HP-ICF-RATE-LIMIT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI InterfaceIndex, ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF hpicfObjectModules, hpicfRateLimitTrapsPrefix FROM HP-ICF-OID ; hpicfRateLimitMIB MODULE-IDENTITY LAST-UPDATED "200708291120Z" -- August 29, 2007 ORGANIZATION "Hewlett Packard Company, Procurve Networking Business" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes HP rate limit information." REVISION "200708291120Z" -- August 29, 2007 DESCRIPTION "Deprecated all bps objects for hpEgressRateLimitPortConfigTable and hpIngressRateLimitPortConfigTable, and updated compliance information (including correcting ICMP group to be hpICMPRateLimitPortConfigGroup2)." REVISION "200707271920Z" -- July 27, 2007 DESCRIPTION "Modified enumerated type names for hpICMPRateLimitPortControlMode object." REVISION "200706011146Z" -- June 1, 2007 DESCRIPTION "Deprecated hpICMPRateLimitPortState in favor of new hpICMPRateLimitPortControlMode object." REVISION "200705301610Z" -- May 30, 2007 DESCRIPTION "Added Kbps configuration for ICMP, port-egress, and port-ingress rate-limiting definitions." REVISION "200607071833Z" -- July 07, 2006 DESCRIPTION "Added new egress rate limiting bps objects, and ingress rate-limiting definitions." REVISION "200504201130Z" -- April 20, 2005 DESCRIPTION "Added minimum bandwidth and egress rate limiting definitions." REVISION "200408221030Z" -- August 22, 2004 DESCRIPTION "Initial version." ::= { hpicfObjectModules 14 } hpicfRateLimitObjects OBJECT IDENTIFIER ::= { hpicfRateLimitMIB 1 } -- ICMP Rate Limiting Objects hpicfICMPRateLimitObjects OBJECT IDENTIFIER ::= { hpicfRateLimitObjects 1 } hpICMPRateLimitConfig OBJECT IDENTIFIER ::= { hpicfICMPRateLimitObjects 1 } hpICMPRateLimitPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpICMPRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains configuration objects on ICMP rate limit on a per interface basis." ::= { hpICMPRateLimitConfig 1 } hpICMPRateLimitPortConfigEntry OBJECT-TYPE SYNTAX HpICMPRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry that contains configuration objects on ICMP rate limit on a per interface basis" INDEX { hpICMPRateLimitPortConfigIndex } ::= { hpICMPRateLimitPortConfigTable 1 } HpICMPRateLimitPortConfigEntry ::= SEQUENCE { hpICMPRateLimitPortConfigIndex InterfaceIndex, hpICMPRateLimitPortState INTEGER, hpICMPRateLimitPortPrct Integer32, hpICMPRateLimitPortAlarmFlag INTEGER, hpICMPRateLimitPortKbps Integer32, hpICMPRateLimitPortControlMode INTEGER } hpICMPRateLimitPortConfigIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index associated with this entry." ::= { hpICMPRateLimitPortConfigEntry 1 } hpICMPRateLimitPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates whether ICMP rate limiting is enabled on the corresponding port. Because this is a State object it cannot distinguish between percent-based ICMP Rate-Limiting and the newer Kbps-based ICMP Rate-Limiting. Therefore, it has been deprecated in favor of hpICMPRateLimitPortControlMode." DEFVAL { disabled } ::= { hpICMPRateLimitPortConfigEntry 2 } hpICMPRateLimitPortPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the percent of ICMP rate limit on the port. The value of this object must be interpreted under the context of hpICMPRateLimitPortState. A value of 0 is not the same as disabling, but rather all ICMP traffic must be dropped." ::= { hpICMPRateLimitPortConfigEntry 3 } hpICMPRateLimitPortAlarmFlag OBJECT-TYPE SYNTAX INTEGER { clear(1), set(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether ICMP rate limiting alarm has been sent. When an alarm is sent, this object is set to set(2). Once a management station changes this object to clear(1), an alarm can be sent again for this port." DEFVAL { clear } ::= { hpICMPRateLimitPortConfigEntry 4 } hpICMPRateLimitPortKbps OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum Kilobits-per-second of ICMP traffic that may be received inbound on the port. The value of this object must be interpreted under the context of hpICMPRateLimitControlMode. A value of 0 is not the same as disabling, but means instead that all ICMP traffic must be dropped." ::= { hpICMPRateLimitPortConfigEntry 5 } hpICMPRateLimitPortControlMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), portPrct(2), portKbps(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode by which inbound ICMP traffic on this port will Rate-Limited. If icmpRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If icmpRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per- second rate for the entire port. When ICMP rate-limiting is disabled, there are no maximum controls on inbound ICMP traffic for this port." DEFVAL { disabled } ::= { hpICMPRateLimitPortConfigEntry 6 } hpICMPRateLimitPortNotification NOTIFICATION-TYPE OBJECTS { hpICMPRateLimitNotifyPortIndex } STATUS current DESCRIPTION "This notification indicates limit has exceeded." ::= { hpicfRateLimitTrapsPrefix 1 } hpICMPRateLimitNotifyPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The interface index associated with hpICMPRateLimitPortNotification event." ::= { hpicfICMPRateLimitObjects 2 } -- Egress Minimum Bandwidth Ojbects hpicfBWMinEgressObjects OBJECT IDENTIFIER ::= { hpicfRateLimitObjects 2 } hpBWMinEgressPortConfig OBJECT IDENTIFIER ::= { hpicfBWMinEgressObjects 1 } hpBWMinEgressPortNumQueues OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bandwidth minimum egress queues supported on this system." ::= { hpBWMinEgressPortConfig 1 } hpBWMinEgressPortPrctTable OBJECT-TYPE SYNTAX SEQUENCE OF HpBWMinEgressPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port's egress Guaranteed Minimum Bandwidth percent configurations on this switch. The number of entries in this table is determined by hpBWMinEgressPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinEgressPortNumQueues being the highest." ::= { hpBWMinEgressPortConfig 2 } hpBWMinEgressPortPrctEntry OBJECT-TYPE SYNTAX HpBWMinEgressPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's egress Guaranteed Minimum Bandwidth percent configuration." INDEX { ifIndex, hpBWMinEgressPortPrctQueue } ::= { hpBWMinEgressPortPrctTable 1 } HpBWMinEgressPortPrctEntry ::= SEQUENCE { hpBWMinEgressPortPrctQueue Integer32, hpBWMinEgressPortPrct Integer32 } hpBWMinEgressPortPrctQueue OBJECT-TYPE SYNTAX Integer32 (1..9000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinEgressPortNumQueues being the highest." ::= { hpBWMinEgressPortPrctEntry 1 } hpBWMinEgressPortPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of Guaranteed Minimum bandwidth to be assigned to this egress queue for this port. Total values for all queues must not exceed 100 percent." ::= { hpBWMinEgressPortPrctEntry 2 } -- Ingress Minimum Bandwidth Ojbects hpicfBWMinIngressObjects OBJECT IDENTIFIER ::= { hpicfRateLimitObjects 3 } hpBWMinIngressPortConfig OBJECT IDENTIFIER ::= { hpicfBWMinIngressObjects 1 } hpBWMinIngressPortNumQueues OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bandwidth minimum ingress queues supported on this system." ::= { hpBWMinIngressPortConfig 1 } hpBWMinIngressPortPrctTable OBJECT-TYPE SYNTAX SEQUENCE OF HpBWMinIngressPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port's ingress Guaranteed Minimum Bandwidth percent configurations on this switch. The number of entries in this table is determined by hpBWMinIngressPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinIngressPortNumQueues being the highest." ::= { hpBWMinIngressPortConfig 2 } hpBWMinIngressPortPrctEntry OBJECT-TYPE SYNTAX HpBWMinIngressPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's ingress Guaranteed Minimum Bandwidth percent configuration." INDEX { ifIndex, hpBWMinIngressPortPrctQueue } ::= { hpBWMinIngressPortPrctTable 1 } HpBWMinIngressPortPrctEntry ::= SEQUENCE { hpBWMinIngressPortPrctQueue Integer32, hpBWMinIngressPortPrct Integer32 } hpBWMinIngressPortPrctQueue OBJECT-TYPE SYNTAX Integer32 (1..9000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpBWMinIngressPortNumQueues being the highest." ::= { hpBWMinIngressPortPrctEntry 1 } hpBWMinIngressPortPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of Guaranteed Minimum bandwidth to be assigned to this ingress queue for this port. Total values for all queues must not exceed 100 percent." ::= { hpBWMinIngressPortPrctEntry 2 } -- Egress Rate Limiting Objects hpicfRateLimitPortObjects OBJECT IDENTIFIER ::= { hpicfRateLimitObjects 4 } hpRateLimitPortConfig OBJECT IDENTIFIER ::= { hpicfRateLimitPortObjects 1 } hpEgressRateLimitPortNumQueues OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of egress rate-limiting queues supported on this system." ::= { hpRateLimitPortConfig 1 } hpEgressRateLimitPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpEgressRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port egress Rate-Limiting configurations on this switch." ::= { hpRateLimitPortConfig 2 } hpEgressRateLimitPortConfigEntry OBJECT-TYPE SYNTAX HpEgressRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's egress Rate-Limiting configuration." INDEX { hpEgressRateLimitPortIndex } ::= { hpEgressRateLimitPortConfigTable 1 } HpEgressRateLimitPortConfigEntry ::= SEQUENCE { hpEgressRateLimitPortIndex InterfaceIndex, hpEgressRateLimitPortControlMode INTEGER, hpEgressRateLimitPortSingleControlPrct Integer32, hpEgressRateLimitPortSingleControlBps Unsigned32, hpEgressRateLimitPortSingleControlKbps Integer32 } hpEgressRateLimitPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which uniquely identifies a row in the Interfaces Table." ::= { hpEgressRateLimitPortConfigEntry 1 } hpEgressRateLimitPortControlMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), egressRateLimitPerPortOnly(2), egressRateLimitPerQueue(3), egressRateLimitPerPortOnlyBpsMode(4), egressRateLimitPerQueueBpsMode(5), egressRateLimitPerPortOnlyKbpsMode(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode by which this port will be Rate-Limited on egress. If egressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If egressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If egressRateLimitPerPortOnlyBpsMode is configured, there will be a single maximum bits-per-second rate for the entire port. If egressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If egressRateLimitPerQueueBpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in bits-per-second (again, the sum of these values must not exceed the maximum Bytes-per-second capability of the network link). The queues are defined under hpEgressRateLimitPortPrctTable. When egress rate-limiting is disabled, there are no maximum controls on egress for this port." DEFVAL { disabled } ::= { hpEgressRateLimitPortConfigEntry 2 } hpEgressRateLimitPortSingleControlPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress." ::= { hpEgressRateLimitPortConfigEntry 3 } hpEgressRateLimitPortSingleControlBps OBJECT-TYPE SYNTAX Unsigned32 (0..4200000000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnlyBpsMode, this value is the maximum bits-per-second of traffic that may be transmitted by this port on egress." ::= { hpEgressRateLimitPortConfigEntry 4 } hpEgressRateLimitPortSingleControlKbps OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of traffic that may be transmitted by this port on egress." ::= { hpEgressRateLimitPortConfigEntry 5 } hpEgressRateLimitPortPrctTable OBJECT-TYPE SYNTAX SEQUENCE OF HpEgressRateLimitPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port egress Rate-Limiting percent configurations on this switch. The number of entries in this table is determined by hpEgressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpEgressRateLimitPortNumQueues being the highest priority." ::= { hpRateLimitPortConfig 3 } hpEgressRateLimitPortPrctEntry OBJECT-TYPE SYNTAX HpEgressRateLimitPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's egress Rate-Limiting percent configuration." INDEX { hpEgressRateLimitPortIndex, hpEgressRateLimitPortPrctQueue } ::= { hpEgressRateLimitPortPrctTable 1 } HpEgressRateLimitPortPrctEntry ::= SEQUENCE { hpEgressRateLimitPortPrctQueue Integer32, hpEgressRateLimitPortPrct Integer32 } hpEgressRateLimitPortPrctQueue OBJECT-TYPE SYNTAX Integer32 (1..9000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue associated with this entry. The priority o of the queues is in ascending order, starting with queue one being the lowest and queue hpEgressRateLimitgressPortNumQueues being the highest." ::= { hpEgressRateLimitPortPrctEntry 1 } hpEgressRateLimitPortPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum percentage of traffic that may be transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use egressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that egress queue." ::= { hpEgressRateLimitPortPrctEntry 2 } hpEgressRateLimitPortBpsTable OBJECT-TYPE SYNTAX SEQUENCE OF HpEgressRateLimitPortBpsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table that contains information about the port egress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined by hpEgressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpEgressRateLimitPortNumQueues being the highest priority queue." ::= { hpRateLimitPortConfig 4 } hpEgressRateLimitPortBpsEntry OBJECT-TYPE SYNTAX HpEgressRateLimitPortBpsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The information associated with each port's egress Rate-Limiting bits-per-second configuration." INDEX { hpEgressRateLimitPortIndex, hpEgressRateLimitPortBpsQueue } ::= { hpEgressRateLimitPortBpsTable 1 } HpEgressRateLimitPortBpsEntry ::= SEQUENCE { hpEgressRateLimitPortBpsQueue Integer32, hpEgressRateLimitPortBps Unsigned32 } hpEgressRateLimitPortBpsQueue OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpEgressRateLimitgressPortNumQueues being the highest." ::= { hpEgressRateLimitPortBpsEntry 1 } hpEgressRateLimitPortBps OBJECT-TYPE SYNTAX Unsigned32 (0..4200000000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The maximum bits-per-second of traffic that may be transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use egressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that egress queue. The values for each queue must not exceed the bits-per-second capability of the current network link speed." ::= { hpEgressRateLimitPortBpsEntry 2 } -- Ingress Rate Limiting Objects hpicfIngressRateLimitPortObjects OBJECT IDENTIFIER ::= { hpicfRateLimitObjects 5 } hpRateLimitIngressPortConfig OBJECT IDENTIFIER ::= { hpicfIngressRateLimitPortObjects 1 } hpIngressRateLimitPortNumQueues OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ingress rate-limiting queues supported on this system." ::= { hpRateLimitIngressPortConfig 1 } hpIngressRateLimitPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HpIngressRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port ingress Rate-Limiting configurations on this switch." ::= { hpRateLimitIngressPortConfig 2 } hpIngressRateLimitPortConfigEntry OBJECT-TYPE SYNTAX HpIngressRateLimitPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's ingress Rate-Limiting configuration." INDEX { hpIngressRateLimitPortIndex } ::= { hpIngressRateLimitPortConfigTable 1 } HpIngressRateLimitPortConfigEntry ::= SEQUENCE { hpIngressRateLimitPortIndex InterfaceIndex, hpIngressRateLimitPortControlMode INTEGER, hpIngressRateLimitPortSingleControlPrct Integer32, hpIngressRateLimitPortSingleControlBps Unsigned32, hpIngressRateLimitPortSingleControlKbps Integer32 } hpIngressRateLimitPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which uniquely identifies a row in the Interfaces Table." ::= { hpIngressRateLimitPortConfigEntry 1 } hpIngressRateLimitPortControlMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), ingressRateLimitPerPortOnly(2), ingressRateLimitPerQueue(3), ingressRateLimitPerPortOnlyBpsMode(4), ingressRateLimitPerQueueBpsMode(5), ingressRateLimitPerPortOnlyKbpsMode(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode by which this port will be Rate-Limited on ingress. If ingressRateLimitPerPortOnly is configured, there will be a single maximum percentage-based rate for the entire port. If ingressRateLimitPerQueue is configured, the values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If ingressRateLimitPerPortOnlyBpsMode is configured, there will be a single maximum bits-per-second rate for the entire port. If ingressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If ingressRateLimitPerQueueBpsMode is configured, the maximum transmission-rate values for each of the queues will be expressed in bits-per-second (again, the sum of these values must not exceed the maximum Bytes-per-second capability of the network link). The queues are defined under hpIngressRateLimitPortPrctTable. When ingress rate-limiting is disabled, there are no maximum controls on ingress for this port." DEFVAL { disabled } ::= { hpIngressRateLimitPortConfigEntry 2 } hpIngressRateLimitPortSingleControlPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress." ::= { hpIngressRateLimitPortConfigEntry 3 } hpIngressRateLimitPortSingleControlBps OBJECT-TYPE SYNTAX Unsigned32 (0..4200000000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnlyBpsMode, this value is the maximum bits-per-second of traffic that may be transmitted by this port on ingress." ::= { hpIngressRateLimitPortConfigEntry 4} hpIngressRateLimitPortSingleControlKbps OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of traffic that may be transmitted by this port on ingress." ::= { hpIngressRateLimitPortConfigEntry 5} hpIngressRateLimitPortPrctTable OBJECT-TYPE SYNTAX SEQUENCE OF HpIngressRateLimitPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about the port ingress Rate-Limiting percent configurations on this switch. The number of entries in this table is determined by hpIngressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpIngressRateLimitPortNumQueues being the highest priority." ::= { hpRateLimitIngressPortConfig 3 } hpIngressRateLimitPortPrctEntry OBJECT-TYPE SYNTAX HpIngressRateLimitPortPrctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information associated with each port's ingress Rate-Limiting percent configuration." INDEX { hpIngressRateLimitPortIndex, hpIngressRateLimitPortPrctQueue } ::= { hpIngressRateLimitPortPrctTable 1 } HpIngressRateLimitPortPrctEntry ::= SEQUENCE { hpIngressRateLimitPortPrctQueue Integer32, hpIngressRateLimitPortPrct Integer32 } hpIngressRateLimitPortPrctQueue OBJECT-TYPE SYNTAX Integer32 (1..9000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpIngressRateLimitgressPortNumQueues being the highest." ::= { hpIngressRateLimitPortPrctEntry 1 } hpIngressRateLimitPortPrct OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum percentage of traffic that may be transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that ingress queue. The values for each queue must not exceed 100 percent." ::= { hpIngressRateLimitPortPrctEntry 2 } hpIngressRateLimitPortBpsTable OBJECT-TYPE SYNTAX SEQUENCE OF HpIngressRateLimitPortBpsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table that contains information about the port ingress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined by hpIngressRateLimitPortNumQueues. The priority of the queues is in ascending order, starting with queue one being the lowest priority and queue hpIngressRateLimitPortNumQueues being the highest priority queue." ::= { hpRateLimitIngressPortConfig 4 } hpIngressRateLimitPortBpsEntry OBJECT-TYPE SYNTAX HpIngressRateLimitPortBpsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The information associated with each port's egress Rate-Limiting bits-per-second configuration." INDEX { hpIngressRateLimitPortIndex, hpIngressRateLimitPortBpsQueue } ::= { hpIngressRateLimitPortBpsTable 1 } HpIngressRateLimitPortBpsEntry ::= SEQUENCE { hpIngressRateLimitPortBpsQueue Integer32, hpIngressRateLimitPortBps Unsigned32 } hpIngressRateLimitPortBpsQueue OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The queue associated with this entry. The priority of the queues is in ascending order, starting with queue one being the lowest and queue hpIngressRateLimitgressPortNumQueues being the highest." ::= { hpIngressRateLimitPortBpsEntry 1 } hpIngressRateLimitPortBps OBJECT-TYPE SYNTAX Unsigned32 (0..4200000000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The maximum bits-per-second of traffic that may be transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be transmitted on this port for that ingress queue. The values for each queue must not exceed the bits-per-second capability of the current network link speed." ::= { hpIngressRateLimitPortBpsEntry 2 } -- Conformance Information hpicfRateLimitConformance OBJECT IDENTIFIER ::= { hpicfRateLimitMIB 2 } hpicfRateLimitGroups OBJECT IDENTIFIER ::= { hpicfRateLimitConformance 1 } hpicfRateLimitCompliances OBJECT IDENTIFIER ::= { hpicfRateLimitConformance 2 } -- units of conformance hpICMPRateLimitPortConfigGroup OBJECT-GROUP OBJECTS { hpICMPRateLimitPortState, hpICMPRateLimitPortPrct, hpICMPRateLimitPortAlarmFlag, hpICMPRateLimitNotifyPortIndex } STATUS deprecated DESCRIPTION "A collection of objects providing configuration to ICMP rate limiting on an interface." ::= { hpicfRateLimitGroups 1 } hpICMPRateLimitPortNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { hpICMPRateLimitPortNotification } STATUS current DESCRIPTION "A collection of notifications used to indicate ICMP rate limiting on an interface events." ::= { hpicfRateLimitGroups 2 } hpBWMinIngressPortConfigGroup OBJECT-GROUP OBJECTS { hpBWMinIngressPortNumQueues, hpBWMinIngressPortPrct } STATUS current DESCRIPTION "A collection of objects providing configuration to Guaranteed Minimum ingress bandwidth on an interface." ::= { hpicfRateLimitGroups 3 } hpBWMinEgressPortConfigGroup OBJECT-GROUP OBJECTS { hpBWMinEgressPortNumQueues, hpBWMinEgressPortPrct } STATUS current DESCRIPTION "A collection of objects providing configuration to Guaranteed Minimum egress bandwidth on an interface." ::= { hpicfRateLimitGroups 4 } hpEgressRateLimitPortConfigGroup OBJECT-GROUP OBJECTS { hpEgressRateLimitPortNumQueues, hpEgressRateLimitPortControlMode, hpEgressRateLimitPortSingleControlPrct, hpEgressRateLimitPortSingleControlBps, hpEgressRateLimitPortPrct, hpEgressRateLimitPortBps, hpEgressRateLimitPortSingleControlKbps } STATUS deprecated DESCRIPTION "A collection of objects providing configuration to Egress Rate-Limiting on an interface." ::= { hpicfRateLimitGroups 5 } hpIngressRateLimitPortConfigGroup OBJECT-GROUP OBJECTS { hpIngressRateLimitPortNumQueues, hpIngressRateLimitPortControlMode, hpIngressRateLimitPortSingleControlPrct, hpIngressRateLimitPortSingleControlBps, hpIngressRateLimitPortPrct, hpIngressRateLimitPortBps, hpIngressRateLimitPortSingleControlKbps } STATUS deprecated DESCRIPTION "A collection of objects providing configuration to Ingress Rate-Limiting on an interface." ::= { hpicfRateLimitGroups 6 } hpICMPRateLimitPortConfigGroup2 OBJECT-GROUP OBJECTS { hpICMPRateLimitPortPrct, hpICMPRateLimitPortAlarmFlag, hpICMPRateLimitNotifyPortIndex, hpICMPRateLimitPortKbps, hpICMPRateLimitPortControlMode } STATUS current DESCRIPTION "This replaces the deprecated hpICMPRateLimitPortConfigGroup. A collection of objects providing configuration to ICMP rate limiting on an interface." ::= { hpicfRateLimitGroups 7 } hpEgressRateLimitPortConfigGroup2 OBJECT-GROUP OBJECTS { hpEgressRateLimitPortNumQueues, hpEgressRateLimitPortControlMode, hpEgressRateLimitPortSingleControlPrct, hpEgressRateLimitPortPrct, hpEgressRateLimitPortSingleControlKbps } STATUS current DESCRIPTION "This replaces the deprecated hpEgressRateLimitPortConfigGroup. A collection of objects providing configuration to Egress Rate-Limiting on an interface." ::= { hpicfRateLimitGroups 8 } hpIngressRateLimitPortConfigGroup2 OBJECT-GROUP OBJECTS { hpIngressRateLimitPortNumQueues, hpIngressRateLimitPortControlMode, hpIngressRateLimitPortSingleControlPrct, hpIngressRateLimitPortPrct, hpIngressRateLimitPortSingleControlKbps } STATUS current DESCRIPTION "This replaces the deprecated hpIngressRateLimitPortConfigGroup. A collection of objects providing configuration to Ingress Rate-Limiting on an interface." ::= { hpicfRateLimitGroups 9 } -- compliance statements hpicfRateLimitCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for devices support of HP-ICF-RATE-LIMIT MIB." MODULE -- This Module MANDATORY-GROUPS { hpICMPRateLimitPortConfigGroup, hpICMPRateLimitPortNotifyGroup } ::= { hpicfRateLimitCompliances 1 } hpicfRateLimitCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices support of HP-ICF-RATE-LIMIT MIB." MODULE -- This Module MANDATORY-GROUPS { hpICMPRateLimitPortConfigGroup2, hpICMPRateLimitPortNotifyGroup, hpBWMinIngressPortConfigGroup, hpEgressRateLimitPortConfigGroup2, hpIngressRateLimitPortConfigGroup2 } ::= { hpicfRateLimitCompliances 2 } END