-- ================================================================== -- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Private Extended Interface MIB -- Reference: -- Version: V3.01 -- History: -- V1.0 -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-IF-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS CounterBasedGauge64 FROM HCNUM-TC hwDatacomm FROM HUAWEI-MIB ifIndex, ifName, InterfaceIndex,InterfaceIndexOrZero,ifAdminStatus,ifOperStatus,ifDescr FROM IF-MIB VlanIdOrNone, PortList FROM Q-BRIDGE-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, Unsigned32, Counter64, OBJECT-TYPE, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI sysUpTime FROM SNMPv2-MIB RowStatus, TruthValue, DisplayString,PhysAddress,TEXTUAL-CONVENTION,TimeStamp FROM SNMPv2-TC AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB ipAdEntNetMask FROM IP-MIB InetVersion FROM INET-ADDRESS-MIB; hwIFExtMib MODULE-IDENTITY LAST-UPDATED "201901090000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "V3.01 add hwTrunkMemberChange" REVISION "201901090000Z" DESCRIPTION "V3.00 Add hwTrunkIfStatus." REVISION "201901070000Z" DESCRIPTION "V2.99 Modify hwLogicIfTable hwLogicIfParaOne, add l2subif." REVISION "201808170000Z" DESCRIPTION "V2.98 Add hwModeChannelBandwidth." REVISION "201806130000Z" DESCRIPTION "V2.97 Add hwLacpPartnerMisconnect and hwLacpPartnerMisconnectResume." REVISION "201806060000Z" DESCRIPTION "V2.96 Modify hwLogicIfTable hwLogicIfType, add gmplsUni." REVISION "201802070000Z" DESCRIPTION "V2.94 Modify hwPhysicalAdminIfDown and hwPhysicalAdminIfUp." REVISION "201802070000Z" DESCRIPTION "V2.93 add hwPhysicalAdminIfDown and hwPhysicalAdminIfUp." REVISION "201801260000Z" DESCRIPTION "V2.92 Modify subchannelThreshold, add subchannelThreshold kinds" REVISION "201801250000Z" DESCRIPTION "V2.91 Modify hwLogicIfType, add virtualserial,pwve, subPwVe, vbdif" REVISION "201801190000Z" DESCRIPTION "V2.90 Modify description." REVISION "201801150000Z" DESCRIPTION "V2.89 Modify hwCppsPortPvcEnable and hwCppsPortVlanEnable DEFVAL." REVISION "201712200000Z" DESCRIPTION "V2.88 add hwIFExtDualFlowRateTable." REVISION "201711280000Z" DESCRIPTION "V2.87consistent with code base." REVISION "201711140000Z" DESCRIPTION "V2.86 mode channel sub-interface." REVISION "201711060000Z" DESCRIPTION "V2.85 delete linkDown linkUp ipv6IfStateChange ipv6NotificationGroup." REVISION "201710280000Z" DESCRIPTION "V2.84 Modify the description of hwIfDualStackStatsTable." REVISION "201710250000Z" DESCRIPTION "V2.83 add hwIfIpStatisticsTable." REVISION "201710120000Z" DESCRIPTION "V2.82 add hwIfDualStackStatsTable." REVISION "201709240000Z" DESCRIPTION "V2.81 add ipv6IfStateChange." REVISION "201709140000Z" DESCRIPTION "V2.80 add PostFecAlarm and PostFecAlarmResume NOTIFICATION-TYPE." REVISION "201708290000Z" DESCRIPTION "V2.79 add linkDown and linkUp NOTIFICATION-TYPE." REVISION "201708180000Z" DESCRIPTION "V2.78 Modify the description of hwRemoteIfTable." REVISION "201708170000Z" DESCRIPTION "V2.77 add hwTrunkAllMemUpNotify." REVISION "201707270000Z" DESCRIPTION "V2.76 update the DESCRIPTION of hwIfEtherStatTable,hwIfSdhStatTable,hwIfAtmStatTable,hwIfPPPHDLCStatTable." REVISION "201707240000Z" DESCRIPTION "V2.75 add hwLicenseEffectServiceAlarm, hwLicenseEffectServiceResume." REVISION "201703290000Z" DESCRIPTION "V2.74 add hwRemoteIfTable." REVISION "201703160000Z" DESCRIPTION "V2.73 add hwIFExtInputPkts,hwIFExtOutputPkts,hwIFExtInputUnicastBitRate,hwIFExtOutputUnicastBitRate,hwIFExtInputMulticastBitRate,hwIFExtOutputMulticastBitRate,hwIFExtInputBroadcastBitRate,hwIFExtOutputBroadcastBitRate, hwIFExtInputUnicastPktRate,hwIFExtOutputUnicastPktRate,hwIFExtInputMulticastPktRate,hwIFExtOutputMulticastPktRate,hwIFExtInputBroadcastPktRate,hwIFExtOutputBroadcastPktRate." REVISION "201701240000Z" DESCRIPTION "V2.72 rollback hwRemoteIfTable." REVISION "201701240000Z" DESCRIPTION "V2.71 add hwRemoteIfTable." REVISION "201701190000Z" DESCRIPTION "V2.70 add hwMruDiscardStatisticAttr." REVISION "201612280000Z" DESCRIPTION "V2.69 Update the hwLinkDownReason, add from cfmSessionDown to cfmSessionUp." REVISION "201610100000Z" DESCRIPTION "V2.57 Modify hwIfEtherStatInPkts64Octets hwIfEtherStatInPkts65to127Octets hwIfEtherStatInPkts128to255Octets hwIfEtherStatInPkts256to511Octets hwIfEtherStatInPkts512to1023Octets hwIfEtherStatInPkts1024to1518Octets DESCRIPTION" REVISION "201609271000Z" DESCRIPTION "V2.68 modify hwIfDiffServMode range." REVISION "201609232026Z" DESCRIPTION "V2.64 add hwLagMemberDown and hwLagMemberDownResume." REVISION "201608062026Z" DESCRIPTION "V2.66 change hwIfMonitorAllStatistics" REVISION "201605210000Z" DESCRIPTION "V2.65 add hwIfMonitorAllStatistics" REVISION "201512230000Z" DESCRIPTION "V2.63 add hwTrunkSubinterfacesCount and hwTrunkSubinterfacesLimit." REVISION "201512080000Z" DESCRIPTION "V2.62 (1) add hwIfMonitorTxPauseFrameStatistics, hwIfMonitorTxPauseFrameHighThreshold, hwIfMonitorTxPauseFrameLowThreshold, hwIfMonitorTxPauseFrameInterval, hwIfMonitorTxPauseFrameRising, hwIfMonitorTxPauseFrameRisingResume; (2) modify spelling mistake (recieved to received) in description." REVISION "201509060000Z" DESCRIPTION "V2.61 Update hwLogicIfType, add object-type lmpif(31),update hwLoopbackBlock, change OBJECTS { ifDescr, hwNewIfTimeslot }." REVISION "201508060000Z" DESCRIPTION "V2.60 Update the hwLinkDownReason, add from linkHearBeatDown to triggerDown." REVISION "201506290000Z" DESCRIPTION "V2.59 Add Eth/Pos/Serial(PPP/HDLC) Statistic " REVISION "201505140000Z" DESCRIPTION "V2.58 Modify hwIFExtSwitchPortIndex SYNTAX" REVISION "201503272026Z" DESCRIPTION "V2.57 Modify hwIfMonitorCrcErrorThreshold hwIfMonitorSdhErrorThreshold hwIfMonitorPauseFrameThreshold hwIfMonitorSymbolErrorThreshold SYNTAX" REVISION "201503262026Z" DESCRIPTION "V2.56 hwLogicIfType add nve, vt, fcoe." REVISION "201502032026Z" DESCRIPTION "Some attribute of interface extended content, information of interface IP, interface of trunk interface." REVISION "201501052026Z" DESCRIPTION "V2.55 hwIfMonitorBadBytesErrorRising hwIfMonitorPauseFrameRising add hwIfMonitorName." REVISION "201412252026Z" DESCRIPTION "V2.54 add hwIFExtSuppressStatusIPv6 hwIfControlFlapSuppressIPv6 hwIfControlFlapResumeIPv6." REVISION "201411052026Z" DESCRIPTION "V2.53 add hwExtTrunkWorkingStatusChange." REVISION "201409102026Z" DESCRIPTION "V2.52 Update hwTrunkIfModel, add object-type l4(20)." REVISION "201408132026Z" DESCRIPTION "V2.51 add hwTrunkMemberCountUpperThreshold hwTrunkMemberCountLowerThreshold hwExtTrunkMemberCountExceedThreshold hwExtTrunkMemberCountExceedThresholdResume range." REVISION "201408062026Z" DESCRIPTION "V2.50 modify hwIfDiffServMode range." REVISION "201406092026Z" DESCRIPTION "Modify hwTrunkMemCount." REVISION "201406062026Z" DESCRIPTION "Add hwTrunkMemCount and hwTrunkCount." REVISION "201403252026Z" DESCRIPTION "Add hwIfEfmDown and hwIfEfmUp." REVISION "201403061626Z" DESCRIPTION "Add hwLacpPDUChange and hwLacpPDUChangeResume." REVISION "201403030939Z" DESCRIPTION "modify hwIpv6IfChangeDownReason ." REVISION "201402111900Z" DESCRIPTION "Modify description" REVISION "201402101900Z" DESCRIPTION "Update hwTrunkIfWorkingMode, add object-type port-standbyMode(5)." REVISION "201402071900Z" DESCRIPTION "add hwIfIpAddrTable" REVISION "201401261900Z" DESCRIPTION "Update hwTrunkSelectStatus, add trunkIndep(3)." REVISION "201401181200Z" DESCRIPTION "Update hwLogicIfType , add object-type globalVe(26), subGlobalVe(27)." REVISION "201401161900Z" DESCRIPTION "Update hwTrunkIfWorkingMode, modify object-type lacpStaticMode(3) to lacpMode(3) and add object-type lacpCompatibleMode(4)." REVISION "201401131600Z" DESCRIPTION "Update hwTrunkIfWorkingMode, modify object-type lacpMode(3) to lacpStaticMode(3); Update hwLogicIfType, add object-type subPosFr(25)." REVISION "201309051400Z" DESCRIPTION "Add hwLacpPartnerExpiredLoss." REVISION "201307021400Z" DESCRIPTION "Add hwTrunkMapTable and hwIFExtSwitchPortIndex." REVISION "201306081830Z" DESCRIPTION "Update the hwLinkDownReason, add from veFlowDown to negotiationUnsupported." REVISION "201306051100Z" DESCRIPTION "Update the hwLogicIfType, add globalImaGroup and subGlobalImaGroup." REVISION "201305212000Z" DESCRIPTION "Update the hwLogicIfType, add remoteAp, vBridge,atmBundle and mtunnel." REVISION "201301220000Z" DESCRIPTION "V2.30, modify hwVTrunkIfID range." ::= { hwDatacomm 41 } -- -- Textual conventions -- -- Textual Convention EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } SnmpPasswdString ::= TEXTUAL-CONVENTION DISPLAY-HINT "16a" STATUS current DESCRIPTION "The password string" SYNTAX OCTET STRING (SIZE (0..16)) HWDirectionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Direction Flux Limit apply on." SYNTAX INTEGER { inbound(1), outbound(2) } -- ============================================================================ -- interface IP address group -- ============================================================================ HwIpAddressType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of IP address." SYNTAX INTEGER { primary(1), sub(2) } -- -- Node definitions -- hwIFExtObjects OBJECT IDENTIFIER ::= { hwIFExtMib 1 } -- ==================================================================== -- basic interface extended definition group -- ==================================================================== hwIFExtBase OBJECT IDENTIFIER ::= { hwIFExtObjects 1 } -- =========================================================================== -- interface extended group -- ============================================================================ hwIFExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIFExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface extended table of private mib." ::= { hwIFExtBase 1 } hwIFExtEntry OBJECT-TYPE SYNTAX HwIFExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private extended interface table." INDEX { hwIFExtIndex } ::= { hwIFExtTable 1 } HwIFExtEntry ::= SEQUENCE { hwIFExtIndex InterfaceIndex, hwIFExtLayer INTEGER, hwIFExtFrameType INTEGER, hwIFExtFlowStatInterval Integer32, hwIFExtFlushReceiveEnable EnabledStatus, hwIFExtFlushVlanId VlanIdOrNone, hwIFExtFlushPasswd SnmpPasswdString, hwIFExtFlowStatus INTEGER, hwIFExtMtu Integer32, hwIFExtMacAddr PhysAddress, hwIFExtBlockPriority Integer32, hwIFExtMacShift INTEGER, hwIFExtSuppressStatus INTEGER, hwIFExtPoisonReverse EnabledStatus, hwIFExtInputPktRate Gauge32, hwIFExtInputHighPktRate Gauge32, hwIFExtOutputPktRate Gauge32, hwIFExtOutputHighPktRate Gauge32, hwIFExtInputOctetRate Gauge32, hwIFExtInputHighOctetRate Gauge32, hwIFExtOutputOctetRate Gauge32, hwIFExtOutputHighOctetRate Gauge32, hwIFExtSwitchPortIndex Integer32, hwIFExtSuppressStatusIPv6 INTEGER, hwIFExtInputPkts Counter64, hwIFExtOutputPkts Counter64, hwIFExtInputUnicastBitRate CounterBasedGauge64, hwIFExtOutputUnicastBitRate CounterBasedGauge64, hwIFExtInputMulticastBitRate CounterBasedGauge64, hwIFExtOutputMulticastBitRate CounterBasedGauge64, hwIFExtInputBroadcastBitRate CounterBasedGauge64, hwIFExtOutputBroadcastBitRate CounterBasedGauge64, hwIFExtInputUnicastPktRate CounterBasedGauge64, hwIFExtOutputUnicastPktRate CounterBasedGauge64, hwIFExtInputMulticastPktRate CounterBasedGauge64, hwIFExtOutputMulticastPktRate CounterBasedGauge64, hwIFExtInputBroadcastPktRate CounterBasedGauge64, hwIFExtOutputBroadcastPktRate CounterBasedGauge64 } hwIFExtIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of extended table of interface." ::= { hwIFExtEntry 1 } hwIFExtLayer OBJECT-TYPE SYNTAX INTEGER { layer2(1), layer3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Switch the port between Layer3 and Layer2. Corresponding to the port switch command.Layer2(1) is 1 when the port switch from layer3 to layer2.Layer3(1) is 1 when the port switch from lyaer2 to layer3." ::= { hwIFExtEntry 2 } hwIFExtFrameType OBJECT-TYPE SYNTAX INTEGER { ethernetII(1), ethernetSnap(2), ethernet8022(3), ethernet8023(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Frame type is accepted by VLAN virtual interfaces.Frame format contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023. The type location setting 1 when the ethernetII(1) type is accepted.Now only surpport the first(ethernetII(1))" ::= { hwIFExtEntry 3 } -- metric: second hwIFExtFlowStatInterval OBJECT-TYPE SYNTAX Integer32 (10..600) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the interval for collecting the statistics of the interface traffic. The value ranges from 10 to 600, in seconds. The default interval is 300s.If intervals for collecting traffic statistics are configured both in the interface view and globally, the configuration in the interface view takes effect.If no interval for collecting traffic statistics is configured in the interface view, the global configuration takes effect.The real-time traffic statistics collection rate is affected by the interval for collecting traffic statistics." DEFVAL { 300 } ::= { hwIFExtEntry 4 } hwIFExtFlushReceiveEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not permit the port to take over FLUSHDUs. Once it is enabled, the port will take over SmartLink FlushDUs from related vlans so as to delete the MAC forwarding table in the local equipment." DEFVAL { disabled } ::= { hwIFExtEntry 5 } hwIFExtFlushVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled." DEFVAL { 0 } ::= { hwIFExtEntry 6 } hwIFExtFlushPasswd OBJECT-TYPE SYNTAX SnmpPasswdString MAX-ACCESS read-write STATUS current DESCRIPTION "A 16-octet read-write value used to define the password for negotiation." DEFVAL { '00'h } ::= { hwIFExtEntry 7 } hwIFExtFlowStatus OBJECT-TYPE SYNTAX INTEGER { flowUp(1), flowDown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Current flow status of interface. 1:flow up 2:flow down" ::= { hwIFExtEntry 8 } hwIFExtMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the MTU of an interface. The MTU value varies according to different interfaces. The default MTU value also varies. The MTU value can be modified." ::= { hwIFExtEntry 9 } hwIFExtMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address of the interface ." ::= { hwIFExtEntry 10 } hwIFExtBlockPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The blocked priority of the interface." ::= { hwIFExtEntry 11 } hwIFExtMacShift OBJECT-TYPE SYNTAX INTEGER { normal(1), macShift(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mac-shift state of the interface. 1:normal 2:monitor mac-shift" ::= { hwIFExtEntry 12 } hwIFExtSuppressStatus OBJECT-TYPE SYNTAX INTEGER { unsuppress(0), suppress(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The suppress state of the interface. 0:unsuppress 1:suppress" ::= { hwIFExtEntry 13 } hwIFExtPoisonReverse OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not enable Split-horizon forwarding " DEFVAL { disabled } ::= { hwIFExtEntry 14 } hwIFExtInputPktRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits. " ::= { hwIFExtEntry 15 } hwIFExtInputHighPktRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming packets on an interface. The rate value is 64 bits. hwIFExtInputPktRate indicates the lower 32 bits, while hwIFExtInputHighPktRate indicates the higher 32 bits. " ::= { hwIFExtEntry 16 } hwIFExtOutputPktRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits. " ::= { hwIFExtEntry 17 } hwIFExtOutputHighPktRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing packets on an interface. The rate value is 64 bits. hwIFExtOutputPktRate indicates the lower 32 bits, while hwIFExtOutputHighPktRate indicates the higher 32 bits. " ::= { hwIFExtEntry 18 } hwIFExtInputOctetRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits. " ::= { hwIFExtEntry 19 } hwIFExtInputHighOctetRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the incoming traffic on an interface. The rate value is 64 bits. hwIFExtInputOctetRate indicates the lower 32 bits, while hwIFExtInputHighOctetRate indicates the higher 32 bits." ::= { hwIFExtEntry 20 } hwIFExtOutputOctetRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bits. " ::= { hwIFExtEntry 21 } hwIFExtOutputHighOctetRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the outgoing traffic on an interface. The rate value is 64 bits. hwIFExtOutputOctetRate indicates the lower 32 bits, while hwIFExtOutputHighOctetRate indicates the higher 32 bits. " ::= { hwIFExtEntry 22 } hwIFExtSwitchPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of layer2 interface port, a unique value, for each port.It is recommended that values are assigned contiguously starting from 1. If the return value is -1, this interface is not a Layer 2 interface." ::= { hwIFExtEntry 23 } hwIFExtSuppressStatusIPv6 OBJECT-TYPE SYNTAX INTEGER { unsuppress(0), suppress(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The suppress state of the interface(IPv6). 0:unsuppress 1:suppress" ::= { hwIFExtEntry 24 } hwIFExtInputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface. The counter value is 64 bits. " ::= { hwIFExtEntry 25 } hwIFExtOutputPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface. The counter value is 64 bits. " ::= { hwIFExtEntry 26 } hwIFExtInputUnicastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the incoming unicast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 27 } hwIFExtOutputUnicastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the outgoing unicast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 28 } hwIFExtInputMulticastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the incoming multicast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 29 } hwIFExtOutputMulticastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the outgoing multicast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 30 } hwIFExtInputBroadcastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the incoming broadcast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 31 } hwIFExtOutputBroadcastBitRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the bit rate of the outgoing broadcast traffic on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 32 } hwIFExtInputUnicastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming unicast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 33 } hwIFExtOutputUnicastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing unicast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 34 } hwIFExtInputMulticastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming multicast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 35 } hwIFExtOutputMulticastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing multicast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 36 } hwIFExtInputBroadcastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming broadcast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 37 } hwIFExtOutputBroadcastPktRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing broadcast packets on an interface. The rate value is 64 bits. " ::= { hwIFExtEntry 38 } hwIFExtPhyStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The physical status of member interface." ::= { hwIFExtBase 2 } hwIFExtMemberOf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The description of the main interface which has the membership with the member interface." ::= { hwIFExtBase 3 } hwLinkModeChangeAutoCreateIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLinkModeChangeAutoCreateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface extended table of private mib." ::= { hwIFExtBase 4 } hwLinkModeChangeAutoCreateIfEntry OBJECT-TYPE SYNTAX HwLinkModeChangeAutoCreateIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private extended interface table." INDEX { hwAutoIfIndex } ::= { hwLinkModeChangeAutoCreateIfTable 1 } HwLinkModeChangeAutoCreateIfEntry ::= SEQUENCE { hwAutoIfIndex InterfaceIndex, hwNewIfTimeslot BITS } hwAutoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of extended table of interface." ::= { hwLinkModeChangeAutoCreateIfEntry 1 } hwNewIfTimeslot OBJECT-TYPE SYNTAX BITS{ timeslot0(0), timeslot1(1), timeslot2(2), timeslot3(3), timeslot4(4), timeslot5(5), timeslot6(6), timeslot7(7), timeslot8(8), timeslot9(9), timeslot10(10), timeslot11(11), timeslot12(12), timeslot13(13), timeslot14(14), timeslot15(15), timeslot16(16), timeslot17(17), timeslot18(18), timeslot19(19), timeslot20(20), timeslot21(21), timeslot22(22), timeslot23(23), timeslot24(24), timeslot25(25), timeslot26(26), timeslot27(27), timeslot28(28), timeslot29(29), timeslot30(30), timeslot31(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The time slot of the TDM interface: timeslot0(0):The time slot 0 on the TDM interface, timeslot1(1):The time slot 1 on the TDM interface, timeslot2(2):The time slot 2 on the TDM interface, timeslot3(3):The time slot 3 on the TDM interface, timeslot4(4):The time slot 4 on the TDM interface, timeslot5(5):The time slot 5 on the TDM interface, timeslot6(6):The time slot 6 on the TDM interface, timeslot7(7):The time slot 7 on the TDM interface, timeslot8(8):The time slot 8 on the TDM interface, timeslot9(9):The time slot 9 on the TDM interface, timeslot10(10):The time slot 10 on the TDM interface, timeslot11(11):The time slot 11 on the TDM interface, timeslot12(12):The time slot 12 on the TDM interface, timeslot13(13):The time slot 13 on the TDM interface, timeslot14(14):The time slot 14 on the TDM interface, timeslot15(15):The time slot 15 on the TDM interface, timeslot16(16):The time slot 16 on the TDM interface, timeslot17(17):The time slot 17 on the TDM interface, timeslot18(18):The time slot 18 on the TDM interface, timeslot19(19):The time slot 19 on the TDM interface, timeslot20(20):The time slot 20 on the TDM interface, timeslot21(21):The time slot 21 on the TDM interface, timeslot22(22):The time slot 22 on the TDM interface, timeslot23(23):The time slot 23 on the TDM interface, timeslot24(24):The time slot 24 on the TDM interface, timeslot25(25):The time slot 25 on the TDM interface, timeslot26(26):The time slot 26 on the TDM interface, timeslot27(27):The time slot 27 on the TDM interface, timeslot28(28):The time slot 28 on the TDM interface, timeslot29(29):The time slot 29 on the TDM interface, timeslot30(30):The time slot 30 on the TDM interface, timeslot31(31):The time slot 31 on the TDM interface." ::= { hwLinkModeChangeAutoCreateIfEntry 2 } hwIFExtPhyNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the physical interfaces." ::= { hwIFExtBase 5 } hwRemoteIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRemoteIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwRemoteIfTable is a virtual access interface table." ::= { hwIFExtBase 6 } hwRemoteIfEntry OBJECT-TYPE SYNTAX HwRemoteIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private extended remote interface table." INDEX { hwRemoteIfIndex } ::= { hwRemoteIfTable 1 } HwRemoteIfEntry ::= SEQUENCE { hwRemoteIfIndex InterfaceIndex, hwRemoteIfInOctets Counter64, hwRemoteIfInPkts Counter64, hwRemoteIfInUcastPkts Counter64, hwRemoteIfInMulticastPkts Counter64, hwRemoteIfInBroadcastPkts Counter64, hwRemoteIfInOctetRate Counter64, hwRemoteIfInPktRate Counter64, hwRemoteIfInErrorPkts Counter64, hwRemoteIfInDiscardPkts Counter64, hwRemoteIfOutOctets Counter64, hwRemoteIfOutPkts Counter64, hwRemoteIfOutUcastPkts Counter64, hwRemoteIfOutMulticastPkts Counter64, hwRemoteIfOutBroadcastPkts Counter64, hwRemoteIfOutOctetRate Counter64, hwRemoteIfOutPktRate Counter64, hwRemoteIfOutErrorPkts Counter64, hwRemoteIfOutDiscardPkts Counter64 } hwRemoteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of extended table of remote interface." ::= { hwRemoteIfEntry 1 } hwRemoteIfInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface." ::= { hwRemoteIfEntry 2 } hwRemoteIfInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received on the interface." ::= { hwRemoteIfEntry 3 } hwRemoteIfInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer." ::= { hwRemoteIfEntry 4 } hwRemoteIfInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { hwRemoteIfEntry 5 } hwRemoteIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { hwRemoteIfEntry 6 } hwRemoteIfInOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the incoming traffic on an interface." ::= { hwRemoteIfEntry 7 } hwRemoteIfInPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the incoming packets on an remote interface. The rate value is 64 bits." ::= { hwRemoteIfEntry 8 } hwRemoteIfInErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { hwRemoteIfEntry 9 } hwRemoteIfInDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { hwRemoteIfEntry 10 } hwRemoteIfOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface." ::= { hwRemoteIfEntry 11 } hwRemoteIfOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted out of the interface." ::= { hwRemoteIfEntry 12 } hwRemoteIfOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent." ::= { hwRemoteIfEntry 13 } hwRemoteIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { hwRemoteIfEntry 14 } hwRemoteIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { hwRemoteIfEntry 15 } hwRemoteIfOutOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the octet rate of the outgoing traffic on an interface." ::= { hwRemoteIfEntry 16 } hwRemoteIfOutPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of the outgoing packets on an interface." ::= { hwRemoteIfEntry 17 } hwRemoteIfOutErrorPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors." ::= { hwRemoteIfEntry 18 } hwRemoteIfOutDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { hwRemoteIfEntry 19 } hwIFExtDualFlowRateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIFExtDualFlowRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Second Cycle Rate Table." ::= { hwIFExtBase 7 } hwIFExtDualFlowRateEntry OBJECT-TYPE SYNTAX HwIFExtDualFlowRateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface second cycle rate entry." INDEX { hwIFExtDualFlowIndex } ::= { hwIFExtDualFlowRateTable 1 } HwIFExtDualFlowRateEntry ::= SEQUENCE { hwIFExtDualFlowIndex InterfaceIndex, hwIFExtDualFlowInputPktRate Counter64, hwIFExtDualFlowOutputPktRate Counter64, hwIFExtDualFlowInputOctetRate Counter64, hwIFExtDualFlowOutputOctetRate Counter64 } hwIFExtDualFlowIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable." ::= { hwIFExtDualFlowRateEntry 1 } hwIFExtDualFlowInputPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the second rate of the incoming packets on an interface." ::= { hwIFExtDualFlowRateEntry 2 } hwIFExtDualFlowOutputPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the second rate of the outgoing packets on an interface." ::= { hwIFExtDualFlowRateEntry 3 } hwIFExtDualFlowInputOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the second octet rate of the incoming traffic on an interface." ::= { hwIFExtDualFlowRateEntry 4 } hwIFExtDualFlowOutputOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the second octet rate of the outgoing traffic on an interface." ::= { hwIFExtDualFlowRateEntry 5 } hwInterfaceIp OBJECT IDENTIFIER ::= { hwIFExtObjects 2 } hwIfIpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwIfIpTable describes information about IP addresses configured for an interface. On an interface, one primary IP address and multiple secondary IP addresses can be configured. You can create, delete, and view information about the IP addresses of an interface." ::= { hwInterfaceIp 1 } hwIfIpEntry OBJECT-TYPE SYNTAX HwIfIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface IP address configuration " INDEX { hwIpAdEntAddr } ::= { hwIfIpTable 1 } HwIfIpEntry ::= SEQUENCE { hwIpAdEntAddr IpAddress, hwIpAdEntIfIndex Integer32, hwIpAdEntNetMask IpAddress, hwIpAdEntBcastAddr Integer32, hwIpAdEntReasmMaxSize Integer32, hwIpAdEntAddressType HwIpAddressType, hwIfIpMethod INTEGER, hwIpAdEntAddrStatus RowStatus } hwIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { hwIfIpEntry 1 } hwIpAdEntIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { hwIfIpEntry 2 } hwIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0." ::= { hwIfIpEntry 3 } hwIpAdEntBcastAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { hwIfIpEntry 4 } hwIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface." ::= { hwIfIpEntry 5 } hwIpAdEntAddressType OBJECT-TYPE SYNTAX HwIpAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The flag indicates whether the IP address is primary IP address. One interface has only one primary IP address, but can have many sub IP address. So when add a primary IP address to an interface that has already a primary IP address, the new primary address will replace old primary address and the old primary address will be deleted." ::= { hwIfIpEntry 6 } hwIfIpMethod OBJECT-TYPE SYNTAX INTEGER { assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address." ::= { hwIfIpEntry 7 } hwIpAdEntAddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable." ::= { hwIfIpEntry 8 } hwIfIpUnnumberedTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpUnnumberedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists information about the unnumbered IP address of the interface that borrows an IP address from another interface. You can create, delete, and view information about the borrowed IP address of an interface." ::= { hwInterfaceIp 2} hwIfIpUnnumberedEntry OBJECT-TYPE SYNTAX HwIfIpUnnumberedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface IP address unnumbered configuration " INDEX { hwUnnumberedIfIndex } ::= {hwIfIpUnnumberedTable 1} HwIfIpUnnumberedEntry ::= SEQUENCE { hwUnnumberedIfIndex InterfaceIndex, hwLendIfIndex InterfaceIndex, hwLendIpAddr IpAddress, hwLendIpAddrNetMask IpAddress, hwUnnumberedRowStatus RowStatus } hwUnnumberedIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value of the unnumbered interface." ::= { hwIfIpUnnumberedEntry 1 } hwLendIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The index value of the lend interface." ::= { hwIfIpUnnumberedEntry 11 } hwLendIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the lend interface." ::= { hwIfIpUnnumberedEntry 12 } hwLendIpAddrNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address mask of the lend interface." ::= { hwIfIpUnnumberedEntry 13 } hwUnnumberedRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable." ::= { hwIfIpUnnumberedEntry 51 } hwIfIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains addressing information relevant to the entity's interfaces." ::= { hwInterfaceIp 3 } hwIfIpAddrEntry OBJECT-TYPE SYNTAX HwIfIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface IP address configuration " INDEX { hwIfIpAddrEntIfIndex, hwIfIpAddrEntAddr } ::= { hwIfIpAddrTable 1 } HwIfIpAddrEntry ::= SEQUENCE { hwIfIpAddrEntIfIndex InterfaceIndex, hwIfIpAddrEntAddr IpAddress, hwIfIpAddrEntType INTEGER, hwIfIpAddrEntPrefix IpAddress, hwIfIpAddrEntOrigin INTEGER, hwIfIpAddrEntStatus INTEGER, hwIfIpAddrEntCreated TimeStamp, hwIfIpAddrEntLastChanged TimeStamp, hwIfIpAddrEntBcastAddr Integer32, hwIfIpAddrEntReasmMaxSize Integer32, hwIfIpAddrEntAddrType HwIpAddressType, hwIfIpAddrEntVpn DisplayString } hwIfIpAddrEntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { hwIfIpAddrEntry 1 } hwIfIpAddrEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { hwIfIpAddrEntry 2 } hwIfIpAddrEntType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2), broadcast(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address." ::= { hwIfIpAddrEntry 3 } hwIfIpAddrEntPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0." ::= { hwIfIpAddrEntry 4 } hwIfIpAddrEntOrigin OBJECT-TYPE SYNTAX INTEGER{ assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address." ::= { hwIfIpAddrEntry 5 } hwIfIpAddrEntStatus OBJECT-TYPE SYNTAX INTEGER { preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7), optimistic(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1)." ::= { hwIfIpAddrEntry 6 } hwIfIpAddrEntCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { hwIfIpAddrEntry 7 } hwIfIpAddrEntLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { hwIfIpAddrEntry 8 } hwIfIpAddrEntBcastAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { hwIfIpAddrEntry 9 } hwIfIpAddrEntReasmMaxSize OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface." ::= { hwIfIpAddrEntry 10 } hwIfIpAddrEntAddrType OBJECT-TYPE SYNTAX HwIpAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The flag indicates whether the IP address is primary IP address." ::= { hwIfIpAddrEntry 11 } hwIfIpAddrEntVpn OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vpn name of ip address.The public address does not have any value." ::= { hwIfIpAddrEntry 12 } -- ============================================================================ -- interface trunk attribute group -- ============================================================================ hwTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 3 } hwTrunkIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum of Trunk interface" ::= { hwTrunkAttr 1 } hwTrunkNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The nextindex of Trunk interface,that means its position" ::= { hwTrunkAttr 2 } hwTrunkIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwTrunkIfID uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk interface." ::= { hwTrunkAttr 3 } hwTrunkIfEntry OBJECT-TYPE SYNTAX HwTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the trunk table." INDEX { hwTrunkIndex } ::= { hwTrunkIfTable 1 } HwTrunkIfEntry ::= SEQUENCE { hwTrunkIndex Integer32, hwTrunkIfID Integer32, hwTrunkIfType INTEGER, hwTrunkIfIndex InterfaceIndex, hwTrunkIfModel INTEGER, hwTrunkIfBandWidthAffectLinkNum Integer32, hwTrunkIfMinLinkNum Integer32, hwTrunkIfRowStatus RowStatus, hwTrunkIfWorkingMode INTEGER, hwTrunkIfWorkingState INTEGER, hwTrunkIfAutoRecover INTEGER, hwTrunkIfPreemptEnable INTEGER, hwTrunkIfPreemptDelay Integer32, hwTrunkIfTimeoutReceive INTEGER, hwTrunkIfFlushSendEnable INTEGER, hwTrunkIfFlushVlanId Integer32, hwTrunkIfFlushPasswd SnmpPasswdString, hwTrunkIfForceSwitchEnable INTEGER, hwTrunkIfStatReset INTEGER, hwTrunkBandwidth -- the band width of the trunk interface Integer32, hwTrunkIfArpSendSpeed Integer32, hwTrunkIfLagSelectedPortStd INTEGER, hwTrunkIfLagMaxActiveLinkNum Integer32, hwTrunkETrunkPriority Integer32, hwTrunkETrunkSysID PhysAddress, hwTrunkETrunkPriorityReset INTEGER, hwTrunkETrunkSysIDReset INTEGER, hwTrunkLocalPrefMode INTEGER, hwTrunkIfTrackVrrpVrid Integer32, hwTrunkIfTrackVrrpIfIndex InterfaceIndex, hwTrunkIfTrackVrrpReset INTEGER, hwTrunkIfBackupPreemptEnable EnabledStatus, hwTrunkIfBackupPreemptDelay Integer32, hwTrunkIfCrcErrorSwitchEnable EnabledStatus, hwTrunkIfLagTimeOut Integer32, hwTrunkMemCount Integer32 } -- the max bandwidth-affected-linknumber -- the least active-linknumber of the up port hwTrunkIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The value of this object identifies the index of a trunk interface.The currently supported value ranges from 0 to 511." ::= { hwTrunkIfEntry 1 } hwTrunkIfID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The identification of the Trunk interface.It may identify Trunk and is an index of the interface." ::= { hwTrunkIfEntry 2 } hwTrunkIfType OBJECT-TYPE SYNTAX INTEGER { ethTrunk(1), ipTrunk(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link." ::= { hwTrunkIfEntry 3 } hwTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " Index number of the Trunk interface,it is consistent with ifIndex of ifTable in IF-MIB." ::= { hwTrunkIfEntry 4 } hwTrunkIfModel OBJECT-TYPE SYNTAX INTEGER { packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), fwdType(15), qos(16), labelNum(17), label(18), enhanced(19), l4(20), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Participated model of interface load. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic." ::= { hwTrunkIfEntry 5 } hwTrunkIfBandWidthAffectLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of this object identifies the maximum number of trunk interfaces that can be created. By default, the maximum number of trunk interfaces that can be created is 32. This entry can be set only on a Layer 2 interface." ::= { hwTrunkIfEntry 6 } hwTrunkIfMinLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of this object identifies the minimum number of trunk interfaces that can be created. The currently supported value ranges from 1 to 32. By default, the minimum number of trunk interfaces that can be created is 1. " ::= { hwTrunkIfEntry 7 } hwTrunkIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Current operation status of the row " ::= { hwTrunkIfEntry 8 } hwTrunkIfWorkingMode OBJECT-TYPE SYNTAX INTEGER { masterBackup(1), normalMode(2), lacpMode(3), lacpCompatibleMode(4), portStandbyMode(5), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION " The value of this object identifies the working mode of an Eth-Trunk interface. 1: master/backup access mode 2: normal mode 3: static LACP mode 4: compatible LACP mode 5: backup interface mode" ::= { hwTrunkIfEntry 9 } hwTrunkIfWorkingState OBJECT-TYPE SYNTAX INTEGER { generalMode(1), initialization(2), masterWorking(3), backupWorking(4), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION " Current working state of backup-access trunk. 1:general mode working state 2:initialization 3:master working 4:backup working" ::= { hwTrunkIfEntry 10 } hwTrunkIfAutoRecover OBJECT-TYPE SYNTAX INTEGER { generalMode(1), autoRecover(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION " If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto-recover" ::= { hwTrunkIfEntry 11 } hwTrunkIfPreemptEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether LACP priority preemption in static mode is enabled. By default, this function is not enabled." DEFVAL { disabled } ::= { hwTrunkIfEntry 12 } hwTrunkIfPreemptDelay OBJECT-TYPE SYNTAX Integer32 (0..180 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the delay for LACP priority preemption in static mode. You can set this object only after hwTrunkIfPreemptEnable is enabled. The value ranges from 10 to 180, in seconds. The default value is 30s. If LACP is not configured, the value of -1 is used." DEFVAL { 30 } ::= { hwTrunkIfEntry 13 } hwTrunkIfTimeoutReceive OBJECT-TYPE SYNTAX INTEGER { fast(1), slow(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the timeout period for receiving LACPDUs on an interface in static LACP mode. The value can be: fast: specifies the timeout period for receiving packets to be 3s. slow: specifies the timeout period for receiving packets to be 90s. The default timeout period for receiving packets is 3s. fast(1),slow(2). The return value of -1 indicates invalid." ::= { hwTrunkIfEntry 14 } hwTrunkIfFlushSendEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send SmartLink FlushDUs so as to delete the related MAC forwarding table of the layer2 equipment in network.Otherwise, SmartLink FlushDUs will not be sent." DEFVAL { disabled } ::= { hwTrunkIfEntry 15 } hwTrunkIfFlushVlanId OBJECT-TYPE SYNTAX Integer32 (0..4094 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled. " DEFVAL { 0 } ::= { hwTrunkIfEntry 16 } hwTrunkIfFlushPasswd OBJECT-TYPE SYNTAX SnmpPasswdString MAX-ACCESS read-create STATUS current DESCRIPTION "A 16-octet read-create value used to define the password for negotiation." DEFVAL { '00'h } ::= { hwTrunkIfEntry 17 } hwTrunkIfForceSwitchEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. However, if the master link is down, the operation will be forbidden." DEFVAL { enabled } ::= { hwTrunkIfEntry 18 } hwTrunkIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk." ::= { hwTrunkIfEntry 19 } hwTrunkBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1." ::= { hwTrunkIfEntry 20 } hwTrunkIfArpSendSpeed OBJECT-TYPE SYNTAX Integer32(800..3000 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface. " DEFVAL { 2000 } ::= { hwTrunkIfEntry 21 } hwTrunkIfLagSelectedPortStd OBJECT-TYPE SYNTAX INTEGER { speed(1), priority(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the port selection standard of LACP: based either on the port rate or on the port priority. By default, LACP selects ports based on the port priority. speed(1),priority(2). If LACP is not configured, the return value is invalid(-1)." DEFVAL { priority } ::= { hwTrunkIfEntry 22 } hwTrunkIfLagMaxActiveLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the upper threshold of interfaces that can be selected by the Eth-Trunk in static mode." ::= { hwTrunkIfEntry 23 } hwTrunkETrunkPriority OBJECT-TYPE SYNTAX Integer32 (0..65535 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority of the E-Trunk." ::= { hwTrunkIfEntry 24 } hwTrunkETrunkSysID OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default." ::= { hwTrunkIfEntry 25 } hwTrunkETrunkPriorityReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted." DEFVAL { no } ::= { hwTrunkIfEntry 26 } hwTrunkETrunkSysIDReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted." DEFVAL { no } ::= { hwTrunkIfEntry 27 } hwTrunkLocalPrefMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1)." ::= { hwTrunkIfEntry 28 } hwTrunkIfTrackVrrpVrid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VRID which the static mode Eth-trunk tracked to." ::= { hwTrunkIfEntry 29 } hwTrunkIfTrackVrrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The VRRP interface which the static mode Eth-trunk tracked to." ::= { hwTrunkIfEntry 30 } hwTrunkIfTrackVrrpReset OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is that the Eth-Trunk interface in static LACP mode is associated with an mVRRP backup group. The value yes(1) indicates performing the operation. This object indicates one operation but not one status, so when the operation is performed, the value is no(2). By default, the value is no(2)." ::= { hwTrunkIfEntry 31 } hwTrunkIfBackupPreemptEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled." DEFVAL { disabled } ::= { hwTrunkIfEntry 32 } hwTrunkIfBackupPreemptDelay OBJECT-TYPE SYNTAX Integer32 (0..30 | -1) MAX-ACCESS read-write STATUS current DESCRIPTION "The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfBackupPreemptDelay time." DEFVAL { 0 } ::= { hwTrunkIfEntry 33 } hwTrunkIfCrcErrorSwitchEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "make trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is low" DEFVAL { 2 } ::= { hwTrunkIfEntry 34 } hwTrunkIfLagTimeOut OBJECT-TYPE SYNTAX Integer32 (3..90 | 0) MAX-ACCESS read-write STATUS current DESCRIPTION "The expired time(Unit is second) of the port to receive LACPDUS in the fast mode. The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in the fast mode. The default value is customized with products. If the mode is not fast, the value is always 0." ::= { hwTrunkIfEntry 35 } hwTrunkMemCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Trunk member interfaces per Trunk." ::= { hwTrunkIfEntry 36 } hwTrunkSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the system priority defined in the Link Aggregation Control Protocol (LACP)." ::= { hwTrunkAttr 4 } hwTrunkUnknownUnicastIfModel OBJECT-TYPE SYNTAX INTEGER { packetAll(1), sourceDesMac(2), packetUdp(3), packetTcp(4), sourceDesIp(5), sourceMacIpv6(6), sourceIpIpv6(7), sourceIp(8), desIp(9), sourceMac(10), desMac(11), sourcePort(12), desPort(13), sourceDesPort(14), label(15), ipOrLabel(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "Participated model of load for unknown unicast. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic." ::= { hwTrunkAttr 5 } hwTrunkETrunkSystemPriority OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The system priority of the E-Trunk." ::= { hwTrunkAttr 6 } hwTrunkETrunkSystemID OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default." ::= { hwTrunkAttr 7 } hwTrunkCount OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured trunk interfaces on the device." ::= { hwTrunkAttr 8 } hwTrunkMemberCountUpperThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Upper threshold for the number of members of the Eth-Trunk in LACP mode." ::= { hwTrunkAttr 9 } hwTrunkMemberCountLowerThreshold OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Lower threshold for the number of members of the Eth-Trunk in LACP mode." ::= { hwTrunkAttr 10 } hwTrunkSubinterfacesCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured trunk sub-interfaces on the device." ::= { hwTrunkAttr 11 } hwTrunkSubinterfacesLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specification of trunk sub-interfaces on the device." ::= { hwTrunkAttr 12 } -- ========================================= -- Trunk member attribute Group -- ========================================= hwTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 4 } hwTrunkMemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "hwTrunkMemifIndex uniquely identifies this table. It is set when the table is created. This table describes the information about the trunk members." ::= { hwTrunkMemAttr 1 } hwTrunkMemEntry OBJECT-TYPE SYNTAX HwTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trunk member attribute information" INDEX { hwTrunkIndex, hwTrunkMemifIndex } ::= { hwTrunkMemTable 1 } HwTrunkMemEntry ::= SEQUENCE { hwTrunkMemifIndex Integer32, hwTrunkValidEntry INTEGER, hwTrunkSelectStatus INTEGER, hwTrunkLacpStatus EnabledStatus, hwTrunkDeleteFlag EnabledStatus, hwTrunkOperstatus INTEGER, hwTrunkIsDefaultLagRecv TruthValue, hwTrunkPortWeight Unsigned32, hwTrunkPortStandby Unsigned32, hwTrunkRowStatus RowStatus, hwTrunkPortMaster INTEGER, hwTrunkPortPriority Integer32, hwTrunkPortStatReset INTEGER, hwTrunkPortLacpMode INTEGER } hwTrunkMemifIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the index of a trunk member interface." ::= { hwTrunkMemEntry 1 } hwTrunkValidEntry OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the valid flag in the trunk. If the trunk has member interfaces added, the return value is valid(1)." DEFVAL { invalid } ::= { hwTrunkMemEntry 2 } hwTrunkSelectStatus OBJECT-TYPE SYNTAX INTEGER { trunkSelected(1), trunkDeselected(2), trunkIndep(3), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the status of a trunk. trunkSelected: A trunk member interface in this state can both forward data and receive LACPDUs from a remote device. trunkDeselected: A trunk member interface in this state cannot forward data. trunkIndep: A trunk member interface in this state can forward data but cannot receive LACPDUs from a remote device. This state applies only to Eth-Trunk interfaces that work in dynamic LACP mode." DEFVAL { trunkDeselected } ::= { hwTrunkMemEntry 3 } hwTrunkLacpStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the LACP status. enabled: An Eth-Trunk interface works in static LACP mode. disabled: An Eth-Trunk interface does not work in static LACP mode." DEFVAL { disabled } ::= { hwTrunkMemEntry 4 } hwTrunkDeleteFlag OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Flag is set trunk_del_enable(1) or trunk_del_disable(2), according to operation." DEFVAL { disabled } ::= { hwTrunkMemEntry 5 } hwTrunkOperstatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of operation, indicates port status. There are trunk_up(1) and trunk_down(2).It expresses whether port is shutdown." DEFVAL { down } ::= { hwTrunkMemEntry 6 } hwTrunkIsDefaultLagRecv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "We don't sustain now, default value is false." DEFVAL { false } ::= { hwTrunkMemEntry 7 } hwTrunkPortWeight OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the weight of a trunk member interface. The default weight of a Trunk member interface is 1. The sum weight of all member interfaces of a trunk cannot exceed the maximum number of member interfaces that a trunk supports." DEFVAL { 1 } ::= { hwTrunkMemEntry 8 } hwTrunkPortStandby OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value is backup of Trunk Port." DEFVAL { 0 } ::= { hwTrunkMemEntry 9 } hwTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row. " ::= { hwTrunkMemEntry 10 } hwTrunkPortMaster OBJECT-TYPE SYNTAX INTEGER { portSlave(1), portMaster(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Master port of backup-access eth-trunk or not 1: port-slave 2: port-master" ::= { hwTrunkMemEntry 11 } hwTrunkPortPriority OBJECT-TYPE SYNTAX Integer32 (0..65535 | -1) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value assigned to this Trunk Port. This 16-bit value is read-write." ::= { hwTrunkMemEntry 12 } hwTrunkPortStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates resetting LACPDU statistics on an interface. This object applies only to Eth-Trunk interfaces in static LACP mode. For Eth-Trunk interfaces in other modes, the return value is fixed at -1." ::= { hwTrunkMemEntry 13 } hwTrunkPortLacpMode OBJECT-TYPE SYNTAX INTEGER { invalid(1), active(2), passive(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of port joining Lacp." ::= { hwTrunkMemEntry 14 } -- =========================================================================== -- Global interfacce flow stat interval group -- =========================================================================== hwIFFlowStat OBJECT IDENTIFIER ::= { hwIFExtObjects 5 } -- metric: second hwIFFlowStatGlobalInterval OBJECT-TYPE SYNTAX Integer32 (10..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Global interval of interface flow stat.The interface interval is effective, when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configged. Flow stat rate of interface will be affected by the value of interval. The default value is 300s." ::= { hwIFFlowStat 1 } -- =========================================================================== -- Global interface flow stat interval group -- =========================================================================== hwIfStatistics OBJECT IDENTIFIER ::= { hwIFExtObjects 6 } hwIfEtherStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfEtherStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table describes attributes of Ethernet interfaces." ::= { hwIfStatistics 1 } hwIfEtherStatEntry OBJECT-TYPE SYNTAX HwIfEtherStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Ethernet Interface Statistic Table " INDEX { hwIfEtherStatIfIndex } ::= { hwIfEtherStatTable 1 } HwIfEtherStatEntry ::= SEQUENCE { hwIfEtherStatIfIndex InterfaceIndex, hwIfEtherStatInPkts64Octets Counter64, hwIfEtherStatInPkts65to127Octets Counter64, hwIfEtherStatInPkts128to255Octets Counter64, hwIfEtherStatInPkts256to511Octets Counter64, hwIfEtherStatInPkts512to1023Octets Counter64, hwIfEtherStatInPkts1024to1518Octets Counter64, hwIfEtherStatInJumboPkts Counter64, hwIfEtherStatInCRCPkts Counter64, hwIfEtherStatInLongPkts Counter64, hwIfEtherStatInJabberPkts Counter64, hwIfEtherStatInFragmentPkts Counter64, hwIfEtherStatInUnderSizePkts Counter64, hwIfEtherStatInOverRunPkts Counter64, hwIfEtherStatInPausePkts Counter64, hwIfEtherStatOutJumboPkts Counter64, hwIfEtherStatOutOverflowPkts Counter64, hwIfEtherStatOutUnderRunPkts Counter64, hwIfEtherStatOutPausePkts Counter64, hwIfEthIfStatReset INTEGER, hwIfEtherStatInDropEventPkts Counter64, hwIfEtherStatInAlignmentPkts Counter64, hwIfEtherStatInSymbolPkts Counter64, hwIfEtherStatInIgnoredPkts Counter64, hwIfEtherStatInFramePkts Counter64, hwIfEtherStatOutCollisionPkts Counter64, hwIfEtherStatOutDeferredPkts Counter64, hwIfEtherStatOutLateCollisionPkts Counter64, hwIfEtherStatOutExcessiveCollisionPkts Counter64, hwIfEtherStatOutBufferPurgationPkts Counter64 } hwIfEtherStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the index of a Layer 2 interface." ::= { hwIfEtherStatEntry 1 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5 hwIfEtherStatInPkts64Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length less than or equal to 64 bytes." ::= { hwIfEtherStatEntry 5 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6 hwIfEtherStatInPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length ranging from 65 bytes to 127 bytes." ::= { hwIfEtherStatEntry 6 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7 hwIfEtherStatInPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length ranging from 128 bytes to 255 bytes." ::= { hwIfEtherStatEntry 7 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8 hwIfEtherStatInPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length ranging from 256 bytes to 511 bytes." ::= { hwIfEtherStatEntry 8 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9 hwIfEtherStatInPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length ranging from 512 bytes to 1023 bytes." ::= { hwIfEtherStatEntry 9 } -- 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10 hwIfEtherStatInPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length ranging from 1024 bytes to 1518 bytes." ::= { hwIfEtherStatEntry 10 } hwIfEtherStatInJumboPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets each with a length greater than 1518 bytes." ::= { hwIfEtherStatEntry 11 } hwIfEtherStatInCRCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packets experiencing the CRC error check." ::= { hwIfEtherStatEntry 12 } hwIfEtherStatInLongPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packets each with a length greater than the maximum length." ::= { hwIfEtherStatEntry 13 } hwIfEtherStatInJabberPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packets each with a length greater than the maximum length and experiencing the CRC error check." ::= { hwIfEtherStatEntry 14 } hwIfEtherStatInFragmentPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of data packets each with a length shorter than 64 bytes and experiencing the CRC error check." ::= { hwIfEtherStatEntry 15 } hwIfEtherStatInUnderSizePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of data packets each with a length shorter than 64 bytes and without experiencing the CRC error check." ::= { hwIfEtherStatEntry 16 } hwIfEtherStatInOverRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets with FIFO overflow errors." ::= { hwIfEtherStatEntry 17 } hwIfEtherStatInPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received control frames." ::= { hwIfEtherStatEntry 18 } hwIfEtherStatOutJumboPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent packets each with a length greater than 1518 bytes." ::= { hwIfEtherStatEntry 19 } hwIfEtherStatOutOverflowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent data packets with FIFO overflow errors." ::= { hwIfEtherStatEntry 20 } hwIfEtherStatOutUnderRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of data packets with an empty FIFO." ::= { hwIfEtherStatEntry 21 } hwIfEtherStatOutPausePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent control frames." ::= { hwIfEtherStatEntry 22 } hwIfEthIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Reset the Statistic information Counter " ::= { hwIfEtherStatEntry 23 } hwIfEtherStatInDropEventPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of received Packets discarded for GBP full or back pressure discard " ::= { hwIfEtherStatEntry 24 } hwIfEtherStatInAlignmentPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packets with error headers." ::= { hwIfEtherStatEntry 25 } hwIfEtherStatInSymbolPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received unknown packets." ::= { hwIfEtherStatEntry 26 } hwIfEtherStatInIgnoredPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of received MAC control frames which have unknown opecode " ::= { hwIfEtherStatEntry 27 } hwIfEtherStatInFramePkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of received frames whose actual length differs with 802.3 " ::= { hwIfEtherStatEntry 28 } hwIfEtherStatOutCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended collision Frames(only happen in the 10/100M port with half duplex mode) " ::= { hwIfEtherStatEntry 29 } hwIfEtherStatOutDeferredPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended deferred but not collision Frames(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 30 } hwIfEtherStatOutLateCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended deferred and collision Frames(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 31 } hwIfEtherStatOutExcessiveCollisionPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port) " ::= { hwIfEtherStatEntry 32 } hwIfEtherStatOutBufferPurgationPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of sended Frames which is purged from the buffer because of long time " ::= { hwIfEtherStatEntry 33 } hwIfSdhStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfSdhStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table describes attributes of SDH interfaces. " ::= { hwIfStatistics 2 } hwIfSdhStatEntry OBJECT-TYPE SYNTAX HwIfSdhStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Sdh/Sonet Interface Statistic Table " INDEX { hwIfSdhStatIfIndex } ::= { hwIfSdhStatTable 1 } HwIfSdhStatEntry ::= SEQUENCE { hwIfSdhStatIfIndex InterfaceIndex, hwIfSdhStatInCRCPkts Counter64, hwIfSdhStatInShortPkts Counter64, hwIfSdhStatInLongPkts Counter64, hwIfSdhStatOutOverRunPkts Counter64, hwIfSdhStatOutUnderRunPkts Counter64, hwIfSdhIfStatReset INTEGER, hwIfSdhStatInOverRunPkts Counter64 } hwIfSdhStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the SDH interface index." ::= { hwIfSdhStatEntry 1 } hwIfSdhStatInCRCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of CRC errors in received packets." ::= { hwIfSdhStatEntry 2 } hwIfSdhStatInShortPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packets with the length less than the minimum length allowed." ::= { hwIfSdhStatEntry 3 } hwIfSdhStatInLongPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packets with the length greater than the maximum length allowed." ::= { hwIfSdhStatEntry 4 } hwIfSdhStatOutOverRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent packets with overflow errors." ::= { hwIfSdhStatEntry 5 } hwIfSdhStatOutUnderRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent packets with underrun errors." ::= { hwIfSdhStatEntry 6 } hwIfSdhIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Reset the Statistic information Counter " ::= { hwIfSdhStatEntry 7 } hwIfSdhStatInOverRunPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of received Packets whose queue overflow " ::= { hwIfSdhStatEntry 8 } hwIfAtmStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfAtmStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains ATM interface attributes." ::= { hwIfStatistics 3 } hwIfAtmStatEntry OBJECT-TYPE SYNTAX HwIfAtmStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Atm Interface Statistic Table " INDEX { hwIfAtmStatIfIndex } ::= { hwIfAtmStatTable 1 } HwIfAtmStatEntry ::= SEQUENCE { hwIfAtmStatIfIndex InterfaceIndex, hwIfAtmStatInGoodCells Counter64, hwIfAtmStatInIdleCells Counter64, hwIfAtmStatInCorrectedCells Counter64, hwIfAtmStatInUncorrectedCells Counter64, hwIfAtmStatOutGoodCells Counter64, hwIfAtmStatOutIdleCells Counter64, hwIfAtmIfStatReset INTEGER } hwIfAtmStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface index." ::= { hwIfAtmStatEntry 1 } hwIfAtmStatInGoodCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received normal cells." ::= { hwIfAtmStatEntry 2 } hwIfAtmStatInIdleCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received idle cells." ::= { hwIfAtmStatEntry 3 } hwIfAtmStatInCorrectedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received corrected cells." ::= { hwIfAtmStatEntry 4 } hwIfAtmStatInUncorrectedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received cells that cannot be corrected." ::= { hwIfAtmStatEntry 5 } hwIfAtmStatOutGoodCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent normal cells." ::= { hwIfAtmStatEntry 6 } hwIfAtmStatOutIdleCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent idle cells." ::= { hwIfAtmStatEntry 7 } hwIfAtmIfStatReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the resetting of the counter." ::= { hwIfAtmStatEntry 8 } hwIfPPPHDLCStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfPPPHDLCStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Serial Interface Statistic Table for PPP/HDLC " ::= { hwIfStatistics 4 } hwIfPPPHDLCStatEntry OBJECT-TYPE SYNTAX HwIfPPPHDLCStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table describes PPP or HDLC interface statistics." INDEX { hwIfPPPHDLCStatIfIndex } ::= { hwIfPPPHDLCStatTable 1 } HwIfPPPHDLCStatEntry ::= SEQUENCE { hwIfPPPHDLCStatIfIndex InterfaceIndex, hwIfPPPHDLCStatInCRCPkts Counter64, hwIfPPPHDLCStatInShortPkts Counter64, hwIfPPPHDLCStatInLongPkts Counter64 } hwIfPPPHDLCStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the serial interface index." ::= { hwIfPPPHDLCStatEntry 1 } hwIfPPPHDLCStatInCRCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets that experience a CRC check." ::= { hwIfPPPHDLCStatEntry 2 } hwIfPPPHDLCStatInShortPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets with each length less than the minimum length of 1 byte." ::= { hwIfPPPHDLCStatEntry 3 } hwIfPPPHDLCStatInLongPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received data packets with each length greater than the maximum length of 2036 bytes." ::= { hwIfPPPHDLCStatEntry 4 } hwIfDualStackStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfDualStackStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Statistic Table for IPv4/IPv6." ::= { hwIfStatistics 5 } hwIfDualStackStatsEntry OBJECT-TYPE SYNTAX HwIfDualStackStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface statistics entry containing objects for a particular interface and version of IPv4/IPv6." INDEX { hwIfDualStackStatsIPVersion, hwIfDualStackStatsIfIndex } ::= { hwIfDualStackStatsTable 1 } HwIfDualStackStatsEntry ::= SEQUENCE { hwIfDualStackStatsIPVersion InetVersion, hwIfDualStackStatsIfIndex InterfaceIndex, hwIfDualStackStatsInReceives Counter64, hwIfDualStackStatsInOctets Counter64, hwIfDualStackStatsOutTransmits Counter64, hwIfDualStackStatsOutOctets Counter64 } hwIfDualStackStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this row." ::= { hwIfDualStackStatsEntry 1 } hwIfDualStackStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable." ::= { hwIfDualStackStatsEntry 2 } hwIfDualStackStatsInReceives OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IPv4/IPv6 datagrams received, including those received on the interface's sub-interfaces." ::= { hwIfDualStackStatsEntry 3 } hwIfDualStackStatsInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in received IPv4/IPv6 datagrams, including those received on the interface's sub-interfaces." ::= { hwIfDualStackStatsEntry 4 } hwIfDualStackStatsOutTransmits OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces." ::= { hwIfDualStackStatsEntry 5 } hwIfDualStackStatsOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in IPv4/IPv6 datagrams delivered to the lower layers for transmission, including those transmitted on the interface's sub-interfaces." ::= { hwIfDualStackStatsEntry 6 } hwIfMonitorObject OBJECT IDENTIFIER ::= { hwIFExtObjects 7 } hwIfMonitorThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfMonitorThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Alarm monitor table " ::= { hwIfMonitorObject 1 } hwIfMonitorThresholdEntry OBJECT-TYPE SYNTAX HwIfMonitorThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of alarm monitor table " INDEX { hwIfMonitorIndex } ::= { hwIfMonitorThresholdTable 1 } HwIfMonitorThresholdEntry::= SEQUENCE { hwIfMonitorIndex InterfaceIndex, hwIfMonitorCrcErrorStatistics Counter64, hwIfMonitorCrcErrorThreshold Unsigned32, hwIfMonitorCrcErrorInterval Integer32, hwIfMonitorSdhErrorStatistics Counter64, hwIfMonitorSdhErrorThreshold Unsigned32, hwIfMonitorSdhErrorInterval Integer32, hwIfMonitorInputRate Integer32, hwIfMonitorInputRateThreshold Integer32, hwIfMonitorOutputRate Integer32, hwIfMonitorOutputRateThreshold Integer32, hwIfMonitorPauseFrameStatistics Counter64, hwIfMonitorPauseFrameThreshold Unsigned32, hwIfMonitorPauseFrameInterval Integer32, hwIfMonitorDelayValue Integer32, hwIfMonitorDelayThreshold Integer32, hwIfMonitorJitterValue Integer32, hwIfMonitorJitterThreshold Integer32, hwIfMonitorName DisplayString, hwIfMonitorSdhB1ErrorStatistics Counter64, hwIfMonitorSdhB1ErrorThreshold Integer32, hwIfMonitorSdhB1ErrorInterval Integer32, hwIfMonitorSdhB2ErrorStatistics Counter64, hwIfMonitorSdhB2ErrorThreshold Integer32, hwIfMonitorSdhB2ErrorInterval Integer32, hwIfMonitorSymbolErrorStatistics Counter64, hwIfMonitorSymbolErrorThreshold Unsigned32, hwIfMonitorSymbolErrorInterval Integer32, hwIfMonitorBadBytesErrorStatistics Counter64, hwIfMonitorBadBytesErrorThreshold Integer32, hwIfMonitorBadBytesErrorInterval Integer32, hwIfMonitorTxPauseFrameStatistics Counter64, hwIfMonitorTxPauseFrameHighThreshold Unsigned32, hwIfMonitorTxPauseFrameLowThreshold Unsigned32, hwIfMonitorTxPauseFrameInterval Integer32, hwIfMonitorPostFECErrorStatistics Counter64, hwIfMonitorAllStatistics Unsigned32 } hwIfMonitorIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " Index of alarm monitor table " ::= { hwIfMonitorThresholdEntry 1 } hwIfMonitorCrcErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Crc error statistics value " ::= { hwIfMonitorThresholdEntry 2 } hwIfMonitorCrcErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION " Crc error alarm threshold,default value is 3 and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 3 } hwIfMonitorCrcErrorInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 4 } hwIfMonitorSdhErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh error statistics value only for B3" ::= { hwIfMonitorThresholdEntry 5 } hwIfMonitorSdhErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 6 } hwIfMonitorSdhErrorInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 7 } hwIfMonitorInputRate OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Input rate percentage value " ::= { hwIfMonitorThresholdEntry 8 } hwIfMonitorInputRateThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Input rate alarm threshold,default value is 100 " ::= { hwIfMonitorThresholdEntry 9 } hwIfMonitorOutputRate OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " Output rate percentage value " ::= { hwIfMonitorThresholdEntry 10 } hwIfMonitorOutputRateThreshold OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION " Output rate alarm threshold,default value is 100 " ::= { hwIfMonitorThresholdEntry 11 } hwIfMonitorPauseFrameStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Pause frame statistics value " ::= { hwIfMonitorThresholdEntry 12 } hwIfMonitorPauseFrameThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION " Pause frame alarm threshold,and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 13 } hwIfMonitorPauseFrameInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Pause frame alarm interval time(unit is second),and 0 is an invalid value " ::= { hwIfMonitorThresholdEntry 14 } hwIfMonitorDelayValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Delay value " ::= { hwIfMonitorThresholdEntry 15 } hwIfMonitorDelayThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Delay alarm threshold " ::= { hwIfMonitorThresholdEntry 16 } hwIfMonitorJitterValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Jitter value " ::= { hwIfMonitorThresholdEntry 17 } hwIfMonitorJitterThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Jitter alarm threshold " ::= { hwIfMonitorThresholdEntry 18 } hwIfMonitorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Interface's name of alarm monitor table " ::= { hwIfMonitorThresholdEntry 19 } hwIfMonitorSdhB1ErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh B1 error statistics value" ::= { hwIfMonitorThresholdEntry 20 } hwIfMonitorSdhB1ErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B1 error alarm threshold,default value is 3" ::= { hwIfMonitorThresholdEntry 21 } hwIfMonitorSdhB1ErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B1 error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 22 } hwIfMonitorSdhB2ErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Sdh B2 error statistics value" ::= { hwIfMonitorThresholdEntry 23 } hwIfMonitorSdhB2ErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh error B2 alarm threshold,default value is 3" ::= { hwIfMonitorThresholdEntry 24 } hwIfMonitorSdhB2ErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Sdh B2 error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 25 } hwIfMonitorSymbolErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Symbol error statistics value " ::= { hwIfMonitorThresholdEntry 26 } hwIfMonitorSymbolErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION " Symbol error alarm threshold,default value is 3 " ::= { hwIfMonitorThresholdEntry 27 } hwIfMonitorSymbolErrorInterval OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Symbol error alarm interval time(unit is second),default value is 10s" ::= { hwIfMonitorThresholdEntry 28 } hwIfMonitorAllStatistics OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " All statistics value " ::= { hwIfMonitorThresholdEntry 29 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40 hwIfMonitorBadBytesErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 40 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41 hwIfMonitorBadBytesErrorThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 41 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42 hwIfMonitorBadBytesErrorInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorThresholdEntry 42 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.43 hwIfMonitorTxPauseFrameStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "TX pause frame statistics value." ::= { hwIfMonitorThresholdEntry 43 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.44 hwIfMonitorTxPauseFrameHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "TX pause frame high threshold, and 0 is an invalid value." ::= { hwIfMonitorThresholdEntry 44 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.45 hwIfMonitorTxPauseFrameLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "TX pause frame low threshold, and 0 is an invalid value." ::= { hwIfMonitorThresholdEntry 45 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.46 hwIfMonitorTxPauseFrameInterval OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TX pause frame alarm interval time(unit is second), and 0 is an invalid value." ::= { hwIfMonitorThresholdEntry 46 } -- 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.47 hwIfMonitorPostFECErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Post fec error corrected value." ::= { hwIfMonitorThresholdEntry 47 } hwIfMonitorGeneral OBJECT IDENTIFIER ::= { hwIFExtObjects 8 } hwIfMonitorCrcEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the crc error monitor, and the default value is disable." ::= { hwIfMonitorGeneral 1 } hwIfMonitorSdhEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the sdh error monitor, and the default value is disable." ::= { hwIfMonitorGeneral 2 } hwIfMonitorInputRateEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the input rate monitor, and the default value is disable." ::= { hwIfMonitorGeneral 3} hwIfMonitorOutputRateEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the output rate monitor, and the default value is disable." ::= { hwIfMonitorGeneral 4 } hwIfMonitorHalfDuplexEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the half duplex monitor, and the default value is disable." ::= { hwIfMonitorGeneral 5} hwIfMonitorPauseRisingEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the pause frame rising monitor, and the default value is disable." ::= { hwIfMonitorGeneral 6 } hwIfMonitorPauseContinuingEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enalbe or disable the pause frame continuing monitor, and the default value is disable." ::= { hwIfMonitorGeneral 7 } -- 1.3.6.1.4.1.2011.5.25.41.1.8.8 hwifMonitorBadBytesEnabledStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwIfMonitorGeneral 8 } hwAdminVrrpMemberIf OBJECT IDENTIFIER ::= { hwIFExtObjects 9 } hwIfFlowChangeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The time indicates when the interface's flow status changes." ::= { hwAdminVrrpMemberIf 1 } hwAdminVrrpMemberIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdminVrrpMemberIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The interface bound to VRRP table." ::= { hwAdminVrrpMemberIf 2 } hwAdminVrrpMemberIfEntry OBJECT-TYPE SYNTAX HwAdminVrrpMemberIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Entries of the interface bound to VRRP table." INDEX{ hwAdminVrrpMemberIfIndex } ::= { hwAdminVrrpMemberIfTable 1} HwAdminVrrpMemberIfEntry ::= SEQUENCE { hwAdminVrrpMemberIfIndex InterfaceIndex, hwAdminVrrpVrid Integer32, hwAdminVrrpIfIndex InterfaceIndex, hwAdminVrrpMemberIfFlowStatus INTEGER, hwAdminVrrpMemberIfRowStatus RowStatus } hwAdminVrrpMemberIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The number of the interface." ::= { hwAdminVrrpMemberIfEntry 1 } hwAdminVrrpVrid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The administrator VRRP vrid." ::= { hwAdminVrrpMemberIfEntry 2 } hwAdminVrrpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The administrator VRRP's configure interface index." ::= { hwAdminVrrpMemberIfEntry 3 } hwAdminVrrpMemberIfFlowStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Current flow status of interface. 1:up 2:down" ::= { hwAdminVrrpMemberIfEntry 4 } hwAdminVrrpMemberIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Current operation status of the row." ::= { hwAdminVrrpMemberIfEntry 5 } hwIfFluxLimit OBJECT IDENTIFIER ::= { hwIFExtObjects 10 } hwIfFluxLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfFluxLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Flux limit table " ::= { hwIfFluxLimit 1 } hwIfFluxLimitEntry OBJECT-TYPE SYNTAX HwIfFluxLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of flux limit table " INDEX { hwIfFluxIfIndex,hwIfFluxVlanId } ::= { hwIfFluxLimitTable 1} HwIfFluxLimitEntry ::= SEQUENCE { hwIfFluxIfIndex InterfaceIndex, hwIfFluxVlanId VlanIdOrNone, hwIfFluxDirection HWDirectionType, hwIfFluxLimitType INTEGER, hwIfFluxCir Integer32, hwIfFluxCbs Integer32, hwIfFluxRowStatus RowStatus } hwIfFluxIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index, same as ifIndex." ::= { hwIfFluxLimitEntry 1 } hwIfFluxVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID. 0 is the default value" ::= { hwIfFluxLimitEntry 2 } hwIfFluxDirection OBJECT-TYPE SYNTAX HWDirectionType MAX-ACCESS read-create STATUS current DESCRIPTION "Limit direction: inbound (1) outbound (2)" ::= { hwIfFluxLimitEntry 3 } hwIfFluxLimitType OBJECT-TYPE SYNTAX INTEGER { broadcastSuppression(1), multicastSuppression(2), unknownUnicastSuppression(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3)." ::= { hwIfFluxLimitEntry 4 } hwIfFluxCir OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Committed Information Rate. Unit: kbps. software QoS: 8..155000 hardware QoS: 100..10000000" ::= { hwIfFluxLimitEntry 5 } hwIfFluxCbs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Committed Burst Size. Unit: byte software QoS: 1875..19375000 hardware QoS: 64..33554432" ::= { hwIfFluxLimitEntry 6 } hwIfFluxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Three actions are used: active, createAndGo, destroy" ::= { hwIfFluxLimitEntry 7 } hwIfDiffServ OBJECT IDENTIFIER ::= { hwIFExtObjects 11 } hwIfDiffServTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfDiffServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the different service mode of interfaces." ::= { hwIfDiffServ 1} hwIfDiffServEntry OBJECT-TYPE SYNTAX HwIfDiffServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface different service mode attribute configuration." INDEX { hwIfDiffServIndex } ::= {hwIfDiffServTable 1} HwIfDiffServEntry ::= SEQUENCE { hwIfDiffServIndex InterfaceIndex, hwIfDiffServMode INTEGER, hwIfDiffServServiceClass INTEGER, hwIfDiffServColor INTEGER } hwIfDiffServIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of L2 interface. " ::= { hwIfDiffServEntry 1 } hwIfDiffServMode OBJECT-TYPE SYNTAX INTEGER { pipe(1), uniform(2), shortpipe(3), egresspipe(4), egressshortpipe(5), egressShortpipeTrustInnerVlan8021p(6), egressShortpipeTrustIpDscp(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Different service mode of the interface binding to a VLL, default is uniform." ::= { hwIfDiffServEntry 2 } hwIfDiffServServiceClass OBJECT-TYPE SYNTAX INTEGER { default(0), be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7." ::= { hwIfDiffServEntry 3 } hwIfDiffServColor OBJECT-TYPE SYNTAX INTEGER { default(0), green(1), yellow(2), red(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remarked color of packet in the ingress PE, the value must be green,yellow,red." ::= { hwIfDiffServEntry 4 } -- =========================================================================== -- ifname 4K VRF -- ============================================================================ hwIfQuery OBJECT IDENTIFIER ::= { hwIFExtObjects 12 } hwIfQueryTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes interface index information obtained based on the interface name. Currently, this table supports only the query function." ::= { hwIfQuery 1 } hwIfQueryEntry OBJECT-TYPE SYNTAX HwIfQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of private interface name table." INDEX { hwIfName } ::= { hwIfQueryTable 1 } HwIfQueryEntry ::= SEQUENCE { hwIfName OCTET STRING, hwIfIndex InterfaceIndex } hwIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..47)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates an interface name." ::= { hwIfQueryEntry 1 } hwIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the interface index." ::= { hwIfQueryEntry 2 } -- ========================================= -- Logic interface attribute Group -- ========================================= hwLogicIfAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 13 } hwLogicIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes how to create, delete, and display logical interfaces and sub-interfaces." ::= { hwLogicIfAttrib 1 } hwLogicIfEntry OBJECT-TYPE SYNTAX HwLogicIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." INDEX { hwLogicIfIndex } ::= { hwLogicIfTable 1 } HwLogicIfEntry ::= SEQUENCE { hwLogicIfIndex InterfaceIndexOrZero, hwLogicIfMainIndex InterfaceIndexOrZero, hwLogicIfType INTEGER, hwLogicIfName DisplayString, hwLogicIfParaOne INTEGER , hwLogicIfRowStatus RowStatus } hwLogicIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index." ::= { hwLogicIfEntry 1 } hwLogicIfMainIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0." ::= { hwLogicIfEntry 11 } hwLogicIfType OBJECT-TYPE SYNTAX INTEGER { ve(1), loopback(2), vlanif(3), subVe(4), subEthTrunk(5), subEthernet(6), subAtm(7), imaGroup(8), subImaGroup(9), subSerial(10), tunnel(11), mpGroup(13), bridgeIf(14), subAtmTrunk(15), dslGroup(16), wlanEss(17), stackPort(18), globalImaGroup(19), subGlobalImaGroup(20), remoteAp(21), vBridge(22), atmBundle(23), mtunnel(24), subPosFr(25), globalVe(26), subGlobalVe(27), nve(28), vt(29), fcoe(30), lmpif(31), serviceIf(32), virtualSerial(33), pwVe(34), subPwVe(35), vbdIf(36), gmplsUni(37) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type." ::= { hwLogicIfEntry 12 } hwLogicIfName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface name. The interface name must be a name without blank spaces and Tab characters." ::= { hwLogicIfEntry 13 } hwLogicIfParaOne OBJECT-TYPE SYNTAX INTEGER { p2p(1), p2mp(2), l2subif(3), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the extension parameter of a logical interface. The default value is p2mp. For other interfaces, this object returns none after the get operation." ::= { hwLogicIfEntry 14 } hwLogicIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwLogicIfEntry 51 } -- ========================================= -- Logic interface help attribute Group -- ========================================= hwLogicIfHelpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface help table." ::= { hwLogicIfAttrib 2 } hwLogicIfHelpEntry OBJECT-TYPE SYNTAX HwLogicIfHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface help table." INDEX { hwLogicIfhelpType } ::= { hwLogicIfHelpTable 1 } HwLogicIfHelpEntry ::= SEQUENCE { hwLogicIfhelpType INTEGER, hwLogicIfChassisNumber OCTET STRING, hwLogicIfSlotNumber OCTET STRING, hwLogicIfCardNumber OCTET STRING, hwLogicIfMin Integer32, hwLogicIfMax Integer32, hwLogicIfTotal Integer32 } hwLogicIfhelpType OBJECT-TYPE SYNTAX INTEGER { ve(1), imaGroup(8), tunnel(11), mpGroup(13), dslGroup(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the types of logical interfaces that can be queried." ::= { hwLogicIfHelpEntry 1 } hwLogicIfChassisNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the chassis that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 2 } hwLogicIfSlotNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 3 } hwLogicIfCardNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the card that supports the creation of the specified logical interface." ::= { hwLogicIfHelpEntry 4 } hwLogicIfMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum port number of the specified logical interface." ::= { hwLogicIfHelpEntry 5 } hwLogicIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum port number of the specified logical interface." ::= { hwLogicIfHelpEntry 6 } hwLogicIfTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of the specified logical interface." ::= { hwLogicIfHelpEntry 7 } -- ========================================= -- Logic interface dynamic help attribute Group -- ========================================= hwLogicIfDynamicHelpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicIfDynamicHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface dynamic help table." ::= { hwLogicIfAttrib 3 } hwLogicIfDynamicHelpEntry OBJECT-TYPE SYNTAX HwLogicIfDynamicHelpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface dynamic help table." INDEX { hwLogicDynamicIfhelpType, hwLogicDynamicIfChassisNumber, hwLogicDynamicIfSlotNumber, hwLogicDynamicIfCardNumber } ::= { hwLogicIfDynamicHelpTable 1 } HwLogicIfDynamicHelpEntry ::= SEQUENCE { hwLogicDynamicIfhelpType INTEGER, hwLogicDynamicIfChassisNumber Integer32, hwLogicDynamicIfSlotNumber Integer32, hwLogicDynamicIfCardNumber Integer32, hwLogicDynamicIfMin Integer32, hwLogicDynamicIfMax Integer32, hwLogicDynamicIfTotal Integer32 } hwLogicDynamicIfhelpType OBJECT-TYPE SYNTAX INTEGER { ve(1), imaGroup(8), tunnel(11), mpGroup(13), dslGroup(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the types of logical interfaces that can be queried." ::= { hwLogicIfDynamicHelpEntry 1 } hwLogicDynamicIfChassisNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the chassis that that can be queried." ::= { hwLogicIfDynamicHelpEntry 2 } hwLogicDynamicIfSlotNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that can be queried." ::= { hwLogicIfDynamicHelpEntry 3 } hwLogicDynamicIfCardNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the card that can be queried." ::= { hwLogicIfDynamicHelpEntry 4 } hwLogicDynamicIfMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum port number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 5 } hwLogicDynamicIfMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum port number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 6 } hwLogicDynamicIfTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of the specified logical interface." ::= { hwLogicIfDynamicHelpEntry 7 } -- ============================================================================ -- cpu packet statistic table -- ============================================================================ hwCppsObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 14 } hwCppsGlobalEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled globally, and the default value is disable." ::= { hwCppsObjects 1 } -- ======================= Cpps interface table ========================= hwCppsInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic interface configuration table." ::= { hwCppsObjects 2 } hwCppsInterfaceEntry OBJECT-TYPE SYNTAX HwCppsInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsInterfaceTable." INDEX { hwCppsInterfaceIndex } ::= { hwCppsInterfaceTable 1} HwCppsInterfaceEntry ::= SEQUENCE { hwCppsInterfaceIndex InterfaceIndex , hwCppsPortPvcEnable EnabledStatus , hwCppsPortVlanEnable EnabledStatus } hwCppsInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsInterfaceEntry 1 } hwCppsPortPvcEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled on PVC." DEFVAL { disabled } ::= { hwCppsInterfaceEntry 2 } hwCppsPortVlanEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Whether statistic function is enabled on VLAN." DEFVAL { disabled } ::= { hwCppsInterfaceEntry 3 } -- ======================= Cpps interface statistics table ========================= hwCppsIfStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic interface table." ::= { hwCppsObjects 3 } hwCppsIfStatisticsEntry OBJECT-TYPE SYNTAX HwCppsIfStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsIfStatisticsTable." INDEX { hwCppsIfStatisticsIndex } ::= { hwCppsIfStatisticsTable 1} HwCppsIfStatisticsEntry ::= SEQUENCE { hwCppsIfStatisticsIndex InterfaceIndex , hwCppsInterfacePktStatisic Counter64 , hwCppsInterfaceByteStatisic Counter64 , hwCppsResetInterfaceStatisic INTEGER } hwCppsIfStatisticsIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsIfStatisticsEntry 1 } hwCppsInterfacePktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the interface sent to CPU." ::= { hwCppsIfStatisticsEntry 2 } hwCppsInterfaceByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the interface sent to CPU." ::= { hwCppsIfStatisticsEntry 3 } hwCppsResetInterfaceStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { unreset } ::= { hwCppsIfStatisticsEntry 4 } -- ======================= Cpps ATM pvc table ========================= hwCppsAtmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic ATM PVC table." ::= { hwCppsObjects 4 } hwCppsAtmPvcEntry OBJECT-TYPE SYNTAX HwCppsAtmPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsAtmPvcTable." INDEX { hwCppsAtmIfIndex, hwCppsAtmVpi, hwCppsAtmVci } ::= { hwCppsAtmPvcTable 1} HwCppsAtmPvcEntry ::= SEQUENCE { hwCppsAtmIfIndex InterfaceIndex , hwCppsAtmVpi AtmVpIdentifier , hwCppsAtmVci AtmVcIdentifier , hwCppsAtmPvcPktStatisic Counter64 , hwCppsAtmPvcByteStatisic Counter64 , hwCppsResetAtmPvcStatisic INTEGER } hwCppsAtmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsAtmPvcEntry 1 } hwCppsAtmVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwCppsAtmPvcEntry 2 } hwCppsAtmVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VCI." ::= { hwCppsAtmPvcEntry 3 } hwCppsAtmPvcPktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the PVC sent to CPU." ::= { hwCppsAtmPvcEntry 4 } hwCppsAtmPvcByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the PVC sent to CPU." ::= { hwCppsAtmPvcEntry 5 } hwCppsResetAtmPvcStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { unreset } ::= { hwCppsAtmPvcEntry 6 } -- ======================= Cpps port vlan table ========================= hwCppsPortVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCppsPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CPU packet and byte statistic port VLAN table." ::= { hwCppsObjects 5 } hwCppsPortVlanEntry OBJECT-TYPE SYNTAX HwCppsPortVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hwCppsPortVlanTable." INDEX { hwCppsPortIndex, hwCppsVlanId } ::= { hwCppsPortVlanTable 1} HwCppsPortVlanEntry ::= SEQUENCE { hwCppsPortIndex InterfaceIndex , hwCppsVlanId VlanIdOrNone , hwCppsPortVlanPktStatisic Counter64 , hwCppsPortVlanByteStatisic Counter64 , hwCppsResetPortVlanStatisic INTEGER } hwCppsPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index number of the interface." ::= { hwCppsPortVlanEntry 1 } hwCppsVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID." ::= { hwCppsPortVlanEntry 2 } hwCppsPortVlanPktStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet statistic information of the port sent to CPU." ::= { hwCppsPortVlanEntry 3 } hwCppsPortVlanByteStatisic OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Byte statistic information of the port sent to CPU." ::= { hwCppsPortVlanEntry 4 } hwCppsResetPortVlanStatisic OBJECT-TYPE SYNTAX INTEGER{ reset(1), unreset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to reset statistics." DEFVAL { unreset } ::= { hwCppsPortVlanEntry 5 } -- ========================================= -- PortIsolation Group -- ========================================= hwPortIsolationGroupAttrib OBJECT IDENTIFIER ::= { hwIFExtObjects 15 } hwPortIsolationGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortIsolationGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." ::= { hwPortIsolationGroupAttrib 1 } hwPortIsolationGroupEntry OBJECT-TYPE SYNTAX HwPortIsolationGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Logic interface table." INDEX { hwPortIsolationGroupIndex } ::= { hwPortIsolationGroupTable 1 } HwPortIsolationGroupEntry ::= SEQUENCE { hwPortIsolationGroupIndex Integer32 (0..63), hwPortIsolationGroupPortList PortList, hwPortIsolationGroupRowStatus RowStatus } hwPortIsolationGroupIndex OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ID of Port-Isolation-Group." ::= { hwPortIsolationGroupEntry 1 } hwPortIsolationGroupPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "PortList of Port-Isolation-Group." ::= { hwPortIsolationGroupEntry 2 } hwPortIsolationGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwPortIsolationGroupEntry 3 } -- ============================================================================ -- interface vtrunk attribute group -- ============================================================================ hwVTrunkAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 16 } hwVTrunkIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vtrunk table." ::= { hwVTrunkAttr 1 } hwVTrunkIfEntry OBJECT-TYPE SYNTAX HwVTrunkIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the vtrunk table." INDEX { hwVTrunkIfIndex } ::= { hwVTrunkIfTable 1 } HwVTrunkIfEntry ::= SEQUENCE { hwVTrunkIfIndex InterfaceIndex, hwVTrunkIfID Integer32, hwVTrunkIfType INTEGER, hwVTrunkIfRowStatus RowStatus } hwVTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The IfIndex of the VTrunk interface." ::= { hwVTrunkIfEntry 1 } hwVTrunkIfID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The identification of the VTrunk interface.It may identify VTrunk and is an index of the interface." ::= { hwVTrunkIfEntry 2 } hwVTrunkIfType OBJECT-TYPE SYNTAX INTEGER { posTrunk(1), cposTrunk(2), atmTrunk(3), atmBundle(4) } MAX-ACCESS read-create STATUS current DESCRIPTION " The type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk and atm-bundle." ::= { hwVTrunkIfEntry 3 } hwVTrunkIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Current operation status of the row." ::= { hwVTrunkIfEntry 50 } -- ========================================= -- VTrunk member attribute Group -- ========================================= hwVTrunkMemAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 17 } hwVTrunkMemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VTrunk member attribute information table." ::= { hwVTrunkMemAttr 1 } hwVTrunkMemEntry OBJECT-TYPE SYNTAX HwVTrunkMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VTrunk member attribute information." INDEX { hwVTrunkMemIfIndex } ::= { hwVTrunkMemTable 1 } HwVTrunkMemEntry ::= SEQUENCE { hwVTrunkMemIfIndex Integer32, hwVTrunkIfnetIndex Integer32, hwVTrunkValidEntry INTEGER, hwVTrunkOperstatus INTEGER, hwVTrunkPortActive INTEGER, hwVTrunkRowStatus RowStatus } hwVTrunkMemIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VTrunk port index." ::= { hwVTrunkMemEntry 1 } hwVTrunkIfnetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfnetIndex of the VTrunk interface." ::= { hwVTrunkMemEntry 2 } hwVTrunkValidEntry OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Entries of VTrunk interface." DEFVAL { invalid } ::= { hwVTrunkMemEntry 3 } hwVTrunkOperstatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of operation, indicates port status. There are vtrunk_up(1) and vtrunk_down(2).It expresses whether port is shutdown." DEFVAL { down } ::= { hwVTrunkMemEntry 4 } hwVTrunkPortActive OBJECT-TYPE SYNTAX INTEGER { portInactive(1), portActive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Active port of backup-access vtrunk or not 1: portInactive 2: portActive." ::= { hwVTrunkMemEntry 5 } hwVTrunkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row. " ::= { hwVTrunkMemEntry 50 } -- ========================================= -- SubInterfaceBackupTrunk attribute Group -- ========================================= hwMasterBackupTrunkSubinterfaceAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 18 } hwMasterBackupTrunkSubinterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMasterBackupTrunkSubinterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Master-Backup Trunk Subinterface attribute information table." ::= { hwMasterBackupTrunkSubinterfaceAttr 1 } hwMasterBackupTrunkSubinterfaceEntry OBJECT-TYPE SYNTAX HwMasterBackupTrunkSubinterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Master-Backup Trunk Subinterface attribute information." INDEX { hwBackupTrunkIfIndex } ::= { hwMasterBackupTrunkSubinterfaceTable 1 } HwMasterBackupTrunkSubinterfaceEntry ::= SEQUENCE { hwBackupTrunkIfIndex InterfaceIndex, hwBackupStatus INTEGER, hwRevertiveMode INTEGER, hwWtrTime Integer32, hwFlushVlanId VlanIdOrNone } hwBackupTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates index of master/backup trunk sub-interface." ::= { hwMasterBackupTrunkSubinterfaceEntry 1 } hwBackupStatus OBJECT-TYPE SYNTAX INTEGER { init(1), master(2), backup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies backupStatus of master/backup trunk sub-interface." DEFVAL { init } ::= { hwMasterBackupTrunkSubinterfaceEntry 2 } hwRevertiveMode OBJECT-TYPE SYNTAX INTEGER { revertive(1), nonRevertive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies revertive-mode of master/backup trunk sub-interface." DEFVAL { revertive } ::= { hwMasterBackupTrunkSubinterfaceEntry 3 } hwWtrTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the wait-to-restore time of master/backup trunk sub-interface." DEFVAL { 0 } ::= { hwMasterBackupTrunkSubinterfaceEntry 4 } hwFlushVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates VLAN ID carried in a FlushPDU." DEFVAL { 0 } ::= { hwMasterBackupTrunkSubinterfaceEntry 5 } hwVaspPort OBJECT IDENTIFIER ::= { hwIFExtObjects 19 } hwVaspPortPeerMacTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVaspPortPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vasp port peer MAC table." ::= { hwVaspPort 1 } hwVaspPortPeerMacEntry OBJECT-TYPE SYNTAX HwVaspPortPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vasp port peer MAC table entry." INDEX { hwVaspPortIfIndex } ::= { hwVaspPortPeerMacTable 1 } HwVaspPortPeerMacEntry ::= SEQUENCE { hwVaspPortIfIndex InterfaceIndex, hwVaspPortName DisplayString, hwVaspPortPeerMac PhysAddress } hwVaspPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of interface." ::= { hwVaspPortPeerMacEntry 1 } hwVaspPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of vasp port." ::= { hwVaspPortPeerMacEntry 2 } hwVaspPortPeerMac OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer MAC of port." ::= { hwVaspPortPeerMacEntry 3 } hwIFExtTrapObjects OBJECT IDENTIFIER ::= { hwIFExtObjects 20 } hwLinkDownReason OBJECT-TYPE SYNTAX INTEGER { physicalLinkDown(1), -- interface phycial link down lacpNegotiationFailed(2), -- LACP negotiation failed receiveConfReqPacket(3), -- receive ConfReq packet receiveConfAckPacket(4), -- receive ConfAck packet receiveNakPacket(5), -- receive Nak packet receiveTermPacket(6), -- receive Term packet receiveTermAckPacket(7), -- receive TermAck packet receiveCodeRejPacket(8), -- receive CodeRej packet receiveProtoRejPacket(9), -- receive ProtoRej packet chapAuthenticationFailed(10), -- CHAP authentication failed papAuthenticationFailed(11), -- PAP authentication failed keepaliveOutOfTime(12), -- Keepalive out of time pvcDown(13), -- PVC down efmSessionFailed(14), -- EFM session failed tunnelDownOrInexist(15), -- tunnel down or tunnel not exist admindown(16), -- shutdown protocoldown(17), -- protocol down adminup(18), -- undo shutdown protocolup(19), -- protocol up mainifdown(20), -- main interface down physicalLinkIsUp(21), -- Interface physical link is Up conditionsForActivationNotMet(22), -- The conditions for the activation of the interface are not met conditionsForActivationAreMet(23), -- The conditions for the activation of the interface are met tunnelIsUp(24), -- The tunnel is Up interfaceIsDeleted(25), -- The interface is deleted bfdSessionDown(26), -- bfd session is down bfdSessionUp(27), -- bfd session is up efmSessionUp(28), -- efm session is up portAlarmDown(29), -- port alarm down dldpIsDown(30), -- dldp down dldpIsUp(31), -- dldp up vrrpFlowDown(32), -- vrrp flow down vrrpFlowUp(33), -- vrrp flow up veFlowDown(34), -- ve flow down veFlowUp(35), -- ve flow up errorDown(36), -- The interface is error down crcErrorDown(37), -- crc error down crcErrorUp(38), -- crc error up transceiverSpeedMismatch(39), -- Tranceiver speed does not match the speed configured on the port transceiverTypeMismatch(40), -- The port does not support current tranceiver negotiationUnsupported(41), -- Tranceiver does not support the negotiation configuration on the port linkHeartBeatDown(42) , -- link heart beat down triggerDown(43), -- The interface is trigger down cfmSessionDown(48), -- cfm session is down cfmSessionUp(49) -- cfm session is up } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason code of link changes." ::= { hwIFExtTrapObjects 1 } hwMainIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The main interface name." ::= { hwIFExtTrapObjects 2 } hwCfmOverPhysicalName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The configuration of the interface board or interface card is restored." ::= { hwIFExtTrapObjects 3 } hwIpv6IfChangeDownReason OBJECT-TYPE SYNTAX INTEGER { interfaceIsDown(1), ipv6AddressUnavailable(2), ipv6AddressAvailable(3), pppIpcp6Down(4), disableIpv6ProtocolorDeleteInterface(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason code of link changes." ::= { hwIFExtTrapObjects 4 } hwTrunkIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The name of trunk interface." ::= { hwIFExtTrapObjects 5 } hwTrunkMemIfDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The name of trunk member interface." ::= { hwIFExtTrapObjects 6 } hwTrunkActiveMember OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of active trunk members." ::= { hwIFExtTrapObjects 7 } hwIfExtTrapReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The reason of an event." ::= { hwIFExtTrapObjects 8 } hwLacpOldPDUInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The old lacp PDU field." ::= { hwIFExtTrapObjects 9 } hwLacpNewPDUInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The new lacp PDU field." ::= { hwIFExtTrapObjects 10 } hwLagMemberDownReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The lag member down reason." ::= { hwIFExtTrapObjects 11 } hwLicenseItemName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The license item name." ::= { hwIFExtTrapObjects 12 } hwLicenseServiceDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The service description." ::= { hwIFExtTrapObjects 13 } hwTrunkIfStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The status of trunk." ::= { hwIFExtTrapObjects 14 } hwType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "eth-trunk member changes type, only used for trap." ::= { hwIFExtTrapObjects 15 } hwEthTrunkIfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "eth-trunk Ifindex, only used for trap." ::= { hwIFExtTrapObjects 16 } hwTrunkName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "eth-trunk name, only used for trap." ::= { hwIFExtTrapObjects 17 } hwPortIfIndexList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "eth-trunk member ifindex list, only used for trap." ::= { hwIFExtTrapObjects 18 } hwPortNameList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "eth-trunk member name list, only used for trap." ::= { hwIFExtTrapObjects 19 } -- =========================================================================== -- Trunk map table -- =========================================================================== hwTrunkMapAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 21 } hwTrunkMapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTrunkMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The trunk map table." ::= { hwTrunkMapAttr 1 } hwTrunkMapEntry OBJECT-TYPE SYNTAX HwTrunkMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the trunk map table." INDEX { hwTrunkMapType, hwTrunkMapID } ::= { hwTrunkMapTable 1 } HwTrunkMapEntry ::= SEQUENCE { hwTrunkMapType INTEGER, hwTrunkMapID Integer32, hwTrunkMapIndex Integer32 } hwTrunkMapType OBJECT-TYPE SYNTAX INTEGER { ethTrunk(1), ipTrunk(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link." ::= { hwTrunkMapEntry 1 } hwTrunkMapID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The identification of the Trunk interface.It may identify Trunk and is an index of the interface." ::= { hwTrunkMapEntry 2 } hwTrunkMapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the Trunk interface." ::= { hwTrunkMapEntry 3 } -- ============================================================================ hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 2 } hwIFExtGroups OBJECT IDENTIFIER ::= { hwIFExtConformance 1 } -- hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 2 } -- hwIFExtConformance OBJECT IDENTIFIER ::= { hwIFExtMib 3 } -- hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 1 } -- ============================================================================ hwTrunkIfGroup OBJECT-GROUP OBJECTS { hwIFExtPhyStatus, hwIFExtMemberOf, hwTrunkIfMax, hwTrunkNextIndex, hwTrunkIndex, hwTrunkIfID, hwTrunkIfType, hwTrunkIfIndex, hwTrunkIfModel, hwTrunkIfBandWidthAffectLinkNum, hwTrunkIfMinLinkNum, hwTrunkIfRowStatus, hwTrunkIfWorkingMode, hwTrunkIfWorkingState, hwTrunkIfAutoRecover, hwTrunkIfPreemptEnable, hwTrunkIfPreemptDelay, hwTrunkIfTimeoutReceive, hwTrunkBandwidth, hwTrunkIfFlushSendEnable, hwTrunkIfFlushVlanId, hwTrunkIfFlushPasswd, hwTrunkIfForceSwitchEnable, hwTrunkIfStatReset, hwTrunkIfLagSelectedPortStd, hwTrunkIfLagMaxActiveLinkNum, hwTrunkETrunkPriority, hwTrunkETrunkSysID,hwTrunkETrunkPriorityReset, hwTrunkETrunkSysIDReset,hwTrunkLocalPrefMode, hwTrunkIfTrackVrrpVrid, hwTrunkIfTrackVrrpIfIndex, hwTrunkIfTrackVrrpReset } STATUS current DESCRIPTION "A collection of objects indicating information of IP address of interface, contain IP address, IP address mask and IP address acquiring method." ::= { hwIFExtGroups 1 } hwIfIpAddressGroup OBJECT-GROUP OBJECTS { hwIpAdEntAddr, hwIpAdEntIfIndex, hwIpAdEntNetMask, hwIpAdEntBcastAddr, hwIpAdEntReasmMaxSize, hwIpAdEntAddressType, hwIfIpMethod, hwIpAdEntAddrStatus,hwIfIpAddrEntIfIndex, hwIfIpAddrEntAddr, hwIfIpAddrEntType, hwIfIpAddrEntPrefix, hwIfIpAddrEntOrigin, hwIfIpAddrEntStatus, hwIfIpAddrEntCreated, hwIfIpAddrEntLastChanged, hwIfIpAddrEntBcastAddr, hwIfIpAddrEntReasmMaxSize, hwIfIpAddrEntAddrType, hwIfIpAddrEntVpn } STATUS current DESCRIPTION "A collection of objects indicating attribute of the Trunk interface." ::= { hwIFExtGroups 2 } -- hwIFExtHoldTime , hwIFExtGroup OBJECT-GROUP OBJECTS { hwIFExtLayer, hwIFExtFrameType, hwIFExtFlowStatInterval, hwIFExtFlushReceiveEnable, hwIFExtFlushVlanId, hwIFExtFlushPasswd, hwTrunkSystemPriority, hwTrunkUnknownUnicastIfModel, hwTrunkETrunkSystemPriority, hwTrunkETrunkSystemID, hwIFExtFlowStatus, hwIFExtMtu,hwIFExtMacAddr, hwIFExtBlockPriority, hwIFExtMacShift,hwIFExtSuppressStatus, hwIFExtPoisonReverse, hwIFExtInputPktRate, hwIFExtInputHighPktRate, hwIFExtOutputPktRate, hwIFExtOutputHighPktRate, hwIFExtInputOctetRate, hwIFExtInputHighOctetRate, hwIFExtOutputOctetRate, hwIFExtOutputHighOctetRate, hwTrunkCount, hwTrunkMemberCountUpperThreshold, hwTrunkMemberCountLowerThreshold, hwIFExtSuppressStatusIPv6, hwTrunkSubinterfacesCount, hwTrunkSubinterfacesLimit} STATUS current DESCRIPTION "A collection of objects indicating attribute of interface extended." ::= { hwIFExtGroups 3 } hwTrunkMemGroup OBJECT-GROUP OBJECTS { hwTrunkMemifIndex, hwTrunkValidEntry, hwTrunkSelectStatus, hwTrunkLacpStatus, hwTrunkDeleteFlag, hwTrunkOperstatus, hwTrunkIsDefaultLagRecv, hwTrunkPortWeight, hwTrunkPortStandby, hwTrunkPortMaster, hwTrunkPortPriority, hwTrunkPortStatReset, hwTrunkRowStatus } STATUS current DESCRIPTION "Trunk member attribute Group, now only can set hwTrunkPortWeight and hwTrunkPortStandby. hwTrunkSelectStatus and hwTrunkDeleteFlag can't be set. These attributes are for extend." ::= { hwIFExtGroups 4 } hwIFFlowStatGroup OBJECT-GROUP OBJECTS { hwIFFlowStatGlobalInterval } STATUS current DESCRIPTION "A collection of objects indicating interval time of interface flow stat." ::= { hwIFExtGroups 5 } hwAdminVrrpMemberIfGroup OBJECT-GROUP OBJECTS { hwIfFlowChangeTime, hwAdminVrrpVrid, hwAdminVrrpIfIndex, hwAdminVrrpMemberIfFlowStatus, hwAdminVrrpMemberIfRowStatus } STATUS obsolete DESCRIPTION "A collection of objects indicating attribute of the interface track administrator VRRP." ::= { hwIFExtGroups 6 } hwIfEtherStatGroup OBJECT-GROUP OBJECTS { hwIfEtherStatInPkts64Octets, hwIfEtherStatInPkts65to127Octets, hwIfEtherStatInPkts128to255Octets, hwIfEtherStatInPkts256to511Octets, hwIfEtherStatInPkts512to1023Octets, hwIfEtherStatInPkts1024to1518Octets, hwIfEtherStatInJumboPkts, hwIfEtherStatInCRCPkts, hwIfEtherStatInLongPkts, hwIfEtherStatInJabberPkts, hwIfEtherStatInFragmentPkts, hwIfEtherStatInUnderSizePkts, hwIfEtherStatInOverRunPkts, hwIfEtherStatInPausePkts, hwIfEtherStatOutJumboPkts, hwIfEtherStatOutOverflowPkts, hwIfEtherStatOutUnderRunPkts, hwIfEtherStatOutPausePkts, hwIfEthIfStatReset, hwIfEtherStatInDropEventPkts, hwIfEtherStatInAlignmentPkts, hwIfEtherStatInSymbolPkts, hwIfEtherStatInIgnoredPkts, hwIfEtherStatInFramePkts, hwIfEtherStatOutCollisionPkts, hwIfEtherStatOutDeferredPkts, hwIfEtherStatOutLateCollisionPkts, hwIfEtherStatOutExcessiveCollisionPkts, hwIfEtherStatOutBufferPurgationPkts } STATUS current DESCRIPTION "Interface statistic Group." ::= { hwIFExtGroups 7 } hwIFExtCompliances OBJECT IDENTIFIER ::= { hwIFExtConformance 2 } hwIfMonitorThresholdGroup OBJECT-GROUP OBJECTS{ hwIfMonitorCrcErrorStatistics , hwIfMonitorCrcErrorThreshold , hwIfMonitorCrcErrorInterval , hwIfMonitorSdhErrorStatistics , hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval , hwIfMonitorInputRate , hwIfMonitorInputRateThreshold , hwIfMonitorOutputRate , hwIfMonitorOutputRateThreshold, hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval, hwIfMonitorDelayValue, hwIfMonitorDelayThreshold, hwIfMonitorJitterValue, hwIfMonitorJitterThreshold, hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold, hwIfMonitorSdhB1ErrorInterval, hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold, hwIfMonitorSdhB2ErrorInterval, hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval, hwIfMonitorTxPauseFrameStatistics, hwIfMonitorTxPauseFrameHighThreshold, hwIfMonitorTxPauseFrameLowThreshold, hwIfMonitorTxPauseFrameInterval, hwIfMonitorPostFECErrorStatistics, hwIfMonitorName, hwIfMonitorAllStatistics } STATUS current DESCRIPTION "Alarm Monitor Group." ::= { hwIFExtGroups 8 } hwIfMonitorGeneralGroup OBJECT-GROUP OBJECTS{ hwIfMonitorCrcEnabledStatus , hwIfMonitorSdhEnabledStatus , hwIfMonitorInputRateEnabledStatus , hwIfMonitorOutputRateEnabledStatus , hwIfMonitorHalfDuplexEnabledStatus, hwIfMonitorPauseRisingEnabledStatus, hwIfMonitorPauseContinuingEnabledStatus, hwifMonitorBadBytesEnabledStatus } STATUS current DESCRIPTION "Alarm Monitor Enable Group." ::= { hwIFExtGroups 9 } hwIfFluxLimitGroup OBJECT-GROUP OBJECTS{ hwIfFluxDirection , hwIfFluxLimitType , hwIfFluxCir, hwIfFluxCbs, hwIfFluxRowStatus } STATUS current DESCRIPTION "Flux limit Group." ::= { hwIFExtGroups 10 } hwIfDiffServGroup OBJECT-GROUP OBJECTS{ hwIfDiffServMode, hwIfDiffServServiceClass, hwIfDiffServColor } STATUS current DESCRIPTION "Interface statistic Group." ::= { hwIFExtGroups 11 } hwIfQueryGroup OBJECT-GROUP OBJECTS{ hwIfIndex } STATUS current DESCRIPTION "Interface name Group." ::= { hwIFExtGroups 12 } hwLogicIfAttrGroup OBJECT-GROUP OBJECTS{ hwLogicIfMainIndex, hwLogicIfType, hwLogicIfName, hwLogicIfParaOne, hwLogicIfRowStatus } STATUS current DESCRIPTION "Logic interface table Group." ::= { hwIFExtGroups 13 } hwIfIpUnnumberedGroup OBJECT-GROUP OBJECTS{ hwLendIfIndex, hwLendIpAddr, hwLendIpAddrNetMask, hwUnnumberedRowStatus } STATUS current DESCRIPTION "Logic interface table Group." ::= { hwIFExtGroups 14 } hwLinkModeChangeAutoCreateIfGroup OBJECT-GROUP OBJECTS{ hwNewIfTimeslot } STATUS current DESCRIPTION "Interface time slot Group." ::= { hwIFExtGroups 15 } hwCppsGlobalEnableGroup OBJECT-GROUP OBJECTS { hwCppsGlobalEnable } STATUS current DESCRIPTION "A collection of objects indicating global CPU packet statistic function." ::= { hwIFExtGroups 16 } hwCppsInterfaceGroup OBJECT-GROUP OBJECTS { hwCppsPortPvcEnable , hwCppsPortVlanEnable } STATUS current DESCRIPTION "A collection of objects providing interface configuration function." ::= { hwIFExtGroups 17 } hwCppsIfStatisticsGroup OBJECT-GROUP OBJECTS { hwCppsInterfacePktStatisic , hwCppsInterfaceByteStatisic , hwCppsResetInterfaceStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic of the interface sent to CPU." ::= { hwIFExtGroups 18 } hwCppsAtmPvcGroup OBJECT-GROUP OBJECTS { hwCppsAtmPvcPktStatisic , hwCppsAtmPvcByteStatisic , hwCppsResetAtmPvcStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic for the pvc sent to CPU." ::= { hwIFExtGroups 19 } hwCppsPortVlanGroup OBJECT-GROUP OBJECTS { hwCppsPortVlanPktStatisic , hwCppsPortVlanByteStatisic , hwCppsResetPortVlanStatisic } STATUS current DESCRIPTION "A collection of objects providing packet and byte statistic for the port sent to CPU." ::= { hwIFExtGroups 20 } hwPortIsolationGroup OBJECT-GROUP OBJECTS { hwPortIsolationGroupPortList , hwPortIsolationGroupRowStatus } STATUS current DESCRIPTION "Port Isolation Group." ::= { hwIFExtGroups 21 } hwVTrunkIfGroup OBJECT-GROUP OBJECTS { hwVTrunkIfIndex, hwVTrunkIfID, hwVTrunkIfType, hwVTrunkIfRowStatus } STATUS current DESCRIPTION "VTrunk attribute Group." ::= { hwIFExtGroups 22 } hwVTrunkMemGroup OBJECT-GROUP OBJECTS { hwVTrunkMemIfIndex, hwVTrunkValidEntry, hwVTrunkOperstatus, hwVTrunkPortActive, hwVTrunkRowStatus } STATUS current DESCRIPTION "VTrunk member attribute Group." ::= { hwIFExtGroups 23 } hwLogicIfHelpTableGroup OBJECT-GROUP OBJECTS{ hwLogicIfhelpType, hwLogicIfChassisNumber, hwLogicIfSlotNumber, hwLogicIfCardNumber, hwLogicIfMin, hwLogicIfMax, hwLogicIfTotal } STATUS current DESCRIPTION "Logic interface help table Group." ::= { hwIFExtGroups 24 } hwSubInterfaceBackupTrunkGroup OBJECT-GROUP OBJECTS { hwBackupStatus, hwRevertiveMode, hwWtrTime, hwFlushVlanId } STATUS current DESCRIPTION "SubInterfaceBackupTrunk attribute Group." ::= { hwIFExtGroups 25 } hwVaspPortGroup OBJECT-GROUP OBJECTS { hwVaspPortName, hwVaspPortPeerMac } STATUS current DESCRIPTION "The vasp port group." ::= { hwIFExtGroups 26 } hwLogicIfDynamicHelpTableGroup OBJECT-GROUP OBJECTS{ hwLogicDynamicIfhelpType, hwLogicDynamicIfChassisNumber, hwLogicDynamicIfSlotNumber, hwLogicDynamicIfCardNumber, hwLogicDynamicIfMin, hwLogicDynamicIfMax, hwLogicDynamicIfTotal } STATUS current DESCRIPTION "Logic interface Dynamic help table Group." ::= { hwIFExtGroups 27 } hwIfExtGlobalbGroup OBJECT-GROUP OBJECTS{ hwMainIfName, hwCfmOverPhysicalName, hwLinkDownReason, hwIFExtPhyNumber, hwIpv6IfChangeDownReason, hwTrunkIfDescr, hwTrunkMemIfDescr, hwTrunkActiveMember, hwIfExtTrapReason, hwLacpOldPDUInfo, hwLacpNewPDUInfo, hwLagMemberDownReason, hwLicenseItemName, hwLicenseServiceDesc, hwTrunkIfStatus, hwType, hwEthTrunkIfIndex, hwTrunkName, hwPortIfIndexList, hwPortNameList } STATUS current DESCRIPTION "Logic interface Dynamic help table Group." ::= { hwIFExtGroups 28 } hwTrunkMapGroup OBJECT-GROUP OBJECTS{ hwTrunkMapType, hwTrunkMapID, hwTrunkMapIndex } STATUS current DESCRIPTION "Tunk map group." ::= { hwIFExtGroups 29 } hwModeChannelBandwidthGroup OBJECT-GROUP OBJECTS{ hwModeChannelBandwidthIfIndex, hwModeChannelBandwidthValue, hwModeChannelSubIfBandwidthSum, hwModeChannelIfName } STATUS current DESCRIPTION "The total bandwidth of the channelized sub-interfaces alarm monitor group." ::= { hwIFExtGroups 30 } -- ========================================= -- compliance statements -- ========================================= hwIFExtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities implementing Huawei extended interface management MIB." MODULE -- this module MANDATORY-GROUPS { hwTrunkIfGroup, hwIfIpAddressGroup, hwIFExtGroup, hwTrunkMemGroup, hwIFFlowStatGroup, hwIfQueryGroup,hwLogicIfAttrGroup, hwVTrunkIfGroup, hwVTrunkMemGroup } ::= { hwIFExtCompliances 1 } hwIFExtTraps OBJECT IDENTIFIER ::= { hwIFExtMib 3 } hwTrunkWorkingSwitch NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, hwTrunkIfWorkingState } STATUS current DESCRIPTION "This notification indicates that the trunk working mode is switched." ::= { hwIFExtTraps 1 } hwLacpNegotiateFailed NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 2 } hwLacpTotalLinkLoss NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "This notification indicates that all the link bandwidths are lost. Some member interfaces in the LAG do not work, and the number of working interfaces is smaller than the hwTrunkIfMinLinkNum value. The Partial Link Loss (PLL) alarm is restricted by the Total Link Loss (TLL) alarm. This object can be bound to two variables: 1. hwTrunkIfID: ID of a trunk interface. 2. ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 3 } hwLacpPartialLinkLoss NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Part loss of link bandwidth: it means that some members in the LAG group aren't in the working-state, making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss) will be restrained by the trap of TLL(Total Link Loss). 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 4 } hwIfFlowDown NOTIFICATION-TYPE OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName } STATUS current DESCRIPTION "This notification indicates that the interface's flow status changes to flow Down. This object can be bound to two variables: 1. sysUpTime: indicates the time when the event occurs. 2. hwIFExtFlowStatus: The interface's flow status changes to Down." ::= {hwIFExtTraps 5} hwIfFlowUp NOTIFICATION-TYPE OBJECTS { sysUpTime, hwIFExtFlowStatus,ifName } STATUS current DESCRIPTION "This notification indicates that the interface's flow status is restored to flow Up. This object can be bound to two variables: 1. sysUpTime: indicates the time when the event occurs. 2. hwIFExtFlowStatus: The interface's flow status is restored to Up." ::= {hwIFExtTraps 6} hwIfNameChange NOTIFICATION-TYPE STATUS current DESCRIPTION "When a single-chassis device is upgraded to a multi-chassis device, the interface information is changed and then the system sends a trap." ::= {hwIFExtTraps 7} hwIfNameChangeResume NOTIFICATION-TYPE STATUS current DESCRIPTION "When a multi-chassis restore a single-chassis device, the interface information is changed and then the system sends a trap." ::= {hwIFExtTraps 8} hwExtLinkDown NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf } STATUS deprecated DESCRIPTION "This object indicates that the link protocol of a trunk member interface goes Down." ::= {hwIFExtTraps 9} hwExtLinkUp NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus, ifDescr, hwIFExtPhyStatus, hwIFExtMemberOf } STATUS deprecated DESCRIPTION "This object indicates that the link protocol of a trunk member interface goes Up." ::= {hwIFExtTraps 10} hwLoopbackBlock NOTIFICATION-TYPE OBJECTS { ifDescr, hwNewIfTimeslot } STATUS current DESCRIPTION "This notification indicates block state of the interface." ::= {hwIFExtTraps 11} hwLoopbackResume NOTIFICATION-TYPE OBJECTS { hwIfName } STATUS current DESCRIPTION "This notification indicates normal state of the interface." ::= {hwIFExtTraps 12} hwLacpNegotiateResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "Negotiation failure alarm is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 13 } hwLacpTotalLinkLossResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Link bandwidth lost totally is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 14 } hwLacpPartialLinkLossResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName } STATUS current DESCRIPTION "Link bandwidth lost partly is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex." ::= { hwIFExtTraps 15 } hwTrunkSubIfStateToMaster NOTIFICATION-TYPE OBJECTS { hwIfName, hwBackupStatus } STATUS current DESCRIPTION "This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface." ::= { hwIFExtTraps 24 } hwTrunkSubIfStateToSlave NOTIFICATION-TYPE OBJECTS { hwIfName, hwBackupStatus } STATUS current DESCRIPTION "This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface." ::= { hwIFExtTraps 25 } hwEntityExtCfmOverSlot NOTIFICATION-TYPE OBJECTS { hwCfmOverPhysicalName } STATUS current DESCRIPTION "The hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board." ::= { hwIFExtTraps 26 } hwEntityExtCfmOverCard NOTIFICATION-TYPE OBJECTS { hwCfmOverPhysicalName } STATUS current DESCRIPTION "The hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card." ::= { hwIFExtTraps 27 } hwExtAllMemberDownNotify NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION "This notification indicates the time when the last member interface link status changes to down. The ifName indicates the name of the Trunk interface." ::= { hwIFExtTraps 28 } hwExtAllMemberDownResume NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION "This notification indicates the time when the first member interface link status changes to up. The ifName indicates the name of the Trunk interface." ::= { hwIFExtTraps 29 } hwTrunkMemNumberChange NOTIFICATION-TYPE OBJECTS { hwTrunkIfDescr, hwTrunkMemIfDescr , hwTrunkActiveMember, hwIfExtTrapReason, hwTrunkIfStatus } STATUS current DESCRIPTION " The number of active trunk members changed. " ::= { hwIFExtTraps 30 } hwIfControlFlapSuppress NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatus } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from unsuppress to suppress. " ::= { hwIFExtTraps 31 } hwIfControlFlapResume NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatus } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from suppress to unsuppress. " ::= { hwIFExtTraps 32 } hwExtInterfaceDelete NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr} STATUS current DESCRIPTION " This notification indicates the time when the interface was deleted. " ::= { hwIFExtTraps 33 } hwLacpPartnerExpiredLoss NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The member of LAG receive expired PDU from partner. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex." ::= { hwIFExtTraps 34 } hwLacpPDUChange NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName, hwLacpOldPDUInfo, hwLacpNewPDUInfo, hwIfExtTrapReason} STATUS current DESCRIPTION "The LACP member interface's status changed from selected to unselected due to the PDU change. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLacpOldPDUInfo: It is the old PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib. 5.hwLacpNewPDUInfo: It is the new PDU field of the port in the hwIFExtTrapObjects of hwIFExtMib. 6.hwIfExtTrapReason: It is the reason of this trap in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 35 } hwLacpPDUChangeResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The LACP member interface's status changed from unselected to selected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 36 } hwIfEfmDown NOTIFICATION-TYPE OBJECTS {ifName} STATUS current DESCRIPTION "This notification indicates that the interface status changes to EFM Down because the interface has tracked EFM session and the EFM session goes Down." ::= {hwIFExtTraps 37} hwIfEfmUp NOTIFICATION-TYPE OBJECTS {ifName} STATUS current DESCRIPTION "This notification indicates that the interface status changes to EFM Up because the interface has tracked EFM session and the EFM session goes Up." ::= {hwIFExtTraps 38} hwExtTrunkMemberCountExceedThreshold NOTIFICATION-TYPE OBJECTS {hwTrunkMemberCountUpperThreshold} STATUS current DESCRIPTION "The number of members of the Eth-Trunk in LACP mode exceeded the upper threshold." ::= {hwIFExtTraps 39} hwExtTrunkMemberCountExceedThresholdResume NOTIFICATION-TYPE OBJECTS {hwTrunkMemberCountLowerThreshold} STATUS current DESCRIPTION "The number of members of the Eth-Trunk in LACP mode fell below the lower threshold." ::= {hwIFExtTraps 40} hwExtTrunkWorkingStatusChange NOTIFICATION-TYPE OBJECTS {ifName, ifName} STATUS current DESCRIPTION "This notification indicates that the working status of the backup trunk changed." ::= {hwIFExtTraps 41} hwIfControlFlapSuppressIPv6 NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatusIPv6 } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from unsuppress to suppress(IPv6). " ::= { hwIFExtTraps 42 } hwIfControlFlapResumeIPv6 NOTIFICATION-TYPE OBJECTS { ifName, hwIFExtSuppressStatusIPv6 } STATUS current DESCRIPTION " This notification indicates the time when the interface's status changes from suppress to unsuppress(IPv6). " ::= { hwIFExtTraps 43 } hwLagMemberDown NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName, hwLagMemberDownReason} STATUS current DESCRIPTION "The LAG member status changes. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLagMemberDownReason: It is the down reason of the lag member port in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 44 } hwLagMemberDownResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName, hwLagMemberDownReason} STATUS current DESCRIPTION "The LAG member status resumes. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. 4.hwLagMemberDownReason: It is the down reason of the lag member port in the hwIFExtTrapObjects of hwIFExtMib. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 45 } -- 1.3.6.1.4.1.2011.5.25.41.3.46 hwLicenseEffectServiceAlarm NOTIFICATION-TYPE OBJECTS { hwLicenseItemName, ifName, hwLicenseServiceDesc } STATUS current DESCRIPTION "the license was not activated for the physical interface, the service of the corresponding interface or sub-interface is invaild" ::= { hwIFExtTraps 46 } -- 1.3.6.1.4.1.2011.5.25.41.3.47 hwLicenseEffectServiceResume NOTIFICATION-TYPE OBJECTS { hwLicenseItemName, ifName, hwLicenseServiceDesc } STATUS current DESCRIPTION "The license has been activated for the physical interface or the service of the corresponding interface and sub-interface has been removed." ::= { hwIFExtTraps 47 } -- 1.3.6.1.4.1.2011.5.25.41.3.48 hwTrunkAllMemUpNotify NOTIFICATION-TYPE OBJECTS { hwTrunkIfDescr } STATUS current DESCRIPTION " All trunk members's status change to up. " ::= { hwIFExtTraps 48 } hwPhysicalAdminIfDown NOTIFICATION-TYPE OBJECTS { ifIndex, ifName, ifOperStatus} STATUS current DESCRIPTION "The physical manage interface physical status changes to down." ::= {hwIFExtTraps 49} hwPhysicalAdminIfUp NOTIFICATION-TYPE OBJECTS { ifIndex, ifName, ifOperStatus} STATUS current DESCRIPTION "The physical manage interface physical status changes to up." ::= {hwIFExtTraps 50} hwLacpPartnerMisconnect NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The peer link of the LACP member interface might be incorrectly connected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 51 } hwLacpPartnerMisconnectResume NOTIFICATION-TYPE OBJECTS { hwTrunkIfID, ifName, ifName } STATUS current DESCRIPTION "The peer link of the LACP member interface was correctly connected. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex. " ::= { hwIFExtTraps 52 } hwTrunkMemberChange NOTIFICATION-TYPE OBJECTS {hwType, hwEthTrunkIfIndex, hwTrunkName, hwPortIfIndexList, hwPortNameList} STATUS current DESCRIPTION "Trap message is generated when eth-trunk member changed." ::= { hwIFExtTraps 53 } hwMonitorNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 4 } hwIfMonitorCrcErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold, hwIfMonitorCrcErrorInterval, hwIfMonitorName, hwIfMonitorAllStatistics } STATUS current DESCRIPTION "This object indicates that an alarm is generated when a CRC error occurs." ::= { hwMonitorNotifications 1 } hwIfMonitorCrcErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorCrcErrorStatistics, hwIfMonitorCrcErrorThreshold, hwIfMonitorCrcErrorInterval, hwIfMonitorName, hwIfMonitorAllStatistics } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the CRC error is removed." ::= { hwMonitorNotifications 2 } hwIfMonitorSdhErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when an SDH B3 error occurs." ::= { hwMonitorNotifications 3 } hwIfMonitorSdhErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhErrorStatistics, hwIfMonitorSdhErrorThreshold , hwIfMonitorSdhErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the SDH B3 error is removed." ::= { hwMonitorNotifications 4 } hwIfMonitorInputRateRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorInputRate, hwIfMonitorInputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Input rate alarm notification " ::= { hwMonitorNotifications 5 } hwIfMonitorInputRateResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorInputRate, hwIfMonitorInputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Input rate alarm resume " ::= { hwMonitorNotifications 6} hwIfMonitorOutputRateRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorOutputRate, hwIfMonitorOutputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Output rate alarm notification " ::= { hwMonitorNotifications 7} hwIfMonitorOutputRateResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorOutputRate, hwIfMonitorOutputRateThreshold, hwIfMonitorName } STATUS current DESCRIPTION " Output rate alarm resume " ::= { hwMonitorNotifications 8 } hwIfMonitorHalfDuplexRising NOTIFICATION-TYPE OBJECTS { ifDescr } STATUS current DESCRIPTION " Interface half duplex alarm norification " ::= { hwMonitorNotifications 9 } hwIfMonitorPauseFrameRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates the pause frame alarm." ::= { hwMonitorNotifications 10 } hwIfMonitorPauseFrameRisingResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorPauseFrameStatistics, hwIfMonitorPauseFrameThreshold, hwIfMonitorPauseFrameInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that the pause frame alarm is cleared." ::= { hwMonitorNotifications 11 } hwIfPortControlUp NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION " Control Up alarm notification " ::= { hwMonitorNotifications 12 } hwIfPortControlDown NOTIFICATION-TYPE OBJECTS { ifName } STATUS current DESCRIPTION " Control Down alarm notification " ::= { hwMonitorNotifications 13 } hwIfMonitorSdhB1ErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold , hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when the number of SDH B1 bit errors exceeds the upper threshold." ::= { hwMonitorNotifications 14 } hwIfMonitorSdhB1ErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB1ErrorStatistics, hwIfMonitorSdhB1ErrorThreshold , hwIfMonitorSdhB1ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the number of SDH B1 bit errors falls below the upper threshold." ::= { hwMonitorNotifications 15 } hwIfMonitorSdhB2ErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold , hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when the number of SDH B2 bit errors exceeds the upper threshold." ::= { hwMonitorNotifications 16 } hwIfMonitorSdhB2ErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSdhB2ErrorStatistics, hwIfMonitorSdhB2ErrorThreshold , hwIfMonitorSdhB2ErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the number of SDH B2 bit errors falls below the upper threshold." ::= { hwMonitorNotifications 17 } hwIfMonitorSymbolErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when a symbol error occurs on an interface." ::= { hwMonitorNotifications 18 } hwIfMonitorSymbolErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorSymbolErrorStatistics, hwIfMonitorSymbolErrorThreshold, hwIfMonitorSymbolErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the symbol error on the interface is removed." ::= { hwMonitorNotifications 19 } -- 1.3.6.1.4.1.2011.5.25.41.4.40 hwIfMonitorBadBytesErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when the number of bytes of error packets exceeds the upper threshold." ::= { hwMonitorNotifications 40 } -- 1.3.6.1.4.1.2011.5.25.41.4.41 hwIfMonitorBadBytesErrorResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorBadBytesErrorStatistics, hwIfMonitorBadBytesErrorThreshold, hwIfMonitorBadBytesErrorInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when the number of bytes of error packets falls below the upper threshold." ::= { hwMonitorNotifications 41 } -- 1.3.6.1.4.1.2011.5.25.41.4.42 hwIfMonitorTxPauseFrameRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorTxPauseFrameStatistics, hwIfMonitorTxPauseFrameHighThreshold, hwIfMonitorTxPauseFrameLowThreshold, hwIfMonitorTxPauseFrameInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when pause frames are sent." ::= { hwMonitorNotifications 42 } -- 1.3.6.1.4.1.2011.5.25.41.4.43 hwIfMonitorTxPauseFrameRisingResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorTxPauseFrameStatistics, hwIfMonitorTxPauseFrameHighThreshold, hwIfMonitorTxPauseFrameLowThreshold, hwIfMonitorTxPauseFrameInterval, hwIfMonitorName } STATUS current DESCRIPTION "This object indicates that a clear alarm is generated when sending pause frames is stopped." ::= { hwMonitorNotifications 43 } -- 1.3.6.1.4.1.2011.5.25.41.4.44 hwIfMonitorPostfecErrorRising NOTIFICATION-TYPE OBJECTS { hwIfMonitorName ,hwIfMonitorPostFECErrorStatistics} STATUS current DESCRIPTION "The post fec error crooected alarm appears." ::= { hwMonitorNotifications 44 } -- 1.3.6.1.4.1.2011.5.25.41.4.45 hwIfMonitorPostfecErrorRisingResume NOTIFICATION-TYPE OBJECTS { hwIfMonitorName ,hwIfMonitorPostFECErrorStatistics} STATUS current DESCRIPTION "The post fec error crooected alarm disappears." ::= { hwMonitorNotifications 45 } -- 1.3.6.1.4.1.2011.5.25.41.4.46 hwModeChannelRecvExceedThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the warning threshold." ::= { hwMonitorNotifications 46 } -- 1.3.6.1.4.1.2011.5.25.41.4.47 hwModeChannelRecvExceedThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the warning threshold. " ::= { hwMonitorNotifications 47 } -- 1.3.6.1.4.1.2011.5.25.41.4.48 hwModeChannelSendExceedThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the warning threshold." ::= { hwMonitorNotifications 48 } -- 1.3.6.1.4.1.2011.5.25.41.4.49 hwModeChannelSendExceedThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the warning threshold. " ::= { hwMonitorNotifications 49 } -- 1.3.6.1.4.1.2011.5.25.41.4.50 hwSubChannelBandwidthRising NOTIFICATION-TYPE OBJECTS { hwSubChannelBandwidthIfIndex ,hwSubChannelBandwidthValue} STATUS current DESCRIPTION "The alarm appear when the sum of channel mode subinterfaces bandwitch exceeded the bandwitch of father interface." ::= { hwMonitorNotifications 50 } -- 1.3.6.1.4.1.2011.5.25.41.4.51 hwSubChannelBandwidthResume NOTIFICATION-TYPE OBJECTS { hwSubChannelBandwidthIfIndex ,hwSubChannelBandwidthValue} STATUS current DESCRIPTION "The alarm disappear when the sum of channel mode subinterfaces bandwitch lower than the bandwitch of father interface." ::= { hwMonitorNotifications 51 } -- 1.3.6.1.4.1.2011.5.25.41.4.52 hwModeChannelRecvExceedGeneralThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the general threshold." ::= { hwMonitorNotifications 52 } -- 1.3.6.1.4.1.2011.5.25.41.4.53 hwModeChannelRecvExceedGeneralThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the general threshold. " ::= { hwMonitorNotifications 53 } -- 1.3.6.1.4.1.2011.5.25.41.4.54 hwModeChannelSendExceedGeneralThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the general threshold." ::= { hwMonitorNotifications 54 } -- 1.3.6.1.4.1.2011.5.25.41.4.55 hwModeChannelSendExceedGeneralThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the general threshold. " ::= { hwMonitorNotifications 55 } -- 1.3.6.1.4.1.2011.5.25.41.4.56 hwModeChannelRecvExceedSeriousThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the serious threshold." ::= { hwMonitorNotifications 56 } -- 1.3.6.1.4.1.2011.5.25.41.4.57 hwModeChannelRecvExceedSeriousThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelRecvFlowOverIfIndex ,hwModeChannelRecvFlowOverPercentage ,hwModeChannelRecvFlowOverThreshold ,hwModeChannelRecvFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the serious threshold. " ::= { hwMonitorNotifications 57 } -- 1.3.6.1.4.1.2011.5.25.41.4.58 hwModeChannelSendExceedSeriousThreshold NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm appear when the inflow at the channel mode subinterface exceeds the serious threshold." ::= { hwMonitorNotifications 58 } -- 1.3.6.1.4.1.2011.5.25.41.4.59 hwModeChannelSendExceedSeriousThresholdResume NOTIFICATION-TYPE OBJECTS { hwModeChannelSendFlowOverIfIndex ,hwModeChannelSendFlowOverPercentage ,hwModeChannelSendFlowOverThreshold ,hwModeChannelSendFlowOverInterfaceName} STATUS current DESCRIPTION "The alarm disappear when the inflow at the channel mode subinterface lower than the serious threshold. " ::= { hwMonitorNotifications 59 } -- 1.3.6.1.4.1.2011.5.25.41.4.60 hwModeChannelBandwidthAlarm NOTIFICATION-TYPE OBJECTS { hwModeChannelBandwidthIfIndex ,hwModeChannelBandwidthValue, hwModeChannelSubIfBandwidthSum, hwModeChannelIfName} STATUS current DESCRIPTION "The alarm appear when the total bandwidth of the channelized sub-interfaces on the same physical interface has exceeded the maximum available bandwidth of the physical interface." ::= { hwMonitorNotifications 60 } -- 1.3.6.1.4.1.2011.5.25.41.4.61 hwModeChannelBandwidthResume NOTIFICATION-TYPE OBJECTS { hwModeChannelBandwidthIfIndex ,hwModeChannelBandwidthValue, hwModeChannelSubIfBandwidthSum, hwModeChannelIfName} STATUS current DESCRIPTION "The alarm disappear when the total bandwidth of the channelized sub-interfaces on the same physical interface less than the maximum available bandwidth of the physical interface." ::= { hwMonitorNotifications 61 } hwIFExtTrapConformance OBJECT IDENTIFIER ::= { hwIFExtMib 5 } hwIFExtTrapGroups OBJECT IDENTIFIER ::= { hwIFExtTrapConformance 1 } hwIFExtTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwTrunkWorkingSwitch, hwLacpNegotiateFailed, hwLacpTotalLinkLoss, hwLacpPartialLinkLoss,hwIfFlowDown, hwIfFlowUp, hwIfNameChange, hwIfNameChangeResume, hwExtLinkDown, hwExtLinkUp, hwLoopbackBlock, hwLoopbackResume, hwLacpNegotiateResume,hwLacpTotalLinkLossResume,hwLacpPartialLinkLossResume, hwExtAllMemberDownNotify, hwExtAllMemberDownResume, hwIfControlFlapSuppress,hwIfControlFlapResume,hwExtInterfaceDelete, hwIfIpAddressChange, hwTrunkSubIfStateToMaster, hwTrunkSubIfStateToSlave, hwEntityExtCfmOverSlot, hwEntityExtCfmOverCard, hwTrunkMemNumberChange, hwLacpPartnerExpiredLoss, hwLacpPDUChange, hwLacpPDUChangeResume, hwIfEfmDown, hwIfEfmUp, hwExtTrunkMemberCountExceedThreshold, hwExtTrunkMemberCountExceedThresholdResume, hwExtTrunkWorkingStatusChange, hwIfControlFlapSuppressIPv6,hwIfControlFlapResumeIPv6,hwLagMemberDown, hwLagMemberDownResume,hwLicenseEffectServiceAlarm,hwLicenseEffectServiceResume, hwTrunkAllMemUpNotify,hwPhysicalAdminIfDown,hwPhysicalAdminIfUp,hwLacpPartnerMisconnect,hwLacpPartnerMisconnectResume, hwTrunkMemberChange} STATUS current DESCRIPTION "IF Trap Group." ::= { hwIFExtTrapGroups 1 } hwMonitorTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwIfMonitorCrcErrorRising, hwIfMonitorCrcErrorResume, hwIfMonitorSdhErrorRising, hwIfMonitorSdhErrorResume, hwIfMonitorInputRateRising, hwIfMonitorInputRateResume, hwIfMonitorOutputRateRising, hwIfMonitorOutputRateResume, hwIfMonitorHalfDuplexRising, hwIfMonitorPauseFrameRising, hwIfMonitorPauseFrameRisingResume, hwIfPortControlUp, hwIfPortControlDown, hwIfMonitorSdhB1ErrorRising, hwIfMonitorSdhB1ErrorResume, hwIfMonitorSdhB2ErrorRising, hwIfMonitorSdhB2ErrorResume, hwIfMonitorSymbolErrorRising, hwIfMonitorSymbolErrorResume, hwIfMonitorBadBytesErrorRising, hwIfMonitorBadBytesErrorResume, hwIfMonitorTxPauseFrameRising, hwIfMonitorTxPauseFrameRisingResume, hwIfMonitorPostfecErrorRising, hwIfMonitorPostfecErrorRisingResume, hwModeChannelRecvExceedThreshold, hwModeChannelRecvExceedThresholdResume, hwModeChannelSendExceedThreshold, hwModeChannelSendExceedThresholdResume, hwSubChannelBandwidthRising, hwSubChannelBandwidthResume, hwModeChannelRecvExceedGeneralThreshold, hwModeChannelRecvExceedGeneralThresholdResume, hwModeChannelSendExceedGeneralThreshold, hwModeChannelSendExceedGeneralThresholdResume, hwModeChannelRecvExceedSeriousThreshold, hwModeChannelRecvExceedSeriousThresholdResume, hwModeChannelSendExceedSeriousThreshold, hwModeChannelSendExceedSeriousThresholdResume, hwModeChannelBandwidthAlarm, hwModeChannelBandwidthResume } STATUS current DESCRIPTION "Monitor Trap Group." ::= { hwIFExtTrapGroups 2 } --add trap for IP address changed hwIFIpNotifications OBJECT IDENTIFIER ::= { hwIFExtMib 6 } hwIfIpAddressChange NOTIFICATION-TYPE OBJECTS { ipAdEntNetMask,ipAdEntNetMask,ifName } STATUS current DESCRIPTION "IP Trap Group. The trap will be generated when the primary IP address of an interface changes." ::= { hwIFIpNotifications 1 } hwMruDiscardStatisticAttr OBJECT IDENTIFIER ::= { hwIFExtObjects 22 } -- -- The Mru Discard Statistic Table -- hwMruDiscardStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HWMruDiscardStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the mru discard statistic " ::= { hwMruDiscardStatisticAttr 1 } hwMruDiscardStatisticEntry OBJECT-TYPE SYNTAX HWMruDiscardStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides the information of the mru discard statistic ." INDEX { hwMruDiscardStatisticIfIndex} ::= { hwMruDiscardStatisticTable 1 } HWMruDiscardStatisticEntry ::= SEQUENCE { hwMruDiscardStatisticIfIndex InterfaceIndex, hwMruDiscardStatisticDropPack Counter64, hwMruDiscardStatisticDropByte Counter64 } hwMruDiscardStatisticIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface index." ::= { hwMruDiscardStatisticEntry 1 } hwMruDiscardStatisticDropPack OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the drop packets." ::= { hwMruDiscardStatisticEntry 2 } hwMruDiscardStatisticDropByte OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the drop bytes." ::= { hwMruDiscardStatisticEntry 3 } -- ============================================================================ -- ============================================================================ -- =========================================================================== -- interface rate statistic -- =========================================================================== hwIfIpStatistics OBJECT IDENTIFIER ::= { hwIFExtObjects 23 } hwIfIpStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIfIpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Interface Rate Statistic Table " ::= { hwIfIpStatistics 1 } hwIfIpStatisticsEntry OBJECT-TYPE SYNTAX HwIfIpStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Interface Rate Statistic Table " INDEX { hwIfIpStatsIPVersion, hwIfIpStatsIfIndex } ::= { hwIfIpStatisticsTable 1 } HwIfIpStatisticsEntry ::= SEQUENCE { hwIfIpStatsIPVersion InetVersion, hwIfIpStatsIfIndex InterfaceIndex, hwIfIpStatsInHostPacketRates Counter64, hwIfIpStatsInHostBitRates Counter64, hwIfIpStatsOutHostPacketRates Counter64, hwIfIpStatsOutHostBitRates Counter64, hwIfIpStatsInFwdPacketRates Counter64, hwIfIpStatsInFwdBitRates Counter64, hwIfIpStatsOutFwdPacketRates Counter64, hwIfIpStatsOutFwdBitRates Counter64 } hwIfIpStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this row." ::= { hwIfIpStatisticsEntry 1 } hwIfIpStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { hwIfIpStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.3 hwIfIpStatsInHostPacketRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The packet rates of the interface which receive host packets." ::= { hwIfIpStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.4 hwIfIpStatsInHostBitRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The bit rates of the interface which receive host packets." ::= { hwIfIpStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.5 hwIfIpStatsOutHostPacketRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The packet rates of the interface which send host packets." ::= { hwIfIpStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.6 hwIfIpStatsOutHostBitRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The bit rates of the interface which send host packets." ::= { hwIfIpStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.7 hwIfIpStatsInFwdPacketRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The packet rates of the interface which receive forwarding packets." ::= { hwIfIpStatisticsEntry 7 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.8 hwIfIpStatsInFwdBitRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The bit rates of the interface which receive forwarding packets." ::= { hwIfIpStatisticsEntry 8 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.9 hwIfIpStatsOutFwdPacketRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The packet rates of the interface which send forwarding packets." ::= { hwIfIpStatisticsEntry 9 } -- 1.3.6.1.4.1.2011.5.25.41.1.21.1.1.10 hwIfIpStatsOutFwdBitRates OBJECT-TYPE SYNTAX Counter64 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The bit rates of the interface which send forwarding packets." ::= { hwIfIpStatisticsEntry 10 } -- =========================================================================== -- Mode Channel FlowOver -- =========================================================================== -- hwModeChannelFlowOver 1.3.6.1.4.1.2011.5.25.41.1.24 hwModeChannelFlowOver OBJECT IDENTIFIER ::= { hwIFExtObjects 24 } -- hwModeChannelRecvFlowOverTable 1.3.6.1.4.1.2011.5.25.41.1.24.1 hwModeChannelRecvFlowOverTable OBJECT-TYPE SYNTAX SEQUENCE OF HwModeChannelRecvFlowOverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Mode Channel Subinterface Received FlowOver Table " ::= { hwModeChannelFlowOver 1 } -- hwModeChannelRecvFlowOverEntry 1.3.6.1.4.1.2011.5.25.41.1.24.1.1 hwModeChannelRecvFlowOverEntry OBJECT-TYPE SYNTAX HwModeChannelRecvFlowOverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Mode Channel Subinterface Received FlowOver Table " INDEX { hwModeChannelRecvFlowOverIfIndex} ::= { hwModeChannelRecvFlowOverTable 1 } HwModeChannelRecvFlowOverEntry ::= SEQUENCE { hwModeChannelRecvFlowOverIfIndex InterfaceIndex, hwModeChannelRecvFlowOverPercentage Integer32, hwModeChannelRecvFlowOverThreshold Integer32, hwModeChannelRecvFlowOverInterfaceName DisplayString } --hwModeChannelRecvFlowOverIfIndex 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.1 hwModeChannelRecvFlowOverIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Index Value of Mode Channel Subinterface Received FlowOver Table." ::= { hwModeChannelRecvFlowOverEntry 1 } -- hwModeChannelRecvFlowOverPercentage 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.2 hwModeChannelRecvFlowOverPercentage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of Mode Channel Subinterface Received FlowOver Table." ::= { hwModeChannelRecvFlowOverEntry 2 } -- hwModeChannelRecvFlowOverThreshold 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.3 hwModeChannelRecvFlowOverThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold of Mode Channel Subinterface Received FlowOver Table." ::= { hwModeChannelRecvFlowOverEntry 3 } -- hwModeChannelRecvFlowOverInterfaceName 1.3.6.1.4.1.2011.5.25.41.1.24.1.1.7 hwModeChannelRecvFlowOverInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Name of Mode Channel Subinterface Received FlowOver Table." ::= { hwModeChannelRecvFlowOverEntry 7 } -- hwModeChannelSendFlowOverTable 1.3.6.1.4.1.2011.5.25.41.1.24.2 hwModeChannelSendFlowOverTable OBJECT-TYPE SYNTAX SEQUENCE OF HwModeChannelSendFlowOverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Mode Channel Subinterface Send FlowOver Table " ::= { hwModeChannelFlowOver 2 } -- hwModeChannelSendFlowOverEntry 1.3.6.1.4.1.2011.5.25.41.1.24.2.1 hwModeChannelSendFlowOverEntry OBJECT-TYPE SYNTAX HwModeChannelSendFlowOverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Mode Channel Subinterface Send FlowOver Table " INDEX { hwModeChannelSendFlowOverIfIndex} ::= { hwModeChannelSendFlowOverTable 1 } HwModeChannelSendFlowOverEntry ::= SEQUENCE { hwModeChannelSendFlowOverIfIndex InterfaceIndex, hwModeChannelSendFlowOverPercentage Integer32, hwModeChannelSendFlowOverThreshold Integer32, hwModeChannelSendFlowOverInterfaceName DisplayString } --hwModeChannelSendFlowOverIfIndex 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.1 hwModeChannelSendFlowOverIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Index Value of Mode Channel Subinterface Send FlowOver Table." ::= { hwModeChannelSendFlowOverEntry 1 } -- hwModeChannelSendFlowOverPercentage 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.2 hwModeChannelSendFlowOverPercentage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of Mode Channel Subinterface Send FlowOver Table." ::= { hwModeChannelSendFlowOverEntry 2 } -- hwModeChannelSendFlowOverThreshold 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.3 hwModeChannelSendFlowOverThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold of Mode Channel Subinterface Send FlowOver Table." ::= { hwModeChannelSendFlowOverEntry 3 } -- hwModeChannelSendFlowOverInterfaceName 1.3.6.1.4.1.2011.5.25.41.1.24.2.1.4 hwModeChannelSendFlowOverInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Name of Mode Channel Subinterface Send FlowOver Table." ::= { hwModeChannelSendFlowOverEntry 4 } -- hwSubChannelIfBandwidthTable 1.3.6.1.4.1.2011.5.25.41.1.24.3 hwSubChannelIfBandwidthTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSubChannelIfBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Mode Channel SubInterface Bandwidth Table " ::= { hwModeChannelFlowOver 3 } -- hwSubChannelIfBandwidthEntry 1.3.6.1.4.1.2011.5.25.41.1.24.3.1 hwSubChannelIfBandwidthEntry OBJECT-TYPE SYNTAX HwSubChannelIfBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of Mode Channel SubInterface Bandwidth Table " INDEX { hwSubChannelBandwidthIfIndex} ::= { hwSubChannelIfBandwidthTable 1 } HwSubChannelIfBandwidthEntry ::= SEQUENCE { hwSubChannelBandwidthIfIndex InterfaceIndex, hwSubChannelBandwidthValue Integer32 } --hwSubChannelBandwidthIfIndex 1.3.6.1.4.1.2011.5.25.41.1.24.3.1.1 hwSubChannelBandwidthIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Index Value of Mode Channel SubInterface Bandwidth Table." ::= { hwSubChannelIfBandwidthEntry 1 } -- hwSubChannelBandwidthValue 1.3.6.1.4.1.2011.5.25.41.1.24.3.1.2 hwSubChannelBandwidthValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bandwidth Value of Mode Channel SubInterface Bandwidth Table." ::= { hwSubChannelIfBandwidthEntry 2 } -- =========================================================================== -- Mode Channel Bandwidth -- =========================================================================== -- hwModeChannelBandwidth 1.3.6.1.4.1.2011.5.25.41.1.25 hwModeChannelBandwidth OBJECT IDENTIFIER ::= { hwIFExtObjects 25 } -- hwModeChannelBandwidthTable 1.3.6.1.4.1.2011.5.25.41.1.25.1 hwModeChannelBandwidthTable OBJECT-TYPE SYNTAX SEQUENCE OF HwModeChannelBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The total bandwidth of the channelized sub-interfaces alarm monitor table." ::= { hwModeChannelBandwidth 1 } -- hwModeChannelBandwidthEntry 1.3.6.1.4.1.2011.5.25.41.1.25.1.1 hwModeChannelBandwidthEntry OBJECT-TYPE SYNTAX HwModeChannelBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the total bandwidth of the channelized sub-interfaces alarm monitor table." INDEX { hwModeChannelBandwidthIfIndex} ::= { hwModeChannelBandwidthTable 1 } HwModeChannelBandwidthEntry ::= SEQUENCE { hwModeChannelBandwidthIfIndex InterfaceIndex, hwModeChannelBandwidthValue Integer32, hwModeChannelSubIfBandwidthSum Integer32, hwModeChannelIfName DisplayString } -- hwModeChannelBandwidthIfIndex 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.1 hwModeChannelBandwidthIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Index Value of the total bandwidth of the channelized sub-interfaces alarm monitor table." ::= { hwModeChannelBandwidthEntry 1 } -- hwModeChannelBandwidthValue 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.2 hwModeChannelBandwidthValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum available bandwidth of the physical interface." ::= { hwModeChannelBandwidthEntry 2 } -- hwModeChannelSubIfBandwidthSum 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.3 hwModeChannelSubIfBandwidthSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total bandwidth of the channelized sub-interfaces on the physical interface." ::= { hwModeChannelBandwidthEntry 3 } -- hwModeChannelIfName 1.3.6.1.4.1.2011.5.25.41.1.25.1.1.4 hwModeChannelIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of physical interface." ::= { hwModeChannelBandwidthEntry 4 } END -- -- HUAWEI-IF-EXT-MIB.my --