LUM-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, IpAddress FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, DisplayString, TestAndIncr, DateAndTime FROM SNMPv2-TC lumModules, lumSystemMIB FROM LUM-REG CommandString, FaultStatus, EnableDisable, OnOff, Platform FROM LUM-TC; lumSystemMIBModule MODULE-IDENTITY LAST-UPDATED "201903290000Z" -- March 29th 2019 ORGANIZATION "Infinera Corporation" CONTACT-INFO "techsupport@infinera.com" DESCRIPTION "The system MIB. - General - Node parameters - Date and time - License information - RADIUS and TACACS+ authentication configuration - User information " REVISION "201903290000Z" -- March 29th 2019 DESCRIPTION "Changes made for r32.1: - Added sysLoginBanner table" REVISION "201812210000Z" -- Dec 21th 2018 DESCRIPTION "Changes made for r32.0: - Improved the help text for sysSecurityAutoEnableBlockedMgmtPorts - Added sysSecurityInstallCertificates - Added sysSecurityInstallFactoryDefaultCertificates - Added manager table" REVISION "201809280000Z" -- Sept 28th 2018 DESCRIPTION "Changes made for r31.1: - Fix inconsistent use of lower case and upper case in long alias in system-security table" REVISION "201712080000Z" -- Dec 8th 2017 DESCRIPTION "Changes made for release r30.0: - Added sysSecurityCUFrontICNPortAccess sysSecurityChangeCUFrontICNPortAccess sysSecuritySubrackICNPortAccess sysSecurityChangeSubrackICNPortAccess, sysSecurityMgmtAccessProofOfConnStatus, sysSecurityMgmtAccessProofOfConnectivity, sysSecurityAutoEnableBlockedMgmtPorts, sysSecurityBlockedMgmtPortsUnblocked" REVISION "201706150000Z" -- June 15th 2017 DESCRIPTION "Changes made for release r29.0: - Added attribute sysSecurityFileSystemAccessRestrictions - Changed ORGANIZATION and CONTACT-INFO" REVISION "201611300000Z" -- November 30th 2016 DESCRIPTION "Changes made for release r28.0: - Added extra attributes for sysNode group including CLLI (Common Language Location Identifier), FIC (Facility Interface Code), TID (Target ID), Latitude and Longitude." REVISION "201606140000Z" -- Jun 14th 2016 DESCRIPTION "Changes made for release r27: - Added attribute sysSecurityLocalCraftAccess in group Security, to show the access status to the local ETH-Craft port. - Added attribute sysSecurityChangeLocalCraftAccess in group Security to be able to change the access to the local ETH-Craft port on CU-SFP/III boards. - Added attribute sysSecurityAuthenticationOrder in group Security, to show the authentication order currently active in the node. - Remove possibility of setting TACACS and RADIUS configurations via snmp." REVISION "201405160000Z" -- May 16th 2014 DESCRIPTION "Changes made for release r23: - Added attribute sysGeneralWriteTest in group General, to be used when TNM connects - Attribute sysGeneralTest in group General set to deprecated (prev used when TNM connects)" REVISION "201311150000Z" -- November 15th 2013 DESCRIPTION "Description for local console access is improved. Help text for user name improved." REVISION "201008030000Z" -- August 3th 2010 DESCRIPTION "Change local console access and radius port numbers." REVISION "200808050000Z" -- August 5th 2008 DESCRIPTION "Added compliance to indicate web server less vulnerable to hanging." REVISION "200509140000Z" -- September 14th 2005 DESCRIPTION "Added minimal compliance groups." REVISION "200410010000Z" -- October 1st 2004 DESCRIPTION "Added table size variables." REVISION "200406300000Z" -- June 30th 2004 DESCRIPTION "Enabled user group, added wtmp-logging config.." REVISION "200405260000Z" -- May 26th 2004 DESCRIPTION "Added TACACS+ configuration." REVISION "200308030000Z" -- September 3rd 2003 DESCRIPTION "Added command for changing local time." REVISION "200212130000Z" -- December 13th 2002 DESCRIPTION "Added network element type, user name and distinguished name." REVISION "200204180000Z" -- April 18th 2002 DESCRIPTION "Added systemGeneralTest." REVISION "200201110000Z" -- January 11th 2002 DESCRIPTION "Added sysNodeUptime." REVISION "200108140000Z" -- August 14th 2001 DESCRIPTION "Cleaned up some tbd, removed unused definitions. Fixed some defaults. Added sysNodeRunLevel." REVISION "200107260000Z" -- July 26th 2001 DESCRIPTION "Added aliases and compliance groups." REVISION "200104260000Z" -- April 26th 2001 DESCRIPTION "The initial revision of this module." ::= { lumModules 4 } -- ---------------------------------------------------- -- Conformance area, containing groups and complicance -- specifications. -- ---------------------------------------------------- lumSystemConfs OBJECT IDENTIFIER ::= { lumSystemMIB 1 } lumSystemGroups OBJECT IDENTIFIER ::= { lumSystemConfs 1 } lumSystemCompl OBJECT IDENTIFIER ::= { lumSystemConfs 2 } lumSystemMinimalGroups OBJECT IDENTIFIER ::= { lumSystemConfs 3 } lumSystemMinimalCompl OBJECT IDENTIFIER ::= { lumSystemConfs 4 } -- ---------------------------------------------------- -- Root for objects in the system MIB -- ---------------------------------------------------- lumSystemMIBObjects OBJECT IDENTIFIER ::= { lumSystemMIB 2 } -- ---------------------------------------------------- -- This MIB contains the following groups: -- ---------------------------------------------------- sysGeneral OBJECT IDENTIFIER ::= { lumSystemMIBObjects 1 } sysNode OBJECT IDENTIFIER ::= { lumSystemMIBObjects 2 } sysHostList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 3 } sysTime OBJECT IDENTIFIER ::= { lumSystemMIBObjects 4 } sysLogList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 5 } sysUserList OBJECT IDENTIFIER ::= { lumSystemMIBObjects 6 } sysRadius OBJECT IDENTIFIER ::= { lumSystemMIBObjects 7 } sysLicense OBJECT IDENTIFIER ::= { lumSystemMIBObjects 8 } sysTacacs OBJECT IDENTIFIER ::= { lumSystemMIBObjects 9 } sysAudit OBJECT IDENTIFIER ::= { lumSystemMIBObjects 10 } sysSecurity OBJECT IDENTIFIER ::= { lumSystemMIBObjects 11 } sysManager OBJECT IDENTIFIER ::= { lumSystemMIBObjects 12 } sysLoginBanner OBJECT IDENTIFIER ::= { lumSystemMIBObjects 13 } -- ---------------------------------------------------- -- Textual Conventions -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- General group -- ---------------------------------------------------- sysGeneralTestAndIncr OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "Protection against simultaneous access from multiple managers. See SNMPv2-TC. " ::= { sysGeneral 1 } sysGeneralMibSpecVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB specification version. " DEFVAL { "" } ::= { sysGeneral 2 } sysGeneralMibImplVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The MIB implementation version. " DEFVAL { "" } ::= { sysGeneral 3 } sysGeneralLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the state of MIB last changed. " ::= { sysGeneral 4 } sysGeneralTest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Object that can be used to verify write access (via SNMP). This attribute can be written via SNMP. " DEFVAL { 0 } ::= { sysGeneral 5 } sysGeneralConfigLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the configuration of the MIB last changed. " ::= { sysGeneral 6 } sysGeneralLoginRecords OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable login records. The log can be viewed with the 'last' command. off - Login records log disabled. on - Login records log enable. " DEFVAL { off } ::= { sysGeneral 7 } sysGeneralUserTableSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rows available in the user table. " ::= { sysGeneral 8 } sysGeneralWriteTest OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Object that can be used to verify write access (via SNMP). This attribute can be written via SNMP. " DEFVAL { "" } ::= { sysGeneral 9 } -- ---------------------------------------------------- -- Node configuration group -- ---------------------------------------------------- sysNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively-assigned name for this managed node. By convention, this is the nodes fully-qualified domain name. The node name may be composed of the following characters: A to Z ; uppercase characters a to z ; lower case characters 0 to 9 ; numeric characters - ; dash . ; dot, is used as a separator _ ; underscore, supported (but might not be supported by all DNS servers) A host name (label) can start or end with a letter or a number A host name (label) MUST NOT start or end with a '-' (dash) A host name (label) MUST NOT consist of all numeric values A host name (label) can be up to 63 characters " DEFVAL { "localhost.localdomain" } ::= { sysNode 1 } sysNodeContact OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The textual identification of the contact person for this managed node, together with information on how to contact this person. Set to the empty string if not known. Example: 'Joe, e-mail: joe@localhost.localdomain' " DEFVAL { "" } ::= { sysNode 2 } sysNodeLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The physical location of this node. Set to the empty string if not known. Example: 'Rack 5, in the system lab, third floor' " DEFVAL { "" } ::= { sysNode 3 } sysNodeObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The vendors authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what kind of box' is being managed. " ::= { sysNode 4 } sysNodePrimaryNameServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name or IP address of the name server. Set to the empty string if not known. Example: 'dns.localdomain' " DEFVAL { "" } ::= { sysNode 5 } sysNodeRunLevel OBJECT-TYPE SYNTAX INTEGER { undefined (0), halt (1), single (2), normal (3), reboot (4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Note: This attribute is deprecated! Indicates the runlevel of the software. halt - Shutdown the entire node. single - Stop all applications and enter single user mode. normal - Normal operations. reboot - Restart the entire node. tbd: no network? tbd: restart with default configuration " DEFVAL { normal } ::= { sysNode 6 } sysNodeSecondaryNameServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name or IP address of the name server. Set to the empty string if not known. Example: 'dns.lumentis.se', '192.168.1.200' " DEFVAL { "" } ::= { sysNode 7 } sysNodeUptime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The uptime in string format. " ::= { sysNode 8 } sysNodeNeType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable identifier of the type of node. Included in performance measurements reports. " DEFVAL { "" } ::= { sysNode 9 } sysNodeNeUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable network element name. Included in performance measurements reports. " DEFVAL { "" } ::= { sysNode 10 } sysNodeNeDistinguishedName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable network element distinguished name. Included in performance measurements reports. " DEFVAL { "" } ::= { sysNode 11 } sysNodeBootTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Application start time. " ::= { sysNode 12 } sysNodeLocale OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines what rules should be used when formatting and display items that are affected by language and locality. The following is currently affected: Date and time Decimal character Unit used for temperatures If locale is set to US English temperatures are converted to degrees Fahrenheit. Note: Only the default locale, 'C', is supported at the moment. " DEFVAL { "C" } ::= { sysNode 13 } sysNodeVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The build version. " DEFVAL { "" } ::= { sysNode 14 } sysNodeCLLI OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Common Language Location Identifier of NE. Specifies the location and function of telecommunications equipment or of a relevant location such as international border or the location of a supporting equipment, such as a pole or a manhole. " DEFVAL { "" } ::= { sysNode 15 } sysNodeFIC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Frame Identifier Code or Facility Interface Code for NE. FIC identifies the type of interface that the terminal equipment requires for compatible interconnection with wireline carrier facilities. " DEFVAL { "" } ::= { sysNode 16 } sysNodeTID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Target ID of NE. A unique identifier which is a combination of the CLLI and FIC (Location+Frame). " DEFVAL { "" } ::= { sysNode 17 } sysNodeLatitude OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Latitude of the NE. A geographic coordinate ranging from -90 to +90 degree specifying the north-south position of a node on the Earth surface. Decimal Degree Representation is used as the latitude format. " DEFVAL { "" } ::= { sysNode 18 } sysNodeLongitude OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Longitude of the NE. A geographic coordinate ranging from -180 to +180 degree specifying the east-west position of the node on the Earth surface. Decimal Degree Representation is used as the longitude format. " DEFVAL { "" } ::= { sysNode 19 } -- ---------------------------------------------------- -- Host names configuration group -- ---------------------------------------------------- sysHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SysHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The well known host names list. " ::= { sysHostList 1 } sysHostEntry OBJECT-TYPE SYNTAX SysHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in well known host names list. " INDEX { sysHostIndex } ::= { sysHostTable 1 } SysHostEntry ::= SEQUENCE { sysHostIndex Unsigned32, sysHostIpAddress DisplayString, sysHostNames DisplayString, sysHostRowStatus RowStatus } sysHostIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each host entry. " ::= { sysHostEntry 1 } sysHostIpAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of a well known host. Example: '192.168.1.200' " ::= { sysHostEntry 2 } sysHostNames OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name(s) of a well known host. Set to the empty string if not known. Example: 'dns.lumentis.se dns' " ::= { sysHostEntry 3 } sysHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. " ::= { sysHostEntry 4 } -- ---------------------------------------------------- -- Local users configuration group -- ---------------------------------------------------- sysUserTable OBJECT-TYPE SYNTAX SEQUENCE OF SysUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local user list." ::= { sysUserList 1 } sysUserEntry OBJECT-TYPE SYNTAX SysUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the local user list. Prompts for the following when creating a new user: Password for the current user (the user in question or an administrator). New password for the user. New password again. Profile for the new user (default operator). " INDEX { sysUserIndex } ::= { sysUserTable 1 } SysUserEntry ::= SEQUENCE { sysUserIndex Unsigned32, sysUserName DisplayString, sysUserPasswd DisplayString, sysUserDescr DisplayString, sysUserLastChangeTime DateAndTime, sysUserExpireTime DateAndTime, sysUserRowStatus RowStatus, sysUserProfile DisplayString, sysUserUid Unsigned32, sysUserChangePassword CommandString, sysUserClearPassword CommandString, sysUserDisable CommandString, sysUserEnable CommandString, sysUserMode INTEGER } sysUserIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary index assigned to each entry. " ::= { sysUserEntry 1 } sysUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The username must start with a lowercase alphabetical character. The rest of the username should be lowercase letters (a-z), numbers(0-9) or any of the following characters: -._ It is also possible to add $ as the last character. " ::= { sysUserEntry 2 } sysUserPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "tbd description tbd examples " DEFVAL { "1234567890" } ::= { sysUserEntry 3 } sysUserDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User description string. " DEFVAL { "" } ::= { sysUserEntry 4 } sysUserLastChangeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "tbd description tbd examples " ::= { sysUserEntry 5 } sysUserExpireTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "tbd description tbd examples " ::= { sysUserEntry 6 } sysUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. " ::= { sysUserEntry 7 } sysUserProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user authority profile. 'administrator' - No restrictions. 'operator' - Restrictions on user operations and some systems management operations. Otherwise read/write access. 'readonly' - Read only access. " DEFVAL { "operator" } ::= { sysUserEntry 8 } sysUserUid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "User id. " ::= { sysUserEntry 9 } sysUserChangePassword OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Change user password. Permitted for the the user in question and administrators. Asks for the following: User database to update, Local or TACACS. The system supports update of either the local password or the TACACS password on a remote server. This choice is seen only when applicable. Password for the current user (the user in question or an administrator). New password for the user. New password again. Password can consist of any printable ASCII character except for '&' and whitespace. There are no restrictions on upper or lower case characters. Password length: 1 - 40 character(s). Default password is set when new user is created. " DEFVAL { "1234567890" } ::= { sysUserEntry 10 } sysUserClearPassword OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the user password. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only changes the local password. If a RADIUS- or TACACS+-server is in use they may override the local configuration. " ::= { sysUserEntry 11 } sysUserDisable OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Disable the user. Clear or set the password to make the user available again. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only disables the user locally. If a RADIUS- or TACACS+-server is in use they may override the local configuration. " ::= { sysUserEntry 12 } sysUserEnable OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the user. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only enables the user locally. If a RADIUS- or TACACS+-server is in use they may override the local configuration. " ::= { sysUserEntry 13 } sysUserMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative status for the user. Note: Only shows the local user configuration. If a RADIUS- or TACACS+-server is in use they may override the local configuration. " DEFVAL { enabled } ::= { sysUserEntry 14 } -- ---------------------------------------------------- -- Date and time group -- ---------------------------------------------------- sysTimeLocal OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The local date and time. " ::= { sysTime 1 } sysTimeZone OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the time zone in which node is located. A few examples: 'CET' 'EET' 'Europe/Stockholm' 'Europe/London' 'Europe/Copenhagen' 'Europe/Berlin' 'America/Chicago' 'America/Kentucky/Louisville' 'Asia/Tokyo' Note: The notation used for naming the timezones where the offset to Coordinated Universal Time (UTC) is explicitly included, i.e. 'GMT-2', may be confusing. The offset indicates the time value to be added to the local time to get UTC. This means that the the offset is positive for timezones west of UTC and and negative east of UTC. This is the opposite of how timezones are often described. For example standard time in Sweden is 'GMT-1'. On timezone maps zones east of UTC are often given a positive offset so that the very same zone is called 'GMT+1'. This attribute can be written via SNMP. " DEFVAL { "CET" } ::= { sysTime 2 } sysTimePrimaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The IP address of the primary SNTP/NTP server. Set to the 0.0.0.0 or empty string if not used. Example: '192.36.143.150' (time1.stupi.se) " ::= { sysTime 3 } sysTimeSecondaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The IP address of the secondary SNTP/NTP server. Set to the 0.0.0.0 or empty string if not used. Example: '192.36.143.151' (time2.stupi.se) " DEFVAL { "" } ::= { sysTime 4 } sysTimeChangeLocalTime OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-write STATUS current DESCRIPTION "Change the local date and time. Year - If no century is input the current century is set by default. Month - 1 to 12 Day - 1 to 31 Hour - 0 to 23 Minute - 0 to 59 Second - 0 to 59 Note: Setting of the local time is disabled if either the primary or secondary time server is set. " ::= { sysTime 5 } sysTimePrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the primary SNTP/NTP server. Set to 0.0.0.0 if not used. Example: '192.36.143.150' (time1.stupi.se) This attribute can be written via SNMP. " DEFVAL { "0.0.0.0" } ::= { sysTime 6 } sysTimeSecondaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the primary SNTP/NTP server. Set to 0.0.0.0 if not used. Example: '192.36.143.150' (time1.stupi.se) This attribute can be written via SNMP. " DEFVAL { "0.0.0.0" } ::= { sysTime 7 } -- ---------------------------------------------------- -- Syslog configuration directives group -- ---------------------------------------------------- sysLogTable OBJECT-TYPE SYNTAX SEQUENCE OF SysLogEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The syslog configuration directives list. " ::= { sysLogList 1 } sysLogEntry OBJECT-TYPE SYNTAX SysLogEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the syslog configuration directives list. " INDEX { sysLogIndex } ::= { sysLogTable 1 } SysLogEntry ::= SEQUENCE { sysLogIndex Unsigned32, sysLogSelection DisplayString, sysLogAction DisplayString, sysLogRowStatus RowStatus } sysLogIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An arbitrary index assigned to each syslog configuration directive. " ::= { sysLogEntry 1 } sysLogSelection OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "tbd description tbd examples " ::= { sysLogEntry 2 } sysLogAction OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "tbd description tbd examples " ::= { sysLogEntry 3 } sysLogRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Manages creation and deletion of conceptual rows. See also SNMPv2-TC. " ::= { sysLogEntry 4 } -- ---------------------------------------------------- -- Radius group -- ---------------------------------------------------- sysRadiusPrimaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address for the primary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. If either the server or the secret are not set the primary server is disabled. " DEFVAL { "" } ::= { sysRadius 1 } sysRadiusPrimarySecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The shared secret for the primary RADIUS-server. Set to empty string if not used. If either the server or the secret are not set the primary server is disabled. " DEFVAL { "1234567890" } ::= { sysRadius 2 } sysRadiusSecondaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address for the secondary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. If either the server or the secret are not set the secondary server is disabled. " DEFVAL { "" } ::= { sysRadius 3 } sysRadiusSecondarySecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The shared secret for the secondary RADIUS-server. Set to empty string if not used. If either the server or the secret are not set the secondary server is disabled. " DEFVAL { "1234567890" } ::= { sysRadius 4 } sysRadiusPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the primary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to 0.0.0.0 if not used. If either the server or the secret are not set the primary server is disabled. " DEFVAL { "0.0.0.0" } ::= { sysRadius 5 } sysRadiusSecondaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the secondary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to 0.0.0.0 if not used. If either the server or the secret are not set the primary server is disabled. " DEFVAL { "0.0.0.0" } ::= { sysRadius 6 } sysRadiusPrimaryPort OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number for the primary RADIUS server. " DEFVAL { 1812 } ::= { sysRadius 7 } sysRadiusSecondaryPort OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number used for the Secondary RADIUS server. " DEFVAL { 1812 } ::= { sysRadius 8 } sysRadiusDefaultUserProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user authority profile. 'administrator' - No restrictions. 'operator' - Restrictions on user operations and some systems management operations. Otherwise read/write access. 'readonly' - Read only access. 'no radius template' - The user 'radius' is used as template. It should be created if RADIUS server is used. Otherwise both primary and secondary servers are disabled. " ::= { sysRadius 9 } -- ---------------------------------------------------- -- License group -- ---------------------------------------------------- sysLicenseExpireDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the date when the license will expire. " ::= { sysLicense 1 } sysLicenseCustomer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the name of the customer that holds the license. " ::= { sysLicense 2 } sysLicenseExpiresSoon OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Warns that the license will expire in 7 days, or less. " ::= { sysLicense 3 } sysLicenseExpired OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the license has expired, or the license file is missing. " ::= { sysLicense 4 } sysLicenseExpiredCause OBJECT-TYPE SYNTAX INTEGER { none (0), missing (1), invalid (2), corrupt (3), expired (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes why the license expired alarm is raised. none - file is ok, no alarm. missing - the license file is missing. invalid - it is not a valid XML file, or some tags are missing. corrupt - the encryption key does not match the content of the file. expired - the license has expired. " ::= { sysLicense 5 } sysLicenseFeatureEws OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), demo (3), corrupt (4), expired (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - the feature ENM can not be used. enabled - the feature ENM can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. " ::= { sysLicense 6 } sysLicenseFeatureOspf OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), demo (3), corrupt (4), expired (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - the feature OSPF can not be used. enabled - the feature OSPF can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. " ::= { sysLicense 7 } sysLicenseFeatureSnmp OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), demo (3), corrupt (4), expired (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - the feature SNMP can not be used. enabled - the feature SNMP can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. " ::= { sysLicense 8 } sysLicenseFeatureGmpls OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), demo (3), corrupt (4), expired (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - the feature GMPLS can not be used. enabled - the feature GMPLS can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. " ::= { sysLicense 9 } sysLicenseFeatureRudb OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), demo (3), corrupt (4), expired (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - the feature RUDB can not be used. enabled - the feature RUDB can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. RUDB means 'remote used database' and include TACACS and RADIUS. " ::= { sysLicense 10 } sysLicenseInstallLicenseFile OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Install a new license file. The license file can either be fetched from a remote server or installed from local directory. There are 3 cases: 1. Remote server. Give server addr and full path installLicenseFile / installLicenseFile 192.168.10.27/tftp/license.xml 2. From a local directory installLicenseFile installLicenseFile /root/license.xml 3. From the local download directory /tftpboot/downloaded installLicenseFile installLicenseFile license.xml Regardless of the name of the file it will be installed as /etc/lumentis/license.xml " ::= { sysLicense 11 } -- ---------------------------------------------------- -- Tacacs group -- ---------------------------------------------------- sysTacacsPrimaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address for the primary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. " DEFVAL { "" } ::= { sysTacacs 1 } sysTacacsSecondaryServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address for the secondary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. " DEFVAL { "" } ::= { sysTacacs 2 } sysTacacsSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The shared secret for the primary TACACS+-server. Set to empty string if not used. " DEFVAL { "1234567890" } ::= { sysTacacs 3 } sysTacacsSecondarySecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The shared secret for the secondary TACACS+-server. Set to empty string if not used. " DEFVAL { "1234567890" } ::= { sysTacacs 4 } sysTacacsPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the primary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to 0.0.0.0 if not used. " DEFVAL { "0.0.0.0" } ::= { sysTacacs 5 } sysTacacsSecondaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the secondary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to 0.0.0.0 if not used. " DEFVAL { "0.0.0.0" } ::= { sysTacacs 6 } -- ---------------------------------------------------- -- Security group -- ---------------------------------------------------- sysSecurityLocalConsoleAccess OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2), bootdisabled (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "When this parameter is 'disabled' there is no way to access the board via RS-232. Note, the setting applies to all boards in all chassis. enabled - Access is allowed disabled - No access is allowed. The boot monitor and LINUX login are blocked. bootdisabled - The boot monitor is blocked while LINUX login is allowed. Only administrator can change the local console access settings. " DEFVAL { enabled } ::= { sysSecurity 1 } sysSecurityChangeLocalConsoleAccess OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to change 'Local Console Access' " ::= { sysSecurity 2 } sysSecurityIpTablesStatus OBJECT-TYPE SYNTAX INTEGER { unavailable (1), unsecure (2), secure (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter shows if a system function is enabled in the node. unavailable - package not installed unsecure - package installed but not in use secure - package installed and in use " DEFVAL { unavailable } ::= { sysSecurity 3 } sysSecurityLocalCraftAccess OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "The local craft ETH access is used for connecting a PC which runs DHCP (Dynamic Host Control Protocol) for accessing the web (GUI) interface. Use lc in the address bar of the browser. The IP address of the DCN also works. When this parameter is 'disabled' there is no way to access the board via Craft ETH port. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the local craft ETH access settings. The Local Craft ETH runs in 1000Base-T mode (1G Eth) or lower speed depending on the auto negotiation. " DEFVAL { enabled } ::= { sysSecurity 4 } sysSecurityChangeLocalCraftAccess OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to change 'Local Craft ETH Access' " ::= { sysSecurity 5 } sysSecurityAuthenticationOrder OBJECT-TYPE SYNTAX INTEGER { localFirst (1), remoteFirst (2), strictRemoteFirst (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter shows the authentication order which is used by the system. localFirst - First authenticate with respect to local user database. If it fails, try remote server(s). If no remote servers are configured, the authentication will be Local-Only. remoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database. If the remote authentication is denied, try the local user database. strictRemoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database. If the remote authentication is denied, stop, access is denied. Only administrator can change the authenticate order settings. " DEFVAL { strictRemoteFirst } ::= { sysSecurity 6 } sysSecurityFileSystemAccessRestrictions OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Access rights to the file system of the node element. When 'restricted', restrictions to the file system are activated, these restrictions depends on the user authority profile. disabled - Default access rights: 1. Administrators (including root) and operators can execute CLI commands bash and telnet. 2. All users have full file system access using SFTP or FTP (if enabled). enabled - Restricted access rights to the file system. The following restrictions are applied: 1. Only administrator users (including root) can execute CLI commands bash and telnet. 2. When using SFTP: Readonly and operator users can only access /tftpboot/ and its subdirectories. Administrator users (including root) have full file system access. 3. When using FTP (if enabled): Readonly, operator and all administrator users except root can only access /tftpboot/ and its subdirectories. The root user have full file system access. When changed, the updated restrictions will be used at following FTP/SFTP sessions. On CU-SFP/III, active FTP sessions will be aborted at the point when file system access is changed. Only administrator can change the file system access restriction settings. " DEFVAL { disabled } ::= { sysSecurity 7 } sysSecurityCUFrontICNPortAccess OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "The CU front ICN port access is used for internal connection between subracks. When this parameter is 'disabled' there is no way to access next node via ICN1 or ICN2. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the CU front ICN port access settings. " DEFVAL { enabled } ::= { sysSecurity 8 } sysSecurityChangeCUFrontICNPortAccess OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to change 'CU front ICN port access' " ::= { sysSecurity 9 } sysSecuritySubrackICNPortAccess OBJECT-TYPE SYNTAX EnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "The Subrack ICN port access is used for internal connection between subracks. When this parameter is 'disabled' there is no way to access next subrack via ICN3 or ICN4. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the Subrack ICN port access settings. " DEFVAL { enabled } ::= { sysSecurity 10 } sysSecurityChangeSubrackICNPortAccess OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to change 'Subrack ICN port access' " ::= { sysSecurity 11 } sysSecurityMgmtAccessProofOfConnStatus OBJECT-TYPE SYNTAX INTEGER { undefined (0), connected (1), disconnected (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter shows if the NE has lost the signal or not. The SNMP agent is regularly polling the NE and if the NE is not polled within a certain time period (set in parameter MgmtAccessProofOfConnectivity) we have proof of connectivity loss, and this parameter is set to disconnected. undefined - NE connectivity status not determined disconnected - NE lost connection connected - NE is connected " DEFVAL { undefined } ::= { sysSecurity 12 } sysSecurityMgmtAccessProofOfConnectivity OBJECT-TYPE SYNTAX Integer32 (1..720) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of minutes that has to pass with no SNMP agent polls before the NE assumes that connectivity is lost. Only administrator can change the proof of connectivity settings. " DEFVAL { 120 } ::= { sysSecurity 13 } sysSecurityAutoEnableBlockedMgmtPorts OBJECT-TYPE SYNTAX OnOff MAX-ACCESS read-only STATUS current DESCRIPTION "A setting to turn off/on auto enabling of blocked management ports. Management ports in this context means DCN and Local craft ETH (Local craft ETH does not exist on all platforms). If the network element has not been polled by the SNMP agent (DNA-M) within the time that is set by the attribute Proof of Connectivity, the blocked management ports are automatically enabled (deblocked/unblocked). If SNMP polling is detected again by the network element (after a discontinuity) the ports will revert to their blocked state. on - The function to auto enable blocked ports is turned on. off - The function to auto enable blocked ports is turned off. Only administrator can change the auto enable blocked management ports settings. " DEFVAL { on } ::= { sysSecurity 14 } sysSecurityBlockedMgmtPortsUnblocked OBJECT-TYPE SYNTAX FaultStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked management ports (i.e. local craft and DCN ports) are unblocked. The blocking is overridden due to loss of management connectivity (SNMP). " ::= { sysSecurity 15 } sysSecurityInstallCertificates OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to install certificates installCertificates Each is absolute (starting with '/'). After this command, the files are automatically deleted. " ::= { sysSecurity 16 } sysSecurityInstallFactoryDefaultCertificates OBJECT-TYPE SYNTAX CommandString MAX-ACCESS read-only STATUS current DESCRIPTION "Procedure to install factory default certificates. " ::= { sysSecurity 17 } -- ---------------------------------------------------- -- Manager group -- ---------------------------------------------------- sysManagerName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of Centralized Security Manager (DNA-M). This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change. " DEFVAL { "" } ::= { sysManager 1 } sysManagerIPAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The address of Centralized Security Manager (DNA-M). This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change. " ::= { sysManager 2 } sysManagerPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the Security Policy, defined in DNA-M, that is assigned to this NE. This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change. " DEFVAL { "" } ::= { sysManager 3 } sysManagerPlatform OBJECT-TYPE SYNTAX Platform MAX-ACCESS read-only STATUS current DESCRIPTION "NE platform information. Used by Centralized Security Manager (DNA-M). " DEFVAL { unknown } ::= { sysManager 4 } sysManagerFcmComplianceVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Feature Capability Matrix Compliance version. Used by Centralized Security Manager (DNA-M). " DEFVAL { "" } ::= { sysManager 5 } -- ---------------------------------------------------- -- loginBanner group -- ---------------------------------------------------- sysLoginBannerContent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The login banner can be used to display pre-login information such as system information or a warning. The login banner requires administrator privileges to change and can be set through CLI, GUI or DNA-M. Characters 0x20 to 0x25 and 0x27 to 0x7E in ISO/IEC 8859-1 are accepted/valid. Ampersand ('&') 0x26 is not allowed (this is a general XTM restriction for text fields). New-line shall be encoded as '\\n' if the message is set through CLI. Min length: 0 character. Max length: 1020 characters. Although formal SNMP type is restricted to 128 characters, the system can cope with 1020 characters when managed from CLI/GUI or DNA-M. " DEFVAL { "" } ::= { sysLoginBanner 1 } -- ---------------------------------------------------- -- Notifications -- ---------------------------------------------------- -- n/a -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- sysGeneralGroup OBJECT-GROUP OBJECTS { sysGeneralTestAndIncr, sysGeneralMibSpecVersion, sysGeneralMibImplVersion } STATUS deprecated DESCRIPTION "The general system MIB objects." ::= { lumSystemGroups 1 } sysNodeGroup OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeRunLevel } STATUS deprecated DESCRIPTION "The node properties objects." ::= { lumSystemGroups 2 } sysHostListGroup OBJECT-GROUP OBJECTS { sysHostIndex, sysHostIpAddress, sysHostNames, sysHostRowStatus } STATUS current DESCRIPTION "The host name table." ::= { lumSystemGroups 3 } sysTimeGroup OBJECT-GROUP OBJECTS { sysTimeLocal, sysTimeZone, sysTimePrimaryServer, sysTimeSecondaryServer } STATUS deprecated DESCRIPTION "The node time properties." ::= { lumSystemGroups 4 } sysLogListGroup OBJECT-GROUP OBJECTS { sysLogIndex, sysLogSelection, sysLogAction, sysLogRowStatus } STATUS deprecated DESCRIPTION "Log configuration directives." ::= { lumSystemGroups 5 } sysGeneralGroupV2 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime } STATUS deprecated DESCRIPTION "The general system MIB objects v2." ::= { lumSystemGroups 6 } sysNodeGroupV2 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeRunLevel, sysNodeSecondaryNameServer } STATUS deprecated DESCRIPTION "The node properties objects V2." ::= { lumSystemGroups 7 } sysUserGroup OBJECT-GROUP OBJECTS { sysUserIndex, sysUserName, sysUserPasswd, sysUserDescr, sysUserLastChangeTime, sysUserExpireTime, sysUserRowStatus } STATUS deprecated DESCRIPTION "The user table objects." ::= { lumSystemGroups 8 } sysNodeGroupV3 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeRunLevel, sysNodeSecondaryNameServer, sysNodeUptime } STATUS deprecated DESCRIPTION "The node properties objects V3." ::= { lumSystemGroups 9 } sysGeneralGroupV3 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralTest } STATUS current DESCRIPTION "The general system MIB objects v3." ::= { lumSystemGroups 10 } sysNodeGroupV4 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeRunLevel, sysNodeSecondaryNameServer, sysNodeUptime, sysNodeNeDistinguishedName, sysNodeNeUserName, sysNodeNeType } STATUS deprecated DESCRIPTION "The node properties objects V4." ::= { lumSystemGroups 11 } sysGeneralGroupV4 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralTest, sysGeneralConfigLastChangeTime } STATUS deprecated DESCRIPTION "The general system MIB objects v4." ::= { lumSystemGroups 12 } sysNodeGroupV5 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeSecondaryNameServer, sysNodeUptime, sysNodeNeDistinguishedName, sysNodeNeUserName, sysNodeNeType, sysNodeBootTime } STATUS deprecated DESCRIPTION "The node properties objects V5." ::= { lumSystemGroups 15 } sysRadiusGroup OBJECT-GROUP OBJECTS { sysRadiusPrimaryServer, sysRadiusPrimarySecret, sysRadiusSecondaryServer, sysRadiusSecondarySecret } STATUS deprecated DESCRIPTION "The RADIUS MIB objects." ::= { lumSystemGroups 16 } sysNodeGroupV6 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeSecondaryNameServer, sysNodeUptime, sysNodeNeDistinguishedName, sysNodeNeUserName, sysNodeNeType, sysNodeBootTime, sysNodeLocale } STATUS deprecated DESCRIPTION "The node properties objects V6." ::= { lumSystemGroups 17 } sysTimeGroupV2 OBJECT-GROUP OBJECTS { sysTimeLocal, sysTimeZone, sysTimePrimaryServer, sysTimeSecondaryServer, sysTimeChangeLocalTime } STATUS deprecated DESCRIPTION "The node time properties V2." ::= { lumSystemGroups 18 } sysLicenseGroup OBJECT-GROUP OBJECTS { sysLicenseExpireDate, sysLicenseCustomer, sysLicenseExpiresSoon, sysLicenseExpired, sysLicenseExpiredCause, sysLicenseFeatureEws, sysLicenseFeatureEws, sysLicenseFeatureOspf, sysLicenseFeatureSnmp, sysLicenseFeatureGmpls, sysLicenseFeatureRudb, sysLicenseInstallLicenseFile } STATUS current DESCRIPTION "The node license properties V1." ::= { lumSystemGroups 19 } sysTacacsGroup OBJECT-GROUP OBJECTS { sysTacacsPrimaryServer, sysTacacsSecondaryServer, sysTacacsSecret } STATUS deprecated DESCRIPTION "The TACACS+ MIB objects." ::= { lumSystemGroups 20 } sysUserGroupV2 OBJECT-GROUP OBJECTS { sysUserIndex, sysUserName, sysUserDescr, sysUserProfile, sysUserUid } STATUS current DESCRIPTION "The user table objects v2." ::= { lumSystemGroups 21 } sysGeneralGroupV5 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralTest, sysGeneralConfigLastChangeTime, sysGeneralLoginRecords } STATUS deprecated DESCRIPTION "The general system MIB objects v5." ::= { lumSystemGroups 22 } sysUserGroupV3 OBJECT-GROUP OBJECTS { sysUserIndex, sysUserName, sysUserDescr, sysUserProfile, sysUserUid, sysUserChangePassword, sysUserClearPassword, sysUserDisable } STATUS deprecated DESCRIPTION "The user table objects v3." ::= { lumSystemGroups 23 } sysTacacsGroupV2 OBJECT-GROUP OBJECTS { sysTacacsPrimaryServer, sysTacacsSecondaryServer, sysTacacsSecret, sysTacacsSecondarySecret } STATUS deprecated DESCRIPTION "The TACACS+ MIB objects v2." ::= { lumSystemGroups 24 } sysGeneralGroupV6 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralTest, sysGeneralConfigLastChangeTime, sysGeneralLoginRecords, sysGeneralUserTableSize } STATUS deprecated DESCRIPTION "The general system MIB objects v6." ::= { lumSystemGroups 25 } sysUserGroupV4 OBJECT-GROUP OBJECTS { sysUserIndex, sysUserName, sysUserDescr, sysUserProfile, sysUserUid, sysUserChangePassword, sysUserClearPassword, sysUserDisable, sysUserMode, sysUserEnable } STATUS current DESCRIPTION "The user table objects v4." ::= { lumSystemGroups 26 } sysSecurityGroupV1 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess } STATUS deprecated DESCRIPTION "The security group objects v1 (7.0)." ::= { lumSystemGroups 27 } sysNodeGroupV7 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeSecondaryNameServer, sysNodeUptime, sysNodeNeDistinguishedName, sysNodeNeUserName, sysNodeNeType, sysNodeBootTime, sysNodeLocale, sysNodeVersion } STATUS deprecated DESCRIPTION "The node properties objects V7." ::= { lumSystemGroups 28 } sysTacacsGroupV3 OBJECT-GROUP OBJECTS { sysTacacsSecret, sysTacacsSecondarySecret, sysTacacsPrimaryIpAddress, sysTacacsSecondaryIpAddress } STATUS current DESCRIPTION "The TACACS+ MIB objects v3." ::= { lumSystemGroups 29 } sysRadiusGroupV2 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress } STATUS deprecated DESCRIPTION "The RADIUS MIB objects." ::= { lumSystemGroups 30 } sysTimeGroupV3 OBJECT-GROUP OBJECTS { sysTimeLocal, sysTimeZone, sysTimeChangeLocalTime, sysTimePrimaryIpAddress, sysTimeSecondaryIpAddress} STATUS current DESCRIPTION "The node time properties V3." ::= { lumSystemGroups 31 } sysSecurityGroupV2 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess, sysSecurityIpTablesStatus } STATUS deprecated DESCRIPTION "The security group objects v2 (12.0)." ::= { lumSystemGroups 32 } sysRadiusGroupV3 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress, sysRadiusPrimaryPort, sysRadiusSecondaryPort } STATUS deprecated DESCRIPTION "The RADIUS MIB objects V3." ::= { lumSystemGroups 33 } sysRadiusGroupV4 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress, sysRadiusPrimaryPort, sysRadiusSecondaryPort, sysRadiusDefaultUserProfile} STATUS current DESCRIPTION "The RADIUS MIB objects V4." ::= { lumSystemGroups 34 } sysGeneralGroupV7 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralConfigLastChangeTime, sysGeneralLoginRecords, sysGeneralUserTableSize, sysGeneralWriteTest } STATUS current DESCRIPTION "The general system MIB objects v7." ::= { lumSystemGroups 35 } sysSecurityGroupV3 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess, sysSecurityLocalCraftAccess, sysSecurityChangeLocalCraftAccess, sysSecurityIpTablesStatus, sysSecurityAuthenticationOrder} STATUS deprecated DESCRIPTION "The security group objects v3 (27.0)." ::= { lumSystemGroups 36 } sysNodeGroupV8 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeContact, sysNodeLocation, sysNodeObjectId, sysNodePrimaryNameServer, sysNodeSecondaryNameServer, sysNodeUptime, sysNodeNeDistinguishedName, sysNodeNeUserName, sysNodeNeType, sysNodeBootTime, sysNodeLocale, sysNodeVersion, sysNodeCLLI, sysNodeFIC, sysNodeTID, sysNodeLatitude, sysNodeLongitude} STATUS current DESCRIPTION "The node properties objects V8 (28.0)." ::= { lumSystemGroups 37 } sysSecurityGroupV4 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess, sysSecurityLocalCraftAccess, sysSecurityChangeLocalCraftAccess, sysSecurityIpTablesStatus, sysSecurityAuthenticationOrder, sysSecurityFileSystemAccessRestrictions} STATUS deprecated DESCRIPTION "The security group objects v4 (29.0)." ::= { lumSystemGroups 38 } sysSecurityGroupV5 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess, sysSecurityLocalCraftAccess, sysSecurityChangeLocalCraftAccess, sysSecurityIpTablesStatus, sysSecurityAuthenticationOrder, sysSecurityFileSystemAccessRestrictions, sysSecurityCUFrontICNPortAccess, sysSecurityChangeCUFrontICNPortAccess, sysSecuritySubrackICNPortAccess, sysSecurityChangeSubrackICNPortAccess, sysSecurityMgmtAccessProofOfConnStatus, sysSecurityMgmtAccessProofOfConnectivity, sysSecurityAutoEnableBlockedMgmtPorts, sysSecurityBlockedMgmtPortsUnblocked } STATUS deprecated DESCRIPTION "The security group objects v5 (30.0)." ::= { lumSystemGroups 39 } sysSecurityGroupV6 OBJECT-GROUP OBJECTS { sysSecurityLocalConsoleAccess, sysSecurityChangeLocalConsoleAccess, sysSecurityLocalCraftAccess, sysSecurityChangeLocalCraftAccess, sysSecurityIpTablesStatus, sysSecurityAuthenticationOrder, sysSecurityFileSystemAccessRestrictions, sysSecurityCUFrontICNPortAccess, sysSecurityChangeCUFrontICNPortAccess, sysSecuritySubrackICNPortAccess, sysSecurityChangeSubrackICNPortAccess, sysSecurityMgmtAccessProofOfConnStatus, sysSecurityMgmtAccessProofOfConnectivity, sysSecurityAutoEnableBlockedMgmtPorts, sysSecurityBlockedMgmtPortsUnblocked, sysSecurityInstallCertificates, sysSecurityInstallFactoryDefaultCertificates } STATUS current DESCRIPTION "The security group objects v6 (32.0)." ::= { lumSystemGroups 40 } sysManagerGroupV1 OBJECT-GROUP OBJECTS { sysManagerName, sysManagerIPAddress, sysManagerPolicyName, sysManagerPlatform } STATUS deprecated DESCRIPTION "The manager group objects v1 (32.0)." ::= { lumSystemGroups 41 } sysLoginBannerGroupV1 OBJECT-GROUP OBJECTS { sysLoginBannerContent } STATUS current DESCRIPTION "The loginBanner group objects v1 (32.1)." ::= { lumSystemGroups 42 } sysManagerGroupV2 OBJECT-GROUP OBJECTS { sysManagerName, sysManagerIPAddress, sysManagerPolicyName, sysManagerPlatform, sysManagerFcmComplianceVersion} STATUS current DESCRIPTION "The manager group objects v2 (32.1)." ::= { lumSystemGroups 43 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- lumSystemBasicComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V1." MODULE MANDATORY-GROUPS { sysGeneralGroup, sysNodeGroup, sysTimeGroup, sysLogListGroup, sysHostListGroup } ::= { lumSystemCompl 1 } lumSystemBasicComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V2." MODULE MANDATORY-GROUPS { sysGeneralGroupV2, sysTimeGroup, sysNodeGroup } ::= { lumSystemCompl 2 } lumSystemBasicComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V3." MODULE MANDATORY-GROUPS { sysGeneralGroupV2, sysTimeGroup, sysNodeGroupV2, sysUserGroup } ::= { lumSystemCompl 3 } lumSystemBasicComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V4." MODULE MANDATORY-GROUPS { sysGeneralGroupV2, sysTimeGroup, sysNodeGroupV3, sysUserGroup } ::= { lumSystemCompl 4 } lumSystemBasicComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V5." MODULE MANDATORY-GROUPS { sysGeneralGroupV3, sysTimeGroup, sysNodeGroupV3, sysUserGroup } ::= { lumSystemCompl 5 } lumSystemBasicComplV6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V6." MODULE MANDATORY-GROUPS { sysGeneralGroupV3, sysTimeGroup, sysNodeGroupV4, sysUserGroup } ::= { lumSystemCompl 6 } lumSystemBasicComplV7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V7." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroup, sysNodeGroupV5, sysUserGroup } ::= { lumSystemCompl 7 } lumSystemBasicComplV8 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V8." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroup, sysNodeGroupV5, sysUserGroup, sysRadiusGroup } ::= { lumSystemCompl 8 } lumSystemBasicComplV9 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V9." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroup, sysNodeGroupV6, sysUserGroup, sysRadiusGroup } ::= { lumSystemCompl 9 } lumSystemBasicComplV10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V10 (2.2)." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup } ::= { lumSystemCompl 10 } lumSystemBasicComplV11 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V11." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroup } ::= { lumSystemCompl 11 } lumSystemBasicComplV12 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V12." MODULE MANDATORY-GROUPS { sysGeneralGroupV4, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroup, sysUserGroupV2 } ::= { lumSystemCompl 12 } lumSystemBasicComplV13 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V13." MODULE MANDATORY-GROUPS { sysGeneralGroupV5, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroup, sysUserGroupV2 } ::= { lumSystemCompl 13 } lumSystemBasicComplV14 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V14." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroupV2, sysUserGroupV3 } ::= { lumSystemCompl 14 } lumSystemBasicComplV15 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V15 (4.0)." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroupV2, sysUserGroupV4 } ::= { lumSystemCompl 15 } lumSystemBasicComplV16 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V16 (7.0)." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV2, sysNodeGroupV6, sysRadiusGroup, sysLicenseGroup, sysTacacsGroupV2, sysUserGroupV4, sysSecurityGroupV1 } ::= { lumSystemCompl 16 } lumSystemBasicComplV17 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V17 (10.0)." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV2, sysNodeGroupV7, sysRadiusGroup, sysLicenseGroup, sysTacacsGroupV2, sysUserGroupV4, sysSecurityGroupV1 } ::= { lumSystemCompl 17 } lumSystemBasicComplV18 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V18 (11.0)." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV3, sysNodeGroupV7, sysRadiusGroupV2, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV1 } ::= { lumSystemCompl 18 } lumSystemBasicComplV19 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V19 (12.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV3, sysNodeGroupV7, sysRadiusGroupV2, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV2 } ::= { lumSystemCompl 19 } lumSystemBasicComplV20 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V20 (13.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV3, sysNodeGroupV7, sysRadiusGroupV3, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV2 } ::= { lumSystemCompl 20 } lumSystemBasicComplV21 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V21 (13.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV6, sysTimeGroupV3, sysNodeGroupV7, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV2 } ::= { lumSystemCompl 21 } lumSystemBasicComplV22 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V22 (23.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV7, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV2 } ::= { lumSystemCompl 22 } lumSystemBasicComplV23 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V23 (28.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV2 } ::= { lumSystemCompl 23 } lumSystemBasicComplV24 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V24 (29.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV4 } ::= { lumSystemCompl 24 } lumSystemBasicComplV25 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V25 (30.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV5 } ::= { lumSystemCompl 25 } lumSystemBasicComplV26 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V26 (30.1). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV5 } ::= { lumSystemCompl 26 } lumSystemBasicComplV27 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V27 (32.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV6 } ::= { lumSystemCompl 27 } lumSystemBasicComplV28 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Basic implementation requirements for the system MIB V28 (32.0). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV6, sysManagerGroupV1 } ::= { lumSystemCompl 28 } lumSystemBasicComplV29 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the system MIB V29 (32.1). Used to indicate web-server less vulnerable to hanging." MODULE MANDATORY-GROUPS { sysGeneralGroupV7, sysTimeGroupV3, sysNodeGroupV8, sysRadiusGroupV4, sysLicenseGroup, sysTacacsGroupV3, sysUserGroupV4, sysSecurityGroupV6, sysManagerGroupV2, sysLoginBannerGroupV1 } ::= { lumSystemCompl 29 } -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- sysGeneralMinimalGroupV1 OBJECT-GROUP OBJECTS { sysGeneralLastChangeTime, sysGeneralConfigLastChangeTime } STATUS current DESCRIPTION "The minimal general system MIB objects v1." ::= { lumSystemMinimalGroups 1 } sysNodeMinimalGroupV1 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeNeUserName, sysNodeBootTime } STATUS deprecated DESCRIPTION "The minimal node properties objects v1." ::= { lumSystemMinimalGroups 2 } sysTimeMinimalGroupV1 OBJECT-GROUP OBJECTS { sysTimeLocal } STATUS deprecated DESCRIPTION "The minimal node time properties v1." ::= { lumSystemMinimalGroups 3 } sysNodeMinimalGroupV2 OBJECT-GROUP OBJECTS { sysNodeName, sysNodeNeUserName, sysNodeLocation, sysNodeContact, sysNodeBootTime } STATUS current DESCRIPTION "The minimal node properties objects v2." ::= { lumSystemMinimalGroups 4 } sysTimeMinimalGroupV2 OBJECT-GROUP OBJECTS { sysTimeLocal, sysTimeZone, sysTimePrimaryServer } STATUS deprecated DESCRIPTION "The minimal node time properties v2." ::= { lumSystemMinimalGroups 5 } sysRadiusMinimalGroupV1 OBJECT-GROUP OBJECTS { sysRadiusPrimaryServer, sysRadiusPrimarySecret, sysRadiusSecondaryServer, sysRadiusSecondarySecret } STATUS deprecated DESCRIPTION "The minimal node RADIUS MIB objects v1." ::= { lumSystemMinimalGroups 6 } sysTimeMinimalGroupV3 OBJECT-GROUP OBJECTS { sysTimeLocal, sysTimeZone, sysTimePrimaryIpAddress } STATUS current DESCRIPTION "The minimal node time properties v3." ::= { lumSystemMinimalGroups 7 } sysRadiusMinimalGroupV2 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress } STATUS deprecated DESCRIPTION "The minimal node RADIUS MIB objects v2." ::= { lumSystemMinimalGroups 8 } sysRadiusMinimalGroupV3 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress, sysRadiusPrimaryPort, sysRadiusSecondaryPort } STATUS deprecated DESCRIPTION "The minimal node RADIUS MIB objects v3." ::= { lumSystemMinimalGroups 9 } sysRadiusMinimalGroupV4 OBJECT-GROUP OBJECTS { sysRadiusPrimarySecret, sysRadiusSecondarySecret, sysRadiusPrimaryIpAddress, sysRadiusSecondaryIpAddress, sysRadiusPrimaryPort, sysRadiusSecondaryPort, sysRadiusDefaultUserProfile} STATUS current DESCRIPTION "The minimal node RADIUS MIB objects v4." ::= { lumSystemMinimalGroups 10 } -- ---------------------------------------------------- -- Minimal Compliance -- ---------------------------------------------------- lumSystemMinimalComplV1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the system MIB V1." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV1, sysNodeMinimalGroupV1 } ::= { lumSystemMinimalCompl 1 } lumSystemMinimalComplV2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the system MIB V2." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV1, sysNodeMinimalGroupV2 } ::= { lumSystemMinimalCompl 2 } lumSystemMinimalComplV3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the system MIB V3." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV2, sysNodeMinimalGroupV2, sysRadiusMinimalGroupV1 } ::= { lumSystemMinimalCompl 3 } lumSystemMinimalComplV4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the system MIB V4." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV3, sysNodeMinimalGroupV2, sysRadiusMinimalGroupV2 } ::= { lumSystemMinimalCompl 4 } lumSystemMinimalComplV5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Minimal implementation requirements for the system MIB V5." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV3, sysNodeMinimalGroupV2, sysRadiusMinimalGroupV3 } ::= { lumSystemMinimalCompl 5 } lumSystemMinimalComplV6 MODULE-COMPLIANCE STATUS current DESCRIPTION "Minimal implementation requirements for the system MIB V6." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV3, sysNodeMinimalGroupV2, sysRadiusMinimalGroupV4 } ::= { lumSystemMinimalCompl 6} lumSystemMinimalComplV7 MODULE-COMPLIANCE STATUS current DESCRIPTION "Minimal implementation requirements for the system MIB V7 (30.1)." MODULE MANDATORY-GROUPS { sysGeneralMinimalGroupV1, sysTimeMinimalGroupV3, sysNodeMinimalGroupV2, sysRadiusMinimalGroupV4 } ::= { lumSystemMinimalCompl 7} END