-- ================================================================================= -- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved -- -- Description: This mib file is used for configuration of MINM -- information. -- Reference: -- Version: V1.0 -- History: -- V1.0 wuchunqiang 60020627, 2006.10.30, publish -- pengpeng 60021576,2006.10.30 -- yuwei 43165, 2006.11.15 -- xiebojie 60021221 ,2007.05.22 -- zhangyinjuan 64060, 2008.06.18 -- ================================================================================= HUAWEI-MINM-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB InterfaceIndex FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI MacAddress, RowStatus, TruthValue, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC VlanIdOrNone, VlanId FROM Q-BRIDGE-MIB -- [RFC4363] AddressFamilyNumbers FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB TransportDomain,TransportAddress FROM TRANSPORT-ADDRESS-MIB -- [RFC3419] VlanList FROM HUAWEI-L2IF-MIB InterfaceIndexOrZero FROM IF-MIB; hwMinMMIB MODULE-IDENTITY LAST-UPDATED "200611230000Z" -- November 23, 2006 at 00:00 GMT ORGANIZATION "Huawei Technologies Co., Ltd." CONTACT-INFO "R&D Beijing, Huawei Technologies Co., Ltd. Huawei Bld., NO.3 Xinxi Rd, Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip: 100085 Http://www.huawei.com E-mail:support@huawei.com" DESCRIPTION "The HUAWEI-MINM-MIB contains objects to Manage configuration for MINM feature. " ::= { hwMINM 1 } -- -- type definitions -- HWAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the administration status as follows: up(1), down(2) " SYNTAX INTEGER { up(1), down(2) } HWOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the operation status as follows: up(1), down(2) " SYNTAX INTEGER { up(1), down(2) } HwDot1agCfmCcmInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(1) No CCMs are sent (disabled). interval300Hz(2) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(3) CCMs are sent every 10 milliseconds. interval100ms(4) CCMs are sent every 100 milliseconds. interval1s(5) CCMs are sent every 1 second. interval10s(6) CCMs are sent every 10 seconds. interval1min(7) CCMs are sent every minute. interval10min(8) CCMs are sent every 10 minutes. interval20ms(9) CCMs are sent every 10 milliseconds. interval30ms(10) CCMs are sent every 10 milliseconds. interval50ms(11) CCMs are sent every 10 milliseconds. Note: enumerations start at zero to match the 'CCM Interval field' protocol field. " SYNTAX INTEGER { intervalInvalid(1), interval300Hz(2), interval10ms(3), interval100ms(4), interval1s(5), interval10s(6), interval1min(7), interval10min(8), interval20ms(9), interval30ms(10), interval50ms(11) } HwDot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the possible values the Relay action field can take." REFERENCE "802.1ag clauses 12.14.7.5.3 g), 20.32.2.5, and Table 21-24. RlyHit(1) The LTM reached an MP whose MAC address matches the target MAC address. RlyFDB(2) The Egress Port was determined by consulting the Filtering Database(20.41.1.1:a). RlyMPDB(3) The Egress Port was determined by consulting the MIP CCM Database(20.41.1.1:b). " SYNTAX INTEGER { rlyHit(1), rlyFdb(2), rlyMpdb(3) } HwLldpChassisIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value." SYNTAX INTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) } HwLldpChassisId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID." SYNTAX OCTET STRING (SIZE (1..255)) HwLldpPortIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The enumeration 'portComponent(2)' represents a port identifier based on the value of entPhysicalAlias (defined in IETF RFC 2737) for a port component (i.e., entPhysicalClass value of 'port(10)'), within the containing chassis. The enumeration 'macAddress(3)' represents a port identifier based on a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), which has been detected by the agent and associated with a particular port (IEEE Std 802-2001). The enumeration 'networkAddress(4)' represents a port identifier based on a network address, detected by the agent and associated with a particular port. The enumeration 'interfaceName(5)' represents a port identifier based on the ifName MIB object, defined in IETF RFC 2863. The enumeration 'agentCircuitId(6)' represents a port identifier based on the agent-local identifier of the circuit (defined in RFC 3046), detected by the agent and associated with a particular port. The enumeration 'local(7)' represents a port identifier based on a value locally assigned." SYNTAX INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } HwLldpPortId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID." SYNTAX OCTET STRING (SIZE (1..255)) HwLldpManAddrIfSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' represents interface identifier based on the ifIndex MIB object. The enumeration 'systemPortNumber(3)' represents interface identifier based on the system port numbering convention." REFERENCE "IEEE 802.1AB-2005 9.5.9.5" SYNTAX INTEGER { unknown(1), ifIndex(2), systemPortNumber(3) } HwLldpManAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such as SNMP engineId, may be required to access the LLDP agent using a management address. These necessary credentials should be known by the network management and the objects associated with the credentials are not included in the LLDP agent." SYNTAX OCTET STRING (SIZE (1..31)) HwDot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the ingress action field." REFERENCE "802.1ag clauses 12.14.7.5.3 k), 21.9.9.1, 20.35.2.6 and Table 21-26. " SYNTAX INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) } HwDot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the egress action field" REFERENCE "802.1ag clauses 12.14.7.5.3 o), 21.9.10.1 and Table 21-28" SYNTAX INTEGER { egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } HWApsInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Indicates the time interval for fast sending of Aps packets described in the G.8031. By default, it is 3.3 ms. Optional values for sending interval are as follows: apsInterval3dot3ms(1): indicates a sending interval of 3.3 ms. apsInterval5ms(2): indicates a sending interval of 5 ms. apsInterval10ms(3): indicates a sending interval of 10 ms. apsInterval15ms(4): indicates a sending interval of 15 ms. apsInterval20ms(5): indicates a sending interval of 20 ms. apsInterval30ms(6): indicates a sending interval of 30 ms. " SYNTAX INTEGER { apsInterval3dot3ms(1), apsInterval5ms(2), apsInterval10ms(3), apsInterval15ms(4), apsInterval20ms(5), apsInterval30ms(6) } HWProtectMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels. oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end onetoone(3): 1:1 protection mode By the default, the 1:1 protection mode is used. " SYNTAX INTEGER { onePlusOneBidirectional(1), onePlusOneUnidirectional(2), oneToOne(3) } HWSwitchOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the switchover commands for the Aps protection group of mac-tunnels. The priority levels in a descending order are: clear, lock, force and manual. clear(1): clears the lock, force and manual commands, and WTR state on the local end. After the local commands are cleared, the WTR state cannot be entered. lock(2): locks the services on the working tunnel. force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state. manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state. null(5):there is not manual commands. " SYNTAX INTEGER { clear(1), lock(2), force(3), manual(4), null(5) } HWProtectProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the protection protocol of the protection group of mac-tunnels. protocolAps(1): use an APS protocol to enhance the protection switching. protocolOam(2): not using any APS protocol to enhance the protection switching. By the default, the Protocol OAM is used. " SYNTAX INTEGER { protocolAps(1), protocolOam(2) } HWServiceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the type of a service instance as follows: p2p(1): indicates the type of a point-to-point service instance. mp2mp(2): indicates the type of a multi-point to multi-point service instance. By default, the service type is mp2mp. " SYNTAX INTEGER { p2p(1), mp2mp(2) } HWInterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the interface type of a service instance. The encApsulation mapping modes of the service instance can be configured as follows: transparent(1): indicates the transparent transmission mode. oneToOne(2): indicates the one-to-one in the s-tagged mode. bundling(3): indicates the bundling in the s-tagged mode. By default, the s-tagged bundling mode is used. " SYNTAX INTEGER { transparent(1), oneToOne(2), bundling(3) } HWProcessBehavior ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the processing behavior of packets as follows: discard(1), forward(2) " SYNTAX INTEGER { discard(1), forward(2) } HWStaticMacFwdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Indicates the type of the static MAC forwarding table of a service instance: static(1): indicates a static entry. blackhole(2): indicates a blackhole entry. " SYNTAX INTEGER { static(1), blackhole(2) } HwDot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Indicates the Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that no MEPID is configured in a given Maintenance Association point. Whenever an object is defined with this SYNTAX, then the DESCRIPTION clause of such an object MUST specify what the special value of 0 means. " SYNTAX Unsigned32 (0 | 1..8191) -- -- end of type definitions -- -- -- Node definitions -- hwMINM OBJECT IDENTIFIER ::= { hwDatacomm 133 } hwMinMObjects OBJECT IDENTIFIER ::= { hwMinMMIB 1 } hwMinMSystemObjects OBJECT IDENTIFIER ::= { hwMinMObjects 1 } hwMinMVirtualMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the virtual MAC address of the device. By default, there is no virtual MAC address." ::= { hwMinMSystemObjects 1 } hwMinMMacTnlBVlanListLow OBJECT-TYPE SYNTAX VlanList (SIZE(256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the starting value of the backbone VLAN that is assigned to the mac-tunnel." ::= { hwMinMSystemObjects 2 } hwMinMMacTnlBVlanListHigh OBJECT-TYPE SYNTAX VlanList (SIZE(256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ending value of the backbone VLAN that is assigned to the mac-tunnel." ::= { hwMinMSystemObjects 3 } hwMinMTrapEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the Snmp-Agent Trap is enabled on the Mac-in-Mac.By default, it is disable." DEFVAL { 2 } ::= { hwMinMSystemObjects 4 } hwMinMMacTnlObjects OBJECT IDENTIFIER ::= { hwMinMObjects 2 } hwMinMMacTnlCfgObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 1 } hwMinMMacTnlIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Index of the Next Mac Tunnel.It begins with one." ::= { hwMinMMacTnlCfgObjects 1 } hwMinMMacTnlCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a configuration information table of Mac-tunnel." ::= { hwMinMMacTnlCfgObjects 2 } hwMinMMacTnlCfgEntry OBJECT-TYPE SYNTAX HwMinMMacTnlCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the entry in the tunnel configuration table of the mac-tunnel." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlCfgTable 1 } HwMinMMacTnlCfgEntry ::= SEQUENCE { hwMinMMacTnlIndex Unsigned32, hwMinMMacTnlName OCTET STRING, hwMinMMacTnlDMac MacAddress, hwMinMMacTnlBVlanID VlanIdOrNone, hwMinMMacTnlBVlanType OCTET STRING, hwMinMMacTnlPriorityValue Integer32, hwMinMMacTnlOutgoingIfIndex InterfaceIndexOrZero, hwMinMMacTnlSplitHorizonEnable EnabledStatus, hwMinMMacTnlAdminStatus HWAdminStatus, hwMinMMacTnlOperStatus HWOperStatus, hwMinMMacTnlDescription OCTET STRING, hwMinMMacTnlStatisticsReset EnabledStatus, hwMinMMacTnlPriorityTrustITag TruthValue, hwMinMMacTnlDeiTrustIDei TruthValue, hwMinMMacTnlDeiValue Integer32, hwMinMMacTnlRowStatus RowStatus } hwMinMMacTnlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of Mac Tunnel. It begins with one." ::= { hwMinMMacTnlCfgEntry 1 } hwMinMMacTnlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte." ::= { hwMinMMacTnlCfgEntry 11 } hwMinMMacTnlDMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the remote MAC address of the current mac-tunnel. By default, there is no such configuration." ::= { hwMinMMacTnlCfgEntry 12 } hwMinMMacTnlBVlanID OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured. The VLAN here must have been created and be in the backbone VLAN used by the mac-tunnel. The special value of zero is used to indicate that no VLAN-ID is present or used. " ::= { hwMinMMacTnlCfgEntry 13 } hwMinMMacTnlBVlanType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the B-TAG type of the BVLAN. By default, it is 88a8. " ::= { hwMinMMacTnlCfgEntry 14 } hwMinMMacTnlPriorityValue OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates priority level of the mac-tunnel. It is used to set the priority field of B-TAG. There are eight priority levels. By default, the I-TAG priority is used. The special value of eight is used to indicate that priority was unknown or none. " ::= { hwMinMMacTnlCfgEntry 15 } hwMinMMacTnlOutgoingIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the port used in the mac-tunnel. By default, it is not configured. The value zero is used to indicate that interface was unknown or none." ::= { hwMinMMacTnlCfgEntry 16 } hwMinMMacTnlSplitHorizonEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the split horizon of tunnels. By default, it is enabled. When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets. " ::= { hwMinMMacTnlCfgEntry 17 } hwMinMMacTnlAdminStatus OBJECT-TYPE SYNTAX HWAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the administration status of the mac-tunnel." ::= { hwMinMMacTnlCfgEntry 18 } hwMinMMacTnlOperStatus OBJECT-TYPE SYNTAX HWOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical state of the mac-tunnel." ::= { hwMinMMacTnlCfgEntry 19 } hwMinMMacTnlDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates descriptive information of the static Mac-In-Mac tunnel. Its length ranges from 1 to 80 bytes and the first byte cannot be a space. " ::= { hwMinMMacTnlCfgEntry 20 } hwMinMMacTnlStatisticsReset OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the reset on traffic statistics of the mac-tunnel." ::= { hwMinMMacTnlCfgEntry 21 } hwMinMMacTnlPriorityTrustITag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the I-TAG priority is copied to the mac-tunnel. By default, the I-TAG priority is not copied to the mac-tunnel." DEFVAL { 2 } ::= { hwMinMMacTnlCfgEntry 22 } hwMinMMacTnlDeiTrustIDei OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the I-DEI priority is copied to the mac-tunnel. By default, the I-DEI priority is not copied to the mac-tunnel." DEFVAL { 2 } ::= { hwMinMMacTnlCfgEntry 23 } hwMinMMacTnlDeiValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG. When DEI is true, the value is set to 1. When DEI is false, the value is set to 0. By default, the I-DEI priority is not copied to the mac-tunnel, and the DEI is false. When the value of the DEI is set to 2, it indicates that no DEI is configured on the tunnel. " DEFVAL { 0 } ::= { hwMinMMacTnlCfgEntry 24 } hwMinMMacTnlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy" ::= { hwMinMMacTnlCfgEntry 51 } hwMinMMacTnlStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel. " ::= { hwMinMMacTnlCfgObjects 3 } hwMinMMacTnlStatisticsEntry OBJECT-TYPE SYNTAX HwMinMMacTnlStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlStatisticsTable 1 } HwMinMMacTnlStatisticsEntry ::= SEQUENCE { hwMinMMacTnlInPackets Counter64, hwMinMMacTnlInBytes Counter64, hwMinMMacTnlOutPackets Counter64, hwMinMMacTnlOutBytes Counter64 } hwMinMMacTnlInPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets received by the mac-tunnel. " ::= { hwMinMMacTnlStatisticsEntry 11 } hwMinMMacTnlInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes received by the mac-tunnel." ::= { hwMinMMacTnlStatisticsEntry 12 } hwMinMMacTnlOutPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent by the mac-tunnel. " ::= { hwMinMMacTnlStatisticsEntry 13 } hwMinMMacTnlOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes sent by the mac-tunnel." ::= { hwMinMMacTnlStatisticsEntry 14 } hwMacTnlNameToIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMacTnlNameToIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping table of the tunnel name and tunnel index." ::= { hwMinMMacTnlCfgObjects 4 } hwMacTnlNameToIndexMappingEntry OBJECT-TYPE SYNTAX HwMacTnlNameToIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mapping table entry of the tunnel name and tunnel index." INDEX { hwMacTnlName } ::= { hwMacTnlNameToIndexMappingTable 1 } HwMacTnlNameToIndexMappingEntry ::= SEQUENCE { hwMacTnlName OCTET STRING, hwMacTnlIndex Unsigned32 } hwMacTnlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. " ::= { hwMacTnlNameToIndexMappingEntry 1 } hwMacTnlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the tunnel index.It begins with one." ::= { hwMacTnlNameToIndexMappingEntry 11 } hwMinMMacTnlOamObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 2 } hwMinMMacTnlCCTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlCCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the parameters used to describe CC packets. " ::= { hwMinMMacTnlOamObjects 1 } hwMinMMacTnlCCEntry OBJECT-TYPE SYNTAX HwMinMMacTnlCCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the CC table entry." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlCCTable 1 } HwMinMMacTnlCCEntry ::= SEQUENCE { hwMinMMacTnlCfmEnable EnabledStatus, hwMinMMacTnlCCInterval HwDot1agCfmCcmInterval, hwMinMMacTnlSomeRMepCcmDefect TruthValue, hwMinMMacTnlSomeRdiDefect TruthValue, hwMinMMacTnlCcReceiveEnabled TruthValue, hwMinMMacTnlCCRowStatus RowStatus } hwMinMMacTnlCfmEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that CFM is enabled." ::= { hwMinMMacTnlCCEntry 11 } hwMinMMacTnlCCInterval OBJECT-TYPE SYNTAX HwDot1agCfmCcmInterval MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the time interval of CC packets." DEFVAL { 3 } ::= { hwMinMMacTnlCCEntry 12 } hwMinMMacTnlSomeRMepCcmDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates a connectivity failure of tunnels." ::= { hwMinMMacTnlCCEntry 13 } hwMinMMacTnlSomeRdiDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RDI packet from the remote end is received." ::= { hwMinMMacTnlCCEntry 14 } hwMinMMacTnlCcReceiveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether CC reception is enabled." ::= { hwMinMMacTnlCCEntry 15 } hwMinMMacTnlCCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status." ::= { hwMinMMacTnlCCEntry 51 } hwMinMMacTnlLbTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the parameters used to describe Lb packets." ::= { hwMinMMacTnlOamObjects 2 } hwMinMMacTnlLbEntry OBJECT-TYPE SYNTAX HwMinMMacTnlLbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the loopback table entry." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlLbTable 1 } HwMinMMacTnlLbEntry ::= SEQUENCE { hwMinMMacTnlLbmEnable EnabledStatus, hwMinMMacTnlLbmTimeStamp TimeStamp, hwMinMMacTnlLbmTimeOut Integer32, hwMinMMacTnlLbmTimes Integer32, hwMinMMacTnlLbmSize Integer32, hwMinMMacTnlLbrIn Counter32, hwMinMMacTnlLbmResult TruthValue, hwMinMMacTnlLbRowStatus RowStatus } hwMinMMacTnlLbmEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates that the MAC Ping is started inside the tunnel. " ::= { hwMinMMacTnlLbEntry 11 } hwMinMMacTnlLbmTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operation time." ::= { hwMinMMacTnlLbEntry 12 } hwMinMMacTnlLbmTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the timeout period entered by a user, in ms. By default, it is 2000." DEFVAL { 2000 } ::= { hwMinMMacTnlLbEntry 13 } hwMinMMacTnlLbmTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the number of times that Ping is entered. " ::= { hwMinMMacTnlLbEntry 14 } hwMinMMacTnlLbmSize OBJECT-TYPE SYNTAX Integer32 (64..1480) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the size of an Lbm packet. " DEFVAL { 64 } ::= { hwMinMMacTnlLbEntry 15 } hwMinMMacTnlLbrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of valid LBR packets received " ::= { hwMinMMacTnlLbEntry 16 } hwMinMMacTnlLbmResult OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Whether the MAC ping operation for a tunnel is over. " ::= { hwMinMMacTnlLbEntry 17 } hwMinMMacTnlLbRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status." ::= { hwMinMMacTnlLbEntry 51 } hwMinMMacTnlLbResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlLbResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Performance statistics returned by using the MAC ping command for a tunnel. " ::= { hwMinMMacTnlOamObjects 3 } hwMinMMacTnlLbResultEntry OBJECT-TYPE SYNTAX HwMinMMacTnlLbResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the loopback table entry." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlLbResultTable 1 } HwMinMMacTnlLbResultEntry ::= SEQUENCE { hwMinMMacTnlMacPingRTTMin Gauge32, hwMinMMacTnlMacPingRTTMax Gauge32, hwMinMMacTnlMacPingRTTAvg Gauge32, hwMinMMacTnlMacPingPacketLossRatio Gauge32 } hwMinMMacTnlMacPingRTTMin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " The minimum round trip time. " ::= { hwMinMMacTnlLbResultEntry 11 } hwMinMMacTnlMacPingRTTMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum round trip time. " ::= { hwMinMMacTnlLbResultEntry 12 } hwMinMMacTnlMacPingRTTAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " The average round trip time. " ::= { hwMinMMacTnlLbResultEntry 13 } hwMinMMacTnlMacPingPacketLossRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " The packet loss ratio. " ::= { hwMinMMacTnlLbResultEntry 14 } hwMinMMacTnlLtmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlLtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the parameters used to describe Ltm packets. " ::= { hwMinMMacTnlOamObjects 4 } hwMinMMacTnlLtmEntry OBJECT-TYPE SYNTAX HwMinMMacTnlLtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the linktrace table entry." INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlLtmTable 1 } HwMinMMacTnlLtmEntry ::= SEQUENCE { hwMinMMacTnlLtmEnable EnabledStatus, hwMinMMacTnlLtmTimeStamp TimeStamp, hwMinMMacTnlLtmTimeOut Integer32, hwMinMMacTnlLtmFlags BITS, hwMinMMacTnlLtmTtl Unsigned32, hwMinMMacTnlLtmSeqNumber Unsigned32, hwMinMMacTnlLtmEgressIdentifier Unsigned32, hwMinMMacTnlLtmResult TruthValue, hwMinMMacTnlLtmRowStatus RowStatus } hwMinMMacTnlLtmEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates that the MAC Trace is started inside the tunnel. " ::= { hwMinMMacTnlLtmEntry 11 } hwMinMMacTnlLtmTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp for enabling the MAC trace operation for a tunnel. " ::= { hwMinMMacTnlLtmEntry 12 } hwMinMMacTnlLtmTimeOut OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the timeout period entered by a user, in ms. By default, it is 2000. " DEFVAL { 2000 } ::= { hwMinMMacTnlLtmEntry 13 } hwMinMMacTnlLtmTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the living cycle of Ltm packets. " DEFVAL { 64 } ::= { hwMinMMacTnlLtmEntry 14 } hwMinMMacTnlLtmFlags OBJECT-TYPE SYNTAX BITS { useFDBonly (0) } MAX-ACCESS read-only STATUS current DESCRIPTION " The flags field of an LTM packet. " DEFVAL { {useFDBonly } } ::= { hwMinMMacTnlLtmEntry 15 } hwMinMMacTnlLtmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The sequence number of an LTM packet. " ::= { hwMinMMacTnlLtmEntry 16 } hwMinMMacTnlLtmEgressIdentifier OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the egress ID of Ltm packets." ::= { hwMinMMacTnlLtmEntry 17 } hwMinMMacTnlLtmResult OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Two conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered. Either condition indicates the completion of an operation. " ::= { hwMinMMacTnlLtmEntry 18 } hwMinMMacTnlLtmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status." ::= { hwMinMMacTnlLtmEntry 51 } hwMinMMacTnlLtrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the parameters used to describe Ltr packets. " ::= { hwMinMMacTnlOamObjects 5 } hwMinMMacTnlLtrEntry OBJECT-TYPE SYNTAX HwMinMMacTnlLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the linktraceRelay table entry." INDEX { hwMinMMacTnlIndex, hwMinMMacTnlLtrSeqNumber, hwMinMMacTnlLtrReceiveOrder } ::= { hwMinMMacTnlLtrTable 1 } HwMinMMacTnlLtrEntry ::= SEQUENCE { hwMinMMacTnlLtrSeqNumber Unsigned32, hwMinMMacTnlLtrReceiveOrder Unsigned32, hwMinMMacTnlLtrTtl Unsigned32, hwMinMMacTnlLtrForwarded TruthValue, hwMinMMacTnlLtrLastEgressIdentifier OCTET STRING, hwMinMMacTnlLtrNextEgressIdentifier OCTET STRING, hwMinMMacTnlLtrRelay HwDot1agCfmRelayActionFieldValue, hwMinMMacTnlLtrIngress HwDot1agCfmIngressActionFieldValue, hwMinMMacTnlLtrIngressMac MacAddress, hwMinMMacTnlLtrIngressPortIdSubtype HwLldpPortIdSubtype, hwMinMMacTnlLtrIngressPortId HwLldpPortId, hwMinMMacTnlLtrEgress HwDot1agCfmEgressActionFieldValue, hwMinMMacTnlLtrEgressMac MacAddress, hwMinMMacTnlLtrEgressPortIdSubtype HwLldpPortIdSubtype, hwMinMMacTnlLtrEgressPortId HwLldpPortId } hwMinMMacTnlLtrSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the parameters used to describe Ltr packets. " ::= { hwMinMMacTnlLtrEntry 1} hwMinMMacTnlLtrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. " REFERENCE "802.1ag clause 12.14.7.5.2" ::= { hwMinMMacTnlLtrEntry 2 } hwMinMMacTnlLtrTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "TTL field value for a returned LTR." ::= { hwMinMMacTnlLtrEntry 11 } hwMinMMacTnlLtrForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates an identifier that shows whether the LTM packet should be forwarded to the next hop. " ::= { hwMinMMacTnlLtrEntry 12 } hwMinMMacTnlLtrLastEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "LTR packet is a response packet to a LTM packet. The LTM packet is the last packet sent by a port on a device. This variable indicates the port identifier of the LTM packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively." ::= { hwMinMMacTnlLtrEntry 13 } hwMinMMacTnlLtrNextEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively." ::= { hwMinMMacTnlLtrEntry 14 } hwMinMMacTnlLtrRelay OBJECT-TYPE SYNTAX HwDot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value in the Relay Action field." ::= { hwMinMMacTnlLtrEntry 15 } hwMinMMacTnlLtrIngress OBJECT-TYPE SYNTAX HwDot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Ingress Action Field of the LTM." ::= { hwMinMMacTnlLtrEntry 16 } hwMinMMacTnlLtrIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field." ::= { hwMinMMacTnlLtrEntry 17 } hwMinMMacTnlLtrIngressPortIdSubtype OBJECT-TYPE SYNTAX HwLldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the Ingress Port ID." ::= { hwMinMMacTnlLtrEntry 18 } hwMinMMacTnlLtrIngressPortId OBJECT-TYPE SYNTAX HwLldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. " ::= { hwMinMMacTnlLtrEntry 19 } hwMinMMacTnlLtrEgress OBJECT-TYPE SYNTAX HwDot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Egress Action Field of the LTM." ::= { hwMinMMacTnlLtrEntry 20 } hwMinMMacTnlLtrEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field." ::= { hwMinMMacTnlLtrEntry 21 } hwMinMMacTnlLtrEgressPortIdSubtype OBJECT-TYPE SYNTAX HwLldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the egress Port ID." ::= { hwMinMMacTnlLtrEntry 22 } hwMinMMacTnlLtrEgressPortId OBJECT-TYPE SYNTAX HwLldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. " ::= { hwMinMMacTnlLtrEntry 23 } hwMinMMacTnlApsObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 3 } hwMinMMacTnlApsCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMMacTnlApsCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table for the Aps protection of the mac-tunnel." ::= { hwMinMMacTnlApsObjects 1 } hwMinMMacTnlApsCfgEntry OBJECT-TYPE SYNTAX HwMinMMacTnlApsCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table entry for the Aps protection of the mac-tunnel. " INDEX { hwMinMMacTnlIndex } ::= { hwMinMMacTnlApsCfgTable 1 } HwMinMMacTnlApsCfgEntry ::= SEQUENCE { hwMinMProtectMacTnlIndex Unsigned32, hwMinMProtectMacTnlName OCTET STRING, hwMinMProtectMacTnlDMac MacAddress, hwMinMProtectMacTnlBVlanID VlanId, hwMinMProtectApsSwitchMode HWProtectMode, hwMinMProtectProtocolApsEnable EnabledStatus, hwMinMProtectApsFastInterval HWApsInterval, hwMinMProtectHoldoffTime Integer32, hwMinMProtectRevMode EnabledStatus, hwMinMProtectRevWtrTime Integer32, hwMinMProtectSwitchOperation HWSwitchOperation, hwMinMProtectProtocol HWProtectProtocol, hwMinMProtectRowStatus RowStatus } hwMinMProtectMacTnlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of ProtectMacTunnel. It begins with one." ::= { hwMinMMacTnlApsCfgEntry 11 } hwMinMProtectMacTnlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the tunnel name of the protective mac-tunnel." ::= { hwMinMMacTnlApsCfgEntry 12 } hwMinMProtectMacTnlDMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the remote MAC address of the protecting mac-tunnel." ::= { hwMinMMacTnlApsCfgEntry 13 } hwMinMProtectMacTnlBVlanID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094." ::= { hwMinMMacTnlApsCfgEntry 14 } hwMinMProtectApsSwitchMode OBJECT-TYPE SYNTAX HWProtectMode MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels. oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end onetoone(3): 1:1 protection mode By the default, the 1:1 protection mode is used. " DEFVAL { 3 } ::= { hwMinMMacTnlApsCfgEntry 15 } hwMinMProtectProtocolApsEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled. By default, the protocol is disabled. " DEFVAL { 2 } ::= { hwMinMMacTnlApsCfgEntry 16 } hwMinMProtectApsFastInterval OBJECT-TYPE SYNTAX HWApsInterval MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the configuration of fast sending time interval for each protection group. The time intervals for fast sending of Aps packets described in the G.8031 are as follows: By default, the time interval for fast sending of Aps packets in G.8031 is 3.3 ms. Optional values for sending interval are as follows: ApsInterval3dot3ms(1): indicates a sending interval of 3.3 ms. ApsInterval5ms(3): indicates a sending interval of 5 ms. ApsInterval10ms(3): indicates a sending interval of 10 ms. ApsInterval5ms(4): indicates a sending interval of 15 ms. ApsInterval20ms(5): indicates a sending interval of 20 ms. ApsInterval30ms(6): indicates a sending interval of 30 ms." DEFVAL { 1 } ::= { hwMinMMacTnlApsCfgEntry 17 } hwMinMProtectHoldoffTime OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms. It ranges from 0 to 100. By default, the switchover restoration time is not delayed. The value of delay is zero. " DEFVAL { 0 } ::= { hwMinMMacTnlApsCfgEntry 18 } hwMinMProtectRevMode OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels." ::= { hwMinMMacTnlApsCfgEntry 19 } hwMinMProtectRevWtrTime OBJECT-TYPE SYNTAX Integer32 (0..120) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels. By default, the switchover mode is restoration. The restoration time is five minutes." DEFVAL { 5 } ::= { hwMinMMacTnlApsCfgEntry 20 } hwMinMProtectSwitchOperation OBJECT-TYPE SYNTAX HWSwitchOperation MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the switchover commands for the Aps protection group of mac-tunnels. The priority levels in a descending order are: clear, lock, force and manual. clear(1): clears the lock, force and manual commands, and WTR state on the local end. After the local commands are cleared, the WTR state cannot be entered. lock(2): locks the services on the working tunnel. force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state. manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state. null(5):there is not manual commands." ::= { hwMinMMacTnlApsCfgEntry 21 } hwMinMProtectProtocol OBJECT-TYPE SYNTAX HWProtectProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the protection protocol of the protection group of mac-tunnels. ProtocolAPS(1): use an APS protocol to enhance the protection switching. ProtocolOAM(2): not using any APS protocol to enhance the protection switching. By the default, the ProtocolOAM is used. " ::= { hwMinMMacTnlApsCfgEntry 22 } hwMinMProtectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy" ::= { hwMinMMacTnlApsCfgEntry 51 } hwMinMSIObjects OBJECT IDENTIFIER ::= { hwMinMObjects 3 } hwMinMSIIndexNext OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the next Service Instance. It begins with one." ::= { hwMinMSIObjects 1 } hwMinMSICfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMSICfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table of a service instance." ::= { hwMinMSIObjects 2 } hwMinMSICfgEntry OBJECT-TYPE SYNTAX HwMinMSICfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table entry of a service instance." INDEX { hwMinMSIIndex } ::= { hwMinMSICfgTable 1 } HwMinMSICfgEntry ::= SEQUENCE { hwMinMSIIndex Unsigned32, hwMinMSIID Integer32, hwMinMSIName OCTET STRING, hwMinMSIServiceType HWServiceType, hwMinMSIPriorityTrust8021p TruthValue, hwMinMSIPriorityValue Integer32, hwMinMSIInterfaceType HWInterfaceType, hwMinMSIAdminStatus HWAdminStatus, hwMinMSIOperStatus HWOperStatus, hwMinMSIMacLearningEnable EnabledStatus, hwMinMSIMacLimitAction HWProcessBehavior, hwMinMSIMacLimitAlarm EnabledStatus, hwMinMSIMacLimitMaxinum Integer32, hwMinMSIL2CtrlProProcess BITS, hwMinMSIUnknownUnicastEnbale EnabledStatus, hwMinMSIMulticastEnable EnabledStatus, hwMinMSIBroadcastEnable EnabledStatus, hwMinMSIDescription OCTET STRING, hwMinMSIStatisticsEnable EnabledStatus, hwMinMSIStatisticsReset EnabledStatus, hwMinMSIFcsTransparentEnable EnabledStatus, hwMinMSIIngressPriorityValue Integer32, hwMinMSIEgressPriorityTrustBTag TruthValue, hwMinMSIIngressDeiValue Integer32, hwMinMSIEgressDeiTrustBDei TruthValue, hwMinMSIIsolateAll EnabledStatus, hwMinMSIRowStatus RowStatus } hwMinMSIIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the Index of Service Instance.It begins with one." ::= { hwMinMSICfgEntry 1 } hwMinMSIID OBJECT-TYPE SYNTAX Integer32 (0..16777216) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of a service instance. It can be any value within 24 bits. By default, the value is null. One ID can be configured to one service instance only. " ::= { hwMinMSICfgEntry 11 } hwMinMSIName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of a service instance. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. " ::= { hwMinMSICfgEntry 12 } hwMinMSIServiceType OBJECT-TYPE SYNTAX HWServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of a service instance as follows: p2p: indicates the type of a point-to-point service instance. mp2mp: indicates the type of a multi-point to multi-point service instance. By default, the service type is mp2mp. " DEFVAL { 2 } ::= { hwMinMSICfgEntry 13 } hwMinMSIPriorityTrust8021p OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the priority of user packet based on 802.1Q is trusted. By default, no user priority is trusted. " DEFVAL { 2 } ::= { hwMinMSICfgEntry 14 } hwMinMSIPriorityValue OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates priority level of a service instance. It is used to set the priority field of I-TAG. By default, no user priority is trusted and the priority is zero. The special value of eight is used to indicate that priority of user is trusted. " DEFVAL { 0 } ::= { hwMinMSICfgEntry 15 } hwMinMSIInterfaceType OBJECT-TYPE SYNTAX HWInterfaceType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type of a service instance. transparent: indicates the transparent transmission mode. one-to-one: indicates the one-to-one in the s-tagged mode. bundling: indicates the bundling in the s-tagged mode. By default, the s-tagged bundling mode is used. " DEFVAL { 3} ::= { hwMinMSICfgEntry 16 } hwMinMSIAdminStatus OBJECT-TYPE SYNTAX HWAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the administration status of a service instance." ::= { hwMinMSICfgEntry 17 } hwMinMSIOperStatus OBJECT-TYPE SYNTAX HWOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical status of a service instance." ::= { hwMinMSICfgEntry 18 } hwMinMSIMacLearningEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Disable the MAC learning of a service instance. By default, the MAC learning is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p. " DEFVAL { 1 } ::= { hwMinMSICfgEntry 19 } hwMinMSIMacLimitAction OBJECT-TYPE SYNTAX HWProcessBehavior MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates MAC learning restriction of a service instance. After the number of MAC address entries reaches the limit, the system takes the following actions: discard: indicates that packets with new MAC address are discarded. forward: indicates that packets with new MAC address are forwarded, but the address is not added to the MAC address table. " ::= { hwMinMSICfgEntry 20 } hwMinMSIMacLimitAlarm OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates MAC learning restriction of a service instance. Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows: disable: indicates no alarm is sent. enable: indicates alarm is sent in syslog. " ::= { hwMinMSICfgEntry 21 } hwMinMSIMacLimitMaxinum OBJECT-TYPE SYNTAX Integer32 (0..131072) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates MAC learning restriction of a service instance. The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072. When the number is set to zero, no restriction is imposed on the address learning. " ::= { hwMinMSICfgEntry 22 } hwMinMSIL2CtrlProProcess OBJECT-TYPE SYNTAX BITS { all(0), stp(1), lldp(2), lacp(3), dot3ah(4), dot1ag(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all bits are 0; if a bit is 1, it indicates that the packets of this protocol will be discarded. If bit 0 is 1, it indicates that all layer 2 control packets will be discarded. If bit 1 is 1, it indicates that the STP packets will be discarded. If bit 2 is 1, it indicates that the LLAP packets will be discarded. If bit 3 is 1, it indicates that the LACP packets will be discarded. If bit 4 is 1, it indicates that the DOT3AH packets will be discarded. If bit 5 is 1, it indicates that the DOTLAG packets will be discarded. " DEFVAL { {all } } ::= { hwMinMSICfgEntry 23} hwMinMSIUnknownUnicastEnbale OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates how a service instance processes an unknown unicast packet. By default, the service instance is allowed to broadcast the unknown unicast packet. This object applies to the mp2mp service instance only. " DEFVAL { 1 } ::= { hwMinMSICfgEntry 24 } hwMinMSIMulticastEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates how a service instance processes an unknown multicast packet. By default, the service instance is allowed to broadcast the unknown multicast packet. This object applies to the mp2mp service instance only." DEFVAL { 1 } ::= { hwMinMSICfgEntry 25 } hwMinMSIBroadcastEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates how a service instance processes a broadcast packet. By default, the service instance is allowed to forward the broadcast packet. This object applies to the mp2mp service instance only. " DEFVAL { 1 } ::= { hwMinMSICfgEntry 26 } hwMinMSIDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates descriptive information of a service instance. Its length ranges from 1 to 80 bytes and the first byte cannot be a space. " ::= { hwMinMSICfgEntry 27 } hwMinMSIStatisticsEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates that the traffic statistics is enabled on a service instance." DEFVAL { 2 } ::= { hwMinMSICfgEntry 28 } hwMinMSIStatisticsReset OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the reset on traffic statistics of a service instance." ::= { hwMinMSICfgEntry 29 } hwMinMSIFcsTransparentEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark." DEFVAL { 2 } ::= { hwMinMSICfgEntry 30 } hwMinMSIIngressPriorityValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the source priority of a service instance. It is used to set the I-TAG priority field when packets are encapsulated for transmission on the tunnel. The source priority has eight levels that range from 0 to 7. By default, the source priority is copied to the mac-tunnel. When the source priority is set to 8, it indicates that the service instance is not configured with a priority, and the priority does not exist." ::= { hwMinMSICfgEntry 31 } hwMinMSIEgressPriorityTrustBTag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the destination priority of a service instance is copied from the B-TAG priority. It is used to set whether the I-TAG priority is copied from the B-TAG priority when packets reach the end of the tunnel and are decapsulated. By default, the B-TAG priority is not copied to I-TAG." DEFVAL { 2 } ::= { hwMinMSICfgEntry 32 } hwMinMSIIngressDeiValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the source DEI of a service instance. It is used to set the DEI field when packets are encapsulated for transmission on the tunnel. When DEI is true, the value is set to 1. When DEI is false, the value is set to 0. By default, the S-DEI priority is copied to the mac-tunnel. When the value of the DEI is set to 2, it indicates that no DEI is configured on the tunnel." DEFVAL { 1 } ::= { hwMinMSICfgEntry 33 } hwMinMSIEgressDeiTrustBDei OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the destination DEI of a service instance is copied from the B-DEI priority. It is used to set whether the DEI of I-TAG is coped from B-DEI when packets reach the end of the tunnel and are decpasulated. By default, B-DEI is not copied to I-TAG." DEFVAL { 2 } ::= { hwMinMSICfgEntry 34 } hwMinMSIIsolateAll OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p." DEFVAL { 2 } ::= { hwMinMSICfgEntry 35 } hwMinMSIRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy" ::= { hwMinMSICfgEntry 51 } hwMinMSIMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMSIMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table of a service instance user. " ::= { hwMinMSIObjects 3 } hwMinMSIMappingEntry OBJECT-TYPE SYNTAX HwMinMSIMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration table entry of a service instance user. " INDEX { hwMinMSIIndex, hwMinMSIMappingIfIndex,hwMinMSIMappingVlanPriority,hwMinMSIMappingGlobalVlanID} ::= { hwMinMSIMappingTable 1 } HwMinMSIMappingEntry ::= SEQUENCE { hwMinMSIMappingIfIndex InterfaceIndexOrZero, hwMinMSIMappingVlanPriority Integer32, hwMinMSIMappingGlobalVlanID VlanIdOrNone, hwMinMSIMappingVlanListLow VlanList, hwMinMSIMappingVlanListHigh VlanList, hwMinMSIMappingUserIsolate EnabledStatus, hwMinMSIMappingRowStatus RowStatus } hwMinMSIMappingIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported." ::= { hwMinMSIMappingEntry 1 } hwMinMSIMappingVlanPriority OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported." ::= { hwMinMSIMappingEntry 2} hwMinMSIMappingGlobalVlanID OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION " The global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported." ::= { hwMinMSIMappingEntry 3 } hwMinMSIMappingVlanListLow OBJECT-TYPE SYNTAX VlanList (SIZE(256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the VLAN ID starting value of a service instance user. " ::= { hwMinMSIMappingEntry 11 } hwMinMSIMappingVlanListHigh OBJECT-TYPE SYNTAX VlanList (SIZE(256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the VLAN ID ending value of a service instance user. " ::= { hwMinMSIMappingEntry 12 } hwMinMSIMappingUserIsolate OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p" DEFVAL { 2 } ::= { hwMinMSIMappingEntry 13 } hwMinMSIMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy" ::= { hwMinMSIMappingEntry 51 } hwMinMSIBindMacTnlTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMSIBindMacTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mac-tunnel table bound with a service instance." ::= { hwMinMSIObjects 4 } hwMinMSIBindMacTnlEntry OBJECT-TYPE SYNTAX HwMinMSIBindMacTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the mac-tunnel table entry bound with a service instance." INDEX { hwMinMSIIndex,hwMinMSIBindMacTnlIndex } ::= { hwMinMSIBindMacTnlTable 1 } HwMinMSIBindMacTnlEntry ::= SEQUENCE { hwMinMSIBindMacTnlIndex Unsigned32, hwMinMSIBindMacTnlRowStatus RowStatus } hwMinMSIBindMacTnlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of Mac Tunnel. It begins with one." ::= { hwMinMSIBindMacTnlEntry 1 } hwMinMSIBindMacTnlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy" ::= { hwMinMSIBindMacTnlEntry 51 } hwMinMSIStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMSIStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the hwMinMSIStatisticsTable of a service instance. " ::= { hwMinMSIObjects 5 } hwMinMSIStatisticsEntry OBJECT-TYPE SYNTAX HwMinMSIStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the hwMinMSIStatisticsTable entry of a service instance." INDEX { hwMinMSIIndex } ::= { hwMinMSIStatisticsTable 1 } HwMinMSIStatisticsEntry ::= SEQUENCE { hwMinMSIInPackets Counter64, hwMinMSIInBytes Counter64, hwMinMSIOutPackets Counter64, hwMinMSIOutBytes Counter64 } hwMinMSIInPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets received by a user of the current service instance." ::= { hwMinMSIStatisticsEntry 11 } hwMinMSIInBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes received by a user of the current service instance." ::= { hwMinMSIStatisticsEntry 12 } hwMinMSIOutPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent by a user of the current service instance." ::= { hwMinMSIStatisticsEntry 13 } hwMinMSIOutBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of bytes sent by a user of the current service instance." ::= { hwMinMSIStatisticsEntry 14 } hwMinMSIStaticMacFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMinMSIStaticMacFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the static MAC forwarding table of a service instance:" ::= { hwMinMSIObjects 6 } hwMinMSIStaticMacFwdEntry OBJECT-TYPE SYNTAX HwMinMSIStaticMacFwdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the static MAC forwarding table entry of a service instance:" INDEX { hwMinMSIIndex, hwMinMSIStaticMacFwdCDMac } ::= { hwMinMSIStaticMacFwdTable 1 } HwMinMSIStaticMacFwdEntry ::= SEQUENCE { hwMinMSIStaticMacFwdCDMac MacAddress, hwMinMSIStaticMacFwdMacTnlName OCTET STRING, hwMinMSIStaticMacFwdOutgoingIfIndex InterfaceIndexOrZero, hwMinMSIStaticMacFwdVlanID VlanIdOrNone, hwMinMSIStaticMacFwdType HWStaticMacFwdType, hwMinMSIStaticMacFwdRowStatus RowStatus } hwMinMSIStaticMacFwdCDMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the destination MAC address of a customer." ::= { hwMinMSIStaticMacFwdEntry 1 } hwMinMSIStaticMacFwdMacTnlName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the name of the mac-tunnel. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. " ::= { hwMinMSIStaticMacFwdEntry 11 } hwMinMSIStaticMacFwdOutgoingIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates a outbound port. The value zero is used to indicate that interface was unknown or none." ::= { hwMinMSIStaticMacFwdEntry 12 } hwMinMSIStaticMacFwdVlanID OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the downstream vlanid. The special value of zero is used to indicate that no VLAN-ID is present or used. " ::= { hwMinMSIStaticMacFwdEntry 13 } hwMinMSIStaticMacFwdType OBJECT-TYPE SYNTAX HWStaticMacFwdType MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the type of the static MAC forwarding table of a service instance: static(1): indicates a static entry. blackhole(2): indicates a blackhole entry. " ::= { hwMinMSIStaticMacFwdEntry 14 } hwMinMSIStaticMacFwdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy." ::= { hwMinMSIStaticMacFwdEntry 51 } hwSINameToIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSINameToIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name and the index mapping table of a service instance." ::= { hwMinMSIObjects 7 } hwSINameToIndexMappingEntry OBJECT-TYPE SYNTAX HwSINameToIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name and the index mapping table entry of a service instance." INDEX { hwSIName } ::= { hwSINameToIndexMappingTable 1 } HwSINameToIndexMappingEntry ::= SEQUENCE { hwSIName OCTET STRING, hwSIIndex Unsigned32 } hwSIName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of a service instance. It is a character string with a maximum of 31 bytes and a minimum of 1 byte. " ::= { hwSINameToIndexMappingEntry 1 } hwSIIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of a service instance.It begins with one." ::= { hwSINameToIndexMappingEntry 11 } hwMinMNotifications OBJECT IDENTIFIER ::= { hwMinMMIB 2 } -- definition of MINM-related trAps hwMinMMacTnlUp NOTIFICATION-TYPE OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus } STATUS current DESCRIPTION "Indicates the Up alarm of the mac-tunnel. This object forms a pair with the following hwMinMMacTnlDown. " ::= { hwMinMNotifications 1 } hwMinMMacTnlDown NOTIFICATION-TYPE OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus } STATUS current DESCRIPTION "Indicates the Down alarm of the mac-tunnel. This object forms a pair with the previous hwMinMMacTnlUp. " ::= { hwMinMNotifications 2 } hwMinMSIUp NOTIFICATION-TYPE OBJECTS { hwMinMSIID, hwMinMSIName, hwMinMSIAdminStatus, hwMinMSIOperStatus } STATUS current DESCRIPTION "Indicates the Up alarm of a service instance. This object forms a pair with the following hwMinMSIDown. " ::= { hwMinMNotifications 3 } hwMinMSIDown NOTIFICATION-TYPE OBJECTS { hwMinMSIID, hwMinMSIName, hwMinMSIAdminStatus, hwMinMSIOperStatus } STATUS current DESCRIPTION "Indicates the Down alarm of a service instance. This object forms a pair with the previous hwMinMSIUp. " ::= { hwMinMNotifications 4 } hwMinMMacTnlCCFaultAlarm NOTIFICATION-TYPE OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlSomeRMepCcmDefect, hwMinMMacTnlSomeRdiDefect } STATUS current DESCRIPTION "Indicates an alarm on the connectivity of fault. " ::= { hwMinMNotifications 5 } hwMinMMacTnlSwitch NOTIFICATION-TYPE OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMProtectMacTnlName, hwMinMProtectMacTnlDMac, hwMinMProtectMacTnlBVlanID, hwMinMProtectSwitchOperation } STATUS current DESCRIPTION "Indicates the Aps protection group switchover alarm of the mac-tunnel. This object forms a pair with the following hwMinMMacTnlRevertive. hwMinMMacTnlName: indicates the name of the primary tunnel. hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel. hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel. hwMinMProtectMacTnlName: Indicates the name of the backup tunnel. hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels. hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel. hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel. " ::= { hwMinMNotifications 6 } hwMinMMacTnlRevertive NOTIFICATION-TYPE OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMProtectMacTnlName, hwMinMProtectMacTnlDMac, hwMinMProtectMacTnlBVlanID, hwMinMProtectSwitchOperation } STATUS current DESCRIPTION " Indicates the Aps protection group switchover alarm of the mac-tunnel. This object forms a pair with the previous hwMinMMacTnlSwitch. hwMinMMacTnlName: indicates the name of the primary tunnel. hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel. hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel. hwMinMProtectMacTnlName: Indicates the name of the backup tunnel. hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels. hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel. hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel." ::= { hwMinMNotifications 7 } hwMinMSIMacLimitNumRaisingThreshold NOTIFICATION-TYPE OBJECTS { hwMinMSIName, hwMinMSIID, hwMinMSIMacLimitMaxinum } STATUS current DESCRIPTION "Indicates the alarm of the mac limiting number beyond the Threshold." ::= { hwMinMNotifications 8 } -- ------------------------------------------------------------- -- HUAWEI-MINM-MIB - Conformance Information -- ------------------------------------------------------------- hwMinMConformance OBJECT IDENTIFIER ::= { hwMinMMIB 3 } hwMinMGroups OBJECT IDENTIFIER ::= { hwMinMConformance 1 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- hwMinMSystemGroup OBJECT-GROUP OBJECTS { hwMinMVirtualMac, hwMinMMacTnlBVlanListLow, hwMinMMacTnlBVlanListHigh,hwMinMTrapEnable } STATUS current DESCRIPTION "A collection of objects providing the System configuration of the MAC-in-MAC capability." ::= { hwMinMGroups 1 } hwMinMMacTnlCfgGroup OBJECT-GROUP OBJECTS { hwMinMVirtualMac, hwMinMMacTnlBVlanListLow, hwMinMMacTnlBVlanListHigh, hwMinMMacTnlIndexNext, hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlBVlanType, hwMinMMacTnlPriorityValue, hwMinMMacTnlOutgoingIfIndex, hwMinMMacTnlSplitHorizonEnable, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus, hwMinMMacTnlDescription, hwMinMMacTnlRowStatus, hwMacTnlIndex,hwMinMMacTnlStatisticsReset,hwMinMMacTnlPriorityTrustITag,hwMinMMacTnlDeiTrustIDei,hwMinMMacTnlDeiValue } STATUS current DESCRIPTION "A collection of objects providing the configuration of the MAC TUNNEL capability." ::= { hwMinMGroups 2 } hwMinMMacTnlStatisticsGroup OBJECT-GROUP OBJECTS { hwMinMMacTnlInPackets, hwMinMMacTnlInBytes, hwMinMMacTnlOutPackets, hwMinMMacTnlOutBytes } STATUS current DESCRIPTION "A collection of objects providing the Statistics of the Service Instance capability." ::= { hwMinMGroups 3 } hwMinMMacTnlOAMGroup OBJECT-GROUP OBJECTS { hwMinMMacTnlCfmEnable, hwMinMMacTnlCCInterval, hwMinMMacTnlSomeRMepCcmDefect, hwMinMMacTnlSomeRdiDefect, hwMinMMacTnlCcReceiveEnabled,hwMinMMacTnlCCRowStatus, hwMinMMacTnlLbmEnable, hwMinMMacTnlLbmTimeStamp, hwMinMMacTnlLbmTimeOut, hwMinMMacTnlLbmTimes, hwMinMMacTnlLbmSize, hwMinMMacTnlLbrIn, hwMinMMacTnlMacPingRTTMin,hwMinMMacTnlMacPingRTTMax,hwMinMMacTnlMacPingRTTAvg, hwMinMMacTnlMacPingPacketLossRatio, hwMinMMacTnlLbmResult,hwMinMMacTnlLbRowStatus, hwMinMMacTnlLtmEnable, hwMinMMacTnlLtmTimeStamp, hwMinMMacTnlLtmTimeOut, hwMinMMacTnlLtmTtl, hwMinMMacTnlLtmFlags,hwMinMMacTnlLtmSeqNumber,hwMinMMacTnlLtmEgressIdentifier,hwMinMMacTnlLtmResult, hwMinMMacTnlLtmRowStatus, hwMinMMacTnlLtrTtl,hwMinMMacTnlLtrForwarded,hwMinMMacTnlLtrLastEgressIdentifier, hwMinMMacTnlLtrNextEgressIdentifier,hwMinMMacTnlLtrRelay,hwMinMMacTnlLtrIngress,hwMinMMacTnlLtrIngressMac, hwMinMMacTnlLtrIngressPortIdSubtype,hwMinMMacTnlLtrIngressPortId,hwMinMMacTnlLtrEgress,hwMinMMacTnlLtrEgressMac,hwMinMMacTnlLtrEgressPortIdSubtype, hwMinMMacTnlLtrEgressPortId } STATUS current DESCRIPTION "A collection of objects providing the OAM of the MAC TUNNEL capability." ::= { hwMinMGroups 4 } hwMinMMacTnlApsGroup OBJECT-GROUP OBJECTS { hwMinMProtectMacTnlName, hwMinMProtectApsSwitchMode, hwMinMProtectProtocolApsEnable, hwMinMProtectApsFastInterval, hwMinMProtectHoldoffTime, hwMinMProtectRevMode, hwMinMProtectRevWtrTime, hwMinMProtectSwitchOperation, hwMinMProtectProtocol,hwMinMProtectMacTnlDMac, hwMinMProtectMacTnlBVlanID, hwMinMProtectRowStatus,hwMinMProtectMacTnlIndex } STATUS current DESCRIPTION "A collection of objects providing the Aps of the MAC TUNNEL capability." ::= { hwMinMGroups 5 } hwMinMSICfgGroup OBJECT-GROUP OBJECTS { hwMinMSIIndexNext, hwMinMSIID, hwMinMSIName, hwMinMSIServiceType, hwMinMSIPriorityTrust8021p, hwMinMSIPriorityValue, hwMinMSIInterfaceType, hwMinMSIAdminStatus, hwMinMSIOperStatus, hwMinMSIMacLearningEnable, hwMinMSIMacLimitAction, hwMinMSIMacLimitAlarm, hwMinMSIMacLimitMaxinum, hwMinMSIL2CtrlProProcess, hwMinMSIUnknownUnicastEnbale, hwMinMSIMulticastEnable, hwMinMSIBroadcastEnable, hwMinMSIDescription, hwMinMSIRowStatus, hwMinMSIStaticMacFwdOutgoingIfIndex, hwMinMSIStaticMacFwdVlanID, hwMinMSIStaticMacFwdType,hwMinMSIFcsTransparentEnable, hwMinMSIStaticMacFwdRowStatus, hwSIIndex, hwMinMSIBindMacTnlRowStatus, hwMinMSIStaticMacFwdMacTnlName,hwMinMSIMappingVlanListLow,hwMinMSIMappingVlanListHigh, hwMinMSIMappingUserIsolate, hwMinMSIIngressPriorityValue,hwMinMSIEgressPriorityTrustBTag,hwMinMSIIngressDeiValue,hwMinMSIEgressDeiTrustBDei,hwMinMSIIsolateAll,hwMinMSIMappingRowStatus } STATUS current DESCRIPTION "A collection of objects providing the configuration of Service Instance capability." ::= { hwMinMGroups 6 } hwMinMSIStatisticsGroup OBJECT-GROUP OBJECTS { hwMinMSIInPackets, hwMinMSIInBytes, hwMinMSIOutPackets, hwMinMSIOutBytes, hwMinMSIStatisticsReset, hwMinMSIStatisticsEnable } STATUS current DESCRIPTION "A collection of objects providing the Statistics of the Service Instance capability." ::= { hwMinMGroups 7 } hwMinMNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMinMMacTnlUp, hwMinMMacTnlDown, hwMinMSIUp, hwMinMSIDown, hwMinMMacTnlCCFaultAlarm, hwMinMMacTnlSwitch, hwMinMMacTnlRevertive, hwMinMSIMacLimitNumRaisingThreshold } STATUS current DESCRIPTION "Collection of notification objects." ::= { hwMinMGroups 8 } hwMinMCompliances MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities implementing the Huawei MINM MIB" MODULE -- this module MANDATORY-GROUPS { hwMinMSystemGroup, hwMinMMacTnlCfgGroup, hwMinMMacTnlOAMGroup, hwMinMMacTnlApsGroup, hwMinMSICfgGroup, hwMinMMacTnlStatisticsGroup, hwMinMSIStatisticsGroup, hwMinMNotificationGroup } ::= { hwMinMConformance 2 } END -- -- HUAWEI-MINM-MIB.mib --