-- **************************************************************************** -- COLUBRIS-WDS-MIB definitions -- -- Copyright (c) 2006, Colubris Networks, Inc. -- All Rights Reserved. -- -- Colubris WDS MIB file. -- -- **************************************************************************** COLUBRIS-WDS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, MacAddress, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF colubrisMgmtV2 FROM COLUBRIS-SMI ; colubrisWdsMIB MODULE-IDENTITY LAST-UPDATED "200801040000Z" ORGANIZATION "Colubris Networks, Inc." CONTACT-INFO "Colubris Networks Postal: 200 West Street Ste 300 Waltham, Massachusetts 02451-1121 UNITED STATES Phone: +1 781 684 0001 Fax: +1 781 684 0009 E-mail: cn-snmp@colubris.com" DESCRIPTION "Colubris WDS MIB." ::= { colubrisMgmtV2 33 } -- colubrisWdsMIB definition colubrisWdsMIBObjects OBJECT IDENTIFIER ::= { colubrisWdsMIB 1 } -- colubris WDS groups coWDSInfoGroup OBJECT IDENTIFIER ::= { colubrisWdsMIBObjects 1 } coWDSRadioGroup OBJECT IDENTIFIER ::= { colubrisWdsMIBObjects 2 } coWDSGroupGroup OBJECT IDENTIFIER ::= { colubrisWdsMIBObjects 3 } coWDSLinkGroup OBJECT IDENTIFIER ::= { colubrisWdsMIBObjects 4 } coWDSNetworkScanGroup OBJECT IDENTIFIER ::= { colubrisWdsMIBObjects 5 } coWDSNumberOfGroup OBJECT-TYPE SYNTAX Unsigned32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of WDS groups supported by the product." ::= { coWDSInfoGroup 1 } coWDSDynamicModeImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if dynamic WDS mode is available in the product." ::= { coWDSInfoGroup 2 } coWDSRadioTable OBJECT-TYPE SYNTAX SEQUENCE OF CoWDSRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the ACK distance parameter." ::= { coWDSRadioGroup 1 } coWDSRadioEntry OBJECT-TYPE SYNTAX CoWDSRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the ACK distance Table. coWDSRadioIndex - Radio number where the ACK distance is applied." INDEX { coWDSRadioIndex } ::= { coWDSRadioTable 1 } CoWDSRadioEntry ::= SEQUENCE { coWDSRadioIndex Integer32, coWDSRadioAckDistance Unsigned32, coWDSRadioQoS INTEGER } coWDSRadioIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio number." ::= { coWDSRadioEntry 1 } coWDSRadioAckDistance OBJECT-TYPE SYNTAX Unsigned32 UNITS "km" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum distance between the device and the remote peers." ::= { coWDSRadioEntry 2 } coWDSRadioQoS OBJECT-TYPE SYNTAX INTEGER { disabled(1), vlan(2), veryHigh(3), high(4), normal(5), low(6), diffSrv(7), tos(8), ipQos(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "QoS priority mechanism used to maps the traffic to one of the four WMM traffic queues." ::= { coWDSRadioEntry 3 } coWDSGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CoWDSGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the WDS Groups. This table contains the six WDS Groups configuration information." ::= { coWDSGroupGroup 1 } coWDSGroupEntry OBJECT-TYPE SYNTAX CoWDSGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WDS Group Table. coWDSGroupIndex - Uniquely identify a WDS group inside the WDS group table." INDEX { coWDSGroupIndex } ::= { coWDSGroupTable 1 } CoWDSGroupEntry ::= SEQUENCE { coWDSGroupIndex Integer32, coWDSGroupName DisplayString, coWDSGroupState INTEGER, coWDSGroupSecurity INTEGER, coWDSGroupAddressing INTEGER, coWDSGroupStaticMacAddress MacAddress, coWDSGroupDynamicMode INTEGER, coWDSGroupDynamicGroupId Unsigned32 } coWDSGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of WDS groups." ::= { coWDSGroupEntry 1 } coWDSGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Friendly name of the WDS group." ::= { coWDSGroupEntry 2 } coWDSGroupState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies if the WDS group is active in the radios." ::= { coWDSGroupEntry 3 } coWDSGroupSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), wep(2), tkip(3), aes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the encryption used by the WDS group." ::= { coWDSGroupEntry 4 } coWDSGroupAddressing OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies if the WDS group is static or dynamic." ::= { coWDSGroupEntry 5 } coWDSGroupStaticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "For static WDS group, this object specify the MAC address of the remote WDS device." ::= { coWDSGroupEntry 6 } coWDSGroupDynamicMode OBJECT-TYPE SYNTAX INTEGER { none(0), master(1), slave(2), alternateMaster(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the mode of the dynamic WDS group." ::= { coWDSGroupEntry 7 } coWDSGroupDynamicGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the group identifier of the dynamic WDS group." ::= { coWDSGroupEntry 8 } coWDSLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF CoWDSLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the WDS links. This table contains up to 54 WDS links status information." ::= { coWDSLinkGroup 1 } coWDSLinkEntry OBJECT-TYPE SYNTAX CoWDSLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WDS Link Table. coWDSGroupIndex - Uniquely identify a WDS group inside the WDS group table. coWDSLinkIndex - Uniquely identify a WDS link inside a WDS group." INDEX { coWDSGroupIndex, coWDSLinkIndex } ::= { coWDSLinkTable 1 } CoWDSLinkEntry ::= SEQUENCE { coWDSLinkIndex Integer32, coWDSLinkState INTEGER, coWDSLinkRadio Integer32, coWDSLinkPeerMacAddress MacAddress, coWDSLinkMaster TruthValue, coWDSLinkAuthorized TruthValue, coWDSLinkEncryption INTEGER, coWDSLinkIdleTime Unsigned32, coWDSLinkSNR Integer32, coWDSLinkTxRate Unsigned32, coWDSLinkRxRate Unsigned32, coWDSLinkIfIndex Integer32, coWDSLinkHT TruthValue, coWDSLinkTxMCS Unsigned32, coWDSLinkRxMCS Unsigned32, coWDSLinkSignal Integer32, coWDSLinkNoise Integer32 } coWDSLinkIndex OBJECT-TYPE SYNTAX Integer32 (1..54) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of WDS links." ::= { coWDSLinkEntry 1 } coWDSLinkState OBJECT-TYPE SYNTAX INTEGER { down(1), acquiring(2), inactive(3), active(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the state of the WDS link." ::= { coWDSLinkEntry 2 } coWDSLinkRadio OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio number where the WDS peer was detected." ::= { coWDSLinkEntry 3 } coWDSLinkPeerMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the WDS peer." ::= { coWDSLinkEntry 4 } coWDSLinkMaster OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Determine if this link is a link to a master. Providing upstream network access." ::= { coWDSLinkEntry 5 } coWDSLinkAuthorized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption, if any, can proceed." ::= { coWDSLinkEntry 6 } coWDSLinkEncryption OBJECT-TYPE SYNTAX INTEGER { none(1), wep(2), tkip(3), aes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the encryption used by the WDS link." ::= { coWDSLinkEntry 7 } coWDSLinkIdleTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Inactivity time." ::= { coWDSLinkEntry 8 } coWDSLinkSNR OBJECT-TYPE SYNTAX Integer32 (0..92) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal noise ratio of the WDS peer." ::= { coWDSLinkEntry 9 } coWDSLinkTxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "500Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit rate of the WDS peer." ::= { coWDSLinkEntry 10 } coWDSLinkRxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "500Kb/s" MAX-ACCESS read-only STATUS current DESCRIPTION "Current receive rate of the WDS peer." ::= { coWDSLinkEntry 11 } coWDSLinkIfIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "ifIndex of the associated interface in the ifTable." ::= { coWDSLinkEntry 12 } coWDSLinkHT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the link is using high throughput data rates." ::= { coWDSLinkEntry 13 } coWDSLinkTxMCS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit MCS of the HT WDS peer." ::= { coWDSLinkEntry 14 } coWDSLinkRxMCS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current receive MCS of the HT WDS peer." ::= { coWDSLinkEntry 15 } coWDSLinkSignal OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Strength of the wireless signal." ::= { coWDSLinkEntry 16 } coWDSLinkNoise OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Level of local background noise." ::= { coWDSLinkEntry 17 } coWDSNetworkScanTable OBJECT-TYPE SYNTAX SEQUENCE OF CoWDSNetworkScanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for the WDS network scans." ::= { coWDSNetworkScanGroup 1 } coWDSNetworkScanEntry OBJECT-TYPE SYNTAX CoWDSNetworkScanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the WDS Network Scan Table. coWDSScanRadioIndex - Radio number where the WDS peer was detected. coWDSScanPeerIndex - Uniquely identify a WDS peer on a radio inside the WDS network scan table." INDEX { coWDSScanRadioIndex, coWDSScanPeerIndex } ::= { coWDSNetworkScanTable 1 } CoWDSNetworkScanEntry ::= SEQUENCE { coWDSScanRadioIndex Integer32, coWDSScanPeerIndex Integer32, coWDSScanGroupId Unsigned32, coWDSScanPeerMacAddress MacAddress, coWDSScanChannel Unsigned32, coWDSScanSNR Integer32, coWDSScanMode INTEGER, coWDSScanAvailable TruthValue } coWDSScanRadioIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio number where the WDS peer was detected." ::= { coWDSNetworkScanEntry 1 } coWDSScanPeerIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identify a WDS peer on a radio." ::= { coWDSNetworkScanEntry 2 } coWDSScanGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group id used by the WDS peer." ::= { coWDSNetworkScanEntry 3 } coWDSScanPeerMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the WDS peer." ::= { coWDSNetworkScanEntry 4 } coWDSScanChannel OBJECT-TYPE SYNTAX Unsigned32 (1..199) MAX-ACCESS read-only STATUS current DESCRIPTION "Channel on which the peer is transmitting." ::= { coWDSNetworkScanEntry 5 } coWDSScanSNR OBJECT-TYPE SYNTAX Integer32 (0..92) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal noise ratio of the WDS peer." ::= { coWDSNetworkScanEntry 6 } coWDSScanMode OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2), alternateMaster(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current mode of the WDS peer." ::= { coWDSNetworkScanEntry 7 } coWDSScanAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Peer is accepting connections." ::= { coWDSNetworkScanEntry 8 } -- conformance information colubrisWdsMIBConformance OBJECT IDENTIFIER ::= { colubrisWdsMIB 2 } colubrisWdsMIBCompliances OBJECT IDENTIFIER ::= { colubrisWdsMIBConformance 1 } colubrisWdsMIBGroups OBJECT IDENTIFIER ::= { colubrisWdsMIBConformance 2 } -- compliance statements colubrisWdsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the WDS MIB." MODULE MANDATORY-GROUPS { colubrisWDSInfoMIBGroup, colubrisWDSRadioMIBGroup, colubrisWDSGroupMIBGroup, colubrisWDSLinkMIBGroup, colubrisWDSScanMIBGroup } ::= { colubrisWdsMIBCompliances 1 } -- units of conformance colubrisWDSInfoMIBGroup OBJECT-GROUP OBJECTS { coWDSNumberOfGroup, coWDSDynamicModeImplemented } STATUS current DESCRIPTION "A collection of scalar objects for WDS." ::= { colubrisWdsMIBGroups 1 } colubrisWDSRadioMIBGroup OBJECT-GROUP OBJECTS { coWDSRadioAckDistance, coWDSRadioQoS } STATUS current DESCRIPTION "A collection of objects for the WDS radios." ::= { colubrisWdsMIBGroups 2 } colubrisWDSGroupMIBGroup OBJECT-GROUP OBJECTS { coWDSGroupName, coWDSGroupState, coWDSGroupSecurity, coWDSGroupAddressing, coWDSGroupStaticMacAddress, coWDSGroupDynamicMode, coWDSGroupDynamicGroupId } STATUS current DESCRIPTION "A collection of objects for the WDS groups." ::= { colubrisWdsMIBGroups 3 } colubrisWDSLinkMIBGroup OBJECT-GROUP OBJECTS { coWDSLinkState, coWDSLinkRadio, coWDSLinkPeerMacAddress, coWDSLinkMaster, coWDSLinkAuthorized, coWDSLinkEncryption, coWDSLinkIdleTime, coWDSLinkSNR, coWDSLinkTxRate, coWDSLinkRxRate, coWDSLinkIfIndex, coWDSLinkHT, coWDSLinkTxMCS, coWDSLinkRxMCS, coWDSLinkSignal, coWDSLinkNoise } STATUS current DESCRIPTION "A collection of objects for the WDS links." ::= { colubrisWdsMIBGroups 4 } colubrisWDSScanMIBGroup OBJECT-GROUP OBJECTS { coWDSScanGroupId, coWDSScanPeerMacAddress, coWDSScanChannel, coWDSScanSNR, coWDSScanMode, coWDSScanAvailable } STATUS current DESCRIPTION "A collection of objects for the WDS network scan." ::= { colubrisWdsMIBGroups 5 } END