-- ***************************************************************************** -- draft-ietf-idr-bgp4-mibv2-03.txt -- -- Copyright (c) 2002 The Internet Society. -- Copyright (c) 2003-2013, Juniper Networks, Inc. -- All rights reserved. -- -- Juniper Networks edits to this MIB: *** JNX *** -- 09/09/03 Assigned an enterprise experimental OID and added "jnx" prefix. -- Fixed AUGMENTS entry for the bgpM2CfgPeerConfedMemberTable. -- Added bgpM2PeerRoutingInstance to bgpM2PeerTable. -- Added REVISION clause to MODULE-IDENTITY. -- Fixed conformance clauses. -- 12/12/17 Redefines the value for jnxBgpM2PrefixesInPrefixesRejected -- so that it conforms to the definition. -- Add a new counter in the same sequence to return the number -- of activeprefixes received from the peer -- jnxBgpM2PrefixInPrefixesActive. -- ***************************************************************************** BGP4-V2-MIB-JUNIPER DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, Unsigned32, Integer32, TimeTicks -- *** JNX *** FROM SNMPv2-SMI -- Note that the following reference to INET-ADDRESS-MIB -- refers to the version as published in the RFC 2851 -- update internet draft. InetAddressType, InetAddress, InetPortNumber, InetAutonomousSystemNumber, InetAddressPrefixLength FROM INET-ADDRESS-MIB -- Juniper specific *** JNX *** jnxBgpM2Experiment -- *** JNX *** FROM JUNIPER-EXPERIMENT-MIB -- *** JNX *** TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; jnxBgpM2 MODULE-IDENTITY LAST-UPDATED "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX *** ORGANIZATION "IETF IDR Working Group" CONTACT-INFO "E-mail: idr@merit.net Jeffrey Haas (Editor) 825 Victors Way, Suite 100 Ann Arbor, MI 48108 Tel: +1 734 222-1600 Fax: +1 734 222-1602 E-mail: jhaas@nexthop.com" DESCRIPTION "This MIB module defines management objects for the Border Gateway Protocol, Version 4." REVISION "201212170000Z" -- *** JNX *** DESCRIPTION -- *** JNX *** "This change redefines the value returned for the -- *** JNX *** variable jnxBgpM2PrefixesInPrefixesRejected so that -- *** JNX *** it conforms to the definition. -- *** JNX *** It also adds a new counter in the same sequence to -- *** JNX *** return the number of active prefixes received from -- *** JNX *** the peer: jnxBgpM2PrefixInPrefixesActive" -- *** JNX *** REVISION "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX *** DESCRIPTION -- *** JNX *** "This is a proprietary implementation of the -- *** JNX *** draft-ietf-idr-bgp4-mibv2-03.txt MIB as written by -- *** JNX *** the IETF Inter-Domain Routing Working Group. -- *** JNX *** This Juniper experimental MIB will be retired when a -- *** JNX *** valid oid branch is assigned." -- *** JNX *** REVISION "200211040000Z" -- *** JNX *** DESCRIPTION -- *** JNX *** "draft-ietf-idr-bgp4-mibv2-03.txt version written by -- *** JNX *** the IETF Inter-Domain Routing Working Group." -- *** JNX *** -- ::= { mib-2 XXX } *** JNX *** ::= { jnxBgpM2Experiment 1 } -- *** JNX *** JnxBgpM2Identifier ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d." STATUS current DESCRIPTION "The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address." SYNTAX OCTET STRING(SIZE (4)) JnxBgpM2Safi ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The representation of a BGP Safi" SYNTAX Unsigned32(0..255) JnxBgpM2Community ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d:" STATUS current DESCRIPTION "The representation of a BGP Community." SYNTAX OCTET STRING(SIZE(4)) JnxBgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x:" STATUS current DESCRIPTION "The representation of a BGP Extended Community." SYNTAX OCTET STRING(SIZE(8)) jnxBgpM2BaseScalars OBJECT IDENTIFIER ::= { jnxBgpM2 1 } -- -- Notifications -- jnxBgpM2BaseNotifications OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 0 } jnxBgpM2Established NOTIFICATION-TYPE OBJECTS { jnxBgpM2PeerLocalAddrType, jnxBgpM2PeerLocalAddr, jnxBgpM2PeerRemoteAddrType, jnxBgpM2PeerRemoteAddr, jnxBgpM2PeerLastErrorReceived, jnxBgpM2PeerState } STATUS current DESCRIPTION "The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state." ::= { jnxBgpM2BaseNotifications 1 } jnxBgpM2BackwardTransition NOTIFICATION-TYPE OBJECTS { jnxBgpM2PeerLocalAddrType, jnxBgpM2PeerLocalAddr, jnxBgpM2PeerRemoteAddrType, jnxBgpM2PeerRemoteAddr, jnxBgpM2PeerLastErrorReceived, jnxBgpM2PeerLastErrorReceivedText, jnxBgpM2PeerState } STATUS current DESCRIPTION "The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state." ::= { jnxBgpM2BaseNotifications 2 } -- -- BGP Supported Version Table -- jnxBgpM2Version OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 1 } jnxBgpM2VersionTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2VersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of supported BGP versions." ::= { jnxBgpM2Version 1 } jnxBgpM2VersionEntry OBJECT-TYPE SYNTAX JnxBgpM2VersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum." INDEX { jnxBgpM2VersionIndex } ::= { jnxBgpM2VersionTable 1 } JnxBgpM2VersionEntry ::= SEQUENCE { jnxBgpM2VersionIndex Unsigned32, jnxBgpM2VersionSupported TruthValue } jnxBgpM2VersionIndex OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the BGP Protocol." ::= { jnxBgpM2VersionEntry 1 } jnxBgpM2VersionSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this version of the BGP protocol identified in 'jnxBgpM2VersionIndex' is supported. The absence of a row for a particular jnxBgpM2VersionIndex indicates that that jnxBgpM2VersionIndex protocol version number is not supported." ::= { jnxBgpM2VersionEntry 2 } -- -- Supported authentication mechanisms -- jnxBgpM2SupportedAuthentication OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 2 } jnxBgpM2SupportedAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2SupportedAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The supported BGP authentication mechanisms." ::= { jnxBgpM2SupportedAuthentication 1 } jnxBgpM2SupportedAuthEntry OBJECT-TYPE SYNTAX JnxBgpM2SupportedAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information whether a given BGP authentication mechanism is supported by this implementation." INDEX { jnxBgpM2SupportedAuthCode } ::= { jnxBgpM2SupportedAuthTable 1 } JnxBgpM2SupportedAuthEntry ::= SEQUENCE { jnxBgpM2SupportedAuthCode Unsigned32, jnxBgpM2SupportedAuthValue TruthValue } jnxBgpM2SupportedAuthCode OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP authentication code." ::= { jnxBgpM2SupportedAuthEntry 1 } jnxBgpM2SupportedAuthValue OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if a given authentication method is supported by the local implementation." ::= { jnxBgpM2SupportedAuthEntry 2 } -- -- Supported BGP Capabilities -- jnxBgpM2SupportedCapabilities OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 3 } jnxBgpM2CapabilitySupportAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if capability support is available and is enabled." ::= { jnxBgpM2SupportedCapabilities 1 } jnxBgpM2SupportedCapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of supported BGP-4 capabilities." ::= { jnxBgpM2SupportedCapabilities 2 } jnxBgpM2SupportedCapabilitiesEntry OBJECT-TYPE SYNTAX JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about supported capabilities indexed by capability number." INDEX { jnxBgpM2SupportedCapabilityCode } ::= { jnxBgpM2SupportedCapabilitiesTable 1 } JnxBgpM2SupportedCapabilitiesEntry ::= SEQUENCE { -- *** JNX *** jnxBgpM2SupportedCapabilityCode Unsigned32, jnxBgpM2SupportedCapability TruthValue } jnxBgpM2SupportedCapabilityCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code." ::= { jnxBgpM2SupportedCapabilitiesEntry 1 } jnxBgpM2SupportedCapability OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is True if this capability is supported, False otherwise." ::= { jnxBgpM2SupportedCapabilitiesEntry 2 } -- -- Base Scalars -- jnxBgpM2AsSize OBJECT-TYPE SYNTAX INTEGER { twoOctet(1), fourOctet(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft." REFERENCE "draft-ietf-idr-as4bytes-04" ::= { jnxBgpM2BaseScalars 4 } jnxBgpM2LocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535." ::= { jnxBgpM2BaseScalars 5 } jnxBgpM2LocalIdentifier OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier." ::= { jnxBgpM2BaseScalars 6 } -- -- Base Scalar Extensions -- jnxBgpM2BaseScalarExtensions OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 7 } jnxBgpM2BaseScalarNonCapExts OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 1 } jnxBgpM2BaseScalarCapExts OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 2 } -- -- Base Scalar Route Reflection Extensions -- jnxBgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarNonCapExts 2796 } jnxBgpM2RouteReflector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2BaseScalarRouteReflectExts 1 } jnxBgpM2ClusterId OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2BaseScalarRouteReflectExts 2 } -- -- Base Scalar AS Confederation Extensions -- jnxBgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarNonCapExts 3065 } jnxBgpM2ConfederationRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { jnxBgpM2BaseScalarASConfedExts 1 } jnxBgpM2ConfederationId OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { jnxBgpM2BaseScalarASConfedExts 2 } -- -- Base Configuration Objects -- jnxBgpM2BaseScalarConfiguration OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 8 } jnxBgpM2CfgBaseScalarStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the intended storage type for all configurable base scalars." ::= { jnxBgpM2BaseScalarConfiguration 1 } jnxBgpM2CfgLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The local autonomous system number. If the jnxBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535." ::= { jnxBgpM2BaseScalarConfiguration 2 } jnxBgpM2CfgLocalIdentifier OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-write STATUS current DESCRIPTION "The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier." ::= { jnxBgpM2BaseScalarConfiguration 3 } -- -- Base Scalar Extensions -- jnxBgpM2CfgBaseScalarExtensions OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarConfiguration 4 } jnxBgpM2CfgBaseScalarNonCapExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 1 } jnxBgpM2CfgBaseScalarCapExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 2 } -- -- Base Scalar Route Reflection Extensions -- jnxBgpM2CfgBaseScalarReflectorExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 2796 } jnxBgpM2CfgRouteReflector OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value is set to true if this implementation will be supporting route reflection." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2CfgBaseScalarReflectorExts 1 } jnxBgpM2CfgClusterId OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-write STATUS current DESCRIPTION "The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's JnxBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2CfgBaseScalarReflectorExts 2 } -- -- Base Scalar AS Confederation Extensions -- jnxBgpM2CfgBaseScalarASConfedExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 3065 } jnxBgpM2CfgConfederationRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value is set to true if this implementation will be supporting BGP AS Confederations." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { jnxBgpM2CfgBaseScalarASConfedExts 1 } jnxBgpM2CfgConfederationId OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-write STATUS current DESCRIPTION "The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router." REFERENCE "RFC 3065 - Autonomous System Confederations for BGP" ::= { jnxBgpM2CfgBaseScalarASConfedExts 2 } -- -- BGP Peer Data -- jnxBgpM2Peer OBJECT IDENTIFIER ::= { jnxBgpM2 2 } jnxBgpM2PeerData OBJECT IDENTIFIER ::= { jnxBgpM2Peer 1 } jnxBgpM2PeerTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers." ::= { jnxBgpM2PeerData 1 } jnxBgpM2PeerEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the connection with a remote BGP peer." INDEX { jnxBgpM2PeerRoutingInstance, jnxBgpM2PeerLocalAddrType, jnxBgpM2PeerLocalAddr, jnxBgpM2PeerRemoteAddrType, jnxBgpM2PeerRemoteAddr } ::= { jnxBgpM2PeerTable 1 } JnxBgpM2PeerEntry ::= SEQUENCE { jnxBgpM2PeerIdentifier JnxBgpM2Identifier, jnxBgpM2PeerState INTEGER, jnxBgpM2PeerStatus INTEGER, jnxBgpM2PeerConfiguredVersion Unsigned32, jnxBgpM2PeerNegotiatedVersion Unsigned32, jnxBgpM2PeerLocalAddrType InetAddressType, jnxBgpM2PeerLocalAddr InetAddress, jnxBgpM2PeerLocalPort InetPortNumber, jnxBgpM2PeerLocalAs InetAutonomousSystemNumber, jnxBgpM2PeerRemoteAddrType InetAddressType, jnxBgpM2PeerRemoteAddr InetAddress, jnxBgpM2PeerRemotePort InetPortNumber, jnxBgpM2PeerRemoteAs InetAutonomousSystemNumber, jnxBgpM2PeerIndex Unsigned32, -- *** JNX *** jnxBgpM2PeerRoutingInstance -- *** JNX *** Unsigned32 } jnxBgpM2PeerIdentifier OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is in the OpenConfirm or the Established state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" ::= { jnxBgpM2PeerEntry 1 } jnxBgpM2PeerState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The remote BGP peer's FSM state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 8" ::= { jnxBgpM2PeerEntry 2 } jnxBgpM2PeerStatus OBJECT-TYPE SYNTAX INTEGER { halted(1), running(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The jnxBgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running." ::= { jnxBgpM2PeerEntry 3 } jnxBgpM2PeerConfiguredVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol." ::= { jnxBgpM2PeerEntry 4 } jnxBgpM2PeerNegotiatedVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated version of BGP running between the two peers." ::= { jnxBgpM2PeerEntry 5 } jnxBgpM2PeerLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the local end of the peering session." ::= { jnxBgpM2PeerEntry 6 } jnxBgpM2PeerLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the local end of the peering session." ::= { jnxBgpM2PeerEntry 7 } jnxBgpM2PeerLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The local port for the TCP connection between the BGP peers." ::= { jnxBgpM2PeerEntry 8 } jnxBgpM2PeerLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer." ::= { jnxBgpM2PeerEntry 9 } jnxBgpM2PeerRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the remote end of the peering session." ::= { jnxBgpM2PeerEntry 10 } jnxBgpM2PeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote end of the peering session." ::= { jnxBgpM2PeerEntry 11 } jnxBgpM2PeerRemotePort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects jnxBgpM2PeerLocalAddr, jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and jnxBgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452." REFERENCE "RFC 2012 - SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2. RFC 2542 - IP Version 6 Management Information Base for the Transmission Control Protocol." ::= { jnxBgpM2PeerEntry 12 } jnxBgpM2PeerRemoteAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The remote autonomous system number." ::= { jnxBgpM2PeerEntry 13 } jnxBgpM2PeerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the remote peer entry in the jnxBgpM2PeerTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerIndex row instance values across rows of the jnxBgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the jnxBgpM2PeerTable that comes up while this row still exists will re-utilize the same row." ::= { jnxBgpM2PeerEntry 14 } jnxBgpM2PeerRoutingInstance OBJECT-TYPE -- *** JNX *** SYNTAX Unsigned32 -- *** JNX *** MAX-ACCESS read-only -- *** JNX *** STATUS current -- *** JNX *** DESCRIPTION -- *** JNX *** "Routing instance index." -- *** JNX *** ::= { jnxBgpM2PeerEntry 15 } -- *** JNX *** -- -- Errors -- jnxBgpM2PeerErrors OBJECT IDENTIFIER ::= { jnxBgpM2Peer 2 } jnxBgpM2PeerErrorsTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerErrorsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its jnxBgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session." ::= { jnxBgpM2PeerErrors 1 } jnxBgpM2PeerErrorsEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerErrorsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about errors sent and received for a particular BGP peer." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerErrorsTable 1 } JnxBgpM2PeerErrorsEntry ::= SEQUENCE { jnxBgpM2PeerLastErrorReceived OCTET STRING, jnxBgpM2PeerLastErrorSent OCTET STRING, jnxBgpM2PeerLastErrorReceivedTime TimeTicks, jnxBgpM2PeerLastErrorSentTime TimeTicks, jnxBgpM2PeerLastErrorReceivedText SnmpAdminString, jnxBgpM2PeerLastErrorSentText SnmpAdminString, jnxBgpM2PeerLastErrorReceivedData OCTET STRING, jnxBgpM2PeerLastErrorSentData OCTET STRING } jnxBgpM2PeerLastErrorReceived OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 1 } jnxBgpM2PeerLastErrorSent OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 2 } jnxBgpM2PeerLastErrorReceivedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp that the last NOTIFICATION was received from this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 3 } jnxBgpM2PeerLastErrorSentTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp that the last NOTIFICATION was sent to this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 4 } jnxBgpM2PeerLastErrorReceivedText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an implementation specific explanation of the error that was reported." ::= { jnxBgpM2PeerErrorsEntry 5 } jnxBgpM2PeerLastErrorSentText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an implementation specific explanation of the error that is being reported." ::= { jnxBgpM2PeerErrorsEntry 6 } jnxBgpM2PeerLastErrorReceivedData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4075)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code's data seen by this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 7 } jnxBgpM2PeerLastErrorSentData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4075)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last error code's data sent to this peer." REFERENCE "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" ::= { jnxBgpM2PeerErrorsEntry 8 } -- -- Peer Authentication -- jnxBgpM2PeerAuthentication OBJECT IDENTIFIER ::= { jnxBgpM2Peer 3 } jnxBgpM2PeerAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP peer authentication table. This table contains, one entry per BGP peer, information about the authentication with BGP peers." ::= { jnxBgpM2PeerAuthentication 1 } jnxBgpM2PeerAuthEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about the authentication with a BGP peer." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerAuthTable 1 } JnxBgpM2PeerAuthEntry ::= SEQUENCE { jnxBgpM2PeerAuthSent TruthValue, jnxBgpM2PeerAuthSentCode Unsigned32, jnxBgpM2PeerAuthSentValue OCTET STRING, jnxBgpM2PeerAuthRcvd TruthValue, jnxBgpM2PeerAuthRcvdCode Unsigned32, jnxBgpM2PeerAuthRcvdValue OCTET STRING } jnxBgpM2PeerAuthSent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The local peer has sent authentication information to the remote peer in the BGP Authentication field." ::= { jnxBgpM2PeerAuthEntry 1 } jnxBgpM2PeerAuthSentCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The code of the authentication information sent to the remote peer." ::= { jnxBgpM2PeerAuthEntry 2 } jnxBgpM2PeerAuthSentValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "The payload of the authentication information from the remote peer." ::= { jnxBgpM2PeerAuthEntry 3 } jnxBgpM2PeerAuthRcvd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The local peer has received authentication information from the remote peer in the BGP Authentication field." ::= { jnxBgpM2PeerAuthEntry 4 } jnxBgpM2PeerAuthRcvdCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The code of the authentication information received from the remote peer." ::= { jnxBgpM2PeerAuthEntry 5 } jnxBgpM2PeerAuthRcvdValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..252)) MAX-ACCESS read-only STATUS current DESCRIPTION "The payload of the authentication information from the remote peer." ::= { jnxBgpM2PeerAuthEntry 6 } -- -- Peer Event Times -- jnxBgpM2PeerTimers OBJECT IDENTIFIER ::= { jnxBgpM2Peer 4 } jnxBgpM2PeerEventTimesTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerEventTimesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state." ::= { jnxBgpM2PeerTimers 1 } jnxBgpM2PeerEventTimesEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerEventTimesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains a set of statistics about time spent and events encountered in the peer session Established state." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerEventTimesTable 1 } JnxBgpM2PeerEventTimesEntry ::= SEQUENCE { jnxBgpM2PeerFsmEstablishedTime Gauge32, jnxBgpM2PeerInUpdatesElapsedTime Gauge32 } jnxBgpM2PeerFsmEstablishedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted." ::= { jnxBgpM2PeerEventTimesEntry 1 } jnxBgpM2PeerInUpdatesElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time jnxBgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state" ::= { jnxBgpM2PeerEventTimesEntry 2 } -- -- Peer Configured Timers -- jnxBgpM2PeerConfiguredTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerConfiguredTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per peer management data on BGP session timers." ::= { jnxBgpM2PeerTimers 2 } jnxBgpM2PeerConfiguredTimersEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerConfiguredTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to the current state of BGP timers on a given peering session." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerConfiguredTimersTable 1 } JnxBgpM2PeerConfiguredTimersEntry ::= SEQUENCE { jnxBgpM2PeerConnectRetryInterval Unsigned32, jnxBgpM2PeerHoldTimeConfigured Unsigned32, jnxBgpM2PeerKeepAliveConfigured Unsigned32, jnxBgpM2PeerMinASOrigInterval Unsigned32, jnxBgpM2PeerMinRouteAdverInterval Unsigned32 } jnxBgpM2PeerConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." ::= { jnxBgpM2PeerConfiguredTimersEntry 1 } jnxBgpM2PeerHoldTimeConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" ::= { jnxBgpM2PeerConfiguredTimersEntry 2 } jnxBgpM2PeerKeepAliveConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" ::= { jnxBgpM2PeerConfiguredTimersEntry 3 } jnxBgpM2PeerMinASOrigInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds." ::= { jnxBgpM2PeerConfiguredTimersEntry 4 } jnxBgpM2PeerMinRouteAdverInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds." ::= { jnxBgpM2PeerConfiguredTimersEntry 5 } -- -- Peer Negotiated Timers -- jnxBgpM2PeerNegotiatedTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerNegotiatedTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current values of per-peer timers which can be dynamically set in the jnxBgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from jnxBgpM2PeerConfiguredTimersTable row instances." ::= { jnxBgpM2PeerTimers 3 } jnxBgpM2PeerNegotiatedTimersEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerNegotiatedTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry reflects a value of the currently operational, negotiated timers as reflected in the JnxBgpM2PeerNegotiatedTimersEntry." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerNegotiatedTimersTable 1 } JnxBgpM2PeerNegotiatedTimersEntry ::= SEQUENCE { jnxBgpM2PeerHoldTime Unsigned32, jnxBgpM2PeerKeepAlive Unsigned32 } jnxBgpM2PeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and jnxBgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" ::= { jnxBgpM2PeerNegotiatedTimersEntry 1 } jnxBgpM2PeerKeepAlive OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with jnxBgpM2PeerHoldTime, it has the same proportion as what jnxBgpM2PeerKeepAliveConfigured has when compared with jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of jnxBgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state." REFERENCE "draft-ietf-idr-bgp4-17, Sec. 4.4" ::= { jnxBgpM2PeerNegotiatedTimersEntry 2 } -- -- Peer Capabilities -- jnxBgpM2PeerCapabilities OBJECT IDENTIFIER ::= { jnxBgpM2Peer 5 } -- -- Announced Capabilities -- jnxBgpM2PeerCapsAnnouncedTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerCapsAnnouncedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the capabilities that are supported for a given peer." ::= { jnxBgpM2PeerCapabilities 1 } jnxBgpM2PeerCapsAnnouncedEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerCapsAnnouncedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code" INDEX { jnxBgpM2PeerIndex, jnxBgpM2PeerCapAnnouncedCode, jnxBgpM2PeerCapAnnouncedIndex } ::= { jnxBgpM2PeerCapsAnnouncedTable 1 } JnxBgpM2PeerCapsAnnouncedEntry ::= SEQUENCE { jnxBgpM2PeerCapAnnouncedCode Unsigned32, jnxBgpM2PeerCapAnnouncedIndex Unsigned32, jnxBgpM2PeerCapAnnouncedValue OCTET STRING } jnxBgpM2PeerCapAnnouncedCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Capability Advertisement Capability Code." ::= { jnxBgpM2PeerCapsAnnouncedEntry 1 } jnxBgpM2PeerCapAnnouncedIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them." ::= { jnxBgpM2PeerCapsAnnouncedEntry 2 } jnxBgpM2PeerCapAnnouncedValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the announced capability." ::= { jnxBgpM2PeerCapsAnnouncedEntry 3 } -- -- Received Capabilities -- jnxBgpM2PeerCapsReceivedTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the capabilities that are supported for a given peer." ::= { jnxBgpM2PeerCapabilities 2 } jnxBgpM2PeerCapsReceivedEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** MAX-ACCESS not-accessible STATUS current DESCRIPTION "These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code" INDEX { jnxBgpM2PeerIndex, jnxBgpM2PeerCapReceivedCode, jnxBgpM2PeerCapReceivedIndex } ::= { jnxBgpM2PeerCapsReceivedTable 1 } JnxBgpM2PeerCapsReceivedEntry ::= SEQUENCE { -- *** JNX *** jnxBgpM2PeerCapReceivedCode Unsigned32, jnxBgpM2PeerCapReceivedIndex Unsigned32, jnxBgpM2PeerCapReceivedValue OCTET STRING } jnxBgpM2PeerCapReceivedCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP Capability Advertisement Capability Code." ::= { jnxBgpM2PeerCapsReceivedEntry 1 } jnxBgpM2PeerCapReceivedIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them." ::= { jnxBgpM2PeerCapsReceivedEntry 2 } jnxBgpM2PeerCapReceivedValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the announced capability." ::= { jnxBgpM2PeerCapsReceivedEntry 3 } -- -- Per-peer counters -- jnxBgpM2PeerCounters OBJECT IDENTIFIER ::= { jnxBgpM2Peer 6 } jnxBgpM2PeerCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The counters associated with a BGP Peer." ::= { jnxBgpM2PeerCounters 1 } jnxBgpM2PeerCountersEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session." AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerCountersTable 1 } JnxBgpM2PeerCountersEntry ::= SEQUENCE { jnxBgpM2PeerInUpdates Counter32, jnxBgpM2PeerOutUpdates Counter32, jnxBgpM2PeerInTotalMessages Counter32, jnxBgpM2PeerOutTotalMessages Counter32, jnxBgpM2PeerFsmEstablishedTrans Counter32 } -- +++wayne need to describe what happens if connection is broken -- and then reestablished. Does the prior counter value accumulate? jnxBgpM2PeerInUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established." ::= { jnxBgpM2PeerCountersEntry 1 } jnxBgpM2PeerOutUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established." ::= { jnxBgpM2PeerCountersEntry 2 } jnxBgpM2PeerInTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { jnxBgpM2PeerCountersEntry 3 } jnxBgpM2PeerOutTotalMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established." ::= { jnxBgpM2PeerCountersEntry 4 } jnxBgpM2PeerFsmEstablishedTrans OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the BGP FSM transitioned into the established state for this peer." ::= { jnxBgpM2PeerCountersEntry 5 } -- -- Per-Peer Prefix Counters -- jnxBgpM2PrefixCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PrefixCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional per-peer, per AFI SAFI counters for prefixes" ::= { jnxBgpM2PeerCounters 2 } jnxBgpM2PrefixCountersEntry OBJECT-TYPE SYNTAX JnxBgpM2PrefixCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a bgp-peers prefix counters." INDEX { jnxBgpM2PeerIndex, jnxBgpM2PrefixCountersAfi, jnxBgpM2PrefixCountersSafi } ::= { jnxBgpM2PrefixCountersTable 1 } JnxBgpM2PrefixCountersEntry ::= SEQUENCE { jnxBgpM2PrefixCountersAfi InetAddressType, jnxBgpM2PrefixCountersSafi JnxBgpM2Safi, jnxBgpM2PrefixInPrefixes Gauge32, jnxBgpM2PrefixInPrefixesAccepted Gauge32, jnxBgpM2PrefixInPrefixesRejected Gauge32, jnxBgpM2PrefixOutPrefixes Gauge32, jnxBgpM2PrefixInPrefixesActive Gauge32 } jnxBgpM2PrefixCountersAfi OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The AFI index of the per-peer, per prefix counters" ::= { jnxBgpM2PrefixCountersEntry 1 } jnxBgpM2PrefixCountersSafi OBJECT-TYPE SYNTAX JnxBgpM2Safi MAX-ACCESS read-only STATUS current DESCRIPTION "The SAFI index of the per-peer, per prefix counters" ::= { jnxBgpM2PrefixCountersEntry 2 } jnxBgpM2PrefixInPrefixes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer." -- jmh - note that we are allowing stuff to be discarded ::= { jnxBgpM2PrefixCountersEntry 7 } jnxBgpM2PrefixInPrefixesAccepted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib." ::= { jnxBgpM2PrefixCountersEntry 8 } jnxBgpM2PrefixInPrefixesRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib." ::= { jnxBgpM2PrefixCountersEntry 9 } jnxBgpM2PrefixOutPrefixes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out." ::= { jnxBgpM2PrefixCountersEntry 10 } jnxBgpM2PrefixInPrefixesActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of prefixes for a peer that are installed in the Adj-Ribs-In and are the active route in the Loc-Rib." ::= { jnxBgpM2PrefixCountersEntry 11 } jnxBgpM2PeerExtensions OBJECT IDENTIFIER ::= { jnxBgpM2Peer 7 } jnxBgpM2PeerNonCapExts OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 1 } jnxBgpM2PeerCapExts OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 2 } -- -- Peer Route Reflection Extensions -- jnxBgpM2PeerRouteReflectionExts OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 2796 } jnxBgpM2PeerReflectorClientTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of route reflection client settings on a per-peer basis." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2PeerRouteReflectionExts 1 } jnxBgpM2PeerReflectorClientEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client." REFERENCE "RFC 2796 - BGP Route Reflection" AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerReflectorClientTable 1 } JnxBgpM2PeerReflectorClientEntry ::= SEQUENCE { jnxBgpM2PeerReflectorClient INTEGER } jnxBgpM2PeerReflectorClient OBJECT-TYPE SYNTAX INTEGER { nonClient(0), client(1), meshedClient(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2PeerReflectorClientEntry 1 } -- -- Peer AS Confederations Extensions -- jnxBgpM2PeerASConfederationExts OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 3065 } jnxBgpM2PeerConfedMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of confederation member settings on a per-peer basis." REFERENCE "RFC 3065 - BGP Confederations" ::= { jnxBgpM2PeerASConfederationExts 1 } jnxBgpM2PeerConfedMemberEntry OBJECT-TYPE SYNTAX JnxBgpM2PeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member." REFERENCE "RFC 3065 - BGP Confederations" AUGMENTS { jnxBgpM2PeerEntry } ::= { jnxBgpM2PeerConfedMemberTable 1 } JnxBgpM2PeerConfedMemberEntry ::= SEQUENCE { jnxBgpM2PeerConfedMember TruthValue } jnxBgpM2PeerConfedMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the given peer is in our confederation or not." REFERENCE "RFC 3065 - BGP Confederations" ::= { jnxBgpM2PeerConfedMemberEntry 1 } -- -- Peer configuration objects -- jnxBgpM2PeerConfiguration OBJECT IDENTIFIER ::= { jnxBgpM2Peer 8 } -- -- Administering activated peering sessions -- jnxBgpM2CfgPeerAdminStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAdminStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing rows for administratively starting and stopping peering sessions." ::= { jnxBgpM2PeerConfiguration 1 } jnxBgpM2CfgPeerAdminStatusEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerAdminStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing row for administratively starting and stopping peers." INDEX { jnxBgpM2PeerIndex } ::= { jnxBgpM2CfgPeerAdminStatusTable 1 } JnxBgpM2CfgPeerAdminStatusEntry ::= SEQUENCE { jnxBgpM2CfgPeerAdminStatus INTEGER } jnxBgpM2CfgPeerAdminStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the Manual Stop and Manual Start events to be sent to an activated peering session." ::= { jnxBgpM2CfgPeerAdminStatusEntry 1 } -- -- Peer Configuration -- jnxBgpM2CfgPeerNextIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to use as an index for creation of a row instance in in the jnxBgpM2CfgPeerTable. If the number of available entries in the jnxBgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of jnxBgpM2CfgPeerTable row creation at the time of jnxBgpM2CfgPeerNextIndex retrieval." ::= { jnxBgpM2PeerConfiguration 2 } jnxBgpM2CfgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table." ::= { jnxBgpM2PeerConfiguration 3 } jnxBgpM2CfgPeerEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information set up by a management entity to configure a connection with a BGP peer." INDEX { jnxBgpM2CfgPeerIndex } ::= { jnxBgpM2CfgPeerTable 1 } JnxBgpM2CfgPeerEntry ::= SEQUENCE { jnxBgpM2CfgPeerConfiguredVersion Unsigned32, jnxBgpM2CfgAllowVersionNegotiation TruthValue, jnxBgpM2CfgPeerLocalAddrType InetAddressType, jnxBgpM2CfgPeerLocalAddr InetAddress, jnxBgpM2CfgPeerLocalAs InetAutonomousSystemNumber, jnxBgpM2CfgPeerRemoteAddrType InetAddressType, jnxBgpM2CfgPeerRemoteAddr InetAddress, jnxBgpM2CfgPeerRemotePort Integer32, jnxBgpM2CfgPeerRemoteAs InetAutonomousSystemNumber, jnxBgpM2CfgPeerEntryStorageType StorageType, jnxBgpM2CfgPeerError INTEGER, jnxBgpM2CfgPeerBgpPeerEntry RowPointer, jnxBgpM2CfgPeerRowEntryStatus RowStatus, jnxBgpM2CfgPeerIndex Integer32, jnxBgpM2CfgPeerStatus INTEGER, jnxBgpM2CfgPeerRoutingInstance -- *** JNX *** Unsigned32 -- *** JNX *** } jnxBgpM2CfgPeerConfiguredVersion OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of jnxBgpM2CfgAllowVersionNegotiation." DEFVAL { 4 } ::= { jnxBgpM2CfgPeerEntry 1 } jnxBgpM2CfgAllowVersionNegotiation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to true, during session establishment with this peer, negotiation to a version lower than that specified in jnxBgpM2CfgPeerConfiguredVersion will be allowed." DEFVAL { false } ::= { jnxBgpM2CfgPeerEntry 2 } jnxBgpM2CfgPeerLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address family of the speakers of this BGP session." ::= { jnxBgpM2CfgPeerEntry 3 } jnxBgpM2CfgPeerLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local end of the peering session." ::= { jnxBgpM2CfgPeerEntry 4 } jnxBgpM2CfgPeerLocalAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of jnxBgpM2CfgLocalAs." DEFVAL { 0 } ::= { jnxBgpM2CfgPeerEntry 5 } jnxBgpM2CfgPeerRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address family of the speakers of the remote BGP session." ::= { jnxBgpM2CfgPeerEntry 6 } jnxBgpM2CfgPeerRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the remote end (destination address of peer) for peering session." ::= { jnxBgpM2CfgPeerEntry 7 } jnxBgpM2CfgPeerRemotePort OBJECT-TYPE SYNTAX Integer32 (-1 | 0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the remote port for the transport connection between the BGP peers. In the case of a transport for which the notion of port is irrelevant, the value of -1 can be defaulted or set." DEFVAL { -1 } ::= { jnxBgpM2CfgPeerEntry 8 } jnxBgpM2CfgPeerRemoteAs OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous system number of the remote peer." ::= { jnxBgpM2CfgPeerEntry 9 } jnxBgpM2CfgPeerEntryStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object type specifies the intended storage type for the jnxBgpM2CfgPeerEntry row instance." ::= { jnxBgpM2CfgPeerEntry 10 } jnxBgpM2CfgPeerError OBJECT-TYPE SYNTAX INTEGER { unknown(0), notActivated (1), errDuplicatePeeringSession (2), activated (3) -- +++wayne more to follow } MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, jnxBgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr, jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the jnxBgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the jnxBgpM2PeerTable row instance (as reflected through jnxBgpM2CfgPeerPeerEntry) associated with this row instance." ::= { jnxBgpM2CfgPeerEntry 11 } jnxBgpM2CfgPeerBgpPeerEntry OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "Upon activation of the session data contained in this row instance, this object points to an instance of a row within the jnxBgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of jnxBgpM2CfgPeerError which is activated (3)." ::= { jnxBgpM2CfgPeerEntry 12 } jnxBgpM2CfgPeerRowEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object type is used to control creation, activation, and deletion of this row instance." -- +++wayne need better directions for agent auto-removal -- of row instances which have moved to active or error -- state ::= { jnxBgpM2CfgPeerEntry 13 } jnxBgpM2CfgPeerIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible -- *** JNX *** STATUS current DESCRIPTION "Uniquely identifies an instance of a peer row, as an element of configuration." ::= { jnxBgpM2CfgPeerEntry 14 } jnxBgpM2CfgPeerStatus OBJECT-TYPE SYNTAX INTEGER { halted(1), running(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated." ::= { jnxBgpM2CfgPeerEntry 15 } jnxBgpM2CfgPeerRoutingInstance OBJECT-TYPE -- *** JNX *** SYNTAX Unsigned32 -- *** JNX *** MAX-ACCESS read-create -- *** JNX *** STATUS current -- *** JNX *** DESCRIPTION -- *** JNX *** "Routing instance index." -- *** JNX *** ::= { jnxBgpM2CfgPeerEntry 16 } -- *** JNX *** -- -- Per-peer authentication table. -- jnxBgpM2CfgPeerAuthTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contain per peer configuration for BGP Authentication." ::= { jnxBgpM2PeerConfiguration 4 } jnxBgpM2CfgPeerAuthEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerAuthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a peer's BGP Authentication configuration." AUGMENTS { jnxBgpM2CfgPeerEntry } ::= { jnxBgpM2CfgPeerAuthTable 1 } JnxBgpM2CfgPeerAuthEntry ::= SEQUENCE { jnxBgpM2CfgPeerAuthEnabled TruthValue, jnxBgpM2CfgPeerAuthCode Unsigned32, jnxBgpM2CfgPeerAuthValue OCTET STRING } jnxBgpM2CfgPeerAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This value is true if BGP Authentication is enabled for this peer. This is the authentication mechanism documented in the base BGP specification, not the MD5 session protection mechanism." DEFVAL { false } ::= { jnxBgpM2CfgPeerAuthEntry 1 } jnxBgpM2CfgPeerAuthCode OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication code for the BGP Authentication mechanism." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a" ::= { jnxBgpM2CfgPeerAuthEntry 2 } jnxBgpM2CfgPeerAuthValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..252)) MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication payload for the BGP authentication mechanism. This value has semantic meaning within the context of the authentication code." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a" ::= { jnxBgpM2CfgPeerAuthEntry 3 } -- -- Per-peer timers table -- jnxBgpM2CfgPeerTimersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for configuration of per-peer timers." ::= { jnxBgpM2PeerConfiguration 5 } jnxBgpM2CfgPeerTimersEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerTimersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing per-peer timer configuration." AUGMENTS { jnxBgpM2CfgPeerEntry } ::= { jnxBgpM2CfgPeerTimersTable 1 } JnxBgpM2CfgPeerTimersEntry ::= SEQUENCE { jnxBgpM2CfgPeerConnectRetryInterval Unsigned32, jnxBgpM2CfgPeerHoldTimeConfigured Unsigned32, jnxBgpM2CfgPeerKeepAliveConfigured Unsigned32, jnxBgpM2CfgPeerMinASOrigInterval Unsigned32, jnxBgpM2CfgPeerMinRouteAdverInter Unsigned32 } jnxBgpM2CfgPeerConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds." DEFVAL { 120 } ::= { jnxBgpM2CfgPeerTimersEntry 1 } jnxBgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 3..65535 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" DEFVAL { 90 } ::= { jnxBgpM2CfgPeerTimersEntry 2 } jnxBgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 1..21845 ) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in jnxBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by jnxBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of jnxBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds." REFERENCE "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" DEFVAL { 30 } ::= { jnxBgpM2CfgPeerTimersEntry 3 } jnxBgpM2CfgPeerMinASOrigInterval OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds." DEFVAL { 15 } ::= { jnxBgpM2CfgPeerTimersEntry 4 } jnxBgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds." DEFVAL { 30 } ::= { jnxBgpM2CfgPeerTimersEntry 5 } -- -- Per-peer configuration extensions -- jnxBgpM2CfgPeerExtensions OBJECT IDENTIFIER ::= { jnxBgpM2PeerConfiguration 6 } jnxBgpM2CfgPeerNonCapExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 1 } jnxBgpM2CfgPeerCapExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 2 } -- -- Peer route reflection configuration -- jnxBgpM2CfgPeerRouteReflectionExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 2796 } jnxBgpM2CfgPeerReflectorClientTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of route reflection client settings on a per-peer basis." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2CfgPeerRouteReflectionExts 1 } jnxBgpM2CfgPeerReflectorClientEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerReflectorClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client." REFERENCE "RFC 2796 - BGP Route Reflection" AUGMENTS { jnxBgpM2CfgPeerEntry } ::= { jnxBgpM2CfgPeerReflectorClientTable 1 } JnxBgpM2CfgPeerReflectorClientEntry ::= SEQUENCE { jnxBgpM2CfgPeerReflectorClient INTEGER } jnxBgpM2CfgPeerReflectorClient OBJECT-TYPE SYNTAX INTEGER { nonClient(0), client(1), meshedClient(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2CfgPeerReflectorClientEntry 1 } -- -- Peer AS Confederations Extensions -- jnxBgpM2CfgPeerASConfederationExts OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 3065 } jnxBgpM2CfgPeerConfedMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2CfgPeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of confederation member settings on a per-peer basis." REFERENCE "RFC 3065 - BGP Confederations" ::= { jnxBgpM2CfgPeerASConfederationExts 1 } jnxBgpM2CfgPeerConfedMemberEntry OBJECT-TYPE SYNTAX JnxBgpM2CfgPeerConfedMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member." REFERENCE "RFC 3065 - BGP Confederations" AUGMENTS { jnxBgpM2CfgPeerEntry -- *** JNX *** } ::= { jnxBgpM2CfgPeerConfedMemberTable 1 } JnxBgpM2CfgPeerConfedMemberEntry ::= SEQUENCE { jnxBgpM2CfgPeerConfedMember TruthValue } jnxBgpM2CfgPeerConfedMember OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates whether the given peer is in our confederation or not." REFERENCE "RFC 3065 - BGP Confederations" ::= { jnxBgpM2CfgPeerConfedMemberEntry 1 } -- -- BGP NLRI Data -- jnxBgpM2Rib OBJECT IDENTIFIER ::= { jnxBgpM2 3 } -- -- NLRI Table -- jnxBgpM2NlriTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2NlriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where jnxBgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In." ::= { jnxBgpM2Rib 1 } jnxBgpM2NlriEntry OBJECT-TYPE SYNTAX JnxBgpM2NlriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a path to a network." INDEX { jnxBgpM2PeerIndex, jnxBgpM2NlriAfi, jnxBgpM2NlriSafi, jnxBgpM2NlriPrefix, jnxBgpM2NlriPrefixLen, jnxBgpM2NlriIndex } ::= { jnxBgpM2NlriTable 1 } JnxBgpM2NlriEntry ::= SEQUENCE { jnxBgpM2NlriIndex Unsigned32, jnxBgpM2NlriAfi InetAddressType, jnxBgpM2NlriSafi JnxBgpM2Safi, jnxBgpM2NlriPrefix InetAddress, jnxBgpM2NlriPrefixLen InetAddressPrefixLength, jnxBgpM2NlriBest TruthValue, jnxBgpM2NlriCalcLocalPref Unsigned32, jnxBgpM2PathAttrIndex Unsigned32, jnxBgpM2NlriOpaqueType INTEGER, jnxBgpM2NlriOpaquePointer RowPointer } jnxBgpM2NlriIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP." REFERENCE "RFC 3107 - Carrying Label Information in BGP-4" ::= { jnxBgpM2NlriEntry 1 } jnxBgpM2NlriAfi OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the prefix for this NLRI." ::= { jnxBgpM2NlriEntry 2 } jnxBgpM2NlriSafi OBJECT-TYPE SYNTAX JnxBgpM2Safi MAX-ACCESS read-only STATUS current DESCRIPTION "The subsequent address family of the prefix for this NLRI" REFERENCE "RFC 2858 - Multiprotocol Extensions for BGP-4" ::= { jnxBgpM2NlriEntry 3 } jnxBgpM2NlriPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by jnxBgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by jnxBgpM2PathAttrAddrPrefixLen are zeroed." ::= { jnxBgpM2NlriEntry 4 } jnxBgpM2NlriPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "Length in bits of the address prefix in the Network Layer Reachability Information field." ::= { jnxBgpM2NlriEntry 5 } jnxBgpM2NlriBest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether or not this route was chosen as the best BGP4 route." ::= { jnxBgpM2NlriEntry 6 } jnxBgpM2NlriCalcLocalPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The degree of preference calculated by the receiving BGP4 speaker for an advertised route." ::= { jnxBgpM2NlriEntry 7 } jnxBgpM2PathAttrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the per-NLRI entry in the jnxBgpM2PeerAttrTable. It is assigned by the agent at the point of creation of the jnxBgpM2PeerAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2PeerAttrIndex row instance values across rows of the jnxBgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI." ::= { jnxBgpM2NlriEntry 8 } jnxBgpM2NlriOpaqueType OBJECT-TYPE SYNTAX INTEGER { none(0), bgpMplsLabelStack(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object enumerates the type of the row that is pointed to in the table row jnxBgpM2NlriOpaquePointer instance, if jnxBgpM2NlriOpaquePointer is in fact not a zero length. jnxBgpM2NlriOpaqueType is necessary since the data referenced by jnxBgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of jnxBgpM2NlriOpaqueType would be bgpMplsLabelStack(1)." REFERENCE "RFC 3107 - Carrying Label Information in BGP-4 draft-ietf-mpls-lsr-mib-08.txt" ::= { jnxBgpM2NlriEntry 9 } jnxBgpM2NlriOpaquePointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if jnxBgpM2NlriOpaqueType is none." ::= { jnxBgpM2NlriEntry 10 } -- -- Adj-Ribs-Out Table -- jnxBgpM2AdjRibsOutTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2AdjRibsOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains on a per-peer basis one or more routes from the jnxBgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 3.2" ::= { jnxBgpM2Rib 2 } jnxBgpM2AdjRibsOutEntry OBJECT-TYPE SYNTAX JnxBgpM2AdjRibsOutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of BGP routes that have been placed into a peer's Adj-Ribs-Out." INDEX { jnxBgpM2PeerIndex, jnxBgpM2NlriAfi, jnxBgpM2NlriSafi, jnxBgpM2NlriPrefix, jnxBgpM2NlriPrefixLen, jnxBgpM2AdjRibsOutIndex } ::= { jnxBgpM2AdjRibsOutTable 1 } JnxBgpM2AdjRibsOutEntry ::= SEQUENCE { jnxBgpM2AdjRibsOutIndex Unsigned32, jnxBgpM2AdjRibsOutRoute RowPointer } jnxBgpM2AdjRibsOutIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them." ::= { jnxBgpM2AdjRibsOutEntry 1 } jnxBgpM2AdjRibsOutRoute OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object points to the route in the jnxBgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.2" ::= { jnxBgpM2AdjRibsOutEntry 2 } -- -- BGP Rib Path Attributes Table -- -- -- Path Attribute Counter -- jnxBgpM2PathAttrCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the jnxBgpM2PathAttrTable." ::= { jnxBgpM2Rib 3 } -- -- Path Attributes Table -- jnxBgpM2PathAttrTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides per advertised network-prefix attribute data, as advertised over a peering session." ::= { jnxBgpM2Rib 4 } jnxBgpM2PathAttrEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains data about a given network prefix, per-prefix and per-advertising peer." INDEX { jnxBgpM2PathAttrIndex } ::= { jnxBgpM2PathAttrTable 1 } JnxBgpM2PathAttrEntry ::= SEQUENCE { jnxBgpM2PathAttrOrigin INTEGER, jnxBgpM2PathAttrNextHopAddrType InetAddressType, jnxBgpM2PathAttrNextHop InetAddress, jnxBgpM2PathAttrMedPresent TruthValue, jnxBgpM2PathAttrMed Unsigned32, jnxBgpM2PathAttrLocalPrefPresent TruthValue, jnxBgpM2PathAttrLocalPref Unsigned32, jnxBgpM2PathAttrAtomicAggregate INTEGER, jnxBgpM2PathAttrAggregatorAS InetAutonomousSystemNumber, jnxBgpM2PathAttrAggregatorAddr JnxBgpM2Identifier, jnxBgpM2AsPathCalcLength Unsigned32, jnxBgpM2AsPathString SnmpAdminString, jnxBgpM2AsPathIndex Unsigned32 } jnxBgpM2PathAttrOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1),-- networks are interior egp(2),-- networks learned via the EGP protocol incomplete(3) -- undetermined } MAX-ACCESS read-only STATUS current DESCRIPTION "The ultimate origin of the path information." ::= { jnxBgpM2PathAttrEntry 1 } jnxBgpM2PathAttrNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address family of the address for the border router that should be used to access the destination network." ::= { jnxBgpM2PathAttrEntry 2 } jnxBgpM2PathAttrNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. jnxBgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , jnxBgpM2LinkLocalNextHopPresent will be false and jnxBgpM2PathAttrNextHop will contain the link local nexthop." ::= { jnxBgpM2PathAttrEntry 3 } jnxBgpM2PathAttrMedPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the MED value is present. If it is not present, the jnxBgpM2PathAttrMed object has no useful value and should be set to 0." ::= { jnxBgpM2PathAttrEntry 4 } jnxBgpM2PathAttrMed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This metric is used to discriminate between multiple exit points to an adjacent autonomous system." ::= { jnxBgpM2PathAttrEntry 5 } jnxBgpM2PathAttrLocalPrefPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not the LocalPref value is present. If it is not present, the jnxBgpM2PathAttrLocalPref object has no useful value and should be set to 0." ::= { jnxBgpM2PathAttrEntry 6 } jnxBgpM2PathAttrLocalPref OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The originating BGP4 speakers degree of preference for an advertised route." ::= { jnxBgpM2PathAttrEntry 7 } jnxBgpM2PathAttrAtomicAggregate OBJECT-TYPE SYNTAX INTEGER { atomicAggregatePresent(1), atomicAggregateMissing(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific." ::= { jnxBgpM2PathAttrEntry 8 } jnxBgpM2PathAttrAggregatorAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet." ::= { jnxBgpM2PathAttrEntry 9 } jnxBgpM2PathAttrAggregatorAddr OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute." ::= { jnxBgpM2PathAttrEntry 10 } jnxBgpM2AsPathCalcLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" ::= { jnxBgpM2PathAttrEntry 11 } jnxBgpM2AsPathString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability." ::= { jnxBgpM2PathAttrEntry 12 } jnxBgpM2AsPathIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable." ::= { jnxBgpM2PathAttrEntry 13 } -- -- As-4 byte AS_PATH -- jnxBgpM2AsPath4byteTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2AsPath4byteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space." REFERENCE "draft-ietf-idr-as4bytes-04.txt - BGP support for four-octet AS number space" ::= { jnxBgpM2Rib 5 } jnxBgpM2AsPath4byteEntry OBJECT-TYPE SYNTAX JnxBgpM2AsPath4byteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes." AUGMENTS { jnxBgpM2PathAttrEntry } ::= { jnxBgpM2AsPath4byteTable 1 } JnxBgpM2AsPath4byteEntry ::= SEQUENCE { jnxBgpM2AsPath4bytePathPresent TruthValue, jnxBgpM2AsPath4byteAggregatorAS InetAutonomousSystemNumber, jnxBgpM2AsPath4byteCalcLength Unsigned32, jnxBgpM2AsPath4byteString SnmpAdminString, jnxBgpM2AsPath4byteIndex Unsigned32 } jnxBgpM2AsPath4bytePathPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: jnxBgpM2PathAttrAggregatorAS - zero (0). jnxBgpM2AsPathCalcLength - zero (0). jnxBgpM2AsPathString - zero (0) length string. jnxBgpM2AsPathIndex - zero (0)." ::= { jnxBgpM2AsPath4byteEntry 1 } jnxBgpM2AsPath4byteAggregatorAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet." ::= { jnxBgpM2AsPath4byteEntry 2 } jnxBgpM2AsPath4byteCalcLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection." REFERENCE "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" ::= { jnxBgpM2AsPath4byteEntry 3 } jnxBgpM2AsPath4byteString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability." ::= { jnxBgpM2AsPath4byteEntry 4 } jnxBgpM2AsPath4byteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value is a unique index for the decomposed AS Path in the jnxBgpM2AsPathTable. It is assigned by the agent at the point of creation of the jnxBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of jnxBgpM2AsPathIndex row instance values across rows of the jnxBgpM2AsPathTable. " ::= { jnxBgpM2AsPath4byteEntry 5 } -- BGP 4 Path attribute AS Path Table. There is one row in -- this table for each AS which is advertised for a given -- route as provided from a peer. -- JMH -- We need one of these for the NewAsPath for the 4byte draft jnxBgpM2AsPathTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2AsPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer." ::= { jnxBgpM2Rib 6 } jnxBgpM2AsPathEntry OBJECT-TYPE -- *** JNX *** SYNTAX JnxBgpM2AsPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an AS path provided with a path to a network." INDEX { jnxBgpM2PathAttrIndex, jnxBgpM2AsPathSegmentIndex, jnxBgpM2AsPathElementIndex, jnxBgpM2AsPathElementValue } ::= { jnxBgpM2AsPathTable 1 } JnxBgpM2AsPathEntry ::= SEQUENCE { jnxBgpM2AsPathSegmentIndex Unsigned32, jnxBgpM2AsPathElementIndex Unsigned32, jnxBgpM2AsPathType INTEGER, jnxBgpM2AsPathElementValue InetAutonomousSystemNumber } jnxBgpM2AsPathSegmentIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of jnxBgpM2AsPathType, which should be the same value for each jnxBgpM2AsPathTable entry indexed by the same (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) pair)." ::= { jnxBgpM2AsPathEntry 1 } -- *** JNX *** jnxBgpM2AsPathElementIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path." ::= { jnxBgpM2AsPathEntry 2 } -- *** JNX *** jnxBgpM2AsPathType OBJECT-TYPE SYNTAX INTEGER { asSet(1), asSequence(2), confedSequence(3), confedSet(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (jnxBgpM2PathAttrIndex, jnxBgpM2AsPathIndex) index pair will have their jnxBgpM2AsPathType set to the same value. The values for jnxBgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document." REFERENCE "draft-ietf-idr-bgp4-16 RFC 3065 - BGP AS Confederations" ::= { jnxBgpM2AsPathEntry 3 } -- *** JNX *** jnxBgpM2AsPathElementValue OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by jnxBgpM2AsPathIndex and jnxBgpM2AsPathType (and, in sequence of the other table rows with the same value of jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex)." ::= { jnxBgpM2AsPathEntry 4 } -- *** JNX *** -- BGP 4 Path unknown attribute. There is one row in -- this table for each attribute not known by this BGP -- implementation (or agent instrumentation), but provided -- from a peer. jnxBgpM2PathAttrUnknownTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrUnknownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)." ::= { jnxBgpM2Rib 7 } jnxBgpM2PathAttrUnknownEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrUnknownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an unknown attribute provided with a path to a network." INDEX { jnxBgpM2PathAttrIndex, jnxBgpM2PathAttrUnknownIndex } ::= { jnxBgpM2PathAttrUnknownTable 1 } JnxBgpM2PathAttrUnknownEntry ::= SEQUENCE { jnxBgpM2PathAttrUnknownIndex Unsigned32, jnxBgpM2PathAttrUnknownType Unsigned32, jnxBgpM2PathAttrUnknownValue OCTET STRING } jnxBgpM2PathAttrUnknownIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index for a row in this table." ::= { jnxBgpM2PathAttrUnknownEntry 1 } jnxBgpM2PathAttrUnknownType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The attribute type advertised with this unknown attribute by the peer." ::= { jnxBgpM2PathAttrUnknownEntry 2 } -- Maximum size of the following is derived as -- 4096 max message size -- - 16 BGP message marker bytes -- - 2 BGP message size -- - 1 BGP message type (UPDATE with unknown attr) -- - 2 UPDATE routes length (even assuming no routes) -- - 2 UPDATE path attributes length -- - 1 path attribute flag octet -- - 2 unknown path attr type (in jnxBgpM2PathAttrUnknownType) -- --------- -- 4070 bytes maximum per-message attribute value data jnxBgpM2PathAttrUnknownValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4070)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object. " ::= { jnxBgpM2PathAttrUnknownEntry 3 } -- -- Path Attribute Extensions -- jnxBgpM2PathAttrExtensions OBJECT IDENTIFIER ::= { jnxBgpM2Rib 8 } jnxBgpM2PathAttrNonCapExts OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 1 } jnxBgpM2PathAttrCapExts OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 2 } -- -- Path Attribute Route Reflection Extensions -- -- -- Originator ID Table -- jnxBgpM2PathAttrRouteReflectionExts OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 2796 } jnxBgpM2PathAttrOriginatorIdTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrOriginatorIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Per prefix data pertinent to advertisement of a network prefix through an originator." REFERENCE "RFC 2796 - BGP Route Reflection" ::= { jnxBgpM2PathAttrRouteReflectionExts 1 } jnxBgpM2PathAttrOriginatorIdEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrOriginatorIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector." REFERENCE "RFC 2796 - BGP Route Reflection" INDEX { jnxBgpM2PathAttrIndex } ::= { jnxBgpM2PathAttrOriginatorIdTable 1 } JnxBgpM2PathAttrOriginatorIdEntry ::= SEQUENCE { jnxBgpM2PathAttrOriginatorId JnxBgpM2Identifier } jnxBgpM2PathAttrOriginatorId OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute." REFERENCE "This attribute is defined in [RFC2796]." ::= { jnxBgpM2PathAttrOriginatorIdEntry 1 } -- -- Cluster table -- jnxBgpM2PathAttrClusterTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)." ::= { jnxBgpM2PathAttrRouteReflectionExts 2 } jnxBgpM2PathAttrClusterEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrClusterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a cluster traversal provided with a path to a network." INDEX { jnxBgpM2PathAttrIndex, jnxBgpM2PathAttrClusterIndex } ::= { jnxBgpM2PathAttrClusterTable 1 } JnxBgpM2PathAttrClusterEntry ::= SEQUENCE { jnxBgpM2PathAttrClusterIndex Unsigned32, jnxBgpM2PathAttrClusterValue JnxBgpM2Identifier } jnxBgpM2PathAttrClusterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integral index for a row in this table." ::= { jnxBgpM2PathAttrClusterEntry 1 } jnxBgpM2PathAttrClusterValue OBJECT-TYPE SYNTAX JnxBgpM2Identifier MAX-ACCESS read-only STATUS current DESCRIPTION "A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of jnxBgpM2PathAttrClusterTable rows (and the jnxBgpM2PathAttrClusterValues in each row) as returned for a given jnxBgpM2PathAttrIndex value, and the monotonically increasing sequence of jnxBgpM2PathAttrClusterIndex values for that jnxBgpM2PathAttrIndex." REFERENCE "This attribute is defined in [RFC2796]." ::= { jnxBgpM2PathAttrClusterEntry 2 } -- -- BGP Communities -- jnxBgpM2PathAttrCommunityExts OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 1997 } jnxBgpM2PathAttrCommTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)." ::= { jnxBgpM2PathAttrCommunityExts 1 } jnxBgpM2PathAttrCommEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a community association provided with a path to a network." INDEX { jnxBgpM2PathAttrIndex, jnxBgpM2PathAttrCommIndex } ::= { jnxBgpM2PathAttrCommTable 1 } JnxBgpM2PathAttrCommEntry ::= SEQUENCE { jnxBgpM2PathAttrCommIndex Unsigned32, jnxBgpM2PathAttrCommValue JnxBgpM2Community } jnxBgpM2PathAttrCommIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index for a row in this table." ::= { jnxBgpM2PathAttrCommEntry 1 } jnxBgpM2PathAttrCommValue OBJECT-TYPE SYNTAX JnxBgpM2Community MAX-ACCESS read-only STATUS current DESCRIPTION "A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics." REFERENCE "RFC 1997 - BGP Communities Attribute" ::= { jnxBgpM2PathAttrCommEntry 2 } -- -- BGP Extended Communities -- jnxBgpM2PathAttrExtCommTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2PathAttrExtCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for jnxBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published." ::= { jnxBgpM2PathAttrNonCapExts 65001 } -- *** JNX *** jnxBgpM2PathAttrExtCommEntry OBJECT-TYPE SYNTAX JnxBgpM2PathAttrExtCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an extended community association provided with a path to a network." INDEX { jnxBgpM2PathAttrIndex, jnxBgpM2PathAttrExtCommIndex } ::= { jnxBgpM2PathAttrExtCommTable 1 } JnxBgpM2PathAttrExtCommEntry ::= SEQUENCE { jnxBgpM2PathAttrExtCommIndex Unsigned32, jnxBgpM2PathAttrExtCommValue JnxBgpM2ExtendedCommunity } jnxBgpM2PathAttrExtCommIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integral index for a row in this table." ::= { jnxBgpM2PathAttrExtCommEntry 1 } jnxBgpM2PathAttrExtCommValue OBJECT-TYPE SYNTAX JnxBgpM2ExtendedCommunity MAX-ACCESS read-only STATUS current DESCRIPTION "A value representing an extended community which was received with the route implied by the jnxBgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics." REFERENCE "BGP-EXTCOMM - BGP Extended Communities Attribute" ::= { jnxBgpM2PathAttrExtCommEntry 2 } -- -- RFC 2545 link local nexthop -- jnxBgpM2LinkLocalNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxBgpM2LinkLocalNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers." REFERENCE "RFC 2545 - Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain Routing" ::= { jnxBgpM2PathAttrNonCapExts 2545 } jnxBgpM2LinkLocalNextHopEntry OBJECT-TYPE SYNTAX JnxBgpM2LinkLocalNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops." INDEX { jnxBgpM2PathAttrIndex } ::= { jnxBgpM2LinkLocalNextHopTable 1 } JnxBgpM2LinkLocalNextHopEntry ::= SEQUENCE { jnxBgpM2LinkLocalNextHopPresent TruthValue, jnxBgpM2LinkLocalNextHop InetAddress } jnxBgpM2LinkLocalNextHopPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop." ::= { jnxBgpM2LinkLocalNextHopEntry 1 } jnxBgpM2LinkLocalNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if jnxBgpM2LinkLocalNextHopPresent is true." ::= { jnxBgpM2LinkLocalNextHopEntry 2 } -- -- Conformance Information -- jnxBgpM2Conformance OBJECT IDENTIFIER ::= { jnxBgpM2 4 } jnxBgpM2MIBCompliances OBJECT IDENTIFIER ::= { jnxBgpM2Conformance 1 } jnxBgpM2MIBGroups OBJECT IDENTIFIER ::= { jnxBgpM2Conformance 2 } jnxBgpM2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the BGP4 mib." MODULE -- this module MANDATORY-GROUPS { jnxBgpM2TimersGroup, jnxBgpM2CountersGroup, jnxBgpM2CapabilitiesGroup, -- *** JNX *** jnxBgpM2AsPathGroup, jnxBgpM2As4byteGroup, jnxBgpM2BaseGroup, jnxBgpM2ErrorsGroup, jnxBgpM2PeerGroup, jnxBgpM2PathAttributesGroup } GROUP jnxBgpM2MIBNotificationsGroup DESCRIPTION "The notifications group is completely optional, but highly recommended." GROUP jnxBgpM2AuthenticationGroup DESCRIPTION "The authentication group is mandatory only for those implementations which support sending and receiving authentication information with peers in the BGP Authentication Field." GROUP jnxBgpM2CommunitiesGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP community attribute." GROUP jnxBgpM2ExtCommunitiesGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP extended community attribute." GROUP jnxBgpM2RouteReflectionGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP route reflection relationships." GROUP jnxBgpM2AsConfederationGroup DESCRIPTION "The communities group is mandatory only for those which support the BGP confederation membership." -- *** JNX *** GROUP jnxBgpM2TimersGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2CountersGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2CapabilitiesGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2AsPathGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2As4byteGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2BaseGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2ErrorsGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2PeerGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." -- *** JNX *** GROUP jnxBgpM2PathAttributesGroup -- *** JNX *** DESCRIPTION -- *** JNX *** "This group is mandatory for all agent implementations." GROUP jnxBgpM2PeerConfigurationGroup DESCRIPTION "This group is optional for implementations that wish to support configuration via SNMP." GROUP jnxBgpM2PeerAuthConfigurationGroup DESCRIPTION "This group is optional for implementations that wish to support configuration of BGP authentication via SNMP. Implementation of this feature requires support of the jnxBgpM2PeerConfigurationGroup." GROUP jnxBgpM2PeerRouteReflectorCfgGroup DESCRIPTION "This group is optional for implementations that wish to support configuration of route reflection via SNMP. Implementation of this feature requires support of the jnxBgpM2PeerConfigurationGroup." GROUP jnxBgpM2PeerAsConfederationCfgGroup DESCRIPTION "This group is optional for implementations that wish to support configuration of BGP AS Confederations via SNMP. Implementation of this feature requires support of the jnxBgpM2PeerConfigurationGroup." GROUP jnxBgpM2Rfc2545Group DESCRIPTION "This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545." ::= { jnxBgpM2MIBCompliances 1 } jnxBgpM2AuthenticationGroup OBJECT-GROUP OBJECTS { jnxBgpM2SupportedAuthCode, jnxBgpM2SupportedAuthValue, jnxBgpM2PeerAuthSent, jnxBgpM2PeerAuthSentCode, jnxBgpM2PeerAuthSentValue, jnxBgpM2PeerAuthRcvd, jnxBgpM2PeerAuthRcvdCode, jnxBgpM2PeerAuthRcvdValue } STATUS current DESCRIPTION "Objects associated with BGP authentication." ::= { jnxBgpM2MIBGroups 1 } jnxBgpM2CommunitiesGroup OBJECT-GROUP OBJECTS { jnxBgpM2PathAttrCommIndex, jnxBgpM2PathAttrCommValue } STATUS current DESCRIPTION "Objects associated with BGP communities." ::= { jnxBgpM2MIBGroups 2 } jnxBgpM2ExtCommunitiesGroup OBJECT-GROUP OBJECTS { jnxBgpM2PathAttrExtCommIndex, jnxBgpM2PathAttrExtCommValue } STATUS current DESCRIPTION "Objects associated with BGP extended communities." ::= { jnxBgpM2MIBGroups 3 } jnxBgpM2RouteReflectionGroup OBJECT-GROUP OBJECTS { jnxBgpM2RouteReflector, jnxBgpM2ClusterId, jnxBgpM2PeerReflectorClient, jnxBgpM2PathAttrOriginatorId, jnxBgpM2PathAttrClusterIndex, jnxBgpM2PathAttrClusterValue } STATUS current DESCRIPTION "Objects associated with BGP route reflection." ::= { jnxBgpM2MIBGroups 4 } jnxBgpM2AsConfederationGroup OBJECT-GROUP OBJECTS { jnxBgpM2ConfederationRouter, jnxBgpM2ConfederationId, jnxBgpM2PeerConfedMember } STATUS current DESCRIPTION "Objects associated with BGP confederation membership." ::= { jnxBgpM2MIBGroups 5 } jnxBgpM2TimersGroup OBJECT-GROUP OBJECTS { jnxBgpM2PeerFsmEstablishedTime, jnxBgpM2PeerInUpdatesElapsedTime, jnxBgpM2PeerConnectRetryInterval, jnxBgpM2PeerHoldTimeConfigured, jnxBgpM2PeerKeepAliveConfigured, jnxBgpM2PeerMinASOrigInterval, jnxBgpM2PeerMinRouteAdverInterval, jnxBgpM2PeerHoldTime, jnxBgpM2PeerKeepAlive } STATUS current DESCRIPTION "Objects associated with BGP peering timers." ::= { jnxBgpM2MIBGroups 6 } jnxBgpM2CountersGroup OBJECT-GROUP OBJECTS { jnxBgpM2PeerInUpdates, jnxBgpM2PeerOutUpdates, jnxBgpM2PeerInTotalMessages, jnxBgpM2PeerOutTotalMessages, jnxBgpM2PeerFsmEstablishedTrans, jnxBgpM2PrefixCountersAfi, jnxBgpM2PrefixCountersSafi, jnxBgpM2PrefixInPrefixes, jnxBgpM2PrefixInPrefixesAccepted, jnxBgpM2PrefixInPrefixesRejected, jnxBgpM2PrefixOutPrefixes } STATUS current DESCRIPTION "Objects to count discrete events and exchanges on BGP sessions." ::= { jnxBgpM2MIBGroups 7 } jnxBgpM2CapabilitiesGroup OBJECT-GROUP OBJECTS { jnxBgpM2CapabilitySupportAvailable, jnxBgpM2SupportedCapabilityCode, jnxBgpM2SupportedCapability, jnxBgpM2PeerCapAnnouncedCode, jnxBgpM2PeerCapAnnouncedIndex, jnxBgpM2PeerCapAnnouncedValue, jnxBgpM2PeerCapReceivedCode, jnxBgpM2PeerCapReceivedIndex, jnxBgpM2PeerCapReceivedValue } STATUS current DESCRIPTION "Objects to report capabilities as received on BGP sessions." ::= { jnxBgpM2MIBGroups 8 } jnxBgpM2AsPathGroup OBJECT-GROUP OBJECTS { jnxBgpM2AsPathSegmentIndex, jnxBgpM2AsPathElementIndex, jnxBgpM2AsPathType, jnxBgpM2AsPathElementValue } STATUS current DESCRIPTION "Objects to report AS paths received on BGP NLRIs." ::= { jnxBgpM2MIBGroups 9 } jnxBgpM2As4byteGroup OBJECT-GROUP OBJECTS { jnxBgpM2AsSize, jnxBgpM2AsPath4bytePathPresent, jnxBgpM2AsPath4byteAggregatorAS, jnxBgpM2AsPath4byteCalcLength, jnxBgpM2AsPath4byteString, jnxBgpM2AsPath4byteIndex } STATUS current DESCRIPTION "AS Size objects." ::= { jnxBgpM2MIBGroups 10 } jnxBgpM2BaseGroup OBJECT-GROUP OBJECTS { jnxBgpM2LocalAs, jnxBgpM2LocalIdentifier, jnxBgpM2VersionIndex, jnxBgpM2VersionSupported } STATUS current DESCRIPTION "Basic objects in local BGP implementation." ::= { jnxBgpM2MIBGroups 11 } jnxBgpM2ErrorsGroup OBJECT-GROUP OBJECTS { jnxBgpM2PeerLastErrorReceived, jnxBgpM2PeerLastErrorReceivedData, jnxBgpM2PeerLastErrorReceivedTime, jnxBgpM2PeerLastErrorReceivedText, jnxBgpM2PeerLastErrorSent, jnxBgpM2PeerLastErrorSentData, jnxBgpM2PeerLastErrorSentTime, jnxBgpM2PeerLastErrorSentText } STATUS current DESCRIPTION "Errors received on BGP peering sessions." ::= { jnxBgpM2MIBGroups 12 } jnxBgpM2PeerGroup OBJECT-GROUP OBJECTS { jnxBgpM2PeerIdentifier, jnxBgpM2PeerState, jnxBgpM2PeerStatus, jnxBgpM2PeerConfiguredVersion, jnxBgpM2PeerNegotiatedVersion, jnxBgpM2PeerLocalAddrType, jnxBgpM2PeerLocalAddr, jnxBgpM2PeerLocalPort, jnxBgpM2PeerLocalAs, jnxBgpM2PeerRemoteAddrType, jnxBgpM2PeerRemoteAddr, jnxBgpM2PeerRemotePort, jnxBgpM2PeerRemoteAs, jnxBgpM2PeerRoutingInstance, -- *** JNX *** jnxBgpM2PeerIndex } STATUS current DESCRIPTION "Core object types on BGP peering sessions." ::= { jnxBgpM2MIBGroups 13 } jnxBgpM2PathAttributesGroup OBJECT-GROUP OBJECTS { jnxBgpM2PathAttrCount, jnxBgpM2AsPathCalcLength, jnxBgpM2AsPathElementValue, jnxBgpM2AsPathIndex, jnxBgpM2AsPathString, jnxBgpM2AsPathType, jnxBgpM2NlriAfi, jnxBgpM2NlriBest, jnxBgpM2NlriPrefix, jnxBgpM2NlriPrefixLen, jnxBgpM2NlriSafi, jnxBgpM2NlriOpaqueType, jnxBgpM2NlriOpaquePointer, jnxBgpM2NlriIndex, jnxBgpM2NlriCalcLocalPref, jnxBgpM2AdjRibsOutIndex, jnxBgpM2AdjRibsOutRoute, jnxBgpM2PathAttrAggregatorAS, jnxBgpM2PathAttrAggregatorAddr, jnxBgpM2PathAttrAtomicAggregate, jnxBgpM2PathAttrIndex, jnxBgpM2PathAttrLocalPref, jnxBgpM2PathAttrLocalPrefPresent, jnxBgpM2PathAttrMed, jnxBgpM2PathAttrMedPresent, jnxBgpM2PathAttrNextHop, jnxBgpM2PathAttrNextHopAddrType, jnxBgpM2PathAttrOrigin, jnxBgpM2PathAttrUnknownIndex, jnxBgpM2PathAttrUnknownType, jnxBgpM2PathAttrUnknownValue } STATUS current DESCRIPTION "Attributes received on BGP peering sessions." ::= { jnxBgpM2MIBGroups 14 } jnxBgpM2PeerConfigurationGroup OBJECT-GROUP OBJECTS { jnxBgpM2CfgBaseScalarStorageType, jnxBgpM2CfgLocalAs, jnxBgpM2CfgLocalIdentifier, jnxBgpM2CfgPeerAdminStatus, jnxBgpM2CfgPeerNextIndex, jnxBgpM2CfgPeerConfiguredVersion, jnxBgpM2CfgAllowVersionNegotiation, jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr, jnxBgpM2CfgPeerLocalAs, jnxBgpM2CfgPeerRemoteAddrType, jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort, jnxBgpM2CfgPeerRemoteAs, jnxBgpM2CfgPeerEntryStorageType, jnxBgpM2CfgPeerError, jnxBgpM2CfgPeerBgpPeerEntry, jnxBgpM2CfgPeerRowEntryStatus, -- jnxBgpM2CfgPeerIndex, *** JNX *** jnxBgpM2CfgPeerStatus, jnxBgpM2CfgPeerConnectRetryInterval, jnxBgpM2CfgPeerHoldTimeConfigured, jnxBgpM2CfgPeerKeepAliveConfigured, jnxBgpM2CfgPeerMinASOrigInterval, jnxBgpM2CfgPeerMinRouteAdverInter } STATUS current DESCRIPTION "Configuration objects for BGP peers." ::= { jnxBgpM2MIBGroups 15 } jnxBgpM2PeerAuthConfigurationGroup OBJECT-GROUP OBJECTS { jnxBgpM2CfgPeerAuthEnabled, jnxBgpM2CfgPeerAuthCode, jnxBgpM2CfgPeerAuthValue } STATUS current DESCRIPTION "Configuration objects for BGP peers that support authentication." ::= { jnxBgpM2MIBGroups 16 } jnxBgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP OBJECTS { jnxBgpM2CfgRouteReflector, jnxBgpM2CfgClusterId, jnxBgpM2CfgPeerReflectorClient } STATUS current DESCRIPTION "Configuration objects for BGP peers that support route reflection." ::= { jnxBgpM2MIBGroups 17 } jnxBgpM2PeerAsConfederationCfgGroup OBJECT-GROUP OBJECTS { jnxBgpM2CfgConfederationRouter, jnxBgpM2CfgConfederationId, jnxBgpM2CfgPeerConfedMember } STATUS current DESCRIPTION "Configuration objects for BGP peers that support BGP confederations." ::= { jnxBgpM2MIBGroups 18 } jnxBgpM2MIBNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { jnxBgpM2Established, jnxBgpM2BackwardTransition } STATUS current DESCRIPTION "This group contains objects for notifications supported by this mib module." ::= { jnxBgpM2MIBGroups 19 } jnxBgpM2Rfc2545Group OBJECT-GROUP OBJECTS { jnxBgpM2LinkLocalNextHopPresent, jnxBgpM2LinkLocalNextHop } STATUS current DESCRIPTION "This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545." ::= { jnxBgpM2MIBGroups 20 } END