JANITZA-MIB DEFINITIONS ::= BEGIN IMPORTS sysUpTime, DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 mib-2 FROM SNMPv2-SMI enterprises, TimeTicks FROM RFC1155-SMI; system OBJECT IDENTIFIER ::= { mib-2 1 } snmp OBJECT IDENTIFIER ::= { mib-2 11 } sysDescr OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software." ::= { system 1 } sysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.424242, it could assign the identifier 1.3.6.1.4.1.424242.1.1 to its `Fred Router'." ::= { system 2 } sysUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the network management portion of the system was last re-initialized." ::= { system 3 } sysName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string." ::= { system 5 } sysLocation OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string." ::= { system 6 } sysServices OBJECT-TYPE SYNTAX INTEGER (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "A value which indicates the set of services that this entity may potentially offer. The value is a sum. This sum initially takes the value zero. Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs only routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., supports the IP) 4 end-to-end (e.g., supports the TCP) 7 applications (e.g., supports the SMTP) For systems including OSI protocols, layers 5 and 6 may also be counted." ::= { system 7 } janitza OBJECT IDENTIFIER ::= { enterprises 34278} rmsPhase OBJECT IDENTIFIER ::= { janitza 1 } uLN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L1 in 100mV" ::= { rmsPhase 1 } uLN2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L2 in 100mV" ::= { rmsPhase 2 } uLN3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L3 in 100mV" ::= { rmsPhase 3 } uLN4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Pahse L4 in 100mV" ::= { rmsPhase 4 } uL1L2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L1-L2 in 100mV" ::= { rmsPhase 5 } uL2L3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L2-L3 in 100mV" ::= { rmsPhase 6 } uL3L1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Voltage Phase L3-L1 in 100mV" ::= { rmsPhase 7 } iL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Current Phase L1 in 1mA" ::= { rmsPhase 8 } iL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Current Phase L2 in 1mA" ::= { rmsPhase 9 } iL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Current Phase L3 in 1mA" ::= { rmsPhase 10 } iL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Current Phase L4 in 1mA" ::= { rmsPhase 11 } pL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power L1 in Watt" ::= { rmsPhase 12 } pL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power L2 in Watt" ::= { rmsPhase 13 } pL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power L3 in Watt" ::= { rmsPhase 14 } pL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power L4 in Watt" ::= { rmsPhase 15 } qL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power L1 in VAr" ::= { rmsPhase 16 } qL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power L2 in VAr" ::= { rmsPhase 17 } qL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power L3 in VAr" ::= { rmsPhase 18 } qL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power L4 in VAr" ::= { rmsPhase 19 } sL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power L1 in VA" ::= { rmsPhase 20 } sL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power L2 in VA" ::= { rmsPhase 21 } sL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power L3 in VA" ::= { rmsPhase 22 } sL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power L4 in VA" ::= { rmsPhase 23 } cosPL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cos(Phi) L1 * 0.001" ::= { rmsPhase 24 } cosPL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cos(Phi) L2 * 0.001" ::= { rmsPhase 25 } cosPL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cos(Phi) L3 * 0.001" ::= { rmsPhase 26 } cosPL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Cos(Phi) L4 * 0.001" ::= { rmsPhase 27 } rmsSumme3 OBJECT IDENTIFIER ::= { janitza 2 } p3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power Summe L1..L3 in Watt" ::= { rmsSumme3 1} q3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power Summe L1..L3 in Watt" ::= { rmsSumme3 2} s3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power Summe L1..L3 in Watt" ::= { rmsSumme3 3} cosP3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "COS(Phi) Summe L1..L3 *0.001" ::= { rmsSumme3 4} rmsSumme4 OBJECT IDENTIFIER ::= { janitza 3 } p4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Real Power Summe L1..L4 in Watt" ::= { rmsSumme4 1} q4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktiv Power Summe L1..L4 in Watt" ::= { rmsSumme4 2} s4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Power Summe L1..L4 in Watt" ::= { rmsSumme4 3} cosP4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "COS(Phi) Summe L1..L4 *0.001" ::= { rmsSumme4 4} energiePhase OBJECT IDENTIFIER ::= { janitza 4 } whL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Phase L1 in 0.1 KWh" ::= { energiePhase 1} whL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Phase L2 in 0.1 KWh" ::= { energiePhase 2} whL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Phase L3 in 0.1 KWh" ::= { energiePhase 3} whL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Phase L4 in 0.1 KWh" ::= { energiePhase 4} qhL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Phase L1 in 0.1 KVArh" ::= { energiePhase 5} qhL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Phase L2 in 0.1 KVArh" ::= { energiePhase 6} qhL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Phase L3 in 0.1 KVArh" ::= { energiePhase 7} qhL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Phase L4 in 0.1 KVArh" ::= { energiePhase 8} energieSumme3 OBJECT IDENTIFIER ::= { janitza 5 } wh3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Summe L1..L3 in 0.1 KWh" ::= { energieSumme3 1} qh3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Summe L1..L3 in 0.1 KWh" ::= { energieSumme3 2} energieSumme4 OBJECT IDENTIFIER ::= { janitza 6 } wh4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Active Energie Summe L1..L4 in 0.1 KWh" ::= { energieSumme4 1} qh4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Reaktive Energie Summe L1..L4 in 0.1 KWh" ::= { energieSumme4 2} thd OBJECT IDENTIFIER ::= { janitza 7 } thdULN1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Voltage Phase L1 * 0.1%" ::= { thd 1 } thdULN2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Voltage Phase L2 * 0.1%" ::= { thd 2 } thdULN3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Voltage Phase L3 * 0.1%" ::= { thd 3 } thdULN4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Voltage Phase L4 * 0.1%" ::= { thd 4 } thdIL1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Current Phase L1 * 0.1%" ::= { thd 5 } thdIL2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Current Phase L2 * 0.1%" ::= { thd 6 } thdIL3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Current Phase L3 * 0.1%" ::= { thd 7 } thdIL4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Total Harmonic Distortion Current Phase L4 * 0.1%" ::= { thd 8 } misc OBJECT IDENTIFIER ::= { janitza 8 } frequenz OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frequenz* 0.01 Hz" ::= { misc 1 } user OBJECT IDENTIFIER ::= { janitza 9 } jasicVAR1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[0]" ::= { user 1 } jasicVAR2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[1]" ::= { user 2 } jasicVAR3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[2]" ::= { user 3 } jasicVAR4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[3]" ::= { user 4 } jasicVAR5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[4]" ::= { user 5 } jasicVAR6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[5]" ::= { user 6 } jasicVAR7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[6]" ::= { user 7 } jasicVAR8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[7]" ::= { user 8 } jasicVAR9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[8]" ::= { user 9 } jasicVAR10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[9]" ::= { user 10 } jasicVAR11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[10]" ::= { user 11 } jasicVAR12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[11]" ::= { user 12 } jasicVAR13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[12]" ::= { user 13 } jasicVAR14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[13]" ::= { user 14 } jasicVAR15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[14]" ::= { user 15 } jasicVAR16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Jasic User Variable to user for Jasic :_snmp_uservar[15]" ::= { user 16 } coldStart TRAP-TYPE ENTERPRISE snmp DESCRIPTION "A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the rotocol entity implementation may be altered." ::= 0 warmStart TRAP-TYPE ENTERPRISE snmp DESCRIPTION "A warmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent configuration nor the protocol entity implementation is altered." ::= 1 userTrap1 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 6" ::= 6 userTrap2 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 7" ::= 7 userTrap3 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 8" ::= 8 userTrap4 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 9" ::= 9 userTrap5 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 10" ::= 10 userTrap6 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 11" ::= 11 userTrap7 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 12" ::= 12 userTrap8 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 13" ::= 13 userTrap9 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 14" ::= 14 userTrap10 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 15" ::= 15 userTrap11 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 16" ::= 16 userTrap12 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 17" ::= 17 userTrap13 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 18" ::= 18 userTrap14 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 19" ::= 19 userTrap15 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 20" ::= 20 userTrap16 TRAP-TYPE ENTERPRISE janitza DESCRIPTION "Jasic Trap : use type=6 , subtype = 21" ::= 21 END