HP-ICF-IPCONFIG DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv4, InetPortNumber FROM INET-ADDRESS-MIB ipNetToPhysicalEntry FROM IP-MIB ifIndex FROM IF-MIB hpicfCommon FROM HP-ICF-OID ipv4InterfaceEntry, ipv6InterfaceEntry, IpAddressOriginTC, IpAddressStatusTC FROM IP-MIB tunnelInetConfigEntry FROM TUNNEL-MIB; hpicfIpConfig MODULE-IDENTITY LAST-UPDATED "200702020000Z" -- JUNE 06,2007 ORGANIZATION "Hewlett Packard Company, ProCurve Networking Business" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes objects for basic IP address configuration and interface configuration for devices in the HP Integrated Communication Facility product line." REVISION "200702020000Z" -- JUNE 06, 2007 DESCRIPTION "Added hpicfIpv6NDDadAttempts to augment the hpicfIpv6GlobalConfigObjects." REVISION "200705300000Z" -- MAY 30, 2007 DESCRIPTION "Added hpicfIpv4InterfaceLocalProxyArp on to the hpicfIpv4InterfaceEntry." REVISION "200702020000Z" -- FEBRUARY 02, 2007 DESCRIPTION "Added hpicfIpv6InterfaceTable to augment the Ipv6InterfaceTable." REVISION "200612030000Z" -- DECEMBER 03, 2006 DESCRIPTION "Added hpicfUdpTunnelMirrorSessionID to augment the tunnelInetConfigEntry object in RFC4087." REVISION "200607070000Z" -- JULY 07, 2006 DESCRIPTION "Added hpicfUdpTunnelSrcPort to augment the tunnelInetConfigEntry object in RFC4087." REVISION "200508081600Z" -- August 08, 2005 DESCRIPTION "Initial version." ::= { hpicfCommon 10 } -- The HP ICF IP configuration group hpicfIpConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 1} -- The HP ICF Address group hpicfIpAddressObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 1} -- The HP ICF IPV4 interface group hpicfIpv4InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpConfigObjects 2} -- The HP ICF IPV6 config group hpicfIpv6ConfigObjects OBJECT IDENTIFIER ::= {hpicfIpConfig 3} -- The HP ICF IPV6 global config group hpicfIpv6GlobalConfigObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 1} hpicfIpv6NDObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 1} -- The HP ICF IPV6 ICMP group hpicfIpv6IcmpObjects OBJECT IDENTIFIER ::= {hpicfIpv6GlobalConfigObjects 2} -- The HP ICF IPV6 interface group hpicfIpv6InterfaceObjects OBJECT IDENTIFIER ::= {hpicfIpv6ConfigObjects 2} hpicfIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains manually configured IPv4 and IPv6 addresses for each interface. An entry in this table may not exist in the active state unless all objects in the entry are consistent. In particular, the value of hpicfIpAddressPrefixLength." ::= { hpicfIpAddressObjects 1 } hpicfIpAddressEntry OBJECT-TYPE SYNTAX HpicfIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfIpAddressEntry contains a single manually configured IP address." INDEX { ifIndex, hpicfIpAddressAddrType, hpicfIpAddressAddr } ::= { hpicfIpAddressTable 1 } HpicfIpAddressEntry ::= SEQUENCE { hpicfIpAddressAddrType InetAddressType, hpicfIpAddressAddr InetAddress, hpicfIpAddressPrefixLength InetAddressPrefixLength, hpicfIpAddressType INTEGER, hpicfIpAddressRowStatus RowStatus, hpicfIpAddressExtendedType INTEGER } hpicfIpAddressAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of IP address" ::= { hpicfIpAddressEntry 1 } hpicfIpAddressAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains. hpicfIpAddressAddr is always interpreted within the context of hpicfIpAddressAddrType." ::= { hpicfIpAddressEntry 2 } hpicfIpAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length associated with IP address." ::= { hpicfIpAddressEntry 3 } hpicfIpAddressType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP address type. For V4 addresses the value will be unicast." DEFVAL { unicast } ::= { hpicfIpAddressEntry 4 } hpicfIpAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the IP address entry." ::= { hpicfIpAddressEntry 5 } hpicfIpAddressExtendedType OBJECT-TYPE SYNTAX INTEGER { none(0), eui64(1), linkLocal(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP address type. For V4 addresses the value will be none. For V6 address it can be eui64 and linkLocal also." DEFVAL { none } ::= { hpicfIpAddressEntry 6 } -- Switch IP Address Table hpicfSwitchIpAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSwitchIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This read only table contains IPV4 and/or IPV6 addresses for each interface. These IP Addresses are either manually configured or obtained by a dynamic meathod (such as DHCP). This table will hold all manually configured IP Addresses that exist in hpicfIpAddressTable except for those entries that are not in active state (hpicfIpAddressRowStatus)." ::= { hpicfIpAddressObjects 2 } hpicfSwitchIpAddressEntry OBJECT-TYPE SYNTAX HpicfSwitchIpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfSwitchIpAddressEntry contains a single IP address." INDEX { ifIndex, hpicfSwitchIpAddressAddrType, hpicfSwitchIpAddressAddr } ::= { hpicfSwitchIpAddressTable 1 } HpicfSwitchIpAddressEntry ::= SEQUENCE { hpicfSwitchIpAddressAddrType InetAddressType, hpicfSwitchIpAddressAddr InetAddress, hpicfSwitchIpAddressPrefixLength InetAddressPrefixLength, hpicfSwitchIpAddressType INTEGER, hpicfSwitchIpAddressOrigin IpAddressOriginTC, hpicfSwitchIpAddressStatus IpAddressStatusTC, hpicfSwitchIpAddressPreferredLifetime Unsigned32, hpicfSwitchIpAddressValidLifetime Unsigned32, hpicfSwitchIpAddressExtendedType INTEGER } hpicfSwitchIpAddressAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of IP address." ::= { hpicfSwitchIpAddressEntry 1 } hpicfSwitchIpAddressAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains. hpicfSwitchIpAddressAddr is always interpreted within the context of hpicfSwitchIpAddressAddrType." ::= { hpicfSwitchIpAddressEntry 2 } hpicfSwitchIpAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length associated with IP address." ::= { hpicfSwitchIpAddressEntry 3 } hpicfSwitchIpAddressType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP address type. For V4 addresses the value will be unicast." ::= { hpicfSwitchIpAddressEntry 4 } hpicfSwitchIpAddressOrigin OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-only STATUS current DESCRIPTION "The origin of the address." ::= { hpicfSwitchIpAddressEntry 5 } hpicfSwitchIpAddressStatus OBJECT-TYPE SYNTAX IpAddressStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1)." DEFVAL { preferred } ::= { hpicfSwitchIpAddressEntry 6 } hpicfSwitchIpAddressPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining length of time in seconds that this address will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated address should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 addresses is 4,294,967,295 (infinity)." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" ::= { hpicfSwitchIpAddressEntry 7 } hpicfSwitchIpAddressValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining length of time, in seconds, that this address will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated address should not appear as the destination or source address of a packet. The default for IPv4 addresses is 4,294,967,295 (infinity)." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" ::= { hpicfSwitchIpAddressEntry 8 } hpicfSwitchIpAddressExtendedType OBJECT-TYPE SYNTAX INTEGER { none(0), eui64(1), linkLocal(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP address type. For V4 addresses the value will be none. For V6 address it can be eui64 and linkLocal also." DEFVAL { none } ::= { hpicfSwitchIpAddressEntry 9 } hpicfIpNetToPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments ipNeTtoPhysicalTable" ::= {hpicfIpAddressObjects 3 } hpicfIpNetToPhysicalEntry OBJECT-TYPE SYNTAX HpicfIpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments ipNeTtoPhysicalTable" AUGMENTS { ipNetToPhysicalEntry } ::= { hpicfIpNetToPhysicalTable 1 } HpicfIpNetToPhysicalEntry ::= SEQUENCE { hpicfIpNetToPhysicalPort Integer32 } hpicfIpNetToPhysicalPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object gives the port through which the physical address was learnt" ::= { hpicfIpNetToPhysicalEntry 1} -- V4 Interface Table hpicfIpv4InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpv4InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains per-interface IPV4 configuration information." ::= { hpicfIpv4InterfaceObjects 1 } hpicfIpv4InterfaceEntry OBJECT-TYPE SYNTAX HpicfIpv4InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfIpv4InterfaceEntry contains IPV4 interface specific configuration information. This table is indexed by ipv4InterfaceIfIndex." AUGMENTS { ipv4InterfaceEntry } ::= { hpicfIpv4InterfaceTable 1 } HpicfIpv4InterfaceEntry ::= SEQUENCE { hpicfIpv4InterfaceDhcpEnable INTEGER, hpicfIpv4InterfaceForwarding INTEGER, hpicfIpv4InterfaceProxyArp INTEGER, hpicfIpv4InterfaceLocalProxyArp INTEGER, hpicfIpv4InterfaceBootpGateway InetAddressIPv4 } hpicfIpv4InterfaceDhcpEnable OBJECT-TYPE SYNTAX INTEGER { full(1), off(2), inform(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Changing this flag to 'full' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface. Setting this flag to 'inform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server. Setting this flag to 'off' will allow manual IP configuration but disallow any DHCP configuration." DEFVAL { full } ::= { hpicfIpv4InterfaceEntry 1 } hpicfIpv4InterfaceForwarding OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag indicates whether this interface is forwarding the datagrams that were not addressed to this interface. Setting this flag to 'enabled' (the default) results in forwarding the datagrams that were not addressed to this interface. Setting this flag to 'disabled' results in ignoring datagrams that were not addressed to this entity." DEFVAL { enabled } ::= { hpicfIpv4InterfaceEntry 2 } hpicfIpv4InterfaceProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses from other subnets. If set to disabled (the default), the switch will not respond on ARP request for IP addresses from other subnets." DEFVAL { disabled } ::= { hpicfIpv4InterfaceEntry 3 } hpicfIpv4InterfaceLocalProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables local ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses within the local subnet. If set to disabled (the default), the switch will not respond on ARP request for IP addresses within the local subnet." DEFVAL { disabled } ::= { hpicfIpv4InterfaceEntry 4 } hpicfIpv4InterfaceBootpGateway OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-write STATUS current DESCRIPTION "This entry will contain the IP address of the BOOTP gateway for the interface." ::= { hpicfIpv4InterfaceEntry 5 } -- V6 Global Objects hpicfIpv6NDDadAttempts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value in this object indicates the maximum number of neighbour solicitation requests that will be sent while performing duplicate address detection." ::= { hpicfIpv6NDObjects 1 } -- V6 Global Icmp Objects hpicfIpv6IcmpErrorInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value in this object indicates the error interval in which the token bucket algorithm places one token in the bucket for ICMPV6 rate limiting.Each token represents the right to send one ICMP error message. Each time an error is sent, it takes a token from the bucket. ICMP will not be allowed to originate an error message if the bucket is empty." ::= { hpicfIpv6IcmpObjects 1 } hpicfIpv6IcmpBucketsize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value in this object indicates the maximum number of tokens that can be in the bucket." ::= { hpicfIpv6IcmpObjects 2 } -- V6 Interface Table hpicfIpv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains per-interface IPV6 configuration information." ::= { hpicfIpv6InterfaceObjects 1 } hpicfIpv6InterfaceEntry OBJECT-TYPE SYNTAX HpicfIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfIpv6InterfaceEntry contains IPV6 interface specific configuration information. This table is indexed by ipv6InterfaceIfIndex." AUGMENTS { ipv6InterfaceEntry } ::= { hpicfIpv6InterfaceTable 1 } HpicfIpv6InterfaceEntry ::= SEQUENCE { hpicfIpv6InterfaceDhcpMode INTEGER, hpicfIpv6InterfaceManual INTEGER, hpicfIpv6InterfaceAutoConfig INTEGER, hpicfIpv6InterfaceDhcpRapidCommit INTEGER, hpicfIpv6InterfaceDhcpRelay INTEGER, hpicfIpv6InterfaceCfgEnableStatus INTEGER } hpicfIpv6InterfaceDhcpMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), dhcpFull(1), dhcpInform(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this flag to 'dhcpFull' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface. Setting this flag to 'dhcpInform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server. Setting this flag to 'disabled' will not allow any of the above mentioned two configuration, but interface can have link-local, auto-config and manual ip-address." DEFVAL { disabled } ::= { hpicfIpv6InterfaceEntry 1 } hpicfIpv6InterfaceManual OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this flag to 'enabled' will allow manual IP address configuration but disallow any DHCP configuration." DEFVAL { disabled } ::= { hpicfIpv6InterfaceEntry 2 } hpicfIpv6InterfaceAutoConfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this flag to 'enabled' will allow host to configure automatically from default router. There may be multiple routers and in that scenario switch will add the addresses from all these routers" DEFVAL { disabled } ::= { hpicfIpv6InterfaceEntry 3 } hpicfIpv6InterfaceDhcpRapidCommit OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this flag to 'enabled' will allow the host to get address and configuration information from the dhcp server rapidly. This flag can be enabled only if the hpicfIpv6InterfaceDhcpMode object is set as dhcpFull. By default this flag is set to disabled." DEFVAL { disabled } ::= { hpicfIpv6InterfaceEntry 4 } hpicfIpv6InterfaceDhcpRelay OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag indicates whether this interface is dhcp-relay enabled. By default this flag is set to disabled." DEFVAL { enabled } ::= { hpicfIpv6InterfaceEntry 5 } hpicfIpv6InterfaceCfgEnableStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. Setting this object to up(1) will enable ipv6 for the given interface.Setting this object to down(2) will disable the ipv6 for the interface only if hpicfIpv6InterfaceDhcpMode, hpicfIpv6InterfaceManual and hpicfIpv6InterfaceAutoConfig are disabled.A get on this object reflects the data saved in a non-volatile storage. Note:To get the current ipv6 status for an interface refer to ipv6InterfaceEnableStatus." ::= { hpicfIpv6InterfaceEntry 6 } -- ********************************************************************** -- Remote mirroring tunnel Objects -- ********************************************************************** hpicfUdpTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfUdpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains per interface IPV4 Udp encapsulated tunnel specific configuration information." ::= { hpicfIpv4InterfaceObjects 3 } hpicfUdpTunnelEntry OBJECT-TYPE SYNTAX HpicfUdpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hpicfUdpTunnelEntry contains Udp encapsulated tunnel specific configuration information." AUGMENTS { tunnelInetConfigEntry } ::= { hpicfUdpTunnelTable 1 } HpicfUdpTunnelEntry ::= SEQUENCE { hpicfUdpTunnelSrcPort InetPortNumber, hpicfUdpTunnelMirrorSessionID Integer32 } hpicfUdpTunnelSrcPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is valid only for the remote mirroring source or destination switch. The value will be ignored otherwise. A value of 0 means that the UDP port is irrelevant for the tunnel type. If this value is non-zero it must be duplicated in the tunnelInetConfigID value (this will ensure that a given UDP port can only be associated once with a given tunnelInetConfigAddressType, tunnelInetConfigLocalAddress, tunnelInetConfigRemoteAddress, tunnelInetConfigEncapsMethod combination)." DEFVAL { 0 } ::= { hpicfUdpTunnelEntry 1 } hpicfUdpTunnelMirrorSessionID OBJECT-TYPE SYNTAX Integer32(0..512) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is valid only for a remote mirroring switch which interfaces with the source end of the tunnel. The value will be ignored otherwise. A value of 0 means that the mirror session ID is irrelevant for the tunnel type. " DEFVAL { 0 } ::= { hpicfUdpTunnelEntry 2 } -- ********************************************************************** -- Conformance information -- ********************************************************************** hpicfIpConfigConformance OBJECT IDENTIFIER ::= {hpicfIpConfig 2} hpicfIpConfigCompliances OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 1} hpicfIpConfigGroups OBJECT IDENTIFIER ::= {hpicfIpConfigConformance 2} -- ********************************************************************** -- Compliance statements -- ********************************************************************** hpicfIpConfigCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION " A compliance statement for HP Routing switches with IP Configuration" MODULE MANDATORY-GROUPS { hpicfIpAddressTableGroup, hpicfIpv4InterfaceTableGroup, hpicfSwitchIpAddressTableGroup } OBJECT hpicfIpv4InterfaceDhcpEnable MIN-ACCESS read-write DESCRIPTION "An agent is not required to implement inform (3) state." ::= { hpicfIpConfigCompliances 1 } hpicfIpConfigCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION " A compliance statement for HP Routing switches with IP Configuration" MODULE MANDATORY-GROUPS { hpicfIpAddressTableGroup, hpicfIpv4InterfaceTableGroup, hpicfSwitchIpAddressTableGroup } GROUP hpicfUdpTunnelTableGroup DESCRIPTION "This group is valid only for the remote mirroring source or destination switch. The value will be ignored otherwise." OBJECT hpicfIpv4InterfaceDhcpEnable MIN-ACCESS read-write DESCRIPTION "An agent is not required to implement inform (3) state." ::= { hpicfIpConfigCompliances 2 } hpicfIpConfigCompliance4 MODULE-COMPLIANCE STATUS current DESCRIPTION " A compliance statement for HP Routing switches with IP Configuration" MODULE MANDATORY-GROUPS { hpicfIpAddressTableGroup, hpicfIpv4InterfaceTableGroup2, hpicfSwitchIpAddressTableGroup, hpicfIpv6InterfaceTableGroup } GROUP hpicfUdpTunnelTableGroup DESCRIPTION "This group is valid only for the remote mirroring source or destination switch. The value will be ignored otherwise." OBJECT hpicfIpv4InterfaceDhcpEnable MIN-ACCESS read-write DESCRIPTION "An agent is not required to implement inform (3) state." ::= { hpicfIpConfigCompliances 4 } hpicfIpAddressTableGroup OBJECT-GROUP OBJECTS { hpicfIpAddressPrefixLength, hpicfIpAddressType, hpicfIpAddressRowStatus, hpicfIpAddressExtendedType } STATUS current DESCRIPTION "A Collection of objects allowing configuration of an IP address for an interface." ::= { hpicfIpConfigGroups 1 } hpicfSwitchIpAddressTableGroup OBJECT-GROUP OBJECTS { hpicfSwitchIpAddressAddrType, hpicfSwitchIpAddressAddr} STATUS current DESCRIPTION "A Collection of objects providing interfaces addressing information." ::= { hpicfIpConfigGroups 2 } hpicfIpv4InterfaceTableGroup OBJECT-GROUP OBJECTS { hpicfIpv4InterfaceDhcpEnable, hpicfIpv4InterfaceForwarding, hpicfIpv4InterfaceProxyArp } STATUS deprecated DESCRIPTION "Deprecated - see hpicfIpv4InterfaceTableGroup2" ::= { hpicfIpConfigGroups 3 } hpicfUdpTunnelTableGroup OBJECT-GROUP OBJECTS { hpicfUdpTunnelSrcPort, hpicfUdpTunnelMirrorSessionID } STATUS current DESCRIPTION "A Collection of objects that allows IPV4 interface configuration for remote mirroring" ::= { hpicfIpConfigGroups 4 } hpicfIpv6InterfaceTableGroup OBJECT-GROUP OBJECTS { hpicfIpv6InterfaceDhcpMode, hpicfIpv6InterfaceManual, hpicfIpv6InterfaceAutoConfig, hpicfIpv6InterfaceDhcpRapidCommit, hpicfIpv6InterfaceDhcpRelay } STATUS current DESCRIPTION "A Collection of objects that allows IPV6 interface configuration" ::= { hpicfIpConfigGroups 5 } hpicfIpv4InterfaceTableGroup2 OBJECT-GROUP OBJECTS { hpicfIpv4InterfaceDhcpEnable, hpicfIpv4InterfaceForwarding, hpicfIpv4InterfaceProxyArp, hpicfIpv4InterfaceLocalProxyArp } STATUS current DESCRIPTION "A Collection of objects that allows IPV4 interface configuration" ::= { hpicfIpConfigGroups 6 } END