ETHER-WIS DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Gauge32, transmission FROM SNMPv2-SMI ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF sonetMediumStuff2, sonetSectionStuff2, sonetLineStuff2, sonetFarEndLineStuff2, sonetPathStuff2, sonetFarEndPathStuff2, sonetMediumType, sonetMediumLineCoding, sonetMediumLineType, sonetMediumCircuitIdentifier, sonetMediumLoopbackConfig, sonetSESthresholdSet, sonetPathCurrentWidth FROM SONET-MIB; etherWisMIB MODULE-IDENTITY LAST-UPDATED "200309190000Z" -- September 19, 2003 ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG charter: http://www.ietf.org/html.charters/hubmib-charter.html Mailing Lists: General Discussion: hubmib@ietf.org To Subscribe: hubmib-request@ietf.org In Body: subscribe your_email_address Chair: Dan Romascanu Postal: Avaya Inc. Atidim Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: dromasca@avaya.com Editor: C. M. Heard Postal: 600 Rainbow Dr. #141 Mountain View, CA 94041-2542 USA Tel: +1 650-964-8391 E-mail: heard@pobox.com " DESCRIPTION "The objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN Interface Sublayer (WIS). The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2000 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002, 'IEEE Standard for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer and Management Parameters for 10 Gb/s Operation', 30 August 2002. Of particular interest are Clause 50, 'WAN Interface Sublayer (WIS), type 10GBASE-W', Clause 30, '10Mb/s, 100Mb/s, 1000Mb/s, and 10Gb/s MAC Control, and Link Aggregation Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3637 ; see the RFC itself for full legal notices." REVISION "200309190000Z" -- September 19, 2003 DESCRIPTION "Initial version, published as RFC 3637 ." ::= { transmission 134 } -- The main sections of the module etherWisObjects OBJECT IDENTIFIER ::= { etherWisMIB 1 } etherWisObjectsPath OBJECT IDENTIFIER ::= { etherWisMIB 2 } etherWisConformance OBJECT IDENTIFIER ::= { etherWisMIB 3 } -- groups in the Ethernet WIS MIB module etherWisDevice OBJECT IDENTIFIER ::= { etherWisObjects 1 } etherWisSection OBJECT IDENTIFIER ::= { etherWisObjects 2 } etherWisPath OBJECT IDENTIFIER ::= { etherWisObjectsPath 1 } etherWisFarEndPath OBJECT IDENTIFIER ::= { etherWisObjectsPath 2 } -- The Device group -- These objects provide WIS extensions to -- the SONET-MIB Medium Group. etherWisDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherWisDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Ethernet WIS devices" ::= { etherWisDevice 1 } etherWisDeviceEntry OBJECT-TYPE SYNTAX EtherWisDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Ethernet WIS device table. For each instance of this object there MUST be a corresponding instance of sonetMediumEntry." INDEX { ifIndex } ::= { etherWisDeviceTable 1 } EtherWisDeviceEntry ::= SEQUENCE { etherWisDeviceTxTestPatternMode INTEGER, etherWisDeviceRxTestPatternMode INTEGER, etherWisDeviceRxTestPatternErrors Gauge32 } etherWisDeviceTxTestPatternMode OBJECT-TYPE SYNTAX INTEGER { none(1), squareWave(2), prbs31(3), mixedFrequency(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the transmit test pattern mode. The value none(1) puts the the WIS transmit path into the normal operating mode. The value squareWave(2) puts the WIS transmit path into the square wave test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.1. The value prbs31(3) puts the WIS transmit path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.2. The value mixedFrequency(4) puts the WIS transmit path into the mixed frequency test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. Any attempt to set this object to a value other than none(1) when the corresponding instance of ifAdminStatus has the value up(1) MUST be rejected with the error inconsistentValue, and any attempt to set the corresponding instance of ifAdminStatus to the value up(1) when an instance of this object has a value other than none(1) MUST be rejected with the error inconsistentValue." REFERENCE "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and checker, 45.2.2.6, 10G WIS control 2 register (2.7), and 45.2.2.7.2, PRBS31 pattern testing ability (2.8.1)." ::= { etherWisDeviceEntry 1 } etherWisDeviceRxTestPatternMode OBJECT-TYPE SYNTAX INTEGER { none(1), prbs31(3), mixedFrequency(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls the receive test pattern mode. The value none(1) puts the the WIS receive path into the normal operating mode. The value prbs31(3) puts the WIS receive path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.2. The value mixedFrequency(4) puts the WIS receive path into the mixed frequency test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. Any attempt to set this object to a value other than none(1) when the corresponding instance of ifAdminStatus has the value up(1) MUST be rejected with the error inconsistentValue, and any attempt to set the corresponding instance of ifAdminStatus to the value up(1) when an instance of this object has a value other than none(1) MUST be rejected with the error inconsistentValue." REFERENCE "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and checker, 45.2.2.6, 10G WIS control 2 register (2.7), and 45.2.2.7.2, PRBS31 pattern testing ability (2.8.1)." ::= { etherWisDeviceEntry 2 } etherWisDeviceRxTestPatternErrors OBJECT-TYPE SYNTAX Gauge32 ( 0..65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object counts the number of errors detected when the WIS receive path is operating in the PRBS31 test pattern mode. It is reset to zero when the WIS receive path initially enters that mode, and it increments each time the PRBS pattern checker detects an error as described in [IEEE 802.3 Std.] subclause 50.3.8.2 unless its value is 65535, in which case it remains unchanged. This object is writeable so that it may be reset upon explicit request of a command generator application while the WIS receive path continues to operate in PRBS31 test pattern mode." REFERENCE "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and checker, 45.2.2.7.2, PRBS31 pattern testing ability (2.8.1), and 45.2.2.8, 10G WIS test pattern error counter register (2.9)." ::= { etherWisDeviceEntry 3 } -- The Section group -- These objects provide WIS extensions to -- the SONET-MIB Section Group. etherWisSectionCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherWisSectionCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for the current state of Ethernet WIS sections." ::= { etherWisSection 1 } etherWisSectionCurrentEntry OBJECT-TYPE SYNTAX EtherWisSectionCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the etherWisSectionCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetSectionCurrentEntry." INDEX { ifIndex } ::= { etherWisSectionCurrentTable 1 } EtherWisSectionCurrentEntry ::= SEQUENCE { etherWisSectionCurrentJ0Transmitted OCTET STRING, etherWisSectionCurrentJ0Received OCTET STRING } etherWisSectionCurrentJ0Transmitted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the 16-octet section trace message that is transmitted in the J0 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the section trace function is not used, and the implementation SHOULD use that value (or a cyclic shift thereof) as a default if no other value has been set." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.8, aJ0ValueTX." ::= { etherWisSectionCurrentEntry 1 } etherWisSectionCurrentJ0Received OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the 16-octet section trace message that was most recently received in the J0 byte." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.9, aJ0ValueRX." ::= { etherWisSectionCurrentEntry 2 } -- The Path group -- These objects provide WIS extensions to -- the SONET-MIB Path Group. etherWisPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherWisPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for the current state of Ethernet WIS paths." ::= { etherWisPath 1 } etherWisPathCurrentEntry OBJECT-TYPE SYNTAX EtherWisPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the etherWisPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetPathCurrentEntry." INDEX { ifIndex } ::= { etherWisPathCurrentTable 1 } EtherWisPathCurrentEntry ::= SEQUENCE { etherWisPathCurrentStatus BITS, etherWisPathCurrentJ1Transmitted OCTET STRING, etherWisPathCurrentJ1Received OCTET STRING } etherWisPathCurrentStatus OBJECT-TYPE SYNTAX BITS { etherWisPathLOP(0), etherWisPathAIS(1), etherWisPathPLM(2), etherWisPathLCD(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the current status of the path payload with a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisPathLOP(0) This bit is set to indicate that an LOP-P (Loss of Pointer - Path) defect is being experienced. Note: when this bit is set, sonetPathSTSLOP MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathAIS(1) This bit is set to indicate that an AIS-P (Alarm Indication Signal - Path) defect is being experienced. Note: when this bit is set, sonetPathSTSAIS MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathPLM(1) This bit is set to indicate that a PLM-P (Payload Label Mismatch - Path) defect is being experienced. Note: when this bit is set, sonetPathSignalLabelMismatch MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathLCD(3) This bit is set to indicate that an LCD-P (Loss of Codegroup Delination - Path) defect is being experienced. Since this defect is detected by the PCS and not by the path layer itself, there is no corresponding bit in sonetPathCurrentStatus." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.18, aPathStatus." ::= { etherWisPathCurrentEntry 1 } etherWisPathCurrentJ1Transmitted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the 16-octet path trace message that is transmitted in the J1 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the path trace function is not used, and the implementation SHOULD use that value (or a cyclic shift thereof) as a default if no other value has been set." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.23, aJ1ValueTX." ::= { etherWisPathCurrentEntry 2 } etherWisPathCurrentJ1Received OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the 16-octet path trace message that was most recently received in the J1 byte." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.24, aJ1ValueRX." ::= { etherWisPathCurrentEntry 3 } -- The Far End Path group -- These objects provide WIS extensions to -- the SONET-MIB Far End Path Group. etherWisFarEndPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherWisFarEndPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for the current far-end state of Ethernet WIS paths." ::= { etherWisFarEndPath 1 } etherWisFarEndPathCurrentEntry OBJECT-TYPE SYNTAX EtherWisFarEndPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the etherWisFarEndPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetFarEndPathCurrentEntry." INDEX { ifIndex } ::= { etherWisFarEndPathCurrentTable 1 } EtherWisFarEndPathCurrentEntry ::= SEQUENCE { etherWisFarEndPathCurrentStatus BITS } etherWisFarEndPathCurrentStatus OBJECT-TYPE SYNTAX BITS { etherWisFarEndPayloadDefect(0), etherWisFarEndServerDefect(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the current status at the far end of the path using a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisFarEndPayloadDefect(0) A far end payload defect (i.e., far end PLM-P or LCD-P) is currently being signaled in G1 bits 5-7. etherWisFarEndServerDefect(1) A far end server defect (i.e., far end LOP-P or AIS-P) is currently being signaled in G1 bits 5-7. Note: when this bit is set, sonetPathSTSRDI MUST be set in the corresponding instance of sonetPathCurrentStatus." REFERENCE "[IEEE 802.3 Std.], 30.8.1.1.25, aFarEndPathStatus." ::= { etherWisFarEndPathCurrentEntry 1 } -- -- Conformance Statements -- etherWisGroups OBJECT IDENTIFIER ::= { etherWisConformance 1 } etherWisCompliances OBJECT IDENTIFIER ::= { etherWisConformance 2 } -- Object Groups etherWisDeviceGroupBasic OBJECT-GROUP OBJECTS { etherWisDeviceTxTestPatternMode, etherWisDeviceRxTestPatternMode } STATUS current DESCRIPTION "A collection of objects that support test features required of all WIS devices." ::= { etherWisGroups 1 } etherWisDeviceGroupExtra OBJECT-GROUP OBJECTS { etherWisDeviceRxTestPatternErrors } STATUS current DESCRIPTION "A collection of objects that support optional WIS device test features." ::= { etherWisGroups 2 } etherWisSectionGroup OBJECT-GROUP OBJECTS { etherWisSectionCurrentJ0Transmitted, etherWisSectionCurrentJ0Received } STATUS current DESCRIPTION "A collection of objects that provide required information about a WIS section." ::= { etherWisGroups 3 } etherWisPathGroup OBJECT-GROUP OBJECTS { etherWisPathCurrentStatus, etherWisPathCurrentJ1Transmitted, etherWisPathCurrentJ1Received } STATUS current DESCRIPTION "A collection of objects that provide required information about a WIS path." ::= { etherWisGroups 4 } etherWisFarEndPathGroup OBJECT-GROUP OBJECTS { etherWisFarEndPathCurrentStatus } STATUS current DESCRIPTION "A collection of objects that provide required information about the far end of a WIS path." ::= { etherWisGroups 5 } -- Compliance Statements etherWisCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for interfaces that include the Ethernet WIS. Compliance with the following external compliance statements is prerequisite: MIB Module Compliance Statement ---------- -------------------- IF-MIB ifCompliance3 IF-INVERTED-STACK-MIB ifInvCompliance EtherLike-MIB dot3Compliance2 MAU-MIB mauModIfCompl3" MODULE -- this module MANDATORY-GROUPS { etherWisDeviceGroupBasic, etherWisSectionGroup, etherWisPathGroup, etherWisFarEndPathGroup } OBJECT etherWisDeviceTxTestPatternMode SYNTAX INTEGER { none(1), squareWave(2), mixedFrequency(4) } DESCRIPTION "Support for values other than none(1), squareWave(2), and mixedFrequency(4) is not required." OBJECT etherWisDeviceRxTestPatternMode SYNTAX INTEGER { none(1), mixedFrequency(4) } DESCRIPTION "Support for values other than none(1) and mixedFrequency(4) is not required." GROUP etherWisDeviceGroupExtra DESCRIPTION "Implementation of this group, along with support for the value prbs31(3) for etherWisDeviceTxTestPatternMode and etherWisDeviceRxTestPatternMode, is necessary if the optional PRBS31 test pattern mode is to be supported." OBJECT etherWisDeviceRxTestPatternErrors WRITE-SYNTAX Gauge32 ( 0 ) DESCRIPTION "An implementation is not required to allow values other than zero to be written to this object." MODULE SONET-MIB MANDATORY-GROUPS { sonetMediumStuff2, sonetSectionStuff2, sonetLineStuff2, sonetFarEndLineStuff2, sonetPathStuff2, sonetFarEndPathStuff2 } OBJECT sonetMediumType SYNTAX INTEGER { sonet(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, nor is support for any value other than sonet(1)." OBJECT sonetMediumLineCoding SYNTAX INTEGER { sonetMediumNRZ(4) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, nor is support for any value other than sonetMediumNRZ(4)." OBJECT sonetMediumLineType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT sonetMediumCircuitIdentifier MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT sonetMediumLoopbackConfig SYNTAX BITS { sonetNoLoop(0), sonetFacilityLoop(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, nor is support for values other than sonetNoLoop(0) and sonetFacilityLoop(1)." OBJECT sonetSESthresholdSet MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the enumerated values need be supported." OBJECT sonetPathCurrentWidth SYNTAX INTEGER { sts192cSTM64(6) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, nor is support for any value other than sts192cSTM64(6)." ::= { etherWisCompliances 1 } END