HP-SN-BGP4-GROUP-MIB DEFINITIONS ::= BEGIN -- Foundry snBgp4 Group MIB Release 1.0.0 -- Revision 0 09/09/98 -- Copyright 1996-97 Foundry Networks, Inc. -- All rights reserved. -- This Foundry Networks SNMP Management Information Base Specification -- (Specification) embodies Foundry Networks' confidential and -- proprietary intellectual property. Foundry Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Foundry Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- SECTION 1: Top Level Definitions IMPORTS Counter, Gauge, IpAddress FROM RFC1155-SMI -- mib-2 -- FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 snBgp4 FROM HP-SN-ROOT-MIB; -- Groups snBgp4Gen OBJECT IDENTIFIER ::= { snBgp4 1 } snBgp4AddrFilter OBJECT IDENTIFIER ::= { snBgp4 2 } snBgp4AggregateAddr OBJECT IDENTIFIER ::= { snBgp4 3 } snBgp4AsPathFilter OBJECT IDENTIFIER ::= { snBgp4 4 } snBgp4CommunityFilter OBJECT IDENTIFIER ::= { snBgp4 5 } snBgp4NeighGenCfg OBJECT IDENTIFIER ::= { snBgp4 6 } snBgp4NeighDistGroup OBJECT IDENTIFIER ::= { snBgp4 7 } snBgp4NeighFilterGroup OBJECT IDENTIFIER ::= { snBgp4 8 } snBgp4NeighRouteMap OBJECT IDENTIFIER ::= { snBgp4 9 } snBgp4Network OBJECT IDENTIFIER ::= { snBgp4 10 } snBgp4Redis OBJECT IDENTIFIER ::= { snBgp4 11 } snBgp4RouteMapFilter OBJECT IDENTIFIER ::= { snBgp4 12 } snBgp4RouteMapMatch OBJECT IDENTIFIER ::= { snBgp4 13 } snBgp4RouteMapSet OBJECT IDENTIFIER ::= { snBgp4 14 } snBgp4NeighOperStatus OBJECT IDENTIFIER ::= { snBgp4 15 } snBgp4RouteOperStatus OBJECT IDENTIFIER ::= { snBgp4 16 } snBgp4NeighborSummary OBJECT IDENTIFIER ::= { snBgp4 17 } snBgp4Attribute OBJECT IDENTIFIER ::= { snBgp4 18 } snBgp4ClearNeighborCmd OBJECT IDENTIFIER ::= { snBgp4 19 } snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 } -- BGP4 General Variables -- These parameters apply globally to the Router's -- BGP4 Process. snBgp4GenAlwaysCompareMed OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS." ::= { snBgp4Gen 1 } snBgp4GenAutoSummary OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes." ::= { snBgp4Gen 2 } snBgp4GenDefaultLocalPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To set the default local preference attribute." ::= { snBgp4Gen 3 } snBgp4GenDefaultInfoOriginate OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the default Information Originate." ::= { snBgp4Gen 4 } snBgp4GenFastExternalFallover OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down." ::= { snBgp4Gen 5 } snBgp4GenNextBootNeighbors OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors." ::= { snBgp4Gen 6 } snBgp4GenNextBootRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes." ::= { snBgp4Gen 7 } snBgp4GenSynchronization OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the synchronization between BGP and your IGP." ::= { snBgp4Gen 8 } snBgp4GenKeepAliveTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Keep alive timer." ::= { snBgp4Gen 9 } snBgp4GenHoldTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Hold time timer." ::= { snBgp4Gen 10 } snBgp4GenRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "BGP Router Id." ::= { snBgp4Gen 11 } snBgp4GenTableMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4Gen 12 } snBgp4GenAdminStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router." ::= { snBgp4Gen 13 } snBgp4GenDefaultMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To set default metric values for the BGP4 protocol." ::= { snBgp4Gen 14 } snBgp4GenMaxNeighbors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of neighbors can be configured in a BGP Peer Group." ::= { snBgp4Gen 15 } snBgp4GenMinNeighbors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum number of neighbors can be configured in a BGP Peer Group." ::= { snBgp4Gen 16 } snBgp4GenMaxRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of Routes." ::= { snBgp4Gen 17 } snBgp4GenMinRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum configured number of Routes." ::= { snBgp4Gen 18 } snBgp4GenMaxAddrFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 address filters." ::= { snBgp4Gen 19 } snBgp4GenMaxAggregateAddresses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 aggregate addresses." ::= { snBgp4Gen 20 } snBgp4GenMaxAsPathFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 AS-PATH filters." ::= { snBgp4Gen 21 } snBgp4GenMaxCommunityFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 Community filters." ::= { snBgp4Gen 22 } snBgp4GenMaxNetworks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 Networks." ::= { snBgp4Gen 23 } snBgp4GenMaxRouteMapFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum configured number of BGP4 Route-map Filters." ::= { snBgp4Gen 24 } snBgp4GenNeighPrefixMinValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum configured value of BGP4 Neighbor Prefix." ::= { snBgp4Gen 25 } snBgp4GenOperNeighbors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current operational max number of neighbors configured for a BGP Group." ::= { snBgp4Gen 26 } snBgp4GenOperRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current operational number of Routes." ::= { snBgp4Gen 27 } snBgp4GenLocalAs OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 local autonomous system number." ::= { snBgp4Gen 28 } snBgp4GenRoutesInstalled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bgp4 installed routes." ::= { snBgp4Gen 29 } snBgp4GenAsPathInstalled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bgp4 installed autonomous system path." ::= { snBgp4Gen 30 } snBgp4ExternalDistance OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Administrative distance for BGP external routes." DEFVAL { 20 } ::= { snBgp4Gen 31 } snBgp4InternalDistance OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Administrative distance for BGP internal routes." DEFVAL { 200 } ::= { snBgp4Gen 32 } snBgp4LocalDistance OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Administrative distance for BGP local routes." DEFVAL { 200 } ::= { snBgp4Gen 33 } snBgp4OperNumOfAttributes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The operational number of attribute entries." ::= { snBgp4Gen 34 } snBgp4NextBootMaxAttributes OBJECT-TYPE SYNTAX INTEGER (200..30000) ACCESS read-write STATUS mandatory DESCRIPTION "The next boot maximum attribute entries. 10000 means reset to default." DEFVAL { 10000 } ::= { snBgp4Gen 35 } snBgp4ClusterId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default." ::= { snBgp4Gen 36 } snBgp4ClientToClientReflection OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the client to client reflection in BGP4." ::= { snBgp4Gen 37 } snBgp4GenTotalNeighbors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current total number of neighbors running in a BGP Group." ::= { snBgp4Gen 38 } snBgp4GenMaxPaths OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum configured number of Paths." ::= { snBgp4Gen 39 } snBgp4GenConfedId OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Confederation Id." ::= { snBgp4Gen 40 } snBgp4GenConfedPeers OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..100)) ACCESS read-write STATUS mandatory DESCRIPTION "An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs." ::= { snBgp4Gen 41 } snBgp4GenDampening OBJECT-TYPE SYNTAX INTEGER { none (0), parameters (1), routeMap (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable." ::= { snBgp4Gen 42 } snBgp4GenDampenHalfLife OBJECT-TYPE SYNTAX INTEGER (1..45) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Half Life." ::= { snBgp4Gen 43 } snBgp4GenDampenReuse OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Reuse." ::= { snBgp4Gen 44 } snBgp4GenDampenSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Suppress." ::= { snBgp4Gen 45 } snBgp4GenDampenMaxSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Max Suppress Time." ::= { snBgp4Gen 46 } snBgp4GenDampenMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the route-map name for dampening, each character of the name is represented by one octet." ::= { snBgp4Gen 47 } --- Bgp4 Address Filter table snBgp4AddrFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4AddrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Address Filter table." ::= { snBgp4AddrFilter 1 } snBgp4AddrFilterEntry OBJECT-TYPE SYNTAX SnBgp4AddrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Address Filter table." INDEX { snBgp4AddrFilterIndex } ::= { snBgp4AddrFilterTable 1 } SnBgp4AddrFilterEntry ::= SEQUENCE { snBgp4AddrFilterIndex INTEGER, snBgp4AddrFilterAction INTEGER, snBgp4AddrFilterSourceIp IpAddress, snBgp4AddrFilterSourceMask IpAddress, snBgp4AddrFilterDestIp IpAddress, snBgp4AddrFilterDestMask IpAddress, snBgp4AddrFilterRowStatus INTEGER } snBgp4AddrFilterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The table index for a filter entry." ::= { snBgp4AddrFilterEntry 1 } snBgp4AddrFilterAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Action to take if the bgp address match with this filter." ::= { snBgp4AddrFilterEntry 2 } snBgp4AddrFilterSourceIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source IP address." ::= { snBgp4AddrFilterEntry 3 } snBgp4AddrFilterSourceMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source IP subnet mask." ::= { snBgp4AddrFilterEntry 4 } snBgp4AddrFilterDestIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP address." ::= { snBgp4AddrFilterEntry 5 } snBgp4AddrFilterDestMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP subnet mask." ::= { snBgp4AddrFilterEntry 6 } snBgp4AddrFilterRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4AddrFilterEntry 7 } -- Bgp4 Aggregate Address table snBgp4AggregateAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4AggregateAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Aggregate Address table." ::= { snBgp4AggregateAddr 1 } snBgp4AggregateAddrEntry OBJECT-TYPE SYNTAX SnBgp4AggregateAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Aggregate Address table." INDEX { snBgp4AggregateAddrIp, snBgp4AggregateAddrMask, snBgp4AggregateAddrOption } ::= { snBgp4AggregateAddrTable 1 } SnBgp4AggregateAddrEntry ::= SEQUENCE { snBgp4AggregateAddrIp IpAddress, snBgp4AggregateAddrMask IpAddress, snBgp4AggregateAddrOption INTEGER, snBgp4AggregateAddrMap OCTET STRING, snBgp4AggregateAddrRowStatus INTEGER } snBgp4AggregateAddrIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Aggregate Address IP address." ::= { snBgp4AggregateAddrEntry 1 } snBgp4AggregateAddrMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Aggregate Address IP subnet mask." ::= { snBgp4AggregateAddrEntry 2 } snBgp4AggregateAddrOption OBJECT-TYPE SYNTAX INTEGER { address(1), asSet(2), summaryOnly(3), suppressMap(4), advertiseMap(5), attributeMap(6) } ACCESS read-only STATUS mandatory DESCRIPTION "address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table." ::= { snBgp4AggregateAddrEntry 3 } snBgp4AggregateAddrMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet." ::= { snBgp4AggregateAddrEntry 4 } snBgp4AggregateAddrRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4AggregateAddrEntry 5 } -- Bgp4 AS-Path Filter table snBgp4AsPathFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4AsPathFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 AS-Path Filter table." ::= { snBgp4AsPathFilter 1 } snBgp4AsPathFilterEntry OBJECT-TYPE SYNTAX SnBgp4AsPathFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 As-path Filter table." INDEX { snBgp4AsPathFilterIndex } ::= { snBgp4AsPathFilterTable 1 } SnBgp4AsPathFilterEntry ::= SEQUENCE { snBgp4AsPathFilterIndex INTEGER, snBgp4AsPathFilterAction INTEGER, snBgp4AsPathFilterRegExpression OCTET STRING, snBgp4AsPathFilterRowStatus INTEGER } snBgp4AsPathFilterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The table index for a filter entry." ::= { snBgp4AsPathFilterEntry 1 } snBgp4AsPathFilterAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Action to take if the bgp address match with this filter." ::= { snBgp4AsPathFilterEntry 2 } snBgp4AsPathFilterRegExpression OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet." ::= { snBgp4AsPathFilterEntry 3 } snBgp4AsPathFilterRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4AsPathFilterEntry 4 } -- Bgp4 Community Filter table snBgp4CommunityFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4CommunityFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Community Filter table." ::= { snBgp4CommunityFilter 1 } snBgp4CommunityFilterEntry OBJECT-TYPE SYNTAX SnBgp4CommunityFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Community Filter table." INDEX { snBgp4CommunityFilterIndex } ::= { snBgp4CommunityFilterTable 1 } SnBgp4CommunityFilterEntry ::= SEQUENCE { snBgp4CommunityFilterIndex INTEGER, snBgp4CommunityFilterAction INTEGER, snBgp4CommunityFilterCommNum OCTET STRING, snBgp4CommunityFilterInternet INTEGER, snBgp4CommunityFilterNoAdvertise INTEGER, snBgp4CommunityFilterNoExport INTEGER, snBgp4CommunityFilterRowStatus INTEGER, snBgp4CommunityFilterLocalAs INTEGER } snBgp4CommunityFilterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The table index for a filter entry." ::= { snBgp4CommunityFilterEntry 1 } snBgp4CommunityFilterAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Action to take if the bgp address match with this filter." ::= { snBgp4CommunityFilterEntry 2 } snBgp4CommunityFilterCommNum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs." ::= { snBgp4CommunityFilterEntry 3 } snBgp4CommunityFilterInternet OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Disabled/Enabled the Internet Community." ::= { snBgp4CommunityFilterEntry 4 } snBgp4CommunityFilterNoAdvertise OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Do not advertise this route to any peer (internal or external)." ::= { snBgp4CommunityFilterEntry 5 } snBgp4CommunityFilterNoExport OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Do not advertise this route to an EBGP peer." ::= { snBgp4CommunityFilterEntry 6 } snBgp4CommunityFilterRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4CommunityFilterEntry 7 } snBgp4CommunityFilterLocalAs OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system." ::= { snBgp4CommunityFilterEntry 8 } -- Bgp4 Neighbor General Configuration Table snBgp4NeighGenCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighGenCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor General Configuration table." ::= { snBgp4NeighGenCfg 1 } snBgp4NeighGenCfgEntry OBJECT-TYPE SYNTAX SnBgp4NeighGenCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Community Filter table." INDEX { snBgp4NeighGenCfgNeighIp } ::= { snBgp4NeighGenCfgTable 1 } SnBgp4NeighGenCfgEntry ::= SEQUENCE { snBgp4NeighGenCfgNeighIp IpAddress, snBgp4NeighGenCfgAdvertlevel INTEGER, snBgp4NeighGenCfgDefOriginate INTEGER, snBgp4NeighGenCfgEbgpMultihop INTEGER, snBgp4NeighGenCfgMaxPrefix INTEGER, snBgp4NeighGenCfgNextHopSelf INTEGER, snBgp4NeighGenCfgRemoteAs INTEGER, snBgp4NeighGenCfgSendComm INTEGER, snBgp4NeighGenCfgWeight INTEGER, snBgp4NeighGenCfgWeightFilterList OCTET STRING, snBgp4NeighGenCfgRowStatus INTEGER, snBgp4NeighGenCfgUpdateSrcLpbIntf INTEGER, snBgp4NeighGenCfgRouteRefClient INTEGER, snBgp4NeighGenCfgRemovePrivateAs INTEGER, snBgp4NeighGenCfgEbgpMultihopTtl INTEGER, snBgp4NeighGenCfgShutdown INTEGER, snBgp4NeighGenCfgKeepAliveTime INTEGER, snBgp4NeighGenCfgHoldTime INTEGER, snBgp4NeighGenCfgDefOrigMap OCTET STRING, snBgp4NeighGenCfgDesc OCTET STRING, snBgp4NeighGenCfgPass OCTET STRING } snBgp4NeighGenCfgNeighIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighGenCfgEntry 1 } snBgp4NeighGenCfgAdvertlevel OBJECT-TYPE SYNTAX INTEGER (0..600) ACCESS read-write STATUS mandatory DESCRIPTION "To set the minimum interval between the sending of BGP routing updates." ::= { snBgp4NeighGenCfgEntry 2 } snBgp4NeighGenCfgDefOriginate OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the default originate for this neighbor." ::= { snBgp4NeighGenCfgEntry 3 } snBgp4NeighGenCfgEbgpMultihop OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the EBGP Muitihop for this neighbor." ::= { snBgp4NeighGenCfgEntry 4 } snBgp4NeighGenCfgMaxPrefix OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes." ::= { snBgp4NeighGenCfgEntry 5 } snBgp4NeighGenCfgNextHopSelf OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the next-hop processing of BGP updates on the router." ::= { snBgp4NeighGenCfgEntry 6 } snBgp4NeighGenCfgRemoteAs OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To specify a neighbor with an autonomous system number(AS)." ::= { snBgp4NeighGenCfgEntry 7 } snBgp4NeighGenCfgSendComm OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To specify that a COMMUNITES attribute should be sent to a BGP neighbor." ::= { snBgp4NeighGenCfgEntry 8 } snBgp4NeighGenCfgWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To assign a weight to a neighbor connection." ::= { snBgp4NeighGenCfgEntry 9 } snBgp4NeighGenCfgWeightFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighGenCfgEntry 10 } snBgp4NeighGenCfgRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5), applyDefault(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NeighGenCfgEntry 11 } snBgp4NeighGenCfgUpdateSrcLpbIntf OBJECT-TYPE SYNTAX INTEGER (0..8) ACCESS read-write STATUS mandatory DESCRIPTION "To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address." ::= { snBgp4NeighGenCfgEntry 12 } snBgp4NeighGenCfgRouteRefClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector." ::= { snBgp4NeighGenCfgEntry 13 } snBgp4NeighGenCfgRemovePrivateAs OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable filtering private AS number." ::= { snBgp4NeighGenCfgEntry 14 } snBgp4NeighGenCfgEbgpMultihopTtl OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The EBGP Muitihop TTL for this neighbor." ::= { snBgp4NeighGenCfgEntry 15 } snBgp4NeighGenCfgShutdown OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable BGP4 Nbr Shutdown." ::= { snBgp4NeighGenCfgEntry 16 } snBgp4NeighGenCfgKeepAliveTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Keep alive timer." ::= { snBgp4NeighGenCfgEntry 17 } snBgp4NeighGenCfgHoldTime OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Hold time timer." ::= { snBgp4NeighGenCfgEntry 18 } snBgp4NeighGenCfgDefOrigMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4NeighGenCfgEntry 19 } snBgp4NeighGenCfgDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the neighbor description." ::= { snBgp4NeighGenCfgEntry 20 } snBgp4NeighGenCfgPass OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..80)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the neighbor Md5 password." ::= { snBgp4NeighGenCfgEntry 21 } -- Bgp4 Neighbor Distribute Group Table snBgp4NeighDistGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighDistGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor Distribute Group table." ::= { snBgp4NeighDistGroup 1 } snBgp4NeighDistGroupEntry OBJECT-TYPE SYNTAX SnBgp4NeighDistGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Distribute Group table." INDEX { snBgp4NeighDistGroupNeighIp, snBgp4NeighDistGroupDir } ::= { snBgp4NeighDistGroupTable 1 } SnBgp4NeighDistGroupEntry ::= SEQUENCE { snBgp4NeighDistGroupNeighIp IpAddress, snBgp4NeighDistGroupDir INTEGER, snBgp4NeighDistGroupAccessList OCTET STRING, snBgp4NeighDistGroupRowStatus INTEGER, snBgp4NeighDistGroupInFilterList OCTET STRING, snBgp4NeighDistGroupOutFilterList OCTET STRING, snBgp4NeighDistGroupInIpAccessList OCTET STRING, snBgp4NeighDistGroupOutIpAccessList OCTET STRING, snBgp4NeighDistGroupInPrefixList OCTET STRING, snBgp4NeighDistGroupOutPrefixList OCTET STRING } snBgp4NeighDistGroupNeighIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighDistGroupEntry 1 } snBgp4NeighDistGroupDir OBJECT-TYPE SYNTAX INTEGER { out(0), in(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighDistGroupEntry 2 } snBgp4NeighDistGroupAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 3 } snBgp4NeighDistGroupRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NeighDistGroupEntry 4 } snBgp4NeighDistGroupInFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 5 } snBgp4NeighDistGroupOutFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 6 } snBgp4NeighDistGroupInIpAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 7 } snBgp4NeighDistGroupOutIpAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighDistGroupEntry 8 } snBgp4NeighDistGroupInPrefixList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A Prefix name list. " ::= { snBgp4NeighDistGroupEntry 9 } snBgp4NeighDistGroupOutPrefixList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A Prefix name list. " ::= { snBgp4NeighDistGroupEntry 10 } -- Bgp4 Neighbor Filter Group Table snBgp4NeighFilterGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighFilterGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor Filter Group table." ::= { snBgp4NeighFilterGroup 1 } snBgp4NeighFilterGroupEntry OBJECT-TYPE SYNTAX SnBgp4NeighFilterGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Neighbor Filter Group table." INDEX { snBgp4NeighFilterGroupNeighIp, snBgp4NeighFilterGroupDir } ::= { snBgp4NeighFilterGroupTable 1 } SnBgp4NeighFilterGroupEntry ::= SEQUENCE { snBgp4NeighFilterGroupNeighIp IpAddress, snBgp4NeighFilterGroupDir INTEGER, snBgp4NeighFilterGroupAccessList OCTET STRING, snBgp4NeighFilterGroupRowStatus INTEGER, snBgp4NeighFilterGroupInFilterList OCTET STRING, snBgp4NeighFilterGroupOutFilterList OCTET STRING, snBgp4NeighFilterGroupInAsPathAccessList OCTET STRING, snBgp4NeighFilterGroupOutAsPathAccessList OCTET STRING, snBgp4NeighFilterGroupWeight INTEGER, snBgp4NeighFilterGroupWeightAccessList OCTET STRING } snBgp4NeighFilterGroupNeighIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighFilterGroupEntry 1 } snBgp4NeighFilterGroupDir OBJECT-TYPE SYNTAX INTEGER { out(0), in(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighFilterGroupEntry 2 } snBgp4NeighFilterGroupAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 3 } snBgp4NeighFilterGroupRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NeighFilterGroupEntry 4 } snBgp4NeighFilterGroupInFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 5 } snBgp4NeighFilterGroupOutFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 6 } snBgp4NeighFilterGroupInAsPathAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 7 } snBgp4NeighFilterGroupOutAsPathAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 8 } snBgp4NeighFilterGroupWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To assign a weight to a neighbor filter." ::= { snBgp4NeighFilterGroupEntry 9 } snBgp4NeighFilterGroupWeightAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs." ::= { snBgp4NeighFilterGroupEntry 10 } -- Bgp4 Neighbor Route Map Table snBgp4NeighRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighRouteMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor Route Map table." ::= { snBgp4NeighRouteMap 1 } snBgp4NeighRouteMapEntry OBJECT-TYPE SYNTAX SnBgp4NeighRouteMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Route Map table." INDEX { snBgp4NeighRouteMapNeighIp, snBgp4NeighRouteMapDir } ::= { snBgp4NeighRouteMapTable 1 } SnBgp4NeighRouteMapEntry ::= SEQUENCE { snBgp4NeighRouteMapNeighIp IpAddress, snBgp4NeighRouteMapDir INTEGER, snBgp4NeighRouteMapMapName OCTET STRING, snBgp4NeighRouteMapRowStatus INTEGER } snBgp4NeighRouteMapNeighIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighRouteMapEntry 1 } snBgp4NeighRouteMapDir OBJECT-TYPE SYNTAX INTEGER { out(0), in(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighRouteMapEntry 2 } snBgp4NeighRouteMapMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the route-map name, Each character of the name is represented by one octet." ::= { snBgp4NeighRouteMapEntry 3 } snBgp4NeighRouteMapRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NeighRouteMapEntry 4 } -- Bgp4 Network Table snBgp4NetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Network Weight table." ::= { snBgp4Network 1 } snBgp4NetworkEntry OBJECT-TYPE SYNTAX SnBgp4NetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Network Weight table." INDEX { snBgp4NetworkIp, snBgp4NetworkSubnetMask } ::= { snBgp4NetworkTable 1 } SnBgp4NetworkEntry ::= SEQUENCE { snBgp4NetworkIp IpAddress, snBgp4NetworkSubnetMask IpAddress, snBgp4NetworkWeight INTEGER, snBgp4NetworkBackdoor INTEGER, snBgp4NetworkRowStatus INTEGER } snBgp4NetworkIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a network entry." ::= { snBgp4NetworkEntry 1 } snBgp4NetworkSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The subnet mask for a network entry." ::= { snBgp4NetworkEntry 2 } snBgp4NetworkWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To assign a weight to a neighbor connection." ::= { snBgp4NetworkEntry 3 } snBgp4NetworkBackdoor OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the backdoor for this network." ::= { snBgp4NetworkEntry 4 } snBgp4NetworkRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NetworkEntry 5 } -- BGP4 Redistribution of Routes Table snBgp4RedisTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4RedisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain." ::= { snBgp4Redis 1 } snBgp4RedisEntry OBJECT-TYPE SYNTAX SnBgp4RedisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain." INDEX { snBgp4RedisProtocol } ::= { snBgp4RedisTable 1 } SnBgp4RedisEntry ::= SEQUENCE { snBgp4RedisProtocol INTEGER, snBgp4RedisMetric INTEGER, snBgp4RedisRouteMap OCTET STRING, snBgp4RedisWeight INTEGER, snBgp4RedisMatchInternal INTEGER, snBgp4RedisMatchExternal1 INTEGER, snBgp4RedisMatchExternal2 INTEGER, snBgp4RedisRowStatus INTEGER } snBgp4RedisProtocol OBJECT-TYPE SYNTAX INTEGER { rip(1), ospf(2), static(3), connected(4), isis(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS." ::= { snBgp4RedisEntry 1 } snBgp4RedisMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The metric of using the specified protocol Metric value." ::= { snBgp4RedisEntry 2 } snBgp4RedisRouteMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4RedisEntry 3 } snBgp4RedisWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To assign a weight for the specified protocol." ::= { snBgp4RedisEntry 4 } snBgp4RedisMatchInternal OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 5 } snBgp4RedisMatchExternal1 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 6 } snBgp4RedisMatchExternal2 OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is only applicable to the OSPF protocol." ::= { snBgp4RedisEntry 7 } snBgp4RedisRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4RedisEntry 8 } -- Bgp4 Route Map Filter table snBgp4RouteMapFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4RouteMapFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 RouteMap Filter table." ::= { snBgp4RouteMapFilter 1 } snBgp4RouteMapFilterEntry OBJECT-TYPE SYNTAX SnBgp4RouteMapFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 RouteMap Filter table." INDEX { snBgp4RouteMapFilterMapName, snBgp4RouteMapFilterSequenceNum} ::= { snBgp4RouteMapFilterTable 1 } SnBgp4RouteMapFilterEntry ::= SEQUENCE { snBgp4RouteMapFilterMapName OCTET STRING, snBgp4RouteMapFilterSequenceNum INTEGER, snBgp4RouteMapFilterAction INTEGER, snBgp4RouteMapFilterRowStatus INTEGER } snBgp4RouteMapFilterMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4RouteMapFilterEntry 1 } snBgp4RouteMapFilterSequenceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number for this particular route-map." ::= { snBgp4RouteMapFilterEntry 2 } snBgp4RouteMapFilterAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Action to take if the bgp address match with this filter." ::= { snBgp4RouteMapFilterEntry 3 } snBgp4RouteMapFilterRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4RouteMapFilterEntry 4 } -- BGP4 Route Map Match Configuration Table snBgp4RouteMapMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4RouteMapMatchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Route Map Set table." ::= { snBgp4RouteMapMatch 1 } snBgp4RouteMapMatchEntry OBJECT-TYPE SYNTAX SnBgp4RouteMapMatchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Route Map Match table." INDEX { snBgp4RouteMapMatchMapName, snBgp4RouteMapMatchSequenceNum } ::= { snBgp4RouteMapMatchTable 1 } SnBgp4RouteMapMatchEntry ::= SEQUENCE { snBgp4RouteMapMatchMapName OCTET STRING, snBgp4RouteMapMatchSequenceNum INTEGER, snBgp4RouteMapMatchAsPathFilter OCTET STRING, snBgp4RouteMapMatchCommunityFilter OCTET STRING, snBgp4RouteMapMatchAddressFilter OCTET STRING, snBgp4RouteMapMatchMetric INTEGER, snBgp4RouteMapMatchNextHopList OCTET STRING, snBgp4RouteMapMatchRouteType INTEGER, snBgp4RouteMapMatchTagList OCTET STRING, snBgp4RouteMapMatchRowMask INTEGER, snBgp4RouteMapMatchAsPathAccessList OCTET STRING, snBgp4RouteMapMatchCommunityList OCTET STRING, snBgp4RouteMapMatchAddressAccessList OCTET STRING, snBgp4RouteMapMatchAddressPrefixList OCTET STRING, snBgp4RouteMapMatchNextHopAccessList OCTET STRING, snBgp4RouteMapMatchNextHopPrefixList OCTET STRING } snBgp4RouteMapMatchMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4RouteMapMatchEntry 1 } snBgp4RouteMapMatchSequenceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number for this particular route-map." ::= { snBgp4RouteMapMatchEntry 2 } snBgp4RouteMapMatchAsPathFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list." ::= { snBgp4RouteMapMatchEntry 3 } snBgp4RouteMapMatchCommunityFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list." ::= { snBgp4RouteMapMatchEntry 4 } snBgp4RouteMapMatchAddressFilter OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 5 } snBgp4RouteMapMatchMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To match a metric for BGP routes." ::= { snBgp4RouteMapMatchEntry 6 } snBgp4RouteMapMatchNextHopList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list." ::= { snBgp4RouteMapMatchEntry 7 } snBgp4RouteMapMatchRouteType OBJECT-TYPE SYNTAX INTEGER { none(0), external(1), externalType1(2), externalType2(3), internal(4), local(5) } ACCESS read-write STATUS mandatory DESCRIPTION "To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET." ::= { snBgp4RouteMapMatchEntry 8 } snBgp4RouteMapMatchTagList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "To match a BGP tag access list." ::= { snBgp4RouteMapMatchEntry 9 } snBgp4RouteMapMatchRowMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset" ::= { snBgp4RouteMapMatchEntry 10 } snBgp4RouteMapMatchAsPathAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list." ::= { snBgp4RouteMapMatchEntry 11 } snBgp4RouteMapMatchCommunityList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list." ::= { snBgp4RouteMapMatchEntry 12 } snBgp4RouteMapMatchAddressAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 13 } snBgp4RouteMapMatchAddressPrefixList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..170)) ACCESS read-write STATUS mandatory DESCRIPTION "Prefix list To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 14 } snBgp4RouteMapMatchNextHopAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 15 } snBgp4RouteMapMatchNextHopPrefixList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..170)) ACCESS read-write STATUS mandatory DESCRIPTION "Prefix list To match a BGP address access list." ::= { snBgp4RouteMapMatchEntry 16 } -- BGP4 Route Map Set Configuration Table snBgp4RouteMapSetTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4RouteMapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Route Map Set table." ::= { snBgp4RouteMapSet 1 } snBgp4RouteMapSetEntry OBJECT-TYPE SYNTAX SnBgp4RouteMapSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Route Map Set table." INDEX { snBgp4RouteMapSetMapName, snBgp4RouteMapSetSequenceNum } ::= { snBgp4RouteMapSetTable 1 } SnBgp4RouteMapSetEntry ::= SEQUENCE { snBgp4RouteMapSetMapName OCTET STRING, snBgp4RouteMapSetSequenceNum INTEGER, snBgp4RouteMapSetAsPathType INTEGER, snBgp4RouteMapSetAsPathString OCTET STRING, snBgp4RouteMapSetAutoTag INTEGER, snBgp4RouteMapSetCommunityType INTEGER, snBgp4RouteMapSetCommunityNum INTEGER, snBgp4RouteMapSetCommunityAdditive INTEGER, snBgp4RouteMapSetLocalPreference INTEGER, snBgp4RouteMapSetMetric INTEGER, snBgp4RouteMapSetNextHop IpAddress, snBgp4RouteMapSetOrigin INTEGER, snBgp4RouteMapSetTag INTEGER, snBgp4RouteMapSetWeight INTEGER, snBgp4RouteMapSetRowMask INTEGER, snBgp4RouteMapSetCommunityNums OCTET STRING, snBgp4RouteMapSetDampenHalfLife INTEGER, snBgp4RouteMapSetDampenReuse INTEGER, snBgp4RouteMapSetDampenSuppress INTEGER, snBgp4RouteMapSetDampenMaxSuppress INTEGER } snBgp4RouteMapSetMapName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "An octet string of the route-map name, each character of the name is represented by one octet." ::= { snBgp4RouteMapSetEntry 1 } snBgp4RouteMapSetSequenceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number for this particular route-map." ::= { snBgp4RouteMapSetEntry 2 } snBgp4RouteMapSetAsPathType OBJECT-TYPE SYNTAX INTEGER { tag(0), prepend(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map." ::= { snBgp4RouteMapSetEntry 3 } snBgp4RouteMapSetAsPathString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1)." ::= { snBgp4RouteMapSetEntry 4 } snBgp4RouteMapSetAutoTag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable the automatic-tag for BGP routes." ::= { snBgp4RouteMapSetEntry 5 } snBgp4RouteMapSetCommunityType OBJECT-TYPE SYNTAX INTEGER { nums(0), none(3)} ACCESS read-write STATUS mandatory DESCRIPTION "To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00" ::= { snBgp4RouteMapSetEntry 6 } snBgp4RouteMapSetCommunityNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0)." ::= { snBgp4RouteMapSetEntry 7 } snBgp4RouteMapSetCommunityAdditive OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To add the community to the already existing communities." ::= { snBgp4RouteMapSetEntry 8 } snBgp4RouteMapSetLocalPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To modify a local-preference for BGP routes." ::= { snBgp4RouteMapSetEntry 9 } snBgp4RouteMapSetMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To modify a metric for BGP routes." ::= { snBgp4RouteMapSetEntry 10 } snBgp4RouteMapSetNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "To modify the IP address of the next hop for BGP routes." ::= { snBgp4RouteMapSetEntry 11 } snBgp4RouteMapSetOrigin OBJECT-TYPE SYNTAX INTEGER { igp(0), egp(1), incomplete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "To set the BGP origin code." ::= { snBgp4RouteMapSetEntry 12 } snBgp4RouteMapSetTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To specify the tag for BGP routes." ::= { snBgp4RouteMapSetEntry 13 } snBgp4RouteMapSetWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "To specify the BGP weight for the routing table." ::= { snBgp4RouteMapSetEntry 14 } snBgp4RouteMapSetRowMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset" ::= { snBgp4RouteMapSetEntry 15 } snBgp4RouteMapSetCommunityNums OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..24)) ACCESS read-write STATUS mandatory DESCRIPTION "Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs." ::= { snBgp4RouteMapSetEntry 16 } snBgp4RouteMapSetDampenHalfLife OBJECT-TYPE SYNTAX INTEGER (1..45) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Route Map Dampening Half Life." ::= { snBgp4RouteMapSetEntry 17 } snBgp4RouteMapSetDampenReuse OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Route Map Dampening Reuse." ::= { snBgp4RouteMapSetEntry 18 } snBgp4RouteMapSetDampenSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Route Map Dampening Suppress." ::= { snBgp4RouteMapSetEntry 19 } snBgp4RouteMapSetDampenMaxSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Route Map Dampening Max Suppress Time." ::= { snBgp4RouteMapSetEntry 20 } -- Bgp4 Neighbor Operational Status Table snBgp4NeighOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor Operational Status table." ::= { snBgp4NeighOperStatus 1 } snBgp4NeighOperStatusEntry OBJECT-TYPE SYNTAX SnBgp4NeighOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Operational Status table." INDEX { snBgp4NeighOperStatusIndex } ::= { snBgp4NeighOperStatusTable 1 } SnBgp4NeighOperStatusEntry ::= SEQUENCE { snBgp4NeighOperStatusIndex INTEGER, snBgp4NeighOperStatusIp IpAddress, snBgp4NeighOperStatusRemoteAs INTEGER, snBgp4NeighOperStatusBgpType INTEGER, snBgp4NeighOperStatusState INTEGER, snBgp4NeighOperStatusKeepAliveTime INTEGER, snBgp4NeighOperStatusHoldTime INTEGER, snBgp4NeighOperStatusAdvertlevel INTEGER, snBgp4NeighOperStatusKeepAliveTxCounts Counter, snBgp4NeighOperStatusKeepAliveRxCounts Counter, snBgp4NeighOperStatusUpdateTxCounts Counter, snBgp4NeighOperStatusUpdateRxCounts Counter, snBgp4NeighOperStatusNotifTxCounts Counter, snBgp4NeighOperStatusNotifRxCounts Counter, snBgp4NeighOperStatusOpenTxCounts Counter, snBgp4NeighOperStatusOpenRxCounts Counter } snBgp4NeighOperStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for a neighbor entry." ::= { snBgp4NeighOperStatusEntry 1 } snBgp4NeighOperStatusIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighOperStatusEntry 2 } snBgp4NeighOperStatusRemoteAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show a neighbor with an autonomous system number(AS)." ::= { snBgp4NeighOperStatusEntry 3 } snBgp4NeighOperStatusBgpType OBJECT-TYPE SYNTAX INTEGER { ebgp(0), ibgp(1) } ACCESS read-only STATUS mandatory DESCRIPTION "To show the type of BGP protocol whether is internal or external." ::= { snBgp4NeighOperStatusEntry 4 } snBgp4NeighOperStatusState OBJECT-TYPE SYNTAX INTEGER { noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6) } ACCESS read-only STATUS mandatory DESCRIPTION "To show the state of this neighbor." ::= { snBgp4NeighOperStatusEntry 5 } snBgp4NeighOperStatusKeepAliveTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Keep alive timer." ::= { snBgp4NeighOperStatusEntry 6 } snBgp4NeighOperStatusHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Hold time timer." ::= { snBgp4NeighOperStatusEntry 7 } snBgp4NeighOperStatusAdvertlevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the minimum interval between the sending of BGP routing updates." ::= { snBgp4NeighOperStatusEntry 8 } snBgp4NeighOperStatusKeepAliveTxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Keep alive message sent counts." ::= { snBgp4NeighOperStatusEntry 9 } snBgp4NeighOperStatusKeepAliveRxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Keep alive message received counts." ::= { snBgp4NeighOperStatusEntry 10 } snBgp4NeighOperStatusUpdateTxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Update message sent counts." ::= { snBgp4NeighOperStatusEntry 11 } snBgp4NeighOperStatusUpdateRxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Update message received counts." ::= { snBgp4NeighOperStatusEntry 12 } snBgp4NeighOperStatusNotifTxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Notification message sent counts." ::= { snBgp4NeighOperStatusEntry 13 } snBgp4NeighOperStatusNotifRxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Notification message received counts." ::= { snBgp4NeighOperStatusEntry 14 } snBgp4NeighOperStatusOpenTxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Open message sent counts." ::= { snBgp4NeighOperStatusEntry 15 } snBgp4NeighOperStatusOpenRxCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Open message received counts." ::= { snBgp4NeighOperStatusEntry 16 } -- Bgp4 Routes Operational Status Table snBgp4RouteOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4RouteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Routebor Operational Status table." ::= { snBgp4RouteOperStatus 1 } snBgp4RouteOperStatusEntry OBJECT-TYPE SYNTAX SnBgp4RouteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Operational Status table." INDEX { snBgp4RouteOperStatusIndex } ::= { snBgp4RouteOperStatusTable 1 } SnBgp4RouteOperStatusEntry ::= SEQUENCE { snBgp4RouteOperStatusIndex INTEGER, snBgp4RouteOperStatusIp IpAddress, snBgp4RouteOperStatusSubnetMask IpAddress, snBgp4RouteOperStatusNextHop IpAddress, snBgp4RouteOperStatusMetric INTEGER, snBgp4RouteOperStatusLocalPreference INTEGER, snBgp4RouteOperStatusWeight INTEGER, snBgp4RouteOperStatusOrigin INTEGER, snBgp4RouteOperStatusStatus INTEGER, snBgp4RouteOperStatusRouteTag INTEGER, snBgp4RouteOperStatusCommunityList OCTET STRING, snBgp4RouteOperStatusAsPathList OCTET STRING } snBgp4RouteOperStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for a route entry." ::= { snBgp4RouteOperStatusEntry 1 } snBgp4RouteOperStatusIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a route entry." ::= { snBgp4RouteOperStatusEntry 2 } snBgp4RouteOperStatusSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Subnet Mask for a route entry." ::= { snBgp4RouteOperStatusEntry 3 } snBgp4RouteOperStatusNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The next-hop IP for a route entry." ::= { snBgp4RouteOperStatusEntry 4 } snBgp4RouteOperStatusMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the metric value of a route entry." ::= { snBgp4RouteOperStatusEntry 5 } snBgp4RouteOperStatusLocalPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the local preference of a route entry." ::= { snBgp4RouteOperStatusEntry 6 } snBgp4RouteOperStatusWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the weight of this route." ::= { snBgp4RouteOperStatusEntry 7 } snBgp4RouteOperStatusOrigin OBJECT-TYPE SYNTAX INTEGER { igp(0), egp(1), incomplete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "To show the origin of this route." ::= { snBgp4RouteOperStatusEntry 8 } snBgp4RouteOperStatusStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid." ::= { snBgp4RouteOperStatusEntry 9 } snBgp4RouteOperStatusRouteTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the route tag of this route." ::= { snBgp4RouteOperStatusEntry 10 } snBgp4RouteOperStatusCommunityList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02" ::= { snBgp4RouteOperStatusEntry 11 } snBgp4RouteOperStatusAsPathList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs." ::= { snBgp4RouteOperStatusEntry 12 } -- Bgp4 Neighbor Summary Table snBgp4NeighborSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighborSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Routebor Operational Status table." ::= { snBgp4NeighborSummary 1 } snBgp4NeighborSummaryEntry OBJECT-TYPE SYNTAX SnBgp4NeighborSummaryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Operational Status table." INDEX { snBgp4NeighborSummaryIndex } ::= { snBgp4NeighborSummaryTable 1 } SnBgp4NeighborSummaryEntry ::= SEQUENCE { snBgp4NeighborSummaryIndex INTEGER, snBgp4NeighborSummaryIp IpAddress, snBgp4NeighborSummaryState INTEGER, snBgp4NeighborSummaryStateChgTime INTEGER, snBgp4NeighborSummaryRouteReceived INTEGER, snBgp4NeighborSummaryRouteInstalled INTEGER } snBgp4NeighborSummaryIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for a route entry." ::= { snBgp4NeighborSummaryEntry 1 } snBgp4NeighborSummaryIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a route entry." ::= { snBgp4NeighborSummaryEntry 2 } snBgp4NeighborSummaryState OBJECT-TYPE SYNTAX INTEGER { noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6) } ACCESS read-only STATUS mandatory DESCRIPTION "To show the state of this neighbor." ::= { snBgp4NeighborSummaryEntry 3 } snBgp4NeighborSummaryStateChgTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time of a change of the state of this neighbor." ::= { snBgp4NeighborSummaryEntry 4 } snBgp4NeighborSummaryRouteReceived OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of routes received of this neighbor." ::= { snBgp4NeighborSummaryEntry 5 } snBgp4NeighborSummaryRouteInstalled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of routes installed of this neighbor." ::= { snBgp4NeighborSummaryEntry 6 } -- Bgp4 Attribute Entries Table snBgp4AttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4AttributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Attribute entries table." ::= { snBgp4Attribute 1 } snBgp4AttributeEntry OBJECT-TYPE SYNTAX SnBgp4AttributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Attribute table." INDEX { snBgp4AttributeIndex } ::= { snBgp4AttributeTable 1 } SnBgp4AttributeEntry ::= SEQUENCE { snBgp4AttributeIndex INTEGER, snBgp4AttributeNextHop IpAddress, snBgp4AttributeMetric INTEGER, snBgp4AttributeOrigin INTEGER, snBgp4AttributeAggregatorAs INTEGER, snBgp4AttributeRouterId IpAddress, snBgp4AttributeAtomicAggregatePresent INTEGER, snBgp4AttributeLocalPreference INTEGER, snBgp4AttributeCommunityList OCTET STRING, snBgp4AttributeAsPathList OCTET STRING, snBgp4AttributeOriginator IpAddress, snBgp4AttributeClusterList OCTET STRING } snBgp4AttributeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index for a route entry." ::= { snBgp4AttributeEntry 1 } snBgp4AttributeNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The next-hop IP for a route entry." ::= { snBgp4AttributeEntry 2 } snBgp4AttributeMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the metric value of a route entry." ::= { snBgp4AttributeEntry 3 } snBgp4AttributeOrigin OBJECT-TYPE SYNTAX INTEGER { igp(0), egp(1), incomplete(2) } ACCESS read-only STATUS mandatory DESCRIPTION "To show the origin of this route." ::= { snBgp4AttributeEntry 4 } snBgp4AttributeAggregatorAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The aggregator AS number for an attribute entry." ::= { snBgp4AttributeEntry 5 } snBgp4AttributeRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The router ID for an attribute entry." ::= { snBgp4AttributeEntry 6 } snBgp4AttributeAtomicAggregatePresent OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The atomic aggregate present in an attribute entry." ::= { snBgp4AttributeEntry 7 } snBgp4AttributeLocalPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "To show the local preference of a route entry." ::= { snBgp4AttributeEntry 8 } snBgp4AttributeCommunityList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02" ::= { snBgp4AttributeEntry 9 } snBgp4AttributeAsPathList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs." ::= { snBgp4AttributeEntry 10 } snBgp4AttributeOriginator OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The originator IP address for an attribute entry." ::= { snBgp4AttributeEntry 11 } snBgp4AttributeClusterList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address." ::= { snBgp4AttributeEntry 12 } -- Bgp4 Clear Neighbor Command Table snBgp4ClearNeighborCmdTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4ClearNeighborCmdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Clear Bgp4 command table." ::= { snBgp4ClearNeighborCmd 1 } snBgp4ClearNeighborCmdEntry OBJECT-TYPE SYNTAX SnBgp4ClearNeighborCmdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the clear Bgp4 neighbor command table." INDEX { snBgp4ClearNeighborCmdIp } ::= { snBgp4ClearNeighborCmdTable 1 } SnBgp4ClearNeighborCmdEntry ::= SEQUENCE { snBgp4ClearNeighborCmdIp IpAddress, snBgp4ClearNeighborCmdElement INTEGER } snBgp4ClearNeighborCmdIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors." ::= { snBgp4ClearNeighborCmdEntry 1 } snBgp4ClearNeighborCmdElement OBJECT-TYPE SYNTAX INTEGER { valid(0), lastPacketWithError(1), notificationErrors(2), softOutbound(3), traffic(4), neighbor(5) } ACCESS read-write STATUS mandatory DESCRIPTION "To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get." ::= { snBgp4ClearNeighborCmdEntry 2 } -- Bgp4 Neighbor Prefix Group Table snBgp4NeighPrefixGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SnBgp4NeighPrefixGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bgp4 Neighbor Prefix Group table." ::= { snBgp4NeighPrefixGroup 1 } snBgp4NeighPrefixGroupEntry OBJECT-TYPE SYNTAX SnBgp4NeighPrefixGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Bgp4 Prefix Group table." INDEX { snBgp4NeighPrefixGroupNeighIp, snBgp4NeighPrefixGroupDir } ::= { snBgp4NeighPrefixGroupTable 1 } SnBgp4NeighPrefixGroupEntry ::= SEQUENCE { snBgp4NeighPrefixGroupNeighIp IpAddress, snBgp4NeighPrefixGroupDir INTEGER, snBgp4NeighPrefixGroupInAccessList OCTET STRING, snBgp4NeighPrefixGroupOutAccessList OCTET STRING, snBgp4NeighPrefixGroupRowStatus INTEGER } snBgp4NeighPrefixGroupNeighIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address for a neighbor entry." ::= { snBgp4NeighPrefixGroupEntry 1 } snBgp4NeighPrefixGroupDir OBJECT-TYPE SYNTAX INTEGER { out(0), in(1) } ACCESS read-only STATUS mandatory DESCRIPTION "The incoming/outgoing advertisements to which the access list is applied." ::= { snBgp4NeighPrefixGroupEntry 2 } snBgp4NeighPrefixGroupInAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An in access prefix list name. " ::= { snBgp4NeighPrefixGroupEntry 3 } snBgp4NeighPrefixGroupOutAccessList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An out prefix list name. " ::= { snBgp4NeighPrefixGroupEntry 4 } snBgp4NeighPrefixGroupRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snBgp4NeighPrefixGroupEntry 5 } END