-- Copyright 2003 hP, Inc. -- All rights reserved. -- Copyright message need to be updated HP-PROCURVE-420-PRIVATE-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM RFC1213-MIB mgmt, Counter, IpAddress, enterprises FROM RFC1155-SMI -- Integer32, Counter32 FROM SNMPv2-SMI ; PhysAddress ::= OCTET STRING Guage32 ::= Counter MacAddress ::= OCTET STRING DisplayString ::= OCTET STRING TruthValue ::= INTEGER { false(2), true(1) } -- Before we get the private mib OID from hP, using the accton OID instead hP OBJECT IDENTIFIER ::= { enterprises 11 } wireless OBJECT IDENTIFIER ::= { hP 2 } enterprise OBJECT IDENTIFIER ::= { wireless 3 } accessPoint OBJECT IDENTIFIER ::= { enterprise 7 } proCurve OBJECT IDENTIFIER ::= { accessPoint 11 } hPProCuve420 OBJECT IDENTIFIER ::= { proCurve 37 } -- accton AP OBJECT IDs Groups enterpriseApSys OBJECT IDENTIFIER ::= { hPProCuve420 1 } enterpriseApLineMgnt OBJECT IDENTIFIER ::= { hPProCuve420 2 } enterpriseApPortMgnt OBJECT IDENTIFIER ::= { hPProCuve420 3 } enterpriseApFileTransferMgt OBJECT IDENTIFIER ::= { hPProCuve420 4 } enterpriseApResetMgt OBJECT IDENTIFIER ::= { hPProCuve420 5 } enterpriseApIpMgt OBJECT IDENTIFIER ::= { hPProCuve420 6 } enterpriseAPdot11 OBJECT IDENTIFIER ::= { hPProCuve420 7 } -- **************************************************************************************** -- enterpriseApSys - Standard Mib elements -- **************************************************************************************** swHardwareVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware version of the main board." ::= { enterpriseApSys 1 } swBootRomVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Boot ROM code version of the main board." ::= { enterpriseApSys 2 } swOpCodeVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Operation code version of the main board." ::= { enterpriseApSys 3 } swCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "Country code of the AP. AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA, AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS, CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT, EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA, HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH_KOREA, KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO, NA-NORTH_AMERICA, NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA, SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA, ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY, UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM" ::= { enterpriseApSys 4 } -- **************************************************************************************** -- enterpriseApLine AP Line elements -- **************************************************************************************** lineTable OBJECT-TYPE SYNTAX SEQUENCE OF LineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each RS-232 line in this system" ::= { enterpriseApLineMgnt 1 } lineEntry OBJECT-TYPE SYNTAX LineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one RS232 line of the Access Point." INDEX { lineIndex } ::= { lineTable 1 } LineEntry ::= SEQUENCE { lineIndex Integer32, lineDataBits Integer32, lineParity INTEGER, lineSpeed Integer32, lineStopBits Integer32 } lineIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "This is defined as RS-232 index." ::= { lineEntry 1 } lineDataBits OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This is defined as number of data bits for the RS232 interface." ::= { lineEntry 2 } lineParity OBJECT-TYPE SYNTAX INTEGER { none(99), odd(1), even(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This is defined as parity of the RS232 interface." ::= { lineEntry 3 } lineSpeed OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This is defined as the speed of the RS-232 interface." ::= { lineEntry 4 } lineStopBits OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This is defined as the number of stop bits for the RS-232 interface." ::= { lineEntry 5 } -- **************************************************************************************** -- enterpriseApPortMgnt - Port Mib elements -- **************************************************************************************** portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel)." ::= { enterpriseApPortMgnt 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one switch port of the switch." INDEX { portIndex } ::= { portTable 1 } PortEntry ::= SEQUENCE { portIndex Integer32, portName DisplayString, portType INTEGER, portSpeedDpxCfg INTEGER, portFlowCtrlCfg INTEGER, portCapabilities INTEGER, portAutonegotiation INTEGER, portSpeedDpxStatus INTEGER, portFlowCtrlStatus INTEGER } portIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "This is defined as ifIndex in the IF-MIB." ::= { portEntry 1 } portName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later)." ::= { portEntry 2 } portType OBJECT-TYPE SYNTAX INTEGER { other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the port type." ::= { portEntry 3 } portSpeedDpxCfg OBJECT-TYPE SYNTAX INTEGER { auto(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus." DEFVAL { halfDuplex10 } ::= { portEntry 4 } portFlowCtrlCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4) } ACCESS read-only STATUS mandatory DESCRIPTION "(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus." DEFVAL { enabled } ::= { portEntry 5 } portCapabilities OBJECT-TYPE SYNTAX INTEGER { portCap10half(99), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15) } ACCESS read-only STATUS mandatory DESCRIPTION "Port capabilities." ::= { portEntry 6 } portAutonegotiation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether autonegotiation is enabled." ::= { portEntry 7 } portSpeedDpxStatus OBJECT-TYPE SYNTAX INTEGER { error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1)." ::= { portEntry 8 } portFlowCtrlStatus OBJECT-TYPE SYNTAX INTEGER { error(1), backPressure(2), dot3xFlowControl(3), none(4) } ACCESS read-only STATUS mandatory DESCRIPTION "(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1)." ::= { portEntry 9 } -- **************************************************************************************** -- enterpriseApTftpMgt - File Transfer Mib elements -- **************************************************************************************** transferStart OBJECT-TYPE SYNTAX INTEGER { go(1), nogo(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to go(1) to start a transfer." ::= { enterpriseApFileTransferMgt 1 } transferType OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of file to transfer." ::= { enterpriseApFileTransferMgt 2 } fileType OBJECT-TYPE SYNTAX INTEGER { opcode(1), config(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of file to transfer." ::= { enterpriseApFileTransferMgt 3 } srcFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified." ::= { enterpriseApFileTransferMgt 4 } destFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified." ::= { enterpriseApFileTransferMgt 5 } fileServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified." ::= { enterpriseApFileTransferMgt 6 } userName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "The username specified for an FTP Transfer." ::= { enterpriseApFileTransferMgt 7 } password OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "The password specified for an FTP Transfer." ::= { enterpriseApFileTransferMgt 8 } -- **************************************************************************************** -- enterpriseApResetMgt - Reset Mib elements -- **************************************************************************************** restartOpCodeFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of op-code file for start-up." ::= { enterpriseApResetMgt 1 } restartControl OBJECT-TYPE SYNTAX INTEGER { running(1), warmBoot(2), coldBoot(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1)." ::= { enterpriseApResetMgt 2 } -- **************************************************************************************** -- enterpriseApIpMgnt - Ip Mib elements -- **************************************************************************************** netConfigIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)." ::= { enterpriseApIpMgt 1 } netConfigSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)." ::= { enterpriseApIpMgt 2 } netDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0." ::= { enterpriseApIpMgt 3 } ipHttpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether HTTP is enabled." ::= { enterpriseApIpMgt 4 } ipHttpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number for HTTP." ::= { enterpriseApIpMgt 5 } -- **************************************************************************************** -- enterpriseAPdot11 - 802.11 MIB elements -- **************************************************************************************** hpdot11StationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11StationConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each radio of the AP." ::= { enterpriseAPdot11 1 } hpdot11StationConfigEntry OBJECT-TYPE SYNTAX Hpdot11StationConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11portIndex } ::= { hpdot11StationConfigTable 1 } Hpdot11StationConfigEntry ::= SEQUENCE { hpdot11portIndex Integer32, hpdot11DesiredSSID OCTET STRING, hpdot11BeaconPeriod INTEGER, hpdot11DTIMPeriod INTEGER, hpdot11OperationalRateSet INTEGER, hpdot11AuthenticationAlgorithm INTEGER } hpdot11portIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Radio index of the AP." ::= { hpdot11StationConfigEntry 1 } hpdot11DesiredSSID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute reflects the Service Set ID used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process." ::= { hpdot11StationConfigEntry 2 } hpdot11BeaconPeriod OBJECT-TYPE SYNTAX INTEGER (20..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall specify the number of ms that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames." ::= { hpdot11StationConfigEntry 3 } hpdot11DTIMPeriod OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames." ::= { hpdot11StationConfigEntry 4 } hpdot11OperationalRateSet OBJECT-TYPE SYNTAX INTEGER (1..108) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3." ::= { hpdot11StationConfigEntry 5 } hpdot11AuthenticationAlgorithm OBJECT-TYPE SYNTAX INTEGER { openSystem (1), sharedKey (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall be a set of all the authentication algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: Open System Value = 2: Shared Key" ::= { hpdot11StationConfigEntry 6 } -- ********************************************************************** -- * End of dot11StationConfig TABLE -- ********************************************************************** -- ********************************************************************** -- * hpdot11PrivacyEntry TABLE -- ********************************************************************** hpdot11PrivacyTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11PrivacyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each radio of the AP." ::= { enterpriseAPdot11 2 } hpdot11PrivacyEntry OBJECT-TYPE SYNTAX Hpdot11PrivacyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11PrivacyportIndex } ::= { hpdot11PrivacyTable 1 } Hpdot11PrivacyEntry ::= SEQUENCE { hpdot11PrivacyportIndex Integer32, hpdot11PrivacyInvoked INTEGER, hpdot11WEPDefaultKeyID INTEGER, hpdot11WEPKeyMappingLength INTEGER } hpdot11PrivacyportIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Radio index of the AP." ::= { hpdot11PrivacyEntry 1 } hpdot11PrivacyInvoked OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this attribute is true, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be false." ::= { hpdot11PrivacyEntry 2 } hpdot11WEPDefaultKeyID OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall indicate the use of the first, second, or third element of the WEPDefaultKeys array when set to values of zero, one, or two(the fourth are reserved for dynamic key). The default value of this attribute shall be 0." REFERENCE "ISO/IEC 8802-11:1999, 8.3.2" ::= { hpdot11PrivacyEntry 3 } hpdot11WEPKeyMappingLength OBJECT-TYPE SYNTAX INTEGER (10..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of tuples that dot11WEPKeyMappings can hold." REFERENCE "ISO/IEC 8802-11:1999, 8.3.2" ::= { hpdot11PrivacyEntry 4 } -- ********************************************************************** -- * End of dot11Privacy TABLE -- ********************************************************************** -- MAC Attributes hpdot11mac OBJECT IDENTIFIER ::= { enterpriseAPdot11 3 } -- ********************************************************************** -- * dot11OperationTable TABLE -- ********************************************************************** hpdot11OperationTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11OperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each radio of the AP." ::= { hpdot11mac 1 } hpdot11OperationEntry OBJECT-TYPE SYNTAX Hpdot11OperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11OperationIndex } ::= { hpdot11OperationTable 1 } Hpdot11OperationEntry ::= SEQUENCE { hpdot11OperationIndex Integer32, hpdot11RTSThreshold INTEGER, hpdot11FragmentationThreshold INTEGER } hpdot11OperationIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Radio index of the AP." ::= { hpdot11OperationEntry 1 } hpdot11RTSThreshold OBJECT-TYPE SYNTAX INTEGER (0..2347) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347." ::= { hpdot11OperationEntry 2 } hpdot11FragmentationThreshold OBJECT-TYPE SYNTAX INTEGER (256..2346) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute shall specify the mandatory maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256." ::= { hpdot11OperationEntry 3 } -- ********************************************************************** -- * End of dot11OperationTable TABLE -- ********************************************************************** -- PHY Attributes hpdot11phy OBJECT IDENTIFIER ::= { enterpriseAPdot11 4 } -- ********************************************************************** -- * dot11PhyOperationEntry TABLE -- ********************************************************************** hpdot11PhyOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11PhyOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each radio of the AP." ::= { hpdot11phy 1 } hpdot11PhyOperationEntry OBJECT-TYPE SYNTAX Hpdot11PhyOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11Index } ::= { hpdot11PhyOperationTable 1 } Hpdot11PhyOperationEntry ::= SEQUENCE { hpdot11Index Integer32, hpdot11CurrentChannel INTEGER, hpdot11TurboModeEnabled INTEGER, hpdot11PreambleLength INTEGER } hpdot11Index OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Radio index of the AP." ::= { hpdot11PhyOperationEntry 1 } hpdot11CurrentChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The current operating frequency channel of the network" ::= { hpdot11PhyOperationEntry 2 } hpdot11TurboModeEnabled OBJECT-TYPE SYNTAX INTEGER { none(99), on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, when true, shall indicate that the propietory turbo mode option is enabled. The default value of this attribute shall be false." ::= { hpdot11PhyOperationEntry 3 } hpdot11PreambleLength OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute determines whether or not a short or a long preamble is used to delineate 802.11 frames." ::= { hpdot11PhyOperationEntry 4 } -- ********************************************************************** -- * End of dot11PhyOperationEntry TABLE -- ********************************************************************** -- ********************************************************************** -- * dot11AuthenticationEntry TABLE -- ********************************************************************** hpdot11AuthenticationEntry OBJECT IDENTIFIER ::= { enterpriseAPdot11 5 } hpdot118021xSupport OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, when true(1), indicates that the Enterprise Access Point supports the 802.1x authentication algorithm." ::= { hpdot11AuthenticationEntry 1 } hpdot118021xRequired OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, when true(1), indicates that the Enterprise Access Point requires successful 802.1x authentication for any clients accessing the network." ::= { hpdot11AuthenticationEntry 2 } -- ********************************************************************** -- * End of dot11Authentication TABLE -- ********************************************************************** -- ********************************************************************** -- * dot11AuthenticationServer TABLE -- ********************************************************************** hpdot11AuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11AuthenticationServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of descriptive and status information about configuration of each authentication server." ::= { enterpriseAPdot11 6 } hpdot11AuthenticationServerEntry OBJECT-TYPE SYNTAX Hpdot11AuthenticationServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11serverIndex } ::= { hpdot11AuthenticationServerTable 1 } Hpdot11AuthenticationServerEntry ::= SEQUENCE { hpdot11serverIndex Integer32, hpdot11AuthenticationServer IpAddress, hpdot11AuthenticationPort INTEGER, hpdot11AuthenticationKey DisplayString, hpdot11AuthenticationRetransmit INTEGER, hpdot11AuthenticationTimeout INTEGER } hpdot11serverIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Radio index of the AP." ::= { hpdot11AuthenticationServerEntry 1 } hpdot11AuthenticationServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the IP address of the authentication server." ::= { hpdot11AuthenticationServerEntry 2 } hpdot11AuthenticationPort OBJECT-TYPE SYNTAX INTEGER (1024..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the UDP Port used by the primary authentication server." ::= { hpdot11AuthenticationServerEntry 3 } hpdot11AuthenticationKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the shared key used by the authentication server." ::= { hpdot11AuthenticationServerEntry 4 } hpdot11AuthenticationRetransmit OBJECT-TYPE SYNTAX INTEGER (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the retransmit timer length used by the authentication server." ::= { hpdot11AuthenticationServerEntry 5 } hpdot11AuthenticationTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the Timeout value(sec) used by the authentication server." ::= { hpdot11AuthenticationServerEntry 6 } -- ********************************************************************** -- * End of dot11AuthenticationServer TABLE -- ********************************************************************** -- ********************************************************************** -- * dot11FilteringTable TABLE -- ********************************************************************** hpdot11FilterTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of status information about each configured MAC Address Filtering Entry." ::= { enterpriseAPdot11 7 } hpdot11FilterEntry OBJECT-TYPE SYNTAX Hpdot11FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about configuration in one radio of the AP." INDEX { hpdot11FilterIndex } ::= { hpdot11FilterTable 1 } Hpdot11FilterEntry ::= SEQUENCE { hpdot11FilterIndex Integer32, hpdot11FilterAddress PhysAddress, hpdot11FilterStatus INTEGER } hpdot11FilterIndex OBJECT-TYPE SYNTAX Integer32 ACCESS not-accessible STATUS mandatory DESCRIPTION "Filter index." ::= { hpdot11FilterEntry 1 } hpdot11FilterAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the MAC address of the filter entry." ::= { hpdot11FilterEntry 2 } hpdot11FilterStatus OBJECT-TYPE SYNTAX INTEGER { allowed(30), denied(31) } ACCESS read-write STATUS mandatory DESCRIPTION "This values indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client." ::= { hpdot11FilterEntry 3 } hpdot11smt OBJECT IDENTIFIER ::= { enterpriseAPdot11 8 } -- -- ********************************************************************** -- * WEP Default Keys Table 11g -- ********************************************************************** hpdot11WEPDefaultKeys11g OBJECT IDENTIFIER ::= { hpdot11smt 1 } hpdot11WEPDefaultKeys11gTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpdot11WEPDefaultKeys11gEntry MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value of each WEP default key shall be null." REFERENCE "IEEE Std 802.11-1997, 8.3.2" ::= { hpdot11WEPDefaultKeys11g 1 } hpdot11WEPDefaultKeys11gEntry OBJECT-TYPE SYNTAX Hpdot11WEPDefaultKeys11gEntry MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "An Entry (conceptual row) in the WEP Default Keys Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { dot11WEPDefaultKey11gLength } ::= { hpdot11WEPDefaultKeys11gTable 1 } Hpdot11WEPDefaultKeys11gEntry ::= SEQUENCE { hpdot11WEPDefaultKey11gLength INTEGER, hpdot11WEPDefaultKey11gIndex INTEGER, hpdot11WEPDefaultKey11gValue OCTET STRING } hpdot11WEPDefaultKey11gLength OBJECT-TYPE SYNTAX INTEGER { sixtyFour(64), oneHundredTwentyEight(128), oneHundredFiftyTwo(152) } MAX-ACCESS read-write STATUS mandatory DESCRIPTION "A 40(64)-bits [5 octets WEP], 104(128)-bits [13 octets] or 128(152)-bits [16 octets]" DEFVAL { oneHundredTwentyEight } ::= { hpdot11WEPDefaultKeys11gEntry 1 } hpdot11WEPDefaultKey11gIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS not-accessible STATUS mandatory DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1" ::= { hpdot11WEPDefaultKeys11gEntry 2 } hpdot11WEPDefaultKey11gValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS mandatory DESCRIPTION "A 40(64)-bits [5 octets WEP] or 104(128)-bits [13 octets] default secret key value." ::= { hpdot11WEPDefaultKeys11gEntry 3 } END