HP-ICF-IP-ROUTING DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32 FROM SNMPv2-SMI PhysAddress, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB ipCidrRouteEntry, inetCidrRouteEntry FROM IP-FORWARD-MIB hpSwitch FROM HP-ICF-OID ipDefaultRouterEntry FROM IP-MIB; hpicfIpRouting MODULE-IDENTITY LAST-UPDATED "200704200000Z" -- Apr 20, 2007 ORGANIZATION "Hewlett-Packard Company Workgroup Networks Division" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains HP proprietary objects for managing IP Routing." REVISION "200704200000Z" -- Apr 20, 2007 DESCRIPTION "Added hpicfArpAgingTime." REVISION "200508130228Z" -- Aug 08, 2005 DESCRIPTION "Added hpicfInetCidrRouteTable augmenting inetCidrRouteTable." REVISION "200508050000Z" -- Aug 5, 2005 DESCRIPTION "Added import objects." REVISION "200305130228Z" -- May 13, 2003 DESCRIPTION "Added static route configuration objects." REVISION "200210312353Z" -- October 31, 2002 DESCRIPTION "Added Source Route Global Enable." REVISION "200205231738Z" -- May 23, 2002 DESCRIPTION "Added ICMP Rate Limiting and Directed Broadcast forwarding objects." REVISION "200007150022Z" -- July 15, 2000 DESCRIPTION "Initial revision." ::= { hpSwitch 15 } hpicfIpRoutingObjects OBJECT IDENTIFIER ::= { hpicfIpRouting 1 } -- ICMP Router Discovery Protocol objects hpicfIcmpRdisc OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 1 } hpicfRdiscAdminStatus OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status of the ICMP Router Discovery protocol." ::= { hpicfIcmpRdisc 1 } hpicfRdiscIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfRdiscIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per-interface configuration for the ICMP Router Discovery protocol." ::= { hpicfIcmpRdisc 2 } hpicfRdiscIfCfgEntry OBJECT-TYPE SYNTAX HpicfRdiscIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Router discovery configuration information for a single interface." INDEX { ifIndex } ::= { hpicfRdiscIfCfgTable 1 } HpicfRdiscIfCfgEntry ::= SEQUENCE { hpicfRdiscIfAdminStatus INTEGER, hpicfRdiscIfAdvertAddress INTEGER, hpicfRdiscIfMaxAdvertInterval Integer32, hpicfRdiscIfMinAdvertInterval Integer32, hpicfRdiscIfAdvertLifetime Integer32, hpicfRdiscIfPreference Integer32 } hpicfRdiscIfAdminStatus OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status of the ICMP Router Discovery protocol on this interface." ::= { hpicfRdiscIfCfgEntry 1 } hpicfRdiscIfAdvertAddress OBJECT-TYPE SYNTAX INTEGER{ multicast(1), broadcast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The destination address to be used for router advertisements on this interface. If the value of this object is 'multicast' (the default), router advertisements sent on this interface will be sent to the all-hosts multicast address, 224.0.0.1. If the value of this object is 'broadcast', router advertisements sent on this interface will be sent to the limitied broadcast address, 255.255.255.255." ::= { hpicfRdiscIfCfgEntry 2 } hpicfRdiscIfMaxAdvertInterval OBJECT-TYPE SYNTAX Integer32 (4..1800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time allowed between sending unsolicited Router Advertisements on this interface." ::= { hpicfRdiscIfCfgEntry 3 } hpicfRdiscIfMinAdvertInterval OBJECT-TYPE SYNTAX Integer32 (3..1800) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum time allowed between sending unsolicited Router Advertisements on this interface. Must be no greater than hpicfRdiscMaxAdvertInterval." ::= { hpicfRdiscIfCfgEntry 4 } hpicfRdiscIfAdvertLifetime OBJECT-TYPE SYNTAX Integer32 (4..9000) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value to b placed in the Lifetime field of Router Advertisements sent on this interface. Must be no less than hpicfRdiscMaxAdvertInterval." ::= { hpicfRdiscIfCfgEntry 5 } hpicfRdiscIfPreference OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The preferability of the router as a default router, relative to the other routers on the same subnet. Higher values are more preferable. The minimum value (0x80000000) is used to indicate that the router, even though it may be advertised, is not to be used by neighboring hosts as a default router." ::= { hpicfRdiscIfCfgEntry 6 } -- ICMP Rate Limiting Objects hpicfIcmpRateLimits OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 2 } hpicfIcmpBoxLimits OBJECT IDENTIFIER ::= { hpicfIcmpRateLimits 1 } hpicfIcmpReplyLimitEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable ICMP replies." ::= { hpicfIcmpBoxLimits 1 } hpicfIcmpReplyLimit OBJECT-TYPE SYNTAX INTEGER(0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of icmp replies to send per second." ::= { hpicfIcmpBoxLimits 2 } hpicfIcmpRedirectEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable redirect error messages.." ::= { hpicfIcmpBoxLimits 3 } hpicfIcmpDestUnreachEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable destination unreachable error messages." ::= { hpicfIcmpBoxLimits 4 } hpicfIcmpAddrMaskReplyEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable address mask replies." ::= { hpicfIcmpBoxLimits 5 } hpicfIcmpEchoBroadcastReplyEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable echo replies to directed broadcast echo requests.." ::= { hpicfIcmpBoxLimits 6 } -- hp BSD broadcast forwarding enable/disable flags hpicfGlobalIpConfig OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 3 } hpicfDBroadcastFwdEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable directed broadcast forwarding." ::= { hpicfGlobalIpConfig 1 } hpicfSourceRouteEnable OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable source routed forwarding." ::= { hpicfGlobalIpConfig 2 } hpicfIpMaximumPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of equal cost paths to a destination that we will add to the IP routing table." ::= { hpicfGlobalIpConfig 3 } -- HP Static Route Configuration objects hpicfIpStaticRouteConfig OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 4 } hpicfIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of configured IP static routes. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static routes. Rows configured in this table should be stored in non-volatile storage." ::= { hpicfIpStaticRouteConfig 1 } hpicfIpStaticRouteEntry OBJECT-TYPE SYNTAX HpicfIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static route table, containing information about a single configured static route. There are 3 legal cases for the indexing this table: 1. ((hpicfIpStaticRouteFwdAddrType == hpicfIpStaticRoutePrefixType) && (hpicfIpStaticRouteFwdAddr is IP address of appropriate type) && (hpicfIpStaticRouteFwdIfIndex == 0)) Normal, remote static route. hpicfIpStaticRouteType will be equal to 'remote'. Note that the first condition that the FwdAddrType must equal the PrefixType exactly is not strictly true. For example, in IPv6, it is quite legal and expected to configure a static route where the PrefixType is ipv6, and the Prefix is a 16 byte IPv6 destination address, but the FwdAddrType is ipv6z and the FwdAddr is a 20 byte scoped IPv6 link-local address. 2. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex != 0)) Interface route. Treated like a connected route. hpicfIpStaticRouteType will be equal to 'local'. 3. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex == 0)) Discard route. hpicfStaticRouteType will be equal to either 'reject' or 'discard'." INDEX { hpicfIpStaticRoutePrefixType, hpicfIpStaticRoutePrefix, hpicfIpStaticRoutePrefixLength, hpicfIpStaticRouteFwdAddrType, hpicfIpStaticRouteFwdAddr, hpicfIpStaticRouteFwdIfIndex } ::= { hpicfIpStaticRouteTable 1 } HpicfIpStaticRouteEntry ::= SEQUENCE { hpicfIpStaticRoutePrefixType InetAddressType, hpicfIpStaticRoutePrefix InetAddress, hpicfIpStaticRoutePrefixLength InetAddressPrefixLength, hpicfIpStaticRouteFwdAddrType InetAddressType, hpicfIpStaticRouteFwdAddr InetAddress, hpicfIpStaticRouteFwdIfIndex InterfaceIndexOrZero, hpicfIpStaticRouteType INTEGER, hpicfIpStaticRouteDistance Integer32, hpicfIpStaticRouteTag Unsigned32, hpicfIpStaticRouteStatus RowStatus } hpicfIpStaticRoutePrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of destination prefix specified by this route. The value 'dns(16)' is not supported. This object specifies the type of destination address prefix in the hpicfIpStaticRoutePrefix object." ::= { hpicfIpStaticRouteEntry 1 } hpicfIpStaticRoutePrefix OBJECT-TYPE SYNTAX InetAddress (SIZE(0..36)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination address prefix of this route. The type of address specified by this route is indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRoutePrefixType must be rejected. An attempt to create a row in which the value X of this object, logically ANDed with the value of the mask formed from the corresponding instance of the hpicfIpStaticRoutePrefixLength object, is not equal to X must be rejected, i.e., this prefix may not have any 'host' bits set." ::= { hpicfIpStaticRouteEntry 2 } hpicfIpStaticRoutePrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number of leading one bits which form the mask to be logically ANDed with a destination address before comparison with the corresponding instance of the hpicfIpStaticRoutePrefix object for a route match operation. An attempt to create a row in which the value of this object is longer than the maximum legal length of an address of the type indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object must be rejected. An attempt to create a row in which the value of the mask formed from this object logically ANDed with the value of the corresponding instance of the hpicfIpStaticRoutePrefix object is not equal to the hpicfIpStaticRoutePrefix." ::= { hpicfIpStaticRouteEntry 3 } hpicfIpStaticRouteFwdAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of forwarding address for this route. The value of this object must be equal either to 'unknown' or to a value appropriate for the corresponding instance of the hpicfIpStaticRoutePrefixType object. For non-remote routes, the value of this object must be 'unknown'." ::= { hpicfIpStaticRouteEntry 4 } hpicfIpStaticRouteFwdAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0..36)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "For remote routes, the value of the next specified router to use for forwarding packets to the destination specified by this route. Note that this router does not need to be directly connected. In the case where it is not, the actual routing table entry will use a next hop determined by looking up the best route to this forwarding address. For non-remote routes, the value of this object will be a zero-length string. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRouteFwdAddrType must be rejected. An attempt to create a row with a value for this object other than a zero-length string must be rejected if the corresponding instance of the hpicfIpStaticRouteFwdIfIndex object is non-zero." ::= { hpicfIpStaticRouteEntry 5 } hpicfIpStaticRouteFwdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "For remote routes, the value of this object must be zero. For reject or blackhole routes, the value of this object must be zero. For local routes, this object indicates the ifIndex of the local interface to use to reach this destination." ::= { hpicfIpStaticRouteEntry 6 } hpicfIpStaticRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), reject(2), local(3), remote(4), blackhole(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of route. The value 'other' is not supported, and is included only for compatiblity with the IP Forwarding Table MIB. The value 'local' indicates that the destination is treated as if it were directly connected. The value 'remote' indicates that the forwarding address will be used to reach the destination. The value 'reject' indicates that if this route is matched, a packet to the destination is discarded and a notification (e.g. ICMP error) is returned to the packet sender. The value 'blackhole' indicates that if the route is matched, a packet to the destination is silently dropped. The value of this object must be consistent with the forwarding address information used to index the route." DEFVAL { remote } ::= { hpicfIpStaticRouteEntry 7 } hpicfIpStaticRouteDistance OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance to associate with this static route. Routes with lower distances are preferred. By default, static routes are created with an administrative distance of 1, meaning they are preferred over all routes except directly connected routes. Setting a higher administrative distance for a route can be used for the following reasons: - by configuring multiple static routes to the same destination, one with the default distance and one with a higher distance, one can configure backup static routes - by configuring a static route with an administrative distance higher than the distance for a particular dynamic routing protocol, one can allow a static route to be overridden by dynamic routing information. Routes with an administrative distance of 255 will never be entered in the routing table." DEFVAL { 1 } ::= { hpicfIpStaticRouteEntry 8 } hpicfIpStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Tag value that can be used to filter redistribution of this route via route maps." DEFVAL { 0 } ::= { hpicfIpStaticRouteEntry 9 } hpicfIpStaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this route entry. All writable columns in this table can be modified while the corresponding row is active." ::= { hpicfIpStaticRouteEntry 10 } hpicfIpStaticNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpStaticNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of configured IP static neighbors. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static neighbors. Rows configured in this table should be stored in non-volatile storage." ::= { hpicfIpStaticRouteConfig 2 } hpicfIpStaticNeighborEntry OBJECT-TYPE SYNTAX HpicfIpStaticNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static neighbor table, containing information about a single configured static neighbor." INDEX { hpicfIpStaticNeighborIfIndex, hpicfIpStaticNeighborNetAddrType, hpicfIpStaticNeighborNetAddress } ::= { hpicfIpStaticNeighborTable 1 } HpicfIpStaticNeighborEntry ::= SEQUENCE { hpicfIpStaticNeighborIfIndex InterfaceIndex, hpicfIpStaticNeighborNetAddrType InetAddressType, hpicfIpStaticNeighborNetAddress InetAddress, hpicfIpStaticNeighborPhysAddress PhysAddress, hpicfIpStaticNeighborStatus RowStatus } hpicfIpStaticNeighborIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value for the interface used to reach this neighbor." ::= { hpicfIpStaticNeighborEntry 1 } hpicfIpStaticNeighborNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of network address specified by this entry. Only the values 'ipv4(1)' and 'ipv6(2)' are expected. This object specifies the type of neighbor network address prefix in the hpicfIpStaticNeighborNetAddress object." ::= { hpicfIpStaticNeighborEntry 2 } hpicfIpStaticNeighborNetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The neighbor network address of this configured static neighbor. The type of address specified by this entry is indicated by the corresponding instance of the hpicfIpStaticNeighborNetAddrType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticNeighborNetAddrType must be rejected." ::= { hpicfIpStaticNeighborEntry 3 } hpicfIpStaticNeighborPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The media-dependent physical address used to reach this neighbor. The size of this address depends on the media type of the interface identified by hpicfIpStaticNeighborIfIndex." ::= { hpicfIpStaticNeighborEntry 4 } hpicfIpStaticNeighborStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this neighbor entry. All writable columns in this table can be modified while the corresponding row is active." ::= { hpicfIpStaticNeighborEntry 5 } -- HP Routing table extensions hpicfIpRouteStats OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 5 } hpicfIpCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the ipCidrRouteTable." ::= { hpicfIpRouteStats 1 } hpicfIpCidrRouteEntry OBJECT-TYPE SYNTAX HpicfIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended information about a single route." AUGMENTS { ipCidrRouteEntry } ::= { hpicfIpCidrRouteTable 1 } HpicfIpCidrRouteEntry ::= SEQUENCE { hpicfIpCidrRouteDistance Integer32 } hpicfIpCidrRouteDistance OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative distance of this route." ::= { hpicfIpCidrRouteEntry 1 } hpicfInetCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the inetCidrRouteTable." ::= { hpicfIpRouteStats 2 } hpicfInetCidrRouteEntry OBJECT-TYPE SYNTAX HpicfInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended information about a single route." AUGMENTS { inetCidrRouteEntry } ::= { hpicfInetCidrRouteTable 1 } HpicfInetCidrRouteEntry ::= SEQUENCE { hpicfInetCidrRouteDistance Integer32, hpicfInetCidrRouteInfo OBJECT IDENTIFIER } hpicfInetCidrRouteDistance OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative distance of this route." ::= { hpicfInetCidrRouteEntry 1 } hpicfInetCidrRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's inetCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value." ::= { hpicfInetCidrRouteEntry 2 } -- HP Arp (address resolution protocol) objects hpicfArpInfo OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 6 } hpicfArpAgingTime OBJECT-TYPE SYNTAX Integer32 (0..16666666) MAX-ACCESS read-create STATUS current DESCRIPTION "The timeout period in minutes for aging out an arp entry in the arp cache. Default value is 20 minutes. Allowable values for the HP implementation are 1-1440 and 0. The value of 0 indicates that an infinite ageout is to be used. The value 16666666 minutes (32 years) is used internally to effectively indicate an infinite timeout." DEFVAL { 20 } ::= { hpicfArpInfo 1 } -- HP Default Router objects hpicfIpDefaultRouterPrefixInfo OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 7 } hpicfIpDefaultRouterPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpDefaultRouterPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of default routers learnt through auto-config This Table will be used in conjunction of ipDefaultRouterTable defined in RFC 4293 to get the attributes of the default routers learnt through auto-config" ::= { hpicfIpDefaultRouterPrefixInfo 1 } hpicfIpDefaultRouterPrefixEntry OBJECT-TYPE SYNTAX HpicfIpDefaultRouterPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the default router table, containing information about a single learnt default router" INDEX { hpicfIpDefaultRouterAddressType, hpicfIpDefaultRouterAddress, hpicfIpDefaultRouterIfIndex, hpicfIpDefaultRouterPrefixType, hpicfIpDefaultRouterPrefix, hpicfIpDefaultRouterPrefixLength} ::= { hpicfIpDefaultRouterPrefixTable 1 } HpicfIpDefaultRouterPrefixEntry ::= SEQUENCE { hpicfIpDefaultRouterAddressType InetAddressType, hpicfIpDefaultRouterAddress InetAddress, hpicfIpDefaultRouterIfIndex InterfaceIndex, hpicfIpDefaultRouterPrefixType InetAddressType, hpicfIpDefaultRouterPrefix InetAddress, hpicfIpDefaultRouterPrefixLength InetAddressPrefixLength, hpicfIpDefaultRouterPrefixOnLink TruthValue, hpicfIpDefaultRouterPrefixAutonomous TruthValue, hpicfIpDefaultRouterPrefixValidLifeTime Unsigned32, hpicfIpDefaultRouterPrefixPrefdLifeTime Unsigned32} hpicfIpDefaultRouterAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of the default router. The only supported type is IPV6 as of now" ::= { hpicfIpDefaultRouterPrefixEntry 1 } hpicfIpDefaultRouterAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the default router." ::= { hpicfIpDefaultRouterPrefixEntry 2 } hpicfIpDefaultRouterIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the default router." ::= { hpicfIpDefaultRouterPrefixEntry 3 } hpicfIpDefaultRouterPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the prefix." ::= { hpicfIpDefaultRouterPrefixEntry 4 } hpicfIpDefaultRouterPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix." ::= { hpicfIpDefaultRouterPrefixEntry 5 } hpicfIpDefaultRouterPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "Length of the prefix." ::= { hpicfIpDefaultRouterPrefixEntry 6 } hpicfIpDefaultRouterPrefixOnLink OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object has the value true (1) if the prefix can be used for on-link determination, otherwise the value is false(2)" ::= { hpicfIpDefaultRouterPrefixEntry 7 } hpicfIpDefaultRouterPrefixAutonomous OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object has the value true(1) if this prefix can be used for autonomous address configuration. If the value is false(2), the prefix is not used to autoconfigure a local interface address" ::= { hpicfIpDefaultRouterPrefixEntry 8 } hpicfIpDefaultRouterPrefixValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The valid life time for the router." ::= { hpicfIpDefaultRouterPrefixEntry 9 } hpicfIpDefaultRouterPrefixPrefdLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The preferred life time for the router." ::= { hpicfIpDefaultRouterPrefixEntry 10 } -- Default Router table extensions hpicfIpDefaultRouterProperties OBJECT IDENTIFIER ::= { hpicfIpRoutingObjects 8 } hpicfIpDefaultRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HP extensions to the ipDefaultRouterTable." ::= { hpicfIpDefaultRouterProperties 1 } hpicfIpDefaultRouterEntry OBJECT-TYPE SYNTAX HpicfIpDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended information about a single route." AUGMENTS { ipDefaultRouterEntry } ::= { hpicfIpDefaultRouterTable 1 } HpicfIpDefaultRouterEntry ::= SEQUENCE { hpicfIpDefaultRouterMTU Integer32, hpicfIpDefaultRouterHopLimit Integer32 } hpicfIpDefaultRouterMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The link MTU size advertised by the router. The selected Mlink TU may be different from this one." ::= { hpicfIpDefaultRouterEntry 1 } hpicfIpDefaultRouterHopLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The hop limit to be used by the host on outgoing packets." ::= { hpicfIpDefaultRouterEntry 2 } hpicfIpRoutingConformance OBJECT IDENTIFIER ::= { hpicfIpRouting 2 } hpicfIpRoutingGroups OBJECT IDENTIFIER ::= { hpicfIpRoutingConformance 1 } hpicfRdiscBaseGroup OBJECT-GROUP OBJECTS { hpicfRdiscAdminStatus } STATUS current DESCRIPTION "Basic ICMP Router Discovery configuration objects." ::= { hpicfIpRoutingGroups 1 } hpicfRdiscIfCfgGroup OBJECT-GROUP OBJECTS { hpicfRdiscIfAdminStatus, hpicfRdiscIfAdvertAddress, hpicfRdiscIfMaxAdvertInterval, hpicfRdiscIfMinAdvertInterval, hpicfRdiscIfAdvertLifetime, hpicfRdiscIfPreference } STATUS current DESCRIPTION "A collection of objects allowing per-interface configuration of ICMP Router Discovery operation." ::= { hpicfIpRoutingGroups 2 } hpicfIcmpReplyBaseGroup OBJECT-GROUP OBJECTS { hpicfIcmpRedirectEnable, hpicfIcmpDestUnreachEnable, hpicfIcmpAddrMaskReplyEnable, hpicfIcmpEchoBroadcastReplyEnable } STATUS current DESCRIPTION "A collection of objects allowing configuration of ICMP Redirect operation." ::= { hpicfIpRoutingGroups 3 } hpicfIcmpReplyLimitGroup OBJECT-GROUP OBJECTS { hpicfIcmpReplyLimitEnable, hpicfIcmpReplyLimit } STATUS current DESCRIPTION "A collection of objects allowing configuration of ICMP Reply rate limiting." ::= { hpicfIpRoutingGroups 4 } hpicfIpRouteCfgGroup OBJECT-GROUP OBJECTS { hpicfDBroadcastFwdEnable, hpicfSourceRouteEnable } STATUS current DESCRIPTION "A collection of objects allowing configuration of IP global enables." ::= { hpicfIpRoutingGroups 5 } hpicfIpStaticRouteGroup OBJECT-GROUP OBJECTS { hpicfIpStaticRouteType, hpicfIpStaticRouteDistance, hpicfIpStaticRouteTag, hpicfIpStaticRouteStatus } STATUS current DESCRIPTION "A collection of objects for configuring IP static routes." ::= { hpicfIpRoutingGroups 6 } hpicfIpStaticNeighborGroup OBJECT-GROUP OBJECTS { hpicfIpStaticNeighborPhysAddress, hpicfIpStaticNeighborStatus } STATUS current DESCRIPTION "A collection of objects for configuring IP static neighbors." ::= { hpicfIpRoutingGroups 7 } hpicfIpCidrRouteGroup OBJECT-GROUP OBJECTS { hpicfIpCidrRouteDistance } STATUS current DESCRIPTION "A collection of objects for retrieving extended information about routes in the routing table." ::= { hpicfIpRoutingGroups 8 } hpicfInetCidrRouteGroup OBJECT-GROUP OBJECTS { hpicfInetCidrRouteDistance, hpicfInetCidrRouteInfo } STATUS current DESCRIPTION "A collection of objects for retrieving extended information about routes in the routing table." ::= { hpicfIpRoutingGroups 9 } hpicfArpBaseGroup OBJECT-GROUP OBJECTS { hpicfArpAgingTime } STATUS current DESCRIPTION "Basic ARP (address resolution protocol) configuration objects." ::= { hpicfIpRoutingGroups 10 } hpicfIpRoutingCompliances OBJECT IDENTIFIER ::= { hpicfIpRoutingConformance 2 } hpicfIcmpRdiscCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches that support ICMP Router Discovery." MODULE MANDATORY-GROUPS { hpicfRdiscBaseGroup } GROUP hpicfRdiscIfCfgGroup DESCRIPTION "This group is recommended for implementations that allow configuring ICMP Router Discovery parameters for each interface." ::= { hpicfIpRoutingCompliances 1 } hpicfIcmpReplyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches that support ICMP Reply Limiting." MODULE MANDATORY-GROUPS { hpicfIcmpReplyBaseGroup } GROUP hpicfIcmpReplyLimitGroup DESCRIPTION "This group is mandatory for implementations that allow configuring ICMP Reply Limit configuration." ::= { hpicfIpRoutingCompliances 2 } hpicfIpRouterCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches." MODULE MANDATORY-GROUPS { hpicfRdiscBaseGroup, hpicfRdiscIfCfgGroup, hpicfIcmpReplyBaseGroup, hpicfIcmpReplyLimitGroup, hpicfIpRouteCfgGroup, hpicfIpStaticRouteGroup, hpicfIpStaticNeighborGroup, hpicfIpCidrRouteGroup } ::= { hpicfIpRoutingCompliances 3 } hpicfArpInfoCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP Routing switches that support ARP." MODULE MANDATORY-GROUPS { hpicfArpBaseGroup } ::= { hpicfIpRoutingCompliances 4 } END