-- =================================================================== -- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: -- Reference: -- Version: V2.75 -- =================================================================== HUAWEI-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS EnabledStatus FROM P-BRIDGE-MIB InterfaceIndex FROM IF-MIB ImaFrameLength, ImaGroupState FROM HUAWEI-IMA-MIB MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter64, IpAddress FROM SNMPv2-SMI TruthValue, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC hwDatacomm FROM HUAWEI-MIB NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF DateAndTime FROM SNMPv2-TC entPhysicalName FROM ENTITY-MIB hwGtlItemName FROM HUAWEI-GTL-MIB; hwPortMIB MODULE-IDENTITY LAST-UPDATED "201707081826Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com" DESCRIPTION "The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB" -- Add revision info here! REVISION "201707081826Z" DESCRIPTION "add hwCableSnrAbnormal,hwCableSnrNormal,hwCableSnrDetectNotSupport" -- Add revision info here! REVISION "201704272334Z" DESCRIPTION "modify hwEthernetSpeedSet." REVISION "201703281130Z" DESCRIPTION "add hwPortLicenseActFail,hwPortLicenseActSuccess." -- Add revision info here! REVISION "201703150909Z" DESCRIPTION "add blockAc alarm." -- Add revision info here! REVISION "201701241430Z" DESCRIPTION "add hwNbAcBlock hwNbRealTimeDelay." -- Add revision info here! REVISION "201701041730Z" DESCRIPTION "add hwPortProtectGroupId,hwPortProtectGroupAvailable,hwPortProtectGroupDelete." -- Add revision info here! REVISION "201612161730Z" DESCRIPTION "add hwBoardNotSupportAssignTrunk." -- Add revision info here! REVISION "201610122026Z" DESCRIPTION "modify hwEthernetJumboframeMaxLength." REVISION "201609252334Z" DESCRIPTION "modify hwEthernetSpeedSet." REVISION "201608151106Z" DESCRIPTION "Add hwPhysicalPortInBroadcastRapidChange, hwInputBroadcastChangeThreshold, hwCurrentStatisticalInputBroadcast, hwBaseStatisticalInputBroadcast." REVISION "201608022211Z" DESCRIPTION "modify hwImpedanceMismatch." REVISION "201607251508Z" DESCRIPTION "Add hwPicLcdAlarm ,hwPicLcdAlarmResume." REVISION "201607211145Z" DESCRIPTION "Add hwImpedenceMismatch." REVISION "201606161054Z" DESCRIPTION "Add hwPhysicalPortName of this mib nodes:hwPtimAlarm,hwB3TcaAlarm,hwPplmAlarm,hwPrdiAlarm,hwLomAlarm,hwPuneqAlarm,hwPaisAlarm." -- Add revision info here! REVISION "201605111850Z" DESCRIPTION "Add hwPortGroupTransModeDiff,hwPortGroupTransModeDiffResume,hwPhysicalPortGroupID,hwPortTransModeReasonDescr." -- Add revision info here! REVISION "201605041850Z" DESCRIPTION "Add hwPortErrorRateExceed." REVISION "201604251526Z" DESCRIPTION "Add hwIPIfStatTable." REVISION "201604180926Z" DESCRIPTION "Add hwPortSpeedChangeTrap,hwPhysicalPortCurSpeed,hwPhysicalPortLastSpeed." REVISION "201603291516Z" -- March 29, 2016 at 15:16 GMT DESCRIPTION "Add hwSubIfNumExceededSpecTrapObject,hwSubIfSpecNum,hwSubIfNumExceededSpecAlarm,hwSubIfNumExceededSpecAlarmResume." REVISION "201602171634Z" DESCRIPTION "Add hwPortCrcRateExceed." REVISION "201512011108Z" DESCRIPTION "Add hwNbPortType." REVISION "201510191105Z" DESCRIPTION "Modify hwCollisionAlarm,hwCollisionAlarmResume." REVISION "201510161105Z" DESCRIPTION "Modify hwRdiAlarm,hwRdiAlarmResume,hwAisAlarm ,hwAisAlarmResume,hwCollisionAlarm,hwCollisionAlarmResume." REVISION "201510091105Z" DESCRIPTION "Add hwRdiAlarm,hwRdiAlarmResume,hwAisAlarm ,hwAisAlarmResume,hwCollisionAlarm,hwCollisionAlarmResume." REVISION "201508221138Z" DESCRIPTION "Add hwPortModeChange,hwPhysicalPortMode." REVISION "201508221138Z" DESCRIPTION "Increased the default Mib node for hwEthernetFlowControl." REVISION "201508221138Z" DESCRIPTION "Add hwLicenseInactiveAlarm,hwLicenseInactiveAlarmResume,hwLicenseResourceLackAlarm,hwLicenseResourceLackAlarmResume." REVISION "201507101139Z" DESCRIPTION "Add hwPortTotalStatistics." REVISION "201504110000Z" DESCRIPTION "Add hwPortPhysicalRate, hwPortPhysicalRateDegradeAlarm, hwPortPhysicalRateDegradeAlarmResume." -- Add revision info here! REVISION "201504100000Z" DESCRIPTION "Add hwPhysicalPortName of this mib nodes: hwAuAisAlarm, hwB3ExcAlarm, hwBip2ExcAlarm, hwBip2TcaAlarm, hwCposE1AlmE1RaiAlarm, hwCposE1DownE1AisAlarm, hwCposE1LfaAlarm, hwCposE1LmfaAlarm, hwCposE1UpE1AisAlarm, hwLpSlmVc12Alarm, hwLpTimVc12Alarm, hwLpUneqVc12Alarm, hwTuAisVc12Alarm, hwV5VcaisAlarm, hwVlopAlarm, hwVrdiAlarm, hwVrfiAlarm" -- Add revision info here! REVISION "201504030000Z" DESCRIPTION "Add hwInputRateChangeThresholdPercent, hwOutputRateChangeThresholdPercent, hwCurrentStatisticalPeriodRate, hwLastStatisticalPeriodRate, hwInputRateChangeOverThresholdNotice, hwOutputRateChangeOverThresholdNotice." REVISION "201503250000Z" DESCRIPTION "Add hwLinkHeartbeat trap" REVISION "201503241002Z" DESCRIPTION "Modify description of symbol error alarm high and low threshold." -- Add revision info here! REVISION "201503191000Z" DESCRIPTION "Add hwNbCommonTable and its leafs, add x50 lof,abit alarms" -- Add revision info here! REVISION "201503161416Z" DESCRIPTION "Modify description of crc error alarm high and low threshold." REVISION "201503021009Z" DESCRIPTION "Modified hwEthernetSpeedSet." REVISION "201502060000Z" DESCRIPTION "Increased the otn Mib leafs for the WDM interface." -- Add revision info here! REVISION "201501311400Z" DESCRIPTION "Add hwNarrowBand and its tables and leafs." REVISION "201408221142Z" DESCRIPTION "Modify the description of the hwEthHalfDuplex and hwEthFullDuplex." REVISION "201408221142Z" DESCRIPTION "Bind hwPhysicalPortAlarmName to hwDslLinkSignalLost and hwDslLinkSignalResume ." REVISION "201408221142Z" DESCRIPTION "Add hwMultiServiceOnOneCardAlarm,hwMultiServiceOnOneCardAlarmResume." REVISION "201408221142Z" DESCRIPTION "Add hwLogicalPort." REVISION "201406121140Z" DESCRIPTION "Add hwPhysicalPortFlowSurge, hwInputBroadcastSurgeOccur, hwInputBroadcastSurgeResume, hwOutputBroadcastSurgeOccur, hwOutputBroadcastSurgeResume." REVISION "201404162141Z" DESCRIPTION "Increased the otn Mib nodes for the WDM interface." REVISION "201404111150Z" DESCRIPTION "Increased two OBJECT-TYPE nodes hwPhysicalPortPreFecCoefficientStatistics and hwPhysicalPortPreFecPowerStatistics. Increased two traps hwPrefecTcaAlarm and hwPrefecTcaAlarmResume." REVISION "201404021011Z" DESCRIPTION "Added a object named hwPRBSTestInfo and it includes 4 tables : hwPRBSTestPortStatusTable,hwPRBSTestResultTable, hwPRBSTestIntervalTable and hwPRBSTestSegmentTable.hwPRBSTestPortStatusTable includes 10 nodes : hwPRBSTestPortStatusIfName,hwPRBSTestPortStatusSide,hwPRBSTestPortStatusSuportFlag,hwPRBSTestPortStatusPatternBitmap, hwPRBSTestPortStatusErrInsertLevel,hwPRBSTestPortStatusSlotNum,hwPRBSTestPortStatusCardNum, hwPRBSTestPortStatusPhyPortIfName,hwPRBSTestPortStatusResultCount,hwPRBSTestPortStatusOngoingTestIndex. hwPRBSTestResultTable includes 25 nodes : hwPRBSTestResultIfName,hwPRBSTestResultTestIndex, hwPRBSTestResultPhyPortIfName,hwPRBSTestResultSide,hwPRBSTestResultPattern,hwPRBSTestResultIntervalTime, hwPRBSTestResultIntervalCount,hwPRBSTestResultTestingIntervalIndex,hwPRBSTestResultStartTime, hwPRBSTestResultStopTime,hwPRBSTestResultProgress,hwPRBSTestResultRemainTime,hwPRBSTestResultErrInserted, hwPRBSTestResultTotalBit,hwPRBSTestResultErrorBit,hwPRBSTestResultBerCoe,hwPRBSTestResultBerPow, hwPRBSTestResultLos,hwPRBSTestResultEs,hwPRBSTestResultEfs,hwPRBSTestResultSes,hwPRBSTestResultUas, hwPRBSTestResultSegmentTime,hwPRBSTestResultSegmentTotalCount,hwPRBSTestResultTestingSegmentIndex. hwPRBSTestIntervalTable includes 17 nodes : hwPRBSTestIntervalIfName,hwPRBSTestIntervalTestIndex, hwPRBSTestIntervalIndex,hwPRBSTestIntervalStartTime,hwPRBSTestIntervalStopTime,hwPRBSTestIntervalProgress, hwPRBSTestIntervalRemainTime,hwPRBSTestIntervalErrInserted,hwPRBSTestIntervalTotalBit,hwPRBSTestIntervalErrorBit, hwPRBSTestIntervalBerCoe,hwPRBSTestIntervalBerPow,hwPRBSTestIntervalLos,hwPRBSTestIntervalEs, hwPRBSTestIntervalEfs,hwPRBSTestIntervalSes,hwPRBSTestIntervalUas.hwPRBSTestSegmentTable includes 14 nodes : hwPRBSTestSegmentIfName,hwPRBSTestSegmentTestIndex,hwPRBSTestSegmentIndex,hwPRBSTestSegmentStartTime, hwPRBSTestSegmentEndTime,hwPRBSTestSegmentTotalBit,hwPRBSTestSegmentErrorBit,hwPRBSTestSegmentBerCoe, hwPRBSTestSegmentBerPow,hwPRBSTestSegmentLos,hwPRBSTestSegmentEs,hwPRBSTestSegmentEfs,hwPRBSTestSegmentSes, hwPRBSTestSegmentUas." REVISION "201403311711Z" DESCRIPTION "Modified hwPhysicalLoopbackType." REVISION "201403241700Z" DESCRIPTION "Add hwPhysicalPortCrcPerWarningThresholdCoefficient, hwPhysicalPortCrcPerWarningThresholdPower, hwPhysicalPortCrcPerWarningResumeThresholdCoefficient, hwPhysicalPortCrcPerWarningResumeThresholdPower, hwPhysicalPortCrcPerWarningThresholdString, hwPhysicalPortCrcPerWarningResumeThresholdString; Add hwPhysicalPortCrcPerWarning and hwPhysicalPortCrcPerWarningResume" REVISION "201402211038Z" DESCRIPTION "Modified hwEthernetSpeedSet." REVISION "201402141135Z" DESCRIPTION "Increased 4 traps hwE3UpE3AisAlarm and hwE3UpE3AisAlarmResume and hwE3AlmE3RaiAlarm and hwE3AlmE3RaiAlarmResume." REVISION "201312240955Z" DESCRIPTION "Increased 24 traps hwOtuLomAlarm and hwOtuLomAlarmResume and hwOtuAisAlarm and hwOtuAisAlarmResume and hwOtuSdAlarm and hwOtuSdAlarmResume and hwOtuSfAlarm and hwOtuSfAlarmResume and hwSmBdiAlarm and hwSmBdiAlarmResume and hwSmIaeAlarm and hwSmIaeAlarmResume and hwSmTimAlarm and hwSmTimAlarmResume and hwOduAisAlarm and hwOduAisAlarmResume and hwOduLokAlarm and hwOduLokAlarmResume and hwOduOciAlarm and hwOduOciAlarmResume and hwPmBdiAlarm and hwPmBdiAlarmResume and hwPmTimAlarm and hwPmTimAlarmResume." REVISION "201312231101Z" DESCRIPTION "Modified hwDs0ChannelBundleSpeed." REVISION "201312041642Z" DESCRIPTION "Increased two nodes hwPhysicalPortCrcSdAlarmTriggerLsp and hwPhysicalPortCrcExcAlarmTriggerLsp." REVISION "201311161154Z" DESCRIPTION "Increased two nodes hwPhysicalPortCrcPerAlarmCoefficientStatistics and hwPhysicalPortCrcPerAlarmPowerStatistics." REVISION "201310281016Z" DESCRIPTION "Add hwNotSameBoardInTrunk" REVISION "201310142026Z" DESCRIPTION "Add hwPortDescription." REVISION "201309060954Z" DESCRIPTION "Add four nodes hwPhysicalPortCrcSd and hwPhysicalPortCrcSdResume and hwPhysicalPortCrcExc and hwPhysicalPortCrcExcResume." REVISION "201308082127Z" DESCRIPTION "Add hwPhysicalPortAutoDetectFail and hwPhysicalPortAutoDetectSuccess." REVISION "201307091716Z" DESCRIPTION "Add hwPortLine and hwPortIfStatistics." REVISION "201307051425Z" DESCRIPTION "Add one nodes hwCposVc4Flag and one STRING object hwPhysicalPortAlarmName ." REVISION "201306271422Z" DESCRIPTION "Add hwPortProtectGroupCfg." REVISION "201306141851Z" DESCRIPTION "Add half-duplex alarm." REVISION "201305311751Z" DESCRIPTION "Add negotiation failed alarm." REVISION "201305081751Z" DESCRIPTION "THE PRIVATE MIB FILE INCLUDES THE GENERAL EXTENT INFORMATION OF THE DEVICE.HWDATACOMM(157).HWPORTMIB" REVISION "201303251039Z" DESCRIPTION "Increased two nodes hwCopperPolarityError and hwCopperPolarityErrorResume." REVISION "201105180930Z" DESCRIPTION "Initial version." ::= { hwDatacomm 157 } hwPortMIBObjects OBJECT IDENTIFIER ::= { hwPortMIB 1 } hwEthernet OBJECT IDENTIFIER ::= { hwPortMIBObjects 1 } hwEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces." ::= { hwEthernet 1 } hwEthernetEntry OBJECT-TYPE SYNTAX HwEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces." INDEX { hwEthernetIfIndex } ::= { hwEthernetTable 1 } HwEthernetEntry ::= SEQUENCE { hwEthernetIfIndex InterfaceIndex, hwEthernetLoopback INTEGER, hwEthernetPortType INTEGER, hwEthernetSpeedSet INTEGER, hwEthernetDuplex INTEGER, hwEthernetNegotiation EnabledStatus, hwEthernetPortTypeOperate INTEGER, hwEthernetClock INTEGER, hwEthernetFlagJ0Mode INTEGER, hwEthernetFlagJ0Value Integer32, hwEthernetFlagJ0Trace OCTET STRING, hwEthernetFlagJ1Mode INTEGER, hwEthernetFlagJ1Value Integer32, hwEthernetFlagJ1Trace OCTET STRING, hwEthernetFlagC2Value Integer32, hwEthernetUpHoldTime Integer32, hwEthernetDownHoldTime Integer32, hwEthernetSubinterfaceStatisticEnable EnabledStatus, hwEthernetFlowControl INTEGER, hwEthernetOffline INTEGER, hwEthernetSetTransferMode INTEGER, hwEthernetJumboframeMaxLength Integer32, hwEthernetComboType INTEGER, hwEthernetPortMode INTEGER, hwEthernetNegotiationMode INTEGER } hwEthernetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwEthernetEntry 1 } hwEthernetLoopback OBJECT-TYPE SYNTAX INTEGER {otherLoop(1),stopLoopback(2),local(3),remote(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The local loopback of an Ethernet interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used." ::= { hwEthernetEntry 11 } hwEthernetPortType OBJECT-TYPE SYNTAX INTEGER {other(1),copper(2),fiber(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the type of the Ethernet interface: an optical interface or an electrical interface." ::= { hwEthernetEntry 12 } hwEthernetSpeedSet OBJECT-TYPE SYNTAX INTEGER {other(1),speed10(2),speed100(3),speed1000(4),speed10000(5),speed40000(6),speed20000(7),speed2500(8),speed5000(9),speed100000(10),speed12000(11),speed48000(12)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the speed of the Ethernet interface. This parameter takes effect only on some Ethernet electrical interfaces rather than optical interfaces. The parameter can be 10 M, 100 M, 1000 M, 10000 M,40000 M,20000 M,2500 M,5000 M,100000 M,12000 M,48000 M." ::= { hwEthernetEntry 13 } hwEthernetDuplex OBJECT-TYPE SYNTAX INTEGER {full(1),half(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode." ::= { hwEthernetEntry 14 } hwEthernetNegotiation OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the auto-negotiation mode of the Ethernet electrical interface. By default, auto-negotiation is enabled. The three objects, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNegotiation are associated with each other. If the auto-negotiation of hwEthernetNegotiation is enabled, the values of hwEthernetSpeedSet and hwEthernetDuplex are auto-negotiated. If hwEthernetSpeedSet is set to a certain value, hwEthernetDuplex is modified to the default value full, and hwEthernetNegotiation is automatically changed to disable. If the auto-negotiation of hwEthernetNegotiation is enabled, hwEthernetDuplex cannot be set." ::= { hwEthernetEntry 15 } hwEthernetPortTypeOperate OBJECT-TYPE SYNTAX INTEGER {other(1),copper(2),fiber100(3),fiber1000(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the link type of the Ethernet interface. The type can be optical link or electrical link. This parameter takes effect only on specific Ethernet interfaces." ::= { hwEthernetEntry 16 } hwEthernetClock OBJECT-TYPE SYNTAX INTEGER {master(1),slave(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode of the clock. The mode can be master or slave. By default, the mode of a clock is slave. This parameter takes effect only on the WAN board." ::= { hwEthernetEntry 20 } hwEthernetFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER {j01ByteMode(1),j016ByteMode(2),j064ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Before the 10 GE WAN board processes packets, the overhead byte must be configured on the interface. The overhead byte for the SDH frame, j0: Set section trace byte The default value is j016ByteMode(2):hwEthernetFlagJ0Trace:NetEngine" ::= { hwEthernetEntry 21 } hwEthernetFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "j01ByteMode Value. When hwEthernetFlagJ0Mode is set to j01ByteMode, this parameter takes effect." ::= { hwEthernetEntry 22 } hwEthernetFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwEthernetEntry 23 } hwEthernetFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER {j11ByteMode(1),j116ByteMode(2),j164ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1:sets path trace byte. The default value is j116ByteMode(2) hwEthernetFlagJ1Trace NetEngine." ::= { hwEthernetEntry 24 } hwEthernetFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "j11ByteMode Value. When hwEthernetFlagJ1Mode is set to j11ByteMode, this parameter takes effect." ::= { hwEthernetEntry 25 } hwEthernetFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwEthernetEntry 26 } hwEthernetFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02." ::= { hwEthernetEntry 27 } hwEthernetUpHoldTime OBJECT-TYPE SYNTAX Integer32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the response time to the event that the port turns Up. The units of hwEthernetUpHoldTime is millisecond." ::= { hwEthernetEntry 31 } hwEthernetDownHoldTime OBJECT-TYPE SYNTAX Integer32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the response time to the event that the port turns Down. The units of hwEthernetDownHoldTime is millisecond." ::= { hwEthernetEntry 32 } hwEthernetSubinterfaceStatisticEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the statistical function of the sub-interface." ::= { hwEthernetEntry 33 } hwEthernetFlowControl OBJECT-TYPE SYNTAX INTEGER {receive(1),send(2),both(3),none(4),default(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set flow control of this port." ::= { hwEthernetEntry 34 } hwEthernetOffline OBJECT-TYPE SYNTAX INTEGER {true(1),false(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set Line protocol state to down of this port." ::= { hwEthernetEntry 35 } hwEthernetSetTransferMode OBJECT-TYPE SYNTAX INTEGER {lan(1),wan(2),none(3),otn(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set transfer mode of this port." ::= { hwEthernetEntry 36 } hwEthernetJumboframeMaxLength OBJECT-TYPE SYNTAX Integer32 (1536..16000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the jumboframe max length of this port." ::= { hwEthernetEntry 37 } hwEthernetComboType OBJECT-TYPE SYNTAX INTEGER {auto(1),copper(2),fiber(3),other(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "combo mode of this port." ::= { hwEthernetEntry 38 } hwEthernetPortMode OBJECT-TYPE SYNTAX INTEGER {copper(1),fiber(2),other(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates combo mode of this port." ::= { hwEthernetEntry 39 } hwEthernetNegotiationMode OBJECT-TYPE SYNTAX INTEGER {notsupport(1),auto(2),master(3),slave(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock. " ::= { hwEthernetEntry 40 } hwPos OBJECT IDENTIFIER ::= { hwPortMIBObjects 2 } hwPosTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface." ::= { hwPos 1 } hwPosEntry OBJECT-TYPE SYNTAX HwPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface." INDEX { hwPosIfIndex } ::= { hwPosTable 1 } HwPosEntry ::= SEQUENCE { hwPosIfIndex InterfaceIndex, hwPosLinkProtocol INTEGER, hwPosFrameFormat INTEGER, hwPosLoopback INTEGER, hwPosScramble EnabledStatus, hwPosClock INTEGER, hwPosCrcVerifyCode INTEGER, hwPosFlagJ0Mode INTEGER, hwPosFlagJ0Value Integer32, hwPosFlagJ0Trace OCTET STRING, hwPosFlagJ1Mode INTEGER, hwPosFlagJ1Value Integer32, hwPosFlagJ1Trace OCTET STRING, hwPosFlagC2Value Integer32 } hwPosIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwPosEntry 1 } hwPosLinkProtocol OBJECT-TYPE SYNTAX INTEGER {ietf(1),nonstandard(2),hdlc(3),ppp(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the link layer protocol of the POS interface. By default, on a POS interface, PPP serves as the link layer protocol." ::= { hwPosEntry 11 } hwPosFrameFormat OBJECT-TYPE SYNTAX INTEGER {sonet(1),sdh(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame type of the POS interface. By default, the frame type of the POS interface is SDH. This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { hwPosEntry 12 } hwPosLoopback OBJECT-TYPE SYNTAX INTEGER {otherLoop(1),stopLoopback(2),local(3),remote(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The local loopback of a POS interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used." ::= { hwPosEntry 13 } hwPosScramble OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the scramble function of payload. By default, the scramble function of payload is enabled." ::= { hwPosEntry 14 } hwPosClock OBJECT-TYPE SYNTAX INTEGER {master(1),slave(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode." ::= { hwPosEntry 15 } hwPosCrcVerifyCode OBJECT-TYPE SYNTAX INTEGER {crc16(1),crc32(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the length of the CRC verity code. The default value is 32." ::= { hwPosEntry 16 } hwPosFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER {j01ByteMode(1),j016ByteMode(2),j064ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwPosFlagJ0Trace:NetEngine." ::= { hwPosEntry 21 } hwPosFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j01ByteMode. When hwPosFlagJ0Mode is set to j01ByteMode, hwPosFlagJ0Value takes effect." ::= { hwPosEntry 22 } hwPosFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte." ::= { hwPosEntry 23 } hwPosFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER {j11ByteMode(1),j116ByteMode(2),j164ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwPosFlagJ1Trace:NetEngine." ::= { hwPosEntry 24 } hwPosFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j11ByteMode. When hwPosFlagJ1Mode is set to j11ByteMode, hwPosFlagJ1Value takes effect." ::= { hwPosEntry 25 } hwPosFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwPosFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwPosFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwPosEntry 26 } hwPosFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02." ::= { hwPosEntry 27 } hwCpos OBJECT IDENTIFIER ::= { hwPortMIBObjects 3 } hwCposTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCposEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface." ::= { hwCpos 1 } hwCposEntry OBJECT-TYPE SYNTAX HwCposEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface." INDEX { hwCposIfIndex } ::= { hwCposTable 1 } HwCposEntry ::= SEQUENCE { hwCposIfIndex InterfaceIndex, hwCposClock INTEGER, hwCposIfType INTEGER, hwCposFrameFormat INTEGER, hwCposMultiplex INTEGER, hwCposLoopback INTEGER, hwCposFlagJ0Mode INTEGER, hwCposFlagJ0Value Integer32, hwCposFlagJ0Trace OCTET STRING, hwCposFlagJ1Mode INTEGER, hwCposFlagJ1Value Integer32, hwCposFlagJ1Trace OCTET STRING, hwCposFlagC2Value Integer32, hwCposB1SdAlarmThreshold Integer32, hwCposB1ExcAlarmThreshold Integer32, hwCposB2SdAlarmThreshold Integer32, hwCposB2ExcAlarmThreshold Integer32, hwCposB3SdAlarmThreshold Integer32, hwCposB3ExcAlarmThreshold Integer32, hwCposLpBipSdAlarmThreshold Integer32, hwCposLpBipExcAlarmThreshold Integer32, hwCposHighPathNumber Integer32, hwCposLowPathNumber Integer32, hwCposMappingMode INTEGER, hwCposRxJ0Mode INTEGER, hwCposRxJ1Mode INTEGER, hwCposRxJ0Value Integer32, hwCposRxJ1Value Integer32, hwCposRxJ0Trace OCTET STRING, hwCposRxJ1Trace OCTET STRING, hwCposVc4Flag Integer32 } hwCposIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwCposEntry 1 } hwCposClock OBJECT-TYPE SYNTAX INTEGER {master(1),slave(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode." ::= { hwCposEntry 11 } hwCposIfType OBJECT-TYPE SYNTAX INTEGER {stm1(1),stm16(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface type." ::= { hwCposEntry 12 } hwCposFrameFormat OBJECT-TYPE SYNTAX INTEGER {sonet(1),sdh(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH." ::= { hwCposEntry 13 } hwCposMultiplex OBJECT-TYPE SYNTAX INTEGER {au3(1),au4(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4." ::= { hwCposEntry 14 } hwCposLoopback OBJECT-TYPE SYNTAX INTEGER {otherloop(1),stopLoopback(2),local(3),remote(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled." ::= { hwCposEntry 15 } hwCposFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER {j01ByteMode(1),j016ByteMode(2),j064ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine." ::= { hwCposEntry 21 } hwCposFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect." ::= { hwCposEntry 22 } hwCposFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwCposFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwCposEntry 23 } hwCposFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER {j11ByteMode(1),j116ByteMode(2),j164ByteOrNullMode(3),peer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine." ::= { hwCposEntry 24 } hwCposFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect." ::= { hwCposEntry 25 } hwCposFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte. When hwCposFlagJ1Mode is set to j164ByteOrNullMode, this variable is a string up to 64 characters trace byte." ::= { hwCposEntry 26 } hwCposFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 27 } hwCposB1SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B1 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 28 } hwCposB1ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B1 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 29 } hwCposB2SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B2 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 30 } hwCposB2ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B2 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 31 } hwCposB3SdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B3 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 32 } hwCposB3ExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of B3 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 33 } hwCposLpBipSdAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of BIP2 threshold crossing alarm." DEFVAL { 6 } ::= { hwCposEntry 34 } hwCposLpBipExcAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold of BIP2 threshold crossing alarm." DEFVAL { 3 } ::= { hwCposEntry 35 } hwCposHighPathNumber OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 36 } hwCposLowPathNumber OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16)." ::= { hwCposEntry 37 } hwCposMappingMode OBJECT-TYPE SYNTAX INTEGER {hMode(1),lMode(2),aMode(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mapping mode of cpos port, default if h-mode(1)." ::= { hwCposEntry 38 } hwCposRxJ0Mode OBJECT-TYPE SYNTAX INTEGER {j01ByteMode(1),j016ByteMode(2),j064ByteOrNullMode(3),peer(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J0 mode." ::= { hwCposEntry 39 } hwCposRxJ1Mode OBJECT-TYPE SYNTAX INTEGER {j11ByteMode(1),j116ByteMode(2),j164ByteOrNullMode(3),peer(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J1 mode." ::= { hwCposEntry 40 } hwCposRxJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J0 value of 1-byte mode." ::= { hwCposEntry 41 } hwCposRxJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J1 value of 1-byte mode." ::= { hwCposEntry 42 } hwCposRxJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J0 characters of 16-byte or 64-byte mode." ::= { hwCposEntry 43 } hwCposRxJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J1 characters of 16-byte or 64-byte mode." ::= { hwCposEntry 44 } hwCposVc4Flag OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies whether a VC4 channel can be created on the CPOS interface. 0 indicates that no VC4 channel can be created on the CPOS interface. 1 indicates that a VC4 channel can be created but has not been created on the CPOS interface. 2 indicates that a VC4 channel can be created and has been created on the CPOS interface." ::= { hwCposEntry 45 } hwPortPhysicalHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the higher order path number." ::= { hwCpos 2 } hwPortPhysicalLpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the low order path number." ::= { hwCpos 3 } hwCposLpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwCposLpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCpos 4 } hwCposLpEntry OBJECT-TYPE SYNTAX HwCposLpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { hwCposLpIfIndex,hwCposLpId } ::= { hwCposLpTable 1 } HwCposLpEntry ::= SEQUENCE { hwCposLpIfIndex InterfaceIndex, hwCposLpId Integer32, hwCposFlagJ2Mode INTEGER, hwCposFlagJ2Value Integer32, hwCposFlagJ2Trace OCTET STRING, hwCposRxJ2Mode INTEGER, hwCposRxJ2Value Integer32, hwCposRxJ2Trace OCTET STRING } hwCposLpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 1 } hwCposLpId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 2 } hwCposFlagJ2Mode OBJECT-TYPE SYNTAX INTEGER {j21ByteMode(1),j216ByteMode(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 3 } hwCposFlagJ2Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 4 } hwCposFlagJ2Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwCposLpEntry 5 } hwCposRxJ2Mode OBJECT-TYPE SYNTAX INTEGER {j21ByteMode(1),j216ByteMode(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J2 mode." ::= { hwCposLpEntry 6 } hwCposRxJ2Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J2 value of 1-byte mode." ::= { hwCposLpEntry 7 } hwCposRxJ2Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the received J2 characters of 16-byte or 64-byte mode." ::= { hwCposLpEntry 8 } hwDs0ChannelBundle OBJECT IDENTIFIER ::= { hwPortMIBObjects 4 } hwDs0ChannelBundleTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDs0ChannelBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to bundle timeslots of CE1/CT1 interfaces." ::= { hwDs0ChannelBundle 1 } hwDs0ChannelBundleEntry OBJECT-TYPE SYNTAX HwDs0ChannelBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to bundle timeslots of CE1/CT1 interfaces." INDEX { hwDs0ChannelBundleParentIfIndex,hwDs0ChannelBundleDs1ChannelId,hwDs0ChannelBundleId } ::= { hwDs0ChannelBundleTable 1 } HwDs0ChannelBundleEntry ::= SEQUENCE { hwDs0ChannelBundleParentIfIndex InterfaceIndex, hwDs0ChannelBundleDs1ChannelId Integer32, hwDs0ChannelBundleId Integer32, hwDs0ChannelBundleIfIndex InterfaceIndex, hwDs0ChannelBundleTimeSlots OCTET STRING, hwDs0ChannelBundleSpeed INTEGER, hwDs0ChannelBundleTimeSlot0 TruthValue, hwDs0ChannelBundleIsMasterPW INTEGER, hwDs0ChannelBundleMasterPWStatus INTEGER, hwDs0ChannelBundlePortName OCTET STRING, hwDs0ChannelBundleRowStatus RowStatus } hwDs0ChannelBundleParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs0ChannelBundleEntry 1 } hwDs0ChannelBundleDs1ChannelId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the channel ID." ::= { hwDs0ChannelBundleEntry 2 } hwDs0ChannelBundleId OBJECT-TYPE SYNTAX Integer32 (0..30) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the index number of the channel set." ::= { hwDs0ChannelBundleEntry 3 } hwDs0ChannelBundleIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the serial interface formed by the timeslot binding." ::= { hwDs0ChannelBundleEntry 11 } hwDs0ChannelBundleTimeSlots OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..61)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If the timeslots are '0-31', it means unframed format, If the timeslots are '0-30', it means framed format, For T1 card mode: If the timeslots are '0-23', it means unframed format, If the timeslots are '0-22', it means framed format, and hwDs0ChannelBundleDs1ChannelId and hwDs0ChannelBundleId should be zero." ::= { hwDs0ChannelBundleEntry 12 } hwDs0ChannelBundleSpeed OBJECT-TYPE SYNTAX INTEGER {s56(1),s64(2),s150336(3)} UNITS "kilo bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Configures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 kbit/s. If the parameter 150336 k is selected, the interface is used for remarking the CEP interface. The default value is 64kbit/s." DEFVAL { 64 } ::= { hwDs0ChannelBundleEntry 13 } hwDs0ChannelBundleTimeSlot0 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel." ::= { hwDs0ChannelBundleEntry 14 } hwDs0ChannelBundleIsMasterPW OBJECT-TYPE SYNTAX INTEGER {notacrpw(0),masterpw(1),notmasterpw(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the pw configed on this port is master pw." DEFVAL { 0 } ::= { hwDs0ChannelBundleEntry 15 } hwDs0ChannelBundleMasterPWStatus OBJECT-TYPE SYNTAX INTEGER {unlock(0),lock(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of master pw." DEFVAL { 0 } ::= { hwDs0ChannelBundleEntry 16 } hwDs0ChannelBundlePortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Port name." ::= { hwDs0ChannelBundleEntry 17 } hwDs0ChannelBundleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs0ChannelBundleEntry 51 } hwDs1 OBJECT IDENTIFIER ::= { hwPortMIBObjects 5 } hwDs1Table OBJECT-TYPE SYNTAX SEQUENCE OF HwDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces." ::= { hwDs1 1 } hwDs1Entry OBJECT-TYPE SYNTAX HwDs1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces." INDEX { hwDs1ParentIfIndex,hwDs1ChannelId,hwDs1IfIndex } ::= { hwDs1Table 1 } HwDs1Entry ::= SEQUENCE { hwDs1ParentIfIndex InterfaceIndex, hwDs1ChannelId Integer32, hwDs1IfIndex InterfaceIndex, hwDs1ChannelType INTEGER, hwDs1IfType INTEGER, hwDs1Channelized TruthValue, hwDs1CodeType INTEGER, hwDs1Clock INTEGER, hwDs1FrameFormat INTEGER, hwDs1Cable INTEGER, hwDs1Loopback INTEGER, hwDs1ClockRecoveryDomain Integer32, hwDs1PWClockDomain Integer32, hwDs1WorkMode Integer32, hwDs1EsAlarmTriggerThreshold Integer32, hwDs1EsAlarmResumeThreshold Integer32, hwDs1RowStatus RowStatus, hwDs1Lbo INTEGER, hwDs1CableLength INTEGER } hwDs1ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs1Entry 1 } hwDs1ChannelId OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the channel ID." ::= { hwDs1Entry 2 } hwDs1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwDs1Entry 3 } hwDs1ChannelType OBJECT-TYPE SYNTAX INTEGER {t1(1),e1(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type. The type can be E1/CE1 or T1/CT1." ::= { hwDs1Entry 11 } hwDs1IfType OBJECT-TYPE SYNTAX INTEGER {e3(1),t3(2),cpos(3),atm(4),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical interface. default:none" DEFVAL { none } ::= { hwDs1Entry 12 } hwDs1Channelized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true." DEFVAL { true } ::= { hwDs1Entry 13 } hwDs1CodeType OBJECT-TYPE SYNTAX INTEGER {ami(1),hdb3(2),b8zs(3),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported" DEFVAL { hdb3 } ::= { hwDs1Entry 14 } hwDs1Clock OBJECT-TYPE SYNTAX INTEGER {master(1),slave(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal." ::= { hwDs1Entry 15 } hwDs1FrameFormat OBJECT-TYPE SYNTAX INTEGER {esf(1),sf(2),noCrc4(3),crc(4)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that the frame format is Extended Super Frame. By default, the frame format of an E1 interface is no-crc4. By default, the frame format of a T1 interface is esf." ::= { hwDs1Entry 16 } hwDs1Cable OBJECT-TYPE SYNTAX INTEGER {long(1),short(2),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null." DEFVAL { short } ::= { hwDs1Entry 17 } hwDs1Loopback OBJECT-TYPE SYNTAX INTEGER {local(1),remote(2),payload(3),cell(4),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip." DEFVAL { none } ::= { hwDs1Entry 18 } hwDs1ClockRecoveryDomain OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." DEFVAL { 0 } ::= { hwDs1Entry 19 } hwDs1PWClockDomain OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." DEFVAL { 0 } ::= { hwDs1Entry 20 } hwDs1WorkMode OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the clock recovery domain of the interface." DEFVAL { 0 } ::= { hwDs1Entry 21 } hwDs1EsAlarmTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-write STATUS current DESCRIPTION "The trigger threshold of code violation count threshold crossing alarm of E1 line side ." DEFVAL { 65 } ::= { hwDs1Entry 22 } hwDs1EsAlarmResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-write STATUS current DESCRIPTION "The resume threshold of code violation count threshold crossing alarm of E1 line side ." DEFVAL { 30 } ::= { hwDs1Entry 23 } hwDs1RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs1Entry 51 } hwDs1Lbo OBJECT-TYPE SYNTAX INTEGER {db75(1),db155(2),db225(3),none(4),notsupport(5)} MAX-ACCESS read-create STATUS current DESCRIPTION "The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times" ::= { hwDs1Entry 52 } hwDs1CableLength OBJECT-TYPE SYNTAX INTEGER {length133(1),length266(2),length399(3),length533(4),length655(5),notsupport(6),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "The cableLength of T1 port. Unit: feet." ::= { hwDs1Entry 53 } hwDs3 OBJECT IDENTIFIER ::= { hwPortMIBObjects 6 } hwDs3Table OBJECT-TYPE SYNTAX SEQUENCE OF HwDs3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E3/CE3 interfaces or all T3/CT3 interfaces." ::= { hwDs3 1 } hwDs3Entry OBJECT-TYPE SYNTAX HwDs3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists all E3/CE3 interfaces or all T3/CT3 interfaces." INDEX { hwDs3ParentIfIndex,hwDs3ChannelId,hwDs3IfIndex } ::= { hwDs3Table 1 } HwDs3Entry ::= SEQUENCE { hwDs3ParentIfIndex InterfaceIndex, hwDs3ChannelId Integer32, hwDs3IfIndex InterfaceIndex, hwDs3ChannelType INTEGER, hwDs3IfType INTEGER, hwDs3Channelized TruthValue, hwDs3Clock INTEGER, hwDs3FrameFormat INTEGER, hwDs3Scramble TruthValue, hwDs3Cable INTEGER, hwDs3NationalBit INTEGER, hwDs3Loopback INTEGER, hwDs3CreateSerial TruthValue, hwDs3RowStatus RowStatus } hwDs3ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs3Entry 1 } hwDs3ChannelId OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the parent interface." ::= { hwDs3Entry 2 } hwDs3IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwDs3Entry 3 } hwDs3ChannelType OBJECT-TYPE SYNTAX INTEGER {t3(1),e3(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interface type. The type can be E3/CE3 or T3/CT3." ::= { hwDs3Entry 11 } hwDs3IfType OBJECT-TYPE SYNTAX INTEGER {cpos(1),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none." DEFVAL { none } ::= { hwDs3Entry 12 } hwDs3Channelized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true." DEFVAL { true } ::= { hwDs3Entry 13 } hwDs3Clock OBJECT-TYPE SYNTAX INTEGER {master(1),slave(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal." ::= { hwDs3Entry 14 } hwDs3FrameFormat OBJECT-TYPE SYNTAX INTEGER {g832Adm(1),g751Adm(2),g751Plcp(3),cbitAdm(4),cbitPlcp(5),m23Adm(6),m23Plcp(7)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the frame format of the interface." ::= { hwDs3Entry 15 } hwDs3Scramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false." DEFVAL { false } ::= { hwDs3Entry 16 } hwDs3Cable OBJECT-TYPE SYNTAX INTEGER {long(1),short(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null." DEFVAL { short } ::= { hwDs3Entry 17 } hwDs3NationalBit OBJECT-TYPE SYNTAX INTEGER {n0(1),n1(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports the international communication. " DEFVAL { n0 } ::= { hwDs3Entry 18 } hwDs3Loopback OBJECT-TYPE SYNTAX INTEGER {local(1),remote(2),payload(3),cell(4),none(255)} MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip." DEFVAL { none } ::= { hwDs3Entry 19 } hwDs3CreateSerial OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Create serial interface from Ds3 interface. True create serial interface. False destroy serial interface. " DEFVAL { false } ::= { hwDs3Entry 20 } hwDs3RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwDs3Entry 51 } hwBundleSerial OBJECT IDENTIFIER ::= { hwPortMIBObjects 7 } hwBundleSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF HwBundleSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface." ::= { hwBundleSerial 1 } hwBundleSerialEntry OBJECT-TYPE SYNTAX HwBundleSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface." INDEX { hwBundleSerialIfIndex } ::= { hwBundleSerialTable 1 } HwBundleSerialEntry ::= SEQUENCE { hwBundleSerialIfIndex InterfaceIndex, hwBundleSerialLinkProtocol INTEGER, hwBundleSerialTimerHold Integer32, hwBundleSerialLoopback TruthValue, hwBundleSerialCrcVerifyCode INTEGER } hwBundleSerialIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of serial(s) present on the device ." ::= { hwBundleSerialEntry 1 } hwBundleSerialLinkProtocol OBJECT-TYPE SYNTAX INTEGER {ietf(1),nonstandard(2),hdlc(3),ppp(4),lapb(5),atm(6),tdm(7),none(255)} MAX-ACCESS read-write STATUS current DESCRIPTION "The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default." ::= { hwBundleSerialEntry 11 } hwBundleSerialTimerHold OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds." ::= { hwBundleSerialEntry 12 } hwBundleSerialLoopback OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled." DEFVAL { false } ::= { hwBundleSerialEntry 13 } hwBundleSerialCrcVerifyCode OBJECT-TYPE SYNTAX INTEGER {crc16(1),crc32(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the length of the CRC verify code. The default is 32." ::= { hwBundleSerialEntry 14 } hwPhysicalPort OBJECT IDENTIFIER ::= { hwPortMIBObjects 8 } hwPhysicalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPhysicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the physical port." ::= { hwPhysicalPort 1 } hwPhysicalPortEntry OBJECT-TYPE SYNTAX HwPhysicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the physical port." INDEX { hwPhysicalPortIfIndex } ::= { hwPhysicalPortTable 1 } HwPhysicalPortEntry ::= SEQUENCE { hwPhysicalPortIfIndex InterfaceIndex, hwPhysicalPortDelayTime Unsigned32, hwPhysicalPortDelayRemainTime Unsigned32, hwPhysicalPortName OCTET STRING, hwPhysicalPortInChassis Integer32, hwPhysicalPortInSlot Integer32, hwPhysicalPortInCard Integer32, hwPhysicalPortInPort Integer32, hwPhysicalAutoShutLaserEnable INTEGER, hwPhysicalAutoShutLaserOpenInterval Integer32, hwPhysicalAutoShutLaserCloseInterval Integer32, hwPhysicalAutoShutLaserLongOpenInterval Integer32, hwPhysicalLoopbackType INTEGER, hwPhysicalShutLaser INTEGER, hwPhysicalLaserStatus INTEGER, hwPhysicalPortHoldUp INTEGER, hwPhysicalPortAlarmInverseEnable INTEGER, hwPhysicalPortInVsId Integer32, hwPhysicalPortAlarmName OCTET STRING, hwInputRateChangeThresholdPercent Integer32, hwOutputRateChangeThresholdPercent Integer32, hwCurrentStatisticalPeriodRate Counter64, hwLastStatisticalPeriodRate Counter64, hwPortPhysicalRate Integer32, hwLicenseType OCTET STRING, hwMaxPortNum Integer32, hwUsedPortNum Integer32, hwPhysicalPortMode INTEGER, hwScadaGroupId Integer32, hwPhysicalPortGroupID OCTET STRING, hwPortTransModeReasonDescr OCTET STRING, hwAcBlockReason OCTET STRING } hwPhysicalPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device ." ::= { hwPhysicalPortEntry 1 } hwPhysicalPortDelayTime OBJECT-TYPE SYNTAX Unsigned32 (0..86400000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the port tx enabling delay time. The units of hwPhysicalPortDelayTime is millisecond. The default value is 0 ms. " DEFVAL { 0 } ::= { hwPhysicalPortEntry 2 } hwPhysicalPortDelayRemainTime OBJECT-TYPE SYNTAX Unsigned32 (0..86400000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the remnant time of enabling port-tx. The units of hwPhysicalPortDelayTime is millisecond." ::= { hwPhysicalPortEntry 3 } hwPhysicalPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port name." ::= { hwPhysicalPortEntry 4 } hwPhysicalPortInChassis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port in chassis." ::= { hwPhysicalPortEntry 5 } hwPhysicalPortInSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SlotID." ::= { hwPhysicalPortEntry 6 } hwPhysicalPortInCard OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CardID." ::= { hwPhysicalPortEntry 7 } hwPhysicalPortInPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PortID." ::= { hwPhysicalPortEntry 8 } hwPhysicalAutoShutLaserEnable OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2),notsupport(255)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates enable or disable the laser auto shut . Default is disable." ::= { hwPhysicalPortEntry 9 } hwPhysicalAutoShutLaserOpenInterval OBJECT-TYPE SYNTAX Integer32 (100..300 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the open interval of laser auto shut . The default value is 200 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 10 } hwPhysicalAutoShutLaserCloseInterval OBJECT-TYPE SYNTAX Integer32 (200..30000 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the close interval of laser auto shut . The default value is 6000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 11 } hwPhysicalAutoShutLaserLongOpenInterval OBJECT-TYPE SYNTAX Integer32 (200..30000 | 2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the long open interval of laser auto shut . The default value is 9000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut." ::= { hwPhysicalPortEntry 12 } hwPhysicalLoopbackType OBJECT-TYPE SYNTAX INTEGER {stopLoopback(0),local(1),remote(2)} MAX-ACCESS read-only STATUS current DESCRIPTION " The current state of loopbackType in port." ::= { hwPhysicalPortEntry 13 } hwPhysicalShutLaser OBJECT-TYPE SYNTAX INTEGER {off(1),on(2),notsupport(255)} MAX-ACCESS read-write STATUS current DESCRIPTION " Turn on or turn off the laser." ::= { hwPhysicalPortEntry 14 } hwPhysicalLaserStatus OBJECT-TYPE SYNTAX INTEGER {off(1),on(2),offline(3),notsupport(255)} MAX-ACCESS read-only STATUS current DESCRIPTION " The current status of the laser." ::= { hwPhysicalPortEntry 15 } hwPhysicalPortHoldUp OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates enable or disable the interface to remain Up , the default value is disable." ::= { hwPhysicalPortEntry 16 } hwPhysicalPortAlarmInverseEnable OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Config port alarm inverse enable." ::= { hwPhysicalPortEntry 17 } hwPhysicalPortInVsId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "VsId." ::= { hwPhysicalPortEntry 18 } hwPhysicalPortAlarmName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port alarm name." ::= { hwPhysicalPortEntry 19 } hwInputRateChangeThresholdPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for the input rate change, in percentage." ::= { hwPhysicalPortEntry 20 } hwOutputRateChangeThresholdPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for the output rate change, in percentage." ::= { hwPhysicalPortEntry 21 } hwCurrentStatisticalPeriodRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate in the current statistical period." ::= { hwPhysicalPortEntry 22 } hwLastStatisticalPeriodRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate in the last statistical period." ::= { hwPhysicalPortEntry 23 } hwPortPhysicalRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current physical rate." ::= { hwPhysicalPortEntry 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25 hwLicenseType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of interface function-controlled license." ::= { hwPhysicalPortEntry 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26 hwMaxPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Maximum number of available interfaces" ::= { hwPhysicalPortEntry 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27 hwUsedPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Number of interfaces in use." ::= { hwPhysicalPortEntry 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28 hwPhysicalPortMode OBJECT-TYPE SYNTAX INTEGER {eth1g(0),eth10g(1)} MAX-ACCESS read-only STATUS current DESCRIPTION " The current state of portMode in port." ::= { hwPhysicalPortEntry 28 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29 hwScadaGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the scada group ID." ::= { hwPhysicalPortEntry 29 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 hwPhysicalPortGroupID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port group ID." ::= { hwPhysicalPortEntry 30 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 hwPortTransModeReasonDescr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical port transmission mode different reason." ::= { hwPhysicalPortEntry 31 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32 hwAcBlockReason OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the AC block reason." ::= { hwPhysicalPortEntry 32 } -- 1.3.6.1.4.1.2011.5.25.157.1.8.2 hwSDHRsMsPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHRsMsPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Regenerator Section." ::= { hwPhysicalPort 2 } hwSDHRsMsPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHRsMsPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Regenerator Section." INDEX { hwSDHRsMsPerfCurrentIfIndex,hwSDHRsMsPerfCurrentDataIndex } ::= { hwSDHRsMsPerfCurrentTable 1 } HwSDHRsMsPerfCurrentEntry ::= SEQUENCE { hwSDHRsMsPerfCurrentIfIndex InterfaceIndex, hwSDHRsMsPerfCurrentDataIndex Integer32, hwSDHRsPerfCurrentBBE Integer32, hwSDHRsPerfCurrentES Integer32, hwSDHRsPerfCurrentSES Integer32, hwSDHRsPerfCurrentUAS Integer32, hwSDHMsPerfCurrentBBE Integer32, hwSDHMsPerfCurrentES Integer32, hwSDHMsPerfCurrentSES Integer32, hwSDHMsPerfCurrentUAS Integer32, hwSDHMsPerfCurrentFEBBE Integer32, hwSDHMsPerfCurrentFEES Integer32, hwSDHMsPerfCurrentFESES Integer32, hwSDHMsPerfCurrentFEUAS Integer32 } hwSDHRsMsPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHRsMsPerfCurrentEntry 1 } hwSDHRsMsPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHRsMsPerfCurrentEntry 2 } hwSDHRsPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 3 } hwSDHRsPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 4 } hwSDHRsPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator Section Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 5 } hwSDHRsPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Regenerator section unavailable second." ::= { hwSDHRsMsPerfCurrentEntry 6 } hwSDHMsPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 7 } hwSDHMsPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 8 } hwSDHMsPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 9 } hwSDHMsPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Unavaliable Seconds." ::= { hwSDHRsMsPerfCurrentEntry 10 } hwSDHMsPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Background Block Error." ::= { hwSDHRsMsPerfCurrentEntry 11 } hwSDHMsPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 12 } hwSDHMsPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Severely Errored Second." ::= { hwSDHRsMsPerfCurrentEntry 13 } hwSDHMsPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Unavaliable Seconds." ::= { hwSDHRsMsPerfCurrentEntry 14 } hwSDHHpPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHHpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Higher order Path." ::= { hwPhysicalPort 3 } hwSDHHpPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHHpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Higher order Path." INDEX { hwSDHHpPerfCurrentIfIndex,hwSDHHpPerfCurrentHpIndex,hwSDHHpPerfCurrentDataIndex } ::= { hwSDHHpPerfCurrentTable 1 } HwSDHHpPerfCurrentEntry ::= SEQUENCE { hwSDHHpPerfCurrentIfIndex InterfaceIndex, hwSDHHpPerfCurrentHpIndex Integer32, hwSDHHpPerfCurrentDataIndex Integer32, hwSDHHpPerfCurrentBBE Integer32, hwSDHHpPerfCurrentES Integer32, hwSDHHpPerfCurrentSES Integer32, hwSDHHpPerfCurrentUAS Integer32, hwSDHHpPerfCurrentFEBBE Integer32, hwSDHHpPerfCurrentFEES Integer32, hwSDHHpPerfCurrentFESES Integer32, hwSDHHpPerfCurrentFEUAS Integer32 } hwSDHHpPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 1 } hwSDHHpPerfCurrentHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Higher order Path index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 2 } hwSDHHpPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHHpPerfCurrentEntry 3 } hwSDHHpPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multiplex Section Far end Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 4 } hwSDHHpPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Errored Second." ::= { hwSDHHpPerfCurrentEntry 5 } hwSDHHpPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Severely Errored Second." ::= { hwSDHHpPerfCurrentEntry 6 } hwSDHHpPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 7 } hwSDHHpPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Background Block Error." ::= { hwSDHHpPerfCurrentEntry 8 } hwSDHHpPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Errored Second." ::= { hwSDHHpPerfCurrentEntry 9 } hwSDHHpPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Severely Errored Second." ::= { hwSDHHpPerfCurrentEntry 10 } hwSDHHpPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Higher order Path Far end Unavaliable Seconds." ::= { hwSDHHpPerfCurrentEntry 11 } hwSDHLpPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSDHLpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Low order Path." ::= { hwPhysicalPort 4 } hwSDHLpPerfCurrentEntry OBJECT-TYPE SYNTAX HwSDHLpPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the Low order Path." INDEX { hwSDHLpPerfCurrentIfIndex,hwSDHLpPerfCurrentHpIndex,hwSDHLpPerfCurrentLpIndex,hwSDHLpPerfCurrentDataIndex } ::= { hwSDHLpPerfCurrentTable 1 } HwSDHLpPerfCurrentEntry ::= SEQUENCE { hwSDHLpPerfCurrentIfIndex InterfaceIndex, hwSDHLpPerfCurrentHpIndex Integer32, hwSDHLpPerfCurrentLpIndex Integer32, hwSDHLpPerfCurrentDataIndex Integer32, hwSDHLpPerfCurrentBBE Integer32, hwSDHLpPerfCurrentES Integer32, hwSDHLpPerfCurrentSES Integer32, hwSDHLpPerfCurrentUAS Integer32, hwSDHLpPerfCurrentFEBBE Integer32, hwSDHLpPerfCurrentFEES Integer32, hwSDHLpPerfCurrentFESES Integer32, hwSDHLpPerfCurrentFEUAS Integer32 } hwSDHLpPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 1 } hwSDHLpPerfCurrentHpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Higher order Path index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 2 } hwSDHLpPerfCurrentLpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Low order Path index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 3 } hwSDHLpPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device ." ::= { hwSDHLpPerfCurrentEntry 4 } hwSDHLpPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Background Block Error." ::= { hwSDHLpPerfCurrentEntry 5 } hwSDHLpPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path errored seconds." ::= { hwSDHLpPerfCurrentEntry 6 } hwSDHLpPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path severely errored seconds." ::= { hwSDHLpPerfCurrentEntry 7 } hwSDHLpPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Unavailable second." ::= { hwSDHLpPerfCurrentEntry 8 } hwSDHLpPerfCurrentFEBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end Background Block Error." ::= { hwSDHLpPerfCurrentEntry 9 } hwSDHLpPerfCurrentFEES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end errored seconds." ::= { hwSDHLpPerfCurrentEntry 10 } hwSDHLpPerfCurrentFESES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end severely errored seconds." ::= { hwSDHLpPerfCurrentEntry 11 } hwSDHLpPerfCurrentFEUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Far-end Unavailable second." ::= { hwSDHLpPerfCurrentEntry 12 } hwPDHPerfCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPDHPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the E1 line side." ::= { hwPhysicalPort 5 } hwPDHPerfCurrentEntry OBJECT-TYPE SYNTAX HwPDHPerfCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the performance stat of the E1 line side." INDEX { hwPDHPerfCurrentIfIndex,hwPDHPerfCurrentDataIndex } ::= { hwPDHPerfCurrentTable 1 } HwPDHPerfCurrentEntry ::= SEQUENCE { hwPDHPerfCurrentIfIndex InterfaceIndex, hwPDHPerfCurrentDataIndex Integer32, hwPDHPerfCurrentBBE Integer32, hwPDHPerfCurrentES Integer32, hwPDHPerfCurrentSES Integer32, hwPDHPerfCurrentUAS Integer32, hwPDHPerfCurrentLCV Integer32 } hwPDHPerfCurrentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwPDHPerfCurrentEntry 1 } hwPDHPerfCurrentDataIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data index(es) of port(s) present on the device." ::= { hwPDHPerfCurrentEntry 2 } hwPDHPerfCurrentBBE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low order Path Background Block Error." ::= { hwPDHPerfCurrentEntry 3 } hwPDHPerfCurrentES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation errored second." ::= { hwPDHPerfCurrentEntry 4 } hwPDHPerfCurrentSES OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation severely errored second." ::= { hwPDHPerfCurrentEntry 5 } hwPDHPerfCurrentUAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation loss-of-signal second." ::= { hwPDHPerfCurrentEntry 6 } hwPDHPerfCurrentLCV OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "E1 line side code violation count." ::= { hwPDHPerfCurrentEntry 7 } hwEthPortStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEthPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the stat of the ethernet interface." ::= { hwPhysicalPort 6 } hwEthPortStatEntry OBJECT-TYPE SYNTAX HwEthPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the stat of the ethernet interface." INDEX { hwEthPortStatIfIndex } ::= { hwEthPortStatTable 1 } HwEthPortStatEntry ::= SEQUENCE { hwEthPortStatIfIndex InterfaceIndex, hwEthPortStatBadBytes Counter64, hwEthPortStatOutPut64Bytes Counter64, hwEthPortStatOutPut65to127Bytes Counter64, hwEthPortStatOutPut128to255Bytes Counter64, hwEthPortStatOutPut256to511Bytes Counter64, hwEthPortStatOutPut512to1023Bytes Counter64, hwEthPortStatOutPut1024to1518Bytes Counter64, hwEthPortStatOutPut1519toMaxBytes Counter64 } hwEthPortStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwEthPortStatEntry 1 } hwEthPortStatBadBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the stat of badbytes." ::= { hwEthPortStatEntry 2 } hwEthPortStatOutPut64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 3 } hwEthPortStatOutPut65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 4 } hwEthPortStatOutPut128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 5 } hwEthPortStatOutPut256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).." ::= { hwEthPortStatEntry 6 } hwEthPortStatOutPut512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 7 } hwEthPortStatOutPut1024to1518Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 8 } hwEthPortStatOutPut1519toMaxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) output that were between 1519 and max length octets in length inclusive (excluding framing bits but including FCS octets)." ::= { hwEthPortStatEntry 9 } hwPhysicalPortGlobleCfg OBJECT IDENTIFIER ::= { hwPhysicalPort 7 } hwLoopBackAutoClearEnable OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "set loopback autoclear status enable(1) disable(2)." DEFVAL { 2 } ::= { hwPhysicalPortGlobleCfg 1 } hwLoopBackAutoClearPeriod OBJECT-TYPE SYNTAX Integer32 (1..2880) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "set loopback autoclear period, unit minute,value range<1-2880> default<5 minute>." DEFVAL { 5 } ::= { hwPhysicalPortGlobleCfg 2 } hwPortAlarmInverseEnable OBJECT-TYPE SYNTAX INTEGER {enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Config globle alarm inverse enable." ::= { hwPhysicalPortGlobleCfg 3 } hwDslGroup OBJECT IDENTIFIER ::= { hwPortMIBObjects 9 } hwDslGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl group." ::= { hwDslGroup 1 } hwDslGroupEntry OBJECT-TYPE SYNTAX HwDslGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group table." INDEX { hwDslGroupIfIndex } ::= { hwDslGroupTable 1 } HwDslGroupEntry ::= SEQUENCE { hwDslGroupIfIndex InterfaceIndex, hwDslGroupWorkMode INTEGER, hwDslGroupBisState INTEGER, hwDslGroupEncapeMode INTEGER, hwDslGroupEnable INTEGER, hwDslGroupRowStatus RowStatus } hwDslGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupEntry 1 } hwDslGroupWorkMode OBJECT-TYPE SYNTAX INTEGER {atm(1),efm(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The dsl group of SHD4 card can work in efm or atm mode. Default is efm. " ::= { hwDslGroupEntry 2 } hwDslGroupBisState OBJECT-TYPE SYNTAX INTEGER {disable(1),enable(2),notSupport(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Bis can be enabled or disabled in ATM mode of SHD4 card." ::= { hwDslGroupEntry 3 } hwDslGroupEncapeMode OBJECT-TYPE SYNTAX INTEGER {eoaLlc(1),eoaVcmux(2),notSupport(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC." ::= { hwDslGroupEntry 4 } hwDslGroupEnable OBJECT-TYPE SYNTAX INTEGER {disable(1),enable(2),notSupport(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger the operation of binding dsl link(s) to the dsl group." ::= { hwDslGroupEntry 5 } hwDslGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupEntry 60 } hwDslGroupBoundVeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupBoundVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl group bound virtual-ethernet." ::= { hwDslGroup 2 } hwDslGroupBoundVeEntry OBJECT-TYPE SYNTAX HwDslGroupBoundVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group bound vitrual-ethernet table." INDEX { hwDslGroupIfIndexOfBound,hwDslGroupPvcId } ::= { hwDslGroupBoundVeTable 1 } HwDslGroupBoundVeEntry ::= SEQUENCE { hwDslGroupIfIndexOfBound InterfaceIndex, hwVirtualEthernetIfIndex InterfaceIndex, hwDslGroupVpi Integer32, hwDslGroupVci Integer32, hwDslGroupPvcId Integer32, hwBoundVeRowStatus RowStatus } hwDslGroupIfIndexOfBound OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupBoundVeEntry 1 } hwVirtualEthernetIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The first virtual ethernet interface which the dsl group is bound to." ::= { hwDslGroupBoundVeEntry 2 } hwDslGroupVpi OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VPI value of the 1st PVC pair." ::= { hwDslGroupBoundVeEntry 3 } hwDslGroupVci OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "VCI value of the 1st PVC pair." ::= { hwDslGroupBoundVeEntry 4 } hwDslGroupPvcId OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier for VPI/VCI Pair." ::= { hwDslGroupBoundVeEntry 5 } hwBoundVeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupBoundVeEntry 50 } hwDslGroupBindVeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupBindVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the relation of the dsl group binding virtual-ethernet." ::= { hwDslGroup 3 } hwDslGroupBindVeEntry OBJECT-TYPE SYNTAX HwDslGroupBindVeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dsl group binding vitrual-ethernet table." INDEX { hwDslGroupInterfaceIndex,hwVirtualEthernetInterfaceIndex } ::= { hwDslGroupBindVeTable 1 } HwDslGroupBindVeEntry ::= SEQUENCE { hwDslGroupInterfaceIndex InterfaceIndex, hwVirtualEthernetInterfaceIndex InterfaceIndex, hwBindVeRowStatus RowStatus } hwDslGroupInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of the dsl group present on the device." ::= { hwDslGroupBindVeEntry 1 } hwVirtualEthernetInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual ethernet interface index which the dsl group is bound to." ::= { hwDslGroupBindVeEntry 2 } hwBindVeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslGroupBindVeEntry 50 } hwDslGroupIma OBJECT IDENTIFIER ::= { hwPortMIBObjects 10 } hwDslGroupImaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslGroupImaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the dsl ima group." ::= { hwDslGroupIma 1 } hwDslGroupImaEntry OBJECT-TYPE SYNTAX HwDslGroupImaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the dsl ima group table." INDEX { hwDslGroupImaIfIndex } ::= { hwDslGroupImaTable 1 } HwDslGroupImaEntry ::= SEQUENCE { hwDslGroupImaIfIndex InterfaceIndex, hwDslGroupImaVersion INTEGER, hwDslGroupImaFrameLen ImaFrameLength, hwDslGroupImaReset INTEGER, hwDslGroupImaTxMinLinkNum Integer32, hwDslGroupImaRxMinLinkNum Integer32, hwDslGroupImaNeState ImaGroupState, hwDslGroupImaFeState ImaGroupState, hwDslGroupImaTxCellRate Integer32, hwDslGroupImaRxCellRate Integer32, hwDslGroupImaTxActLinkNum Integer32, hwDslGroupImaRxActLinkNum Integer32, hwDslGroupImaIfName OCTET STRING } hwDslGroupImaIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of dsl group present on the device." ::= { hwDslGroupImaEntry 1 } hwDslGroupImaVersion OBJECT-TYPE SYNTAX INTEGER {v0(1),v1(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1. " ::= { hwDslGroupImaEntry 2 } hwDslGroupImaFrameLen OBJECT-TYPE SYNTAX ImaFrameLength MAX-ACCESS read-write STATUS current DESCRIPTION "Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128." ::= { hwDslGroupImaEntry 3 } hwDslGroupImaReset OBJECT-TYPE SYNTAX INTEGER {disable(1),enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "ima group reset for SHD4I card." ::= { hwDslGroupImaEntry 4 } hwDslGroupImaTxMinLinkNum OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum active links number by TX direction." ::= { hwDslGroupImaEntry 5 } hwDslGroupImaRxMinLinkNum OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum active links number by RX direction. " ::= { hwDslGroupImaEntry 6 } hwDslGroupImaNeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the near-end ima group." ::= { hwDslGroupImaEntry 7 } hwDslGroupImaFeState OBJECT-TYPE SYNTAX ImaGroupState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the far-end ima group." ::= { hwDslGroupImaEntry 8 } hwDslGroupImaTxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current cell rate of ima group by TX direction." ::= { hwDslGroupImaEntry 9 } hwDslGroupImaRxCellRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current cell rate of ima group by RX direction." ::= { hwDslGroupImaEntry 10 } hwDslGroupImaTxActLinkNum OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active links by TX direction." ::= { hwDslGroupImaEntry 11 } hwDslGroupImaRxActLinkNum OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active links by RX direction." ::= { hwDslGroupImaEntry 12 } hwDslGroupImaIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name of ima group." ::= { hwDslGroupImaEntry 13 } hwDslLink OBJECT IDENTIFIER ::= { hwPortMIBObjects 11 } hwDslLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDslLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dsl link bound relation." ::= { hwDslLink 1 } hwDslLinkEntry OBJECT-TYPE SYNTAX HwDslLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the dsl link bound relation." INDEX { hwBoundDslGroupIfIndex,hwDslLinkIfIndex } ::= { hwDslLinkTable 1 } HwDslLinkEntry ::= SEQUENCE { hwBoundDslGroupIfIndex InterfaceIndex, hwDslLinkIfIndex InterfaceIndex, hwDslLinkIfName OCTET STRING, hwBoundDslGroupIfName OCTET STRING, hwDslLinkBoundRowStatus RowStatus } hwBoundDslGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of dsl group which the dsl link bound to." ::= { hwDslLinkEntry 1 } hwDslLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "Interface index of the dsl link device." ::= { hwDslLinkEntry 2 } hwDslLinkIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name of the dsl link." ::= { hwDslLinkEntry 4 } hwBoundDslGroupIfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of dsl group which the dsl link bound to." ::= { hwDslLinkEntry 5 } hwDslLinkBoundRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "An object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified." ::= { hwDslLinkEntry 50 } hwPWAlarm OBJECT IDENTIFIER ::= { hwPortMIBObjects 12 } hwPWAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the PW alarm." ::= { hwPWAlarm 1 } hwPWAlarmEntry OBJECT-TYPE SYNTAX HwPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the PW alarm relation." INDEX { hwPWAlarmIfIndex } ::= { hwPWAlarmTable 1 } HwPWAlarmEntry ::= SEQUENCE { hwPWAlarmIfIndex InterfaceIndex, hwPWCesVcID Integer32, hwPWCesVcType Integer32, hwPeerIpAddr IpAddress, hwAlarmStatus Integer32, hwPWAlarmRMLEnableStatus EnabledStatus, hwLosAlarmTriggerThreshold Integer32, hwLosAlarmResumeThreshold Integer32, hwPWPortName OCTET STRING, hwLosPktExcTriggerThreshold Integer32, hwLosPktExcResumeThreshold Integer32, hwMisorderPktExcTriggerThreshold Integer32, hwMisorderPktExcResumeThreshold Integer32, hwStrayPktExcTriggerThreshold Integer32, hwStrayPktExcResumeThreshold Integer32, hwMalPktExcTriggerThreshold Integer32, hwMalPktExcResumeThreshold Integer32, hwJtrUdrExcTriggerThreshold Integer32, hwJtrUdrExcResumeThreshold Integer32, hwJtrOvrExcTriggerThreshold Integer32, hwJtrOvrExcResumeThreshold Integer32 } hwPWAlarmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of PW alarm group." ::= { hwPWAlarmEntry 1 } hwPWCesVcID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc ID of PW alarm group." ::= { hwPWAlarmEntry 2 } hwPWCesVcType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc Type of PW alarm group." ::= { hwPWAlarmEntry 3 } hwPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Peer IP Address of PW alarm group." ::= { hwPWAlarmEntry 4 } hwAlarmStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Alarm status of PW alarm group." ::= { hwPWAlarmEntry 5 } hwPWAlarmRMLEnableStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "PW control word RML of PW alarm group." ::= { hwPWAlarmEntry 6 } hwLosAlarmTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (2..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger Threshold of continuous loss packets of PW alarm group." DEFVAL { 100 } ::= { hwPWAlarmEntry 7 } hwLosAlarmResumeThreshold OBJECT-TYPE SYNTAX Integer32 (32..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume Threshold of continuous loss packets of PW alarm group." DEFVAL { 5 } ::= { hwPWAlarmEntry 8 } hwPWPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "PW port name of PW alarm group." ::= { hwPWAlarmEntry 9 } hwLosPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of lost packets of PW alarm group." ::= { hwPWAlarmEntry 10 } hwLosPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of lost packets of PW alarm group." ::= { hwPWAlarmEntry 11 } hwMisorderPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of packets lost due to the out-of-order condition of PW alarm group." ::= { hwPWAlarmEntry 12 } hwMisorderPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of packets lost due to the out-of-order condition of PW alarm group." ::= { hwPWAlarmEntry 13 } hwStrayPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of misconnected packets of PW alarm group." ::= { hwPWAlarmEntry 14 } hwStrayPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of misconnected packets of PW alarm group." ::= { hwPWAlarmEntry 15 } hwMalPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of malformed packets of PW alarm group." ::= { hwPWAlarmEntry 16 } hwMalPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of malformed packets of PW alarm group." ::= { hwPWAlarmEntry 17 } hwJtrUdrExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of jitter buffer underflows of PW alarm group." ::= { hwPWAlarmEntry 18 } hwJtrUdrExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of jitter buffer underflows of PW alarm group." ::= { hwPWAlarmEntry 19 } hwJtrOvrExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of jitter buffer overflows of PW alarm group." ::= { hwPWAlarmEntry 20 } hwJtrOvrExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of jitter buffer overflows of PW alarm group." ::= { hwPWAlarmEntry 21 } hwAtmPWAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attributes of the ATM PW alarm." ::= { hwPWAlarm 2 } hwAtmPWAlarmEntry OBJECT-TYPE SYNTAX HwAtmPWAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the ATM PW alarm relation." INDEX { hwAtmPWAlarmIfIndex } ::= { hwAtmPWAlarmTable 1 } HwAtmPWAlarmEntry ::= SEQUENCE { hwAtmPWAlarmIfIndex InterfaceIndex, hwAtmVcID Integer32, hwAtmVcType Integer32, hwAtmPeerIpAddr IpAddress, hwAtmPWPortName OCTET STRING, hwAtmLosPktExcTriggerThreshold Integer32, hwAtmLosPktExcResumeThreshold Integer32, hwAtmMisorderPktExcTriggerThreshold Integer32, hwAtmMisorderPktExcResumeThreshold Integer32, hwAtmUnknownCellExcTriggerThreshold Integer32, hwAtmUnknownCellExcResumeThreshold Integer32 } hwAtmPWAlarmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 1 } hwAtmVcID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc ID of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 2 } hwAtmVcType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vc Type of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 3 } hwAtmPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Peer IP Address of ATM PW alarm group." ::= { hwAtmPWAlarmEntry 4 } hwAtmPWPortName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "ATM PW port name of PW alarm group." ::= { hwAtmPWAlarmEntry 5 } hwAtmLosPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of lost packets of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 6 } hwAtmLosPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of lost packets of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 7 } hwAtmMisorderPktExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 8 } hwAtmMisorderPktExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 9 } hwAtmUnknownCellExcTriggerThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Trigger threshold of unknown cell of ATM PW alarm group." DEFVAL { 100 } ::= { hwAtmPWAlarmEntry 10 } hwAtmUnknownCellExcResumeThreshold OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Resume threshold of unknown cell of ATM PW alarm group." DEFVAL { 1 } ::= { hwAtmPWAlarmEntry 11 } hwSNMPTrapEn OBJECT IDENTIFIER ::= { hwPortMIBObjects 13 } hwSNMPTrapEnTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSNMPTrapEnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEn 1 } hwSNMPTrapEnEntry OBJECT-TYPE SYNTAX HwSNMPTrapEnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." INDEX { hwSNMPTrapEnIfIndex } ::= { hwSNMPTrapEnTable 1 } HwSNMPTrapEnEntry ::= SEQUENCE { hwSNMPTrapEnIfIndex InterfaceIndex, hwCesPWLopsEn Integer32, hwCesPWRemoteLosPktEn Integer32, hwCesPWOppositeRAIEn Integer32, hwCesPWOppositeAcfaultEn Integer32, hwCesPWLosPktEn Integer32, hwCesPWMisorderPktEn Integer32, hwCesPWStrayPktEn Integer32, hwCesPWMalPktEn Integer32, hwCesPWJtrUnrEn Integer32, hwCesPWJtrOvrEn Integer32, hwCesPWAllEn Integer32, hwPhysicalPortLosAlarmEn Integer32, hwPhysicalPortLofAlarmEn Integer32, hwRsOofAlarmEn Integer32, hwRsB1ExcAlarmEn Integer32, hwRsB1SdAlarmEn Integer32, hwRsJ0TimAlarmEn Integer32, hwMsRdiAlarmEn Integer32, hwMsB2ExcAlarmEn Integer32, hwMsAuLopAlarmEn Integer32, hwMsAisAlarmEn Integer32, hwMsB2SdAlarmEn Integer32, hwHpJ1TimAlarmEn Integer32, hwHpUneqAlarmEn Integer32, hwHpRdiAlarmEn Integer32, hwHpB3ExcAlarmEn Integer32, hwHpPlmAlarmEn Integer32, hwHpB3SdAlarmEn Integer32, hwHpAuAisAlarmEn Integer32, hwLpTuLopAlarmEn Integer32, hwHpTuLomAlarmEn Integer32, hwLpTimAlarmEn Integer32, hwLpUneqAlarmEn Integer32, hwLpRdiAlarmEn Integer32, hwLpBipExcAlarmEn Integer32, hwLpBipSdAlarmEn Integer32, hwLpPlmAlarmEn Integer32, hwLpTuAisAlarmEn Integer32, hwDs1EsExcAlarmEn Integer32, hwDs1RmfaAlarmEn Integer32, hwDs1LmfaAlarmEn Integer32, hwDs1AisAlarmEn Integer32, hwDs1RdiAlarmEn Integer32, hwRsLocAlarmEn Integer32, hwLpRfiAlarmEn Integer32, hwLpV5VcaisAlarmEn Integer32, hwVc12oofAlarmEn Integer32, hwVc12AlmE1RaiAlarmEn Integer32, hwVc12LfaAlarmEn Integer32, hwVc12UpE1AisAlarmEn Integer32, hwVc12DownE1AisAlarmEn Integer32, hwDs1DownE1AisAlarmEn Integer32, hwMsLpsUniBiMAlarmEn Integer32, hwMsK1K2MAlarmEn Integer32, hwMsK2MAlarmEn Integer32, hwVc12LmfaAlarmEn Integer32, hwSDHAllEn Integer32, hwLaserShutAlarmEn Integer32, hwLaserAutoShutAlarmEn Integer32, hwLaserAllEn Integer32, hwLoopbackAlarmEn Integer32, hwChannelLoopbackAlarmEn Integer32, hwLoopbackAllEn Integer32, hwAtmOcdAlarmEn Integer32, hwAtmLcdAlarmEn Integer32, hwAtmUhcsAlarmEn Integer32, hwAtmChcsAlarmEn Integer32, hwAtmPWLosPktEn Integer32, hwAtmPWMisorderPktEn Integer32, hwAtmPWUnknownCellEn Integer32, hwAtmAllEn Integer32 } hwSNMPTrapEnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 1 } hwCesPWLopsEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 2 } hwCesPWRemoteLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 3 } hwCesPWOppositeRAIEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 4 } hwCesPWOppositeAcfaultEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 5 } hwCesPWLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 6 } hwCesPWMisorderPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 7 } hwCesPWStrayPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 8 } hwCesPWMalPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 9 } hwCesPWJtrUnrEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 10 } hwCesPWJtrOvrEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 11 } hwCesPWAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 12 } hwPhysicalPortLosAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 13 } hwPhysicalPortLofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 14 } hwRsOofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 15 } hwRsB1ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 16 } hwRsB1SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 17 } hwRsJ0TimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 18 } hwMsRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 19 } hwMsB2ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 20 } hwMsAuLopAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 21 } hwMsAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 22 } hwMsB2SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 23 } hwHpJ1TimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 24 } hwHpUneqAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 25 } hwHpRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 26 } hwHpB3ExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 27 } hwHpPlmAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 28 } hwHpB3SdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 29 } hwHpAuAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 30 } hwLpTuLopAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 31 } hwHpTuLomAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 32 } hwLpTimAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 33 } hwLpUneqAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 34 } hwLpRdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 35 } hwLpBipExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 36 } hwLpBipSdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 37 } hwLpPlmAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 38 } hwLpTuAisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 39 } hwDs1EsExcAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 40 } hwDs1RmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 41 } hwDs1LmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 42 } hwDs1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 43 } hwDs1RdiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 44 } hwRsLocAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 45 } hwLpRfiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 46 } hwLpV5VcaisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 47 } hwVc12oofAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 48 } hwVc12AlmE1RaiAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 49 } hwVc12LfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 50 } hwVc12UpE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 51 } hwVc12DownE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 52 } hwDs1DownE1AisAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 53 } hwMsLpsUniBiMAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 54 } hwMsK1K2MAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 55 } hwMsK2MAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 56 } hwVc12LmfaAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 57 } hwSDHAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 58 } hwLaserShutAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 59 } hwLaserAutoShutAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 60 } hwLaserAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 61 } hwLoopbackAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 62 } hwChannelLoopbackAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 63 } hwLoopbackAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 64 } hwAtmOcdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 65 } hwAtmLcdAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 66 } hwAtmUhcsAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 67 } hwAtmChcsAlarmEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 68 } hwAtmPWLosPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 69 } hwAtmPWMisorderPktEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 70 } hwAtmPWUnknownCellEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 71 } hwAtmAllEn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved nodes do not support this function temporarily." ::= { hwSNMPTrapEnEntry 72 } hwPortAlarmThreshold OBJECT IDENTIFIER ::= { hwPortMIBObjects 14 } hwPortAlarmThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port alarm threshold. This table lists the port alarm threshold of various interfaces." ::= { hwPortAlarmThreshold 1 } hwPortAlarmThresholdEntry OBJECT-TYPE SYNTAX HwPortAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port alarm threshold. This table lists the threshold of various port alarm." INDEX { hwPhysicalPortThrIfIndex } ::= { hwPortAlarmThresholdTable 1 } HwPortAlarmThresholdEntry ::= SEQUENCE { hwPhysicalPortThrIfIndex InterfaceIndex, hwPhysicalPortThrName OCTET STRING, hwPhysicalPortCrcErrorStatistics Counter64, hwPhysicalPortCrcErrorHighThreshold Unsigned32, hwPhysicalPortCrcErrorLowThreshold Unsigned32, hwPhysicalPortCrcErrorInterval Unsigned32, hwPhysicalPortSymbolErrorStatistics Counter64, hwPhysicalPortSymbolErrorHighThreshold Unsigned32, hwPhysicalPortSymbolErrorLowThreshold Unsigned32, hwPhysicalPortSymbolErrorInterval Unsigned32, hwPhysicalPortInputErrorStatistics Counter64, hwPhysicalPortInputErrorHighThreshold Unsigned32, hwPhysicalPortInputErrorLowThreshold Unsigned32, hwPhysicalPortInputErrorInterval Unsigned32, hwPhysicalPortOutputErrorStatistics Counter64, hwPhysicalPortOutputErrorHighThreshold Unsigned32, hwPhysicalPortOutputErrorLowThreshold Unsigned32, hwPhysicalPortOutputErrorInterval Unsigned32, hwPhysicalPortSdhErrorStatistics Counter64, hwPhysicalPortSdhErrorHighThreshold Unsigned32, hwPhysicalPortSdhErrorLowThreshold Unsigned32, hwPhysicalPortSdhErrorInterval Unsigned32, hwPhysicalPortBIP8SDErrorThreshold Unsigned32, hwPhysicalPortCrcPerAlarmThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerAlarmThresholdPower Unsigned32, hwPhysicalPortCrcPerResumeThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerResumeThresholdPower Unsigned32, hwPhysicalPortCrcPerTriggerLsp Unsigned32, hwPhysicalPortCrcPerCurrentValueString OCTET STRING, hwPhysicalPortCrcPerAlarmThresholdString OCTET STRING, hwPhysicalPortCrcPerResumeThresholdString OCTET STRING, hwPhysicalPortCrcPerTriggerSection Unsigned32, hwPhysicalPortAlarmTypeThresholdCoefficient INTEGER, hwPhysicalPortCrcSdAlarmThresholdCoefficient Unsigned32, hwPhysicalPortCrcSdAlarmThresholdPower Unsigned32, hwPhysicalPortCrcSdResumeThresholdCoefficient Unsigned32, hwPhysicalPortCrcSdResumeThresholdPower Unsigned32, hwPhysicalPortCrcExcAlarmThresholdCoefficient Unsigned32, hwPhysicalPortCrcExcAlarmThresholdPower Unsigned32, hwPhysicalPortCrcExcResumeThresholdCoefficient Unsigned32, hwPhysicalPortCrcExcResumeThresholdPower Unsigned32, hwPhysicalPortCrcSdAlarmThresholdString OCTET STRING, hwPhysicalPortCrcSdResumeThresholdString OCTET STRING, hwPhysicalPortCrcExcAlarmThresholdString OCTET STRING, hwPhysicalPortCrcExcResumeThresholdString OCTET STRING, hwPhysicalPortCrcPerAlarmCoefficientStatistics Unsigned32, hwPhysicalPortCrcPerAlarmPowerStatistics Unsigned32, hwPhysicalPortCrcSdAlarmTriggerLsp INTEGER, hwPhysicalPortCrcExcAlarmTriggerLsp INTEGER, hwPhysicalPortCrcPerWarningThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerWarningThresholdPower Unsigned32, hwPhysicalPortCrcPerWarningResumeThresholdCoefficient Unsigned32, hwPhysicalPortCrcPerWarningResumeThresholdPower Unsigned32, hwPhysicalPortCrcPerWarningThresholdString OCTET STRING, hwPhysicalPortCrcPerWarningResumeThresholdString OCTET STRING, hwPhysicalPortPreFecCoefficientStatistics Unsigned32, hwPhysicalPortPreFecPowerStatistics Unsigned32, hwPhysicalPortErrorPerCurrentValueString OCTET STRING, hwPhysicalPortErrorPerAlarmThresholdString OCTET STRING, hwInputBroadcastChangeThreshold Unsigned32, hwCurrentStatisticalInputBroadcast Counter64, hwBaseStatisticalInputBroadcast Counter64 } hwPhysicalPortThrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device." ::= { hwPortAlarmThresholdEntry 1 } hwPhysicalPortThrName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of physical port(s) present on the device." ::= { hwPortAlarmThresholdEntry 2 } hwPhysicalPortCrcErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Crc error statistics value." ::= { hwPortAlarmThresholdEntry 3 } hwPhysicalPortCrcErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm high threshold,default value is 1000." ::= { hwPortAlarmThresholdEntry 4 } hwPhysicalPortCrcErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm low threshold,default value is 100." ::= { hwPortAlarmThresholdEntry 5 } hwPhysicalPortCrcErrorInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Crc error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 6 } hwPhysicalPortSymbolErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Symbol error statistics value." ::= { hwPortAlarmThresholdEntry 7 } hwPhysicalPortSymbolErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm high threshold,default value is 1000." ::= { hwPortAlarmThresholdEntry 8 } hwPhysicalPortSymbolErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm low threshold,default value is 100." ::= { hwPortAlarmThresholdEntry 9 } hwPhysicalPortSymbolErrorInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbol error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 10 } hwPhysicalPortInputErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Input error statistics value." ::= { hwPortAlarmThresholdEntry 11 } hwPhysicalPortInputErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm high threshold,default value is 1000." ::= { hwPortAlarmThresholdEntry 12 } hwPhysicalPortInputErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm low threshold,default value is 100." ::= { hwPortAlarmThresholdEntry 13 } hwPhysicalPortInputErrorInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Input error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 14 } hwPhysicalPortOutputErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Output error statistics value." ::= { hwPortAlarmThresholdEntry 15 } hwPhysicalPortOutputErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm high threshold,default value is 1000." ::= { hwPortAlarmThresholdEntry 16 } hwPhysicalPortOutputErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm low threshold,default value is 100." ::= { hwPortAlarmThresholdEntry 17 } hwPhysicalPortOutputErrorInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Output error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 18 } hwPhysicalPortSdhErrorStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sdh error statistics value." ::= { hwPortAlarmThresholdEntry 19 } hwPhysicalPortSdhErrorHighThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm high threshold,default value is 1000." ::= { hwPortAlarmThresholdEntry 20 } hwPhysicalPortSdhErrorLowThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm low threshold,default value is 100." ::= { hwPortAlarmThresholdEntry 21 } hwPhysicalPortSdhErrorInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Sdh error alarm interval time(unit is second),default value is 10s." ::= { hwPortAlarmThresholdEntry 22 } hwPhysicalPortBIP8SDErrorThreshold OBJECT-TYPE SYNTAX Unsigned32 (6..9) MAX-ACCESS read-write STATUS current DESCRIPTION "BIP8-SD error alarm threshold,default value is 6." ::= { hwPortAlarmThresholdEntry 23 } hwPhysicalPortCrcPerAlarmThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 24 } hwPhysicalPortCrcPerAlarmThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 7." ::= { hwPortAlarmThresholdEntry 25 } hwPhysicalPortCrcPerResumeThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 26 } hwPhysicalPortCrcPerResumeThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 7." ::= { hwPortAlarmThresholdEntry 27 } hwPhysicalPortCrcPerTriggerLsp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the CRC-PER(Packet Error Ratio) result in switchover. The range is 0 to 2. The value 0 means switchover is disabled; 1 means only the lsp switchover is enabled; 2 means only the section switchover is enabled. " ::= { hwPortAlarmThresholdEntry 28 } hwPhysicalPortCrcPerCurrentValueString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current value of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 29 } hwPhysicalPortCrcPerAlarmThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The alarm threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 30 } hwPhysicalPortCrcPerResumeThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The resume threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 31 } hwPhysicalPortCrcPerTriggerSection OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The trigger section of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 32 } hwPhysicalPortAlarmTypeThresholdCoefficient OBJECT-TYPE SYNTAX INTEGER {packeterror(0),packeterrorratio(1),biterrorratio(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The value 0 means high-low packet error is enabled; 1 means CRC-PER(Packet Error Ratio) is enabled; 2 means CRC-BER(Bit Error Ratio) is enabled." ::= { hwPortAlarmThresholdEntry 33 } hwPhysicalPortCrcSdAlarmThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 34 } hwPhysicalPortCrcSdAlarmThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of MAC_FCS_SD alarm threshold. The range is 5 to 9." ::= { hwPortAlarmThresholdEntry 35 } hwPhysicalPortCrcSdResumeThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 36 } hwPhysicalPortCrcSdResumeThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of MAC_FCS_SD resume threshold. The range is 5 to 9." ::= { hwPortAlarmThresholdEntry 37 } hwPhysicalPortCrcExcAlarmThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 38 } hwPhysicalPortCrcExcAlarmThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5." ::= { hwPortAlarmThresholdEntry 39 } hwPhysicalPortCrcExcResumeThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 40 } hwPhysicalPortCrcExcResumeThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of MAC_FCS_EXC resume threshold. The range is 2 to 5." ::= { hwPortAlarmThresholdEntry 41 } hwPhysicalPortCrcSdAlarmThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The alarm threshold of MAC_FCS_SD." ::= { hwPortAlarmThresholdEntry 42 } hwPhysicalPortCrcSdResumeThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The resume threshold of MAC_FCS_SD." ::= { hwPortAlarmThresholdEntry 43 } hwPhysicalPortCrcExcAlarmThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The alarm threshold of MAC_FCS_EXC." ::= { hwPortAlarmThresholdEntry 44 } hwPhysicalPortCrcExcResumeThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The resume threshold of MAC_FCS_EXC." ::= { hwPortAlarmThresholdEntry 45 } hwPhysicalPortCrcPerAlarmCoefficientStatistics OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) alarm statistics." ::= { hwPortAlarmThresholdEntry 46 } hwPhysicalPortCrcPerAlarmPowerStatistics OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) alarm statistics." ::= { hwPortAlarmThresholdEntry 47 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48 hwPhysicalPortCrcSdAlarmTriggerLsp OBJECT-TYPE SYNTAX INTEGER { notsupport(-1), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the SD alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled. " ::= { hwPortAlarmThresholdEntry 48 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49 hwPhysicalPortCrcExcAlarmTriggerLsp OBJECT-TYPE SYNTAX INTEGER { notsupport(-1), enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the EXC alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled." ::= { hwPortAlarmThresholdEntry 49 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50 hwPhysicalPortCrcPerWarningThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 50 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51 hwPhysicalPortCrcPerWarningThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7." ::= { hwPortAlarmThresholdEntry 51 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52 hwPhysicalPortCrcPerWarningResumeThresholdCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9." ::= { hwPortAlarmThresholdEntry 52 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53 hwPhysicalPortCrcPerWarningResumeThresholdPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7." ::= { hwPortAlarmThresholdEntry 53 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54 hwPhysicalPortCrcPerWarningThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The warning threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 54 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55 hwPhysicalPortCrcPerWarningResumeThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The warning resume threshold of CRC-PER(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 55 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56 hwPhysicalPortPreFecCoefficientStatistics OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of PRE-FEC bit-error-ratio statistics." ::= { hwPortAlarmThresholdEntry 56 } -- 1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57 hwPhysicalPortPreFecPowerStatistics OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of PRE-FEC bit-error-ratio statistics." ::= { hwPortAlarmThresholdEntry 57 } hwPhysicalPortErrorPerCurrentValueString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current value of error packets per second(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 58 } hwPhysicalPortErrorPerAlarmThresholdString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The warning threshold of error packets per second(Packet Error Ratio)." ::= { hwPortAlarmThresholdEntry 59 } hwInputBroadcastChangeThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "input broadcast rate Threshold." ::= { hwPortAlarmThresholdEntry 60 } hwCurrentStatisticalInputBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "current statistics of input broadcast." ::= { hwPortAlarmThresholdEntry 61 } hwBaseStatisticalInputBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "base statistics of input broadcast." ::= { hwPortAlarmThresholdEntry 62 } -- 1.3.6.1.4.1.2011.5.25.157.1.15 hwPortAlarmDownEnable OBJECT IDENTIFIER ::= { hwPortMIBObjects 15 } hwPortAlarmDownEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortAlarmDownEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm." ::= { hwPortAlarmDownEnable 1 } hwPortAlarmDownEnableEntry OBJECT-TYPE SYNTAX HwPortAlarmDownEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Enalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm." INDEX { hwPhysicalPortDownIfIndex } ::= { hwPortAlarmDownEnableTable 1 } HwPortAlarmDownEnableEntry ::= SEQUENCE { hwPhysicalPortDownIfIndex InterfaceIndex, hwPhysicalPortDownName OCTET STRING, hwPhysicalPortCrcEnabledDown INTEGER, hwPhysicalPortSymbolEnabledDown INTEGER, hwPhysicalPortInputEnabledDown INTEGER, hwPhysicalPortOutputEnabledDown INTEGER, hwPhysicalPortSdhEnabledDown INTEGER, hwPhysicalPortBip8SdEnabledDown INTEGER } hwPhysicalPortDownIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of physical port(s) present on the device." ::= { hwPortAlarmDownEnableEntry 1 } hwPhysicalPortDownName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of physical port(s) present on the device." ::= { hwPortAlarmDownEnableEntry 2 } hwPhysicalPortCrcEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the crc error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 3 } hwPhysicalPortSymbolEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the symbol error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 4 } hwPhysicalPortInputEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the input error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 5 } hwPhysicalPortOutputEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the output error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 6 } hwPhysicalPortSdhEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the sdh error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 7 } hwPhysicalPortBip8SdEnabledDown OBJECT-TYPE SYNTAX INTEGER {disable(0),enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable." ::= { hwPortAlarmDownEnableEntry 8 } hwPortProtectGroupCfg OBJECT IDENTIFIER ::= { hwPortMIBObjects 16 } hwPortProtectGroupCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortProtectGroupCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of the port protect group configuration information, and include the port group, working status of port etc." ::= { hwPortProtectGroupCfg 1 } hwPortProtectGroupCfgEntry OBJECT-TYPE SYNTAX HwPortProtectGroupCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of the port protect group configuration information. The index of the table is hwPortProtectGroupId." INDEX { hwPortProtectGroupId } ::= { hwPortProtectGroupCfgTable 1 } HwPortProtectGroupCfgEntry ::= SEQUENCE { hwPortProtectGroupId Integer32, hwPortProtectMasterIfIndex Integer32, hwPortProtectMasterStatus INTEGER, hwPortProtectSlaveIfIndex Integer32, hwPortProtectSlaveStatus INTEGER, hwPortProtectRowStatus RowStatus } hwPortProtectGroupId OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Port protect group index." ::= { hwPortProtectGroupCfgEntry 1 } hwPortProtectMasterIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The master interface index of port protect group." ::= { hwPortProtectGroupCfgEntry 2 } hwPortProtectMasterStatus OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Working status of master port , include work, protect, down. work: the port in group is active. protect: master port is protect port. down: master port is inactive." ::= { hwPortProtectGroupCfgEntry 3 } hwPortProtectSlaveIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The slave interface index of port protect group." ::= { hwPortProtectGroupCfgEntry 4 } hwPortProtectSlaveStatus OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Working status of slave port , include work, protect, down. work: the port in group is active. protect: slave port is protect port. down: slave port is inactive." ::= { hwPortProtectGroupCfgEntry 5 } hwPortProtectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of port protect group row." ::= { hwPortProtectGroupCfgEntry 6 } hwPortLine OBJECT IDENTIFIER ::= { hwPortMIBObjects 17 } hwPortLineTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the link attributes of the interface. This table lists the link attributes of the interface." ::= { hwPortLine 1 } hwPortLineEntry OBJECT-TYPE SYNTAX HwPortLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the link attributes of the interface. This table lists the link attributes of the interface." INDEX { hwPortLineIfIndex } ::= { hwPortLineTable 1 } HwPortLineEntry ::= SEQUENCE { hwPortLineIfIndex InterfaceIndex, hwPortLineUpStreampbo Integer32, hwPortLineDownStreampbo Integer32, hwPortLineUpStreamLoopAtten Integer32, hwPortLineDownStreamLoopAtten Integer32, hwPortLineUpStreamSnrMargin Integer32, hwPortLineDownStreamSnrMargin Integer32, hwPortLineSpeed Integer32 } hwPortLineIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwPortLineEntry 1 } hwPortLineUpStreampbo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the upstream power back-off of the interface." ::= { hwPortLineEntry 2 } hwPortLineDownStreampbo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the downstream power back-off of the interface." ::= { hwPortLineEntry 3 } hwPortLineUpStreamLoopAtten OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the upstream loopback attenuation of the interface." ::= { hwPortLineEntry 4 } hwPortLineDownStreamLoopAtten OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the downstream loopback attenuation of the interface." ::= { hwPortLineEntry 5 } hwPortLineUpStreamSnrMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the upstream SNR margin of the interface." ::= { hwPortLineEntry 6 } hwPortLineDownStreamSnrMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the downstream SNR margin of the interface." ::= { hwPortLineEntry 7 } hwPortLineSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the negotiated rate of the interface." ::= { hwPortLineEntry 8 } hwPortIfStatistics OBJECT IDENTIFIER ::= { hwPortMIBObjects 18 } hwPortIfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the number of packets of the interface." ::= { hwPortIfStatistics 1 } hwPortIfStatEntry OBJECT-TYPE SYNTAX HwPortIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the number of packets of the interface." INDEX { hwPortIfStatIfIndex } ::= { hwPortIfStatTable 1 } HwPortIfStatEntry ::= SEQUENCE { hwPortIfStatIfIndex InterfaceIndex, hwPortIfStatIfInCrcPkts Integer32 } hwPortIfStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwPortIfStatEntry 1 } hwPortIfStatIfInCrcPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets which the CRC operates." ::= { hwPortIfStatEntry 2 } hwIPIfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIPIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the number of ip packets of the interface." ::= { hwPortIfStatistics 2 } hwIPIfStatEntry OBJECT-TYPE SYNTAX HwIPIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the number of ip packets of the interface." INDEX { hwIpIfStatsIfIndex,hwIpIfStatsIPVersion } ::= { hwIPIfStatTable 1 } HwIPIfStatEntry ::= SEQUENCE { hwIpIfStatsIPVersion INTEGER, hwIpIfStatsIfIndex Integer32, hwIpIfInOctetRate Counter64, hwIpIfInPktRate Counter64, hwIpIfOutOctetRate Counter64, hwIpIfOutPktRate Counter64, hwIpIfInOctets Counter64, hwIpIfInPkts Counter64, hwIpIfOutOctets Counter64, hwIpIfOutPkts Counter64 } hwIpIfStatsIPVersion OBJECT-TYPE SYNTAX INTEGER {ipv4(1),ipv6(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The version of packets protocol." ::= { hwIPIfStatEntry 1 } hwIpIfStatsIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device ." ::= { hwIPIfStatEntry 2 } hwIpIfInOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip rate of octets received on the interface ." ::= { hwIPIfStatEntry 3 } hwIpIfInPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip rate of packets received on the interface ." ::= { hwIPIfStatEntry 4 } hwIpIfOutOctetRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip rate of octets transmitted out of the interface ." ::= { hwIPIfStatEntry 5 } hwIpIfOutPktRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip rate of packets transmitted out of the interface ." ::= { hwIPIfStatEntry 6 } hwIpIfInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip octets received on the interface ." ::= { hwIPIfStatEntry 7 } hwIpIfInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip packets received on the interface ." ::= { hwIPIfStatEntry 8 } hwIpIfOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip octets transmitted out of the interface ." ::= { hwIPIfStatEntry 9 } hwIpIfOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The ip packets transmitted out of the interface ." ::= { hwIPIfStatEntry 10 } hwPortDescription OBJECT IDENTIFIER ::= { hwPortMIBObjects 19 } hwPortDescriptionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the description of interfaces." ::= { hwPortDescription 1 } hwPortDescriptionEntry OBJECT-TYPE SYNTAX HwPortDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the description of interfaces." INDEX { hwPortDescriptionIfIndex } ::= { hwPortDescriptionTable 1 } HwPortDescriptionEntry ::= SEQUENCE { hwPortDescriptionIfIndex Integer32, hwPortDescriptionIfPortDescription INTEGER } hwPortDescriptionIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwPortDescriptionEntry 1 } hwPortDescriptionIfPortDescription OBJECT-TYPE SYNTAX INTEGER { router(1), switch(2), phone(3), desktop(4), null(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the description of ports." ::= { hwPortDescriptionEntry 2 } hwPRBSTestInfo OBJECT IDENTIFIER ::= { hwPortMIBObjects 20 } hwPRBSTestPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPRBSTestPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the capability and result of PRBS test." ::= { hwPRBSTestInfo 1 } hwPRBSTestPortStatusEntry OBJECT-TYPE SYNTAX HwPRBSTestPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the capability and result of PRBS test." INDEX { hwPRBSTestPortStatusIfName, hwPRBSTestPortStatusSide } ::= { hwPRBSTestPortStatusTable 1 } HwPRBSTestPortStatusEntry ::= SEQUENCE { hwPRBSTestPortStatusIfName OCTET STRING, hwPRBSTestPortStatusSide INTEGER, hwPRBSTestPortStatusSuportFlag INTEGER, hwPRBSTestPortStatusPatternBitmap Unsigned32, hwPRBSTestPortStatusErrInsertLevel Unsigned32, hwPRBSTestPortStatusSlotNum Unsigned32, hwPRBSTestPortStatusCardNum Unsigned32, hwPRBSTestPortStatusPhyPortIfName OCTET STRING, hwPRBSTestPortStatusResultCount Unsigned32, hwPRBSTestPortStatusOngoingTestIndex Unsigned32 } hwPRBSTestPortStatusIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of port(s) present on the device." ::= { hwPRBSTestPortStatusEntry 1 } hwPRBSTestPortStatusSide OBJECT-TYPE SYNTAX INTEGER {nni(0),uni(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate PRBS test side." ::= { hwPRBSTestPortStatusEntry 2 } hwPRBSTestPortStatusSuportFlag OBJECT-TYPE SYNTAX INTEGER {notsupportinter(0),unframedandsupport(1),unframedandnotsupport(2),fractionalandsupport(3),fractionalandnotsupport(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "Whether PRBS test supported." ::= { hwPRBSTestPortStatusEntry 3 } hwPRBSTestPortStatusPatternBitmap OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate supported PRBS pattern by bitmap. bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS11, bit 12 : QRW" ::= { hwPRBSTestPortStatusEntry 4 } hwPRBSTestPortStatusErrInsertLevel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the supported err-insert level. It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2, 1e-3, etc. e.g. 0x1FC (0b111111100): Range from 1e-2 to 1e-8 supported. 0xA (0b1010) : Only 1e-1 and 1e-3 supported." ::= { hwPRBSTestPortStatusEntry 5 } hwPRBSTestPortStatusSlotNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Slot ID of the testing phyicial port." ::= { hwPRBSTestPortStatusEntry 6 } hwPRBSTestPortStatusCardNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card ID of the testing phyicial port." ::= { hwPRBSTestPortStatusEntry 7 } hwPRBSTestPortStatusPhyPortIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Name of the testing phyicial port." ::= { hwPRBSTestPortStatusEntry 8 } hwPRBSTestPortStatusResultCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of PRBS test history result." ::= { hwPRBSTestPortStatusEntry 9 } hwPRBSTestPortStatusOngoingTestIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ongoing PRBS testing index of current interface." ::= { hwPRBSTestPortStatusEntry 10 } hwPRBSTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPRBSTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test result info." ::= { hwPRBSTestInfo 2 } hwPRBSTestResultEntry OBJECT-TYPE SYNTAX HwPRBSTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test result info." INDEX { hwPRBSTestResultIfName, hwPRBSTestResultTestIndex } ::= { hwPRBSTestResultTable 1 } HwPRBSTestResultEntry ::= SEQUENCE { hwPRBSTestResultIfName OCTET STRING, hwPRBSTestResultTestIndex Unsigned32, hwPRBSTestResultPhyPortIfName OCTET STRING, hwPRBSTestResultSide INTEGER, hwPRBSTestResultPattern Unsigned32, hwPRBSTestResultIntervalTime Unsigned32, hwPRBSTestResultIntervalCount Unsigned32, hwPRBSTestResultTestingIntervalIndex Unsigned32, hwPRBSTestResultStartTime DateAndTime, hwPRBSTestResultStopTime DateAndTime, hwPRBSTestResultProgress Unsigned32, hwPRBSTestResultRemainTime Unsigned32, hwPRBSTestResultErrInserted INTEGER, hwPRBSTestResultTotalBit Counter64, hwPRBSTestResultErrorBit Counter64, hwPRBSTestResultBerCoe Unsigned32, hwPRBSTestResultBerPow Unsigned32, hwPRBSTestResultLos Unsigned32, hwPRBSTestResultEs Unsigned32, hwPRBSTestResultEfs Unsigned32, hwPRBSTestResultSes Unsigned32, hwPRBSTestResultUas Unsigned32, hwPRBSTestResultSegmentTime Unsigned32, hwPRBSTestResultSegmentTotalCount Unsigned32, hwPRBSTestResultTestingSegmentIndex Unsigned32 } hwPRBSTestResultIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of port(s) present on the device." ::= { hwPRBSTestResultEntry 1 } hwPRBSTestResultTestIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the PRBS test hisotry test index. 0 is invalid." ::= { hwPRBSTestResultEntry 2 } hwPRBSTestResultPhyPortIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Name of the testing phyicial port." ::= { hwPRBSTestResultEntry 3 } hwPRBSTestResultSide OBJECT-TYPE SYNTAX INTEGER {nni(0),uni(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate PRBS test side." ::= { hwPRBSTestResultEntry 4 } hwPRBSTestResultPattern OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here." ::= { hwPRBSTestResultEntry 5 } hwPRBSTestResultIntervalTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Period time of each interval, in second." ::= { hwPRBSTestResultEntry 6 } hwPRBSTestResultIntervalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "PRBS test interval repeat count." ::= { hwPRBSTestResultEntry 7 } hwPRBSTestResultTestingIntervalIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ongoing testing interval index." ::= { hwPRBSTestResultEntry 8 } hwPRBSTestResultStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the test." ::= { hwPRBSTestResultEntry 9 } hwPRBSTestResultStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Stop time of the test." ::= { hwPRBSTestResultEntry 10 } hwPRBSTestResultProgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Prgress of the test. 100 means 100%." ::= { hwPRBSTestResultEntry 11 } hwPRBSTestResultRemainTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time of the test, in second." ::= { hwPRBSTestResultEntry 12 } hwPRBSTestResultErrInserted OBJECT-TYPE SYNTAX INTEGER {yes(0),no(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Whether error-bit inserted of the test" ::= { hwPRBSTestResultEntry 13 } hwPRBSTestResultTotalBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total-bit of the test." ::= { hwPRBSTestResultEntry 14 } hwPRBSTestResultErrorBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Error-bit of the test." ::= { hwPRBSTestResultEntry 15 } hwPRBSTestResultBerCoe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of bit-error-ratio." ::= { hwPRBSTestResultEntry 16 } hwPRBSTestResultBerPow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of bit-error-ratio." ::= { hwPRBSTestResultEntry 17 } hwPRBSTestResultLos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of sync second." ::= { hwPRBSTestResultEntry 18 } hwPRBSTestResultEs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error second." ::= { hwPRBSTestResultEntry 19 } hwPRBSTestResultEfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error free second." ::= { hwPRBSTestResultEntry 20 } hwPRBSTestResultSes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Severely error second, comparing with 1E-3." ::= { hwPRBSTestResultEntry 21 } hwPRBSTestResultUas OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES." ::= { hwPRBSTestResultEntry 22 } hwPRBSTestResultSegmentTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Period time of each segment, in second." ::= { hwPRBSTestResultEntry 23 } hwPRBSTestResultSegmentTotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segment count of the whole PRBS test." ::= { hwPRBSTestResultEntry 24 } hwPRBSTestResultTestingSegmentIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ongoing testing segment index." ::= { hwPRBSTestResultEntry 25 } hwPRBSTestIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPRBSTestIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test interval info." ::= { hwPRBSTestInfo 3 } hwPRBSTestIntervalEntry OBJECT-TYPE SYNTAX HwPRBSTestIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test interval info." INDEX { hwPRBSTestIntervalIfName, hwPRBSTestIntervalTestIndex, hwPRBSTestIntervalIndex } ::= { hwPRBSTestIntervalTable 1 } HwPRBSTestIntervalEntry ::= SEQUENCE { hwPRBSTestIntervalIfName OCTET STRING, hwPRBSTestIntervalTestIndex Unsigned32, hwPRBSTestIntervalIndex Unsigned32, hwPRBSTestIntervalStartTime DateAndTime, hwPRBSTestIntervalStopTime DateAndTime, hwPRBSTestIntervalProgress Unsigned32, hwPRBSTestIntervalRemainTime Unsigned32, hwPRBSTestIntervalErrInserted INTEGER, hwPRBSTestIntervalTotalBit Counter64, hwPRBSTestIntervalErrorBit Counter64, hwPRBSTestIntervalBerCoe Unsigned32, hwPRBSTestIntervalBerPow Unsigned32, hwPRBSTestIntervalLos Unsigned32, hwPRBSTestIntervalEs Unsigned32, hwPRBSTestIntervalEfs Unsigned32, hwPRBSTestIntervalSes Unsigned32, hwPRBSTestIntervalUas Unsigned32 } hwPRBSTestIntervalIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of port(s) present on the device." ::= { hwPRBSTestIntervalEntry 1 } hwPRBSTestIntervalTestIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the PRBS test hisotry test index. 0 is invalid." ::= { hwPRBSTestIntervalEntry 2 } hwPRBSTestIntervalIndex OBJECT-TYPE SYNTAX Unsigned32(0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the interval index of a test. 0 is invalid." ::= { hwPRBSTestIntervalEntry 3 } hwPRBSTestIntervalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the interval." ::= { hwPRBSTestIntervalEntry 4 } hwPRBSTestIntervalStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Stop time of the interval" ::= { hwPRBSTestIntervalEntry 5 } hwPRBSTestIntervalProgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Prgress of the interval. 100 means 100%." ::= { hwPRBSTestIntervalEntry 6 } hwPRBSTestIntervalRemainTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time of the interval, in second." ::= { hwPRBSTestIntervalEntry 7 } hwPRBSTestIntervalErrInserted OBJECT-TYPE SYNTAX INTEGER {yes(0),no(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Whether error-bit inserted of the interval" ::= { hwPRBSTestIntervalEntry 8 } hwPRBSTestIntervalTotalBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total-bit of the interval." ::= { hwPRBSTestIntervalEntry 9 } hwPRBSTestIntervalErrorBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Error-bit of the interval." ::= { hwPRBSTestIntervalEntry 10 } hwPRBSTestIntervalBerCoe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of bit-error-ratio." ::= { hwPRBSTestIntervalEntry 11 } hwPRBSTestIntervalBerPow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of bit-error-ratio." ::= { hwPRBSTestIntervalEntry 12 } hwPRBSTestIntervalLos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of sync second." ::= { hwPRBSTestIntervalEntry 13 } hwPRBSTestIntervalEs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error second." ::= { hwPRBSTestIntervalEntry 14 } hwPRBSTestIntervalEfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error free second." ::= { hwPRBSTestIntervalEntry 15 } hwPRBSTestIntervalSes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Severely error second, comparing with 1E-3." ::= { hwPRBSTestIntervalEntry 16 } hwPRBSTestIntervalUas OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES." ::= { hwPRBSTestIntervalEntry 17 } hwPRBSTestSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPRBSTestSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test segment info." ::= { hwPRBSTestInfo 4 } hwPRBSTestSegmentEntry OBJECT-TYPE SYNTAX HwPRBSTestSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists PRBS test segment info." INDEX { hwPRBSTestSegmentIfName, hwPRBSTestSegmentTestIndex, hwPRBSTestSegmentIndex } ::= { hwPRBSTestSegmentTable 1 } HwPRBSTestSegmentEntry ::= SEQUENCE { hwPRBSTestSegmentIfName OCTET STRING, hwPRBSTestSegmentTestIndex Unsigned32, hwPRBSTestSegmentIndex Unsigned32, hwPRBSTestSegmentStartTime DateAndTime, hwPRBSTestSegmentEndTime DateAndTime, hwPRBSTestSegmentTotalBit Counter64, hwPRBSTestSegmentErrorBit Counter64, hwPRBSTestSegmentBerCoe Unsigned32, hwPRBSTestSegmentBerPow Unsigned32, hwPRBSTestSegmentLos Unsigned32, hwPRBSTestSegmentEs Unsigned32, hwPRBSTestSegmentEfs Unsigned32, hwPRBSTestSegmentSes Unsigned32, hwPRBSTestSegmentUas Unsigned32 } hwPRBSTestSegmentIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface name of port(s) present on the device." ::= { hwPRBSTestSegmentEntry 1 } hwPRBSTestSegmentTestIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the PRBS test index. 0 is invalid." ::= { hwPRBSTestSegmentEntry 2 } hwPRBSTestSegmentIndex OBJECT-TYPE SYNTAX Unsigned32(0..864000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the segment index of a test. 0 is invalid." ::= { hwPRBSTestSegmentEntry 3 } hwPRBSTestSegmentStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the interval." ::= { hwPRBSTestSegmentEntry 4 } hwPRBSTestSegmentEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Stop time of the interval" ::= { hwPRBSTestSegmentEntry 5 } hwPRBSTestSegmentTotalBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total-bit of the segment." ::= { hwPRBSTestSegmentEntry 6 } hwPRBSTestSegmentErrorBit OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Error-bit of the segment." ::= { hwPRBSTestSegmentEntry 7 } hwPRBSTestSegmentBerCoe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of bit-error-ratio." ::= { hwPRBSTestSegmentEntry 8 } hwPRBSTestSegmentBerPow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of bit-error-ratio." ::= { hwPRBSTestSegmentEntry 9 } hwPRBSTestSegmentLos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Loss of sync second." ::= { hwPRBSTestSegmentEntry 10 } hwPRBSTestSegmentEs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error second." ::= { hwPRBSTestSegmentEntry 11 } hwPRBSTestSegmentEfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error free second." ::= { hwPRBSTestSegmentEntry 12 } hwPRBSTestSegmentSes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Severely error second, comparing with 1E-3." ::= { hwPRBSTestSegmentEntry 13 } hwPRBSTestSegmentUas OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES." ::= { hwPRBSTestSegmentEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.21 hwOtn OBJECT IDENTIFIER ::= { hwPortMIBObjects 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1 hwOtnTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the otn attributes of the WDM interface." ::= { hwOtn 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1 hwOtnEntry OBJECT-TYPE SYNTAX HwOtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the otn attributes of the WDM interface." INDEX { hwOtnIfIndex } ::= { hwOtnTable 1 } HwOtnEntry ::= SEQUENCE { hwOtnIfIndex InterfaceIndex, hwOtnFecMode INTEGER, hwOtnFec0bitStatistics Counter64, hwOtnFec1bitStatistics Counter64, hwOtnFec0And1TypeStatistics Counter64, hwOtnFecSymbolErrStatistics Counter64, hwOtnFecUncorrectErrStatistics Counter64, hwOtnPreFecBERCoefficient Unsigned32, hwOtnPreFecBERPower Unsigned32, hwOtnAfterFecBERCoefficient Unsigned32, hwOtnAfterFecBERPower Unsigned32, hwOtnOSNR Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1 hwOtnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index(es) of port(s) present on the device." ::= { hwOtnEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2 hwOtnFecMode OBJECT-TYPE SYNTAX INTEGER {none(0),standard(1),enhanced(2),enhancedI7(3),enhancedI4(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Fec mode of the WDM interface. By default, the Fec mode is standard." ::= { hwOtnEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.3 hwOtnFec0bitStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of FEC 0 bit statistics." ::= { hwOtnEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.4 hwOtnFec1bitStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of FEC 1 bit statistics." ::= { hwOtnEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.5 hwOtnFec0And1TypeStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of FEC 0 and 1 type statistics." ::= { hwOtnEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.6 hwOtnFecSymbolErrStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of FEC symbol error statistics." ::= { hwOtnEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.7 hwOtnFecUncorrectErrStatistics OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of FEC uncorrect error statistics." ::= { hwOtnEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.8 hwOtnPreFecBERCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of Pre-FEC BER." ::= { hwOtnEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.9 hwOtnPreFecBERPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of Pre-FEC BER." ::= { hwOtnEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.10 hwOtnAfterFecBERCoefficient OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The coefficient value of After-FEC BER." ::= { hwOtnEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.11 hwOtnAfterFecBERPower OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power value of After-FEC BER." ::= { hwOtnEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.21.1.1.14 hwOtnOSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of optical signal-to-noise ratio." ::= { hwOtnEntry 14 } hwLogicalPort OBJECT IDENTIFIER ::= { hwPortMIBObjects 22 } hwLogicalPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLogicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the working status of the logical ports." ::= { hwLogicalPort 1 } hwLogicalPortEntry OBJECT-TYPE SYNTAX HwLogicalPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the working status of the logical ports." INDEX { hwLogicalPortIfIndex } ::= { hwLogicalPortTable 1 } HwLogicalPortEntry ::= SEQUENCE { hwLogicalPortIfIndex InterfaceIndex, hwLogicalPortStatisticEnable INTEGER } hwLogicalPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index(es) of the logical port(s) present on the device ." ::= { hwLogicalPortEntry 1 } hwLogicalPortStatisticEnable OBJECT-TYPE SYNTAX INTEGER { neither(1), inbound(2), outbound(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the statistic enable status of the logical port(s) ." ::= { hwLogicalPortEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23 hwNarrowBand OBJECT IDENTIFIER ::= { hwPortMIBObjects 23 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1 hwEmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all E&M interfaces." ::= { hwNarrowBand 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1 hwEmEntry OBJECT-TYPE SYNTAX HwEmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all E&M interfaces." INDEX { hwEmIfIndex } ::= { hwEmTable 1 } HwEmEntry ::= SEQUENCE { hwEmIfIndex InterfaceIndex, hwEmPcmMode INTEGER, hwEmSignalMode INTEGER, hwEmReceiveGain OCTET STRING, hwEmSendGain OCTET STRING, hwEmUserLine INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.1 hwEmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the index of an E&M interface." ::= { hwEmEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.2 hwEmPcmMode OBJECT-TYPE SYNTAX INTEGER { aLaw(1), uLaw(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the PCM mode of an E&M interface. The value can be A-Law or U-Law. The default value is A-Law." ::= { hwEmEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.3 hwEmSignalMode OBJECT-TYPE SYNTAX INTEGER { bell1(1), bell2(2), bell3(3), bell4(4), bell5(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5." ::= { hwEmEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.4 hwEmReceiveGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the receive gain of an E&M interface. The value ranges from -20 to 1.5 with a step of 0.5, in dB. The default value is 0 dB." ::= { hwEmEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.5 hwEmSendGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the transmit gain of an E&M interface. The value ranges from -7 to 13.5 with a step of 0.5, in dB. The default value is 0 dB. " ::= { hwEmEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.1.1.6 hwEmUserLine OBJECT-TYPE SYNTAX INTEGER { twoWire(1), fourWire(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire. " ::= { hwEmEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2 hwFxsoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwFxsoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all FXS/FXO interfaces." ::= { hwNarrowBand 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1 hwFxsoEntry OBJECT-TYPE SYNTAX HwFxsoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all FXS/FXO interfaces." INDEX { hwEmIfIndex } ::= { hwFxsoTable 1 } HwFxsoEntry ::= SEQUENCE { hwFxsoIfIndex InterfaceIndex, hwFxsoPortMode INTEGER, hwFxsoPcmMode INTEGER, hwFxsCurrent INTEGER, hwFxsImpedance Integer32, hwFxsReceiveGain OCTET STRING, hwFxsSendGain OCTET STRING, hwFxsLineLock INTEGER, hwFxsHotLine INTEGER, hwFxoFeedMaxVoltage Integer32, hwFxoFeedMinVoltage Integer32, hwFxoFeedMaxCurrent INTEGER, hwFxoFeedMinCurrent INTEGER, hwFxoReceiveGain OCTET STRING, hwFxoSendGain OCTET STRING, hwFxoDcImpedance INTEGER, hwFxoAcImpedance Integer32, hwFxoRingMinDuration INTEGER, hwFxoRingMaxInterval INTEGER, hwFxoRingFrequence INTEGER, hwFxoRingAcAmplitude INTEGER, hwFxoRingOffset Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.1 hwFxsoIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the index of an FXS/FXO." ::= { hwFxsoEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.2 hwFxsoPortMode OBJECT-TYPE SYNTAX INTEGER { fxs(7), fxo(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of an FXS/FXO interface. For AND1MPAA PICs, the last four ports (ports 6, 7, 8, and 9) can work either in fxo or fxs mode. The default mode is fxo. " ::= { hwFxsoEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.3 hwFxsoPcmMode OBJECT-TYPE SYNTAX INTEGER { aLaw(1), uLaw(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the PCM mode of an FXS/FXO interface. The value can be A-Law or U-Law. The default value is A-Law." ::= { hwFxsoEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.4 hwFxsCurrent OBJECT-TYPE SYNTAX INTEGER { mA16(1), mA20(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the current of an FXS interface. The value can be 16mA or 20mA. The default value is 16mA. " ::= { hwFxsoEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.5 hwFxsImpedance OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the impedance of an FXS interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm." ::= { hwFxsoEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.6 hwFxsReceiveGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the receive gain of an FXS interface. The value ranges from -12 to 0 with a step of 0.5, in dB. The default value is -7 dB. " ::= { hwFxsoEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.7 hwFxsSendGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the transmit gain of an FXS interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. " ::= { hwFxsoEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.8 hwFxsLineLock OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether line lock is enabled for an FXS interface. The value can be enable or disable. The default value is enable." ::= { hwFxsoEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.9 hwFxsHotLine OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object indicates whether the hotline function is enabled for an FXS interface. The value can be enable or disable. The default value is enable." ::= { hwFxsoEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.10 hwFxoFeedMaxVoltage OBJECT-TYPE SYNTAX Integer32 (-100..0) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -20V." ::= { hwFxsoEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.11 hwFxoFeedMinVoltage OBJECT-TYPE SYNTAX Integer32 (-100..0) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum feed voltage allowed by an FXO interface. The value ranges from -100 to 0. The default value is -80V." ::= { hwFxsoEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.12 hwFxoFeedMaxCurrent OBJECT-TYPE SYNTAX INTEGER { mA25(1), mA30(2), mA35(3), mA40(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum feed current allowed by an FXO interface. The value can be 25mA,30mA,35mA or 40mA. The default value is 35mA." ::= { hwFxsoEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.13 hwFxoFeedMinCurrent OBJECT-TYPE SYNTAX INTEGER { mA16(1), mA17(2), mA18(3), mA19(4), mA20(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum feed current allowed by an FXO interface. The value can be 16mA,17mA,18mA,19mA or 20mA. The default value is 16mA." ::= { hwFxsoEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.14 hwFxoReceiveGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the receive gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB." ::= { hwFxsoEntry 14 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.15 hwFxoSendGain OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the transmit gain of an FXO interface. The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB." ::= { hwFxsoEntry 15 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.16 hwFxoDcImpedance OBJECT-TYPE SYNTAX INTEGER { ohm50(1), ohm800(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the DC impedance of an FXO interface. The value can be 50 ohm or 800 ohm. The default value is 50 ohm. " ::= { hwFxsoEntry 16 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.17 hwFxoAcImpedance OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the AC impedance of an FXO interface.The value can be: value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 nF) and 220 ohm + (820 ohm || 115 nF) value 4: 370 ohm + (620 ohm || 310 nF) value 5: 320 ohm + (1050 ohm || 230 nF) value 6: 370 ohm + (820 ohm || 110 nF) value 7: 275 ohm + (780 ohm || 115 nF) value 8: 20 ohm + (820 ohm || 110 nF) value 9: 350 ohm + (1000 ohm || 210 nF) value 10:200 ohm + (680 ohm || 100 nF) value 11:600 ohm + 2.16 uF value 12:900 ohm + 1 uF value 13:900 ohm + 2.16 uF value 14:600 ohm + 1 uF value 15: Global impedance The default value is 600 ohm." ::= { hwFxsoEntry 17 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.18 hwFxoRingMinDuration OBJECT-TYPE SYNTAX INTEGER { ms100(1), ms150(2), ms200(3), ms256(4), ms384(5), ms512(6), ms640(7), ms1024(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum duration that an FXO interface takes to confirm a ringing current. The value can be 100ms,150ms,200ms,256ms,384ms,512ms,640ms or 1024ms. The default value is 200ms." ::= { hwFxsoEntry 18 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.19 hwFxoRingMaxInterval OBJECT-TYPE SYNTAX INTEGER { notuse(1), ms128(2), ms256(3), ms284(4), ms512(5), ms640(6), ms768(7), ms896(8), ms1024(9), ms1152(10), ms1280(11), ms1408(12), ms1536(13), ms1664(14), ms1792(15), ms1920(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a ringing current timeout period on a FXO interface. The default value is notuse. " ::= { hwFxsoEntry 19 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.20 hwFxoRingFrequence OBJECT-TYPE SYNTAX INTEGER { hz16(1), hz25(2), hz50(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a ringing current's frequency detected by an FXO interface. The value can be 16hz,25hz or 50hz. The default value is 25hz." ::= { hwFxsoEntry 20 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.21 hwFxoRingAcAmplitude OBJECT-TYPE SYNTAX INTEGER { v74(1), v65(2), v50(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a ringing current's AC amplitude detected by an FXO interface. The value can be 74V,65V or 50V. The default value is 50V. " ::= { hwFxsoEntry 21 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.2.1.22 hwFxoRingOffset OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a ringing current's AC offset detected by an FXO interface. The value ranges from 0 to 100. The default value is 70mA." ::= { hwFxsoEntry 22 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3 hwRsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all RS interfaces." ::= { hwNarrowBand 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1 hwRsEntry OBJECT-TYPE SYNTAX HwRsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the attributes of all RS interfaces." INDEX { hwEmIfIndex } ::= { hwRsTable 1 } HwRsEntry ::= SEQUENCE { hwRsIfIndex InterfaceIndex, hwRsPortMode INTEGER, hwRsWorkMode INTEGER, hwRsPhysicalMode INTEGER, hwRsClockSource INTEGER, hwRsBaudrate Integer32, hwRsClockSendMode INTEGER, hwRsClockReceiveMode INTEGER, hwRsParity INTEGER, hwRsStopbits INTEGER, hwRsDatabits Integer32, hwRsMuxProtocol INTEGER, hwRsX50PhaseMode INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1 hwRsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the index of a serial interface on a device. " ::= { hwRsEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2 hwRsPortMode OBJECT-TYPE SYNTAX INTEGER { rs232(1), rs485(2), rs422(3), v24(4), x21(5), v35(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of a serial interface. The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For AND1MPAA PICs: Ports 0 and 2 work in rs-232 mode. The working mode cannot be configured. Ports 1 and 3 can work either in rs-485 or rs-422 mode. The default mode is rs-422. For AND1SA8 PICs, all ports can work in v-35, x-21, or v-24 mode. The default mode is v-24. " ::= { hwRsEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3 hwRsWorkMode OBJECT-TYPE SYNTAX INTEGER { dce(1), dte(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode in which a serial interface works. The value can be dce or dte. The default value is dce." ::= { hwRsEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4 hwRsPhysicalMode OBJECT-TYPE SYNTAX INTEGER { async(1), sync(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode in which a serial interface transmits signals. The value can be async or sync. The default value is async." ::= { hwRsEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5 hwRsClockSource OBJECT-TYPE SYNTAX INTEGER { internal(1), external(2), slave(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the clock source mode of a serial interface. The value can be internal,external or slave. The default value is internal." ::= { hwRsEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6 hwRsBaudrate OBJECT-TYPE SYNTAX Integer32 (0..38) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the baud rate of a serial interface. The value can be : 0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, 4: 9600bit/s, 5: 19200bit/s, 6: 38400bit/s, 7: 48000bit/s, 8~38: N*64Kbit/s N<=31. The default value is 9600 bit/s in asynchronous transmission mode and 64 kbit/s in synchronous transmission mode." ::= { hwRsEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7 hwRsClockSendMode OBJECT-TYPE SYNTAX INTEGER { inphase(1), inversephase(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode in which clock signals transmitted by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inversephase." ::= { hwRsEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8 hwRsClockReceiveMode OBJECT-TYPE SYNTAX INTEGER { inphase(1), inversephase(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode in which clock signals received by a serial interface are sampled. This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is inphase." ::= { hwRsEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9 hwRsParity OBJECT-TYPE SYNTAX INTEGER { none(1), even(2), odd(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the parity check mode of a serial interface's asynchronous frames. This mode can be configured in asynchronous clock mode. The value can be none,even or odd. The default value is none." ::= { hwRsEntry 9 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10 hwRsStopbits OBJECT-TYPE SYNTAX INTEGER { bits1(1), bits2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the number of stop bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value can be 1-bits or 2-bits. The default value is 1-bits." ::= { hwRsEntry 10 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11 hwRsDatabits OBJECT-TYPE SYNTAX Integer32 (5..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the number of data bits contained in a serial interface's asynchronous frame. This object can be configured in asynchronous clock mode. The value ranges from 5 to 8 bits.The default value is 8 bits." ::= { hwRsEntry 11 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12 hwRsMuxProtocol OBJECT-TYPE SYNTAX INTEGER { sbitloop(1), sbit0(2), sbit1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of a serial interface's sub-rate multiplexing protocol. This object can be configured in asynchronous clock mode. The value can be sbit-loop,sbit=0 or sbit=1. The default value is sbit-loop." ::= { hwRsEntry 12 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13 hwRsX50PhaseMode OBJECT-TYPE SYNTAX INTEGER { sequence(1), interval(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate. The value can be sequence or interval. The default value is sequence. " ::= { hwRsEntry 13 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.4 hwGlobalCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the global physical attributes of all narrowband interfaces." ::= { hwNarrowBand 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.4.1 hwGlobalCfgEntry OBJECT-TYPE SYNTAX HwGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the global physical attributes of all narrowband interfaces." INDEX { hwEmIfIndex } ::= { hwGlobalCfgTable 1 } HwGlobalCfgEntry ::= SEQUENCE { hwNarrowBandCardId Integer32, hwSignalMode INTEGER, hwUserLine INTEGER } -- 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.1 hwNarrowBandCardId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the ID of a narrowband card on a device." ::= { hwGlobalCfgEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.2 hwSignalMode OBJECT-TYPE SYNTAX INTEGER { bell1(1), bell2(2), bell3(3), bell4(4), bell5(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the global signal mode of the physical serial interface. By default, the signal mode is bell5. This object indicates the global signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5." ::= { hwGlobalCfgEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.4.1.3 hwUserLine OBJECT-TYPE SYNTAX INTEGER { twoWire(1), fourWire(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the global user line mode of an E&M interface. The value can be 2-wire or 4-wire. The default value is 4-wire." ::= { hwGlobalCfgEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5 hwNbCommonTable OBJECT-TYPE SYNTAX SEQUENCE OF HwNbCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the common attributes of all narrowband interfaces." ::= { hwNarrowBand 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1 hwNbCommonEntry OBJECT-TYPE SYNTAX HwNbCommonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the common attributes of all narrowband interfaces." INDEX { hwEmIfIndex } ::= { hwNbCommonTable 1 } HwNbCommonEntry ::= SEQUENCE { hwNbIfIndex InterfaceIndex, hwNbLoopback INTEGER, hwNbPortType INTEGER, hwNbAcBlock INTEGER, hwNbTimeDelayMaster Integer32, hwNbTimeDelaySlave Integer32, hwNbRealTimeDelay Integer32 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.1 hwNbIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object identifies the index of an narrowband interface." ::= { hwNbCommonEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.2 hwNbLoopback OBJECT-TYPE SYNTAX INTEGER { stopLoopback(1), local(2), remote(3), otherLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The local loopback of an narrowband interface is used to test the interface itself. By default, stopLoopback is used." ::= { hwNbCommonEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.3 hwNbPortType OBJECT-TYPE SYNTAX INTEGER { rs232(1), rs485(2), rs422(3), v24(4), x21(5), v35(6), fxs(7), fxo(8), em(9), c3794(10), c64k(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of a serial interface." ::= { hwNbCommonEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.4 hwNbAcBlock OBJECT-TYPE SYNTAX INTEGER { block(1), active(2), unsupport(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the AC state of a serial interface." ::= { hwNbCommonEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.5 hwNbTimeDelayMaster OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the delay configured for the primary link of a serial interface." ::= { hwNbCommonEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.6 hwNbTimeDelaySlave OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the delay configured for the secondary link of a serial interface." ::= { hwNbCommonEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.23.5.1.7 hwNbRealTimeDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the real-time delay of a serial interface." ::= { hwNbCommonEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.24 hwLinkHeartbeat OBJECT IDENTIFIER ::= { hwPortMIBObjects 24 } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1 hwLinkHeartbeatFaultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLinkHeartbeatFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link-heartbeat alarm fault info table.The table that contains send packets interface and receive packets interface information currently operating on this device." ::= { hwLinkHeartbeat 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1.1 hwLinkHeartbeatFaultEntry OBJECT-TYPE SYNTAX HwLinkHeartbeatFaultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link-heartbeat alarm fault info entry." INDEX { hwLinkHeartbeatIfindex } ::= { hwLinkHeartbeatFaultTable 1 } HwLinkHeartbeatFaultEntry ::= SEQUENCE { hwLinkHeartbeatIfindex InterfaceIndex, hwLinkHeartbeatIfName OCTET STRING, hwLinkHeartbeatTxInterface OCTET STRING, hwLinkHeartbeatRxInterface OCTET STRING } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.1 hwLinkHeartbeatIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index." ::= { hwLinkHeartbeatFaultEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.2 hwLinkHeartbeatIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface name." ::= { hwLinkHeartbeatFaultEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.3 hwLinkHeartbeatTxInterface OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The send physical interface name." ::= { hwLinkHeartbeatFaultEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.24.1.1.4 hwLinkHeartbeatRxInterface OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The receive physical interface name." ::= { hwLinkHeartbeatFaultEntry 4 } hwPortNotifications OBJECT IDENTIFIER ::= { hwPortMIB 2 } hwPortACRMasterPWChange NOTIFICATION-TYPE OBJECTS { hwDs0ChannelBundleParentIfIndex, hwDs0ChannelBundleDs1ChannelId, hwDs0ChannelBundleId, hwDs0ChannelBundlePortName, hwDs0ChannelBundleIsMasterPW, hwDs0ChannelBundleMasterPWStatus} STATUS current DESCRIPTION "CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change." ::= { hwPortNotifications 1 } hwDslImaGroupTraps OBJECT IDENTIFIER ::= { hwPortNotifications 2 } hwDslImaGroupLEDown NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName} STATUS current DESCRIPTION "The ima group local edge down notification." ::= { hwDslImaGroupTraps 1 } hwDslImaGroupLEUp NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName} STATUS current DESCRIPTION "The ima group local edge up notification." ::= { hwDslImaGroupTraps 2 } hwDslImaGroupREDown NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName} STATUS current DESCRIPTION "The ima group remote edge down notification." ::= { hwDslImaGroupTraps 3 } hwDslImaGroupREUp NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslGroupImaIfName} STATUS current DESCRIPTION "The ima group remote edge up notification." ::= { hwDslImaGroupTraps 4 } hwDslImaLinkTraps OBJECT IDENTIFIER ::= { hwPortNotifications 3 } hwDslImaLinkLif NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link lif notification." ::= { hwDslImaLinkTraps 1 } hwDslImaLinkLifResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link lif resume notification." ::= { hwDslImaLinkTraps 2 } hwDslImaLinkLods NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link lods notification." ::= { hwDslImaLinkTraps 3 } hwDslImaLinkLodsResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link lods resume notification." ::= { hwDslImaLinkTraps 4 } hwDslImaLinkRfi NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link rfi notification." ::= { hwDslImaLinkTraps 5 } hwDslImaLinkRfiResume NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link rfi resume notification." ::= { hwDslImaLinkTraps 6 } hwDslImaLinkReTxUnusable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link remote tx unusable notification." ::= { hwDslImaLinkTraps 7 } hwDslImaLinkReTxUsable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link remote tx usable notification." ::= { hwDslImaLinkTraps 8 } hwDslImaLinkReRxUnusable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link remote rx unusable notification." ::= { hwDslImaLinkTraps 9 } hwDslImaLinkReRxUsable NOTIFICATION-TYPE OBJECTS { hwDslGroupImaIfIndex, hwDslLinkIfIndex, hwDslGroupImaIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The ima link remote tx usable notification." ::= { hwDslImaLinkTraps 10 } hwDslLinkTraps OBJECT IDENTIFIER ::= { hwPortNotifications 4 } hwDslLinkFrameLost NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The dsl link frame lost notification." ::= { hwDslLinkTraps 1 } hwDslLinkFrameResume NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName} STATUS current DESCRIPTION "The dsl link frame resume notification." ::= { hwDslLinkTraps 2 } hwDslLinkSignalLost NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName, hwPhysicalPortAlarmName} STATUS current DESCRIPTION "The dsl link signal lost notification." ::= { hwDslLinkTraps 3 } hwDslLinkSignalResume NOTIFICATION-TYPE OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwBoundDslGroupIfName, hwDslLinkIfName, hwPhysicalPortAlarmName} STATUS current DESCRIPTION "The dsl link signal resume notification." ::= { hwDslLinkTraps 4 } hwCesPwRemoteLosPktAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 5 } hwCesPwRemoteLosPktAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 6 } hwCesPwOppositeRai NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 7 } hwCesPwOppositeRaiResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 8 } hwLosAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName, hwPhysicalPortAlarmName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 9 } hwLosAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName, hwPhysicalPortAlarmName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 10 } hwLofAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 11 } hwLofAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 12 } hwOofAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 13 } hwOofAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 14 } hwB1TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 15 } hwB1TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 16 } hwB2TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 17 } hwB2TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 18 } hwJ0TimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 19 } hwJ0TimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 20 } hwLrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 21 } hwLrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 22 } hwSfbereAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 23 } hwSfbereAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 24 } hwAuLopAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 25 } hwAuLopAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 26 } hwLaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 27 } hwLaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 28 } hwSdbereAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 29 } hwSdbereAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 30 } hwPtimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 31 } hwPtimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 32 } hwPuneqAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 33 } hwPuneqAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 34 } hwPrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 35 } hwPrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 36 } hwB3TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 37 } hwB3TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 38 } hwPplmAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 39 } hwPplmAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 40 } hwPaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 41 } hwPaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 42 } hwAuAisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 43 } hwAuAisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 44 } hwVlopAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 45 } hwVlopAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 46 } hwLomAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 47 } hwLomAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 48 } hwLpTimVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 49 } hwLpTimVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 50 } hwLpUneqVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 51 } hwLpUneqVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 52 } hwVrdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 53 } hwVrdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 54 } hwBip2TcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 57 } hwBip2TcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 58 } hwLpSlmVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 59 } hwLpSlmVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 60 } hwTuAisVc12Alarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 61 } hwTuAisVc12AlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 62 } hwE1EsTcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 63 } hwE1EsTcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 64 } hwE1LmfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 67 } hwE1LmfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 68 } hwE1UpE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 69 } hwE1UpE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 70 } hwE1AlmE1RaiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 71 } hwE1AlmE1RaiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 72 } hwCesPwOppositeAcFault NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 73 } hwCesPwOppositeAcFaultResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 74 } hwCesLosPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 75 } hwCesLosPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 76 } hwCesMisorderPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 77 } hwCesMisorderPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 78 } hwCesStrayPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 79 } hwCesStrayPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 80 } hwCesMalPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 81 } hwCesMalPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 82 } hwCesJtrUdrExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 83 } hwCesJtrUdrExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 84 } hwCesJtrOvrExcAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 85 } hwCesJtrOvrExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 86 } hwRroolAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 87 } hwRroolAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 88 } hwVrfiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 89 } hwVrfiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 90 } hwV5VcaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 91 } hwV5VcaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 92 } hwCposE1AlmE1RaiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 95 } hwCposE1AlmE1RaiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 96 } hwCposE1LfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 97 } hwCposE1LfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 98 } hwCposE1UpE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 99 } hwCposE1UpE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 100 } hwCposE1DownE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 101 } hwCposE1DownE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 102 } hwE1DownE1AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 103 } hwE1DownE1AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 104 } hwCposE1LmfaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 111 } hwCposE1LmfaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 112 } hwLaserShutAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 113 } hwLaserShutAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 114 } hwLaserAutoShutAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 115 } hwLaserAutoShutAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 116 } hwLoopbackAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPhysicalLoopbackType} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 117 } hwLoopbackAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPhysicalLoopbackType} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 118 } hwOcdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 119 } hwOcdAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 120 } hwLcdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 121 } hwLcdAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 122 } hwUhcsAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 123 } hwUhcsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 124 } hwChcsAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 125 } hwChcsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 126 } hwChannelLoopbackAlarm NOTIFICATION-TYPE OBJECTS { hwSDHHpPerfCurrentIfIndex, hwSDHLpPerfCurrentIfIndex, hwPhysicalLoopbackType, hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 127 } hwChannelLoopbackAlarmResume NOTIFICATION-TYPE OBJECTS { hwSDHHpPerfCurrentIfIndex, hwSDHLpPerfCurrentIfIndex, hwPhysicalLoopbackType, hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 128 } hwCesLopsAlarm NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 129 } hwCesLopsAlarmResume NOTIFICATION-TYPE OBJECTS { hwPWCesVcID, hwPWCesVcType, hwPeerIpAddr, hwPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 130 } hwAtmPwLosPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 131 } hwAtmPwLosPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 132 } hwAtmPwMisorderPktExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 133 } hwAtmPwMisorderPktExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 134 } hwAtmPwUnknownCellExcAlarm NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 135 } hwAtmPwUnknownCellExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwAtmVcID, hwAtmVcType, hwAtmPeerIpAddr, hwAtmPWPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 136 } hwInputErrorAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port input errors notification." ::= { hwPortNotifications 153 } hwInputErrorAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port input errors resume notification." ::= { hwPortNotifications 154 } hwOutputErrorAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port output errors notification." ::= { hwPortNotifications 155 } hwOutputErrorAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "The port output errors resume notification." ::= { hwPortNotifications 156 } hwPortAlarmTraps OBJECT IDENTIFIER ::= { hwPortNotifications 157 } hwPhysicalPortCrcError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval} STATUS current DESCRIPTION "Port Crc error alarm notification." ::= { hwPortAlarmTraps 1 } hwPhysicalPortCrcErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval} STATUS current DESCRIPTION "Port Crc error alarm resume." ::= { hwPortAlarmTraps 2 } hwPhysicalPortSymbolError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval} STATUS current DESCRIPTION "Port Symbol error alarm notification." ::= { hwPortAlarmTraps 3 } hwPhysicalPortSymbolErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval} STATUS current DESCRIPTION "Port Symbol error alarm resume." ::= { hwPortAlarmTraps 4 } hwPhysicalPortSdhError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval} STATUS current DESCRIPTION "Port Sdh error alarm notification." ::= { hwPortAlarmTraps 5 } hwPhysicalPortSdhErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval} STATUS current DESCRIPTION "Port Sdh error alarm resume." ::= { hwPortAlarmTraps 6 } hwPhysicalPortBip8SdError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortBIP8SDErrorThreshold} STATUS current DESCRIPTION "Port BIP8 Signal Degrade alarm notification." ::= { hwPortAlarmTraps 7 } hwPhysicalPortBip8SdErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortBIP8SDErrorThreshold} STATUS current DESCRIPTION "Port BIP8 Signal Degrade alarm resume." ::= { hwPortAlarmTraps 8 } hwPhysicalPortCrcPacketErrorRatio NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerAlarmThresholdString, hwPhysicalPortCrcPerResumeThresholdString} STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) alarm notification." ::= { hwPortAlarmTraps 9 } hwPhysicalPortCrcPacketErrorRatioResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerAlarmThresholdString, hwPhysicalPortCrcPerResumeThresholdString} STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) alarm resume notification." ::= { hwPortAlarmTraps 10 } hwPhysicalPortCrcSd NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcSdAlarmThresholdString, hwPhysicalPortCrcSdResumeThresholdString} STATUS current DESCRIPTION "Port MAC_FCS_SD alarm notification." ::= { hwPortAlarmTraps 11 } hwPhysicalPortCrcSdResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcSdAlarmThresholdString, hwPhysicalPortCrcSdResumeThresholdString} STATUS current DESCRIPTION "Port MAC_FCS_SD alarm resume." ::= { hwPortAlarmTraps 12 } hwPhysicalPortCrcExc NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcExcAlarmThresholdString, hwPhysicalPortCrcExcResumeThresholdString} STATUS current DESCRIPTION "Port MAC_FCS_EXC alarm notification." ::= { hwPortAlarmTraps 13 } hwPhysicalPortCrcExcResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcExcAlarmThresholdString, hwPhysicalPortCrcExcResumeThresholdString} STATUS current DESCRIPTION "Port MAC_FCS_EXC alarm resume notification." ::= { hwPortAlarmTraps 14 } hwPhysicalPortCrcPerWarning NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerWarningThresholdString, hwPhysicalPortCrcPerWarningResumeThresholdString} STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) warning notification." ::= { hwPortAlarmTraps 15 } hwPhysicalPortCrcPerWarningResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerWarningThresholdString, hwPhysicalPortCrcPerWarningResumeThresholdString} STATUS current DESCRIPTION "Port CRC-PER(Packet Error Ratio) warning resume notification." ::= { hwPortAlarmTraps 16 } hwPhysicalPortFlowSurge OBJECT IDENTIFIER ::= { hwPortAlarmTraps 17 } hwInputBroadcastSurgeOccur NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Input broadcast surge occurred." ::= { hwPhysicalPortFlowSurge 1 } hwInputBroadcastSurgeResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Input broadcast surge resumed." ::= { hwPhysicalPortFlowSurge 2 } hwOutputBroadcastSurgeOccur NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Output broadcast surge occurred." ::= { hwPhysicalPortFlowSurge 3 } hwOutputBroadcastSurgeResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Output broadcast surge resumed." ::= { hwPhysicalPortFlowSurge 4 } hwPortCrcRateExceed NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortCrcPerCurrentValueString, hwPhysicalPortCrcPerAlarmThresholdString} STATUS current DESCRIPTION "Indicates that the rate of the incoming traffic packets with CRC error exceeds the alarm threshold." ::= { hwPortAlarmTraps 18 } hwPortErrorRateExceed NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwPhysicalPortErrorPerCurrentValueString, hwPhysicalPortErrorPerAlarmThresholdString} STATUS current DESCRIPTION "Indicates that the rate of the incoming traffic error packets exceeds the alarm threshold." ::= { hwPortAlarmTraps 19 } hwPhysicalPortInBroadcastRapidChange NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName, hwInputBroadcastChangeThreshold, hwCurrentStatisticalInputBroadcast, hwBaseStatisticalInputBroadcast} STATUS current DESCRIPTION "Indicates that the rate of the input broadcast exceeds the threshold." ::= { hwPortAlarmTraps 20 } hwLoopBackAutoClearNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "set port undo loopback while set loopback autoclear enable when time out." ::= { hwPortNotifications 160 } hwChannelLoopBackAutoClearNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwDs1ChannelId} STATUS current DESCRIPTION "set channel undo loopback while set loopback autoclear enable when time out." ::= { hwPortNotifications 161 } hwHpJ1TiuAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Trace Identifier Unstable in the Higher order Path." ::= { hwPortNotifications 162 } hwHpJ1TiuAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Trace Identifier Unstable in the Higher order Path alarm resume." ::= { hwPortNotifications 163 } hwPortAlarmInverseAutoRecover NOTIFICATION-TYPE OBJECTS { hwPhysicalPortName} STATUS current DESCRIPTION "Port alarm inverse auto recover." ::= { hwPortNotifications 164 } hwB1ExcAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 165 } hwB1ExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 166 } hwB3ExcAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 167 } hwB3ExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 168 } hwBip2ExcAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 169 } hwBip2ExcAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 170 } hwLicenseLimitAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 171 } hwLicenseLimitAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 172 } hwOpticalModuleIsNotAuthorized NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName} STATUS current DESCRIPTION "Optical Module is not Authorized alarm notification." ::= { hwPortNotifications 173 } hwOpticalModuleIsNotAuthorizedResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortThrIfIndex, hwPhysicalPortThrName} STATUS current DESCRIPTION "Optical Module is not Authorized alarm resume notification." ::= { hwPortNotifications 174 } hwLocalFaultAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The Local Fault alarm has occured. Local Fault indicates a fault detected on the receive data path between the remote and the local." ::= { hwPortNotifications 175 } hwLocalFaultAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The Local Fault alarm has resumed." ::= { hwPortNotifications 176 } hwRemoteFaultAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The Remote Fault alarm has occured. Remote Fault indicates a fault on the transmit path between the local and the remote." ::= { hwPortNotifications 177 } hwRemoteFaultAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The Remote Fault alarm has resumed." ::= { hwPortNotifications 178 } hwCopperPolarityError NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The copper polarity error alarm has occurred. Polarity errors have detected on receive twisted-pairs, please change a new one." ::= { hwPortNotifications 179 } hwCopperPolarityErrorResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The copper polarity error alarm has resumed." ::= { hwPortNotifications 180 } hwLotuaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 181 } hwLotuaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 182 } hwLotulomAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 183 } hwLotulomAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 184 } hwLotusdberAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 185 } hwLotusdberAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 186 } hwLotusfberAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 187 } hwLotusfberAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 188 } hwLoduaisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 189 } hwLoduaisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 190 } hwLodulckAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 191 } hwLodulckAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 192 } hwLoduociAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 193 } hwLoduociAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 194 } hwLpmbdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 195 } hwLpmbdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 196 } hwLpmtimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 197 } hwLpmtimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 198 } hwLsmbdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 199 } hwLsmbdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 200 } hwLsmiaeAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 201 } hwLsmiaeAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 202 } hwLsmtimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 203 } hwLsmtimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 204 } hwNegotiationFailedAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies; the local ability is not compatible with the peer; the physical connection of the two sides is unstable. When the alarm occurs, the port can't be up." ::= { hwPortNotifications 205 } hwNegotiationFailedAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Auto-negotiation failure alarm resume." ::= { hwPortNotifications 206 } hwEthHalfDuplex NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "The port works in the half-duplex mode." ::= { hwPortNotifications 207 } hwEthFullDuplex NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "The half-duplex mode alarm resume." ::= { hwPortNotifications 208 } hwPhysicalPortAutoDetectFail NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Interface auto adapter fail alarm notification." ::= { hwPortNotifications 209 } hwPhysicalPortAutoDetectSuccess NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Interface auto adapter fail alarm resume notification." ::= { hwPortNotifications 210 } hwNotSameBoardInTrunk NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Not same boards in Eth-trunk." ::= { hwPortNotifications 211 } -- 1.3.6.1.4.1.2011.5.25.157.2.212 hwOtnAlarm OBJECT IDENTIFIER ::= { hwPortNotifications 212 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.1 hwOtuLomAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.2 hwOtuLomAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.3 hwOtuAisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.4 hwOtuAisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.5 hwOtuSdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 5 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.6 hwOtuSdAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 6 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.7 hwOtuSfAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 7 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.8 hwOtuSfAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 8 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.9 hwSmBdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 9 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.10 hwSmBdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 10 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.11 hwSmIaeAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 11 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.12 hwSmIaeAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 12 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.13 hwSmTimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 13 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.14 hwSmTimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 14 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.15 hwOduAisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 15 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.16 hwOduAisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 16 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.17 hwOduLokAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 17 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.18 hwOduLokAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 18 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.19 hwOduOciAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 19 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.20 hwOduOciAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 20 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.21 hwPmBdiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 21 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.22 hwPmBdiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 22 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.23 hwPmTimAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 23 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.24 hwPmTimAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 24 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.25 hwPrefecTcaAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwOtnAlarm 25 } -- 1.3.6.1.4.1.2011.5.25.157.2.212.26 hwPrefecTcaAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName } STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwOtnAlarm 26 } -- 1.3.6.1.4.1.2011.5.25.157.2.213 hwE3UpE3AisAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 213 } -- 1.3.6.1.4.1.2011.5.25.157.2.214 hwE3UpE3AisAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 214 } -- 1.3.6.1.4.1.2011.5.25.157.2.215 hwE3AlmE3RaiAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is detected." ::= { hwPortNotifications 215 } -- 1.3.6.1.4.1.2011.5.25.157.2.216 hwE3AlmE3RaiAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Indicates the alarm is cleared." ::= { hwPortNotifications 216 } -- 1.3.6.1.4.1.2011.5.25.157.2.217 hwMultiServiceOnOneCardAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard} STATUS current DESCRIPTION "Multiple services be configured on the same chip of the card." ::= { hwPortNotifications 217 } -- 1.3.6.1.4.1.2011.5.25.157.2.218 hwMultiServiceOnOneCardAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard} STATUS current DESCRIPTION "There is no multiple services on the same chip of the card." ::= { hwPortNotifications 218 } -- 1.3.6.1.4.1.2011.5.25.157.2.219 hwInputRateChangeOverThresholdNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortName, hwInputRateChangeThresholdPercent, hwCurrentStatisticalPeriodRate, hwLastStatisticalPeriodRate} STATUS current DESCRIPTION "The input rate change ratio exceeded the threshold." ::= { hwPortNotifications 219 } -- 1.3.6.1.4.1.2011.5.25.157.2.220 hwOutputRateChangeOverThresholdNotice NOTIFICATION-TYPE OBJECTS { hwPhysicalPortName, hwOutputRateChangeThresholdPercent, hwCurrentStatisticalPeriodRate, hwLastStatisticalPeriodRate} STATUS current DESCRIPTION "The output rate change ratio exceeded the threshold." ::= { hwPortNotifications 220 } -- 1.3.6.1.4.1.2011.5.25.157.2.221 hwNarrowBandTraps OBJECT IDENTIFIER ::= { hwPortNotifications 221 } -- 1.3.6.1.4.1.2011.5.25.157.2.221.1 hwX50LofAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "X.50 sub-rate out of frame occurred." ::= { hwNarrowBandTraps 1 } -- 1.3.6.1.4.1.2011.5.25.157.2.221.2 hwX50LofAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "X.50 sub-rate out of frame was cleared." ::= { hwNarrowBandTraps 2 } -- 1.3.6.1.4.1.2011.5.25.157.2.221.3 hwX50AbitAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "X.50 deframing failed on the remote device." ::= { hwNarrowBandTraps 3 } -- 1.3.6.1.4.1.2011.5.25.157.2.221.4 hwX50AbitAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "The X.50 deframing failure was cleared on the remote device." ::= { hwNarrowBandTraps 4 } -- 1.3.6.1.4.1.2011.5.25.157.2.222 hwLinkHeartbeatDropAlarm NOTIFICATION-TYPE OBJECTS { hwLinkHeartbeatIfindex, hwLinkHeartbeatIfName, hwLinkHeartbeatTxInterface, hwLinkHeartbeatRxInterface } STATUS current DESCRIPTION "Link-heartbeat drop alarm." ::= { hwPortNotifications 222 } -- 1.3.6.1.4.1.2011.5.25.157.2.223 hwLinkHeartbeatDropAlarmResume NOTIFICATION-TYPE OBJECTS { hwLinkHeartbeatIfindex, hwLinkHeartbeatIfName, hwLinkHeartbeatTxInterface, hwLinkHeartbeatRxInterface } STATUS current DESCRIPTION "Link-heartbeat drop alarm resume." ::= { hwPortNotifications 223 } -- 1.3.6.1.4.1.2011.5.25.157.2.224 hwLinkHeartbeatChangeAlarm NOTIFICATION-TYPE OBJECTS { hwLinkHeartbeatIfindex, hwLinkHeartbeatIfName, hwLinkHeartbeatTxInterface, hwLinkHeartbeatRxInterface } STATUS current DESCRIPTION "Link-heartbeat change alarm." ::= { hwPortNotifications 224 } -- 1.3.6.1.4.1.2011.5.25.157.2.225 hwLinkHeartbeatChangeAlarmResume NOTIFICATION-TYPE OBJECTS { hwLinkHeartbeatIfindex, hwLinkHeartbeatIfName, hwLinkHeartbeatTxInterface, hwLinkHeartbeatRxInterface } STATUS current DESCRIPTION "Link-heartbeat change alarm resume." ::= { hwPortNotifications 225 } -- 1.3.6.1.4.1.2011.5.25.157.2.226 hwPortPhysicalRateDegradeAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPortPhysicalRate} STATUS current DESCRIPTION "The physical rate degrade alarm." ::= { hwPortNotifications 226 } -- 1.3.6.1.4.1.2011.5.25.157.2.227 hwPortPhysicalRateDegradeAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The physical rate degrade alarm resume." ::= { hwPortNotifications 227 } -- 1.3.6.1.4.1.2011.5.25.157.2.228 hwLicenseInactiveAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwLicenseType } STATUS current DESCRIPTION "The interface license was not activated." ::= { hwPortNotifications 228 } -- 1.3.6.1.4.1.2011.5.25.157.2.229 hwLicenseInactiveAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwLicenseType } STATUS current DESCRIPTION "The interface license inactivation alarm was cleared." ::= { hwPortNotifications 229 } -- 1.3.6.1.4.1.2011.5.25.157.2.230 hwLicenseResourceLackAlarm NOTIFICATION-TYPE OBJECTS { hwLicenseType, hwMaxPortNum, hwUsedPortNum } STATUS current DESCRIPTION "Interfaces of this type in use exceeded the maximum number." ::= { hwPortNotifications 230 } -- 1.3.6.1.4.1.2011.5.25.157.2.231 hwLicenseResourceLackAlarmResume NOTIFICATION-TYPE OBJECTS { hwLicenseType, hwMaxPortNum, hwUsedPortNum } STATUS current DESCRIPTION "The maximum number-crossing alarm was cleared." ::= { hwPortNotifications 231 } -- 1.3.6.1.4.1.2011.5.25.157.2.232 hwPortModeChangeTrap NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwPhysicalPortMode} STATUS current DESCRIPTION "Indicates the mode of a port is changed." ::= { hwPortNotifications 232 } -- 1.3.6.1.4.1.2011.5.25.157.2.233 hwRdiAlarm NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The peer end was faulty." ::= { hwPortNotifications 233 } -- 1.3.6.1.4.1.2011.5.25.157.2.234 hwRdiAlarmResume NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The peer end recovered from faults." ::= { hwPortNotifications 234 } -- 1.3.6.1.4.1.2011.5.25.157.2.235 hwAisAlarm NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Upstream signals were abnormal." ::= { hwPortNotifications 235 } -- 1.3.6.1.4.1.2011.5.25.157.2.236 hwAisAlarmResume NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Upstream signals recovered." ::= { hwPortNotifications 236 } -- 1.3.6.1.4.1.2011.5.25.157.2.237 hwCollisionAlarm NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwScadaGroupId, hwPhysicalPortName} STATUS current DESCRIPTION "The link encountered a collision." ::= { hwPortNotifications 237 } -- 1.3.6.1.4.1.2011.5.25.157.2.238 hwCollisionAlarmResume NOTIFICATION-TYPE OBJECTS {hwPhysicalPortIfIndex, hwScadaGroupId, hwPhysicalPortName} STATUS current DESCRIPTION "The link recovered from a collision." ::= { hwPortNotifications 238 } -- 1.3.6.1.4.1.2011.5.25.157.2.239 hwSubIfNumExceededSpecAlarm NOTIFICATION-TYPE OBJECTS { hwSubIfSpecNum } STATUS current DESCRIPTION "The nunber of sub interface exceeded spec alarm." ::= { hwPortNotifications 239 } -- 1.3.6.1.4.1.2011.5.25.157.2.240 hwSubIfNumExceededSpecAlarmResume NOTIFICATION-TYPE OBJECTS { hwSubIfSpecNum } STATUS current DESCRIPTION "The number of sub interface exceeded spec alarm resume." ::= { hwPortNotifications 240 } hwPortSpeedChangeTrap NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex,hwPhysicalPortName, hwPhysicalPortLastSpeed, hwPhysicalPortCurSpeed } STATUS current DESCRIPTION "The speed of port is changed." ::= { hwPortNotifications 241 } -- 1.3.6.1.4.1.2011.5.25.157.2.242 hwPortGroupTransModeDiff NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortGroupID, hwPortTransModeReasonDescr } STATUS current DESCRIPTION "This group of interfaces do not work in the same transmission mode." ::= { hwPortNotifications 242 } -- 1.3.6.1.4.1.2011.5.25.157.2.243 hwPortGroupTransModeDiffResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortGroupID, hwPortTransModeReasonDescr } STATUS current DESCRIPTION "This group of interfaces work in the same transmission mode now." ::= { hwPortNotifications 243 } -- 1.3.6.1.4.1.2011.5.25.157.2.244 hwImpedanceMismatch NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "The configured interface impedance value did not match that of the cable." ::= { hwPortNotifications 244 } -- 1.3.6.1.4.1.2011.5.25.157.2.245 hwPicLcdAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Loss of code group synchronization alarm is detected." ::= { hwPortNotifications 245 } -- 1.3.6.1.4.1.2011.5.25.157.2.246 hwPicLcdAlarmResume NOTIFICATION-TYPE OBJECTS {hwPhysicalPortInSlot, hwPhysicalPortInCard, hwPhysicalPortInPort, hwPhysicalPortName} STATUS current DESCRIPTION "Loss of code group synchronization alarm is cleared." ::= { hwPortNotifications 246 } -- 1.3.6.1.4.1.2011.5.25.157.2.247 hwBoardNotSupportAssignTrunk NOTIFICATION-TYPE OBJECTS { entPhysicalName } STATUS current DESCRIPTION "The card does not support extensions of Eth-Trunk specifications." ::= { hwPortNotifications 247 } -- 1.3.6.1.4.1.2011.5.25.157.2.248 hwPortProtectGroupUnavailable NOTIFICATION-TYPE OBJECTS { hwPortProtectGroupId } STATUS current DESCRIPTION "The port protection group is unavailable." ::= { hwPortNotifications 248 } -- 1.3.6.1.4.1.2011.5.25.157.2.249 hwPortProtectGroupAvailable NOTIFICATION-TYPE OBJECTS { hwPortProtectGroupId } STATUS current DESCRIPTION "The port protection group is available." ::= { hwPortNotifications 249 } -- 1.3.6.1.4.1.2011.5.25.157.2.250 hwPortProtectGroupDelete NOTIFICATION-TYPE OBJECTS { hwPortProtectGroupId } STATUS current DESCRIPTION "The port protection group was deleted." ::= { hwPortNotifications 250 } -- 1.3.6.1.4.1.2011.5.25.157.2.251 hwDelayOverConfig NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Real-time E2E Delay Exceeded the Configured Delay." ::= { hwPortNotifications 251 } -- 1.3.6.1.4.1.2011.5.25.157.2.252 hwDelayOverConfigResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName } STATUS current DESCRIPTION "Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared." ::= { hwPortNotifications 252 } -- 1.3.6.1.4.1.2011.5.25.157.2.253 hwAcBlockAlarm NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwAcBlockReason } STATUS current DESCRIPTION "AC interface blocking alarm." ::= { hwPortNotifications 253 } -- 1.3.6.1.4.1.2011.5.25.157.2.254 hwAcBlockAlarmResume NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName, hwAcBlockReason } STATUS current DESCRIPTION "AC interface blocking alarm clearing." ::= { hwPortNotifications 254 } -- 1.3.6.1.4.1.2011.5.25.157.2.255 hwPortLicenseActFail NOTIFICATION-TYPE OBJECTS {hwGtlItemName, hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Failed to activate the port license." ::= { hwPortNotifications 255 } -- 1.3.6.1.4.1.2011.5.25.157.2.256 hwPortLicenseActSuccess NOTIFICATION-TYPE OBJECTS {hwGtlItemName, hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "Succeed to activate the port license." ::= { hwPortNotifications 256 } -- 1.3.6.1.4.1.2011.5.25.157.2.257 hwCableSnrAbnormal NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The network cable is of poor quality." ::= { hwPortNotifications 257 } -- 1.3.6.1.4.1.2011.5.25.157.2.258 hwCableSnrNormal NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The network cable is of good quality." ::= { hwPortNotifications 258 } -- 1.3.6.1.4.1.2011.5.25.157.2.259 hwCableSnrDetectNotSupport NOTIFICATION-TYPE OBJECTS { hwPhysicalPortIfIndex, hwPhysicalPortName} STATUS current DESCRIPTION "The network cable quality cannot be detected." ::= { hwPortNotifications 259 } hwPortTotalStatistics OBJECT IDENTIFIER ::= { hwPortMIBObjects 25 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1 hwPortTotalStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortTotalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the port total statistics." ::= { hwPortTotalStatistics 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1 hwPortTotalStatEntry OBJECT-TYPE SYNTAX HwPortTotalStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the port total statistics." INDEX { hwPortTotalStatIfIndex } ::= { hwPortTotalStatTable 1 } HwPortTotalStatEntry ::= SEQUENCE { hwPortTotalStatIfIndex InterfaceIndex, hwPortTotalStatIfName OCTET STRING, hwPortTotalStatInPkts Counter64, hwPortTotalStatInOctets Counter64, hwPortTotalStatInErrors Counter64, hwPortTotalStatOutPkts Counter64, hwPortTotalStatOutOctets Counter64, hwPortTotalStatOutErrors Counter64 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.1 hwPortTotalStatIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this interface." ::= { hwPortTotalStatEntry 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.2 hwPortTotalStatIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this interface." ::= { hwPortTotalStatEntry 2 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.3 hwPortTotalStatInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Received total Pkts stat of this interface." ::= { hwPortTotalStatEntry 3 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.4 hwPortTotalStatInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Received total Octets stat of this interface." ::= { hwPortTotalStatEntry 4 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.5 hwPortTotalStatInErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Received total error Pkts stat of this interface." ::= { hwPortTotalStatEntry 5 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.6 hwPortTotalStatOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Send total Pkts stat of this interface." ::= { hwPortTotalStatEntry 6 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.7 hwPortTotalStatOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Send total Octets stat of this interface." ::= { hwPortTotalStatEntry 7 } -- 1.3.6.1.4.1.2011.5.25.157.1.25.1.1.8 hwPortTotalStatOutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Send total error Pkts stat of this interface." ::= { hwPortTotalStatEntry 8 } -- 1.3.6.1.4.1.2011.5.25.157.1.26 hwSubIfNumExceededSpecTrapObject OBJECT IDENTIFIER ::= { hwPortMIBObjects 26 } -- 1.3.6.1.4.1.2011.5.25.157.1.26.1 hwSubIfSpecNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of sub interface spec." ::= { hwSubIfNumExceededSpecTrapObject 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.27 hwPortSpeedTrapObjects OBJECT IDENTIFIER ::= { hwPortMIBObjects 27 } -- 1.3.6.1.4.1.2011.5.25.157.1.27.1 hwPhysicalPortCurSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The speed of port after change." ::= { hwPortSpeedTrapObjects 1 } -- 1.3.6.1.4.1.2011.5.25.157.1.27.2 hwPhysicalPortLastSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The speed of port before change." ::= { hwPortSpeedTrapObjects 2 } hwPortConformance OBJECT IDENTIFIER ::= { hwPortMIB 11 } hwPortCompliances OBJECT IDENTIFIER ::= { hwPortConformance 1 } hwPortCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI-PORT-MIB." MODULE MANDATORY-GROUPS {hwEthernetObjectGroup,hwPosObjectGroup,hwCposObjectGroup,hwBundleSerialObjectGroup,hwDs0ChannelBundleObjectGroup,hwDs1ObjectGroup,hwDs3ObjectGroup,hwPortNotificationsGroup,hwPortAlarmThresholdObjectGroup,hwPortAlarmDownEnableObjectGroup,hwLogicalPortObjectGroup,hwPortSpeedTrapObjectsGroup} ::= { hwPortCompliances 1 } hwPortGroups OBJECT IDENTIFIER ::= { hwPortConformance 2 } hwEthernetObjectGroup OBJECT-GROUP OBJECTS { hwEthernetLoopback, hwEthernetPortType, hwEthernetSpeedSet, hwEthernetDuplex, hwEthernetNegotiation, hwEthernetPortTypeOperate, hwEthernetClock, hwEthernetFlagJ0Mode, hwEthernetFlagJ0Value, hwEthernetFlagJ0Trace, hwEthernetFlagJ1Mode, hwEthernetFlagJ1Value, hwEthernetFlagJ1Trace, hwEthernetFlagC2Value, hwEthernetUpHoldTime, hwEthernetDownHoldTime, hwEthernetSubinterfaceStatisticEnable, hwEthernetJumboframeMaxLength, hwEthernetComboType, hwEthernetPortMode } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 1 } hwPosObjectGroup OBJECT-GROUP OBJECTS { hwPosLinkProtocol, hwPosFrameFormat, hwPosLoopback, hwPosScramble, hwPosClock, hwPosCrcVerifyCode, hwPosFlagJ0Mode, hwPosFlagJ0Value, hwPosFlagJ0Trace, hwPosFlagJ1Mode, hwPosFlagJ1Value, hwPosFlagJ1Trace, hwPosFlagC2Value } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 2 } hwCposObjectGroup OBJECT-GROUP OBJECTS { hwCposFrameFormat, hwCposMultiplex, hwCposClock, hwCposIfType, hwCposLoopback, hwCposFlagJ0Mode, hwCposFlagJ0Value, hwCposFlagJ0Trace, hwCposFlagJ1Mode, hwCposFlagJ1Value, hwCposFlagJ1Trace, hwCposFlagC2Value, hwCposB1SdAlarmThreshold, hwCposB1ExcAlarmThreshold, hwCposB2SdAlarmThreshold, hwCposB2ExcAlarmThreshold, hwCposB3SdAlarmThreshold, hwCposB3ExcAlarmThreshold, hwCposLpBipSdAlarmThreshold, hwCposLpBipExcAlarmThreshold, hwCposHighPathNumber, hwCposLowPathNumber, hwCposMappingMode } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 3 } hwDs0ChannelBundleObjectGroup OBJECT-GROUP OBJECTS { hwDs0ChannelBundleIfIndex, hwDs0ChannelBundleTimeSlots, hwDs0ChannelBundleSpeed, hwDs0ChannelBundleIsMasterPW, hwDs0ChannelBundleMasterPWStatus, hwDs0ChannelBundlePortName, hwDs0ChannelBundleRowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 4 } hwDs1ObjectGroup OBJECT-GROUP OBJECTS { hwDs1ChannelType, hwDs1IfType, hwDs1Channelized, hwDs1CodeType, hwDs1Clock, hwDs1FrameFormat, hwDs1Cable, hwDs1Loopback, hwDs1ClockRecoveryDomain, hwDs1PWClockDomain, hwDs1WorkMode, hwDs1RowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 5 } hwDs3ObjectGroup OBJECT-GROUP OBJECTS { hwDs3ChannelType, hwDs3IfType, hwDs3Channelized, hwDs3Clock, hwDs3FrameFormat, hwDs3Scramble, hwDs3Cable, hwDs3NationalBit, hwDs3Loopback, hwDs3CreateSerial, hwDs3RowStatus } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 6 } hwBundleSerialObjectGroup OBJECT-GROUP OBJECTS { hwBundleSerialLinkProtocol, hwBundleSerialTimerHold, hwBundleSerialCrcVerifyCode, hwBundleSerialLoopback } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 7 } hwPortNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwPortACRMasterPWChange, hwHpJ1TiuAlarm, hwHpJ1TiuAlarmResume, hwCesPwOppositeAcFault, hwCesPwOppositeAcFaultResume, hwCesLosPktExcAlarm, hwCesLosPktExcAlarmResume, hwCesMisorderPktExcAlarm, hwCesMisorderPktExcAlarmResume, hwCesStrayPktExcAlarm, hwCesStrayPktExcAlarmResume, hwCesMalPktExcAlarm, hwCesMalPktExcAlarmResume, hwCesJtrUdrExcAlarm, hwCesJtrUdrExcAlarmResume, hwCesJtrOvrExcAlarm, hwCesJtrOvrExcAlarmResume, hwLaserShutAlarm, hwLaserShutAlarmResume, hwLaserAutoShutAlarm, hwLaserAutoShutAlarmResume, hwLoopbackAlarm, hwLoopbackAlarmResume, hwChannelLoopbackAlarm, hwChannelLoopbackAlarmResume, hwCesPwOppositeRaiResume, hwCesPwOppositeRai, hwB1TcaAlarm, hwB1TcaAlarmResume, hwB2TcaAlarm, hwB2TcaAlarmResume, hwOofAlarm, hwOofAlarmResume, hwLosAlarm, hwLosAlarmResume, hwJ0TimAlarm, hwJ0TimAlarmResume, hwLrdiAlarm, hwLrdiAlarmResume, hwSfbereAlarm, hwSfbereAlarmResume, hwAuLopAlarm, hwAuLopAlarmResume, hwLaisAlarm, hwLaisAlarmResume, hwSdbereAlarm, hwSdbereAlarmResume, hwPtimAlarm, hwPtimAlarmResume, hwPuneqAlarm, hwPuneqAlarmResume, hwPrdiAlarm, hwPrdiAlarmResume, hwB3TcaAlarm, hwB3TcaAlarmResume, hwPplmAlarm, hwPplmAlarmResume, hwPaisAlarm, hwPaisAlarmResume, hwAuAisAlarm, hwAuAisAlarmResume, hwVlopAlarm, hwVlopAlarmResume, hwLomAlarm, hwLomAlarmResume, hwLpTimVc12Alarm, hwLpTimVc12AlarmResume, hwLofAlarm, hwLofAlarmResume, hwCesPwRemoteLosPktAlarm, hwCesPwRemoteLosPktAlarmResume, hwLpUneqVc12Alarm, hwLpUneqVc12AlarmResume, hwVrdiAlarm, hwVrdiAlarmResume, hwBip2TcaAlarm, hwBip2TcaAlarmResume, hwLpSlmVc12Alarm, hwLpSlmVc12AlarmResume, hwTuAisVc12Alarm, hwTuAisVc12AlarmResume, hwE1EsTcaAlarm, hwE1EsTcaAlarmResume, hwE1LmfaAlarm, hwE1LmfaAlarmResume, hwE1UpE1AisAlarm, hwE1UpE1AisAlarmResume, hwE1AlmE1RaiAlarm, hwE1AlmE1RaiAlarmResume, hwRroolAlarm, hwRroolAlarmResume, hwVrfiAlarm, hwVrfiAlarmResume, hwV5VcaisAlarm, hwV5VcaisAlarmResume, hwCposE1AlmE1RaiAlarm, hwCposE1AlmE1RaiAlarmResume, hwCposE1LfaAlarm, hwCposE1LfaAlarmResume, hwCposE1UpE1AisAlarm, hwCposE1UpE1AisAlarmResume, hwCposE1DownE1AisAlarm, hwCposE1DownE1AisAlarmResume, hwE1DownE1AisAlarm, hwE1DownE1AisAlarmResume, hwCposE1LmfaAlarm, hwCposE1LmfaAlarmResume, hwOcdAlarm, hwOcdAlarmResume, hwLcdAlarm, hwLcdAlarmResume, hwUhcsAlarm, hwUhcsAlarmResume, hwChcsAlarm, hwChcsAlarmResume, hwCesLopsAlarm, hwCesLopsAlarmResume, hwAtmPwLosPktExcAlarm, hwAtmPwLosPktExcAlarmResume, hwAtmPwMisorderPktExcAlarm, hwAtmPwMisorderPktExcAlarmResume, hwAtmPwUnknownCellExcAlarm, hwAtmPwUnknownCellExcAlarmResume, hwPortAlarmInverseAutoRecover, hwB1ExcAlarm, hwB1ExcAlarmResume, hwBip2ExcAlarm, hwBip2ExcAlarmResume, hwB3ExcAlarm, hwB3ExcAlarmResume, hwLoopBackAutoClearNotice, hwChannelLoopBackAutoClearNotice, hwHpJ1TiuAlarm, hwHpJ1TiuAlarmResume, hwPortAlarmInverseAutoRecover, hwB3ExcAlarm, hwB3ExcAlarmResume, hwBip2ExcAlarm, hwBip2ExcAlarmResume, hwLicenseLimitAlarm, hwLicenseLimitAlarmResume, hwRemoteFaultAlarm, hwRemoteFaultAlarmResume, hwOpticalModuleIsNotAuthorizedResume, hwLocalFaultAlarm, hwLocalFaultAlarmResume, hwOpticalModuleIsNotAuthorized, hwCopperPolarityError, hwCopperPolarityErrorResume, hwLotuaisAlarm, hwLotuaisAlarmResume, hwLotulomAlarm, hwLotulomAlarmResume, hwLotusdberAlarm, hwLotusdberAlarmResume, hwLotusfberAlarm, hwLotusfberAlarmResume, hwLoduaisAlarm, hwLoduaisAlarmResume, hwLodulckAlarm, hwLodulckAlarmResume, hwLoduociAlarm, hwLoduociAlarmResume, hwLpmbdiAlarm, hwLpmbdiAlarmResume, hwLpmtimAlarm, hwLpmtimAlarmResume, hwLsmbdiAlarm, hwLsmbdiAlarmResume, hwLsmiaeAlarm, hwLsmiaeAlarmResume, hwLsmtimAlarm, hwLsmtimAlarmResume, hwNegotiationFailedAlarm, hwNegotiationFailedAlarmResume, hwEthHalfDuplex , hwEthFullDuplex, hwE3UpE3AisAlarm, hwE3UpE3AisAlarmResume, hwE3AlmE3RaiAlarm, hwE3AlmE3RaiAlarmResume, hwInputRateChangeOverThresholdNotice, hwOutputRateChangeOverThresholdNotice, hwPortPhysicalRateDegradeAlarm, hwPortPhysicalRateDegradeAlarmResume, hwPortModeChangeTrap, hwRdiAlarm, hwRdiAlarmResume, hwAisAlarm, hwAisAlarmResume, hwCollisionAlarm, hwCollisionAlarmResume, hwPortSpeedChangeTrap, hwPortGroupTransModeDiff, hwPortGroupTransModeDiffResume, hwPicLcdAlarm, hwPicLcdAlarmResume, hwBoardNotSupportAssignTrunk, hwPortProtectGroupUnavailable, hwPortProtectGroupAvailable, hwPortProtectGroupDelete, hwPortLicenseActFail, hwPortLicenseActSuccess, hwCableSnrAbnormal, hwCableSnrNormal, hwCableSnrDetectNotSupport } STATUS current DESCRIPTION "This is the group of port notifiction." ::= { hwPortGroups 8 } hwDslGroupObjectGroup OBJECT-GROUP OBJECTS { hwDslGroupIfIndex, hwDslGroupWorkMode, hwDslGroupBisState, hwDslGroupEncapeMode, hwDslGroupEnable, hwDslGroupRowStatus, hwDslGroupIfIndexOfBound, hwVirtualEthernetIfIndex, hwBoundVeRowStatus, hwDslGroupVci, hwDslGroupVpi, hwDslGroupPvcId } STATUS current DESCRIPTION "The dsl group attribute group." ::= { hwPortGroups 9 } hwDslGroupImaObjectGroup OBJECT-GROUP OBJECTS { hwDslGroupImaVersion, hwDslGroupImaFrameLen, hwDslGroupImaReset, hwDslGroupImaRxMinLinkNum, hwDslGroupImaNeState, hwDslGroupImaRxActLinkNum, hwDslGroupImaRxCellRate, hwDslGroupImaTxActLinkNum, hwDslGroupImaTxCellRate, hwDslGroupImaFeState, hwDslGroupImaIfIndex, hwDslGroupImaTxMinLinkNum, hwDslGroupImaIfName } STATUS current DESCRIPTION "The dsl group ima attribute group." ::= { hwPortGroups 10 } hwDslLinkObjectGroup OBJECT-GROUP OBJECTS { hwBoundDslGroupIfIndex, hwDslLinkIfIndex, hwDslLinkBoundRowStatus, hwDslLinkIfName, hwBoundDslGroupIfName } STATUS current DESCRIPTION "The dsl link attribute group." ::= { hwPortGroups 11 } hwDslImaTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwDslImaGroupLEDown, hwDslImaGroupLEUp, hwDslImaGroupREDown, hwDslImaGroupREUp, hwDslImaLinkLif, hwDslImaLinkLifResume, hwDslImaLinkLods, hwDslImaLinkLodsResume, hwDslImaLinkRfi, hwDslImaLinkRfiResume, hwDslImaLinkReTxUnusable, hwDslImaLinkReTxUsable, hwDslImaLinkReRxUnusable, hwDslImaLinkReRxUsable } STATUS current DESCRIPTION "The dsl Ima Trap group." ::= { hwPortGroups 20 } hwDslLinkTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwDslLinkFrameLost, hwDslLinkFrameResume, hwDslLinkSignalLost, hwDslLinkSignalResume } STATUS current DESCRIPTION "The dsl Link Trap group." ::= { hwPortGroups 21 } hwPortAlarmThresholdObjectGroup OBJECT-GROUP OBJECTS { hwPhysicalPortCrcErrorStatistics, hwPhysicalPortCrcErrorHighThreshold, hwPhysicalPortCrcErrorLowThreshold, hwPhysicalPortCrcErrorInterval, hwPhysicalPortSymbolErrorStatistics, hwPhysicalPortSymbolErrorHighThreshold, hwPhysicalPortSymbolErrorLowThreshold, hwPhysicalPortSymbolErrorInterval, hwPhysicalPortInputErrorStatistics, hwPhysicalPortInputErrorHighThreshold, hwPhysicalPortInputErrorLowThreshold, hwPhysicalPortInputErrorInterval, hwPhysicalPortOutputErrorStatistics, hwPhysicalPortOutputErrorHighThreshold, hwPhysicalPortOutputErrorLowThreshold, hwPhysicalPortOutputErrorInterval, hwPhysicalPortSdhErrorStatistics, hwPhysicalPortSdhErrorHighThreshold, hwPhysicalPortSdhErrorLowThreshold, hwPhysicalPortSdhErrorInterval, hwPhysicalPortBIP8SDErrorThreshold, hwPhysicalPortCrcSdAlarmTriggerLsp, hwPhysicalPortCrcExcAlarmTriggerLsp } STATUS current DESCRIPTION "The port alarm threshold group." ::= { hwPortGroups 22 } hwPortAlarmDownEnableObjectGroup OBJECT-GROUP OBJECTS { hwPhysicalPortCrcEnabledDown, hwPhysicalPortSymbolEnabledDown, hwPhysicalPortInputEnabledDown, hwPhysicalPortOutputEnabledDown, hwPhysicalPortSdhEnabledDown, hwPhysicalPortBip8SdEnabledDown } STATUS current DESCRIPTION "The port alarm down enable group." ::= { hwPortGroups 23 } hwLogicalPortObjectGroup OBJECT-GROUP OBJECTS { hwLogicalPortIfIndex, hwLogicalPortStatisticEnable } STATUS current DESCRIPTION "The Port attribute group." ::= { hwPortGroups 24 } hwPortAlarmTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwPhysicalPortCrcError, hwPhysicalPortCrcErrorResume, hwPhysicalPortSymbolError, hwPhysicalPortSymbolErrorResume, hwPhysicalPortSdhError, hwPhysicalPortSdhErrorResume, hwPhysicalPortBip8SdError, hwPhysicalPortBip8SdErrorResume, hwPhysicalPortCrcPacketErrorRatio, hwPhysicalPortCrcPacketErrorRatioResume, hwPhysicalPortCrcSd, hwPhysicalPortCrcSdResume, hwPhysicalPortCrcExc, hwPhysicalPortCrcExcResume, hwPhysicalPortCrcPerWarning, hwPhysicalPortCrcPerWarningResume, hwPortCrcRateExceed, hwPortErrorRateExceed, hwPhysicalPortInBroadcastRapidChange, hwInputErrorAlarm, hwInputErrorAlarmResume, hwOutputErrorAlarm, hwOutputErrorAlarmResume, hwLicenseLimitAlarm, hwLicenseLimitAlarmResume, hwPhysicalPortAutoDetectFail, hwPhysicalPortAutoDetectSuccess, hwNotSameBoardInTrunk, hwInputBroadcastSurgeOccur, hwInputBroadcastSurgeResume, hwOutputBroadcastSurgeOccur, hwOutputBroadcastSurgeResume, hwLinkHeartbeatDropAlarm, hwLinkHeartbeatDropAlarmResume, hwLinkHeartbeatChangeAlarm, hwLinkHeartbeatChangeAlarmResume } STATUS current DESCRIPTION "The port alarm trap group." ::= { hwPortGroups 25 } hwPortPhysicalObjectGroup OBJECT-GROUP OBJECTS { hwPortPhysicalHpIndex, hwPortPhysicalLpIndex, hwLoopBackAutoClearEnable, hwPortAlarmInverseEnable, hwLoopBackAutoClearPeriod } STATUS current DESCRIPTION "The port physical object group." ::= { hwPortGroups 26 } hwPortProtectObjectGroup OBJECT-GROUP OBJECTS { hwPortProtectGroupId, hwPortProtectMasterIfIndex, hwPortProtectMasterStatus, hwPortProtectSlaveIfIndex, hwPortProtectSlaveStatus, hwPortProtectRowStatus } STATUS current DESCRIPTION "A collection of objects providing port protect group status information." ::= { hwPortGroups 27 } hwPortDescriptinonObjectGroup OBJECT-GROUP OBJECTS { hwPortDescriptionIfIndex, hwPortDescriptionIfPortDescription } STATUS current DESCRIPTION "The port description object group" ::= { hwPortGroups 28 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.29 hwOtnAlarmNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwOtuLomAlarm, hwOtuLomAlarmResume, hwOtuAisAlarm, hwOtuAisAlarmResume, hwOtuSdAlarm, hwOtuSdAlarmResume, hwOtuSfAlarm, hwOtuSfAlarmResume, hwSmBdiAlarm, hwSmBdiAlarmResume, hwSmIaeAlarm, hwSmIaeAlarmResume, hwSmTimAlarm, hwSmTimAlarmResume, hwOduAisAlarm, hwOduAisAlarmResume, hwOduLokAlarm, hwOduLokAlarmResume, hwOduOciAlarm, hwOduOciAlarmResume, hwPmBdiAlarm, hwPmBdiAlarmResume, hwPmTimAlarm, hwPmTimAlarmResume, hwPrefecTcaAlarm,hwPrefecTcaAlarmResume } STATUS current DESCRIPTION "This is the group of OTN port notifications." ::= { hwPortGroups 29 } -- 1.3.6.1.4.1.2011.5.25.157.11.2.30 hwLinkHeartbeatObjectGroup OBJECT-GROUP OBJECTS { hwLinkHeartbeatIfindex, hwLinkHeartbeatIfName, hwLinkHeartbeatTxInterface, hwLinkHeartbeatRxInterface } STATUS current DESCRIPTION "The link-heartbeat object group." ::= { hwPortGroups 30 } hwPortTotalStatObjectGroup OBJECT-GROUP OBJECTS { hwPortTotalStatIfIndex,hwPortTotalStatIfName,hwPortTotalStatInPkts,hwPortTotalStatInOctets,hwPortTotalStatInErrors,hwPortTotalStatOutPkts,hwPortTotalStatOutOctets,hwPortTotalStatOutErrors } STATUS current DESCRIPTION "The port total stat object group." ::= { hwPortGroups 31 } hwPortSpeedTrapObjectsGroup OBJECT-GROUP OBJECTS { hwPhysicalPortCurSpeed, hwPhysicalPortLastSpeed } STATUS current DESCRIPTION "The port speed change trap object group" ::= { hwPortGroups 32 } END -- -- HUAWEI-PORT-MIB