HP-SN-POS-GROUP-MIB DEFINITIONS ::= BEGIN


-- Foundry POS Group MIB Release 1.0.0
-- Revision 0 10/28/99

-- Copyright 1996-1999 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions


-- Imports

IMPORTS
	Counter, Gauge
		FROM RFC1155-SMI
	OBJECT-TYPE             
		FROM RFC-1212
	snPOS
		FROM HP-SN-ROOT-MIB;

	-- textual conventions
	-- maximum of ports are 32.  

	--  Status Values

	    POSStatus ::= INTEGER { disabled(0), enabled(1) }

	  DisplayString ::=
	      OCTET STRING
	  -- This data type is used to model textual information taken
	  -- from the NVT ASCII character set.  By convention, objects
	  -- with this syntax are declared as having
	  --
	  --      SIZE (0..255)
    

snPOSInfo						OBJECT IDENTIFIER	  ::= { snPOS 1  }

-- POS Port table information

snPOSInfoTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnPOSInfoEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A specific snPOSInfo group consists of a number of 
		 switch ports.  "
	::= { snPOSInfo 1 }

snPOSInfoEntry OBJECT-TYPE
	SYNTAX  SnPOSInfoEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the snPOSInfo table indicates the 
		 configuration on a specified port. A SNMP SET PDU 
		 for a row of the snPOSInfoTable requires the entired 
		 sequence of the MIB Objects in each 
		 snPOSInfoEntry stored in one PDU.  Otherwise, 
	 	 GENERR return-value will be returned."
	INDEX   { 
		snPOSInfoPortNum
	}
	::= { snPOSInfoTable 1 }

SnPOSInfoEntry ::= SEQUENCE {
	snPOSInfoPortNum
		INTEGER,
	snPOSIfIndex
		INTEGER,
	snPOSDescr
		DisplayString,
	snPOSName
		DisplayString,
	snPOSInfoSpeed
		INTEGER,
	snPOSInfoAdminStatus
		INTEGER,
	snPOSInfoLinkStatus
		INTEGER,
	snPOSInfoClock
		INTEGER,
	snPOSInfoLoopBack
		INTEGER,
	snPOSInfoScrambleATM
		POSStatus,
	snPOSInfoFraming
		INTEGER,
	snPOSInfoCRC
		INTEGER,
	snPOSInfoKeepAlive
		INTEGER,
	snPOSInfoFlagC2
		INTEGER,
	snPOSInfoFlagJ0
		INTEGER,
	snPOSInfoFlagH1
		INTEGER,
	snPOSStatsInFrames
		Counter,
	snPOSStatsOutFrames
		Counter,
	snPOSStatsAlignErrors
		Counter,
	snPOSStatsFCSErrors
		Counter,
	snPOSStatsFrameTooLongs              
		Counter,
	snPOSStatsFrameTooShorts
		Counter,
	snPOSStatsInDiscard
		Counter,
	snPOSStatsOutDiscard
		Counter,
	snPOSInOctets
		OCTET STRING,
	snPOSOutOctets
		OCTET STRING,
	snPOSStatsInBitsPerSec
		Gauge,
	snPOSStatsOutBitsPerSec
		Gauge,
	snPOSStatsInPktsPerSec
		Gauge,
	snPOSStatsOutPktsPerSec
		Gauge,
	snPOSStatsInUtilization
		INTEGER (0..10000),
	snPOSStatsOutUtilization
		INTEGER (0..10000),
	snPOSTagType
		INTEGER,
	snPOSStatsB1
		Counter,
	snPOSStatsB2
		Counter,
	snPOSStatsB3
		Counter,
	snPOSStatsAIS
		Counter,
	snPOSStatsRDI
		Counter,
	snPOSStatsLOP
		Counter,
	snPOSStatsLOF
		Counter,
	snPOSStatsLOS
		Counter
	}


snPOSInfoPortNum OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index.
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snPOSInfoEntry 1 }


snPOSIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"In order to identify a particular interface, this
		object shall identify the instance of the ifIndex
		object, defined in RFC 1213 and RFC 1573."
    ::= { snPOSInfoEntry 2 }


snPOSDescr OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"A textual string containing the slot/port information
    	about the interface."
    ::= { snPOSInfoEntry 3 }


snPOSName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..255))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Port Name string."
	::= { snPOSInfoEntry 4 }

snPOSInfoSpeed OBJECT-TYPE
	SYNTAX  INTEGER {
		s155000(1),
		s622000(2),
		other(3),
		s2488000(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION     
		"The speed configuration for a port. The values are:
		155000
		622000
		2488000
		"
	::= { snPOSInfoEntry 5 }


snPOSInfoAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"The desired state of all ports.  The
	 	testing(3) state indicates that no operational
	 	packets can be passed. 
	 	(same as ifAdminStatus in MIB-II)"
    ::= { snPOSInfoEntry 6 }


snPOSInfoLinkStatus OBJECT-TYPE
    SYNTAX  INTEGER {
    	up(1),       -- ready to pass packets
    	down(2),
    	testing(3)   -- in some test mode
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational state of the interface.
         The testing(3) state indicates that no operational
         packets can be passed. 
         (same as ifOperStatus in MIB-II)"
    ::= { snPOSInfoEntry 7 }


snPOSInfoClock  OBJECT-TYPE
    SYNTAX  INTEGER {
    	internal(1),     
    	line(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"Clock default internal"
    ::= { snPOSInfoEntry 8 }

snPOSInfoLoopBack   OBJECT-TYPE
    SYNTAX  INTEGER {
    	line(1),     
    	internal(2),
    	none(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"Loop back default none"
    ::= { snPOSInfoEntry 9 }

snPOSInfoScrambleATM  OBJECT-TYPE
	SYNTAX	POSStatus
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"ATM style scrambling default off"
    ::= { snPOSInfoEntry 10 }

snPOSInfoFraming  OBJECT-TYPE
    SYNTAX  INTEGER {
    	sonet(1),     
    	sdh(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"Framing default SONET"
    ::= { snPOSInfoEntry 11 }

snPOSInfoCRC  OBJECT-TYPE
    SYNTAX  INTEGER {
    	crc32bits(1),     
    	crc16bits(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"CRC default 32 bit"
    ::= { snPOSInfoEntry 12 }

snPOSInfoKeepAlive  OBJECT-TYPE
	SYNTAX  INTEGER (0..32767)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"Keep-alive default 10"
    ::= { snPOSInfoEntry 13 }

snPOSInfoFlagC2  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"C2 flag"
    ::= { snPOSInfoEntry 14 }


snPOSInfoFlagJ0  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"J0 flag"
    ::= { snPOSInfoEntry 15 }

snPOSInfoFlagH1  OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"H1 flag"
    ::= { snPOSInfoEntry 16 }

snPOSStatsInFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of packets received on the interface."
    ::= { snPOSInfoEntry 17 }


snPOSStatsOutFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of packets transmitted out of the interface."
    ::= { snPOSInfoEntry 18 }


snPOSStatsAlignErrors   OBJECT-TYPE
     SYNTAX     Counter
     ACCESS     read-only
     STATUS     mandatory
     DESCRIPTION
	 	"dot3StatsAlignmentErrors : A count of frames 
	  	received on a particular interface that are 
	  	not an integral number of octets in length 
	  	and do not pass the FCS check.

	  	The count represented by an instance of this
	  	object is incremented when the alignmentError
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snPOSInfoEntry 19 }

snPOSStatsFCSErrors   OBJECT-TYPE
     SYNTAX      Counter
     ACCESS      read-only
     STATUS      mandatory
     DESCRIPTION
	 	"dot3StatsFCSErrors : A count of frames received 
	  	on a particular interface that are an integral 
	  	number of octets in length but do not pass the 
	  	FCS check.

	  	The count represented by an instance of this
	  	object is incremented when the frameCheckError
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snPOSInfoEntry 20 }


snPOSStatsFrameTooLongs   OBJECT-TYPE
     SYNTAX    Counter
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
	 	"dot3StatsFrameTooLongs : A count of frames 
	  	received on a particular interface that 
	  	exceed the maximum permitted frame size.

	  	The count represented by an instance of this
	  	object is incremented when the frameTooLong
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snPOSInfoEntry 21 }


snPOSStatsFrameTooShorts   OBJECT-TYPE
     SYNTAX    Counter
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
	 	" A count of frames received on a particular 
	 	interface that below the minimum permitted 
	 	frame size."
    ::= { snPOSInfoEntry 22 }

snPOSStatsInDiscard OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of inbound packets which were chosen
         to be discarded even though no errors had been
         detected to prevent their being deliverable to a
         higher-layer protocol.  One possible reason for
         discarding such a packet could be to free up
         buffer space."
    ::= { snPOSInfoEntry 23 }


snPOSStatsOutDiscard OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of outbound packets which were chosen
         to be discarded even though no errors had been
         detected to prevent their being transmitted.  One
         possible reason for discarding such a packet could
         be to free up buffer space."
    ::= { snPOSInfoEntry 24 }

snPOSInOctets OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(8))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of octets received on the interface,
    	including framing characters. This object is a 64-bit
		counter of the ifInOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
    ::= { snPOSInfoEntry 25 }


snPOSOutOctets OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(8))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of octets transmitted out of the interface,
    	including framing characters. This object is a 64-bit
		counter of the ifOutOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
    ::= { snPOSInfoEntry 26 }


snPOSStatsInBitsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of bits per second received on the interface
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 27 }


snPOSStatsOutBitsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of bits per second transmitted out of the interface
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 28 }


snPOSStatsInPktsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of packets per second received on the interface
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 29 }


snPOSStatsOutPktsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of packets per second transmitted out of the interface
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 30 }


snPOSStatsInUtilization OBJECT-TYPE
    SYNTAX  INTEGER (0..10000)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The input network utilization in hundredths of a percent
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 31 }


snPOSStatsOutUtilization OBJECT-TYPE
    SYNTAX  INTEGER (0..10000)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The output network utilization in hundredths of a percent
    	over a 5 minutes interval."
    ::= { snPOSInfoEntry 32 }

snPOSTagType OBJECT-TYPE
	SYNTAX  INTEGER {
		tagged(1),      
		untagged(2)    
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"For tagged port, we could have multiple VLANs 
		 per port."  
	::= {snPOSInfoEntry  33}

snPOSStatsB1 OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Section error monitoring."
    ::= { snPOSInfoEntry 34 }

snPOSStatsB2 OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Line error monitoring."
    ::= { snPOSInfoEntry 35 }

snPOSStatsB3 OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Path error monitoring."
    ::= { snPOSInfoEntry 36 }

snPOSStatsAIS OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Alarm indication signal."
    ::= { snPOSInfoEntry 37 }

snPOSStatsRDI OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Remote defect indication."
    ::= { snPOSInfoEntry 38 }

snPOSStatsLOP OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Loss of pointer."
    ::= { snPOSInfoEntry 39 }

snPOSStatsLOF OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Loss of frame."
    ::= { snPOSInfoEntry 40 }

snPOSStatsLOS OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Loss of signal."
    ::= { snPOSInfoEntry 41 }

END