LUM-IFOTN-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
        FROM SNMPv2-SMI
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    DateAndTime, DisplayString
        FROM SNMPv2-TC
    lumModules, lumIfOtnMIB
        FROM LUM-REG
    SignalStatusWithNA, FaultStatusWithNA, MgmtNameString, Unsigned32WithNA,
    TruthValueWithNA, CommandString
        FROM LUM-TC;

lumIfOtnMIBModule MODULE-IDENTITY
    LAST-UPDATED
        "201904030000Z" -- June 28th 2019
    ORGANIZATION
        "Infinera Corporation"
    CONTACT-INFO
        "techsupport@infinera.com"
    DESCRIPTION
        "The MIB module for management of otn parameters on objects.
        Notice! The SM, TCM and PM sections are described in
        LUM-IFSMTCMPM-MIB.txt

        This module describes the otn layer in ITU-T Recommendation
        G.709.

        The references refers to the following:
        G.709/Y.1331 (03/2003)
        G.798 (06/2004)
        G.806 (03/2006)

        The tables contained in this MIB are:

        (1) The General group contains some general attributes as time stamps
            and tables sizes.

        (2) The optical channel transport unit (otu) group contains infor-
            mation and configuration for the Otu layer objects.

        (3) The optical channel data unit (odu) group contains information
            and configuration for the Odu layer objects.

        (4) The optical channel payload unit (opu) group contains information
            and configuration for the Opu layer objects.

        (5) The tributary port (tp) group contains information
            and configuration for the tributary port.

"
    REVISION
        "201904030000Z" -- June 28th 2019
        DESCRIPTION
            "Changes made for release r33.0:
             - Added ifOtnTpNotAvailableForUse"
    REVISION
        "201806290000Z" -- June 29th 2018
    DESCRIPTION
        "Changes made for release r31.0:
         - Added mxp200gotn board
         - Added ifOtnOpuConnOduIndex
         - Added ifOtnOduType value odu2e"
    REVISION
        "201712150000Z" -- December 15th 2017
    DESCRIPTION
        "Changes made for release r30.0:
         - Complience table corrected"
    REVISION
        "201706150000Z" -- June 15th 2017
    DESCRIPTION
        "Changes made for release r29.0:
         - Changed ORGANIZATION and CONTACT-INFO"
    REVISION
        "201611300000Z" -- November 30th 2016
    DESCRIPTION
        "Changes made for release r28:
        - Added tp100gotnii board."
    REVISION
        "201501230000Z" -- January 23rd 2015
    DESCRIPTION
        "Changes made for release r24:
        - Added Rx CMI (generic AIS) alarm."
    REVISION
        "201409300000Z" -- September 30th 2014
    DESCRIPTION
        "Changes made for release r23.1:
        - Added mxp100gotn board.
        - Added LOOMFI alarm."
    REVISION
        "201405160000Z" -- May 16th 2014
    DESCRIPTION
        "Changes made for release r23:
        - Changed board name from tp10gotn to tphex10gotn."
    REVISION
        "201311150000Z" -- November 15th 2013
    DESCRIPTION
        "Changes made for release r22:
        - Removed fecType completely to be compliant with R21.
        - Added tp10gotn, tp100gotn board."
    REVISION
        "201305010000Z" -- May 1st 2013
    DESCRIPTION
        "The initial revision of this module."
    ::= { lumModules 50 }


-- ----------------------------------------------------
-- Compliance area, containing groups and compliance
-- specifications.
-- ----------------------------------------------------

lumIfOtnConfs OBJECT IDENTIFIER ::= { lumIfOtnMIB 1 }
lumIfOtnGroups OBJECT IDENTIFIER ::= { lumIfOtnConfs 1 }
lumIfOtnCompl OBJECT IDENTIFIER ::= { lumIfOtnConfs 2 }


-- ----------------------------------------------------
-- Root for objects in the IFOTN MIB
-- ----------------------------------------------------

lumIfOtnMIBObjects OBJECT IDENTIFIER ::= { lumIfOtnMIB 2 }


-- ----------------------------------------------------
-- This MIB contains the following groups:
-- ----------------------------------------------------

ifOtnGeneral OBJECT IDENTIFIER ::= { lumIfOtnMIBObjects 1 }
ifOtnOtuList OBJECT IDENTIFIER ::= { lumIfOtnMIBObjects 2 }
ifOtnOduList OBJECT IDENTIFIER ::= { lumIfOtnMIBObjects 3 }
ifOtnOpuList OBJECT IDENTIFIER ::= { lumIfOtnMIBObjects 4 }
ifOtnTpList OBJECT IDENTIFIER ::= { lumIfOtnMIBObjects 5 }

-- ----------------------------------------------------
-- General group
-- ----------------------------------------------------

ifOtnGeneralConfigLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the configuration of the MIB was
        last changed.

"
    ::= { ifOtnGeneral 1 }

ifOtnGeneralStateLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the state and/or configuration of the
	MIB was last changed.

"
    ::= { ifOtnGeneral 2 }

ifOtnGeneralIfOtnOtuTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Size of otn otu table.

"
    ::= { ifOtnGeneral 3 }

ifOtnGeneralIfOtnOtuConfigLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the configuration of the table was
        last changed.

"
    ::= { ifOtnGeneral 4 }

ifOtnGeneralIfOtnOtuStateLastChangeTime OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The time when the state and/or configuration of the
       table was last changed.

"
   ::= { ifOtnGeneral 5 }

ifOtnGeneralIfOtnOduTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Size of otn odu table

"
    ::= { ifOtnGeneral 6 }

ifOtnGeneralIfOtnOduConfigLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the configuration of the table was
        last changed.

"
    ::= { ifOtnGeneral 7 }

ifOtnGeneralIfOtnOduStateLastChangeTime OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The time when the state and/or configuration of the
       MIB was last changed.

"
   ::= { ifOtnGeneral 8 }

ifOtnGeneralIfOtnOpuTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Size of otn opu table

"
    ::= { ifOtnGeneral 9 }

ifOtnGeneralIfOtnOpuConfigLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the configuration of the table was
        last changed.

"
    ::= { ifOtnGeneral 10 }

ifOtnGeneralIfOtnOpuStateLastChangeTime OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The time when the state and/or configuration of the
       MIB was last changed.

"
   ::= { ifOtnGeneral 11 }

ifOtnGeneralIfOtnTpTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Size of otn Tp table

"
    ::= { ifOtnGeneral 12 }

ifOtnGeneralIfOtnTpConfigLastChangeTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time when the configuration of the table was
        last changed.

"
    ::= { ifOtnGeneral 13 }

ifOtnGeneralIfOtnTpStateLastChangeTime OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The time when the state and/or configuration of the
       MIB was last changed.

"
   ::= { ifOtnGeneral 14 }

-- ----------------------------------------------------
-- Otu group
-- ----------------------------------------------------

ifOtnOtuTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IfOtnOtuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The optical channel transport unit (otu) group contains infor-
         mation and configuration for the Otu layer objects."

    ::= { ifOtnOtuList 1 }

ifOtnOtuEntry OBJECT-TYPE
    SYNTAX      IfOtnOtuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the ifOtn otu list.

"
    INDEX { ifOtnOtuIndex }
    ::= { ifOtnOtuTable 1 }

IfOtnOtuEntry ::=
    SEQUENCE {
        ifOtnOtuIndex                              Unsigned32,
        ifOtnOtuName                               MgmtNameString,
        ifOtnOtuConnIfBasicIfIndex                 Unsigned32WithNA,
        ifOtnOtuTxSignalStatus                     SignalStatusWithNA,
        ifOtnOtuRxSignalStatus                     SignalStatusWithNA,
        ifOtnOtuLossOfFrame                        FaultStatusWithNA,
        ifOtnOtuRxAlarmIndicationSignal            FaultStatusWithNA,
        ifOtnOtuLossOfMultiframe                   FaultStatusWithNA,
        ifOtnOtuUpPortId                           Integer32}

ifOtnOtuIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index assigned to each entry.

"
    ::= { ifOtnOtuEntry 1 }

ifOtnOtuName OBJECT-TYPE
    SYNTAX      MgmtNameString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The management name of the otn otu, for example 'otu:1:2:1-2',
        where the first number indicates subrack, the second slot
        number and the third/fourth are the physical port numbers.

"
    ::= { ifOtnOtuEntry 2 }

ifOtnOtuConnIfBasicIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in ifBasicIf table
        this object is related.

"
    ::= { ifOtnOtuEntry 3 }

ifOtnOtuTxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for outgoing (TX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOtuEntry 4 }

ifOtnOtuRxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for incoming (RX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOtuEntry 5 }

ifOtnOtuLossOfFrame OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Loss of frame (LOF).

        Reference: 6.2.5.1 G.798

        alarm: An OTU frame cannot be located.

        ok: An OTU frame can be located.

"
    ::= { ifOtnOtuEntry 6 }

ifOtnOtuRxAlarmIndicationSignal OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rx Alarm indication signal (AIS).

        Indicates if alarm indication signal (AIS) alarm
         exists or not in receiving direction.

        Reference: 16.4 G.709, 6.2, 6.3.3 G.798

        alarm: An AIS in OTU signal is detected.

        ok: AIS inactive.

"
    ::= { ifOtnOtuEntry 7 }

ifOtnOtuLossOfMultiframe OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Loss of multiframe (LOM).

         Indicates loss of multiframe.

         Reference: 6.2.5.2 G.798

        A: Loss of multiframe is active.

        D: Loss of multiframe inactive.

"
    ::= { ifOtnOtuEntry 8 }

ifOtnOtuUpPortId OBJECT-TYPE
        SYNTAX      Integer32   (-1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
        "Internal port reference for traffic unit.
"
        DEFVAL { -1  }
    ::= { ifOtnOtuEntry 9 }

-- ----------------------------------------------------
-- Otn odu group
-- ----------------------------------------------------

ifOtnOduTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IfOtnOduEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The optical channel data unit (odu) group contains information
         and configuration for the Odu layer objects."

    ::= { ifOtnOduList 1 }

ifOtnOduEntry OBJECT-TYPE
    SYNTAX      IfOtnOduEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the ifOtn odu list.

"
    INDEX { ifOtnOduIndex }
    ::= { ifOtnOduTable 1 }

IfOtnOduEntry ::=
    SEQUENCE {
        ifOtnOduIndex                              Unsigned32,
        ifOtnOduName                               MgmtNameString,
        ifOtnOduConnIfBasicIfIndex                 Unsigned32WithNA,
        ifOtnOduGcc1Terminated                     TruthValueWithNA,
        ifOtnOduGcc2Terminated                     TruthValueWithNA,
        ifOtnOduUsedTcms                           Unsigned32WithNA,
        ifOtnOduTxSignalStatus                     SignalStatusWithNA,
        ifOtnOduRxSignalStatus                     SignalStatusWithNA,
        ifOtnOduType                               INTEGER,
        ifOtnOduParentOduIndex                     Unsigned32WithNA }

ifOtnOduIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index assigned to each entry.

"
    ::= { ifOtnOduEntry 1 }

ifOtnOduName OBJECT-TYPE
    SYNTAX      MgmtNameString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The management name of the otn odu, for example 'odu:1:2:1-2',
        where the first number indicates subrack, the second slot
        number and the third/fourth are the physical port numbers.

"
    ::= { ifOtnOduEntry 2 }

ifOtnOduConnIfBasicIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in ifBasicIf table
        this object is related.

"
    ::= { ifOtnOduEntry 3 }

ifOtnOduGcc1Terminated OBJECT-TYPE
    SYNTAX      TruthValueWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set if GCC1 should be terminated or not.

        true - GCC1 should be terminated

        false - GCC1 should not be terminated

"
    DEFVAL { false }
    ::= { ifOtnOduEntry 4 }

ifOtnOduGcc2Terminated OBJECT-TYPE
    SYNTAX      TruthValueWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set if GCC2 should be terminated or not.

        true - GCC2 should be terminated

        false - GCC2 should not be terminated

"
    DEFVAL { false }
    ::= { ifOtnOduEntry 5 }

ifOtnOduUsedTcms OBJECT-TYPE
    SYNTAX       Unsigned32WithNA
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This attribute indicates which ODU related TCMs
        that has been created.

        This is a bit-mask, where
             0x00000000 means No TCM
             0x00000001 means tcm1
             0x00000010 means tcm2
             ...
             0x00100000 means tcm6
             ...
             0x00100010 means tcm2 + tcm6
             ...
             0x00111111 means all tcms i.e. tcm1 ..tcm6
"
    DEFVAL { 0 }
    ::= { ifOtnOduEntry 6 }

ifOtnOduTxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for outgoing (TX) signal
        of the interface. This is reflecting
        the signalStatus of the OTN PM object
        and any terminated TCMs.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOduEntry 7 }

ifOtnOduRxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for outgoing (RX) signal
        of the interface. This is reflecting
        the signalStatus of the OTN PM object
        and any terminated TCMs.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOduEntry 8 }

ifOtnOduType OBJECT-TYPE
    SYNTAX INTEGER {
        unused (1),
        odu0 (2),
        odu1 (3),
        odu2 (4),
        odu3 (5),
        odu4 (6),
        oduFlex (7),
        oduJ2 (8),
        odu2e (9),
        notApplicable (2147483647)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The odu type.

"
    DEFVAL { unused }
    ::= { ifOtnOduEntry 9 }

ifOtnOduParentOduIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in ifOtnOduIf table
        this SubOdu object is related.

"
        DEFVAL { 2147483647 }
    ::= { ifOtnOduEntry 10 }

-- ----------------------------------------------------
-- Otn opu group
-- ----------------------------------------------------

ifOtnOpuTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IfOtnOpuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The optical channel payload unit (opu) group contains information
         and configuration for the Opu layer objects."

    ::= { ifOtnOpuList 1 }

ifOtnOpuEntry OBJECT-TYPE
    SYNTAX      IfOtnOpuEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the ifOtn opu list.

"
    INDEX { ifOtnOpuIndex }
    ::= { ifOtnOpuTable 1 }

IfOtnOpuEntry ::=
    SEQUENCE {
        ifOtnOpuIndex                          Unsigned32,
        ifOtnOpuName                           MgmtNameString,
        ifOtnOpuConnIfBasicIfIndex             Unsigned32WithNA,
        ifOtnOpuTxSignalStatus                 SignalStatusWithNA,
        ifOtnOpuRxSignalStatus                 SignalStatusWithNA,
        ifOtnOpuTxClientMaintenanceIndication  FaultStatusWithNA,
        ifOtnOpuTxClientSignalFail             FaultStatusWithNA,
        ifOtnOpuRxPayloadMismatch              FaultStatusWithNA,
        ifOtnOpuTxPayloadMismatch              FaultStatusWithNA,
        ifOtnOpuLossOfOpuMultiFrameIdentifier  FaultStatusWithNA,
        ifOtnOpuRxClientMaintenanceIndication  FaultStatusWithNA,
        ifOtnOpuConnOduIndex                   Unsigned32WithNA}

ifOtnOpuIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index assigned to each entry.

"
    ::= { ifOtnOpuEntry 1 }

ifOtnOpuName OBJECT-TYPE
    SYNTAX      MgmtNameString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The management name of the otn opu, for example 'opu:1:2:1-2',
        where the first number indicates subrack, the second slot
        number and the third/fourth are the physical port numbers.

"
    ::= { ifOtnOpuEntry 2 }

ifOtnOpuConnIfBasicIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in ifBasicIf table
         this object is related.

"
    ::= { ifOtnOpuEntry 3 }

ifOtnOpuTxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for outgoing (TX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOpuEntry 4 }

ifOtnOpuRxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for incoming (RX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnOpuEntry 5 }

ifOtnOpuTxClientMaintenanceIndication OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tx generic alarm indication signal (generic AIS).

        Indicates if client maintenance signal (PN11)
        exists or not.

        alarm: A client maintenance signal is active.

        ok: Client maintenance signal inactive.

        Reference: 16.6.1 G.709/Y.1331

"
    ::= { ifOtnOpuEntry 6 }

ifOtnOpuTxClientSignalFail OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tx Client signal fail (CSF).

        Indicates if insignal in remote end is failed or not.

        alarm: Remote end client is faulty.

        ok: Remote end client is OK.

        Reference: 17.1 G.709/Y.1331

"
    ::= { ifOtnOpuEntry 7 }

ifOtnOpuRxPayloadMismatch OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rx Payload mismatch (PLM).

        Monitored overhead: OPUk-PLM

        Direction: Received from the associated physical interface and, unless the ODUk is terminated,
                   the PLM is sent towards the board-internal G.805 Matrix.

        Reference 6.2.4.1 G.798

        Values:
        alarm: The OPUk-PLM overhead is declared as active if the incoming payload type is not equal to the expected payload type(s).

        ok: The OPUk-PLM overhead is declared as inactive if the incoming payload type is equal to the expected payload type(s).

"
    ::= { ifOtnOpuEntry 8 }

ifOtnOpuTxPayloadMismatch OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tx Payload mismatch (PLM).

        Monitored overhead: OPUk-PLM

        Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface.

        Reference 6.2.4.1 G.798

        Values:
        alarm: The OPUk-PLM overhead is declared as active if the incoming payload type is not equal to the expected payload type(s).

        ok: The OPUk-PLM overhead is declared as inactive if the incoming payload type is equal to the expected payload type(s)

"
    ::= { ifOtnOpuEntry 9 }

ifOtnOpuLossOfOpuMultiFrameIdentifier OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rx Loss of OPU Multi-frame identifier (LOOMFI).

        Monitored overhead: OPU4 Multi-Frame Identifier

        Direction: OPU4 Rx. If the expected 80-frame identifier goes out of
        expected sequence for a period of > 3 ms, LOOMFI is declared.

        Reference: 14.3.10.2 G.798

        Values:
        alarm: The OPU Multi-frame identifier is lost.

        ok: The OPU Multi-frame identifier is present.

"
    ::= { ifOtnOpuEntry 10 }

ifOtnOpuRxClientMaintenanceIndication OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rx generic alarm indication signal (generic AIS).

        Indicates if client maintenance signal (PN11)
        exists or not.

        alarm: A client maintenance signal is active.

        ok: Client maintenance signal inactive.

        Reference: 16.6.1 G.709/Y.1331

"
    ::= { ifOtnOpuEntry 11 }

ifOtnOpuConnOduIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in Odu table
         this object is related.

"
    ::= { ifOtnOpuEntry 12 }

-- ----------------------------------------------------
-- Otn tp group
-- ----------------------------------------------------

ifOtnTpTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IfOtnTpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The optical channel payload unit (tp) group contains information
         and configuration for the Tp layer objects."

    ::= { ifOtnTpList 1 }

ifOtnTpEntry OBJECT-TYPE
    SYNTAX      IfOtnTpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the ifOtn tp list.

"
    INDEX { ifOtnTpIndex }
    ::= { ifOtnTpTable 1 }

IfOtnTpEntry ::=
    SEQUENCE {
        ifOtnTpIndex                                        Unsigned32,
        ifOtnTpName                                         MgmtNameString,
        ifOtnTpConnIfBasicIfIndex                           Unsigned32WithNA,
        ifOtnTpUsedTribSlots                                Unsigned32WithNA,
        ifOtnTpTribPortId                                   Unsigned32WithNA,
        ifOtnTpRxMultiplexStructureIdentifierMismatch       FaultStatusWithNA,
        ifOtnTpTxSignalStatus                               SignalStatusWithNA,
        ifOtnTpRxSignalStatus                               SignalStatusWithNA,
        ifOtnTpXcRefOduIndex                                Unsigned32WithNA,
        ifOtnTpTribSlotMask                                 DisplayString,
        ifOtnTpTribSlotView                                 DisplayString,
        ifOtnTpNotAvailableForUse                           TruthValueWithNA}

ifOtnTpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index assigned to each entry.

"
    ::= { ifOtnTpEntry 1 }

ifOtnTpName OBJECT-TYPE
    SYNTAX      MgmtNameString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The management name of the otn tp, for example 'tp:1:2:1',
        where the first number indicates subrack, the second slot
        number and the third is the tributary port number.

"
    ::= { ifOtnTpEntry 2 }

ifOtnTpConnIfBasicIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in the ifBasicIf table
        this object is related.

"
    ::= { ifOtnTpEntry 3 }

ifOtnTpUsedTribSlots OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of tributary slots occupied by this tributary port

"
    ::= { ifOtnTpEntry 4 }

ifOtnTpTribPortId OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Tributary port id.

"
    DEFVAL { 2147483647 }
    ::= { ifOtnTpEntry 5 }

ifOtnTpRxMultiplexStructureIdentifierMismatch OBJECT-TYPE
    SYNTAX      FaultStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Rx Multiplex structure identifier mismatch (MSIM).

        Indicates received MSI is not equal to expected MSI.

        alarm: The MSIM shall be declared for the ODU tributary port
               if the received MSI is not equal to the expected MSI.

        ok: MSIM shall be cleared if the received MSI is equal to the
            expected MSI.

        reference 19.4.1 G709, 6.2.9.1 G.798

"
    ::= { ifOtnTpEntry 6 }

ifOtnTpTxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for outgoing (TX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnTpEntry 7 }

ifOtnTpRxSignalStatus OBJECT-TYPE
    SYNTAX      SignalStatusWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The state for incoming (RX) signal
        of the interface.

        down - A major fault has occurred.

        degraded - The signal quality is impaired.

        up - The signal is OK.

"
    ::= { ifOtnTpEntry 8 }

ifOtnTpXcRefOduIndex OBJECT-TYPE
    SYNTAX      Unsigned32WithNA
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "An index that describes to which index in ifOtnOduIf table
        this TP object is contained in.

"
        DEFVAL { 2147483647 }
    ::= { ifOtnTpEntry 9 }

ifOtnTpTribSlotMask OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Tributary slot mask string

         Format:
         '<bit-mask>'

"
    DEFVAL { "" }
    ::= { ifOtnTpEntry 10 }

ifOtnTpTribSlotView OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Tributary slots

"
    DEFVAL { "" }
    ::= { ifOtnTpEntry 11 }

ifOtnTpNotAvailableForUse OBJECT-TYPE
    SYNTAX      TruthValueWithNA
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ifOtnTpTable is statically populated with entries
         that may or may not be available for use depending on
         other configuration items.
         This attribute states whether the tributary port object
         is actually possible to allocate or not.

         TRUE  => Not possible to allocate.

         FALSE => Can be allocated.

"

    DEFVAL { notApplicable }
    ::= { ifOtnTpEntry 12 }

-- ----------------------------------------------------
-- Notifications
-- ----------------------------------------------------

-- ----------------------------------------------------
-- Object and event groups
-- ----------------------------------------------------

ifOtnGeneralGroupV1 OBJECT-GROUP
    OBJECTS {
        ifOtnGeneralConfigLastChangeTime,
        ifOtnGeneralStateLastChangeTime,
        ifOtnGeneralIfOtnOtuTableSize,
        ifOtnGeneralIfOtnOtuConfigLastChangeTime,
        ifOtnGeneralIfOtnOtuStateLastChangeTime,
        ifOtnGeneralIfOtnOduTableSize,
        ifOtnGeneralIfOtnOduConfigLastChangeTime,
        ifOtnGeneralIfOtnOduStateLastChangeTime,
        ifOtnGeneralIfOtnOpuTableSize,
        ifOtnGeneralIfOtnOpuConfigLastChangeTime,
        ifOtnGeneralIfOtnOpuStateLastChangeTime }

    STATUS      deprecated
    DESCRIPTION
        "The general objects."
    ::= { lumIfOtnGroups 1 }

ifOtnOtuGroupV1 OBJECT-GROUP
    OBJECTS {
        ifOtnOtuIndex,
        ifOtnOtuName,
        ifOtnOtuConnIfBasicIfIndex,
        ifOtnOtuTxSignalStatus,
        ifOtnOtuRxSignalStatus,
        ifOtnOtuLossOfFrame,
        ifOtnOtuRxAlarmIndicationSignal,
        ifOtnOtuLossOfMultiframe }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn otu objects (R20.0)."
    ::= { lumIfOtnGroups 2 }

ifOtnOduGroupV1 OBJECT-GROUP
    OBJECTS {
        ifOtnOduIndex,
        ifOtnOduName,
        ifOtnOduConnIfBasicIfIndex,
        ifOtnOduGcc1Terminated,
        ifOtnOduGcc2Terminated,
        ifOtnOduUsedTcms,
        ifOtnOduTxSignalStatus,
        ifOtnOduRxSignalStatus }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn odu objects (R20.0)."
    ::= { lumIfOtnGroups 3 }

ifOtnOpuGroupV1 OBJECT-GROUP
    OBJECTS {
        ifOtnOpuIndex,
        ifOtnOpuName,
        ifOtnOpuConnIfBasicIfIndex,
        ifOtnOpuTxSignalStatus,
        ifOtnOpuRxSignalStatus,
        ifOtnOpuTxClientMaintenanceIndication,
        ifOtnOpuTxClientSignalFail }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn opu objects (R20.0)."
    ::= { lumIfOtnGroups 4 }

ifOtnTpGroupV1 OBJECT-GROUP
    OBJECTS {
        ifOtnTpIndex,
        ifOtnTpName,
        ifOtnTpConnIfBasicIfIndex,
        ifOtnTpUsedTribSlots,
        ifOtnTpTribPortId,
        ifOtnTpRxMultiplexStructureIdentifierMismatch,
        ifOtnTpTxSignalStatus,
        ifOtnTpRxSignalStatus }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn tp objects (R22.0)."
    ::= { lumIfOtnGroups 5 }

ifOtnOpuGroupV2 OBJECT-GROUP
    OBJECTS {
        ifOtnOpuIndex,
        ifOtnOpuName,
        ifOtnOpuConnIfBasicIfIndex,
        ifOtnOpuTxSignalStatus,
        ifOtnOpuRxSignalStatus,
        ifOtnOpuTxClientMaintenanceIndication,
        ifOtnOpuTxClientSignalFail,
        ifOtnOpuRxPayloadMismatch,
        ifOtnOpuTxPayloadMismatch }
   STATUS      deprecated
    DESCRIPTION
        "The ifOtn opu objects (R22.0)."
    ::= { lumIfOtnGroups 6 }

ifOtnOduGroupV2 OBJECT-GROUP
    OBJECTS {
        ifOtnOduIndex,
        ifOtnOduName,
        ifOtnOduConnIfBasicIfIndex,
        ifOtnOduGcc1Terminated,
        ifOtnOduGcc2Terminated,
        ifOtnOduUsedTcms,
        ifOtnOduTxSignalStatus,
        ifOtnOduRxSignalStatus,
        ifOtnOduType,
        ifOtnOduParentOduIndex }

    STATUS      current
    DESCRIPTION
        "The ifOtn odu objects (R22.0)."
    ::= { lumIfOtnGroups 7 }

ifOtnOtuGroupV2 OBJECT-GROUP
    OBJECTS {
        ifOtnOtuIndex,
        ifOtnOtuName,
        ifOtnOtuConnIfBasicIfIndex,
        ifOtnOtuTxSignalStatus,
        ifOtnOtuRxSignalStatus,
        ifOtnOtuLossOfFrame,
        ifOtnOtuRxAlarmIndicationSignal,
        ifOtnOtuLossOfMultiframe }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn otu objects (R22.0)."
    ::= { lumIfOtnGroups 8 }

ifOtnOpuGroupV3 OBJECT-GROUP
    OBJECTS {
        ifOtnOpuIndex,
        ifOtnOpuName,
        ifOtnOpuConnIfBasicIfIndex,
        ifOtnOpuTxSignalStatus,
        ifOtnOpuRxSignalStatus,
        ifOtnOpuTxClientMaintenanceIndication,
        ifOtnOpuTxClientSignalFail,
        ifOtnOpuRxPayloadMismatch,
        ifOtnOpuTxPayloadMismatch,
        ifOtnOpuLossOfOpuMultiFrameIdentifier }
   STATUS      deprecated
   DESCRIPTION
       "The ifOtn opu objects (R23.1)."
   ::= { lumIfOtnGroups 9 }

ifOtnTpGroupV2 OBJECT-GROUP
    OBJECTS {
        ifOtnTpIndex,
        ifOtnTpName,
        ifOtnTpConnIfBasicIfIndex,
        ifOtnTpUsedTribSlots,
        ifOtnTpTribPortId,
        ifOtnTpRxMultiplexStructureIdentifierMismatch,
        ifOtnTpTxSignalStatus,
        ifOtnTpRxSignalStatus,
        ifOtnTpTribSlotMask,
        ifOtnTpTribSlotView }

    STATUS      deprecated
    DESCRIPTION
        "The ifOtn tp objects (R28.0)."
    ::= { lumIfOtnGroups 10 }

ifOtnOtuGroupV3 OBJECT-GROUP
    OBJECTS {
        ifOtnOtuIndex,
        ifOtnOtuName,
        ifOtnOtuConnIfBasicIfIndex,
        ifOtnOtuTxSignalStatus,
        ifOtnOtuRxSignalStatus,
        ifOtnOtuLossOfFrame,
        ifOtnOtuRxAlarmIndicationSignal,
        ifOtnOtuLossOfMultiframe,
        ifOtnOtuUpPortId}

    STATUS      current
    DESCRIPTION
        "The ifOtn otu objects (R28.0)."
    ::= { lumIfOtnGroups 11 }

ifOtnGeneralGroupV2 OBJECT-GROUP
    OBJECTS {
        ifOtnGeneralConfigLastChangeTime,
        ifOtnGeneralStateLastChangeTime,
        ifOtnGeneralIfOtnOtuTableSize,
        ifOtnGeneralIfOtnOtuConfigLastChangeTime,
        ifOtnGeneralIfOtnOtuStateLastChangeTime,
        ifOtnGeneralIfOtnOduTableSize,
        ifOtnGeneralIfOtnOduConfigLastChangeTime,
        ifOtnGeneralIfOtnOduStateLastChangeTime,
        ifOtnGeneralIfOtnOpuTableSize,
        ifOtnGeneralIfOtnOpuConfigLastChangeTime,
        ifOtnGeneralIfOtnOpuStateLastChangeTime,
        ifOtnGeneralIfOtnTpTableSize,
        ifOtnGeneralIfOtnTpConfigLastChangeTime,
        ifOtnGeneralIfOtnTpStateLastChangeTime }
    STATUS      current
    DESCRIPTION
        "The general objects."
    ::= { lumIfOtnGroups 12 }

ifOtnOpuGroupV4 OBJECT-GROUP
    OBJECTS {
        ifOtnOpuIndex,
        ifOtnOpuName,
        ifOtnOpuConnIfBasicIfIndex,
        ifOtnOpuTxSignalStatus,
        ifOtnOpuRxSignalStatus,
        ifOtnOpuTxClientMaintenanceIndication,
        ifOtnOpuTxClientSignalFail,
        ifOtnOpuRxPayloadMismatch,
        ifOtnOpuTxPayloadMismatch,
        ifOtnOpuLossOfOpuMultiFrameIdentifier,
        ifOtnOpuConnOduIndex }
   STATUS      current
   DESCRIPTION
       "The ifOtn opu objects (R31.0)."
   ::= { lumIfOtnGroups 13 }

   ifOtnTpGroupV3 OBJECT-GROUP
       OBJECTS {
           ifOtnTpIndex,
           ifOtnTpName,
           ifOtnTpConnIfBasicIfIndex,
           ifOtnTpUsedTribSlots,
           ifOtnTpTribPortId,
           ifOtnTpRxMultiplexStructureIdentifierMismatch,
           ifOtnTpTxSignalStatus,
           ifOtnTpRxSignalStatus,
           ifOtnTpTribSlotMask,
           ifOtnTpTribSlotView,
           ifOtnTpNotAvailableForUse}

       STATUS      current
       DESCRIPTION
           "The ifOtn tp objects (R33.0)."
       ::= { lumIfOtnGroups 14 }

-- ----------------------------------------------------
-- Compliance
-- ----------------------------------------------------

lumIfOtnComplV1 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R20.0)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV1,
            ifOtnOtuGroupV1,
            ifOtnOduGroupV1,
            ifOtnOpuGroupV1 }
    ::= { lumIfOtnCompl 1 }

lumIfOtnComplV2 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R22.0)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV1,
            ifOtnOtuGroupV2,
            ifOtnOduGroupV2,
            ifOtnOpuGroupV2,
            ifOtnTpGroupV1 }
    ::= { lumIfOtnCompl 2 }

lumIfOtnComplV3 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R23.1)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV1,
            ifOtnOtuGroupV2,
            ifOtnOduGroupV2,
            ifOtnOpuGroupV3,
            ifOtnTpGroupV1 }
    ::= { lumIfOtnCompl 3 }

lumIfOtnComplV4 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R28.0)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV1,
            ifOtnOtuGroupV3,
            ifOtnOduGroupV2,
            ifOtnOpuGroupV3,
            ifOtnTpGroupV2 }
    ::= { lumIfOtnCompl 4 }

lumIfOtnComplV5 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R30.0)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV2,
            ifOtnOtuGroupV3,
            ifOtnOduGroupV2,
            ifOtnOpuGroupV3,
            ifOtnTpGroupV2 }
    ::= { lumIfOtnCompl 5 }

lumIfOtnComplV6 MODULE-COMPLIANCE
    STATUS      deprecated
    DESCRIPTION
        "Basic implementation requirements for the ifOtn MIB. (R31.0)"
    MODULE
        MANDATORY-GROUPS {
            ifOtnGeneralGroupV2,
            ifOtnOtuGroupV3,
            ifOtnOduGroupV2,
            ifOtnOpuGroupV4,
            ifOtnTpGroupV2 }
    ::= { lumIfOtnCompl 6 }

    lumIfOtnComplV7 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION
            "Basic implementation requirements for the ifOtn MIB. (R31.0)"
        MODULE
            MANDATORY-GROUPS {
                ifOtnGeneralGroupV2,
                ifOtnOtuGroupV3,
                ifOtnOduGroupV2,
                ifOtnOpuGroupV4,
                ifOtnTpGroupV3 }
        ::= { lumIfOtnCompl 7 }
END