HP-SN-IPX-MIB DEFINITIONS ::= BEGIN


-- Foundry SnIpx Group MIB Release 1.0.0
-- Revision 0 1/7/97

-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base 
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions


-- Imports

IMPORTS
    Counter 
        FROM RFC1155-SMI
	OBJECT-TYPE             
		FROM RFC-1212
	snIpx
		FROM HP-SN-ROOT-MIB;

	-- textual conventions


	--  RtrStatus Values

	     RtrStatus ::= INTEGER { disabled(0), enabled(1) }

	--  Clear Status Values

	     ClearStatus ::= INTEGER { normal(0), clear(1) }

	--  Port index

	     PortIndex ::= INTEGER (1..3900)

	--  Action 

		Action ::= INTEGER { deny(0), permit(1) }


        PhysAddress ::= OCTET STRING
    -- This data type is used to model media addresses.  For many
    -- types of media, this will be in a binary representation.
    -- For example, an ethernet address would be represented as
    -- a string of 6 octets.

        NetNumber ::= OCTET STRING (SIZE(4))


-- SECTION 2: MIB 

-- Router IPX MIB

snIpxGen			OBJECT IDENTIFIER ::= { snIpx 1 }
snIpxCache			OBJECT IDENTIFIER ::= { snIpx 2 }
snIpxRoute			OBJECT IDENTIFIER ::= { snIpx 3 }
snIpxServer			OBJECT IDENTIFIER ::= { snIpx 4 }
snIpxFwdFilter		OBJECT IDENTIFIER ::= { snIpx 5 }
snIpxRipFilter		OBJECT IDENTIFIER ::= { snIpx 6 }
snIpxSapFilter		OBJECT IDENTIFIER ::= { snIpx 7 }
snIpxIfFwdAccess	OBJECT IDENTIFIER ::= { snIpx 8 }
snIpxIfRipAccess	OBJECT IDENTIFIER ::= { snIpx 9 }
snIpxIfSapAccess	OBJECT IDENTIFIER ::= { snIpx 10 }
snIpxPortAddr		OBJECT IDENTIFIER ::= { snIpx 11 }
snIpxPortCounters	OBJECT IDENTIFIER ::= { snIpx 12 }

-- IPX General MIBs

snIpxRoutingMode 	     OBJECT-TYPE
	SYNTAX	RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enabled/Disabled System IPX Routing Mode status."
	::= { snIpxGen 1 }

snIpxNetBiosFilterMode		    OBJECT-TYPE
	SYNTAX	RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enabled/Disabled NetBios Filter Mode status."
	::= { snIpxGen 2 }

                
snIpxClearCache 		OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear cache table."
	::= { snIpxGen 3 }

snIpxClearRoute 		OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear ipx route table."
	::= { snIpxGen 4 }

snIpxClearTrafficCnts		OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear ipx all traffic counters.
		 - snIpxRcvPktsCnt, snIpxFwdPktsCnt,
		   snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
		   snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt."
	::= { snIpxGen 5 }


snIpxRcvPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX incoming packets counter."
	::= { snIpxGen 6 }


snIpxTxPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Outgoing packets counter."
	::= { snIpxGen 7 }


snIpxFwdPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX forwarding packets counter."
	::= { snIpxGen 8 }

snIpxRcvDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX receiving drop packets counter."
	::= { snIpxGen 9 }

snIpxRcvFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX receiving filter packets counter."
	::= { snIpxGen 10 }

snIpxRipGblFiltList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An IPX RIP Global Filter List."
	::= { snIpxGen 11 }

snIpxRipFiltOnAllPort		OBJECT-TYPE
	SYNTAX	 INTEGER {
	    valid(1),
	    deleteAllInBound(2),
	    deleteAllOutBound(3),
	    addAllInBound(4),
	    addAllOutBound(5)
	}
	ACCESS	read-write
	STATUS  mandatory
	DESCRIPTION
	"Apply the IPX RIP Global filter list snIpxRipGblFiltList to 
	 all interfaces. This object is used to add all RIP filter 
	 lists and delete all RIP filter lists to/from all ports.
	 Prior to sending this command, snIpxRipGblFiltList must be ready.
	 The values that can be written are:
     deleteAllInBound(2)...delete all in-bound filter lists from all ports. 
	 deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
	 addAllInBound(4)......add all in-bound filter lists to all ports.
	 addAllOutBound(5).....add all out-bound filter lists to all ports.

	 If set operation is failed, then a SET with
	 value of (2)or(3) returns error 'GenError'. 
	 Deleted(2)&(3) go away immediately. 
	 The following values can be returned on reads:
	 noSuch(0)...no such operation yet.
	 valid(1)....set operation is done and is valid"

	::= { snIpxGen 12 }

snIpxSapGblFiltList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An IPX SAP Global Filter List."
	::= { snIpxGen 13 }


snIpxSapFiltOnAllPort		OBJECT-TYPE
	SYNTAX	 INTEGER {
	    valid(1),
	    deleteAllInBound(2),
	    deleteAllOutBound(3),
	    addAllInBound(4),
	    addAllOutBound(5)
	}
	ACCESS	read-write
	STATUS  mandatory
	DESCRIPTION
	"Apply the IPX SAP Global filter list snIpxSapGblFiltList to 
	 all interfaces. This object is used to add all RIP filter 
	 lists and delete all SAP filter lists to/from all ports.
	 Prior to sending this command, snIpxSapGblFiltList must be ready.
	 The values that can be written are:
     deleteAllInBound(2)...delete all in-bound filter lists from all ports. 
	 deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
	 addAllInBound(4)......add all in-bound filter lists to all ports.
	 addAllOutBound(5).....add all out-bound filter lists to all ports.

	 If set operation is failed, then a SET with
	 value of (2)or(3) returns error 'GenError'. 
	 Deleted(2)&(3) go away immediately. 
	 The following values can be returned on reads:
	 noSuch(0)...no such operation yet.
	 valid(1)....set operation is done and is valid"
	::= { snIpxGen 14 }

snIpxTxDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX transmitting drop packets counter."
	::= { snIpxGen 15 }

snIpxTxFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX transmitting filter packets counter."
	::= { snIpxGen 16 }


-- IPX Cache table

snIpxCacheTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxCacheEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX Cache table."
	::= { snIpxCache 1 }

snIpxCacheEntry  OBJECT-TYPE
	SYNTAX	SnIpxCacheEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Cache table."
	INDEX	{ snIpxCacheIndex }
	::= { snIpxCacheTable 1 }

SnIpxCacheEntry ::= SEQUENCE {
	snIpxCacheIndex
		INTEGER,
    snIpxCacheNetNum
        NetNumber,
    snIpxCacheNode
        PhysAddress,
    snIpxCacheOutFilter
        RtrStatus,
    snIpxCacheEncap  
        INTEGER,
	snIpxCachePort
		PortIndex
	}

snIpxCacheIndex  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for a IPX Cache entry."
	::= { snIpxCacheEntry 1 }


snIpxCacheNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"Cache Network number."
	::= { snIpxCacheEntry 2 }

snIpxCacheNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Cache Node Number."
	::= { snIpxCacheEntry 3 }

snIpxCacheOutFilter	OBJECT-TYPE
	SYNTAX	RtrStatus
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Cache Outbound Filter is ether disabled(0) or enabled(1)."
	::= { snIpxCacheEntry 4 }

snIpxCacheEncap  OBJECT-TYPE
	SYNTAX	 INTEGER {
	    ethernetII(1),
	    ethernet8022(2),
	    ethernet8023(3),
	    ethernetSnap(4)
	}
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The IPX encapsulation frame type."
	::= { snIpxCacheEntry 5 }


snIpxCachePort  OBJECT-TYPE
	SYNTAX	PortIndex
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Router Port number." 
	::= { snIpxCacheEntry 6 }




-- IPX route table

snIpxRouteTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxRouteEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX route table."
	::= { snIpxRoute 1 }

snIpxRouteEntry  OBJECT-TYPE
	SYNTAX	SnIpxRouteEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX route table."
	INDEX	{ snIpxRouteIndex }
	::= { snIpxRouteTable 1 }

SnIpxRouteEntry ::= SEQUENCE {
	snIpxRouteIndex
		INTEGER,
	snIpxDestNetNum
		NetNumber,
	snIpxFwdRouterNode
		PhysAddress,
	snIpxDestHopCnts
		INTEGER,
	snIpxRouteMetric
		INTEGER,
	snIpxDestPort
	    INTEGER
	}

snIpxRouteIndex  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for a IPX route entry."
	::= { snIpxRouteEntry 1 }

snIpxDestNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"Destination Network number."
	::= { snIpxRouteEntry 2 }

snIpxFwdRouterNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Forward Router Node Number."
	::= { snIpxRouteEntry 3 }

snIpxDestHopCnts  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"Number of hops to reach the
		 destination."
	::= { snIpxRouteEntry 4 }

snIpxRouteMetric  OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The metrics to next hop router."
	::= { snIpxRouteEntry 5 }

snIpxDestPort  OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The destination port."
	::= { snIpxRouteEntry 6 }


-- IPX Server table

snIpxServerTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX Server table."
	::= { snIpxServer 1 }

snIpxServerEntry  OBJECT-TYPE
	SYNTAX	SnIpxServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Server table."
	INDEX	{ snIpxServerIndex }
	::= { snIpxServerTable 1 }

SnIpxServerEntry ::= SEQUENCE {
	snIpxServerIndex
		INTEGER,
	snIpxServerType
		INTEGER,
    snIpxServerNetNum
        NetNumber,
    snIpxServerNode
        PhysAddress,
    snIpxServerSocket
        INTEGER,
    snIpxServerHopCnts  
        INTEGER,
	snIpxServerName
		OCTET STRING
	}

snIpxServerIndex  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for a IPX Server entry."
	::= { snIpxServerEntry 1 }


snIpxServerType  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Server Type."
	::= { snIpxServerEntry 2 }

snIpxServerNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"Server Network number."
	::= { snIpxServerEntry 3 }

snIpxServerNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Server Node Number."
	::= { snIpxServerEntry 4 }

snIpxServerSocket	OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Server Socket Number."
	::= { snIpxServerEntry 5 }

snIpxServerHopCnts  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"Number of intervening networks to reach the
		 server."
	::= { snIpxServerEntry 6 }


snIpxServerName  OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..47))
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Server Name."
	::= { snIpxServerEntry 7 }



-- IPX Forward Filter table

snIpxFwdFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxFwdFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX Forward Filter table."
	::= { snIpxFwdFilter 1 }

snIpxFwdFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxFwdFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Forward Filter table."
	INDEX	{ snIpxFwdFilterIdx }
	::= { snIpxFwdFilterTable 1 }

SnIpxFwdFilterEntry ::= SEQUENCE {
	snIpxFwdFilterIdx
		INTEGER,
	snIpxFwdFilterAction
		Action,
	snIpxFwdFilterSocket
		INTEGER,
	snIpxFwdFilterSrcNet
		NetNumber,
	snIpxFwdFilterSrcNode
		PhysAddress,
	snIpxFwdFilterDestNet
		NetNumber,
	snIpxFwdFilterDestNode
		PhysAddress,
	snIpxFwdFilterRowStatus
		INTEGER
	}

snIpxFwdFilterIdx       OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxFwdFilterEntry 1 }

snIpxFwdFilterAction	  OBJECT-TYPE
	SYNTAX  Action 
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxFwdFilterEntry 2 }

snIpxFwdFilterSocket	OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"IPX Forward Filter Socket Number."
	::= { snIpxFwdFilterEntry 3 }

snIpxFwdFilterSrcNet	OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Source Network Number."
	::= { snIpxFwdFilterEntry 4 }

snIpxFwdFilterSrcNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Source Node Number."
	::= { snIpxFwdFilterEntry 5 }

snIpxFwdFilterDestNet	 OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Destination Network Number."
	::= { snIpxFwdFilterEntry 6 }

snIpxFwdFilterDestNode	OBJECT-TYPE
	SYNTAX	PhysAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Destination Node Number."
	::= { snIpxFwdFilterEntry 7 }

snIpxFwdFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxFwdFilterEntry 8 }



-- IPX RIP Filter table

snIpxRipFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxRipFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX RIP Filter table."
	::= { snIpxRipFilter 1 }

snIpxRipFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxRipFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX RIP Filter table."
	INDEX	{ snIpxRipFilterId }
	::= { snIpxRipFilterTable 1 }

SnIpxRipFilterEntry ::= SEQUENCE {
	snIpxRipFilterId
		INTEGER,
	snIpxRipFilterAction
		Action,
	snIpxRipFilterNet
		NetNumber,
	snIpxRipFilterMask
		NetNumber,
	snIpxRipFilterRowStatus
		INTEGER
	}

snIpxRipFilterId       OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxRipFilterEntry 1 }

snIpxRipFilterAction	  OBJECT-TYPE
	SYNTAX  Action 
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxRipFilterEntry 2 }

snIpxRipFilterNet    OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"IPX RIP Filter Network number."
	::= { snIpxRipFilterEntry 3 }

snIpxRipFilterMask    OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"IPX RIP Filter Network/Subnet Mask."
	::= { snIpxRipFilterEntry 4 }


snIpxRipFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxRipFilterEntry 5 }



-- IPX SAP Filter table

snIpxSapFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxSapFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX SAP Filter table."
	::= { snIpxSapFilter 1 }

snIpxSapFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxSapFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX SAP Filter table."
	INDEX	{ snIpxSapFilterId }
	::= { snIpxSapFilterTable 1 }

SnIpxSapFilterEntry ::= SEQUENCE {
	snIpxSapFilterId
		INTEGER,
	snIpxSapFilterAction
		Action,
	snIpxSapFilterType
		INTEGER,
	snIpxSapFilterName
		OCTET STRING,
	snIpxSapFilterRowStatus
		INTEGER
	}

snIpxSapFilterId       OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxSapFilterEntry 1 }

snIpxSapFilterAction	  OBJECT-TYPE
	SYNTAX  Action 
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxSapFilterEntry 2 }

snIpxSapFilterType    OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"IPX SAP Filter type to be matched."
	::= { snIpxSapFilterEntry 3 }

snIpxSapFilterName    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..47))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"IPX SAP Filter Name."  
	::= { snIpxSapFilterEntry 4 }


snIpxSapFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxSapFilterEntry 5 }


-- IPX IF Forward Access table

snIpxIfFwdAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfFwdAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX IF Forward Access table."
	::= { snIpxIfFwdAccess 1 }

snIpxIfFwdAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfFwdAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfFwdAccessPort, snIpxIfFwdAccessDir }
	::= { snIpxIfFwdAccessTable 1 }

SnIpxIfFwdAccessEntry ::= SEQUENCE {
	snIpxIfFwdAccessPort
		INTEGER,
	snIpxIfFwdAccessDir
		INTEGER,
	snIpxIfFwdAccessFilterList
		OCTET STRING,
	snIpxIfFwdAccessRowStatus
		INTEGER
	}

snIpxIfFwdAccessPort	   OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The IPX interface to which the Forward Filter applies."
	::= { snIpxIfFwdAccessEntry 1 }

snIpxIfFwdAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfFwdAccessEntry 2 }

snIpxIfFwdAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An IPX IF Forward Filter List."
	::= { snIpxIfFwdAccessEntry 3 }


snIpxIfFwdAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
            modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfFwdAccessEntry 4 }



-- IPX IF RIP Access table

snIpxIfRipAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfRipAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX IF RIP Access table."
	::= { snIpxIfRipAccess 1 }

snIpxIfRipAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfRipAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfRipAccessPort, snIpxIfRipAccessDir }
	::= { snIpxIfRipAccessTable 1 }

SnIpxIfRipAccessEntry ::= SEQUENCE {
	snIpxIfRipAccessPort
		INTEGER,
	snIpxIfRipAccessDir
		INTEGER,
	snIpxIfRipAccessFilterList
		OCTET STRING,
	snIpxIfRipAccessRowStatus
		INTEGER
	}

snIpxIfRipAccessPort	   OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The IPX interface to which the RIP Filter applies."
	::= { snIpxIfRipAccessEntry 1 }

snIpxIfRipAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfRipAccessEntry 2 }

snIpxIfRipAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An IPX IF RIP Access Filter List."
	::= { snIpxIfRipAccessEntry 3 }


snIpxIfRipAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfRipAccessEntry 4 }


-- IPX IF SAP Access table

snIpxIfSapAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfSapAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX IF RIP Access table."
	::= { snIpxIfSapAccess 1 }

snIpxIfSapAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfSapAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfSapAccessPort, snIpxIfSapAccessDir }
	::= { snIpxIfSapAccessTable 1 }

SnIpxIfSapAccessEntry ::= SEQUENCE {
	snIpxIfSapAccessPort
		INTEGER,
	snIpxIfSapAccessDir
		INTEGER,
	snIpxIfSapAccessFilterList
		OCTET STRING,
	snIpxIfSapAccessRowStatus
		INTEGER
	}

snIpxIfSapAccessPort	   OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The IPX interface to which the SAP Filter applies."
	::= { snIpxIfSapAccessEntry 1 }

snIpxIfSapAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfSapAccessEntry 2 }

snIpxIfSapAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An IPX IF SAP Access Filter List."
	::= { snIpxIfSapAccessEntry 3 }


snIpxIfSapAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfSapAccessEntry 4 }


-- ipx interface address table

snIpxPortAddrTable	       OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxPortAddrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX port address table."
	::= { snIpxPortAddr 1 }

snIpxPortAddrEntry	       OBJECT-TYPE
	SYNTAX	SnIpxPortAddrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Port Address table."
	INDEX	{ snIpxPortAddrPort, snIpxPortAddrEncap }
	::= { snIpxPortAddrTable 1 }

SnIpxPortAddrEntry ::= SEQUENCE {
	snIpxPortAddrPort
		PortIndex,
	snIpxPortAddrEncap
		INTEGER,
	snIpxPortAddrNetNum
		NetNumber,
	snIpxPortAddrRowStatus
		INTEGER,
	snIpxPortAddrNetBiosFilterMode
		RtrStatus
	}


snIpxPortAddrPort	       OBJECT-TYPE
	SYNTAX  PortIndex
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index for port address entry."
	::= { snIpxPortAddrEntry 1 }

snIpxPortAddrEncap	      OBJECT-TYPE
	SYNTAX	 INTEGER {
		ethernet8022(1),
	    ethernet8023(2),
	    ethernetII(3),
	    ethernetSnap(4)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The IPX encapsulation type.
		ethernet8022(1), ethernet8023(2),
	    ethernetII(3),  ethernetSnap(4)  
	    Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
	    a SNMP-SET error will be returned."
	::= { snIpxPortAddrEntry 2 }

snIpxPortAddrNetNum	       OBJECT-TYPE
	SYNTAX	NetNumber
	ACCESS	read-write
	STATUS  mandatory
	DESCRIPTION
		"An unique Network number for the IPX interface port."
	::= { snIpxPortAddrEntry 3 }

snIpxPortAddrRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxPortAddrEntry 4 }

snIpxPortAddrNetBiosFilterMode		    OBJECT-TYPE
	SYNTAX	RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enabled/Disabled NetBios Filter Mode status per Port Address entry."
	::= { snIpxPortAddrEntry 5 }


-- ipx port counters table

snIpxPortCountersTable	       OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxPortCountersEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"IPX port Counters table."
	::= { snIpxPortCounters 1 }

snIpxPortCountersEntry	       OBJECT-TYPE
	SYNTAX	SnIpxPortCountersEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IPX Port Counters table."
	INDEX	{ snIpxPortCountersPort }
	::= { snIpxPortCountersTable 1 }

SnIpxPortCountersEntry ::= SEQUENCE {
	snIpxPortCountersPort
		PortIndex,
	snIpxPortCountersRcvPktsCnt
	    Counter,
	snIpxPortCountersTxPktsCnt
	    Counter,
	snIpxPortCountersFwdPktsCnt
	    Counter,
	snIpxPortCountersRcvDropPktsCnt
	    Counter,
	snIpxPortCountersTxDropPktsCnt
	    Counter,
	snIpxPortCountersRcvFiltPktsCnt
	    Counter,
	snIpxPortCountersTxFiltPktsCnt
	    Counter
	}


snIpxPortCountersPort	       OBJECT-TYPE
	SYNTAX  PortIndex
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index for port Counters entry."
	::= { snIpxPortCountersEntry 1 }

snIpxPortCountersRcvPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX incoming packets counter for the interface."
	::= { snIpxPortCountersEntry 2 }


snIpxPortCountersTxPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Outgoing packets counter for the interface."
	::= { snIpxPortCountersEntry 3 }


snIpxPortCountersFwdPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX forwarding packets counter for the interface."
	::= { snIpxPortCountersEntry 4 }

snIpxPortCountersRcvDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX receiving drop packets counter for the interface."
	::= { snIpxPortCountersEntry 5 }

snIpxPortCountersTxDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX transmitting drop packets counter for the interface."
	::= { snIpxPortCountersEntry 6 }

snIpxPortCountersRcvFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX receiving filter packets counter for the interface."
	::= { snIpxPortCountersEntry 7 }

snIpxPortCountersTxFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter
	ACCESS	read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX transmitting filter packets counter for the interface."
	::= { snIpxPortCountersEntry 8 }



END