectNotifications DESCRIPTION "Implementation of this group is mandatory for switches that implement the loop protection feature." ::= { hpicfBridgeCompliances 5 } END