-- ============================================================================ -- Copyright (C) 2003 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- DESCRIPTION: HUAWEI-IPPOOL-MIB -- Reference: -- Version: V3.00 -- History: -- -- ============================================================================ HUAWEI-IPPOOL-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB IpAddress, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC; hwIPpool MODULE-IDENTITY LAST-UPDATED "200408300900Z" ORGANIZATION "Fix-Net Dept, Huawei Technologies Co.,Ltd." CONTACT-INFO "Floor 5, Block 4, R&D Building, Huawei Longgang Production Base, Shenzhen, P.R.C. http://www.huawei.com ZIP:518057 " DESCRIPTION "The MIB contains objects of module IPPOOL." ::= { huaweiUtility 8 } hwIPPoolMibObjects OBJECT IDENTIFIER ::= { hwIPpool 1 } hwIPPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Config-list of IP address pool." ::= { hwIPPoolMibObjects 1 } hwIPPoolEntry OBJECT-TYPE SYNTAX HwIPPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address pool entry. Config-list of IP address pool, used to configure the relevant attributes of the IP address pool inside the device. Used by the AAA module and DHCP module to allocate IP address. The index is node HwIPPoolIndex." INDEX { hwIPPoolIndex } ::= { hwIPPoolTable 1 } HwIPPoolEntry ::= SEQUENCE { hwIPPoolIndex Integer32, hwIPPoolName DisplayString, hwIPPoolRouterIPAddr IpAddress, hwIPPoolRouterIPMask IpAddress, hwIPPoolPriDNSIPAddr IpAddress, hwIPPoolSecDNSIPAddr IpAddress, hwIPPoolPriNBNSIPAddr IpAddress, hwIPPoolSecNBNSIPAddr IpAddress, hwIPPoolIPAddrLease Integer32, hwIPPoolStatus RowStatus, hwIPPoolVPNInstance DisplayString, hwIPPoolType INTEGER, hwIPPoolNetwork IpAddress, hwIPPoolNetworkMask IpAddress, hwIPPoolIPTotalNum Integer32, hwIPPoolIPUsedNum Integer32, hwIPPoolIPConflictNum Integer32, hwIPPoolIPExcludeNum Integer32, hwIPPoolIPIdleNum Integer32, hwIPPoolIPUsedPercent Integer32 } hwIPPoolIndex OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Exclusive index of address pool." ::= { hwIPPoolEntry 1 } hwIPPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..35)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP address pool name, the service module guarantees the exclusiveness of the name." ::= { hwIPPoolEntry 2 } hwIPPoolRouterIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gateway IP address. By default, the mask is 255.255.255.255." ::= { hwIPPoolEntry 3 } hwIPPoolRouterIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Gateway mask. By default, the mask is 255.255.255.255." ::= { hwIPPoolEntry 4 } hwIPPoolPriDNSIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Primary DNS IP address. By default, it is 255.255.255.255." ::= { hwIPPoolEntry 5 } hwIPPoolSecDNSIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Second DNS IP address. By default, it is 255.255.255.255." ::= { hwIPPoolEntry 6 } hwIPPoolPriNBNSIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Primary Netbios IP address. By default, it is 255.255.255.255." ::= { hwIPPoolEntry 7 } hwIPPoolSecNBNSIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Second Netbios IP address. By default, it is 255.255.255.255." ::= { hwIPPoolEntry 8 } hwIPPoolIPAddrLease OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "IP address lease: 0~(1000*24*60-1)(m) unit: minute. It is allowed not to specify the lease during the adding. The default value is 3*24*60(m)." ::= { hwIPPoolEntry 9 } hwIPPoolStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row admin status, either Add or Del. Supports adding and deletion." ::= { hwIPPoolEntry 10 } hwIPPoolVPNInstance OBJECT-TYPE SYNTAX DisplayString(SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP vpn-instance name." ::= { hwIPPoolEntry 11 } hwIPPoolType OBJECT-TYPE SYNTAX INTEGER {local(1),relay(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Value indicates the type of pool, 1--local, 2--relay." ::= { hwIPPoolEntry 12 } hwIPPoolNetwork OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Network ip address of a DHCP Server global pool. To delete a configured network ip, please set hwDHCPSGlobalPoolConfigUndoFlag to 1" ::= { hwIPPoolEntry 13 } hwIPPoolNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Net mask of a DHCP Server global pool(network). The SET operation to this object ought to be with the SET of hwDHCPSGlobalPoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation. When a network ip of a DHCP server global pool was deleted, the net mask would also be deleted automatically, and no further operation needed" ::= { hwIPPoolEntry 14 } hwIPPoolIPTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the number of total addresses." ::= { hwIPPoolEntry 15 } hwIPPoolIPUsedNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the number of used addresses." ::= { hwIPPoolEntry 16 } hwIPPoolIPConflictNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the number of conflict addresses." ::= { hwIPPoolEntry 17 } hwIPPoolIPExcludeNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the number of exclude addresses." ::= { hwIPPoolEntry 18 } hwIPPoolIPIdleNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "the number of idle addresses." ::= { hwIPPoolEntry 19 } hwIPPoolIPUsedPercent OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "used percent." ::= { hwIPPoolEntry 20 } hwIPSectionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Config-list of IP section." ::= { hwIPPoolMibObjects 2 } hwIPSectionEntry OBJECT-TYPE SYNTAX HwIPSectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPSection Entry. IP section configuration table, used to manage the IP address of user. There are at most eight address sections to each address pool. Its indexes are hwIPPoolIndex (from the external) and HwIPSectionIndex." INDEX { hwIPPoolIndex, hwIPSectionIndex } ::= { hwIPSectionTable 1 } HwIPSectionEntry ::= SEQUENCE { hwIPSectionIndex Integer32, hwIPSectionDesc DisplayString, hwIPSectionLowAddr IpAddress, hwIPSectionHighAddr IpAddress, hwIPSectionLength Integer32, hwIPSectionUsedNum Integer32, hwIPSectionConflict Integer32, hwIPSectionInvalid Integer32, hwIPSectionAvailableNum Integer32, hwIPSectionRowStatus RowStatus } hwIPSectionIndex OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of address section." ::= { hwIPSectionEntry 1 } hwIPSectionDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP section DESCRIPTION, which can be empty." ::= { hwIPSectionEntry 2 } hwIPSectionLowAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Start of address." ::= { hwIPSectionEntry 3 } hwIPSectionHighAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "End of address." ::= { hwIPSectionEntry 4 } hwIPSectionLength OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "IP section's length." ::= { hwIPSectionEntry 5 } hwIPSectionUsedNum OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Used addresses." ::= { hwIPSectionEntry 6 } hwIPSectionConflict OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of conflict addresses." ::= { hwIPSectionEntry 7 } hwIPSectionInvalid OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid addresses." ::= { hwIPSectionEntry 8 } hwIPSectionAvailableNum OBJECT-TYPE SYNTAX Integer32 (0..65536) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of available addresses." ::= { hwIPSectionEntry 9 } hwIPSectionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row admin status, either Add or Del." ::= { hwIPSectionEntry 10 } hwIPPoolExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPPoolExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extend table of the local address pool. When IP addresses are allocated by the built-in DHCP servers, you need to configure the lease and option." ::= { hwIPPoolMibObjects 3 } hwIPPoolExtEntry OBJECT-TYPE SYNTAX HwIPPoolExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DESCRIPTION." INDEX { hwIPPoolIndex } ::= { hwIPPoolExtTable 1 } HwIPPoolExtEntry ::= SEQUENCE { hwIPPoolAvailableStatus Integer32, hwIPDhcpOptionId1 Integer32, hwIPDhcpOption1 DisplayString, hwIPDhcpOptionId2 Integer32, hwIPDhcpOption2 DisplayString, hwIPDhcpOptionId3 Integer32, hwIPDhcpOption3 DisplayString, hwIPDhcpOptionId4 Integer32, hwIPDhcpOption4 DisplayString, hwIPDnsSuffix DisplayString } hwIPPoolAvailableStatus OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the address is prohibited." ::= { hwIPPoolExtEntry 1 } hwIPDhcpOptionId1 OBJECT-TYPE SYNTAX Integer32 (128..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier." ::= { hwIPPoolExtEntry 2 } hwIPDhcpOption1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the option." ::= { hwIPPoolExtEntry 3 } hwIPDhcpOptionId2 OBJECT-TYPE SYNTAX Integer32 (128..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier." ::= { hwIPPoolExtEntry 4 } hwIPDhcpOption2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the option." ::= { hwIPPoolExtEntry 5 } hwIPDhcpOptionId3 OBJECT-TYPE SYNTAX Integer32 (128..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier." ::= { hwIPPoolExtEntry 6 } hwIPDhcpOption3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the option." ::= { hwIPPoolExtEntry 7 } hwIPDhcpOptionId4 OBJECT-TYPE SYNTAX Integer32 (128..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Option ID. When IP addresses are allocated by the built-in DHCP sever, the option is a configuration parameter, which needs to be defined and explained by the carrier." ::= { hwIPPoolExtEntry 8 } hwIPDhcpOption4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the option." ::= { hwIPPoolExtEntry 9 } hwIPDnsSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS suffix, a string of 0-32 characters. If the value is 0, it indicates that the suffix is deleted." ::= { hwIPPoolExtEntry 10 } hwIPAddressStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPAddressStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address status table. It supports the query and setting of status of the local address pool. It does not support the query and setting of status of the remote address pool for the following reasons: 1. The status of the remote address pool cannot be set. 2. The remote and local address pools map different status tables, with different indexes. 3. The remote address pool is managed by the remote equipment, rather than the local equipment. The local equipment displays only the approximate status of the remote address pool." ::= { hwIPPoolMibObjects 4 } hwIPAddressStatusEntry OBJECT-TYPE SYNTAX HwIPAddressStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DESCRIPTION." INDEX { hwIPPoolIndex, hwIPSectionIndex, hwIPAddress } ::= { hwIPAddressStatusTable 1 } HwIPAddressStatusEntry ::= SEQUENCE { hwIPAddress IpAddress, hwIPAddressStatus INTEGER , hwPoolName DisplayString } hwIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address." ::= { hwIPAddressStatusEntry 1 } hwIPAddressStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), occupied(1), prohibitive(2), conflictive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the address." ::= { hwIPAddressStatusEntry 2 } hwPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "IP address pool name." ::= { hwIPAddressStatusEntry 3 } hwDhcpSvrGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDhcpSvrGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of the DHCP server group. To monitor the status of the remote DHCP server, you need to configure the local DHCP server. You can configure a maximum of 4094 DHCP server groups. Each server group consists of two DHCP servers. Select the server based on the server status." ::= { hwIPPoolMibObjects 5 } hwDhcpSvrGroupEntry OBJECT-TYPE SYNTAX HwDhcpSvrGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DESCRIPTION." INDEX { hwIPPoolDhcpSvrGroupIndex } ::= { hwDhcpSvrGroupTable 1 } HwDhcpSvrGroupEntry ::= SEQUENCE { hwIPPoolDhcpSvrGroupIndex Integer32, hwIPPoolDhcpSvrGroupName DisplayString, hwIPDhcpSvrPriAddr IpAddress, hwIPDhcpSvrScdiAddr IpAddress, hwIPDhcpSvrPriState INTEGER, hwIPDhcpScdPriState INTEGER, hwIPDhcpSvrAutoRelease TruthValue, hwIPDhcpSvrRefCount Integer32, hwIPDhcpSvrRowStatus RowStatus, hwIPDhcpSvrPriVpnInstance DisplayString, hwIPDhcpSvrScdVpnInstance DisplayString } hwIPPoolDhcpSvrGroupIndex OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of a DHCP server group. When you create an address pool, the equipment adds the hwIPPoolDhcpSvrGroupIndex entry by default and sends it to the NMS." ::= { hwDhcpSvrGroupEntry 1 } hwIPPoolDhcpSvrGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the DHCP server group." ::= { hwDhcpSvrGroupEntry 2 } hwIPDhcpSvrPriAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary IP address of the DHCP server group." ::= { hwDhcpSvrGroupEntry 3 } hwIPDhcpSvrScdiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary IP address of the DHCP server group." ::= { hwDhcpSvrGroupEntry 4 } hwIPDhcpSvrPriState OBJECT-TYPE SYNTAX INTEGER { stop(0), use(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the primary DHCP server." ::= { hwDhcpSvrGroupEntry 5 } hwIPDhcpScdPriState OBJECT-TYPE SYNTAX INTEGER { stop(0), use(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the secondary DHCP server." ::= { hwDhcpSvrGroupEntry 6 } hwIPDhcpSvrAutoRelease OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the server supports the Release packet." ::= { hwDhcpSvrGroupEntry 7 } hwIPDhcpSvrRefCount OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the server group is referenced." ::= { hwDhcpSvrGroupEntry 8 } hwIPDhcpSvrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "DHCP server rowstatus." ::= { hwDhcpSvrGroupEntry 9 } hwIPDhcpSvrPriVpnInstance OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "VPN instance of the primary DHCP server." ::= { hwDhcpSvrGroupEntry 10 } hwIPDhcpSvrScdVpnInstance OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "VPN instance of the secondary DHCP server." ::= { hwDhcpSvrGroupEntry 11 } hwRemotePoolTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRemotePoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of the remote address pool. The remote address pool must be configured on the local equipment in the following cases: Users obtain IP addresses through the built-in DHCP client and need to renew the addresses. The equipment needs to record the IP addresses to be renewed. The equipment needs to report the routes of the users." ::= { hwIPPoolMibObjects 6 } hwRemotePoolEntry OBJECT-TYPE SYNTAX HwRemotePoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DESCRIPTION." INDEX { hwRemoteIPPoolIndex } ::= { hwRemotePoolTable 1 } HwRemotePoolEntry ::= SEQUENCE { hwRemoteIPPoolIndex Integer32, hwRemoteIPPoolName DisplayString, hwRemoteIPPoolRouterIPAddr IpAddress, hwRemoteIPPoolRouterIPMask IpAddress, hwRemoteIPPoolDhcpSvrGroupID Integer32, hwRemoteIPPoolAvailableStatus INTEGER, hwRemoteIPPoolRowStatus RowStatus, hwRemoteIPPoolPriDNSIPAddress IpAddress, hwRemoteIPPoolSecDNSIPAddress IpAddress, hwRemoteIPPoolPriNBNSIPAddress IpAddress, hwRemoteIPPoolSecNBNSIPAddress IpAddress, hwRemoteIPPoolVPNInstance DisplayString, hwRemoteIPPoolDhcpGroupName DisplayString } hwRemoteIPPoolIndex OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of an address pool. When you create an address pool, the equipment adds the hwRemoteIPPoolIndex x entry by default and sends it the NMS. " ::= { hwRemotePoolEntry 1 } hwRemoteIPPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of an address pool. The service module ensures that the name is unique." ::= { hwRemotePoolEntry 2 } hwRemoteIPPoolRouterIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the gateway." ::= { hwRemotePoolEntry 3 } hwRemoteIPPoolRouterIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address mask." ::= { hwRemotePoolEntry 4 } hwRemoteIPPoolDhcpSvrGroupID OBJECT-TYPE SYNTAX Integer32 (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the associated DHCP server group." ::= { hwRemotePoolEntry 5 } hwRemoteIPPoolAvailableStatus OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the address pool is locked, 0: locked, 1: not locked." ::= { hwRemotePoolEntry 6 } hwRemoteIPPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Row status of IP pool. " ::= { hwRemotePoolEntry 7 } hwRemoteIPPoolPriDNSIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the active DNS server." ::= { hwRemotePoolEntry 8 } hwRemoteIPPoolSecDNSIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the standby DNS server." ::= { hwRemotePoolEntry 9 } hwRemoteIPPoolPriNBNSIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the active NBNS server." ::= { hwRemotePoolEntry 10 } hwRemoteIPPoolSecNBNSIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the standby NBNS server." ::= { hwRemotePoolEntry 11 } hwRemoteIPPoolVPNInstance OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "IP vpn-instance name." ::= { hwRemotePoolEntry 12 } hwRemoteIPPoolDhcpGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Dhcp server group name." ::= { hwRemotePoolEntry 13 } --Statistics of address pool usage hwIPPoolStatistic OBJECT IDENTIFIER ::= { hwIPPoolMibObjects 7 } hwIPPoolNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured addresses pools." ::= { hwIPPoolStatistic 1 } hwIPIdleTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of idle addresses on the equipment." ::= { hwIPPoolStatistic 2 } hwIPUsedTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of addresses in use on the equipment." ::= { hwIPPoolStatistic 3 } hwIPConflictTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of conflicting addresses on the equipment." ::= { hwIPPoolStatistic 4 } hwIPExcludeTotalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of excluded addresses on the equipment." ::= { hwIPPoolStatistic 5 } hwIPPoolMibTrap OBJECT IDENTIFIER ::= { hwIPpool 2 } hwIPPoolTrapOid OBJECT IDENTIFIER ::= { hwIPPoolMibTrap 1 } hwUserIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of the user." ::= { hwIPPoolTrapOid 1 } hwDHCPServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of the DHCP server." ::= { hwIPPoolTrapOid 2 } hwDhcpSvrVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "DHCP VPN instance name." ::= { hwIPPoolTrapOid 3 } hwIPPoolTrapsDefine OBJECT IDENTIFIER ::= { hwIPPoolMibTrap 2 } hwIPPoolTraps OBJECT IDENTIFIER ::= { hwIPPoolTrapsDefine 0 } hwUserIPConflictAlarm NOTIFICATION-TYPE OBJECTS { hwUserIPAddress,hwIPPoolName} STATUS current DESCRIPTION " 1 Notice/Trap name: IP address conflict error. 2 Notice/Trap generation cause: user IP address conflict. 3 Repair suggestions: Check whether to renew configuring the BAS IP pool. Check whether the IP address of BAS interface conflicts user IP address." ::= { hwIPPoolTraps 1 } hwUserIPLeaseAlarm NOTIFICATION-TYPE OBJECTS { hwUserIPAddress } STATUS current DESCRIPTION " 1 Notice/Trap name: IP address lease alarm. 2 Notice/Trap generation cause: The user IP lease is over. 3 Repair suggestion: Check whether to renew configuring BAS IP pool." ::= { hwIPPoolTraps 2 } hwAllocUserIPFailAlarm NOTIFICATION-TYPE OBJECTS { hwIPPoolIndex,hwIPPoolName } STATUS current DESCRIPTION " 1 Notice/Trap name: allocate user IP fail alarm. 2 Notice/Trap generation cause: there are no enough IP addresses for users. 3 Repair suggestion: Check whether there are enough addresses in IP pool of the domain." ::= { hwIPPoolTraps 3 } hwDhcpServerDown NOTIFICATION-TYPE OBJECTS { hwDHCPServerAddr, hwRemoteIPPoolRouterIPAddr,hwDhcpSvrVrfName} STATUS current DESCRIPTION " Description: The DHCP server does not respond. This alarm is generated if the network is unstable, the DHCP server is Down, or there is not any available address in the DHCP server when a user applies for an address to the external DHCP server. Parameter: IP address of the DHCP server, address pool that the user expects (the address pool is identified by the gateway address because there may be multiple address pools on a server), VPN instance name. " ::= { hwIPPoolTraps 4 } hwLocalIPPoolDifferWithServer NOTIFICATION-TYPE OBJECTS { hwRemoteIPPoolName } STATUS current DESCRIPTION " The configuration of the IP address pool on the DHCP server is not the same as the configuration of the remote address pool on the local equipment. Solution: Check whether the configuration of the IP address pool on the DHCP server, including the gateway address, mask, and the address range, is the same as the configuration of the remote address pool on the local equipment. " ::= { hwIPPoolTraps 5 } -- ============== conformance information ============== hwIpPoolMIBConformance OBJECT IDENTIFIER ::= { hwIPpool 3 } hwIpPoolCompliances OBJECT IDENTIFIER ::= { hwIpPoolMIBConformance 1 } hwIpPoolCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting this module." MODULE -- this module MANDATORY-GROUPS { hwIpPoolTableGroup, hwIpSectionTableGroup, hwIpPoolExtTableGroup, hwIpAddressStatusTableGroup, hwDhcpSvrGroupTableGroup, hwRemotePoolTableGroup, hwIpPoolStatisticGroup, hwIpPoolTrapOidGroup, hwIpPoolTrapsGroup} ::= { hwIpPoolCompliances 1 } -- ============== groups ============== hwIpPoolObjectGroups OBJECT IDENTIFIER ::= { hwIpPoolMIBConformance 2 } hwIpPoolTableGroup OBJECT-GROUP OBJECTS { hwIPPoolIndex, hwIPPoolName, hwIPPoolRouterIPAddr, hwIPPoolRouterIPMask, hwIPPoolPriDNSIPAddr, hwIPPoolSecDNSIPAddr, hwIPPoolPriNBNSIPAddr, hwIPPoolSecNBNSIPAddr, hwIPPoolIPAddrLease, hwIPPoolStatus, hwIPPoolVPNInstance, hwIPPoolType, hwIPPoolNetwork, hwIPPoolNetworkMask, hwIPPoolIPTotalNum, hwIPPoolIPUsedNum, hwIPPoolIPConflictNum, hwIPPoolIPExcludeNum, hwIPPoolIPIdleNum, hwIPPoolIPUsedPercent } STATUS current DESCRIPTION "The huawei IP pool configuration group." ::= { hwIpPoolObjectGroups 1 } hwIpSectionTableGroup OBJECT-GROUP OBJECTS {hwIPSectionIndex, hwIPSectionDesc, hwIPSectionLowAddr, hwIPSectionHighAddr, hwIPSectionLength, hwIPSectionUsedNum, hwIPSectionConflict, hwIPSectionInvalid, hwIPSectionAvailableNum, hwIPSectionRowStatus } STATUS current DESCRIPTION "The huawei IP section configuration group." ::= { hwIpPoolObjectGroups 2 } hwIpPoolExtTableGroup OBJECT-GROUP OBJECTS {hwIPPoolAvailableStatus, hwIPDhcpOptionId1, hwIPDhcpOption1, hwIPDhcpOptionId2, hwIPDhcpOption2, hwIPDhcpOptionId3, hwIPDhcpOption3, hwIPDhcpOptionId4, hwIPDhcpOption4, hwIPDnsSuffix } STATUS current DESCRIPTION "The huawei IP pool extension configuration group." ::= { hwIpPoolObjectGroups 3 } hwIpAddressStatusTableGroup OBJECT-GROUP OBJECTS {hwIPAddress, hwIPAddressStatus, hwPoolName } STATUS current DESCRIPTION "The huawei IP address status configuration group." ::= { hwIpPoolObjectGroups 4 } hwDhcpSvrGroupTableGroup OBJECT-GROUP OBJECTS {hwIPPoolDhcpSvrGroupIndex, hwIPPoolDhcpSvrGroupName, hwIPDhcpSvrPriAddr, hwIPDhcpSvrScdiAddr, hwIPDhcpSvrPriState, hwIPDhcpScdPriState, hwIPDhcpSvrAutoRelease, hwIPDhcpSvrRefCount, hwIPDhcpSvrRowStatus, hwIPDhcpSvrPriVpnInstance, hwIPDhcpSvrScdVpnInstance } STATUS current DESCRIPTION "The huawei DHCP service group configuration group." ::= { hwIpPoolObjectGroups 5 } hwRemotePoolTableGroup OBJECT-GROUP OBJECTS {hwRemoteIPPoolIndex, hwRemoteIPPoolName, hwRemoteIPPoolRouterIPAddr, hwRemoteIPPoolRouterIPMask, hwRemoteIPPoolDhcpSvrGroupID, hwRemoteIPPoolAvailableStatus, hwRemoteIPPoolRowStatus, hwRemoteIPPoolPriDNSIPAddress, hwRemoteIPPoolSecDNSIPAddress, hwRemoteIPPoolPriNBNSIPAddress, hwRemoteIPPoolSecNBNSIPAddress, hwRemoteIPPoolVPNInstance, hwRemoteIPPoolDhcpGroupName } STATUS current DESCRIPTION "The huawei remote pool configuration group." ::= { hwIpPoolObjectGroups 6 } hwIpPoolStatisticGroup OBJECT-GROUP OBJECTS {hwIPPoolNum, hwIPIdleTotalNum, hwIPUsedTotalNum, hwIPConflictTotalNum, hwIPExcludeTotalNum } STATUS current DESCRIPTION "The huawei IP pool statistics group." ::= { hwIpPoolObjectGroups 7 } hwIpPoolTrapOidGroup OBJECT-GROUP OBJECTS {hwUserIPAddress, hwDHCPServerAddr, hwDhcpSvrVrfName } STATUS current DESCRIPTION "The huawei IP pool trap OID group." ::= { hwIpPoolObjectGroups 8 } hwIpPoolTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwUserIPConflictAlarm, hwUserIPLeaseAlarm, hwAllocUserIPFailAlarm, hwDhcpServerDown, hwLocalIPPoolDifferWithServer } STATUS current DESCRIPTION "The huawei IP pool traps group." ::= { hwIpPoolObjectGroups 9 } END